Facile and Fast Microwave-Assisted Synthesis of Metalated PCN-222 for Light-Driven Hydrogen Evolution Reaction Authors: Arash Ebrahimi, Stephen Nagaraju Myakala, Alexey Cherevan, Martin Motola, Dominik Eder Published: 2026 ABSTRACT Porphyrinic metal–organic frameworks (PMOFs) have the capacity to incorporate metalloporphyrins (MPs) into their structure. While this ability opens the door to many potential applications, the synthesis of metal-incorporated PMOFs typically involves multistep protocols, which have so far limited their exploration and scope. Providing a swift and universal synthesis route is an essential part of developing these porous materials for catalytic applications. Herein, Zr-PCN-222 and a broad series of its metalated derivatives (Pd, Zn, Ni, Cu, and Pb) were prepared by adopting a facile and rapid method based on a three-step microwave-assisted procedure. A variety of diffraction and spectroscopic techniques were used to characterize the PMOF compounds and confirm the incorporation of MP moieties into the frameworks, while their photocatalytic performance was systematically assessed in light-driven hydrogen evolution reaction (HER) experiments. We demonstrate that the highest performing Zr-PCN-222­(Pd) analogue exhibits HER activity under both UV- and visible-light illumination with activity levels comparable to those of previously reported benchmarks prepared using more tedious preparation protocols. Our results pave the way toward the exploration of a range of metal-incorporated PMOFs in applications where efficient charge separation and distinct optoelectronic properties are advantageous. Introduction Metal–organic frameworks (MOFs) are a multifunctional group of porous compounds composed of metal clusters/ions linked to polydentate organic linkers, resulting in a well-defined, crystalline structure. − Due to their chemical versatility, high surface areas, rigid skeletons, and tunable porosity, they have aroused widespread interest during the past decades, which makes them highly promising for a wide range of applications, including (photo)­catalysis, gas storage, separation, sensing, and energy conversion. − Highly symmetrical porphyrin ligands are naturally well known as large heterocyclic molecules. They typically contain four pyrrole subunits that can coordinate with metal ions (Fe, Zn, Cu, Ni, Mn, or other transition metals) to form metalloporphyrins (MPs). Porphyrinic MOFs (PMOFs) are a substantial subclass of MOFs built by incorporating MPs into their backbones to form a porous, crystalline network. By leveraging the useful redox-active and light emission/absorption properties of MPs, PMOFs have gained attention in energy harvesting, photocatalysis, and sensing. The photocatalytic hydrogen evolution reaction (HER) involves a process where hydrogen (H2) is generated from H2O by employing a photocatalyst activated upon absorption of UV or visible light photons. , This process is seen as an extremely sustainable way of green H2 production, which has influenced research on sustainability and solar fuel technologies over the past decades. , Among PMOFs, zirconium-based PMOFs (Zr-PMOFs) exhibit great thermal and chemical durability in comparison with other MOFs which often decompose under harsh reaction conditions, particularly in water and acidic or basic media. Porous coordination network (PCN), namely, PCN-222, is a part of the Zr-PMOFs family , and is built of meso-tetrakis­(4-carboxyphenyl)­porphyrin (TCPP) building units allowing for relatively large pores (3.7 nm) and adjustable pore environments. The presence of abundant coordination sites within the TCPP moieties of PCN-222 further provides an efficient synthetic platform for active catalytic site incorporation and manipulation. − Apart from having this role, the conjugated structure of TCPP is able to harness light efficiently within the photocatalytic process due to respective Soret and Q-absorption bands and shows a considerably longer lifetime of electron–hole photorecombination. , This unique property of porphyrinic units (acting as photosensitizers) leads to the generation of excited electrons and their transfer to a coordinated metal center (acting as catalytic sites), giving rise to efficient photocatalytic H2 generation. , Several studies have been executed to explore the photocatalytic performance of PMOFs ,− with a few works reporting their light-driven HER activity. The additional use of the porphyritic moiety to incorporate HER-active cocatalysts seems especially attractive for this application. Such metalated PMOFs allow us to explore the concept of single-atom catalysis, enable high structural control over the location and loading of the cocatalyst sites, and result in the proximity of light-absorbing and catalytic units, which is important to facilitate charge separation. The first demonstration of photocatalytic H2 production under visible-light irradiation using PCN-222 was, however, only realized in 2021 by incorporating different ratios of TCPP and TCPP­(Pt) into the framework. Follow-up works focused on the development of more complex composites and heterojunctions; − however, only little effort was dedicated to the optimization of the preparation protocols toward metalated PMOFs and their derivatives. As such, a series of Pt-loaded PCN-222­(Pt) was prepared using commercially available but expensive premetalized TCPP­(Pt) as a precursor. In further works, single-atom-loaded PCN-222-NH2(Pd) was fabricated using TCPP­(Pd) as a starting material, and a series of metalated CdS@PCN-222 composites was synthesized from corresponding MPs. Most recently, different transition-metal ions have been incorporated into PCN-222 by presynthesizing a range of TCPP­(M) complexes. One problematic issue with this approach is that the scope of commercially available TCPP­(M) MPs is rather limited, while typical procedures for PCN-222 metalation involve a long period of preparation including the fabrication of TPP-COOMe, its metalation, and hydrolysis to produce TCPP­(M). Often, these protocols demand the use of high temperatures and deleterious solvents while usually suffering from low product yields. ,, The focus of our work lies in the implementation of a rapid, microwave-based synthesis approach that makes metalated PMOFs readily available and facilitates their exploration, which we showcase here using the example of heterogeneous photocatalysis. Keeping these viewpoints in mind, in this contribution, we adopt a facile synthetic method where a three-step microwave-assisted procedure is used to generate a range of metalated PCN-222. We demonstrate the use of this PCN-222­(M) series (where M = Pd, Zn, Ni, Cu, and Pb) in light-driven H2 generation and show that the PCN-222­(Pd) member displays significant HER activity under both UV- and visible-light illumination, with an activity level similar to that of previously reported benchmark PMOFs. The results demonstrate that metal incorporation significantly influences photocatalytic performance, while postcatalytic characterization reveals that framework stability represents a critical factor governing long-term activity. This universal approach can be used for the synthesis of numerous metalated PMOFs and opens the door to diverse applications specifically in (photo)­catalysis, gas sorption, biomedicine, and energy storage materials. Previous studies have demonstrated the potential of metalated porphyrinic MOFs for photocatalytic hydrogen evolution. The objective of the present work is not to introduce a fundamentally new MOF topology but rather to provide a comparative assessment of different metal incorporations within the PCN-222 platform using a unified synthetic and photocatalytic framework. Consequently, in contrast to earlier attributed research works on porphyrinic MOFs for HER, this work provides a systematic comparison of multiple metalated PCN-222 materials (Pd, Ni, Zn, Cu, and Pb) synthesized under identical conditions. Particular emphasis is placed on correlating metal incorporation efficiency, photocatalytic activity, and reproducibility, which are important parameters for evaluating the practical applicability of these materials, while also highlighting the role of postcatalytic structural stability under photocatalytic conditions. Results and Discussion Synthesis The preparation of metal-free PCN-222 and its metalated derivatives was accomplished based on a modified procedure reported previously. The synthesis pathways and activation process are discussed thoroughly in the Electronic Supporting Information (ESI, Section S2). Briefly, the synthesis proceeds in three rapid microwave-assisted steps (Scheme a) in which the first and second steps yield Zr nodes (secondary building units (SBUs)) and MPs, respectively, by adding ZrOCl2 to 2-fluorobenzoic acid (2FBA) (ratio 1:25) and pouring MCl2 to TCCP (ratio 5:1), both in N,N-dimethylformamide (DMF). The respective solutions only require 5 min of heating at 140 and 175 °C, respectively, to complete the reaction. The third step, which forms PCN-222­(M), is conducted by mixing the as-gained suspensions of the first and the second steps followed by the addition of trifluoroacetic acid (TFA) in DMF; the resulting suspension is heated at 150 °C for 30 min to yield the desired PCN-222­(M). (a) Process Scheme Showing the 3 Steps for the Synthesis of PCN-222­(M) (M = H2, Pd, Zn, Ni, Cu, and Pb) with a Photograph Showing the Colors of the Final Products and (b) Crystal Structure of PCN-222­(M) Showing the Metalation Sites and the Pore Diameter Reported in the Literature aReprinted with some modifications with permission from ref . Copyright 2012, Wiley. Reprinted with some modifications with permission from ref . Copyright 2012, Wiley. Characterization The powder X-ray diffraction (PXRD) patterns of the as-synthesized PCN-222 and its metalated derivatives (Figure ) are consistent with those of PCN-222 reported in the literature, which confirms the success of the synthesis and metalation and demonstrates the high crystallinity of the PCN-222­(M) series. Characteristic diffraction reflections at 2θ = 2.5°, 4.9°, 6.98°, and 9.78° are correlated to the (100), (200), (201), and (400) crystal planes. Reflections located at 7.3° and 9.8° represent a hexagonal architecture characteristic of the PCN-222 compound. The observed variations in reflection intensities and peak shapes arise from differences in metal scattering factors, minor changes in crystallite size/preferred orientation, and subtle framework flexibility upon metal incorporation, which are common for porphyrinic MOFs and do not indicate phase transformation. − No additional diffraction reflections or amorphous features are detected, and the diagnostic hexagonal reflections are retained in all samples, confirming high crystallinity and phase purity. − PXRD of as-synthesized PCN-222­(M) (M = H2, Pd, Zn, Ni, Cu, and Pb). Total reflection X-ray fluorescence (TXRF) measurements corroborate the incorporation of M centers into the PCN-222 structure. Table S1 summarizes the expected and real Zr:M ratios and reveals a high degree of metal incorporation in the case of Ni, Cu, and Pd corresponding to 31%, 19%, and 100% of the maximum expected loading of each of the metals, respectively. In contrast, only marginal amounts of Zn (0.36%) and Pb (0.6%) were inserted. Scheme a and b shows digital photographs of the resulting PCN-222­(M) series and the nonmetalated PCN-222 benchmark revealing color changes and suggesting successful incorporation of metal cations inside the porphyrin moiety. Figure a shows the Fourier transform infrared (FTIR) spectra of PCN-222­(M) compounds along with the TCPP ligand (Figure S1) used as a precursor. The N–H stretching vibrations situated at ca. 3320 cm–1 (in the range of 3000–3500 cm–1, Figure S2a) correspond to its free pyrrole moieties which disappear after metalation (Figure b and Figure S2b). The stretching bands at around 1700 cm–1 can be assigned to the free carboxyl groups of TCPP (Figure S2c), whereas corresponding Zr-coordinated carboxylate bands in PCN-222­(M) are detected in the range of 1400–1600 cm–1 (Figure S2d). The Zr–O stretching peak at ca. 475 cm–1 signifies that Zr4+ was successfully linked to the −COOH functional group of TCPP while forming the framework. With respect to the M–N bond in the porphyrin core, a new sharp peak at ca. 1000 cm–1 in all PCN-222­(M) appears corresponding to the M–N stretching vibration mode of the MPs backbone (Figure c and d). These observations confirm the synthesis and isostructural nature of all PCN-222­(M) (for more clarifications, refer to Figure S2), whereas the exact position of the M–N vibration depends strongly on the type of incorporated metal, in line with the literature. (a) FTIR spectra of as-synthesized PCN-222­(M) (M = H2, Pd, Zn, Ni, Cu, and Pb), (b) the stretching vibrations of free N–H of PCN-222 and its disappearance after metalation in PCN-222­(M) (M = Pd, Ni, Cu, and Pb), and (c) and (d) IR vibrations of the TCPP linker and PCN-222­(H2) and the appearance of the M–N bond upon metalation, respectively. Upon metalation, the D 2h symmetry in PCN-222 changes to D 4h in PCN-222 (Pd, Ni) as can be seen from the Diffuse Reflectance Spectroscopy (DRS) spectra plotted in Figure . It indicates the alteration of PCN-222 possessing four Q-bands (515, 538, 590, and 646 nm; arising from a2u(π)–eg*­(π) transitions) into two Q-bands at around 525 and 550 nm for PCN-222­(Pd, Ni) by metalation. , The Soret (B) band of PCN-222 centered at 422 nm (electronic transitions of a1u(π)–eg*­(π)) changes negligibly and red-shifts slightly (5–10 nm) in PCN-222­(M). , In contrast, but also in line with the literature, the DRS spectra of PCN-222­(Pb) revealed that the four Q-bands of the neat PCN-222 stay largely intact. DRS absorbance spectra of PCN-222­(M) (M = H2, Pd, Ni, and Pb). Photocatalytic HER Performances Photocatalytic HER studies were performed by dispersing the catalyst powders in acetonitrile/water mixtures and using triethylamine (TEOA) as an electron scavenger (details in ESI, Section S3). The HER rates of PCN-222 (M) are summarized in Figure . PCN-222­(Zn, Ni, Pb) showed low but measurable H2 production after 3 h of light irradiation with a narrow-band UV source (365 nm), yielding 2.5, 0.5, and 2.9 μmol g–1 of H2, respectively (Figure a). While this low level of activity for PCN-222­(Zn) and PCN-222­(Pb) can be linked to the low incorporation degree of these metals, the performance of PCN-222­(Ni), where the metalation was successful, is likely an indicator of its intrinsically low activity. In contrast, nonmetalated PCN-222 and PCN-222­(Cu) generated no measurable H2 (Table S2), which can be related to the fast recombination of photogenerated electron–hole pairs in the parent PCN-222 , and the inability of Cu to cocatalyze HER under these conditions, respectively. HER activities of (a) as-fabricated PCN-222­(M) (M = Zn, Ni, Pb) and (b) PCN-222­(Pd) under UV- and visible-light illumination: left Y-axes show cumulative amounts of the generated H2; right Y-axes show the respective HER rate; highlighted area in (b) emphasizes that the HER rate of PCN-222­(Pd) obtained after the first illumination hour under UV- and visible-light is very close; for photocatalytic HER, the reactors were illuminated from the side by a narrow-band LED source centered at 365 nm (UV light, 271 mW/cm2) or 445 nm (visible light, 506 mW/cm2) (c) Recyclability experiments with the most active PCN-222­(Pd) analogue; recyclability experiments with the most active PCN-222­(Pd) analogue performed under 365 nm light (for detailed description, refer to Scheme S1 and Section S3). In comparison to the rest of the compounds, PCN-222­(Pd) displayed by far the highest HER rate generating 120.5 μmol g–1 of H2 after 3 h of illumination suggesting that the photoelectrons excited on the porphyrin moiety are able to effectively migrate to the Pd site and take part in the proton reduction reaction generating dihydrogen. This activity also goes in line with the high degree of Pd incorporation, highlighting the intrinsic affinity of the TCPP moiety to coordinate Pd2+(d8) in a square planar geometry. The H2 generation rates of all studied PCN-222­(Pd) photocatalysts are provided in Figure b and further summarized in Table S3. While no substantial photocatalytic activities employing narrow-band visible light illumination (445 nm) were witnessed with neat PCN-222 or other metalated PCN-222­(M) derivatives, PCN-222­(Pd) also yielded a substantial HER rate (24.1 μmol g–1) which was only 3–5 times lower compared to the rate obtained under UV illumination (Figure b). Calculated apparent quantum yield (AQY) values under visible- and UV-light illumination amount to 0.004 and 0.04%, respectively, which emphasize the potential of using metalated PMOFs in photocatalytic conversions driven by natural sunlight. It is worth noting that TEOA was used as a sacrificial electron donor to scavenge photogenerated holes and suppress charge recombination. Under the applied conditions, TEOA does not produce measurable hydrogen in the absence of a photocatalyst (Table S3), ensuring that the observed H2 evolution originates from photocatalytic processes involving the PCN-222-based materials rather than from photochemical decomposition of the sacrificial donor. Steady-state photoluminescence (PL) spectroscopy was applied to further rationalize the activity trend of PCN-222 (M). Figure shows that metalation of PCN-222 always leads to strong quenching of its main emissive peaks, whereas PCN-222­(Pb,Zn) only shows minor effects likely due to the low incorporation degree of the metals. Considering that both PCN-222­(Pb) and PCN-222­(Zn) still show HER activity, PL suggests rather efficient charge separation enabled at the Pb- and Zn-containing porphyrinic moieties. Steady-state photoluminescence spectra of the neat PCN-222 and its metalated analogs obtained at 410 nm excitation. In contrast to this, PCN-222 (Pd,Ni) both show very strong quenching behavior, resulting in 15–30 times lower recombination processes within their respective frameworks. This property yields an outstanding HER performance for the Pd analogue; however, contrary to expectations based on PL and successful metal incorporation, PCN-222­(Ni) is still quite inactive (Figure a), which we associate with the inability of Ni2+ to efficiently catalyze HER in its single-atom form. In line with this, recent literature indicates that PCN-222­(Ni) is active toward CO2 reduction rather than HER. A plausible photocatalytic pathway involves the excitation of the porphyrinic linker, followed by intersystem crossing and electron transfer to the metal centers, which act as catalytic sites for proton reduction. While this mechanism is supported by photoluminescence quenching and catalytic trends, it should be considered as a plausible interpretation based on indirect evidence. Photoluminescence measurements probe singlet excited states and are therefore not directly representative of the triplet states typically involved in photocatalytic processes. In this work, PL quenching is used as an indirect indicator of excited-state interactions between the linker and metal centers rather than as direct evidence of photocatalytic activity. Despite the limitations of PL spectroscopy for mechanistic assignment, a qualitative comparison of the PL and photocatalytic results remains informative. Both PCN-222­(Pd) and PCN-222­(Ni) exhibit substantial PL quenching, suggesting efficient excited-state interactions. However, their markedly different HER activities indicate that photocatalytic performance is not governed solely by charge separation efficiency. Instead, the intrinsic catalytic properties of the incorporated metal centers play a decisive role in determining the hydrogen evolution activity. We further benchmarked the performance of the best-performing PCN-222­(Pd) against physical mixtures of PCN-222 and Pd- or Pt-containing precursors (details in Table S3). First, photodeposited Pd/PCN-222 did not produce any H2, which suggests that the location of the Pd atom is important in the extraction and consumption of the photogenerated charges. In comparison to Pd nanoparticles deposited on the surface of PCN-222 particles, single Pd atoms incorporated inside light-absorbing porphyrinic moieties seem to be able to effectively use the photogenerated charge and complete the HER. Second, despite Pt being known as one of the most active HER cocatalysts, Pt/PCN-222 displays much lower photocatalytic HER rates (13-fold) compared to our PCN-222­(Pd), which further demonstrates the potential of PMOFs containing suitable catalytic centers in driving photocatalysis efficiently. We next assessed both the reproducibility of the synthesis and the photocatalytic performance by examining the PCN-222­(Pd) member of the family. Several batches of PCN-222­(Pd) were prepared on a single day, and the resulting products were analyzed with PXRD (Figure S3). The diffraction patterns match well with that of the first PCN-222­(Pd) described above, manifesting the general reliability of the synthetic process. All three batches were further tested toward their HER performance, and all were shown to be highly active with activity values deviating by 20% from the average (Table S4). While this result generally points to the reproducibility of the catalytic data, this high deviation value suggest that even small synthetic modifications along the 3-step synthesis procedure may result in a different degree of Pd atom incorporation and type. Whereas the aspect of MOF synthesis reproducibility is a matter of wider research, , Under UV irradiation, the exact photoinduced charge transfer pathway operating under the present reaction conditions cannot be conclusively established from the available data. Nevertheless, the observed photocatalytic activity is consistent with the excitation of the porphyrinic framework followed by charge separation and electron transfer to catalytically active Pd centers. Because transient spectroscopic techniques such as transient absorption spectroscopy were not employed in this study, the proposed mechanism should be regarded as a plausible interpretation based on the known photophysical behavior of porphyrinic materials rather than direct experimental proof. Apart from testing different batches, we also evaluated the long-term performance of the second PCN-222­(Pd) batch under light on–off cycles simulating day–night cycles (details in Figure c and ESI Section S3; Table S4). After each 3 h long illumination period, the reactor was opened and purged with Ar for 10 min; the illumination was continued over the following 3 h period. Regardless of retaining its macroscopic appearance (Figure S4c), PXRD and FTIR analyses (Figure S4a and S4b, respectively) show partial framework decomposition after photocatalysis, evidenced by linker-like vibrational features and loss of crystallinity. In particular, peak broadening and loss of long-range crystallinity in PXRD spectra have revealed that PCN-222­(Pd) underwent partial structural decomposition during photocatalytic HER. All of these are indicative of framework collapse and partial amorphization. Furthermore, the characteristic carboxylate coordination bands associated with the Zr-porphyrin framework in the FTIR spectra became broadened and shifted, while new bands resembling those of the free porphyrinic ligand emerged. The gradual decrease in hydrogen evolution activity observed during successive photocatalytic cycles appears to be closely associated with structural changes in the catalyst. Postcatalytic FTIR spectra revealed broadening and shifting of characteristic framework absorption bands, while PXRD patterns showed a noticeable reduction in diffraction reflection intensities and partial loss of crystallinity. These observations suggest partial degradation of the PCN-222­(Pd) framework under photocatalytic conditions. Since the porphyrinic linker and the coordinated Pd centers constitute the catalytically active architecture, disruption of the framework is expected to reduce the accessibility and effectiveness of active sites, thereby contributing to the progressive decline in the HER performance. PCN-222-type frameworks are generally stable in aqueous media due to the robustness of Zr–O coordination bonds. , However, under photocatalytic conditions, partial structural degradation is observed, as evidenced by FTIR and PXRD analyses. This suggests that while the framework remains stable in the dark, the combination of irradiation and reactive intermediates generated during the photocatalytic process leads to a gradual loss of crystallinity and partial linker dissociation. , Despite the fact that the exact trend is a matter of further investigation, this result shows that PCN-222­(Pd) generally exhibits high activity even after 12 h of illumination and does not show dramatic deactivation commonly observed in other photocatalytic MOFs. , Conclusion In summary, a swift microwave-based fabrication of metalated PCN-222 was successfully applied to prepare a series of its Pd-, Zn-, Ni-, Cu-, and Pb-containing derivatives. Several characterization methods were used for characterization: PXRD revealed the iso-reticular crystalline character of PCN-222­(M) analogs; FTIR, TXRF, and DRS confirmed successful metalation. The photocatalytic HER activities of PCN-222­(M) were tested under UV- and visible-light revealing minor HER activities for PCN-222­(Zn, Pb, Cu), whereas PCN-222­(Pd) demonstrated high H2 evolution rates reaching AQY values of 0.04. Following its strong absorption in the visible-light region, PCN-222­(Pd) could also deliver substantial activity under visible-light illumination. Steady-state PL results showed that the presence of Pd and Ni centers inside the porphyrin cores results in efficient charge separation and leads to a strongly suppressed radiative emission of the PMOF. While Ni sites stay inactive toward HER in PCN-222­(Ni), this efficient charge separation and the additional ability to catalytically promote H2 generation by Pd turned PCN-222­(Pb) into an active photocatalyst. It should be noted that steady-state photoluminescence measurements predominantly probe processes originating from singlet excited states and therefore do not directly monitor the long-lived triplet states that are typically involved in photocatalytic hydrogen evolution. Consequently, PL quenching is interpreted here only as evidence of excited-state interactions between the porphyrinic linker and incorporated metal centers. The PL data are not considered direct proof of the charge-transfer processes responsible for photocatalysis but rather provide complementary information regarding electronic communication within the framework. The robustness of the synthetic protocol and the photocatalytic performance of PCN-222­(Pd) were examined by producing multiple catalyst batches. The reusability of the best-performing PCN-222­(Pd) was tested by lengthy exposure of the catalyst to light (12 h; four successive cycles), displaying its sustained HER efficiency. This work advances the use of metal-incorporated PMOFs and paves the way for their further exploration. However, the hydrogen evolution rates obtained in this study are lower than those reported for some optimized porphyrinic MOF systems. Direct comparison between literature reports remains challenging because photocatalytic performance is highly dependent on experimental variables such as the irradiation source, sacrificial agent, catalyst loading, and reactor configuration. Therefore, the present work focuses primarily on relative activity trends among the investigated metalated PCN-222 materials under identical reaction conditions rather than on achieving maximum hydrogen productivity. Although the microwave-assisted synthesis of PCN-222-based materials has been previously reported, the present approach focuses on establishing a general and reproducible protocol for metal incorporation across different ions. The emphasis of this work is not on minimizing the number of synthetic steps but rather on enabling consistent comparison of metal-dependent properties within a unified synthetic framework. Furthermore, in the current work, microwave synthesis was employed as a rapid and reproducible route to prepare a series of metalated PCN-222 derivatives under comparable conditions. Accordingly, the focus of this study is placed on comparative catalytic evaluation and structure–performance relationships rather than on the development of a fundamentally new synthetic methodology. While the photocatalytic efficiencies remain moderate and the exact charge-transfer mechanism requires further investigation using advanced time-resolved spectroscopic techniques, the present study provides useful insights into the interplay among metal identity, framework integrity, and photocatalytic hydrogen evolution in porphyrinic MOFs. Future research lines will focus on further optimization of catalyst loading, light intensity, and reaction conditions that could significantly improve AQY values, catalytic efficiency, and stability under operating conditions. Supplementary Material