Ameliorative role of apricot shell-derived biochar in modulating photosynthetic pigments, osmolytes, and secondary metabolites in chromium stressed Brassica juncea Authors: Nahida Rehman Mir, Manpreet Singh Mavi, Nitika Kapoor Published: 2026 ABSTRACT Chromium (Cr), a redox-active heavy metal, induces oxidative stress in plants by generating reactive oxygen species (ROS) such as hydrogen peroxide, superoxide anion, and hydroxyl radicals, which reduce plant productivity and yield. This study evaluated the potential of biochar (BC) derived from apricot kernel shells to alleviate Cr toxicity in Brassica juncea. The BC was characterized as amorphous, alkaline (pH 7.84), with a zeta potential of –22.3 mV, and elemental composition of C (60.70%), O (29.58%), H (2.65%), and N (0.77%). FTIR analysis revealed multiple oxygen-containing functional groups, suggesting its capacity to reduce Cr mobility. The alkaline nature and porous structure of the BC further support its immobilization potential. Seeds of B. juncea were germinated in soil treated with 0.5 mM and 0.75 mM Cr, with or without 1% BC (10 g/kg soil). Cr exposure significantly reduced photosynthetic pigments, with total chlorophyll declining by 30.8–49.1% and carotenoids by 25.7–50% compared to control, while pheophytin content increased by 13.9–45.3%. Application of BC improved chlorophyll content and reduced pheophytin accumulation. Secondary metabolites and osmolytes were enhanced under BC and stress treatments, with total phenols increased by up to 45% and total carbohydrates by up to 34%. Growth and germination parameters were also negatively affected by Cr, but BC treatment effectively mitigated these effects, improving root and shoot development. Overall, apricot kernel shell–derived BC alleviated Cr phytotoxicity by reducing metal availability and enhancing plant growth, photosynthetic performance, and metabolic activity. These findings highlight its potential as an eco-friendly and sustainable strategy for mitigating heavy metal stress in plantsSupplementary InformationThe online version contains supplementary material available at 10.1038/s41598-026-47473-y. Introduction In recent times, the decline in agricultural productivity due to diverse environmental stresses has posed a significant challenge for plant scientists, compelling them to develop effective strategies to minimize crop losses1. Plant growth and development are highly susceptible to abiotic stresses, which disrupt key morphological, biochemical, and physiological processes. From germination to maturity, such stresses including heavy metals, extreme temperatures, salinity, drought and waterlogging pose serious constraints on plant performance, ultimately reducing growth and yield1–3. Recently, Cr has emerged as a critical environmental contaminant, driven largely by unsustainable agricultural practices, uncontrolled industrial effluent discharge, and the extensive use of biosolids, posing serious ecological and agricultural threats4. Chromium exists in multiple forms in soil, with hexavalent (Cr(VI)) and trivalent (Cr(III)) species being the most stable and prevalent5. Owing to its higher water solubility, Cr becomes more bioavailable to plants6. Among its oxidation states, Cr(VI) is particularly hazardous, as it readily penetrates plant roots and induces oxidative damage to vital cellular structures7,8. Even at trace levels, Cr(VI) can disrupt nutrient and water uptake, leading to nutrient deficiencies in shoots9. Oxidative damage to root tissues further enhances passive entry of Cr(VI), allowing its translocation to shoots, where it impairs the mitochondrial and photosynthetic systems. Being a strong oxidant, Cr(VI) disrupts photophosphorylation, induces lipid peroxidation, and triggers excessive generation of ROS10. Due to its structural similarity to sulfate (SO₄2⁻), CrO₄2⁻ is readily transported into cells via sulfate transporters11, where it reacts with antioxidants such as ascorbate (ASA) and glutathione (GSH), generating harmful free radicals. The resulting ROS including singlet oxygen, superoxide, hydroxyl radicals (•OH), and hydrogen peroxide (H₂O₂)12 can damage DNA–protein complexes, leading to genotoxicity and cytotoxicity13. Such adverse effects of Cr(VI) exposure have been widely reported in plants like rice, bush bean, mung bean, mustard, spinach and tomato4,14,15. Hence, the challenge of Cr contamination, which hampers agricultural productivity worldwide, has drawn considerable scientific attention. Several conventional techniques, including ion exchange, membrane filtration, precipitation and coagulation have been employed for the removal of Cr from wastewater16. However, their large-scale application is often limited due to inconsistent results and the high operational costs associated with these processes16,17. Recently, there has been growing interest in using low-cost materials as adsorbents18. One such material is BC which is a carbon-rich pyrogenic material produced by the thermal decomposition of organic matter in an oxygen-limited environment19. It is primarily derived from feedstocks such as agricultural residues, animal waste, and woody biomass20,21. Also, by enhancing various key properties of soil, such as its water-holding capacity, organic matter content, cation exchange capacity, pH and microbial activity BC functions as an effective soil conditioner21,22. Owing to its abundant functional groups, minerals, π-electrons, porous structure and organic matter content, BC regulates Cr bioavailability and stability in soil through multiple mechanisms such as electrostatic interactions, cation exchange, precipitation and complexation23,24. Notably, oxygen-containing functional groups, including hydroxyl, carboxyl, and phenolic groups on the BC surface, can effectively bind with soil pollutants25. Furthermore, the large surface area, high porosity, and well-organized carbon framework of BC26 enable it to act as a potent sorbent for pollutants via complexation27. This is facilitated by the presence of acidic functional groups (carboxylic, carbonyl, lactone, hydroxyl, and phenol) and basic functional groups (ketone and chromene)28. Additionally, BC can promote the precipitation of Cr by interacting with soil minerals such as carbonates, oxides, and phosphates29,30. Prior studies have also highlighted the ability of BC active sites, such as carboxylic acid (−COOH), carbonyl (−C=O), and inorganic ions (e.g., PO₄3⁻), to bind toxic metals, thereby reducing their mobility in soil31,32. Collectively, these attributes underscore BC effectiveness as both an environmental adsorbent and a stabilizing agent for organic and inorganic soil contaminants17. Moreover, BC possesses the ability to reduce Cr(VI) to its less toxic trivalent form, Cr(III), further mitigating its environmental hazards33. In addition to these mechanisms, several studies have demonstrated the practical effectiveness of BC in contaminated soils. For example, bamboo BC application in mine-polluted soils improved soil physicochemical properties and reduced the bioavailability and uptake of toxic metals, thereby enhancing antioxidant defense and biomass accumulation in Brassica juncea34. Similarly, kenaf BC effectively mitigated HM stress and enhanced phytoremediation in Cannabis sativa. The BC exhibited strong chemisorption capacity in a multi-metal system, particularly for Cd2⁺ and Zn2⁺, which significantly reduced their bioavailability in soil35. The application of BC prepared from eucalyptus n bamboo (Sasa kongosanensis f. aureo-striatus) under copper stress enhanced the plant defense system by stimulating antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), peroxidase (POD), and phenylalanine ammonia-lyase (PAL), along with improving the efficiency of the glyoxalase detoxification pathway. It also promoted the accumulation of osmolytes, particularly proline and glycine betaine, which contributed to osmotic balance and protection against oxidative stress. Consequently, oxidative damage was alleviated. Furthermore, the treatments improved photosynthetic pigment content, gas-exchange attributes, and plant water status, while simultaneously reducing copper translocation and bioaccumulation in plant tissues36–38. Another, popular ameliorator among researchers is nanoparticles, they help plants in scavenging excessive ROS induced by heavy metal (HM) stress by increasing the activity of antioxidative enzymes and can reduce the accumulation and uptake of HMs36–39. Nanoparticles mainly act inside plants however BC immobilizes HM in soil, thereby reducing their bioavailability before plant uptake40–42. Biochar being aromatic in nature is highly stable and remain effective for hundreds or thousands of years but nanoparticles may transform, dissolve, or leach, reducing long-term effectiveness43,44. Considering the documented benefits of BC in regulating Cr bioavailability and stability in soil, as well as enhancing plant growth and development under Cr stress, we propose using apricot shell-derived BC to mitigate Cr toxicity in Brassica juncea L. seedlings which was assessed by evaluating various growth and biochemical parameters. Based on this, the present study was designed with the following objectives:To prepare and characterize BC from the apricot kernel shells.To investigate the effect of BC on the growth parameters of Cr-stressed Brassica juncea L.To investigate the effect of BC on the physiological parameters of Cr-stressed Brassica juncea L. To prepare and characterize BC from the apricot kernel shells. To prepare and characterize BC from the apricot kernel shells. To investigate the effect of BC on the growth parameters of Cr-stressed Brassica juncea L. To investigate the effect of BC on the growth parameters of Cr-stressed Brassica juncea L. To investigate the effect of BC on the physiological parameters of Cr-stressed Brassica juncea L. To investigate the effect of BC on the physiological parameters of Cr-stressed Brassica juncea L. Materials and methods Biochar preparation process The raw material used for the preparation of BC was apricot (Prunus armeniaca L.) kernel shells, procured from the Kargil district of UT Ladakh. The apricot shells were washed with distilled water and allowed to dry naturally. The dried shells were then pyrolyzed in a single-screw pyrolysis reactor at a temperature of 500-550°C for 3-4 minutes (residence time). The black residue (BC) obtained after pyrolysis was allowed to cool, finely ground, and subsequently passed through a 0.5 mm mesh before application (Figure 1).Fig. 1Preparation of biochar from the apricot kernel shells. Preparation of biochar from the apricot kernel shells. Characterization of biochar The percentage yield of BC after pyrolysis was calculated as the ratio of the produced BC mass to the initial biomass, (Yield (%) = Weight of BC / weight of biomass × 100)45 which was 40%. For proximate analysis, 1g BC was combusted for 2 hrs at 800°C ± 20°C, and the residual mass percentage was determined as the ash content. Fixed carbon content was estimated by calculating the difference between the BC total dry weight and the combined proportions of ash and volatile matter. The volatile matter content was measured by recording the mass loss of a 1.0 g BC sample after combustion in a muffle furnace at 850°C for 1 minute. The oven dried (80°C) and finely powdered BC samples were further analyzed using elemental analyzer (Thermo Scientific, Flash 2000) to estimate the percentage of C, H, N. The amount of oxygen in the sample was calculated by subtracting total percentage of carbon, nitrogen, hydrogen, sulphur and ash from 10046. Fourier-transform infrared (FTIR) spectroscopy analysis was conducted on the apricot kernel shell BC sample produced at 500°C. The spectra of FTIR were obtained using Shimadzu-FTIR and then the measurements were performed on the dry powdered samples. High-quality spectral lines, were recorded between 4000 and 400 cm⁻1 and to estimate the surface area, pore volume and diameter, Brunauer-Emmett-Teller (BET) surface analyzer was used. Furthermore, SEM-EDS was also conducted to characterize the surface morphology and elemental composition of the prepared BC. Experimental design The experiment was conducted under in-vitro conditions at 25 ± 2°C with a 16-hours photoperiod. A total of six treatments, each with three replicates were included: Control, M1, M2, BC, BC+M1 and BC+M2 (Table 1). HM stress was induced using potassium chromate (K₂CrO₄) as a source of hexavalent chromium [Cr(VI)]. The Cr concentrations used in this study were selected based on IC50 (0.5 mM) and IC75 (0.75 mM) values (supplementary material, Table S1; Figure S1), which were determined from preliminary toxicity experiments by evaluating the inhibition of root elongation in seedlings exposed to different Cr concentrations. Biochar was applied at a rate of 1% (10 g kg⁻1 soil), on the bases of preliminary trials against 0.5 mM Cr in which this concentration was found to be effective in alleviating Cr-induced toxicity, particularly in terms of root length reduction in Brassica juncea L. seedlings.Table 1Various treatments and their concentration used in the study.S.NO.TreatmentsBiocharCr VI1.Control002.M100.5mM3.M200.75mM4.BC1%05.BC+M11%0.5mM6.BC+M21%0.75mM Table 1Various treatments and their concentration used in the study.S.NO.TreatmentsBiocharCr VI1.Control002.M100.5mM3.M200.75mM4.BC1%05.BC+M11%0.5mM6.BC+M21%0.75mM Various treatments and their concentration used in the study. Brassica juncea L. seeds, obtained from Punjab Agricultural University, Ludhiana, Punjab, India, were surface-sterilized with 0.24% sodium hypochlorite prior to sowing. Seedlings were harvested after 10 days, thoroughly rinsed with distilled water, and processed for further analyses. Growth analysis At the end of each harvest, the seedlings were uprooted, cleansed with tap water to remove residual debris, and finally rinsed with distilled water. Subsequently, various parameters were analyzed. Fresh weight, Dry weight and moisture content The fresh weights (g) of the seedlings were determined using a digital balance in the laboratory, while the method proposed by Wolf et al.47 was followed to determine dry weight and moisture content of the seedling. The weight of an empty evaporating dish was recorded, after which fresh plant material was added and the combined weight was noted. The dish containing the sample was then oven-dried at 102–105 °C for 16 hours. Once dried, the dry weight of the seedlings was measured. The recorded fresh and dry weights were subsequently used to calculate the moisture content of the seedlings using the following formula: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text{Moisture Content }(\mathrm{\%})=\frac{\left(\text{weight of wet sample}+\mathrm{evap}.\text{ dish}\right)-(\text{weight of dry sample}+\mathrm{evap}.\text{ dish})}{\left(\text{weight of wet sample}+\mathrm{evap}.\text{ dish }\right)-(\text{weight of empty evap}.\text{ dish})} \times 100$$\end{document} Root length and shoot length At the time of harvest, shoot and root lengths (cm) were measured using a centimeter scale. Stress tolerance index Various stress tolerance indices were determined to assess plant performance under stress conditions. These included the shoot height stress tolerance index (SHSTI), root length stress tolerance index (RLSTI), and stress tolerance indices for total fresh weight (FWSTI) and dry weight (DWSTI), which were computed using the respective formulas provided by Abdelhameed and Metwally,48.\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{DWSTI}\left(\mathrm{\%}\right)=\frac{\text{Dry weight of treated plants}}{\text{Dry weight of untreated plants}}\times 100$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{FWSTI}\left(\mathrm{\%}\right)=\frac{\text{Fresh weight of treated plants}}{\text{Fresh weight of untreated plants}}\times 100$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{SHSTI}\left(\mathrm{\%}\right)=\frac{\text{Shoot height of treated plants}}{\text{Shoot height of untreated plants}}\times 100$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathrm{RLSTI}\left(\mathrm{\%}\right)=\frac{\text{Root length of treated plants}}{\text{Root length of untreated plants}}\times 100$$\end{document} Germination percentage The germination percentage was estimated using the Close & Wilson49 method.\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text{Germination percentage }=\frac{\text{Number of seeds germinated}}{\text{Total no}.\text{ of seeds sown }} \times 100$$\end{document} Seedling vigor index Seedling vigor index for seedling height was calculated using Bina and Bostani, 24 standard formula. The length of the seedlings in centimeters was multiplied by the germination % to calculate the Seedling vigor index Seedling vigor index = seedling length (cm) × seed germination percentage Germination mean time The formula proposed by Ellis and Roberts50 was used to calculate the germination mean time.\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text{Germination Mean Time }=\frac{\sum (\text{ni }\times \mathrm{ti})}{\sum \text{ni }}$$\end{document}Where,ni = no. of seeds germinated on day i.ti = time in days from the start of experiment to day i∑ni = Total no. of seeds germinated over the entire period Photosynthetic pigments content Chlorophyll content The methodology proposed by Lichtenthaler51 was followed for the estimation of chlorophyll content. Fresh plant tissue about 1g was homogenized in acetone (80%) using a chilled mortar and pestle to preserve pigment integrity. The resulting homogenate was then subjected to centrifugation at 4°C for 20 minutes at 13,000 rpm (or ≈ 11,336 × g). Following centrifugation, the clear supernatant was carefully collected and its absorbance was recorded at wavelengths of 647 nm and 663 nm using a UV-Vis spectrophotometer. Total carotenoid Methodology of Maclachlan and Zalik52 was followed to determine the Total carotenoid content. 1g of fresh plant material was finely ground with 80% acetone in a pre-chilled mortar and pestle to ensure effective pigment extraction. The homogenized mixture was then centrifuged at 13,000 × g for 20 minutes at 4°C. After centrifugation, the clear supernatant was collected, and its absorbance was measured at 480 nm and 510 nm using a UV-Visible spectrophotometer to analyze pigment content. Pheophytin content The methodology proposed by Lichtenthaler51 was followed for the estimation of pheophytin content. Briefly, fresh plant material (1 gram) was thoroughly ground in a chilled mortar and pestle using 80% acetone as the extraction solvent. The homogenate was centrifuged at 5,000 rpm (or ≈ 1,677 × g) for 15 minutes at 4°C. After centrifugation, the supernatant was carefully collected and 25% HCl was added to it. The absorbance of the final reaction mixture was then measured at 653 nm and 665 nm to assess pigment content. Secondary metabolites Phenol content The procedure outlined by Singleton and Rossi,53 was followed for the analysis of the total phenol content in the seedlings of Brassica juncea. Around 0.5 grams of the dry sample was pulverized using 60% ethanol and kept in a water bath (65°C) for 10-15 minutes. The homogenate was filtered using whatman no.1 filter paper and then the volume was raised to 100 ml by adding 60% ethanol followed by mixing 2ml of the mixture with Folin-Ciocalteu reagent and sodium carbonate. The resulting mixture was then incubated for 2 hours and the optical density was noted at 765 nm. Anthocyanin content To determine the anthocyanin content, 1 gram of the fresh seedlings were subjected to crushing in 3 ml of acidified methanol by following the methodology of Mancinelli,54. The homogenate was then centrifuged for 25 minutes at 12000 rpm (or ≈ 9,659 × g) followed by recording the absorbance at 530 nm and 657 nm. Flavonoid content By following the methodology of El Far and Taie,55 total flavonoid content was estimated. Briefly, 100 mg of sample was crushed with the help of mortar and pestle using 4 ml of absolute methanol, after which the homogenate was centrifuged (13000 rpm or ≈ 11,336 × g, 4°C, 20 minutes). The supernatant (1.5 ml) was mixed with equal volume of 2% AlCl3 (2 g in 100 ml methanol). The resulting solution was shaken vigorously and incubated for 10 minutes followed by measuring the absorbance at 367 nm. Osmolyte Total carbohydrate To estimate the content of total carbohydrate 0.1 gram of oven dried sample was immersed in 5 ml of 2.5N HCl for 3 hours in a boiling water bath by following the methodology of Hedge,56. The sample was then cooled, neutralized using Na2CO3 and volume was raised to 100 ml followed by centrifugation. To 1 ml of the sample 4 ml of the anthrone reagent was added and the solution was again heated for 8 minutes after which the samples were cooled and absorbance was recorded at 630 nm. Trehalose The methodology of Trevelyn and Harrison,57 was followed to analyze the content of trehalose in the seedlings of Brassica juncea. 500 mg of the dried sample was homogenized in 80% ethanol. The resulting homogenate was subjected to centrifugation for 10 minutes at 5000 rpm (or ≈ 1,677 × g), 4°C. To the supernatant (0.1 ml), 2 ml of trichloroacetic acid and 4 ml of anthrone was added after which absorbance was recorded at 620 nm. Proline The methodology of Bates et al.58 was used for the estimation of proline content spectrophotometrically at 520 nm. 500 mg of fresh seedlings were homogenized using 3% sulfosalicylic acid and then the homogenate was centrifuged (12 min and 13,000 rpm or ≈ 11,336 × g). To the supernatant an equal volume of ninhydrin and glacial acetic acid was added the reaction mixture was then heated at 95 ± 5 °C. After 1 hour the reaction was terminated by placing the test tubes in ice-bath followed by the incorporation of toluene. Statistical analysis The data were statistically analyzed using IBM SPSS statistics version 25 software. All experiments were performed in triplicate, and results are presented as mean ± standard deviation. One-way analysis of variance (ANOVA) was used to determine significant differences among treatments, followed by Tukey’s multiple comparison test for mean separation. Statistical significance was considered at p ≤ 0.05. Results Characterization of biochar Various physical and chemical properties of BC were analyzed using standard protocols. The BC prepared from apricot kernel shell at a pyrolysis temperature of 500–550 °C exhibited a pH of 7.84, EC of 0.223 dS/m, 0.563% N, H/C ratio of 0.442, and O/C ratio of 0.192. It also contained 6.3% ash and 9.27% volatile matter (Table 2). The observed physicochemical characteristics are strongly influenced by the applied pyrolysis temperature. At 500–550 °C, substantial thermal degradation of labile components such as hemicellulose and cellulose occurs, leading to increased carbonization, reduced volatile matter, and enrichment of mineral ash content. This explains the relatively low volatile matter and moderate ash content, along with the slightly alkaline pH due to the accumulation of basic mineral constituents.Table 2Physicochemical characteristics of biochar.S.NO.Physicochemical characteristicsUnitsBC1.pH (1:25)-7.842.EC (1:25)dS/m0.2233.Volatile matter%9.274.Ash Content%6.35.Total Carbon%60.7036.Hydrogen%2.6497.Oxygen%29.5828.Nitrogen%0.7669.H/C-0.44210.O/C-0.19211.Surface aream2/g1.38712.Pore volumecm3/g0.00413.Pore diameternm1.814.Zeta potentialmV-22.3 Table 2Physicochemical characteristics of biochar.S.NO.Physicochemical characteristicsUnitsBC1.pH (1:25)-7.842.EC (1:25)dS/m0.2233.Volatile matter%9.274.Ash Content%6.35.Total Carbon%60.7036.Hydrogen%2.6497.Oxygen%29.5828.Nitrogen%0.7669.H/C-0.44210.O/C-0.19211.Surface aream2/g1.38712.Pore volumecm3/g0.00413.Pore diameternm1.814.Zeta potentialmV-22.3 Physicochemical characteristics of biochar. The elemental composition, particularly the low H/C (0.442) and O/C (0.192) ratios, indicates an increased degree of aromaticity and structural stability, which is characteristic of BC produced at intermediate to high temperatures. These ratios suggest the formation of condensed aromatic carbon structures through dehydration and decarboxylation reactions during pyrolysis, enhancing the recalcitrance and persistence of BC in soil systems. Fourier-transform infrared spectroscopy (FTIR) analysis revealed that the BC displayed a variety of absorption bands at different wavelengths. The FTIR spectrum (Figure 2) showed characteristic peaks corresponding to key functional groups. The broad band at 3418 cm⁻1 corresponded to O–H stretching59, while peaks at 2923 and 2852 cm⁻1 were attributed to –CH₃ and –CH₂– groups of long-chain saturated alkanes59. A distinct absorption at 1733 cm⁻1 represented C=O stretching of carbonyl groups60. The bands at 1462 and 1377 cm⁻1 were linked to C=C vibrations of aromatic rings and C–H bending of alkyl groups, respectively61. Additionally, the peak at 1417 cm⁻1 indicated O–H bending vibrations of alcohols62, and the band at 978 cm⁻1 corresponded to C=C vibrations of alkenes62. These functional groups suggest that, despite pyrolysis at 500–550 °C, a fraction of oxygen-containing groups is retained, which can play a crucial role in metal adsorption through surface complexation and electrostatic interactions.Fig. 2FTIR and CHN spectra of biochar. FTIR and CHN spectra of biochar. Figure 3 represents the X-ray diffraction (XRD) pattern of apricot kernel shell-derived BC. The results show no sharp crystalline peaks; however, diffraction peaks at 2θ = 9.8° and 22.7° are attributed to the (002) planes of amorphous carbon, indicating a disordered structure63,64. A minor peak at 2θ = 43.0° corresponds to the (100) plane of graphitic carbon, suggesting the presence of a small fraction of graphitized domains. This partial structural ordering is consistent with pyrolysis in the 500–550 °C range, where complete graphitization does not occur but initial development of graphitic structures begins.Fig. 3XRD spectra of apricot shell-derived biochar. XRD spectra of apricot shell-derived biochar. Furthermore, the FESEM micrographs (Figure 4 and Table 3) show a heterogeneous and porous structure, which is a characteristic outcome of pyrolysis at this temperature range. The irregular surface morphology and well-developed pore networks are formed due to the release of volatile compounds during thermal decomposition. The formation of such pores enhances the surface heterogeneity and provides active sites for adsorption processes.Fig. 4FESEM-EDS images of apricot shell-derived biochar.Table 3Elemental composition of apricot shell-derived biochar from Energy -dispersive X-ray spectroscopy (EDS).BiocharCompositioncarbon (%)Oxygen (%)Potassium (%)Calcium (%)Zirconium (%)Iron (%)Silicon (%)75.9916.722.690.681.042.010.87 FESEM-EDS images of apricot shell-derived biochar. Table 3Elemental composition of apricot shell-derived biochar from Energy -dispersive X-ray spectroscopy (EDS).BiocharCompositioncarbon (%)Oxygen (%)Potassium (%)Calcium (%)Zirconium (%)Iron (%)Silicon (%)75.9916.722.690.681.042.010.87 Elemental composition of apricot shell-derived biochar from Energy -dispersive X-ray spectroscopy (EDS). Surface area analysis further indicated a pore volume of 0.004 cm3/g, a Brunauer–Emmett–Teller (BET) surface area of 1.387 m2/g, and an average pore diameter of 1.8 nm, suggesting the presence of predominantly microporous structures. Although higher pyrolysis temperatures generally increase surface area, the relatively low BET value observed here may be due to pore blockage or collapse caused by tar deposition during pyrolysis. Nevertheless, the developed porosity, as confirmed by FESEM, is sufficient to support adsorption and immobilization processes. The zeta potential of −22.3 mV indicates a negatively charged surface, which can be attributed to the presence of residual oxygen-containing functional groups. This negative surface charge enhances the electrostatic attraction of positively charged metal ions, thereby improving the adsorption capacity of BC. Overall, the pyrolysis temperature of 500–550 °C resulted in BC with a balanced combination of aromatic stability, residual functional groups, and porous structure. These characteristics are particularly advantageous for environmental applications, especially in the immobilization of heavy metals, as they provide both structural stability and reactive surface sites. Influence of biochar on growth attributes of Brassica juncea seedlings under cr stress Biochar application significantly improved all growth attributes of Cr-stressed Brassica juncea seedlings (p ≤ 0.05; Figure 5a, b). The most pronounced effect was observed in the BC alone treatment, which showed a significant increase in root length (24.75%), shoot length (35.91%), fresh weight (57.12%), and dry weight (133.3%) compared with the Control. In contrast, Cr only treatments (M1 and M2) exhibited a significant reduction in all growth parameters, with M2 showing significantly lower values than the Control, indicating severe phytotoxic effects. However, the combined application of BC with Cr significantly alleviated this toxicity, as BC+M1 and BC+M2 showed significantly higher growth compared to their respective Cr-only treatments. Notably, BC+M1 was statistically at par with the Control for several growth parameters, indicating effective mitigation under moderate stress, whereas BC+M2, although significantly improved over M2, remained lower than the Control. A similar trend was observed for moisture content, which decreased under Cr stress but significantly improved upon BC application. Furthermore, the stress tolerance indices, including SHSTI, RLSTI, FWSTI, and DWSTI, were significantly higher in BC-amended treatments compared to Cr-only treatments, confirming the protective role of BC in reducing Cr-induced phytotoxicity and improving overall plant performance. (Table 4). Fig. 5a: Effect of Biochar (BC) on (a) Shoot Length (b) Root length in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. b: Effect of Biochar (BC) on (a) Fresh Weight (b) Dry Weight (c) Moisture Content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different.Table 4Effect of various treatments on the dry weight stress tolerance index (DWSTI), fresh weight stress tolerance index (FWSTI), shoot height stress tolerance index (SHSTI), and root length stress tolerance index (RLSTI) of Brassica juncea seedlings. Values are presented as mean ± standard error of three replicates. Different letters indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; values sharing the same letter are not significantly different.TreatmentsDWSTI(%)FWSTI(%)SHSTI(%)RLSTI(%)Control----M161.11±5.56b81.40±5.66ab61.07±3.67b77.34±3.33cM230.56±2.78a67.07±5.08a26.26±2.49a18.13±3.76aBC----BC+M163.00±3.66b136.34±8.22cd91.53±4.01c101.84±5.45cdBC+M296.00±4c112.11±2.74bc33.82±2.03ab46.02±3.21b a: Effect of Biochar (BC) on (a) Shoot Length (b) Root length in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. b: Effect of Biochar (BC) on (a) Fresh Weight (b) Dry Weight (c) Moisture Content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Table 4Effect of various treatments on the dry weight stress tolerance index (DWSTI), fresh weight stress tolerance index (FWSTI), shoot height stress tolerance index (SHSTI), and root length stress tolerance index (RLSTI) of Brassica juncea seedlings. Values are presented as mean ± standard error of three replicates. Different letters indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; values sharing the same letter are not significantly different.TreatmentsDWSTI(%)FWSTI(%)SHSTI(%)RLSTI(%)Control----M161.11±5.56b81.40±5.66ab61.07±3.67b77.34±3.33cM230.56±2.78a67.07±5.08a26.26±2.49a18.13±3.76aBC----BC+M163.00±3.66b136.34±8.22cd91.53±4.01c101.84±5.45cdBC+M296.00±4c112.11±2.74bc33.82±2.03ab46.02±3.21b Effect of various treatments on the dry weight stress tolerance index (DWSTI), fresh weight stress tolerance index (FWSTI), shoot height stress tolerance index (SHSTI), and root length stress tolerance index (RLSTI) of Brassica juncea seedlings. Values are presented as mean ± standard error of three replicates. Different letters indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; values sharing the same letter are not significantly different. Chromium stress and BC application significantly influenced germination traits of Brassica juncea (p ≤ 0.05; Figure 6). Germination percentage was significantly reduced under Cr stress, with M2 showing significantly lower values than the Control and BC treatments. In contrast, BC alone recorded the highest germination percentage and was significantly higher than M1, M2, and BC+M2, while remaining statistically at par with the Control and BC+M1. The combined application of BC with Cr improved germination compared to Cr-only treatments, as BC+M1 and BC+M2 showed higher values than M1 and M2, respectively.Fig. 6Effect of Biochar (BC) on (a) Germination Percentage (b) Seedling Vigour Index (c) Germination Mean Time in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Effect of Biochar (BC) on (a) Germination Percentage (b) Seedling Vigour Index (c) Germination Mean Time in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. A similar trend was observed for the Seedling Vigour Index. M2 showed a significant decline compared to the Control, whereas BC alone exhibited a significantly higher vigour index than all other treatments. The BC+M1 treatment was statistically at par with the Control but significantly higher than M1, M2, and BC+M2, indicating effective amelioration under moderate stress. BC+M2 also showed improvement over M2 but remained significantly lower than the Control. In terms of Germination Mean Time, Cr stress significantly delayed germination, with M2 showing significantly higher values than all other treatments. However, BC application significantly reduced the germination time, as BC alone recorded the lowest value and was significantly lower than M1, M2, and BC+M2, while remaining statistically similar to the Control and BC+M1. Overall, biochar application improved germination performance and vigour while reducing the delay caused by Cr stress. Influence of biochar on photosynthetic pigment content of Brassica juncea seedlings under Cr stress The results (Figure 7) demonstrate that Cr stress and BC application significantly affected the photosynthetic pigment content of Brassica juncea seedlings (p ≤ 0.05). Chromium exposure, particularly at the higher concentration (M2), caused a significant reduction in all pigments, with chlorophyll a, chlorophyll b, total chlorophyll, and total carotenoids decreasing by 39.2%, 46.7%, 49.1%, and 50%, respectively, compared to the Control, indicating impaired photosynthetic efficiency. Both M1 and M2 recorded significantly lower pigment contents than the Control. In contrast, BC application alone significantly enhanced pigment levels, increasing chlorophyll a by 94.8%, chlorophyll b by 47.3%, total chlorophyll by 43.4%, and total carotenoids by 98.6% over the Control, and showed significantly higher values than all other treatments. Furthermore, the combined application of BC with Cr (BC+M1 and BC+M2) significantly alleviated Cr-induced pigment loss, as these treatments exhibited significantly higher pigment contents than their respective Cr-only treatments. Notably, BC+M1 showed pigment levels comparable to the Control, whereas BC+M2, although significantly improved compared to M2, remained lower than the Control, highlighting the protective role of BC in mitigating Cr-induced damage to the photosynthetic apparatus.Fig. 7Effect of Biochar (BC) on (a) Chlorophyll a (b) Chlorophyll b (c) Total Chlorophyll (d) Total Carotenoid content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Effect of Biochar (BC) on (a) Chlorophyll a (b) Chlorophyll b (c) Total Chlorophyll (d) Total Carotenoid content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. The effect of Cr and BC treatments on pheophytin a, pheophytin b, and total pheophytin content in Brassica juncea seedlings is presented in Figure 8. Chromium stress significantly increased pheophytin accumulation (p ≤ 0.05), with M2 recording the highest values, showing increases of 39.03%, 82.7%, and 45.3% in pheophytin a, pheophytin b, and total pheophytin, respectively, compared to the Control. M2 was significantly higher than all BC-amended treatments, while M1 was also significantly higher than BC, BC+M1, and BC+M2 but remained statistically similar to the Control for some parameters. In contrast, BC application alone showed the lowest pheophytin content and was significantly lower than the Control, M1, and M2. Furthermore, the combined application of BC with Cr (BC+M1 and BC+M2) significantly reduced pheophytin levels compared to their respective Cr-only treatments. BC+M1 showed values comparable to BC, whereas BC+M2 exhibited intermediate levels, being significantly lower than M2 but higher than BC. These findings indicate that Cr stress enhanced chlorophyll degradation, while BC application significantly minimized pheophytin accumulation, demonstrating its protective role against Cr-induced damage.Fig. 8Effect of Biochar (BC) on (a) Pheophytin a (b) Pheophytin b (c) Total Pheophytin Content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Effect of Biochar (BC) on (a) Pheophytin a (b) Pheophytin b (c) Total Pheophytin Content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Influence of biochar on secondary metabolites content of Brassica juncea seedlings under Cr stress Figure 9 shows that both Cr stress and BC application significantly affected the accumulation of secondary metabolites in Brassica juncea seedlings (p ≤ 0.05). Chromium toxicity significantly increased total phenol (F = 15.119; dfbetween = 5; dfwithin = 12), flavonoid (F = 58.518; dfbetween = 5; dfwithin = 12), and anthocyanin content (F = 29.009; dfbetween = 5; dfwithin = 12) compared to the Control. For total phenol content, seedlings treated with M2 exhibited significantly higher levels than the Control (p < 0.05). A similar increasing trend was observed under the BC+M1 treatment, where total phenol levels were significantly higher than both the Control and M1 treatments (p < 0.05), but remained comparable to M2 (p > 0.05). Likewise, BC-treated seedlings showed significantly higher total phenol content than the Control (p < 0.05), with no significant difference compared to M2 (p > 0.05).Fig. 9Effect of Biochar (BC) on (a) Total Phenol (b) Flavonoid and (c) Anthocyanin content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Effect of Biochar (BC) on (a) Total Phenol (b) Flavonoid and (c) Anthocyanin content in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. In terms of flavonoid content, a significant increase was observed in seedlings treated with M1 compared to the Control (p < 0.05), followed by a further significant rise under M2 treatment (p < 0.05). BC application also resulted in significantly higher flavonoid levels than the Control (p < 0.05), although values were comparable to M2 (p > 0.05). The combined BC+M1 treatment led to a significant enhancement over BC alone (p < 0.05), while the highest flavonoid content was recorded in BC+M2-treated seedlings, which was significantly greater than all other treatments (p < 0.05). For anthocyanin content, BC-treated seedlings exhibited the highest levels, being significantly greater than the Control as well as all other treatments (M1, M2, BC+M1, and BC+M2) (p < 0.05). Seedlings under M2 showed a significant increase over the Control (p < 0.05), but remained statistically similar to M1 (p > 0.05). The BC+M1 treatment did not result in any significant change compared to the Control (p > 0.05), whereas BC+M2 treatment significantly increased anthocyanin levels relative to M1 (p < 0.05), though values were still lower than those observed with BC alone (p < 0.05). Influence of biochar on osmolytes content of Brassica juncea seedlings under Cr stress The result shown in Figure 10 presents the effect of different treatments on the content of osmolytes such as total carbohydrates, trehalose and proline in Brassica juncea seedlings. Total carbohydrate content was significantly highest under BC alone (p < 0.05), followed by BC+M1, while the Control recorded the lowest value. BC+M1 was significantly higher than M2 and M1 (p < 0.05), whereas BC+M2 did not differ significantly from M2 (p > 0.05). For trehalose, M2 and BC exhibited the highest contents and were not significantly different from each other (p > 0.05). Both were significantly higher than M1, BC+M1, BC+M2, and the Control (p < 0.05). BC+M1 and BC+M2 showed intermediate values and were significantly higher than the Control (p < 0.05), but lower than BC and M2 (p < 0.05). In the case of proline, BC and BC+M2 recorded the maximum accumulation and were statistically at par (p > 0.05). Both were significantly higher than the Control, M1, M2, and BC+M1 (p < 0.05). The Control consistently showed the lowest osmolyte levels across all parameters.Fig. 10Effect of Biochar (BC) on (a) Total Carbohydrates (b) Proline content and (c) Trehalose in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Effect of Biochar (BC) on (a) Total Carbohydrates (b) Proline content and (c) Trehalose in 10 days old Brassica juncea seedlings under chromium (M1 and M2) stress. Bars represent mean ± standard error of three replicates. Different letters above the bars indicate statistically significant differences among treatments according to Tukey’s HSD test at p < 0.05; bars sharing the same letter are not significantly different. Correlation analysis The correlation analysis (Figure 11) revealed strong and significant relationships among growth and biochemical parameters. Growth attributes such as root length, shoot length, fresh weight, dry weight, and moisture content exhibited strong positive correlations (r ≈ 0.62–0.99), indicating coordinated plant development and suggesting that improvement in one parameter is closely associated with overall biomass accumulation. Similarly germination percentage, seed vigor index, and stress tolerance indices, were highly positively correlated, confirming their reliability as indicators of early plant establishment under stress conditions.Fig. 11The impact of biochar application was assessed through correlation analysis among various growth and biochemical attributes in 10 days old Cr-stressed Brassica juncea L. seedlings. In the correlation matrix, green shades indicate strong positive correlations, yellow indicates weak or no correlation, and red shades represent strong negative correlations between the measured parameters. The impact of biochar application was assessed through correlation analysis among various growth and biochemical attributes in 10 days old Cr-stressed Brassica juncea L. seedlings. In the correlation matrix, green shades indicate strong positive correlations, yellow indicates weak or no correlation, and red shades represent strong negative correlations between the measured parameters. In contrast, mean germination time showed strong negative correlations with most growth and germination traits (r ≈ –0.72 to –0.96), indicating that delayed germination adversely affects plant performance. Photosynthetic pigments, including chlorophyll a, chlorophyll b, total chlorophyll, and carotenoids, were strongly positively correlated with each other, reflecting the coordinated functioning of the photosynthetic system. Stress-related pigments, particularly pheophytin (pheophytin a, pheophytin b, and total pheophytin), exhibited strong negative correlations with growth and chlorophyll content, indicating that increased chlorophyll degradation is associated with reduced plant health under stress conditions. The resulting accumulation of pheophytins under HM stress often coincides with heightened oxidative stress in plants thus can serve as an early indicator of Cr toxicity. Additionally, biochemical parameters such as phenols, flavonoids, anthocyanins, total carbohydrates, trehalose, and proline showed positive correlations among themselves, suggesting their coordinated accumulation under stress. However, their moderate negative association with growth traits indicates a shift in plant metabolism toward stress response rather than growth. Discussion The aim of study was to investigate the metal-sequestering potential of apricot kernel shell-derived BC and to elucidate the mechanisms by which it mitigates Cr-induced phytotoxicity, with a particular focus on plant growth parameters, photosynthetic pigment content, secondary metabolites and osmolytes. Biochar properties and Cr immobilization mechanisms In the present study, the apricot kernel shell–derived BC exhibited a pH of 7.84, reflecting its alkaline nature, which is a characteristic feature of BC produced from such lignocellulosic biomass. The shift toward a near-neutral to alkaline pH is characteristic of pyrolysis in the 500–550°C range; this occurs as alkali salts begin to separate from the organic matrix above 300°C, leading to a concentrated accumulation of alkali earth metals within the resulting carbon structure26,65. This alkalinity is instrumental in neutralizing acidic soils and markedly affects the mobility and availability of HMs. As soil pH rises, HMs bind more strongly to soil particles, leading to reduced mobility and lower uptake by plants.66–69. Moreover, elevated soil pH can promote the formation of metal hydroxide precipitates, further decrease their bioavailability and contribute to HM immobilization70. FTIR spectra (Figure 2) confirmed the presence of several surface functional groups, including C–C, C–H, C–O, and –C=O, indicating the enriched organic carbon structure of BC and highlighting its potential as an effective soil rejuvenator71,72. These surface functionalities enhance the adsorption of heavy metals by facilitating hydrogen bonding and other surface interactions with metal ions73,74. Abbas et al. (2018) reported that groups such as C–C, C–O, and –COOH contribute significantly to HM immobilization through ion-exchange processes. Moreover, heteroatoms such as oxygen and hydrogen present in –OH and –COOH groups can act as coordination sites that promote complex formation with HM ions, thereby stabilizing them on the BC surface75,76. In addition to adsorption mechanisms, redox reactions also play an important role in Cr immobilization. Electron-shuttle experiments conducted by Xu et al.77 demonstrated that –C–O and –C=O groups present on the BC surface function as electron-donating sites that facilitate the reduction of Cr(VI) to the less toxic Cr(III) form. These groups, commonly present as phenolic, ketonic, and amino structures, can donate electrons during oxidation reactions, leading to their transformation into quinone groups and ammonium salts. This electron-transfer process promotes the conversion of Cr(VI) to Cr(III), thereby decreasing its toxicity, mobility, and bioavailability The zeta potential of the BC was recorded as –22.3 mV, indicating a negatively charged surface. This negative zeta potential is attributed to the presence of oxygen-containing functional groups, such as carboxylate (–COO⁻) and hydroxyl (–OH), on the BC surface, which impart electronegativity78. These oxygen-containing functional groups can donate electrons and facilitate the reduction of Cr(VI) to Cr(III)79. During this redox process, C–O and C=O groups were oxidized into carboxylic (–COOH) groups, indicating electron transfer from BC to Cr77. The generated Cr3⁺ is subsequently immobilized through ion exchange or surface complexation mechanisms, as proposed by Lyubchik et al.80, where Cr3⁺ may exchange with inherent cations such as K⁺ present on the BC surface, resulting in its stabilization and immobilization. The FESEM analysis showed that the BC possessed a highly porous surface, which helps in the physical adsorption of heavy metals32,36–38. Furthermore, the porous architecture of BC provides abundant active sites that serve as a microhabitat for microbial colonization, enhancing microbial survival and activity under stress conditions. This microbial–biochar system improves soil properties by increasing organic carbon content and cation exchange capacity, while reducing redox potential and bulk density. Consequently, microbial activity, together with interactions with the BC matrix, significantly contributes to heavy metal immobilization, resulting in reduction of Cr(VI) to Cr(III) and a substantial increase in the stable residual fraction of Cr81,82. The XRD spectra of apricot shell-derived BC synthesized at 500°C exhibited a predominantly amorphous nature. At this moderate carbonization temperature, the BC matrix preserves a high density of oxygen-containing functional groups, which serve as essential active sites for HM interaction. However, as the pyrolysis temperature increases, the BC undergoes a structural transition toward graphitic crystallinity, evidenced by the narrowing of XRD peaks. This structural ordering is accompanied by a significant reduction in oxygen-containing functional groups abundance due to thermal deoxygenation and decarboxylation, ultimately diminishing the BC’s capacity for the adsorption-coupled reduction of Cr(VI)83–85. The apricot shell derived BC exhibited a BET surface area of 1.387 m2/g. Although high BET surface area is often considered advantageous for HM adsorption, but several studies for instance, Dong et al.86; Daffalla,87; Hossain et al.88, demonstrate that BC with relatively low surface area can still effectively mitigate Cr phytotoxicity. This is because metal immobilization is governed not only by physical adsorption but also by surface functional groups, mineral constituents, alkalinity, and redox reactions that convert toxic Cr(VI) into less mobile Cr(III). Impact on plant growth and germination Cr contamination in soil has been shown to negatively impact plant physiological processes, particularly germination and growth in Brassica juncea plants89. In the current study. Cr exposure significantly reduced germination percentage, seedling vigour, and prolonged the time required for seed germination, consistent with previous reports90,91. Similarly, notable reductions in both root and shoot lengths were observed under Cr stress, in agreement with findings in other plant species such as Triticum aestivum and Solanum lycopersicum, which also exhibited growth inhibition4,92.The decline in root development may be attributed to disrupted cell division and alterations in cell cycle regulatory genes, often resulting in chromosomal abnormalities93,94. Such impaired root systems limit water and nutrient uptake, subsequently affecting shoot elongation95–97. Furthermore, the study observed a significant decrease of fresh and dry matter in Brassica juncea seedlings exposed to Cr, reflecting the physiological stress imposed by Cr toxicity98,99. However, the application of BC has increased germination percentage100,) and reduced germination mean time101,102 by improving soil physicochemical properties. Its porous structure enhances soil water-holding capacity and moisture availability, which promotes rapid seed imbibition and accelerates germination103–106. In addition, BC supplies slow-release mineral nutrients and improves soil fertility, thereby supporting early metabolic activities required for germination107. These improvements create a favorable environment for seedling emergence and plant growth while simultaneously reducing the bioavailability of toxic metals in soil34,46. Modulation of photosynthetic apparatus For the early detection of HM toxicity in plants, organic compounds such as chlorophylls serve as reliable bio-indicators. Since chlorophyll plays a key role in photosynthesis, assessing its content provides valuable insights into the physiological effects of metal stress. In the present study, increasing concentrations of Cr significantly declined the content of chlorophyll a and b, total chlorophyll and total carotenoid. This trend reflects the disruptive effect of HMs on key metabolic processes, particularly through the inactivation of enzymes essential for normal cellular functions. Given that chlorophylls are integral to the pigment system within chloroplasts, their reduction directly impairs plant growth108. The observed decline in chlorophyll content may be attributed to the inhibition of key enzymes involved in the synthesis of chlorophyll, such as protochlorophyllide reductase and aminolevulinic acid dehydratase109. Similar reductions in photosynthetic pigment levels under Cr stress have also been documented in Helianthus annuus L.110, Vicia faba L.111 and Raphanus sativus112, supporting the findings of the current study. However, the application of BC, both individually and in combination with Cr, alleviated the stress caused by the metal, as evidenced by the enhanced levels of all photosynthetic pigments analyzed in the present study. Our findings align with those of Younis et al.112, who observed that applying 0.75% BC increased chlorophyll a by 12.66%, chlorophyll b by 40.67%, total chlorophyll by 20.84%, and carotenoid content by 48.19% in Cr-stressed Raphanus sativus. Similarly, 5% cotton stalk and 3% sugarcane bagasse-derived BC enhanced the photosynthetic pigment content in Spinacia oleracea L. and Zea mays L. respectively under Cr stress113,98. Induction of secondary metabolism and osmoprotection Phenolic compounds exhibit strong redox activity and function as effective antioxidants under stress conditions by scavenging ROS and stabilizing cellular redox homeostasis114. Their biosynthesis is primarily regulated through the phenylpropanoid pathway, where phenylalanine acts as a central precursor for a wide range of secondary metabolites, including flavonoids, anthocyanins, lignins, phytoalexins, and phenolic acids. Under HM stress, the activation of this pathway represents a crucial adaptive response, as plants enhance the synthesis of these compounds to counteract oxidative damage and metal toxicity115,116. This upregulation is largely mediated by increased activity of key enzymes such as phenylalanine ammonia-lyase (PAL), shikimate dehydrogenase, and polyphenol oxidase, which collectively drive the accumulation of phenolic metabolites117,118. These metabolites not only function as antioxidants but also participate in metal chelation, cell wall strengthening (via lignification), and restriction of metal translocation, thereby contributing to Cr immobilization within plant tissues. In addition to phenolics, the accumulation of soluble sugars and osmolytes represents another critical defense strategy under stress conditions. Sugars such as sucrose, trehalose, hexoses, and raffinose family oligosaccharides act as osmoprotectants, signaling molecules, and metabolic regulators, helping to maintain cellular integrity and osmotic balance. These compounds play a vital role in stabilizing membranes and proteins, preserving photosynthetic machinery, and mitigating oxidative damage by directly or indirectly scavenging ROS119. Furthermore, soluble carbohydrates serve as essential sources of energy and carbon skeletons required for sustaining metabolic processes and synthesizing stress-responsive biomolecules. Their accumulation is closely associated with improved membrane stability and maintenance of turgor pressure, which are essential for plant survival under Cr-induced stress36–38,120. The findings of the present study are consistent with previous reports demonstrating enhanced accumulation of secondary metabolites and osmolytes under HM stress and BC application, such as in bamboo36–38, tomato121,122, medicinal herbs123, cowpea124, peanut125, and lettuce126. Collectively, these results suggest that the accumulation of phenolic compounds and soluble sugars is not merely a stress symptom but a coordinated adaptive mechanism that enhances plant tolerance by integrating antioxidant defense, osmotic regulation, and metabolic stability under HM stress conditions. Future research directions Research on the ability of BC to reduce HM toxicity in plants is an area of increasing research interest. The results of the present study demonstrate the effectiveness of BC in alleviating Cr phytotoxicity through improvements in growth and biochemical parameters. In the present study, Cr stress reduced chlorophyll content, whereas the application of BC, either alone or in combination with Cr, enhanced pigment levels compared with the stress treatment. Future studies should investigate the effects of these treatments on δ-aminolevulinic acid and glutamate-1-semialdehyde, which are key intermediates in the tetrapyrrole biosynthesis pathway. Similarly, the activity of phenylalanine ammonia-lyase, a key regulatory enzyme of the phenylpropanoid pathway responsible for the synthesis of various secondary metabolites involved in plant defense, stress tolerance, and structural support, should also be examined. Future endeavors should also analyze the expression patterns of key HM responsive genes involved in photosynthesis, energy metabolism, and secondary metabolite biosynthesis. Detailed transcriptional studies targeting photosynthetic genes such as PetH (photosystem I) and LHCB7 (photosystem II), as well as the chloroplast ATP synthase gene atpD, would provide deeper insight into the physiological adjustments induced by BC under heavy metal exposure. Furthermore, gene expression analysis of metabolic pathways associated with plant defence and detoxification particularly phenylpropanoid metabolism (HCT, COMT) and flavonoid biosynthesis (FG3, GT1, CHS, FLS) should be undertaken. To better understand the mechanisms governing BC–Cr interactions, detailed kinetic investigations are required to elucidate the rate, pathways, and controlling mechanisms of Cr immobilization by BC. Furthermore, the assessment of soil enzyme activities, particularly dehydrogenase, urease, and phosphatases, should be prioritized to clarify the relationship between microbial functional recovery, soil fertility, and plant performance. Additionally, integrating the above measured biochemical indicators with multi-omics approaches, including metagenomics, metatranscriptomics, and metabolomics, would provide a holistic framework to decode biochar–microbe–plant interactions and support the development of effective and sustainable remediation strategies for Cr-contaminated soils. Conclusion HM toxicity is a growing concern that adversely affects the growth and development of plants. In the present study, apricot kernel shell BC, procured from the Kargil district of UT Ladakh, was used to ameliorate Cr toxicity in Brassica juncea seedlings. Characterization of this BC revealed that its alkaline nature, negative zeta potential, and abundance of functional groups impart it with the potential to reduce Cr phytotoxicity. This was further confirmed by the positive responses observed in various growth and biochemical parameters under treatments with Cr, BC, and their combination (Figure 12), where compared to control, the application of 1% BC had increased root length by 24.75%, shoot length (35.91%), fresh weight (57.12%) and dry weight (133.3%). Similar kind of positive effect was also observed in the photosynthetic pigments (Chlorophyll a, Chlorophyll b, Total Chlorophyll and Total Carotenoids). Furthermore, content of secondary metabolites and osmolytes were also estimated, their results again demonstrated the effectiveness of BC in alleviating Cr phytotoxicity. Overall, BC application improved all measured parameters, indicating that apricot kernel shell-derived BC can serve as a promising eco-friendly amendment for the amelioration of Cr stress in plants.Fig. 12Schematic illustration depicting the effects of Cr stress and biochar application on growth, germination, and biochemical attributes of Brassica juncea L. seedlings. Schematic illustration depicting the effects of Cr stress and biochar application on growth, germination, and biochemical attributes of Brassica juncea L. seedlings. Supplementary Information Supplementary Information. Supplementary Information.