Application of filters in the mapping of potential gold-bearing structures using magnetic and radiometric data Authors: Ali B. M. Ali, Narinderjit Singh Sawaran Singh, Luma Hussain Saleh, M. Sudhakara Reddy, Badri Narayan Sahu, Sridharan Sundharam, Sanjeev Kumar, Aseel Smerat, Akmal Abilkasimov, Doniyor Jumanazarov, Stephen Eguba Ekwok, Edward Augustine Thompson Published: 2026 ABSTRACT This inclusive innovation study aimed to generate a high-resolution metallogenic potential map of the mineral-rich Oban Massif in southeastern Nigeria by integrating structural, lithological, and hydrothermal alteration indicators from airborne geophysical data. A comprehensive suite of high-resolution airborne magnetic and radiometric data was processed. The total magnetic intensity data (TMI) as well as grids of first and second vertical derivatives (FVD, SVD), analytic signal (ASIG), tilt angle derivative (TAD), and total horizontal derivative (THD) were subjected to the Centre for Exploration Targeting (CET) procedure to elucidate the subsurface architecture. The analysis revealed a polyphase deformation history dominated by a NE-SW structural trend, which provides critical migration pathways for mineralizing fluids. A direct spatial correlation was established between elevated magnetic intensities and anomalous potassium concentrations, delineating a prospective zone for igneous-related gold mineralization. Lithological diversity, including shales, hornfels, gneiss, schist, and granitoids, was identified. Radiometric K/Th ratios ranging from -0.5 to 1.5 %/ppm were recorded, with specific anomalous zones (exceeding the background range of 0.16–1 %/ppm) signaling potential for gold-silver, polymetallic, molybdenum, tungsten, and rare earth element deposits. Depth estimates from source parameter imaging (SPI), standard Euler deconvolution (SED), and 2-D forward modeling indicate sediment thicknesses extending to approximately 2580 m. The outcome is a new, targeted framework that moves beyond regional assessment to define specific exploration targets, thereby providing a direct tool for identifying prospective mineralization hosts within the Oban Massif. Introduction The geological framework of Nigeria is a product of distinct tectonic regimes. The Precambrian Basement Complex records a history of regional tectonothermal events, while the Phanerozoic Benue Trough is interpreted within models of global plate tectonics1, 2. This complex evolution has established several distinctive metallogenic provinces. Notably, the Precambrian basement, structurally reworked by the emplacement of Younger Granites, hosts significant mineral belts containing cassiterite (tin), columbite-tantalite (niobium-tantalum), wolframite (tungsten), native gold, and lead-zinc sulfides3, 4 (Woakes et al. 1987). As Nigeria pursues sustainable economic diversification, the strategic development of these vast but underexplored solid mineral resources has become a national priority5, 6. A critical component of this basement terrain is the Oban Massif in southeastern Nigeria. It is dominated by high-grade metamorphic and igneous rocks, including migmatites, granitic gneisses, schists, and intrusions of older granites and pegmatites7, 8. The massif was profoundly affected by the Pan-African orogeny (~600 Ma), which produced pervasive NE–SW and NW–SE trending shear zones, faults, and folds7, 8. These structures are fundamental controls on hydrothermal fluid migration and have been extensively linked to ore-forming processes9, 10, 11, 12, 13, 14. The area is considered prospective for a range of minerals, including gold, columbite, cassiterite, rare earth elements, and uranium8,7. Despite its recognized mineral potential, the transition from known occurrences to quantified resources within the Oban Massif and similar terrains has been severely limited. This is due to the inherent geological complexity—characterized by polyphase deformation, deep weathering profiles, and intricate structural controls on mineralization—which renders traditional exploration methods based on surficial mapping and artisanal workings largely ineffective for discovering blind or subsurface deposits5, 15. Consequently, integrated geophysical and geological approaches have become indispensable for modern exploration4. However, a significant gap exists in the Oban Massif: the absence of high-resolution, geophysically derived structural maps. This gap has contributed to uncontrolled, artisanal mining activities, leading to environmental degradation, public health risks, and socio-economic challenges16. There is, therefore, a pressing need for a detailed subsurface structural analysis to guide systematic, sustainable mineral exploration and resource management in the region. This study aims to address this critical gap by conducting a high-resolution geophysical investigation of the Oban Massif to delineate its subsurface structural architecture and identify prospective zones for mineralization. To achieve this, we employ integrated airborne magnetic and radiometric datasets, leveraging advanced analytical techniques. Airborne magnetic surveying is a powerful, non-invasive tool for mapping geological structures, lithological boundaries, and magnetic anomalies associated with mineralization17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27. Its applications span from regional geological mapping21, 28, 29 to archaeological, geothermal, and hydrocarbon exploration17, 18, 30, 31. While challenges such as overlapping anomalies in complex terrains exist, advancements in high-resolution instrumentation and processing techniques have greatly enhanced data quality and interpretative power21, 32, 33, 34, 35. Radiometric data serves as a crucial complement to magnetic data in mineral exploration36 (Geological Survey of Canada, 1992). Combined magnetic-radiometric surveys are particularly effective for investigating polymetallic-magmatic hydrothermal systems, including deposits of gold, zinc, lead, silver, uranium, and copper14, 36, 37, 38. Hydrothermal alteration often perturbs potassium concentrations, making radiometric potassium channels a key indicator for tectonically influenced, mineralized zones14, 39 In this research, we analyze high-resolution airborne magnetic and radiometric data over the Oban Massif. Our methodology involves: (1) applying the CET (Centre for Exploration Targeting) grid analysis tool to the Total Magnetic Intensity (TMI) and enhanced maps (First Vertical Derivative-FVD, Second Vertical Derivative-SVD, Analytical Signal-ASIG, Tilt Angle-TAD, and Total Horizontal Derivative-THD) to generate detailed structural lineament maps; (2) processing radiometric data to produce total count and ternary composite images; and (3) applying depth estimation techniques (Source Parameter Imaging-SPI and Spectral Depth Analysis-SED) and 2D forward modeling to the magnetic data. The final integration of these geophysical results with existing geological knowledge will map zones where high magnetic and potassium intensities coincide with major structures. These integrated anomalies provide critical insights into lithological variations and highlight priority targets for gold-related and radioactive mineralization14, 39, thereby furnishing a foundational geophysical framework for future systematic exploration. Location and geology of Oban Massif Oban Massif is situated in the southeastern part of Nigeria (Fig. 1), and is known for its abundant mineral and geological resources40, 41, 42. The area is part of the Pan African mobile belt and falls between the West-African and Congo Cratons and south of the Tuareg Shield40, 41. Approximately 50% of the landmass of Nigeria is dominated by the Precambrian basement rocks42 and straddle into the adjoining Cameroon and Benin Republics in the east and west respectively.Fig. 1Geologic map of the study area. Geologic map of the study area. The Oban Massif shares is bordered by the Ikom-Mamfe Rift, Cameroon Volcanic Line, Benue Trough and Calabar Flank in the north, east, west and south respectively. The major rock units in the area are phyllites, schists, gneisses, migmatites and amphibolites. Phillites, schists and granodiorite-syntectonic granitoid42, 43, 44, 45, 46. The eastern part is largely occupied by migmatite and granite gneisses43, 45. These rocks are intruded by pegmatitic granites, granodiorites and olivine dolerites43, 47, 48. According to Oden et al.45 most prominent fractures in the Oban Massif are oriented in a predominantly NNW-SSE direction with a trend of 150°-160° from the north. However, there are other minor fractures that trend in a NNE-SSW, E-W and NW-SE directions45. Data acquisition To properly map subtle and prominent magnetic and radiometric anomalies, the high resolution airborne magnetic and radiometric datasets acquired by Fugro Airborne Services, Canada were applied in this study. The data which were collected, reduced and complied between the years 2005 – 2010 were gotten from the Nigerian Geological Survey Agency, Abuja. The magnetic data were collected using the Flux-Adjusting Surface Data Assimilation System using a terrain clearance that varied from 80–100 m, tie line space of 500 m, and flight-line space of 100 m. Aero-radiometric data were collected using an integrated system with an Advanced Digital Spectrometer (ADS model RS-500) mounted on aircraft. The ADS which is a high resolution (1024 channel) gamma spectrometer was use for measurement at mean terrain clearance of 80 m. Since gamma-rays are intensely attenuated with depth, most of the radiations originate from near surface, with about 90% of the measured gamma-rays emanating from the top overburden materials (30 - 45 cm) of density 1.5 g/cm349. Absolute correction was employed to extract absolute reflectance of scene targets at the surface of the earth. Also, relative radiometric reduction was used to reduce atmospheric and other unexpected variation among multiple imageries by modifying the radiometric properties of target images to match a base image. Methods used Computing the FVD is like measuring the vertical gradient using a magnetic gradiometer. It enhances the response of short wavelength magnetic features, thereby highlighting the resolution of magnetic anomalies. The formula for FVD is given by1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$FVD = \frac{\partial A}{{\partial z}}$$\end{document} where A is the magnetic field data and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\frac{\partial A }{\partial z}$$\end{document} is the vertical derivative. The Second Vertical Derivative technique amplifies noise because of the higher order of the derivation filter. However, its application requires high-quality data50. SVD is expressed as:2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$SVD = \frac{{\partial^{2} A}}{{\partial z^{2} }}$$\end{document} where A is the magnetic anomaly field intensity value. At a higher-order derivative above the second order, the noise becomes clearer than the signal. The formula for the wave-number domain filter to generate the nth derivative is given by50.3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$F\left(\omega \right)={\omega }^{n}$$\end{document} Maximum anomalies over magnetic sources are effectively delineated using the ASIG51, 52. ASIG is particularly valuable in low magnetic latitude regions, where the Earth’s magnetic field has near horizontal orientation51, 53. The amplitude of the analytic signal, as described by Roest et al.53, incorporates the three orthogonal derivatives of the magnetic field data:4\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left| {ASIG_{{\left( {x,y} \right)}} } \right| = \sqrt {\left( {\frac{\partial A}{{\partial x}}} \right)^{2} + \left( {\frac{\partial A}{{\partial y}}} \right)^{2} + \left( {\frac{\partial A}{{\partial z}}} \right)^{2} }$$\end{document} where A is the acquired magnetic data. The TAD is less susceptible to noise compared to other enhancement techniques that involve higher order derivatives. It serves as an effective tool for delineating the edges of geological structures responsible for magnetic anomalies. TAD is defined as the arctangent of the ratio between the vertical and horizontal derivatives of the magnetic field, and is given by:5\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\theta = \tan^{ - 1} = \frac{{\frac{{\partial^{2} A}}{{\partial z^{2} }}}}{{THD_{{\left( {x,y} \right)}} }}$$\end{document} The THD, is a commonly applied filter for the detection of magnetic edges54. The THD is given as:6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$THD_{{\left( {x,y} \right)}} = \left[ {\left( {\frac{\partial A}{{\partial x}}} \right)^{2} + \left( {\frac{\partial A}{{\partial y}}} \right)^{2} } \right]^{{\tfrac{1}{2}}}$$\end{document} where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\frac{\partial T}{{\partial x}}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\frac{\partial T}{{\partial y}}$$\end{document} are the two orthogonal horizontal-derivatives of the magnetic data, and the magnetic anomaly is A. The Centre for Exploration Targeting (CET) method encompasses various image processing techniques aimed at analyzing structural complexity, detecting lineaments, performing texture analysis, and vectorizing structural features. This workflow integrates grid-based texture analysis, edge detection, thresholding, lineament extraction, and the identification of structurally complex zones55, 56, 57 (Fig. 2). In CET analysis, phase symmetry is preferred over phase congruence because of its superior ability to identify symmetric geological features such as faults and lineaments, which are essential for structural interpretation58. Phase symmetry also demonstrates greater resilience to noise and contrast variation, resulting in more distinct delineation of structural boundaries, while phase congruence is more susceptible to noise due to its emphasis on contrast and edge detection58.Fig. 2The flow chart of the CET algorithm applied to magnetic data. The flow chart of the CET algorithm applied to magnetic data. A key component of the CET framework is the trend mapping menu, specifically developed for edge detection in potential field data. This tool incorporates two distinct techniques—standard deviation and entropy—to estimate structural trends such as edges and ridges in texture55, 56, 57. The entropy plugin, when applied to localized data windows, quantifies the textural information by discretizing the data into a specified number of bins. It calculates the number of unique values within each quantized neighborhood and uses this to assess the statistical randomness (or uncertainty) of local data distributions58, 59. For a given cell I within a k × k neighborhood and a defined number of bins n, the entropy is computed as follows58, 59:7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E = - \sum\limits_{i = 1}^{n} {p_{i} \log p_{i} }$$\end{document} where the histogram of n bins has been normalized to create the probability p. Standard deviation offers a measure of local variability within the data. For each grid cell, it quantifies the spread of surrounding data values, capturing fluctuations relative to the background signal. Significant geological features often exhibit higher variability compared to the surrounding areas. For a window containing N cells with a mean value μ, the standard deviation σ of the cell values xᵢ is calculated as:8\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma = \sqrt {\frac{1}{N}\sum\limits_{i = 1}^{N} {(x_{i} - \mu )^{2} } }$$\end{document} The Source Parameter Imaging (SPI) technique typically produces image outputs that allow for the estimation of depths to geological sources60. Based on the approach by Smith et al.60 SPI utilizes the analytic signal and the second vertical derivative of the magnetic field. This method aids in constructing a plausible geological model. Unlike the Structural Edge Detection (SED) method, SPI is independent of magnetic field direction for 2D sources but dependent for 3D sources61. Notably, SPI does not require reduction-to-pole processing, as the estimated depths are unaffected by the inclination and declination of the Earth’s magnetic field. When combined with a sound understanding of the regional geology, SPI facilitates more straightforward interpretation of magnetic data62. The SPI-derived depth estimates are often linked to the wavelength of the analytic signal. Following Nabighian51, the analytic signal, A1(x,z) is defined as:9\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$A_{1} \left( {x,z} \right) = \frac{{\partial M\left( {x,z} \right)}}{\partial x} - j\frac{{\partial M\left( {x,z} \right)}}{\partial z}$$\end{document} j is the imaginary number, x and z are Cartesian coordinates for the horizontal and the vertical directions perpendicular to the strike respectively, and M(x, z) is the magnitude of the anomalous total magnetic field. The Euler homogeneity equation provides apparent depth to the magnetic bodies. This technique connects the magnetic field and its gradient components to the location of the magnetic anomaly, with the degree of homogeneity described as a structural index (SI)51. Equation 8 is used to define the Euler’s homogeneity:10\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {x - x_{0} } \right)\frac{\partial T}{{\partial x}} + \left( {y - y_{0} } \right)\frac{\partial T}{{\partial y}}\left( {z - z_{0} } \right)\frac{\partial T}{{\partial z}} = N\left( {B - T} \right)$$\end{document} where (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x_{o} ,$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$y_{o} ,$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z_{o}$$\end{document}) is the location of the magnetic source whose total field (T) is observed at (x, y, z). N, a measurement of the magnetic field fall-off rate, can be taken to be the structural index (SI), and B is the local magnetic field. The technique entails picking a suitable SI value, and deciding the equation for the best \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x_{0}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$y_{0}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z_{0}$$\end{document} and B by means of least-square inversion. Additionally, a square window size of 5x5 for smoother results and noise reduction was used. Radiometric data analysis begins with the removal of distortions and the application of micro-levelling techniques to ensure data consistency before enhancing the grids to produce total count imagery63. The total count typically represents the combined gamma radiation detected from naturally occurring isotopes of uranium, thorium, and potassium, and is commonly used in geological investigations63. Effective interpretation of radiometric data requires comparing the observed values with established geological models. Analyzing the distribution and variability of potassium, thorium, and uranium concentrations can provide valuable insights into the underlying geological processes and aid in estimating potential mineralization63. Radiometric data are usually displayed as color-coded maps, with each color corresponding to specific intensity levels. Alternatively, a ternary image can be generated by combining the concentrations of potassium (red), thorium (green), and uranium (blue) into a single RGB composite, offering a more integrated visualization. Unlike other airborne geophysical methods, radiometric surveying lacks precise mathematical models for calculating the theoretical response from specific sources63. Therefore, radiometric data interpretation is analogous to reading traditional geological maps and often requires integration with geochemical or geological sampling results. Correlating such datasets with radiometric ternary maps enhances the reliability and depth of geological interpretations. Results Interpretation of enhancement and CET maps The total magnetic intensity data (Fig. 3) were subjected to short and long wavelength enhancement operations involving FVD, SVD, TAD, THD, ASIG, and UC after the application of reduction to equator filter (RTE). The gridded high frequency maps (Figs. 4, 5, 6) that were qualitatively evaluated revealed inter-connected short wavelength geologic structures that trended majorly in the NE-SW direction. The observed concentrated red-pink coloration zones (Figs. 4, 5, 6) indicate a structurally complex basement characterized by shear zones, fold belts, and interconnected fault systems, which are attributed to past orogenic activities15, 64. These orogenic faults and fractures which are interconnected and deeply seated are unconformably overlain by thin Cretaceous-Recent sediments65, 66, 67.Fig. 3Total magnetic intensity data reduced to the equator with the modelled NW-SE profile line.Fig. 4(a) First vertical and (b) second derivatives maps.Fig. 5(a) Tilt angle and (b) total horizontal derivatives maps.Fig. 6Analytic signal map. Total magnetic intensity data reduced to the equator with the modelled NW-SE profile line. (a) First vertical and (b) second derivatives maps. (a) Tilt angle and (b) total horizontal derivatives maps. Analytic signal map. The analytic signal (Fig. 6) operation which was carried out with the object of mapping the main magnetic sources of the study area, revealed regions with the high (yellow-pink = 0.174-0.1836 nT/m2) and low (blue-lemon green = 0.0032-0.0150 nT/m2) magnetic intensities. The magnetic anomalies display NE-SW orientation in line with the regional tectonics of the study area45. Furthermore, the ASIG map (Fig. 6) reveals pronounced maxima (red-pink zones) concentrated over discrete magnetic bodies and boundary regions, indicating the primary sources of magnetization within the Oban Massif21. These high magnetic signatures are largely attributed to tectonic activities associated with the massive invasion of the older granites by the younger granites. This invasion resulted in a series of metamorphism68, folds, faults, and shear zones69, 70, reflecting the post-orogenic events69. Figs. 7, 8, 9, 10, show CET structural maps obtained from the total magnetic intensity, TMI upward continued 200 m, FVD, SVD, TAD, THD and ASIG grids. This procedure is an enhancement of the Figs. 4, 5, 6 gridded maps that assisted in the creation of comprehensive structural maps that serve as valuable guide for reconnaissance mineral investigation program of the study area. The structural maps (Fig. 7a and c) obtained from the total magnetic intensity and TMI upward continued to 200 m, reveal a major NE-SW and minor E-W directions (Fig. 7b and dThe CET lineation maps (Fig. 8a and c) generated from the FVD and SVD grids showed geologic structural patterns of mainly NE-SW (Fig. 8b and d). Furthermore, Fig. 9a and c as well as Fig. 10a structural maps generated involving TAD, THD and ASIG gridded maps showed dominant NE-SW trend (Fig. 10b and d and Fig. 10b). However, Fig.9a geologic structural map is observed to be somewhat diffused. Generally, the structural maps Figs. 7a&c, 8a&c, 9a&c,.10 adetected both short and long wavelength geologic structures. The long wavelength geologic structures are somewhat interconnected and maintained a NE-SW orientation. Furthermore, it is noticed that the northwestern and southeastern flanks that bordered parts of the Calabar Flank and Benin Formation respectively, are relative devoid of these geologic structures. The main lineaments orientation of NE-SW indicated by the rose petals Figs. 7a&c, 8a&c, 9a&c, 10a signify the regional strike direction of the study area45. The complex structural patterns of the lineaments Figs. 7a&c, 8a&c, 9a&c, 10a are induced by the emplacement of younger granites into older granitic formations. This magmatic activity led to successive episodes of metamorphism68, accompanied by the development of folds, faults, and shear zones69, 70. These multiple deformation phases produced structural discontinuities such as unconformities, shear zones, and fault systems, which have significantly shaped the architecture of the basement complex68,69,45,70.Fig. 7(a) CET structural map of total magnetic intensity grid, (b) rose diagram of structural map of the total magnetic intensity grid, (c) CET structural map of TMI upward continued 200 m, and (d) rose diagram of structural map of the TMI upward continued 200 m.Fig. 8(a) CET structural map of FVD grid, (b) rose diagram of FVD structural map, (c) CET structural map of SVD grid, and (d) rose diagram of SVD structural map.Fig. 9(a) CET structural map of TAD grid, (b) rose diagram of TAD structural map, (c) CET structural map of THD grid, and (d) rose diagram of THD structural map.Fig. 10(a) CET structural map of ASIG grid, (b) rose diagram of ASIG structural map. (a) CET structural map of total magnetic intensity grid, (b) rose diagram of structural map of the total magnetic intensity grid, (c) CET structural map of TMI upward continued 200 m, and (d) rose diagram of structural map of the TMI upward continued 200 m. (a) CET structural map of FVD grid, (b) rose diagram of FVD structural map, (c) CET structural map of SVD grid, and (d) rose diagram of SVD structural map. (a) CET structural map of TAD grid, (b) rose diagram of TAD structural map, (c) CET structural map of THD grid, and (d) rose diagram of THD structural map. (a) CET structural map of ASIG grid, (b) rose diagram of ASIG structural map. Interpretation of radiometric maps Gamma-ray spectrometry is useful for studying regolith and sediments14, 36, though weathering can alter radioelement distributions11, 14. High potassium (K) concentrations (red-pink, Fig. 11a) in the northwest and east indicate lithologies like shale, illite, granite, and pegmatite, while moderate (orange-yellow) and low (blue) values correspond to mafic rocks and basalts or peaty/chalky sediments, respectively14, 71. Potassium depletion is linked to high calcium, liming, or low soil pH14, 71. High thorium (Th) (red-pink, Fig. 11b) in a NE-SW trend suggests weathered shale, alluvium, or felsic minerals14, 36. Areas with sporadic high and low Th (blue) in the central, north, and southeast indicate altered rocks, mafic minerals, lithological boundaries, or faults where hydrothermal activity leached Th36,11,14.Fig. 11Maps of (a) K and (b) Th concentrations. Maps of (a) K and (b) Th concentrations. High uranium (U) (red-pink, Fig. 12a) in the west, south, and east delineates granitoids, attributed to Pan-African hydrothermal fluids affecting the Precambrian basement and subsequent alteration forming residual clays and U-bearing minerals14, 64, 66, 67, 72. The ternary image (Fig. 12b) combines K (red), Th (green), and U (blue) intensities, showing disparities with the geologic map (Fig. 1) due to differing data acquisition methods and intense chemical weathering in the Oban Massif, which creates thick saprolite and laterites72, 73, (Ekwere & Ekwueme, 1989). Weathering leaches K from felsic rocks while residually enriching Th and U in laterites, and slope processes displace radiometric signatures74, 75, 76, 77, 78. Radiometric data reveal geochemical variations often missed in field mapping72, 79. High K in the north, central, east, and southeast suggests granitoids or hydrothermally altered mafic rocks in structurally complex zones14, 36, while other areas show a mixed radiometric response. These lithologies are typically found in structurally complex zones marked by faults, fractures, lithological borders, and zones of prominent hydrothermal modification and silicification36, 14.Fig. 12Maps of (a) U concentration and (b) ternary image. Maps of (a) U concentration and (b) ternary image. Interpretation of SPI and SED depth maps. The evaluation of spatial depths to magnetic sources, conducted using SPI and SED procedures11, is critical for understanding the structural framework controlling mineralizing systems. These methods delineate the geometries of both isolated and clustered magnetic bodies, which often correspond to intrusive bodies, basement highs, or lithological contacts that can act as fluid conduits or structural traps. The SPI results (Fig. 13a) reveal a two-tiered structural architecture. Shallow magnetic sources, at depths of approximately −101.5 to −326.5 m (pink to yellow), may represent near-surface intrusions or fault-bound blocks that localize near-surface hydrothermal activity. Deeper magnetic bodies, ranging from −326.5 to −2335.7 m (lemon green to blue), likely correspond to the roots of these systems or major crustal structures that served as pathways for deeper-sourced mineralizing fluids80. The SED analysis (Fig. 13b), optimized for geologic contacts with a structural index (SI) of zero, further refines this model. It delineates shallow magnetic contacts (111.2 to 580.4 m,blue to lemon green) and deeper ones (580.4 to 2470.3 m; yellow to pink), mapping the fault and lithological boundary network critical for fluid migration.Fig. 13Depth determination maps of (a) SPI and (b) SED (SI=1.0). Depth determination maps of (a) SPI and (b) SED (SI=1.0). Collectively, the depth maps (Fig. 13) identify zones of thickened metasedimentary cover and weathered materials, which can act as geochemical caps or host sequences. The predominant sedimentation of up to ~2470.3 m indicates significant burial, suggesting that key structural features and potential mineralization may be concealed. Therefore, the identified deep-seated contacts and magnetic bodies are not merely geometric features; they highlight prospective structural corridors where focused fluid flow and subsequent mineral deposition were most probable. The 2D forward magnetic model along a NW-SE profile (Fig. 14) reveals a faulted and structurally complex basement architecture with a maximum depth of approximately 1000 m. This model depicts a highly deformed basement characterized by an undulant surface and multiple fault systems. This structural complexity is attributed to polyphase orogenic activity and tectono-magmatic events, including the emplacement of Pan-African younger granites into older formations45, 68, 69, 70. From a mineral exploration perspective, this faulted basement architecture is highly prospective. The network of faults and fractures creates critical pathways for hydrothermal fluid migration and provides structural traps for mineral deposition81, 82. The relatively shallow basement depths in parts of the model indicate that these potentially mineralized structures are within practical drilling reach.Fig. 142D forward model obtained from the NW-SE oriented profile. 2D forward model obtained from the NW-SE oriented profile. Discussion of results This study is carried out to establish a high-resolution exploration framework for the Oban Massif by defining the structural architecture, alteration patterns, and depth to geologic structures to identify specific, high-priority mineralization targets. The findings, which are derived from integrated airborne magnetic and radiometric data, show significant alignment with regional geological models while also revealing critical divergences that refine the understanding of this specific mineral district. The NE-SW dominant trend obtained from the various structural maps (Figs. 8, 9, 10, 11, 16) generated through CET processing techniques58, 59 reveals a coherent, polyphase structural fabric dominated by a NE-SW orientation. This finding is in strong agreement with the extensively documented regional structural grain of the West African Craton, which is characterized by NE-SW, NW-SE, and N-S trends83, 84, 85. It also aligns with multi-scale lineament analyses across Nigerian basement complexes11, 12, 24, 86, 87, 88, 89, 90, 91, 92, 93, 94. Furthermore, the dominant NE-SW trend correlates with the structural axis of the Benue Trough3, 95, 96 supporting a genetic link to Late Jurassic–Early Cretaceous rifting during Gondwana fragmentation97, 98. The spatial association of deep-seated magnetic low zones with long, interconnected structures (Fig. 15f) further agrees with previous interpretations of NE-SW-trending intrusive bodies bounded by Pan-African shear corridors92,45.Fig. 15CET structural maps of FVD, SVD, TAD, THD, ASIG, and TMI upward continued to 2000 m draped over (a) FVD, (b) SVD, (c) TAD, (d) THD, (e) ASIG, and (f) TMI upward continued to 2000 m grids, respectively. CET structural maps of FVD, SVD, TAD, THD, ASIG, and TMI upward continued to 2000 m draped over (a) FVD, (b) SVD, (c) TAD, (d) THD, (e) ASIG, and (f) TMI upward continued to 2000 m grids, respectively. However, a key point of divergence emerges in the relative importance of structural trends. While regional compilations list multiple dominant orientations, including NNE–SSW, NNW–SSE, N–S, and E–W12, 14, 15, 99 the high-resolution geophysical data analysis of the Oban Massif demonstrates an overwhelming predominance of the NE-SW trend. This suggests that within this specific district, the polyphase Pan-African tectonothermal evolution comprising deformation, metamorphism, and granite emplacement45, 68, 69, 70 has imprinted a particularly unified structural architecture. This architecture is the principal control on hydrothermal fluid pathways81, 82,14. The radiometric data Fig. 12a-b, 13a-b provide insights consistent with established geophysical-petrophysical relationships. High potassium (K) concentrations correlate with felsic lithologies, while Th-depleted zones mark structurally disturbed and altered domains11, 36, 71, agreeing with regional findings14. Elevated uranium (U) aligns with granitoid intrusions and associated hydrothermal systems64,67,66,14. Also, the spatial correlation between high magnetic intensity and elevated potassium (Fig. 16) suggests magnetite-series, potassically altered felsic intrusions. This directly agrees with global and regional models for intrusion-related gold mineralization (Geological Survey of Canada, 1992;11, 14, 23, 82, 100, 101. The K/Th ratio map (Fig. 17) effectively highlights alteration halos along NE-SW structural trends, suppressing lithological noise102, 103, 104. The anomalously high K/Th ratios (0.6–1.5 %/ppm), exceeding the regional background105, agree with associations to diverse mineral systems106 and provide discrete vectors to zones of gold-silver, polymetallic, and rare-metal potential.Fig. 16Correlation of high magnetic and potassium intensities involving (a) TMI, (b) TMI upward continued to 2000 m, (c) ternary and (d) K maps.Fig. 17K/Th ratio map of the study area. Correlation of high magnetic and potassium intensities involving (a) TMI, (b) TMI upward continued to 2000 m, (c) ternary and (d) K maps. K/Th ratio map of the study area. A significant disagreement with recent geophysical studies is evident in our depth-to-basement estimates. Regional studies of Nigerian basement terrains consistently report shallow sedimentary cover, typically less than ~750 m12, 14, 99, reflecting exposed or near-surface high-grade metamorphic and igneous rocks5, 6,15. In contrast, this study delineates sediment thicknesses reaching up to ~2580 m, particularly towards the Cretaceous Calabar Flank and Tertiary Niger Delta Basin. This discrepancy indicates that the Oban Massif is not a uniformly exposed block but includes deeply buried segments within a major tectono-sedimentary transition zone. This finding has profound implications for exploration, indicating substantial potential for concealed mineralization and necessitating methodologies capable of probing greater depths. Conclusion High-quality airborne magnetic and radiometric datasets were systematically processed to delineate geologic structures and lithologic units with the object of mapping the mineral-rich Oban Massif by integrating structural, lithological, and hydrothermal alteration indicators. The TMI data were enhanced using FVD, SVD, ASIG, TAD, and THD operations. These enhanced grids, alongside the TMI, were subjected to CET grid analysis, producing detailed structural maps that revealed a dominant NE–SW regional strike direction, a pattern consistent with the structural trend of the adjoining Benue Trough and indicative of polyphase deformation. Radiometric analysis, involving total count and ternary images, identified high concentrations of potassium, thorium, and uranium associated with lithologies such as shales, hornfels, gneiss, schist, granitoids, and hydrothermally altered zones. Critically, the spatial coincidence of high magnetic intensity and elevated potassium concentration delineates a prospective zone for igneous-related gold mineralization. Furthermore, K/Th ratio maps revealed anomalous values (0.6–1.5 %/ppm) exceeding the typical background range (0.16–1 %/ppm). These anomalies, aligned with NE-SW structural corridors, signal potential for gold-silver, polymetallic, molybdenum, tungsten, and rare earth element deposits. Depth to basement estimates SPI, SED, and 2-D forward modeling indicate sediment thicknesses reaching approximately 2580 m in areas proximal to the Cretaceous Calabar Flank and Tertiary Niger Delta Basin. This finding contrasts with shallower estimates from other Nigerian basement terrains, highlighting a significant burial depth that underscores the potential for concealed mineralization. Generally, the integrated interpretation successfully establishes a coherent relationship between geologic structures, lithological variations, and hydrothermal alteration zones. The delineated NE-SW structural features, particularly those coincident with magnetic highs and anomalous K/Th ratios, are inferred to be primary conduits and hosts for metallogenic mineralization.