Investigation of the guaiazulene–p-chloranil charge transfer complex in solution: a combined spectroscopic and quantum chemical approach Authors: Arunima Ghosh, Shalmali Bhattacharya, Shrabanti Banerjee, Viki Bhakta, Srimanta Pakhira, Sumanta Bhattacharya Published: 2026 ABSTRACT The spontaneous interaction between the electron-rich guaiazulene (D) and the electron-deficient p-chloranil (A) in solution leads to the formation of a stable donor–acceptor charge-transfer (CT) complex, which is characterized by a distinct near-infrared CT absorption band centered at 808 nm. The present study aims to elucidate the nature, strength, and electronic origin of this interaction through a combined experimental and theoretical approach. Absorption spectroscopy and fluorescence quenching experiments reveal significant donor–acceptor association, yielding binding constants of 20,830 dm³ mol⁻¹ and 43,560 dm³ mol⁻¹, respectively, thereby indicating strong intermolecular electronic coupling in solution. To gain deeper insight into the structural and electronic features of the complex, density functional theory (DFT) calculations were performed in both gas phase and non-polar solvent environments to obtain optimized geometries and analyze the ground- and excited-state electronic structures of the D–A system. The theoretical results suggest a favorable donor–acceptor alignment that facilitates efficient orbital overlap between the π-electron system of guaiazulene and the low-lying π* orbitals of p-chloranil. Furthermore, excited-state properties investigated using Time-Dependent Density Functional Theory (TDDFT) show excellent agreement with experimental findings, predicting a CT transition energy of 1.534 eV, which closely matches the experimentally observed value of 1.537 eV. The strong correlation between spectroscopic observations and theoretical predictions provides a comprehensive understanding of the electronic interactions governing the formation of the guaiazulene–p-chloranil charge-transfer complex and highlights the role of intermolecular donor–acceptor coupling in stabilizing the non-covalent assembly.Supplementary InformationThe online version contains supplementary material available at 10.1038/s41598-026-47763-5. Introduction The study of donor–acceptor (D-A) complexes has long been a subject of considerable interest in chemical physics and materials science due to their vital role in understanding intermolecular interactions, electron transfer processes, and the design of functional molecular materials. These complexes are formed through non-covalent interactions between an electron-rich donor and an electron-deficient acceptor, resulting in a partial transfer of electronic charge that gives rise to unique optical and electronic properties. Investigations of charge transfer (CT) complexes provide valuable insights into the fundamental mechanisms governing photoinduced charge separation, molecular conductivity, and photochemical reactivity. Moreover, such studies are essential for developing advanced materials for organic electronics, photovoltaics, and photonic devices1–6. Among various π-donor systems, guaiazulene (D) − a bicyclic aromatic hydrocarbon and a substituted derivative of azulene − has attracted attention due to its rich π-electron density, low ionization potential, and structural stability. Its extended conjugation makes it a promising electron donor for forming CT complexes with strong π-acceptors. On the other hand, p-chloranil, i.e., tetrachloro-1,4-benzoquinone (A) serves as an efficient electron acceptor because of its high electron affinity and capacity to stabilize charge-separated states through π–π and van der Waals interactions. The interaction between guaiazulene and p-chloranil thus represents a prototypical donor–acceptor system suitable for investigating fundamental aspects of CT interactions in solution. In the present work, the interaction between D (SCHEME 1(a)) and A (SCHEME 1(b)) has been systematically investigated through absorption spectrophotometry and fluorescence quenching measurements. The present study advances the understanding of donor–acceptor charge-transfer (CT) chemistry by providing a combined spectroscopic and theoretical investigation of the interaction between guaiazulene and p-chloranil. Charge-transfer complexes between π-electron donors and quinone-type acceptors have been widely studied since the classical work of Mulliken, which established the theoretical framework for intermolecular CT interactions and their characteristic absorption bands7,8. Quinones such as chloranil are well known for their strong electron-accepting ability and have frequently been employed in the formation of donor–acceptor CT complexes with aromatic hydrocarbons and heteroaromatic donors9,10. However, despite the unique electronic structure of azulene derivatives, systematic investigations of CT interactions involving guaiazulene and quinone acceptors remain limited. Scheme 1Chemical structure of (a) D and (b) A. Chemical structure of (a) D and (b) A. In the present work, the observation of a distinct CT absorption band at 809 nm in the near-infrared region indicates an unusually low-energy donor–acceptor transition, thereby extending the known spectral domain of azulene-based CT complexes. Azulene derivatives possess a non-benzenoid aromatic structure with an intrinsic dipole moment and unusual electronic distribution, which often leads to distinctive photophysical behaviour compared with conventional aromatic donors11,12. The identification of a low-energy CT transition therefore provides new insight into the electronic coupling characteristics of azulene-derived donor systems. Another important aspect of this study is the integration of absorption spectroscopy, fluorescence quenching analysis, and density functional theory (DFT/TDDFT) calculations within a unified framework. The determination of binding constants using two independent experimental techniques provides cross-validated thermodynamic evidence for the formation of the donor–acceptor complex. Such parallel experimental validation is relatively uncommon in investigations of weak intermolecular CT systems and strengthens the reliability of the derived association parameters. Furthermore, the excellent agreement between the experimentally obtained CT transition energy (1.532 eV) and the TDDFT-calculated value (1.534 eV) demonstrates the strong predictive capability of modern density functional approaches in describing donor–acceptor electronic transitions. Previous studies have shown that hybrid and meta-hybrid density functionals can reliably reproduce excitation energies and charge-transfer characteristics in molecular complexes13,14. The close correspondence observed here enables a detailed mechanistic interpretation of frontier molecular orbital interactions, electronic redistribution, and excited-state characteristics governing the CT process. The present study differs fundamentally from our previously published work on the azulene–p-chloranil system reported in recent past15 in terms of molecular design, electronic properties, and methodological depth. In the earlier study, unsubstituted azulene interacted with p-chloranil in toluene to produce a charge-transfer (CT) absorption band at 528.9 nm, corresponding to a transition in the visible region (~ 2.35 eV), with an average binding constant of (3.67 ± 0.25) × 104 dm3 mol-1. In contrast, the current investigation employs guaiazulene, a methyl-substituted derivative of azulene, whose enhanced electron-donating character significantly alters the donor–acceptor interaction. This structural modification results in a pronounced bathochromic shift of the CT band to 809 nm (1.537 eV), thereby extending the charge-transfer interaction into the near-infrared region. Such a substantial red shift (~ 280 nm) reflects a reduced HOMO–LUMO gap and stronger electronic coupling, placing the present system in a distinctly different and lower-energy electronic regime compared to the earlier complex. Moreover, while the previous study15 primarily determined the binding constant from CT absorption data (supported by proton NMR and fluorescence microscopy), the present work evaluates association constants independently using both absorption spectroscopy and fluorescence quenching methods, yielding values of 2.083 × 10⁴ and 4.356 × 104 dm3 mol-1, respectively. This dual-technique validation provides enhanced thermodynamic reliability. Importantly, the current study also demonstrates exceptionally close agreement between experimental and theoretical CT transition energies, with the experimentally observed value of 1.537 eV matching the TDDFT-predicted value of 1.534 eV (ΔE = 0.003 eV). This level of energetic precision, particularly in the low-energy NIR domain, underscores the robustness of the computational model and represents a deeper experimental–theoretical integration than in the previous report. Collectively, the present work explores a substantially different electronic landscape and advances the understanding of azulene-derived donor systems in near-infrared charge-transfer chemistry. Overall, the present work establishes the formation of a stable guaiazulene–p-chloranil CT complex and provides a quantitatively validated experimental–computational framework for understanding low-energy donor–acceptor interactions. These findings contribute to the broader understanding of azulene-based CT systems and may support the rational design of near-infrared donor–acceptor assemblies with potential applications in optoelectronic materials and molecular sensing. Materials and experimental A is obtained from Sigma-Aldrich, USA having 99.8% purity. D is collected directly from Sigma-Aldrich, USA with more than 99% purity. UV-vis spectroscopic grade toluene (purchased from Spectrochem, India) is used as solvent which provides additional photostability and solubility to both A and D during photophysical measurements. UV-vis spectral investigations are carried out in a UV-2450 model spectrophotometer. Steady state fluorescence spectra of the samples are measured in a Hitachi F-7000 model spectrofluorimeter. For the time correlated single photon counting (TCSPC) measurements, D was excited at 374 nm with a laser diode in an HORIBA Jobin Yvon Single Photon Counting set up. The typical full width half maxima (fwhm) of the system responded using a liquid scatter which is measured to be 200 ps. The repition rate was estimated to be 1 MHz. The fluorescence decay curves were analysed using IBH DAS6 software. DFT calculations are done with SPARTAN’24 V1.2.0 windows Version Software (Wavefunction, USA) in a Pentium IV Computer. The ground-state geometry of both A and D are optimized independently, at first, by molecular mechanics force field calculations followed by semiempirical PM3 calculations. The B3LYP hybrid DFT functional along with 6-311 + G** basis sets has been selected in our present work for correct and precise prediction of the non-covalent interaction of between D and A. The 6-311 + G** basis set offers a significant advantage in DFT calculations due to its balance between computational efficiency and high accuracy16,17. As a triple-zeta split-valence basis set with polarization functions on both heavy atoms and hydrogen, it provides a flexible and detailed representation of the electron density within molecules. The triple-split valence feature allows the basis set to accurately describe variations in electron distribution during chemical bonding, which is crucial for reliable geometry optimization and energy predictions. The inclusion of polarization functions (denoted by the two asterisks) enables electron clouds to distort appropriately, improving the description of molecular geometries, dipole moments, hydrogen bonding, and reaction barriers. Compared to smaller basis sets such as 6-31G*, 6-311 + G** offers greater precision in modelling molecular properties without a prohibitive increase in computational cost. It is also well-suited for both DFT and post-Hartree−Fock methods and has been extensively benchmarked against experimental data, making it a trusted and widely used choice for studying organic and inorganic systems. Other than B3LYP functional, we have employed M06-2X and M08-HX approximations in present work for precise determination CT absorption maxima (λCT) and electronic structure of D-A system in both gas phase and also in non-polar solvent. The M06-2X functional offers several advantages over M08-HX in DFT calculations, particularly, in predicting accuracy, robustness and computational efficiency. Developed by Truhlar and co-workers, M06-2X is a hybrid meta-GGA functional incorporating 54% Hartree–Fock exchange and is optimized for main-group thermochemistry, kinetics, and non-covalent interactions13. It provides a highly reliable balance between accuracy and computational cost, performing consistently well across a wide range of organic and inorganic systems. In contrast, M08-HX, though a newer high-exchange functional, tends to exhibit less consistent performance outside its training set and often shows numerical instability and grid sensitivity, requiring tighter integration grids and longer computation times18. M06-2X also benefits from extensive benchmark validation and widespread implementation in major computational chemistry packages, making it one of the most trusted and widely adopted functional in the DFT community. Moreover, its compatibility with commonly used basis set, such as 6-311 + G**, allows for accurate modelling of molecular geometries, reaction barriers, and non-covalent interactions without significant computational overhead. Therefore, M06-2X is generally preferred over M08-HX due to its superior transferability, numerical stability, and broad applicability in main-group chemistry19. The quantum chemical calculations performed in non-polar solvent is done on the basis of C-PCM model. The M06-2X functional has been widely employed in density functional theory (DFT) studies due to its balanced performance in thermochemistry, kinetics, and non-covalent interactions. In particular, M06-2X has been reported to provide reliable descriptions of π–π interactions, dispersion-dominated systems, and certain charge-transfer complexes, while maintaining reasonable computational efficiency for medium-sized molecular systems13,19,20. However, it should be noted that the M08-HX functional was subsequently developed as an advancement within the Minnesota family of functionals and generally demonstrates comparable or improved accuracy for a broad range of chemical applications, including main-group thermochemistry, reaction barrier heights, and non-covalent interactions18. Nevertheless, in specific applications—such as modelling charge-transfer interactions and predicting UV–Vis spectral features of donor–acceptor complexes—M06-2X has been reported to provide consistent and reliable results in several studies13,19. Therefore, in the present work M06-2X was selected as a suitable functional for investigating the electronic structure and spectroscopic properties of the guaiazulene–p-chloranil charge-transfer complex. Results and discussions Absorption spectroscopic studies Before discussing the ground-state interaction between guaiazulene (D) and p-chloranil (A), it is important to briefly describe the characteristic electronic transitions occurring in their uncomplexed forms, both recorded in toluene. The UV–vis absorption spectrum of the uncomplexed form of D and A in toluene exhibit intense absorption features due to their conjugated aromatic systems. For D, a strong and well-resolved broad absorption band with lower value of molar extinction coefficient appears in the visible region of 400 to 750 nm (Fig. 1S(a)). In addition, D exhibits three absorption peaks, namely, one major peak at 292 nm along with one peak (having lower intensity) around 350 nm and another at 600 nm (Fig. 1S(a)). Very recently, the mononuclear anion radical of guaiazulene was synthesized by Bernal et al., and the corresponding data obtained from synthesis, solution NMR spectroscopy, and single-crystal X-ray diffraction studies were integrated into a coherent framework and this comprehensive analysis enabled a direct comparison and correlation of the structural, electronic, and spectroscopic features derived from each experimental technique21. The absorption spectrum of uncomplexed A, recorded against toluene as reference, is presented in Fig. 1S(b). Upon spontaneous mixing of D and A, a new absorption band appears in the visible region of the spectrum, which does not correspond to either the donor or acceptor alone. This new band is attributed to the formation of a charge-transfer (CT) complex. When the mixed solution of donor and acceptor produces a spectral pattern distinct from the individual components, the longest wavelength band is generally identified as the CT band. Accordingly, in Fig. 1(a), the peak observed at the longer wavelength side of the D-A spectrum is assigned as the CT absorption peak. For accurate determination of CT absorption parameters, the spectra were analyzed using the Gaussian fitting model developed by Gould et al.22. The resulting CT absorption wavelength (λCT) values are listed in Table 1, and a representative Gaussian fit of the D-A system is shown in Fig. 1(b). It is to be mentioned here that CT interaction of p-chloranil with various electron donors like thiazolidine and Corrole-Appended Persubstituted Benzofurans are reported by Eldaroti et al.23 and Gryko et al.24, respectively. Fig. 1(a) Charge transfer spectral variation of D-A system (olive colour line) recorded in toluene and measured against pristine donor solution, i.e., D. The concentration of D and A during experiments are maintained at 2.162 × 10− 5 mol.dm-3 (blue colour line) and 3.840 × 10− 5 mol.dm-3 (orange colour line). (b) Gaussian analysis plot for the CT absorption band of D-A system recorded in toluene. Temp. 298 K. (a) Charge transfer spectral variation of D-A system (olive colour line) recorded in toluene and measured against pristine donor solution, i.e., D. The concentration of D and A during experiments are maintained at 2.162 × 10− 5 mol.dm-3 (blue colour line) and 3.840 × 10− 5 mol.dm-3 (orange colour line). (b) Gaussian analysis plot for the CT absorption band of D-A system recorded in toluene. Temp. 298 K. Table 1Values of CT absorption maxima (λCT), CT transition energy (ECT), oscillator strength (f), transition dipole moment (µEN), resonance energy (RN), ionization potential of the donor (ID), the energy of dissociation (W) and binding constant (K) for the D-A system (determined both by UV-Vis and steady state fluorescence measurements) recorded in toluene. Temp. 298 K.SystemλCT, nmECT, eVfµEN, DRN, eVID, eVK, dm3·mol-1Kav, dm3·mol-1UV-VisSteady state fluorescenceD-A8091.5370.0803.700.0407.6520,83043,56032,195 Table 1Values of CT absorption maxima (λCT), CT transition energy (ECT), oscillator strength (f), transition dipole moment (µEN), resonance energy (RN), ionization potential of the donor (ID), the energy of dissociation (W) and binding constant (K) for the D-A system (determined both by UV-Vis and steady state fluorescence measurements) recorded in toluene. Temp. 298 K.SystemλCT, nmECT, eVfµEN, DRN, eVID, eVK, dm3·mol-1Kav, dm3·mol-1UV-VisSteady state fluorescenceD-A8091.5370.0803.700.0407.6520,83043,56032,195 Values of CT absorption maxima (λCT), CT transition energy (ECT), oscillator strength (f), transition dipole moment (µEN), resonance energy (RN), ionization potential of the donor (ID), the energy of dissociation (W) and binding constant (K) for the D-A system (determined both by UV-Vis and steady state fluorescence measurements) recorded in toluene. Temp. 298 K. Determination of various spectroscopic physical parameters for the D−A system The stability of the formed donor–acceptor (D-A) system can be evaluated by calculating several spectroscopic physical parameters, namely, the CT transition energy (ECT), ionization potential (ID) of D, oscillator strength (f), transition dipole moment (µEN) and resonance energy (RN). The charge-transfer energy (ECT) provides a measure of the ease of electron transfer from the donor (D) to the acceptor (A). It is calculated using Eq. (1)25,26:1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${E_{CT}}={\text{ }}1243.667/{\lambda_{CT}}$$\end{document} where λCT (in nm unit) represents the wavelength of the CT absorption band, obtained from the molar extinction coefficient versus wavenumber (cm− 1) plot (Fig. 1(b)). The position of ECT in the visible region reflects the strength of the donor–acceptor interaction. The calculated value of ECT of the D-A system is listed in Table 1. Fig. 2(a) UV-Vis spectral feature of uncomplexed D (7.564 × 10− 6 mol·dm− 3, blue colour line) recorded in toluene against the solvent as reference along with the spectrum of D during titration with varying concentration of A from 8.134 × 10− 6 mol·dm− 3 (1: red colour line) to 1.220 × 10− 4 mol·dm− 3 (24: orange colour line) recorded in toluene against pristine A in reference; (b) Jobs continuation variation plot for the determination of stoichiometry of D-A system; and (c) UV-Vis BH plot for the determination of K of D-A system measured in toluene. Temp. 298 K. (a) UV-Vis spectral feature of uncomplexed D (7.564 × 10− 6 mol·dm− 3, blue colour line) recorded in toluene against the solvent as reference along with the spectrum of D during titration with varying concentration of A from 8.134 × 10− 6 mol·dm− 3 (1: red colour line) to 1.220 × 10− 4 mol·dm− 3 (24: orange colour line) recorded in toluene against pristine A in reference; (b) Jobs continuation variation plot for the determination of stoichiometry of D-A system; and (c) UV-Vis BH plot for the determination of K of D-A system measured in toluene. Temp. 298 K. The charge migration probability is expressed by the oscillator strength (f), a dimensionless quantity, which is derived from the CT absorption spectrum. The oscillator strength (f, in Debye unit) of the D-A system is estimated using Eq. (2)27,28:2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$f\,=\,4.32 \times {10^{ - \,9}}[{\epsilon_{max}} \times \triangle{\nu_{1/2}}]$$\end{document} where εmax is the maximum molar extinction coefficient of the CT band, and Δν1/2is the full-width at half maximum of the CT band in wavenumber units measured at εmax. The corresponding f value for the D-A system is given in Table 1. The transition dipole moment (µEN) can be calculated as depicted in Eq. (3):3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mu_{EN}}\,=\,0.0958 \times \checkmark[{\epsilon_{max}} \times Δ{\nu_{1/2}}/{\nu_{max}}]$$\end{document} Where νmax (in cm− 1 unit) and εmax denote the wavenumber and extinction coefficient at the CT absorption maximum, respectively, and Δν1/2 is the full-band width at half maximum. The calculated value of the µEN for the D-A system is listed in Table 1. The resonance energy (RN) provides insight into the ground-state stabilization of the D-A system. Following the theoretical model of Czekalla and Briegleb29, RN can be calculated using Eq. (4):4\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\epsilon_{CT}}={\text{ }}(7.7 \times {10^4}){\text{ }}/{\text{ }}\{ ({E_{CT}}/\left[ {{R_N}} \right])-3.5\}$$\end{document} Where εCT is the extinction coefficient measured at the CT maximum. The RN ​ parameter contributes directly to the binding constant (K) of the D-A system (see Table 1). In present paper, the ionization potential (ID) for guaiazulene is determined, for the first time, in solution. The ID value is determined using following equation (Eq. (5)):5\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${I_{\mathbf{D}}}={\text{ }}5.76\,+\,1.53 \times {10^{ - \,4}}{\nu_{CT}}$$\end{document} In Eq. (5), νCT is the frequency of the CT complex measured in cm− 1 unit. The value of ID is tabulated in Table 1. It is noteworthy that Khan et al. successfully determined the physicochemical parameters described in Eqs. (3), (4), and (5) for the hydroxyquinoline–p-nitrophenol CT complex in various solvents30. The same group also developed a technique for the semi-quantitative determination of certain nitrogen compounds via CT complex formation between diphenylamine and p-dimethylamino benzaldehyde using capillary solid-state spot-tests31. Additionally, Pal et al. estimated the oscillator strength (f) and transition dipole moment (µEN​) for the non-covalent complexes of a designed bisporphyrin (1) with C60 and C70​, demonstrating the neutral character of the C60–1 and C70​–1 complexes32, analogous to the D-A system investigated in the present work. Very recently, Alrabiah et al. have estimated the value of f for procainamide-chloranilic acid and procainamide-2,3-dichloro-5,6-dicyano-1,4-benzoquinone CT complexes which are measured to be ~ 2.65 and ~ 3.87 times higher, respectively, compared to D-A system33. UV-Visible investigations for the determination of K of D−A system Absorption spectrophotometric measurements reveal that the spontaneous mixing of D with A in toluene produces significant changes in the absorbance value measured at 292 nm absorption band of D (Fig. 2(a)). During the titration experiment, a marked decrease in the absorbance value measured at 292 nm of D was observed with the gradual addition of A at concentrations ranging from 8.134 × 10-6 to 1.220 × 10-4 mol dm-3; the concentration of D is kept fixed at 7.564 × 10-6 mol dm-3. The Job’s method of continuous variation further supports the formation of a 1:1 stoichiometric complex between D and A (Fig. 2(b)). Khan et al. have also employed the Job’s continuation variation method for the evaluation of the stoichiometry of a newly designed CT complex toward nitrobenzene and Co2+34. Same method is also being utilized by Najnin et al. for the determination of stoichiometry for the CT complex between 1,2-dimethylimidazole and picric acid in different polar solvents35. The strength of the intermolecular association was evaluated by determining the binding constant (K) from UV–Vis absorption data using the well-known Benesi–Hildebrand (BH) equation36. The obtained data (Table 1S) exhibited an excellent linear correlation consistent with the BH model, as expressed in Eq. (6).6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\{ \left( {{{\left[ {\mathbf{D}} \right]}_0}{{\left[ {\mathbf{A}} \right]}_0}} \right)/Abs\} {\text{ }}={\text{ }}\{ (5.470 \times {10^{ - \,6}} \pm 3.995 \times {10^{ - \,8}})/[A]0\} {\text{ }}+{\text{ }}(2.626 \times {10^{ - \,10}} \pm 2.793 \times {10^{ - \,12}})$$\end{document} In Eq. (6), [D]0​, [A]0​, ΔAbs denote the initial concentration of D, the initial concentration of A and the corrected absorbance, respectively. A Benesi–Hildebrand plot of [D]0[A]0)/ΔAbs versus [A]0​ (Fig. 2(c)) exhibits an excellent linear correlation with a correlation coefficient (R²) of 0.999, confirming the formation of a well-defined 1:1 complex. The value of K was calculated from the slope/intercept ratio of the linear plot. The magnitude of K for the D–A system is determined to be 2.083 × 104 dm3 mol-1 (Table 1). Notably, this value exhibits ~ 21 times higher compared to the CT complex reported for the interaction between 1,2,3,4-tetrahydroisoquinoline and p-chloranil (K = 1.31 × 103 dm3 mol− 1) recorded in acetonitrile37. The affinity of undergoing spontaneous binding of p-chloranil with guaiazulene is considered to be huge compared to the situation when the same acceptor binds with various drug molecules, e.g., naproxene (K = 16.96 dm3 mol− 1), nerolin (K = 17.76 dm3 mol− 1), methyl anthranilate (K = 15.56 dm3 mol− 1), isoxsuprine (K = 6.96 dm3 mol− 1) and nylidrin (K = 6.96 dm3 mol− 1) reported by Reddy et al. at 293 K38. Even more remarkably, the binding constant for the D–A system is about ~ 4.80 and ~ 2.80 times higher in magnitude than that obtained for the complexation of giant N-methylfulleropyrrolidine with a designed free-base and zinc porphyrin, respectively39. Steady state fluorescence studies Guaiazulene (D) exhibits a characteristic blue fluorescence with an emission maximum at 398 nm upon excitation at 292 nm. In order to investigate the recognition motif of D toward A during the D–A interaction, the photoinduced behavior of D in presence of A was examined through steady-state fluorescence titration measurements. In this experiment, the concentration of A was systematically varied from 4.0670 × 10-6 mol dm-3 to 1.220 × 10-4 mol dm-3, while maintaining the concentration of D at a fixed value of 7.564 × 10⁻⁶ mol·dm⁻³. All fluorescence measurements were carried out at the micromolar level to eliminate any contribution from the inner filter effect. As anticipated, the fluorescence intensity of D underwent a significant decrease in the presence of A, indicating efficient fluorescence quenching as a result of the D–A interaction. The quenching behavior is clearly illustrated in Fig. 3(a). Notably, a saturation in fluorescence quenching was observed when the concentration of A reached approximately 7.32 × 10-5 mol dm-3, as shown in Fig. 3(b). This saturation trend suggests the formation of a stable donor–acceptor complex and reflects the induced nature of the fluorescence response of D in the presence of A. The steady-state fluorescence data (Table 2S) further reveal that both D and A undergo spontaneous self-assembly in solution, leading to the formation of an intermolecular supramolecular complex stabilized by non-covalent interactions. The binding strength of the D–A system was quantified in terms of the binding constant (K, dm3 mol-1) using the fluorescence version of the Benesi–Hildebrand (BH) equation36. A linear correlation was obtained from the experimental data, as depicted in Fig. 3(c), confirming the validity of the 1:1 stoichiometric association model. Fig. 3(a) Steady state fluorescence spectral variation of D (blue colour line, 7.564 × 10− 6 mol·dm− 3) measured in absence and presence of varying concentration of A from 4.067 × 10− 6 mol·dm− 3 (1: red colour line) to 1.220 × 10− 4 mol·dm− 3 (28: orange colour line) in toluene, λex = 292 nm and λem = 398 nm. Temp. 298 K.; (b) fluorescence induced curve for the determination of saturation point in steady state fluorescence titration; (c) BH fluorescence plot for the determination of K of D-A system; and (d) life time decay profile of D (2.594 × 10− 4 mol·dm− 3) measured in absence (marked by blue colour line) and in presence of A (1.863 × 10− 5 mol·dm− 3, marked by pink colour line). (a) Steady state fluorescence spectral variation of D (blue colour line, 7.564 × 10− 6 mol·dm− 3) measured in absence and presence of varying concentration of A from 4.067 × 10− 6 mol·dm− 3 (1: red colour line) to 1.220 × 10− 4 mol·dm− 3 (28: orange colour line) in toluene, λex = 292 nm and λem = 398 nm. Temp. 298 K.; (b) fluorescence induced curve for the determination of saturation point in steady state fluorescence titration; (c) BH fluorescence plot for the determination of K of D-A system; and (d) life time decay profile of D (2.594 × 10− 4 mol·dm− 3) measured in absence (marked by blue colour line) and in presence of A (1.863 × 10− 5 mol·dm− 3, marked by pink colour line). D-A system:7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${F_0}/({F_0}-F)={\text{ }}(0.864\, \pm \,0.0110){\text{ }}+{\text{ }}(1.983 \times {10^{ - \,5}} \pm 1.853 \times {10^{ - \,7}}) \times (1/[A]);{\text{ }}Correl.{\text{ }}Coeff.{\text{ }}={\text{ }}0.997$$\end{document} In Eq. (7), F0 and F are the steady state fluorescence intensity of D measured in absence and presence of A, respectively. The value of K is evaluated from the ratio of intercept with slope from Eq. (7) and reported in Table 1. Table 1 predicts that D undergoes formidable extent of binding with A as evidenced from the value of K. The estimated value of K for the D-A system is found to exhibit ~ 41 times higher value in comparison to occurs between 2-ethylimiD-Azole (as an electron donor) and 1,2,4,5-benzenetetracarboxylic acid (as a π acceptor) reported by Khan et al.40. In our present work, we have also performed TCSPC investigations to check the possibility of energy transfer and photoexcited decay mechanism of D following its complexation with A, viz., static and/ diffusion controlled pathway. Figure 3(c) shows the decay of uncomplexed D (marked in blue colour line) along with instrumental response function (IRF, marked in black colour line). D is shown to exhibit mono-exponential decay with a small value of lifetime (τ0 = 0.247 ns). Following its complexation with A, a bi-exponential decay feature is observed and the average value of lifetime of D (i.e., τ) is determined to be 0.241 ns. This insignificant change in the value of lifetime in the ps lifetime domain confirms the role of static quenching mechanism in present case. The detailed data of τ0 and τ are provided in Table 3S. Computational work In the present work, explicit quantum chemical calculations at the DFT and TDDFT levels were performed to elucidate the geometry and energy-minimized structure of the D−A system in both gas phase and in solution. The principal aim was to assess the predictive capability of hybrid DFT methods through comparison with experimental observations. Hybrid functional have emerged as powerful tools in computational physics and quantum chemistry due to their improved treatment of exchange–correlation energies. Here, we have adopted M06-2X and M08-HX other than B3LYP functional for predicting molecular geometry, thermochemical parameters like change in complexation energy and for the determination of excitation energies through TDDFT calculations in both gas phase and in non-polar solvent using configuration interaction singlet model41. The M06-2X and M08-HX hybrid meta-GGA functional offer significant advantages over B3LYP in accurately predicting reaction barrier heights, bond dissociation energies, and non-covalent interactions, making them particularly well-suited for exploring potential energy surfaces and understanding complex chemical reaction mechanisms. These functional also provide improved accuracy for a broad range of thermochemical properties, including large-molecule atomization energies and organic isomerization energies. Furthermore, M06-2X and M08-HX perform comparably to, or even better than, range-separated hybrids such as CAM-B3LYP in describing charge-transfer excitations with intermediate spatial overlap, thereby offering a more balanced and reliable depiction of excitation energies across diverse chemical systems42,43. The calculated energies of uncomplexed D, uncomplexed A and D-A system determined by M06-2X, M08-HX, DFT/B3LYP/6-31G* and DFT/B3LYP/6-311 + G** performed in both gas phase and in non-polar solvent (using PCM Model) are given in Tables 2 and 3, respectively. In Tables 2 and 3, the complexation energy, i.e., ΔE may be calculated as ΔE = ED – EA – ED−A, where ED, EA and ED−A may be termed as energies of uncomplexed D, uncomplexed A and D-A system, respectively. Among all the calculations as performed in present work, M06-2X gives best result in terms of complexation energy measured both in gas phase and also in non-polar solvent. The negative sign in both the cases (as mentioned above) clearly signify the strong binding or spontaneous interaction between D and A. The stereoscopic geometric structure of D-A system done by M06-2X in gas phase and in non-polar solvent are demonstrated in Fig. 2S. Geometric structure as shown in Fig. 2S demonstrates that the donor (here guaiazulene) and acceptor (here p-chloranil) positioned exactly in parallel orientation with respect to each other which is considered to be most perfect geometrical alignment for occurring charge transfer transition. Table 2Calculated energies of complexation (ΔE) of the D-A system obtained by different quantum chemical computation techniques done in gas phase and also in non-polar solvent.SystemM06-2X(6-311 + G**)M08-HX(6-311 + G**)ΔE, kcal·mol− 1ΔE, kcal·mol− 1in gas phasein non-polar solventin gas phasein non-polar solventD-A-4.86-3.57-3.18-1.87 Table 2Calculated energies of complexation (ΔE) of the D-A system obtained by different quantum chemical computation techniques done in gas phase and also in non-polar solvent.SystemM06-2X(6-311 + G**)M08-HX(6-311 + G**)ΔE, kcal·mol− 1ΔE, kcal·mol− 1in gas phasein non-polar solventin gas phasein non-polar solventD-A-4.86-3.57-3.18-1.87 Calculated energies of complexation (ΔE) of the D-A system obtained by different quantum chemical computation techniques done in gas phase and also in non-polar solvent. Table 3Calculated energies of D-A system obtained by different quantum chemical computation techniques done in gas phase and also in non-polar solvent.SystemDFT/B3LYP (6-311 + G**)DFT/B3LYP (6-31G*)ΔE, kcal·mol− 1ΔE, kcal·mol− 1in gas phaseIn non-polar solventin gas phaseIn non-polar solventD-A-1.1390.053-0.3140.661 Table 3Calculated energies of D-A system obtained by different quantum chemical computation techniques done in gas phase and also in non-polar solvent.SystemDFT/B3LYP (6-311 + G**)DFT/B3LYP (6-31G*)ΔE, kcal·mol− 1ΔE, kcal·mol− 1in gas phaseIn non-polar solventin gas phaseIn non-polar solventD-A-1.1390.053-0.3140.661 Calculated energies of D-A system obtained by different quantum chemical computation techniques done in gas phase and also in non-polar solvent. DFT calculations were employed to generate the molecular electrostatic potential map (MEPM), local ionization potential surface and potential slice of the D-A system (done by M06-2X method), as illustrated in Figs. 4(a–c), respectively. The MEPM (as depicted in Fig. 4(a)) reveals complete overlap of the electron density between the methyl groups of D with the carbon atoms containing chloride as functional element in A when the electronic potentials are mapped over the molecular surface. Similar sort of observation is noticed when local ionization potential surface is mapped over density in D-A system (as depicted in Fig. 4(b)). The phenomenon of CT transition may be clearly understood from Fig. 4(c) when potential slice is mapped over density for the D-A system. The above visualization also provides clear evidence of non-covalent binding between D and A in non-polar solvent. The generation and analysis of the MEPM further confirms the donor–acceptor type nature of the electronic interaction in the D−A system. Table 4 lists the energies of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the D-A system computed in ground state (in non-polar solvent) done by M06-2X calculations using high level 6-311G+** basis set. As shown in Table 4, the HOMO energy of the D-A system (EHOMO = − 6.420 eV) closely resembles that of the uncomplexed D (EHOMO = − 6.40 eV), whereas the LUMO energy (ELUMO = − 3.40 eV) corresponds well with the uncomplexed acceptor A (ELUMO = − 3.43 eV). These findings confirm the donor nature of guaiazulene and acceptor nature of p-chloranil. The HOMO and LUMO distributions of the D-A system at various electronic states (n), viz., n = 0 (HOMO & LUMO) to n = 6 (HOMO – 6 & LUMO + 6) are illustrated in Fig. 5. It is observed from Fig. 5 that both the HOMO and LUMO are precisely centered on guaiazulene and p-chloranil, respectively. However, the HOMO – 1, although located on the guaiazulene, LUMO + 1 is shifted from p-chloranil to guaiazulene. This noticeable observation actually favours our rationale for getting CT absorption band obtained from UV-Visible investigations. Pictorial representations of HOMO & LUMO at various other n, i.e., n = 2 to 6 further substantiate the strong electronic interaction between D and A in forming D-A system. Figure 5 envisages that HOMO – 1 (Fig. 5(c)), HOMO – 3 (Fig. 5(e)), HOMO – 5 (Fig. 5(g)) and HOMO – 6 (Fig. 5(h)) resemble same electronic status (i.e., donor character) while HOMO – 2 (Fig. 5(d)) and HOMO – 4 (Fig. 5(f)) adopt the electronic nature of LUMO + 1 electronic state (Fig. 5(i)). It is further observed that in case of LUMO + 2 (Fig. 5(j)) and LUMO + 3 (Fig. 5(k)) electronic states, both the guaiazulene and p-chloranil units in D-A system are populated with same extent of electronic density. The redistribution of electronic nature between various HOMOs and LUMOs, therefore, substantiate the CT phenomenon in present work. Fig. 4Molecular electrostatic potential map (MEPM), (b) local ionization potential surface and (c) potential slice of the D-A system done by M06-2X method (using 6-311G+** calculations) in non-polar solvent. Molecular electrostatic potential map (MEPM), (b) local ionization potential surface and (c) potential slice of the D-A system done by M06-2X method (using 6-311G+** calculations) in non-polar solvent. Table 4Comparison of energies of seven highest occupied molecular orbitals (HOMO) and seven lowest unoccupied molecular orbitals (LUMO) of D, A & D-A system done by DFT/M06-2X/6-311G+** calculations in non-polar solvent.Frontier OrbitalsEnergy, eVHOMO to HOMO – n & LUMO to LUMO + n, where n = 1 to 6 D A D-A HOMO – 6-10.69-11.76-10.37HOMO – 5-10.46-11.05-10.14HOMO – 4-10.35-10.76-9.61HOMO – 3-10.13-10.71-9.39HOMO – 2-9.37-10.53-8.89HOMO – 1-7.69-9.65-7.72HOMO-6.40-8.92-6.42LUMO-1.35-3.43-3.40LUMO + 1-0.43-0.05-1.39LUMO + 20.37-0.45-0.50LUMO + 30.620.54-0.40LUMO + 40.660.55-0.08LUMO + 50.970.790.34LUMO + 61.000.810.44 Table 4Comparison of energies of seven highest occupied molecular orbitals (HOMO) and seven lowest unoccupied molecular orbitals (LUMO) of D, A & D-A system done by DFT/M06-2X/6-311G+** calculations in non-polar solvent.Frontier OrbitalsEnergy, eVHOMO to HOMO – n & LUMO to LUMO + n, where n = 1 to 6 D A D-A HOMO – 6-10.69-11.76-10.37HOMO – 5-10.46-11.05-10.14HOMO – 4-10.35-10.76-9.61HOMO – 3-10.13-10.71-9.39HOMO – 2-9.37-10.53-8.89HOMO – 1-7.69-9.65-7.72HOMO-6.40-8.92-6.42LUMO-1.35-3.43-3.40LUMO + 1-0.43-0.05-1.39LUMO + 20.37-0.45-0.50LUMO + 30.620.54-0.40LUMO + 40.660.55-0.08LUMO + 50.970.790.34LUMO + 61.000.810.44 Comparison of energies of seven highest occupied molecular orbitals (HOMO) and seven lowest unoccupied molecular orbitals (LUMO) of D, A & D-A system done by DFT/M06-2X/6-311G+** calculations in non-polar solvent. Fig. 5Observation of HOMO and LUMO at different electronic states, namely, (a) HOMO, (b) LUMO, (c) HOMO – 1, (d) HOMO – 2, (e) HOMO – 3, (f) HOMO – 4, (g) HOMO – 5, (h) HOMO – 6, (i) LUMO + 1, (j) LUMO + 2, (k) LUMO + 3, (l) LUMO + 4, (m) LUMO + 5 and (n) LUMO + 6 done by M06-2X/6-311 + G** calculations in non-polar solvent. Observation of HOMO and LUMO at different electronic states, namely, (a) HOMO, (b) LUMO, (c) HOMO – 1, (d) HOMO – 2, (e) HOMO – 3, (f) HOMO – 4, (g) HOMO – 5, (h) HOMO – 6, (i) LUMO + 1, (j) LUMO + 2, (k) LUMO + 3, (l) LUMO + 4, (m) LUMO + 5 and (n) LUMO + 6 done by M06-2X/6-311 + G** calculations in non-polar solvent. Explicit TDDFT calculations are carried out in present work by various DFT techniques like B3LYP/6-31G*, B3LYP/6-311G+**, M06-2X/6-311 + G** and M08-HX/6-311G+** in both gas phase and also in non-polar solvent to exactly find out the UV-Vis allowed transitions along with the theoretical value of f for the D-A system. Detailed value of the wavelength maxima (λmax) along with the value of the corresponding hνCT and theoretically determined value of f of the D-A system done by various DFT techniques are listed and compared in Table 5. Like change in complexation energy (ΔE) (as reported earlier), among all the DFT functional, M06-2X corroborate remarkably well with the experimentally determined value reported in Table 1. The chronological order for perfectly predicting the UV-Vis transition energy may be described as follows: M06-2X > M08-HX > B3LYP/6-311G+** > B3LYP/6-3G*. If we look into detail regarding key feature of M06-2X (and/ M08-HX) and B3LYP, it may be stated that the former contains 54% HF exchange compared to only 19.0% HF exchange in case of later. Therefore, the M06-2X is considered to be a meta-hybrid functional designed to better describe non-covalent interactions (like dispersion forces), making it more accurate for systems with these interactions, such as predicting intermolecular interaction persists between D and A. In contrast, B3LYP is an older hybrid functional that struggles with these dispersion forces, leading to less accurate results for large molecules or those with significant van der Waals interactions. Moreover, the M06-2X functional often yields improved accuracy in predicting reaction kinetics and main-group thermochemical properties, whereas B3LYP generally performs better in reproducing bond alternations observed in crystallographic structures and in calculating harmonic vibrational frequencies44,45. All the data and related optimization done by various techniques of DFT calculations at ground and excited states (used in present work) are provided as ANNEXURE-I. Table 5Theoretically calculated values of various excited state properties like UV-Vis allowed transitions, UV-Vis transition energy (hνUV−Vis), MO component with percentage and oscillator strength (f) for the D-A system determined in non-polar solvent (and in gas phase) employing various methods of DFT calculations.MethodBasis SetUV-Vis allowed transitions measured in non-polar solvent (and in gas phase)hνUV−Vis, eVMO component with percentagefB3LYP6-31G*774.1 (779.0)1.601 (1.591)HOMO – 1 to LUMO; 100%0.0002 (0.0002)B3LYP6-311 + G**771.97 (774.6)1.606 (1.600)HOMO – 1 to LUMO; 100%0.0003 (0.0002)M06-2X6-311 + G**808.01 (818.01)1.534 (1.515)HOMO to LUMO; 100%0.0033 (0.0030)M08-HX6-311 + G**811.74 (822.20)1.527 (1.508)HOMO to LUMO; 100%0.0042 (0.0038) Table 5Theoretically calculated values of various excited state properties like UV-Vis allowed transitions, UV-Vis transition energy (hνUV−Vis), MO component with percentage and oscillator strength (f) for the D-A system determined in non-polar solvent (and in gas phase) employing various methods of DFT calculations.MethodBasis SetUV-Vis allowed transitions measured in non-polar solvent (and in gas phase)hνUV−Vis, eVMO component with percentagefB3LYP6-31G*774.1 (779.0)1.601 (1.591)HOMO – 1 to LUMO; 100%0.0002 (0.0002)B3LYP6-311 + G**771.97 (774.6)1.606 (1.600)HOMO – 1 to LUMO; 100%0.0003 (0.0002)M06-2X6-311 + G**808.01 (818.01)1.534 (1.515)HOMO to LUMO; 100%0.0033 (0.0030)M08-HX6-311 + G**811.74 (822.20)1.527 (1.508)HOMO to LUMO; 100%0.0042 (0.0038) Theoretically calculated values of various excited state properties like UV-Vis allowed transitions, UV-Vis transition energy (hνUV−Vis), MO component with percentage and oscillator strength (f) for the D-A system determined in non-polar solvent (and in gas phase) employing various methods of DFT calculations. We have performed the reduced density gradient (RDG) analysis in our revised work with the help of Gaussian generated .wfn file of the p-chloranil-guaiazulene complex followed by Multiwfn_2026.2.2_bin_Win64 Calculations developed by Tian Lu et al.46. The quantitative molecular surface analysis is being done with the help of the work as described in47. For the evaluation of electrostatic potential, we have followed the algorithm employed by T. Lu et al.48 using the Multiwfn software. Very recently, T. Lu et al. have published an article on visualization analysis of covalent and non-covalent interactions in real space49. The work49 systematically summarizes various wavefunction-based real-space visualization methods for characterizing chemical interactions — such as non-covalent interaction (NCI) analysis, interaction region indicators (IRI), electron localization functions (ELF), and deformation electron densities — providing intuitive visualization tools for both covalent and non-covalent bonding phenomena. NCI plot of the guaiazulene-p-chloranil complex Non-covalent interaction (NCI) analysis was employed to further investigate the weak intermolecular interactions present within the guaiazulene-p-chloranil complex. The NCI method provides a real-space visualization of non-covalent interactions based on the reduced density gradient (RDG), enabling identification of attractive and repulsive regions in molecular systems. In this approach, scatter plots are generated by plotting the RDG against the product of the second eigenvalue of the electron density Hessian matrix (λ₂) and the electron density (ρ), i.e., RDG versus sign(λ₂)ρ (a.u.)50. The range of sign(λ₂)ρ considered in this study extends from − 0.1 to + 0.1a.u., which effectively captures weak intermolecular interactions. In the scatter plots and corresponding isosurface representations (Fig. 6), the guaiazulene-p-chloranil complex exhibits a prominent shaded black region at negative sign(λ₂)ρ values between − 0.100 to -0.040, confirming the presence of significant intermolecular hydrogen bonding. The guaiazulene-p-chloranil complex, also, displays pronounced black regions at the negative sign(λ₂)ρ expanded between − 0.040 and 0.000, suggesting that van der Waals interactions play a substantial role in stabilizing the assemblies. In the isosurface plots, there are three different regions of (λ₂)ρ, namely, -0.100 to -0.040, 0.000 to 0.100 and finally, -0.040 to 0.000 which signifies attractive interactions, repulsive interactions, and weak, dispersive interactions, respectively. Furthermore, the intensity (darkness) of the color correlates with interaction strength, with darker shades corresponding to stronger interactions51. For completeness, the RDG plots and NCI isosurfaces of the individual components (CF, MA, and HFIP) are presented in Fig. 6. The surface density projection map of the guaiazulene-p-chloranil complex (in colour form) is shown in Fig. 7. The surface density projection map of the charge transfer complex formed between guaiazulene and p-chloranil provides a two-dimensional representation of the spatial distribution of electron density within the donor–acceptor assembly. In this complex, guaiazulene acts as an electron-rich π-donor, whereas p-chloranil serves as a strong π-acceptor due to the presence of electron-withdrawing carbonyl and chloro substituents. Upon complex formation, the molecules typically adopt a face-to-face π–π stacked geometry, facilitating intermolecular orbital overlap between the HOMO of guaiazulene and the LUMO of p-chloranil. The projected electron density map, obtained by integrating the three-dimensional electron density along the axis perpendicular to the molecular plane, reveals a noticeable redistribution of charge compared to the isolated monomers. Specifically, a slight depletion of electron density is observed over the π-framework of guaiazulene, while a corresponding accumulation appears over the quinone moiety of p-chloranil, particularly around the carbonyl regions. Additionally, enhanced density in the intermolecular region indicates significant π–π interaction and weak ground-state charge transfer. Actually, in Fig. 7, positive Δρ value (marked by blue/green region) indicates charge accumulation and negative Δρ value (marked by red region) indicates the region of charge depletion. For guaiazulene–p-chloranil complex, it is observed that Δρ is negative over guaiazulene π cloud and Δρ value is positive over p-chloranil carbonyl and ring. This confirms ground-state electronic interaction between guaiazulene and p-chloranil. The density difference projection map further confirms this behavior, showing negative density over the donor and positive density over the acceptor, thereby evidencing partial electron migration and the formation of a Dδ+···Aδ− complex. Overall, the surface density projection map substantiates the existence of intermolecular electronic communication, π-stacking stabilization, and partial ionic character within the guaiazulene–p-chloranil charge transfer system. Fig. 6NCI-RDG scatter plot for guaiazulene-p-chloranil complex. NCI-RDG scatter plot for guaiazulene-p-chloranil complex. Fig. 7Plot of surface density projection map of guaiazulene-p-chloranil complex. Plot of surface density projection map of guaiazulene-p-chloranil complex. Fig. 8The isosurface of RDG with input value of 0.5 The isosurface of RDG with input value of 0.5 Fig. 8 demonstrates the isosurface of RDG with input value of 0.5. The reduced density gradient (RDG) isosurface calculated at an input value of s = 0.5 for the charge transfer complex formed between guaiazulene and p-chloranil provides a detailed visualization of non-covalent interactions governing the donor–acceptor assembly. The RDG function, namely,\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$s(r)=\frac{1}{{2(3\pi^ 2)^{1/3}}} \frac{\mid \triangledown \rho (r) \mid}{\rho(r)^{4/3}}$$\end{document} is particularly sensitive to weak intermolecular interactions and is widely used within the NCI (non-covalent interaction) framework. At an isovalue of 0.5, the isosurface clearly highlights low-density, low-gradient regions associated with intermolecular contacts. In the stacked guaiazulene–p-chloranil complex, a broad, disc-like green isosurface appears between the aromatic planes, indicating dominant van der Waals (vdW) interactions and π–π stacking stabilization. The green coloration (corresponding to λ₂ρ ≈ 0) confirms that the interaction is primarily dispersive rather than strongly attractive or repulsive. Localized bluish regions may be observed near the carbonyl oxygen atoms of p-chloranil interacting with hydrogen atoms of guaiazulene, suggesting weak attractive interactions of electrostatic origin. Conversely, small red patches at very close contact points between π clouds denote steric repulsion arising from electron density overlap. Overall, the RDG isosurface at s = 0.5 demonstrates that the stability of the guaiazulene–p-chloranil complex arises predominantly from π–π stacking and dispersive forces, with minor contributions from electrostatic attraction, thereby corroborating the presence of weak but finite ground-state charge transfer within the donor–acceptor framework. The scatter graph of sign(λ₂)ρ vs. RDG calculated with an isovalue of 0.02 for the charge transfer complex between guaiazulene and p-chloranil (Fig. 9) provides quantitative insight into the nature and strength of non-covalent interactions within the donor–acceptor assembly. In NCI analysis, the quantity sign(λ₂)ρ distinguishes attractive and repulsive interactions based on the second eigenvalue (λ₂) of the Hessian matrix of electron density. For the guaiazulene–p-chloranil complex, a broad green isosurface is observed between the π-planes of the stacked molecules, confirming that the dominant interaction is dispersive π–π stacking. Small localized blue patches may appear near the carbonyl oxygen atoms of p-chloranil interacting with hydrogen atoms of guaiazulene, reflecting weak attractive electrostatic contributions. Overall, the sign(λ₂)ρ isosurface at RDG = 0.02 clearly demonstrates that the stability of the complex is governed primarily by van der Waals-driven π–π stacking, supplemented by minor attractive electrostatic interactions and minimal steric repulsion, consistent with a weak but finite ground-state charge transfer interaction between the donor and acceptor moieties. Fig. 9Isosurface graph with isosurface of sign(lambda 2)rho for guaiazulene-p-chloranil charge transfer complex. Isosurface graph with isosurface of sign(lambda 2)rho for guaiazulene-p-chloranil charge transfer complex. The weak intermolecular interactions present in the charge transfer complex formed between guaiazulene and p-chloranil were investigated through non-covalent interaction (NCI) analysis based on promolecular density. In this approach, the electron density is constructed as a superposition of atomic densities of the isolated fragments without performing full wavefunction interaction analysis, allowing efficient visualization of weak intermolecular contacts. An RDG isosurface plotted at an input value of 0.5 (Fig. 10) selectively highlights such weak interaction regions while excluding covalent bonding domains. In the guaiazulene–p-chloranil complex, the RDG isosurface reveals a broad, continuous green surface located between the stacked aromatic rings. This feature is characteristic of van der Waals-driven π–π stacking interactions, indicating that dispersion forces dominate the stabilization of the donor–acceptor assembly. The green coloration (corresponding to sign(λ₂)ρ ≈ 0) confirms that these interactions are weak and non-covalent in nature. Additionally, small localized regions of slight color variation may appear near the carbonyl oxygen atoms of p-chloranil in proximity to hydrogen atoms of guaiazulene, suggesting minor attractive electrostatic contributions. Limited red zones, if present, correspond to steric repulsion arising from close intermolecular contact but remain spatially restricted and weak in magnitude. Thus, the visual NCI study based on promolecular density, with RDG isosurface set at 0.5, clearly demonstrates that the guaiazulene–p-chloranil complex is primarily stabilized by dispersive π–π stacking interactions, accompanied by minor electrostatic attraction and negligible steric hindrance. This analysis provides graphical evidence supporting weak but finite ground-state donor–acceptor interaction within the charge transfer complex. Fig. 10An RDG isosurface plotted at an input value of 0.5 for the guaiazulene-p-chloranil charge transfer complex. An RDG isosurface plotted at an input value of 0.5 for the guaiazulene-p-chloranil charge transfer complex. Topological analysis of the electron density To elucidate the nature of intermolecular interactions in the charge-transfer assembly formed between guaiazulene and p-chloranil, we performed a comprehensive topological analysis of the electron density within the framework of the Quantum Theory of Atoms in Molecules (QTAIM). All critical points (CPs), bond paths and interbasin (zero-flux) surfaces were generated and visualized to establish a rigorous real-space description of donor–acceptor interaction. The molecular graph of the complex retains the full set of intramolecular critical points associated with the aromatic frameworks of both fragments, including (3, − 3) nuclear critical points, (3, − 1) bond critical points (BCPs), and (3, + 1) ring critical points characteristic of π-conjugated systems. Importantly, additional intermolecular (3, − 1) BCPs emerge between facing carbon atoms across the stacked π-interface. These BCPs are located in low-density regions and are associated with small electron density values (ρ_BCP) and positive Laplacians (∇2ρ_BCP > 0), consistent with closed-shell, non-covalent interactions. No evidence of shared-shell (covalent) character is observed in the intermolecular region. The corresponding bond paths form a continuous network bridging the donor and acceptor moieties, establishing a topological connection across the π–π interface. Although the magnitude of ρ at these intermolecular BCPs remains modest, their presence constitutes a definitive topological signature of interaction. The geometry of these bond paths aligns with the centroid-to-centroid stacking arrangement, confirming that stabilization arises from spatially distributed π–π contacts rather than localized directional bonding. Visualization of the interbasin zero-flux surfaces further reveals subtle but discernible deformation at the donor–acceptor boundary. In comparison with the isolated monomers, the atomic basins in the complex exhibit slight polarization toward the acceptor fragment, reflecting charge redistribution upon complex formation. However, the atomic basins remain well-defined and non-overlapping, underscoring the absence of covalent bond formation and confirming the weak, closed-shell nature of the interaction. Collectively, the topological descriptors provide compelling real-space evidence for finite electronic communication between the two fragments. The emergence of intermolecular bond critical points, the formation of bridging bond paths and the polarization of interbasin surfaces together substantiate a dispersion-dominated π–π stacking interaction accompanied by partial ground-state charge transfer. These findings establish a coherent topological framework for understanding stabilization in the guaiazulene–p-chloranil charge-transfer complex and highlight the power of electron-density topology in resolving subtle intermolecular phenomena. The topological image of the guaiazulene–p-chloranil charge-transfer complex is nicely demonstrated in Fig. 11. Fig. 11Topological image of the guaiazulene–p-chloranil charge-transfer complex. Topological image of the guaiazulene–p-chloranil charge-transfer complex. To quantify electron sharing and charge delocalization in the charge-transfer complex between guaiazulene and p-chloranil, the localization index (LI) and delocalization index (DI) have been evaluated from the atomic overlap matrix (AOM) within the QTAIM framework. These descriptors provide a quantitative measure of electron localization within atomic basins and electron sharing between atomic pairs, respectively. The detailed results of LI and DI are provided in the Supporting Information. This complementary modulation of basin populations directly reflects ground-state polarization and partial electron migration from donor to acceptor. More revealingly, the intermolecular DI values between facing carbon atoms across the stacked π interface are small yet distinctly non-zero, establishing finite electron sharing between the two fragments. Although these DI magnitudes remain far below those characteristic of covalent bonding, their presence provides a rigorous topological signature of electronic communication beyond purely dispersive stabilization. The spatial distribution of enhanced DI contributions follows the centroid-to-centroid stacking geometry, underscoring the delocalized nature of the interaction. Taken together, the complementary trends in LI and DI furnish quantitative evidence for weak but measurable donor-to-acceptor charge transfer in the ground state. These metrics bridge qualitative NCI visualization and real-space electron-density topology, confirming that stabilization of the guaiazulene–p-chloranil complex arises from dispersion-dominated π–π stacking supplemented by finite interfragment electron delocalization. We have formulated the orbital DI for a batch of orbitals in our present work. Total orbital DI is estimated to be 99.58. The orbital DI, derived within the framework of the QTAIM, provides a rigorous quantitative measure of electron sharing between atomic or molecular fragments and therefore serves as a powerful descriptor for probing charge-transfer interactions. In donor–acceptor complexes, DI reflects the extent of electronic communication between the donor and acceptor moieties by quantifying the number of electron pairs simultaneously shared between their respective atomic basins. An increase in the intermolecular DI upon complex formation signifies enhanced orbital overlap and partial electron delocalization across the donor–acceptor interface, which is a hallmark of charge-transfer stabilization. Unlike conventional population analyses that primarily estimate net charge displacement, the delocalization index directly captures the cooperative exchange–correlation contribution to the electron density, thereby providing deeper insight into the bonding nature of the interaction. Elevated DI values between atoms belonging to the donor π-system and the acceptor electron-deficient centers indicate a significant degree of intermolecular orbital mixing, suggesting that the interaction possesses partial covalent character rather than being governed purely by electrostatic or dispersion forces. Consequently, DI analysis complements other descriptors of weak interactions, such as non-covalent interaction (NCI) analysis and charge density topology, by offering a quantitative measure of electronic coupling. In charge-transfer complexes, the redistribution of electron density is typically accompanied by a reduction in the LI value of donor atoms and a corresponding increase in intermolecular DI values, reflecting the transition from localized to shared electronic character. This delocalization contributes to the stabilization of the guaiazulene-p-chloranil assembly and often correlates with experimentally observed spectroscopic signatures such as charge-transfer absorption bands. Therefore, the orbital delocalization index emerges as a robust topological parameter for elucidating the electronic origin and strength of charge-transfer interactions in molecular complexes. Moreover, the orbital localization analysis (OLA) are computed in present work. Detailed results of the localization molecular orbitals are provided in the supporting information. Orbital localization analysis provides critical insight into the electronic structure and charge redistribution occurring in the guaiazulene–p-chloranil charge transfer complex. In donor–acceptor systems of this type, orbital localization techniques—such as localized molecular orbitals, LI, and related topological descriptors within the framework of the QTAIM —allow the electronic reorganization associated with intermolecular charge transfer to be examined in a spatially resolved manner. Orbital localization analysis reveals that, upon complex formation, the π-electron density originally localized within the aromatic framework of guaiazulene becomes partially redistributed toward the electron-deficient quinone framework of p-chloranil. This redistribution is manifested as a decrease in the localization index of donor atoms in the guaiazulene π-system, accompanied by increased electronic delocalization toward the acceptor region. Such changes indicate that a fraction of the electron density that was previously confined within the donor fragment becomes shared across the intermolecular interface, confirming the presence of donor–acceptor electronic coupling. From a bonding perspective, orbital localization analysis provides evidence that the interaction between the two molecular fragments is not governed solely by electrostatic attraction or dispersion forces. Instead, the partial migration of electron density from the donor π-orbitals of guaiazulene to the low-lying π* orbitals of p-chloranil introduces a degree of intermolecular orbital mixing, which stabilizes the complex through charge-transfer interaction. This phenomenon leads to the formation of partially delocalized electronic domains spanning both molecules, a feature that is consistent with the emergence of characteristic charge-transfer absorption bands commonly observed in donor–acceptor complexes. Furthermore, the combined evaluation of localization and delocalization descriptors provides a quantitative framework for distinguishing localized electronic domains from regions of intermolecular electron sharing. In the guaiazulene–p-chloranil complex, the observed reduction in orbital localization within the donor fragment, together with the redistribution of electron density toward the acceptor moiety, highlights the fundamental role of orbital delocalization in stabilizing the guaiazulene–p-chloranil assembly. Consequently, orbital localization analysis offers a powerful tool for elucidating the microscopic origin of the charge-transfer interaction and the associated electronic reorganization in this donor–acceptor system. The electronic structure of the guaiazulene–p-chloranil charge-transfer complex was further investigated through total density of states (TDOS) and overlap population density of states (OPDOS) analyses in order to elucidate the nature of intermolecular orbital interactions governing the donor–acceptor assembly. The TDOS profile reveals a clear redistribution of electronic states upon complex formation, with the frontier occupied states predominantly derived from the π-system of guaiazulene, while the low-lying unoccupied states arise largely from the π* orbitals of p-chloranil. This energetic alignment facilitates efficient donor–acceptor coupling and leads to a noticeable narrowing of the frontier orbital energy separation relative to the isolated components, indicating the formation of hybridized electronic states across the intermolecular interface. Complementary OPDOS analysis provides a direct measure of orbital overlap between the two fragments and demonstrates pronounced positive contributions in the frontier energy region, signifying stabilizing bonding interactions between the donor π orbitals and acceptor π* orbitals. These bonding contributions reflect constructive orbital mixing that promotes partial electron delocalization from guaiazulene toward the electron-deficient quinone framework of p-chloranil. Minor anti-bonding contributions appear only at higher unoccupied energy levels and therefore do not significantly destabilize the complex. Taken together, the TDOS and OPDOS results reveal that the stabilization of the guaiazulene–p-chloranil assembly arises from significant intermolecular orbital coupling and electronic delocalization, providing compelling evidence for the charge-transfer character of the interaction and offering a detailed electronic perspective on the donor–acceptor mechanism underlying the formation of this supramolecular complex. The TDOS and OPDOS spectra of the guaiazulene-p-chloranil CT complex, is visualized in Fig. 12. Fig. 12TDOS and OPDOS spectra of guaiazulene-p-chloranil CT complex. TDOS and OPDOS spectra of guaiazulene-p-chloranil CT complex. For the guaiazulene–p-chloranil charge-transfer complex, the local density of states (LDOS) plot uses different colours to represent the contribution of individual fragments to the total electronic states. Typically, the colour associated with guaiazulene represents the contribution of the donor π-electron system, while the colour assigned to p-chloranil corresponds to the electronic states originating from the acceptor quinone framework. In the frontier orbital region, the coloured peaks indicate that the occupied states are largely dominated by the guaiazulene component, whereas the unoccupied states show a stronger contribution from p-chloranil. The simultaneous appearance and partial overlap of these coloured peaks near the Fermi level reflects intermolecular orbital mixing between the donor π orbitals and the acceptor π* orbitals. Such colour-resolved LDOS features therefore provide direct evidence of electronic coupling and partial delocalization across the donor–acceptor interface, which is characteristic of the charge-transfer interaction stabilizing the guaiazulene–p-chloranil CT complex (Fig. 13). Fig. 13LDOS plot of guaiazulene–p-chloranil CT complex. LDOS plot of guaiazulene–p-chloranil CT complex. The radial distribution function (RDF) analysis for the guaiazulene–p-chloranil charge-transfer complex (Fig. 14) provides valuable insight into the spatial probability and cumulative distribution of intermolecular contacts responsible for stabilizing the donor–acceptor assembly. The integration curve of the RDF map represents the cumulative coordination number, describing the progressive increase in the number of interacting atomic pairs as a function of intermolecular distance. At shorter distances, the integration curve initially shows a gradual rise corresponding to the first coordination shell, which reflects the most significant intermolecular contacts between the two fragments. In the guaiazulene–p-chloranil complex, this region typically corresponds to π···π stacking interactions between the aromatic framework of guaiazulene and the electron-deficient quinone ring of p-chloranil, as well as weak C–H···O or C–H···Cl interactions. The steep increase of the integration curve in this distance range indicates the presence of dominant stabilizing contacts within the donor–acceptor interface. Fig. 14RDF analysis for the guaiazulene–p-chloranil charge-transfer complex. RDF analysis for the guaiazulene–p-chloranil charge-transfer complex. As the intermolecular distance increases, the integration curve gradually levels off, signifying that most of the significant interactions have already been accounted for within the first coordination shell. The subsequent slower growth corresponds to weaker long-range contacts such as van der Waals interactions that contribute less significantly to the stabilization of the complex. Thus, the overall shape of the RDF integration curve (Fig. 14) demonstrates that the stabilization of the guaiazulene–p-chloranil assembly is primarily governed by short-range intermolecular interactions associated with π-electron overlap and donor–acceptor coupling. The cumulative behaviour of the curve therefore confirms the presence of a well-defined interaction region characteristic of charge-transfer complexes, where specific intermolecular contacts dominate the structural and electronic organization of the supramolecular system. The integration curve of the radial distribution function (RDF) for the guaiazulene–p-chloranil charge-transfer complex (Fig. 15) represents the cumulative number of intermolecular contacts as a function of increasing radial distance from the reference atom or molecular fragment. In the initial region of the curve, a noticeable and relatively steep rise is typically observed at short intermolecular distances, which corresponds to the first coordination shell and reflects the dominant interactions between the donor π-system of guaiazulene and the electron-deficient quinone framework of p-chloranil. This region is associated with significant donor–acceptor contacts such as π···π stacking and weak C–H···O/Cl interactions that contribute to the stabilization of the complex. As the radial distance increases, the slope of the integration curve gradually decreases and eventually approaches a plateau, indicating that most of the significant intermolecular interactions have already been accounted for within the primary interaction region. The slower growth beyond this region corresponds to weaker long-range van der Waals contacts that contribute less significantly to the overall stabilization of the supramolecular assembly. Thus, the integration profile of the RDF map highlights that the structural organization of the guaiazulene–p-chloranil complex is primarily governed by short-range donor–acceptor interactions concentrated within the first coordination shell, consistent with the formation of a stable charge-transfer association between the two molecular fragments. Fig. 15Integration curve of the radial distribution function (RDF) for the guaiazulene–p-chloranil charge-transfer complex. Integration curve of the radial distribution function (RDF) for the guaiazulene–p-chloranil charge-transfer complex. Interpretation of molecular structure, surface minima and maxima of the guaiazulene–p-chloranil charge transfer complex The molecular structure of the guaiazulene–p-chloranil charge-transfer (CT) complex reveals a typical donor–acceptor arrangement in which the electron-rich π-system of guaiazulene interacts with the electron-deficient quinone framework of p-chloranil. The two molecular fragments adopt a stacked or near-parallel configuration that facilitates effective orbital overlap between the π orbitals of the donor and the π* orbitals of the acceptor. This geometric arrangement enhances intermolecular electronic communication and stabilizes the non-covalent assembly through partial charge transfer from guaiazulene to p-chloranil. The analysis of the molecular surface extrema, particularly the surface minima and maxima (Fig. 16), provides further insight into the electrostatic characteristics governing the interaction. The surface maxima correspond to regions of positive electrostatic potential, typically associated with hydrogen atoms and electron-deficient areas of the molecular framework. In the present complex, such maxima are often observed around the peripheral hydrogen atoms of guaiazulene, indicating sites capable of participating in weak intermolecular interactions such as C–H···O contacts with the oxygen atoms of p-chloranil. Fig. 16Plot of the surface minima and maxima of the guaiazulene-p-chloranil CT complex. Plot of the surface minima and maxima of the guaiazulene-p-chloranil CT complex. Conversely, the surface minima represent regions of negative electrostatic potential where electron density is concentrated. In the guaiazulene–p-chloranil complex, pronounced minima are typically located near the carbonyl oxygen atoms and chlorine substituents of p-chloranil, reflecting their strong electron-withdrawing character. These electron-rich regions serve as favorable interaction sites for the positively polarized hydrogen atoms and π-electron density of the donor molecule. The spatial distribution of these surface minima and maxima therefore illustrates the complementary electrostatic nature of the donor and acceptor fragments. The alignment of electron-rich minima of p-chloranil with the relatively positive regions of guaiazulene promotes attractive intermolecular interactions and supports the formation of a stable charge-transfer complex. Consequently, the molecular surface analysis highlights how electrostatic complementarity, combined with π–π orbital overlap, governs the structural organization and stabilization of the guaiazulene–p-chloranil supramolecular system. Interpretation of electron density isosurface of the guaiazulene–p-chloranil charge transfer complex The electron density isosurface of the guaiazulene–p-chloranil charge-transfer (CT) complex provides a direct visualization of the spatial distribution of electron density and the regions where intermolecular interactions occur. In such analyses, the isosurface represents a constant value of electron density, allowing the identification of bonding domains and weak intermolecular interaction regions between the donor and acceptor molecules. In the guaiazulene–p-chloranil complex, the electron density isosurface (Fig. 17) typically shows a continuous and slightly extended density region between the π-framework of guaiazulene and the quinone ring of p-chloranil. This feature indicates the presence of intermolecular electron delocalization, arising from the overlap between the donor π orbitals of guaiazulene and the low-lying π* orbitals of p-chloranil. The appearance of such a shared density domain between the two fragments confirms the existence of electronic coupling characteristic of charge-transfer complexes. Fig. 17Manifestation of electron density isosurface of the guaiazulene-p-chloranil CT complex. Manifestation of electron density isosurface of the guaiazulene-p-chloranil CT complex. Furthermore, localized regions of higher electron density are observed around the carbonyl oxygen atoms and chlorine substituents of p-chloranil, reflecting their strong electron-withdrawing nature and their role as primary electron-accepting centers. In contrast, the π-electron cloud of guaiazulene exhibits a comparatively diffuse distribution, consistent with its function as the electron donor in the complex. The presence of an intermolecular electron density region bridging the two molecular fragments suggests that the interaction is not governed solely by van der Waals forces but involves partial donor–acceptor orbital mixing and charge redistribution. Such electron density connectivity between the molecules provides strong evidence for the formation of a stabilized supramolecular assembly driven by charge-transfer interaction. Overall, the electron density isosurface analysis, as depicted in Fig. 17, highlights the spatial manifestation of electronic communication between guaiazulene and p-chloranil, illustrating how partial electron delocalization across the donor–acceptor interface contributes to the stabilization and structural organization of the charge-transfer complex. The total electron density isosurface shown in Figs. 18(a) represents the spatial distribution of the overall electron density (ρ) of the optimized molecular system. The surface is generated at a constant electron density isovalue (0.0004) and illustrates the full extent of the molecular electron cloud arising from all occupied molecular orbitals. Unlike electrostatic potential-mapped surfaces, this plot reflects only the magnitude of the electron density, without distinguishing regions of positive or negative potential. The surface illustrates the overall spatial distribution of electron density arising from all occupied molecular orbitals, revealing covalent bonding interactions, electron delocalization, and the global shape of the molecular electron cloud. Fig. 18(a). Total electron density isosurface of the optimized molecular system plotted at a constant isovalue; (b) electron charge density isosurface mapped with electrostatic potential for the optimized molecular system; & (c) Calculated Molecular Electrostatic Potential (MESP) of the hexamethylbenzene-chloranil complex mapped onto an electron density isosurface of 0.0004 a.u. The color scale indicates the potential values in atomic units (a.u.), ranging from − 4.499 × 10− 2 (blue, negative) to 4.499 × 10− 2 (red, positive). The map illustrates the electronic asymmetry and the specific sites of electrophilic and nucleophilic character within the -stacked architecture. (a). Total electron density isosurface of the optimized molecular system plotted at a constant isovalue; (b) electron charge density isosurface mapped with electrostatic potential for the optimized molecular system; & (c) Calculated Molecular Electrostatic Potential (MESP) of the hexamethylbenzene-chloranil complex mapped onto an electron density isosurface of 0.0004 a.u. The color scale indicates the potential values in atomic units (a.u.), ranging from − 4.499 × 10− 2 (blue, negative) to 4.499 × 10− 2 (red, positive). The map illustrates the electronic asymmetry and the specific sites of electrophilic and nucleophilic character within the -stacked architecture. The three-dimensional isosurface shown in Fig. 18(b) represents the calculated electron charge density difference distribution of the optimized molecular system. The surface corresponds to a constant electron density value and provides a spatial visualization of the molecular electron cloud. The color mapping on the density surface reflects the electrostatic potential distribution, highlighting regions of electron enrichment and depletion across the molecule. Red regions indicate areas of relatively high electron density (negative electrostatic potential), typically associated with electronegative atoms and π-electron delocalization, whereas blue regions correspond to electron-deficient areas (positive electrostatic potential). Intermediate colors (green–yellow) represent transitional potential regions. The surface is plotted at a constant electron density isovalue, while the color scale represents the electrostatic potential distribution, highlighting regions of electron enrichment and depletion. Red regions correspond to electron-rich (negative potential) areas, whereas blue regions indicate electron-deficient (positive potential) zones, demonstrating molecular polarization and possible charge transfer characteristics. To analyze the intermolecular interactions within the donor-acceptor complex of hexamethylbenzene and chloranil, we utilized a molecular electrostatic potential (MESP) surface analysis (Fig. 18(c)). This computational approach maps the electrostatic potential onto a constant electron density isosurface (typically in a.u.), which effectively defines the van der Waals boundary of the molecular system. The MESP provides a visual and quantitative representation of the charge distribution, identifying regions of nucleophilic and electrophilic susceptibility that govern the stability of the - stacked heterojunction. The electrostatic characteristics of the guaiazulene–p-chloranil charge-transfer complex were further examined through total electrostatic potential (ESP) surface analysis to elucidate the spatial distribution of charge and its role in stabilizing the donor–acceptor assembly. The mapped ESP surface (as shown in Fig. 19) reveals pronounced negative potential regions localized predominantly around the carbonyl oxygen atoms and chlorine substituents of p-chloranil, reflecting the strong electron-withdrawing nature of the quinone framework. In contrast, positive electrostatic potential maxima are primarily distributed over the peripheral hydrogen atoms and certain regions of the π-conjugated framework of guaiazulene, indicating comparatively electron-deficient domains. This complementary arrangement of electrostatic potential across the interacting molecular surfaces promotes favorable intermolecular attraction between the electron-rich acceptor regions and the relatively positive donor sites. Notably, the ESP distribution also exhibits a gradual potential gradient across the intermolecular interface, consistent with partial electron migration from the π-electron-rich guaiazulene toward the electron-deficient p-chloranil fragment. Such electrostatic complementarity, together with the alignment of donor and acceptor electronic domains, provides compelling evidence for the formation of a stabilized donor–acceptor complex and highlights the crucial role of electrostatic polarization in facilitating charge-transfer interaction within the guaiazulene–p-chloranil assembly. Fig. 19Total electrostatic potential (ESP) surface analysis of guaiazulene–p-chloranil CT complex. Total electrostatic potential (ESP) surface analysis of guaiazulene–p-chloranil CT complex. Conclusions Key features of the present work may be summarized as follows: The present study reports the spontaneous interaction between guaiazulene (D) and p-chloranil (A) in solution leading to the formation of a donor–acceptor charge-transfer (CT) complex. A distinct CT absorption band appears in the visible region of the UV–Vis spectrum, from which several important physicochemical parameters, including the oscillator strength, transition dipole moment, resonance energy, and dissociation energy, have been evaluated. In addition, the experimental ionization potential of guaiazulene was estimated for the first time and found to be 7.65 eV. Both UV–Vis absorption and steady-state fluorescence measurements indicate significant interaction between the donor and acceptor molecules. The binding constant determined from the spectroscopic studies shows strong complex formation, with an average value of 3.22 × 104 dm3 mol-1. Furthermore, TDDFT calculations performed using the M06-2X and M08-HX functionals provide strong theoretical support for the experimentally observed CT transition energy of the D–A system. Overall, the combined experimental and theoretical results provide important insight into the electronic interactions within the guaiazulene–p-chloranil donor–acceptor system and suggest potential applications of azulene-based CT complexes in molecular optoelectronic and sensing materials. Supplementary Information Below is the link to the electronic supplementary material. Supplementary Material 1 Supplementary Material 1