Optoelectronic performance of diphenylamine-helicene derivatives as hole transport materials in perovskite solar cells: a DFT/TD-DFT study Authors: Shima Shabani, Rahim Ghadari Published: 2026 ABSTRACT AbstractAchieving high efficiency in perovskite solar cells depends critically on the design of small-molecule hole-transport materials (HTM), and leveraging theoretical design alongside in-depth structure–property analysis offers a cost-effective screening strategy. In this work, we employ DFT at the B3LYP/6-311G(d) and TD-DFT at CAM-B3LYP/6-311G(d) level to evaluate a series of helicene-based diphenylamine derivatives (the HEL family) as potential HTMs. Nine members with helicene-based structure, including unsubstituted structures as well as structures with substituents (F, Cl, Br, Methyl, Ketone, and Amine in the ortho position and Methyl and Amine in the meta position), show optimal HOMO/LUMO alignments for efficient hole extraction, while the others appear unsuitable. Their computed absorption peaks lie between 354.98 and 368.96 nm, making them compatible with n–i–p cell architectures. Among these, the structure that is containing amine functional group in meta position has the narrowest band gap (2.70 eV), the most red-shifted λmax (365.28 nm), and excited-state metrics (D = 0.93 Å, H = 4.66 Å, t = − 2.75 Å, Sr = 70) that signal excellent charge separation. Its transport and thermodynamic descriptors—net charge = 0.44 e⁻, hole contribution = 52.28%, Eb ≈ 0.46 eV, IPa = 5.34 eV, ΔGsol = − 0.59 eV, λhole = 0.298 eV, mobility parameter η = 2.35 eV—further underline its superior hole-generation ability, solubility, and low reorganization energy. Collectively, these characteristics identify that structure containing amine functional group in meta position can be regarded as a highly promising HTM for MAPbI₃-based n–i–p perovskite solar cells.Supplementary InformationThe online version contains supplementary material available at 10.1038/s41598-026-54954-7.Keywords: Perovskite solar cells, Helicene, Hole-transporting materials, DFTSubject terms: Chemistry, Materials science, Physics Introduction The global energy demand is on the rise, while the finite nature of fossil fuel reserves renders them an unsustainable option. Solar energy stands out as the most plentiful energy source, possessing the capability to fulfill worldwide energy requirements at a low cost and with minimal ecological repercussions. Perovskite-based photovoltaic devices have gained popularity by offering a set of attractive features: near-theoretical limits of photoelectric conversion efficiency, tunable band gaps, strong light harvesting capability, long carrier diffusion lengths, low-cost production routes, and simple prototyping1. Beyond these advantages, ongoing research is focused on improving long-term stability and reducing lead toxicity to pave the way for commercial deployment. The versatility of perovskite materials has attracted considerable interest, attributed to their diverse compositions, ease of fabrication, and a broad spectrum of desirable characteristics2–4. Since their 2009 debut, perovskite solar cells have quickly pushed power-conversion efficiencies beyond 25 percent, positioning them at the forefront of emerging photovoltaic technologies. Research today is concentrated on improving their long-term operational stability, identifying lead-free material systems, and developing scalable production methods that can translate laboratory achievements into market-ready products5. Halide perovskites used in photovoltaic devices follow an ABX₃ configuration, where A is an organic cation (such as methylammonium or formamidinium), B is typically a divalent metal ion like Pb2⁺, and X represents a halide anion (Cl⁻, Br⁻, or I⁻). A standard perovskite solar cell is built from three successive functional layers: an electron‐transport layer at the front, the central perovskite light‐absorbing film, and a hole‐transport layer at the rear2,6,7. When sunlight hits a perovskite, it excites electrons and holes to form bound pairs (excitons). Due to the small binding energy of perovskite excitons, they easily dissociate into free charge carriers, which produce an electric current8. Holes then migrate into the hole‐transport material (HTM) while electrons are funneled into the electron‐transport material (ETM). In the final step, each charge carrier is collected at its respective electrode9–11. Hole‐transport materials are responsible for capturing positive charge carriers from the perovskite layer and conveying them to the metal electrode12. In both n-i-p and p-i-n layouts, hole-transport materials are crucial for maintaining the stability and performance of perovskite solar cells. In the standard n-i-p design, they are especially valued for their straightforward synthesis and the ready availability of precursors. The best HTMs combine outstanding thermal and photochemical robustness with high hole mobility to accelerate charge transport and suppress recombination. Their HOMO level sits just above the perovskite’s valence band to ensure efficient hole extraction, while their LUMO lies well above the absorber’s conduction band to block electrons from reaching the gold counter-electrode7,13. Although strong adsorption is not essential for the effectiveness of HTMs, high solubility is beneficial for the formation of the layers. Durable planar HTMs exhibit intermolecular π-π interactions that enhance hole mobility and overall cell efficiency. To minimize recombination losses through the integration of structural units containing heteroatoms and to improve the interactions between perovskite and HTM, a successful approach is needed to create high-efficiency, impurity-free hole transport materials (HTMs)14,15. The HOMO energy in a molecule is dictated by π-electron distribution across its conjugated framework. Electron-releasing groups—such as alkyl chains or nonbonding lone pairs on nitrogen, oxygen, or sulfur—boost electron density through resonance or inductive influence, raising the HOMO level while lowering the ionization energy. In contrast, electron-attracting substituents like fluorine, cyano, or carbonyl units pull down the energies of both the HOMO and the LUMO, thereby enhancing electron affinity11,16. Changes in molecular properties such as mobility, energy levels, dipole moment and band gap can be achieved by substituting small functional groups or introducing heteroatoms5,12,17. A diverse range of hole-transporting materials has been developed, including small organic compounds, inorganic materials, and organic polymers, all of which have shown remarkable performance in perovskite solar cells (PSCs). In particular, helicene-derived semiconductor molecules, defined by their twisted π-surfaces, are promising due to their improved mobility resulting from larger molecular aggregation domains and multidimensional hole transport. Investigations of carbohelicene- and azahelicene–based hole-transport materials, aimed at producing low-cost, long-lasting perovskite solar cells, have demonstrated pronounced CH–π interactions in their crystal lattices and outstanding phase stability18. Previous investigations have confirmed that density functional theory offers a reliable and efficient approach for forecasting the structural configurations, electronic properties, and various other characteristics of conjugated systems4,19. DFT and TD-DFT in particular allows the evaluation of critical properties of materials without the need for experimental synthesis. Such predictive capabilities enable the design of materials with customized absorption characteristics, properly aligned electronic energy levels, and fine-tuned band gaps that facilitate efficient charge movement. Additionally, it is crucial to probe the mechanisms of hole transport and create advanced HTMs featuring superior hole mobility and elevated HOMO energies tailored for perovskite applications4,17. This study employs density functional theory at the B3LYP/6-311G level of theory to explore a series of small-molecule hole-transport materials tailored for perovskite photovoltaics. Each candidate features a helicene backbone adorned with diphenylamine moieties and is systematically modified at ortho and meta sites with substituents: F, Cl, Br, Me, CN, COOH, COMe, NH₂, and NO₂. Their structural, optical, and electronic attributes—in particular, their hole-shuttling capabilities—are characterized through both DFT and time-dependent DFT calculations. Excited-state (S₀→S₁) charge-transfer channels are mapped using the interfragment charge transfer (IFCT) approach, while electron–hole interaction analyses of the first excited state gauge separation efficiency. By merging these electron–hole metrics with IFCT findings, the work delivers deeper insight into HTM transport mechanisms and offers design principles for next-generation hole-transport materials4,20,21. Computational techniques The molecular structures of HTM were built and rendered in Avogadro and their electronic properties were evaluated by DFT and TD-DFT calculations in Gaussian 0922. Gas-phase optimization of the ground state geometries (S₀) for all compounds was performed using the widely accepted B3LYP functional and for UV–vis analyses, the CAM- B3LYP functional was used, both with the 6-311G(d) basis set23. Electron–hole distribution maps and the associated charge transfer matrix were generated using Multiwfn 3.8 for comprehensive wave function analysis24. The solvent environment was simulated using the Polarizable Continuum Model (PCM) with dichloromethane as the implicit solvent. Time-dependent DFT analysis in the gas phase was performed to capture the dynamics of the adsorption process25,26. DFT and TD-DFT calculations were performed at the B3LYP/6-311G(d) and CAM-B3LYP/6-311G(d) levels to extract a wide range of optical and electronic descriptors, including: Energy-level alignments Energy-level alignments Band gap energy (Egap) Band gap energy (Egap) Vertical excitation energy (Eex) Vertical excitation energy (Eex) Electron occupancy in frontier molecular orbitals Electron occupancy in frontier molecular orbitals Electrostatic reorganization energy (λEA) and total reorganization energy (λ) Electrostatic reorganization energy (λEA) and total reorganization energy (λ) Adiabatic ionization potential (IPa) Adiabatic ionization potential (IPa) Simulated absorption spectra and oscillator strengths Simulated absorption spectra and oscillator strengths Dominant molecular orbital transition assignments Dominant molecular orbital transition assignments Solvation free energy (ΔGsol) Solvation free energy (ΔGsol) Binding energy (Eb)25,27,28. Binding energy (Eb)25,27,28. Results and discussion Refined ground‐state geometries In each HTM design, the linkage of diphenylamine units to the helicene core produces two specific dihedral angles. The first angle, Φ1, spans from 120.6 to 129.8°—a deviation of 50.2° to 59.4° from perfect planarity—while the second, Φ2, lies between – 130.2 and – 142°, placing it 38° to 49.8° away from a straight 180° alignment. These significant twists result in an overall nonplanar configuration that disrupts uniform π–π stacking and reduces conjugation throughout the aromatic framework, thereby affecting the materials’ physical traits and electronic performance. Figure 1 shows the chemical structure of each HTM along with its calculated dihedral angles, and Fig. 2 shows the ground state geometries of HEL, HEL1, and HEL2 optimized by DFT at the B3LYP/6-311G(d) level18,29. The remaining structures are also shown in Fig. S1 (Table 1). Molecular structures of the hole‐transport materials examined in this study. The HTM geometries were refined through DFT calculations using the B3LYP functional paired with the 6-311G(d) basis set. Table 1Key parameters φ (°) extracted from the HTMs’ ground‐state geometries optimized at the B3LYP/6-311G(d) level.HTMsΦ1Φ2HEL122.9− 131.3HEL1124.9− 137.1HEL2122.5− 131.1HEL3126.5− 140.7HEL4123.1− 131.5HEL5126.4− 142.0HEL6124.1− 131.5HEL7125.8− 140.4HEL8122.8− 131.3HEL9124.2− 137.3HEL10123.5− 131.3HEL11120.6− 141.6HEL12123.2− 132.1HEL13129.8− 140.2HEL14123.9− 132.0HEL15124.0− 136.3HEL16121.5− 130.2HEL17129.7− 140.3HEL18123.6− 131.1 Key parameters φ (°) extracted from the HTMs’ ground‐state geometries optimized at the B3LYP/6-311G(d) level. Electronic properties of HTMs Hole‐transport materials are pivotal in setting the maximum performance of perovskite solar cells, directly shaping their efficiency ceiling. The precise energy levels of their frontier orbitals—HOMO and LUMO—play a decisive role in determining the overall device performance30. In the gas phase, DFT at the B3LYP/6-311G(d) level was used to calculate the HOMO and LUMO energies of each HTM and finally, using these obtained energies, the band gap (Egap) was obtained from the relationship (Egap = ELUMO−EHOMO); the complete data set is presented; the full data set is provided in Table S1. Previous results have demonstrated that HOMO values predicted by this computational setup correlate closely with experimental measurements, as expressed by the following formula31,32: In this work, the experimental LUMO level was obtained using the following expression30: In Eq. 2, the Eex stands for ELUMO-EHOMO, obtained from computational results. By applying Eqs. (1) and (2), the experimental HOMO and LUMO energy levels are extracted and summarized in Table 2; results are in terms of eV. Table 2Previously developed empirical formulas determine the energy levels of the frontier molecular orbitals of HTMs using the B3LYP/6-311G(d) level.Eex (eV)E*LUMO (eV)E*HOMO (eV)HTMs2.75− 2.61− 5.36HEL2.87− 2.51− 5.38HEL12.79− 2.69− 5.48HEL22.89− 2.52− 5.41HEL32.81− 2.72− 5.53HEL42.85− 2.53− 5.38HEL52.80− 2.72− 5.52HEL62.77− 2.55− 5.32HEL72.75− 2.56− 5.31HEL82.89− 2.62− 5.51HEL92.86− 2.84− 5.70HEL102.90− 2.68− 5.58HEL112.83− 2.71− 5.54HEL122.80− 2.58− 5.38HEL132.83− 2.61− 5.44HEL142.71− 2.67− 5.38HEL152.70− 2.57− 5.27HEL162.16− 3.37− 5.53HEL172.52− 3.20− 5.72HEL181.5− 3.93− 5.43MApbI33.2− 4− 7.2TiO2− 5.1Au Previously developed empirical formulas determine the energy levels of the frontier molecular orbitals of HTMs using the B3LYP/6-311G(d) level. The schematic illustrates that LUMO of MAPbI₃ lies above that of TiO₂, promoting rapid electron injection into the TiO₂ layer (Fig. 3)33,34. Table 2 compiles the HOMO and LUMO energies for HTMs bearing various R substituents on diphenylamine (DPA). For effective hole extraction, the HOMO of HTM must be positioned above the valence band of absorber35,36. The molecular structure of helicene-based diphenylamine derivatives tunes the HOMO–LUMO energy levels through both electronic and conformational effects. The electron-donating diphenylamine units mainly raise the HOMO level, while the twisted helicene backbone modulates π-conjugation and fine-tunes orbital energies. This allows better energetic alignment between the HOMO of the hole transport material and the Valence Band Maximum of MAPbI3, reducing the hole-injection barrier and facilitating efficient hole extraction. In addition, substituent further adjust the frontier orbitals, improving interfacial charge transfer and suppressing recombination37. The valence and conduction bands of MAPbI₃ are reported at − 5.43 eV and − 3.93 eV, respectively38. Notably, several HTMs (HEL, HEL1, HEL3, HEL5, HEL7, HEL8, HEL13, HEL15, and HEL16) exhibit HOMO levels higher than MAPbI₃. Among them, HEL16—featuring a potent electron-donating group at the DPA meta-position—achieves the highest HOMO energy of − 5.27 eV35,39. An electron-donating amine at meta position of DFA elevates the HOMO level, strengthening its ability to pull holes from the perovskite layer. HEL3, which bears a chlorine substituent, showcases one of the lowest HOMO energies at –5.41 eV. Placing Cl at the ortho site withdraws electron density through an inductive effect, deepening the HOMO, which in turn boosts oxidative resilience but can hinder hole extraction due to a wider energy gap with the perovskite’s valence band. As a result, both the unsubstituted HEL and the ortho-substituted variants (HEL1, HEL3, HEL5, HEL7, HEL13, HEL15) featuring F, Cl, Br, CH₃, COOR, and NH₂ groups—as well as the meta-substituted HEL8 and HEL16 (CH₃ and NH₂)—all align favorably with MAPbI₃. This optimal alignment promotes rapid hole injection from the absorber into the HTM28,40,41. Among the HTMs bearing meta-position substituents (HEL2, HEL4, HEL6, HEL10, HEL12, HEL14, HEL18) and those with ortho-position CN, COOH, or NO₂ groups (HEL9, HEL11, HEL17), the HOMO resides below valence band of MAPbI₃, rendering them ineffective as hole transport layers42. Ensuring an LUMO of HTM sits above the perovskite conduction band is equally vital to block electron flow toward the counter electrode and curb charge recombination28,43. In this work, every HTM meets that condition, with their LUMO energies ranked as follows: HEL1 (-2.51eV) > HEL3 (-2.52 eV) > HEL5 (-2.53 eV) > HEL7 (-2.55 eV) > HEL8 (-2.56 eV) > HEL16 (-2.57 eV) > HEL13 (-2.58 eV) > HEL and HEL14 (-2.61eV) > HEL9 (-2.62 eV) > HEL15 (-2.67 eV) > HEL11 (-2.68 eV) > HEL2 (-2.69 eV) > HEL12 (-2.71 eV) > HEL4 and HEL6 (-2.72 eV) > HEL19 (-2.84 eV) > HEL18 (-3.20 eV) > HEL17 (-3.37 eV). ortho-fluoro substitution increases the LUMO level due to its inductive withdrawing effect, reducing electron affinity and ortho-nitro substitution stabilizes the LUMO through both inductive and mesomeric withdrawing effects, resulting in a deeper LUMO. Therefore, all HTMs can prevent the return of electrons44. Comparison of the HOMO energy levels in HTMs shows that all HTMs except HEL7 and HEL8, which have CH3 substitutions in the ortho and meta positions, and HEL16, which has NH2 substitution in the meta position, have lower HOMOs than the HEL HOMO (base structure). Seven HEL derivatives (HEL1, HEL3, HEL5, HEL7, HEL8, HEL13, HEL16), each bearing an ortho substituent (F, Cl, Br, CH₃, or COR) plus a meta CH₃ or NH₂ group, display LUMO energies that exceed that of the parent HEL. In contrast, ten analogues (HEL2, HEL4, HEL6, HEL9, HEL10, HEL11, HEL12, HEL15, HEL17, HEL18) featuring electron-withdrawing CN, COOH, NH₂, or NO₂ at ortho positions and/or F, Cl, Br, CN, COOH, or NO₂ at meta sites show LUMO levels below HEL. HEL14, with only a meta-COR substituent, exactly matches the original LUMO energy of HEL. These modifications also manifest in the optical band gaps: stronger donor–acceptor interactions shrink the gap, whereas weaker interactions expand it45,46. Table 2 illustrates the Egap values of HTMs. The energy gap values of the hole transport materials (HTMs) are ranked as follows: HEL17 (2.16 eV) < HEL18 (2.52 eV) < HEL16 (2.70 eV) < HEL15 (2.71 eV) < HEL8 ~ HEL (2.75 eV) < HEL7 (2.77 eV) < HEL2 (2.79 eV) < HEL6 ~ HEL13 (2.80 eV) < HEL4 (2.81 eV) < HEL12 ~ HEL14 (2.83 eV) < HEL5 (2.85 eV) < HEL10 (2.86 eV) < HEL1 (2.87 eV) < HEL3 ~ HEL9 (2.89 eV) < HEL11 (2.90 eV). Ortho-carboxyl substitution leads to a wider band gap due to its moderate electron-withdrawing/donating balance, resulting in a blue-shifted absorption. In contrast, ortho-nitro substitution strongly stabilizes the LUMO and deepens the HOMO, thus narrowing the band gap and causing red-shifted absorption. The reduced band gap indicates increased electron delocalization and stronger intramolecular charge transfer (ICT) property. The lower band gap facilitates electron excitation and charge migration, which can improve the hole transport efficiency. In addition, the red-shifted absorption behavior broadens the optical response of the HTM material47. The data show that, relative to HEL, the band gaps of HEL1–HEL7 and HEL9–HEL14 are larger, whereas HEL15, HEL16, HEL17, and HEL18 exhibit smaller band gaps. Notably, HEL and HEL8 both possess a band gap of 2.75 eV48. Graphical representation of the relative energy levels of TiO₂, MAPbI₃, HTMs, and Au32. Electron distributions across all nineteen HTMs were examined via DFT calculations performed in Gaussian 09, utilizing the B3LYP functional paired with the 6-311G(d) basis set.49. Figure 4 shows a summary of the electron density distribution in each HOMO and LUMO of the HTMs HEL, HEL1, and HEL2, and is specified for the remaining structures in Fig. S2. In all cases, the HOMO is chiefly confined to the diphenylamine units—bearing substituents such as F, Cl, Br, CH₃, CN, COOH, COR, NH₂, and NO₂—thanks to the powerful electron-donating effect of amine, and to portions of the dithiahelicene framework. This pattern highlights those regions as the primary sites for hole donation and transport. Conversely, the LUMO is almost exclusively located on the dithiahelicene ring, whose extensive π-conjugation and electron-accepting nature make it pivotal for electron capture and the separation of charge. With the exception of structures HEL17 and HEL18, in which the LUMO is absent on the dithialicene ring and instead is concentrated solely on one of the diphenylamine rings. This observation arises from the strong electron-attracting nitro group influence, transmitted through both resonance and inductive pathways. Analysis of the electron density maps reveals that the HOMO is more extensively delocalized than the LUMO, indicating that these HTMs deliver superior hole‐transport efficiency compared with their electron‐transport performance28. Thus, extensive HOMO delocalization facilitates efficient hole migration. Moreover, frontier orbital evaluations of all nineteen HTMs confirm their strong hole‐transport capabilities, affirming their promise for integration into perovskite solar cells28,50,51. HOMO/LUMO orbital isosurfaces related to the selected HTMs calculated at B3LYP/6-311G(d) level of theory. The orange and purple regions represent the positive and negative phases of the molecular orbital wave function, respectively. The HOMO/LUMO isosurfaces of remaining structures have been provided in SI. Absorption spectrum of the engineered HTMs Time-dependent TD-DFT calculations in the gas phase were performed at the CAM-B3LYP/6-311G(d) level of theory to characterize the optical properties of compounds. because it provides a more accurate description of the long-range charge-transfer interactions that are important in helicene-based hole-transport materials and it leads to more accurate electronic and optical predictions25,52. Table 3 compiles the principal photophysical metrics for each HTM, listing vertical excitation energies (Eex), oscillator strengths (f), absorption maxima (λmax), light-harvesting efficiencies (LHE), and the dominant molecular orbital (MO) transitions responsible for the key absorption bands14. The optical absorption of MAPbI3 is in the range of 550–800 nm53–55. To prevent competition in light absorption with the perovskite solar cells (PSCs), it is generally advantageous for the absorption spectrum of hole transport materials (HTMs) to be concentrated within the 400 nm range53. Optical analysis of the synthesized HTMs shows that their absorption maximum is in the range of 351.49–368.96 nm and does not interfere with the absorption band of MAPbI356. The ultraviolet absorption of helicene-based HTMs minimizes the spectral overlap with the perovskite absorber, which is beneficial for efficient light harvesting in n-i-p perovskite solar cells. Consequently, this factor makes them suitable as hole-transporting materials in conventional n-i-p perovskite solar cells28,57. The absorption λmax of HEL7, HEL8, HEL15 and HEL16 is higher than that of HEL (3.46, 0.49, 5.57 and 1.89 nm, respectively). In contrast, the absorption λmax of HTMs (HEL1-HEL6, HEL9-HEL14 and HEL17-HEL18) shows a decrease compared to the absorption λmax of HEL (8.41, 4.03, 6.64, 5.22, 5.59, 4.74, 7.07, 8.53, 9.18, 6.93, 1.98, 7.59, 11.16 and 11.90 nm, respectively). Furthermore, the excitation energy (Eex) of HTMs has been evaluated, which results in the following sequence of values: HEL17 and HEL18 (3.52 eV) > HEL11 (3.50 eV) > HEL1 and HEL10 (3.49 eV) > HEL14 (3.48 eV) > HEL3, HEL9 and HEL12 (3.47 eV) > HEL4 and HEL5 (3.46 eV) > HEL2 and HEL6 (3.45 eV) > HEL13 (3.43 eV) > HEL (3.41 eV) > HEL8 (3.40 eV) > HEL16 (3.39 eV) > HEL7 (3.37 eV) > HEL15 (3.36 eV). The excitation energies are strongly affected by the nature and position of the substituent on the DPA units attached to the dithiahelicene core. Compounds bearing electron-withdrawing nitro groups at either ortho or meta position show higher Eex values due to the reduction of electron density in the π-system. In contrast, the presence of an electron-donating amino group at the ortho position leads to lower Eex, which can be attributed to enhanced electron donating and stronger conjugation, promoting intramolecular charge transfer (ICT)58. Lower vertical excitation energies in HTMs favor efficient charge separation by facilitating the transition of charge from bonding to antibonding orbitals. When benchmarked against the parent HEL molecule, HTMs HEL1–HEL6, HEL9–HEL14, HEL17 and HEL18 exhibit higher Eex values, whereas HEL7, HEL8, HEL15 and HEL16 show lower Eex. The oscillator strength (f) measures the intensity of the HOMO→LUMO transition, and the light-harvesting efficiency (LHE) is given by LHE = 1 − 10(–f)14,59. According to Table 3, HTMs HEL1, HEL10, HEL13, HEL14 and HEL17 have increased f and LHE relative to HEL; HEL3, HEL5- HEL9, HEL11, HEL12, HEL15, HEL16 and HEL18 display decreased values; and HEL2 and HEL4 retain the same f and LHE as HEL. Table 3The spectral features of the HTMs were examined via TD-DFT calculations at the CAM B3LYP/6-311G(d) level.HTMsλmax.(nm) CalcEex (eV)fLHEMO transitionsHEL363.393.410.830.85HOMO → LUMO (0.60)HEL1354.983.490.840.85HOMO → LUMO (0.60)HEL2359.363.450.830.85HOMO → LUMO (0.60)HEL3356.753.470.820.84HOMO → LUMO (0.61)HEL4358.173.460.830.85HOMO → LUMO (0.60)HEL5357.83.460.820.84HOMO → LUMO (0.61)HEL6358.653.450.820.84HOMO → LUMO (0.60)HEL7366.853.370.790.83HOMO → LUMO (0.60)HEL8363.883.400.820.84HOMO → LUMO (0.60)HEL9356.323.470.670.78HOMO → LUMO (0.61)HEL10354.863.490.860.86HOMO → LUMO (0.61)HEL11354.213.500.720.80HOMO → LUMO (0.56)HEL12356.463.470.800.84HOMO → LUMO (0.56)HEL13361.413.430.860.86HOMO → LUMO (0.61)HEL14355.83.480.860.86HOMO → LUMO (0.59)HEL15368.963.360.810.84HOMO → LUMO (0.59)HEL16365.283.390.760.82HOMO → LUMO (0.56)HEL17352.233.520.870.86HOMO → LUMO (0.05)HEL18351.493.520.550.71HOMO → LUMO (0.32) The spectral features of the HTMs were examined via TD-DFT calculations at the CAM B3LYP/6-311G(d) level. The computed molecular electrostatic potential (MEP) distributions for the designed HTMs Electrostatic potential levels (ESP) were calculated using the B3LYP method with the 6-311G(d) basis set. This approach is useful in accurately determining acidic and basic sites that may participate in intermolecular interactions, especially in polar environments60. Red regions represent electron-rich regions that are favorable for electrophilic reactions. In contrast, blue regions that are electron-deficient are favorable for nucleophilic reactions60. The electrostatic potential levels of the structures HEL, HEL1, and HEL2 are shown in Fig. 5, and those for the remaining structures are shown in Fig. S3. According to Fig. 5, in the HEL structure, the negative regions are mainly located on the DPA, dithiahelicene rings, and the methoxy oxygen, due to the high electronegativity and lone pairs of the N and O atoms, as well as the π-electron cloud of the aromatic system. Strong positive potential concentrates on the methyl hydrogens because the electron cloud shifts toward the carbon atom, leaving those hydrogens partially electropositive. In HEL1–HEL6, negative potential areas appear over the diphenylamine (DPA) unit, the dithiahelicene rings, the methoxy oxygen, and the halogens (F, Cl, Br) due to their high electronegativity and lone‐pair electrons. However, in the structures of HEL3 and HEL5, more negative charge is distributed on the dithiahelicene rings. This is attributed to the combined effect of their weaker inductive effect compared to F, their possible contribution to the mesomeric resonance, and the higher polarizability of chlorine and bromine atoms, which facilitates charge decentralization in the conjugated helicene system. The presence of methyl in HEL7 and HEL8 did not significantly change the positive and negative potential distribution compared to HEL. This is due to the weak inductive effect of the methyl group, the absence of resonance interactions with the π-system and its minimal steric interference on the helicene framework. In HEL9 and HEL10, the presence of the CN group with a negative electrostatic potential is strongly concentrated due to the strong inductive effect and high electronegativity of the CN group, especially on the N atom. For this reason, we observe a different charge distribution compared to the previous structures. As a result, the negative charge is more concentrated in the CN groups and we observe a relatively smaller charge distribution in the DPA, dithiahelicene and methoxy oxygen groups. For HEL11–HEL14, the regions of negative electrostatic potential are predominantly situated on the carbonyl oxygen atoms, reflecting the high electronegativity and inductive influence of the carboxyl and ketone groups61. However, in HEL11 and HEL12, due to the presence of two oxygens in the carboxyl group, the negative charge is more concentrated than in HEL13 and HEL14, which have one oxygen in the carbonyl groups. In HEL15 and HEL16, negative potential is still localized on the diphenylamine core, the dithiahelicene rings, and the ketone oxygen, but the presence of electron-donating NH₂ groups uniquely concentrates positive potential around the amine hydrogens62. And finally, HEL17 and HEL18, which have NO2 substitution. The localization of negative charge in these two molecules mirrors that seen in HEL11 and HEL12—both structures feature two electronegative oxygen atoms similar to a carboxyl group—but the nitro moiety concentrates negative potential more intensely than the carboxyl, thanks to its nitrogen atom being more electronegative than carbon48. As a result, the defects on the perovskite surface are expected to be reduced by the defined areas of negative potential, especially the Lewis base anchors, through coordination with the uncoordinated lead (Pb)63. Electrostatic potential map (ESP) of selected HTMs. ESP maps related to the remaining structures are provided in SI. Analysis of electron excitation Multiwfn 3.8 was employed to compute hole–electron distributions and wavefunction differences by contrasting the excited‐state and ground‐state electron densities24,64. The VMD visualization tool was then used to display these distributions24. Interfragment charge transfer (IFCT) analysis quantified the extent of electron transfer65. To describe spatial separation and overlap between holes and electrons, four descriptors were extracted: D: centroid distance between hole and electron distributions D: centroid distance between hole and electron distributions Sr: degree of spatial overlap Sr: degree of spatial overlap t: extent of separation t: extent of separation H: average width of the distributions H: average width of the distributions To comprehensively assess charge-carrier delocalization, we calculated both the hole-delocalization index (HDI) and the electron-delocalization index (EDI). Excited‐state properties of the optimized HTM geometries were evaluated using time‐dependent density functional theory (TD-DFT)66 with the CAM-B3LYP functional67 and the 6-311G(d) basis set to probe the S₀ → S₁ transition energies and wavefunctions25,26. Interfragment charge‐transfer (IFCT) analysis of the S₀ → S₁ excitation was carried out in Multiwfn 3.8 to quantify segment population changes, segmental contributions to hole and electron densities, inter-segment electron transfer, intra-segment electron redistribution, and both intrinsic and apparent percentages of charge transfer and localized excitation24,64. Table 4 presents these detailed IFCT metrics for all HTMs, and Fig. 6 illustrates the two-segment partitioning scheme used to visualize hole and electron distributions. Table 4Charge transfer between fragments of HTMs by IFCT method using the CAM-B3LYP function.Contribution of each fragment to hole and electronFragment 1%Fragment 2%HELHole:48.97% Electron:92.35%Hole:51.03% Electron:7.65%HEL1Hole:59.37% Electron:91.37%Hole:40.63% Electron:8.63%HEL2Hole:51.45% Electron:92.17%Hole:48.55% Electron:7.83%HEL3Hole:61.96% Electron:90.41%Hole:38.04% Electron:9.59%HEL4Hole:52.80% Electron:92.42%Hole:47.20%Electron:7.58%HEL5Hole:63.18% Electron:89.67%Hole:36.82%Electron:10.33%HEL6Hole:52.74% Electron:92.30%Hole:47.26% Electron:7.70%HEL7Hole:54.50% Electron:90.66%Hole:45.50%Electron:9.34%HEL8Hole:49.67% Electron:92.04%Hole:50.33% Electron:7.96%HEL9Hole:59.34% Electron:79.11%Hole:40.66% Electron:20.89%HEL10Hole:55.17% Electron:91.84%Hole:44.83% Electron:8.16%HEL11Hole:65.40% Electron:90.43%Hole:34.60% Electron:9.57%HEL12Hole:52.87% Electron:90.61%Hole:47.13%Electron:9.39%HEL13Hole:57.45% Electron:88.55%Hole:42.55%Electron:11.45%HEL14Hole:52.82% Electron:88.28%Hole:47.18% Electron:11.72%HEL15Hole:50.38% Electron:90.95%Hole:49.62%Electron:9.05%HEL16Hole:47.72% Electron:92.49%Hole:52.28% Electron:7.51%HEL17Hole:65.86% Electron:89.88%Hole:34.14% Electron:10.12%HEL18Hole:50.43% Electron:78.97%Hole:49.57%Electron:21.03% Charge transfer between fragments of HTMs by IFCT method using the CAM-B3LYP function. Got it. Please send over the text you’d like rephrased, and I’ll maintain its meaning while cutting down on similarity. One can gauge a electron-donating or –accepting character of compound by examining how holes and electrons distribute across its donor and acceptor fragments. Table 4 shows the hole and electron contributions of each segment for each HTM43. Consequently, the analysis reveals that for every HTM, fragment 2 contributes most to hole density while fragment 1 carries more electrons. Among the entire series, HEL16 exhibits the highest hole occupancy due to its strong amine donor ability and integral binding to the diphenylamine and helicene cores. In contrast, this decrease in hole percentage in HEL17 can be attributed to the strong electron-withdrawing nature of the nitro group, which reduces the electron density on the donor unit. In addition, the steric hindrance at the ortho position causes structural distortion and weakens the π-bonding, limiting the hole occupancy on this moiety68. The specific shifts in electron distribution between fragments 1 and 2 for each HTM are summarized below: HEL (0.43, − 0.43), HEL1 (0.32, − 0.32), HEL2 (0.40, − 0.40), HEL3 (0.28, − 0.28), HEL4 (0.39, − 0.39), HEL5 (0.26, − 0.26), HEL6 (0.39, − 0.39), HEL7 (0.36, − 0.36), HEL8 (0.42, − 0.42), HEL9 (0.19, − 0.19), HEL10 (0.36, − 0.36), HEL11 (0.25, − 0.25), HEL12 (0.37, − 0.37), HEL13 (0.31, − 0.31), HEL14 (0.35, − 0.35), HEL15 (0.40, − 0.40), HEL16 (0.44, − 0.44), HEL17 (0.24, − 0.24), HEL18 (0.28, − 0.28). Within the HTM series, the electron population shift spans from 0.24 to 0.44, with HEL9 registering the smallest change at 0.19. The intrafragment electron redistribution values for each HTM are presented below: HEL for fragment 1 is 0.45 and for fragment 2 is 0.03; HEL1 for fragment 1 is 0.54 and for fragment 2 is 0.03; HEL2 for fragment 1 is 0.47 and for fragment 2 is 0.03; HEL3 for fragment 1 is 0.56 and for fragment 2 is 0.03; HEL4 for fragment 1 is 0.48 and for fragment 2 is 0.03; HEL5 for fragment 1 is 0.56 and for fragment 2 is 0.03; HEL6 for fragment 1 is 0.48 and for fragment 2 is 0.03; HEL7 for fragment 1 is 0.49 and for fragment 2 is 0.04; HEL8 for fragment 1 is 0.45 and for fragment 2 is 0.04; HEL9 for fragment 1 is 0.46 and for fragment 2 is 0.08; HEL10 for fragment 1 is 0.50 and for fragment 2 is 0.03; HEL11 for fragment 1 is 0.59 and for fragment 2 is 0.03; HEL12 for fragment 1 is 0.47 and for fragment 2 is 0.04; HEL13 for fragment 1 is 0.50 and for fragment 2 is 0.04; HEL14 for fragment 1 is 0.46 and for fragment 2 is 0.05; HEL15 for fragment 1 is 0.45 and for fragment 2 is 0.04; HEL16 for fragment 1 is 0.44 and for fragment 2 is 0.03; HEL17 for fragment 1 is 0.59 and for fragment 2 is 0.03; HEL18 for fragment 1 is 0.39 and for fragment 2 is 0.10. In summary, the data reveal that electron reshuffling within fragment 2 (the donor) remains largely unaccounted for across the series. Although fragment 2 shows more pronounced electron shifts than fragment 1, the acceptor fragment still undergoes notable redistribution. The specific interfragment electron‐transfer details for each HTM are outlined below: HEL(1 → 2, 0.037) (2 → 1, 0.471), HEL1 (1 → 2, 0.051) (2 → 1, 0.371), HEL2 (1 → 2, 0.040) (2 → 1, 0.447), HEL3 (1 → 2, 0.059) (2 → 1, 0.343), HEL4 (1 → 2, 0.040) (2 → 1, 0.436), HEL5 (1 → 2, 0.065) (2 → 1, 0.330), HEL6 (1 → 2, 0.040) (2 → 1, 0.436), HEL7 (1 → 2, 0.050) (2 → 1, 0.412) , HEL8 (1 → 2, 0.039) (2 → 1, 0.463), HEL9 (1 → 2, 0.123) (2 → 1, 0.321), HEL10 (1 → 2, 0.045) (2 → 1, 0.411), HEL11 (1 → 2, 0.062) (2 → 1, 0.312), HEL12 (1 → 2, 0.049) (2 → 1, 0.427), HEL13 (1 → 2, 0.065) (2 → 1, 0.376), HEL14 (1 → 2, 0.061) (2 → 1, 0.416). HEL15 (1 → 2, 0.045) (2 → 1, 0.451), HEL16 (1 → 2, 0.035) (2 → 1, 0.483), HEL17 (1 → 2, 0.066) (2 → 1, 0.306), HEL18 (1 → 2, 0.106) (2 → 1, 0.391). To calculate the net electron transfer from fragment 2 to fragment 1, subtract the electrons lost in the (1 → 2) direction from those gained in the (2 → 1) direction69. The resulting net electrons transferred from (2 → 1) for each HTM are as follows: HEL (0.43), HEL1 (0.32), HEL2 (0.40), HEL3 (0.28), HEL4 (0.39), HEL5 (0.26), HEL6 (0.39), HEL7 (0.36), HEL8 (0.42), HEL9 (0.19), HEL10 (0.36), HEL11 (0.25), HEL12 (0.37), HEL13 (0.31), HEL14 (0.35), HEL15 (0.40), HEL16 (0.44), HEL17 (0.24), HEL18 (0.28). HEL16 (0.44) shows the highest net electron transfer, because the strongly donating –NH2 group effectively pushes the electron density from the DFA moiety towards the helicene core. While HEL9 (0.19) shows the lowest value, because the strongly withdrawing –CN group not only reduces the electron density from the DFA but also restricts the conjugation due to steric hindrance, thus suppressing the effective charge migration towards the helicene. The results show that in HEL16, a larger amount of electrons are transferred from (2 → 1); therefore, the moiety 2 plays the largest role in hole generation. The recorded values for the intrinsic and apparent charge transfer of the hole transporting materials (HTMs) are detailed below (%): HEL (50.86, 43.38), HEL1 (42.24, 32.00), HEL2 (48.77, 40.71), HEL3 (40.33, 28.45), HEL4 (47.62, 39.61), HEL5 (39.54, 26.49), HEL6 (47.68, 39.55), HEL7 (45.33, 36.16), HEL8 (50.27, 42.37), HEL9 (44.56, 19.77), HEL10 (45.67, 36.67), HEL11 (37.54, 25.03), HEL12 (47.67, 37.74), HEL13 (44.25, 31.09), HEL14 (47.84, 35.46), HEL15 (49.68, 40.57), HEL16 (51.93, 44.77), HEL17 (37.34, 24.02), HEL18 (49.75, 28.53). Here are the percentages determined for the HTMs’ intrinsic and apparent local excitations: HEL (49.13, 56.62), HEL1 (57.75, 67.99), HEL2 (51.22, 59.28), HEL3 (59.66, 71.54), HEL4 (52.37, 60.38), HEL5 (60.45, 73.50), HEL6 (52.32, 60.44), HEL7 (53.66, 63.83), HEL8 (49.72, 57.63), HEL9 (55.43, 80.22), HEL10 (54.32, 63.32), HEL11 (62.45, 74.97), HEL12 (52.32, 62.25), HEL13 (55.74, 68.90), HEL14 (52.15, 64.53). HEL15 (50.31, 59.42), HEL16 (48.06, 55.22), HEL17 (62.65, 75.97), HEL18 (50.24, 71.46). Using the CAM-B3LYP functional, we extracted the hole–electron distribution descriptors D, Sr, H, t, HDI, and EDI for all HTMs, with the full dataset collated in Table 5. In this context, D defines the separation between the centroids of the hole and electron densities. The calculated D values for each HTM are listed below: HEL11 (1.06 Å) > HEL12 (0.97 Å) > HEL7 (0.95 Å) > HEL16 (0.93 Å) > HEL15 (0.83 Å) > HEL3 (0.80 Å) > HEL5 (0.78 Å) > HEL1 (0.70 Å) > HEL9 (0.69 Å) > HEL13 (0.61 Å) > HEL17 (0.58 Å) > HEL8 (0.57 Å) > HEL18 (0.56 Å) > HEL10 (0.47 Å) > HEL2, HEL4 and HEL6 (0.46 Å) > HEL14 (0.45 Å) > HEL (0.43 Å). A larger D value corresponds to a more pronounced separation between the original hole and electron distribution regions48. The results show that HEL11, which contains a carboxyl group in the ortho position, exhibits the highest value, indicating significant intramolecular charge transfer to the carboxyl group. Conversely, HEL, the unsubstituted compound show a more balanced and less spatially separated charge distribution. The H-index reflects the average spatial spread of hole and electron distributions. The calculated H-index values for the HTMs are as follows: HEL18 (5.16 Å) > HEL14 (4.87 Å) > HEL (4.81 Å) > HEL8 (4.78 Å) > HEL2 (4.77 Å) > HEL6 (4.75 Å) > HEL4 (4.74 Å) > HEL10 (4.72 Å) > HEL13 (4.67 Å) > HEL16 (4.66 Å) > HEL15 (4.59 Å) > HEL12 and HEL17 (4.51 Å) > HEL1 (4.48 Å) > HEL9 (4.46 Å) > HEL7 (4.36 Å) > HEL3 (4.30 Å) > HEL5 (4.27 Å) > HEL11 (3.93 Å). Lower H-index values correspond to more tightly confined hole–electron localizations, whereas higher H-index values reflect a more extensive spatial spread of holes and electrons within the HTM24,70. The highest H-index observed for the meta-substituted nitro derivative (NO2-meta) indicates significant electron and hole delocalization throughout the structure, facilitated by its electron-withdrawing power and minimal steric disorder. In contrast, the ortho-substituted carboxylate compound (-COOH-ortho) exhibits the lowest H-index value, indicating a highly localized excited state charge density due to high steric disorder that restricts the electron and hole distribution. The t-index quantifies the spatial separation between electron and hole pairs. The nineteen HTMs, ordered by their t-index values, are listed as follows: HEL18 (-1.37 Å) > HEL17 (− 1.42 Å) > HEL10 (− 1.45 Å) > HEL14 (− 1.47 Å) > HEL13 (− 1.65 Å) > HEL4 (− 1.72 Å) > HEL11 (− 1.73 Å) > HEL6 (− 1.74 Å) > HEL (− 1.80 Å) > HEL2 (− 1.82 Å) > HEL5 (− 2.05 Å) > HEL3 (− 2.12 Å) > HEL9 (− 2.17 Å) > HEL1 (− 2.21 Å) > HEL8 (− 2.23 Å) > HEL7 (− 2.29 Å) > HEL15 (− 2.35 Å) > HEL12 (− 2.59 Å) > HEL16 (− 2.75 Å). All HTMs exhibit negative t-indices. Negative values indicate that the electron and hole are spatially close together and not completely separated. The closer this number is to positive, the better the charge separation occurs48. The Sr index quantifies how much the hole and electron regions overlap. Larger Sr values signify a smaller overlap. The Sr values are as follows: HEL17 (0.77) > HEL3, HEL5 and HEL11 (0.76) > HEL1, HEL9 and HEL13 (0.75) > HEL7 (0.74) > HEL10, HEL12 and HEL14 (0.73) > HEL2, HEL4, HEL6, HEL15 and HEL18 (0.72) > HEL and HEL8 (0.71) > HEL16 (0.70). The maximum value of the Sr index is 1.059. For most of the structures studied, the Sr index value is in the range of 0.70 to 0.77, indicating moderate electron–hole overlap71. Consequently, the excited state parameters (D, H, t, and Sr) reflect the charge separation behavior of helicene-based HTMs. Lower SR and higher D/t values indicate stronger intramolecular charge transfer (ICT) and more efficient electron–hole separation, while higher H values indicate better hole delocalization and improved hole transport ability72. The electron‐delocalization index (EDI) and hole‐delocalization index (HDI) respectively quantify the spatial extent of electron and hole delocalization64. The determined EDI values are as follows: HEL11 (5.51) > HEL7 (5.46) > HEL5 (5.41) > HEL3 (5.40) > HEL12 (5.32) > HEL15 (5.30) > HEL16 (5.26) > HEL1 (5.24) > HEL7 (5.08) > HEL4 (5.12) > HEL2 and HEL6 (5.11) > HEL and HEL8 (5.09) > HEL10 (5.07) > HEL17 (5.04) > HEL9 and HEL13 (4.91) > HEL14 (4.87) > HEL18 (4.62). The values of the HDI index for HTMs are as follows: HEL11 (6.26) > HEL7 (6.18) > HEL15 (5.89) > HEL16 (5.85) > HEL5 and HEL12 (5.81) > HEL3 (5.75) > HEL9 (5.64) > HEL1 (5.51) > HEL8 (5.47) > HEL13 (5.43) > HEL (5.42) > HEL2 (5.32) > HEL4 (5.29) > HEL6 (5.27) > HEL14 (5.23) > HEL10 (5.18) > HEL17 (5.15) > HEL18 (5.06). For all HTMs, the EDI values are in the range (4.62–5.51) and the HDI values are in the range (5.06–6.26). Higher HDI and EDI values indicate improved hole and electron localization, while lower values indicate a higher degree of hole and electron delocalization71. The high EDI of HEL11 is due to the good electron-withdrawing effect of the carboxyl group, which increases the charge polarization and creates a stronger local disorder that promotes a greater spatial separation of the electron–hole pairs. In contrast, HEL18 (nitro group) has the ability to effectively resonate with the more restricted conjugated pathway, resulting in the lowest EDI value. Also, HEL11 (carboxyl derivatives) shows the highest HDI value, indicating the localization of the hole on the donor (DPA) due to the spatial perturbation and effective reduction of coupling through the conjugated pathway. In contrast, HEL18 has the lowest HDI value, indicating the lack of extensive hole occupancy on the helicene-DPA conjugated substrate due to the weak resonance coupling with the conjugated chain and its inductive effect. The findings show that the D index for all structures increased compared to HEL. Furthermore, the H-index for the HEL14 and HEL18 structures increased compared to HEL, while the other structures experienced a decrease. The t value for HEL1, HEL2, HEL3, HEL5, HEL7, HEL8, HEL9, HEL12, HEL15 and HEL16 decreased compared to HEL, while the other structures showed a higher value compared to HEL. In terms of Sr index, the values of HEL16 are lower than those of the HEL structure. Finally, the net charge transfer (Q) analysis shows that all structures except HEL16 showed a decrease compared to the HEL base structure. Overall, research indicates that HEL, HEL1, HEL3, HEL5, HEL7, HEL8, HEL13, HEL15, and HEL16 are effective HTMs, exhibiting a net charge between (0.26–0.44 e−), a contribution of 2 fragments as a hole (36.82–52.28%), D values ranging from (0.43–0.95 Å), H values between (4.27–4.81 Å), t values from ((− 2.75)–(− 1.65) Å), and Sr values in the range of (0.70–0.76). In this series of hole-transporting materials, HEL16—which has a terminal amine at the meta-position of its diphenylamine unit—shows the lowest overlap index (Sr = 0.70), the highest hole localization (52.28%), and the highest net charge transfer enhancement (Q = 0.44 e⁻) among all candidates, with a relatively higher center-of-mass separation (D = 0.93 Å). These parameters indicate that HEL16 exhibits a higher electronic efficiency than other similar structures. Furthermore, among the other structures examined, HEL, which is an unsubstituted structure, exhibits a greater degree of steric expansion (H = 4.81 Å), while HEL13, which contains a ketone substituent at the ortho-DPA position, exhibits a more prominent degree of electron–hole separation (t = -1.65 Å) than the other structures. Table 5Computed results for the electron–hole distribution index based on the S₀ → S₁ transition.HTMsD(Å)H(Å)t (Å)SrHDIEDIHEL0.434.81− 1.800.715.425.09HEL10.704.48− 2.210.755.515.24HEL20.464.77− 1.820.725.325.11HEL30.804.30− 2.120.765.755.40HEL40.464.74− 1.720.725.295.12HEL50.784.27− 2.050.765.815.41HEL60.464.75− 1.740.725.275.11HEL70.954.36− 2.290.746.185.46HEL80.574.78− 2.230.715.475.09HEL90.694.46− 2.170.755.644.91HEL100.474.72− 1.450.735.185.07HEL111.063.93− 1.730.766.265.51HEL120.974.51− 2.590.735.815.32HEL130.614.67− 1.650.755.434.91HEL140.454.87− 1.470.735.234.87HEL150.834.59− 2.350.725.895.30HEL160.934.66− 2.750.705.855.26HEL170.584.51− 1.420.775.155.04HEL180.565.16− 1.370.725.064.62 Computed results for the electron–hole distribution index based on the S₀ → S₁ transition. Figure 7a shows the CTM heat maps and Fig. 7b shows the electron and hole distribution maps of HEL, HEL1 and HEL2 that examined via TD-DFT calculations at the CAM B3LYP/6-311G(d) level. Also, for the rest of the structures, it is shown in Fig. S4. Figure S5 lists all HTMs with their atoms numbered in sequence. On the heat maps, the x-axis corresponds to hole locations and the y-axis to electron locations73. By default, the sidebar displays a color scale where the minimum value is set at zero and the maximum value is aligned with the highest digit in the matrix.70. For all HTMs examined, heatmap analysis shows increased values along the y-axis corresponding to atoms 1–10 and atoms 49–58, which are associated with the dithiahelicene ring. Specifically, atoms 7, 14, and 31 exhibit notable contributions. This pattern suggests that during the S₀ → S₁ electronic excitation, a significant electron density transfer occurs from atoms 14 and 31, which correspond to the nitrogen atoms in the diphenylamine (DPA) moieties, whereas atom 7 donates a comparatively smaller electron contribution to the regions comprising atoms 1 to 10 and 49 to 58. Furthermore, in the case of HEL9, the y-axis shows that the region associated with atoms 1–10, 39–58 in the heat map shows significant values (X = 7, 14, 31). This behavior is due to the cyano groups with a vertical position on the DPA rings, which strongly attract electron density74,75. The same trend is also observed in the electron–hole distribution diagrams, where holes are shown in green and electrons in blue. The CTM heat map alongside diagrams illustrating electron and hole distributions, presented for selected structures. The giagram for remining structures are provided in SI. Reorganization energy (RE) and exciton binding energy (Eb) The reorganization energy, which encompasses both internal and external reorganization energies, represents a significant element in assessing charge transfer. An increase in reorganization energy correlates with a decrease in the charge transfer rate25,76. Using Eq. 3, the total reorganization energy for holes (λhole) can be determined.28,76: Define E₀ as the ground-state energy of the fully optimized neutral molecule and E⁺ as that of the optimized cation. E⁺ is obtained by computing the energy of cation in the optimized geometry of neutral structure, while E₀ is the energy evaluated neutral molecule at the optimized geometry of cation. The hole reorganization energy, λhole, is then given by: HEL13 (0.353 eV) > HEL11 (0.325 eV) > HEL9 and HEL17 (0.299 eV) > HEL16 (0.298 eV) > HEL3, HEL5, HEL14 and HEL18 (0.271 eV) > HEL1 (0.245 eV) > HEL6 and HEL10 (0.244 eV) > HEL12 (0.243 eV) > HEL15 (0.218 eV) > HEL2 and HEL3 (0.217 eV) > HEL7 and HEL8 (0.216 eV) > HEL (0.190 eV). HEL13 exhibits the highest λhole value of 0.353 eV and the lowest charge transfer rate, whereas HEL, with a λhole value of 0.190 eV, demonstrates the highest charge transfer rate. Consequently, HEL13, which contains a ketone substituent at the ortho position of DPA, displays larger λhole values compared to other hole transport materials (HTMs). This behavior can be explained by examining the increased reorganization energy (RE) linked to the ketone functional group. As per Marcus charge transfer theory, the rate of hole transfer exhibits an inverse relationship with the reorganization energy (λ). The ketone group, due to its planar and rigin C = O structure, requires more significant geometric distortion during hole transfer, thereby increasing the total RE50,51. Also, HEL, which is the basic structure and has no substitutions, has the lowest λhole value (0.190 eV). The pertinent information is presented in Table 6. Comparing the HTMs with the base HTM (HEL), it is shown that the λhole cavity of all the HTMs with substitution is larger. To attain maximum efficiency, bound electron–hole pairs must dissociate into separate positive and negative charges, overcoming their Coulomb attraction51. The binding energy of an electron–hole pair (Eb), which is crucial for driving effective charge separation, is defined by the Eq. 451,77: Table 6Hole–electron binding energies and the reorganization energies of the HTMs were evaluated using the B3LYP/6-311G(d) level of theory.HTMEg (eV)E1 (eV)Eb (eV)λhole (eV)HEL5.583.412.170.190HEL15.703.492.210.245HEL25.623.452.170.217HEL35.693.472.220.271HEL45.643.462.180.217HEL55.693.462.230.271HEL65.643.452.190.244HEL75.573.372.20.216HEL85.573.402.170.216HEL95.723.472.250.299HEL105.683.492.190.244HEL115.683.502.180.325HEL125.653.472.180.243HEL135.623.432.190.353HEL145.673.482.190.271HEL155.543.362.180.218HEL165.523.392.130.298HEL175.243.521.720.299HEL185.463.521.940.271 Hole–electron binding energies and the reorganization energies of the HTMs were evaluated using the B3LYP/6-311G(d) level of theory. Eg denotes the electronic band gap, which can be taken as the ΔH–L (HOMO–LUMO) energy difference, while Ex refers to the optical gap, typically defined as the first singlet excitation energy (E₁). The binding energy of the electron–hole pair, Eb, decreases as the strength of their interaction weakens, thereby promoting enhanced charge transfer78. The corresponding values are presented in Table 6. Analysis of these results shows that the Eb values follow the order: HEL17 (0.56 eV) > HEL5 (0.52 eV) > HEL6 and HEL9 (0.50 eV) > HEL, HEL1, HEL2, HEL4, HEL10 and HEL13 (0.49 eV) > HEL3, HEL7, HEL8, HEL12, HEL14 and HEL15 (0.48 eV) > HEL11 and HEL16 (0.46 eV) > HEL18 (0.44 eV). The results indicate that a greater electron-donating capacity facilitates the separation of electron–hole pairs, thereby allowing them to escape from Coulombic attraction. Consequently, the incorporation of electron-releasing groups significantly enhances the mobility of carriers (both electrons and holes)77. The energy barrier values (Eb) of 0.49 eV were recorded for HEL, HEL1, HEL2, HEL4, HEL10, and HEL13. In contrast, the Eb of HEL5 (0.03 eV), HEL6, and HEL9 (0.01 eV), along with HEL17 (0.07 eV), demonstrates an increase compared to HEL. By contrast, HEL3, HEL7, HEL8, HEL12, HEL14, and HEL15 each have an Eb of 0.01 eV; HEL11 and HEL16 show 0.03 eV; and HEL18 records 0.45 eV—each of which is lower than that of HEL. Durability and dissolution characteristics of HTMs Optimal HTMs must dissolve well in organic solvents and retain stability upon air exposure76. Absolute hardness (η), defined as η = (IPa – EAa)/2, serves as a measure of a stability of an organic compound51. This parameter quantifies the resistance of molecules to variations in its electron population51. Information pertaining to absolute hardness is presented in Table 7, arranged in the following sequence: HEL3 and HEL9 (2.53 eV) > HEL11 (2.52 eV) > HEL5 (2.50 eV) > HEL4 and HEL6 (2.49 eV) > HEL2 (2.48 eV) > HEL7, HEL10 and HEL12 (2.46 eV) > HEL and HEL1 (2.44 eV) > HEL8 (2.43 eV) > HEL13 and HEL15 (2.41 eV) > HEL14 (2.39 eV) > HEL16 (2.35 eV) > HEL18 (2.29eV) > HEL17 (2.16 eV). Among the nineteen HTM studied, the HEL3 and HEL9, which have Cl and CN substitutions in the ortho position of DPA exhibited the highest chemical hardness. This behavior arises from a combination of strong inductive electron-withdrawing effects, significantly lower the HOMO level, and steric interference, which disrupts π-conjugations and planarity of the molecule. In particular, the CN group, with its dual inductive and mesomeric effects, not only stabilizes the ground state but also reduces the polarizability of the electronic cloud, leading to a less reactive, most stable, and more rigid electronic structure. In contrast, more polarizable or resonance stabilizing group like NO2 lower both HOMO and LUMO, resulting in a comparatively smaller hardness increase77. Furthermore, the findings indicate that stability diminishes in the presence of electron-donating groups, particularly those that are strong electron donors28. The η values are indicative of the absolute hardness of the hole transport materials (HTMs), with HEL equating to HEL1 at 2.44 eV. The η values for HEL2 (0.04 eV), HEL3 (0.09 eV), HEL4 (0.05 eV), HEL5 (0.06 eV), HEL6 (0.05 eV), HEL7 (0.02 eV), HEL9 (0.09 eV), HEL10 (0.02 eV), HEL11 (0.08 eV), and HEL12 (0.02 eV) show an increase when compared to HEL. In comparison with HEL, HEL8 (0.01 eV), HEL13 (0.03 eV), HEL14 (0.05 eV), HEL15 (0.03 eV), HEL16 (0.09 eV), HEL17 (0.28 eV), and HEL18 (0.15 eV) all exhibit reduced η values. Adiabatic electron affinity (EAa) and adiabatic ionization potential (IPa) serve as fundamental metrics for evaluating charge‐transport performance of a material. Empirical studies demonstrate that pairing a low IPa with a high EAa optimizes both hole and electron injection. In our calculations at the B3LYP/6-311G(d) level, EAa and IPa are derived from the ground‐state energies of the fully optimized neutral molecule (E₀), its cation (E⁺), and its anion (E⁻)76,79. The resulting EAa and IPa figures are summarized in Table 7. Table 7Adiabatic ionization potentials (IPa), electron affinities (EAa), absolute hardness (η), and solvation free energies (ΔGsol) for the hole transport materials were evaluated using the B3LYP/6-311G(d) level of theory.HTMsIPa (eV)EAa (eV)η (eV)ΔGsol (eV)HEL5.500.622.44− 0.48HEL15.530.652.44− 0.51HEL25.630.672.48− 0.51HEL35.580.512.53− 0.48HEL45.660.672.49− 0.51HEL55.550.542.50− 0.51HEL65.660.672.49− 0.51HEL75.500.572.46− 0.46HEL85.470.572.43− 0.43HEL95.660.592.53− 0.70HEL105.800.862.46− 0.75HEL115.770.732.52− 0.84HEL125.690.762.46− 0.81HEL135.470.652.41− 0.62HEL145.550.762.39− 0.65HEL155.530.702.41− 0.59HEL165.340.622.35− 0.59HEL175.661.322.16− 0.67HEL185.831.242.29− 0.73 Adiabatic ionization potentials (IPa), electron affinities (EAa), absolute hardness (η), and solvation free energies (ΔGsol) for the hole transport materials were evaluated using the B3LYP/6-311G(d) level of theory. Ionization potential (IPa) quantifies the energy needed to remove a loosely bound electron and serves as a key indicator of hole‐transport efficiency12. The determined IPa values are: HEL18 (5.83 eV) > HEL10 (5.80 eV) > HEL11 (5.77 eV) > HEL12 (5.69 eV) > HEL4, HEL6, HEL9 and HEL17 (5.66 eV) > HEL2 (5.63 eV) > HEL3 (5.58 eV) > HEL5 and HEL14 (5.55 eV) > HEL1 and HEL15 (5.53 eV) > HEL and HEL7 (5.50 eV) > HEL8 and HEL13 (5.47 eV) > HEL16 (5.34 eV). The results suggest that the (IPa) decreases when electron-donating groups, such as amines, are present, in comparison to electron-withdrawing groups like nitro. Among the hole transport materials (HTMs), HEL16, which features a robust electron donor at the meta position of diphenylamine (DPA), exhibits a reduced IPa value of 5.34 eV. Consequently, decreasing IPa values is beneficial for the generation of holes44. In other words, in hole transport materials (HTMs), decreasing IPa values improves hole mobility80. The IPa values for HEL1 (0.03 eV), HEL2 (0.13 eV), HEL3 (0.08 eV), HEL4 (0.16 eV), HEL5 (0.05 eV), HEL6 and HEL9 (0.16 eV), HEL10 (0.3 eV), HEL11 (0.27 eV), HEL12 (0.19 eV), HEL14 (0.05 eV), HEL15 (0.03 eV), HEL17 (0.16 eV), and HEL18 (0.33 eV) demonstrate a rise in comparison to HEL. Furthermore, the IPa values for HEL8 and HEL13 (0.03 eV) as well as HEL16 (0.16 eV) are diminished when contrasted with HEL. Furthermore, the IPa value of HEL7 remains unchanged in comparison to HEL. In addition, the HTMs designed to facilitate their application as a uniform layer on the perovskite must exhibit sufficient solubility. Transport-related parameters, including reorganization energy(λhole ), ionization potential (IPa), and mobility, strongly affect the hole transport performance of helicene-based HTMs. Lower reorganization energy facilitates charge hopping, while lower ionization potential facilitates hole injection and extraction. Higher mobility increases the charge transport efficiency and suppresses charge recombination, leading to improved photovoltaic performance81. The solubility free energy is expressed using the equation ΔGsol = Gsol—Ggas77,82,83. In this equation, Gsol denotes the free energy of the HTMs in the solvent phase, while Ggas refers to their free energy in the gas phase48. In Table 7, we present the computed solvation free energies for each compound using dichloromethane (DCM) as the solvent. A negative value of the solvation free energy indicates that dissolution proceeds spontaneously84,85. As illustrated in Table 7, the order of solvation-free energy is as follows: HEL11 (− 0.84 eV) > HEL12 (− 0.81 eV) > HEL10 (− 0.75 eV) > HEL18 (− 0.73 eV) > HEL9 (− 0.70 eV) > HEL17 (− 0.67 eV) > HEL14 (− 0.65 eV) > HEL13 (− 0.62 eV) > HEL15 and HEL16 (− 0.59 eV) > HEL1, HEL2, HEL4, HEL5, and HEL6 (− 0.51 eV) > HEL and HEL3 (− 0.48 eV) > HEL7 (− 0.46 eV) > HEL8 (− 0.43 eV). The findings show that for all the hole transport materials (HTMs), the solubility-free energy values are negative, indicating the solubility of the structures in dichloromethane solvent. Among the studied HTMs, HEL11 shows the highest solubility. In dichloromethane, the ortho-substituted carboxyl group exhibits the highest solubility due to its strong polarity, hydrogen bonding ability, and steric hindrance that reduce π–π stacking. In contrast, the meta-substituted methyl group shows the lowest solubility, as it is nonpolar, lacks hydrogen bonding capability, and promotes molecular aggregation, leading to the lowest ΔGsol. To create uniform cells, it is crucial to improve solubility, which can enhance charge transfer at the perovskite/HTM interface84,85. The ΔGsol values of -0.48 eV were recorded for HEL and HEL3. In contrast, the ΔGsol values for HEL1, HEL2, HEL4, HEL5, and HEL6 (0.03 eV), HEL9 (0.22 eV), HEL10 (0.27 eV), HEL11 (0.36 eV), HEL12 (0.33 eV), HEL13 (0.14 eV), HEL14 (0.17 eV), HEL15 and HEL16 (0.11 eV), HEL17 (0.19 eV), and HEL18 (0.25 eV) indicate a rise in comparison to HEL. In contrast, the ΔGsol values for HEL7 (0.02 eV) and HEL8 (0.05 eV) show a decline in relation to HEL. The transport of charge and the optoelectronic characteristics of hole transport materials (HTMs) are crucial for comprehending their prospective applications in devices. A recent investigation explored how the molecular architecture of various hole-transport materials (HTMs) influences their photophysical and electronic behaviors86,87. Their charge-carrying capabilities and optical properties are compiled in Table 8 to pinpoint the most effective candidates. Key descriptors in this assessment are the HOMO energy (EHOMO), LUMO energy (ELUMO), and the resulting gap (Egap)86. For optimal hole extraction, HOMO of HTM must lie above that of MAPbI₃, and its LUMO must exceed conduction band of MAPbI₃ to prevent electron back-transfer to the gold electrode36. The data show that HEL2, HEL4, HEL6, HEL9, HEL10, HEL11, HEL12, HEL14, HEL17, and HEL18—each bearing terminal substituents like –F, –Cl, –Br, –CN, –COOH, –COR, or –NO₂—have HOMO levels misaligned with HOMO of MAPbI₃, disqualifying them for practical use. In contrast, HEL, HEL1, HEL3, HEL5, HEL7, HEL8, HEL13, HEL15, and HEL16, which carry –F, –Cl, –Br, –CH₃, –COR, or –NH₂ groups, exhibit HOMO and LUMO energies that align favorably with those of MAPbI₃, making them promising for device integration. Therefore, these HTMs (HEL, HEL1, HEL3, HEL5, HEL7, HEL8, HEL13, HEL15, and HEL16) are considered suitable. In hole transport materials (HTMs) such as HEL, HEL1, HEL3, HEL5, HEL7, HEL8, HEL13, HEL15, and HEL16, the maximum absorption wavelength (λmax) varies from 354.98 to 368.96 nm, which is in the visible spectrum. Consequently, these compounds are recommended as hole-transport materials for perovskite solar cells built on the conventional n–i–p architecture. Furthermore, compared with the absorption λmax of HEL, the absorption λmax of HTM materials (especially HEL1-HEL7, HEL9-HEL14, HEL17 and HEL18) shows a blue shift. Conversely, the absorption λmax of HEL7, HEL8, HEL15 and HEL16 shows a red shift compared to HEL. An optimal energy gap enhances donor–acceptor interactions and promotes efficient transfer of excited electrons, thereby enabling light absorption across a broad spectral range45,88. Hole‐transport materials with narrower band gaps and superior hole mobilities are expected to boost device performance46. Our results show that HEL1, HEL3, HEL5, HEL7, and HEL13 possess larger Egap values compared to HEL, whereas HEL15 and HEL16 display reduced gaps, and both HEL and HEL8 exhibit an Egap of 2.75 eV. Charge‐transport descriptors—IPa, λhole, Eb, and electron–hole distribution indices—remain essential for fully characterizing and predicting the transport behavior of these materials. A comparative fragment-based analysis (Table 8) shows that, relative to the parent HEL, the hole contribution from fragment 2 and the Q index both decrease for all HTMs except HEL16. In contrast, the HEL structure uniquely exhibits an increased H index, and both HEL13 and HEL exhibit high t indices. Furthermore, each viable HTM exhibits a higher D index and a larger hole reorganization energy (λhole) than HEL. Finally, aside from HEL16, all candidate materials also present an increased Sr index when compared to HEL. The Eb of HEL5 increases compared to HEL. The Eb of HEL3, HEL7, HEL8, HEL15 and HEL16 decreases compared to HEL. Also, HEL1 and HEL13 have the same value as HEL. The IPa values of HEL1, HEL3, HEL5, and HEL15 show an increase in comparison to HEL. Conversely, the IPa values of HEL8, HEL13, and HEL16 exhibit a decrease relative to HEL. Furthermore, HEL7 has the same weight as HEL. Stability and solubility are other critical factors to consider when selecting an optimal HTM. For hole transport materials (HTMs), especially HEL, which is equivalent to HEL1, η values are measured at 2.44 eV. In contrast, the η values for HEL3, HEL5, and HEL7 show an increase relative to HEL. Conversely, the η values for HEL8, HEL13, HEL15, and HEL16 exhibit a decrease when compared to HEL. The ΔGsol values for HEL1, HEL5, HEL12, HEL15, and HEL16 show an increase in comparison to HEL, whereas the ΔGsol values for HEL7 and HEL8 exhibit a decrease relative to HEL. Additionally, HEL3 demonstrates an equivalent value to that of HEL. Consequently, by evaluating parameters such as HOMO/LUMO energies, absorption characteristics, band gap values, electron–hole distribution metrics, reorganization energies, and ionization potentials, a solid theoretical framework was established for exploring the optoelectronic behavior of HTMs. The photophysical characteristics, charge transfer attributes, and additional factors like stability and solubility suggest that, in the majority of instances, HEL16 exhibits superior properties as a hole transport material (HTM) compared to HEL. As a result, HEL16, which uses the (n-i-p) configuration, is a good example of a perovskite solar cell. HEL16 has good photophysical and charge transport properties such as alignment of HEL16 and MAPbI3 energy levels, minimum electron gap of 2.70 eV, λmax at 365.28 nm, hole peak contribution of 52.28%, hole-electron distribution parameters (D = 0.93 Å, minimum Sr = 0.70, H = 4.66 Å and t = -2.75 Å), highest charge Q at 0.44 e-, minimum Eb equal to 0.46 eV, lowest IPa at 5.34 eV, ΔGsol equal to -0.59 eV, λhole equal to 0.298 eV and lowest ƞ equal to 2.35 eV. As a result, HEL16 is likely to show better optoelectronic performance compared to other hole transport materials (HTM). Table 8The photophysical profiles and charge transport capabilities of HTMs were determined using the B3LYP/6-311G(d) computational level, except for the parameters of the λmax, Contribution of 2 fragment as hole, net charge, D, H, T, and SR, which were calculated with CAM-B3LYP-311G(d).HTMsE* HOMO eVE* LUMO eVE* gap eVλ max nmContribution of 2 fragment as holeNet chargeD(Å)H(Å)t(Å)Srλhole eVEb eVƞ eVIPa eVΔGsol eVHEL− 5.36− 2.612.75363.3951.03%0.430.434.81− 1.800.710.1900.492.445.50− 0.48HEL1− 5.38− 2.512.87354.9840.63%0.320.704.48− 2.210.750.2450.492.445.53− 0.51HEL2− 5.48− 2.692.79359.3648.55%0.400.464.77− 1.820.720.2170.492.485.63− 0.51HEL3− 5.41− 2.522.89356.7538.04%0.280.804.30− 2.120.760.2710.482.535.58− 0.48HEL4− 5.53− 2.722.81358.1747.20%0.390.464.74− 1.720.720.2170.492.495.66− 0.51HEL5− 5.38− 2.532.85357.8036.82%0.260.784.27− 2.050.760.2710.522.505.55− 0.51HEL6− 5.52− 2.722.80358.6547.26%0.390.464.75− 1.740.720.2440.502.495.66− 0.51HEL7− 5.32− 2.552.77366.8545.50%0.360.954.36− 2.290.740.2160.482.465.50− 0.46HEL8− 5.31− 2.562.75363.8850.33%0.420.574.78− 2.230.710.2160.482.435.47− 0.43HEL9− 5.51− 2.622.89356.3240.66%0.190.694.46− 2.170.750.2990.502.535.66− 0.70HEL10− 5.70− 2.842.86354.8644.83%0.360.474.72− 1.450.730.2440.492.465.80− 0.75HEL11− 5.58− 2.682.90354.2134.60%0.251.063.93− 1.730.760.3250.462.525.77− 0.84HEL12− 5.54− 2.712.83356.4647.13%0.370.974.51− 2.590.730.2430.482.465.69− 0.81HEL13− 5.38− 2.582.80361.4142.55%0.310.614.67− 1.650.750.3530.492.415.47− 0.62HEL14− 5.44− 2.612.83355.8047.18%0.350.454.87− 1.470.730.2710.482.395.55− 0.65HEL15− 5.38− 2.672.71368.9649.62%0.400.834.59− 2.350.720.2180.482.415.53− 0.59HEL16− 5.27− 2.572.70365.2852.28%0.440.934.66− 2.750.700.2980.462.355.34− 0.59HEL17− 5.53− 3.372.16352.2334.14%0.240.584.51− 1.420.770.2990.562.165.66− 0.67HEL18− 5.72− 3.202.52351.4949.57%0.280.565.16− 1.370.720.2710.442.295.83− 0.73 The photophysical profiles and charge transport capabilities of HTMs were determined using the B3LYP/6-311G(d) computational level, except for the parameters of the λmax, Contribution of 2 fragment as hole, net charge, D, H, T, and SR, which were calculated with CAM-B3LYP-311G(d). Conclusion In this research, innovative helicene-based hole-transporting materials (HTMs) were developed. To assess the effectiveness of designed compounds as hole-transport material, density functional theory (DFT) investigations were undertaken. The calculated frontier molecular orbital energies for HEL, HEL1, HEL3, HEL5, HEL7, HEL8, HEL13, HEL15, and HEL16 closely match those of MAPbI₃. Also, confirming their suitability The selected HTMs have a more favorable HOMO/LUMO distribution, stronger electron scattering, and improved intramolecular charge transport properties, which leads to improved hole transport capability and reduced charge recombination compared to other structures. Conversely, the HTMs (HEL2, HEL4, HEL6, HEL9, HEL10, HEL11, HEL12, HEL14, HEL17, and HEL18) are deemed unsuitable. The HTMs exhibit peak absorption between 354.98 and 368.96, making them well‐suited for integration into conventional n–i–p perovskite solar cells. HEL16 features the narrowest band gap among the series, a trait that typically boosts photovoltaic performance. Insights from electron–hole density maps and interfacial charge‐transfer analysis reveal that its molecular architecture supports especially efficient carrier mobility. Across the HTM set, the hole reorganization energies span 0.190–0.353 eV, and lower λhole values—such as that found for HEL16—favor faster hole hopping. Its calculated electron–hole binding energy is also among the lowest, indicating superior exciton dissociation. With an adiabatic ionization potential of just 5.34 eV, HEL16 stands out for facile hole formation. Finally, the incorporation of electron‐donating substituents (with energy levels in the 2.35–2.53 eV range) further enhances HTM robustness, contributing to overall device stability and efficiency. HEL16 demonstrates high solubility, a critical factor for achieving uniform cell formation. HEL16 exhibits a higher hole generation capacity due to the electron-donating effect of the amine group, which increases electron delocalization and intramolecular charge transfer. In addition, the meta configuration reduces spatial distortion and helps improve thermodynamic stability and solubility. HEL16’s frontier orbital energies are − 5.27 eV (HOMO) and − 2.57 eV (LUMO), giving a band gap of 2.70 eV and an absorption maximum at 365.28 nm. Its electron–hole distribution metrics are D = 0.93 Å, H = 4.66 Å, t = − 2.75 Å, and Sr = 0.70 Å. The molecule carries a net charge of 0.44 e– with a 52.28% hole contribution, an energy barrier of 0.46 eV, an IPa of 5.34 eV, a solvation free energy of − 0.59 eV, a hole reorganization energy (λhole) of 0.298 eV, and a mobility (η) of 2.35 eV. Because its orbital energies align with MAPbI₃, coupled with its favorable electron–hole distribution, high solubility, and enhanced hole mobility, HEL16 is proposed as an effective HTM for n–i–p perovskite solar cells. Supplementary Information Below is the link to the electronic supplementary material. Supplementary Material 1 Acknowledgements The support from Research Council of University of Tabriz is acknowledged. Author contributions S.S.: Computational analysis, data visualization, interpretation of results, writing—original draft. R.G.: Conceptualization, project administration, writing—review & editing. Data availability All data generated or analysed during this study are included in this published article and its supplementary information files. Declarations Competing Interests The authors declare no competing interests. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. References Associated Data Supplementary Materials Supplementary Material 1 Data Availability Statement All data generated or analysed during this study are included in this published article and its supplementary information files.