Dipolar interaction-mediated molecular anchoring electrolyte enables wide-temperature sodium-ion batteries with enhanced safety and durability Authors: Yong-Li Heng, Zhen-Yi Gu, Yuan-Zheng Tang, Han-Hao Liu, Xiao-Tong Wang, Jie Wang, Shu-Yu Li, Xing-Long Wu Published: 2026 ABSTRACT AbstractGiven intractable challenges faced by practical sodium-ion batteries in safety, lifespan and broad temperature adaptability with synergistic interfacial compatibility, persistent efforts in electrolyte engineering are imperative to expedite their commercialization. Here we design a molecular anchoring electrolyte with flame retardancy, oxidative/reductive reliability and electrochemical durability against various electrodes. Through multiple dipolar interactions (δ+H-δ-F and δ+H-δ-O), a dynamic hierarchical solvation network is constructed and its unique interface stabilization mechanism is revealed by multiscale characterizations and theoretical insights. The electrolyte endows high-voltage phosphate positive electrodes with high electrochemical durability (for instance, 87.6% of capacity retention after 5000 cycles at 2 C) through constructing robust interphases containing fluorine and nitrogen elements. Good compatibility with commercial layered oxide positive electrodes further indicates its versatility. Strikingly, the electrolyte also makes it feasible to operate under wide temperature range (−60 ~ 70 °C). Our proposed dipolar interaction regulation mechanism provides an effective approach for designing safe and durable electrolytes, stimulating practical application of wide-temperature sodium-ion batteries in pursuit of sustainable energy storage.Subject terms: Batteries, Batteries, Batteries Introduction SIBs are emerging as ideal candidates for next-generation large-scale energy storage technologies due to their significant resource advantages, environmental friendliness and potential economic benefits1,2. Unfortunately, despite tremendous breakthroughs in electrode materials like layered oxides and polyanionic compounds3–6, the commercialization of SIBs remains constrained by two critical technical bottlenecks: (i) under high-voltage conditions (>4.2 V), electrochemical durability and interfacial compatibility with highly reactive electrodes is insufficient for conventional electrolyte systems, causing limited lifespan7,8; (ii) in wide-temperature environments (<−40 °C or >60 °C), sharp decline in ionic conductivity of electrolytes and exacerbation of interfacial parasitic reactions accelerate battery failure9,10, severely restricting their application in special scenarios (e.g., polar exploration, aerospace). Particularly, safety concerns should not be underestimated for battery sustainability11. The essence of these problems lies in multiscale failure mechanisms of conventional electrolytes: at the molecular level, thermodynamic instability of solvation structures causes uncontrolled oxidation decomposition kinetics at high voltages; from an interfacial perspective, insufficient mechanical strength and chemical inertness of electrode-electrolyte interphases (EEIs) fail to suppress mechanical fracture and parasitic reaction penetration during cycling12,13. Existing research faces trade-off dilemmas, including specific energy reduction (e.g., capacity loss in electrodes caused by high-salt systems) or process economic efficiency deterioration (e.g., skyrocketing costs of fluorinated solvents)14,15. How to achieve multiscale synergistic optimization in electrolyte solvation, interfacial mechanics, and electrochemical stability remains a key scientific challenge for the practical application of SIBs. Electrolytes, serving as the “ion transport hub” of batteries, profoundly affect electrochemical properties and interfacial chemistry through their solvation structures16, modulated by intermolecular interactions (ion–ion, ion–dipole and dipole–dipole). In conventional carbonate (e.g., propylene carbonate, PC) and ether-based (e.g., 1,2-dimethoxyethane, DME) electrolytes, strong cation–dipole interactions predominantly promote the formation of solvent-separated ion pairs, facilitating salt dissociation and high ionic conductivity17,18. Unfavorably, they bring about vulnerable EEIs rich in organic components, which tend to rupture and fail under cyclic stress. Additionally, excessive free solvents undergo persistent parasitic reactions at the interfaces during the cycle, thus, drastic electrochemical deterioration occurs. To address this dilemma, solvation engineering has made critical breakthroughs: except for prevalent (localized) high-concentration electrolytes with enhanced anion coordination to form inorganic-rich EEIs19–21, emerging weakly solvating electrolytes with reduced cation–dipole interactions enable contact ion pairs and aggregates to accumulate and dominate22–25, constructing high-modulus EEIs. Nevertheless, these approaches are plagued by low salt solubility, high viscosity and excessive fluoride dependence26. Lately, hybrid strongly and weakly solvating electrolytes (e.g., tetrahydrofuran/N,N-dimethyltrifluoromethane sulfonamide, THF/DMTMSA27) allow for synchronous optimization in both positive electrodes and Na metal electrode by regulating ion–dipole interactions and solvation configurations. Furthermore, entropy regulation effects have been introduced into electrolyte design, leveraging configurational entropy to inhibit solvent crystallization, demonstrating great promise for applications under extreme conditions28–30. Nonetheless, relevant research remains in its infancy, extensive exploration is required. Additionally, considering persistent safety concerns, abundant flame-retardant systems, including phosphates31,32, fluorinated phosphazenes33,34, and ionic liquids are discovered to reduce self-extinguishing times but bring about issues like high viscosity, poor wettability and incompatibility with negative electrodes35,36. The current core challenge lies in balancing conflicting parameters, such as ionic conductivity, interfacial stability, cost and environmental friendliness, which necessitates persistent rational design and exploration. Herein, we conducted a comprehensive analysis of prevalent carbonate and ether-based solvents to further elucidate their intrinsically complementary characteristics. On this basis, a dipolar interaction-mediated molecular anchoring electrolyte engineering was conceived to integrate strongly solvating ester (PC), weakly solvating ether (ethylene glycol diethyl ether, DEE) and anti-solvent (ethoxy (pentafluoro)cyclotriphosphazene, PFPN) for safe and durable SIBs under a wide temperature range. Particularly, not only anion–dipole interactions via δ+H-δ−F between PF6− and PC or PFPN but also dipole–dipole interactions via δ+H-δ−O, δ+H-δ−F between PFPN and PC or DEE have been deciphered through spectroscopic and theoretical investigations, effectively activating PFPN anti-solvent and restricting free PC/DEE molecules by anchoring effect from PFPN. Through modulating dipolar interactions, the electrolyte enables great compatibility with both negative electrodes and high-voltage positive electrodes, accompanied by the construction of robust EEIs rich in F/N. Consequently, representative high-voltage phosphates demonstrate good cycling stability, e.g., 87.6% of reversible capacity after 5000 cycles for Na3V2(PO4)2O2F (NVPOF) model positive electrode. Conspicuously, the electrolyte also sustains successful operation under wide temperatures (WTs: −60 to 70 °C), with admirable capacity retention of 95.2% over 900 cycles at 70 °C and 51.2 mAh g−1 of reversible capacity at −60 °C for Na3V2(PO4)3 (NVP). Great adaptability to Na4Fe3(PO4)2P2O7 (NFPP) and layered oxide (Na0.67Ni0.33Mn0.67O2, NNMO) positive electrodes has also been confirmed. More importantly, hard carbon (HC)||sodium nickel iron manganese oxide (NNFMO) pouch cells also demonstrate 1.05 and 0.66 Ah of discharge capacities at −25 and −40 °C, further substantiating the low-temperature (LT) applicability of the optimized electrolyte. This work reveals a dipolar interaction-mediated solvation-interface synergistic stabilization mechanism and establishes a “molecular anchoring-solvation configuration-interfacial dynamics” structure-property relationship, providing insights into the advancement of safe and durable electrochemical systems under special conditions like polar exploration and deep space missions. Results Comparative analysis of prevalent carbonates and ethers There is a trade-off between conventional carbonate and ether-based solvents from the perspective of electrolyte design. Integrated electrolyte engineering has attracted great attention due to their promise of comprehensive electrochemical properties, especially the following critical aspects: battery lifespan, energy efficiency, cost effectiveness and safety concerns (Fig. 1a). Careful selection of sodium salts, solvents and additives is essential to electrochemical properties. Generally, NaPF6 is deemed as an ideal sodium salt when taking solubility, conductivity, chemical/thermal stability, toxicity and corrosive nature into account together, compared to other sodium salts like NaBF4, NaClO4, NaOTf, and NaFSI37. Furthermore, it is recognized that carbonates and ethers constitute two primary solvent systems in SIBs that have been extensively investigated. Basic physicochemical properties of representative carbonate and ether solvent molecules have been summarized in Fig. 1b and Supplementary Tables 1, 238,39. The four sets of data on the left are derived from previous literature, while the data on the right are obtained through theoretical calculations. Cyclic carbonates like ethylene carbonate (EC) and PC exhibit dielectric constants far greater than those of other solvents, indicating high solvation ability and ionic conductivity. Among them, PC possesses the widest liquid range with low melting point (−48.8 °C) and high boiling point (242 °C), conducive to sustaining a wide service temperature range of batteries40,41. EC is solid with 36.3 °C of melting point and difficult to use alone42. Generally, ethers exhibit low melting and boiling points, especially THF and 2-methyltetrahydrofuran (MeTHF), which are volatile and prone to oxidation43,44. DEE demonstrates a moderate melting and boiling point (−74 and 121 °C, respectively). In addition, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of these solvents are calculated based on density functional theory (DFT) to determine their oxidation and reduction properties (Supplementary Fig. 1). Generally, carbonates have significantly lower HOMO levels, indicating higher oxidation stability and thus compatibility with high-voltage positive electrodes. Meanwhile, their lower LUMO levels imply inferior reduction stability and thus poor compatibility with negative electrodes. In contrast to carbonates, ethers demonstrate higher HOMO and LUMO energy levels, manifesting worse oxidation stability, while better reduction stability. Binding energy calculations with optimized structures for various Na+-solvent complexes are conducted, as depicted in Supplementary Fig. 2. Furthermore, for rational electrolyte design, electrostatic potential (ESP) analysis of these solvent molecules is demonstrated in Fig. 1c, which is a crucial descriptor to further elucidate interactions between Na+ and solvents45,46. Their negative charges are mainly localized at oxygen atoms, which are prone to coordinate with Na+. Among them, strong polar PC exhibits a minimum ESPmin with |ESPmin| > ESPmax, implying strong coordination ability. While the DEE molecule shows less negative ESPmin and significantly decreased ESPmax, accompanied by more uniformly distributed electron density, indicating decreased Na+ solvation power. Based on the above considerations, PC and DEE with significantly complementary characteristics are selected to function synergistically as solvents in pursuit of integrated electrolyte design (Fig. 1d). Physicochemical property studies of conventional ester and ether solvents. a Schematic illustration of the competition between ester and ether solvents in electrolyte design. b Basic physicochemical properties and c ESP distribution of representative solvents. Among them, the abbreviations DMC, DEC, EMC, and G2 represent dimethyl carbonate, diethyl carbonate, ethyl methyl carbonate and diethylene glycol dimethyl ether, respectively. Colors of elements: H, white; C, gray; O, red. d Comparative analysis of PC and DEE. Source data are provided as a Source data file. Design logic of integrated solvating electrolyte Note that simple blending of PC and DEE is difficult to achieve the desired properties and cannot make full use of their advantages (Supplementary Fig. 3). More importantly, conventional carbonate and ether solvents are volatile and combustible, posing a serious threat to battery safety. Consequently, PFPN is introduced into the integrated electrolyte system to leverage its prominent advantages as follows. Primarily, based on synergistic effect of the condensed phase flame retardant mechanism and free radical trapping mechanism47, PFPN is deemed as an flame retardant on account of abundance of F, N, and P elements, as detailed in Fig. 2b. On the one hand, PFPN can form a dense and sturdy carbon layer when subjected to high temperatures (HTs), effectively isolating oxygen. On the other hand, fluorine, nitrogen and phosphorus free radicals ([F]·, [N]· and [P]·) produced by PFPN can trap active free radicals (such as H· and HO·) in the combustion chain reaction, thereby interrupting the combustion process. Additionally, PFPN decomposition can produce nonflammable gases like N2 and NH3, which dilutes the concentration of combustible gas and reduces the combustion intensity. Besides, PFPN exhibits reduced HOMO and LUMO energy levels compared to those of conventional carbonates and ethers, demonstrating its antioxidant capacity and preferentially involved in SEI formation. Furthermore, ESP analysis of PFPN is performed to elucidate the charge distribution. It can be found that PFPN exhibits a significantly higher ESPmin, and the |ESPmin| is much lower than ESPmax, indicating its non-solvation property. Nevertheless, it can regulate solvation structure through intermolecular dipolar interactions, and a unique anchoring effect has been proposed, which will be elaborated in the following sections. Design concept of dipolar interaction-mediated molecular anchoring electrolyte. a Comparison among conventional dilute electrolytes with weakly solvated ethers, strongly solvated esters, and integrated solvating electrolytes combined with strong, weak and non-solvated solvents. b Schematic diagram of the features of PFPN. Colors of elements: H, white; C, gray; N, blue; O, red; F, cyan; P, pink. c Ionic conductivity of the electrolytes at 25 °C. d, e Electrochemical oxidation and reduction stability of different electrolytes as evaluated by LSV curves at 2.0 mV s−1. f Flammability tests of the electrolytes. Source data are provided as a Source data file. In view of the above factors, an integrated solvating electrolyte was formulated with 0.8 M NaPF6 dissolved in weakly solvated DEE, strongly solvated PC and non-solvated PFPN, denoted as NDPP (Supplementary Fig. 4 and Table 3). Additionally, two control electrolytes have also been proposed, namely ND (0.8 M NaPF6 in DEE) and NP (0.8 M NaPF6 in PC). As illustrated in Fig. 2a, it is anticipated that the developed NDPP electrolyte has several characteristics with nonflammability, intricate intermolecular interactions, and good compatibility with positive and negative electrodes, in sharp contrast to ND and NP electrolytes. Furthermore, the ionic conductivity of ND, NP, NDP, and NDPP electrolytes is 1.44, 6.45, 7.81, and 6.59 mS cm−1, respectively, as displayed in Fig. 2c. The ND electrolyte displays a low ionic conductivity due to weak solvation of DEE. Additionally, oxidation/reduction stability of different electrolytes have also been evaluated via two-electrode and three-electrode linear sweep voltammetry (LSV) measurements (Fig. 2d, e, and Supplementary Fig. 5). As expected, ND and NP respectively show the highest reductive and oxidative stability, while NDPP achieves a delicate balance rather than a single extreme. Compared to NDP, NDPP electrolyte exhibits enhanced anti-oxidative capacity and reduction stability due to the synergy effect involved in PFPN, verifying the effectiveness of PFPN and thus compatibility with high-voltage positive electrodes and negative electrodes. NDP obtained by simply blending PC and DEE still shows unsatisfactory electrochemical stability, which substantiates the indispensable role of PFPN. This result can also be further confirmed by the following electrochemical investigations. Moreover, flammability tests of electrolytes are displayed in Fig. 2f and Supplementary Videos 1–4. Predictably, NDPP electrolyte demonstrates nonflammable properties, attributed to the introduction of flame-retardant PFPN. Whereas ND, NP, and NDP electrolytes are obviously flammable, causing serious security concerns. Decipherment of dipolar interactions Generally, intricate intermolecular interplay involving ion–ion, ion–dipole and dipole–dipole interactions are present in the electrolytes, demonstrating a crucial role in manipulating solvation and interfacial chemistry48,49. To comprehensively understand these interactions, extensive spectral and theoretical investigations were conducted. Fourier transform infrared (FTIR) and Raman analysis of salt, solvents and electrolytes were executed to identify the solvation and intermolecular interactions among various electrolyte components (Supplementary Figs. 6, 7, and Fig. 3a). The Raman peaks around 430 and 807 cm−1 correspond to the free DEE molecules, and their weakening in the NDPP electrolyte indicates the reduced free DEE. Additionally, the blue shift of the coordinated PC and DEE peaks can be observed in the NDPP electrolyte, further implying the reduction of free solvents. Furthermore, there is a strong peak at 728.1 cm−1 in NDPP, assigned to PFPN. Meanwhile, this peak exhibits a red shift compared to pure PFPN solvent, indicating the presence of interactions between PFPN and other electrolyte components (e. g., PF6−, PC, and DEE). The peak appears at 729–744 cm−1 can be attributed to coordinated PF6−. More evidence for the changes in interactions can be elucidated by nuclear magnetic resonance (NMR) investigations. Fig. 3b presents 19F NMR spectra of different electrolytes. From ND, NDPP, NDP to NP, P–F peaks in PF6− shift upfield, which stems from an increase in electron cloud density around F and enhanced shielding effect50. This might be attributed to the weak interaction force between Na+ and PF6− in NP electrolyte, while the relatively strong interaction in ND electrolyte, and the moderate interaction in NDP and NDPP electrolytes. This phenomenon is in agreement with the subsequent theoretical calculation results, specifically, in the ND electrolyte, a relatively greater number of anions are involved in the Na+ coordination than those of NP and NDPP electrolytes, and the NDPP electrolyte demonstrates a balanced coordination of anions and dipoles. To gain deep insights into intricate interactions in NDPP electrolyte, we employed a 2D 1H-19F heteronuclear overhauser effect spectroscopy (HOESY) study51,52. As delineated in Fig. 3c, several distinct cross signals indicate the interactions between PF6− anions and PC or PFPN solvents through δ+H-δ−F. Note that the existence of similar interactions between PFPN molecules can also be observed (Supplementary Fig. 8). In addition, Supplementary Fig. 9 reveals the interactions between PFPN and PC or DEE by 19F NMR peak shifts of PFPN after adding PC or DEE to pure PFPN. Furthermore, interactions among various electrolyte components can be in-depth investigated through theoretical calculations (Supplementary Data 1). Fig. 3d, e, and Supplementary Fig. 10 demonstrate their binding energy calculations with the corresponding optimized structures. Among them, there are relatively strong interactions between PF6− and PFPN or PC through δ+H-δ−F as well as PC-PFPN through δ+H-δ−O, moderate interactions between DEE and PFPN or PF6− through δ+H-δ−F as well as PC-PC through δ+H-δ−O, PFPN-PFPN through δ+H-δ−F, relatively weak interactions between DEE and DEE or PC. Consequently, non-coordinated PFPN in the NDPP system can be activated via dipolar interactions with vulnerable PC, and DEE can be anchored, which ameliorates the solvation environment and interfacial chemistry, conductive to electrochemical improvements. Decryption of intricate dipolar interactions in electrolytes. a Raman spectra of various electrolytes. b 19F NMR spectra of electrolytes. c 2D 1H-19F HOESY NMR spectra of NDPP electrolyte. d Matrix diagram of intermolecular interactions among various electrolyte components. e The evolution of interactions with optimized structures of different complexes. Colors of elements: H, white; C, gray; N, blue; O, red; F, cyan; P, orange. Source data are provided as a Source data file. Identification of electrolyte solvation structures To shed light on the evolution of Na+ solvation structure, classic molecular dynamics (MD) simulations of different electrolyte systems were implemented (Supplementary Data 2), and snapshots are illustrated in Fig. 4a–c. Particularly, their representative solvation configurations with electron distribution through ESP analysis are presented to further elucidate the fundamental ion-solvent chemistry. In these Na+-anion-solvent complexes, negative charges are mainly contributed on the surface of PF6− anions. Additionally, for NP and NDPP electrolytes, stronger affinity between PF6− and PC engenders electron delocalization in the complexes, leading to more scattered charge distribution compared to that in the ND electrolyte. Moreover, distinct solvation configurations with intricate intermolecular interactions have been elaborately depicted in Supplementary Fig. 11. More detailed information about Na+ solvation structures can be obtained by further analysis of radial distribution functions (RDFs) and the corresponding coordination numbers (CNs) from MD simulations, as displayed in Fig. 4d–g. In the ND electrolyte, an initial peak corresponding to Na+-O(DEE) species appears at approximately 2.27 Å while that of Na+-F(PF6−) is located at 2.23 Å. Also, their CN values are calculated as 3.61 and 2.43, respectively. This result may be attributed to the weak solvation capability of DEE and thus lead to the formation of anion-derived EEIs, consistent with previous literature. While in NP electrolyte, initial peaks of Na+-O(PC) and Na+-F(PF6−) are observed at 2.28 and 2.18 Å, respectively, and the corresponding CN of PC is up to 4.48, but that of F in PF6− is only 1.77. Consequently, such a significant difference in CN drives the generation of PC derived organic-dominated EEIs. This phenomenon is in agreement with the strong coordination capability of PC with Na+. Furthermore, for the integrated NDPP electrolyte, initial peaks of Na+-O(PC), Na+-O(DEE) and Na+-F(PF6−) are identified at 2.23, 2.32, and 2.18 Å with CN values of 2.98, 1.61, and 1.68, respectively, indicating competitive coordination of these solvents/anions, which is conducive to enhancing antioxidant capacity of solvent molecules particularly PC and DEE. Meanwhile, there is a negligible initial peak of Na+-N(PFPN), implying that PFPN essentially does not coordinate with Na+. Nevertheless, as aforementioned, the existence of dipolar interactions between PFPN and other solvents/anions can activate the anti-solvent, undoubtedly having a certain impact on the holistic solvation environment. As illustrated in Fig. 4h, the intricate interaction relationship among Na+, solvents and anion in NDPP electrolyte is distinctly demonstrated. Particularly, the coordinate bond generally exists between Na+ cation and PF6− anion. In addition, electrostatic interactions, including ion–dipole and dipole–dipole, are present between electrolyte components (e. g., δ−F in PF6− and δ+H in PC or PFPN), as mentioned earlier in Fig. 3. These findings confirm the variations in interactions and solvation configurations from weakly solvated ND and strongly solvated NP to integrated solvating NDPP electrolytes. Analysis of solvation configurations in electrolytes. Snapshots of MD simulation cells and representative solvation structures with ESP distributions for a ND, b NP, and c NDPP. d–f Calculated RDFs and g CNs of three electrolyte systems. h Schematic diagram of the interaction relationship among Na+, solvents and anion in NDPP electrolyte. Source data are provided as a Source data file. Evaluation of electrochemical properties We proceeded to evaluate the developed electrolytes for long-term electrochemical durability of representative positive electrodes (e. g., NVPOF, NVP, NNMO, and NFPP) and HC negative electrodes. Initially, Fig. 5a demonstrates the first galvanostatic charge-discharge (GCD) profiles of Na||NVPOF half cells with different electrolytes at 0.1 C and room temperature (RT). Compared with ND and NP, the integrated NDPP electrolyte allows for the optimal electrochemical behavior in terms of discharge specific capacity (from 118.07, 118.58 to 123.80 mA h g−1), initial CE (from 80.56%, 77.27% to 92.39%) and EE (from 79.78%, 75.41% to 90.32%). Furthermore, their cycling stability was investigated at 2 C and RT (Fig. 5b). The NVPOF positive electrode in NDPP sustains 87.6% of capacity retention even after 5000 cycles, along with persistently stable CEs. In sharp contrast, there are significant capacity attenuation for Na||NVPOF half cells with ND and NP electrolytes, accompanied by 75.6% and 81.6% of capacity only after 450 cycles, respectively. Meanwhile, GCD curves after different cycles are disclosed in Supplementary Fig. 12, indicating a more stable voltage polarization phenomenon in the NDPP electrolyte. These mainly stem from the restricted PC/DEE free molecules and robust F/N-based electrode/electrolyte interfaces through the introduction of PFPN. Additionally, the evolution of EE during the cycle can be discovered in Supplementary Fig. 13, which further highlights the reliability of the NDPP electrolyte. Moreover, cycling stability was also tested when commercial sodium-based oxide material was applied as the positive electrode in SIBs. Fig. 5c shows charge-discharge curves of Na||NNMO half cells at 0.25 C and cycling performance over 450 cycles at 2 C. Note that the cycling irregularity around 250–300 cycles is caused by the elevated ambient temperature resulting from the unexpected power outage. The higher-load NNFMO positive electrode can also maintain steady operation for 350 cycles at 1 C with 80.5% of capacity retention (Supplementary Fig. 14). Additionally, NVP is also employed as a model positive electrode to further determine the universality of NDPP electrolyte (Supplementary Fig. 15). There is no capacity decline for Na||NVP half cells during 2500 cycles at 10 C and RT, delivering ~93 mA h g−1 of reversible capacity. Evaluation of electrochemical properties. a The first GCD profiles of Na||NVPOF half cells with different electrolytes. Insets are obtained ICE and IEE. b Cycling performance of Na||NVPOF half cells. c–e Cyclic stability of Na||NNMO half cells with NDPP electrolyte at 25, 70 °C and LTs. f Cycling stability of Na||NVP half cells at HTs. Insets are their capacity retentions. g The GCD curves at LTs. h, i Cycling performance of HC||NVPOF full cells. j Cycling stability of HC||NNMO full cells. k Electrochemical curves for HC||NNFMO pouch cells. 1 C is equal to 130, 100, and 119 mA g−1 for NVPOF, NNMO, and NVP electrodes, respectively. Source data are provided as a Source data file. More importantly, the practical feasibility of the integrated NDPP electrolyte under WT conditions was further demonstrated. Initially, the formulated NDPP electrolyte not only remains liquid without salt precipitation after storage at −60 °C, but also still demonstrates good chemical stability at 60 °C, as shown in Supplementary Fig. 16. As expected, Na||NVPOF half cells with NDPP electrolyte display good cycling stability at 5 C and HTs, with 92.4% of capacity retention after 1500 cycles at 50 °C and 90.8% after 500 cycles at 60 °C (Supplementary Fig. 17). Their GCD curves at different cycles are demonstrated in Supplementary Fig. 18a, b, indicating stable and reversible electrochemical behaviors at HTs. When the temperature rises further to 70 °C, the NVPOF positive electrode exhibits a significantly irreversible process when charging and thus low CE (Supplementary Fig. 18c), triggered by severe oxidative decomposition of the electrolyte and side reactions between the electrode and electrolyte. Nevertheless, inferior LT performance can be observed for Na||NVPOF half cells with NDPP electrolyte at −25 and −40 °C (Supplementary Fig. 19), which may be attributed to restricted electronic and ionic conductivities from NVPOF material. Furthermore, Na||NNMO half cells with NDPP can maintain 91.9% of initial capacity over 200 cycles at 5 C and 70 °C, as shown in Fig. 5d. When the Na||NNMO half cells are at LTs, ~83.4 and 68.1 mA h g−1 of reversible capacity can be observed at −40 and −60 °C, respectively (Fig. 5e). Additionally, electrochemical investigations of the NVP electrode at different temperatures were also conducted to further evaluate the WT adaptability of the NDPP electrolyte. Supplementary Fig. 20 and Fig. 5f are its typical GCD curves and good cycling stability at HTs, specifically, Na||NVP half cells exhibit 95.2% and 94.2% of capacity retentions after 1000 cycles at 50 and 60 °C, respectively. Even at 70 °C, 95.2% of capacity can be maintained after 900 cycles. For LT research, unlike NVPOF, NVP is employed due to its relatively higher electronic conductivity. As expected, Na||NVP half cells with NDPP electrolyte deliver 70.2 and 51.2 mA h g−1 of reversible capacity with the upper cutoff voltages of 4.0 and 4.2 V at −40 and −60 °C, respectively (Fig. 5g). Furthermore, cycling stability can also be identified, as shown in Supplementary Fig. 21. These investigations have forcefully proved the feasibility of stable operation of NDPP electrolyte for different positive electrodes even under WTs. In addition to being compatible with various positive electrodes in SIBs, the electrolyte must also cater to the negative electrodes to achieve practical application of full cells. Supplementary Fig. 22 is typical GCD profiles of HC electrodes in different electrolytes. As expected, Na||HC half cell with NDPP demonstrates a moderate reversible capacity close to 320 mA h g−1 at 25 mA g−1 compared to those of ND and NP electrolytes. Furthermore, their electrochemical stability tests were also conducted (Supplementary Fig. 23). Based on the above findings, HC||NVPOF full cells with different electrolytes were assembled, and their electrochemical properties were investigated. Fig. 5h, i, and Supplementary Note 1 show their cycling performance at a low rate. Compared to ND and NP, NDPP electrolyte ensures the more stable operation during the 0.2 C cycle at 25 and 50 °C—about 98.5% and 91.0% of capacity retention after 80 cycles (~761 and 698 h). Besides, the HC||NVPOF full cell delivers 79.1% of capacity retention after 1000 cycles (~737 h) at 2 C (Supplementary Fig. 24 and Table 4). Additionally, the electrochemical stability of HC||NNMO full cells with NDPP was shown in Fig. 5j. There is 91.4% of capacity retention over 250 cycles at RT and 2 C, while 80.9% for 120 cycles at 70 °C and 5 C. Supplementary Fig. 25 is charge-discharge curves of HC||NNMO full cells at −40 and −60 °C, which respectively illustrate the capacities of 76.9 and 59.5 mA h g−1. Furthermore, Na4Fe3(PO4)2P2O7 (NFPP) is also used to substantiate the versatility of NDPP electrolyte (Supplementary Figs. 26–28). More importantly, HC||NNFMO pouch cells were assembled and delivered 1.25 Ah of reversible capacity and 102.8 Wh kg−1 of specific energy at RT. Fig. 5k also shows their discharge curves of LTs (charging at RT and subsequently discharging at LTs). The discharge capacities of 1.05, 0.66, and 0.49 Ah and specific energies of 77.1, 43.1, and 32.3 Wh kg−1 can be obtained at −25, −40, and −60 °C, respectively. These findings substantiate the great adaptability of NDPP electrolyte. Multiscale analysis of interfacial chemistry Interfacial stability plays a crucial role in electrochemical improvement. To evaluate interfacial effects on positive and negative electrodes after cycling in different electrolyte systems, surface morphology of the cycled NVPOF and HC in various electrolytes were characterized by scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) techniques, as displayed in Fig. 6a and Supplementary Figs. 29–31. The NVPOF positive electrode cycled in NDPP electrolyte appears intact without visible fissures. Simultaneously, a thin, compact and smooth CEI layer can be observed with a thickness of only 3.3 nm. These manifest harmful side reactions between the electrode and electrolyte are effectively suppressed. Contrastingly, there are disrupted morphologies and significant microcracks, with thick and nonuniform CEI layers on NVPOF electrodes cycled in ND and NP, which are responsible for their poor CE and electrochemical stability. For the HC negative electrode, when cycling in ND electrolyte, it exhibits better surface morphology with a thinner SEI layer (15.5 nm), verifying better compatibility of weakly solvating electrolyte with HC. Whereas, NP electrolyte demonstrates inferior compatibility with HC electrode, accompanied by distinct microcracks, a thick and nonuniform SEI layer on the electrode surface, which stems from continuous decomposition and accumulation of carbonate solvents. For NDPP electrolyte, moderate compatibility with HC can be obtained with a well-maintained surface morphology through constructing an even and dense SEI layer. These investigations substantiate the effectiveness and feasibility of the integrated electrolyte engineering in collaborative interface regulation and admirable compatibility with positive and negative electrodes for durable SIBs. Interfacial chemistry investigations. a HRTEM images with white dashed lines to outline CEI layers on the NVPOF positive electrodes after 50 cycles at 0.5 C and 25 °C. b XPS spectra of C 1s, O 1s and F 1s, c AFM surface roughness and 3D topography analysis of cycled NVPOF electrodes. d Spatial distribution of selected secondary ion fragments in the CEI on cycled NVPOF electrode with NDPP. e Variation of in situ Raman spectra during the charge-discharge process at 0.3 mV s−1 and 25 °C. f HOMO/LUMO energy levels of solvents, Na+-solvent and Na+-solvent-anion complexes. Colors of elements: H, white; C, gray; N, blue; O, red; F, cyan; P, pink; Na, purple. Source data are provided as a Source data file. To further identify specific chemical compositions of EEIs, we conducted X-ray photoelectron spectroscopy (XPS) analysis of cycled NVPOF and HC electrodes with different electrolytes, as revealed in Fig. 6b and Supplementary Fig. 32. C 1s spectra reveal organic species (e. g., C–C, C–O, and C=O), derived from the decomposition of free solvent molecules (PC, DEE). Additionally, F 1s spectra display two distinct peaks, corresponding to POxFy and NaF, primarily derived from NaPF6 salt. Comparative analysis manifests hybrid organic-inorganic coupling interfaces through the integrated solvating electrolyte design. Besides, the presence of N-containing species in the CEI and SEI layers with NDPP electrolyte is detected from N 1s spectral analysis, demonstrating PFPN involves in interface modulation (Supplementary Fig. 33). Additionally, surface roughness and 3D topography analysis of cycled electrodes with different electrolytes were characterized by atomic force microscopy (AFM), as shown in Fig. 6c and Supplementary Fig. 34. Specifically, the cycled NVPOF electrode in NDPP electrolyte exhibits a notably smoother morphology with a surface average roughness (Ra) of 57.4 nm, compared to those in ND and NP electrolytes (66.6 and 91.4 nm, respectively), consistent with above findings. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) was also employed to explore component distribution in the CEI53,54. Supplementary Fig. 35 and Fig. 6d is the depth profiles and 2D, 3D reconstruction images of CHO2−, NaF2−, and PO2F− fragments on the cycled NVPOF electrode in NDPP, indicating the establishment of a thin, uniform and robust organic-inorganic coupling interface, in align with XPS results. Among them, organic components can promote mechanical strength and flexibility of the interface to effectively alleviate electrode deformation, while inorganic species exhibit high ionic conductivity and electronic insulation, conducive to enhancing interfacial stability55,56. Furthermore, in situ Raman analysis of the Na||NVPOF cell was executed to study the evolution of solvation during the charge/discharge process (Fig. 6e). The electrode surface exhibits characteristic vibration bands around 710, 850, and 950 cm−1, corresponding to the PC and DEE solvents. And the peaks at ~727 and 739 cm−1 can be assigned to PFPN and PF6−, respectively. The peak shift indicates the changes in the solvation structure, the reversible peak shift demonstrates the reversibility of (de-)solvation during the cycle. Additionally, oxidation and reduction properties of electrolytes were calculated to further deduce the interfacial compatibility (Fig. 6f). According to the corresponding HOMO/LUMO energy levels, anti-oxidation stability of solvents is found to follow the sequence of PFPN > PC > DEE, while their anti-reduction stability is PFPN < PC < DEE. The integrated electrolyte demonstrates oxidative stability for high-voltage positive electrodes and compatibility with negative electrodes due to the introduction of PFPN. For Na+-solvent complexes, they exhibit declined HOMO/LUMO energy levels, revealing enhanced anti-oxidation stability and weakened anti-reduction stability. Nevertheless, Na+-solvent-PF6− complexes have moderate redox stability with intermediate HOMO/LUMO energy levels. Overall, hybrid organic-inorganic coupling EEIs rich in F/N can be constructed on electrodes, leading to prominent interfacial and electrochemical stability. Fig. 7 schematically illustrates comprehensive assessments of conventional ND, NP and our designed NDPP electrolytes. Note that ND and NP electrolytes, respectively, show the highest reductive and oxidative stability, while the NDPP electrolyte achieves a delicate balance rather than a single extreme. Consequently, it can induce the formation of stable interfaces on the positive and negative electrodes, demonstrating the optimal interfacial compatibility with both electrodes, which has been confirmed through electrochemical cycling tests and interfacial investigations after cycling. Through multiscale verification, NDPP has also exhibited significant merits in the lifespan, energy efficiency during the cycle and mitigated safety threat. Particularly, solvation and interfacial chemistry play a crucial role in electrochemical properties. For ND electrolyte with weakly solvated DEE, despite relatively better compatibility with the negative electrode, it inevitably exhibits a fragile CEI layer on the positive electrode side, accompanied by severe ether decomposition. For NP electrolyte with strongly solvated PC, there are poor organic-rich EEIs on both electrodes, resulting from unfavorable solvation and parasitic reactions from carbonate degradation. For the integrated electrolyte, combined strongly solvated PC, weakly solvated DEE and non-solvated PFPN, robust EEIs rich in F/N can be constructed on electrodes, mainly attributed to the preferential decomposition of PFPN and unique solvation configuration with modulated ion–dipole and dipole–dipole interactions through molecular anchoring effect for abundant free solvents in the dilute electrolyte. More importantly, NDPP electrolyte endows SIBs with great potential in WT applications. Nevertheless, persistent efforts, including multiscale in situ techniques and theoretical simulations, are still highly demanded to further deepen the understanding of the proposed “molecular anchoring-solvation configuration-interfacial chemistry” structure-property relationship through quantitative descriptors or models. Schematic diagram of the comprehensive assessment of different electrolytes in SIBs. a ND. b NP. c NDPP. Discussion In conclusion, we have proposed a dipolar interaction-mediated molecular anchoring electrolyte integrated strongly solvated carbonate ester (PC), weakly solvated ether (DEE) and non-solvated PFPN for safe and durable SIBs. The electrolyte demonstrates a hierarchical solvation with abundant δ+H-δ−F and δ+H-δ−O dipolar interactions among PF6− anions and solvent molecules, especially PFPN, which activates non-coordinated PFPN and restricts free PC/DEE molecules. Multiscale experimental and theoretical investigations have manifested the integrated NDPP electrolyte enables to substantially alleviate solvent degradation at the electrodes, facilitate the construction of robust EEIs rich in F/N on both positive and negative electrodes, and ultimately promote comprehensive electrochemical improvements, compared with conventional ND and NP electrolytes. Particularly, the electrolyte features electrochemical stability and reversibility. For Na||NVPOF half cells in NDPP, a significantly improved capacity retention up to 87.6% can be obtained even after 5000 cycles with enhanced CEs and EEs. Through matching with representative HC negative electrode, the assembled HC||NVPOF full cells demonstrate prominent cycling stability. Furthermore, NDPP electrolyte is also well adaptable to commercial NVP and NNFMO electrodes, particularly, sustaining stable operation of NVP positive electrode over a WT range from −60 to 70 °C. Strikingly, 95.2% of capacity retention can be observed after 900 cycles at 70 °C, and reversible capacities of 70.2 and 51.2 mA h g−1 can be maintained at −40 and −60 °C, respectively. The HC||NNFMO pouch cells also substantiates the LT applicability of the optimized electrolyte (0.66 Ah at −40 °C). This work involving a dipolar interaction-mediated molecular anchoring electrolyte design provides an encouraging avenue for the advancement of high-quality SIBs in wide-temperature environments. Methods Materials NaPF6 (≥99.8%) and DEE (≥99.9%) were purchased from DoDo Chem. PC (≥99%) and PFPN (≥98%) were purchased from Sigma-Aldrich and Aladdin, respectively. The solvents were dried by the activated 4 Å molecular sieves for 72 h before use. ND and NP electrolytes were prepared by dissolving 0.8 M NaPF6 in DEE or PC, respectively. NDP electrolyte was prepared by dissolving 0.8 M NaPF6 to DEE: PC with a volume ratio of 1:1. NDPP electrolyte was prepared by dissolving 0.8 M NaPF6 to DEE: PC: PFPN with a volume ratio of 5:5:2. All the preparation procedures were conducted in an argon-filled glovebox with O2 and H2O content below 0.1 ppm. The NVPOF material was prepared via a typical hydrothermal method57. Specifically, V2O5 (Macklin, 99%) and H2C2O4 (Sinopharm Chemical Reagent Co., Ltd., 99.5%) at a molar ratio of 1:3 were dissolved in distilled water while stirring at 70 °C for 1 h. Then, stoichiometric NH4H2PO4 (Aladdin, 98.5%) and NaF (Aladdin, 98%) were added to the above-mentioned solution while stirring continuously. Ammonium hydroxide was used to alter the pH of the solution to 7.00 ± 0.05. After that, it was placed in a Teflon-lined autoclave and heated to 170 °C for 12 h, with natural cooling outside the oven. Finally, the NVPOF products was washed multiple times with distilled water before being dried in a vacuum oven at 80 °C and collected. The NFPP material was prepared by a mechanical ball milling-assisted calcination method. Firstly, stoichiometric FeC2O4·2H2O (Macklin, 99%), NH4H2PO4 (Aladdin, 98.5%) and CH3COONa (Macklin, 99%) were weighed and then placed into a ball-milling jar. Citric acid (Macklin, ≥99.5%) was used as the carbon source, weighed according to a molar ratio of transition metal to citric acid (1:0.5), and added to the jar. Subsequently, the ball-milling beads were weighed and added at a ball-to-material mass ratio of 25:1. Anhydrous ethanol was used as the solvent, and the mixture was ball-milled in a planetary ball mill at 500 rpm for 12 h. The resultant slurry was then subjected to rotary evaporation to obtain the precursor sample. After grinding, it was pre-calcined at 350 °C for 4 h under an argon atmosphere. After cooling to RT, it was sintered at 550 °C for 8 h under an argon/hydrogen mixed atmosphere to obtain the NFPP material. The NVP and NNMO materials were obtained from Youyan Technology Co., Ltd. The sodium layered oxide positive electrode (NNFMO) was purchased from Canrd Technology Co., Ltd. The commercial HC negative electrode material was purchased from Kuraray China Co., Ltd. Material characterizations Ionic conductivities of the electrolytes were determined by a portable conductivity measuring meter (DDBJ-351L, Leici). Flammability tests of the electrolytes were carried out by igniting the electrolyte-soaked glass fiber separators in the fume hood. To reveal structural details and solvation environments of salts, solvents, and electrolytes, Raman measurements were performed with a 532 nm laser. FTIR (Thermo Fisher, NICOLET iS50) data were also collected from 4000 to 400 cm−1. The NMR (Bruker AVANCE NEO 500) technique was applied to further analyze the solvation characteristics and intermolecular interactions of the electrolytes. 1H NMR spectra were recorded at 600 MHz in DMSO-d6, the 19F NMR spectra were recorded at 565 MHz in DMSO-d6. Specific morphological features of the cycled electrodes were obtained through SEM (HITACHI SU8010) and HRTEM (JEOL-2100F, 200 kV) images. The cells were disassembled in the Ar-filled glovebox, of which the electrodes were rinsed with the corresponding electrolyte solvent three times and dried under vacuum. Furthermore, surface and interfacial compositions of the cycled electrodes can be characterized by XPS (VG Scientific with 300 W Al Kα source) measurements. All values of binding energy were referenced to the C 1s peak of carbon located at 284.8 eV. AFM (Bruker MultiMode 8) images were also employed to further investigate the surface morphology and roughness of the cycled electrodes. TOF-SIMS (TOF.SIMS5) of the cycled electrodes was conducted with at Bi3+ 30 keV energy and 60 nA current to reveal the chemical compositions and distributions in detail, and the analysis area is 50 × 50 μm2. Electrochemical measurements The electrochemical properties of the prepared materials were characterized in 2032-type coin cells. The NVPOF positive electrode containing NVPOF material, carbon black (Canrd) and carboxymethyl cellulose sodium (CMC2200, DoDo Chem) at the weight ratio of 7:2:1 was prepared by spreading the aqueous slurry on carbon-coated Al foil as the current collector. Similarly, the NVP (or NNMO) positive electrode was obtained by blending NVP (or NNMO) power, Ketjen black (Canrd) and polyvinylidene fluoride (PVDF, average Mw 1000000, DoDo Chem) with a weight ratio of 8:1:1 in N-methylpyrrolidone (NMP). In addition, the NFPP positive electrode and HC negative electrode were prepared by mixing the active materials, carbon black and PVDF at the weight ratio of 7:2:1 in NMP, and then the slurries were coated on carbon-coated Al foils. All working electrodes were coated on one side and dried at 100 °C under vacuum overnight. The active mass loading of these electrodes is in the range from 1.2 to 1.5 mg cm−2. For the purchased NNFMO electrode from Canrd, the active mass loading is about 8.0 mg cm−2. The sodium-ion half-cells are assembled in an Ar-filled glovebox. For the preparation of the sodium metal electrode, take the sodium block from kerosene and trim off the oxidized layer to expose the fresh, metallic-sheen sodium. Roll it into a uniform, 1–2 mm thick sheet using an iron rod. All electrodes were cut into circular pieces with a diameter of 12 mm. A 16 mm diameter Glass filter (Whatman 934AH, 0.435 mm thick) was used as the separator for all batteries. GCD tests were conducted on the Neware battery test system. LSV tests of the electrolytes were performed in the Na||stainless steel (SS) half cells from open circuit voltage to 0.0 or 6.0 V at a scanning rate of 2.0 mV s−1. For full-cell fabrication, all HC negative electrodes were pre-sodiated chemically, and the N/P ratio was controlled at about 1.2. Specifically, drop ~60 µL electrolyte on the sodium metal, and then cover the sodium metal on the HC electrode to ensure the metallic sodium is in complete contact with the HC electrode, keeping this state for 3–7 h to complete the pre-sodiation of the HC electrode. For pouch cells, an external pressure of approximately 0.1–0.2 MPa was applied during the cell testing process. The dried cells were transferred to an Ar-filled glovebox for electrolyte injection and left to stand for the full infiltration of electrolyte. Then the cells were evacuated and sealed, further underwent the charging and formation, followed by vacuum puncturing to expel the gas, and then sealing was carried out before electrochemical tests. All parameters for the HC||NNFMO pouch cells were disclosed in Supplementary Table 5, including cell capacity, cell weight, specific energy, cell components, N/P ratio, number of layers, and electrolyte-to-capacity. The electrochemical tests at 50, 60, 70, −25, −40, and −60 °C were performed in the temperature-controlled ovens or freezers. Computational details Based on the molar ratio of each component in the electrolytes, appropriate electrolyte boxes (ND: 15 NaPF6 + 134 DEE, NP: 15 NaPF6 + 221 PC, NDPP: 15 NaPF6 + 56 DEE + 92 PC + 18 PFPN) were constructed. Their MD simulations were further carried out by using the Forcite package with COMPASS Ⅱ force field. During the whole simulation process, these electrolyte systems successively underwent equilibration under the NPT and NVT ensembles. Both of the two equilibration steps last for 50 ps with a 1 fs timestep and ultra-fine quality. And the simulated temperatures were maintained at 298 K by utilizing the Berendsen and Nose thermostats, respectively. DFT calculations for the salt, solvents and Na+-solvent complex molecules were implemented using the Dmol3 package with the Perdew–Burke–Ernzerhof functional of generalized gradient approximation method. The binding energy of different Na+-solvent complex molecules were conducted by using the Forcite package. The binding energy was defined as58: Eb = E[Na-solvent]+ − ENa+ − Esolvent, where E[Na-solvent]+ is the energy of the Na+-solvent complex, Esolvent is the energy of the solvent molecule, and ENa+ is the energy of the sodium ion. Furthermore, the additional DFT calculations for dipolar interactions between solvent and solvent or anion were performed using the Gaussian software59 at B3LYP/6-311 + G(d,p) level of theory and with Grimme’s-D3 (gd3bj) dispersion correction to obtain the corresponding optimized coordination structures and thereafter to calculate the binding energies. Supplementary information Supplementary Information Description of Additional Supplementary Files Supplementary Data 1 Supplementary Data 2 Supplementary Video 1 Supplementary Video 2 Supplementary Video 3 Supplementary Video 4 Transparent Peer Review File Source data Source data Acknowledgements We acknowledge the financial support from the National Key Research and Development Program of China (2023YFE0202000), National Natural Science Foundation of China (No. 52502221 and 52472089), Natural Science Foundation of Jilin Province (No. 20250101013JJ), and National Postdoctoral Program for Innovative Talents (No. BX20240062), Fundamental Research Funds for the Central Universities (No. 2412025QG001). Author contributions Y.-L.H., Z.-Y.G., and X.-L.W. conceived the idea and designed the experiments. Y.-L.H. performed the material characterizations and electrochemical measurements with assistance from Z.-Y.G., H.-H.L., X.-T.W., and S.-Y.L. J.W. contributed to the NMR tests. Y.-Z.T. provided support in the field of theoretical calculations. Y.-L.H. analyzed the data and prepared the paper with contributions from all authors. Peer review Peer review information Nature Communications thanks Jian Peng and the other anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available. Data availability The authors declare that all the relevant data within this paper and its Supplementary Information file are available from the corresponding author upon request. Source data are provided with this paper. Competing interests The authors declare no competing interests. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Contributor Information Zhen-Yi Gu, Email: guzy166@nenu.edu.cn. Xing-Long Wu, Email: xinglong@nenu.edu.cn. Supplementary information The online version contains Supplementary material available at 10.1038/s41467-026-71861-7. References Associated Data Supplementary Materials Supplementary Information Description of Additional Supplementary Files Supplementary Data 1 Supplementary Data 2 Supplementary Video 1 Supplementary Video 2 Supplementary Video 3 Supplementary Video 4 Transparent Peer Review File Source data Data Availability Statement The authors declare that all the relevant data within this paper and its Supplementary Information file are available from the corresponding author upon request. Source data are provided with this paper.