The genome sequence of wall speedwell, Veronica arvensis L. (Lamiales: Plantaginaceae) Authors: Maarten J. M. Christenhusz, Royal Botanic Gardens Kew Genome Acquisition Lab, Plant Genome Sizing Collective, Darwin Tree of Life Barcoding collective, Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team, Wellcome Sanger Institute Scientific Operations: Sequencing Operations, Wellcome Sanger Institute Tree of Life Core Informatics team, Tree of Life Core Informatics collective, Darwin Tree of Life Consortium, Samuel J. Smit, Nicholas P. Tippery, Dirk C. Albach, Automated Benchmarking Published: 2026 ABSTRACT We present a genome assembly of Veronica arvensis (wall speedwell; Streptophyta; Magnoliopsida; Lamiales; Plantaginaceae). The assembly consists of two haplotypes with total lengths of 368.79 megabases and 369.14 megabases. Most of the haplotype 1 assembly (99.61%) was scaffolded into eight chromosomal pseudomolecules. Haplotype 2 was assembled to scaffold level. The mitochondrial genome assembly has a length of 280.62 kilobases and the plastid genome assembly has a length of 149.37 kilobases. Gene annotation of the haplotype 1 assembly by Ensembl identified 23,864 protein-coding genes. This assembly was generated as part of the Darwin Tree of Life project, which produces reference genomes for eukaryotic species found in Britain and Ireland. Species taxonomy Eukaryota; Viridiplantae; Streptophyta; Streptophytina; Embryophyta; Tracheophyta; Euphyllophyta; Spermatophyta; Magnoliopsida; Mesangiospermae; eudicotyledons; Gunneridae; Pentapetalae; asterids; lamiids; Lamiales; Plantaginaceae; Veroniceae; Veronica; Veronica subgen. Chamaedrys; Veronica arvensis L. (NCBI:txid46032) Background Veronica arvensis L. (wall speedwell) (Figure 1) is a small annual herb with hairy, sprawling to erect stems, usually 1–20 cm tall but occasionally reaching 30 cm. Its leaves are oval to triangular, with shallow teeth or lobes. The bright blue flowers are 2–3 mm across and almost stalkless, clustered among leaf-like bracts towards the stem tips. Flowering occurs from March to October, and the flowers open fully only in bright sunshine ( Harrap, 2025). Native to Britain and Ireland, V. arvensis grows in cultivated land, open grassland, heaths, sand dunes and disturbed habitats, including paths, walls and pavements, usually on dry soils. In closed grassland it may be confined to anthills. Its seeds remain viable in the soil for several years. The species is widely naturalised beyond Europe. There is no evidence of significant change in its British and Irish distribution at the 10 km square scale, although more systematic surveys have improved recording in Ireland and upland Britain ( Stroh & Horsfall, 2023). We sequenced the genome of Veronica arvensis as part of the Darwin Tree of Life Project, which aims to generate high-quality reference genomes for all named eukaryotic species in Britain and Ireland to support research, conservation, and the sustainable use of biodiversity. The sequenced specimen was collected from Ham, Surrey, UK. V. arvensis photographed by Gilles Ayotte Methods Sample acquisition, flow cytometry and DNA barcoding A specimen of V. arvensis (specimen ID KDTOL10424, ToLID daVerArve1) was used for genome sequencing. It was collected from Ham, Surrey, UK (latitude 51.4356, longitude −0.3245) on 2022-05-06. The specimen was collected and identified by Maarten Christenhusz. The herbarium voucher for the sequenced plant (collector number MC9331) is deposited in the Herbarium, Royal Botanic Gardens, Kew (K), as specimen K001400958. The genome size was estimated by flow cytometry following the ‘one-step’ method outlined in Pellicer et al. (2021) and using propidium iodide as the fluorochrome. The General Purpose Buffer (GPB) supplemented with 3% PVP was used for isolation of nuclei ( Loureiro et al., 2007), and the internal calibration standard was Solanum lycopersicum L. ‘Stupické polní rané’ with an assumed 1C-value of 968 Mb ( Doležel et al., 2007). The initial identification was verified by an additional DNA barcoding process according to the framework developed by Twyford et al. (2024). Part of the plant specimen was preserved in silica gel desiccant ( Chase & Hills, 1991). DNA extracted from the dried plant was amplified by PCR for standard barcode markers, with the amplicons sequenced and compared to public sequence databases including GenBank and the Barcode of Life Database (BOLD) ( Ratnasingham & Hebert, 2007). Following whole genome sequence generation, the relevant DNA barcode region was also used alongside the initial barcoding data for sample tracking at the WSI ( Twyford et al. , 2024). The standard operating procedures for Darwin Tree of Life barcoding are available on protocols.io. Nucleic acid extraction High molecular weight (HMW) DNA extraction protocols developed by the Tree of Life Core Laboratory at the Wellcome Sanger Institute (WSI) are available on protocols.io ( Howard et al., 2025). Tissue from the daVerArve1 sample was weighed and triaged to select the appropriate extraction workflow. HMW DNA was prepared for four PacBio HiFi libraries: DTOL13735929, DTOL_RD14581306, DTOL_RD14581317 and DTOL12955883. The tissue input, HMW DNA extraction, downstream fragmentation and clean-up, and post-shearing quality-control measurements for each PacBio library are summarised in Table 1. The concentration of the sheared and purified DNA was assessed with a NanoDrop spectrophotometer and a Qubit Fluorometer using the Qubit dsDNA High Sensitivity Assay kit. Fragment size distribution was evaluated by running the sample on the Femto Pulse system. Table 1. DNA extraction and post-extraction processing for each PacBio library used for V. arvensis. PacBio library ID Tissue preparation HMW DNA extraction Fragmentation and clean-up Post-shearing QC DTOL13735929leaf; cryoPREP Automated Plant Organic Extraction Fragmentation: Diagenode Megaruptor3 for LI PacBio; clean-up: Automated SPRI Qubit 30.6 ng/μL; fragment size 19.8 kbDTOL_RD14581306leaf; cryoPREP Automated Plant MagAttract v4 Fragmentation: Diagenode Megaruptor3 for LI PacBio; clean-up: Automated SPRI Not recordedDTOL_RD14581317leaf; cryoPREP Automated Plant Organic Extraction Fragmentation: Diagenode Megaruptor3 for LI PacBio; clean-up: Automated SPRI Not recordedDTOL1295588354.6 mg leaf; cryoPREP Automated Plant MagAttract v4 Fragmentation: Diagenode Megaruptor3 for LI PacBio; clean-up: Manual SPRI Qubit 23.8 ng/μL; fragment size 18.1 kb; GQN 8 DNA extraction and post-extraction processing for each PacBio library used for V. arvensis. PacBio HiFi library preparation and sequencing Library preparation and sequencing took place in the WSI Scientific Operations core. Libraries DTOL13735929, DTOL_RD14581306, DTOL_RD14581317 and DTOL12955883 were prepared with the SMRTbell Prep Kit 3.0 (Pacific Biosciences) according to the manufacturer’s instructions. The kit includes reagents for end repair/A-tailing, adapter ligation, post-ligation SMRTbell bead clean-up, and nuclease treatment. Size selection and clean-up were performed using diluted AMPure PB beads (Pacific Biosciences). DNA concentration was quantified with a Qubit Fluorometer v4.0 (Thermo Fisher Scientific) and the Qubit 1X dsDNA HS assay kit. Final library fragment size was assessed with the Agilent Femto Pulse Automated Pulsed Field CE Instrument (Agilent Technologies) using the gDNA 55 kb BAC analysis kit. Libraries DTOL13735929, DTOL_RD14581306 and DTOL_RD14581317 were sequenced on a Revio instrument (Pacific Biosciences, California, USA). The prepared libraries selected for multiplexing were pooled based on genome size, library molarity, and the intended plex level. Primers were annealed and polymerases were bound to generate circularised complexes, following the manufacturer’s instructions. Complexes were purified using SMRTbell beads, diluted to the Revio loading concentration, and spiked with a Revio sequencing internal control. The pooled libraries were sequenced on a Revio 25M Plex SMRT cell in a 4-plex; 3-plex; 1-plex run. SMRT Link software (Pacific Biosciences), a web-based workflow manager, was used to configure and monitor the runs and to carry out primary and secondary data analysis. Library DTOL12955883 was sequenced using the Sequel IIe system (Pacific Biosciences, California, USA). The concentration of the library loaded onto the Sequel system was in the range 40–135 pM. SMRT Link software, a PacBio web-based workflow manager, was used to set up and monitor the run, and to perform primary and secondary analysis of the data upon completion. Hi-C Sample preparation and crosslinking Hi-C data were generated from the daVerArve1 leaf sample using the Arima-HiC v2 kit (Arima Genomics). Tissue was finely ground using the Covaris cryoPREP Dry Pulverizer (Covaris), and then subjected to nuclei isolation. Nuclei were isolated using a modified protocol based on the Qiagen QProteome Cell Compartment Kit (Qiagen), in which only the Lysis and CE2 buffers were used, with QIAshredder spin columns. After isolation, nuclei were fixed using formaldehyde to a final concentration of 2% to crosslink the DNA. The crosslinked DNA was then digested and biotinylated according to the manufacturer’s instructions. A clean-up step was performed with SPRIselect beads before library preparation. DNA concentration was quantified using the Qubit Fluorometer v4.0 (Thermo Fisher Scientific) and the Qubit HS Assay Kit, following the manufacturer’s instructions. Hi-C library preparation and sequencing Biotinylated DNA constructs were fragmented using a Covaris E220 sonicator and size-selected to 400–600 bp using SPRISelect beads. DNA was enriched with Arima-HiC v2 kit Enrichment beads. End repair, A-tailing, and adapter ligation were carried out with the NEBNext Ultra II DNA Library Prep Kit (New England Biolabs), following a modified protocol where library preparation occurs while DNA remains bound to the Enrichment beads. Libraries were amplified with KAPA HiFi HotStart mix and a custom Unique Dual Index (UDI) barcode set (Integrated DNA Technologies). Depending on sample concentration and biotinylation percentage determined at the crosslinking stage, libraries were amplified with 10–16 PCR cycles. Post-PCR clean-up was performed with SPRISelect beads. Libraries were quantified using the AccuClear Ultra High Sensitivity dsDNA Standards Assay Kit (Biotium) and a FLUOstar Omega plate reader (BMG Labtech). Prior to sequencing, libraries were normalised to 10 ng/μL. Normalised libraries were quantified again to create equimolar and/or weighted 2.8 nM pools. Pool concentrations were checked using the Agilent 4200 TapeStation (Agilent) with High Sensitivity D500 reagents before sequencing. Libraries were sequenced on the Illumina NovaSeq 6000, generating paired-end 150-bp reads. Genome assembly Prior to assembly of the PacBio HiFi reads, a database of k-mer counts ( k = 31) was generated from the filtered reads using FastK. The k-mer frequency distribution was analysed with GenomeScope (version 2.1.0) ( Ranallo-Benavidez et al., 2020), providing fitted point estimates of genome size, heterozygosity and repeat content. The HiFi reads were assembled using Hifiasm in Hi-C phasing mode ( Cheng et al., 2021, 2022), producing two haplotypes. Hi-C reads ( Rao et al. , 2014) were mapped to contigs using bwa-mem2 ( Vasimuddin et al., 2019). Contigs were further scaffolded with Hi-C data in YaHS ( Zhou et al., 2023), using the --break option for handling potential misassemblies. The scaffolded assemblies were evaluated using Gfastats ( Formenti et al. , 2022), BUSCO ( Manni et al., 2021) and MerquryFK ( Rhie et al., 2020). The organelle genomes were assembled using OATK ( Zhou et al., 2025). The comparator for the mitochondrial assembly was the mitochondrial genome of Plantago ovata (NC_072975.1). Assembly curation The assembly was decontaminated using the Assembly Screen for Cobionts and Contaminants ( ASCC) pipeline. The flat files and maps for curation were generated with TreeVal. Manual curation was conducted primarily in PretextView and HiGlass ( Kerpedjiev et al. , 2018). Scaffolds were visually inspected and corrected as described by Howe et al. (2021). The two haplotype assemblies were combined for curation. Manual corrections included 18 breaks, 42 joins, and removal of 128 haplotypic duplications. This reduced the scaffold count by 45.9%. The curation process is described at sanger-tol/curation-resources. A Hi-C contact map of the haplotype 1 assembly was generated with PretextSnapshot. Assembly quality assessment The MerquryFK tool ( Rhie et al., 2020) was run in a Singularity container ( Kurtzer et al., 2017) to evaluate k-mer completeness and assembly quality for both haplotypes using the k-mer database ( k = 31) computed prior to genome assembly. The analysis outputs included assembly QV scores and completeness statistics. The haplotype 1 assembly was assessed using BlobToolKit ( Challis et al., 2020). PacBio reads were mapped to the assembly to derive sequence coverage, and BUSCO ( Manni et al., 2021) was used to assess gene-set completeness. DIAMOND BLASTp searches of extracted BUSCO proteins and DIAMOND BLASTx searches of assembly sequences against UniProt Reference Proteomes ( Buchfink et al., 2021), followed by BLASTn searches of sequences without DIAMOND BLASTx hits against the NCBI nt database ( Altschul et al., 1990), supported taxonomic assignment. Coverage, sequence composition, taxonomic assignment and BUSCO results were integrated into a BlobDir for interactive inspection and visualisation. The snail and blob plots were rendered locally from this hosted BlobDir using BlobTk v0.8.3. The scaffold-length radial scale function for the snail plot was set to linear ( Challis & Blaxter, 2026). The blob plot used circular markers with area proportional to scaffold length ( Challis et al., 2020). Genome sequence report Sequence data The genome of a specimen of V. arvensis was sequenced using Pacific Biosciences single-molecule HiFi long reads, generating 12.50 Gb (gigabases) from 1.00 million reads. We assembled the genome from these reads. GenomeScope analysis using a p = 2 model gave a k-mer-based haploid genome size estimate of 412.89 Mb, with heterozygosity of 0.10% and repeat content of 39.80%; the full-model fit was 97.91% (Figure 2). Using flow cytometry, the genome size (1C‐value) of the sample was estimated to be 0.45 pg, equivalent to 440.00 Mb. These estimates guided expectations for the assembly. The sequencing data provided approximately 29× coverage of the haplotype 1 assembly. Hi-C sequencing produced 117.16 Gb from 387.95 million read pairs, which were used to scaffold the haplotype 1 assembly. Table 2 summarises the specimen and sequencing details. GenomeScope model fitted to the k-mer frequency distribution. The plot shows the observed and modelled k-mer spectra used to estimate genome size, heterozygosity and repeat content from unassembled sequencing reads. Table 2. Specimen and sequencing data for V. arvensis (BioProject PRJEB78314) Platform PacBio HiFi Hi-C ToLID daVerArve1daVerArve1 Specimen ID KDTOL10424KDTOL10424 BioSample (source individual) SAMEA14449809 SAMEA14449809 BioSample (tissue) SAMEA14449836; SAMEA14449835; SAMEA14449833 SAMEA14449833 Tissue leafleaf Instrument Revio (3 runs); Sequel IIe (1 run)Illumina NovaSeq 6000 Library ID & run accession(s) DTOL13735929: ERR13420764; DTOL_RD14581306: ERR13420765; DTOL_RD14581317: ERR13420766; DTOL12955883: ERR13420767 ERR13389751 Read count total 1.00 million reads387.95 million read pairs Base count total 12.50 Gb117.16 Gb Specimen and sequencing data for V. arvensis (BioProject PRJEB78314) Assembly statistics The genome was assembled into two haplotypes using Hi-C phasing. The haplotype 1 assembly was curated to chromosome level, while haplotype 2 was assembled to scaffold level. The haplotype 1 assembly, which is proposed as the reference assembly for this species, has a total length of 368.79 Mb in 44 scaffolds (excluding organelle sequences), with 101 gaps, and a scaffold N50 of 45.19 Mb (Table 3). The haplotype 1 assembly has a scaffold auN of 46.4 Mb. Table 3. Genome assembly statistics for V. arvensis Genome assembly Haplotype 1 Haplotype 2 Assembly name daVerArve1.hap1.1daVerArve1.hap2.1 Assembly accession GCA_964211895.1 GCA_964211885.1 Assembly level chromosomescaffold Span (Mb) 368.79369.14 Number of chromosomes 8- Number of contigs 145248 Contig N50 (Mb) 5.695.01 Number of scaffolds (excluding organelle sequences) 44128 Scaffold N50 (Mb) 45.1944.32 Scaffold auN (Mb) 46.445.5 Longest scaffold length (Mb) 58.1357.57 Organelles Mitochondrial genome: 280.62 kb; Plastid genome: 149.37 kb- Genome assembly statistics for V. arvensis Most of the haplotype 1 assembly sequence (99.61%) was assigned to 8 chromosome-level scaffolds. These chromosome-level scaffolds, confirmed by Hi-C data, are named according to size (Figure 3; Table 4). The mitochondrial genome (length 280.62 kb, OZ125091.1) and plastid genome (length 149.37 kb, OZ125092.1) were also assembled. These sequences are included as contigs in the multifasta file of the haplotype 1 genome submission and as standalone records. Hi-C contact map of the V. arvensis haplotype 1 assembly. Assembled chromosomes are shown in order of size and labelled along the axes, with a megabase scale shown below. The plot was generated using PretextSnapshot. Table 4. Chromosomal pseudomolecules in the haplotype 1 genome assembly of V. arvensis daVerArve1 INSDC accession Molecule Length (Mb) GC% OZ125083.1158.1338OZ125084.1251.3236.50OZ125085.1345.5837.50OZ125086.1445.1936.50OZ125087.1543.7937.50OZ125088.1643.3237OZ125089.1740.6437OZ125090.1839.3837 Chromosomal pseudomolecules in the haplotype 1 genome assembly of V. arvensis daVerArve1 Assembly quality metrics For the haplotype 1 assembly, the estimated QV is 67.2, and for the haplotype 2 assembly, 64.2. When the two haplotypes are combined, the assembly achieves an estimated QV of 65.4. The k-mer completeness is 98.83% for the haplotype 1 assembly, 97.94% for the haplotype 2 assembly, and 99.09% for the combined haplotypes (Figure 4). BUSCO analysis using the eudicots_odb10 reference set ( n = 2,326) identified 95.5% of the expected gene set (single = 90.3%, duplicated = 5.2%) in the haplotype 1 assembly. For the haplotype 2 assembly, BUSCO v.5.5.0 analysis identified 95.1% of the expected gene set (single = 90.0%, duplicated = 5.1%). Evaluation of k-mer completeness using MerquryFK. This plot illustrates the recovery of k‐mers from the original read data in the haplotype 1 assembly, the haplotype 2 assembly and the combined haplotypes. The horizontal axis represents k‐mer multiplicity, and the vertical axis shows the number of k‐mers. The black curve represents k‐mers that appear in the reads but are not assembled, while the remaining curves correspond to k‐mers recovered in the assemblies shown. The snail plot in Figure 5 provides a summary of assembly contiguity, cumulative scaffold count, sequence composition and BUSCO completeness for the haplotype 1 assembly ( Challis & Blaxter, 2026). The relative sizes of the longest scaffold, scaffold N50 and N90, together with the dark-grey scaffold-length distribution, show how much of the assembly is contained in long scaffolds. The outer composition track shows variation in GC, AT and N content, while the central track shows the cumulative scaffold count and the BUSCO inset summarises gene-set completeness. The blob plot in Figure 6 displays scaffolds from the haplotype 1 assembly by GC proportion and base coverage. Marker area is proportional to scaffold length, and colour indicates taxonomic assignment ( Challis et al., 2020). Assembly metrics for daVerArve1.hap1.1, the haplotype 1 assembly. The BlobToolKit snail plot provides an overview of assembly metrics and BUSCO gene completeness. The circumference represents the length of the haplotype 1 assembly, and the main plot is divided into 1,000 bins around the circumference. The outermost blue tracks display the distribution of GC, AT, and N percentages across the bins. Scaffolds are arranged clockwise from longest to shortest and are depicted in dark grey. Scaffold length is shown on a linear radial scale, scaled to the longest scaffold. Red shading indicates the longest scaffold, and the deeper orange and pale orange shading represent the N50 and N90 lengths. The summary statistics include scaffold auN, the area under the scaffold Nx curve. The light grey spiral at the centre shows the cumulative scaffold count on a logarithmic scale. A summary of complete, fragmented, duplicated, and missing BUSCO genes in the eudicots_odb10 set is presented at the top right. The assembly can be explored interactively in the BlobToolKit viewer. BlobToolKit blob plot for daVerArve1.hap1.1, the haplotype 1 assembly. The plot shows base coverage (vertical axis) and GC content (horizontal axis). Circles represent scaffolds; marker area is proportional to scaffold length, and colour indicates taxonomic assignment. The histograms along the axes display the total length of sequences distributed across different levels of coverage and GC content. The assembly can be explored interactively in the BlobToolKit viewer. Table 5 lists the assembly metric benchmarks adapted from Rhie et al.. (2021) and the Earth BioGenome Project (EBP) Report on Assembly Standards. The three-part EBP metric calculated for the haplotype 1 assembly is 6.C.Q67. Table 5. Earth BioGenome Project summary metrics for the V. arvensis assembly Measure Value Benchmark EBP summary (haplotype 1)6.C.Q67 6.C.Q40 Contig N50 length5.69 Mb > 1 Mb Scaffold N50 length45.19 Mb = chromosome N50 Consensus quality (QV)Haplotype 1: 67.2; haplotype 2: 64.2; combined: 65.4 ≥ 40 k-mer completenessHaplotype 1: 98.83%; Haplotype 2: 97.94%; combined: 99.09% > 90% BUSCOHaplotype 1: C:95.5% [S:90.3%, D:5.2%], F:0.5%, M:4.0%, n:2,326; Haplotype 2: C:95.1% [S:90.0%, D:5.1%], F:0.5%, M:4.4%, n:2,326 S > 90%; D < 5% Percentage of assembly assigned to chromosomes99.61% ≥ 90% Notes: The EBP summary uses log10(Contig N50); chromosome-level (C) or log10(Scaffold N50); Q (Merqury QV). BUSCO v5.5.0 using the eudicots_odb10 lineage dataset: C=complete; S=single-copy; D=duplicated; F=fragmented; M=missing; n=orthologues. Earth BioGenome Project summary metrics for the V. arvensis assembly Notes: The EBP summary uses log10(Contig N50); chromosome-level (C) or log10(Scaffold N50); Q (Merqury QV). BUSCO v5.5.0 using the eudicots_odb10 lineage dataset: C=complete; S=single-copy; D=duplicated; F=fragmented; M=missing; n=orthologues. Genome annotation report The V. arvensis genome assembly (GCA_964211895.1) was annotated by Ensembl at the European Bioinformatics Institute (EBI). The annotation comprises 40,175 transcripts from 23,864 protein-coding genes and 7,057 non-coding genes. The average transcript length is 2,339.92 bp, with an average of 1.30 coding transcripts per gene and 4.95 exons per transcript. For further information about the annotation, please refer to the annotation page on Ensembl. Data availability European Nucleotide Archive: Veronica arvensis. Accession number PRJEB78314; https://identifiers.org/ena.embl/PRJEB78314. The genome sequence is released openly for reuse. The V. arvensis genome sequencing initiative is part of the Darwin Tree of Life Project ( PRJEB40665), the Sanger Institute Tree of Life Programme ( PRJEB43745) and AEGIS ( PRJEB80366). All raw sequence data and the haplotype assemblies have been deposited in INSDC databases. Raw data and assembly accession identifiers are reported in Table 2 and Table 3. Pipelines used for genome assembly at the WSI Tree of Life are available at https://pipelines.tol.sanger.ac.uk/pipelines. Table 6 lists software versions used in this study. Table 6. Software versions and sources Software Version Source BLAST2.14.0 https://ftp.ncbi.nlm.nih.gov/blast/executables/blast+/ BlobToolKit4.3.9 https://github.com/genomehubs/blobtoolkit BlobTk (hosted BlobDir)0.5.1 https://github.com/genomehubs/blobtk BlobTk (snail and blob plot renderer)0.8.3 https://github.com/genomehubs/blobtk BUSCO5.5.0 https://gitlab.com/ezlab/busco bwa-mem22.2.1 https://github.com/bwa-mem2/bwa-mem2 DIAMOND2.1.8 https://github.com/bbuchfink/diamond fasta_windows0.2.4 https://github.com/tolkit/fasta_windows FastK1.2 https://github.com/thegenemyers/FASTK GenomeScope2.1.0 https://github.com/tbenavi1/genomescope2.0 Gfastats1.3.6 https://github.com/vgl-hub/gfastats Hifiasm0.19.8-r603 https://github.com/chhylp123/hifiasm HiGlass1.13.4 https://github.com/higlass/higlass MerquryFK1.1.0-c1 https://github.com/thegenemyers/MERQURY.FK Minimap22.24-r1122 https://github.com/lh3/minimap2 Oatk0.9 https://github.com/c-zhou/oatk MultiQC1.14; 1.17 and 1.18 https://github.com/MultiQC/MultiQC Nextflow23.10.0 https://github.com/nextflow-io/nextflow PretextSnapshot0.0.6 https://github.com/sanger-tol/PretextSnapshot PretextView1.0.3 https://github.com/sanger-tol/PretextView samtools1.19.2 https://github.com/samtools/samtools sanger-tol/ascc0.1.0 https://github.com/sanger-tol/ascc sanger-tol/blobtoolkit0.6.0 https://github.com/sanger-tol/blobtoolkit sanger-tol/curationpretext1.4.2 https://github.com/sanger-tol/curationpretext Seqtk1.4-r122 https://github.com/lh3/seqtk Singularity3.9.0 https://github.com/sylabs/singularity TreeVal1.1.0 https://github.com/sanger-tol/treeval YaHS1.2a.2 https://github.com/c-zhou/yahs Software versions and sources Author information Members of the Royal Botanic Gardens Kew Genome Acquisition Lab Members of the Royal Botanic Gardens Kew Genome Acquisition Lab Members of the Plant Genome Sizing Collective Members of the Plant Genome Sizing Collective Members of the Darwin Tree of Life Barcoding collective Members of the Darwin Tree of Life Barcoding collective Members of the Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team Members of the Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team Members of Wellcome Sanger Institute Scientific Operations – Sequencing Operations Members of Wellcome Sanger Institute Scientific Operations – Sequencing Operations Members of the Wellcome Sanger Institute Tree of Life Core Informatics team Members of the Wellcome Sanger Institute Tree of Life Core Informatics team Members of the Tree of Life Core Informatics collective Members of the Tree of Life Core Informatics collective Members of the Darwin Tree of Life Consortium Members of the Darwin Tree of Life Consortium Wellcome Sanger Institute – Legal and Governance The materials that have contributed to this genome note have been supplied by a Darwin Tree of Life Partner. The submission of materials by a Darwin Tree of Life Partner is subject to the ‘Darwin Tree of Life Project Sampling Code of Practice’, which can be found in full on the Darwin Tree of Life website. By agreeing with and signing up to the Sampling Code of Practice, the Darwin Tree of Life Partner agrees they will meet the legal and ethical requirements and standards set out within this document in respect of all samples acquired for, and supplied to, the Darwin Tree of Life Project. Further, the Wellcome Sanger Institute employs a process whereby due diligence is carried out proportionate to the nature of the materials themselves, and the circumstances under which they have been/are to be collected and provided for use. The purpose of this is to address and mitigate any potential legal and/or ethical implications of receipt and use of the materials as part of the research project, and to ensure that in doing so we align with best practice wherever possible. The overarching areas of consideration are: Ethical review of provenance and sourcing of the material Ethical review of provenance and sourcing of the material Legality of collection, transfer and use (national and international) Legality of collection, transfer and use (national and international) Each transfer of samples is further undertaken according to a Research Collaboration Agreement or Material Transfer Agreement entered into by the Darwin Tree of Life Partner, Genome Research Limited (operating as the Wellcome Sanger Institute), and in some circumstances, other Darwin Tree of Life collaborators. The author reports the assembly of a chromosome-level genome for Veronica arvensis, a member of the Plantaginaceae. All metrics evaluated indicate that the primary assembly is of high quality and complete. The assembly is furthermore annotated to a high standard with methods clearly described and all data made publicly accessible. Are the datasets clearly presented in a usable and accessible format, and the assembly and annotation available in an appropriate subject-specific repository? Yes Are sufficient details of the sequencing and extraction, software used, and materials provided to allow replication by others? Yes Are the rationale for sequencing the genome and the species significance clearly described? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: plant genome assembly and comparative genomics I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. This is a fairly straightforward type of data to report, and everything appears to have been done according to standard practices. Veronica arvensis is an important species to have sequenced in this way. It might have been nice to have more evaluation of the genomic similarity to related species or some phylogenetic analyses, but I imagine these kinds of analyses will happen over time. Are the datasets clearly presented in a usable and accessible format, and the assembly and annotation available in an appropriate subject-specific repository? Yes Are sufficient details of the sequencing and extraction, software used, and materials provided to allow replication by others? Yes Are the rationale for sequencing the genome and the species significance clearly described? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Molecular phylogenetics, botany I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. This is the report of the genome of Veronica arvensis. The author has ample experience in reporting genomes and the manuscript is written in parallel to other genomes reported. Therefore, there is a certain routine in these papers. I only noticed that the results of the flow cytometry and DNA barcoding are not reported. The reference Harap (2025) is included twice in the references. Are the datasets clearly presented in a usable and accessible format, and the assembly and annotation available in an appropriate subject-specific repository? Yes Are sufficient details of the sequencing and extraction, software used, and materials provided to allow replication by others? Yes Are the rationale for sequencing the genome and the species significance clearly described? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: plant systematics I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. As this article is a Genome Note, Automated Benchmarking has been used to determine whether the reported assembly passes four defined checks established by the Earth BioGenome Project: the raw and assembled data are publicly available, the Earth BioGenome Project three-part metric is met, the k-mer completeness exceeds 90%, and the BUSCO score passes the stated threshold. For Veronica arvensis (daVerArve1), all four checks passed. Data available: pass. ENA study PRJEB78314, raw-read accessions ERR13420764, ERR13420765, ERR13420766, ERR13420767, and ERR13389751, and assembly accessions GCA_964211895.1 and GCA_964211885.1 are public. Earth BioGenome Project three-part metric: pass. Haplotype 1 is reported as 6.C.Q67, meeting the 6.C.Q40 reference standard. k-mer completeness: pass. The combined haplotype assemblies have 99.09% k-mer completeness, exceeding the Earth BioGenome Project target of 90%. BUSCO: pass. Haplotype 1, which is proposed as the reference assembly for this species, has 95.5% complete BUSCOs (90.3% single-copy and 5.2% duplicated). BUSCO software version: 5.5.0; lineage dataset: eudicots_odb10. It meets the plant-specific target of greater than 90% complete BUSCOs. This decision uses values reported in the Genome Note and public accession records. Reviewer Expertise: NA I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard.