High Upper Critical Field and Type II Superconductivity in Epitaxial Cubic W2N Thin Films Authors: Aditya Singh, Arnaud le Febvrier, Sanath Kumar Honnali, Abhisek Mishra, Grzegorz Greczynski, Subhankar Bedanta, Per Eklund, Ajay Soni Published: 2026 ABSTRACT ABSTRACTTransition Metal Nitrides (TMNs) are a versatile class of materials, combining chemical robustness, high hardness, and superconducting behaviour with critical temperatures between 2–10 K. While several binary TMNs have been explored, superconductivity in stoichiometric W2N has remained largely unexplored. Here, we report on superconducting thin films of stoichiometric W2N, demonstrating a distinctly high upper critical field (Hc2 ) of ∼ 8.5 T, uncommon among binary TMNs. This robust superconducting response under high magnetic fields highlights the technological relevance of W2N for integrated quantum and cryogenic electronic platforms. Overall, these results position stoichiometric W2N as a promising addition to the TMN superconducting landscape, opening new avenues for functional materials design based on chemically stable and mechanically resilient nitrides.Keywords: superconductivity, thin films, tungsten nitride, upper critical field Introduction Transition metal nitrides (TMNs) constitute a versatile class of materials characterized by a unique interplay of metallic and covalent bonding, which imparts an exceptional combination for mechanical robustness, thermal stability, and electronic tunability [1]. The bonding hybridization underlies their widespread use in applications such as diffusion barriers, protective coatings, and cutting tools [2, 3, 4, 5]. Beyond their mechanical resilience, TMNs exhibit rich electronic phenomena and applications, ranging from metal–insulator transitions [6], ferromagnetism [7], spintronic functionalities [8] and superconductivity [9]. The incorporation of nitrogen atoms strengthens the metal–nitrogen bonds and enhances electron–phonon (e‐ph) coupling, which plays a pivotal role in mediating superconductivity [10]. Several TMNs such as InN, HfN, ZrN, Mo2N, Nb2N, ReN, RuN, TiN, and VN [11, 12, 13, 14, 15, 16, 17, 18] have been explored for their low‐temperature electronic transport properties, underscoring their potential as tuneable superconducting platforms. Furthermore, TMNs can crystallize in several structural polymorphs, such as hexagonal [19], cubic [18], orthorhombic [20], rhombohedral [21], and tetragonal phases [22], each associated with distinct electronic structures and phonon dynamics. The superconducting properties are strongly structure‐dependent, for instance, hexagonal MoN exhibits a relatively high critical temperature (Tc ∼ 13 K) [23], whereas cubic Mo2N typically shows a lower Tc ∼ 5–6 K [18], revealing the sensitivity of superconductivity to lattice symmetry and bonding environment. Nitrogen stoichiometry also plays a decisive role, as even small deviations can significantly alter carrier concentrations, induce lattice strain, and modulate e‐ph coupling strength [24]. Among TMNs, tungsten nitrides (W–N) are particularly interesting due to their polymorphic nature and multiple applications such as mechanical hardness, diffusion barrier performance, catalytic activity, and electrochemical energy storage capabilities [25, 26, 27, 28, 29]. Multiple phases such as cubic W3N4, hexagonal and rhombohedral W2N3 [21], cubic WN [30], and cubic W2N, have been reported, each with distinct structural and electronic characteristics. However, despite this structural richness, the relationship between phase formation, nitrogen stoichiometry, and superconducting behaviour in the W–N system remains poorly understood. The physical properties of these materials are highly sensitive to the W:N ratio and crystallographic phase, thus controlling stoichiometry within a specific crystal structure is important for getting bespoke properties. Theoretical predictions [31] have suggested W2N as a potential superconductor coexisting with a possible charge‐density‐wave instability, yet experimental validation has been scarce. Prior studies have primarily focused on tungsten thin films synthesized under varying N2: Ar atmospheres, yielding multiphase materials comprising metallic W, nitrogen‐stabilized β‐W, and W2N inclusions [32, 33, 34]. Consequently, the intrinsic superconducting properties of stoichiometric W2N have remained ambiguous. Previous reports have indicated superconductivity near 1.3 K, only marginally higher than that of pure tungsten (Tc ∼ 0.011 K) [35], in sharp contrast to other TMNs where nitrogen incorporation substantially enhances Tc for instance, in case of Nb, Tc ∼ 9 K, while NbN has Tc ∼ 18 K [36, 37]. Thus, in the case of W2N, the role of structure, stoichiometry, and bonding provides a platform to explore the superconductivity in this material. In this work, we address this research gap by presenting the first comprehensive experimental investigation of superconductivity in stoichiometric W2N thin films. The films are grown via reactive DC sputtering on Al2O3 and MgO substrates with an average thickness of ∼ 270 nm, exhibiting a clear superconducting Tc around ∼ 5K. The superconducting behaviour is further corroborated by a distinct diamagnetic transition observed within the same temperature range, confirming the bulk nature of the superconductivity. Magnetization and resistivity measurements at different applied magnetic fields are employed to determine the lower (Hc1 ) and upper critical fields (Hc2 ), revealing values in the range of Hc1 ∼50 Oe and Hc2 ∼8.5 T, respectively. This comparatively high upper critical field, coupled with a relatively large intermediate state, indicates that W2N shows strong type‐II superconductivity. This characteristic is particularly significant for potential technological applications, such as in the development of high‐performance single‐photon detectors and other superconducting devices. Results and Discussion The optimized growth parameters were determined through preliminary depositions performed on c‐sapphire where the duration was limited to 30 mins. During that process systematic XRD analyses and elemental composition analysis by XPS were performed. While typically a rapid, surface‐sensitive tool for synthesis optimization, XPS was used here to determine the metal‐to‐nitrogen ratio and the thickness for optimizing thin film growth and to get the desired stoichiometry before depositing thicker films. In the optimized conditions described in the present article, the composition extracted from the XPS analysis shows a near‐stoichiometric composition with an N/W ratio of 0.52 (W2N1.04) (Table 1). A thickness of 54 nm was extracted from XRR analysis yielding a deposition rate of 1.8 nm/min (Figure S1). In the purpose of measuring transport properties, thicker films of 270 nm were deposited under the same condition on the same day and on two different substrate (c‐sapphire and MgO (111)). The 54 nm and 270 nm thick film on c‐sapphire have the same XRD pattern highlighting the reproducibility in short time span of the deposition process (Figure S2). TABLE 1Composition analysis using ERDA, RBS and XPS.SampleXPSERDA and RBS (at. %)Chemical formulaN/WN/WWNO270 nm W2N/MgO—0.5763.836.2—W2N1.14 270 nm W2N/Al2O3 —0.5463.834.31.8W2N1.08 54 nm W2N/Al2O3 0.52————W2N1.04 Composition analysis using ERDA, RBS and XPS. To achieve a more reliable and bulk‐sensitive compositional analysis of the thick films deposited on c‐sapphire and MgO (111), a combination of RBS and ToF‐ERDA was utilized. This dual approach is necessary to accurately quantify the heavy element (tungsten) and the lighter element (nitrogen), overcoming their strong mass contrast. Table 1 summarizes these bulk results alongside the XPS surface compositions obtained during the optimization process. The RBS and ToF‐ERDA analyses confirmed a composition close to the ideal 2:1 tungsten‐to‐nitrogen ratio. Specifically, W2N/Al2O3 exhibits a composition of W2N1.08, whereas W2N/MgO gives W2N1.14. These minor deviations from exact stoichiometry fall well within the typical tolerance range for sputtered transition‐metal nitrides and are consistent with stable W2N phase formation. Additionally, a minor oxygen signal (∼1.8 at. %) was detected in the W2N/Al2O3 film. Overall, these findings provide strong evidence for the successful deposition of near‐stoichiometric W2N thin films on both substrates. Figure 1a shows the full‐range XRD 2θ scan for both W2N/Al2O3 and W2N/MgO, confirming the overall phase purity of the films without any detectable secondary phases across the scanned range. Figure 1b presents the magnified 2θ window around 34–42°, where the dominant film and substrate peaks appear more clearly. The substrate reflections are identified at 2θ ∼ 41.6° and at 2θ ∼ 36.8° identified at 0001 Al2O3 (PDF 00‐046‐1212) and 111 MgO (PDF 01‐071‐6452). The diffraction peak observed at 2θ ∼ 36.7° (d‐spacing = 2.447 Å) for W2N/Al2O3 and at 2θ ∼ 36.6° (d‐spacing = 2.453 Å) for W2N/MgO is indexed to the 111 reflection of cubic W2N (PDF 00‐025‐1257), indicating a preferential out‐of‐plane (111) orientation. Pole Figure analysis (Figure S3) has been used to determine the epitaxial relationship for both films, which are as follows: (111) W2N || (0001) Al2O3 (out‐of‐plane) and [112¯]W2N || [101¯0] Al2O3 (in‐plane); and (111) W2N || (111) MgO (out‐of‐plane) and [110] W2N || [110] MgO (in plane). XRD patterns of W2N/MgO and W2N/Al2O3 in (a)10°–85° and (b) 33°–43°. RSM of (c,d) W2N/Al2O3 and (e,f) W2N/MgO films around the symmetric 111 and asymmetric 204 reflections, respectively. Note that qx and qz are expressed in units of 104 (Å− 1) for convenient representation. To further analyse the epitaxy, lattice coherence with the substrate, and strain of the films, Reciprocal Space Mapping (RSM) has been performed for both films. Figure 1c–f display the symmetrical RSM around the symmetric 111 reflections and the asymmetric 204 reflection measured on both films. Note that the out‐of‐plane direction (qz ) corresponds to the [111] direction, while the in‐plane direction (qx ) corresponds to the [01¯1] in‐plane of W2N. The substrate peaks are not visible and not shown in the RSM window for W2N/Al2O3 due to the different crystal symmetries between substrate and film (rhombohedral Al2O3 and cubic W2N), but all measurements have been performed after alignment on the substrate peak at the symmetrical position. The symmetrical RSM confirms the Bragg Brentano measurement, while the asymmetrical RSM confirms the epitaxial character of the films, with the possibility to resolve the structure of W2N. On c‐plane sapphire (Figure 1c,d) the extracted lattice constants (a = 4.188 Å, α = 90.62°) reveal an in‐plane strain of +0.52% and out‐of‐plane strain of –1.09%. On MgO (111) (Figure 1e,f), reflections from both the substrate and film overlap but, similarly to c‐sapphire, indicate a small deviation from a cubic symmetry. The extracted lattice parameters (a = 4.190 Å, α = 90.67°) reveal that the film has an in‐plane strain of +0.58% and an out‐of‐plane strain of –1.19%. On both substrates, W2N prosses relatively the same structure and lattice parameters with a slight deviation from a cubic cell with a cell parameter close to a ≈ 4.19 Å, α = 90.6 – 90.7 °. The rocking curve FWHMs of the 111 peaks have been extracted from the symmetrical RSM and are 3.1° and 3.0° for the film deposited on sapphire and MgO respectively. These values reflect the mosaic spread (orientational dispersion) of the crystallites, although such broadening may generally arise from factors such as strain gradients, defects, twin domains, or compositional inhomogeneity. Comprehensive structural, compositional, and crystallographic characterization confirms that the synthesized thin films are single phase W2N, like NaCl structure, with half‐filled nitrogen sites (N/W ratio = 0.55 ± 0.02), providing a solid foundation for the investigation of their low‐temperature transport properties. Figure 2a,b shows the temperature‐dependent resistivity plots of the thin films. The critical temperature (Tc ) for both films has been evaluated using the 90% criteria (Tconset), defined as the temperature at which the electrical resistivity drops to 90% of its normal‐state value. Using this criterion the Tc is found out to be ∼ 5 K (for W2N/Al2O3) and ∼ 5.06 K for (W2N/MgO) with a transition width (ΔTc ) = 1 K. Further onset of superconductivity is corroborated by the DC magnetization measurements (Figure 2c,d) with both films showing a sharp diamagnetic transition around ∼ 5 K. The small residual strains in the films (∼0.5% in‐plane) are not expected to significantly influence Tc , consistent with the nearly identical values observed on both the thin films. Temperature dependent Resistivity (ρ(T)) of (a) W2N/Al2O3​ and (b) W2N/MgO, ZFC and FC M‐T curves for (c) W2N/Al2O3​ and (d) W2N/MgO, (insets: low‐temperature data). The lower critical field (H c1 (T)) at different temperatures, have been estimated from the magnetic hysteresis (M‐H) measurements performed below Tc (Figure 3a,b) by using the Meissner–Ochsenfeld criterion [18]. Furthermore, to extract the H c1(0) the Hc1 vs T data has been fitted using the equation Hc1=Hc1(0)[1−(TTc)2] as shown in Figure 3c,d. The obtained values of H c1(0) are found to be ∼ 45 Oe for W2N/Al2O3 and ∼ 50 Oe for W2N/MgO. M‐ H plots (a,b) and Hc1 versus T (c,d) plots of W2N/Al2O3 and W2N/MgO, respectively. The red line denotes the fitting using the model provided in the text. The Hc2 is a crucial metric determining the operational range of superconductors in high‐field applications. Low temperature magnetoresistivity data (Figure 4a,b) reveal the shifting of critical temperature to the lower side, a characteristic feature of type II superconductors. Hc2 has been estimated from the Tconset criteria, where the normal state resistivity value is taken at 6 K. The obtained Hc2 vs T have been fitted using the Ginzburg Landau (GL) relation to obtain H c2(0), given by Hc2(T)=Hc2(0)(1−t2)(1+t2), where t is the reduced temperature given by t=TTc and H c2(0) is critical field at 0 K. H c2(0) estimated from GL model is found to be ∼ 8.23 T and ∼ 8.46 T for W2N/Al2O3 and W2N/MgO, respectively, as shown in Figure 4c,d. The superconducting performance of the W2N thin films is significantly enhanced compared with previously reported bulk WN, with (Tc ∼ 5) K and (Hc2 ∼ 8.2) T, compared with (Tc = 2.86) K and (Hc2 = 1.96) T for bulk WN [38]. Notably, the observed (Hc2) is more than three times higher than that reported for bulk WN, highlighting the enhanced superconducting robustness of the W2N thin‐film phase. The estimated Hc2 values for W2N rank among the highest reported for transition metal nitride superconductors [11, 12, 13, 14, 15, 16, 17, 18], highlighting the high‐field robustness of these epitaxial films. The only class of transition metal nitrides with consistently higher upper critical fields are the conventional NbN‐based superconductors [39, 40, 41]. Low temperature resistivity at different applied magnetic field for (a)W2N/Al2O3, (b) W2N/MgO. Hc2 vs T/Tc for (c) W2N/Al2O3, (d) W2N/MgO. The red line denotes the fitting of Hc2 with GL model [18]. The Hc2(0) is related to the normal state resistivity (ρ n ) by the relation given by Werthamer–Helfand–Hohenberg (WHH) approximation given by Hc2(0)=0.69Tc4eckbπN(0)ρn, where e, c, kb , N(0) corresponds to electronic charge, speed of light, Boltzmann constant, density of states at Fermi level respectively [17]. The high Hc2(0) in W2N can be ascribed to a combination of factors such as high Tc , higher N(0) and high ρ n as compared to the similar family of compounds [11, 12, 13, 14, 15, 16, 17, 18]. Further, we have extracted the zero‐temperature orbital limited upper critical field Hc2orb(0) from the WHH formula given as Hc2orb(0)=−0.693Tc(dHc2dT)T=Tc [18]. The calculated value of H c2(0) is 6.67 T for W2N/Al2O3 and 6.82 T for MgO‐111. The obtained H c2(0) from WHH approximation is lower than the ones obtained from GL fitting. Both these critical fields are less than Pauli Paramagnetic limit which is given by Hp = 1.86Tc (9.3 T for W2N/Al2O3 and 9.41 T for W2N/MgO and therefore indicating of a conventional BCS type superconductivity. In order to gain a deeper insight about the mechanisms governing the upper critical field, we have calculated the Maki parameter (α), which is given by α=2Hc2orb(0)Hp(0) [18]. In general, superconductivity can be destroyed either by the orbital pair‐breaking mechanism, where the Lorentz force on Cooper pairs suppresses phase coherence, or by the Pauli paramagnetic effect, where Zeeman splitting of electronic spins breaks the singlet pairing. The competition between these two mechanisms determines the limiting behaviour of Hc2 , with the Pauli limit becoming increasingly important in clean superconductors with short coherence lengths and large g‐factors. The obtained values of α are ∼1.01, 1.02 for W2N/Al2O3 and W2N/MgO, respectively. The observed α exceeding 1 signifies that the Pauli paramagnetic limiting effect is substantial and comparable to, orbital pair‐breaking [42]. Although α < 1.8, still greater than 1, thereby suggesting a potential formation of a Fulde‐Ferrell‐Larkin‐Ovchinnikov (FFLO) superconducting state, where Cooper pairs exhibit a finite momentum due to the spin imbalance induced by the magnetic field [43]. The GL coherence length (ξ GL ), which characterizes the spatial scale over which the superconducting order parameter, recovers in the presence of perturbations, given by ξGL=ϕ02πHc20, where ϕ0=2.068×10−15T.m2 is magnetic flux quantum, as calculated for both the films and found out to be ∼ 6.32 nm for W2N/Al2O3 and ∼ 6.23 nm for W2N/MgO. The GL London penetration depth (λ GL ), which measures penetration of magnetic flux into a superconductor before being screened by supercurrents, is evaluated from Hc1=ϕ04πλGL2lnλGLξGL, and is found to be ∼ 388 nm for W2N/Al2O3 and ∼ 366 nm for W2N/MgO. Furthermore, we have also evaluated GL parameter (κ GL ) given by κGL=λGLξGL, a strong indicator of type of superconductivity presents in the system and found to be ∼56 for W2N/Al2O3 and ∼59 for W2N/MgO, significantly larger than 12, indicating a strong type‐II superconductivity in both the synthesized thin films. The thermodynamical critical field (Hc ) is evaluated using the relation H c1(0).H c2 (0) = Hc 2 ln κ GL , which is found to be ∼ 960 Oe and ∼ 1020 Oe for W2N/Al2O3 and W2N/MgO respectively. All the estimated parameters for thin films are tabulated in Table 2. TABLE 2Thin Film characteristics of W2N on different substrates.Samplet (nm) Tc (K) Hc1(0) (Oe) Hc2(0) (T) Hc2orb(0) (T)Hc (Oe)ξ GL (nm)λ (nm)αW2N/Al2O3 2705458.236.679606.323881.01W2N/MgO2705.06508.466.8210206.233661.02 Thin Film characteristics of W2N on different substrates. Conclusion In summary, we demonstrate that stoichiometric W2N thin films exhibit robust type‐II superconductivity with an upper critical field of ∼ 8.5 T, positioning them among the strongest magnetic field resilient binary transition metal nitrides known to date. Analysis of the Maki parameter (α ∼ 1) indicates that Pauli paramagnetic effects are comparable to orbital pair‐breaking. This theoretical analysis suggests that W2N could serve as a promising platform for exploring exotic superconducting states such as the FFLO phase. The observed type‐II superconductivity highlights W2N as a possible material for both fundamental quantum materials research studies and the development of next‐generation superconducting technologies. Experimental Section W2N thin films were grown on c‐plane sapphire (W2N/Al2O3) and MgO (111) (W2N/MgO) substrates by reactive DC magnetron sputtering in an ultrahigh vacuum chamber [44]. Prior to deposition, both substrates were cleaned sequentially with a Hellmanex soap solution (3 min), deionized (DI) water (5 min × 2), and then sonicated in acetone (10 min) and ethanol (10 min) and were annealed at ∼ 800°C (in the deposition chamber) for 2 h. These wet cleaning steps are particularly important for MgO substrate to help remove surface hydroxides and carbonates [45]. The optimum deposition condition for obtaining W2N were a substrate temperature of ∼ 200°C, a deposition pressure of ∼ 0.32 Pa with a mixture of N2/Ar with a flow ratio of ∼ 41 sccm/ 18 sccm 70% N2 in the plasma, a target power of 44 W. The base pressure of the deposition chamber at deposition temperature was 2.4 × 10−9 Torr. Before depositing the final thick W2N film, several preliminary depositions were carried out on which structure and composition were analysed systematically. X‐Ray Photoelectron Spectroscopy (XPS) and X‐Ray Reflectivity (XRR) were performed on a thinner W2N film grown under identical deposition conditions as the samples presented in this manuscript to determine stoichiometry and deposition rate. XPS analyses were performed during the deposition conduction optimization on film of roughly 50 nm. The sample was transferred from the UHV deposition chamber to the XPS system with less than 3 min of atmospheric exposure to minimize contamination. XPS analyzes of W2N films were conducted in an Axis Ultra DLD instrument from Kratos Analytical (UK) with the base pressure lower than 1.1 × 10−9 Torr (1.5 × 10−7 Pa). Monochromatic Al Kα radiation (hν = 1486.6 eV) was used with the anode power set to ∼ 150 W, and the core level spectra W (4f) and N (1s) were recorded at normal emission angle. The analyzer pass energy was set at 20 eV, yielding a full width at half maximum of Ag 3d5/2 peak (∼ 0.55 eV) of Ag foil as a reference. To ensure accurate N/W quantification, samples were analyzed in the as received state, thus avoiding preferential N re‐sputtering by Ar+ ions [46]. The analysis area was 0.3 × 0.7 mm2. Spectrometer calibration was verified by measuring Au 4f7/2, Ag 3d5/2, and Cu 2p3/2 peak positions from sputter‐etched Au, Ag, and Cu samples and comparison to the recommended ISO standards for monochromatic Al Kα sources [47]. Analyses of XPS data were done using CASA XPS software for a simple quantification of the W/N ratio by applying, on the high resolution core level spectra, a Shirley background to retrieve the peak intensity and using their respective relative sensitivity factors. Further elemental composition analysis on the thicker film was measured by a combination of time‐of‐flight‐Elastic Recoil Detection analysis (ToF‐ERDA) and Rutherford Backscattering Spectrometry (RBS). The measurements were carried out using the Pelletron Tandem accelerator (5MV NEC‐5SDH‐2) [48]. The ToF‐ERDA measurements were conducted using 36 MeV primary iodine ion (127I8+) beam. The incident beam angle to the target surface normal was 67.5°, while the ToF‐telescope and the gas ionization detector were placed at 45° relative to the incident beam direction. The depth profile of the elemental composition was acquired from the ToF‐ERDA time and energy coincidence spectra using the Potku (version 2.2.4) code [49]. For RBS measurements, a 2 MeV He+ primary beam was used, incident at 5° to the sample surface normal and the backscattered ions were collected at 170° and the recorded spectra were analysed using SIMNRA (version 7.03) software [50]. The RBS measurements were performed after T ToF‐ERDA. X‐ray diffraction (XRD) measurements were performed on a PANalytical X'Pert PRO diffractometer in Bragg–Brentano (θ–2θ) geometry with a Cu Kα (λ = 1.540598 Å) radiation and Ni filter. The recorded 2θ range is 10–900 with a step size of 0.0080 and an equivalent time/step of 19 sec using the PIXcel 1D detector. Pole Figures were acquired with a polycapillary with a crossed slits (4 mm2) as primary optics and parallel plate collimator (0.18°) (phi steps size = 1° and chi step size = 1°). Reciprocal Space Maps (RSM) of the symmetric 111 peak and asymmetric 204 peak of W2N were acquired on the same type of diffractometer equipped with a hybrid mirror as primary optics and a PiXcel2D detector for fast acquisition with no optics for the receiving optics. The XRR was performed using x‐ray mirror with 1/32° divergence slit in primary and parallel plate collimator in secondary optics. All RSM measurements were performed after proper ω, 2θ, ψ alignment on the substrate. Symmetric and asymmetric reflections were used to determine the lattice geometry and extract the lattice parameters assuming a cubic W2N structure oriented along the (111) direction (a = b = c). The experimentally determined in‐plane and out‐of‐plane d‐spacings were then compared with the corresponding unstrained cubic reference values to evaluate the lattice distortion and strain state of the films. The low temperature electrical transport (2‐300 K) measurements were carried out using the physical property measurement system (PPMS, Quantum Design) equipped with a 14 T magnet. The temperature dependent magnetization measurements were carried out using an MPMS3 SQUID‐VSM magnetometer (Quantum Design make) in Zero‐Field‐Cooled (ZFC) and Field‐Cooled (FC) protocols. The samples were first cooled to the base temperature (2K) at zero magnetic field, after which 10 Oe field was applied and the magnetization was recorded. Subsequently, the sample was cooled in the applied field, and the magnetization was measured again during the warming cycle under the same field conditions. Author Contributions Aditya Singh: conceptualization, investigation, writing – original draft, methodology, validation, formal analysis, data curation. Arnaud le Febvrier: investigation, writing – review and editing, funding acquisition, validation, formal analysis, methodology. Sanath Kumar Honnali: investigation, writing – review and editing, methodology, formal analysis, validation, data curation. Abhishek and Subhankar: data curations, methodology, formal anlaysis, validation and writing – review editing. Grzegorz Greczynski: investigation, validation, methodology, writing – review and editing, formal analysis, data curation. Per Eklund: resources, project administration, writing – review and editing, conceptualization, investigation, funding acquisition, validation. Ajay Soni: conceptualization, investigation, funding acquisition, writing – review and editing, methodology, validation, supervision, resources, project administration, formal analysis, data curation. Conflicts of Interest The authors declare no conflicts of interest. Supporting information Supporting File: advs77576‐sup‐0001‐SuppMat.docx. Acknowledgements AS acknowledge IIT Mandi for research facilities and DST India for Indo‐Sweden bilateral grant (Grant Number. DST/INT/SWD/VR/P‐18/2019). P.E. acknowledges funding from the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University (Faculty Grant SFO‐Mat‐LiU No. 2009 00971), the Knut and Alice Wallenberg foundation through the Wallenberg Academy Fellows program (KAW‐2020.0196, P.E.), and the Swedish Research Council (VR) under Project Nos. 2021–03826 (P. E.), 2025–03680 (P. E.) and 2025–03760 (A. F.). A.S and SKH acknowledge Mauricio Sortica, Tandem Laboratory, Uppsala University for RBS and ERDA measurements. AM and SB thank the Department of Atomic Energy (DAE), Government of India and Chanakya post‐doctoral fellowship, i‐Hub quantum technology foundation (Sanction Order No. I‐HUB/PDF/2022‐23/04), for the financial support. Contributor Information Per Eklund, Email: per.eklund@kemi.uu.se. Ajay Soni, Email: ajay@iitmandi.ac.in. Data Availability Statement The data that support the findings of this study are available from the corresponding author upon reasonable request. References Associated Data Supplementary Materials Supporting File: advs77576‐sup‐0001‐SuppMat.docx. Data Availability Statement The data that support the findings of this study are available from the corresponding author upon reasonable request.