Wave propagation in dual-porosity media under the combined effects of light, heat, elasticity, and gravity Authors: Najmeddine Attia, Taoufik Moulahi, Abdelaala Ahmed, E. S. Elidy Published: 2026 ABSTRACT This paper investigates the propagation of two-dimensional thermoelastic waves in a semiconductor medium characterized by double porosity and subjected to the influence of gravity. We develop the theoretical framework using the Lord–Shulman (L–S) and Green–Lindsay (G–L) models. Both models account for finite thermal wave speeds and relaxation times. The coupled governing equations describing temperature, carrier density, stress, and displacement fields are analytically solved using the harmonic wave method. The analysis emphasizes the combined influence of gravitational acceleration, temporal variation, and thermoelastic coupling on the dynamic behavior of the medium. Three-dimensional graphical results illustrate the interactions among these parameters and their impact on thermal and mechanical responses. The findings show that gravity significantly modifies the amplitude and spatial distribution of thermoelastic waves, enhancing the coupling between thermal and elastic fields within the porous structure. Comparative evaluation of the CD, L–S, and G–L theories reveals the crucial roles of relaxation times and gravitational effects in controlling thermoelastic wave propagation in double-porosity semiconductor materials. Introduction The thermoelasticity theory explains how elastic bodies respond to combined thermal and mechanical effects. Interest in this theory arises from several practical applications. For instance, in aeronautics, metallic structures—typically elastic—are subjected to intense thermal stresses due to high velocities, necessitating analysis of their behavior under such conditions. In nuclear reactors, elevated temperatures and thermal gradients produced by nuclear reactions generate significant thermal stresses, requiring construction using materials with special thermoelastic properties. During the latter half of the twentieth century, Biot1 proposed the coupled thermoelasticity theory (CD theory), derived from Fourier’s heat conduction law, to address inconsistencies in the classical uncoupled thermoelasticity theory (CUCT). The traditional CUCT contained a physical contradiction, as it implied parabolic heat propagation with an unrealistically infinite speed. To overcome this issue, a relaxation time parameter was introduced into the heat equation2. Later, Green and Lindsay (G–L)3 advanced this approach by incorporating two relaxation times, developing what became known as the generalized thermoelasticity theory. Many researchers4–6 have applied this generalized framework to analyze a variety of physical problems. More recently, thermal shock problems have been examined within the scope of the generalized thermoelasticity theory, using the two-temperature model in two-dimensional contexts influenced by multiple external fields7,8. Semiconductors hold significant importance in modern technology, particularly in electronic and electrical circuit applications. Hence, it is essential to develop models that describe their behavior when exposed to external factors such as light, which induces thermal effects. Internal excitation processes lead to particle displacements, resulting in thermoelastic (TE) deformations. Additionally, photo-excitation triggers optical or photothermal transport mechanisms, causing the transfer of surface electrons and generating carrier density variations associated with plasma waves—this phenomenon is termed electronic deformation (ED). Gordon et al.9 were among the earliest to explore semiconductor properties through the study of acoustic waves produced by electromagnetic radiation. Later, photoacoustic spectroscopy was used to analyze the effect of laser illumination on semiconductor media10. Numerous studies11–13 subsequently employed photothermal theory and photoacoustic methods to assess how laser beams interact with solid and fluid samples. The photothermal diffusion process, together with temperature gradients, has been applied to examine variable thermal conductivity in semiconductors14. Theoretical models based on photothermal principles have also been utilized to estimate various physical characteristics of solid elastic semiconductor materials and to describe interactions between plasma and thermoelastic waves15. Lotfy and Tantawi16 investigated the coupling between thermoelastic and photothermal theories in a non-homogeneous nanocomposite semiconductor, forming what is referred to as the photo-thermoelasticity theory. More recently, several researchers17–19 have analyzed the behavior of plasma–thermal–elastic waves in semiconductors under the framework of generalized magneto-thermoelasticity theory, incorporating new formulations such as the two-temperature and hyperbolic two-temperature models. The concept of double porosity has emerged as a significant extension of classical poroelastic and thermoelastic theories to describe the behavior of materials possessing two distinct pore systems, each characterized by different pore sizes and interactions. This framework, originally proposed to model geological formations such as fractured rocks and later extended to engineered porous materials, captures the complex coupling between mechanical, thermal, and diffusive fields occurring within media that contain both macro- and micro-porous networks. In double-porosity media, the solid matrix is permeated by a primary pore network and a secondary pore system, allowing for fluid exchange between them, which profoundly influences the material’s response under mechanical loading, thermal gradients, and electromagnetic effects. Ieşan and Quintanilla20 established a comprehensive thermomechanical model for double-porosity structures, incorporating thermal stresses and porosity interactions to analyze stability and wave propagation phenomena. Recent developments by Yahya and Abd-Alla21 have extended this theory to rotating magneto-thermoelastic systems, highlighting the influence of magnetic fields and rotational motion on thermal and mechanical behavior under double-porosity effects. Similarly, Salah et al.22 investigated nonlocal and diffusion effects in rotating thermoelastic media with double porosity, showing how nonlocal elasticity modifies wave characteristics and stress distributions. Their further work on magneto-thermoelastic responses under initial stress emphasized the coupling between magnetic fields, rotation, and porosity parameters in influencing deformation and energy dissipation23. Complementary studies by Kumar and Paswan24 analyzed reflection phenomena of plane waves in fractional thermoelastic double-porosity media, revealing the combined effects of rotation, initial stress, and fractional derivatives on dynamic wave behavior. Collectively, these studies demonstrate that the inclusion of double porosity enhances the predictive capability of thermoelastic models, enabling more accurate simulation of heat conduction, fluid movement, and stress evolution in complex materials. The interaction between the two pore systems leads to additional relaxation times and coupled field equations, producing rich dynamic responses that are crucial for understanding natural materials such as rocks, bones, and advanced porous composites. The theory also serves as a foundation for exploring coupled magneto-thermoelastic and diffusion phenomena in modern engineering materials where microstructural heterogeneity plays a key role. Double-porosity models thus provide a powerful theoretical framework to analyze coupled physical processes in multi-porous media subjected to thermal, mechanical, and electromagnetic influences, bridging the gap between classical continuum mechanics and the multiscale behavior observed in real-world materials. The effect of gravity on thermoelastic materials is essential in understanding how body forces influence deformation, temperature distribution, and stress fields in solids. When a thermoelastic body is subjected to a gravitational field, the equilibrium and heat conduction equations become strongly coupled, altering both the transient and steady-state behaviors of the material. Gravity-induced stresses significantly affect thermoelastic wave propagation, stability, and energy transport, making their inclusion vital in applications such as geophysics, aerospace, and structural analysis. Bayones et al.25 examined a thermoelastic medium exposed to a gravity field and laser pulse within four generalized thermoelastic theories, showing that gravity modifies temperature profiles and displacement responses, especially during transient heating. Ramadan et al.26analyzed temperature-dependent thermoelasticity under gravity within the Lord–Shulman framework, revealing that gravitational forces reduce wave speeds and alter relaxation characteristics due to their effect on the thermal field. Kadian et al.27 studied the combined effects of initial stress and gravity on fiber-reinforced thermoelastic materials using the Moore–Gibson–Thompson model, demonstrating that gravitational forces interact with pre-stress and reinforcement anisotropy to influence dynamic stability. These investigations confirm that gravity cannot be neglected in thermoelastic modeling, as it directly impacts thermal stresses, strain energy distribution, and the evolution of temperature-dependent fields. Understanding thermoelastic behavior under gravity provides critical insight into material performance in real-world environments, from Earth’s crustal layers to high-altitude and space applications. The concept of relaxation time in thermoelasticity represents the finite speed of thermal and mechanical wave propagation by accounting for the time delay between applied thermal disturbances and resulting heat flux or stress responses. It overcomes the unrealistic infinite heat conduction predicted by classical Fourier’s law. Goswami and Sarkar28 analyzed wave propagation in thermoelastic media with relaxation time and showed that relaxation effects lead to attenuation and dispersion of thermoelastic waves. Prasad29 studied the influence of scale length on wave behavior under size-dependent thermoelasticity with one relaxation time, demonstrating that both microstructural and temporal parameters significantly modify phase velocity and energy dissipation. Fernández and Quintanilla30 investigated decay and regularity in second-gradient thermoelastic plates, revealing that relaxation time enhances system stability and smoothness of temperature and displacement fields. Overall, relaxation time introduces realistic transient responses, finite propagation speeds, and improved thermomechanical modeling accuracy for advanced materials. Recent advances in thermoelasticity and wave propagation in complex media have emphasized the importance of incorporating non-classical heat conduction models and microstructural effects to accurately describe material behavior under extreme conditions. Rayleigh waves are surface acoustic waves that propagate along the boundary of elastic media, with amplitudes that decay exponentially with depth. In nonlocal piezothermoelastic orthotropic media, their behavior becomes more complex due to the combined influence of anisotropy, electromechanical coupling, and long-range interactions31. Nonlocal theory accounts for size-dependent effects, which are particularly important in micro- and nano-scale structures where classical elasticity fails to provide accurate predictions. In such media, the coupling between thermal, electrical, and mechanical fields significantly affects the propagation characteristics of Rayleigh waves, including velocity, attenuation, and dispersion32. The presence of phase-lag models further refines the analysis by incorporating finite thermal and diffusive response times. Additionally, orthotropic material properties introduce directional dependence, which alters wave behavior along different axes. These combined effects make the study of Rayleigh waves in nonlocal piezothermoelastic media essential for applications in sensors, actuators, and advanced smart materials33–35. Recent advances in material science and thermoelastic modeling have focused on improving the understanding and prediction of mechanical and thermal behavior in complex media. In semiconductor materials, precise control of surface integrity and subsurface damage is essential for maintaining performance, especially under manufacturing processes such as precision grinding36. The interaction between thermal and mechanical effects also plays a key role in porous and multiphase systems, where heat transfer mechanisms can be accurately described using multi-energy equation models37. In geophysical and engineering applications, external forces such as tidal loading influence subsurface stiffness and deformation, highlighting the importance of coupled thermoelastic and mechanical analysis38. Moreover, emerging concepts such as mechanical cloaking and material camouflage demonstrate how internal structural design can manipulate stress distribution and elastic wave propagation39. The integration of data-driven approaches with thermoelastic theory has further enabled the identification of uncertain material parameters, enhancing predictive capabilities in complex systems40. These developments collectively contribute to a deeper understanding of thermoelastic behavior in advanced materials and structures under coupled physical effects. Recent developments in solid mechanics and wave dynamics have highlighted the complex behavior of elastic waves in advanced materials and engineered systems. Elastic-wave propagation is strongly influenced by material heterogeneity, structural design, and external excitations, leading to phenomena such as wave asymmetry and directional propagation control41. In engineered structures, vibration characteristics are highly sensitive to defects, imperfections, and geometric variations, which can significantly alter resonance frequencies and dynamic stability42. At micro- and nano-scales, material properties such as elastic modulus exhibit orientation-dependent fluctuations, which affect local deformation and wave transmission behavior43. In addition, advanced metamaterials have demonstrated the ability to control and attenuate low-frequency elastic and seismic waves through tailored band structures and internal architectures44. The interaction between mechanical vibrations and control systems, such as inverter-driven devices, also plays a role in managing harmonic responses and improving system performance45. These combined effects emphasize the importance of integrated analytical and experimental approaches for understanding and controlling elastic wave behavior in modern engineering applications. The present work introduces four novel contributions that extend significantly beyond existing literature. First, while previous studies have investigated double-porosity thermoelasticity20, photothermal semiconductors46, and gravitational effects25 separately, no prior work has simultaneously coupled all four effects light, heat, elasticity, and gravity in a unified double-porosity semiconductor model, revealing interactions such as gravity-modulated photothermal conversion and porosity-dependent thermoelastic damping that cannot be captured by partial models. Second, this study provides the first systematic comparative analysis of CD, L–S, and G–L theories under identical double-porosity, photothermal, and gravitational conditions, demonstrating that the choice of theory affects predicted amplitudes by up to 60% and that the G–L theory with two relaxation times produces the most physically realistic results by capturing multi-scale relaxation processes (phonon–phonon scattering at 1–10 ps, electron–phonon scattering at 0.1–1 ps, and thermal diffusion over 10 ns). Third, we provide the first quantitative demonstration that gravity reduces displacement amplitude by 30%, increases stress by 20%, and enhances near-surface temperature by 15% in double-porosity semiconductors through three mechanisms: gravitational compression adding σ_gravity = ρg x3, compressive strain converting to heat via ε₁∇·u, and gravity acting as a restoring force opposing upward wave propagation—findings with direct implications for large-scale semiconductor devices where gravitational forces are typically neglected. Fourth, we quantify how the thermoelastic coupling parameter ε₁ and thermoelectric coupling parameter ε3 control energy conversion, showing that increasing ε₁ from 0.01 to 0.10 raises temperature by 35% but reduces displacement by 25% through a positive feedback loop (thermal expansion → strain → additional heat → further expansion), while increasing ε3 from 0.01 to 0.10 raises carrier density by 50% through the Seebeck effect driving carrier migration from hot to cold regions, providing design guidelines for optoelectronic devices. Collectively, these contributions establish the most comprehensive analytical model to date for wave propagation in porous semiconductors under realistic operating conditions, with direct applications to solar energy harvesting, power electronics, laser diodes, geothermal energy extraction, and MEMS/NEMS devices. The problem description Consider a homogeneous thermoelastic half-space exhibiting a double porosity structure in its undeformed condition at a uniform temperature. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_{0}$$\end{document}. In the context of double-porosity media, Two distinct void networks coexist within the solid matrix: Pores These are the primary void network, consisting of small, typically spherical or irregular cavities with diameters ranging from nanometers to micrometers. Pores are characterized by low permeability (typically 10-19 to 10-16 m2) but high specific surface area (100–1000 m2/g). They store most of the fluid volume and provide the primary capacity for energy storage. In geological materials, pores correspond to the intergranular spaces between mineral grains. In engineered materials, pores are often intentionally introduced during manufacturing to reduce weight or enhance thermal insulation. Fissures These are the secondary void network, consisting of larger, crack-like or planar voids with lengths much greater than their apertures (aspect ratio typically > 10:1). Fissures have high permeability (10-12 to 10-9 m2) but low storage capacity. They serve as the primary pathways for fluid and energy transport. In natural materials, fissures often result from thermal stresses, tectonic forces, or drying shrinkage. In semiconductors, fissures can be generated during thermal cycling due to mismatch in thermal expansion coefficients between different layers. All the considered functions will depend upon \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(x,z,t)$$\end{document}. We will obtain the displacement vector \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\vec{u}$$\end{document} on the form \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\vec{u} = (u,0,w)$$\end{document}. The governing equations and basic relations for a homogeneous isotropic thermo-elastic solid with a double porosity structure with the influence of gravity in the absence of incremental heat sources, are provided see Fig. 1:Fig. 1 Schematic representation of the physical problem. (a) Half-space geometry occupying the region x3 ≥ 0 with coordinate axes \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(x, y, z).$$\end{document} A harmonic wave propagates in the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x-z$$\end{document} plane (wavy arrow). Gravitational acceleration \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g = 9.81$$\end{document} m/s2 acts downward in the negative \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}-direction. The free surface at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z = 0$$\end{document} is subjected to photothermal excitation (laser illumination) and boundary conditions (mechanical load, thermal insulation, carrier density condition, and equilibrated stress conditions for pores and fissures). (b) Enlarged view of the double-porosity structure showing primary pores (small spherical cavities, labeled \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\phi )$$\end{document} and secondary fissures (elongated crack-like voids, labeled \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document}). Characteristic dimensions: pore diameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${d}_{p} \approx 1-10\upmu \mathrm{m}$$\end{document}, fissure length \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${L}_{f} \approx 100-1000$$\end{document} μm, fissure aperture \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${a}_{f} \approx 0.1-10$$\end{document} μm. Double-headed arrows indicate fluid and energy exchange between the two pore networks. Schematic representation of the physical problem. (a) Half-space geometry occupying the region x3 ≥ 0 with coordinate axes \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(x, y, z).$$\end{document} A harmonic wave propagates in the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x-z$$\end{document} plane (wavy arrow). Gravitational acceleration \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g = 9.81$$\end{document} m/s2 acts downward in the negative \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}-direction. The free surface at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z = 0$$\end{document} is subjected to photothermal excitation (laser illumination) and boundary conditions (mechanical load, thermal insulation, carrier density condition, and equilibrated stress conditions for pores and fissures). (b) Enlarged view of the double-porosity structure showing primary pores (small spherical cavities, labeled \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\phi )$$\end{document} and secondary fissures (elongated crack-like voids, labeled \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document}). Characteristic dimensions: pore diameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${d}_{p} \approx 1-10\upmu \mathrm{m}$$\end{document}, fissure length \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${L}_{f} \approx 100-1000$$\end{document} μm, fissure aperture \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${a}_{f} \approx 0.1-10$$\end{document} μm. Double-headed arrows indicate fluid and energy exchange between the two pore networks. The equation of motion1,25,26,471\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho \ddot{\vec{u}} = \mu \nabla^{2} \vec{u} + \left( {\lambda + \mu } \right)\nabla e + b\nabla \Phi + d\nabla \Psi - \gamma \left( {1 + \nu_{0} \frac{\partial }{\partial t}} \right)\nabla T - \delta_{n} \nabla N + F_{i}$$\end{document} where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$F_{i} = \left( { - \rho g\frac{\partial w}{{\partial x}},0,\rho g\frac{\partial u}{{\partial x}}} \right).$$\end{document} Equations of heat conduction2,3.2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\nabla^{2} T = \left( {n_{1} + n_{0} \tau_{0} \frac{\partial }{\partial t}} \right)(\rho \,{\kern 1pt} c_{e} \dot{T}\, + \gamma_{1} T_{0} \,\dot{\Phi }\, + \gamma_{2} T_{0} \,\dot{\Psi } - \gamma {\kern 1pt} T_{0} \dot{e}\,) - \frac{{E_{g} }}{\tau }N,$$\end{document}the relaxation parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1}$$\end{document}, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{2}$$\end{document} distinguish the three thermoelastic theories. In the CD theory, all relaxation times are zero, reducing Eq. (2) to the classical parabolic heat equation with infinite thermal wave speed. In the L–S theory, a single relaxation time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}>0$$\end{document} is introduced, making the heat equation hyperbolic and yielding a finite thermal wave speed \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{thermal}=\sqrt{K/(\rho {c}_{E}{\tau}_{0})}$$\end{document}. In the G–L theory, two relaxation times \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1}>0$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{2}>0$$\end{document} appear, allowing independent control of temperature and strain rate relaxation. This is particularly important for semiconductors, where phonons (characteristic time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1}\approx {10}^{-12}$$\end{document} s) and electrons (characteristic time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{2}\approx {10}^{-13}$$\end{document} s) have different scattering rates. The coupled plasma, thermal and elastic transport equations can be given below as a vector form as5,48–50 as,3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,\frac{{\partial N(\mathop{r}\limits^{\rightharpoonup} ,t)}}{\partial t} = D_{E} \nabla^{2} N(\mathop{r}\limits^{\rightharpoonup} ,t) - \,\frac{{N(\mathop{r}\limits^{\rightharpoonup} ,t)}}{\tau } + \kappa \;T(\mathop{r}\limits^{\rightharpoonup} ,t),$$\end{document} Equilibrated stress equations of motion20.4\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha \nabla^{2} \Phi + b_{1} \nabla^{2} \Psi - be - \alpha_{1} \Phi - \alpha_{3} \Psi + \gamma_{1} T = K_{1} \ddot{\Phi },$$\end{document}5\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$b_{1} \nabla^{2} \Phi + \gamma_{0} \nabla^{2} \Psi - de - \alpha_{3} \Phi - \alpha_{2} \Psi + \gamma_{2} T = K_{2} \ddot{\Psi }.$$\end{document} Stress equation:6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{ij} = 2\mu e_{ij} + (\lambda e + b\Phi + d\Psi - \gamma \left( {1 + \nu_{0} \frac{\partial }{\partial t}} \right)T - \delta_{n} N)\delta_{ij} .$$\end{document} Equations for double porosity :7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{i} = \alpha \;\Phi_{,i} + b_{1} \;\Psi_{,i} ,$$\end{document}8\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{i} = b_{1} \;\Phi_{,i} + \gamma \;\Psi_{,i} .$$\end{document} Equations (7–8) describe the equilibrated stresses for pores (ϕ) and fissures (ψ), where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\widetilde{\sigma }}_{i}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\widetilde{\zeta }}_{i}$$\end{document} are stress vectors, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\xi}_{1},{\xi}_{2}$$\end{document} represent internal forces from pore-fissure-matrix interactions, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\rho}_{1},{\rho}_{2}$$\end{document} are equilibrated inertias. The double-porosity model assumes two interconnected void networks with different length scales (pores: 1–10 μm, fissures: 100–1000 μm), leading to distinct pressure equilibration times (fissures: milliseconds, pores: seconds to minutes). The coupling coefficients \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1},{b}_{2},{b}_{3}$$\end{document} in the constitutive relations quantify interactions between stress, temperature, and both porosity fields, with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{3}$$\end{document} representing fluid/energy exchange between pores and fissures. Equations (6–13) in 2D form as follows;9\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(\lambda + 2\mu )\frac{{\partial^{2} u}}{{\partial x^{2} }} + (\lambda + \mu )\frac{{\partial^{2} w}}{\partial x\partial z} + \mu \frac{{\partial^{2} u}}{{\partial z^{2} }} + b\frac{\partial \Phi }{{\partial x}} + d\frac{\partial \Psi }{{\partial x}} - \gamma (1 + \nu_{0} \frac{\partial }{\partial t})\frac{\partial T}{{\partial x}}{ - }\,\delta_{n} \frac{\partial N}{{\partial x}} = \rho \left( {\frac{{\partial^{2} u}}{{\partial t^{2} }} + g\frac{\partial w}{{\partial x}}} \right),$$\end{document}10\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(\lambda + 2\mu )\frac{{\partial^{2} w}}{{\partial z^{2} }} + (\lambda + \mu )\frac{{\partial^{2} u}}{\partial x\partial z} + \mu \frac{{\partial^{2} w}}{{\partial x^{2} }} + b\frac{\partial \Phi }{{\partial z}} + d\frac{\partial \Psi }{{\partial z}} - \gamma (1 + \nu_{0} \frac{\partial }{\partial t})\frac{\partial T}{{\partial z}}{ - }\,\delta_{n} \frac{\partial N}{{\partial z}} = \rho \,\left( {\frac{{\partial^{2} w}}{{\partial t^{2} }} - g\frac{\partial u}{{\partial x}}} \right),$$\end{document}11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\nabla^{2} T = (n_{1} + n_{0} \tau_{0} \frac{\partial }{\partial t})(\rho {\kern 1pt} c_{e} \frac{\partial T}{{\partial t}} + \gamma_{1} T_{0} \frac{\partial \Phi }{{\partial t}}\, + \gamma_{2} T_{0} \frac{\partial \Psi }{{\partial t}} - \gamma {\kern 1pt} T_{0} \frac{\partial e}{{\partial t}}) - \frac{{E_{g} }}{\tau }N,$$\end{document}12\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{E} \nabla^{2} N - \frac{N}{\tau } + \kappa \;T = \frac{\partial N}{{\partial t}},$$\end{document}13\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha \nabla^{2} \Phi + b_{1} \nabla^{2} \Psi - b\,e - \alpha_{1} \Phi - \alpha_{3} \Psi + \gamma_{1} T = K_{1} \frac{{\partial^{2} \Phi }}{{\partial t^{2} }},$$\end{document}14\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$b_{1} \nabla^{2} \Phi + \gamma_{0} \nabla^{2} \Psi - de - \alpha_{3} \Phi - \alpha_{2} \Psi + \gamma_{2} T = K_{2} \frac{{\partial^{2} \Psi }}{{\partial t^{2} }},$$\end{document}15\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{xx} = {(2}\mu + \lambda {)}\frac{\partial u}{{\partial x}} + \lambda \;\frac{\partial w}{{\partial z}} + b\Phi + d\Psi - \gamma \left( {1 + \nu_{0} \frac{\partial }{\partial t}} \right)T - \delta_{n} N),$$\end{document}16\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{zz} = {(2}\mu + \lambda {)}\frac{\partial w}{{\partial z}}\, + \lambda \;\frac{\partial u}{{\partial x}} + b\Phi + d\Psi - \gamma \left( {1 + \nu_{0} \frac{\partial }{\partial t}} \right)T - \delta_{n} N),$$\end{document}17\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{xz} = \mu \left( {\frac{\partial u}{{\partial z}} + \,\frac{\partial w}{{\partial x}}\,} \right).$$\end{document} where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$e = \frac{\partial u}{{\partial x}} + \frac{\partial w}{{\partial z}}$$\end{document}. Assuming the scalar potential functions \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Pi (x,\,z,\,t)$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi (x,\,z,\,t)$$\end{document} defined by the relations in the non-dimensional form: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$u = \,\frac{\partial \Pi }{{\partial x}}\,\, + \,\,\,\frac{\partial \,\psi }{{\partial \,z}},{\mathrm{w}} = \,\frac{\partial \Pi }{{\partial {\mathrm{z}}}}\,\, - \,\,\frac{\partial \,\psi }{{\partial \,x}}$$\end{document}. For simplicity, we introduce dimensionless variables. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(x^{\prime},\,z^{\prime},u^{\prime},w^{\prime}) = \frac{{\omega_{1} }}{{c_{1} }}(x,\,z,u,w),$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\{ }\sigma^{\prime}_{1} ,\tau^{\prime}_{1} {\} } = \frac{{c_{1} }}{{\alpha \omega_{1} }}{\{ }\sigma_{1} ,\tau_{1} {\} },$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${(}t^{\prime},\tau^{\prime}_{0} {,}\upsilon_{0}^{\prime } ) = \omega_{1} (t,\tau_{0} ,\upsilon_{0} ),$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma ^{\prime}_{{{\mathrm{ij}}}} = \left( {\frac{1}{\mu }} \right)\sigma_{{{\mathrm{ij}}}}$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(\Pi^{\prime},\psi^{\prime}) = \frac{(\Pi ,\psi )}{{(C_{T} t^{*} )^{2} }}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$[\Phi^{\prime},\Psi^{\prime}] = \frac{{K_{1} \omega_{1}^{2} }}{{\alpha_{1} }}[\Phi ,\Psi ]$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$c_{1}^{2} = \frac{{\lambda { + 2}\mu }}{\rho }$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$c_{2}^{2} = \frac{\mu }{\rho }$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\beta = \frac{{c_{1}^{2} }}{{c_{2}^{2} }}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\gamma = (3\lambda + 2\mu )\alpha_{t}$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\omega_{1} = \frac{{\rho c_{e} c_{1}^{2} }}{k}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g^{\prime} = \frac{{t^{*} }}{{C_{T} }}g$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {N^{\prime},T^{\prime}} \right) = \left( {\frac{{\delta_{n} N,\gamma T}}{\lambda + 2\mu }} \right).$$\end{document} Using the above dimensionless quantities, Eqs. (9–17) become:18\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {\nabla^{2} - \frac{{\partial^{2} }}{{\partial t^{2} }}} \right)\Pi + g\frac{\partial \psi }{{\partial x}} + a_{1} \Phi + a_{2} \Psi - (1 + \nu_{0} \frac{\partial }{\partial t})T{ - }N\, = 0,$$\end{document}19\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\nabla^{2} T - \,(n_{1} + n_{0} \tau_{0} \frac{\partial }{\partial t})\frac{\partial T}{{\partial t}} - (n_{1} + n_{0} \tau_{0} \frac{\partial }{\partial t})\left( {a_{3} \frac{\partial \Phi }{{\partial t}}\, + a_{4} \frac{\partial \Psi }{{\partial t}} - \,\varepsilon_{1} \,\frac{\partial }{\partial t}\nabla^{2} \Pi } \right) + \varepsilon_{2} N\, = 0,$$\end{document}20\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,(\nabla^{2} - a_{5} - a_{6} \frac{\partial }{\partial t})N + \varepsilon_{3} \,T = 0,$$\end{document}21\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {a_{7} \nabla^{2} - a_{8} - \frac{{\partial^{2} }}{{\partial t^{2} }}} \right)\Phi + \left( {a_{9} \nabla^{2} - a_{10} } \right)\Psi - a_{11} \nabla^{2} \Pi + a_{12} T = 0,$$\end{document}22\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {a_{13} \nabla^{2} - a_{14} } \right)\Phi + \left( {a_{15} \nabla^{2} - a_{16} - \frac{{\partial^{2} }}{{\partial t^{2} }}} \right)\Psi - a_{17} \,\nabla^{2} \Pi + a_{18} T = 0,$$\end{document}23\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {\nabla^{2} - a_{19} \frac{{\partial^{2} }}{{\partial t^{2} }}} \right)\psi - g\frac{\partial \Pi }{{\partial x}} = 0,$$\end{document}24\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upsigma}_{{{\mathrm{xx}}}} = a_{19} \frac{{\partial^{2} \Pi }}{{\partial x^{2} }} + a_{22} \;\frac{{\partial^{2} \Pi }}{{\partial z^{2} }} + 2\frac{{\partial^{2} \psi }}{\partial x\partial z} - a_{19} \left( {\left( {1 + \nu_{0} \frac{\partial }{\partial t}} \right)T\, + N} \right) + a_{20} \Phi \; + \,a_{21} \,\Psi ,$$\end{document}25\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upsigma}_{{{\mathrm{zz}}}} = a_{19} \frac{{\partial^{2} \Pi }}{{\partial z^{2} }} + a_{22} \;\frac{{\partial^{2} \Pi }}{{\partial x^{2} }} - 2\frac{{\partial^{2} \psi }}{\partial x\partial z} - a_{19} \left( {\left( {1 + \nu_{0} \frac{\partial }{\partial t}} \right)T\, + N} \right) + a_{20} \Phi \; + \,a_{21} \,\Psi ,,$$\end{document}26\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upsigma}_{{{\mathrm{xz}}}} = \;\frac{{\partial^{2} \psi }}{{\partial z^{2} }} + 2\frac{{\partial^{2} \Pi }}{\partial x\partial z} - \frac{{\partial^{2} \psi }}{{\partial x^{2} }}.$$\end{document} Dimensionless variables for the components of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{i}$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{i}$$\end{document}.27\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{1} = \eta_{1} \Phi_{,x} + \eta_{2} \Psi_{,x} ,$$\end{document}28\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{1} = \eta_{2} \Phi_{,x} + \eta_{3} \Psi_{,x} .$$\end{document} where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{1} = \frac{{b\alpha_{1} }}{{\rho c_{1}^{2} K_{1} \omega_{1}^{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{2} = \frac{{d\alpha_{1} }}{{\rho c_{1}^{2} K_{1} \omega_{1}^{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{3} = \frac{{\gamma \,\gamma_{1} T_{0} \alpha_{1} }}{{\rho K_{1} K^{ * } \omega_{1}^{3} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{4} = \frac{{\gamma \,\gamma_{2} T_{0} \alpha_{1} }}{{\rho K_{1} K^{ * } \omega_{1}^{3} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,a_{5} = \frac{{k\,t^{*} }}{{D_{E} \rho \tau c_{e} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,a_{6} = \frac{k}{{D_{E} \rho c_{e} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{7} = \frac{\alpha }{{c_{1}^{2} K_{1} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{8} = \frac{{\alpha_{1} }}{{K_{1} w_{1}^{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{9} = \frac{{b_{1} }}{{c_{1}^{2} K_{1} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{10} = \frac{{\alpha_{3} }}{{K_{1} \omega_{1}^{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{11} = \frac{b}{{\alpha_{1} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{12} = \frac{{\gamma_{1} T_{0} }}{{\alpha_{1} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{13} = \frac{{b_{1} }}{{c_{1}^{2} K_{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{14} = \frac{{\alpha_{3} }}{{\omega_{1}^{2} K_{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{15} = \frac{{\gamma_{0} }}{{c_{1}^{2} K_{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{16} = \frac{{\alpha_{2} }}{{\omega_{1}^{2} K_{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{17} = \frac{{dK_{1} }}{{\alpha_{1} K_{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{18} = \frac{{\gamma_{2} T_{0} K_{1} }}{{\alpha_{1} K_{2} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{19} = \frac{\lambda + 2\mu }{\mu },$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{20} = \frac{{b\alpha_{1} }}{{K_{1} \omega_{1}^{2} \mu_{0} }},a_{21} = \frac{{d\alpha_{1} }}{{K_{1} \omega_{1}^{2} \mu }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{22} = \frac{\lambda }{\mu },\beta = \frac{{a\,c_{1}^{2} }}{{\omega_{1}^{2} }},\eta_{1} = \frac{{\alpha_{1} }}{{k_{1} \omega_{1}^{2} }}$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\eta_{2} = \frac{{b_{1} \alpha_{1} }}{{\alpha k_{1} \omega_{1}^{2} }}$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\eta_{3} = \frac{{\gamma_{0} \alpha_{1} }}{{\alpha k_{1} \omega_{1}^{2} }}$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,\varepsilon_{1} = \frac{{\gamma^{2} T_{0} }}{{K^{ * } \rho \omega_{1} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,\varepsilon_{2} = \frac{{\alpha_{T} E_{g} }}{{d_{n} \rho \tau c^{ * } \omega_{1} }},$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,\varepsilon_{3} = \frac{{d_{n} k\kappa }}{{\alpha_{T} \rho c_{e} D_{E} \omega_{1} }}.$$\end{document} where, the parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,\varepsilon_{1}$$\end{document} , \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,\varepsilon_{2}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,\varepsilon_{3}$$\end{document} can be called the thermoelastic, the thermo-energy, and the thermoelectric coupling parameters, respectively. Harmonic wave analysis The solution of the physical quantities, when a harmonic wave propagates in the direction, lies in the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$xz$$\end{document}-plane, can be decomposed in terms of the following form4,6,51:29\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Xi (x,z,t) = \Xi^{*} (x)\,\exp (\omega t + i\ell z).$$\end{document} Where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\omega$$\end{document} is the angular frequency or complex time constant, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$i$$\end{document} is the imaginary value, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\ell$$\end{document} is a wave number in the direction of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}-axis, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Xi^{*} (x)$$\end{document} is the amplitude of given function. By using the normal mode defined in Eq. (29), Eqs. (18–28), we arrive at a system of five non-homogeneous equations:30\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {D^{2} - g_{1} } \right)\Pi^{ * } + gD\psi^{*} + a_{1} \Phi^{ * } + a_{2} \Psi^{ * } - f_{1} T^{ * } { - }N^{ * } \, = 0,$$\end{document}31\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {D^{2} - f_{2} } \right)T^{ * } + g_{3} \Phi^{ * } + g_{4} \Psi^{ * } + g_{5} \,\left( {D^{2} - \ell^{2} } \right)\Pi^{ * } + \varepsilon_{2} N^{ * } = 0,$$\end{document}32\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,(D^{2} - g_{6} )N^{ * } + \varepsilon_{3} \,T^{ * } = 0,$$\end{document}33\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {a_{7} D^{2} - g_{7} } \right)\Phi^{ * } + \left( {a_{9} D^{2} - g_{8} } \right)\Psi^{ * } - \left( {a_{11} D^{2} - g_{9} } \right)\Pi^{ * } + a_{12} T^{ * } = 0,$$\end{document}34\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {a_{13} D^{2} - g_{10} } \right)\Phi^{ * } + \left( {a_{15} D^{2} - g_{11} } \right)\Psi^{ * } - \left( {a_{17} D^{2} - g_{12} } \right)\Pi^{ * } + a_{18} T^{ * } = 0,$$\end{document}35\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {D^{2} - g_{13} } \right)\psi^{ * } - gD\Pi^{*} = 0,$$\end{document}36\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upsigma }^{ * }_{{{\mathrm{xx}}}} = \left( {a_{19} D^{2} - a_{22} \ell^{2} \;} \right)\Pi^{ * } + 2i\ell D\psi^{ * } - a_{19} (f_{1} T^{ * } \, + N^{ * } ) + a_{20} \Phi^{ * } \; + \,a_{21} \,\Psi^{ * } ,$$\end{document}37\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upsigma}_{{{\mathrm{zz}}}} = \left( {a_{22} \;D^{2} - a_{19} \ell^{2} } \right)\Pi^{ * } - 2i\ell D\psi^{ * } - a_{19} (f_{1} \,T^{ * } \, + N^{ * } ) + a_{20} \Phi^{ * } \; + \,a_{21} \,\Psi^{ * } ,$$\end{document}38\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upsigma }^{ * }_{{{\mathrm{xz}}}} = \; - \left( {\ell^{2} + D^{2} } \right)\psi^{ * } + 2i\ell D\Pi^{ * } ,$$\end{document}39\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{1} = \eta_{1} D\Phi^{ * } + \eta_{2} D\Psi^{ * } ,$$\end{document}40\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau^{ * }_{1} = \eta_{2} D\Phi^{ * } + \eta_{3} D\Psi^{ * } .$$\end{document} where,\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D = \frac{\partial }{\partial x},g_{1} = \ell^{2} + \omega^{2} ,g_{2} = (n_{1} + n_{0} \tau_{0} \omega ),g_{3} = - a_{3} g_{2} ,g_{4} = - a_{4} g_{2} ,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{gathered} g_{5} = - \varepsilon_{1} g_{2} ,g_{6} = \ell^{2} + a_{5} + a_{6} \omega ,g_{7} = a_{7} \ell^{2} + a_{8} + \omega^{2} ,g_{8} = a_{9} \ell^{2} + a_{10} ,g_{9} = a_{11} \ell^{2} ,g_{10} = a_{13} \ell^{2} + a_{14} , \hfill \\ g_{11} = a_{15} \ell^{2} + a_{16} + \omega^{2} ,g_{12} = a_{17} \ell^{2} ,g_{13} = \ell^{2} + a_{19} \omega^{2} ,f_{1} = 1 + \nu_{0} \omega ,f_{2} = \omega g_{2} + \ell^{2} \hfill \\ \end{gathered}$$\end{document}. The above equations are the field equations of the generalized thermo-elasticity elastic solid, applicable to the (LS) theory, the (GL) theory, as well as the classical coupled theory (CD), as follows: 1. The equations of the coupled thermo- elasticity (CD) theory, when \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{n}}_{{0}} = 0,\,\,\,\,\,\,{\mathrm{n}}_{{1}} = {1,}\quad {\uptau}_{0} = \nu_{{0}} = {0}$$\end{document}. 2.Lord–Shulman (LS) theory, when \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{n}}_{{1}} = {\mathrm{n}}_{{0}} = {1,}\quad {\upnu}_{{0}} = {0,}\quad {\uptau}_{{0}} > {0}$$\end{document}. 3.Green–Lindsay (GL) theory, when \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\, \quad {\mathrm{n}}_{{1}} = {1,}\quad \;{\mathrm{n}}_{{0}} = 0\quad \;,\quad \nu_{0} \ge \;{\uptau}_{{0}} > {0}$$\end{document} . Eliminating \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T^{ * } ,N^{ * } ,\Phi^{ * } ,\Psi^{ * }$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Pi^{ * }$$\end{document} between Eqs. (35–39) yields:41\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(D^{12} - \Delta_{1} D^{10} + \Delta_{2} D^{8} - \Delta_{3} D^{6} + \Delta_{4} D^{4} - \Delta_{5} D^{2} + \Delta_{6} )\left\{ {T^{ * } ,N^{ * } ,\Phi^{ * } ,\Psi^{ * } ,\Pi^{ * } ,\psi^{ * } ,\sigma_{ij}^{ * } ,\sigma^{ * }_{1} ,\tau^{ * }_{1} } \right\}(x) = 0.$$\end{document} The coefficients \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta_{i} ,i = 1....6$$\end{document} are in Appendix A. The factorization method was used to remedy the principal ordinary differential equation (ODE) (41) as follows:42\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\prod\limits_{n = 1}^{6} {\left( {D^{2} - m_{n}^{2} } \right)\left\{ {T^{ * } ,N^{ * } ,\Phi^{ * } ,\Psi^{ * } ,\Pi^{ * } ,\psi^{ * } ,\sigma_{ij}^{ * } ,\sigma^{ * }_{1} ,\tau^{ * }_{1} } \right\}(x)\,e^{(\omega t + i\ell z)} } = 0.$$\end{document} Where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$m_{n}^{2} (n = 1,2,3,4,5,6)$$\end{document} represent the roots that may be taken in the positive real part \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x \to \infty$$\end{document}. The solution of equation (ODE) (42) takes the following form (according to the linearity of the problem) :43\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,T^{ * } (x) = \sum\limits_{n = 1}^{6} {D_{n} } (\ell ,\omega )\,e^{{ - m_{n} x}} .$$\end{document} In the same way, the solutions of the other quantities can be expressed as:44\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N^{ * } (x) = \sum\limits_{n = 1}^{6} {D^{\prime}_{n} } (\ell ,\omega )\,e^{{ - m_{n} x}} = \sum\limits_{n = 1}^{6} {H_{1n} D_{n} (\ell ,\omega )} \,e^{{ - m_{n} x}} ,$$\end{document}45\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Pi^{ * } (x) = \sum\limits_{n = 1}^{6} {D_{n}^{\prime \prime } } (\ell ,\omega )\,\exp ( - m_{n} x) = \sum\limits_{n = 1}^{6} {H_{2n} \,D_{n} } (\ell ,\omega )\,\exp ( - m_{n} x)$$\end{document}46\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Phi^{ * } (x) = \sum\limits_{n = 1}^{6} {D^{\prime\prime\prime}_{n} \,} (\ell ,\omega )\,\exp ( - m_{n} x) = \sum\limits_{n = 1}^{6} {H_{3n} \,D_{n} } (\ell ,\omega )\,\exp ( - m_{n} x),$$\end{document}47\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Psi^{ * } (x) = \sum\limits_{n = 1}^{6} {D_{n}^{(4)} (\ell ,\omega )} \,\exp ( - m_{n} x) = \sum\limits_{n = 1}^{6} {H_{4n} \,D_{n} } (\ell ,\omega )\,\exp ( - m_{n} x),$$\end{document}48\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi^{ * } (x) = \sum\limits_{n = 1}^{6} {D_{n}^{(5)} (\ell ,\omega )} \,\exp ( - m_{n} x) = \sum\limits_{n = 1}^{6} {H_{5n} \,D_{n} } (\ell ,\omega )\,\exp ( - m_{n} x).$$\end{document} To obtain stress components, the displacement components can be written. Firstly, in terms of parameters:49\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{Since}}\,u^{ * } (x) = D\Pi^{ * } + i\,\ell {\kern 1pt} \psi^{ * } ,$$\end{document}50\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$w^{ * } (x) = i\,\ell {\kern 1pt} {\kern 1pt} \Pi^{ * } - D\,\psi^{ * } .$$\end{document} Then,51\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$u^{ * } (x) = - \sum\limits_{n = 1}^{5} {D^{\prime\prime}_{n} } (\ell ,\omega )\,m_{n} e^{{ - m_{n} x}} + i\ell \sum\limits_{n = 1}^{6} {D_{n}^{(5)} (\ell ,\omega )} \,\exp ( - m_{n} x),$$\end{document}52\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$w^{ * } (x) = i\ell (\sum\limits_{n = 1}^{6} {D^{\prime\prime}_{n} } (\ell ,\omega )\,e^{{ - m_{n} x}} ) + \sum\limits_{n = 1}^{6} {D_{n}^{(5)} (\ell ,\omega )} \,m_{n} \exp ( - m_{n} x),$$\end{document}53\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{xx} = \sum\limits_{n = 1}^{6} {H_{6n} \,D_{n} } (\ell ,\omega )\,\exp ( - m_{n} x),$$\end{document}54\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{zz} = \sum\limits_{n = 1}^{6} {H_{7n} \,D_{n} } (\ell ,\omega )\,\exp ( - m_{n} x),$$\end{document}55\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{xz} = \sum\limits_{n = 1}^{6} {H_{8n} D_{n} } (\ell ,\omega )\,\exp ( - m_{n} x).$$\end{document} To get the solution \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{1}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{1}$$\end{document} substitute from Eqs. (45), (46) in (39) and (40) we get:56\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{1} = \sum\limits_{n = 1}^{6} {H_{9n} D_{n} e^{{ - m_{n} x}} },$$\end{document}57\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau^{ * }_{1} = \sum\limits_{n = 1}^{6} {H_{10n} D_{n} e^{{ - m_{n} x}} } .$$\end{document}where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{n} ,D^{\prime}_{n} ,D^{\prime\prime}_{n} \,\,,D^{\prime\prime\prime}_{n} \,,\,D_{n}^{(4)}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{n}^{(5)} ,n = 1,2,3,4,5,6$$\end{document} are unknown parameters depending on the parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\ell ,\omega$$\end{document}. The relationship between the unknown parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{n} ,D^{\prime}_{n} ,D^{\prime\prime}_{n} \,\,,D^{\prime\prime\prime}_{n} \,,\,D_{n}^{(4)}$$\end{document} ,and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{n}^{(5)} ,n = 1,2,3,4,5,6$$\end{document} can be obtained when using the main Eqs. (30–39) and (40), which take the following relationship:\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} H_{{1n}} & = - \frac{{\varepsilon _{3} }}{{m_{n} ^{2} - g_{6} }}, \\ H_{{2n}} & = \frac{\begin{gathered} \left( {g_{4} \left( {a_{7} m_{n} ^{2} - g_{7} } \right) - g_{3} \left( {a_{9} m_{n} ^{2} - g_{8} } \right)} \right) \hfill \\ \left( \begin{gathered} a_{2} \left( {m_{n} ^{2} - g_{{13}} } \right)\left( {\left( {m_{n} ^{2} - f_{2} } \right) + H_{{1n}} \epsilon_{2} } \right) \hfill \\ - g_{4} \left( {m_{n} ^{2} - g_{{13}} } \right)\left( { - f_{1} - H_{{1n}} } \right) \hfill \\ \end{gathered} \right) \hfill \\ - \left( {a_{2} g_{3} \left( {m_{n} ^{2} - g_{{13}} } \right) - a_{1} g_{4} \left( {m_{n} ^{2} - g_{{13}} } \right)} \right) \hfill \\ \left( {a_{{12}} g_{4} - \left( {a_{9} m_{n} ^{2} - g_{8} } \right)\left( {\left( {m_{n} ^{2} - f_{2} } \right) + H_{{1n}} \epsilon_{2} } \right)} \right) \hfill \\ \end{gathered} }{\begin{gathered} \left( {g_{4} \left( {a_{7} m_{n} ^{2} - g_{7} } \right) - g_{3} \left( {a_{9} m_{n} ^{2} - g_{8} } \right)} \right) \hfill \\ \left( \begin{gathered} a_{2} g_{5} \left( {m_{n} ^{2} - g_{{13}} } \right)\left( {m_{n} ^{2} - l^{2} } \right) \hfill \\ + g_{4} \left( { - m_{n} ^{2} g^{2} - \left( {m_{n} ^{2} - g_{1} } \right)\left( {m_{n} ^{2} - g_{{13}} } \right)} \right) \hfill \\ \end{gathered} \right) \hfill \\ - \left( {a_{2} g_{3} \left( {m_{n} ^{2} - g_{{13}} } \right) - a_{1} g_{4} \left( {m_{n} ^{2} - g_{{13}} } \right)} \right) \hfill \\ \left( {g_{4} \left( {g_{9} - a_{{11}} m_{n} ^{2} } \right) - g_{5} \left( {m_{n} ^{2} - l^{2} } \right)\left( {a_{9} m_{n} ^{2} - g_{8} } \right)} \right) \hfill \\ \end{gathered} }, \\ \end{aligned}$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} H_{{3n}} & = - \frac{\begin{gathered} g_{4} \left( {a_{{12}} - H_{{2n}} \left( {m_{n} ^{2} a_{{11}} - g_{9} } \right)} \right) - \left( {m_{n} ^{2} a_{9} - g_{8} } \right) \hfill \\ \left( {\left( {m_{n} ^{2} - f_{2} } \right) + \left( {m_{n} ^{2} - l^{2} } \right)H_{{2n}} g_{5} + H_{{1n}} \epsilon_{2} } \right) \hfill \\ \end{gathered} }{{g_{4} \left( {m_{n} ^{2} a_{7} - g_{7} } \right) - g_{3} \left( {m_{n} ^{2} a_{9} - g_{8} } \right)}}, \\ H_{{4n}} & = \frac{{ - m_{n} ^{2} H_{{3n}} a_{7} + m_{n} ^{2} H_{{2n}} a_{{11}} - a_{{12}} + H_{{3n}} g_{7} - H_{{2n}} g_{9} }}{{m_{n} ^{2} a_{9} - g_{8} }}, \\ H_{{5n}} & = \frac{{m_{n} gH_{{2n}} }}{{m_{n} ^{2} - g_{{13}} }}, \\ H_{{6n}} & = \left( {a_{{19}} m_{n}^{2} - a_{{22}} \ell ^{2} } \right)H_{{2n}} - a_{{19}} f_{1} \left( {(\,1 + H_{{1n}} )} \right) \\ & \quad + a_{{20}} H_{{3n}} + a_{{21}} H_{{4n}} - 2I\ell m_{n} H_{{5n}} , \\ H_{{7n}} & = \left( {a_{{22}} m_{n}^{2} - a_{{19}} \ell ^{2} } \right)H_{{2n}} - a_{{19}} f_{1} \left( {(\,1 + H_{{1n}} )} \right) \\ & \quad + a_{{20}} H_{{3n}} + a_{{21}} H_{{4n}} + 2I\ell m_{n} H_{{5n}} , \\ H_{{8n}} & = - 2I\,\ell \,m_{n} \,H_{{2n}} - (m_{n}^{2} + \ell ^{2} )H_{{5n}} , \\ H_{{9n}} & = ( - \eta_{1} m_{n} H_{{3n}} - \eta_{2} m_{n} H_{{4n}} ), \\ H_{{10n}} & = ( - \;\eta_{2} m_{n} H_{{3n}} - \eta_{3} m_{n} H_{{4n}} ). \\ \end{aligned}$$\end{document} Applications In this section, we ascertain the parameters… We must mitigate the unbounded positive exponentials at infinity in the physical problem. The constants \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{1} ,\,\,D_{2} ,\,\,D_{3} ,\,D_{4} ,D_{5} ,D_{6}$$\end{document} have to be chosen such that the boundary conditions on the surface \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,x = 0$$\end{document}(suppose the boundary \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,x = 0$$\end{document} is adjacent to the vacuum) take the form: (i) Mechanical boundary condition wherein the surface of the half-space experiences a traction load.58\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{xx} (0,\,z,\,t) = \,\, - p_{1} \exp (\omega t + i\ell z)$$\end{document}(ii) The tangential stress boundary condition that the surface of the half-space is traction-free59\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{xz} (0,z,t) = 0.$$\end{document}(iii) Assuming that the boundary \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\,x = 0$$\end{document} is thermally insulated, we have60\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T^{ * } (0,z,t) = P_{2} e^{(\omega t + i\ell z)} .$$\end{document}(vi) Throughout the diffusion process, the carriers may arrive at the sample surface with a non-zero probability of recombination. The boundary condition for the carrier density is delineated as follows.:61\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N^{ * } (0,z,t) = n_{0} e^{(\omega t + i\ell z)} .$$\end{document}(vii) The two equilibrated stress boundary conditions at the free surface \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x = 0$$\end{document} when62\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma^{ * }_{1} (0,z,t) = 0\,\,\,,\,\,\,\,\,\,\tau^{ * }_{1} (0,z,t) = 0.$$\end{document} Applying Eqs. (58–62) in (43), (44), (53), (55),(56) and (62) we get63\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sum\limits_{n = 1}^{6} {H_{6n} D_{n} } = P_{1},$$\end{document}64\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sum\limits_{n = 1}^{6} {\,H_{8n} D_{n} } = 0,$$\end{document}65\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sum\limits_{n = 1}^{10} {D_{n} } = P_{2},$$\end{document}66\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sum\limits_{n = 1}^{6} {H_{1n} D_{n} } = n_{0},$$\end{document}67\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sum\limits_{n = 1}^{6} {D_{10n} D_{n} } = 0 ,$$\end{document}68\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sum\limits_{n = 1}^{6} {H_{9n} D_{n} } = 0 .$$\end{document} To get \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{1} ,D_{2} ,.....,D_{5} ,D_{6}$$\end{document}, we can put Eqs. (63–68) in the matrix69\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {\begin{array}{*{20}c} {D_{1} } \\ {D_{2} } \\ {D_{3} } \\ {D_{4} } \\ {D_{5} } \\ {D_{6} } \\ \end{array} } \right) = \left( {\begin{array}{*{20}c} {H_{61} } & {H_{62} } & {H_{63} } & {H_{64} } & {H_{65} } & {H_{66} } \\ {H_{81} } & {H_{82} } & {H_{83} } & {H_{84} } & {H_{85} } & {H_{86} } \\ {H_{11} } & {H_{12} } & {H_{13} } & {H_{14} } & {H_{15} } & {H_{16} } \\ {H_{101} } & {H_{102} } & {H_{103} } & {H_{104} } & {H_{105} } & {H_{106} } \\ {H_{81} } & {H_{82} } & {H_{83} } & {H_{84} } & {H_{85} } & {H_{86} } \\ 1 & 1 & 1 & 1 & 1 & 1 \\ \end{array} } \right)^{ - 1} .\left( {\begin{array}{*{20}c} {p_{1} } \\ 0 \\ {n_{0} } \\ 0 \\ 0 \\ {p_{2} } \\ \end{array} } \right) .$$\end{document} Numerical results and discussions In this section, the numerical outcomes of the formulated problem are presented and analyzed to elucidate the influence of photothermal excitation, double porosity, gravitational field, and various coupling parameters on the thermoelastic response of the semiconductor medium. The computations were carried out using MATHEMATICA, and the results are displayed in both two-dimensional and three-dimensional graphical forms. All quantities were evaluated in the S.I. system of units, and the material parameters correspond to silicon semiconductor, which is widely used in microelectronic and photothermal devices owing to its stable thermo-mechanical behavior52–56. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\lambda = 6.4 \times 10^{10} N.M^{ - 2} ,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mu = 6.5 \times 10^{10} N.m^{ - 2} ,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$K = 3.86\; \times 10^{3} N.s^{{ - {1}}} .K^{{ - {1}}}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a = 2.5,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\omega = - 1,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha_{t} = 4.14{\mathrm{x}}\,10^{ - 6} K^{{ - {1}}} ,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho = 2330\;Kg.m^{ - 3}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C^{*} = 695\;\;J.Kg^{ - 1} K^{ - 1}$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_{0} = 800K$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{0} = 0.7,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x = 0.5,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\xi = - 1,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{1} = 1 \times 10^{ - 2} ,\quad p_{2} = 2 \times 10^{ - 2} ,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau \, = 5{\mathrm{x}}\,10^{ - 5}$$\end{document} , \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$d_{n} \, = - 9\,{\mathrm{x}}\,10^{ - 31}$$\end{document} , \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D_{E} \, = 2.5 \times 10^{ - 3}$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_{g} \; = 1.11$$\end{document},\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t = 0.2$$\end{document}. Following Khalili57,58, the double porous parameters are taken as,\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha = 1.3 \times 10^{ - 5} N, b_{1} = 0.12 \times 10^{ - 5} N, \gamma = 1.1 \times 10^{ - 5} N.m^{ - 2} , \gamma_{1} = 0.16 \times 10^{5} N.m^{ - 2} , \gamma_{2} = 0.219 \times 10^{5} N.m^{ - 2} ,$$\end{document}\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$d = 0.1 \times 10^{10} N.m^{ - 2} , b = 0.9 \times 10^{10} N.m^{ - 2} , K_{2} = 0.1546 \times 10^{ - 12} N.m^{ - 2} , K_{1} = 0.1456 \times 10^{ - 12} N.m^{ - 2} .$$\end{document}where,\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\omega = \omega_{0} + i\xi$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$i$$\end{document}(\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$i = \sqrt { - 1}$$\end{document}) is the imaginary unit, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$e^{\omega t} = e^{{\omega_{0} t}} (\cos \xi t + i\sin \xi t)$$\end{document} and we can put \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\omega = \omega_{0}$$\end{document}(real)if the time is small. Temporal evolution Figure 2 shows the variation of temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$u_{3}$$\end{document}, carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and stress σ33 with distance \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} at three different times \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(t = 0.1, 0.2, 0.3)$$\end{document} under the L–S theory with double porosity and gravity. Early (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t = 0.1$$\end{document}), the temperature profile exhibits a sharp peak near the surface because photothermal excitation deposits energy within a shallow penetration depth (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$1-10$$\end{document} μm for silicon). As time increases to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t = 0.2$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t = 0.3$$\end{document}, the peak broadens and shifts inward due to thermal diffusion (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =\frac{K}{\rho {c}_{E}} = 9.2\times 10^{-5} \mathrm{m}^{2}/\mathrm{s}$$\end{document}), while the amplitude decreases by approximately 40% because energy dissipates into the double-porosity network through fluid exchange between pores and fissures. The displacement field shows a delayed response \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$at t = 0.1;$$\end{document} the maximum displacement is only 0.18, growing to 0.45 by \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t = 0.3$$\end{document} because elastic waves propagate at finite speed (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{elastic} = \surd (\mu /\rho ) \approx \mathrm{5,240} \mathrm{m}/\mathrm{s}$$\end{document} in silicon), requiring approximately 1.9 × 10-8 s to travel 0.1 mm. The carrier density exhibits oscillatory decay with distance due to the interference between plasma waves (wave number \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{plasma} = \surd (\frac{i\omega }{{D}_{n}})$$\end{document}) and thermal waves, creating a beating pattern when their wave numbers are comparable. The stress field follows the temperature distribution closely because thermal expansion is the primary stress source, with amplitude decreasing from \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0.55 to 0.30$$\end{document} as heat dissipates. These results confirm that the L–S theory correctly captures finite-speed wave propagation and that double porosity introduces additional energy dissipation mechanisms.Fig. 2 Temporal evolution of (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} at three different times: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document} (solid red), \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.2$$\end{document} (dashed blue), and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.3$$\end{document} (dotted green). Results are computed under the Lord–Shulman (L–S) theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}=0.02$$\end{document}) with double porosity parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}, and gravity \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}. Material parameters correspond to silicon. Key observations: At early time (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}), a sharp temperature peak (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.65$$\end{document}) occurs near the surface (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z=0$$\end{document}). As time increases to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.3$$\end{document}, the peak broadens due to thermal diffusion (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =9.2\times {10}^{-5}\hspace{0.17em}{m}^{2}/s$$\end{document}) and its amplitude decreases by approximately 40% due to energy dissipation into the double-porosity network. Displacement shows a delayed response: maximum \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document} increases from 0.18 at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document} to 0.45 at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.3$$\end{document}, reflecting finite elastic wave speed (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{elastic}\approx \mathrm{5,240}\hspace{0.17em}m/s$$\end{document} in silicon). Carrier density exhibits oscillatory decay due to interference between plasma waves (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{plasma}=\sqrt{i\omega /{D}_{n}}$$\end{document}) and thermal waves. Stress follows temperature closely, decreasing from approximately 0.55 to 0.30. Scientific significance: These results confirm that the L–S theory captures finite-speed wave propagation and that double porosity introduces significant energy dissipation, which is beneficial for vibration damping applications. Temporal evolution of (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} at three different times: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document} (solid red), \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.2$$\end{document} (dashed blue), and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.3$$\end{document} (dotted green). Results are computed under the Lord–Shulman (L–S) theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}=0.02$$\end{document}) with double porosity parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}, and gravity \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}. Material parameters correspond to silicon. Key observations: At early time (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}), a sharp temperature peak (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.65$$\end{document}) occurs near the surface (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z=0$$\end{document}). As time increases to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.3$$\end{document}, the peak broadens due to thermal diffusion (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =9.2\times {10}^{-5}\hspace{0.17em}{m}^{2}/s$$\end{document}) and its amplitude decreases by approximately 40% due to energy dissipation into the double-porosity network. Displacement shows a delayed response: maximum \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document} increases from 0.18 at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document} to 0.45 at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.3$$\end{document}, reflecting finite elastic wave speed (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{elastic}\approx \mathrm{5,240}\hspace{0.17em}m/s$$\end{document} in silicon). Carrier density exhibits oscillatory decay due to interference between plasma waves (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{plasma}=\sqrt{i\omega /{D}_{n}}$$\end{document}) and thermal waves. Stress follows temperature closely, decreasing from approximately 0.55 to 0.30. Scientific significance: These results confirm that the L–S theory captures finite-speed wave propagation and that double porosity introduces significant energy dissipation, which is beneficial for vibration damping applications. Effect of thermoelastic coupling parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\boldsymbol{\varepsilon}}_{1}$$\end{document} Figure 3 presents the variation of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T, u_{3}, N, and {\sigma}_{zz}$$\end{document} with distance for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{1} = 0.01, 0.05, and 0.10$$\end{document} under L–S theory with double porosity and gravity. The thermoelastic coupling parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{1} = \gamma^{2} T_{0}/(\rho {c}_{E}\mu )$$\end{document} represents the efficiency of converting mechanical strain energy into thermal energy physically. When the material deforms, the volumetric strain \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\nabla \cdot u$$\end{document} generates heat through the term \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{1}\nabla \cdot u$$\end{document} in the heat equation, creating a positive feedback loop. As \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{1}$$\end{document} increases from 0.01 to 0.10, the peak temperature increases by approximately 35% (from 0.55 to 0.74) because each increment of thermal expansion produces additional heat, which causes further expansion. Counterintuitively, displacement decreases by 25% (from 0.22 to 0.165) because mechanical energy is converted into heat rather than appearing as motion, analogous to viscous damping. Carrier density increases with ε₁ because higher temperatures enhance carrier generation exponentially through the factor \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$exp(-{E}_{g}/{k}_{B} T),$$\end{document} where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${E}_{g} = 1.12$$\end{document} eV is the silicon bandgap. Stress increases by 40% because, although strain decreases, the temperature effect dominates in the stress constitutive law \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}= \left(\lambda + 2\mu \right) \partial u_{3}/\partial z - \gamma \theta$$\end{document}. These findings are consistent with Lotfy et al.33, who reported similar trends in semiconductor materials, and suggest that moderate \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{1} (\approx 0.05)$$\end{document} provides the best balance for energy harvesting applications.Fig. 3 Effect of the thermoelastic coupling parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} on (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Three values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} are compared: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}=0.01$$\end{document} (solid red, weak coupling), \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}=0.05$$\end{document} (dashed blue, moderate coupling), and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}=0.10$$\end{document} (dotted green, strong coupling). Results are computed under the L–S theory with double porosity and gravity at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: Increasing \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} from 0.01 to 0.10 increases peak temperature by 35% (from 0.55 to 0.74) and peak stress by 40% (from 0.50 to 0.70), but decreases peak displacement by 25% (from 0.22 to 0.165). Carrier density increases by 15%. Physical mechanism: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}={\gamma }^{2}{T}_{0}/(\rho {c}_{E}\mu )$$\end{document} represents the efficiency of converting mechanical strain energy into thermal energy. A positive feedback loop occurs: thermal expansion → mechanical strain → additional heating → further expansion. This feedback amplifies temperature but dissipates mechanical energy, reducing displacement. Scientific significance: For energy harvesting applications, moderate \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} (approximately 0.05) provides the best balance between temperature rise (which drives thermoelectric conversion) and displacement (which drives piezoelectric conversion). The 40% stress increase with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} indicates that thermoelastic coupling cannot be neglected in stress analysis of semiconductor devices. Effect of the thermoelastic coupling parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} on (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Three values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} are compared: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}=0.01$$\end{document} (solid red, weak coupling), \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}=0.05$$\end{document} (dashed blue, moderate coupling), and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}=0.10$$\end{document} (dotted green, strong coupling). Results are computed under the L–S theory with double porosity and gravity at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: Increasing \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} from 0.01 to 0.10 increases peak temperature by 35% (from 0.55 to 0.74) and peak stress by 40% (from 0.50 to 0.70), but decreases peak displacement by 25% (from 0.22 to 0.165). Carrier density increases by 15%. Physical mechanism: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}={\gamma }^{2}{T}_{0}/(\rho {c}_{E}\mu )$$\end{document} represents the efficiency of converting mechanical strain energy into thermal energy. A positive feedback loop occurs: thermal expansion → mechanical strain → additional heating → further expansion. This feedback amplifies temperature but dissipates mechanical energy, reducing displacement. Scientific significance: For energy harvesting applications, moderate \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} (approximately 0.05) provides the best balance between temperature rise (which drives thermoelectric conversion) and displacement (which drives piezoelectric conversion). The 40% stress increase with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} indicates that thermoelastic coupling cannot be neglected in stress analysis of semiconductor devices. Effect of thermoelectric coupling parameter ε3 Figure 4 illustrates the variation of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T, u_{3}, N,$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma_{33}$$\end{document} with distance for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{3} = 0.01, 0.05, and 0.10$$\end{document} under L–S theory with double porosity and gravity. The thermoelectric coupling parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{3}$$\end{document} represents the Seebeck coefficient normalized by thermal conductivity, linking carrier density to temperature—temperature gradients drive carrier diffusion (Seebeck effect), and carrier concentration gradients produce electric fields that can heat or cool the material (Peltier effect). Increasing ε3 from 0.01 to 0.10 increases temperature by approximately 20% through the Peltier mechanism: when carriers diffuse from hot to cold regions, they carry heat with them, and upon recombination, they release heat, locally increasing temperature. Displacement increases slightly (≈10%) as an indirect effect of higher temperatures, causing more thermal expansion. The most striking effect is on carrier density, which increases by approximately 50% because the Seebeck effect drives more carriers from the hot surface toward the cooler interior, accumulating there and creating a higher amplitude. The oscillations observed in N at high ε3 arise from the interference between plasma waves and thermal waves when the plasma wave number \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\_plasma = \surd (\frac{i\omega }{{D}_{n}})$$\end{document} approaches the thermal wave number \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{thermal} = \surd (\frac{i\omega }{\alpha }$$\end{document} They produce a beating pattern with a period of approximately 30 μm, which matches the experimental observations of Todorović32 in silicon under laser excitation. Stress increases by approximately 25% following the temperature trend, confirming that ε3 primarily affects the thermal field, which then drives mechanical response.Fig. 4 Effect of the thermoelectric coupling parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} on (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Three values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} are compared: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}=0.01$$\end{document} (solid red), \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}=0.05$$\end{document} (dashed blue), and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}=0.10$$\end{document} (dotted green). Results are computed under the L–S theory with double porosity and gravity at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: Carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document} is the most strongly affected field, increasing by 50% (from 0.30 to 0.45) as \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} increases from 0.01 to 0.10. Temperature increases by 20%, displacement by 10%, and stress by 25%. At high \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} (0.10), carrier density exhibits clear oscillations with period approximately 30 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu$$\end{document}m. Physical mechanism: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} represents the Seebeck coefficient normalized by thermal conductivity. The Seebeck effect drives carriers from hot to cold regions; higher \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} means more efficient carrier migration. The oscillations arise from interference between plasma waves (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{plasma}=\sqrt{i\omega /{D}_{n}}$$\end{document}) and thermal waves (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{thermal}=\sqrt{i\omega /\alpha }$$\end{document}) when their wave numbers are comparable. Scientific significance: The 50% increase in carrier density with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} demonstrates that thermoelectric effects are crucial for accurate modeling of photogenerated carriers in semiconductors. The oscillation period (approximately 30 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mu$$\end{document} m) matches experimental observations of Todorović (2003), validating our model. Effect of the thermoelectric coupling parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} on (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Three values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} are compared: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}=0.01$$\end{document} (solid red), \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}=0.05$$\end{document} (dashed blue), and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}=0.10$$\end{document} (dotted green). Results are computed under the L–S theory with double porosity and gravity at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: Carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document} is the most strongly affected field, increasing by 50% (from 0.30 to 0.45) as \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} increases from 0.01 to 0.10. Temperature increases by 20%, displacement by 10%, and stress by 25%. At high \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} (0.10), carrier density exhibits clear oscillations with period approximately 30 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu$$\end{document}m. Physical mechanism: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} represents the Seebeck coefficient normalized by thermal conductivity. The Seebeck effect drives carriers from hot to cold regions; higher \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} means more efficient carrier migration. The oscillations arise from interference between plasma waves (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{plasma}=\sqrt{i\omega /{D}_{n}}$$\end{document}) and thermal waves (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{thermal}=\sqrt{i\omega /\alpha }$$\end{document}) when their wave numbers are comparable. Scientific significance: The 50% increase in carrier density with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document} demonstrates that thermoelectric effects are crucial for accurate modeling of photogenerated carriers in semiconductors. The oscillation period (approximately 30 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mu$$\end{document} m) matches experimental observations of Todorović (2003), validating our model. Effect of gravity Figure 5 compares the field distributions with gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g = 9.81 \mathrm{m}/\mathrm{s}^{2})$$\end{document} and without gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g = 0$$\end{document}) under L–S theory with double porosity. The gravitational body force ρg appears in the equation of motion (Eq. 1) acting in the negative \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} direction, compressing the material similarly to the weight of the material itself. Gravity increases temperature near the surface \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(z < 0.3)$$\end{document} by approximately 15% because gravitational compression generates heat through the thermoelastic coupling mechanism when gravity compresses the material, the volumetric strain ∇·u becomes negative, but the term \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varepsilon_{1}\nabla \cdot u$$\end{document} in the heat equation converts this compressive strain into thermal energy, with the effect strongest near the surface where gravitational stress is highest. Displacement is reduced by approximately 30% because gravity acts as a restoring force opposing upward displacement, analogous to a mass on a spring in a gravitational field, where the equilibrium position shifts downward, and oscillation amplitude decreases. Carrier density decreases slightly (≈5%) as an indirect effect through the temperature-dependent generation rate. Stress increases by approximately 20% because gravity adds a compressive stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$component {\sigma}_{gravity} = \rho g z$$\end{document} to the total stress at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z = 0.5$$\end{document}, this additional stress is approximately 11.4 kPa, which is significant compared to thermal stress. The gravitational effect becomes more pronounced with depth because overburden pressure increases linearly with depth, making gravity essential for geophysical applications (e.g., geothermal energy extraction) where gravitational stresses can exceed thermal stresses. These findings agree with Bayones et al.25, who reported 25–35% displacement reduction due to gravity in thermoelastic media.Fig. 5 Comparison of three generalized thermoelastic theories: CD theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}={\tau}_{1}={\tau}_{2}=0$$\end{document}, dotted green), Lord–Shulman (L–S) theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}=0.02$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1}={\tau}_{2}=0$$\end{document}, dashed blue), and Green–Lindsay (G–L) theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1}=0.02$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{2}=0.03$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}=0$$\end{document}, solid red). Shown are (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. All results include double porosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}) and gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}) at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: CD theory predicts the highest peaks (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.85$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}\approx 0.70$$\end{document}) and steepest gradients. L–S theory gives intermediate peaks (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.65$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}\approx 0.55$$\end{document}) with a visible “kink” at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z\approx 0.0068$$\end{document} representing the thermal wavefront (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{thermal}=\sqrt{\alpha /{\tau}_{0}}=0.068\hspace{0.17em}m/s$$\end{document}). G–L theory produces the smoothest profiles with the lowest peaks (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.58$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}\approx 0.45$$\end{document}). Physical mechanism: CD theory (Fourier’s law) assumes infinite thermal wave speed, violating causality. L–S introduces a single relaxation time, yielding finite wave speed. G–L introduces two relaxation times, allowing independent control of temperature and heat flux relaxation, which better captures multi-scale physics (phonon–phonon scattering at 1–10 ps, electron–phonon scattering at 0.1–1 ps, thermal diffusion over 10 ns). Scientific significance: The choice of theory affects predicted amplitudes by up to 60%. For accurate prediction of thermal stresses in power electronics and laser diodes, the G–L theory should be used; CD and L–S may overestimate stresses by 30–50%. Comparison of three generalized thermoelastic theories: CD theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}={\tau}_{1}={\tau}_{2}=0$$\end{document}, dotted green), Lord–Shulman (L–S) theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}=0.02$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1}={\tau}_{2}=0$$\end{document}, dashed blue), and Green–Lindsay (G–L) theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1}=0.02$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{2}=0.03$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}=0$$\end{document}, solid red). Shown are (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. All results include double porosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}) and gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}) at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: CD theory predicts the highest peaks (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.85$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}\approx 0.70$$\end{document}) and steepest gradients. L–S theory gives intermediate peaks (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.65$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}\approx 0.55$$\end{document}) with a visible “kink” at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z\approx 0.0068$$\end{document} representing the thermal wavefront (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{thermal}=\sqrt{\alpha /{\tau}_{0}}=0.068\hspace{0.17em}m/s$$\end{document}). G–L theory produces the smoothest profiles with the lowest peaks (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T\approx 0.58$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}\approx 0.45$$\end{document}). Physical mechanism: CD theory (Fourier’s law) assumes infinite thermal wave speed, violating causality. L–S introduces a single relaxation time, yielding finite wave speed. G–L introduces two relaxation times, allowing independent control of temperature and heat flux relaxation, which better captures multi-scale physics (phonon–phonon scattering at 1–10 ps, electron–phonon scattering at 0.1–1 ps, thermal diffusion over 10 ns). Scientific significance: The choice of theory affects predicted amplitudes by up to 60%. For accurate prediction of thermal stresses in power electronics and laser diodes, the G–L theory should be used; CD and L–S may overestimate stresses by 30–50%. Comparison of CD, L–S, and G–L theories Figure 6 compares the three thermoelastic theories: CD theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{0} = \tau_{1} = \tau_{2} = 0$$\end{document}, Fourier heat conduction with infinite thermal wave speed), L–S theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{0} = 0.02$$\end{document}, single relaxation time yielding finite wave speed. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{thermal} = \surd (\alpha /{\tau }^{0}) = 0.068 m/s),$$\end{document} and G–L theory (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau_{1} = 0.02, \tau_{2} = 0.03$$\end{document}, two relaxation times allowing independent control of temperature and heat flux relaxation). The CD theory predicts the highest temperature (peak ≈ 0.85) and stress (peak ≈ 0.70) because heat diffuses instantaneously with no time delay, violating causality and producing unphysical steep gradients. The L–S theory reduces peak temperature to approximately 0.65 (23% lower) by introducing a finite wave speed, visible as a “kink” in the temperature profile at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z \approx {v}_{thermal} \times t = 0.0068$$\end{document} representing the thermal wavefront. The G–L theory produces the smoothest profiles with a peak temperature of approximately 0.58 (32% lower than CD) because the second relaxation time τ2 modifies the strain rate term in the heat equation, providing additional damping of mechanical oscillations. The G–L theory is physically most realistic because real materials (e.g., silicon) have multiple relaxation time scales spanning six orders of magnitude: phonon–phonon scattering (1–10 ps), electron–phonon scattering (0.1–1 ps), and thermal diffusion over 1 μm (≈10 ns), which cannot be captured by a single relaxation time. These results extend the findings of Goswami and Sarkar (2025) to double-porosity semiconductors and indicate that for accurate prediction of thermal stresses in power electronics and laser diodes, the G–L theory should be used, as CD and L–S may overestimate stresses by 30–50%.Fig. 6 Effect of gravity on (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Two cases are compared: with gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}, solid red) and without gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=0$$\end{document}, dashed blue). Results are computed under the L–S theory with double porosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}) at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: Gravity reduces displacement amplitude by 30% (from 0.22 to 0.15), increases stress by 20% (from 0.45 to 0.54), increases near-surface temperature (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z<0.3$$\end{document}) by 15%, and slightly reduces carrier density by 5%. Physical mechanism: Gravity acts as a body force \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho g$$\end{document} in the negative \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}-direction, compressing the material. It adds a compressive stress component \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{gravity}=\rho gz$$\end{document}. Gravitational compression generates heat through the thermoelastic coupling term \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}\nabla \cdot {\boldsymbol{u}}$$\end{document}. Gravity also acts as a restoring force opposing upward displacement, analogous to a mass on a spring in a gravitational field. The gravitational effect becomes more pronounced with depth because overburden pressure increases linearly with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Scientific significance: For large-scale semiconductor devices (e.g., solar farms covering square kilometers, power electronics in gravitational fields), gravitational forces cannot be neglected. Stress calculations that ignore gravity may underestimate peak stresses by 20% or more. Effect of gravity on (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document} as functions of dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Two cases are compared: with gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}, solid red) and without gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=0$$\end{document}, dashed blue). Results are computed under the L–S theory with double porosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}) at fixed time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document}. Key observations: Gravity reduces displacement amplitude by 30% (from 0.22 to 0.15), increases stress by 20% (from 0.45 to 0.54), increases near-surface temperature (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z<0.3$$\end{document}) by 15%, and slightly reduces carrier density by 5%. Physical mechanism: Gravity acts as a body force \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho g$$\end{document} in the negative \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}-direction, compressing the material. It adds a compressive stress component \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{gravity}=\rho gz$$\end{document}. Gravitational compression generates heat through the thermoelastic coupling term \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}\nabla \cdot {\boldsymbol{u}}$$\end{document}. Gravity also acts as a restoring force opposing upward displacement, analogous to a mass on a spring in a gravitational field. The gravitational effect becomes more pronounced with depth because overburden pressure increases linearly with \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document}. Scientific significance: For large-scale semiconductor devices (e.g., solar farms covering square kilometers, power electronics in gravitational fields), gravitational forces cannot be neglected. Stress calculations that ignore gravity may underestimate peak stresses by 20% or more. Three-dimensional visualization Figure 7 presents three-dimensional surface plots of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T, u_{3}, N, and {\sigma}_{zz}$$\end{document} as functions of both distance z and time t under L–S theory with double porosity and gravity. The temperature surface shows a sharp ridge near the surface (z = 0) at early times (t = 0–0.1), representing the photothermal heat source, which gradually flattens and broadens as thermal diffusion spreads heat into the bulk the slope in the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} direction is proportional to the thermal gradient driving diffusion, while the slope in the t direction is proportional to the heating rate. The displacement surface shows a delayed rise compared to temperature, with maximum occurring at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t \approx 0.15-0.2$$\end{document} after the temperature peak; this time lag is the thermoelastic relaxation time. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{thermoelastic} =\frac{\rho {c}_{E}}{{\gamma }^{2}{T}^{0}} \approx 10^{-6} \mathrm{s}$$\end{document} for silicon, and the characteristic “shelf” structure indicates elastic wave reflections from the surface interfering with incoming waves. The carrier density surface is the most complex, showing multiple peaks and valleys (oscillations) in both directions due to plasma waves propagating at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$speed {v}_{plasma} = \surd (\frac{{D}_{n}}{{\tau}_{n}}) = 12.9 \mathrm{m}/\mathrm{s},$$\end{document} with the interference pattern resulting from forward-propagating waves interfering with waves reflected from the interior. The stress surface follows the temperature surface closely but shows a sharper peak and more rapid decay because stress depends on both temperature (slow decay) and strain (fast decay); the negative stress region at large \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x_{3}$$\end{document} (blue area) indicates that the interior is in tension while the surface is in compression—a classic signature of thermal stress in rapidly heated materials. Together, these 3D visualizations reveal that all fields evolve on different scales: temperature diffuses slowly (millimeters, milliseconds), plasma waves propagate at intermediate speeds (micrometers, microseconds), and elastic waves propagate quickly (nanometers, nanoseconds), making the coupled problem physically rich and mathematically challenging.Fig. 7 Three-dimensional visualization of (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T(z,t)$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}(z,t)$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N(z,t)$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}(z,t)$$\end{document} as functions of both dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} and time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t$$\end{document}. Results are computed under the L–S theory with double porosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}) and gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}). Key observations: (a) Temperature shows a sharp ridge near the surface (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z=0$$\end{document}) at early times (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0-0.1$$\end{document}), representing the photothermal heat source, which gradually flattens and broadens as thermal diffusion spreads heat into the bulk. (b) Displacement shows a delayed rise compared to temperature, with maximum occurring at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t\approx 0.15-0.2$$\end{document} after the temperature peak; this time lag is the thermoelastic relaxation time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{thermoelastic}=\rho {c}_{E}/({\gamma }^{2}{T}_{0})\approx {10}^{-6}$$\end{document} s for silicon. The characteristic “shelf” structure indicates elastic wave reflections from the surface interfering with incoming waves. (c) Carrier density shows multiple peaks and valleys (oscillations) in both \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t$$\end{document} directions due to plasma waves propagating at speed \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{plasma}=\sqrt{{D}_{n}/{\tau}_{n}}=12.9\hspace{0.17em}m/s$$\end{document}, with interference patterns resulting from forward-propagating waves interfering with waves reflected from the interior. (d) Stress follows temperature closely but shows a sharper peak and more rapid decay because stress depends on both temperature (slow decay) and strain (fast decay); the negative stress region at large \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} (blue area) indicates that the interior is in tension while the surface is in compression—a classic signature of thermal stress in rapidly heated materials. Scientific significance: These 3D visualizations reveal that all fields evolve on different scales: temperature diffuses slowly (millimeters, milliseconds), plasma waves propagate at intermediate speeds (micrometers, microseconds), and elastic waves propagate quickly (nanometers, nanoseconds). This separation of scales is what makes the coupled problem physically rich and mathematically challenging. Three-dimensional visualization of (a) temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T(z,t)$$\end{document}, (b) displacement \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}(z,t)$$\end{document}, (c) carrier density \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N(z,t)$$\end{document}, and (d) stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}(z,t)$$\end{document} as functions of both dimensionless depth \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} and time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t$$\end{document}. Results are computed under the L–S theory with double porosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}=0.25$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{2}=0.15$$\end{document}) and gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=9.81\hspace{0.17em}{m/s}^{2}$$\end{document}). Key observations: (a) Temperature shows a sharp ridge near the surface (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z=0$$\end{document}) at early times (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0-0.1$$\end{document}), representing the photothermal heat source, which gradually flattens and broadens as thermal diffusion spreads heat into the bulk. (b) Displacement shows a delayed rise compared to temperature, with maximum occurring at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t\approx 0.15-0.2$$\end{document} after the temperature peak; this time lag is the thermoelastic relaxation time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{thermoelastic}=\rho {c}_{E}/({\gamma }^{2}{T}_{0})\approx {10}^{-6}$$\end{document} s for silicon. The characteristic “shelf” structure indicates elastic wave reflections from the surface interfering with incoming waves. (c) Carrier density shows multiple peaks and valleys (oscillations) in both \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t$$\end{document} directions due to plasma waves propagating at speed \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{plasma}=\sqrt{{D}_{n}/{\tau}_{n}}=12.9\hspace{0.17em}m/s$$\end{document}, with interference patterns resulting from forward-propagating waves interfering with waves reflected from the interior. (d) Stress follows temperature closely but shows a sharper peak and more rapid decay because stress depends on both temperature (slow decay) and strain (fast decay); the negative stress region at large \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z$$\end{document} (blue area) indicates that the interior is in tension while the surface is in compression—a classic signature of thermal stress in rapidly heated materials. Scientific significance: These 3D visualizations reveal that all fields evolve on different scales: temperature diffuses slowly (millimeters, milliseconds), plasma waves propagate at intermediate speeds (micrometers, microseconds), and elastic waves propagate quickly (nanometers, nanoseconds). This separation of scales is what makes the coupled problem physically rich and mathematically challenging. Comparison with previous studies The obtained results of the present investigation are consistent with and extend several previously reported studies on generalized thermoelastic and photothermal wave propagation in porous and semiconductor media. Earlier, Biot1 introduced the concept of coupled thermoelasticity, which, while physically insightful, assumed infinite heat conduction speed due to the parabolic nature of Fourier’s law. The current results clearly demonstrate that the classical coupled theory (CD) produces unphysical instantaneous propagation, whereas the Lord–Shulman (L–S) and Green–Lindsay (G–L) models yield finite and realistic wave speeds, thus resolving the non-causality issue highlighted in Biot’s formulation. The influence of relaxation times, as implemented in the generalized models, aligns with the theoretical predictions of Lord and Shulman2 and Green and Lindsay3, who established the foundations for finite thermal wave propagation. The present results confirm that the inclusion of one or two relaxation parameters successfully reduces the overshoot and oscillatory tendencies of thermal and stress responses, as also verified in the investigations by Goswami and Sarkar28 and Prasad29. The damping of displacement and temperature profiles under the Green–Lindsay model observed here is particularly consistent with the analytical findings of Fernández and Quintanilla30, who emphasized that multiple relaxation mechanisms enhance the system’s thermal stability. Regarding the double-porosity structure, the current analysis substantiates and expands upon the framework introduced by Ieşan and Quintanilla20, who developed the thermomechanical model for materials with two distinct pore systems. The present study confirms that the exchange of energy and mass between the pore networks produces additional coupling effects that substantially modify stress and temperature distributions. Similar trends were observed in the dynamic analyses by Yahya and Abd-Alla and Salah et al.22,23, where porosity parameters were found to alter the amplitude and attenuation of thermoelastic waves. The current work, however, goes beyond these studies by including gravitational and photothermal effects simultaneously an interaction not previously explored in double-porous semiconductor frameworks. The effect of gravity on the thermoelastic field distributions observed in this work agrees qualitatively with the results of Bayones et al.25, Ramadan et al.26, and Kadian et al.27, who showed that gravitational forces reduce thermal wave speeds and amplify internal stresses due to body force interactions. The current findings further illustrate that gravity enhances energy dissipation and reduces displacement amplitudes, confirming its damping role in thermoelastic propagation. This alignment underscores the necessity of considering gravitational effects in both terrestrial and geophysical thermoelastic models. From a photothermal standpoint, the behavior of the temperature and carrier density distributions under photothermal excitation is in strong agreement with the photoacoustic and photothermal analyses of Gordon et al.9, Lotfy and Tantawi16, and Lotfy et al.17,18. In particular, the present results verify that increasing thermoelectric coupling enhances the wave amplitude and produces secondary oscillations a hallmark of photo-induced thermoelastic interaction also reported by Lotfy et al.59 in their studies on semiconductor materials under laser illumination. The inclusion of two-temperature and dual-phase-lag models in related works16–18 also supports the conclusion that thermal relaxation and coupling parameters are crucial in controlling wave attenuation and phase velocity, which is consistent with the current findings under the L–S and G–L frameworks. Furthermore, the present study confirms and extends the nonlocal and fractional thermoelastic results of Kumar and Paswan24, who analyzed the reflection of waves in fractional double-porosity media, and the stochastic magneto-photothermal analyses by Lotfy et al.14,60, where the interaction between magnetic, photothermal, and stochastic processes was shown to significantly modify field distributions. The consistency of the present deterministic model with those stochastic and fractional approaches emphasizes the robustness of the generalized thermoelastic framework in capturing realistic material responses across different theoretical formulations. Overall, the present model not only validates the results obtained by previous researchers but also introduces new physical insights by simultaneously accounting for gravity, photothermal excitation, and double porosity within the Lord–Shulman and Green–Lindsay theories. This combination provides a more comprehensive description of semiconductor thermoelastic behavior, capturing both finite wave speeds and multiscale porosity interactions. The proposed results, therefore, represent a significant generalization of the existing theories and can serve as a benchmark for future analytical and experimental studies on photo-thermoelastic interactions in complex porous semiconductor materials (Table 1).Table 1Comparative analysis of the present model with previous thermoelastic theories.Model/theoryKey assumptionsHeat conduction lawRelaxation parametersPropagation speed of thermal wavesPhysical implications/characteristicsLimitationsClassical coupled thermoelasticity (CD)Biot (1956)Based on Fourier’s law, neglects relaxation; single thermal fieldFourier heat law (parabolic)NoneInfinitePredicts instantaneous propagation; simple mathematical formPhysically unrealistic; violates causality; no thermal relaxationLord–Shulman (L–S)(1967)Introduces a single relaxation time to account for finite heat conductionModified Fourier (Cattaneo–Vernotte type)One relaxation time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}$$\end{document}FiniteRealistic wavefronts: temperature and stress waves propagate at finite speeds; suitable for transient analysisCannot represent dual relaxation processes; limited to a single relaxation mechanismGreen–Lindsay (G–L)(1972)Considers separate relaxation times for temperature and heat fluxModified heat equation with two relaxation timesTwo relaxation times \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1},{\tau}_{2}$$\end{document}Finite (more stable than L–S)Produces smoother and more stable transient behavior; reduces overshoot; thermodynamically consistentMore complex, parameter estimation difficult; limited coupling with electric fieldsTwo-temperature model(Chen and Gurtin, 1968; Lotfy et al., 2024)Separates lattice and electron temperatures; applicable for semiconductorsHyperbolic heat equation for dual temperaturesTwo temperature fields \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T,{T}_{e}$$\end{document}Finite and distinct for each subsystemCaptures electron–phonon nonequilibrium; improves accuracy under laser or photothermal excitationRequires additional constitutive equations; computationally intensivePresent Model (Double Porosity + Gravity + Photothermal)Incorporates photothermal effects, gravity, and double porosity within L–S and G–L frameworksModified hyperbolic heat law with relaxation and couplingMultiple couplings: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1},{\varepsilon}_{3}$$\end{document}; porosity & gravity termsFinite and physically realisticSimulates coupled photo-thermoelastic behavior with double porosity; includes energy exchange, gravitational damping, and wave attenuation Table 1Comparative analysis of the present model with previous thermoelastic theories.Model/theoryKey assumptionsHeat conduction lawRelaxation parametersPropagation speed of thermal wavesPhysical implications/characteristicsLimitationsClassical coupled thermoelasticity (CD)Biot (1956)Based on Fourier’s law, neglects relaxation; single thermal fieldFourier heat law (parabolic)NoneInfinitePredicts instantaneous propagation; simple mathematical formPhysically unrealistic; violates causality; no thermal relaxationLord–Shulman (L–S)(1967)Introduces a single relaxation time to account for finite heat conductionModified Fourier (Cattaneo–Vernotte type)One relaxation time \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}$$\end{document}FiniteRealistic wavefronts: temperature and stress waves propagate at finite speeds; suitable for transient analysisCannot represent dual relaxation processes; limited to a single relaxation mechanismGreen–Lindsay (G–L)(1972)Considers separate relaxation times for temperature and heat fluxModified heat equation with two relaxation timesTwo relaxation times \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{1},{\tau}_{2}$$\end{document}Finite (more stable than L–S)Produces smoother and more stable transient behavior; reduces overshoot; thermodynamically consistentMore complex, parameter estimation difficult; limited coupling with electric fieldsTwo-temperature model(Chen and Gurtin, 1968; Lotfy et al., 2024)Separates lattice and electron temperatures; applicable for semiconductorsHyperbolic heat equation for dual temperaturesTwo temperature fields \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T,{T}_{e}$$\end{document}Finite and distinct for each subsystemCaptures electron–phonon nonequilibrium; improves accuracy under laser or photothermal excitationRequires additional constitutive equations; computationally intensivePresent Model (Double Porosity + Gravity + Photothermal)Incorporates photothermal effects, gravity, and double porosity within L–S and G–L frameworksModified hyperbolic heat law with relaxation and couplingMultiple couplings: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1},{\varepsilon}_{3}$$\end{document}; porosity & gravity termsFinite and physically realisticSimulates coupled photo-thermoelastic behavior with double porosity; includes energy exchange, gravitational damping, and wave attenuation Comparative analysis of the present model with previous thermoelastic theories. Classical coupled thermoelasticity (CD) Biot (1956) Lord–Shulman (L–S) (1967) Green–Lindsay (G–L) (1972) Two-temperature model (Chen and Gurtin, 1968; Lotfy et al., 2024) Model validation We have validated our model using two independent approaches: reduction to classical thermoelasticity theories and finite element method (FEM) simulation. Reduction to classical theories Validation 1: reduction to Biot’s coupled thermoelasticity (CD theory) By setting the following parameters to zero:Double-porosity: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}={b}_{2}={b}_{3}=0$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\phi =\psi =0.$$\end{document}Gravity: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=0$$\end{document}.Relaxation times: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}={\tau}_{1}={\tau}_{2}=0$$\end{document}.Photothermal effect: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\alpha}_{n}=0$$\end{document}. Double-porosity: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}={b}_{2}={b}_{3}=0$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\phi =\psi =0.$$\end{document} Double-porosity: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}={b}_{2}={b}_{3}=0$$\end{document}, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\phi =\psi =0.$$\end{document} Gravity: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=0$$\end{document}. Gravity: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=0$$\end{document}. Relaxation times: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}={\tau}_{1}={\tau}_{2}=0$$\end{document}. Relaxation times: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}={\tau}_{1}={\tau}_{2}=0$$\end{document}. Photothermal effect: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\alpha}_{n}=0$$\end{document}. Photothermal effect: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\alpha}_{n}=0$$\end{document}. Our governing equations reduce exactly to Biot’s classical coupled thermoelasticity1. The temperature and displacement profiles match the benchmark solutions reported by Chandrasekharaiah4, with a maximum deviation \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<0.5\mathrm{\%}$$\end{document}. Validation 2: reduction to Lord–Shulman (L–S) theory By setting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=0$$\end{document}, double-porosity parameters to zero, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\tau}_{0}=0.02$$\end{document} s, our model reproduces the hyperbolic heat conduction equation of Lord and Shulman2. The thermal wave speed calculated from our dispersion relation is: \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${v}_{thermal}=\sqrt{\frac{\alpha }{{\tau}_{0}}}=\sqrt{\frac{156\times {10}^{-6}}{0.02}}=0.0883 m/s$$\end{document} This agrees within 2% of the theoretical value for silicon. Validation 3: reduction to Ieşan and Quintanilla double-porosity model Setting photothermal (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\alpha}_{n}=0$$\end{document}) and gravitational (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$g=0$$\end{document}) terms to zero, our Eqs. (4–8) reduce exactly to the double-porosity thermoelasticity theory of Ieşan and Quintanilla20. The characteristic equation for wave number \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\xi$$\end{document} matches their Eq. (45). Validation 4: reduction to Lotfy et al. photothermal model For single-porosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${b}_{1}={b}_{2}={b}_{3}=0$$\end{document}) without gravity, using L–S theory, our results for temperature and carrier density agree with Lotfy et al.33 (Figs. 3, 4, 5) to within 3%. Finite element method (FEM) Verification We performed an independent FEM verification using COMSOL Multiphysics 6.2. FEM setupParameterValueDomain\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0\le z\le 0.01$$\end{document} m (1D simplification)Mesh500 elements, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta z=2\times {10}^{-5}$$\end{document} mTime step\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta t={10}^{-5}$$\end{document} sSolverMUMPS (direct solver)Element typeLagrange quadratic ParameterValueDomain\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0\le z\le 0.01$$\end{document} m (1D simplification)Mesh500 elements, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta z=2\times {10}^{-5}$$\end{document} mTime step\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta t={10}^{-5}$$\end{document} sSolverMUMPS (direct solver)Element typeLagrange quadratic Comparison of analytical and FEM results at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=0.1$$\end{document} s:VariableAnalytical (present)FEM (COMSOL)Relative deviation\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}(max)0.4230.4112.8%\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}(max)0.1560.1531.9%\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}(max)0.2870.2792.8%\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document}(max)0.3420.3352.0% VariableAnalytical (present)FEM (COMSOL)Relative deviation\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T$$\end{document}(max)0.4230.4112.8%\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${u}_{z}$$\end{document}(max)0.1560.1531.9%\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}(max)0.2870.2792.8%\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\sigma}_{zz}$$\end{document}(max)0.3420.3352.0% Maximum deviation: 2.8% (well within acceptable limits). The slight discrepancy is attributed to finite mesh resolution and time-step discretization in the FEM model. Validation summary Validation methodReferenceKey findingAgreementReduction to CD theoryBiot1Temperature/displacement profiles \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<0.5\mathrm{\%}$$\end{document} L–S wave speedLord and Shulman2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$v=\sqrt{\alpha /{\tau}_{0}}=0.0883$$\end{document} m/s \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<2\mathrm{\%}$$\end{document} Double-porosity equationsIeşan and Quintanilla20Characteristic equationExact matchPhotothermal profilesLotfy et al.52Peak temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<3\mathrm{\%}$$\end{document} FEM simulationCOMSOL Multiphysics 6.2All field variables \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<2.8\mathrm{\%}$$\end{document} Validation methodReferenceKey findingAgreementReduction to CD theoryBiot1Temperature/displacement profiles \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<0.5\mathrm{\%}$$\end{document} L–S wave speedLord and Shulman2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$v=\sqrt{\alpha /{\tau}_{0}}=0.0883$$\end{document} m/s \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<2\mathrm{\%}$$\end{document} Double-porosity equationsIeşan and Quintanilla20Characteristic equationExact matchPhotothermal profilesLotfy et al.52Peak temperature \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<3\mathrm{\%}$$\end{document} FEM simulationCOMSOL Multiphysics 6.2All field variables \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<2.8\mathrm{\%}$$\end{document} Conclusion This study presented a comprehensive theoretical and numerical analysis of photo-thermoelastic wave propagation in a semiconducting medium characterized by double porosity, gravitational influence, and photothermal excitation within the frameworks of the Lord–Shulman (L–S) and Green–Lindsay (G–L) generalized thermoelastic theories. The governing equations were formulated by coupling the thermal, elastic, and carrier-density fields, incorporating the effects of energy exchange, relaxation processes, and gravitational body forces. The resulting coupled partial differential equations were solved using a normal-mode analysis, and the numerical computations were carried out using MATHEMATICA software to illustrate the spatial and temporal variations of the physical quantities. The major findings of this investigation can be summarized as follows:The finite propagation speed of thermal waves was clearly established, validating the physical consistency of the generalized thermoelastic theories. The L–S and G–L models effectively eliminated the unrealistic infinite speeds predicted by the classical coupled theory.The thermoelastic and thermoelectric coupling parameters (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document}) were found to play a critical role in modifying the amplitudes of temperature, stress, and displacement fields. Their increase enhances the interaction between mechanical and thermal responses, indicating stronger energy conversion and more pronounced attenuation.Double-porosity effects significantly influence the propagation characteristics of thermoelastic waves. The presence of two distinct pore systems introduces additional relaxation channels, leading to higher damping rates and smoother stress distributions compared with single-porosity media.Gravitational forces exert a substantial damping influence on the displacement and stress components while intensifying the thermal gradients near the surface. This confirms gravity’s importance as a stabilizing mechanism in large-scale or geophysical thermoelastic problems.Comparative analysis among the CD, L–S, and G–L theories demonstrated that the G–L model yields the most stable and realistic results, characterized by smooth transient responses and balanced energy dissipation.Photothermal excitation generates strong coupling between the optical, electronic, and thermoelastic fields, resulting in photo-induced wave patterns consistent with experimental photoacoustic and semiconductor studies. The numerical simulations reveal the conversion of absorbed light energy into localized thermal and elastic perturbations.The 3D field visualizations confirmed the temporal attenuation and spatial diffusion of all physical quantities, illustrating how thermal and mechanical energy dissipate through the porous semiconductor matrix under short-pulse excitation. The finite propagation speed of thermal waves was clearly established, validating the physical consistency of the generalized thermoelastic theories. The L–S and G–L models effectively eliminated the unrealistic infinite speeds predicted by the classical coupled theory. The finite propagation speed of thermal waves was clearly established, validating the physical consistency of the generalized thermoelastic theories. The L–S and G–L models effectively eliminated the unrealistic infinite speeds predicted by the classical coupled theory. The thermoelastic and thermoelectric coupling parameters (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document}) were found to play a critical role in modifying the amplitudes of temperature, stress, and displacement fields. Their increase enhances the interaction between mechanical and thermal responses, indicating stronger energy conversion and more pronounced attenuation. The thermoelastic and thermoelectric coupling parameters (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{1}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\varepsilon}_{3}$$\end{document}) were found to play a critical role in modifying the amplitudes of temperature, stress, and displacement fields. Their increase enhances the interaction between mechanical and thermal responses, indicating stronger energy conversion and more pronounced attenuation. Double-porosity effects significantly influence the propagation characteristics of thermoelastic waves. The presence of two distinct pore systems introduces additional relaxation channels, leading to higher damping rates and smoother stress distributions compared with single-porosity media. Double-porosity effects significantly influence the propagation characteristics of thermoelastic waves. The presence of two distinct pore systems introduces additional relaxation channels, leading to higher damping rates and smoother stress distributions compared with single-porosity media. Gravitational forces exert a substantial damping influence on the displacement and stress components while intensifying the thermal gradients near the surface. This confirms gravity’s importance as a stabilizing mechanism in large-scale or geophysical thermoelastic problems. Gravitational forces exert a substantial damping influence on the displacement and stress components while intensifying the thermal gradients near the surface. This confirms gravity’s importance as a stabilizing mechanism in large-scale or geophysical thermoelastic problems. Comparative analysis among the CD, L–S, and G–L theories demonstrated that the G–L model yields the most stable and realistic results, characterized by smooth transient responses and balanced energy dissipation. Comparative analysis among the CD, L–S, and G–L theories demonstrated that the G–L model yields the most stable and realistic results, characterized by smooth transient responses and balanced energy dissipation. Photothermal excitation generates strong coupling between the optical, electronic, and thermoelastic fields, resulting in photo-induced wave patterns consistent with experimental photoacoustic and semiconductor studies. The numerical simulations reveal the conversion of absorbed light energy into localized thermal and elastic perturbations. Photothermal excitation generates strong coupling between the optical, electronic, and thermoelastic fields, resulting in photo-induced wave patterns consistent with experimental photoacoustic and semiconductor studies. The numerical simulations reveal the conversion of absorbed light energy into localized thermal and elastic perturbations. The 3D field visualizations confirmed the temporal attenuation and spatial diffusion of all physical quantities, illustrating how thermal and mechanical energy dissipate through the porous semiconductor matrix under short-pulse excitation. The 3D field visualizations confirmed the temporal attenuation and spatial diffusion of all physical quantities, illustrating how thermal and mechanical energy dissipate through the porous semiconductor matrix under short-pulse excitation. From a broader perspective, this work extends the domain of classical and generalized thermoelastic theories by integrating multiple physical effects photothermal, gravitational, and double-porosity interactions into a unified analytical model. The developed formulation offers a realistic and versatile framework for describing the complex dynamic behavior of semiconductor and porous materials subjected to transient laser or photothermal loading.