The genome sequence of Vicia sativa L., 1753 (Fabales: Fabaceae) Authors: Maarten J. M. Christenhusz, Royal Botanic Gardens Kew Genome Acquisition Lab, Plant Genome Sizing Collective, Darwin Tree of Life Barcoding collective, Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team, Wellcome Sanger Institute Scientific Operations: Sequencing Operations, Wellcome Sanger Institute Tree of Life Core Informatics team, Tree of Life Core Informatics collective, Darwin Tree of Life Consortium, Fabrício Almeida-Silva, Nguyen Nhat Nam Published: 2026 ABSTRACT We present a genome assembly of Vicia sativa (Narrowleaf Vetch; Streptophyta; Magnoliopsida; Fabales; Fabaceae). The assembly consists of two haplotypes with total lengths of 1 748.92 megabases and 1 751.13 megabases. Most of haplotype 1 (98.95%) is scaffolded into 6 chromosomal pseudomolecules. Haplotype 2 was assembled to scaffold level. The mitochondrial sequence has a length of 405.76 kilobases and the plastid genome assembly has a length of 124.62 kilobases. Gene annotation of this assembly on Ensembl identified 11 105 protein-coding genes. This assembly was generated as part of the Darwin Tree of Life project, which produces reference genomes for eukaryotic species found in Britain and Ireland. Species taxonomy Eukaryota; Viridiplantae; Streptophyta; Magnoliopsida; Fabales; Fabaceae; Vicia; Vicia sativa L., 1753 (NCBI:txid3908). Background Vicia sativa L. (Common Vetch) is a native annual herb found in grassland and on waysides, especially on dry or sandy sites. It has also been grown as a fodder crop, and has widely escaped cultivation and become naturalised in ruderal habitats. It is mainly lowland, but has been recorded up to 470 m in the Clun Forest, Shropshire, and above 500 m on forestry tracks at Carter Fell, Roxburghshire ( Pearman, 2020). Three subspecies occur in Britain and Ireland: V. sativa subsp. nigra, subsp. segetalis and subsp. sativa. According to Plant Atlas 2020, the overall 10 km square distribution has increased since the 1962 Atlas, probably because of sowing and spread of introduced plants, as well as more intensive recording in some areas. However, the mapped distribution may overestimate the native range, as subsp. nigra has been over-recorded as native at inland sites. The species is described as a European Southern-temperate element and is widely naturalised outside its native range ( Pearman, 2020). As part of the Darwin Tree of Life Project – which aims to generate high-quality reference genomes for all named eukaryotic species in Britain and Ireland to support research, conservation, and the sustainable use of biodiversity – we present a chromosomally complete genome sequence for Vicia sativa, Narrowleaf Vetch. This genome was assembled using the Tree of Life pipeline from a specimen collected in Kingston, Surrey, United Kingdom ( Figure 1). Photograph of the Vicia sativa (drVicSati1) specimen from which samples were taken for genome sequencing. Other assemblies for this species are also available, including chromosome-level assemblies (GCA_021764765.1 and GCA_018327625.1) submitted by the Kazusa DNA Research Institute and the University of Adelaide (NCBI datasets, O’Leary et al., 2024). Methods Sample acquisition, flow cytometry and DNA barcoding A specimen of Vicia sativa (specimen ID KDTOL10205, ToLID drVicSati1; Figure 1) was used for genome sequencing. It was collected from Kingston, Surrey, United Kingdom (latitude 51.4293, longitude −0.3072) on 2021-05-17. The specimen was collected and identified by Maarten J. M. Christenhusz. The drVicSati1 specimen was also used for Hi-C and RNA sequencing. The genome size was estimated by flow cytometry following the ‘one-step’ method outlined in Pellicer et al. (2021) and using propidium iodide as the fluorochrome. CyStain PI OxProtect Staining Buffer (Sysmex UK Ltd) was used for isolation of nuclei ( Loureiro et al., 2007), and the internal calibration standard was Pisum sativum L. ‘Ctirad’ with an assumed 1C-value of 4 445 Mb ( Doležel et al., 1998). The initial identification was verified by an additional DNA barcoding process according to the framework developed by Twyford et al. (2024). Part of the plant specimen was preserved in silica gel desiccant ( Chase & Hills, 1991). DNA extracted from the dried plant was amplified by PCR for standard barcode markers, with the amplicons sequenced and compared to public sequence databases including GenBank and the Barcode of Life Database (BOLD) ( Ratnasingham & Hebert, 2007). Following whole genome sequence generation, the relevant DNA barcode region was also used alongside the initial barcoding data for sample tracking at the WSI ( Twyford et al., 2024). The standard operating procedures for Darwin Tree of Life barcoding are available on protocols.io. Nucleic acid extraction Protocols for high molecular weight (HMW) DNA extraction developed at the Wellcome Sanger Institute (WSI) Tree of Life Core Laboratory are available on protocols.io ( Howard et al., 2025). The drVicSati1 sample was weighed and triaged to determine the appropriate extraction protocol. Tissue from the leaf was homogenised by cryogenic disruption using the Covaris cryoPREP® Automated Dry Pulverizer. HMW DNA was extracted using the Plant Organic Extraction protocol. DNA was sheared into an average fragment size of 12–20 kb following the Megaruptor®3 for LI PacBio protocol. Sheared DNA was purified by automated SPRI (solid-phase reversible immobilisation), using AMPure PB beads (Pacific Biosciences) and the Thermo Fisher KingFisher™ Apex to eliminate shorter fragments and concentrate the DNA. The concentration of the sheared and purified DNA was assessed using a Nanodrop spectrophotometer and Qubit Fluorometer using the Qubit dsDNA High Sensitivity Assay kit. Fragment size distribution was evaluated by running the sample on the FemtoPulse system. For this sample, the final post-shearing DNA had a Qubit concentration of 74.2 ng/μL and a yield of 10 017.00 ng. RNA was extracted from drVicSati1 leaf tissue in the Tree of Life Laboratory at the WSI using the RNA Extraction: Automated MagMax™ mirVana protocol. The RNA concentration was assessed using a Nanodrop spectrophotometer and a Qubit Fluorometer using the Qubit RNA Broad-Range Assay kit. Analysis of the integrity of the RNA was done using the Agilent RNA 6000 Pico Kit and Eukaryotic Total RNA assay. PacBio HiFi library preparation and sequencing Library preparation and sequencing were performed at the WSI Scientific Operations core. Libraries were prepared using the SMRTbell Prep Kit 3.0 (Pacific Biosciences) according to the manufacturer’s instructions. The kit includes reagents for end repair/A-tailing, adapter ligation, post-ligation SMRTbell bead clean-up, and nuclease treatment. Size selection and clean-up were performed using diluted AMPure PB beads (Pacific Biosciences). DNA concentration was quantified using a Qubit Fluorometer v4.0 (ThermoFisher Scientific) and the Qubit 1X dsDNA HS assay kit. Final library fragment size was assessed with the Agilent Femto Pulse Automated Pulsed Field CE Instrument (Agilent Technologies) using the gDNA 55 kb BAC analysis kit. The sample was sequenced on a Revio instrument (Pacific Biosciences). The prepared library was normalised to 2 nM, and 15 μL was used for making complexes. Primers were annealed and polymerases bound to generate circularised complexes, following the manufacturer’s instructions. Complexes were purified using 1.2X SMRTbell beads, then diluted to the Revio loading concentration (200–300 pM) and spiked with a Revio sequencing internal control. The sample was sequenced on a Revio 25 M SMRT cell. The SMRT Link software (Pacific Biosciences), a web-based workflow manager, was used to configure and monitor the run and to carry out primary and secondary data analysis. Hi-C Sample preparation and crosslinking Hi-C data were generated from the leaf tissue of drVicSati1 using the Arima-HiC v2 kit (Arima Genomics). Tissue was finely ground using the Covaris cryoPREP Dry Pulverizer (Covaris), and then subjected to nuclei isolation. Nuclei were isolated using a modified protocol based on the Qiagen QProteome Cell Compartment Kit (Qiagen), in which only the Lysis and CE2 buffers were used, with QIAshredder spin columns. After isolation, nuclei were fixed using formaldehyde to a final concentration of 2% to crosslink the DNA. The crosslinked DNA was then digested and biotinylated according to the manufacturer’s instructions. A clean-up step was performed with SPRIselect beads before library preparation. DNA concentration was quantified using the Qubit Fluorometer v4.0 (Thermo Fisher Scientific) and the Qubit HS Assay Kit, following the manufacturer’s instructions. Hi-C library preparation and sequencing Biotinylated DNA constructs were fragmented using a Covaris E220 sonicator and size selected to 400–600 bp using SPRISelect beads. DNA was enriched with Arima-HiC v2 kit Enrichment beads. End repair, A-tailing, and adapter ligation were carried out with the NEBNext Ultra II DNA Library Prep Kit (New England Biolabs), following a modified protocol where library preparation occurs while DNA remains bound to the Enrichment beads. Library amplification was performed using KAPA HiFi HotStart mix and a custom Unique Dual Index (UDI) barcode set (Integrated DNA Technologies). Depending on sample concentration and biotinylation percentage determined at the crosslinking stage, libraries were amplified with 10–16 PCR cycles. Post-PCR clean-up was performed with SPRISelect beads. Libraries were quantified using the AccuClear Ultra High Sensitivity dsDNA Standards Assay Kit (Biotium) and a FLUOstar Omega plate reader (BMG Labtech). Prior to sequencing, libraries were normalised to 10 ng/μL. Normalised libraries were quantified again to create equimolar and/or weighted 2.8 nM pools. Pool concentrations were checked using the Agilent 4200 TapeStation (Agilent) with High Sensitivity D500 reagents before sequencing. Sequencing was performed using paired-end 150 bp reads on the Illumina NovaSeq 6000. RNA library preparation and sequencing Libraries were prepared using the NEBNext ® Ultra™ II Directional RNA Library Prep Kit for Illumina (New England Biolabs), following the manufacturer’s instructions. Poly(A) mRNA in the total RNA solution was isolated using oligo (dT) beads, converted to cDNA, and uniquely indexed; 14 PCR cycles were performed. Libraries were size-selected to produce fragments between 100–300 bp. Libraries were quantified, normalised, pooled to a final concentration of 2.8 nM, and diluted to 150 pM for loading. Sequencing was carried out on the Illumina NovaSeq X to generate 150-bp paired-end reads. Genome assembly Prior to assembly of the PacBio HiFi reads, a database of k-mer counts ( k = 31) was generated from the filtered reads using FastK. GenomeScope2 ( Ranallo-Benavidez et al., 2020) was used to analyse the k-mer frequency distributions, providing estimates of genome size, heterozygosity, and repeat content. The HiFi reads were assembled using Hifiasm in Hi-C phasing mode ( Cheng et al., 2021, 2022), producing two haplotypes. Hi-C reads ( Rao et al., 2014) were mapped to the primary contigs using bwa-mem2 ( Vasimuddin et al., 2019). Contigs were further scaffolded with Hi-C data in YaHS ( Zhou et al., 2023), using the --break option for handling potential misassemblies. The scaffolded assemblies were evaluated using Gfastats ( Formenti et al., 2022), BUSCO ( Manni et al., 2021) and MerquryFK ( Rhie et al., 2020). The organelle genomes were assembled using OATK ( Zhou et al., 2025). Assembly curation The assembly was decontaminated using the Assembly Screen for Cobionts and Contaminants ( ASCC) pipeline. TreeVal was used to generate the flat files and maps for use in curation. Manual curation was conducted primarily in PretextView and HiGlass ( Kerpedjiev et al., 2018). Scaffolds were visually inspected and corrected as described by Howe et al. (2021). Manual corrections included seven breaks and seven joins, which reduced the scaffold N50 by 30.8%. The curation process is described at https://gitlab.com/wtsi-grit/rapid-curation . PretextSnapshot was used to generate a Hi-C contact map of the final assembly. Assembly quality assessment The MerquryFK tool ( Rhie et al., 2020) was run in a Singularity container ( Kurtzer et al., 2017) to evaluate k-mer completeness and assembly quality for both haplotypes using the k-mer database ( k = 31) computed prior to genome assembly. The analysis outputs included assembly QV scores and completeness statistics. The genome was analysed using the BlobToolKit pipeline, a Nextflow implementation of the earlier Snakemake version ( Challis et al., 2020). The pipeline aligns PacBio reads using minimap2 ( Li, 2018) and SAMtools ( Danecek et al., 2021) to generate coverage tracks. It runs BUSCO ( Manni et al., 2021) using lineages identified by querying NCBI datasets ( O’Leary et al., 2024). For the three domain-level lineages, BUSCO genes are aligned to the UniProt Reference Proteomes database ( Bateman et al., 2023) using DIAMOND blastp ( Buchfink et al., 2021). The genome is divided into chunks based on the density of BUSCO genes from the closest taxonomic lineage, and each chunk is aligned to the UniProt Reference Proteomes database with DIAMOND blastx. Sequences without hits are chunked using seqtk and aligned to the NT database with blastn ( Altschul et al., 1990). The BlobToolKit suite consolidates all outputs into a blobdir for visualisation. The BlobToolKit pipeline was developed using nf-core tooling ( Ewels et al., 2020) and MultiQC ( Ewels et al., 2016), with containerisation through Docker ( Merkel, 2014) and Singularity ( Kurtzer et al., 2017). Genome sequence report Sequence data The genome of a specimen of Vicia sativa was sequenced using Pacific Biosciences single-molecule HiFi long reads, generating 68.19 Gb (gigabases) from 6.10 million reads, which were used to assemble the genome. GenomeScope2.0 analysis estimated the haploid genome size at 1 903.55 Mb, with a heterozygosity of 0.04% and repeat content of 61.72% ( Figure 2). Using flow cytometry, the genome size (1C-value) of the sample was estimated to be 2.15 pg, equivalent to 2 100.00 Mb. These estimates guided expectations for the assembly. Based on the estimated genome size, the sequencing data provided approximately 35× coverage. Hi-C sequencing produced 239.03 Gb from 791.50 million reads, which were used to scaffold the assembly. RNA sequencing data were also generated and are available in public sequence repositories. Table 1 summarises the specimen and sequencing details. Frequency distribution of k-mers generated using GenomeScope2. The plot shows observed and modelled k-mer spectra, providing estimates of genome size, heterozygosity, and repeat content based on unassembled sequencing reads. Table 1. Specimen and sequencing data for Vicia sativa (BioProject PRJEB73930).PlatformPacBio HiFiHi-C RNA-seq ToLID drVicSati1drVicSati1drVicSati1 Specimen ID KDTOL10205KDTOL10205KDTOL10205 BioSample (source individual) SAMEA9143096SAMEA9143096SAMEA9143096 BioSample (tissue) SAMEA9144020SAMEA9144020SAMEA9144020 Tissue leafleafleaf Instrument RevioIllumina NovaSeq 6000Illumina NovaSeq X Run accessions ERR12760815; ERR12760816; ERR12760814ERR12765190ERR13962510 Read count total 6.10 million reads791.50 million read pairs40.52 million read pairs Base count total 68.19 Gb239.03 Gb12.24 Gb Specimen and sequencing data for Vicia sativa (BioProject PRJEB73930). Assembly statistics The genome was assembled into two haplotypes using Hi-C phasing. Haplotype 1 was curated to chromosome level, while haplotype 2 was assembled to scaffold level. The final assembly has a total length of 1 748.92 Mb in 255 scaffolds, with 46 gaps, and a scaffold N50 of 346.55 Mb ( Table 2). Table 2. Genome assembly statistics for Vicia sativa. Genome assemblyHaplotype 1Haplotype 2 Assembly name drVicSati1.hap1.1drVicSati1.hap2.1 Assembly accession GCA_964197575.1GCA_964197585.1 Assembly level chromosomescaffold Span (Mb) 1 748.921 751.13 Number of chromosomes 6scaffold-level Number of contigs 301179 Contig N50 55.95 Mb72.2 Mb Number of scaffolds 255143 Scaffold N50 346.55 Mb347.19 Mb Longest scaffold length (Mb) 406.95409.92 Organelles Mitochondrial genome: 405.76 kb; Plastid genome: 124.62 kb- Genome assembly statistics for Vicia sativa. Most of the assembly sequence (98.95%) was assigned to 6 chromosomal-level scaffolds. These chromosome-level scaffolds, confirmed by Hi-C data, are named according to size ( Figure 3; Table 3). Hi-C contact map of the Vicia sativa genome assembly. Assembled chromosomes are shown in order of size and labelled along the axes, with a megabase scale shown below. The plot was generated using PretextSnapshot. Table 3. Chromosomal pseudomolecules in the haplotype 1 genome assembly of Vicia sativa drVicSati1.INSDC accessionMoleculeLength (Mb)GC%OZ078044.11406.9536.50OZ078045.12357.7736OZ078046.13346.5536OZ078047.14267.9436OZ078048.15184.1036.50OZ078049.16167.3036 Chromosomal pseudomolecules in the haplotype 1 genome assembly of Vicia sativa drVicSati1. The mitochondrial genome (length 405.76 kb, OZ078050.1) and plastid genome (length 124.62 kb, OZ078051.1) were also assembled. These sequences are included as contigs in the multifasta file of the genome submission and as standalone records. Assembly quality metrics For haplotype 1, the estimated QV is 63.4, and for haplotype 2, 62.9. When the two haplotypes are combined, the assembly achieves an estimated QV of 63.1. The k-mer completeness is 98.98% for haplotype 1, 99.11% for haplotype 2, and 99.14% for the combined haplotypes ( Figure 4). Evaluation of k-mer completeness using MerquryFK. This plot illustrates the recovery of k-mers from the original read data in the final assemblies. The horizontal axis represents k-mer multiplicity, and the vertical axis shows the number of k-mers. The black curve represents k-mers that appear in the reads but are not assembled. The green curve corresponds to k-mers shared by both haplotypes, and the red and blue curves show k-mers found only in one of the haplotypes. BUSCO analysis using the fabales_odb10 reference set ( n = 5 366) identified 98.2% of the expected gene set (single = 94.2%, duplicated = 4.0%) for haplotype 1. The snail plot in Figure 5 summarises the scaffold length distribution and other assembly statistics for haplotype 1. The blob plot in Figure 6 shows the distribution of scaffolds by GC proportion and coverage for haplotype 1. Assembly metrics for drVicSati1.hap1.1. The BlobToolKit snail plot provides an overview of assembly metrics and BUSCO gene completeness. The circumference represents the length of the whole genome sequence, and the main plot is divided into 1,000 bins around the circumference. The outermost blue tracks display the distribution of GC, AT, and N percentages across the bins. Scaffolds are arranged clockwise from longest to shortest and are depicted in dark grey. The longest scaffold is indicated by the red arc, and the deeper orange and pale orange arcs represent the N50 and N90 lengths. A light grey spiral at the centre shows the cumulative scaffold count on a logarithmic scale. A summary of complete, fragmented, duplicated, and missing BUSCO genes in the set is presented at the top right. An interactive version of this figure can be accessed on the BlobToolKit viewer. BlobToolKit blob plot for drVicSati1.hap1.1. The plot shows base coverage (vertical axis) and GC content (horizontal axis). The circles represent scaffolds, with the size proportional to scaffold length and the colour representing phylum membership. The histograms along the axes display the total length of sequences distributed across different levels of coverage and GC content. An interactive version of this figure is available on the BlobToolKit viewer. Table 4 lists the assembly metric benchmarks adapted from Rhie et al. (2021) and the Earth BioGenome Project Report on Assembly Standards January 2026. The EBP metric calculated for the haplotype 1 is 7.C.Q63, meeting the recommended 6.C.Q40 reference standard. Table 4. Earth Biogenome Project summary metrics for the Vicia sativa assembly.MeasureValueBenchmarkEBP summary (haplotype 1)7.C.Q636.C.Q40Contig N50 length55.95 Mb≥ 1 MbScaffold N50 length346.55 Mb= chromosome N50Consensus quality (QV)Haplotype 1: 63.4; haplotype 2: 62.9; combined: 63.1≥ 40 k-mer completenessHaplotype 1: 98.98%; Haplotype 2: 99.11%; combined: 99.14%≥ 95%BUSCOC:98.2% [S:94.2%, D:4.0%], F:0.1%, M:1.7%, n:5 366S > 90%; D < 5%Percentage of assembly assigned to chromosomes98.95%≥ 90% Notes: The EBP summary uses log10(Contig N50); chromosome-level (C) or log10(Scaffold N50); Q (Merqury QV). BUSCO: C = complete; S = single-copy; D = duplicated; F = fragmented; M = missing; n = orthologues Earth Biogenome Project summary metrics for the Vicia sativa assembly. Notes: The EBP summary uses log10(Contig N50); chromosome-level (C) or log10(Scaffold N50); Q (Merqury QV). BUSCO: C = complete; S = single-copy; D = duplicated; F = fragmented; M = missing; n = orthologues Table 5. Software versions and sources used for Vicia sativa. SoftwareVersionSourceBLAST2.14.0 ftp://ftp.ncbi.nlm.nih.gov/blast/executables/blast+/ BlobToolKit4.3.9 https://github.com/blobtoolkit/blobtoolkit BUSCO5.5.0 https://gitlab.com/ezlab/busco bwa-mem22.2.1 https://github.com/bwa-mem2/bwa-mem2 DIAMOND2.1.8 https://github.com/bbuchfink/diamond fasta_windows0.2.4 https://github.com/tolkit/fasta_windows FastK1.1 https://github.com/thegenemyers/FASTK GenomeScope2.02.0.1 https://github.com/tbenavi1/genomescope2.0 Gfastats1.3.6 https://github.com/vgl-hub/gfastats Hifiasm0.19.8-r603 https://github.com/chhylp123/hifiasm HiGlass1.13.4 https://github.com/higlass/higlass MerquryFK1.1.2 https://github.com/thegenemyers/MERQURY.FK Minimap22.24-r1122 https://github.com/lh3/minimap2 Oatk0.9 https://github.com/c-zhou/oatk MultiQC1.14; 1.17 and 1.18 https://github.com/MultiQC/MultiQC Nextflow23.10.0 https://github.com/nextflow-io/nextflow PretextSnapshot0.0.5 https://github.com/sanger-tol/PretextSnapshot PretextView1.0.3 https://github.com/sanger-tol/PretextView samtools1.19.2 https://github.com/samtools/samtools sanger-tol/ascc0.1.0 https://github.com/sanger-tol/ascc sanger-tol/blobtoolkit0.5.0 https://github.com/sanger-tol/blobtoolkit sanger-tol/curationpretext1.4.2 https://github.com/sanger-tol/curationpretext Seqtk1.3 https://github.com/lh3/seqtk Singularity3.9.0 https://github.com/sylabs/singularity TreeVal1.4.0 https://github.com/sanger-tol/treeval YaHS1.2a.2 https://github.com/c-zhou/yahs Software versions and sources used for Vicia sativa. Genome annotation report The Vicia sativa genome assembly (GCA_964197575.1) was annotated by Ensembl at the European Bioinformatics Institute (EBI). This annotation includes 21 593 transcribed mRNAs from 11 105 protein-coding and 5 867 non-coding genes. The average transcript length is 3 063.32 bp, with an average of 1.27 coding transcripts per gene and 4.62 exons per transcript. For further information about the annotation, please refer to the annotation page on Ensembl. Author information •Members of the Royal Botanic Gardens Kew Genome Acquisition Lab •Members of the Plant Genome Sizing Collective •Members of the Darwin Tree of Life Barcoding collective •Members of the Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team •Members of Wellcome Sanger Institute Scientific Operations – Sequencing Operations •Members of the Wellcome Sanger Institute Tree of Life Core Informatics team •Members of the Tree of Life Core Informatics collective •Members of the Darwin Tree of Life Consortium •Members of the Royal Botanic Gardens Kew Genome Acquisition Lab Members of the Royal Botanic Gardens Kew Genome Acquisition Lab •Members of the Plant Genome Sizing Collective Members of the Plant Genome Sizing Collective •Members of the Darwin Tree of Life Barcoding collective Members of the Darwin Tree of Life Barcoding collective •Members of the Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team Members of the Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team •Members of Wellcome Sanger Institute Scientific Operations – Sequencing Operations Members of Wellcome Sanger Institute Scientific Operations – Sequencing Operations •Members of the Wellcome Sanger Institute Tree of Life Core Informatics team Members of the Wellcome Sanger Institute Tree of Life Core Informatics team •Members of the Tree of Life Core Informatics collective Members of the Tree of Life Core Informatics collective •Members of the Darwin Tree of Life Consortium Members of the Darwin Tree of Life Consortium Wellcome sanger institute – Legal and governance The materials that have contributed to this genome note have been supplied by a Darwin Tree of Life Partner. The submission of materials by a Darwin Tree of Life Partner is subject to the ‘Darwin Tree of Life Project Sampling Code of Practice’, which can be found in full on the Darwin Tree of Life website. By agreeing with and signing up to the Sampling Code of Practice, the Darwin Tree of Life Partner agrees they will meet the legal and ethical requirements and standards set out within this document in respect of all samples acquired for, and supplied to, the Darwin Tree of Life Project. Further, the Wellcome Sanger Institute employs a process whereby due diligence is carried out proportionate to the nature of the materials themselves, and the circumstances under which they have been/are to be collected and provided for use. The purpose of this is to address and mitigate any potential legal and/or ethical implications of receipt and use of the materials as part of the research project, and to ensure that in doing so we align with best practice wherever possible. The overarching areas of consideration are: •Ethical review of provenance and sourcing of the material•Legality of collection, transfer and use (national and international) •Ethical review of provenance and sourcing of the material Ethical review of provenance and sourcing of the material •Legality of collection, transfer and use (national and international) Legality of collection, transfer and use (national and international) Each transfer of samples is further undertaken according to a Research Collaboration Agreement or Material Transfer Agreement entered into by the Darwin Tree of Life Partner, Genome Research Limited (operating as the Wellcome Sanger Institute), and in some circumstances, other Darwin Tree of Life collaborators. In this manuscript, Christenhusz et al. describe the genome of the legume Vicia sativa, produced as part of the Darwin Tree of Life project. Data were produced, processed, and analyzed using state-of-the-art software tools typically used in genome projects of this scale (such as ERGA, Earth BioGenome Project, etc). As a consequence, the obtained genome assembly and annotation are of very high quality. The genome will be very valuable to the community, especially to those studying genome evolution in legumes. Therefore, I believe this manuscript can be accepted in its current form. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Evolutionary genomics, Systems Biology, Bioinformatics I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. The current Data Note reports the full genome assembly of Vicia sativa L. as a part of the Darwin Tree of Life Project. This is a well-prepared manuscript with high-quality and valuable genome resources that meet current standards for genome notes. Therefore, in my opinion, it can be considered for acceptance for indexation. Only a minor correction should be addressed according to the inconsistent common name of Vicia sativa in the abstract (Narrowleaf Vetch) and introduction (Common Vetch). Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Plant genomics, comparative genomics, bioinformatics, and molecular biology I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard.