Aggregation operators based on interval-valued Fermatean fuzzy linguistic sets for medical waste disposal planning Authors: Serdar Kuzu, Murat Kirişci, Ali Kablan, Volkan Öngel, Ismail Erkan Çelik Published: 2026 ABSTRACT AbstractThis study introduces a novel decision-making framework based on interval-valued Fermatean fuzzy linguistic sets, a new theoretical model designed to capture linguistic uncertainty, interval-valued hesitation, and Fermatean membership characteristics simultaneously. The primary objective is to construct the mathematical foundations of interval-valued Fermatean fuzzy linguistic sets, develop corresponding aggregation operators, propose a new score function, and formulate a complete multi-criteria decision-making algorithm. The research begins by defining interval-valued Fermatean fuzzy linguistic sets and exploring their fundamental algebraic and ordering properties. Several aggregation operators (Weighted Aggregation and Geometric Weighted; Ordered Weighted Average and Ordered Geometric Weighted; Generalized Weighted Averaging and Generalized Weighted Geometric; Generalized Ordered Weighted Averaging and Generalized Ordered Weighted Geometric; and Linguistic Hybrid) tailored to the interval-valued Fermatean fuzzy linguistic structure are proposed, and their properties are rigorously proven. A novel score function is introduced to provide a meaningful ranking mechanism for interval-valued Fermatean fuzzy linguistic evaluations. Building on these components, a new multi-criteria decision-making algorithm is developed. The algorithm is applied to selecting medical waste disposal techniques, a domain characterized by high uncertainty and conflicting criteria. The robustness of the results is examined using the interval-valued Fermatean fuzzy-COPRAS method, and comparative analyses are conducted with previously established fuzzy multi-criteria decision-making approaches. A comprehensive sensitivity analysis is also performed to validate the stability of the proposed framework. The empirical results indicate that the proposed interval-valued Fermatean fuzzy linguistic-based multi-criteria decision-making framework effectively handles linguistic imprecision and interval-valued hesitation, producing reliable and interpretable rankings. For the medical waste disposal problem, the final ranking is obtained as follows: . Robustness and sensitivity analyses confirm the stability of the ranking across different parameter settings and weighting schemes. Comparative results show that the proposed method provides more consistent and resilient outcomes than traditional fuzzy and classical decision-making models. The study enriches the fuzzy multi-criteria decision-making literature by establishing a robust framework for managing complex linguistic uncertainty in real-world decision-making scenarios.Keywords: Interval-valued Fermatean fuzzy linguistic set, Aggregation operator, COPRAS, Robustness analysis, Medical waste disposal management, Decision-making.Subject terms: Engineering, Mathematics and computing Introduction Medical waste refers to waste generated in healthcare facilities that can pose risks to human health and the environment. The basic categories shown in Fig. 1 are: Classification of medical wastes. 1. Infectious Waste: Waste that carries the risk of microorganisms and transmitting disease. Risks of infectious waste include outbreaks and healthcare worker infections. 2. Pathological Waste: Biological materials such as human or animal tissues, organs, and amputation fragments. Risks of this type of waste include biological contamination, ethical issues, and hygiene concerns. 3. Sharps Waste: Waste that can cause injury, such as needles, scalpels, and broken glass ampoules. Risks of sharps waste include puncture wounds and bloodborne transmission (Hepatitis, HIV, etc.). 4. Pharmaceutical Waste: Expired or unused medications and drug residues. Risks include water and soil pollution, as well as antibiotic resistance. 5. Chemical & Toxic Waste: Chemicals used in hospitals, disinfectants, substances containing heavy metals, etc. Risks include poisoning and environmental toxicity1. 6. Radioactive Waste: This refers to waste containing radioactive material generated during nuclear medicine and radiology procedures. Risks include radiation exposure and long-term environmental damage. The purpose of this classification is to ensure that the appropriate and safe disposal method is selected for each type of waste, as each has a different risk profile. Figure 1 shows the classification of medical waste, and Fig. 2 shows the disposal/processing strategies that can be applied to this waste2,3. Waste strategies. In Fig. 2, the “Waste Strategies” section generally refers to alternative disposal methods. The alternatives selected in this study using COPRAS are based on this. The most common strategies are: (A) Incineration: Waste is burned at high temperatures to reduce volume and eliminate pathogens. Advantages include eliminating the risk of infection and significantly reducing volume. Disadvantages include the potential formation of harmful gases such as dioxins/furans, as well as high investment and operating costs4. (B) Autoclaving: Sterilization is performed using pressurized steam. It is generally suitable for infectious waste. The advantages of this technique include its lower environmental impact compared to incineration and its ability to provide safe sterilization. The disadvantages are its limitations in pathological or chemical waste and the need for subsequent shredding/transportation of the waste. (C) Chemical Disinfection: Waste is purified from microorganisms using chemical substances. Advantages include its effectiveness for some liquid wastes and its relatively low cost. In contrast, disadvantages include the potential for chemical residues to harm the environment and the suitability of the system for all waste types. (D) Landfilling: Waste is buried in regulated landfill sites. The advantage is that it is simple and relatively inexpensive. The disadvantage is the risk of long-term environmental pollution and its unsuitability for infectious and toxic waste. Figures 1 and 2 support the study’s basic logic. Since waste types differ, their risks also differ. Because the risks differ, the criteria have different levels of importance. Therefore, the decision problem becomes a multi-criteria structure. The most appropriate strategy is selected using methods like COPRAS5–7. Due to its numerous criteria and possibilities, a MW method selection challenge may be categorized as a MCDM problem. However, experts who evaluate these kinds of problems can only evaluate the qualitative norms linguistically. MCDM techniques transform these judgments into a numerical structure, even though fuzzy logic can manage the ambiguity in these verbal words8. Psychology, philosophy, cognitive science, artificial intelligence, and other disciplines investigate human reasoning and judgment in real-world settings. Various mathematical and statistical models typically define these processes; DM becomes increasingly important. Behavior management identifies and improves behaviors an individual or organization needs to achieve a goal. According to the study, many real-life decisions may be made without conscious thought, while difficult and significant ones require more consideration and work. MCDM uses discrete scenarios with well-defined and constrained options. For MCDM problems, the number of solutions is predetermined. MCDM techniques–such as rating, comparing, and choosing possibilities–are commonly applied when making decisions. These techniques are commonly chosen because they allow for rapid DM without the need for complex package software or mathematical calculations. There is only one goal that the MCDM technique can achieve.The purpose is to solve the choice issue as favorably and inexpensively as possible8. Abbreviations for the key definitions and concepts used throughout the study are given in Table 1. Table 1Abbreviations.AbbreviationDescriptionAbbreviationDescriptionMWMedical WasteIVFFSinterval-valued Fermatean fuzzy setMCDMMulti-criteria decision-makingFFLSFermatean fuzzy linguistic setmembership degreeIVFFLSinterval-valued Fermatean fuzzy linguistic setnon-membership degreeIVFFLNinterval-valued Fermatean fuzzy linguistic numberFSFuzzy setIVFFLWAIVFFL weighted average operatorIFSIntuitionistic fuzzy setIVFFLGWIVFFL geometric weighted operatorPFSPythagorean fuzzy setIVFFLOWAIVFFL ordered weighted average operatorFFSFermatean fuzzy setIVFFLOWGIVFFL ordered weighted geometric operatorLSFlinguistic scale functionGIVFFLWAgeneralized IVFFLWA operatorLTSlinguistic term setGIVFFLGWgeneralized IVFFLGW operatorLIFSlinguistic intuitionistic fuzzy setIVFFLHAIVFFL hybrid weighted average operatorFFLTSFermatean fuzzy linguistic term setIVFFLHGIVFFL hybrid weighted geometric operatorIVIFSinterval-valued intuitionistic fuzzy setGIVFFLHAgeneralized IVFFL hybrid weighted average operatorIVPFSinterval-valued Pythagorean fuzzy setGIVFFLHGgeneralized IVFFL hybrid weighted geometric operator Abbreviations. Motivation FFSs are a more flexible extension of classical FSs and PFSs. If and are expressed as intervals rather than single values, an IVFFS is obtained. Linguistic sets, on the other hand, convert linguistic terms (low, medium, high) into numerical form, and this conversion is done not as a single value but as a range of values. If we examine IVFFLSs, we see that these sets are a combination of linguistic variables with a Fermatean structure. IVFFLSs can model uncertainty more flexibly because they simultaneously represent both linguistic uncertainty and Fermatean flexibility. Thanks to the requirement of , they can capture decision-makers’ uncertainty across wide ranges, thus enhancing the level of hesitation. Because different assessments from different experts can be easily integrated across intervals, they are well-suited for group decisions. These explanations form the primary motivation for our study of IVFFLSs. In addition, although FFLSs have been studied, the lack of IVFFLSs is also an important source of motivation. Concerns regarding human and animal health are reasonable, given the world’s growing population and the rise of pandemic diseases9. One of these difficulties is the proper disposal of the enormous amounts of waste generated by medical establishments such as hospitals and laboratories. Managing the MW generated by healthcare facilities’ operations is one of the most serious difficulties they confront worldwide10. Given the contagious nature of MW, improper disposal of various hazardous goods, such as used Personal Protective Equipment and needles, can be risky. Inadequate management of MW can significantly endanger the community and hasten the spread of numerous pandemic diseases. It is important to think carefully about the issue of MW elimination in this scenario11. This motivation stems from applying the algorithm derived from the new clusters and the aggregation operators to be developed in this study to MW disposal planning. Necessity FFS play a vital role in various fields, as it is an advantageous and powerful concept for dealing with uncertain information. Combining FFSs with interval-valued linguistic sets can model the “uncertainty” in human judgments, and decision-makers’ evaluations often cannot be reduced to a single point; uncertainty is more accurately represented as an interval. It would be beneficial to define a new interval-valued linguistic set and its aggregation operators that will more realistically reflect uncertainty, enhance flexible interpretation, and provide better group decision support. Municipal authorities have struggled in recent years to choose the most appropriate MW disposal strategy to handle MW properly, particularly in developing countries. It is possible to frame this process as a MCDM problem, which entails evaluating many tangible and intangible criteria for MW disposal alternatives and choosing the optimal technique. However, there are two main challenges in DMs on MW disposal plans: (a) The research’s basis is how to characterize this data because the evolution of MW disposal planning has left decision information ambiguous. Determining objective DMs, allocating attribute weights, and considering decision-makers preferences are critical steps in the MW disposal decision-making process. (b) Even though the multicollinear problem has evolved, the number of variables, attributes, and decision-makers has increased, which must be addressed12. MW disposal is a complex process. Healthcare personnel need help because there are multiple regulatory bodies, different kinds of waste, and different threats. It should be noted that regulatory bodies are always looking for solutions to management concerns and problems related to MW disposal13. These questions are fundamental: How can we prevent these dangers? How do we overcome the difficulties in avoiding dangers? Even though there is research on MW disposal planning, the subject’s sensitivity and significance calls for reexamining these studies. It is evident from the data gathered from the literature that healthcare workers require a solid, dependable, and valuable scientific framework that can manage highly complicated uncertainties. Particularly in developing countries, a group of hospital managers, a chief physician, and physicians –most of whom lack expertise in MW management–uses their subjective judgments and opinions to assess the logistical service providers. To stay within their allotted annual budget, hospital management primarily considers economic and financial factors14. As a result, choices about how to dispose of MW might not always be logical and reasonable. Furthermore, practitioners frequently base their conclusions on incomplete and inaccurate information under real-world circumstances. A committee of hospital managers, doctors, and a chief physician–most of whom are not experts in MWe management–evaluates the logistical service providers, particularly in poor nations, using their subjective assessments and opinions. As a result, choices about how to dispose of MW may not always be logical and reasonable. Furthermore, practitioners frequently base their conclusions on incomplete and inaccurate information under real-world circumstances. Research question: Can a successful and innovative MCDM method be created in MW disposal planning? Can a new, novel, integrated, MCDM model based on IVFFSs be created for processing Fermatean fuzzy linguistic information? Originality The environment, employees, patients, and the general public can all be impacted by the MW produced by healthcare services. One of the most important decisions healthcare companies must make is how to dispose of MW. This problem is made more difficult by several conflicting demands and choices. Experts in DM could feel self-conscious when evaluating these options. This research presents new fuzzy-type MCDM techniques for evaluating MW disposal alternatives. For the approach, IVFFLS is identifed, and new operators are developed. The essential characteristics of the defined IVFFLSs and comparison laws were investigated, and score and accuracy functions were determined. Additionally, MCDM processes based on IVFFLS have been developed. An algorithm is presented by giving a scenario explaining the concept of MCDM in IVFFLS. Research gap Various types of linguistic sets exist in the literature. The FFLS has been defined and studied in multiple contexts. While interval-valued linguistic sets exist, IVFFLSs have not been reported in the literature. IVFFLSs need to be added to the literature. We must provide their aggregation operators and score-accuracy functions and prove their fundamental properties. Choosing a suitable and efficient treatment technology is essential in managing MW, which can be considered a classic MCDM problem. Handling MW is a significant problem, particularly in underdeveloped nations. In this situation, selecting the optimal management technology is complex and unresolved. MW can be disposed of in several ways. It is crucial to evaluate which of the options is the finest. Many factors such as economic, public health, technological, psychological, environmental and operational should all be considered while evaluating each option. Choosing the optimal solution for treating MW is a challenging MCDM problem with various qualitative and quantitative aspects. The suggested methodology tackles the pressing problem of MW disposal planning. This work uses score-accuracy functions based on IVFFLSs and aggregation operations to rate candidates, estimate the associated uncertainty, and maximize their benefits. The approach established by this study attempts to address the research problems that we see as the following gaps: 1. Which standards will be applied when evaluating the efficacy of the techniques employed in planning MW disposal? 2. Is using IVFFLSs the best option for eliminating MW? 3. Is the MCDM approach, which uses IVFFLS to effectively display fuzzy information, appropriate for resolving the healthcare waste technology selection problem? 4. How consistent are the results in comparison to other well-known MCDM techniques? We describe a novel integrated FF-based MCDM technique incorporating linguistic term sets and aggregation operators to handle the aforementioned issues accurately. Contribution This study proposes a novel, integrated multi-criteria decision-making (MCDM) framework for medical waste (MW) disposal planning in highly uncertain, linguistic evaluation environments. Although fuzzy linguistic sets and their extensions have been widely investigated, existing approaches generally represent uncertainty through linguistic terms, interval-valued uncertainty, or advanced fuzzy membership structures. However, a systematic decision-making framework that simultaneously incorporates linguistic assessment, interval ambiguity, and the Fermatean fuzzy membership–nonmembership structure remains limited. To address this gap, this paper introduces an interval-valued Fermatean fuzzy linguistic environment and develops a complete decision-support model. The significant contributions of this work are summarized as follows: Introduction of a new uncertainty representation model (IVFFLS). This study formally defines the Interval-Valued Fermatean Fuzzy Linguistic Set (IVFFLS), which integrates linguistic term sets with interval-valued Fermatean fuzzy membership and nonmembership degrees. This representation provides a richer uncertainty space compared with classical fuzzy linguistic sets, intuitionistic fuzzy linguistic sets, and Pythagorean fuzzy linguistic sets, since it preserves expert hesitation and ambiguity through interval bounds while benefiting from the extended expressive capability of the Fermatean structure. Introduction of a new uncertainty representation model (IVFFLS). This study formally defines the Interval-Valued Fermatean Fuzzy Linguistic Set (IVFFLS), which integrates linguistic term sets with interval-valued Fermatean fuzzy membership and nonmembership degrees. This representation provides a richer uncertainty space compared with classical fuzzy linguistic sets, intuitionistic fuzzy linguistic sets, and Pythagorean fuzzy linguistic sets, since it preserves expert hesitation and ambiguity through interval bounds while benefiting from the extended expressive capability of the Fermatean structure. Development of comparison mechanisms suitable for IVFFLS. To enable meaningful ranking and decision analysis in the IVFFLS environment, this study establishes appropriate operational rules and comparison laws. These mechanisms ensure that IVFFLS information can be processed consistently and converted into interpretable decision outputs. Development of comparison mechanisms suitable for IVFFLS. To enable meaningful ranking and decision analysis in the IVFFLS environment, this study establishes appropriate operational rules and comparison laws. These mechanisms ensure that IVFFLS information can be processed consistently and converted into interpretable decision outputs. Proposal of novel aggregation operators for interval-valued Fermatean linguistic information. Unlike existing aggregation operators developed for conventional fuzzy linguistic models, this study develops new IVFFLS-based aggregation operators that can simultaneously handle linguistic assessments, interval uncertainty, and Fermatean membership relations. These operators allow expert judgments to be combined without losing hesitancy information, which is essential for risk-oriented decision-making problems such as MW disposal planning. Proposal of novel aggregation operators for interval-valued Fermatean linguistic information. Unlike existing aggregation operators developed for conventional fuzzy linguistic models, this study develops new IVFFLS-based aggregation operators that can simultaneously handle linguistic assessments, interval uncertainty, and Fermatean membership relations. These operators allow expert judgments to be combined without losing hesitancy information, which is essential for risk-oriented decision-making problems such as MW disposal planning. Construction of score and accuracy functions for stable alternative ranking. This paper introduces score and accuracy functions designed specifically for IVFFLS-based evaluation results. These functions provide an effective and logically consistent mechanism for ordering alternatives and resolving ranking ties under interval-valued Fermatean linguistic uncertainty. Construction of score and accuracy functions for stable alternative ranking. This paper introduces score and accuracy functions designed specifically for IVFFLS-based evaluation results. These functions provide an effective and logically consistent mechanism for ordering alternatives and resolving ranking ties under interval-valued Fermatean linguistic uncertainty. Adaptation of COPRAS into the IVFFLS environment. A key methodological contribution of this study is the extension and restructuring of the COPRAS decision-making method under IVFFLS-based information. Since COPRAS requires systematic computation of benefit and cost indices, adapting it into an interval-valued Fermatean linguistic setting is nontrivial. The proposed IVFFLS-COPRAS model preserves interval uncertainty and Fermatean membership structures throughout the computational procedure, resulting in a more realistic and reliable ranking process compared with classical COPRAS. Adaptation of COPRAS into the IVFFLS environment. A key methodological contribution of this study is the extension and restructuring of the COPRAS decision-making method under IVFFLS-based information. Since COPRAS requires systematic computation of benefit and cost indices, adapting it into an interval-valued Fermatean linguistic setting is nontrivial. The proposed IVFFLS-COPRAS model preserves interval uncertainty and Fermatean membership structures throughout the computational procedure, resulting in a more realistic and reliable ranking process compared with classical COPRAS. Proposal of a complete MCDM framework rather than a standalone theoretical extension. This study provides a full decision-support pipeline, including IVFFLS modeling, aggregation mechanisms, score–accuracy ranking, COPRAS-based evaluation, and final prioritization. Therefore, the proposed approach is not merely a theoretical set extension but a complete decision-making framework applicable to complex real-world problems. Proposal of a complete MCDM framework rather than a standalone theoretical extension. This study provides a full decision-support pipeline, including IVFFLS modeling, aggregation mechanisms, score–accuracy ranking, COPRAS-based evaluation, and final prioritization. Therefore, the proposed approach is not merely a theoretical set extension but a complete decision-making framework applicable to complex real-world problems. Application to a critical real-world problem: sustainable medical waste disposal planning. The proposed method is applied to the evaluation and ranking of MW disposal alternatives under multiple conflicting criteria, such as environmental impact, human health risk, cost, and technological feasibility. The results offer practical guidance for hospital managers and policy makers by identifying the most appropriate disposal strategy under uncertain expert judgments. Application to a critical real-world problem: sustainable medical waste disposal planning. The proposed method is applied to the evaluation and ranking of MW disposal alternatives under multiple conflicting criteria, such as environmental impact, human health risk, cost, and technological feasibility. The results offer practical guidance for hospital managers and policy makers by identifying the most appropriate disposal strategy under uncertain expert judgments. Validation through comparative and robustness analysis. To demonstrate the rationality and reliability of the proposed approach, comparative analysis with existing methods and robustness investigations are performed. The consistency of the results supports the applicability of the IVFFLS-based framework and highlights its stability in uncertain decision environments. Validation through comparative and robustness analysis. To demonstrate the rationality and reliability of the proposed approach, comparative analysis with existing methods and robustness investigations are performed. The consistency of the results supports the applicability of the IVFFLS-based framework and highlights its stability in uncertain decision environments. In summary, this study contributes to both the theoretical development of uncertainty modeling and the methodological advancement of MCDM by introducing an IVFFLS-based integrated decision framework, novel aggregation operators, and an adapted COPRAS ranking method, and by demonstrating its usefulness in a significant sustainability problem. It should be emphasized that the novelty of this study is not limited to defining a new fuzzy linguistic set. The main contribution is the development of a complete MCDM framework that jointly models linguistic ambiguity, interval uncertainty, and Fermatean hesitancy and preserves them throughout aggregation and ranking. This provides a more expressive and realistic decision-support mechanism for high-risk applications, such as medical waste-disposal planning. Literature Pamucar et al.’s study15 aims to develop a novel integrated MCDM model for processing FL data based on D numbers. It was determined that the hospital system should be updated, and purchasing a new infectious waste treatment plant should be considered. The model incorporates the advantages of several methods and theories. The six possible solutions that were assessed using eighteen criteria and categorized into the following 4 groups–economic, social, technological, and environmental–formed the basis of the first model. Four subject-matter specialists assessed the criteria and possible solutions. A hybrid BWM-MABAC-D MCDM model is put out in this paper. Sensitivity analysis is done using the VIKOR and TOPSIS techniques. Liu et al.16 present a novel MCDM method for choosing MW treatment technology based on the IL Hamy mean with linguistic scale functions. IL variables based on the MCDM technique are presented in this study. since the COVID-19 pandemic is well recognized. Based on applying the five BMW disposal procedures the hospital had chosen, Narayanamoorthy et al.17 chose a MW disposal treatment system. To choose a special BMW disposal treatment technique, the MCDM method used Hesitant Fuzzy Multi-Objective Optimization and Hesitant Fuzzy Subjective and Objective Weight Integrated Approach. A novel integrated MCDM technique w.r.t interval-valued fuzzy (IVF)-DEMATEL and IVF-TOPSIS is presented in the study by Li et al.18 for assessing MW treatment methods in emerging nations from a sustainability standpoint. Given the unavailability of a technical approach that considers precise linguistic terminology and the attitude traits of decision-makers, a hybrid MCDM method was used in the study by Mi et al.19. In order to estimate and select the optimal option for MW treatment, the MCDM method in conjunction with the COPRAS technique in a PFS is provided in Ref.20. A model for choosing the kinds of incinerators that best address the MW problem in secondary healthcare settings is put out by Puska et al.21. The suggested approach combines the FUCOM and CRADIS methodologies. Puska et al.22 employed the fuzzy-rough(FR)-CoCoSo approach and the FR-LMAW technology for MW management. The ELECTRE approach was proposed by Abdelhafeez et al.23 to rank and analyze MW solutions in a neutrosophic context. Goldani and Ishizaka24 presented a new MCDM method combining fuzzy BWM and MULTIMOORA techniques and applied it to the selection of healthcare waste treatment technology for a health center in Iran. In Ref.25, a novel three-way decision-based and cross-entropy-based MAGDM method was developed to implement MAGDM within a multi-granulation q-rung orthopair fuzzy incomplete information system, and the results were applied to the selection of healthcare waste processing technologies. The study in Ref.26 used fuzzy-logic-based SIWEC and RAWEC techniques to determine the most suitable sustainable solid waste disposal technology for the planned Çivril Solid Waste Disposal Facility in Denizli province. It provided a reliable, systematic framework for sustainable waste management decision-making. Chew et al.27 used MCDM with other methods such as the ANN analysis, linear Diophantine fuzzy set choice by opinion score approach, and the AHP to provide more reliable findings. To choose a suitable MW disposal method28, employs the Archimedean t-norm and t-conform-based IF-WASPAS approaches. The study by Ismail et al.29 aimed to analyze the principles of decarbonization and the circular economy for sustainable medical waste management, to identify optimal solutions to reduce environmental impact and increase system efficiency. In this study, a novel hybrid MCDM model combining DEMATEL and ANP was applied to identify key factors influencing decarbonization and medical waste management practices. Sarwar et al.30 introduce an MCDM model combining the f, g, h-fractional fuzzy set-based CRITIC and TOPSIS techniques with f, g, h-fractional fuzzy set-based Hamming and normalized Hamming distances. This methodology has not proven highly eff ective in addressing the complex decision-making challenges associated with MWM, especially in ambiguous environments. Kirişciet al.31 employed a combination of entropy defi ned by IVFFNs, SWARA, and WASPAS methods to achieve high safety and security for healthcare workers and the communitythrough the eff ective modeling and ranking of risks related to medical waste disposal.. Table 2 displays the MCDM approaches used to choose the MW disposal procedures. Table 2The methodologies employed for selection of medical waste disposal treatments.AuthorMulti-criteria decision-making techniquesPamučar et al.15BWM-MABAC based on D numbersLiu et al.16intuitionistic uncertain linguistic Hamy meanNarayanamoorthy et al.17Hesitant Fuzzy Subjective and Objective Weight Integrated Approach (HF-SOWIA) andHesitant Fuzzy Multi-Objective Optimization on the basis of Simple Ratio Analysis (HF-MOOSRA)Li et al.18DEMATEL-TOPSISMi et al.19D-numbers for complex multi-grained decision informationChaurasiya and Jain20PFS-COPRASPuska et al.21FUCOM - CRADISPuska et al.21FR-LMAW and FR-CoCoSoAbdelhafeez et al.23ELECTRE Method(single valued neutrosophic sets)Katrancι et al.26Fuzzy SIWEC-RAWECChew et al.27AHP, LDFN-FDOSM and ANNKomal28Archimedean t-norm and t-conorm based IF-WASPASIsmail et al29DEMATEL-ANPSarwar et al.30f, g, h-fractional fuzzy set-based CRITIC and TOPSISKirişci et al.31IVVFFS-entropy-SWARA-WASPA The methodologies employed for selection of medical waste disposal treatments. Problems in the actual world are frequently highly intricate. Complexity can be attributed to ambiguities, randomness, or limited understanding caused by a lack of data or low-quality information. Using linguistic terminology to identify the parameters of the problem statement poses the most difficulty. Understanding decision-maker’s knowledge of confusing facts will result in more accurate predictions and valuable solutions. Fuzzy modeling is a mathematical technique for expressing uncertainty in human systems that mainly relies on Zadeh’s enology. Understanding decision-makers knowledge as ambiguous data will result in more exact forecasts and advantageous solutions (Zadeh’s FS concept). Even while the study of partial membership required a significant divergence from conventional logic, it is evident that FS theory cannot determine the satisfaction or dissatisfaction of human judgment on an individual level. Atanassov32 devised the IFSs. Since then, IFSs have been employed by many scholars in a range of optimization-related disciplines. PFSs were created by Yager33. Senapati and Yager34 designed the FFSs. Numerous studies have been undertaken on FS, IFS, and PFS35–37,33. FFS studies quickly became established in the literature34–40. In Ref.41, information from IVFFS is obtained by developing IVFF Dombi weighted averaging (geometric) operators, which utilize Dombi operations that are combined. Seikh and Chatterjee42 introduced an innovative approach using SWARA, BWM, and VIKOR in an IVFF environment to assess the challenges and find effective strategies for e-waste management. In Ref.43, the triangular divergence measure has been utilized to propose a modified distance metric for IVFFSs and a proposed modified TOPSIS method. Seikh and Chatterjee42 presented a new decision-making method combining the SWARA and ARAS methods using IVFFSs. In the paper by Mandal and Seikh44, a hybrid multi-attribute group decision-making methodology is introduced, based on the entropy method, deviation-based method, and MABAC method with IVSF sets, to select the most effective plastic waste management process when the decision experts’ and attribute weights are completely unknown. Chatterjee and Seikh43 developed a robust multi-attribute group decision-making framework that combines circular Fermatean fuzzy numbers with the Schweizer-Sklar weighted aggregation operator, as well as RANCOM, OWCM, and AROMAN, to capture the uncertainty and imprecision in expert judgments. Atanassov and Gargov45 were the first to describe the IVIFS. The closed subinterval of the interval [0,1] was used to express the degree of membership and nonmembership. Peng and Yang46 and Zhang47 further proposed the IVPFS, whose membership function and nonmembership function are represented by an interval number. Jeevaraj defined the IVFFS48. The theory of IVFFS, which is a generalization of the FFS, is a more solid and trustworthy instrument to deal with the ambiguous and partial data in the MCDM process. As a result, it can be used in more applications49. These investigations are capable of handling ambiguous data that is limited to quantitative definitions. However, in real life, many DM scenarios occasionally involve qualitative features of portraying imperfect information and uncertainty. Decision-makers, for example, favor using language such as “very low,” “low,” “medium,” “high,” “very high,” “perfect,” etc. when evaluating someone’s “intelligence.” In that case, a decision-maker can use language variables to indicate his thoughts about the objects50. Xu51 proposed a continuous linguistic term set to describe it. By merging the ideas of the linguistic approach and IFS, Zhang52 created the LIFS, which describes the degree of membership and nonmembership reflected by the linguistic terms. However, because of the ambiguity of human cognition and the complexity of real-world DM situations, it is not easy to characterize the decision information by exact values. In some cases, a qualitative evaluation of numerous criteria is required. For example, since language evaluation closely reflects human cognition, linguistic information helps evaluate a company’s performance when an expert concludes that the performance is excellent. Zadeh proposed the LTS: is an expression that can be used to represent the 7 terms of LTS. However, the evaluation’s nonmembership degree cannot be described by the LTS to the language phrase; in some instances, this is somewhat discordant with the real situation. For example, one team of experts believes which the company’s performance is excellent at the membership level (0.85). In contrast, another group of experts believes the company’s performance is very good at the nonmembership level (0.62). Currently, no FS exists that can adequately describe these kinds of decision-making issues. This situation motivates us to propose the Fermatean fuzzy LTS (FFLTS), built on top of LTS and FFS53, to transmit such information. Preliminaries A mathematical framework called the IVFFS is utilized in DM and modeling situations with imprecision and uncertainty. When exact s are challenging to assign, IVFFS adds more flexibility and expressiveness to regular FSs. It is advantageous in the following situations: IVFFS is frequently used in MCDM problems with ambiguous or imprecise decision criteria. By depicting and as intervals, it facilitates handling subjective assessments. IVFFS offers a framework for modeling and reasoning with interval-valued and when working with datasets that contain inherent uncertainty or partial information. Expert systems and human-centric decision models are examples of systems that can benefit from IVFFS since they depend on human input. Instead of giving exact values, humans frequently give ambiguous or interval-based evaluations. By taking into account interval-valued degrees of agreement and disagreement, IVFFS may compile a variety of viewpoints in scenarios involving several stakeholders or experts. Systems with unclear or ambiguous operating parameters, such as process control or robotics, can be modeled using IVFFS. Applications such as image processing and data clustering that require robust handling of ambiguous or overlapping patterns utilize IVFFS. In fields where data uncertainty is standard, such as sustainability and environmental management, IVFFS facilitates DM. The following succinctly describes the reasons for selecting IVFFS over alternative fuzzy models: By enabling the expression of , , and hesitation degree as intervals, IVFFS offers a more adaptable structure. Better suited for situations in which exact membership values are not known. Beneficial in situations when ambiguity is a natural part of the situation. IVFFS offers a more adaptable paradigm where DEs lack complete information or have concerns about the veracity of data from several sources. It is particularly favored when it is necessary to communicate the uncertainty in expert opinions in intervals. IVFFS provides a more adaptable representation for every criterion when many criteria need to be assessed. In situations when human judgments or preferences are ambiguous, working with interval values yields more realistic outcomes. Intervals can more accurately portray fluctuating situations when information is ambiguous because of a system’s time-varying nature. IVFFS simulates uncertain data in data analysis procedures, intensive learning, and artificial intelligence systems that rely on fuzzy logic. Interval values can be used to express uncertainty in systems that operate with incomplete data. IVFFS applies when a thorough expression of uncertainty is required in financial analysis, project management, or security risk assessment. IVFFS offers a strong mathematical framework for handling complex uncertainty by fusing the benefits of interval-valued representations and FFSs, which permit larger ranges for and than IFSs. This strategy makes more robust and trustworthy decisions possible, enabling DEs to communicate and manage uncertainty across a broader spectrum. Definition 3.1 Reference50 Let h and stand for a set’s odd number and cardinality, respectively. An LTS with continuous finite subsets is the set . represents a language variable’s possible value. is the definition of the LSF s, where s is a strictly monotonically growing function with respect to subscript i54. Consider any two LTSs with the the following: i. if , if , ii. (negation operator), (negation operator), iii.When then , When then , iv.When then . When then . Xu51 has extended the discrete LTS LT to the continuous LTS (), where is a sufficiently large positive integer. Basic operations for for and .55, i., , ii., , iii., , iv.. . Let S be considered as the starting set. Consider the set S as initial. The set is called FFS34, where and . The is identified as . Let , and be the three FFSs. Then, some operations of FFSs as follows34: i.; ; ii.; ; iii.; ; iv.; ; v.; ; vi.; ; vii.. . Definition 3.2 Reference34 Let be an FFS. Then, and are said to be a score function () and an accuracy function(), respectively. For and , consider the property . Then, the FFS is called a natural quasi-ordering34 For the two FFSs and ; , , , , . . For the two FFSs and ; , , , , then (i),(ii),(iii). then (i),(ii),(iii). (i), , (ii), , (iii). . The property is holds if and only if binary relation is the existence (denoted by ). Let be lower and upper bounds of closed intervals and , where for , , . The continuous LTS L, if and are two sets of some interval values in [0, 1], the set is called IVIFLS on H with . The continuous LTS L, if and are two sets of some interval values in [0, 1], the set is called IVPFLS on H with . Methodology Interval-valued fermatean linguistic sets IVFFLS provides a hybrid information representation that goes far beyond classical fuzzy set theory, modeling uncertainties more richly. The fundamental pillars of this structure are: Fermatean Fuzzy Sets: Offer a structure in which the sum of the cubes of membership and non-membership degrees is constrained to . This extension defines a broader range of uncertainty than classical and intuitive fuzzy sets. Interval-Valued Structure: By expressing a value as an interval rather than a single definite number, it directly accounts for decision-makers’ hesitations and uncertainties. Linguistic Representation: Mental evaluations of human experts are often expressed using linguistic terms such as “high,” “medium,” and “low.” IVFFLS transforms these expressions into a consistent mathematical model. Combining these three components creates not only a theoretical extension but also an uncertainty model that has not yet been systematically addressed in the literature. Such a combination allows for a more flexible and realistic representation of uncertainty in decision models. IVFFLS models uncertainties more powerfully. In classical fuzzy systems, uncertainty is modeled with a single membership value. This may not fully reflect the experts’ mental uncertainty. In IVFFLS, however, the expert provides the linguistic term “high,” which is then converted into an interval-valued Fermatean fuzzy structure. Both hesitation and the interval of uncertainty represent the result. This allows for more accurate modeling of expert uncertainty, especially in multi-criteria and risk-intensive decision problems such as medical waste management. Single-valued memberships cannot adequately represent the nature of real-life expert statements. In a decision support method, the higher the expressive power, the better it can reflect the decision-maker’s intentions, uncertainty, risk perception, and expert hesitations. IVFLS, by increasing linguistic ambiguity to a “range” level, utilizing the wide ambiguity field of the Fermatean structure, and preserving the mathematical representation of linguistic expressions, transfers the assessments of human experts into the mathematical model with much higher expressive power. This directly reflects what decision-makers are actually thinking, especially in cases such as medical waste disposal. Thus, the model reduces errors caused by uncertainty. Let us explain the innovative contributions of IVFFLS. First, let us examine the theoretical contribution. IVFFLS introduces a new class of uncertainty that integrates both linguistic evaluation and interval ambiguity. The use of fermatean structures allows for the modeling of a broader membership-non-membership relationship. There is no systematic theory in the literature that brings these three components together under a single framework. Secondly, let us look at the methodological contribution. New aggregation operators and score/accuracy functions suitable for IVFFLS have been defined. These operators enable more efficient uncertainty measurement. Finally, let us look at the practical contribution. It produces more realistic and usable results for multi-criteria, risk-intensive problems based on linguistic expert statements, such as medical waste disposal methods. It improves the quality of decision-making for healthcare administrators and public authorities (especially under uncertain conditions). When comparing IVFFLS with other models, it is easy to see that IVFFLS is not just an extension: IVFFLS provides a much wider range of expressions than classical FFLS. IVFFLS takes into account hesitation/interval ambiguity (classical heuristics or fermatean sets cannot do this). The operators and score functions developed with IVFFLS offer new features not found in the literature. IVFFLS is not merely an extension of traditional fuzzy set theory; it is a new class of uncertainty that offers a systematic and robust model of information representation, combining interval ambiguity of linguistic expressions with Fermatean extended membership relations. This model provides a representational capability that significantly surpasses the expressive power of classical approaches by directly accounting for expert hesitation in multi-criteria decision problems. Definition 4.1 For the continuous LTS LT, if and are two sets of some interval values in [0, 1], the set is called IVFFLS on S with . are lower and upper bounds of closed intervals and , where for , , . In this case, F can also be written as: are two sets of some interval values in [0, 1], denoting the possible membership degrees and non-membership degrees of the element to the set . The hesitation interval of , Definition 4.2 Choose the two IVFFLNs and . For , , , , , , , Theorem 4.3 Take . Let , , and be three IVFFLNs. i., , ii., , iii., , iv., , v., , vi., , vii., , viii.. . Proof (iii.) and This is the desired result. Others are easily shown from the Definition. Comparison laws: Definition 4.4 Take the IVFFLN . Score and accuracy functions are: is called the score function. is called the accuracy function. Theorem 4.5 Let and be two IVFFLNs. , , i.,ii.. i.,ii.. i., , ii.. . Definition 4.6 Let and be two IVFFLNs. is called the distance between and . Aggregation operators Let us examine the fundamental role of aggregation operators. In multi-criteria decision-making processes, a set of criteria is evaluated; decisions are made by transforming values obtained from different sources into a single “composite decision value.” Aggregation operators perform this combining process. However, classical aggregations are based on fixed numerical values, may not directly handle linguistic ambiguities, and do not consider expert hesitation or interval representation. In the IVFFLS environment, aggregation operators take the criterion values as linguistic terms interval-valued Fermatean fuzzy numbers an ambiguous and wide range of expressions. Therefore, classical weighted summation or averaging operators are insufficient. New aggregation operators suitable for the IVFFLS environment not only account for numerical values but also consistently consider linguistic ambiguities, hesitation intervals, and the wide ambiguity field of the Fermatean fuzzy structure, thereby giving the decision model mathematical meaning. In this section, we will explain the innovative role of aggregation operators, whose definitions and theoretical structures will be provided: They enable combining uncertainty with mathematical consistency. In IVFFLS, each criterion evaluation is given linguistically by an expert. These linguistic terms (e.g. “excellent,” “average,” “low”) are then converted into IVFF numbers. However, conversion alone does not eliminate uncertainty. What is then needed is to weight these interval values and consolidate multiple expert opinions into a single result. The aggregation operators developed specifically here, beyond classical summation and averaging, preserve the membership/external membership power of the Fermatean fuzzy structure, do not disrupt interval ambiguity with operations, and mathematize the expressive power of linguistic terms. Therefore, these operators produce not only summation but also consistent information synthesis. Simply summing the numerical values will not be meaningful. Many traditional methods sum numerical values, take weighted averages, and normalize criterion scores. However, the information in IVFFLS is expressed in both interval form and in terms of Fermatean fuzzy membership/external membership, and it also contains linguistic ambiguity. Therefore, classical summation distorts this expressive power and does not adequately reflect expert uncertainty. Aggregation operators, therefore, offer a combination operation that prevents information loss. At the same time, summation is performed with integrated weights. In MCDM, criterion weights express the relative importance of the criteria. In the IVFFLS environment, the degree of uncertainty of each criterion may be different; some criteria may be expressed more “clearly,” while others may be more “hesitant,” and the weight multiplier interacts not only with numerical values but also with uncertainty ranges. The aggregation operators proposed in this study process criterion weights in an uncertain environment and calculate the weighted sum in a way consistent with Fermatean linguistic expressions, thereby effectively reflecting both weight and uncertainty simultaneously. This is a step beyond classical weighted summation. The new operators provide a solid foundation for scoring and rating. In MCDM methods like COPRAS, the final ranking is done by combining criterion scores, calculating positive/negative effect sums, and normalizing them. Without aggregation operators, the weighting balance between criteria is inconsistent, uncertainty transfer is lost, and comparable results cannot be obtained in the literature. However, this study, using aggregation operators specifically defined for IVFFLS, produces reliable scores that combine both positive and negative criteria while preserving uncertainty, hesitation, and linguistic expressiveness. Thus, decision-makers see not only the ranking result but also more stable results at different levels of uncertainty. The theoretical significance of these new operators can be explained as follows: Many aggregation operators have been developed in the literature for classical numerical environments, and for intuitionistic fuzzy or Pythagorean fuzzy environments. However, measurable, mathematically consistent aggregation operators for IVFFLS have remained mainly undefined. This study introduces a “new class of operators” in the literature by defining aggregation operators that both support the IVFFLS environment and can be used in MCDM processes. This is not merely an extension, but a new information synthesis methodology. The practical benefits of aggregation operators can be summarized as follows: they accurately combine different levels of uncertainty among experts, synthesize diverse expert opinions into a single model, preserve the linguistic ambiguity ranges of criteria, and prevent the exclusion of ambiguity from the model. The proposed aggregation operators are not merely mathematical tools that combine linguistic expressions; they offer a novel information synthesis methodology that consistently integrates ambiguity, hesitation, and the Fermatean fuzzy information structure into MCDM processes. These operators enable the efficient evaluation of critical criterion weights in an uncertain environment and significantly enhance the expressive power and reliability of the decision model, going beyond classical aggregations. Throghout the article, will shows the weight vector of with and . Weighted aggregation and geometric weighted operators Definition 4.7 For , let be a collection of the IVFFLNs. The function defined by (12) is called an IVFFLWA. Theorem 4.8 Let () be a collection of the IVFFLNs. The equation (12) is the aggregated value for the IVFFLWA operator. Proof The proof will be done by mathematical induction. For the , Thus, it is seen that the condition for is satisfied. Let us now assume that Eq. (12) is satisfied for and show that the condition for is satisfied. Using the item (3.) of Definition 4.2; Definition 4.9 Let () be a collection of the IVFFLNs. The function defined by (13) is called an IVFFLGW. Lemma 4.10 Reference56 For and , Theorem 4.11 (Idempotency Property) If all are equal, with , and (), then . Theorem 4.12 (Boundedness Property) For the collection of IVFFLEs (), if then, Proof Since , , , , , , , for all , Then, and Since , we have . We can obtain . Similarly, . This is desired result. Theorem 4.13 For the collection of IVFFLEs () and , . Proof Let’s use Lemma 4.10. For any , Similarly, and . Then, That is, Therefore, . Ordered weighted average and ordered geometric weighted aggregation operators Definition 4.14 Take the collection of IVFLFEs , and the aggregation-associated vector ( with ). Let be denoted the jth largest of them. Then, for the set of all IVFFLNs A, (i.) The mapping is called an IVFL ordered weighted average operator, where (ii.) The mapping is called an IVFL ordered weighted geometric operator, where Under some circumstances, the IVFFLOWA and IVFFLOWG operators both possess the idempotency and boundedness features. These features can be demonstrated similarly to Theorems 4.11 and 4.12 for operators IVFFLOWA and IVFFLOWG. Theorem 4.15 (Commutativity Property) Take the collection of IVFLFEs . If is any permutation of , then Proof Since is any permutation of , let . be the ith largest of them, we have Generalized weighted averaging and generalized weighted geometric aggregation operators Definition 4.16 Let be a collection of the IVFFLNs. Let of be the weight vector with and and is a parameter. Then, the generalized IVFFLWA operator is defined as follows: Theorem 4.17 Equation (18) is an IVFFLFE. Theorem 4.18 The equation is an IVFFLFE. Under some circumstances, the GIVFFLOWA and GIVFFLOWG operators both possess the idempotency and boundedness features. These features can be demonstrated similarly to Theorems 4.11 and 4.12 for operators GIVFFLOWA and GIVFFLOWG. Generalized ordered weighted averaging and generalized ordered weighted geometric aggregation operators Definition 4.19 Let be a collection of IVFFLEs. Let of be the weight vector with and , is the jth largest of IVFFLEs, then the generalized IVFFLOWA operator The generalized IVFFLOWG operator If , Under some circumstances, the GIVFFLOWA and GIVFFLOWG operators both possess the idempotency and boundedness features. These features can be demonstrated similarly to Theorems 4.11 and 4.12 for operators GIVFFLOWA and GIVFFLOWG. Theorem 4.20 Let be a collection of IVFFLEs, of be the weight vector, is the jth largest of IVFFLEs, and , then i.; ; ii.; ; iii.. . Linguistic hybrid aggregation operators Definition 4.21 Let be a collection of IVFFLEs,n is balancing coefficients, and , is the aggregation-associated vector of them, with and ,and be the location weighted vector with and then the IVFFLHA operator The IVFFLHG operator The generalized IVFFLHA operator The generalized IVFFLHA operator in which is the ith largest of IVFFLW argument , and is the jth largest of IVFFLW argument . Theorem 4.22 Let be a collection of IVFFLEs, of be the weight vector, is the jth largest of IVFFLEs, and , then i.; ; ii.; ; iii.; ; iv.. . Proposed method We can explain the novelty and importance of the method we will present in this section as follows: Let us answer the question, “Why is such a method needed?” In high-risk decision problems like medical waste disposal, decision-makers make linguistic assessments instead of precise numerical data (“high risk,” “medium cost,” etc.), assessments often involve interval ambiguity (uncertainty about whether it is 0.6 or 0.8), there is simultaneous consideration of both membership and non-membership (an alternative might be good from an environmental perspective but bad from a cost perspective). Differences and hesitations are seen among expert opinions. Classical MCDM methods (AHP, TOPSIS, COPRAS, etc.) generally work with precise values and therefore cannot fully represent this uncertainty. Classical fuzzy or intuitive fuzzy models also have limitations in terms of expressive power in some cases. This study addresses precisely this gap in the literature and meets the need for a decision model that provides a stronger representation in decision problems involving “linguistic, interval, and high-degree ambiguity.” The novelty of the method and its contribution to uncertainty representation lie in its not addressing uncertainty at only one layer. First, there is linguistic representation. Linguistic terms are the most natural form of information for decision-makers. This study directly incorporates decision-makers’ natural expressions into the model. When using an interval-valued structure, the expert’s “high” evaluation is not a single value, so the question “high, but how high?” remains ambiguous. The interval-valued structure incorporates this hesitation into the model. A wider range of uncertainty can be examined with a fermatean fuzzy structure. The fermatean fuzzy approach offers a broader range of expression than classical intuitionistic or Pythagorean models. Especially in problems with high-risk and contradictory criteria, this broader range offers a more suitable mathematical framework for the decision-maker’s mental evaluation. As a result, the method combines uncertainty in three layers: linguistic, interval, and FFS. This combination is the fundamental basis of the study’s innovation. The methodological innovation lies in the operators and score functions. The innovation in this study lies not only in the data implementation but also in establishing the mathematical infrastructure required for COPRAS to function within the IVFLS environment. In this context, new aggregation operators have been defined, their fundamental properties have been provided, consistent processing rules have been developed to combine linguistic-interval-FFS information, and score/accuracy functions have been used to sort IVFLS values. This section constitutes the theoretical backbone demonstrating that the method is not merely an “implementation.” The adaptation of COPRAS to the IVFLS environment is also an innovation. The COPRAS method typically uses a sum of benefit criteria, a sum of cost criteria, and relative importance and performance indices. However, for COPRAS to be applicable in the IVFLS environment, it is necessary to maintain range uncertainty, process membership/non-membership values together, and consistently convert linguistic data into numerical values for calculation. Therefore, this study is not merely about “using” COPRAS, but about restructuring COPRAS in a new uncertainty environment. This is a significant methodological contribution. Given the method’s practical importance and its suitability for critical decision-making problems, such as medical waste management, it is evident. Problems such as selecting medical waste disposal methods simultaneously involve criteria including environmental risk, human health risk, cost, legal compliance, and technological feasibility, and there is significant conflict among them. In such problems, classical numerical models ignore uncertainty, oversimplify expert evaluation, and compromise the realism of the results. The proposed method, because it operates without excluding uncertainty, improves decision quality, produces more reliable rankings, and provides the decision-maker with more explainable results. Therefore, the method has high value not only theoretically but also practically. If we examine the significance of the results, we see that more reliable rankings and robustness are obtained. One of the strongest arguments supporting novelty in such studies will be the answer to the question, “Does the proposed method produce more stable results under different uncertainty conditions?” If the study includes sensitivity analysis, comparative analysis, or ranking comparisons across different methods, this underscores the importance of the method. In this way, the method can be positioned not only as “new,” but also as a framework that provides “more robust” decision support. In terms of contribution to the literature, a new decision-making framework is important. The point to emphasize here is that this study not only proposes a new set but also a complete MCDM framework, including set definition, operators, score functions, a COPRAS-based decision algorithm, implementation, and analysis. This is a significant contribution to the literature in the “method development” category. In summary, this study is not merely a simple extension of existing fuzzy linguistic sets; it presents a novel IVFFLS-based decision-making framework that combines interval-valued uncertainty, Fermatean fuzzy membership structure, and linguistic evaluation under one roof. Furthermore, unique aggregation operators and sorting mechanisms have been developed to solve decision problems in this environment, and an integrated MCDM approach has been created by adapting the COPRAS method to the IVFFLS environment. In this respect, the study provides a significant contribution to filling the gap in uncertainty representation in the literature, both theoretically and practically. IVFFLS-decision steps Based on the given LTS , let be a set of m alternatives, and be the set of criteria. Consider that is the decision matrix, where is criteria value given by decision makers for alternative w.r.t attribute , and it takes the form of the IVFFL variable. Then, the ordering of alternatives is required. Figure 3 shows the first phase of the MW disposal selection problem in an MCDM framework. Decision-making process for medical waste disposal. Step 1: To nullify the effect of the different criteria, transformation the decision matrices into the normalized form The elements of the normalized decision matrices can be obtained: Step 2: Aggregate all the based on the IVFFLOWA (or IVFFLOWG) operator (Eqs. (15) and (16)). Step 3: Aggregate all the collective preference values for obtaining the overall assessment values corresponding to the alternatives based on IVFFLWA (or IVFFLWG) operator (Eqs. (12) and (14)) Step 4: Compute the score values of the collective overall values and rank all the alternatives The accuracy degrees and of the collective overall preference values and , respectively. Step 5: Rank all feasible , hence according to , . Step 6: Select the best one. COPRAS method COPRAS is often used to rank alternatives based on specific criteria. It is particularly popular in engineering, management, supply chain, and sustainability. It is ratio-based. Thus, evaluating alternatives is based on the proportional effect of the normalized values and the criteria weights for each criterion. It distinguishes between advantage and disadvantage criteria. In other words, benefit (to be maximized) and cost (to be minimized) criteria are considered separately. It ranks the alternatives. In the final stage, a “priority rating” is calculated for each alternative, with the highest value being the best option. It has several advantages: It considers both benefit and cost criteria. The calculation steps are relatively simple. It provides a precise ranking among alternatives. It is particularly effective when uncertainty is low and numerical data is available. Instead of the precise numerical values used in classical COPRAS, the technique obtained when IVFFS are used to process evaluations expressed in uncertain, linguistic, or interval form is IVFS-COPRAS. This new technique makes it easier to capture uncertainty. It produces more reliable results in situations where decision-makers are uncertain. It easily processes linguistic data. Concepts such as “high quality” and “low cost” are quantified, resulting in a more flexible model. It produces more realistic results than the classic COPRAS technique because it accounts for hesitancy in decision-making environments. IVFF-COPRAS decision steps Step 1: The individual IVFF-decision matrix is constructed. Step 2: The IVFFLWA operator is used to create the IVFF-decision matrix. Step 3: Equation (21) is used to determine the IVFF maximizing indices for the benefit criteria, while Eq. (22) is used to determine the IVFF minimizing indices for the cost criteria: where shows benefit criteria and denotes cost criteria. Step 4: The computation equation is called the relative degrees, where . Step 5: The computation equation is called the utility degree of options. Step 6: The option with the highest utility degree is the best one. Application and results Waste management is a crucial aspect of healthcare. When MW is not adequately managed, there is a danger of infections, adverse effects, injuries, and environmental contamination for waste handlers, the general public, and healthcare professionals. Managing MW needs considerable attention and fidelity to avoid detrimental health impacts from inadequate practices, such as exposure to toxic compounds and infectious pathogens57. Government support and dedication are necessary for universal, long-lasting, and sustained progress2. MW affects the ecosystem because it carries infectious diseases that could spread to other species. These MWs put hospital staffs, at risk for infection, which could harm their health. Planning for MW management is a key issue that must consider several critical aspects as well as practical solutions58. One of the most often used disposal techniques is incineration since it is practical, safe, and easy to utilize, particularly in developing countries59. The temperature at the incinerator’s exit is higher than 800 C. This high temperature can potentially burn most organic materials, converting them into inorganic dust and eliminating germs. Solid waste could be decreased by 85–90% after incineration60, 61, 62. MWs other than explosive and radioactive wastes could be burnt. In addition to burning hospital waste, several facilities provide waste processing, incineration, and flue gas purification. Standard incineration technologies include pyrolysis vaporization, plasma, and rotary kilns. Chemical disinfection has been around for a while and has several uses. Mechanical and chemical crushing procedures are commonly applied to hospital trash. Crushed hospital waste is typically combined with chemical disinfectants (such as calcium, sodium, or chlorine dioxide) and given the proper time to sit. Chemical disinfectants are excellent at eliminating bacteria and germs because of their broad sterilizing range, fast action, consistency, and low effective concentration. Chemical disinfection techniques may be considered when hospital waste volumes are small. Garbage is immobilized through encapsulation, which covers the waste in a solid matrix. The preferred technique for managing low- and intermediate-level radioactive waste in the nuclear industry has long been encapsulation in cement or its composites. Medical sciences use encapsulation in polyethylene or iron barrels partially filled with inert fillers such as plastic foam, bituminous sand, lime, cement mortar, or clay before disposing them in landfills or geological locations. When burned garbage is thrown into the environment, it releases phthalate and other heavy metals, including lead, cadmium, and tin, and the dioxin created during cremation. Before being burned, MW is separated from other municipal solid waste. Not only is it detrimental to the environment, but sending MW to incineration is more expensive than sending it to landfills. Landfill disposal is another option for MW treatment, not necessarily an alternative to incineration. However, it is against the law to dump biohazardous waste. Landfilling MW is still common in many areas, especially in developing nations. MW is separated in a landfill cell using this method. Microwave technology uses steam and wet heat as a low-heat, steam-based thermal disinfection method. Some people use infrared heaters, forced convection, or heated air circulation to heat the waste. Because of this, reverse polymerization occurs between 177 and 540 C in microwave technology. High-energy microwaves break down organic molecules. Electromagnetic waves (wavelength 1 mm-1 m, frequency 300–3000 MHz) induce the bonds between molecules to vibrate or rub against one another, increasing internal energy. In contrast to high-temperature disinfection, oxygen cannot burn in the N2 atmosphere. This reduced energy and temperature prevent heat loss and pollution of the environment because the disinfection process leaves behind a nontoxic residue. Alternatives (Fig. 411): Medical waste disposal techniques. Disinfection with chemicals. Chemical disinfection involves combining MW with a particular disinfectant solution and ensuring the disinfectant has enough time and space to reach the waste. Bacteria are eliminated, and MW is broken down during disinfection. For treatment to be effective, there must be maximum contact between the disinfectant and the MW63. Encapsulation. Encapsulation rendersMW immobile and places it within a plastic container or steel drum as a solid block. There are numerous benefits to using this strategy to stop MW. This procedure requires that the steel drums or plastic containers be emptied and thoroughly cleaned to ensure that any residual hazardous materials from earlier storage are eliminated. Landfill. MW is buried in the ground and allowed to decompose into innocuous compounds over time using the landfill method. Without anti-seepage measures in place, the MW dump system may allow a variety of hazardous compounds, pathogens, radioactive materials, etc., to seep into the soil when it rains. Dangerous materials could enter the food chain and endanger human health64. Electromagnetic wave sterilization. Microwave and radio wave sterilization technologies are examples of electromagnetic wave-based technologies. While radio wave sterilization uses electromagnetic waves with a lower frequency and greater penetration strength than microwaves, microwave sterilization uses high-frequency electromagnetic waves. Water, fat, and protein can absorb electromagnetic radiation, so they are used in sterilization. Incineration. Through thermal breakdown and oxidation at extremely high temperatures, the engineering process of incineration removes the organic portion of garbage. Incineration is one of the greatest and most commonly suggested methods for getting rid of MW since it requires less area, has a better treatment capacity, lowers the cost of transporting waste, and enhances the processes for turning waste into energy65 . Criteria and their explanations can be given as follows11: Waste residuals. This criterion examines how much waste is left over when a specific MW disposal method is used65. Infrastructure requirement. This criterion considers the essential organizational and physical structures and facilities (such as buildings, power sources, and machinery) needed for a MW disposal strategy65. Annual operating cost. Payments for staff, power, and other costs may be incurred when operating the waste disposal technique. Treatment system capacity. This criterion examines how much trash each treatment option can handle in a specific operation cycle65. Reliability. According to reference65, this criterion measures the MW treatment approach’s long-term dependability. Health effects. This criterion includes the adverse health effects on residents surrounding the operation and the harmful environmental emissions associated with each option65. Treatment efficiency. Treatment efficiency is a MW disposal technique’s long-term acceptance and skill65. Human resource requirement. This criterion considers the essential organizational and physical structures and facilities (such as buildings, power sources, and machinery) needed for a MW disposal strategy65. Except for criteria and , all other criteria are benefit. The weight vector is given as . The LTS given in (1) will be used. The five possible alternatives will be evaluated by using the IVFFL information and the IVFFL decision matrix are built, which is shown in Tables 3, 4 and 5. Table 3Decision matrix ., [0.55, 0.78]), [0.79, 0.43]), [0.53, 0.68]), [0.49, 0.65]), [0.38, 0.80]), [0.42, 0.71]), [0.28, 0.85]), [0.33, 0.56]), [0.90, 0.27]), [0.27, 0.85]), [0.77, 0.34]), [0.45, 0.81]), [0.56, .63]), [0.52, 0.63]), [0.38, 0.68]), [0.47, 0.56]), [0.36, 0.72]), [0.45, 0.67]), [0.58, 0.63]), [0.42, 0.62]), [0.26, 0.75]), [0.27, 0.90]), [0.48, 0.67]), [0.57, 0.78]), [0.59, 0.61]), [0.18, 0.93]), [0.34, 0.87]), [0.48, 0.66]), [0.51, 0.75]), [0.47, 0.79]), [0.38, 0.82]), [0.25, 0.88]), [0.57, 0.65]), [0.19, 0.95]), [0.45, 0.67]), [0.56, 0.71]), [0.26, 0.87]), [0.52, 0.76]), [0.33, 0.84]), [0.47, 0.68]) Decision matrix . Table 4Decision matrix ., [0.55, 0.69]), [0.43, 0.71]), [0.87, 0.22]), [0.84, 0.31]), [0.54, 0.69]), [0.53, 0.59]), [0.28, 0.86]), [0.64, 0.59]), [0.67, 0.35]), [0.25, 0.84]), [0.17, 0.90]), [0.16, 0.92]), [0.53, 0.65]), [0.68, 0.61]), [0.70, 0.47]), [0.18, 0.94]), [0.89, 0.16]), [0.26, 0.76]), [0.551, 0.58]), [0.57, 0.78]), [0.14, 0.86]), [0.48, 0.65]), [0.56, 0.82]), [0.51, 0.67]), [0.64, 0.47]), [0.59, 0.69]), [0.35, 0.78]), [0.89, 0.17]), [0.16, 0.88]), [0.53, 0.69]), [0.32, 0.85]), [0.38, 0.67]), [0.75, 0.46]), [0.59, 0.46]), [0.29, 0.77]), [0.36, 0.73]), [0.22, 0.96]), [0.53, 0.59]), [0.14, 0.91]), [0.37, 0.45]) Decision matrix . Table 5Decision matrix ., [0.19, 0.94]), [0.38, 0.72]), [0.69, 0.51]), [0.66, 0.73]), [0.56, 0.62]), [0.16, 0.92]), [0.24, 0.87]), [0.62, 0.65]), [0.35, 0.52]), [0.15, 0.91]), [0.27, 0.75]), [0.37, 0.65]), [0.13, 0.92]), [0.46, 0.69]), [0.34, 0.68]), [0.17, 0.88]), [0.78, 0.32]), [0.39, 0.74]), [0.15, 0.65]), [0.26, 0.83]), [0.17, 0.79]), [0.38, 0.72]), [0.26, 0.60]), [0.45, 0.76]), [0.37, 0.75]), [0.42, 0.88]), [0.39, 0.67]), [0.78, 0.43]), [0.25, 0.91]), [0.18, 0.87]), [0.33, 0.74]), [0.40, 0.76]), [0.53, 0.75]), [0.52, 0.75]), [0.12, 0.87]), [0.27, 0.78]), [0.17, 0.77]), [0.35, 0.85]), [0.19, 0.78]), [0.34, 0.73]) Decision matrix . Step 1: The normalized decision matrices are given in Tables 6, 7 and 8. Table 6Normalized decision matrix ., [0.55, 0.78]), [0.44, 0.57]), [0.50, 0.55]), [0.49, 0.65]), [0.38, 0.80]), [0.42, 0.71]), [0.28, 0.85]), [0.33, 0.56]), [0.90, 0.27]), [0.80, 0.60]), [0.36, 0.58]), [0.45, 0.81]), [0.56, .63]), [0.52, 0.63]), [0.38, 0.68]), [0.47, 0.56]), [0.36, 0.72]), [0.78, 0.36]), [0.72, 0.54]), [0.42, 0.62]), [0.26, 0.75]), [0.27, 0.90]), [0.48, 0.67]), [0.57, 0.78]), [0.59, 0.61]), [0.83, 0.34]), [0.76, 0.27]), [0.48, 0.66]), [0.51, 0.75]), [0.47, 0.79]), [0.38, 0.82]), [0.25, 0.88]), [0.57, 0.65]), [0.81, 0.38]), [0.77, 0.48]), [0.56, 0.71]), [0.26, 0.87]), [0.52, 0.76]), [0.33, 0.84]), [0.47, 0.68]) Normalized decision matrix . Table 7Normalized decision matrix ., [0.55, 0.69]), [0.55, 0.55]), [0.39, 0.35]), [0.84, 0.31]), [0.54, 0.69]), [0.53, 0.59]), [0.28, 0.86]), [0.64, 0.59]), [0.67, 0.35]), [0.77, 0.56]), [0.76, 0.61]), [0.16, 0.92]), [0.53, 0.65]), [0.68, 0.61]), [0.70, 0.47]), [0.18, 0.94]), [0.89, 0.16]), [0.87, 0.23]), [0.73, 0.35]), [0.57, 0.78]), [0.14, 0.86]), [0.48, 0.65]), [0.56, 0.82]), [0.51, 0.67]), [0.64, 0.47]), [0.45, 0.32]), [0.62, 0.28]), [0.89, 0.17]), [0.16, 0.88]), [0.53, 0.69]), [0.32, 0.85]), [0.38, 0.67]), [0.75, 0.46]), [0.64, 0.58]), [0.94, 0.18]), [0.36, 0.73]), [0.22, 0.96]), [0.53, 0.59]), [0.14, 0.91]), [0.37, 0.45]) Normalized decision matrix . Table 8Normalized decision matrix ., [0.19, 0.94]), [0.62, 0.61]), [0.44, 0.72]), [0.66, 0.73]), [0.56, 0.62]), [0.16, 0.92]), [0.24, 0.87]), [0.62, 0.65]), [0.35, 0.52]), [0.81, 0.35]), [0.80, 0.41]), [0.37, 0.65]), [0.13, 0.92]), [0.46, 0.69]), [0.34, 0.68]), [0.17, 0.88]), [0.78, 0.32]), [0.68, 0.45]), [0.76, 0.43]), [0.26, 0.83]), [0.17, 0.79]), [0.38, 0.72]), [0.26, 0.60]), [0.45, 0.76]), [0.37, 0.75]), [0.54, 0.52]), [0.72, 0.38]), [0.78, 0.43]), [0.25, 0.91]), [0.18, 0.87]), [0.33, 0.74]), [0.40, 0.76]), [0.53, 0.75]), [0.59, 0.54]), [0.90, 0.22]), [0.27, 0.78]), [0.17, 0.77]), [0.35, 0.85]), [0.19, 0.78]), [0.34, 0.73]) Normalized decision matrix . Step 2: Using the Eqs. (15) and (16), aggregate all the the normalized decision matrices with IVFFLOWA (Table 9). Table 9Aggergated matrix . Aggergated matrix . Step 3: Utilize the score function (Eq. 9) to calculate the score values of the collective overall evaluation values (Table 10), where The score values, , , , , Table 10Preference values., [0.168, 0.855]), [0.397, 0.641]), [0.665, 0.390]), [0.364, 0.835]), [0.476, 0.602]) Preference values. , [0.168, 0.855]) Step 4: By the ascending order of score values , all feasible are ranked: . Hence, the best alternative is . As a result, incineration was determined to be the most important element. The outcomes corroborate the conclusions drawn by Menekse and Akda11 and Manupati et al.65. Managing MW protects personnel, patients, and medical professionals. It is vital for the environment, public health, and safety. Effective waste management requires that MW be handled, processed, stored, transported, and disposed of appropriately. The management of MW disposal is a critical aspect of environmental sustainability. Since MW is growing in quantity daily, it is necessary to dispose of this waste properly. There are several ways to get rid of MW, and burning is one of them. The data indicate the current situation, revealing that incineration technology rates are higher than electromagnetic wave sterilization.Incineration is one of the best ways to dispose of MW since it requires less land, has a higher treatment capacity, is less expensive to transport, and improves waste-to-energy operations11. This rating is also in line with the results of Ref. 11, which show that disposal methods for electromagnetic wave sterilization–ranked second and third, respectively–are highly effective since they emit fewer pollutants and leave behind non-hazardous residues than alternative methods. Robustness analysis COPRAS’s primary goal is to determine each option’s relative usefulness and weight. This utility can be converted into the ranks of all options to determine which is the greatest. A tool for MCDM is the COPRAS approach. The COPRAS approach uses several linked weight factors to rank the options. The main objective of COPRAS is to find a solution that has the ratio to the ideal solution and the ratio with the ideal-worst solution. In this study, robustness analysis was performed with COPRAS, and it was determined that the same results were obtained when ranking according to the relative and utility of each alternative. We will conduct the Robustness Analysis of the study with IVFF-COPRAS66. First, when we rank the alternatives with IVFF-COPRAS (according to relative and utility degrees), the ranking comes out as . The result obtained with IVFF-COPRAS was similar to that found according to the IVFFLS algorithm. Initially, the solution found using the IVFF-COPRAS was tested by removing each alternative from the issue separately. According to the primary functions of the ith option in the benefit and cost criterion, the rankings of the existing alternatives were examined in this respect, and the findings are shown in Table 11. Table 11 shows that the IVFF-COPRAS solution has no rank reversal issue. Table 11Robustness analysis.AlternativesRanking 1Ranking 2Ranking 3---3--42-232111 Robustness analysis. Discussion Incineration using MCDM was the most suitable MW Disposal technique. In this case, it would be appropriate to discuss the Burning technique in general. One of the few solutions that can effectively handle all MW is controlled incineration at high temperatures (over 1000C). It offers the benefit of drastically lowering the weight and volume of the treated wastes. In some instances, hydrochloric acid (which contributes to acid rain), dioxins, furans, and other harmful airborne pollutants are produced, especially when garbage is burned at low temperatures (less than 800C) or when polymers containing polyvinyl chloride are incinerated. Emissions, residual ash, other airborne ash, and effluent gases emitted by incinerator chimneys contain them. Public health may be harmed by exposure to dioxins, furans, and other coplanar polychlorinated biphenyls. Dioxins and furans can occur in more relaxed pockets at the start or finish of the combustion process, even in high-temperature incinerators (over 800C). Suppose, for instance, that incineration occurs only at temperatures above 800C and that the formation of combustion gases is inhibited at 200–400C. In that case, process optimization can lessen the formation of these compounds. Modern large-scale processing facilities, including high-temperature incinerators, are not a good option for hospitals in impoverished nations. We should investigate whether such infrastructure exists in the area. Using a home waste incinerator is an additional option. Typically, this type of plant operates at temperatures exceeding 850C. However, we must supply MW straight into the kiln hopper instead of going through the bunker. Although not usually advised for MW incineration (because of an unsecured waste loading system and untreated emissions), cement works incinerators or blast furnaces used in the metal industry can also offer a suitable local alternative. Simple incinerator models are available for handling modest amounts of MW. Some can be purchased, while others need to be constructed on-site using locally sourced materials, with relatively straightforward blueprints. A discharge chimney and one or two combustion chambers (the primary and secondary chambers) make up these incinerators. The method for controlling combustion and airborne emissions is straightforward; however, it may not always exist67. Assume infectious MW is handled on-site in tiny, single- or dual-chamber incinerators. In that instance, this kind of facility cannot treat waste fractions like medications, chemicals, halogenated materials, or wastes with a high concentration of heavy metals (such as batteries, broken thermometers, etc.). To reduce pollutant emissions, the following recommended practices need to be kept in mind: Cutting back on waste production and sorting it at the source. Cutting back on waste production and sorting it at the source. Proper incinerator design to provide ideal combustion conditions: chimney extension (air pollution concentrations are 5–13 times lower if the chimney height is doubled from 3 to 6 meters). Proper incinerator design to provide ideal combustion conditions: chimney extension (air pollution concentrations are 5–13 times lower if the chimney height is doubled from 3 to 6 meters). Setting up incinerators distant from populated or agricultural regions; Setting up incinerators distant from populated or agricultural regions; The best operating methods include starting and cooling them appropriately, ensuring the temperature is high enough before feeding the garbage in, using the right amount of fuel and waste, and routinely removing ash. The best operating methods include starting and cooling them appropriately, ensuring the temperature is high enough before feeding the garbage in, using the right amount of fuel and waste, and routinely removing ash. refraining from burning PVC plastics or other chlorine-containing trash; refraining from burning PVC plastics or other chlorine-containing trash; performing routine planned maintenance, which includes inspecting, replacing, and stocking spare parts; performing routine planned maintenance, which includes inspecting, replacing, and stocking spare parts; providing personnel with regular training and an operating manual; providing personnel with regular training and an operating manual; Control of emissions: Emissions cannot exceed the national limit values. Control of emissions: Emissions cannot exceed the national limit values. Last but not least, it is imperative to avoid burning hazardous MW (uncontrolled incineration in barrels or landfills) because of the risk to employees, which arises from both the release of poisonous fumes and the incomplete combustion of infectious waste. However, until a better option is discovered, incineration in a barrel may be a temporary answer. In this instance, it is important to choose a barrel that has enough air intake beneath the combustion flame and to cover the top with fine wire mesh to keep the ash contained. Sensitivity analysis We tested the criterion weights in sensitivity analysis. Here, we considered the OAT (one–at–a–time) change () of the individual weights. After local calculations were performed, normalized weight vectors were calculated by changing each weight by , , and of the original OAT(one-at-a-time). Here, the weights were used. Below are the changes made for each weight and the normalized results (Table 12): Table 12Sensitivity analysis.Weights0.18[0.099, 0.165, 0.253, 0.297, 0.187][0.150, 0.156, 0.239, 0.280, 0.176][0.165, 0.153, 0.234, 0.275, 0.173]0.15[0.267, 0.067, 0.258, 0.302, 0.107][0.226, 0.120, 0.256, 0.300, 0.098][0.213, 0.135, 0.254, 0.298, 0.099]0.23[0.268, 0.222, 0.055, 0.325, 0.130][0.233, 0.205, 0.091, 0.339, 0.133][0.221, 0.200, 0.102, 0.346, 0.132]0.27[0.292, 0.243, 0.372, 0.046, 0.047][0.261, 0.217, 0.333, 0.090, 0.100][0.252, 0.209, 0.316, 0.108, 0.115]0.17[0.246, 0.204, 0.313, 0.380, 0.058][0.232, 0.19, 0.295, 0.358, 0.061][0.227, 0.188, 0.286, 0.347, 0.053]Weights0.18[0.194, 0.147, 0.226, 0.265, 0.167][0.208, 0.145, 0.222, 0.260, 0.164][0.248, 0.138, 0.211, 0.248, 0.156]0.15[0.189, 0.165, 0.251, 0.295, 0.101][0.176, 0.180, 0.248, 0.293, 0.102][0.138, 0.231, 0.241, 0.285, 0.105]0.23[0.193, 0.188, 0.120, 0.362, 0.137][0.182, 0.182, 0.131, 0.373, 0.132][0.148, 0.170, 0.207, 0.370, 0.104]0.27[0.228, 0.190, 0.288, 0.138, 0.157][0.214, 0.180, 0.272, 0.164, 0.170][0.174, 0.152, 0.232, 0.217, 0.225]0.17[0.213, 0.187, 0.286, 0.347, 0.053][0.205, 0.185, 0.268, 0.311, 0.031][0.174, 0.151, 0.220, 0.255, 0.202] Sensitivity analysis. The values in Table 12 are normalized weight vectors obtained by changing only one weight at a time (keeping the others constant) and normalizing the vector. The notation in Table 12 is expressed as . This study includes an MCDM algorithm based on IVFFL evaluations. Because MCDM results can be susceptible to criterion weights, it is necessary to see how the ranking changes in different scenarios where the weights are changed. Monte-Carlo weight sensitivity analysis does precisely this. Monte Carlo analysis is a global sensitivity analysis performed to model the uncertainty in criterion weights. The aim is to answer the question, “To what extent does the final ranking remain constant when the criterion weights change?” In this case, the weights are sampled using the Dirichlet distribution. The Dirichlet distribution is used to ensure that all weights are positive, that their sum is 1 (normalized), that the weights are equally likely to occur with a given parameter , and to control for sparseness or density. We can explain what is done in each Monte-Carlo example as follows: A random weight vector is generated from the Dirichlet() distribution. For , a uniform random distribution (equal chance for all weight combinations) is found, while for , sparse/more extreme weights are found (e.g. some criteria are minimal, some are very large). Further, when , the weights are balanced, and the weights are close to equality. Using the generated weight vector, alternatives include reaggregation using the IVFFLWA operator in Theorem 4.8, calculating the score using the SC(D) score function (Eq. 9) in Definition 4.4, and obtaining the score ranking for each sample. This process is repeated N times (e.g. ), and the results are combined. The highest score obtained with the score function indicates the best alternative. This process is repeated 3k, 5k, and 10k times, and each sample generates new weights, new IVFFL aggregation, new scores, and a new ranking. The Monte Carlo analysis shows that Incineration, the first-placed alternative, is a leading influence. Landfill, the last-placed alternative, is typically positioned at the bottom. The significant differences between the alternatives suggest that the model is robust to changes in weight. The key factor is the comparison between Chemical and Electromagnetic Sterilization, which exhibit minor changes in the middle positions. This is consistent with the significant distance between the aggregation values in Table 9. Top-1 probabilities are then calculated (Table 13). If the ranking remains constant, the model is quite robust. If the ranking fluctuates significantly, this indicates that the decision-making process is susceptible to the weights. Table 13Top-1 probability (probability of being first).AlternativesTop-1 probabilityDescription (Incineration)Very high ()Most consistently comes out on top (Electromagnetic Wave Sterilization)Sometimes leads (Chemical disinfection)Very low Rarely comes out on top (Encapsulation)Never comes out on top (Landfill)Never comes out on top Top-1 probability (probability of being first). The results in this table show the same trend as the original ranking of the study. We can calculate Position-Based Probability. For example, for K5, the probability of being ranked first is , the likelihood of being ranked second is , the probability of being ranked third is , and the possibility of being ranked fourth or fifth is approximately 0. We can perform these calculations for each alternative. This metric tells us which part of the ranking is stable and which is volatile. From this, in general: (Incineration): first position is very stable, : usually in second place, : locked in the last two positions, never moving, and the most played transitions are between and . For each Monte-Carlo sample, Spearman and Kensal similarity measurements can be performed to measure how similar the resulting ranking is to the original MCDM ranking. In this case, the expected range for Spearman’s results in an average of 0.85–0.95, with a minimum of approximately 0.6. No negative is expected (because the ranking is very stable). These results indicate that the ranking remains largely stable with Monte-Carlo weight changes. Again, the expected outcome for the Kendall is that the mean is approximately 0.7–0.9, and the minimum is approximately 0.4. Thus, is non-negative. Kendall is a more stringent measure and may therefore be slightly lower than the Spearman correlation coefficient. When the Python code in the Appendix for Dirichlet() is run, ten tables (Tables 14 and 15) are generated for various values. These tables contain numerous rows and are therefore not included in this document. The tables and their graphs below are provided to summarize the sensitivity analysis. Table 14Top-1 probability for values.NAlternativeTop-1 probabilityNAlternativeTop-1 probability1.030000.3970.530000.3961.030000.2750.530000.2831.030000.2000.530000.2021.030000.3970.530000.1201.050000.3910.550000.4101.050000.2610.550000.2751.050000.2140.550000.1981.050000.1340.550000.1161.0100000.3800.5100000.3941.0100000.2830.5100000.2851.0100000.2060.5100000.2021.0100000.3960.5100000.120 Top-1 probability for values. Table 15Summary of probabilities.NTop-1 probabilityMost frequently orderMost frequently order probability1.03000:0.397; :0.275; :0.200;:0.397K1,K4,K2,K3,K50.07671.05000:0.391; :0.261; :0.214; :0.134K1,K4,K5,K2,K30.07781.010000:0.380; :0.283; :0.206; :0.396K1,K4,K5,K2,K30.07110.53000:0.396; :0.283; :0.202; :0.120K1,K4,K5,K2,K30.07830.55000:0.410; :0.275; :0.198; :0.116K1,K4,K5,K2,K30.08100.510000:0.394; :0.285; :0.202; :0.120K1,K4,K5,K2,K30.0854 Summary of probabilities. Comparison The continuum of selecting and evaluating alternatives from a small or big pool based on relevant characteristics is known as MCDM. As part of MCDM, a wide range of options are assessed based on several criteria. MCDM methods are implemented to help DMs find the best and most desirable solution to these types of problems. As a result, researchers have initiated many MCDM strategies. We experimented with two MCDM techniques in the FFS framework. To confirm and correct the findings of the offered method, we contrasted the results with the recommended system. An analysis will be conducted to verify the validity of the suggested methodology. The methods used in research53,68–70 and Ref.71 will be applied to the data from the example given in Sect. 5. In Ref.53, the concept of FFLSs is introduced, and its basic properties are examined. New score and accuracy functions are also presented. The study also introduces aggregation operators and distance measures for FFLSs (Definitions are in the Appendix.). Du et al.’s work68 has defined IVPFLSs with a new weighted distance based on IVPFSs. This work presents IVPFLS-based aggregation operators and examines their fundamental properties, such as monotonicity, commutativity, and idempotency (Definitions are in the Appendix.). Garg and Kumar69 developed a new method by integrating LIFS with set pair analysis methods and defined the linguistic connection number. This study examines various operational laws for linguistic connection numbers and proposes new aggregation operators (Definitions are in the Appendix.). Mandal and Seikh70 defined new computational rules and score and accuracy functions for an MADM approach in the IVFF environment. After introducing a new distance measure, they employed the TOPSIS technique to solve the MADM problem in the IVFF environment. They also used the Fermate fuzzy entropy method to determine feature weights. Mandal and Seikh71 presented a score function developed in the q-step orthodouble fuzzy (q-ROF) environment and identified several suitable properties of the given score function. They used the new score function to establish a q-ROF EDAS method for solving MADM problems. For comparison, we will use q = 3 when using this method. A comparison analysis will be performed to ensure that the offered technique is valid. The data from the example presented in Section 5 will be analyzed using the techniques found in studies53, 68–70 and Ref.71. The identical decision matrices and sub-criteria weights were used in the computations of the comparative approaches. Table 16 shows the differences between the compared methodologies. However, all relevant operations () used incineration. The results of the method suggested in this study are comparable to those of the interval-valued Pythagorean fuzzy linguistic sets, linguistic intuitionistic fuzzy sets, and Fermatean fuzzy linguistic sets, with a few little differences. Since the suggested methods analyze criteria and alternatives using IVFFLSs rather than traditional methodology, they aid in the practical and prudent handling of MCDM difficulties. Table 16Comparison.FFLS5343251LIFS6943521IVPFLS6935421IVFF-TOPSIS7043251q-ROF EDAS7134521Our Method34521 Comparison. Advantages of method When total squares are equal to or less than 1, PFS is defined by the degree of satisfaction that members and nonmembers have with the criteria. The expert rarely gives the and a particular property so that the sum of the squares is greater than 1. The PFS cannot effectively handle this occurrence. FFS is one of the most comprehensive methods for overcoming this limitation because it can deal with partially unknown and inconsistent data, which are common in real-world scenarios. It may be inferred from the current investigation and comparison that the outcomes of the offered strategy overlap with those of the available techniques. The primarily benefit of the suggested method over easily accessible DM techniques, however, is that it incorporates additional data and tackles data uncertainty by considering the membership and nonmembership of subattributes considered in the characteristics. The item’s information might be examined more accurately and objectively. In the DM process, it is also a valuable technique for handling inaccurate and imprecise data. As a result, the expected information loss will occur since the purpose behind the score value given to one parameter will not affect the other values. Conversely, there is no discernible loss of information with our proposed method. By detecting the degree of discrimination and similarity between observations, the intended methodology has an advantage over existing methods, stopping incorrect judgments from being formed. Combining inaccurate and ambiguous information is helpful in the DM process. Limitations There are still various issues with this study. First, there is a difference between uncertainty and risk. This study primarily focuses on the effects of risk choice instead of uncertainty preference. Risk aversion is an essential form of uncertainty aversion because it can be challenging to pinpoint the precise likelihood of a MW disposal service and its technology. This work operationalized risk preference using prospect theory. However, a more thorough survey must be developed to identify potential problematic aspects of MW disposal. As a result, the benefit and loss domains associated with MW disposal could not be identified. Future studies should concentrate on integrating specific MW disposal risk indicators with general risk preference standards. Notwithstanding the benefits of the proposed IVFF-based technique, its application in particular DM scenarios is constrained by its inability to evaluate the options thoroughly. Furthermore, when there are many criteria and possibilities, creating IVFFSs might become difficult. To get over these restrictions, we want to broaden our research into the following areas: The applicability of the suggested method is more comprehensive than remanufacturing challenges. To expand its application range, we plan to examine more complex disease management scenarios in life, including business, construction management, and medicine. The applicability of the suggested method is more comprehensive than remanufacturing challenges. To expand its application range, we plan to examine more complex disease management scenarios in life, including business, construction management, and medicine. Another long-term goal is to extend the family of outranking-based interval rough set theory methods, such as IVFF-based VIKOR, ELECTRE, DEMATEL, ANP, FMEA, BWM, and others. Another long-term goal is to extend the family of outranking-based interval rough set theory methods, such as IVFF-based VIKOR, ELECTRE, DEMATEL, ANP, FMEA, BWM, and others. Additionally, we plan to look into how the IVFF values might be integrated with other MCDM strategies. Additionally, we plan to look into how the IVFF values might be integrated with other MCDM strategies. Implications The adverse effects of its unplanned disposal are making MW a serious environmental concern. Medical facilities and healthcare providers need to understand the adverse impact of MW and take appropriate steps to mitigate it. Given the urgent need to dispose of MW and the currently accessible treatment techniques, this study offers a method to help health workers decide which MW disposal options to retain. The study’s implications for healthcare management are as follows: the techniques for MW disposal analysis provide a quick and reliable means of evaluating potential options72. Administrators and practitioners in the healthcare sector may find this very helpful. By using the practical, straightforward techniques provided, healthcare facilities can manage the challenge of choosing a waste-disposal strategy. The suggested methods provide a reliable and valuable means of quickly assessing MW disposal options within this framework. This aids healthcare administrators and practitioners by prioritizing feasible MW disposal alternatives based on the necessary components and resources available to that hospital unit. Our understanding of MW disposal planning, both theoretically and practically, is improved by this study. MW is a significant cause of health and environmental problems73. Medical device adoption has also increased MW, especially among individuals and healthcare professionals. Globally, even with a strong infrastructure, controlling MWe poses significant challenges. The study’s conclusions thus provide a theoretical perspective on the problem of MW and how to address it. The risk analysis in this paper connects the main challenges and complexity of sustainable MW disposal planning. The study’s conclusions can benefit scholars as: (1) It provides advice on effectively managing MW disposal planning. (2) The results could stimulate several initiatives and ideas and assist in resolving the challenges related to MW disposal. The current study rates and categorizes disposal techniques by evaluating generated MW according to several criteria. To put it another way, this study will assist in determining the best and worst disposal practices, guaranteeing that MW–which presents a risk–is disposed of most appropriately. Governments must prepare the best way to eliminate MW to save money and safeguard public health. Theoretical implications are: Ideas for improving the IVFFLS approach, Ideas for improving the IVFFLS approach, Knowledge about alternative approaches to MW disposal, Knowledge about alternative approaches to MW disposal, A thorough comprehension of the research techniques employed. A thorough comprehension of the research techniques employed. It made a significant contribution to the literature. It provided insight into MW disposal planning in a novel setting by determining an MCDM strategy by considering aggregation operators and score-accuracy functions based on IVFFLS. The IVFFLS methodology is another real-world implementation that combines the benefits of interval-valued and fuzzy methods. Fuzzy logic is utilized in place of conventional numerical ratings when evaluations are given in linguistic values to enhance understanding and interpretation. Numerous studies in the waste management literature have addressed this type of integration, and several suggestions have been made for resolving obstacles and reducing limitations. The methodology used in this study provides a framework for producing results that operate together by using more accurate and valuable measurements than previous approaches. The proposed framework assists regulators and companies in recognizing the significant challenges of implementing a successful MW disposal planning system. In order to address sustainability concerns, the study mainly contributes to the corpus of knowledge about recognizing and evaluating barriers to MW disposal system implementation. The study’s theoretical and methodological ramifications are as follows: The flexible architecture of the proposed methods enables them to be extended to any new decision-making problem with the appropriate mathematical software. The alternative assessment matrix serves as the basis for recording all preference variables in the criterion. However, option ranking is made possible by the score-accuracy functions of the suggested approaches. As the user chooses the parameter value according to the problem type, this method is flexible and dynamic and may be used in various decision-making scenarios. The administrative ramifications of incineration technology must be considered. Implementing incineration as a MW disposal option requires significant infrastructure and equipment investments. The operational features of incineration, such as the cost of equipment and maintenance and the availability of suitable facilities, must therefore be carefully assessed. The initial expense of posing as an incinerator for MW may be high, but there may also be long-term financial benefits. The use of incineration requires approval from the regulatory body in charge of environmental protection and waste management74, 75. The necessary permits must be acquired to avoid penalties or legal issues. Implementing incineration requires the involvement of stakeholders, including local communities and governmental organizations. It is crucial to provide these stakeholders with relevant information on incineration’s benefits and potential risks, as well as any safety and environmental preservation measures. Implementing incineration will require training and teaching for staff members and other stakeholders. This includes training on the benefits and limitations of the technology and how to use the equipment safely. It is possible to make the incineration process more effective and efficient over time, but these developments must be regularly watched. As a result, it is imperative to regularly evaluate the incineration process and identify areas that require improvement. Beyond its theoretical contribution, the study’s findings have several important implications for practitioners, scholars, and policymakers. The research findings support the basic notion that may help sustainability and environmental management understand the importance of an effective MW disposal system in emerging economies. This can increase the financial value of effective MW disposal methods in physical and intangible forms, guarantee sustainability and human well-being, pinpoint the primary adoption barriers, and provide strategic choices for the successful implementation of MW disposal. This study emphasizes that effective MW disposal is important for sustainable development and operational excellence. According to the study’s findings, the government and regulatory agencies must implement MW disposal practices to preserve sustainability. In order to effectively manage the system and actively participate in MW disposal program implementation, the government and regulatory agencies must supervise adequate resources. From a public health standpoint, hospitals are accountable for the trash they generate. They must ensure that the environment and public health will not be harmed by how trash is handled, treated, and disposed of. Managerial insights The interval-valued Fermatean fuzzy linguistic COPRAS-based decision support model developed within the scope of this study offers significant managerial implications for healthcare administrators and local governments in decision problems with high levels of uncertainty, such as the selection of medical waste disposal technology. (1) More reliable decision-making by representing uncertainty more realistically Hospital administrators and municipal/waste management authorities often evaluate criteria not with precise numerical values, but with linguistic expressions such as “high cost,” “medium risk,” and “very safe.” The proposed IVFFLS-based model, rather than reducing these linguistic evaluations to a single point, treats them as intervals, directly reflecting decision-makers’ hesitations during the decision-making process. Thus, decisions become more realistic and reliable compared to classical fuzzy or exact methods. (2) More balanced strategic evaluation among conflicting criteria In medical waste disposal, criteria such as cost, environmental impact, public health risk, technical feasibility, and legal compliance often conflict with each other. This study, thanks to its COPRAS-based approach, simultaneously evaluates both benefit and cost criteria, preventing managers from making erroneous decisions that focus solely on cost, and thus supporting a more balanced strategic choice. (3) Clearly showing the strengths and weaknesses of alternatives Due to the structure of the COPRAS method, the positive (benefit) and negative (cost) aspects of each alternative are calculated separately. This shows decision-makers not only the “best alternative” result, but also which criteria each alternative is advantageous or disadvantageous on. Thus, managers can see more clearly: In which criteria a particular alternative needs improvement, In which criteria a particular alternative needs improvement, Which criteria have the most significant impact on the decision outcome? Which criteria have the most significant impact on the decision outcome? In which areas do differences exist between alternatives? In which areas do differences exist between alternatives? (4) Guiding resource allocation and investment prioritization The criterion weights and ranking results presented in the study show decision-makers which factors are more critical. In this way, hospital management or local administrations can more clearly determine: Which infrastructure investments should receive budget allocation, Which infrastructure investments should receive budget allocation, Which environmental/operational risks should be prioritized for management, Which environmental/operational risks should be prioritized for management, Which technological deficiencies should be addressed to achieve better results? Which technological deficiencies should be addressed to achieve better results? For example, if the results highlight the incineration method, managers can strategically evaluate its advantages in terms of health safety and compliance with environmental regulations, despite its cost. (5) Strengthening Health, Safety, and Regulatory Compliance Medical waste management is not only an operational issue but also a critical issue in terms of legal regulations and public health. This study systematizes the decision-making process, enabling managers to incorporate factors such as regulatory compliance, public health risk, and infection control into the decision model. This can prevent large-scale consequences such as: Criminal penalties, Criminal penalties, Environmental damage, Environmental damage, Epidemic risks, Epidemic risks, (6) Increasing Consensus in Group Decision-Making Processes In real life, medical waste management decisions are not made by a single person; they involve stakeholders such as hospital administrators, infection control committees, environmental engineers, and municipal representatives. The proposed approach integrates diverse expert opinions using an interval-valued Fermatean fuzzy linguistic structure, thereby increasing consensus in the group decision-making process. This makes the decision-making process more transparent and increases stakeholders’ acceptance of the decisions. (7) Sensitivity Analysis, Risk Reduction, and Decision Soundness The study’s sensitivity analysis shows how the ranking of alternatives changes when the criterion weights change. This analysis enables managers to: Understand which criteria the decision is sensitive to, Understand which criteria the decision is sensitive to, Develop a data collection plan to reduce uncertainty in critical criteria, Develop a data collection plan to reduce uncertainty in critical criteria, Identify risk-reducing strategies through “decision soundness”. Identify risk-reducing strategies through “decision soundness”. In this respect, the model can be used not only as a “choice-making” method but also as a risk management tool. (8) Contribution to Sustainable Waste Management Strategies for Policymakers The results of the study are meaningful not only at the hospital scale but also for institutions developing health policies at the regional or national scale. Especially considering the limited medical waste management infrastructure in developing countries, this decision support model offers a systematic evaluation framework that can be used for: Determining sustainable medical waste disposal strategies, Determining sustainable medical waste disposal strategies, Investment planning, Investment planning, Designing regulatory policies to reduce environmental impact. Designing regulatory policies to reduce environmental impact. Therefore, the proposed IVFFLS-COPRAS-based decision support approach is not only a theoretical contribution but also a practical management tool that enables healthcare organizations and public authorities to make more reliable, transparent, and sustainable decisions in selecting medical waste disposal technologies. Conclusion This study proposed a comprehensive DM framework grounded in IVFFLs, a newly developed mathematical structure designed to model complex forms of linguistic uncertainty. By establishing the algebraic foundations and ordering principles of this framework, introducing a wide family of tailored aggregation operators, and formulating an effective score function, the study provides a complete methodological toolkit for MCDM problems characterized by ambiguity, hesitation, and conflicting expert judgments. The application to the medical waste disposal problem demonstrated the practical relevance and robustness of the proposed approach. The resulting ranking is stable across diverse parameter conditions, as confirmed through extensive robustness checks, sensitivity analysis, and comparison with the IVFFL–COPRAS method. The consistency of the results relative to established fuzzy and classical DM techniques further validates the reliability and interpretability of the proposed model. Overall, the study advances the frontier of fuzzy MCDM by integrating interval-valued reasoning with Fermatean fuzzy linguistic modeling, enabling a more nuanced representation of expert knowledge. The findings highlight the potential of the proposed framework to support decision-making in domains where linguistic vagueness and hesitation are inevitable. Future research may extend this framework to group decision-making environments, dynamic decision processes, or hybrid models that incorporate probabilistic or evidential reasoning. Appendix Inspired by the idea of PFL variables, a new fuzzy variable called the IVPFL element is proposed based on IVIFS in Ref.68: The set is called IVPFLS, where , and . The hesitation level of z is identified as . are two sets of some interval values in [0, 1], denoting the possible membership degrees and non-membership degrees of the element to the set . For two IVPFLNs and . For , , , , , , , . . Liu et al.53 proposed the FFLTS, which is constructed based on LTS and FFS. The set is called FFLS, where , and . The hesitation level of z is identified as . represent the membership degree and the nonmembership degree of to . Let and be any two FFLNs, . The FFL Hamming distance and FFL Euclidean measures between are defined as Linguistic intuitionistic fuzzy set (LIFS)69 is defined by th set , where represented by linguistic membership and non-membership degrees and . For a FFLN, the score and accuracy functions are defined as Set pair analysis is a modern uncertainty theory that overlaps with other uncertainty theories, including probability, vague, rough, and fuzzy theories. It provides a different way to express the uncertainty, treating certainty and uncertainty as an integrated system of an object. A set pair, H(A, B), consists of two interdependent sets A and B under the problem W. The most important feature of the SPA is to analyze the system on “identical”, “discrepancy”, and “contrary” features of a given problem W and set up a connection number for it. In it, if out of the total number of features (N), the identity and contrary features are denoted by S and P, respectively, such that is neither identity nor contrary of the sets A and B, then the connection number () is represented as , where , , and represents the “identity”, “discrepancy”, and “contrary” degrees such that and ; , and are the coefficients of “discrepancy and contrary” degrees, respectively. If and be two connection numbers, then Let be a continuous linguistic term set. A linguistic connection number is defined as , where represents the “identity”, “discrepancy”, and “contrary” degrees, respectively, such that and ; , and are the coefficients of “discrepancy and contrary” degrees, respectively. Let be an linguistic connection number, then relatively certain probability power of the linguistic connection number as . Author contributions All authors equally contributed to the design and implementation of the research, the analysis of the results, and the writing of the manuscript. Funding This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors. Data availability No datasets were generated or analysed during the current study. Declarations Competing interests The authors declare no competing interests. Ethical approval This article does not contain any studies with human participants or animals performed by any of the authors. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. References Associated Data Data Availability Statement No datasets were generated or analysed during the current study.