Crystal structure and Hirshfeld surface analysis of 6-bromo-2-(penta­fluoro­phen­yl)-2,3,7,7a-tetra­hydro-3a,6-ep­oxy­isoindol-1(6H)-one Authors: Viktoria S. Maslova, Veronika M. Cherepanova, Victor N. Khrustalev, Mehmet Akkurt, Gizachew Mulugeta Manahelohe, Khudayar I. Hasanov, Narmina A. Guliyeva Published: 2026 ABSTRACT In the crystal, enanti­omeric mol­ecules are linked by C—H⋯O hydrogen bonds, forming layers parallel to the (101) plane. In addition, C—H⋯π inter­actions and Br⋯π contacts create layers parallel to the (101) plane. Chemical context Fluorinated organic compounds occupy a special place among functionally substituted mol­ecules, since the introduction of fluorine atoms significantly affects the electronic structure and polarity of mol­ecules (Reichenbächer et al., 2005 ▸; Cole & Taylor, 2022 ▸). In this regard, polyfluorinated aromatic systems containing halogen atoms capable of acting as a halogen-bond donor are of particular inter­est. According to modern concepts, a halogen bond occurs when an electrophilic region associated with a halogen atom inter­acts with the nucleophilic centre of another mol­ecule or the same mol­ecule (Desiraju et al., 2013 ▸; Huseynov et al., 2021 ▸). The directionality of such a bond is usually explained by the presence of a σ-hole region of positive electrostatic potential on the continuation of the C—X bond (Politzer et al., 2010 ▸; Maslova et al., 2026 ▸). Polyfluorination of the aromatic fragment enhances the electron-acceptor character of the system and can increase the positive potential on the halogen atom, thereby increasing the ability of the compound to form halogen bonds (Riley et al., 2011 ▸; Mamedov et al., 2024 ▸; Javadzade et al., 2026 ▸). Although bromine-containing donors usually form weaker inter­actions compared to iodine-containing analogues, the presence of a penta­fluoro­phenyl fragment makes such systems promising candidates for studying Br⋯N, Br⋯O, and Br⋯π contacts (Yang et al., 2018 ▸; Guseinov et al., 2025 ▸; Makhmudova et al., 2022 ▸). We therefore synthesized and elucidated the crystal structure of the title compound. Structural commentary The title compound crystallizes in the centrosymmetric space group P21/n, and therefore occurs as a racemic mixture of the 3aR,6S,7aS and 3aS,6R,7aR enantiomers. In the seven-membered ring system (O8/C3A/C4–C7/C7A) of the mol­ecule (Fig. 1 ▸), the two five-membered A and B rings (A: O8/C3A/C4–C6 and B: O8/C3A/C6/C7/C7A) have the puckering parameters Q(2) = 0.6054 (19) Å, φ(2) = 355.9 (2)°, and Q(2) = 0.267 (2) Å, φ(2) = 282.7 (4)°, respectively, and adopt an envelope conformation on the O8 atom. The six-membered ring (C: C3A/C4–C7/C7A) has the puckering parameters QT = 0.947 (2) Å, θ = 90.74 (12)°, φ = 177.46 (13)° and exhibits a boat conformation. The five-membered pyrrolidine ring (D: N2/C1/C3/C3A/C7A) fused to the seven-membered ring system (O8/C3A/C4–C7/C7A) has the puckering parameters Q(2) = 0.267 (2) Å, φ(2) = 282.7 (4) ° and adopts an envelope conformation on atom C3A. The angles between the pentafluoro­phenyl ring (E: C8–C13) and the C (C3A/C4–C7/C7A) and D (N2/C1/C3/C3A/C7A) planes are 45.95 (11) and 69.23 (10)°, respectively. The C and D rings subtend an angle of 39.15 (12)°. The bond lengths and angles are comparable to those in the related structures discussed in the Database survey section. Supra­molecular features and Hirshfeld surface analysis In the crystal, mol­ecules are linked by C—H⋯O hydrogen bonds, forming layers parallel to the (01) plane (Table 1 ▸, Fig. 2 ▸). In addition, C—H⋯π (Table 1 ▸) and Br⋯π inter­actions [(C6)Br1⋯Cg5ii: C6—Br1 = 1.9249 (18) Å, Br1⋯Cg5ii = 3.6147 (9) Å, C6⋯Cg5ii = 3.988 (2) Å and C6—Br1⋯Cg5ii = 86.43 (6)°; Cg5 is the centroid of the penta­fluoro­phenyl ring (C8–C13); symmetry code (ii) −x + 1, −y + 1, −z + 1] act in opposite directions of the plane of the penta­fluoro­phenyl ring, bonding mol­ecules form layers parallel to the (10) plane (Fig. 3 ▸). In order to qu­antify the inter­molecular inter­actions, a Hirshfeld surface analysis was carried out using Crystal Explorer 21 (Spackman et al., 2021 ▸) and the associated two-dimensional fingerprint plots were generated. The Hirshfeld surface mapped over dnorm in the range −0.2735 to +1.2893 a.u. is shown in Fig. 4 ▸, using colours to indicate contacts that are shorter (red areas), equal to (white areas), or longer than (blue areas) the sum of the van der Waals radii. The C—H⋯O inter­actions are indicated by red areas on the Hirshfeld surfaces (Tables 1 ▸ and 2 ▸). The two-dimensional fingerprint plots provide qu­anti­tative information about the non-covalent inter­actions and the crystal packing in terms of the percentage contribution of the inter­atomic contacts. The overall two-dimensional fingerprint plot is shown in Fig. 5 ▸a. The dominant inter­actions in the crystal packing are F⋯H/H⋯F (32.4%), O⋯H/H⋯O (12.4%), F⋯F (11.5%), Br⋯F / F⋯Br (8.4%) and C⋯H/H⋯C (8.4%) contacts; see Fig. 5b–f ▸. The other contacts (H⋯H 6.7%, Br⋯H/H⋯Br 5.9%, Br⋯C/C⋯Br 4.6%, O⋯C/C⋯O 2.5%, F⋯O/O⋯F 2.2%, F⋯C/C⋯F 1.7%, C⋯C 1.6%, Br⋯Br 1.2%, O⋯N/N⋯O 0.3% and N⋯H/H⋯N 0.1%) only make a minor contribution to the crystal packing. Database survey A search of the Cambridge Structural Database (CSD, Version 6.00, update of April 2025; Groom et al., 2016 ▸) for the 1,2,3,6,7,7a-hexa­hydro-3a,6-ep­oxy­iso­indole unit revealed five analogues: BILLEP (Mitchell et al., 2013 ▸), BILLAL (Mitchell et al., 2013 ▸), VAMREL (Shchevnikov et al., 2026 ▸), DUBYUX (Tan et al., 2020 ▸) and DUBZAE (Tan et al., 2020 ▸). Although there are no conventional hydrogen bonds in BILLEP, there are weaker inter­actions between the mol­ecules, such as C—H⋯O and C—H⋯N, as compared to N—H⋯O hydrogen bonds in BILLAL. Compound BILLAL packs head-to-head with hydrogen bonding, whereas compound BILLEP packs head-to-tail with regard to the ether groups. The asymmetric unit of VAMREL contains two crystallographically independent mol­ecules in which the cyclo­hexene and pyrrole rings are in boat and envelope conformations, respectively. In the crystal, C—H⋯O and N—H⋯Se hydrogen bonds link the mol­ecules into [100] chains, enclosing (20), (18) and (4) ring motifs (Bernstein et al., 1995 ▸). C—H⋯π (ring) inter­actions help to consolidate the packing. In DUBYUX, mol­ecules are linked by π–π inter­actions into chains along the b-axis direction. At the same time, C—H⋯π inter­actions also link DUBYUX mol­ecules into chains extending along the b-axis direction. These inter­actions form layers parallel to the ab plane. In the crystal structure of DUBZAE, hydrogen bonds, C— H⋯π and π–π inter­actions occur between mol­ecules. Synthesis and crystallization Penta­fluoro­aniline (1045 mg, 5.71 mmol) was added to the corresponding 5-bromo­furfural (1000 mg, 5.71 mmol) in toluene (20 ml). The reaction mixture was heated under reflux for 5 days using a Dean–Stark trap (TLC control). After the reaction was completed, the solution was concentrated. The residue was dissolved in methanol (15 ml) and sodium borohydride (430 mg, 11.4 mmol) was added portionwise (36 mg in every 5 min) over a period of 1 h. The resulting mixture was stirred at room temperature for 24 h (TLC control, hexa­ne–EtOAc, 10:1). The reaction mixture was poured into water (30 ml) and extracted with DCM (3 × 30 ml). The organic layers were dried with anhydrous MgSO4, concentrated and purified by column chromatography (SiO2, 23 × 1.6 cm, eluent hexane-EtOAc, 50:1) to afford N-[(5-bromo­furan-2-yl)meth­yl]-2,3,4,5,6-penta­fluoro­aniline in good yield. Yellow oil, yield 63%, 1228 mg (3.59 mmol). 1H NMR (700.2 MHz, CDCl3), (J, Hz) δ 6.22 (s, 2 H, H-3 and H-4 Fur), 4.42 (d, J = 7.2 Hz, 2 H, NCH2), 4.01 (br. s, 1 H, NH). 13C NMR (176.1 MHz, CDCl3) δ 153.8, 138.4 (dm, J = 244.4 Hz, 2 C, C—F), 138.1 (dm, J = 248.5 Hz, 2 C, C—F), 134.3 (dm, J = 245.8 Hz, 1 C, C—F), 122.5 (t, J = 12.1 Hz, 1 C, C—Ar), 121.9, 112.0, 110.7, 42.9 (t, J = 4.1 Hz, 1 C, CH2). 19F NMR (658.8 MHz, CDCl3) δ −158.0 (d, J = 21.5 Hz, 2 F, F-2,6 Ar), −163.9 (t, J = 21.5 Hz, 2 F, F-3,5 Ar), −169.5 (d, J = 21.5 Hz, 1 F, F-4 Ar). IR (KBr, cm−1): νmax = 3316 (NH), 1124, 1011, 964, 787 (C-Hal). GC—MS (EI, 70 eV) m/z: 343 [M, Br81]+, 341 [M, Br79]+, 194 (10), 161 (98), 159 (100), 155 (14), 133 (45), 131 (47), 117 (13), 51 (26). N-[(5-bromo­furan-2-yl)meth­yl]-2,3,4,5,6-penta­fluoro­aniline (1200 mg, 3.51 mmol), and Et3N (1.1 ml, 8.07 mmol) were dissolved in pseudocumene (50 ml) and stirred for 5 min. Acryloyl chloride was added (0.51 ml, 6.32 mmol), and the reaction mixture was heated under reflux for 5 days (TLC control, hexa­ne–EtOAc, 1:1). After cooling, the reaction mixture was filtered, and the filtrate was poured into water (30 ml) and extracted with EtOAc (3 × 30 ml). The organic layers were dried with anhydrous MgSO4. The solvent was evaporated at reduced pressure, and the residue was triturated with ether (2 × 15 ml) to isolate 6-bromo-2-(penta­fluoro­phen­yl)-2,3,7,7a-tetra­hydro-3a,6-ep­oxy­isoindol-1(6H)-one. The precipitate was filtered off and washed with ether (2 × 15 ml). Brown powder, yield 47%, 653 mg (1.65 mmol), m.p. 453–455 K. Single crystals were grown in DMSO at 281 K. 1H NMR (700.2 MHz, CDCl3), (J, Hz) δ 6.56 and 6.55 (two d, J = 5.7 Hz, 2 H, H-4 and H-5), 4.41 (d, J = 11.4 Hz, 1 H, H-3A), 4.08 (d, J = 11.4 Hz, 1 H, H-3B), 2.83 (dd, J = 8.6, 3.6 Hz, 1 H, H-7a), 2.66 (dd, J = 12.2, 3.6 Hz, 1 H, H-7A), 2.35 (dd, J = 12.2, 8.6 Hz, 1 H, H-7B). 13C NMR (176.1 MHz, CDCl3) δ 172.0, 144.1 (dm, J = 253.9 Hz, 2 C, C—F), 141.6, 141.2 (dm, J = 255.9 Hz, 1 C, C—F), 138.0 (dm, J = 247.8 Hz, 2 C, C—F), 133.6, 112.7 (t, J = 11.5 Hz, 1 C, C—Ar), 88.8, 88.5, 51.3, 49.4, 39.6. 19F NMR (658.8 MHz, DMSO-d6) δ −144.3 (br. s, 2 F, F-2,6 Ar), −155.5 (d, J = 21.5 Hz, 1 F, F-4 Ar), −162.8 (t, J = 21.5 Hz, 2 F, F-3,5 Ar). IR (KBr, cm−1): νmax = 1709 (C=O), 1120, 1095, 953, 926, 840, 718, 662 (C–Hal). GC—MS (EI, 70 eV) m/z: 397 [M, Br81]+, 395 [M, Br79]+, 316 (100), 220 (31), 194 (36), 167 (13), 161 (62), 159 (60), 132 (15), 131 (23), 117 (12), 77 (15), 55 (58). Refinement Crystal data, data collection and structure refinement details are summarized in Table 3 ▸. All C-bound H atoms were positioned geometrically and refined using a riding model, with C—H = 0.95–1.00 Å and Uiso(H) = 1.2Ueq(C). Supplementary Material Crystal structure: contains datablock(s) I. DOI: 10.1107/S2056989026008108/tx2114sup1.cif Structure factors: contains datablock(s) I. DOI: 10.1107/S2056989026008108/tx2114Isup2.hkl Supporting information file. DOI: 10.1107/S2056989026008108/tx2114Isup3.cml CCDC reference: 2579217 Additional supporting information: crystallographic information; 3D view; checkCIF report