Merging bioinspired incubation with supramolecular photocatalysis for Michaelis CO2 reduction beyond enzymes Authors: Xin Xu, Junkai Cai, Qiaojia Guo, Peng Wang, Chunying Duan Published: 2026 ABSTRACT AbstractThe conversion of carbon dioxide into chemicals and fuels via photoreduction offers a promising path toward a sustainable and carbon-neutral future, but the low concentration of photosensitized reactive species and their associated sluggish kinetics limit energy conversion. Herein, a bioinspired incubation strategy is developed to pretreat an artificial cofactor 1,3-dimethyl-2-phenyl-2,3-dihydrobenzimidazole (BIH) with a photocatalyst, enriching reactive species within an FeIII-porphyrin-modified capsule. Pre-incubation of Ir(ppy)3 with BIH produces an elevated concentration of anionic IrII(ppy)3 species, which are abstracted into the cationic capsule to enable a saturated enzymatic conversion of CO2-to-CO. This photocatalytic system achieves a turnover number of 180,000 and a turnover frequency of 165 s−1 for CO production, comparable to the reported most effective photocatalytic CO2-to-CO systems and typical CO2 reductases. This pseudo-enzymatic transformation allows concurrent intramolecular cyclic dehydrogenation of imines and CO2 reduction. Here, we show an opportunity for facilitating the conversion of high-energy-barrier photocatalysis under mild conditions.Subject terms: Chemistry, Molecular capsules, Inorganic chemistry Introduction The conversion of carbon dioxide into fuels and valuable chemicals through visible light-driven processes holds the promise of becoming a transformative technology with profound implications for future generations and a significant contribution toward a net-zero carbon economy1,2. Recent breakthroughs have led to the creation of numerous techniques, which skillfully integrate essential functional components to accomplish photocatalytic reduction of CO2 and innovative photoredox catalytic methods to synthesize organic chemicals3,4. Among the various CO2 reduction reactions, the formation of CO is notably one of the more straightforward processes to achieve during catalysis, as it requires fewer electrons and photons compared to other carbon-containing products5,6. Notwithstanding the fact that the best technology reported to date has yielded CO with a turnover number (TON) reaching up to 100,000 per mole of catalyst, these systems generally rely on ultra-low catalyst concentration (below nanomolar), which are constrained by the extremely low concentration (far below nanomolar) of the photosensitized transient intermediates with inherently short lifespans7–10. Fine-tuning the longevity and reactivity of the sequence of photoinduced transient intermediates is crucial for optimizing efficiency and selectivity at elevated catalyst concentration, while simultaneously addressing the complexities presented by competitive side reactions (Fig. 1a)11. Schematic illustration of the kinetic enhancement strategy. a General homogeneous photocatalysis with molecular catalysts: relatively low concentration of photosensitized transient species and sluggish kinetics caused by undirected diffusion and inefficient quenching with trace transient intermediate, constrained by the quenching processes between photosensitizer (PS), catalyst (Cat), and electron donor (ED). b Our strategy: pre-incubation and supramolecular directed photocatalysis. The dashed box on the left indicates the pre‑incubation process, in which Ir(ppy)3 (IrIII) is converted to the active IrII species under light irradiation in the presence of BIH. Preorganization of photo-accumulated active intermediate with capsule for saturated enzymatic catalysis, via pre-incubation to form saturated photosensitizer-capsule clathrate, reinforcing directed photo-induced electron transfer and catalytic conversion via enzymatic kinetics. Natural photosynthesis converts carbon dioxide into energy-rich organic molecules such as sugars and carbohydrates by harnessing solar energy, providing foundational principles for photoredox catalysis12,13. Notably, there is no lack of oxidoreductases to pre-organize and incubate cofactors (e.g., NADH) around enzymatic active sites in the protein-constructed pocket for forming reactive intermediates, and pursuing exquisite selectivity and kinetic enhancement14,15. Chemists have crafted kinds of bioinspired capsules to integrate cofactors and/or photosensitizers in the confined pocket for the activation and conversion of inert molecules, including CO2 via photocatalysis16,17. We thought that incubating cofactor mimics with photosensitizer, combined with host-guest abstracting of the formed transient species, would guarantee an effective photocatalytic manifold via a saturated Michaelis conversion18–20. Considering that the opened capsules exhibited position-modified interactions and promising guest-exchanging kinetics, we envisioned that merging bio-inspired photo-incubation with dynamic, favorable enzymatic conversion would enhance substrate-product circulation with the kinetics beyond the typical concentration dependence of the transient species. Herein, we report a pre-equilibrium approach to merge commercial photosensitizer, tris(2-phenylpyridine)iridium, Ir(ppy)3, within a FeIII-porphyrin decorated lantern-shaped capsule H1 for efficient CO2 photoreduction. Our approach includes the incubation of Ir(ppy)3 and 1,3-dimethyl-2-phenyl-2,3-dihydrobenzimidazole (BIH), under visible light irradiation to form an elevated concentration of anionic IrII(ppy)321, an active transient species that always has quite a lower concentration in typical photocatalytic systems (Fig. 1b). The lantern-shaped capsule abstracts the species to form a pre-equilibrium clathrate intermediate via π-stacking and electrostatic interactions. The system efficiently facilitates the CO2-to-CO conversion with the initial rate exhibiting zero-order dependence on the concentration of both Ir(ppy)3 and BIH, overcoming the typical sluggish kinetics of photosensitization in the photocatalytic process. The positively charged characteristic and open-interacted manner endow H1, facilitating rapid Ir(ppy)3-IrII(ppy)3 exchanges via a kick-kick manner, achieving a turnover frequency of about 165 s−1, competitive with formate dehydrogenase22, and a TON of 180,000, comparable to reported CO2-to-CO photoreduction systems23–25. The approach enables efficient intramolecular C − X (X = N or S) cyclic dehydrogenation, concurrently with CO2 reduction, providing a strategy for converting high-energy-barrier reactions under mild conditions. Results and discussion Characterization of cages and host-guest species The coordination cage H1 was constructed by assembling an ortho-dicarboxylate modified FeIII-porphyrin-based ligand (denoted as H2LFe) and bis(cyclopentadienyl) zirconium dichloride in DMF/THF solution (Supplementary Figs. 1−11). X-ray structural analysis of H1 revealed a lantern-shaped capsule consisting of two C3-symmetric Cp3Zr3 (μ3-O)(μ2-OH)3 (Cp3Zr3) clusters distributed on the top and bottom, and three H2LFe ligands strategically positioned along the sides (Fig. 2a, Supplementary Data 1). H1 had a height of 21.1 Å, with an average Fe···Zr distance of 12.0 Å and an Fe···Fe distance of 15.7 Å. Crucially, the assembly features three large rhombic openings (15.7 × 16.2 Å2), readily accessible for the binding of suitable guests with high but dynamic active affinity that was favorable for fast pre-equilibrium between the association and dissociation (Supplementary Figs. 1−7)26. Electrospray ionization mass spectra analysis of H1 with an intense peak at m/z = 1720.4890 assigned to [(Cp3Zr3)2·LFe3]2+ species, exhibited high stability and integrity of H1 in solution (Supplementary Figs. 14−16). The addition of commercial photosensitizer Ir(ppy)3 into H1 solution, aroused a new peak at m/z = 2047.0673, which was assigned to the [H1·Ir(ppy)3]2+ complex species (HIr) by comparing the simulation results based on natural isotopic abundances (Fig. 2c, Supplementary Fig. 17). Structural and spectroscopic evidence for the formation of a host-guest complex. a The crystal structure of the coordination capsule H1 and b DFT optimized structure of the host-guest species HIr. Zr cyan, Fe orange, Cl green, C gray, N blue, O red, Ir yellow. c ESI-MS spectra of H1 and of H1 upon addition of Ir(ppy)3 equivalent, the insets show the measured and simulated isotopic patterns of the peaks mentioned. d UV−vis spectra of H1 (5.0 μM) solution upon addition of Ir(ppy)3 (total 3.0 μM). The inset shows the Hill plot of the titration curve at 412 nm. e Emission spectra of Ir(ppy)3 (blue line) upon addition of H1 and BIH (red line). The first arrow indicates H1 from 0 to 1 μM, the second arrow indicates BIH from 0 to 1 mM and the gray dashed line marks the emission intensity after H1 addition. The inset shows the Hill plot of the titration curve at 525 nm. UV−vis spectra of H1 (5.0 μM) solution upon the addition of Ir(ppy)3 resulted in a weakened Soret band of LFe modules on H1, and generated an isosbestic point at 420 nm. Hill plot fitting of the titration profile in a 1:1 binding model provided an association constant Kass as high as 1.33 × 105 M−1 (Fig. 2d)27. Ir(ppy)3 exhibited bright emission centered at 520 nm, and the emission intensity was quenched directly upon the addition of H1 into the solution, fitting of the titration profile gave a 1:1 host-guest complexation behavior with the association constant calculated as 1.05 × 105 M−1 (Fig. 2e, Supplementary Fig. 25)27,28. Density functional theory calculations (DFT) of the host-guest complex suggested that the Ir(ppy)3 guest spontaneously positioned at the cleft binding sites of the host (Supplementary Data 2), and was stabilized by π-stacking interactions29. Remarkably, beyond the π-stacking separation (3.26 Å) between the phenyl-pyridine moiety on Ir(ppy)3 and the porphyrin plane on H1, C–H···O hydrogen bonds (2.70 Å) between the phenyl-pyridine moiety and an oxygen atom from the zirconium clusters (Supplementary Fig. 8) were found to stabilize the complexation. This strategic interplay of the conductive π-channel enhanced the electron communication between the photosensitizer and its active reduced form for CO2 reduction30,31, while it allowed the fast pre-equilibrium between guest desorption and complexation for catalytic purposes (Fig. 2b, Supplementary Fig. 8). Cyclic voltammetry of H1 displayed three pairs of redox peaks at −0.25, −1.05, and −1.65 V (vs. Ag/AgCl), assigned to FeIII/FeII, FeII/FeI, and FeI/Fe0 couples32, respectively (Supplementary Fig. 18). Adding Et3N·HCl into the H1 solution induced a proton-reduction peak at −1.40 V (vs. Ag/AgCl) (Fig. 3a, Supplementary Fig. 19). Introducing CO2 into the H1 solution triggered the peak related to FeII/FeI couple toward the more anodic side, and exhibited that the current potential shifted with prolonged CO2 bubbling time and reached saturation after a short period (Fig. 3a, Supplementary Figs. 20, 21)33. Notably, the introduction of CO2 into the ligand LFe solution caused little variation of the potential (Supplementary Fig. 22). We deduced that the FeII/FeI couple on the capsule was able to activate CO2 through the capsule shielding effect, at the time, a suitable photosensitizer was conducted to avoid a high energy barrier for reducing the FeII/FeI couple23,24. Mechanistic investigations and catalytic performance. a Cyclic voltammetry of H1 (0.25 mM) with increasing Et3N·HCl. Inset: Linear sweep voltammograms of H1 upon bubbling of CO2. b UV−vis spectra monitoring the photoirradiated solution containing Ir(ppy)3 (0.10 mM) and BIH (50.0 mM) based on 300‑fold dilution. The inset shows the spectral variation of H1 (3.0 μM) with BIH (30.0 mM)/Ir(ppy)3 (10.0 μM) upon irradiation. c Schematic of continuous-flow photoreactor with pre-incubation. A: recirculating reaction vessel; B: KOH(sat. aq.)/CO2 scrubber; C: gas collection device (sat. KOH aq.); D: peristaltic pump; E: in-line dynamic gas-liquid mixer; F: coiled continuous-flow photo-reactor. d Time-dependent TON of H1 with/without pre-incubation. The inset compares the corresponding initial TOF. e Kinetic analysis with pre-incubation with the variation of [Ir(ppy)3] from 50 to 125 μM, f and changing [Ir(ppy)3] from 50 to 100 μM without pre-incubation under standard conditions. The insets show initial TOF versus [Ir(ppy)3] for each condition. Supramolecular catalytic performance of host We then displayed the reduction of CO2 upon addition of the electron donors into the acetonitrile solution containing Ir(ppy)3 (0.1 mM) and H1 (0.1 μM) with typical proton donor trifluoroethanol (TFE, 0.25 M) under a CO2 atmosphere, and the excess of Ir(ppy)3 ensures the saturation of the complexation species with H1. Among typical electron donors, including ascorbic acid, sodium ascorbate, triethylamine, triethanolamine, BIH (50 mM) aroused significant CO production (510 μL). Control experiments without H1, BIH, CO2, or light, respectively, manifested no CO generated (Supplementary Fig. 45, Supplementary Table 6), and a feeble catalytic performance was observed in the absence of Ir(ppy)3 or TFE. The optimized condition facilitated a turnover number (TON) of 45,000 after 30 min irradiation and an initial turnover frequency (TOF, within the first 10 min) of more than 40 s−1 for the selective CO2-to-CO conversion (Supplementary Fig. 46, Supplementary Table 6). Luminescence titration of the Ir(ppy)3 solution upon the addition of BIH demonstrated a strong emission quenching with a Stern-Volmer constant28 calculated as about 1.78 × 104 M−1, but other electron donors exhibited lower quenching constants (Supplementary Figs. 28−32, Supplementary Table 5). Time-dependent emission measurements revealed a lifetime diminishing of Ir(ppy)3 upon addition of electron donors, wherein BIH (50 mM) aroused the shortest lifetime (0.42 μs) (Supplementary Figs. 33, 34). As capsule H1 exhibited lower quenching efficiency, we attributed the high efficiency to the quenching pathway that the excited state of Ir(ppy)3, reduced by the electron donor, dominated the photocatalysis, and the reductive Ir(ppy)3 further reduced iron centers for CO2 reduction. When pre-reacting Ir(ppy)3 with BIH upon light for 15 min, no CO was observed, but the subsequent introduction of the cationic capsule H1 led to a four-fold enhancement in initial TOFCO compared to the one-pot reaction without pre-incubation (Supplementary Fig. 46, Supplementary Table 6). Under optimized conditions, about 1630 μL of CO was produced after 30 min of irradiation with >99% selectivity and an initial TOF ca. 165 s−1 based on the concentration of H1 (Fig. 3d, Supplementary Fig. 46 and Supplementary Table 6). Continuously exposing the reaction mixture for one hour generated 2075 μL CO, reaching a TON of 180,000 per H1 (amounting to 60,000 per Fe) (Supplementary Figs. 47, 50). This value represents a highly effective CO2-to-CO conversion with considerable selectivity, competitive with reported superior photocatalytic systems (Supplementary Fig. 48, Supplementary Table 16) and natural enzymes, including formate dehydrogenase (FDH, TOF: 5.6 s−1) and carbon monoxide dehydrogenase (CODH, TOF: 45 s−1)22,34. The quantum yield for CO production was determined as ΦCO = 5.8% for the optimized system with pre-incubation, compared to 1.8% under the condition without pre-incubation, highlighting the role of the incubation strategy in enhancing photon utilization efficiency. Experiments with 13C-labeled CO2 revealed a dominant signal at m/z = 29 exclusively corresponding to 13CO, confirming that CO2 was the ultimate carbon source of CO (Supplementary Fig. 49)25. We also recognized that the reaction of Ir(ppy)3 (0.1 mM) with BIH (50.0 mM) upon light irradiation aroused obvious Ir(ppy)3 emission quenching and formation of BI+ which was detected by 1H NMR assay (Supplementary Figs. 12, 27, and 40). UV−vis spectral tracing of the reaction solution exhibited that the absorbance increased at 280 nm (the characteristic band of BI+) and decreased at 310 nm (the band of BIH) with an obvious isosbestic point at 300 nm (Fig. 3b)35,36. Concomitantly, a new absorption band emerged at 528 nm (Supplementary Fig. 41), matching the reported fingerprint of the reduced IrII(ppy)3 species37, suggesting the generation of IrII with elevated concentration during the pre-incubation. The variations of the two absorbances both exhibited a linear relationship with irradiation time, and reached a plateau after 15 min (Supplementary Fig. 42). While subsequent addition of the pre-reaction mixture to H1 solution unequivocally aroused a H1-Ir(ppy)3 combination characteristic isosbestic point at 415 nm, accompanied by new absorptions corresponding to FeII and even FeI species (Fig. 3b, Supplementary Fig. 43)38, we attributed these spectral changes to the pre-reaction of Ir(ppy)3 with BIH forming enriched anionic IrII(ppy)3, which was abstracted into the pocket of cationic H1 and proceeded to reduce the FeIII center for further driving CO2 reduction39. Kinetic experiments revealed that the initial conversion rate (within 10 min) showed a first-order dependence on the TFE concentration, but a zero-order dependence on the Ir(ppy)3 concentration and BIH concentration (Fig. 3e, f, Supplementary Figs. 50−54) under standard conditions. Control experiments without pre-incubation revealed a first-order regime on the concentration of Ir(ppy)3. It is likely that this characteristic pre-activation process endowed the generation of anionic active IrII(ppy)3 species with elevated concentration, and enabled the formation of a saturated clathrate of IrII(ppy)3 with H1 via enhanced electrostatic attraction19,20. The concentration independence of the Ir(ppy)3 and the active intermediate IrII(ppy)3 delivered the sluggish kinetics of the photosensitization process that restricts the photocatalytic CO2 reduction efficiency (Fig. 3e, Supplementary Fig. 42). Control experiments of the catalytic performance of molecular Fe-porphyrin (i.e., the building block of H1, H2LFe) under identical conditions revealed significantly lower activity for CO2 reduction. The pre-incubation strategy enhanced the catalytic efficiency, but the photocatalysis kinetics of the Fe-porphyrin monomer suggested a first-order dependence of the initial rate on the Ir(ppy)3 concentration (Supplementary Figs. 55, 56). In all cases, the capsule H1 exhibited superior catalytic performance over equal amounts of the Fe-porphyrin fragment. While the pre-incubated system gradually deactivated over 1 h of catalysis, control experiments by adding fresh components after reaction for 1 h (Supplementary Fig. 57) exhibited that the fresh Ir(ppy)3 or H1 added to the solution did not arouse catalysis recovery, but the presence of fresh BIH restored approximately 39% of the initial CO production. It is likely that the photosensitizer and catalyst remained structurally intact during catalysis, and the decrease in catalytic efficiency was possibly attributed to the product inhibition effect during the rapid catalytic conversion40, in which back electron transfer from the IrII(ppy)3 to the largely generated BI+ during the CO2 reduction led to a kinetic bottleneck (Fig. 3b, Supplementary Fig. 40). We then engineered a recirculating continuous-flow photo-reactor featuring an integrated microfluidic system (Fig. 3c, Supplementary Figs. 58−60). Precise modulation of CO2 (0.8 mL·min−1) and liquid (2.0 mL·min−1) flow rates enabled a yield of 65 mL CO under standardized catalytic conditions: H1 (0.1 μM), Ir(ppy)3 (0.1 mM) with BIH (50.0 mM) in CH3CN upon a 15-min pre-incubation. Critically, this reactor achieved a TON of 362,000—surpassing tubular reactors in efficiency for 2 h irradiation. From the mechanism point of view, light incubation enabled the formation of sufficient IrII(ppy)3 species, generating a saturated IrII(ppy)3 involved clathrate with Fe-porphyrin decorated capsule, followed by the reduction of the Fe center and the reduction of CO2 into an intermediate FeIICOOH, and finally to gain a proton and ultimately generates H2O and CO (Supplementary Fig. 61)23,41. In situ Fourier transform infrared spectroscopy revealed a significantly increased signal at 1600 cm−1, which could be interpreted as a characteristic signal of the *COOH species, a common intermediate during photocatalytic CO2-to-CO processes (Supplementary Fig. 62)42. Investigation into the mechanism and scope of C–X cyclization The capability of this electron transfer mode enabled oxidative cyclizations of imine-based C − X coupling motifs to form N-substituted and S-substituted aromatic chemicals subsequently. These heterocycles are important structural motifs due to their biological and therapeutic activities. However, the preparation of benzimidazole and benzothiazole compounds from easily prepared substituted imines still faces marked challenges43. Irradiating Ir(ppy)3 (0.1 mM) with N-substituted substrate 1a ((E)−2-(benzylideneamino)aniline, 10.0 mM, Fig. 4g) under a CO2 atmosphere aroused an obvious emission quenching and the formation of a cycloaddition intermediate, which was detected by the 1H NMR tracing (Supplementary Figs. 13, 35). UV−vis spectral tracing of the reaction mixture exhibited the absorbance increase at 290 nm and decrease at 385 nm with an obvious isosbestic point at 320 nm (Fig. 4c, Supplementary Fig. 44). Notably, the analogous S-substituted substrate 2a ((E)−2-(benzylideneamino)benzenethiol) quenched the emission of Ir(ppy)3 significantly, but the O-substituted substrate 3a ((E)−2-(benzylideneamino)phenol) did not work (Fig. 4d, g, Supplementary Fig. 35). Mechanistic insights and substrate scope of the photocatalytic C − X (N, S, O) coupling. a Time tracing of the yield of the C − X coupling of substrates with different heteroatoms N, 1a; S, 2a; and O, 3a. The inset shows the normalized SWV oxidation peaks of the substrates mentioned. The dotted vertical line indicates the oxidation potential of Ir(ppy)3 for reference. b Kinetic parameter vs. Hammett σp of the intramolecular C − N coupling. The inset shows the normalized SWV of the substrates 1a − 1 f. c UV−vis spectra of 1a (10.0 mM) solution under CO2 atmosphere during pre-incubation based on 60‑fold dilution. The inset shows the time-dependent absorbance at 380 nm. d Emission quenching (λem = 525 nm) of Ir(ppy)3 with 1a/2a/3a upon light irradiation. e Emission changes of the dye-loaded capsule (10.0 μM) upon addition of 1a. The inset shows the Hill plot of the titration curve at 525 nm. f The yields of 1a under 80 and 40 mW·cm−2 light power, respectively. g Substrate scope: Intramolecular C − X (N/S) bond formation under standard reaction conditions: H1 (1.0 μM), Ir(ppy)3 (100 μM), substrate (10.0 mM). Yields were determined by 1H NMR spectra using 1,3,5-trimethoxybenzene as an internal standard. The square wave voltammetry (SWV) provided the oxidation potential about 0.45, 0.22 and 0.71 V for the N-substituted substrate 1a, S-substituted substrate 2a and O-substituted substrate 3a, respectively, and presented a positive correlation with that of the quenching efficiency (Supplementary Figs. 23, 24). We deduced a typical photoinduced electron transfer (PET) reaction from the substrate to the excited state of Ir(ppy)3, forming IrII(ppy)3 for further reduction conversion (Supplementary Fig. 36)44. Most importantly, luminescence titration of dye-loaded capsule clathrate upon addition of 1a did not recover the emission of Ir(ppy)3, but led to further quenching of the emission (Fig. 4e, Supplementary Fig. 37). It is likely that the presence of 1a could not squeeze the dye in the cavity, but enforced a close proximity to dye-loaded capsule for an enhanced molarity of reactants, therefore benefiting the further reaction acceleration17. Under optimized photocatalytic conditions, substrate 1a underwent efficient C–N cyclization to afford 4a in 82% yield, corresponding to a TON of 8200 based on H1 (Supplementary Table 17). Control experiments demonstrated that no product was detected in the absence of Ir(ppy)3, and only low yields were observed in the absence of H1, light, or TFE, respectively, confirming the necessity of each component for the cyclization reaction (Supplementary Table 18). Notably, replacing H1 with H2LFe (3.0 μM) resulted in a significantly reduced yield of 24%, highlighting the essential role of the supramolecular architecture in facilitating the cyclization. Moreover, omitting the pre-incubation step also led to a decreased yield (37%), indicating that pre-generation of the active IrII species is beneficial even for the cyclization. When 2-NH2 substituted imine derivative substrates with different functional groups were used, the dehydrogenated C − N coupling took place, and the product yield was enhanced with electron-donating groups, but diminished when electron-withdrawing groups were present. The square wave voltammetry revealed that, compared to the unsubstituted substrate 1a (R = H), electron-donating groups caused a cathodic shift of the oxidation potential, while electron-withdrawing groups caused an anodic shift. Hammett plot suggested a statistically negative linear correlation between Hammett substituent constant σp values and substrate conversion (Fig. 4b, Supplementary Fig. 63)45, reflecting that the electronic effects governed the electron transfer process. This trend was mechanistically consistent with the reductive quenching pathway, wherein electron-donating groups boosted the quenching efficiency (Supplementary Fig. 64), enhancing the thermodynamic driving force for the electron communication between substrates and photosensitizers46. When 2-SH substituted imine derivative substrate 2a (prepared in situ by mixing the aldehyde and amino compound) was chosen, the oxidation potential of the 2a involved clathrate was around 0.22 V (vs Ag/AgCl), which was the lowest among these imine substrates and led to the most efficient C − S coupling. Alternatively, the C − O coupling hardly took place when 2-OH substituted imine derivative substrate 3a was used (Fig. 4a, Supplementary Fig. 65). We then inferred that the formation of substrate-involving clathrate was important to trigger the chemical conversion, and the oxidation potential of the substrate involving transition controlled the yield of the chemical conversion. With the photon power energy increased from P1 = 40 mW·cm−2 to P2 = 80 mW·cm−2, we found a 4.1-fold increase in the 4a yield, showing a quadratic relationship dependence of the initial rate of the 1a oxidation on different photon power (Fig. 4f, Supplementary Fig. 66). These results suggested a combination of the two photons energy to successively drive two one-electron transfer per catalytic cycle: the first PET triggered the initial ring-forming reaction, while the second PET dehydrogenated the cyclized intermediate. In all cases, the IrII(ppy)3 species reduced the Fe-porphyrin site for CO2 reduction47. The efficient dual-photon process validates our strategy: the pre-incubation protocol ensures a high concentration of IrII(ppy)3, while the capsule H1 serves as a versatile platform that manages sequential electron transfers for concurrent conversions. Collectively, a paradigm by merging bioinspired incubation with dynamic favorable enzymatic conversion was developed to overcome challenges of sluggish photo-sensitization kinetics for CO2 photoreduction, delivering efficient CO2-to-CO conversion with competitive metrics (>165 s−1 TOF, >99.9% selectivity). This seamless lab-to-process translation underscores the industrial viability of integrating enzymatic kinetics with light incubation for overcoming persistent energy barriers in challenging transformations. Methods Reagents and materials All reagents were purchased and used directly without further purification unless otherwise specified. 1,3-dimethyl-2-phenyl-2,3-dihydrobenzimidazole (BIH, 97%), tris(2-phenylpyridine)iridium(III) (Ir(ppy)3, 98%), 2,2,2-trifluoroethanol (TFE, 98%), pyrrole (99%), and benzaldehyde (99%) were all purchased from Anhui Senrise Technologies Co., Ltd. (Energy Chemical). Methyl p-formylbenzoate (98%) was purchased from Bide Pharmatech Co., Ltd. Bis(cyclopentadienyl) zirconium dichloride (98%) was purchased from Accela ChemBio Co., Ltd. Hydrochloric acid (37%) and KOH ( ≥ 85%) were purchased from Sinopharm Chemical Reagent Co., Ltd., and iron(II) chloride tetrahydrate (FeCl2·4H2O, 98%) was purchased from Alfa Aesar Co., Ltd. Propionic acid (≥99.5%), trichloromethane (CHCl3, 99%), methanol (≥99.5%), ethanol (≥99.7%), diethyl ether (99.5%), and petroleum ether (99.5%) were all purchased from Nanjing Chemical Reagent Co., Ltd. Tetrahydrofuran (THF, 99.9%), N,N-dimethylformamide (DMF, >99.5%), dichloromethane (CH2Cl2, 99.9%), 1,3,5-trimethoxybenzene (98%), o-phenylenediamine (98%), 2-aminophenol (99%), 2-aminothiophenol (97%), acetonitrile (CH3CN, ≥99.9%), 4-fluorobenzaldehyde (98%), 4-chlorobenzaldehyde (97%), 4-(tert-butyl)benzaldehyde (97%), 4-methoxybenzaldehyde (99%), and 4-methylbenzaldehyde (98%) were purchased from Anhui Senrise Technologies Co., Ltd. (Energy Chemical). CO2 and Ar were purchased from Nanjing Special Gas Factory Co., Ltd. General methods and instrumentation The crystal data were collected on the Bruker D8 Venture X-ray diffractometer in Bruker AXS, Germany. The emission spectra were measured on the Horiba FL-3 fluorescence spectrophotometer at room temperature. The emission lifetimes were measured employing time-correlated single-photon counting on an Edinburgh FLS1000 instrument. Ultraviolet−visible (UV−vis) data were collected by a Shimadzu UV3600 spectrometer. A typical three-electrode system was used to collect electrochemical data on a CHI 760 F electrochemical workstation. Nuclear magnetic resonance (NMR) data were obtained on a Bruker Avance Ⅲ 400 M spectrometer, and the peak frequency was based on the internal standard (tetramethylsilane, TMS) shift of 0.0 ppm. Electrospray ionization mass (ESI-MS) spectra were obtained by a Thermo Fisher Q Exactive mass spectrometer, and methanol or acetonitrile was used as the mobile phase with a flow rate of 0.20 mL·min−1. The gas chromatography data were obtained by a Techcomp GC 7900 gas chromatograph. In situ FTIR experiments were conducted on a Nicolet IS50-FTIR spectrometer (Thermo Scientific) equipped with a mercury cadmium telluride detector and a custom-designed gastight reaction cell. Isotopically labeled reaction products were analyzed by gas chromatography-mass spectrometry (GC-MS, QP2020N, Shimadzu Corporation) equipped with a high-sensitivity quadrupole mass analyzer. The continuous-flow photoreactor system was engineered with technical support from Beijing Roger Tech, Ltd., featuring an integrated helical microfluidic module constructed from fluorinated ethylene propylene (FEP) tubing (standard o.d. 1.6 mm, i.d. 0.8 mm; residence volume: 8 mL). All schematics, structural figures, and chemical structures were prepared using Microsoft PowerPoint (basic shapes), Diamond, Origin, and ChemDraw, all licensed for commercial publication. Synthesis of ligand LFe Compound LH (0.17 g, 0.24 mmol; for synthesis see Supplementary Information, Section 1) and FeCl2·4H2O (0.48 g, 2.4 mmol) were dissolved in DMF (80 mL). The reaction mixture was heated at 130 °C for 12 h under a nitrogen atmosphere. After cooling to room temperature, the solvent was removed in vacuo. The crude product was washed with warm water (50 °C) until the filtrate was colorless and dried in vacuo. The resulting purple solid was dissolved in methanol, filtered, and concentrated in vacuo to afford LFe as a purple solid (0.15 g, 78.3%). ESI-MS: calculated for C46H27ClFeN4O4 [LFe − H]−, m/z = 790.11, found: 790.11. Elemental analysis data: Anal. Calcd. for C46H27ClFeN4O4: C, 69.76; H, 3.44; N, 7.07. Found: C, 69.67; H, 3.53; N, 7.19. Synthesis of metal-organic capsule H1 Cp2ZrCl2 (0.04 mmol, 11.7 mg) was dissolved in H2O (0.3 mL) under ultrasonication for 10 min. To this solution was added a mixture of ligand LFe (0.02 mmol, 15.9 mg) in DMF (2.0 mL) and THF (1.0 mL). After additional ultrasonication (10 min), the reaction mixture was heated at 65 °C for 12 h. Upon cooling to room temperature, the product was washed with DMF, affording purple block-shaped crystals H1. The crystals were subsequently washed with Et2O and dried in vacuo for a yield of 60.6%. ESI-MS: calculated for C168H115N12O20Zr6Fe3Cl3 [H1]2+, m/z = 1720.4902, found: 1720.4905. Elemental analysis data: Anal. Calcd. for C174H128N14O22Zr6Fe3Cl5 (H1 + 2Cl− + 2C3H7NO): C, 52.04; H, 3.21; N, 4.88. Found: C, 52.46; H, 3.58; N, 5.11. Crystal data for H1 C174H128N14O22Zr6Fe3Cl5, Mr = 3659.02, dark-purple block, monoclinic, space group C2/c, a = 37.093(2) Å, b = 29.5954(17) Å, c = 23.5846(13) Å, V = 25254(2) Å3, α = 90°, β = 102.725(3)°, γ = 90°, Z = 4, μ(Cu-Kα) = 4.147 mm−1, T = 193 K. R reflections [Rint = 0.0887]. Final R1 [with I > 2σ(I)] = 0.0597, wR2 (all data) = 0.1509. CCDC No. 2454987. General method of UV−vis absorption spectra and emission spectra tests UV−vis and emission spectra were acquired in custom 1.0 cm × 1.0 cm quartz cuvettes sealed with a septum, containing a sample volume of 3.0 mL. The sample solution was saturated by bubbling with CO2 or Ar for 10 min to rigorously exclude oxygen. A micro stir bar was placed inside the cuvette prior to measurements, followed by the addition of analytes via a microsyringe. General method of electrochemical measurements Electrochemical measurements were performed in a standard three-electrode cell comprising a glassy carbon working electrode, an Ag/AgCl reference electrode (3.0 M KCl), and a Pt wire counter electrode (0.5 mm diameter), containing an electrolyte volume of approximately 5.0 mL. Prior to each measurement, the working electrode was thoroughly polished with 0.05 μm alumina powder on a polishing cloth. The electrolyte was a freshly prepared 0.10 M solution of TBAPF6 in anhydrous DMF or CH3CN, which was saturated by bubbling with CO2 or Ar for 10 min. Gas flow was maintained throughout experiments, with bubbling between scans and solvent blanketing during scans. All cyclic voltammograms were recorded at a scan rate of 100 mV/s unless otherwise stated. All potentials are reported as measured versus Ag/AgCl (3.0 M KCl) without iR correction. General method of gas phase test Gas-phase analysis was performed using a Techcomp GC 7900 gas chromatograph to quantify carbon monoxide (CO) generated from the photocatalytic reduction of carbon dioxide (CO2) in the photoreactor headspace. The system employed nitrogen as the carrier gas and a 0.6 m × 3.0 mm (i.d.) 5 Å molecular sieve column for separation. Hydrogen (H2) was detected via a thermal conductivity detector (TCD) operated at 100 °C, while CO and hydrocarbons were analyzed using a flame ionization detector (FID) coupled with a methane conversion unit. The injector port and chromatographic oven temperatures were maintained at 200 °C and 60 °C, respectively. In situ FTIR spectra experiment The catalyst was uniformly dispersed as a thin film on a substrate mounted at the focal point of the reaction chamber. Prior to initiating catalysis, the system underwent rigorous purging with high-purity N2 (30 mL·min−1) to eliminate the gases in the cell and the adsorbed species on the catalyst surface. Subsequently, a continuous CO2 stream (99.999%) was introduced to establish a well-defined CO2-dominated reactive atmosphere. Dynamic surface processes and transient intermediates were probed in real time by synchronizing mercury cadmium telluride detector-based time-resolved spectral acquisition with controlled photoexcitation conditions during photocatalytic reduction. General method of 1H NMR yield determination The yields of photocatalytic cyclization products were determined by 1H NMR spectroscopy using 1,3,5-trimethoxybenzene as an internal standard. At each designated time point (typically at 20 min intervals), a 300 μL aliquot was extracted from the photocatalytic reaction mixture (initial substrate concentration 10.0 mM) using a long-needle gastight syringe. From this aliquot, 200 μL was transferred to a 1.5 mL mass spectrometry vial. To this sample, 200 μL of a 10.0 mM stock solution of 1,3,5-trimethoxybenzene in acetonitrile was added as an internal standard. The mixture was then evaporated to dryness under reduced pressure at room temperature using a rotary evaporator with slow rotation to ensure gentle evaporation. The dried residue was redissolved in 600 μL of deuterated solvent (DMSO-d6 for benzimidazole products 4a–4f; CDCl3 for benzothiazole products 5a–5f) and transferred to a 5 mm NMR tube. 1H NMR spectra were recorded on a Bruker Avance III 400 MHz spectrometer. Yields were calculated by comparing the integral of a characteristic product peak to the integral of the internal standard signal. Experimental parameter computational formulas Turnover number, turnover frequency, and product selectivity were calculated as follows: Where nproduct and ncatalyst represent the molar amounts of the target product and catalyst, respectively. TOF represents turnover frequency, TON represents the turnover number, t represents the time of reactions. Where ntarget is the molar amount of the desired product, and ntotal corresponds to the total molar amount of all products. TON and TOFmax were determined under optimal conditions as follows: (Note: Gas volume converted to moles via standard molar volume at standard temperature and pressure (STP); catalyst concentration scaled to total moles in 5 mL volume) (Peak rate derived from initial 10-min activity; units standardized to h−1) Calculation for quantum yield For a typical photocatalytic reaction under monochromatic LED irradiation (λ = 420 nm), the light intensity (measured by a calibrated optical power meter) was measured to be 80 mW·cm−2 with an illuminated area of 5.0 cm2 (cross-sectional area of the quartz reactor), giving a total incident power of 0.4 W. The photon energy at 420 nm was calculated using the Planck constant (6.626 × 10−34 J·s) and speed of light (3.0 × 108 m·s−1). Over the 30 min irradiation period, the total incident energy was 720 J, corresponding to 1.521 × 1021 incident photons (2.526 × 10−3 mol). CO production was quantified by GC analysis as described in Section 1.2. For the system with pre-incubation, 1630 μL of CO was produced, corresponding to 7.28 × 10−5 mol (based on the standard molar volume of 22.4 L·mol−1 at STP). The quantum yield (QY, Φ) was calculated according to the equation: Where nCO is the moles of CO produced, and Nphotons is the total number of incident photons during the irradiation period. The factor of 2 accounts for the two electrons required to reduce CO2 to CO. Under optimized conditions with pre-incubation, ΦCO was determined to be 5.76 ± 0.39%. For the system without pre-incubation (508 μL CO, 2.27 × 10−5 mol), ΦCO was 1.80 ± 0.17%. All measurements were performed in triplicate. General methods for the catalytic CO2 reduction Photocatalytic CO2 reduction experiments were performed in septum-sealed 15 mL quartz reactors equipped with a magnetic stir bar and water cooling. A standard reaction contained BIH (56.0 mg, 50.0 mM), trifluoroethanol (TFE, 90.0 μL, 0.25 M), and tris(2-phenylpyridine)iridium(III) (Ir(ppy)3, 0.10 mM) in CH3CN solution (4.91 mL). The reactor was sealed with a rubber plug and purged with CO2 for 20 min. The mixture was pre-irradiated (420 nm LED) under vigorous stirring at 25 °C for 15 min photoactivation prior to catalyst injection (named incubation). After activation, H1 (10.0 μL, 0.05 mM in methanol) was injected through the septum with a microsyringe. Headspace gas (100.0 μL aliquots) was periodically sampled using a gastight syringe and analyzed by GC-FID. Control experiments under identical conditions with Ar-purged systems confirmed CO2 as the exclusive carbon source (no CO detected). Control experiments with 13CO2 further confirmed the exclusive derivation of CO from carbon dioxide, as evidenced by the detection of 13CO (m/z = 29) via GC-MS. General procedure for photocatalytic oxidative cyclization All photocatalytic reactions were conducted under irradiation from blue LEDs (λ = 420 nm) and maintained at 25 °C through a circulating water bath. Reaction progress was quantitatively monitored by 1H NMR spectroscopy (400 MHz) with periodic sampling (200 μL aliquots withdrawn at 20 min intervals) using 1,3,5-trimethoxybenzene as an internal standard. Spectral analysis enabled the determination of oxidative cyclization product formation efficiency, with all 1H NMR measurements performed immediately after sample collection to ensure analytical fidelity. The C–X (X = O, N) coupling reaction was conducted in septum-sealed 15 mL quartz reactors equipped with a magnetic stir bar and water cooling. A solution of 2-substituted imine derivatives (10.0 mM, −OH or −NH2), Ir(ppy)3 (0.10 mM) and TFE (0.25 M) in CH3CN solution (5.0 mL) was degassed by CO2 purging 20 min. The mixture was photo-incubated upon 420 nm LED irradiation (15 min). H1 was then injected, and the irradiation was continued for 2 h. After the reaction, the products (4a–4f) were washed with chloroform, filtered, dried under vacuum, and dissolved in DMSO-d6 for 1H NMR analysis. The C–S coupling reaction followed the above procedure using substituted 2-aminothiophenol (10.0 mM) and benzaldehyde derivative (10.0 mM) as substrates. After the mixture was photo-incubated (15 min, vigorous stirring), H1 was subsequently injected, and continuously irradiated for 2 h. After completion, the products (5a–5f) were purified by flash column chromatography (2% EtOAc/hexane), dried under vacuum, and dissolved in CDCl3 for 1H NMR analysis. All yields are NMR yields determined by the internal standard method before isolation. Isolation was performed only for product characterization. Supplementary information Supporting Information Description of Additional Supplementary Files Supplementary Data 1 Supplementary Data 2 Transparent Peer Review file Source data Source Data Acknowledgments We thank Prof. Yue Zhao from Nanjing University for the crystal analysis. Author contributions C.Y.D. and J.K.C. conceived the project, designed the experiments and supervised the work. X.X. carried out the main experiments, collected and interpreted the data, and wrote the original draft. Q.J.G. offered help in the experiments and data analysis. P.W. performed the DFT calculations. C.Y.D. contributed materials and analysis tools. X.X., J.K.C., and C.Y.D. cowrote the paper. All authors discussed the results and commented on the manuscript. Peer review Peer review information Nature Communications thanks Jia-Wei Wang, Zhiji Han, Shigeyuki Masaoka, who co-reviewed with Phurinat Lorwongkamol and the other anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available. Funding This work was supported by the National Natural Science Foundation of China (92361201, 22201129, and 22571148), China Post-doctoral Science Foundation (2022M711550), Jiangsu Funding Program for Excellent Postdoctoral Talent (2022ZB26), and Shanghai Synchrotron Radiation Facility, instrument BL18U1 (proposal 2023-NFPS-PT-500404). Data availability The authors declare that the data supporting the manuscript are included in the manuscript, supplementary information, and supplementary data. The X-ray crystallographic coordinates for the structures reported in this article have been deposited at the Cambridge Crystallographic Data Center under the deposition number CCDC 2454987. The data can be obtained free of charge from the Cambridge Crystallographic Data Center via http://www.ccdc.cam.ac.uk/data_request/cif. The corresponding CIF and checkCIF files are also provided in Supplementary Data 1. The DFT optimized atomic coordinates of H1 and the host-guest complex HIr are provided in Supplementary Data 2. Source data are provided with this paper. Competing interests The authors declare no competing interests. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Contributor Information Junkai Cai, Email: jkcai@nju.edu.cn. Chunying Duan, Email: cyduan@dlut.edu.cn. Supplementary information The online version contains supplementary material available at 10.1038/s41467-026-74284-6. References Associated Data Supplementary Materials Supporting Information Description of Additional Supplementary Files Supplementary Data 1 Supplementary Data 2 Transparent Peer Review file Source Data Data Availability Statement The authors declare that the data supporting the manuscript are included in the manuscript, supplementary information, and supplementary data. The X-ray crystallographic coordinates for the structures reported in this article have been deposited at the Cambridge Crystallographic Data Center under the deposition number CCDC 2454987. The data can be obtained free of charge from the Cambridge Crystallographic Data Center via http://www.ccdc.cam.ac.uk/data_request/cif. The corresponding CIF and checkCIF files are also provided in Supplementary Data 1. The DFT optimized atomic coordinates of H1 and the host-guest complex HIr are provided in Supplementary Data 2. Source data are provided with this paper.