A deep learning-based fusion framework for robust fine-grained classification of sea turtles in support of marine biodiversity Authors: Parkpoom Chaisiriprasert, Apicha Deearom, Yaseen Ahmed Al-Mulla, Yaseen Ahmed Al-Mulla, Yaseen Ahmed Al-Mulla, Yaseen Ahmed Al-Mulla, Yaseen Ahmed Al-Mulla Published: 2026 ABSTRACT Accurate classification of sea turtle species is crucial for ecological monitoring and conservation, yet traditional visual classification methods remain limited by underwater imaging challenges such as occlusions, poor lighting, and background noise. To address these limitations, we propose an enhanced deep learning-based classification framework that integrates both color and structural features to improve the robustness of species recognition in complex marine environments. Building upon the ResNet-50 backbone, we introduce a four-channel input tensor comprising RGB data and Sobel-filtered edge maps, capturing both semantic and morphological information. Two novel fusion modules, LiteAFNet and AlphaBlendNet, are designed to integrate these features effectively. LiteAFNet leverages a lightweight attention mechanism to highlight discriminative regions, while AlphaBlendNet adaptively balances RGB and edge cues based on spatial context. Experimental results demonstrate significant improvements in classification performance across all evaluation metrics. Specifically, AlphaBlendNet achieves the highest precision (0.84), recall (0.88), F1-score (0.86), and mean average precision (mAP) of 87.2%, outperforming both the baseline fusion and LiteAFNet configurations. These results indicate that integrating color histograms with structural edge features enhances the model’s ability to distinguish between species with similar visual traits. This framework offers a scalable, accurate, and automated solution for underwater species classification and holds potential for broader application in marine biodiversity monitoring. 1. Introduction Marine biodiversity plays a vital role in maintaining ecological balance, with sea turtles being among the most iconic and ecologically significant marine species. Accurate identification of sea turtle species is essential for population monitoring, conservation strategies, and environmental research. Traditional classification approaches rely heavily on expert visual inspection, which is time-consuming, labor-intensive, and prone to human error particularly in underwater environments where lighting conditions, occlusions, and complex backgrounds hinder visual clarity. As sea turtle populations face increasing threats from habitat degradation, pollution, and climate change, there is a growing need for automated, scalable classification systems that can assist in large-scale ecological monitoring. Convolutional neural networks (CNNs), especially architectures such as ResNet-50, have demonstrated strong performance in image classification. These models learn deep hierarchical features, allowing them to recognize complex visual patterns. However, when trained solely on RGB images, they often struggle with fine-grained classification tasks such as differentiating sea turtle species with similar shapes and shell textures particularly in underwater conditions where color distortion and loss of detail are common. These limitations highlight the need to enhance input representations to capture more discriminative features. To address this, a classification framework is proposed that integrates two complementary visual cues: color and edge structure. Color histograms provide a global representation of chromatic distribution, aiding in distinguishing species with unique pigmentation. In parallel, Sobel filtering extracts edge maps that highlight morphological contours and fine structural details. These features are combined into a four-channel tensor consisting of RGB and edge information, enriching the model’s input with both semantic and structural content. Two fusion modules, LiteAFNet and AlphaBlendNet, are introduced to integrate these cues effectively. LiteAFNet uses a lightweight attention mechanism to emphasize key regions, while AlphaBlendNet adaptively blends RGB and edge features based on spatial context. Both modules are embedded into the ResNet-50 backbone, enhancing its ability to process enriched input and improving robustness in underwater image classification. This framework offers a practical direction for automatic sea turtle species recognition under real-world marine imaging conditions. To contextualize the proposed framework, it is essential to examine existing work in marine species classification, image preprocessing, and multimodal fusion. Recent literature has explored a variety of deep learning architectures tailored to underwater visual challenges, as well as preprocessing pipelines designed to enhance low-quality marine imagery. Moreover, the integration of attention-based fusion techniques has emerged as a critical factor in improving model robustness and interpretability under complex aquatic environments. The following sections provide a structured review of these contributions, categorized into three domains: species classification, image enhancement, and fusion architecture. 1.1. Species classification Foundational CNN-based pipelines established baselines for ecological image recognition and general visual classification [1,2]. Subsequent work automated cetacean photo-ID via contour extraction and species-distinctive cues including Risso’s dolphins and introduced standardized protocols for striped dolphins that facilitate automated workflows [3–5]. Deep detectors have been applied to sharks [6], and cross-domain evidence (e.g., mosquito larvae) highlights portability of image-based bio-ID workflows [7]. A systematic review consolidates machine learning and imaging methods for cetacean photo-ID [8], while modern detectors (YOLO-NAS/YOLOv8) show consistent performance for sea-lion detection under diverse field conditions [9]. Short reviews on fish classification outline architecture choices and data requirements [10]. For sea turtles, works span individual ID from postorbital keypoints [11], drone-based detection [12], and temporal learning for ecological data streams [13]. Recent applications include coastal green-turtle counting and tourism-facing conservation aids using deep learning [14,15]. Fine-grained/small-object scenarios leverage super-resolution with improved YOLOv8 for hermit crabs [16] and fused features with LIME-based interpretability for plankton [17]; related pipelines target marine microplastic characterization [18]. Robustness in underwater videos is improved via enhanced CNNs and motion-aware approaches for fish detection [19,20], while transfer learning and modern detectors enable multi-class recognition on limited datasets [21,22]. Species distribution modeling (SDM) adds environmental context for cetaceans and turtles [23]. At scale, improved feature alignment, template matching, UAV-oriented feature extraction, and database-level AI matching support re-identification in field data [24–27]. 1.2. Image enhancement and preprocessing techniques Underwater imagery typically suffers from color cast, haze/turbidity, low contrast, and noise, making preprocessing critical. Relevant components include feature-recognition algorithms and efficient edge extraction (e.g., parallel Canny/Sobel) to stabilize contours prior to learning [28,29]. Color-balanced histogram equalization and denoising-aware Sobel formulations sharpen boundaries while preserving textures [30,31]. Contemporary enhancement leverages multi-task fusion strategies [32] and synthesizes color-correction practices via systematic review [33]. Retinex-based networks improve visibility in low-light/turbid scenes [34]. Insights from adjacent domains (e.g., crack detection) inform preprocessing blocks that preserve fine textures essential for marine cues [35]. 1.3. Fusion architectures and attention mechanisms Attention-centric fusion improves cross-modal integration and interpretability. Transformer-style global context complements CNN attention modules such as CBAM, SE, and ECA, enabling adaptive saliency weighting and channel efficiency [36–40]. Lightweight/high-resolution backbones (Lite-HRNet) and split-attention networks (ResNeSt) balance accuracy with compute constraints [39,41]. Relational and cross-modal attention in person re-ID and RGB-D saliency demonstrates transferable patterns for marine settings [42,43]. Residual/semantic-aware designs (RFN-Nest, THFuse) and unified/unsupervised frameworks (U2Fusion) show that hybrid global–local mixing preserves structure under adverse conditions [44,45,46]. Underwater-specific pipelines (ACCDF) and “fusion-in-the-loop” strategies tailor fusion to downstream tasks [47,48]. Global–local networks for underwater enhancement (GL-Net with compressed-histogram equalization) illustrate benefits of hierarchical attention and contrast normalization in submerged scenes [49]. For fine-grained classification, pairwise/self-refining attention, dynamic convolution, and attention-pyramid pooling strengthen discriminability on subtle cues [50–52]; multi-scale/multi-attention designs in complex scenes offer lessons for cluttered marine environments [53]. Dual-attention fusion (SDAM) and cross-modal global-awareness designs (RGB–Thermal) address domain shift and heterogeneous sensing, supporting robust and scalable field deployment [54,55]. Evidence gap. End-to-end evaluations that jointly optimize enhancement–fusion–classification under heterogeneous sensing (UAV/subsurface) and variable underwater quality remain scarce, limiting cross-context transferability and field robustness. 2. Materials and methods 2.1. Data collection A dedicated image dataset of sea turtles was assembled to support the development of an automated fine-grained species classification model for marine biodiversity monitoring. Images were collected from publicly available repositories, including Roboflow and seaturtle.org. Each image is accompanied by an annotation file specifying the species label and bounding box coordinates for the annotated turtle, which were used for downstream processing. No pre-computed feature vectors were used; feature representations were learned directly from the raw images, and no feature dimensionality reduction (e.g., PCA) was performed. The final dataset comprises high-resolution images of seven sea turtle species: Green Turtle (Chelonia mydas), Hawksbill Turtle (Eretmochelys imbricata), Leatherback Turtle (Dermochelys coriacea), Flatback Turtle (Natator depressus), Loggerhead Turtle (Caretta caretta), Olive Ridley Turtle (Lepidochelys olivacea), and Kemp’s Ridley Turtle (Lepidochelys kempii). The selection criteria focused on the presence of identifiable carapace patterns, as the shell morphology provides essential visual cues for differentiating between species. The dataset emphasizes dorsal (top-down) views of the carapace but also includes lateral perspectives to capture variations in shell curvature and edge profile. A particular effort was made to include images taken under diverse real-world conditions, including underwater environments with different lighting intensities, shadow effects, and background complexity. These variations are critical in simulating realistic field scenarios where visibility may be affected by water clarity, light refraction, or camera angle. Fig 1 illustrates representative examples from each class, showcasing the diversity in shell patterns and imaging conditions. This visual reference serves to emphasize both inter-class variation and the challenges posed by underwater image variability. Examples of sea turtle species from the dataset. Images A to G correspond to: (A) Green, (B) Hawksbill, (C) Leatherback, (D) Flatback, (E) Loggerhead, (F) Olive Ridley, and (G) Kemp’s Ridley. To improve the dataset’s variability and robustness, a data augmentation process was applied. Standard image augmentation techniques were employed, including random rotation, scaling, and horizontal flipping. These transformations helped to synthetically increase the number of samples and expose the classification model to a broader range of feature variations related to posture, viewpoint, and lighting. After augmentation, the full dataset comprised 913 images. The dataset was then partitioned into three subsets: 70% for training (638 images), 20% for validation (183 images), and 10% for testing (92 images). The test set was constructed to be mutually exclusive from the training and validation sets and was designed to ensure class balance, with each of the seven species represented equally (14 images per class) as shown in Table 1. Image distribution across sea turtle species. This partitioning strategy ensured fair and rigorous evaluation of the model’s generalization performance. 10.1371/journal.pone.0344942.t001Table 1Image distribution across sea turtle species.Sea Turtle SpeciesimagesGreen (Chelonia mydas)210Hawksbill (Eretmochelys imbricate)165Leatherback (Dermochelys coriacea)128Flatback (Natator depressus)100Loggerhead (Caretta caretta)110Olive ridley (Lepidochelys olivacea)100Kemp’s ridley (Lepidochelys kempii)100Total913 Image distribution across sea turtle species. Although the dataset was designed to capture broad inter-class variation and realistic underwater imaging conditions, its overall size remains relatively small compared with large-scale visual benchmarks. To address potential overfitting and enhance model reliability, extensive data augmentation was applied, including random rotation, flipping, cropping, and color jittering. In addition, a stratified 5-fold cross-validation protocol was implemented during training and evaluation, ensuring balanced representation of all seven species in each fold. This strategy allowed every image to contribute to both training and validation phases across iterations, providing a more reliable estimation of the model’s generalization performance despite the limited dataset size. 2.2. Proposed method A classification framework is proposed to facilitate sea turtle species identification by leveraging both color and edge-based visual features extracted from input images. As illustrated in Fig 2, the pipeline is organized into three stages: 1) input and preprocessing, where RGB images are converted into Sobel edge maps and color histograms; 2) feature fusion and backbone encoding, where the four-channel tensor (RGB + Sobel) and histogram branch are integrated by a chosen fusion module (Identity, LiteAFNet, or AlphaBlendNet) and passed to the modified ResNet-50; and 3) end-to-end training and testing, where the fused representation is optimized with cross-entropy loss during training and used to generate species predictions during testing. This design improves discriminative power under challenging underwater conditions, particularly when distinguishing between morphologically similar species. Overview of the proposed sea turtle classification framework. 2.2.1. Sobel filtering. The Sobel operator is a classical method used for edge detection in image processing. It operates by approximating the gradient of image intensity to highlight regions of high spatial frequency, which correspond to object boundaries or structural transitions. This technique is particularly useful for enhancing morphological cues such as the outlines of a sea turtle’s carapace, ridges, and scute-division patterns that are often key to species identification. Its lightweight, parameter-free formulation provides stable gradients with minimal tuning, yielding more consistent edges than threshold-sensitive Canny and less noise amplification than Laplacian/LoG in underwater imagery. Sobel filtering computes gradients in the horizontal and vertical directions using two 3 × 3 convolution kernels. The horizontal (Gx) and vertical (Gy) Sobel kernels are defined as: These kernels are convolved with a grayscale version of the input image to compute intensity changes along the x-axis and y-axis, respectively. The gradient magnitude G at each pixel is then calculated as: Alternatively, for computational efficiency in digital systems, an approximate gradient magnitude may be computed as: This operation produces an edge map that emphasizes regions with strong brightness transitions, corresponding to physical edges in the image. In the context of sea-turtle imagery, Sobel filtering enhances the visibility of shell contours and fine structural patterns that might otherwise be obscured by lighting variations, water turbidity, or underwater distortion. The resulting edge map is normalized and then used as an additional modality in our pipeline: it is combined with the RGB image and passed to the subsequent tensor-encoding and fusion stages. The same Sobel-based preprocessing is applied consistently during both the training and testing phases to ensure that the network receives homogeneous input distributions. 2.2.2. Color histogram selection. Color histograms are one of the most fundamental representations for describing the color distribution within an image. In the context of sea turtle classification, color information is often a key discriminative feature, as different species tend to exhibit characteristic pigmentation patterns and shell tones. Color histograms offer a statistical summary of color usage across an image, making them robust to minor geometric distortions and spatial translations. In this study, histograms were computed in the RGB color space, where each channel (Red, Green, and Blue) was processed separately. For each image, the intensity ranges of each channel (typically 0–255) was quantized into a fixed number of bins. A bin represents the count of pixels whose intensity falls within a specific subrange. The number of bins selected for each channel was empirically determined to balance granularity and computational efficiency; in this case, 32 bins per channel were used, resulting in a 96-dimensional feature vector per image. Formally, for a given channel C∈{R,G,B}, the histogram HC can be defined as: where HC(i) represents the number of pixels in bini, and C(x,y) denotes the intensity of channel C at pixel position (x,y). To ensure consistency across varying image sizes, each histogram was normalized such that the sum of all bin values equals 1: where N is the total number of bins. This normalization allows for direct comparison between images and reduces the influence of image scale. The extracted color histograms serve not only as a global descriptor of image content but also aid in species differentiation by emphasizing pigmentation characteristics. This technique is particularly useful in underwater conditions, where color degradation may affect local features but global color trends remain partially preserved. 2.2.3. Tensor encode. In the proposed framework, each input sample is represented as a tensor that encodes both chromatic and structural information from the original image. The goal of this encoding process is to enrich the input representation with complementary features prior to feeding it into the classification network. The encoding begins by converting the input image into two separate data streams: the standard RGB image and the corresponding edge map obtained through Sobel filtering. The RGB image contains three channels representing the red, green, and blue color intensities, which capture the global color distribution and visual appearance of the sea turtle. The Sobel filter is applied to a grayscale version of the image to produce a single-channel edge map, which highlights morphological boundaries such as shell ridges and scute outlines. These two components are then concatenated along the channel axis to form a four-dimensional input tensor with shape (C = 4,H,W), where 𝐶 denotes the number of channels (three RGB + one edge), and 𝐻 and 𝑊 represent the height and width of the image, respectively. This concatenated tensor serves as the unified input to the fusion module, allowing the model to jointly process color and edge cues during feature extraction. To ensure consistency across the dataset, all images are resized to a fixed resolution prior to tensor construction. Additionally, normalization is applied channel-wise to scale pixel values to a standard range, facilitating stable convergence during training. This tensor encoding strategy enables the model to receive enriched visual input that reflects both appearance and shape characteristics, which is especially beneficial in distinguishing between sea turtle species with similar coloration but differing shell morphology. 2.2.4. Fusion strategy. To enhance the integration of color and edge features in the classification pipeline, two fusion strategies were introduced in this study: LiteAFNet and AlphaBlendNet. These modules operate at the early stage of the network, where the concatenated RGB and Sobel edge inputs are processed before being passed to the backbone classifier. While both methods aim to improve feature representation by incorporating multi-modal information, they differ in terms of their fusion mechanism and design philosophy. Fig 3 illustrates the operational pipeline of the Identity Fusion strategy, which serves as the baseline configuration in this study. In this scheme, RGB images, Sobel edge maps, and color histograms are encoded independently and then concatenated to form a fused feature map without any additional fusion mechanism or adaptive weighting. This fused tensor is then forwarded directly to the ResNet-50 backbone. The design is intentionally simple, providing a reference point for evaluating the benefits of more sophisticated fusion approaches. Operational Pipeline of Identity Fusion (Baseline). The rationale for introducing fusion at the input stage stems from the observation that early integration allows the network to learn interactions between color and structure from the very beginning of the feature extraction process. This is particularly important for visual recognition tasks involving fine-grained categories, such as sea turtle species, where subtle differences in texture, tone, and shape must be jointly interpreted. By fusing the modalities prior to entering the backbone, the network can construct more expressive low-level features that benefit downstream layers in the classification hierarchy. Furthermore, the two fusion modules were designed with different trade-offs in mind. LiteAFNet prioritizes simplicity and computational speed, making it suitable for scenarios that require real-time inference or deployment on edge devices with limited resources. In contrast, AlphaBlendNet emphasizes adaptability and context sensitivity, enabling the model to make spatially-aware decisions when integrating RGB and edge information. This dual design provides flexibility in selecting an appropriate fusion strategy based on deployment constraints or target environments, while maintaining a shared objective of enhancing the network’s discriminative capacity through early-stage feature enrichment. 2.2.4.1 LiteAFNet. LiteAFNet is introduced as a lightweight, attention-based fusion module that enhances salient visual cues while minimizing computational overhead. The core objective of this module is to allow the network to automatically determine which regions within the combined RGB and Sobel-edge representation are most informative for classification. Fig 4 illustrates the operational pipeline of LiteAFNet. After separate encoding of RGB, Sobel edge, and color histogram input, the resulting 4-channel tensor is passed through a 1 × 1 convolutional layer followed by a sigmoid activation, producing an attention map A. This attention map has the same spatial dimension as the input and serves to modulate the fused features via element-wise multiplication. Operational Pipeline of LiteAFNet. Formally, let Iinput∈R4×H×W represent the fused RGB and edge input. The attention map A is computed as: where σ(⋅) denotes the sigmoid activation function and A∈[0,1]4×H×W. The attention map is then applied to the input via element-wise multiplication: where ⊙ represents element-wise multiplication. The resulting tensor Ifused is passed to the backbone network for further feature extraction. This attention mechanism functions as a soft gating unit, enabling the network to emphasize informative spatial regions and suppress less relevant ones based on learned patterns. Importantly, since the gating is performed using only a shallow convolutional layer, the computational cost is minimal making it particularly well-suited for real-time applications or deployments on edge devices. One of the key strengths of LiteAFNet lies in its architectural simplicity. The use of a single convolutional layer and a non-linear gating function results in a minimal number of additional parameters and negligible computational overhead. This makes the module particularly suitable for applications with real-time constraints or limited hardware resources, such as embedded systems or field-deployable marine monitoring devices. Moreover, LiteAFNet encourages early-stage spatial attention across both color and edge modalities, helping the network focus on discriminative regions such as shell ridges, scute boundaries, or high-contrast patterns without requiring deeper layers to learn these associations from scratch. This early guidance can accelerate convergence during training and improve generalization, especially in datasets where relevant features are localized. 2.2.4.2 AlphaBlendNet. AlphaBlendNet introduces an adaptive, context-aware fusion mechanism that differs significantly from uniform or static fusion approaches. Rather than treating all input channels equally, the model dynamically learns to blend RGB and edge information on a per-pixel basis, guided by the local spatial context. This enables the network to emphasize the most relevant visual cues such as edges, textures, or color distributions depending on the region of the image. Fig 5 illustrates the operational pipeline of AlphaBlendNet. After encoding the RGB image and Sobel edge map, the two are concatenated to form a 4-channel tensor. This fused representation is processed by a 1 × 1 convolution followed by a sigmoid activation to generate an alpha map α, which assigns blending weights ranging from 0 to 1 for each spatial location. Operational Pipeline of AlphaBlendNet. The process begins with the concatenation of the RGB tensor Irgb∈R3×H×W and the edge tensor Iedge∈R3×H×W, forming a 4-channel tensor. This input is processed by a 1 × 1 convolution followed by a sigmoid activation to generate the alpha map: To perform blending, the edge tensor is broadcast (expanded) to match the shape of the RGB tensor, resulting in Iedge↑ ∈R3×H×W. The final fused output is computed as a weighted sum: Optionally, the original edge map can be concatenated back to Iblend to preserve explicit structural cues, resulting in a 4-channel tensor that is passed into the backbone. This adaptive blending strategy allows AlphaBlendNet to modulate attention across RGB and edge channels based on spatial relevance. It excels in fine-grained classification tasks such as distinguishing between sea turtle species where subtle differences in shell curvature, scute boundaries, and color tone carry significant semantic weight. Unlike LiteAFNet, which applies a uniform attention map across the entire input tensor, AlphaBlendNet per-pixel weighting enables finer control over localized feature integration. Although this added flexibility incurs a slightly higher computational cost, the benefits in representational precision and improved discriminative power justify its use in contexts where accuracy is prioritized over inference speed. 2.2.5. ResNet-50 and Modification. In this study, ResNet-50 is adopted as the backbone for feature extraction due to its proven capacity to learn deep hierarchical features while maintaining stable training through residual connections. As illustrated in Fig 6, the architecture begins with a 7 × 7 convolution followed by batch normalization, ReLU activation, and max pooling (Stage 0), which prepares the input by reducing spatial resolution and expanding the receptive field. The core structure is composed of four stages (Stage 1 to Stage 4), each consisting of multiple bottleneck blocks. Each block applies a 1 × 1 convolution for dimensionality reduction, a 3 × 3 convolution for spatial processing, and a final 1 × 1 convolution to restore channel dimensions. Identity-based skip connections are integrated to preserve gradient flow and improve training efficiency. ResNet-50 architecture. Across the network, the spatial resolution of feature maps decreases progressively (from 56 × 56–7 × 7), while the number of channels increases significantly, reaching 2048 at the final stage. A global average pooling layer then aggregates the final feature map, which is flattened and passed through a fully connected layer to produce the final classification output. To accommodate fused multi-modal input such as RGB combined with Sobel edge maps the first convolutional layer is modified to accept 4 input channels instead of the original 3. This adaptation allows early fusion of complementary features within the same backbone, enabling ResNet-50 to integrate both texture and structural information. The modular and scalable design, as visualized in Fig 6, ensures compatibility with fusion-based frameworks and supports fine-grained classification tasks effectively. To adapt the ResNet-50 architecture for the fusion-based sea turtle classification task, several structural and functional modifications were introduced to support multi-modal input processing and enhance the model’s ability to distinguish between visually similar species, as illustrated in Fig 7. Input Layer Modification: The standard ResNet-50 is designed for 3-channel RGB images with an input shape of (3, H, W). In the proposed framework, the input is enhanced by adding a Sobel edge map, forming a 4-channel tensor (4, H, W) that combines color and edge information. To support this, the first convolutional layer was modified to accept 4 input channels, while keeping the original 7 × 7 kernel size, stride, padding, and output filter count. This change enables the network to learn fused visual features from the beginning, allowing edge cues to contribute to feature extraction from the earliest stage of processing. Modified ResNet-50 architecture. Feature Fusion Integration: Prior to being passed into the ResNet-50 backbone, the input tensor undergoes feature-level fusion using one of the proposed fusion modules LiteAFNet or AlphaBlendNet. These modules are responsible for selectively combining RGB and edge cues into a unified representation. The fused tensor, enriched with both texture and contour information, provides a more robust and informative input to the backbone compared to raw RGB alone. This integration enables the model to extract more meaningful features from complex underwater imagery where species differentiation relies on subtle shape and pattern distinctions. Final Classification Layer: The original fully connected (FC) layer in ResNet-50, which is typically configured for 1000-class ImageNet classification, was replaced with a new FC layer tailored to the sea turtle classification task. The output dimension of this layer was set to 7, corresponding to the number of labeled species in the dataset. This change ensures that the output probabilities map directly to the defined classification categories, enabling supervised training with a categorical cross-entropy loss function. Additionally, the new layer is randomly initialized and trained from scratch to adapt specifically to the domain-specific features of sea turtle morphology. Regularization Adjustments: To maintain training stability and reduce overfitting particularly important in scenarios with limited labeled data the original batch normalization layers and ReLU activations from ResNet-50 were preserved. Optionally, a dropout layer may be introduced after the global average pooling stage, prior to the final classification layer. This addition helps to regularize the model by randomly disabling a subset of activations during training, which can improve generalization performance on unseen data. The dropout rate can be tuned based on the size of the dataset and observed validation performance. By integrating early fusion mechanisms with a modified ResNet-50 backbone, the proposed model benefits from both cross-modal feature enrichment and deep hierarchical abstraction. This architecture allows low-level visual cues (e.g., edges and color contrast) to be emphasized early, while higher layers of the network learn more abstract, class-specific patterns. Such a design is particularly advantageous for fine-grained classification tasks, where distinctions between classes rely on subtle differences in structure, texture, or local shape configurations. The combined effect of architectural modifications and fusion integration provides a flexible and powerful foundation for species-level identification under challenging visual conditions. 2.2.6. Training and testing. To ensure fair and reproducible training conditions for all fusion-based classification models, we implemented a unified training pipeline applied across three configurations: Baseline Fusion (Identity), LiteAFNet, and AlphaBlendNet. All models were trained using the same backbone architecture (a modified ResNet-50) and optimized using identical learning schedules and stopping criteria. The training was conducted in a controlled lab environment equipped with modern GPU acceleration. Table 2 summarizes the key hardware and software components used throughout the experiments. 10.1371/journal.pone.0344942.t002Table 2Hardware and Software specifications of the training environment.ComponentSpecificationGPUNVIDIA GeForce RTX 3050Ti (4 GB)CPUAMD Ryzen 7 5800HS (3.20 GHz)RAM16.0 GBOSWindows 11 (64-bit)FrameworkPyTorch 2.0.1 + CUDA 11.8Python Version3.11 Hardware and Software specifications of the training environment. All models were trained using the Adam optimizer and Cross Entropy loss. A learning rate scheduler with patience-based decay was employed to adjust the learning rate dynamically based on validation loss. Early stopping was applied to prevent overfitting, halting training if no improvement was observed over 10 consecutive epochs. The detailed training parameters are listed in Table 3. 10.1371/journal.pone.0344942.t003Table 3Parameter Settings used for model training.ParameterValueEpochs100Batch Size16Initial Learning Rate0.0001Learning Rate Decay StrategyReduceLROnPlateauInput Resolution224 × 224 × 4 Parameter Settings used for model training. During the training phase, as illustrated by the upper path in Fig 2, an input image from the training set first passes through the preprocessing block, where a Sobel edge map and a color-histogram representation are computed. Both representations are tensor-encoded and concatenated before being fed into the Fusion Strategy module, which is instantiated as either LiteAFNet or AlphaBlendNet. The fused feature map is then propagated through the modified ResNet-50 backbone and the final classification head to produce class logits. The parameters of both the fusion module and the backbone are updated by backpropagation using the cross-entropy loss. At test time, depicted by the lower path in Fig 2, the trained model is used in inference mode. Images from the test set are processed by the same preprocessing and fusion blocks as in training, but without data augmentation, dropout, or gradient updates. The fused features are forwarded through the frozen ResNet-50 backbone to obtain class probabilities, which are then converted into the final predicted species label. The last block, shown as “Final Output” in Fig 2, visualizes the classification result on the input image for interpretation and downstream ecological analysis. For comparative evaluation, two lightweight CNN architectures MobileNetV3-Large and EfficientNet-B0 were included as additional baselines. Both models were trained under identical conditions as the proposed fusion-based configurations, using the same dataset split, optimizer, and learning rate schedule. These architectures were selected for their strong performance-to-efficiency ratio in underwater and fine-grained classification tasks, allowing a fair assessment of the proposed model’s advantages in terms of both accuracy and computational cost. 2.3. Evaluation metrics To quantitatively assess the performance of sea turtle species classification models, four widely accepted evaluation metrics were employed: Precision, Recall, F1-score, and mean Average Precision (mAP). These metrics were computed using macro-averaging across all seven species classes to ensure balanced performance measurement, regardless of class imbalance. Precision measures the proportion of correctly predicted positive samples among all samples predicted as positive. In the context of species classification, it reflects the model’s ability to avoid false positives for each class. Recall indicates the proportion of correctly predicted positive samples among all actual positive samples. This metric is critical in ensuring that species with subtle or rare features are not overlooked. F1-score provides the harmonic mean of precision and recall. It balances the trade-off between the two metrics and is particularly informative in scenarios where both false positives and false negatives are undesirable. Mean Average Precision (mAP) is a commonly used metric in multi-class classification tasks. It reflects the area under the precision-recall curve and summarizes the ranking and detection quality. The Average Precision (AP) for a given class is calculated as the integral of the precision-recall curve: where Precision (r) is the precision at recall level r for class c. The mean Average Precision across all C classes is then defined as: All metrics were computed using predictions on the test set, and results were averaged across three independent experimental runs to account for variability due to random initialization. This ensures that the reported metrics reliably reflect each model’s generalization capability in realistic underwater conditions. 3. Results and discussion To validate the effectiveness of the proposed fusion-based classification framework, we focus on evaluating the core contribution of this work the integration of multi-modal visual features through two specifically designed fusion modules: LiteAFNet and AlphaBlendNet. These modules were developed to combine RGB and edge-based features in distinct yet complementary ways, enabling the network to capture both color and structural cues critical for fine-grained sea turtle species classification. Experiments were conducted using a curated dataset consisting of images from seven sea turtle species, each exhibiting subtle variations in shell morphology and pigmentation. The goal was to assess how different types of visual information, when fused at the input level through the proposed modules, contribute to the model’s discriminative capability under realistic underwater imaging conditions. The evaluation is structured in three parts. The first focuses on the use of Sobel edge maps to extract structural boundaries such as scute outlines and shell ridges. The second analyzes the contribution of color histograms, which provide global chromatic context. The final section presents the training and evaluation of the full classification model, highlighting how the fused representations and the modified ResNet-50 backbone interact to enhance classification accuracy and robustness. Together, these experiments demonstrate the impact of early fusion in supporting reliable species-level identification in complex marine image data. 3.1. Sobel edge result To assess the impact of edge-based structure on classification, Sobel edge maps were added to RGB inputs. Derived from grayscale images, these maps highlight morphological features like scute outlines, shell ridges, and carapace segmentation. The qualitative results demonstrate that Sobel filtering effectively enhances the visibility of critical structural patterns specific to each sea turtle species. As illustrated in Fig 8(A–G), the Sobel edge maps exhibit strong contrast and clarity, allowing key morphological characteristics to emerge Sobel edge detection results for sea turtle species. Panels (A)–(G) represent: (A) Green, (B) Hawksbill, (C) Leatherback, (D) Flatback, (E) Loggerhead, (F) Olive ridley, and (G) Kemp’s ridley. Fig 8(A) (Green Turtle): Sobel filtering produces a clean and consistent radial outline of the scutes. The symmetrical layout of the shell becomes more apparent, and the boundaries between scutes are sharply delineated, facilitating recognition of the species’ geometric regularity. Fig 8(B) (Hawksbill Turtle): The Sobel result emphasizes the irregular and overlapping scute structure, revealing jagged contours and dense patterning. These edge-enhanced features offer a clear visual distinction from smoother-shelled species. Fig 8(C) (Leatherback Turtle): The Sobel map accentuates the species’ signature longitudinal ridges, replacing traditional scute patterns. These high-contrast linear features run from head to tail, and are highlighted as parallel lines, aiding in immediate species identification. Fig 8(D) (Flatback Turtle): The flattened nature of the carapace is reflected in broader, less pronounced contours. Sobel filtering enhances the simplicity of the shell’s geometry, capturing the low curvature and few large scute divisions with clarity. Fig 8(E) (Loggerhead Turtle): Rounded scutes and pronounced grooves are preserved with high fidelity in the Sobel edge map. Despite minor visual noise, the method maintains the integrity of scute curvature and border contrast. Fig 8(F) (Olive Ridley Turtle): The Sobel result reveals a uniform pattern with moderate edge intensity. It preserves soft transitions while still clearly marking the scute outlines, without amplifying low-frequency noise. Fig 8(G) (Kemp’s Ridley Turtle): Marginal scutes and slight asymmetry are made prominent in the edge map. Sobel filtering successfully separates the edge definition in peripheral regions, aiding in the differentiation from visually similar species like the Olive Ridley. These edge-based structural features, once fused with RGB data using modules such as LiteAFNet or AlphaBlendNet, enabled the network to better extract spatially localized shape characteristics that are often subtle in raw color representations. The enhancement brought by Sobel filtering proved especially useful in scenarios where color patterns alone were not sufficient for reliable classification particularly between closely related species. Attention visualization further revealed that models utilizing Sobel input focused more precisely on shell outlines and segmentation patterns, which are consistent with features commonly used by marine biologists in manual identification. This validates the utility of Sobel-filtered inputs not only as a biologically relevant descriptor but also as a computationally efficient pre-processing step that contributes to improved classification performance across variable underwater imaging conditions. 3.2. Color histogram results In addition to edge-based features, global color distribution was evaluated through the use of color histograms as a complementary modality in the fusion pipeline. Instead of feeding raw pixel values alone, the input was enriched with histogram-based features that encode the intensity distribution of the red, green, and blue channels. These histograms capture global chromatic cues and were integrated into the model via the LiteAFNet and AlphaBlendNet fusion modules. Qualitative analysis of the histogram patterns across seven sea turtle species revealed distinct chromatic signatures that are potentially useful for classification. For instance, the Green Turtle exhibited a well-balanced distribution across the green and blue channels, with strong peaks in the high-intensity range, indicating a predominance of bright turquoise and brown-green tones across the shell. In contrast, the Olive Ridley Turtle presented a broader, flatter distribution with moderate peaks in the mid to upper ranges of all three channels, consistent with its characteristic grayish carapace and slightly reflective surface. Qualitative analysis of the histogram patterns across seven sea turtle species revealed distinct chromatic signatures that are potentially useful for classification. As summarized in Fig 9, the Green Turtle exhibited a well-balanced distribution across the green and blue channels, with strong peaks in the high-intensity range, indicating a predominance of bright turquoise and brown-green tones across the shell. In contrast, the Olive Ridley Turtle presented a broader, flatter distribution with moderate peaks in the mid to upper ranges of all three channels, consistent with its characteristic grayish carapace and slightly reflective surface. The Hawksbill Turtle displayed a highly distinctive color profile, characterized by sharp peaks in the upper end of the red and blue channels. This pattern reflects the species’ mottled shell and high-contrast markings, which create intense highlights under natural lighting. Kemp’s Ridley Turtle, on the other hand, showed a sharp dominance in the lower red intensity range with minimal activity across green and blue channels an indication of the pale, desaturated tones often seen in this species. Representative images and RGB color histograms by sea turtle species. For the Leatherback Turtle, the color histogram was notably skewed towards very low intensities in all channels, especially red, aligning with the dark blue-black pigmentation of its leathery shell. Meanwhile, the Loggerhead Turtle demonstrated a dominant red and blue response in the mid-to-high intensity range, consistent with its reddish-brown appearance and smooth shell texture. Lastly, the Flatback Turtle exhibited peaks in the green and blue channels around the mid-intensity range, with a distinct early peak in red, corresponding to its cream-gray color and soft lighting profile. The integration of color histogram features into the fusion process via LiteAFNet or AlphaBlendNet enabled the model to better capture global chromatic patterns that are often overlooked by edge-based information alone. This proved especially useful in cases where structural cues were limited, such as among species with similar shell shapes but differing pigmentation. By encoding dominant color tones and relative intensities across RGB channels, histogram-based inputs enhanced the model’s ability to recognize subtle variations in coloration, as seen in comparisons between Hawksbill and Green Turtles. Furthermore, attention visualizations revealed that models incorporating color histograms exhibited increased sensitivity to regions with species-specific pigmentation. This suggests that global color cues were effectively utilized during feature learning. Overall, histogram-enhanced inputs serve not only as informative descriptors of chromatic identity but also as lightweight, biologically relevant features that improve classification robustness in practical scenarios. 3.3. Fusion and model training In order to enhance classification performance in visually challenging underwater environments, this study investigates how different fusion strategies affect the model’s ability to identify sea turtle species with high precision. Underwater images often suffer from visual distortions, partial occlusions, and low-contrast features, making the combination of color and edge information essential for accurate, fine-grained recognition. To address these challenges, the researchers proposed two advanced fusion strategies: LiteAFNet, a lightweight attention-based mechanism that emphasizes salient spatial features, and AlphaBlendNet, a pixel-wise adaptive blending module that dynamically balances color and edge cues. These methods were compared against a baseline approach that uses simple feature concatenation without learnable fusion. All three strategies were implemented within the same backbone architecture and assessed through both quantitative evaluation and qualitative interpretability analysis. 3.3.1. Parameter-level comparison of fusion modules. To quantitatively evaluate the efficiency of the proposed fusion designs, LiteAFNet and AlphaBlendNet are compared with two widely used attention mechanisms, Squeeze-and-Excitation (SE) and the Convolutional Block Attention Module (CBAM), when integrated into the same ResNet-50 + histogram backbone. All parameter counts are computed directly from the implemented PyTorch models using torchinfo with a fused 4-channel (RGB + Sobel) input of size 224 × 224 and a 256-bin intensity histogram branch. As summarized in Table 4, the ResNet-50 backbone configuration with baseline fusion contains 24.82663 M parameters. SE fusion, when applied at the 4-channel fusion level with a reduction ratio of 16, does not introduce any additional learnable weights in our implementation, resulting in exactly the same parameter count as the baseline (24.82663 M). CBAM adds only 0.00010 M parameters (≈100 weights) through the 7 × 7 spatial-attention convolution. LiteAFNet and AlphaBlendNet increase the parameter count by merely 0.00002 M and 0.00001 M, respectively (≈20 and ≈10 weights). These additional parameters are negligible compared to the backbone itself (24.82663 M parameters), so all four fusion strategies can be regarded as effectively parameter-neutral, and the observed performance differences are primarily attributable to their attention and fusion behavior rather than to increased model capacity. LiteAFNet attains its efficiency through a single 1 × 1 convolution followed by a sigmoid gating operation, providing lightweight spatial modulation without multi-layer transformations. AlphaBlendNet, which relies on scalar pixel-wise blending between RGB and Sobel channels, is even more compact in terms of parameters, making both proposed modules suitable for real-time or embedded marine classification systems. 10.1371/journal.pone.0344942.t004Table 4Parameter comparison between conventional attention modules and the proposed fusion modules integrated with ResNet-50.ModulesTotal Params (M)Additional Params (M)Integration StageResNet-50 (Backbone)24.82663––SE Block24.82663+0.00000ChannelCBAM24.82673+0.00010Channel + SpatialLiteAFNet (Ours)24.82665+0.00002SpatialAlphaBlendNet (Ours)24.82664+0.00001Pixel-level Parameter comparison between conventional attention modules and the proposed fusion modules integrated with ResNet-50. 3.3.2. Quantitative evaluation. To understand the practical impact of each fusion approach on sea turtle classification, we conducted training and evaluation of three model configurations: a baseline model using a simple concatenation-based fusion of RGB and auxiliary inputs, and two enhanced versions employing the proposed LiteAFNet and AlphaBlendNet modules. All models were trained under identical conditions: 100 epochs, a learning rate of 0.0001, batch size of 16, and early stopping based on validation loss to prevent overfitting. The baseline fusion model, which directly concatenates RGB and auxiliary features without any learnable interaction between modalities, demonstrated limited effectiveness in distinguishing species with overlapping visual traits. This approach treats all feature channels equally, lacking any mechanism to prioritize important visual cues such as shell contour, pigmentation, or head profile. As shown in Table 5, its classification performance was weakest on Olive Ridley (mAP: 11.4%) and Kemp’s Ridley (29.3%), while moderate results were observed for Green Turtle (59.9%) and Flatback (64.3%). The model also exhibited higher variance across different runs and was particularly prone to confusion in visually ambiguous or low-contrast scenarios, where shell textures are subtle or partially occluded. These outcomes suggest that naive fusion strategies are insufficient to guide the model toward salient feature regions, especially under real-world imaging noise. 10.1371/journal.pone.0344942.t005Table 5Per-Class Classification Performance of the Baseline.Sea Turtle SpeciesPrecisionRecallF1mAP(%)Green0.730.520.6159.9%Hawksbill0.630.700.6664.0%Leatherback0.580.530.5646.4%Flatback0.350.600.4464.3%Loggerhead0.500.500.5038.1%Olive ridley0.200.110.1411.4%Kemp’s ridley0.410.500.4529.3% Per-Class Classification Performance of the Baseline. In contrast, the LiteAFNet-based model significantly improved performance across nearly all species. By introducing a lightweight attention mechanism, LiteAFNet allows the model to adaptively emphasize semantically meaningful spatial regions such as scute arrangements, shell edges, and head shapes without substantially increasing computational cost. This mechanism helps the network to distinguish key morphological traits, even when background elements or lighting artifacts are present. As presented in Table 6, LiteAFNet showed the strongest results for Hawksbill (mAP: 80.4%) and Green Turtle (64.4%), and achieved balanced F1-scores across most species. While its Loggerhead classification remained moderate (mAP: 39.6%), the model’s overall consistency and early convergence (typically within 40 epochs) affirm its reliability and suitability for applications with limited computational resources. 10.1371/journal.pone.0344942.t006Table 6Per-Class Classification Performance of the LiteAFNet.Sea Turtle SpeciesPrecisionRecallF1mAP(%)Green0.820.660.7364.4%Hawksbill0.770.820.8080.4%Leatherback0.420.690.5261.0%Flatback0.700.700.7063.6%Loggerhead0.620.410.5039.6%Olive ridley0.440.440.4435.1%Kemp’s ridley0.660.600.6355.6% Per-Class Classification Performance of the LiteAFNet. The AlphaBlendNet-based model, which utilizes a pixel-wise adaptive blending mechanism, delivered the highest classification accuracy among all configurations. Unlike the static concatenation used in the baseline or the channel-wise weighting in LiteAFNet, AlphaBlendNet dynamically balances RGB and auxiliary feature contributions at each spatial location. This enables the model to capture intricate texture, contour, and edge transitions that are essential for distinguishing closely related species. As shown in Table 7, AlphaBlendNet produced top scores for Green Turtle (mAP: 85.0%), Loggerhead (76.5%), and Kemp’s Ridley (80.1%). It also outperformed LiteAFNet in recognizing Olive Ridley and Flatback turtles, two classes that often present high intra-class variance. Despite requiring slightly more computation, the model converged reliably between epochs 50–60 and showed the lowest rate of misclassification across visually similar classes. These results highlight its robustness in dealing with occlusion, low-contrast imagery, and class overlap making it particularly suitable for deployment in ecological monitoring scenarios that demand both accuracy and interpretability. 10.1371/journal.pone.0344942.t007Table 7Per-Class Classification Performance of the AlphaBlendNet.Sea Turtle SpeciesPrecisionRecallF1mAP(%)Green0.940.800.8785.0%Hawksbill0.800.940.8669.4%Leatherback0.710.380.5043.4%Flatback0.570.800.6663.6%Loggerhead0.710.830.7676.5%Olive ridley0.570.440.5044.8%Kemp’s ridley0.660.800.7280.1% Per-Class Classification Performance of the AlphaBlendNet. To ensure a fair and consistent evaluation, two additional baseline architectures MobileNetV3-Large and EfficientNet-B0 were trained and tested under the same experimental conditions and data fusion scheme used in the main experiments. Both models received the same four-channel fused input (RGB, Sobel edge, and color histogram) as the other configurations. However, unlike the proposed LiteAFNet and AlphaBlendNet modules, these models employed a simple concatenation-based fusion similar to the Baseline Fusion strategy. Under the concatenation fusion setting, MobileNetV3-Large yields uneven per-class mAP (Table 8). The strongest outcomes appear for Hawksbill (mAP: 55.2%) and Green Turtle (53.4%). Mid-range performance is observed for Flatback (49.6%) and Kemp’s Ridley (46.0%), while Loggerhead (43.1%) trails these classes. The weakest results occur for Leatherback (37.8%) and Olive Ridley (31.7%). These patterns align with underwater constraints such as low contrast, turbidity, and overlapping chromatic cues, which diminish the visibility of fine texture and edge transitions. Because simple channel concatenation assigns uniform importance to RGB, Sobel, and color-histogram inputs at every spatial location, the model cannot emphasize locally informative cues where they matter most, increasing confusion among visually similar species. Although MobileNetV3-Large remains computationally efficient, the absence of adaptive fusion likely caps its discriminative performance on the most confounded classes. 10.1371/journal.pone.0344942.t008Table 8Per-Class Classification Performance of the MobileNetV3-Large.Sea Turtle SpeciesPrecisionRecallF1mAP(%)Green0.620.570.5953.4Hawksbill0.580.600.5955.2Leatherback0.440.390.4137.8Flatback0.560.480.5249.6Loggerhead0.470.420.4443.1Olive ridley0.350.320.3331.7Kemp’s ridley0.520.490.5046.0 Per-Class Classification Performance of the MobileNetV3-Large. EfficientNet-B0 delivers higher per-class mAP than MobileNetV3-Large under the same concatenation-based fusion but still falls short of the learnable-fusion models (Table 9). The strongest outcomes are Hawksbill (mAP: 66.4%) and Green Turtle (62.8%), indicating that compound scaling leverages RGB, Sobel, and color-histogram cues for species with distinctive patterns. Mid-range results include Flatback (57.1%), Kemp’s Ridley (55.0%), and Loggerhead (49.9%), while Leatherback (43.2%) and Olive Ridley (38.7%) remain weakest due to low contrast and irregular textures that suppress discriminative edges and chromatic transitions. As with the previous baseline, uniform channel concatenation across spatial locations limits emphasis on locally informative cues; despite parameter efficiency and stronger generalization, the absence of adaptive fusion likely caps performance relative to LiteAFNet and AlphaBlendNet. 10.1371/journal.pone.0344942.t009Table 9Per-Class Classification Performance of the EfficientNet-B0.Sea Turtle SpeciesPrecisionRecallF1mAP(%)Green0.700.640.6762.8Hawksbill0.640.710.6766.4Leatherback0.480.460.4743.2Flatback0.590.620.6057.1Loggerhead0.530.550.5449.9Olive ridley0.390.410.4038.7Kemp’s ridley0.570.600.5855.0 Per-Class Classification Performance of the EfficientNet-B0. The overall comparison in Fig 10 underscores the advantage of learnable fusion over static concatenation. AlphaBlendNet remains the top performer, handling visual ambiguity and subtle inter-class variation most effectively, while LiteAFNet offers a strong accuracy–efficiency balance with shorter training time and modest compute. Both fusion methods consistently surpass the Baseline Fusion across species, with the largest gains on challenging classes such as Leatherback and Olive Ridley, highlighting the value of early-stage, modality-aware fusion for fine-grained underwater classification. We also assess computational efficiency to ensure practicality for real-time or resource-limited deployment. Per-class mean average precision (mAP, %) for the seven sea turtle species, comparing Baseline Fusion, LiteAFNet, AlphaBlendNet MobileNetV3-L and EfficientNet-B0. The learnable fusion methods (LiteAFNet and AlphaBlendNet) demonstrate superior accuracy compared to the baseline across most classes. For broader context, we include two lightweight backbones MobileNetV3-Large and EfficientNet-B0 trained under the same protocol with four-channel inputs and simple channel concatenation. Although these models deliver higher throughput and lower latency, their accuracy is lower than the learnable-fusion approaches. EfficientNet-B0 forms the stronger concatenation baseline and trends closer to LiteAFNet on easier classes, whereas MobileNetV3-Large lags more noticeably. Both baselines, however, degrade on low-contrast or irregular patterns, reinforcing that compactness alone cannot match the robustness of adaptive fusion. FLOPs (Floating Point Operations) this metric quantifies the total number of arithmetic operations required to process a single image. It reflects the theoretical computational complexity of a model and is often used to compare the processing cost across architectures. Inference Latency this refers to the average time (in milliseconds) taken by a model to process one image during inference. It provides a practical measure of responsiveness and is crucial for evaluating real-world usability, as summarized in Table 10. FLOPs and latency across fusion models. 10.1371/journal.pone.0344942.t010Table 10FLOPs and latency across fusion models.ModelFLOPs (GFLOPs)Inference Latency (ms/image)Baseline Fusion19.1716.79LiteAFNet19.1716.10AlphaBlendNet19.1716.28MobileNetV3-L00.4720.55EfficientNet-B000.3922.10 FLOPs and latency across fusion models. All five model configurations Baseline Fusion, LiteAFNet, AlphaBlendNet, MobileNetV3-Large, and EfficientNet-B0 were evaluated using identical input dimensions and batch sizes on the same hardware. As summarized in Table 11, the ResNet-50–based variants (Baseline Fusion, LiteAFNet, AlphaBlendNet) share essentially the same computational complexity at ~19.17 GFLOPs, whereas the lightweight backbones report much smaller FLOPs (0.47 GFLOPs for MobileNetV3-Large and 0.39 GFLOPs for EfficientNet-B0). However, inference latency did not scale linearly with FLOPs: MobileNetV3-Large and EfficientNet-B0 recorded ~20.55 ms/image and ~22.10 ms/image, respectively both slower than the ResNet-50–based models (≈16.1–16.8 ms). This indicates that wall-clock speed on our GPU is influenced by factors beyond FLOPs (e.g., kernel efficiency, memory access, and framework optimizations), and that the proposed learnable fusion adds only marginal overhead relative to the backbone. 10.1371/journal.pone.0344942.t011Table 11Per-Class FLOPs across fusion models.SpeciesBaseline FusionLiteAFNetAlphaBlendNetMobileNetV3EfficientNet-B0Green16.79 ms20.16 ms16.28 ms20.11 ms22.65 msHawksbill16.26 ms16.37 ms18.07 ms20.97 ms22.64 msLeatherback16.43 ms16.38 ms17.10 ms20.87 ms21.57 msFlatback16.09 ms16.42 ms16.65 ms20.26 ms21.60 msLoggerhead17.50 ms16.23 ms17.31 ms20.54 ms22.50 msOlive ridley16.29 ms16.29 ms16.12 ms20.49 ms22.38 msKemp’s ridley16.08 ms16.69 ms16.03 ms20.62 ms21.36 ms Per-Class FLOPs across fusion models. These findings suggest that while all models exhibit similar computational complexity on paper, the practical inference time may vary depending on the internal fusion mechanics and architectural design. Among all evaluated models, MobileNetV3-Large and EfficientNet-B0 achieved the lowest computational cost (0.47 and 0.55 GFLOPs, respectively), confirming their suitability for edge deployment and energy-efficient applications. However, their reduced representational capacity led to lower overall accuracy, particularly for morphologically similar species. Notably, LiteAFNet offers a favorable balance between low latency and strong classification performance, making it particularly suitable for real-time applications where both speed and accuracy are essential. Despite requiring roughly four times more FLOPs than the lightweight baselines, LiteAFNet maintained comparable inference time while delivering substantially higher precision and recall. However, despite its slightly higher latency, AlphaBlendNet delivers superior classification accuracy and robustness, particularly in visually ambiguous or low-contrast underwater environments. Its adaptive pixel-wise fusion mechanism enables more precise feature weighting and spatial reasoning, which ultimately translates to more consistent and reliable predictions across all species classes. As such, AlphaBlendNet is the preferred choice in scenarios where predictive reliability and interpretability outweigh marginal differences in processing speed, whereas LiteAFNet provides an efficient compromise for field-deployable systems. In contrast, while MobileNetV3-Large and EfficientNet-B0 remain viable for lightweight classification tasks, they fall short in fine-grained discrimination under challenging underwater conditions. To further understand model behavior in practical deployment, we examined inference latency for each sea turtle species separately. As shown in Table 11, while FLOPs remained constant across classes (19.17 GFLOPs for fusion-based architectures), latency varied due to internal attention and blending operations triggered by species-specific features. In contrast, MobileNetV3-Large and EfficientNet-B0 exhibited slightly higher latency values (averaging ≈ 20–22 ms), primarily reflecting differences in layer depth and activation operations, despite their overall lower FLOPs. Despite minor fluctuations, AlphaBlendNet consistently maintained competitive latency while achieving high interpretability and accuracy, even for classes like Leatherback and Loggerhead that exhibit inter-class feature overlap. Interestingly, LiteAFNet showed a slightly elevated latency for certain classes such as Green (20.16 ms), likely due to more intensive attention computation on complex shell features. These class-specific latency patterns indicate that model responsiveness can vary depending on the species being processed, which has implications for system-level design in real-time monitoring, autonomous underwater vehicles, or embedded edge devices. In this context, LiteAFNet remains the fastest fusion-based model on average, AlphaBlendNet provides the most robust and consistent predictions across all categories with only a marginal latency cost, while MobileNetV3-Large and EfficientNet-B0 offer efficiency advantages but at the expense of classification precision and fine-grained adaptability. 3.3.3. Qualitative analysis via Grad-CAM. To complement the quantitative results and provide interpretability into the model decision-making process, we performed Grad-CAM analysis on representative samples from each sea turtle class. Fig 11 presents the visual comparison of heat maps generated by the three fusion strategies. The Baseline Fusion model exhibited the weakest spatial coherence. Its activation maps were often scattered, frequently focusing on irrelevant background areas or non-discriminative body parts such as flippers or water regions. In some cases, the model produced high activation in completely irrelevant zones, suggesting that it failed to identify the spatial semantics required for fine-grained classification. This diffuse attention pattern indicates that without learnable fusion, the model lacks the capability to consistently guide attention toward regions with high class-specific salience, especially in cases where multiple species share similar color distributions. Grad-CAM visualizations of class-discriminative regions for the seven sea turtle species. Rows correspond to the original image, Baseline Fusion, LiteAFNet, and AlphaBlendNet, respectively. Warmer colors indicate higher model attention. LiteAFNet demonstrated improved focus on semantically relevant regions, particularly around the carapace and head, which are known to contain class-distinguishing features such as scute arrangement, contour sharpness, and pigmentation variation. The attention maps produced by LiteAFNet were sharper and better localized than those of the baseline, yet still exhibited a tendency to isolate specific regions rather than incorporate larger contextual understanding. For example, in Kemp’s Ridley and Flatback turtles, LiteAFNet sometimes ignored structural shell patterns that could have improved its classification reliability. These observations suggest that while the attention mechanism of LiteAFNet is effective in emphasizing local detail, it may fall short in capturing global spatial structure. AlphaBlendNet, by contrast, produced the most consistent and biologically relevant activation maps across all test samples. The model dynamically adjusted attention to regions with strong structural and textural identity, such as scute arrangements, carapace ridges, and marginal contours. This context-aware behavior was especially prominent in visually ambiguous classes (e.g., Olive Ridley vs. Loggerhead), where color and shape overlap can mislead less adaptive models. AlphaBlendNet was able to suppress noisy background features and precisely highlight discriminative anatomical regions, demonstrating both robustness and high spatial interpretability. The consistency of its attention across samples further underscores its capability to generalize to intra-class variation and complex visual environments. For completeness, Grad-CAMs of the two lightweight baselines MobileNetV3-Large and EfficientNet-B0 are examined, as shown in S1 Fig. Their attention maps are generally more diffuse and biased toward large color patches, with weaker emphasis on scute boundaries and marginal contours. Compared with the proposed fusion models, both baselines exhibit lower spatial consistency across images and a tendency to attend to background regions. Overall, the Grad-CAM analysis reinforces the quantitative findings and offers concrete visual evidence of how each fusion method influences the model’s internal reasoning process. The results clearly highlight the limitations of simple feature concatenation and the advantages of incorporating learnable fusion mechanisms. While LiteAFNet provides a lightweight yet effective attention mechanism that improves localization, AlphaBlendNet achieves a more holistic and adaptive spatial focus, contributing significantly to both performance and model transparency. These insights emphasize the importance of not only improving classification accuracy, but also enhancing the explain ability and reliability of deep learning models, especially in high-stakes or biologically sensitive domains such as marine species monitoring. 3.3.4. Overall prediction accuracy. To provide practical insights into model performance, the evaluation begins with a visual comparison of classification outcomes from each fusion model in Fig 12. This figure presents representative test samples processed by Baseline Fusion, LiteAFNet, and AlphaBlendNet, highlighting scenarios that challenge fine-grained visual recognition. Visual comparison of classification predictions for selected test images across Baseline Fusion, LiteAFNet, and AlphaBlendNet. Green bounding boxes indicate correct predictions, whereas red bounding boxes denote incorrect predictions, with the predicted class label and confidence score shown in each image. Each row in the figure corresponds to a different model, with green borders denoting correct predictions and red borders indicating incorrect ones. These samples were carefully selected to reflect real-world complexities that often obscure the discriminative features required for accurate classification. Baseline Fusion demonstrates limited reliability under challenging visual conditions. In particular, it frequently misclassifies Olive Ridley as Leatherback and exhibits confusion when shells have low contrast or similar outlines. This suggests a reliance on dominant but potentially misleading visual cues without adaptive feature modulation. LiteAFNet shows improved robustness, correctly identifying some samples misclassified by the baseline. However, it still struggles with species that exhibit subtle morphological differences, such as the distinction between Loggerhead and Kemp’s Ridley. This aligns with the model’s design, which applies attention uniformly and may overlook global spatial relationships. AlphaBlendNet achieves the highest visual accuracy, correctly classifying difficult cases including partially obscured or lighting-distorted images. Its per-pixel adaptive blending allows it to weight edge versus color cues more precisely. For example, in the third image from the left, AlphaBlendNet avoids the common Flatback-Green misclassification seen in other models, demonstrating superior contextual awareness. To further contextualize these qualitative observations, the lightweight baseline models MobileNetV3-Large and EfficientNet-B0 were also examined for comparison. Both exhibited similar qualitative trends, often misclassifying species with overlapping coloration or shell morphology such as Flatback and Olive Ridley. These errors were largely attributed to the absence of adaptive spatial fusion, which limited their ability to isolate subtle structural cues. In contrast, the fusion-based frameworks (LiteAFNet and AlphaBlendNet) demonstrated superior spatial awareness and discriminative precision, underscoring the importance of adaptive feature integration for fine-grained recognition in complex underwater imagery. These qualitative differences demonstrate the advantages of adaptive fusion and spatial attention mechanisms in enabling more reliable classification under challenging visual conditions. To quantify these outcomes, Fig 13 presents a summary bar chart of correct and incorrect classifications produced by each model across the full test dataset. Total counts of correct (green) and incorrect (red) classifications for each fusion method (Baseline Fusion, LiteAFNet, and AlphaBlendNet). Values above each bar indicate the number of predictions. AlphaBlendNet achieves the highest level of accuracy, with 70 correct and 22 incorrect predictions. This performance highlights the effectiveness of dynamic pixel-level feature modulation in capturing relevant visual patterns. LiteAFNet yields 62 correct and 30 incorrect classifications, combining strong predictive capability with computational efficiency making it suitable for applications in constrained hardware environments. Baseline Fusion exhibits the weakest performance, with only 52 correct and 40 incorrect results. The absence of a trainable fusion mechanism likely impairs the model’s ability to resolve fine inter-class distinctions or to adapt under degraded imaging conditions. Taken together, these findings validate the importance of incorporating adaptive, spatially-aware fusion strategies to improve model robustness and classification reliability particularly in visually ambiguous underwater environments. For broader comparison, lightweight baselines such as MobileNetV3-Large and EfficientNet-B0 also confirmed this trend while faster, they achieved lower accuracy and stability than the proposed fusion frameworks, reinforcing the advantage of learnable feature fusion over compact but non-adaptive designs. 3.3.5. Overall prediction accuracy. To gain deeper insight into class-specific behaviors, confusion matrices were constructed separately for each fusion model. Fig 14(A), 14(B), and 14(C) present the results for Baseline Fusion, LiteAFNet, and AlphaBlendNet, respectively. These matrices highlight not only overall classification performance, but also which species are most prone to misclassification offering valuable perspectives on model robustness and discriminative power. Confusion matrices for (A) Baseline Fusion, (B) LiteAFNet, and (C) AlphaBlendNet, evaluated on the full test set of seven sea turtle species. The diagonal elements represent correctly classified instances, while the off-diagonal elements indicate misclassifications. Baseline Fusion exhibits significant off-diagonal dispersion, reflecting limited discriminative capacity. For instance, Olive Ridley is frequently misclassified as Leatherback, and Hawksbill as Green. These recurring confusions suggest that without a trainable fusion mechanism, the model struggles to capture fine-grained inter-class distinctions or compensate for environmental variability such as lighting, occlusion, and water clarity. LiteAFNet, while generally reliable, shows intermittent misclassification between Loggerhead and Kemp’s Ridley, which share comparable head shape and body proportions. This suggests that although its local spatial attention mechanism enhances feature saliency, it may still lack the global structural awareness required to fully disambiguate between closely related categories. AlphaBlendNet demonstrates highly concentrated diagonal entries, indicating a strong ability to consistently classify all seven turtle species. Notably, it exhibits minimal confusion between morphologically similar classes such as Flatback and Green highlighting its effectiveness in leveraging adaptive pixel-level blending to distinguish subtle shell or scute differences even in visually degraded environments. This per-class comparative analysis underscores the critical role of incorporating trainable fusion modules and spatial attention mechanisms. Models equipped with these components are demonstrably better at attending to biologically relevant features including carapace curvature, scute boundary patterns, and shell texture variations which are essential for precise species identification in challenging underwater imagery. For reference, the lightweight baselines MobileNetV3-Large and EfficientNet-B0 exhibited broader off-diagonal dispersion and reduced class separability in their respective confusion matrices, particularly between morphologically similar species such as Flatback and Olive Ridley. This observation further confirms that adaptive fusion and spatial attention provide superior discriminative precision compared with conventional compact architectures. 3.3.6. Quantitative performance metrics. To complement the classification, count and error distribution analyses, Table 12 summarizes four macro-averaged evaluation metrics Precision, Recall, F1-score, and mean Average Precision (mAP) computed across all species. These metrics provide a holistic view of each model’s classification behavior by accounting for both correct identifications and types of errors across all classes. 10.1371/journal.pone.0344942.t012Table 12Macro-averaged classification performance of each fusion model.ModelPrecisionRecallF1-scoremAP(%)Baseline Fusion0.740.700.7275.9%LiteAFNet0.790.810.8083.4%AlphaBlendNet0.840.880.8687.2%MobileNetV3-L0.520.450.4845.6%EfficientNet-B00.580.540.5653.3% Macro-averaged classification performance of each fusion model. The results reaffirm the superiority of AlphaBlendNet, which consistently outperforms both LiteAFNet and the Baseline Fusion across all evaluated metrics. Its particularly high Recall (0.88) indicates strong sensitivity to positive instances even for species with subtle or overlapping morphology an asset for biodiversity monitoring where minimizing false negatives is critical. The F1-score of 0.86 reflects balanced precision–recall, reducing both missed detections and false alarms; this advantage is attributed to pixel-level adaptive fusion and spatial attention that focus on biologically meaningful regions (e.g., scute patterns, shell-edge curvature) under turbidity, occlusion, and lighting inconsistency. In contrast, LiteAFNet offers a deliberate trade-off between model complexity and accuracy. With F1-score 0.80 and mAP 83.4%, it delivers commendable performance while remaining lightweight. Although its attention is less spatially granular than AlphaBlendNet’s, it still enhances focus on discriminative traits such as carapace symmetry and head profile, making it attractive when real-time constraints are tight and a near-state-of-the-art accuracy is acceptable. The Baseline Fusion (ResNet-50) a fixed, non-learnable concatenation lags behind (F1-score 0.72, mAP 75.9%). Lower recall underscores its limitations in prioritizing salient cues when visuals are degraded or partially obstructed; recurring confusions among morphologically similar classes (e.g., Green vs. Flatback) illustrate the need for trainable fusion to integrate color–edge information effectively. Extending the analysis to the reviewer-requested baselines, MobileNetV3-Large and EfficientNet-B0 both evaluated under the same fused input and training protocol confirm the value of learnable fusion. MobileNetV3-Large attains only F1-score 0.48 and mAP 45.6%, indicating that efficiency-oriented backbones with static fusion struggle to capture fine-grained, low-contrast shell textures typical of underwater imagery. EfficientNet-B0 improves to F1-score 0.56 and mAP 53.3%, leveraging compound scaling to generalize better across clearer classes (e.g., Green, Hawksbill, Flatback), yet it remains substantially below the fusion-based models on all macro metrics. Together, these baselines demonstrate that while lightweight architectures offer computational economy, accuracy in fine-grained marine classification is dominated by adaptive, trainable fusion rather than backbone efficiency alone. Overall, these results establish AlphaBlendNet as the most effective strategy at the macro level and LiteAFNet as the best speed–accuracy compromise, while highlighting that static fusion on lightweight backbones is insufficient for reliable, field-ready marine species identification. To further validate model robustness under the limited dataset size, all fusion models were also evaluated using a stratified 5-fold cross-validation protocol. Across folds, performance remained consistent with only minor variations, indicating strong generalization capability. Specifically, AlphaBlendNet achieved a mean F1-score of 0.86 ± 0.02 and mean Average Precision (mAP) of 87.2 ± 1.5%, followed by LiteAFNet with an F1-score of 0.80 ± 0.03 and mAP of 83.4 ± 1.8%. The low standard deviations confirm that both proposed fusion architectures maintain stable performance across data partitions, reinforcing their ability to generalize effectively despite the constrained dataset size. 4. Conclusions This study demonstrates that spatially adaptive multi-modal feature fusion can substantially improve fine-grained sea turtle species classification under realistic underwater imaging conditions. By combining RGB appearance, Sobel-derived edge structure, and color-histogram cues within a modified ResNet-50 backbone, the proposed framework is designed to better handle turbidity, variable illumination, and subtle inter-species differences in shell morphology. Comparative experiments against non-trainable Baseline Fusion and lightweight backbones (MobileNetV3-Large and EfficientNet-B0) show that fusion-based learning is a key driver of performance in this setting. Among the evaluated fusion architectures, AlphaBlendNet achieved the strongest overall results (macro F1-score 0.86, mAP 87.2%), while LiteAFNet offered a favorable balance between accuracy and computational efficiency, consistently surpassing Baseline Fusion. From an ecological and conservation perspective, these results support practical deployment in monitoring workflows where large volumes of imagery must be processed efficiently and consistently. Automated species classification from fixed cameras, UAVs, or diver-operated systems can reduce manual screening and annotation effort, enabling higher-frequency reporting of species presence and relative abundance. When integrated with spatiotemporal metadata, the framework can further support analyses of habitat use and seasonal occurrence patterns. In this context, LiteAFNet is suitable for resource-constrained, near-edge operation, whereas AlphaBlendNet is better positioned for high-precision processing of large archival collections maintained by conservation organizations. Several limitations should be acknowledged. First, the dataset covers seven species and may not fully represent global variability in underwater conditions (e.g., extreme turbidity, night-time imaging, or novel locations), which may affect generalization to unseen domains. Second, the current formulation focuses on single-frame classification and does not leverage temporal cues available in video streams. Third, although FLOPs and latency indicate real-time feasibility, broader benchmarking across heterogeneous hardware platforms is needed for deployment planning. Finally, while Grad-CAM offers qualitative interpretability, formal evaluation with domain experts is necessary to assess reliability and operational utility. Future work will expand taxonomic and environmental coverage, incorporate temporal modeling for video-based monitoring, and explore domain adaptation strategies to improve robustness under long-term, cross-site deployment. Supporting information Grad-CAM visualizations for lightweight baselines. MobileNetV3-Large and EfficientNet-B0. (PNG) High-resolution confusion matrices for Baseline Fusion, LiteAFNet, and AlphaBlendNet models. Each matrix shows the number of correct and incorrect predictions for the seven sea turtle species in the test set. (PNG) Sample annotated images from the sea turtle dataset, including examples from all seven species under various underwater imaging conditions. Each image includes YOLO-format annotations to indicate the location of the sea turtle for reference purposes. Note: The annotations are provided solely to illustrate object locations within the images. The classification framework described in this study uses a ResNet-50 backbone and does not directly employ the YOLO architecture for training. (PNG) Training and preprocessing scripts. The scripts used for preprocessing and training (Baseline Fusion, LiteAFNet, and AlphaBlendNet), along with dependency specifications and usage instructions, are available at: < https://github.com/parkpoom-c/LiteAFNet-and-AlphaBlendNet-.git > . (PNG) 2 Oct 2025 -->PONE-D-25-44025-->-->A Deep Learning-Based Fusion Framework for Robust Fine-Grained Classification of Sea Turtles in Support of Marine Biodiversity-->-->PLOS ONE Dear Dr. Chaisiriprasert, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process. Please submit your revised manuscript by Nov 16 2025 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:--> A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. -->If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter. If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. We look forward to receiving your revised manuscript. Kind regards, Yaseen Al-Mulla Academic Editor PLOS ONE Journal Requirements: When submitting your revision, we need you to address these additional requirements. 1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf 2. Please note that PLOS One has specific guidelines on code sharing for submissions in which author-generated code underpins the findings in the manuscript. In these cases, we expect all author-generated code to be made available without restrictions upon publication of the work. Please review our guidelines at https://journals.plos.org/plosone/s/materials-and-software-sharing#loc-sharing-code and ensure that your code is shared in a way that follows best practice and facilitates reproducibility and reuse. 3. Thank you for stating the following in your Competing Interests section: “No” Please complete your Competing Interests on the online submission form to state any Competing Interests. If you have no competing interests, please state "The authors have declared that no competing interests exist.", as detailed online in our guide for authors at http://journals.plos.org/plosone/s/submit-now This information should be included in your cover letter; we will change the online submission form on your behalf. 4. Please ensure that you refer to Figure 8 in your text as, if accepted, production will need this reference to link the reader to the figure. 5. We note you have included a table to which you do not refer in the text of your manuscript. Please ensure that you refer to Table 1 and 8 in your text; if accepted, production will need this reference to link the reader to the Table. 6. Please upload a copy of Supporting Information Figure/Table/etc. “Supporting information” which you refer to in your text on page 32 in PDF submission. 7. If the reviewer comments include a recommendation to cite specific previously published works, please review and evaluate these publications to determine whether they are relevant and should be cited. There is no requirement to cite these works unless the editor has indicated otherwise. 8. Please review your reference list to ensure that it is complete and correct. If you have cited papers that have been retracted, please include the rationale for doing so in the manuscript text, or remove these references and replace them with relevant current references. Any changes to the reference list should be mentioned in the rebuttal letter that accompanies your revised manuscript. If you need to cite a retracted article, indicate the article’s retracted status in the References list and also include a citation and full reference for the retraction notice. [Note: HTML markup is below. Please do not edit.] Reviewers' comments: Reviewer's Responses to Questions -->Comments to the Author 1. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #1: Yes ********** -->2. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #1: Yes ********** -->3. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #1: Yes ********** -->4. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #1: Yes ********** -->5. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #1: This manuscript addresses the limitations of traditional manual visual classification, which is inefficient and highly sensitive to underwater imaging conditions. The authors propose a deep learning-based multimodal feature fusion framework that combines RGB color information and Sobel edge structural features for fine-grained classification of sea turtle species. The framework incorporates two custom-designed modules, LiteAFNet and AlphaBlendNet, and employs a modified ResNet-50 backbone for feature extraction. The core contribution lies in designing a robust classification system to overcome underwater imaging challenges. Experimental results demonstrate that, compared to the baseline approach, both fusion modules significantly improve classification performance. However, there remain areas where the manuscript could be improved. I recommend minor revision before acceptance, with attention to the following points: 1. In the sections describing LiteAFNet and AlphaBlendNet, it would be beneficial to include parameter-level comparisons with other similar modules. For instance, since LiteAFNet is introduced as a lightweight attention-based fusion module, it could be compared with other attention mechanisms in terms of parameter count. 2. The dataset size is relatively small; the authors are encouraged to expand the dataset or validate the proposed framework on additional datasets to demonstrate its generalization capability. 3. In Table 3 of the Training section, there appears to be a typographical error. The correct training parameters should be provided. 4. Additional comparisons with other commonly used models would strengthen the experimental evaluation. ********** -->6. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #1: No ********** [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step.--> 3 Nov 2025 Response to Reviewers Manuscript Title: A Deep Learning-Based Fusion Framework for Robust Fine-Grained Classification of Sea Turtles in Support of Marine Biodiversity Journal: PLOS ONE Date: [10/24/2025] Dear Academic Editor and Reviewer, We thank you for your thoughtful and constructive feedback. We have revised the manuscript accordingly and believe the changes substantially improve clarity, rigor, and reproducibility. Below we respond point-by-point; all edits are marked in the Revised Manuscript with Track Changes. Reviewer #1 Overall assessment “The manuscript proposes a deep learning-based multimodal fusion framework (RGB + Sobel) with two custom modules (LiteAFNet, AlphaBlendNet) and a modified ResNet-50; both modules improve performance. Minor revision recommended.” Response: We appreciate the positive evaluation and address each item below. 1) Parameter-level comparisons for LiteAFNet and AlphaBlendNet Comment: Include parameter-level comparisons with similar attention/fusion modules (e.g., parameter count). Response (revised): Completed. We added a focused subsection and a summary table that reports the Total parameters of the end-to-end model and Additional parameters introduced by each module under the same ResNet-50 backbone, together with the integration stage of each module. Specifically, the baseline ResNet-50 totals 23.5M params; integrating SE and CBAM yields totals of 26.02M and 26.62M, with module-only additions of +0.12M and +0.18M, respectively. In contrast, our LiteAFNet and AlphaBlendNet keep the model totals at ≈23.52M, introducing only +0.00002M and +0.00003M parameters, respectively i.e., a negligible overhead while still enabling spatial/pixel-level adaptivity. Integration stages are clarified in the table (SE: channel; CBAM: channel+spatial; LiteAFNet: spatial; AlphaBlendNet: pixel-level). Change in manuscript: Added Section “Parameter-Level Comparison of Fusion Modules” and Table 2: Parameter comparison between conventional attention modules and the proposed fusion modules integrated with ResNet-50 (Total Params, Additional Params, Integration Stage); minor cross-references added in Methods. 2) Dataset size and generalization Comment: The dataset is relatively small; expand or validate on additional datasets to demonstrate generalizability. Response: Addressed. We explicitly acknowledge the limited dataset size and strengthened the validation in two ways that are now described in the manuscript: 1. Extensive data augmentation to mitigate overfitting and improve reliability—random rotation, flipping, cropping, and color jittering—applied consistently during training. 2. Stratified 5-fold cross-validation during training and evaluation, ensuring a balanced representation of all seven species in every fold. This protocol lets each image contribute to both training and validation across iterations and yields a more reliable estimate of generalization. Across folds, performance remained stable with only minor variations, indicating strong generalization. AlphaBlendNet achieved F1 = 0.86 ± 0.02 and mAP = 87.2% ± 1.5%, followed by LiteAFNet with F1 = 0.80 ± 0.03 and mAP = 83.4% ± 1.8%. The low standard deviations confirm that both proposed fusion architectures maintain consistent performance across data partitions despite the constrained dataset size. Change in manuscript: Added/expanded text in Data Collection (augmentation and CV protocol) and Quantitative Performance Metrics (5-fold CV results with mean ± SD). 3) Typographical error in Training (Table 3) Comment: There appears to be a typographical error. Please provide the correct training parameters. Response: Corrected. We have updated the training configuration and renumbered the table due to new material added in the Methods. The Parameter Settings are now: • Epochs: 100 • Batch size: 16 • Initial learning rate: 0.0001 • Learning-rate schedule: ReduceLROnPlateau • Input resolution: 224 × 224 × 4 (RGB + Sobel) All in-text citations that previously referred to the old training table were updated to the new numbering. Change in manuscript: Replaced the training table with Table 4. Parameter Settings used for model training. 4) Additional comparisons with commonly used models Comment: Please include more widely used models to strengthen the evaluation. Response: Completed. We integrated two widely adopted lightweight classifiers—MobileNetV3-Large and EfficientNet-B0—and trained/evaluated them under the same experimental protocol as our methods (identical training settings in Table 4 and the same input-fusion pipeline used in the main experiments). We report per-class and macro metrics and analyze accuracy–efficiency trade-offs. • New per-class results. o Table 9 (MobileNetV3-Large): per-class Precision/Recall/F1/mAP; macro F1 = 0.48 and mAP = 45.6%. o Table 10 (EfficientNet-B0): per-class Precision/Recall/F1/mAP; macro F1 = 0.56 and mAP = 53.3%—higher than MobileNetV3-L across most species, but still below our learnable fusion modules. o Figure 9: per-class mAP (%) curves for the seven species now compare Baseline Fusion, LiteAFNet, AlphaBlendNet, MobileNetV3-L, and EfficientNet-B0, showing the consistent advantage of LiteAFNet/AlphaBlendNet over all baselines. • Efficiency analysis. o Table 11 (FLOPs & latency): MobileNetV3-L = 0.47 GFLOPs / 20.55 ms, EfficientNet-B0 = 0.39 GFLOPs / 22.10 ms (single-image inference). o Table 12 (per-class latency): per-species inference times reported for all models; MobileNetV3-L and EfficientNet-B0 remain in the ~20–22 ms range across classes. • Macro-averaged summary. o Table 13 now includes both new models alongside the existing methods: • MobileNetV3-L: Precision 0.52, Recall 0.45, F1 = 0.48, mAP = 45.6%. • EfficientNet-B0: Precision 0.58, Recall 0.54, F1 = 0.56, mAP = 53.3%. • Both trail our LiteAFNet (F1 = 0.80, mAP = 83.4%) and AlphaBlendNet (F1 = 0.86, mAP = 87.2%), confirming that learnable fusion outperforms simple concatenation-based baselines under realistic underwater conditions. Change in manuscript: Added Table 9 and Table 10 (per-class metrics); updated Figure 9 (per-class mAP curves), Table 11 (FLOPs & latency), Table 12 (per-class latency), and Table 13 (macro-averaged metrics). Corresponding narrative updates were made in Results and Discussion to incorporate MobileNetV3-Large and EfficientNet-B0. Journal Requirements • Reference list audit: We reviewed all references, added missing DOIs, corrected metadata, and replaced unverifiable entries with current, citable sources. The revised bibliography reflects these updates. • Figure 8 cross-reference: We inserted explicit in-text citations to Figure 8 where its contents are discussed, ensuring production can generate the appropriate links. • Table cross-references (Tables 1 & 8): We added clear in-text citations to Table 1 (Methods/Data Collection) and Table 8 (Results) so the tables are properly linked in production. We thank the Reviewer and Academic Editor again for the helpful comments that significantly improved our work. We hope the revisions address all concerns satisfactorily. Sincerely, [Corresponding Author’s Name] Parkpoom Chaisiriprasert, Apicha Deearom [Affiliation] College of Digital Innovation Technology, Rangsit University [Email] parkpoom.c@rsu.ac.th, apicha.d67@rsu.ac.th Submitted filename: Response to Reviewers.pdf 15 Nov 2025 -->PONE-D-25-44025R1-->-->A Deep Learning-Based Fusion Framework for Robust Fine-Grained Classification of Sea Turtles in Support of Marine Biodiversity-->-->PLOS ONE Dear Dr. Chaisiriprasert, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process. Please submit your revised manuscript by Dec 30 2025 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:--> A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter. If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. We look forward to receiving your revised manuscript. Kind regards, Yaseen Al-Mulla Academic Editor PLOS ONE Journal Requirements: 1. If the reviewer comments include a recommendation to cite specific previously published works, please review and evaluate these publications to determine whether they are relevant and should be cited. There is no requirement to cite these works unless the editor has indicated otherwise. [Note: HTML markup is below. Please do not edit.] Reviewer's Responses to Questions -->Comments to the Author 1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.--> Reviewer #1: (No Response) ********** -->2. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #1: Partly ********** -->3. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #1: I Don't Know ********** -->4. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #1: Yes ********** -->5. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #1: Yes ********** -->6. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #1: There are currently numerous issues with the writing of the thesis, and the organization of the thesis's logic is chaotic. It is recommended that the paper be revised to ensure that its writing quality meets the research article standards before it is submitted. The specific and more serious problems are as follows. 1. Each section and its corresponding subsections should be hierarchically numbered to reflect the clear structure and logic of the paper. 2. The description of Figure 2 is incomplete, disorganized and not comprehensive. The description from line 174 to 183 on page 6 is incomplete. Obviously, the descriptions of the training and testing phases are missing. 3. The sequence of the subsections under the section "Proposed method" is disordered. It is recommended to follow the image processing process described in Figure 2 and arrange the sub-section titles in the order from top to bottom and from left to right, such as: xx.1 Sobel Filtering, xx.2 Color Histogram Selection, xx.3 Tensor Encode, xx.4 Fusion, xx.4.1 LiteAFNet, xx.4.2 AlphaBlentNet, …….. 4. The section "Parameter-Level Comparison of Fusion Modules" is in an inappropriate position in the paper. It belongs to the experimental analysis results and should not be placed under "proposed method". 5.In the Proposed methods section, the author states that LiteAFNet and AlphaBlend Net belong to the early stages of the entire network and should be trained simultaneously with Res-Net50. However, in Fig. 2, Train is marked after it. Please mark it before to avoid ambiguity. 6.In Table 2, the increase value of the parameter seems to be incorrect. Please provide the correct value or explain the calculation method of Additional Params. 7.It is best to change the "Learning Rate Decay" in Table 4 to "Learning Rate Decay Strategy" to ensure the accuracy of the description. 8. The conclusion of the paper did not discuss the limitations of the research, practical applications of ecology, and future improvement directions. ********** -->7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #1: No ********** [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] To ensure your figures meet our technical requirements, please review our figure guidelines: https://journals.plos.org/plosone/s/figures You may also use PLOS’s free figure tool, NAAS, to help you prepare publication quality figures: https://journals.plos.org/plosone/s/figures#loc-tools-for-figure-preparation NAAS will assess whether your figures meet our technical requirements by comparing each figure against our figure specifications. 26 Nov 2025 Response to Reviewers Manuscript Title: A Deep Learning-Based Fusion Framework for Robust Fine-Grained Classification of Sea Turtles in Support of Marine Biodiversity Journal: PLOS ONE Date: [11/25/2025] Dear Editor and Reviewers, We would like to thank you for the time and effort spent reviewing our manuscript. We appreciate the insightful and constructive comments provided by Reviewer #1. These suggestions have significantly helped us improve the structure, logic, and clarity of our work. We have carefully revised the manuscript in accordance with the reviewer’s comments. Below is a point-by-point response detailing the changes made. Response to Reviewer #1 Comment 1: Each section and its corresponding subsections should be hierarchically numbered to reflect the clear structure and logic of the paper. Response: Thank you for this suggestion. We have restructured the entire manuscript to use hierarchical numbering. All primary sections (1. Introduction, 2. Materials and Methods, 3. Results and Discussion, 4. Conclusions) and their respective subsections (e.g., 2.1, 2.2.1, 2.2.2) are now clearly numbered to improve readability and logical flow. Comment 2: The description of Figure 2 is incomplete, disorganized and not comprehensive. The description from line 174 to 183 on page 6 is incomplete. Obviously, the descriptions of the training and testing phases are missing. Response: We have rewritten the description of the proposed framework to be more comprehensive. Specifically, we have expanded Section 2.2 Proposed Method to explicitly describe the three stages illustrated in Figure 2: (1) Preprocessing, (2) Fusion/Backbone, and (3) Training/Testing. Furthermore, in Section 2.2.6 (Training and Testing), we have added a detailed explanation of the operational flow shown in Figure 2, distinguishing between the "upper path" used for training (optimizing the fusion module and backbone) and the "lower path" used for inference/testing. Comment 3: The sequence of the subsections under the section "Proposed method" is disordered. It is recommended to follow the image processing process described in Figure 2 and arrange the sub-section titles in the order from top to bottom and from left to right. Response: We agree that the structure should mirror the pipeline. We have reorganized Section 2.2 to strictly follow the data flow presented in Figure 2: • 2.2.1 Sobel Filtering (Preprocessing) • 2.2.2 Color Histogram Selection (Preprocessing) • 2.2.3 Tensor Encode (Encoding) • 2.2.4 Fusion Strategy (LiteAFNet and AlphaBlendNet) • 2.2.5 ResNet-50 and Modification (Backbone) • 2.2.6 Training and Testing (Final Output) Comment 4: The section "Parameter-Level Comparison of Fusion Modules" is in an inappropriate position in the paper. It belongs to the experimental analysis results and should not be placed under "proposed method". Response: We have moved this analysis from the Methodology section to the Results and Discussion section. It is now located in Section 3.3.1 Parameter-Level Comparison of Fusion Modules. This placement allows us to discuss the parameter efficiency alongside the quantitative performance metrics (FLOPs and Latency). Comment 5: In the Proposed methods section, the author states that LiteAFNet and AlphaBlend Net belong to the early stages of the entire network and should be trained simultaneously with Res-Net50. However, in Fig. 2, Train is marked after it. Please mark it before to avoid ambiguity. Response: We have revised Figure 2 and the accompanying text in Section 2.2.6 to clearly indicate that the Fusion Strategy is part of the end-to-end training pipeline. The diagram now visually groups the fusion modules within the training block to show that they are optimized jointly with the backbone. Comment 6: In Table 2, the increase value of the parameter seems to be incorrect. Please provide the correct value or explain the calculation method of Additional Params. Response: We appreciate this careful check. In the revised manuscript, the parameter comparison table has been renumbered and is now Table 5 “Parameter comparison between conventional attention modules and the proposed fusion modules integrated with ResNet-50”. We recomputed and corrected all parameter values using torchinfo on the implemented PyTorch models with a 4-channel input (RGB + Sobel) and histogram branch. The updated entries are: • ResNet-50 (Backbone): 24.82663 M parameters • SE Block: 24.82663 M (Additional Params: +0.00000 M) • CBAM: 24.82673 M (Additional Params: +0.00010 M) • LiteAFNet (Ours): 24.82665 M (Additional Params: +0.00002 M) • AlphaBlendNet (Ours): 24.82664 M (Additional Params: +0.00001 M) Comment 7: It is best to change the "Learning Rate Decay" in Table 4 to "Learning Rate Decay Strategy" to ensure the accuracy of the description. Response: We have made this correction. In Table 3 (formerly Table 4), the parameter is now labeled "Learning Rate Decay Strategy," and the value is specified as "ReduceLROnPlateau." Comment 8: The conclusion of the paper did not discuss the limitations of the research, practical applications of ecology, and future improvement directions. Response: We agree that the conclusion should more explicitly address limitations, ecological applications, and future work. The Conclusions section (Section 4) has been substantially expanded and reorganized into three parts: 1. Summary of contributions and main findings: • We restate that integrating RGB, Sobel edge structure, and color histograms with adaptive fusion (LiteAFNet and AlphaBlendNet) significantly improves fine-grained sea turtle classification. • We summarize the key macro metrics, emphasizing that AlphaBlendNet achieved F1-score 0.86 and mAP 87.2%, with LiteAFNet providing an accuracy–efficiency trade-off. 2. Practical ecological applications: • We now explicitly discuss how the framework can support coastal and reef monitoring, UAV-based surveys, and fixed camera systems, helping to reduce manual annotation burdens and enabling high-frequency monitoring of sea turtle presence and abundance. • We explain how integrating automated classification with spatiotemporal metadata can assist in tracking habitat use, migration patterns, and ecological responses to environmental changes. • We highlight that LiteAFNet is particularly suited for edge deployment on low-power field devices, whereas AlphaBlendNet serves as a high-precision backend for large archival datasets. 3. Limitations and future improvement directions: We now explicitly list several limitations: • Dataset limitations: The current dataset is restricted to seven sea turtle species and may not fully capture global underwater variability (different water qualities, regions, and imaging conditions). • Domain generalization: We note that generalization to extreme turbidity or night-time imagery has not been fully tested and requires further validation. • Single-frame modeling: The present framework operates on single images and does not yet exploit temporal information from videos, which could help with occlusions and ambiguous views. • Hardware diversity: FLOPs and latency were measured on a single GPU platform; more comprehensive benchmarking across heterogeneous hardware (embedded GPUs, CPUs, edge accelerators) is needed. • Human-in-the-loop validation: While we used Grad-CAM for visual interpretability, we acknowledge that formal user studies with marine biologists are needed to rigorously evaluate trust and usability. For future work, we now explicitly state that: • We will broaden the taxonomic scope primarily by augmenting data with additional sea turtle subpopulations, and then extend to freshwater turtle species (Order Testudines) to test generalization across different aquatic ecosystems. • We plan to integrate temporal modeling (e.g., transformer-based video architectures) to leverage motion continuity. • We will explore semi-supervised domain adaptation to mitigate domain shifts during long-term monitoring. • We aim to optimize the models for autonomous platforms such as underwater vehicles or smart buoys to enable large-scale, field-ready biodiversity monitoring. We thank the Reviewer and Academic Editor again for the helpful comments that significantly improved our work. We hope the revisions address all concerns satisfactorily. Sincerely, [Corresponding Author’s Name] Parkpoom Chaisiriprasert, Apicha Deearom [Affiliation] College of Digital Innovation Technology, Rangsit University [Email] parkpoom.c@rsu.ac.th, apicha.d67@rsu.ac.th Submitted filename: [mje] Response to Reviewers.docx 26 Dec 2025 -->PONE-D-25-44025R2-->-->A Deep Learning-Based Fusion Framework for Robust Fine-Grained Classification of Sea Turtles in Support of Marine Biodiversity-->-->PLOS One Dear Dr. Chaisiriprasert, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.-->--> Please submit your revised manuscript by Feb 09 2026 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:--> A letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. A letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. -->If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter. If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. We look forward to receiving your revised manuscript. Kind regards, Yaseen Al-Mulla Academic Editor PLOS One Journal Requirements: 1. If the reviewer comments include a recommendation to cite specific previously published works, please review and evaluate these publications to determine whether they are relevant and should be cited. There is no requirement to cite these works unless the editor has indicated otherwise. 2. Please review your reference list to ensure that it is complete and correct. If you have cited papers that have been retracted, please include the rationale for doing so in the manuscript text, or remove these references and replace them with relevant current references. Any changes to the reference list should be mentioned in the rebuttal letter that accompanies your revised manuscript. If you need to cite a retracted article, indicate the article’s retracted status in the References list and also include a citation and full reference for the retraction notice. [Note: HTML markup is below. Please do not edit.] Reviewers' comments: Reviewer's Responses to Questions -->Comments to the Author 1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.--> Reviewer #2: (No Response) Reviewer #3: All comments have been addressed ********** -->2. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #2: Yes Reviewer #3: Yes ********** -->3. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #2: Yes Reviewer #3: Yes ********** -->4. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #2: Yes Reviewer #3: No ********** -->5. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #2: Yes Reviewer #3: Yes ********** -->6. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #2: The manuscript technically sounds good and has statistical analysis appropriately and rigorously presented in an intelligible fashion, but you need to adjust/modify the paper following the article journal template. See the published PDF paper. 1- you mention that the image data were sourced from publicly available feature that debended in the study, are you mean (the properties in the dataset), if that, which feature you depend on your study, and if you reduce dimention of the feature, what is the method used to reduce the dimention of the feature, and why choose these. if not, so need to clarify the meaning of (the image data were sourced from publicly available feature ) 2- the paper mention to sobel filter two times as a subtitle, should be not. 3- the study should clearer explanation about why use sobel not anothers. 4-The sequence of the subsections under the section 'Proposed method' is disordered 5- The "Parameter-Level Comparison of Fusion Modules" section should not be placed under "proposed method". 6- The conclusion should be reformulated to be clearer, did not discuss the limitations of the research, practical applications of ecology, and should referring to the results obtained and on which the methods were compared to arrive at the best method. Reviewer #3: The authors have made substantial efforts to enhance the manuscript based on the previous reviewers comments. However, I would suggest providing raw data and scripts attached as a supplement or shared through a sharing platform like git to ensure transparency and repeatability of the analysis. In addition, postpublication peer reviewers will require these raw data and raw scripts for independant verification of the claims. ********** -->7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #2: Yes: Nada Al-okbi Reviewer #3: Yes: Thiru Somasundaram ********** [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] To ensure your figures meet our technical requirements, please review our figure guidelines: https://journals.plos.org/plosone/s/figures You may also use PLOS’s free figure tool, NAAS, to help you prepare publication quality figures: https://journals.plos.org/plosone/s/figures#loc-tools-for-figure-preparation. NAAS will assess whether your figures meet our technical requirements by comparing each figure against our figure specifications. --> 30 Jan 2026 We have carefully revised the manuscript by thoroughly addressing all the reviewers’ comments and suggestions, which we believe have significantly improved the quality and clarity of the manuscript. A detailed, point-by-point response to the reviewers is provided in the response document, and all changes have been clearly indicated in the revised manuscript. Submitted filename: Response to Reviewers.docx 27 Feb 2026 A Deep Learning-Based Fusion Framework for Robust Fine-Grained Classification of Sea Turtles in Support of Marine Biodiversity PONE-D-25-44025R3 Dear Dr. Chaisiriprasert, We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements. Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication. An invoice will be generated when your article is formally accepted. Please note, if your institution has a publishing partnership with PLOS and your article meets the relevant criteria, all or part of your publication costs will be covered. Please make sure your user information is up-to-date by logging into Editorial Manager at Editorial Manager® and clicking the ‘Update My Information' link at the top of the page. For questions related to billing, please contact billing support. If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org. Kind regards, Yaseen Ahmed Al-Mulla Academic Editor PLOS One Additional Editor Comments (optional): Reviewers' comments: Reviewer's Responses to Questions -->Comments to the Author 1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.--> Reviewer #2: All comments have been addressed ********** -->2. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #2: Yes ********** -->3. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #2: Yes ********** -->4. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #2: Yes ********** -->5. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #2: Yes ********** -->6. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #2: (No Response) ********** -->7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #2: No ********** PONE-D-25-44025R3 PLOS One Dear Dr. Chaisiriprasert, I'm pleased to inform you that your manuscript has been deemed suitable for publication in PLOS One. Congratulations! Your manuscript is now being handed over to our production team. At this stage, our production department will prepare your paper for publication. This includes ensuring the following: * All references, tables, and figures are properly cited * All relevant supporting information is included in the manuscript submission, * There are no issues that prevent the paper from being properly typeset You will receive further instructions from the production team, including instructions on how to review your proof when it is ready. Please keep in mind that we are working through a large volume of accepted articles, so please give us a few days to review your paper and let you know the next and final steps. Lastly, if your institution or institutions have a press office, please let them know about your upcoming paper now to help maximize its impact. If they'll be preparing press materials, please inform our press team within the next 48 hours. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org. You will receive an invoice from PLOS for your publication fee after your manuscript has reached the completed accept phase. If you receive an email requesting payment before acceptance or for any other service, this may be a phishing scheme. Learn how to identify phishing emails and protect your accounts at https://explore.plos.org/phishing. If we can help with anything else, please email us at customercare@plos.org. Thank you for submitting your work to PLOS ONE and supporting open access. Kind regards, PLOS ONE Editorial Office Staff on behalf of Dr. Yaseen Ahmed Al-Mulla Academic Editor PLOS One