Study on the Polishing Mechanism of Composite Magnetic Field-Controlled Internal Flow Channels in Additive Manufacturing Authors: Hao Li, Rui Wang, Jinxu Zhang, Suhuan Guo, Guosheng Su, Jin Du, Binxun Li, Peirong Zhang, Yan Xia, Yujing Sun Published: 2026 ABSTRACT Surface defects in additively manufactured internal channels limit their practical applications. Conventional post-processing methods suffer from limited accessibility and a tendency toward over-polishing, whereas magnetic abrasive finishing (MAF) offers high adaptability and precise process controllability. This study systematically investigates the material removal mechanisms in magnetic abrasive polishing and clarifies the distinctions and transitions between two-body and three-body wear modes. Based on these findings, a rolling removal model grounded in rough surface contact theory and a sliding removal model incorporating correction factors are established. Experiments were conducted on AlSi10Mg internal channels fabricated via selective laser melting (SLM) using a composite magnetic field polishing apparatus. The results verify the accuracy of the proposed models and demonstrate that the process effectively reduces surface defects and surface roughness. Although some deviations arise from model idealization and non-uniform magnetic field distribution, this study establishes a systematic theoretical framework for material removal in additively manufactured complex internal channels. 1. Introduction Additive manufacturing (AM), also known as 3D printing, fabricates complex, lightweight components layer by layer directly from digital models, facilitating efficient production without requiring molds [1]. AM is extensively applied in aerospace (e.g., components with internal flow channels), biomedicine (e.g., porous implants), defense, and sports equipment [2,3,4,5,6]. However, AM is susceptible to defects, including spheroidization, porosity, step effects, interlayer lack of fusion, and thermal stress cracking [7]. These defects lead to rough surfaces, dimensional deviations, and stress concentrations, which can severely compromise fatigue life, fluid performance, and sealing integrity [8]. To mitigate the process defects associated with additive manufacturing, various post-processing methods—such as electrochemical or chemical polishing using chemical reagents, hydraulic-driven abrasive flow polishing, and composite polishing that combines multiple techniques—have been developed and can generally satisfy standard processing requirements [9]. Nevertheless, these methods remain insufficient for intricate internal geometries, where issues related to tool accessibility, surface uniformity, and chemical contamination persist. Consequently, there is a critical need for novel or optimized post-processing strategies capable of addressing these challenges, particularly in components with complex internal features. In contrast to conventional post-processing techniques, magnetic abrasive finishing (MAF) offers distinct advantages. It is capable of processing multi-phase alloys containing non-conductive phases and is environmentally friendly, as it generates no chemical waste. By regulating the forces acting on abrasive particles through a magnetic field, MAF prevents abrasive embedding, over-polishing, and clogging of internal flow channels. The process is stable and highly controllable, thereby ensuring the integrity and uniformity of complex internal surfaces [10]. The working principle involves the formation of a flexible magnetic brush from abrasive particles under a magnetic field, enabling it to conform to complex surfaces for full-area polishing. For non-magnetic workpieces, an external magnetic field can be applied to generate a magnetic brush within internal cavities. Furthermore, the MAF process exhibits high controllability, strong adaptability to workpiece geometry, and self-sharpening abrasive particles that continuously renew to extend service life [11]. Magnetic abrasives typically consist of ferromagnetic and abrasive phases [12], and their performance can be further enhanced through material and process optimization. For example, Zhang et al. [13] introduced Mn as a sintering additive. The Archard wear model [14,15], originally proposed by Archard, is a classical theoretical framework for quantitatively predicting material removal. It was initially developed to analyze adhesive wear mechanisms. Building on this model, Rabinowicz [16] modified the removal formulation using a grain shape coefficient, assuming that all grains participate in cutting and that the plowed material is entirely converted into wear debris. This assumption renders the model overly idealized. Garrison and Garriga [17] further refined Rabinowicz’s equation by incorporating elastic–plastic deformation and work hardening effects. In addition, Zum Gahr [18,19] introduced a material removal ratio factor based on single-particle scratching experiments. However, existing material removal models for magnetic abrasive polishing remain limited. At the mechanistic level, these models often reduce the complex removal process to a single mechanism, whereas actual material removal arises from the interaction and evolution of multiple mechanisms. Furthermore, the empirical coefficients lack universality, which limits the accurate prediction of material removal behavior in materials with complex microstructures. Therefore, achieving precise prediction of the polishing process for complex workpieces requires the development of optimized models that integrate multiple removal mechanisms. In our previous study published in the Journal of Manufacturing Processes (2025) [20], a composite magnetic field polishing apparatus was developed and the macroscopic polishing performance of SLM AlSi10Mg internal channels was experimentally evaluated. The present work differs fundamentally from that study by focusing on the mechanistic interpretation and mathematical modeling of localized abrasive-particle interactions. Specifically, this work establishes a rolling-sliding transition framework to explain the coupling relationship between abrasive motion modes and material removal mechanisms under composite magnetic field conditions. Researchers have conducted a comprehensive review of magnetic grinding of internal surfaces in modern metal additive manufacturing parts [21,22,23], pointing out a severe lack of well-defined dynamic material removal models capable of handling complex topographies. By regulating the magnitude of the normal magnetic field force and defining the motion patterns using torque balance equations, the study enables the application of corresponding removal models to surfaces with varying roughness. This study elucidates the material removal mechanisms in magnetic abrasive polishing and establishes corresponding removal models. It clarifies the differences and interrelationships between the microscopic mechanisms of two-body and three-body wear. The results indicate that the mode of abrasive particle motion is the key determinant of the removal mechanism and provide a theoretical framework for subsequent differentiated modeling. Separate removal models are developed for the two dominant motion modes, namely rolling and sliding. The rolling model is based on the Greenwood–Williamson contact theory and describes material removal induced by the accumulation of plastic strain during repeated rolling of abrasive grains. The sliding model is based on micro-cutting mechanisms and incorporates a correction factor for the plow groove ratio. These models provide a theoretical basis for subsequent experiments and predict the results of the polishing experiments. 2. Theoretical Removal Model 2.1. Abrasive Removal Mechanism The abrasive particle removal mechanism is generally classified into two types based on particle involvement: two-body wear and three-body wear. Two-body wear occurs when abrasive particles are fixed or embedded on the tool surface and move relative to the workpiece via rolling or sliding, resembling a micro-cutting process that generates grooves or scratches. In contrast, three-body wear occurs when free abrasive particles act as an intermediate medium between two surfaces and remove material through repeated rolling and sliding actions. These two mechanisms fundamentally govern both the microscopic behavior and macroscopic efficiency of material removal. Material is continuously removed via the sliding or rolling of abrasive particles in two-body wear. In contrast, three-body wear involves a combination of rolling and sliding motions of free abrasive particles. Rolling leads to discontinuous material removal. However, changes in process parameters or surface topography may cause particles to transition from free rolling to temporary embedding and sliding, resulting in behavior similar to two-body wear. Therefore, two-body and three-body wear can transform into each other under certain conditions. This dynamic transition makes it difficult to clearly distinguish removal modes at the microscopic scale and complicates the development of corresponding theoretical models, as shown in Figure 1. Since material removal models correspond to different abrasive particle motion and stress states, they must be capable of identifying particle motion states and selecting the corresponding removal mechanisms. This requires that the model is not restricted to a single mechanism but can switch according to critical transitions in particle motion, thereby evolving from single deterministic models to composite removal models. Therefore, a deep understanding of two-body and three-body wear and their transition conditions is essential for constructing accurate and practical polishing prediction models. At the fundamental level of wear mechanisms, there exists a direct correspondence between abrasive particle motion patterns and material removal mechanisms. In three-body wear, sliding-dominated abrasive particles exhibit pronounced tangential relative motion with the workpiece surface. The sustained tangential force induces direct shear removal of material under normal loading, resulting in a continuous and efficient ploughing wear surface. In contrast, rolling-dominated abrasive particles rely on repeated normal loading to fracture the surface layer, leading to material removal via cumulative plastic deformation. Because the material removed per cycle is limited, multiple loading cycles are required, resulting in a significantly lower material removal rate compared with sliding wear. 2.2. Contact Method of Abrasive Particles In magnetic abrasive polishing, abrasive particles are subjected to complex magnetic-mechanical interactions that directly govern the material removal behavior. Under the action of the composite magnetic field, abrasive particles experience magnetic forces, normal support forces from the workpiece surface, and tangential frictional forces generated at the contact interface. In addition, adjacent abrasive particles may interact through magnetic chain coupling forces. Abrasive particles are also theoretically influenced by gravitational force and centrifugal force induced by rotational motion. Considering the microscale dimensions and relatively low inertial effects of the abrasive particles, the influences of gravitational force and centrifugal force are assumed to be negligible. Furthermore, due to the highly dynamic and stochastic nature of interparticle magnetic interactions, quantitative characterization of particle-chain coupling behavior remains extremely difficult. Therefore, to maintain analytical tractability and establish a simplified mechanistic framework, the present study analyzes the polishing behavior at the level of an individual abrasive particle. Accordingly, the following assumptions are adopted in the theoretical modeling process:(1)Abrasive particles are simplified as rigid spherical bodies;(2)Gravitational force, centrifugal force, and interparticle magnetic interactions are neglected due to their comparatively small influence on localized contact behavior;(3)Material removal is assumed to originate from localized abrasive-surface interaction under magnetic loading conditions. (1)Abrasive particles are simplified as rigid spherical bodies; Abrasive particles are simplified as rigid spherical bodies; (2)Gravitational force, centrifugal force, and interparticle magnetic interactions are neglected due to their comparatively small influence on localized contact behavior; Gravitational force, centrifugal force, and interparticle magnetic interactions are neglected due to their comparatively small influence on localized contact behavior; (3)Material removal is assumed to originate from localized abrasive-surface interaction under magnetic loading conditions. Material removal is assumed to originate from localized abrasive-surface interaction under magnetic loading conditions. The interaction between normal loading, tangential friction, and particle motion state governs the transition between rolling-dominated and sliding-dominated removal mechanisms. Establishing the force interaction relationship at the microscopic contact interface therefore provides the basis for mechanistic modeling of material removal behavior, prediction of polishing performance, and interpretation of surface morphology evolution. Within the framework of contact mechanics, Johnson’s contact theory [24] classifies the contact states between abrasive grains and the workpiece surface into three regimes according to the normal load and indentation depth (Figure 2). During the elastic contact regime, the normal load remains low and the contact stress stays below the material yield limit. Only reversible elastic deformation occurs, and no material is removed. Under elastic–plastic contact conditions, the normal load exceeds the yield limit and induces plastic deformation in the contact zone. Partial elastic recovery occurs upon unloading. Both micro-cutting and plastic deformation contribute to material removal. When the contact reaches the fully plastic regime, plastic deformation dominates the entire contact zone and results in permanent material removal. The understanding and control of contact state transitions are of critical importance in magnetic abrasive polishing. By regulating key parameters, such as magnetic field strength and abrasive particle properties, the interaction between abrasive particles and the workpiece can be maintained within a desired contact regime, enabling controlled and efficient material removal and improved surface integrity. Therefore, applying the Johnson contact mechanics model to identify and predict contact modes is a key theoretical step toward precise process control. Based on Johnson’s theory, the following approach can be derived: When h < he0, the contact is elastic. Within this range, the expression for the normal force Ft is:(1)Ft=43R12E*h32 where R is the radius of the abrasive particle, E* is the composite elastic modulus, h is the penetration depth. When he0 < h < hp0, the contact is elastic. Within this range, the expression for the normal force Ft is:(2)Ft=43πRσyh2+ln14E*σy2hR12+13 where R is the radius of the abrasive particle, σy is the yield strength of the workpiece, h is the penetration depth, E* is the composite elastic modulus. When hp0 < h, the contact is elastic. Within this range, the expression for the normal force Ft is:(3)Ft=2.9πRσyh where R is the radius of the abrasive particle, σy is the yield strength of the workpiece, h is the penetration depth. Where(4)he0=0.64π2Rσy2E*2hp0=9π42σyE*2R he0 is the indentation depth of the abrasive grain when the contact stress at the contact surface reaches the elastic limit, hp0 is the indentation depth of the abrasive particle when full plastic deformation occurs, R is the radius of the abrasive particle, σy is the yield strength of the workpiece, E* is the composite elastic modulus.(5)1E*=1−νk2Ek+1−νi2Ei Ek and Ei are the elastic moduli of the workpiece and abrasive, νk and νi are the Poisson’s ratios of the workpiece and abrasive. 2.3. The Motion of Abrasive Particles Under three-body wear conditions, the workpiece surface exhibits point-like or short-arc indentations, randomly oriented plough marks, or their combination under varying normal loads. These features arise from the stochastic motion of abrasive particles, making the identification of their motion patterns essential for establishing a material removal model. Abrasive particles exhibit multiple motion modes, including sliding, rolling, spinning, and their combinations. Among these modes, sliding and rolling dominate the material removal process. Sliding-induced removal is analogous to micro-cutting in two-body wear, whereas rolling-induced removal results primarily from cumulative plastic deformation under repeated compression. Rotational motion is transient and unstable, and its contribution to material removal is negligible. Combined sliding–rolling motion is also unstable in practice due to the significantly lower rolling friction compared with sliding friction. According to the principle of minimum energy dissipation, abrasive particles preferentially adopt the rolling mode whenever possible. Therefore, theoretical models of three-body wear typically consider only sliding and rolling as the dominant motion modes. Analyzing the transition conditions between these modes is essential for predicting surface topography and controlling material removal behavior. To this end, a quasi-static mechanical model of magnetic abrasive particles under magnetic field and workpiece constraints is required. Unlike conventionally manufactured aluminum alloys, SLM-fabricated AlSi10Mg exhibits a highly heterogeneous microstructure resulting from rapid solidification during the laser powder bed fusion process. The material consists of a supersaturated α-Al matrix surrounded by eutectic Si networks, accompanied by melt pool boundaries, partially melted particles, and staircase surface defects. Consequently, the local mechanical properties, including hardness and yield behavior, are spatially non-uniform across the internal channel surface. During magnetic abrasive finishing, abrasive particles may interact differently with distinct microstructural regions. These localized variations may influence the rolling-sliding transition behavior of abrasive particles and contribute to the stochastic nature of material removal during polishing. To maintain analytical tractability, homogenized material properties were adopted in the present model. A single spherical abrasive particle is primarily subjected to a composite magnetic force generated by the circumferential electromagnetic solenoid and the axial annular electromagnetic coil (Figure 3a,c). In addition, it experiences normal support and tangential friction from the workpiece surface. The composite magnetic force at point A is decomposed into tangential and normal components relative to the workpiece surface. At the contact point (point B), the workpiece exerts a normal support force and a tangential friction force on the abrasive particle. Fang Liang et al. [25] proposed a torque-balance-based method to determine the motion state of spherical abrasive particles. This method is based on the critical equilibrium condition at the onset of motion, where the force balance satisfies Fmx = FR and Fmy = FN. The determination of the motion mode depends on the magnitude of the torque about point A or point B. Taking point B as the pivot point, the driving torque for rolling is Fmx · h, while the resisting torque is Fmy · e, where h and e denote the corresponding lever arms relative to point B. The torque equilibrium criterion can be expressed as: When Fmx · h > Fmy · e, the driving torque is dominant, the abrasive particles roll. When Fmx · h ≤ Fmy · e, the driving torque is not enough to overcome the resistance torque, the abrasive particles slide. The lever arms e and h are functions of particle size, material properties, and the applied normal force, and are given as follows:(6)e=43π2D04H2−Fmy2π2D0H(7)h=23π2D04H2−108Fmy2π2D04H2−Fmy2π3D05H3 where D0 is the abrasive particle diameter, H is the workpiece hardness. Furthermore, by incorporating the actual magnetic field distribution of the experimental device (Figure 3b), Equations (6) and (7) and the corresponding decision criteria are further specified, leading to the formulation of Equations (8) and (9). Rolling:(8)Fc2 d are assumed to be in contact with the abrasive particle, resulting in plastic deformation and material removal. Assuming that the asperity heights follow a Gaussian distribution, the probability density function is expressed as:(13)Φz=12πσe−z2σ2 The probability of contact for a single asperity is expressed as:(14)pz>d=∫d∞Φzdz N′ denotes the total number of surface asperities. The number of asperities in contact can be expressed as:(15)n=N′∫d∞Φzdz (2)Contact area of a single asperity and total contact area Contact area of a single asperity and total contact area Under fully plastic deformation conditions, when an individual asperity comes into contact with an abrasive particle, its contact area Ai is governed by the deformation height ω (where ω = z − d) and the asperity radius of curvature β, and can be expressed as:(16)Ai=λπβω In the above expression, λ = 2 denotes the fully plastic deformation regime. Accordingly, the total plastic deformation area generated by all contacting asperities can be expressed as:(17)A=∑Ai=N′λπβ∫d∞z−d12πσe−z2σ2dz (3)Incorporation of surface statistical parameters and abrasive particle geometry Incorporation of surface statistical parameters and abrasive particle geometry The total number of surface asperities is given by N´ = ηA0, where η denotes the asperity density and A0 is the nominal contact area. For spherical abrasive particles, the contact region at a given indentation depth is approximated as a circular area with radius, α leading to A0 = πα2. Taking the mean asperity height as the reference plane, the maximum asperity height is denoted as M. The total actual contact area is obtained by integrating the asperity height distribution, with the upper integration limit set to M.(18)A=2ηπ2α2β∫dMz−d12πσe−z2σ2dz In the above expression, d = M − h, where h represents the normal indentation depth of the abrasive particle. (4)Calculation of material removal mass Calculation of material removal mass The total material removal mass is determined by the number of active abrasive particles, the total plastic contact area, the sliding path length on the workpiece surface, and the material density of the workpiece. Accordingly, the total material removal mass in the rolling removal model can be expressed as:(19)Ma=ρ·A·L·N=2ρLηπ2α2βN∫dMz−d12πσe−z2σ2dz where ρ is the mass density of the workpiece, A is the total plastic contact area, L is the path length of a single abrasive particle, N is the number of magnetic abrasive particles involved in the removal, η is the surface density of the asperity on the workpiece surface, α is the indentation radius of the contact area after the abrasive particles are pressed into the workpiece, β is the radius of the asperity, M is the maximum peak height of the asperity, d is the distance between the contact surface of spherical abrasive particles and the average height plane of asperity, z is the height coordinate of asperity based on the average height of asperity, σ is the standard deviation of the peak height distribution of the workpiece surface profile. The number of magnetic abrasive particles removed is:(20)N=m1m2=m1ρ1aa+b+ρ2ba+b·43πR3 In the formula, m1 is the total abrasive mass, m2 is the single abrasive mass, ρ1 is the iron matrix mass density, ρ2 is the abrasive mass density, a:b is the proportion of iron matrix and abrasive, R is the abrasive radius. The radius of the slight protrusion is:(21)β=Δ2−zi+1+2zi−zi−1 In the formula, zi > zi−1 and zi > zi+1, Δ is the sampling interval. The standard deviation of the peak height distribution of the workpiece surface profile is:(22)σ=∑i−1nzi−μ2n In the formula, μ is the overall mean, n is the total amount of data. In experimental analysis, a sample is used to represent the population, and the sample standard deviation is defined as:(23)S=∑i=1nzi−z¯2n−1 In the formula, z¯ is the sample mean, n is the sample size. This model establishes a statistical framework that connects stochastic microscale plastic deformation with macroscopic material removal behavior, enabling the prediction of rolling-dominated wear and material removal processes. 2.6. Single Abrasive Particle Sliding Removal Model During sliding removal, material removal is primarily governed by micro-cutting mechanisms. Abrasive grains directly remove material in the form of chips, while a small amount of material is displaced to the groove sides due to the ductility of the workpiece and forms pile-up. For modeling simplification, the sliding removal model is formulated based on the dominant micro-cutting mechanism, and the contribution of plastic deformation is neglected. According to Johnson’s contact theory, the abrasive particles and the workpiece are in an elastoplastic contact state under normal loading, and partial elastic recovery occurs during unloading. Accordingly, the actual material removal volume is determined by subtracting elastic recovery from the theoretical groove removal volume, as illustrated in Figure 6b. (1)Geometric model and volume calculation Geometric model and volume calculation A spherical magnetic abrasive particle of radius R is subjected to a normal load F, leading to sliding micro-cutting during indentation into the workpiece. The cross-section of the theoretical groove is approximated as a circular segment, and the corresponding groove volume V1 is obtained as the product of the cross-sectional area and the sliding path length, and is given by:(24)V1=R2·arcsinαR−α·R−h·L where R is the radius of the spherical magnetic abrasive particles, α is the chord length related to the indentation geometry, h is the indentation depth of the abrasive particles, L is the path length of the abrasive particles. Following polishing, the groove depth partially recovers due to elastic recovery of the material. The corresponding groove volume V1 after elastic recovery is defined as:(25)V2=R2·arcsinβR−β·R−tc·L In the above expression, R is the radius of the spherical magnetic abrasive particles, β is the chord length after elastic recovery, L is the path length of the abrasive particles, tc denotes the total elastic deformation within the contact area, and is given by:(26)tc=916R13FnE*23 where R is the radius of the spherical magnetic abrasive particles, Fn is the normal force, E* is the composite elastic modulus between the abrasive particles and the workpiece, the calculation formula is shown in Equation (5). (2)Introduction of the furrow ratio coefficient Introduction of the furrow ratio coefficient Material removal during elastoplastic sliding cutting is inherently complex. As shown in Figure 7, even when elastic recovery is neglected, only a fraction of the removed material is converted into chips, while the remainder is extruded to the groove sides, forming permanent plastic pile-up ridges. Therefore, the actual chip volume is significantly smaller than the theoretical groove volume. Accordingly, Zum Gahr [18,19] introduced a furrow ratio coefficient fab to correct the sliding removal model, defined as the fraction of material actually converted into chips, as given in Equation (27). Where 0 < fab < 1, its value is governed by material properties and abrasive particle geometry and must be determined experimentally.(27)fab=Ag−A1+A2Ag In the equation, Ag is the cross-sectional area of the furrow, A1 and A2 are the cross-sectional areas of the plastic ridges on both sides. (3)Total material removal mass model Total material removal mass model The total material removal mass in sliding mode can be expressed by accounting for elastic recovery, the furrow ratio coefficient, and the number of active abrasive particles:(28)Mb=fab·ρ·N·L·R2·arcsinαR−arcsinβR+Rβ−α+αh−β916R13FnE*23 In the formula, fab is the furrow ratio coefficient, ρ is the density of the workpiece material, N is the number of magnetic abrasive particles involved in the removal, L is the path length of the abrasive particles, R is the radius of the spherical magnetic abrasive particles, α is the chord length related to the indentation geometry, β is the chord length after elastic recovery, h is the indentation depth of the abrasive particles, Fn is the normal force, E* is the composite elastic modulus. 3. Experiment 3.1. Experiment Preparation To verify the material removal rates predicted by different removal models, the experiments employed a spherical magnetic pole-based magnetic abrasive polishing system. In this configuration, magnetic abrasive particles (MAPs) were used to validate the rolling removal model, whereas magnetic bead–magnetic abrasive particles (MB–MAPs) were adopted for validation of the sliding removal model. The composite magnetic abrasive particles used in this study were developed by research group [13], and their morphology is shown in Figure 8a. The workpieces used in this study are AlSi10Mg cylindrical internal flow channels fabricated by SLM, with dimensions of 30 mm in length, 16 mm in inner diameter, and 20 mm in outer diameter. The geometric parameters of the internal flow channel are summarized in Table 1. To validate the proposed material removal model and realize controllable polishing, Guo et al. [20] developed a magnetically controlled polishing system based on a composite magnetic field, as shown in Figure 9. The system comprises four circumferentially distributed electromagnetic solenoids and two axially symmetric annular coils. Independent regulation of coil currents enables precise control of both the direction and magnitude of the magnetic field. The alternating gradient magnetic field is generated via periodic modulation of the circumferential solenoid currents, inducing rotational motion of the magnetic abrasive particles along the inner wall for circumferentially uniform processing. Meanwhile, the axial oscillating magnetic field generated by the annular coils produces reciprocating axial motion, ensuring complete coverage of the internal surface. 3.2. Inner Flow Channel Experiment of Magnetic Abrasive Polishing During the development of the magnetic abrasive polishing model, the normal force serves as a governing parameter. According to Johnson’s contact mechanics theory, the relationship between the normal force acting between the magnetic bead and abrasive particles and the indentation depth is established, providing a theoretical basis for the single-particle sliding removal model. By integrating experimentally measured normal force data with torque balance analysis, the sliding removal model is formulated, and the furrow ratio coefficient is determined. A thin-film pressure sensor integrated with a magnetic bead–magnetic abrasive polishing tool was employed to measure the normal force experimentally, as shown in Figure 10b. The theoretical normal force calculated from the indentation depth is 1.471 N, whereas the average experimentally measured value is 1.359 N. The relative error is 8.26%, demonstrating good agreement between the theoretical prediction and experimental measurements. To determine the furrow ratio coefficient fab under the present experimental conditions, single-particle scratch tests were performed under controlled conditions. Scratches were generated on a polished AlSi10Mg surface under the same normal load as that used in the force measurement experiments. The 3D morphology and cross-sectional profiles of the scratches were obtained using a laser confocal microscope, as shown in Figure 11. From the cross-sectional profile analysis, the theoretical groove area Ag and the plastic pile-up areas on both sides (A1 and A2) were extracted, and the value of fab was determined from Equation (27). And the single-particle scratch test was intended to approximate the local abrasive-material interaction behavior rather than fully reproduce the collective dynamics of the magnetic abrasive brush. In practical MAF processes, abrasive particles are constrained by flexible magnetic chains and dynamic magnetic interactions, resulting in compliant multi-particle contact behavior. Therefore, the scratch test provides a simplified characterization of the local micro-cutting and plowing behavior under controlled contact conditions. In the present study, an averaged furrow ratio coefficient was adopted as a simplified approximation to characterize the overall material removal tendency during the polishing cycle. Although this assumption improves model tractability, it may introduce deviations during the early-stage roughness reduction process. The polished-surface scratch test still provides valuable comparative information regarding local abrasive-material interaction behavior and offers a controllable basis for estimating the relative contribution of plowing-induced deformation during magnetic abrasive finishing. To ensure experimental repeatability, the magnetic abrasives were replaced every 15 min during the polishing process. The samples were periodically weighed every 30 min using an electronic balance with a resolution of 0.1 mg to determine the material removal mass. The experiments were performed on SLM-fabricated AlSi10Mg cylindrical internal channels using composite magnetic abrasives under a coil excitation frequency of 5 Hz. To ensure experimental repeatability and statistical reliability, each polishing experiment was repeated three times under identical conditions. The reported surface roughness and material removal results represent the average values of the repeated measurements, and the corresponding standard deviations are presented as error bars in the figures. As shown in Figure 12a, the material removal performance of MB–MAPs is consistently superior to that of MAPs at the early stage of polishing. At 30 min, the experimental material removal of MAPs is 2.1 × 10−3 g, whereas that of MB–MAPs reaches 3.0 × 10−3 g, corresponding to an improvement of approximately 42.9%. At 60 min, the improvement remains significant at 18.2%, while at 90 min, the enhancement decreases to about 10%. However, as the polishing process progresses, the advantage of MB–MAPs gradually diminishes. At 120 min, the material removal of MB–MAPs becomes slightly lower than that of MAPs, indicating that the process enters a fine finishing stage where the removal mechanism is dominated by surface smoothing rather than aggressive cutting. To evaluate the predictive capability of the theoretical model, the relative error between theoretical and experimental values was calculated. For MAPs, the relative error ranges from 14.7% to 37.0% in the initial stage and increases significantly at later stages due to the extremely low material removal. In contrast, the error for MB–MAPs is generally lower, remaining within 10–25% over most of the polishing duration. These results indicate that the proposed model exhibits better predictive accuracy for the MB–MAP system, suggesting that the material removal mechanism under the composite magnetic field is more stable and consistent with theoretical assumptions. 4. Discussion The results demonstrate that the MB–MAPs system achieves significantly higher material removal than conventional MAPs at the early stage, with an improvement of up to about 43% at 30 min. This enhancement supports the working hypothesis that magnetic balls reinforce the abrasive brush by increasing normal force and stabilizing abrasive motion, thereby promoting more effective micro-cutting. Similar effects have been reported in magnetic field-assisted finishing, where stronger magnetic chains lead to higher removal efficiency. As polishing progresses, the advantage of MB–MAPs gradually diminishes. This trend indicates a transition in the dominant removal mechanism from micro-cutting to plastic deformation and surface smoothing, where the contribution of force enhancement becomes less significant. Such stage-dependent behavior is consistent with previous studies on abrasive finishing processes. The theoretical model shows good agreement with experimental results, particularly for the MB–MAP system, suggesting that it captures the essential removal characteristics under composite magnetic fields. The increased deviation at later stages is mainly attributed to abrasive wear, elastic recovery, and measurement limitations when the removal approaches the resolution of the balance. Overall, the findings highlight the effectiveness of MB–MAPs in improving early-stage polishing efficiency and provide guidance for process optimization. Future work should focus on incorporating abrasive evolution and adaptive control strategies to further enhance model accuracy and finishing performance. Although the proposed model provides a mechanistic interpretation of the rolling-sliding transition behavior during magnetic abrasive finishing, several limitations remain. The present study adopts homogenized material properties and simplified statistical contact assumptions, while the actual SLM surface exhibits heterogeneous microstructures and dynamically evolving roughness topographies. Future work will focus on incorporating elastoplastic asperity evolution models, adhesive contact behavior, and time-dependent roughness evolution into the polishing framework. In addition, coupling between magnetic brush flexibility and multi-particle stochastic interactions will be further investigated to improve predictive capability for complex AM internal channels. To complement the mechanistic modeling and provide a more comprehensive assessment of surface integrity, Abbott–Firestone bearing area curve analysis [27] and additional surface functional parameters will also be employed to characterize the evolution of load-bearing characteristics and surface morphology following composite magnetic field polishing. 5. Conclusions This work systematically investigates the surface finishing of AlSi10Mg internal channels fabricated by additive manufacturing using magnetic abrasive finishing under a composite magnetic field. The main conclusions are as follows: (1)A mechanistic material removal model based on micro-cutting and plastic deformation is established and validated. Experimental comparison between MAPs and MB–MAPs shows good agreement, with relative errors of MB–MAPs generally within 10–25%.(2)MB–MAPs significantly enhance early-stage material removal efficiency, improving by about 42.9% at 30 s and 18.2% at 60 s. The enhancement decreases with time, while surface quality is improved through more effective removal of asperities and adhered particles.(3)The composite magnetic field ensures stable abrasive motion and full coverage in complex channels. However, the removal rate decreases from 3.0 × 10−3 g to below 1.0 × 10−4 g as polishing progresses, indicating a transition from dominant cutting to surface smoothing.(4)The combined model and process provide a unified framework for understanding material removal behavior. Deviations at later stages are mainly due to abrasive wear, elastic recovery, and measurement limitations, offering guidance for process optimization of additively manufactured components.(5)Since surface roughness and residual surface defects strongly influence the corrosion behavior of additively manufactured aluminum alloys, future work will further investigate the influence of composite magnetic field polishing on corrosion resistance and long-term surface stability in complex internal flow channels. (1)A mechanistic material removal model based on micro-cutting and plastic deformation is established and validated. Experimental comparison between MAPs and MB–MAPs shows good agreement, with relative errors of MB–MAPs generally within 10–25%. A mechanistic material removal model based on micro-cutting and plastic deformation is established and validated. Experimental comparison between MAPs and MB–MAPs shows good agreement, with relative errors of MB–MAPs generally within 10–25%. (2)MB–MAPs significantly enhance early-stage material removal efficiency, improving by about 42.9% at 30 s and 18.2% at 60 s. The enhancement decreases with time, while surface quality is improved through more effective removal of asperities and adhered particles. MB–MAPs significantly enhance early-stage material removal efficiency, improving by about 42.9% at 30 s and 18.2% at 60 s. The enhancement decreases with time, while surface quality is improved through more effective removal of asperities and adhered particles. (3)The composite magnetic field ensures stable abrasive motion and full coverage in complex channels. However, the removal rate decreases from 3.0 × 10−3 g to below 1.0 × 10−4 g as polishing progresses, indicating a transition from dominant cutting to surface smoothing. The composite magnetic field ensures stable abrasive motion and full coverage in complex channels. However, the removal rate decreases from 3.0 × 10−3 g to below 1.0 × 10−4 g as polishing progresses, indicating a transition from dominant cutting to surface smoothing. (4)The combined model and process provide a unified framework for understanding material removal behavior. Deviations at later stages are mainly due to abrasive wear, elastic recovery, and measurement limitations, offering guidance for process optimization of additively manufactured components. The combined model and process provide a unified framework for understanding material removal behavior. Deviations at later stages are mainly due to abrasive wear, elastic recovery, and measurement limitations, offering guidance for process optimization of additively manufactured components. (5)Since surface roughness and residual surface defects strongly influence the corrosion behavior of additively manufactured aluminum alloys, future work will further investigate the influence of composite magnetic field polishing on corrosion resistance and long-term surface stability in complex internal flow channels. Since surface roughness and residual surface defects strongly influence the corrosion behavior of additively manufactured aluminum alloys, future work will further investigate the influence of composite magnetic field polishing on corrosion resistance and long-term surface stability in complex internal flow channels.