Protocol to interrogate the role of creeping fat and mechanical tension in Crohn’s disease using a surgical mouse model of intestinal fibrosis Authors: Elijah J. Suh, Benjamin Pham, Khristian E. Bauer-Rowe, Alexia Kim, Norah E. Liang, Joseph Y. Park, Deshka S. Foster, Jeffrey A. Norton, Daniel Delitto, Michael T. Longaker, Jeong S. Hyun Published: 2026 ABSTRACT SummaryHere, we present a protocol to interrogate the role of creeping fat (CF) and mechanical tension in Crohn’s disease (CD) using a surgical mouse model of intestinal fibrosis. We describe steps for preoperative preparation, microsurgical techniques for stricture formation and mechanical stretching, and model variations such as mesenteric grafts. We then detail procedures for postoperative harvest, tissue embedding, and sectioning procedures. This model induces localized CF formation and transmural fibrosis, features distinct from those observed in chemical colitis models.For complete details on the use and execution of this protocol, please refer to Bauer-Rowe et al.1 Before you begin This protocol describes the creation of a surgical model of intestinal fibrosis in mice designed to interrogate the role of creeping fat (CF) and mechanical tension in Crohn’s disease (CD). By creating a longitudinal colotomy closed under tension, this model induces localized CF formation and transmural fibrosis, features distinct from those observed in chemical colitis models. We detail the preoperative preparation, the specific microsurgical techniques for stricture formation and mechanical stretching, model variations, post-operative harvest, and tissue embedding and sectioning procedures. We describe the surgery in 8–12-weeks-old C57BL/6 mice. Innovation A major barrier to studying intestinal strictures is the inability of current mouse models to replicate this unique phenotype. Existing CD animal models typically use caustic agents to induce inflammation,2,3 which require long treatment regimens and likely replicate an acute injury rather than the transmural, mechanically-driven strictures seen in advanced CD. One model generated CF using repeated endoscopic punch biopsies but required specialized equipment.4 We developed a novel and accessible surgical model that relies on transmural injury and mechanical tension to induce a stricture-like phenotype. This model’s innovation lies in its incorporation of mechanical tension by stretching the bowel during the colotomy closure, mimicking high mechanical tension in fibrotic tissue, to consistently produce CF and intestinal fibrosis. Thus, the model facilitates the study of late-stage, mechanically-driven fibrosis. Institutional permissions All research and animal care procedures were in accordance with the policies of the NIH for the guide, care for, and use of laboratory animals and protocols and were approved by the Stanford University Animal Care and Use Committee standards of care and with approval from Stanford University’s IACUC/APLAC (APLAC-34186). Researchers should obtain IACUC or equivalent approval at their institutions. Preparation of mesenteric graft surgery Timing: 3 days Timing: 3 days This step is only necessary for the mesenteric graft transplant surgery, not the standard colotomy model.1.Prepare tamoxifen at 20 mg/mL in corn oil after warming to 20°C.2.Administer tamoxifen (50 mg/kg) via intraperitoneal injection once daily for three consecutive days, ending at least 24 hours prior to colotomy surgery. 1.Prepare tamoxifen at 20 mg/mL in corn oil after warming to 20°C. Prepare tamoxifen at 20 mg/mL in corn oil after warming to 20°C. 2.Administer tamoxifen (50 mg/kg) via intraperitoneal injection once daily for three consecutive days, ending at least 24 hours prior to colotomy surgery. Administer tamoxifen (50 mg/kg) via intraperitoneal injection once daily for three consecutive days, ending at least 24 hours prior to colotomy surgery. Preparation of the surgical setup Timing: 15 min 3.Pre-warm the heating pad to 37°C.4.Prepare anesthesia induction chamber and nose cone with an isoflurane flow rate of 1.0L/min, setting the isoflurane vaporizer to 3.0% for 5 min or until the mouse is fully anesthetized.5.Autoclave all surgical instruments, including heavy hemostats, needle forceps, scissors, and the microdrill bit (Dremel) prior to anesthetizing the animal.a.Ensure suture materials (8-0 and 6-0 nylon) are sterile.b.Establish the sterile field by placing a sterile drape over a heating pad and positioning all the autoclaved surgical instruments in the sterile space. Note: Sterile field becomes the area encompassed by the sterile drape. 6.Position surgical microscope in necessary field of view. Note: Surgery can be done using any standard dissection scope. Timing: 15 min 3.Pre-warm the heating pad to 37°C. Pre-warm the heating pad to 37°C. 4.Prepare anesthesia induction chamber and nose cone with an isoflurane flow rate of 1.0L/min, setting the isoflurane vaporizer to 3.0% for 5 min or until the mouse is fully anesthetized. Prepare anesthesia induction chamber and nose cone with an isoflurane flow rate of 1.0L/min, setting the isoflurane vaporizer to 3.0% for 5 min or until the mouse is fully anesthetized. 5.Autoclave all surgical instruments, including heavy hemostats, needle forceps, scissors, and the microdrill bit (Dremel) prior to anesthetizing the animal.a.Ensure suture materials (8-0 and 6-0 nylon) are sterile.b.Establish the sterile field by placing a sterile drape over a heating pad and positioning all the autoclaved surgical instruments in the sterile space. Autoclave all surgical instruments, including heavy hemostats, needle forceps, scissors, and the microdrill bit (Dremel) prior to anesthetizing the animal.a.Ensure suture materials (8-0 and 6-0 nylon) are sterile.b.Establish the sterile field by placing a sterile drape over a heating pad and positioning all the autoclaved surgical instruments in the sterile space. a.Ensure suture materials (8-0 and 6-0 nylon) are sterile. Ensure suture materials (8-0 and 6-0 nylon) are sterile. b.Establish the sterile field by placing a sterile drape over a heating pad and positioning all the autoclaved surgical instruments in the sterile space. Establish the sterile field by placing a sterile drape over a heating pad and positioning all the autoclaved surgical instruments in the sterile space. Note: Sterile field becomes the area encompassed by the sterile drape. 6.Position surgical microscope in necessary field of view. Position surgical microscope in necessary field of view. Note: Surgery can be done using any standard dissection scope. Key resources table REAGENT or RESOURCESOURCEIDENTIFIERChemicals, peptides, and recombinant proteinsOphthalmic ointmentBausch&LombCat# 24208-780-55EthanolGoldShieldCat# 64175Phosphate Buffered SalineFisher ScientificCat# BP39920Vetbond3MCat# 1469SBTamoxifenFisher ScientificCat# 50-148-9352Tissue-Tek OCT CompoundVWRCat# 25608-930ParaformaldehydeEMSCat# 15710Buprenorphine Base 0.5 mg/mLWedgewoodNDC 79926-057-17Fluriso (isoflurane, USP)VetOneNDC 13985-528-60SucroseSigmaCat# S0389CarprofenDechraNDC 17033-348-20Povidone iodineDynarexCat# BD28594Corn oilSigma AldrichCat# C8267Experimental models: Organisms/strainsC57BL/6, 8-12 weeks, male and femaleThe Jackson LaboratoryStock No. 000664Col1a2Cre-ERT;TAZfl/fl;YAPfl/fl;Ai6, 8-12 weeks, male and femaleBauer-Rowe et al.1N/ACol1a2Cre-ERT;TAZfl/+;YAPfl/+;Ai6, 8-12 weeks, male and femaleBauer-Rowe et al.1N/AOtherSilicone Carbide Grinding stone (4.8mm)DremelSKU# 23773498-0 Micro Taper Point SutureAD SurgicalCat# XXS-N807T66-0 SutureEthilonCat# 1956GSurgical skin markerTondausCat# TD01Nair (Hair Removal Lotion)Church & DwightCat# 022600223399Mosquito HemostatFine Science ToolsCat# 13009-12Round Handled Micro Needle HolderFine Science ToolsCat# 12075-12Bonn ScissorsFine Science ToolsCat# 14084-08Iris ScissorsFine Science ToolsCat# 14060-10Suture Grip TipsWexler SurgicalCat# DL0200-YAcu-Tip Cauterizing InstrumentPracticonCat# 70-51711Surgical MicroscopeLeica MicrosystemsCat# OHS1Cotton-Tipped ApplicatorsFisher ScientificCat# 23-400-124Towel DrapesDynarexCat# DYN4410 REAGENT or RESOURCESOURCEIDENTIFIERChemicals, peptides, and recombinant proteinsOphthalmic ointmentBausch&LombCat# 24208-780-55EthanolGoldShieldCat# 64175Phosphate Buffered SalineFisher ScientificCat# BP39920Vetbond3MCat# 1469SBTamoxifenFisher ScientificCat# 50-148-9352Tissue-Tek OCT CompoundVWRCat# 25608-930ParaformaldehydeEMSCat# 15710Buprenorphine Base 0.5 mg/mLWedgewoodNDC 79926-057-17Fluriso (isoflurane, USP)VetOneNDC 13985-528-60SucroseSigmaCat# S0389CarprofenDechraNDC 17033-348-20Povidone iodineDynarexCat# BD28594Corn oilSigma AldrichCat# C8267Experimental models: Organisms/strainsC57BL/6, 8-12 weeks, male and femaleThe Jackson LaboratoryStock No. 000664Col1a2Cre-ERT;TAZfl/fl;YAPfl/fl;Ai6, 8-12 weeks, male and femaleBauer-Rowe et al.1N/ACol1a2Cre-ERT;TAZfl/+;YAPfl/+;Ai6, 8-12 weeks, male and femaleBauer-Rowe et al.1N/AOtherSilicone Carbide Grinding stone (4.8mm)DremelSKU# 23773498-0 Micro Taper Point SutureAD SurgicalCat# XXS-N807T66-0 SutureEthilonCat# 1956GSurgical skin markerTondausCat# TD01Nair (Hair Removal Lotion)Church & DwightCat# 022600223399Mosquito HemostatFine Science ToolsCat# 13009-12Round Handled Micro Needle HolderFine Science ToolsCat# 12075-12Bonn ScissorsFine Science ToolsCat# 14084-08Iris ScissorsFine Science ToolsCat# 14060-10Suture Grip TipsWexler SurgicalCat# DL0200-YAcu-Tip Cauterizing InstrumentPracticonCat# 70-51711Surgical MicroscopeLeica MicrosystemsCat# OHS1Cotton-Tipped ApplicatorsFisher ScientificCat# 23-400-124Towel DrapesDynarexCat# DYN4410 Step-by-step method details Performing the laparotomy and positioning the colon Timing: 15 min Timing: 15 min These steps describe the initial steps to excising and positioning the colon for the colotomy.1.Place mouse into anesthesia induction chamber with an isoflurane flow rate of 1.0L/min, setting the isoflurane vaporizer to 3.0% for 5 min or until the mouse is fully anesthetized.2.Move mice into the sterile field containing the heating pad and position the mice into the nose cone with a maintenance flow rate of 1.0L/min, set at 1.5–2% isoflurane, continuously monitoring the animals’ respiratory rate and body temperature throughout the duration of the procedure using toe pinch.3.Apply ophthalmic ointment to the cornea and administer 0.5 mg/kg buprenorphine subcutaneously.4.Depilate the abdomen with Nair cream.a.Sterilize the abdomen with povidone iodine and alcohol pads.5.Cover mouse with towel drape with cut rectangle exposing the abdomen.a.Wet drape with PBS to adhere drape to the mouse.6.Create a midline laparotomy extending from the bladder roof to the liver edge (∼2 cm long) (Figure 1A).a.Flush the abdominal cavity with sterile PBS to keep tissues moist.Figure 1Performing the colotomy surgeries(A) Laparotomy formation.(B) Bowel orientation.(C) Colotomy creation.(D) Q-tip denuding.(E) Microdrill head scraping.(F) Stay suture placement.(G) Colotomy closure.(H) Laparotomy closure.Note: The viscera should be routinely flushed (at least once every 3 min) with PBS throughout the procedure to minimize the formation of adhesions.7.Using forceps, remove the perigonadal fat pads from the abdominal cavity and remove them entirely from the gonadal tissue with cautery and scissors.Note: Failure to remove this fat may interfere with the ability of mesenteric fat to interact with the colotomy. Perigonadal fat anatomy differs by sex — in males, the epididymal fat pads are large and bilateral near the testes (remove both; avoid the vas deferens); in females, the parametrial fat pads are smaller and dispersed around the uterine horns (remove conservatively; do not mistake uterine horns for fat).8.Expose the proximal colon.a.Position the cecum, small intestine, and colon in an “M” shape for clear orientation (Figure 1B).Alternatives: This is the end point for sham surgeries. After this, one can return the viscera and close the laparotomy using 6-0 nylon sutures (Ethilon). 1.Place mouse into anesthesia induction chamber with an isoflurane flow rate of 1.0L/min, setting the isoflurane vaporizer to 3.0% for 5 min or until the mouse is fully anesthetized. Place mouse into anesthesia induction chamber with an isoflurane flow rate of 1.0L/min, setting the isoflurane vaporizer to 3.0% for 5 min or until the mouse is fully anesthetized. 2.Move mice into the sterile field containing the heating pad and position the mice into the nose cone with a maintenance flow rate of 1.0L/min, set at 1.5–2% isoflurane, continuously monitoring the animals’ respiratory rate and body temperature throughout the duration of the procedure using toe pinch. Move mice into the sterile field containing the heating pad and position the mice into the nose cone with a maintenance flow rate of 1.0L/min, set at 1.5–2% isoflurane, continuously monitoring the animals’ respiratory rate and body temperature throughout the duration of the procedure using toe pinch. 3.Apply ophthalmic ointment to the cornea and administer 0.5 mg/kg buprenorphine subcutaneously. Apply ophthalmic ointment to the cornea and administer 0.5 mg/kg buprenorphine subcutaneously. 4.Depilate the abdomen with Nair cream.a.Sterilize the abdomen with povidone iodine and alcohol pads. Depilate the abdomen with Nair cream.a.Sterilize the abdomen with povidone iodine and alcohol pads. a.Sterilize the abdomen with povidone iodine and alcohol pads. Sterilize the abdomen with povidone iodine and alcohol pads. 5.Cover mouse with towel drape with cut rectangle exposing the abdomen.a.Wet drape with PBS to adhere drape to the mouse. Cover mouse with towel drape with cut rectangle exposing the abdomen.a.Wet drape with PBS to adhere drape to the mouse. a.Wet drape with PBS to adhere drape to the mouse. Wet drape with PBS to adhere drape to the mouse. 6.Create a midline laparotomy extending from the bladder roof to the liver edge (∼2 cm long) (Figure 1A).a.Flush the abdominal cavity with sterile PBS to keep tissues moist.Figure 1Performing the colotomy surgeries(A) Laparotomy formation.(B) Bowel orientation.(C) Colotomy creation.(D) Q-tip denuding.(E) Microdrill head scraping.(F) Stay suture placement.(G) Colotomy closure.(H) Laparotomy closure. Create a midline laparotomy extending from the bladder roof to the liver edge (∼2 cm long) (Figure 1A).a.Flush the abdominal cavity with sterile PBS to keep tissues moist.Figure 1Performing the colotomy surgeries(A) Laparotomy formation.(B) Bowel orientation.(C) Colotomy creation.(D) Q-tip denuding.(E) Microdrill head scraping.(F) Stay suture placement.(G) Colotomy closure.(H) Laparotomy closure. a.Flush the abdominal cavity with sterile PBS to keep tissues moist. Flush the abdominal cavity with sterile PBS to keep tissues moist. Performing the colotomy surgeries (A) Laparotomy formation. (B) Bowel orientation. (C) Colotomy creation. (D) Q-tip denuding. (E) Microdrill head scraping. (F) Stay suture placement. (G) Colotomy closure. (H) Laparotomy closure. Note: The viscera should be routinely flushed (at least once every 3 min) with PBS throughout the procedure to minimize the formation of adhesions. 7.Using forceps, remove the perigonadal fat pads from the abdominal cavity and remove them entirely from the gonadal tissue with cautery and scissors. Using forceps, remove the perigonadal fat pads from the abdominal cavity and remove them entirely from the gonadal tissue with cautery and scissors. Note: Failure to remove this fat may interfere with the ability of mesenteric fat to interact with the colotomy. Perigonadal fat anatomy differs by sex — in males, the epididymal fat pads are large and bilateral near the testes (remove both; avoid the vas deferens); in females, the parametrial fat pads are smaller and dispersed around the uterine horns (remove conservatively; do not mistake uterine horns for fat). 8.Expose the proximal colon.a.Position the cecum, small intestine, and colon in an “M” shape for clear orientation (Figure 1B). Expose the proximal colon.a.Position the cecum, small intestine, and colon in an “M” shape for clear orientation (Figure 1B). a.Position the cecum, small intestine, and colon in an “M” shape for clear orientation (Figure 1B). Position the cecum, small intestine, and colon in an “M” shape for clear orientation (Figure 1B). Alternatives: This is the end point for sham surgeries. After this, one can return the viscera and close the laparotomy using 6-0 nylon sutures (Ethilon). Creating and closing the colotomy Timing: 30–45 min Timing: 30–45 min These steps describe the techniques for opening and suturing close the colon under tension.9.Make a 5mm longitudinal incision in the colon (colotomy) on the anti-mesenteric side at a 90° angle to the mesenteric plane (Figure 1C).Note: An anatomical landmark for reproducibility can be an incision adjacent to the mesenteric lymph node at the cecum-small-intestine-colon juncture.10.To disrupt the epithelial barrier to promote transmural injury and enhance fibrotic response, denude the epithelium by first rubbing the bowel wall with a dry Q-tip until the bowel becomes translucent (Figure 1D).a.Scrape the bowel wall circumferentially using a rough microdrill head by hand (Dremel) (Figure 1E).11.Place 8-0 nylon stay sutures (AD Surgical), approximately 1 cm in length, on each side of the colotomy.a.Clamp suture ends with heavy hemostats (Figure 1F).12.Approximate the colotomy edges transversely by stretching the stay sutures laterally (1.5 mm on each side) to obtain a final colotomy width of approximately 8mm.13.Close the colotomy transversely using approximately 12-14 simple-interrupted 8-0 nylon sutures while keeping the stay sutures taut (∼0.5 mm bites placed <0.5 mm apart) (Figure 1G).Note: Suture required for closure may be adjusted given the size of the colotomy.Alternatives: For the unstretched colotomy, keep the stay sutures slack throughout the surgery and closure, using only the minimal amount of tension to approximate the edges. 9.Make a 5mm longitudinal incision in the colon (colotomy) on the anti-mesenteric side at a 90° angle to the mesenteric plane (Figure 1C). Make a 5mm longitudinal incision in the colon (colotomy) on the anti-mesenteric side at a 90° angle to the mesenteric plane (Figure 1C). Note: An anatomical landmark for reproducibility can be an incision adjacent to the mesenteric lymph node at the cecum-small-intestine-colon juncture. 10.To disrupt the epithelial barrier to promote transmural injury and enhance fibrotic response, denude the epithelium by first rubbing the bowel wall with a dry Q-tip until the bowel becomes translucent (Figure 1D).a.Scrape the bowel wall circumferentially using a rough microdrill head by hand (Dremel) (Figure 1E). To disrupt the epithelial barrier to promote transmural injury and enhance fibrotic response, denude the epithelium by first rubbing the bowel wall with a dry Q-tip until the bowel becomes translucent (Figure 1D).a.Scrape the bowel wall circumferentially using a rough microdrill head by hand (Dremel) (Figure 1E). a.Scrape the bowel wall circumferentially using a rough microdrill head by hand (Dremel) (Figure 1E). Scrape the bowel wall circumferentially using a rough microdrill head by hand (Dremel) (Figure 1E). 11.Place 8-0 nylon stay sutures (AD Surgical), approximately 1 cm in length, on each side of the colotomy.a.Clamp suture ends with heavy hemostats (Figure 1F). Place 8-0 nylon stay sutures (AD Surgical), approximately 1 cm in length, on each side of the colotomy.a.Clamp suture ends with heavy hemostats (Figure 1F). a.Clamp suture ends with heavy hemostats (Figure 1F). Clamp suture ends with heavy hemostats (Figure 1F). 12.Approximate the colotomy edges transversely by stretching the stay sutures laterally (1.5 mm on each side) to obtain a final colotomy width of approximately 8mm. Approximate the colotomy edges transversely by stretching the stay sutures laterally (1.5 mm on each side) to obtain a final colotomy width of approximately 8mm. 13.Close the colotomy transversely using approximately 12-14 simple-interrupted 8-0 nylon sutures while keeping the stay sutures taut (∼0.5 mm bites placed <0.5 mm apart) (Figure 1G). Close the colotomy transversely using approximately 12-14 simple-interrupted 8-0 nylon sutures while keeping the stay sutures taut (∼0.5 mm bites placed <0.5 mm apart) (Figure 1G). Note: Suture required for closure may be adjusted given the size of the colotomy. Alternatives: For the unstretched colotomy, keep the stay sutures slack throughout the surgery and closure, using only the minimal amount of tension to approximate the edges. Stretching the colotomy and returning the viscera Timing: 30 min Timing: 30 min These steps describe the techniques for stretching the closed colotomy and finishing the surgery.14.Stretch the colotomy by spreading the hemostats and placing forceps in between to sustain continuous, maximal tension in the stay sutures without ripping the bowel for 15 min.Alternatives: For the mesenteric graft surgery, sacrifice a sex-matched tamoxifen-induced donor mouse (e.g. Col1a2-CreERT2; YAPlox/+;TAZlox/+; ZsGreen+ or Col1a2-CreERT2; YAPlox/lox; TAZlox/lox; ZsGreen+), harvest a 5mm x 5mm piece of mesenteric adipose tissue, and immediately wash in ice-cold PBS. Add one drop of VetBond (3M) to the recipient mesentery adjacent to the colotomy and place the donor mesentery on top. Drape the donor mesentery over the colotomy site as well as the distal bowel and suture it onto the recipient mucosa using 8-0 nylon suture.Alternatives: For the unstretched colotomy, do not provide any additional stretching after closure.Note: Maximal tension can be defined as stretch until stay sutures are visibly taut while the bowel wall blanches but the sutures are not tearing through. This should result in the bowel wall being stretched a standardized 0.8 cm distance apart for each animal. To further ensure similar tension across experimental groups, mice should also be age- and sex-matched.Note: VetBond should not contact the bowel lumen, as it is cytotoxic to mucosa.15.Confirm luminal integrity by gently milking a fecal pellet through the colotomy site using moist cotton-tip applicators, while applying gentle counter-pressure on the serosal surface.CRITICAL: This step is essential to ensure the proper closure of the colotomy.16.Flush the viscera extensively with PBS and return the viscera to the abdomen ensuring that the colotomy site does not directly contact adjacent viscera.17.Close the laparotomy using 6-0 nylon sutures (Ethilon) in two layers: (1) simple interrupted pattern for peritoneum/fascia, and (2) horizontal mattress style for skin (Figure 1H).18.Administer 5 mg/kg of carprofen subcutaneously. 14.Stretch the colotomy by spreading the hemostats and placing forceps in between to sustain continuous, maximal tension in the stay sutures without ripping the bowel for 15 min.Alternatives: For the mesenteric graft surgery, sacrifice a sex-matched tamoxifen-induced donor mouse (e.g. Col1a2-CreERT2; YAPlox/+;TAZlox/+; ZsGreen+ or Col1a2-CreERT2; YAPlox/lox; TAZlox/lox; ZsGreen+), harvest a 5mm x 5mm piece of mesenteric adipose tissue, and immediately wash in ice-cold PBS. Add one drop of VetBond (3M) to the recipient mesentery adjacent to the colotomy and place the donor mesentery on top. Drape the donor mesentery over the colotomy site as well as the distal bowel and suture it onto the recipient mucosa using 8-0 nylon suture.Alternatives: For the unstretched colotomy, do not provide any additional stretching after closure.Note: Maximal tension can be defined as stretch until stay sutures are visibly taut while the bowel wall blanches but the sutures are not tearing through. This should result in the bowel wall being stretched a standardized 0.8 cm distance apart for each animal. To further ensure similar tension across experimental groups, mice should also be age- and sex-matched.Note: VetBond should not contact the bowel lumen, as it is cytotoxic to mucosa. Stretch the colotomy by spreading the hemostats and placing forceps in between to sustain continuous, maximal tension in the stay sutures without ripping the bowel for 15 min.Alternatives: For the mesenteric graft surgery, sacrifice a sex-matched tamoxifen-induced donor mouse (e.g. Col1a2-CreERT2; YAPlox/+;TAZlox/+; ZsGreen+ or Col1a2-CreERT2; YAPlox/lox; TAZlox/lox; ZsGreen+), harvest a 5mm x 5mm piece of mesenteric adipose tissue, and immediately wash in ice-cold PBS. Add one drop of VetBond (3M) to the recipient mesentery adjacent to the colotomy and place the donor mesentery on top. Drape the donor mesentery over the colotomy site as well as the distal bowel and suture it onto the recipient mucosa using 8-0 nylon suture.Alternatives: For the unstretched colotomy, do not provide any additional stretching after closure.Note: Maximal tension can be defined as stretch until stay sutures are visibly taut while the bowel wall blanches but the sutures are not tearing through. This should result in the bowel wall being stretched a standardized 0.8 cm distance apart for each animal. To further ensure similar tension across experimental groups, mice should also be age- and sex-matched.Note: VetBond should not contact the bowel lumen, as it is cytotoxic to mucosa. Alternatives: For the mesenteric graft surgery, sacrifice a sex-matched tamoxifen-induced donor mouse (e.g. Col1a2-CreERT2; YAPlox/+;TAZlox/+; ZsGreen+ or Col1a2-CreERT2; YAPlox/lox; TAZlox/lox; ZsGreen+), harvest a 5mm x 5mm piece of mesenteric adipose tissue, and immediately wash in ice-cold PBS. Add one drop of VetBond (3M) to the recipient mesentery adjacent to the colotomy and place the donor mesentery on top. Drape the donor mesentery over the colotomy site as well as the distal bowel and suture it onto the recipient mucosa using 8-0 nylon suture. Alternatives: For the unstretched colotomy, do not provide any additional stretching after closure. Note: Maximal tension can be defined as stretch until stay sutures are visibly taut while the bowel wall blanches but the sutures are not tearing through. This should result in the bowel wall being stretched a standardized 0.8 cm distance apart for each animal. To further ensure similar tension across experimental groups, mice should also be age- and sex-matched. Note: VetBond should not contact the bowel lumen, as it is cytotoxic to mucosa. 15.Confirm luminal integrity by gently milking a fecal pellet through the colotomy site using moist cotton-tip applicators, while applying gentle counter-pressure on the serosal surface.CRITICAL: This step is essential to ensure the proper closure of the colotomy. Confirm luminal integrity by gently milking a fecal pellet through the colotomy site using moist cotton-tip applicators, while applying gentle counter-pressure on the serosal surface.CRITICAL: This step is essential to ensure the proper closure of the colotomy. CRITICAL: This step is essential to ensure the proper closure of the colotomy. 16.Flush the viscera extensively with PBS and return the viscera to the abdomen ensuring that the colotomy site does not directly contact adjacent viscera. Flush the viscera extensively with PBS and return the viscera to the abdomen ensuring that the colotomy site does not directly contact adjacent viscera. 17.Close the laparotomy using 6-0 nylon sutures (Ethilon) in two layers: (1) simple interrupted pattern for peritoneum/fascia, and (2) horizontal mattress style for skin (Figure 1H). Close the laparotomy using 6-0 nylon sutures (Ethilon) in two layers: (1) simple interrupted pattern for peritoneum/fascia, and (2) horizontal mattress style for skin (Figure 1H). 18.Administer 5 mg/kg of carprofen subcutaneously. Administer 5 mg/kg of carprofen subcutaneously. Harvesting and fixing the colotomy Timing: 2–3 weeks Timing: 2–3 weeks These steps describe the techniques for the post-operative harvesting of the tissue from the colotomy.Note: All tissue samples should be on ice-cold sterile PBS.19.After post-operative day (POD) 14, euthanize the mouse using CO2 and cervical dislocation.20.Excise the colotomy and 1 cm of additional uninvolved bowel distal to the colotomy (Figure 2A).a.Trim associated mesenteric adipose tissue to approximately 1 mm away from the bowel.Figure 2Harvesting colotomy samples(A) Colotomy tissue with adjacent bowel.(B) The feces being wash out of the bowel sample.(C) The colotomy site marked with a surgical skin marker.(D) Colotomy tissue and adjacent tissue cut from each other.(E) Colotomy and adjacent tissue embedded in OCT block.21.Flush the lumen with PBS three times with a gavage needle to remove feces (Figure 2B).22.Flush the lumen with 4% paraformaldehyde (PFA) before placing sample in conical of 4% PFA and storing at 4°C.23.After 24 hours, wash sample with PBS and incubate in 30% sucrose for 3-7 days at 4°C until saturation. Note: All tissue samples should be on ice-cold sterile PBS. 19.After post-operative day (POD) 14, euthanize the mouse using CO2 and cervical dislocation. After post-operative day (POD) 14, euthanize the mouse using CO2 and cervical dislocation. 20.Excise the colotomy and 1 cm of additional uninvolved bowel distal to the colotomy (Figure 2A).a.Trim associated mesenteric adipose tissue to approximately 1 mm away from the bowel.Figure 2Harvesting colotomy samples(A) Colotomy tissue with adjacent bowel.(B) The feces being wash out of the bowel sample.(C) The colotomy site marked with a surgical skin marker.(D) Colotomy tissue and adjacent tissue cut from each other.(E) Colotomy and adjacent tissue embedded in OCT block. Excise the colotomy and 1 cm of additional uninvolved bowel distal to the colotomy (Figure 2A).a.Trim associated mesenteric adipose tissue to approximately 1 mm away from the bowel.Figure 2Harvesting colotomy samples(A) Colotomy tissue with adjacent bowel.(B) The feces being wash out of the bowel sample.(C) The colotomy site marked with a surgical skin marker.(D) Colotomy tissue and adjacent tissue cut from each other.(E) Colotomy and adjacent tissue embedded in OCT block. a.Trim associated mesenteric adipose tissue to approximately 1 mm away from the bowel. Trim associated mesenteric adipose tissue to approximately 1 mm away from the bowel. Harvesting colotomy samples (A) Colotomy tissue with adjacent bowel. (B) The feces being wash out of the bowel sample. (C) The colotomy site marked with a surgical skin marker. (D) Colotomy tissue and adjacent tissue cut from each other. (E) Colotomy and adjacent tissue embedded in OCT block. 21.Flush the lumen with PBS three times with a gavage needle to remove feces (Figure 2B). Flush the lumen with PBS three times with a gavage needle to remove feces (Figure 2B). 22.Flush the lumen with 4% paraformaldehyde (PFA) before placing sample in conical of 4% PFA and storing at 4°C. Flush the lumen with 4% paraformaldehyde (PFA) before placing sample in conical of 4% PFA and storing at 4°C. 23.After 24 hours, wash sample with PBS and incubate in 30% sucrose for 3-7 days at 4°C until saturation. After 24 hours, wash sample with PBS and incubate in 30% sucrose for 3-7 days at 4°C until saturation. Embedding and sectioning the colotomy Timing: 2 days Timing: 2 days These steps describe the techniques for processing the fixed colotomy tissue.24.Mark the colotomy with a surgical skin marker (Figure 2C).25.Cut the bowel tissue approximately 0.5 cm distal to the colotomy.Note: This section will be used as the internal adjacent sample to the colotomy (Figure 2D).26.Embed the colotomy and adjacent segment sample in OCT compound, orienting the cecal-distal face of each sample toward the cutting face of the block (Figure 2E).a.Store the blocks at −20°C.27.Section the blocks at 5-12μm with a blade temperature of 30°C and a stage temperature of −35°C.a.Use the surgical ink and colotomy sutures as indicators of where the colotomy is located.b.Obtain approximately 4-5 serial sections in approximately 15-20 regions within the colotomy.i.Use the regions with the thickest area of the colotomy site containing CF for histological analysis.Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group.ii.Exclude samples containing stay sutures due to distorted histology.iii.Exclude samples containing adhered organs covering greater than 50% of the colotomy site due to lack of CF wrapping for adhesions. 24.Mark the colotomy with a surgical skin marker (Figure 2C). Mark the colotomy with a surgical skin marker (Figure 2C). 25.Cut the bowel tissue approximately 0.5 cm distal to the colotomy.Note: This section will be used as the internal adjacent sample to the colotomy (Figure 2D). Cut the bowel tissue approximately 0.5 cm distal to the colotomy.Note: This section will be used as the internal adjacent sample to the colotomy (Figure 2D). Note: This section will be used as the internal adjacent sample to the colotomy (Figure 2D). 26.Embed the colotomy and adjacent segment sample in OCT compound, orienting the cecal-distal face of each sample toward the cutting face of the block (Figure 2E).a.Store the blocks at −20°C. Embed the colotomy and adjacent segment sample in OCT compound, orienting the cecal-distal face of each sample toward the cutting face of the block (Figure 2E).a.Store the blocks at −20°C. a.Store the blocks at −20°C. Store the blocks at −20°C. 27.Section the blocks at 5-12μm with a blade temperature of 30°C and a stage temperature of −35°C.a.Use the surgical ink and colotomy sutures as indicators of where the colotomy is located.b.Obtain approximately 4-5 serial sections in approximately 15-20 regions within the colotomy.i.Use the regions with the thickest area of the colotomy site containing CF for histological analysis.Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group.ii.Exclude samples containing stay sutures due to distorted histology.iii.Exclude samples containing adhered organs covering greater than 50% of the colotomy site due to lack of CF wrapping for adhesions. Section the blocks at 5-12μm with a blade temperature of 30°C and a stage temperature of −35°C.a.Use the surgical ink and colotomy sutures as indicators of where the colotomy is located.b.Obtain approximately 4-5 serial sections in approximately 15-20 regions within the colotomy.i.Use the regions with the thickest area of the colotomy site containing CF for histological analysis.Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group.ii.Exclude samples containing stay sutures due to distorted histology.iii.Exclude samples containing adhered organs covering greater than 50% of the colotomy site due to lack of CF wrapping for adhesions. a.Use the surgical ink and colotomy sutures as indicators of where the colotomy is located. Use the surgical ink and colotomy sutures as indicators of where the colotomy is located. b.Obtain approximately 4-5 serial sections in approximately 15-20 regions within the colotomy.i.Use the regions with the thickest area of the colotomy site containing CF for histological analysis.Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group.ii.Exclude samples containing stay sutures due to distorted histology.iii.Exclude samples containing adhered organs covering greater than 50% of the colotomy site due to lack of CF wrapping for adhesions. Obtain approximately 4-5 serial sections in approximately 15-20 regions within the colotomy.i.Use the regions with the thickest area of the colotomy site containing CF for histological analysis.Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group.ii.Exclude samples containing stay sutures due to distorted histology.iii.Exclude samples containing adhered organs covering greater than 50% of the colotomy site due to lack of CF wrapping for adhesions. i.Use the regions with the thickest area of the colotomy site containing CF for histological analysis.Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group. Use the regions with the thickest area of the colotomy site containing CF for histological analysis.Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group. Note: Identifying the region with the thickest area requires sectioning through the entire colotomy and selecting sections with the thickest bowel wall using light microscopy after sectioning and confirmed using H&E or trichrome. To minimize sampling bias, sectioning should always be performed blinded to the experimental group. ii.Exclude samples containing stay sutures due to distorted histology. Exclude samples containing stay sutures due to distorted histology. iii.Exclude samples containing adhered organs covering greater than 50% of the colotomy site due to lack of CF wrapping for adhesions. Exclude samples containing adhered organs covering greater than 50% of the colotomy site due to lack of CF wrapping for adhesions. Expected outcomes In the standard model, creeping fat is expected to localize exclusively to the colotomy sites, with initial wrapping evident by POD 7 and maximal involvement by POD 14 (Figure 3A). Sham-operated or uninvolved bowel segments should not demonstrate fat wrapping. At the colotomy site, the bowel wall should show transmural fibrosis and an expanded muscularis propria layer (Figure 3B). Under these conditions, approximately 70% of colotomies are anticipated to develop creeping fat, whereas the remaining 30% may instead form visceral adhesions. For histological measurements, we quantified bowel wall thickness, muscularis propria thickness, trichrome positive area, MAT circumference, and mesenteric angle (Figure 3C). Bowel wall thickness was defined as the distance between the top of the submucosa and the first MAT adipocytes. Approximately 15 different lengths were measured and averaged within each serial section from bowel covered by MAT unless otherwise specified. To measure muscularis propria expansion, approximately 15 different lengths were measured and averaged within each serial section from bowel covered by MAT unless otherwise specified. To measure trichrome positive area, blue trichrome area was quantified in the bowel wall adjacent to MAT between the top of the submucosa to the first MAT adipocyte using Threshold Color on ImageJ with the same settings applied across all images in the same experiment. To capture mesenteric fat wrapping, we measured the total circumference by quantifying the area of MAT-covered bowel was divided by total bowel circumference and mesenteric angle, where the leading edges of MAT were identified and the angle between the leading edges and a point halfway between them on the bowel was then measured. For each metric, we used 2-5 serial sections for each experimental condition and at least 3 biological replicates. The unstretched colotomies should display markedly reduced transmural fibrosis and substantially less CF wrapping compared with the stretched standard model. The mesenteric grafting experiment should show cells expressing the fluorescent positive lineage-traced marker (in this experiment Col1a2-positive cells express ZsGreen) in the mesentery as well as infiltrating into the bowel (Figure 3D).Figure 3Quantify colotomy samples(A) Gross histology of post-operative day (POD) 14 mouse colotomy.(B) Masson’s Trichrome stained POD 14 mouse colotomy section.(C) Fibrosis metrics used for quantifying histological fibrosis in bowel (left) and MAT (right) by Masson’strichrome.For thickness and trichrome measurements, region of interest is outlined (blue) where sample thickness (black bars) and trichrome positive area (red) are measured. CF circumference (red outline), bowel wall circumference (black), and MAT is highlighted (yellow). MAT angle is displayed (black lines).(D) Immunostaining for GFP (green) and DAPI (blue) in mesenteric grafting experiment at POD 14. GFP+DAPI+ cells. Bowel wall (BW) and MAT outlined. Scale Bars: 1 cm (A). 200 μm (B, C and D (lower magnification)). 50 μm (C (higher magnification)). 20 μm (D (higher magnification)). Figure reprinted with permission from Bauer-Rowe et al.1 Quantify colotomy samples (A) Gross histology of post-operative day (POD) 14 mouse colotomy. (B) Masson’s Trichrome stained POD 14 mouse colotomy section. (C) Fibrosis metrics used for quantifying histological fibrosis in bowel (left) and MAT (right) by Masson’strichrome. For thickness and trichrome measurements, region of interest is outlined (blue) where sample thickness (black bars) and trichrome positive area (red) are measured. CF circumference (red outline), bowel wall circumference (black), and MAT is highlighted (yellow). MAT angle is displayed (black lines). (D) Immunostaining for GFP (green) and DAPI (blue) in mesenteric grafting experiment at POD 14. GFP+DAPI+ cells. Bowel wall (BW) and MAT outlined. Scale Bars: 1 cm (A). 200 μm (B, C and D (lower magnification)). 50 μm (C (higher magnification)). 20 μm (D (higher magnification)). Figure reprinted with permission from Bauer-Rowe et al.1 Limitations The procedure requires precise microsurgical skills, particularly the application of mechanical tension. Inter-operator variability in the duration or intensity of stretching can impact the severity of fibrosis. Additionally, approximately 30% of surgeries may result in non-specific visceral adhesions (to adjacent bowel) rather than true creeping fat wrapping; these samples fail to recapitulate the specific CF-bowel interaction and must be subsequently excluded. As noted in our study, this model relies on a discrete surgical event (colotomy followed by tension) to induce fibrosis. Unlike chemical colitis models (e.g., DSS, TNBS) or spontaneous genetic models (e.g., SAMP1/YitFc), this model lacks a chronic, relapsing-remitting inflammatory background. Consequently, while it effectively isolates the mechanical drivers of creeping fat and stricture formation, it may not capture the early immunological events or the spatiotemporal dynamics of fibroblast emergence seen in chronic inflammation. Troubleshooting Problem 1 There is tearing of the bowel during the surgery in step 14 from applying tension too rapidly or using suture material that is too thick/thin. Potential solution Apply tension gradually over 30–60 seconds before locking the hemostats for the 15-min duration. Ensure 8-0 nylon is used; thinner sutures may cut through the tissue (cheese-wire effect), while thicker sutures may cause excessive trauma. Problem 2 There is high mortality prior to post-operative day 7 prior to step 18, potentially caused by bowel obstructions from excessive luminal narrowing during closure, or bowel perforation and leakage from loose sutures or tissue tearing. Potential solution Ensure the incision is closed transversely (suturing top-to-bottom relative to the longitudinal cut) rather than longitudinally. Use the stay sutures to keep the lumen wide open during closure. Verify luminal patency intra-operatively by forcing a fecal pellet past the suture line before closing the abdomen. If a leak is found, place an additional interrupted 8-0 suture. Avoid grasping the bowel wall directly with toothed forceps during stretching; use the hemostats on the stay sutures instead. Problem 3 There is a lack of creeping fat (mesenteric adipose tissue) formation due to visceral adhesions found in step 26. Potential solution Create the colotomy strictly at a 90° angle to the mesenteric plane to maximize proximity to the fat. Flush the abdominal cavity extensively with sterile PBS throughout the procedure. Ensure the mesentery is draped over the repair site before closing the laparotomy. Even with adequate precautions, up to 30% of mice may develop adhesions. Problem 4 There is inconsistent fibrosis severity, potentially due to the mechanical stretch being insufficient or inconsistent between mice discovered in step 26. Potential solution Use a timer to ensure exactly 15 min of stretching. Use a spacer (e.g., forceps of a fixed width) between the hemostats to maintain “maximal tension” consistently across all animals. The stay sutures should be taut but not ripping through the tissue. Resource availability Lead contact Further information and requests for resources and reagents should be directed to and will be fulfilled by the lead contact, Jeong S. Hyun (jhyun1@stanford.edu). Technical contact Technical questions on executing this protocol should be directed to and will be answered by the technical contact, Jeong S. Hyun (jhyun1@stanford.edu). Materials availability This study did not generate new unique reagents. Data and code availability This study did not generate datasets or code. Acknowledgments Studies were provided by the 10.13039/100005405American Surgical Association (J.S.H.); Jay Grosfeld, MD Scholar Grant (J.S.H.); the American Pediatric Surgical Association Foundation (J.S.H.); the Stanford Department of Surgery (J.S.H.); the Stanford Medical Scientist Training Program 1T32-GM145402-01 (K.E.B.-R.); 10.13039/100005301American College of Surgeons (N.E.L.); and the Hagey Laboratory for Pediatric Regenerative Medicine (M.T.L. and J.S.H.). The graphical abstract/Figures were created using Biorender.com. Author contributions K.E.B.-R. developed the surgical model in collaboration with A.K., D.S.F., J.A.N., and D.D. K.E.B.-R., A.K., and N.E.L. performed the colotomy surgeries for in vivo experiments. K.E.B.-R., B.P., A.K., E.J.S., and J.Y.P. processed mouse samples and prepared samples for histology. E.J.S., B.P., K.E.B.-R., M.T.L., and J.S.H. wrote and revised the manuscript with input from all authors. Declaration of interests Stanford Provisional patent: “YAP Inhibition for Intestinal Fibrosis,” serial no. 63/818,707 (M.T.L., J.S.H., A.K., B.P., N.E.L., and K.E.B.-R.).