Micromorphology of the Aristotle’s Lantern in the Sand Dollar, Scaphechinus mirabilis (Echinoidea: Echinolampadacea): Insights from Scanning Electron Microscopy and Three-Dimensional X-Ray Microscopy Authors: Eun Ha Kim, Jung Jun Park, Chang-Moon Lee, Hyeon Jin Kim, Jung Sick Lee Published: 2026 ABSTRACT Simple SummaryScaphechinus mirabilis is a sea urchin that inhabits soft substrates and possesses a feeding apparatus called Aristotle’s lantern. In this study, the micromorphology of Aristotle’s lantern in S. mirabilis was examined using light microscopy, scanning electron microscopy, and three-dimensional X-ray microscopy. Aristotle’s lantern consisted of skeletal components, including the pyramids, teeth, epiphyses, and rotulae, as well as ligaments and muscles. The teeth were arranged parallel to the body axis along the tooth grooves of the pyramids and were connected to the pyramids by tooth ligaments and muscles. These findings provide morphological information on Aristotle’s lantern in S. mirabilis and contribute to a better understanding of the structural diversity of the feeding apparatus in echinoids. 1. Introduction The class Echinoidea comprises 1167 extant species worldwide [1] and is divided into two subclasses, Regularia and Irregularia, based on morphology [2]. Regularia includes sea urchins with a globular test, such as Anthocidaris crassispina and Hemicentrotus pulcherrimus, and currently comprises 11 orders. Irregularia comprises five orders, including the heart-shaped Spatangoida and the flattened, coin-shaped Echinolampadacea [3]. Echinolampadacea are commonly known as sand dollars because their flattened, coin-like tests become conspicuous following the loss of the surface spines. They are distributed in Australia, Russia, Japan, and Taiwan [4,5,6], as well as along the entire coast of South Korea [7]. Scaphechinus mirabilis primarily inhabits sandy or muddy-sand substrates at depths of 3–6 m, occurring either on the sediment surface or burrowed 1–4 cm beneath it [8,9]. Regular echinoids are epifaunal species that primarily inhabit hard substrates in rocky habitats. They protrude Aristotle’s lantern beyond the mouth to graze on macroalgae, sessile or slow-moving benthic invertebrates, and carrion by scraping or fragmenting food items [10]. In contrast, irregular echinoids are infaunal species that inhabit sandy or muddy-sand substrates, where they burrow beneath the sediment surface and feed as deposit feeders on foraminiferans, benthic diatoms, and organic matter [11]. These differences in habitat and feeding strategy are reflected in the morphology and feeding mechanics of Aristotle’s lantern, resulting in distinct morphological and functional adaptations between regular and irregular echinoids [12]. Aristotle’s lantern is a complex musculoskeletal feeding apparatus organized according to the pentameral symmetry of echinoids [13]. In regular echinoids, Aristotle’s lantern typically consists of 40 skeletal ossicles, including five teeth, ten demipyramids, ten epiphyses, five rotulae, and ten compasses. These skeletal elements are interconnected by ligaments and operated by muscles, including the protractor, retractor, and interpyramidal muscles, enabling various movements of the lantern [14]. In contrast, among irregular echinoids, the Aristotle’s lantern of clypeasteroids differs structurally from that of regular echinoids. The clypeasteroid lantern is flattened and non-protrusible, with the teeth oriented horizontally relative to the substrate and functioning in crushing [15,16]. Aristotle’s lantern has been studied from various perspectives. Studies on the Aristotle’s lantern in echinoids have investigated its relative size and functional significance [17], tooth regeneration in Strongylocentrotus purpuratus [18], the evolution of the muscular design of the Aristotle’s lantern [14], the presence or absence of the Aristotle’s lantern in Spatangoids [19], and the chemical composition of the test, spines, and Aristotle’s lantern [20]. However, most of these studies have been limited to regular echinoids. Previous studies on the Aristotle’s lantern in irregular echinoids have investigated its function [21], taxonomic differences in lantern morphology [12], the muscles responsible for tooth movement in Dendraster excentricus, Eucidaris tribuloides, S. purpuratus, and Echinarachnius parma [15,22], and the feeding behavior and digestion of Astriclypeus manni [11]. However, studies on the morphology and structure of the Aristotle’s lantern in S. mirabilis remain limited. Therefore, this study aimed to characterize the morphology and microstructure of the Aristotle’s lantern in S. mirabilis using light microscopy, scanning electron microscopy, and X-ray microscopy. The results provide the first comprehensive anatomical description of the lantern in this species and establish a morphological framework for comparisons with other irregular echinoids. 2. Materials and Methods 2.1. Specimens A total of 50 individuals of Scaphechinus mirabilis were collected using a dredge net at depths of 2–15 m along the northern east coast of the Republic of Korea (38°24′–38°25′ N, 128°28′–128°29′ E) between May and December 2024 (Figure 1). To avoid ontogenetic variation in the morphology of Aristotle’s lantern, only adult individuals (test length ≥ 30 mm) were examined. The minimum adult size was adopted from [23]. 2.2. Measurements Morphometric measurements were performed on 50 individuals (n = 50). Test length (TL) and test height (TH) were measured to the nearest 0.01 mm using a digital vernier caliper, and total weight (TW) was measured to the nearest 0.01 g using an electronic balance (Figure 2). The measured values are presented as mean ± standard deviation (SD) and range (minimum–maximum) in Table 1. 2.3. Preparation of Ground Specimens Ground specimens (n = 3) were prepared with modifications to the method described in [24]. The Aristotle’s lantern was dissected and immersed in 30% hydrogen peroxide for 24 h to remove the surrounding organic tissues. The cleaned pyramids and teeth were then ground using #320 sandpaper (Noroo Paint & Coatings Co., Anyang, Republic of Korea), rinsed with distilled water, and examined under a stereomicroscope (SZX12, Olympus, Tokyo, Japan). 2.4. Light Microscopy For light microscopy, specimens (n = 10) were prepared according to conventional histological procedures, with modifications [25]. A portion of the test was removed, and the specimens were fixed in 10% neutral buffered formalin for 24 h. The fixed specimens were rinsed in running water for 48 h and decalcified in 5% EDTA solution for 48 h. The decalcified specimens were dehydrated through a graded ethanol series, cleared in xylene, and embedded in paraplast (Leica, Wetzlar, Germany). Serial sections approximately 5 μm thick were prepared using a microtome (RM2235, Leica, Wetzlar, Germany). The sections were stained with Mayer’s hematoxylin and 0.5% eosin (H-E) stain, Masson’s trichrome stain, and alcian blue–periodic acid and Schiff’s solution (AB-PAS, pH 2.5) reaction. 2.5. Scanning Electron Microscopy For scanning electron microscopy, specimens (n = 5) were prepared with modifications to the method described in [26]. The specimens were fixed for 4 h in 2.5% glutaraldehyde in 0.1 M phosphate buffer (pH 7.4), then rinsed three times for 20 min each in the same buffer. To remove organic material from the surface, the specimens were treated with 30% hydrogen peroxide for 24 h, dehydrated through a graded ethanol series from 50% to 100%, and dried. The specimens were subsequently platinum-coated at 10 mA for 4 min using a sputter coater (SC7620, Quorum Technologies, Laughton, UK) and examined with a field-emission scanning electron microscope (FE-SEM; Sigma 500, ZEISS, Oberkochen, Germany) at an accelerating voltage of 1 kV and scanning electron microscope (SEM; Axia ChemiSEM, Thermo Fisher Scientific, Waltham, WA, USA) at an accelerating voltage of 1~2 kV. 2.6. X-Ray Microscopy For X-ray microscopy (XRM), a specimen (n = 1) was prepared with modifications to the method described by [27]. The Aristotle’s lantern was dissected from specimens fixed in 10% neutral buffered formalin, rinsed in running water for 48 h, and dehydrated through a graded ethanol series from 50% to 100%. The dehydrated specimens were embedded in Epon 812 and polymerized at 60 °C for 24 h. The embedded blocks were trimmed to approximately 15 × 15 × 11 mm and examined using an X-ray microscope (Xradia 620 Versa, ZEISS, Oberkochen, Germany) operated at 60 kV and 6.5 W. XRM imaging was performed with a voxel size of 5 μm using 3001 projections. Image acquisition and reconstruction were performed using the Scout-and-Scan Control System software 16.0 (ZEISS, Oberkochen, Germany). 2.7. Image Analysis The major axis lengths of the mouth, anus, and ostium, the lengths of the pyramid and tooth, and the major axis lengths of the pores on the surfaces of the demi-pyramid, epiphysis, and rotula were measured using an image analyzer (i-Solution, IMT i-Solution Inc., Burnaby, Canada) (Figure 3). 2.8. Draw a Diagrammatic Representation Diagrammatic representations were prepared using Procreate® version 5.3.12 (Savage Interactive Pty Ltd., Hobart, Australia). 3. Results 3.1. External Morphology Scaphechinus mirabilis had a bilaterally symmetrical, rounded, and flattened disc-shaped test. The ventral surface was flat, whereas the dorsal surface formed a low dome (Figure 4A and Figure 5I). The external surface was covered with purple spines 1.01 (±0.18) mm in length (Figure 4C,D). Five petaloids were radially arranged on the dorsal surface (Figure 4A,B), whereas the food grooves and mouth were located on the ventral surface (Figure 5A). The food grooves exhibited a root-like branching pattern. Multiple grooves originating from the test margin gradually converged into five main food grooves that extended to the mouth (Figure 5A,B). The mouth was circular, 2.92 (±0.28) mm in diameter, and located at the center of the ventral surface (Figure 5B,C). It was covered by the peristomal membrane (Figure 5D,E). The peristomal membrane consisted of an outer cuticular layer and an inner connective tissue layer. The cuticular layer stained red with H-E stain and Masson’s trichrome stain and blue with AB-PAS (pH 2.5) reaction. The connective tissue layer consisted of dense connective tissue containing collagen fibers. It stained red with H-E stain and blue with Masson’s trichrome stain and AB-PAS (pH 2.5) reaction (Figure 5F–H). The anus was circular, 1.35 (±0.07) mm in diameter, and located laterally along the horizontal body axis (Figure 5I,J). 3.2. Anatomical Structure After removal of the dorsal test, the gonads, diverticular pouches, and Aristotle’s lantern were observed. The gonads were rounded, pentagonal, and brown to dark grayish-green, partially covering the Aristotle’s lantern and the digestive tract (Figure 6A). The diverticular pouches were located between the septa and contained Gregory’s diverticula (Figure 6A). The digestive system consisted of the pharynx, esophagus, stomach, siphon, intestine, rectum, and Gregory’s diverticulum (Figure 6B,C). The pharynx was located at the center of Aristotle’s lantern and extended from the mouth to the esophagus. The esophagus was a straight tube extending from the point where the pharynx exited Aristotle’s lantern to the stomach. At its distal end, it bifurcated into the stomach and siphon. The stomach was an expanded outer tube, whereas the siphon was a slender inner tube. Both the stomach and siphon merged into the intestine. The anterior intestine formed a loop, whereas the posterior rectum extended as a straight tube to the anus. Gregory’s diverticulum consisted of 15 pouches branching from the intestine (Figure 6B,C). 3.3. Aristotle’s Lantern Aristotle’s lantern was attached to the test by five apophyses (Figure 7A–D). The apophyses were trapezoidal projections arising from the inner surface of the test and possessed grooves that supported Aristotle’s lantern (Figure 7E,F). Aristotle’s lantern was a milky-white, star-shaped structure measuring 9.96 (±0.59) mm in length and consisted of five pyramids connected by joints (Figure 8). 3.3.1. Pyramid The pyramid was butterfly-shaped and consisted of two demi-pyramids (Figure 9A,B). The ventral surface of the pyramid bore a protruding bump (Figure 9A), whereas the dorsal surface bore the tooth and epiphysis (Figure 9B). Each demi-pyramid was triangular and exhibited a porous structure with 5–7 depressed oval ostia surrounding the raised area. The major axis length of the ostium differed between regions, measuring 0.40 (±0.08) mm on the dorsal side and 0.65 (±0.35) mm on the ventral side (Figure 9A–C). Each ostium was an independent structure with no interconnections between adjacent ostia (Figure 9C). 3.3.2. Joint The joint was located between adjacent pyramids and consisted of the interpyramidal ligament and rotula (Figure 10A,B). The interpyramidal ligament differed in length between regions, measuring 0.09 (±0.02) mm on the dorsal side and 0.64 (±0.18) mm on the ventral side (Figure 10A–D). It consisted of dense connective tissue composed of collagen fibers and fibroblasts and stained blue with Masson’s trichrome stain. Fibroblasts were scattered among the collagen fibers, and their nuclei occupied most of the cell, appearing purple with Masson’s trichrome stain (Figure 10C–E). The rotula was located dorsal to the interpyramidal ligament (Figure 10A). It was spoon-shaped with a porous structure and measured 1.37 (±0.06) mm in height. The cylindrical stalk measured 0.13 (±0.02) × 0.82 (±0.03) mm and was positioned between the paired epiphyses, whereas the hexagonal base measured 0.32 (±0.01) × 0.62 (±0.02) mm and was located on the outer dorsal side of the paired epiphyses (Figure 10F,G). Serial X-ray microscopy sections showed that the cross-sectional area of the rotula gradually increased from the ventral to the dorsal side (Figure 10H,I). The rotula was connected to the adjacent epiphyses by connective tissue located above the interpyramidal ligament. The connective tissue consisted of collagen fibers (Figure 10J). 3.3.3. Epiphysis The epiphysis was located between the demi-pyramid and the rotula (Figure 11A–C). The epiphysis was cuboidal, 0.91 (±0.08) mm in length, and had an inclined surface facing the rotula (Figure 11A). The epiphysis exhibited a porous structure (Figure 11B,C), and the surface pores measured 0.01 mm in diameter. In X-ray microscopy, the epiphysis exhibited relatively higher X-ray signal intensity than the adjacent demi-pyramid (Figure 11D). 3.3.4. Tooth The tooth attached to Aristotle’s lantern was divided into an embedded part and a projection part (Figure 12A–C). The embedded part was located within the tooth slide of the pyramid and was connected to the dental ligament and dental promoter muscle (Figure 12A,D). It accounted for approximately 15% of the total tooth length. The projection part accounted for approximately 85% of the total tooth length and was divided into a basal projection part, which was located within the tooth slide and covered by the peridental membrane, and an apical projection part, which projected beyond the tooth slide (Figure 12A–C). The embedded part was surrounded by a well-developed muscular layer composed of smooth muscle and connective tissue. Around the tooth, the inner layer consisted of circular smooth muscle, whereas the outer layer consisted of longitudinal smooth muscle (Figure 13B–E). The tooth slide was a V-shaped groove, 2.14 (±0.03) mm in length and 0.40 (±0.04) mm in width, located at the center of the dorsal side of the pyramid. The tooth was connected to the tooth slide by the dental ligament (Figure 12D and Figure 13D). The peridental membrane was a thin connective tissue layer, 12.92 (±4.50) μm in thickness, connecting to the tooth slide (Figure 13D). The dental ligament was located on the surface of the tooth slide. It was straight along the embedded part (Figure 13C,D) but formed a V-shaped configuration near the projection part, following the contour of the tooth surface (Figure 13F) The tooth isolated from Aristotle’s lantern was milky white and elongated trapezoidal, measuring 3.35 (±0.35) mm in length, 0.98 (±0.05) mm in width, and 0.38 (±0.01) mm in thickness (Figure 14A–C). The apex of the apical projection part was rounded on the dorsal side (Figure 14D) and pointed on the ventral side (Figure 14E). In cross section, the tooth exhibited 15–20 concentric lamellae, each approximately 0.76 (±0.18) μm thick. The ventral surface of the apical projection part exhibited wean (Figure 14F). In X-ray microscopy, multiple calyx-shaped plumula extended from the basal projection part to the embedded part and became progressively larger toward the embedded part (Figure 14G–J). 3.3.5. Bump The bump was located at the lower part of the junction between the two demi-pyramids on the ventral side. The junction between the demi-pyramids was covered by the symphysis (Figure 15A,B). The bump was a semi-cylindrical column with a fan-shaped base, measuring approximately 0.5 mm in height (Figure 15B). In the cross section of the ground specimen, a pale line separating the bump from the adjacent demi-pyramid was observed (Figure 15C). The bump was readily distinguished from the adjacent demi-pyramid in the X-ray images, showing a more homogeneous internal structure (Figure 15E). The symphysis was stained light pink with 0.5% eosin (Figure 15B). Histologically, the tissue consisted of chondrocytes and a collagen-rich extracellular matrix. In Masson’s trichrome-stained sections, the chondrocytes were stained red, whereas the collagen-rich extracellular matrix was stained blue (Figure 15F,G). 4. Discussion Echinoids differ among taxonomic groups in habitat and feeding methods. As a result, their external morphology, digestive tract morphology and organization, and the morphology of Aristotle’s lantern, the feeding apparatus, differ accordingly [28]. Irregular echinoids possess short aboral spines and food grooves that transport food particles toward the mouth through the action of oral spines and tube feet [29,30]. Similar feeding structures have been described in other clypeasteroids, including Mellita quinqujesperforata [29], Dendraster excentricus [31], and Astriclypeus manni [11]. Likewise, Scaphechinus mirabilis possesses short aboral spines (≤5 mm) and five petaloid food grooves extending to the mouth. These morphological features are consistent with the transport of food particles toward the mouth described for other clypeasteroids. The mouth of echinoids is surrounded by the peristomal membrane. The peristomal membrane is a disc-shaped membranous structure connecting the test and Aristotle’s lantern [32]. It functions as a diaphragm-like viscoelastic ligament that actively or passively participates in all movements of the lantern [33]. In regular echinoids, the peristomal membrane consists of a dermis containing mutable collagenous tissue, a transitional epithelium, and a basiepithelial nerve plexus [33]. In contrast, Cidaroids possess skeletal plates extending into the peristomal membrane and lack mutable collagenous tissue, resulting in reduced dynamic function [34]. In addition, the Aristotle’s lantern of irregular echinoids in the order Clypeasteroida is flattened, non-protrusible, and adapted for crushing sediment during feeding [35]. The peristomal membrane of S. mirabilis was disc-shaped and attached to the mouth, consisting of an outer cuticle layer and an inner connective tissue layer. This histological organization differed from that reported in regular echinoids and may be associated with supporting the tissues surrounding the mouth and maintaining the connection with Aristotle’s lantern. The Aristotle’s lantern is the feeding apparatus of echinoids, and its morphology and degree of development vary among species. Regular echinoids possess an Aristotle’s lantern with a wide range of tooth movement for grazing on food such as algae, and larger lanterns have been reported to increase feeding efficiency [17]. The morphology of Aristotle’s lantern in regular echinoids varies among taxonomic groups. The major anatomical characteristics of Aristotle’s lantern in regular echinoids, irregular echinoids, and S. mirabilis are summarized in Table 2. In echinoids belonging to the orders Cidaroida, Diadematacea, Arbacioida, and Camarodonta, the Aristotle’s lantern is lantern-shaped [36]. In irregular echinoids, the morphology of Aristotle’s lantern has been described for Cassiduloida, Oligopygoida, Clypeasterina, Laganina, and Scutellina [12]. In Cassiduloida, Aristotle’s lantern is present only during the juvenile stage and has an upright morphology similar to that of regular echinoids. Oligopygoida and Clypeasterina possess a prominent supra-alveolar process located at the center of the lantern. In contrast, in Laganina and Scutellina, the supra-alveolar process is located at the lateral margin of the lantern. In Laganina, the rotula is greatly reduced or absent in some taxa, whereas Scutellina possesses a long and narrow rotula located between the adjacent epiphyses [12]. In the present study, S. mirabilis was similar to Scutellina in having a cylindrical stalk of the rotula located between the epiphyses. In contrast, the hexagonal base of the rotula was located on the outer upper margin of the epiphyses rather than between them, differing from that of Scutellina. In regular echinoids, Aristotle’s lantern is broadly divided into the skeletal system and the muscular and ligamentous systems. The skeletal system and the muscular and ligamentous systems interact to produce various movements, including protraction, retraction, and lateral tilting of the overall apparatus, and opening and closing of the five jaws [37]. The skeletal system consists of the pyramids, teeth, epiphyses, rotula, and compass [38], whereas the muscular and ligamentous systems consist of muscles and ligaments [37]. In contrast, the Aristotle’s lantern of S. mirabilis lacked a compass in the skeletal system, whereas the muscular and ligamentous systems consisted of the interpyramidal ligament, dental ligament, and dental promoter muscle, differing from those of regular echinoids. The compass is located above the rotula and undergoes vertical movements independent of the lantern. It has been suggested to be involved in the movement and circulation of coelomic fluid within the peripharyngeal coelom surrounding the lantern [37]. In contrast, S. mirabilis lacks a compass, and further studies are needed to clarify the mechanism of coelomic fluid circulation. In S. mirabilis, all skeletal components except the teeth exhibited a porous structure, consistent with the Aristotle’s lantern of the regular echinoids Stylocidaris affinis [37] and Diadema setosum [20]. In both regular and irregular echinoids, each pyramid consists of two demi-pyramids [16]. In regular echinoids, the demi-pyramids are flattened structures with depressions for muscle attachment and lack ostium on their surfaces [37]. In contrast, in Fellaster zelandiae of Echinolampadacea, ostium is located adjacent to the joint and is interconnected by a stereom structure [39]. In the present study, the pyramid of S. mirabilis consisted of two demi-pyramids, each with a raised area. Both the dorsal and ventral sides of the demi-pyramids possessed 5–7 oval ostia adjacent to the joint. However, unlike those of F. zelandiae, each ostium was an independent structure lacking interconnections [39]. In regular echinoids, the joints of Aristotle’s lantern are divided into the perignathic girdle–lantern joint and the rotular joint. The perignathic girdle–lantern joint connects the lantern to the test through muscles and ligaments and is responsible for protraction, retraction, and lateral tilting of the lantern, whereas the rotular joint connects adjacent pyramids and is responsible for opening and closing movements of the lantern [37]. The rotular joint consists of the rotula and ligaments and is classified into socket joints and hinge joints according to the position of the rotula. In the socket joint, the rotula is located medial to the epiphysis and is mainly found in Cidaroids, whereas in the hinge joint, the rotula is positioned at the same level as the epiphysis and is characteristic of echinoids [16]. In the present study, unlike in regular echinoids, only the rotular joint was present in S. mirabilis, whereas the perignathic girdle–lantern joint was absent. In addition, the rotular joint consisted of the rotula and the interpyramidal ligament, which was composed of connective tissue, and was classified as a hinge joint because the rotula was positioned at the same level as the epiphysis. Unlike that of regular echinoids, the Aristotle’s lantern of Echinolampadacea does not protrude beyond the mouth, and the teeth move horizontally against the sediment to crush it [13,21,29]. Based on this morphological arrangement, the teeth of S. mirabilis may move anteroposteriorly along the body axis. In regular echinoids, the epiphysis is located at the upper part of the pyramid, where it provides an articulation site for the rotula and forms the joint. In Eucidaris tribuloides, the epiphysis has been reported to measure 2.5–3.0 mm in length [16]. In the present study, the epiphysis of S. mirabilis was smaller than that reported for E. tribuloides. In addition, the pores on the surface of the epiphysis were smaller than those on the surface of the demi-pyramid, and X-ray microscopy revealed higher signal intensity in the epiphysis than in the adjacent demi-pyramid. The higher X-ray signal intensity and smaller surface pores in the epiphysis of S. mirabilis compared with the adjacent demi-pyramid suggest a denser stereom microstructure, consistent with the occurrence of denser stereom in echinoid skeletal regions subjected to greater mechanical stress [13,40]. Therefore, the relatively dense stereom of the epiphysis may be associated with the mechanical demands of the epiphysis–rotula articulation, although further biomechanical studies are required to confirm this functional relationship [13,41]. In regular echinoids, the teeth of Aristotle’s lantern are the primary structures responsible for scraping food and are U- or T-shaped columns. T-shaped teeth possess a well-developed keel that reinforces the tooth structure and are arranged perpendicular to the body axis [36,37,42]. In contrast, in Echinolampadacea, including M. tenuis, the teeth are arranged parallel to the body axis and are therefore unsuitable for scraping food. Instead, they function by crushing ingested sediment particles [21,29,43]. In the present study, the teeth of S. mirabilis were elongated trapezoidal structures, arranged parallel to the body axis on the tooth slide of the pyramid and anchored by the dental ligament. This arrangement was consistent with that reported for Echinolampadacea. In regular echinoids, the teeth are anchored to the center of the pyramid by the dental ligament and move together with the pyramid through the action of the protractor and retractor muscles, which pull the pyramid upward and downward, respectively [44]. In Echinarachnius parma of Echinolampadacea, the teeth are located on the dorsal side of the pyramid, and a well-developed dental promoter muscle located at the posteroventral part of the tooth is responsible for tooth movement [15]. In the present study, muscles were well developed on both sides and at the base of the embedded part of the tooth in S. mirabilis. Similar to E. parma [15], the lateral muscles in S. mirabilis may be involved in the protraction and retraction of the tooth, whereas the circularly arranged muscles at the base may contribute to tooth stabilization. In the regular echinoid Strongylocentrotus purpuratus [45] and the Echinolampadacea E. parma [15], the teeth possess a worn apical surface and a plumula at the basal region. The worn surface is formed as the teeth crush sediment particles, whereas the plumula indicates continuous tooth formation and growth from the basal region [15,18]. In the present study, S. mirabilis also exhibited a similar worn apical surface and a multilayered, calyx-shaped plumula. These findings suggest that the plumula is associated with continuous tooth formation and growth from the basal region and may also provide a structural basis for the firm attachment of the dental ligament and dental promoter muscle. animals-16-02733-t002_Table 2Table 2Comparison of the major anatomical characteristics of Aristotle’s lantern in regular echinoids, irregular echinoids, and Scaphechinus mirabilis.FeatureRegular EchinoidsIrregular EchinoidsPresent StudyLantern ShapeLantern-shaped [15]Flattened [15]Flattened ProjectionProtrusible [15]Non-protrusible [46]Non-protrusibleCompassPresent [37]Absent [12]AbsentRotula PositionBetween epiphyses [46]Between epiphyses [12]Between epiphyses ShapeGenerally, not reduced [46]Very small plate-like [12,46]Cylindrical stalkPyramidComposed of two demi-pyramidsComposed of two demi-pyramidsComposed of two demi-pyramids Demi-pyramidFlattened; Ostia absent [40]Interconnected ostia adjacent to the joint [39]5–7 independent ostia adjacent to the jointJoint Perignathic girdle–lantern jointPresent [37]-Absent Rotular jointSocket or hinge type [16]Flat planar surface [46]Hinge typeEpiphysisUpper part of pyramid [16]On the demi-pyramids; Flanking the rotula [12]Upper part of pyramid; Flanking the rotulaTooth ArrangementPerpendicular to body axis [36,37,42]Parallel to body axis [21,29,43]Parallel to body axis Position Located on the tooth slide [21,29,43]Located on the tooth slide ShapeU- or T-shape; Keeled [36,37,42]Taxon-dependentElongated trapezoidal; Keel absent Plumula structurePresent [45]Present [15]Present; Multilayered and calyx-shaped Tooth movementMoves with the pyramid [44]Independent of pyramid movement [15]May move independently of the pyramidDemi-pyramid junction (Bump)Simple central suture [16]-Bump between two demi-pyramids animals-16-02733-t002_Table 2Table 2Comparison of the major anatomical characteristics of Aristotle’s lantern in regular echinoids, irregular echinoids, and Scaphechinus mirabilis.FeatureRegular EchinoidsIrregular EchinoidsPresent StudyLantern ShapeLantern-shaped [15]Flattened [15]Flattened ProjectionProtrusible [15]Non-protrusible [46]Non-protrusibleCompassPresent [37]Absent [12]AbsentRotula PositionBetween epiphyses [46]Between epiphyses [12]Between epiphyses ShapeGenerally, not reduced [46]Very small plate-like [12,46]Cylindrical stalkPyramidComposed of two demi-pyramidsComposed of two demi-pyramidsComposed of two demi-pyramids Demi-pyramidFlattened; Ostia absent [40]Interconnected ostia adjacent to the joint [39]5–7 independent ostia adjacent to the jointJoint Perignathic girdle–lantern jointPresent [37]-Absent Rotular jointSocket or hinge type [16]Flat planar surface [46]Hinge typeEpiphysisUpper part of pyramid [16]On the demi-pyramids; Flanking the rotula [12]Upper part of pyramid; Flanking the rotulaTooth ArrangementPerpendicular to body axis [36,37,42]Parallel to body axis [21,29,43]Parallel to body axis Position Located on the tooth slide [21,29,43]Located on the tooth slide ShapeU- or T-shape; Keeled [36,37,42]Taxon-dependentElongated trapezoidal; Keel absent Plumula structurePresent [45]Present [15]Present; Multilayered and calyx-shaped Tooth movementMoves with the pyramid [44]Independent of pyramid movement [15]May move independently of the pyramidDemi-pyramid junction (Bump)Simple central suture [16]-Bump between two demi-pyramids Comparison of the major anatomical characteristics of Aristotle’s lantern in regular echinoids, irregular echinoids, and Scaphechinus mirabilis. In regular echinoids, the two demi-pyramids meet at a central suture and are not connected by any other skeletal structures [16]. In S. mirabilis possessed a distinct bump at the junction between the two demi-pyramids, which was connected to the demi-pyramids by the symphysis. Based on its position, this structure may contribute to reinforcement of the demi-pyramid junction. Therefore, the Aristotle’s lantern of S. mirabilis exhibits morphological and microstructural specializations. These features provide new anatomical information on the lantern of this species and offer a morphological basis for future studies of feeding function and evolutionary adaptations in irregular echinoids. 5. Conclusions In this study, the external morphology of Scaphechinus mirabilis and the micromorphology of Aristotle’s lantern were examined using light microscopy, scanning electron microscopy, and X-ray microscopy. Aristotle’s lantern consisted of the pyramids, teeth, epiphyses, rotula, ligaments, and muscles, whereas the compass and perignathic-lantern joint were absent. The pyramids were interconnected by connective tissue, and the teeth were arranged parallel to the body axis along the tooth grooves of the pyramids. X-ray microscopy further revealed the three-dimensional arrangement of these components within Aristotle’s lantern. These findings provide detailed morphological information on the structural organization of Aristotle’s lantern in S. mirabilis and contribute to understanding the micromorphological characteristics of the feeding apparatus in sand dollars.