Realization of fermionic Laughlin state on a quantum processor Authors: Lingnan Shen, Mao Lin, Cedric Yen-Yu Lin, Di Xiao, Ting Cao Published: 2026 ABSTRACT AbstractStrongly correlated topological phases of matter are central to modern condensed matter physics and quantum information technology but often challenging to probe and control in material systems. The experimental difficulty of accessing these phases has motivated the use of engineered quantum platforms for simulation and manipulation of exotic topological states. Among these, the Laughlin state stands as a cornerstone for topological matter, embodying fractionalization, anyonic excitations, and incompressibility. Although its bosonic analogs have been realized on programmable quantum simulators, a genuine fermionic Laughlin state has yet to be demonstrated on a quantum processor. Here, we realize the ν = 1/3 fermionic Laughlin state on IonQ’s trapped-ion quantum computer using an efficient and scalable Hamiltonian variational ansatz with 369 two-qubit gates on a 16-qubit circuit. Employing symmetry-verification error mitigation, we extract key observables that characterize the Laughlin state, including correlation hole, bulk-edge correspondence, and topological entanglement entropy, with strong agreement to exact diagonalization benchmarks. This work demonstrates an end-to-end workflow to simulate material-intrinsic topological orders and provides a starting point to explore its dynamics and excitations on digital quantum processors.Subject terms: Quantum simulation, Quantum Hall, Quantum information Introduction Topological phases of matter, which defy the conventional Landau symmetry-breaking paradigm, forms a foundation of modern condensed matter physics1, underpin phenomena such as the fractional quantum Hall (FQH) effect2,3 and quantum spin liquids4. Beyond their fundamental significance, these topological orders play a central role in fault-tolerant topological quantum computation due to their ground-state degeneracy and anyon excitations5–7. Currently, two primary approaches exist for realizing topological order: synthetic order on quantum simulators and processors, and intrinsic order in material systems. The past decade has witnessed significant progress in realizing the synthetic topological order8–10, demonstrating the feasibility of noisy intermediate-scale quantum (NISQ) devices11 as a controllable experimental platform. These breakthroughs have primarily relied on exactly solvable model Hamiltonians with straightforward mathematical structures, such as the toric code12 and the D(D4) quantum double model13, to construct optimal shallow circuits achievable on current NISQ devices. While synthetic topological orders have advanced rapidly alongside the development of NISQ devices, the quest to realize material-intrinsic topological orders, such as the FQH effect, fractional Chern insulator, and quantum spin liquid, remains largely confined to solid-state devices2,14–17. These realizations are inherently challenging due to the stringent conditions required for topological phases to emerge, including careful material selection and precise control over interactions, disorder, and temperature. The scarcity of material platforms hosting intrinsic topological order has fueled great interest in exploring such exotic phases with programmable quantum simulators18–23. Quantum processors, in particular, offer a unique opportunity to simulate and explore a class of many-body Hamiltonians that host material-intrinsic and topologically ordered phases, enabling access to regimes beyond current experimental reach. However, a major obstacle remains: a general framework that simultaneously respects the topological order and the entanglement structure—whether governed by an area or volume law—remains elusive. Unlike synthetic models, where interactions can be designed to achieve exact solvability, intrinsic topological phases in materials arise from strong electron-electron interactions that lack simple mappings to shallow quantum circuits. Overcoming this challenge requires balancing circuit efficiency, physical fidelity, and computational scalability, as realizing topological order on quantum processors necessitates deep unitary circuits to capture their defining long-range entanglement, which can quickly become infeasible on NISQ devices. In this work, we realize the fermionic ν = 1/3 Laughlin state24, a paradigmatic example of topological phases of matter, on IonQ’s trapped-ion quantum computer using a protocol based on Hamiltonian variational ansatz (HVA). By leveraging the hierarchical structure of the Laughlin parent Hamiltonian, our ansatz construction minimizes circuit depth while preserving the symmetries of the system. This symmetry-preserving construction provides scalability, reduces classical optimization complexity, and enables a symmetry-verification protocol for error-mitigation, making it especially suitable for hardware implementations. We successfully prepare the fermionic Laughlin state on a 16-qubit system with 369 two-qubit gates. We verify the successful preparation by directly measuring, on the quantum processor, the characteristic microscopic and topological diagnostics of the Laughlin state, including bulk-edge density structure, correlation holes, and topological entanglement entropy, which show strong agreement with exact-diagonalization (ED) benchmarks. We deem the preparation successful only when these independent diagnostics are simultaneously satisfied, providing mutually reinforcing evidence for the target topological phase. This suite of FQH-specific, observable-centric criteria provides a problem-tailored benchmark for future simulations in regimes without classical ground truth, enabling digital quantum processors to make genuinely predictive statements about competing strongly correlated phases and their emergent properties. This work thus represents the realization of a fermionic ν = 1/3 Laughlin state on a digital quantum processor using an end-to-end workflow. Our synergistic integration approach of Hamiltonian design, ansatz construction, and error mitigation strategy establishes a concrete workflow for digital simulations of strongly correlated topological matter and opens a route to harnessing topological orders for both fundamental physics research and quantum-information applications. Results The model We realize the topologically ordered Laughlin state on a quantum processor through constructing an HVA for its parent Hamiltonian defined by the following effective one-dimensional fermion chain model25,26 on a cylinder geometry (see Methods) where cj† and cj are the fermionic creation and annihilation operators corresponding to the single-particle orbitals under the Landau gauge. Physically, the index j specifies the x-coordinate of Gaussian-localized electron wave functions (Fig. 1a). The interaction matrix elements Vkm implement the Haldane-Trugman-Kivelson pseudopotential27,28, under which the ν = 1/3 Laughlin state (referred to as exact state throughout this work) is an exact ground state. This repulsive interaction decays at different rates for different interaction ranges (k + m) as the cylinder’s circumference Ly increases. Cylinder geometry and interaction truncation effect on Laughlin state. a Schematic of cylinder geometries in Tao-Thouless (thin-cylinder) limit Ly → 0 and the isotropic geometry limit Lx ≈ Ly corresponding to Ly ≈ 10 in (b). The Gaussian peaks illustrate the localized orbitals of the lowest Landau level along the axial direction, with spacing 2πlB2/Ly where lB is the magnetic length. Opacity of the Gaussian peaks represent local electron density. b Fidelity between the exact state and the ground state of the effective Hamiltonian for various truncation ranges of interactions (k + m ≤ 3, 4, and 5) in Eq. (1) for system with number of electrons Ne = 6, 7, and 8. The cylinder’s height Lx is determined through the constraint NΦ = LxLy/(2π) where NΦ is the number of flux quanta in the system and satisfies NΦ = 3Ne − 2 (see “Methods”). Lines are guide to the eye. It is important to recognize that the exact state’s defining behaviors, such as incompressible quantum liquid correlations and long-range entanglement, are not universally captured by the ground state of Eq. (1) for arbitrary Ly. Its characteristics are hosted by the ground state of Eq. (1) only near the isotropic geometry limit when the cylinder’s circumference (Ly) matches its height (Lx)25. Strong deviations from it, such as the Tao-Thouless (TT) limit (Ly → 0), where the ground state becomes a charge-density-wave (CDW) state ΨCDW=100100100... (Fig. 1(a)), and the squeezed cylinder limit (Ly → ∞), where the system is collapsed into a one-dimensional Luttinger liquid, lead to unfaithful description of exact state’s physical behavior. Due to the two-body interactions in Eq. (1), the full Hamiltonian H contains O(N3) terms for N orbitals, making variational ansatz based on the full Hamiltonian impractical for large system sizes. To address this, we develop an efficient and scalable protocol that constructs a HVA with an effective Hamiltonian Heff which retains only the dominant terms for correlated topological electronic systems (see Methods). In this protocol, the terms in Heff are selected and validated following two criteria: (i) quantitative fidelity of wavefunction, and (ii) qualitative preservation of topology, entanglement, and symmetry. The first criteria is universal for quantum simulations of molecules and solids. The terms in Heff may be identified heuristically by their large ∣Vkm∣, which determines the term’s energy scale. Their validity can be further verified via ED within computationally viable regimes by comparing the wavefunction overlap and low-energy spectra of Heff and H. The second criteria is specific for the topologically ordered states. Qualitatively, we ensure the target state retains its defining properties—such as symmetry and topological order by verifying that Heff belongs to the same topological class as H, using topological invariants, entanglement entropy, or symmetry classifications. Since FQH states are governed by short-range correlations, we expand Eq. (1) by interaction range (k + m) and evaluate the fidelity F, defined as the wavefunction overlap between the exact state and the ground state of Heff consisting of truncated interactions as a comparative diagnostic across truncation ranges, rather than as an absolute threshold. This quantifies how well Heff captures the exact state’s key features. Figure 1b shows that from the TT limit to Ly < 7, all truncations regardless of the interaction range yield high fidelity. But as we approach the isotropic geometry regime Ly ≈ 10, the exact state’s strong correlation and long-range entanglement kicks in. As a result, F drops at significantly different rate depending on the truncations range. With only the lowest-order scattering (k + m≤3), F drops to 0.8 at Ly = 10 for system with number of electrons Ne = 6, whereas including longer-range interactions (k + m ≤ 4, 5) increases F to 0.95 and essentially 1.0, respectively. Following the second criterion, we study how the interaction truncation range affects topology and entanglement. With only the lowest-order scattering (k + m≤3) included, the action of the effective Hamiltonian HTT on the CDW state ΨCDW forms a Krylov subspace K(HTT,ΨCDW). As an example of Hilbert space fragmentation29, this can be used to map FQH model, such as the Laughlin state’s parent Hamiltonian, under TT limit onto exactly solvable spin models30,31. This Krylov subspace K is significantly smaller than the full Hilbert space of a generic exact state. As a result, the second Rényi entanglement entropy SA(2)=−lnTrρA2 of the HTT ground state, computed for a subsystem A of the cylinder, rapidly saturates to a finite value as the subsystem boundary Ly increases toward the isotropic limit. This behavior signals a breakdown of area law scaling and the loss of the exact state’s correlation structure. In contrast, extending the truncation range to (k + m≤4) or higher restores the linear scaling of SA(2) with Ly, recovering the expected area law behavior of a topological quantum liquid (See Supplementary Information). Based on the quantitative criteria of fidelity and qualitative criteria of topology and entanglement, we choose k + m ≤ 4 as the truncation range of interactions in Heff. While incorporating longer-range interactions (k + m ≥ 5) can marginally improve fidelity, it does not qualitatively affect the topology or entanglement properties of the ground state. On the other hand, it significantly increases the complexity of the HVA circuit, pushing it beyond the capabilities of current NISQ devices. Thus, we conclude the minimal Heff for constructing the HVA for the ν = 1/3 Laughlin state includes the following interaction terms where n^j=cj†cj is the density operator. We note that at the interaction range k + m = 4, we retain only the off-diagonal scattering term V31 in Heff, which plays a crucial role in shaping the wavefunction structure and avoiding Hilbert space fragmentation. In contrast, V40, despite falling within the same interaction range, is a diagonal electrostatic term that primarily results in energy shifts without significantly influencing the wavefunction. To further reduce circuit depth, we exclude V40 from Heff (see Supplementary Information). Quantum circuit for state preparation With Heff identified based on our selection criteria, we construct the corresponding state preparation circuit in HVA fashion to simulate the Laughlin state on a quantum processor, with the expected HVA repetition p scaling linearly with the system size; the number of variational parameters per repetition being constant, so the total parameter count scales as O(p). We interpret the HVA as a digitized adiabatic protocol generated by a local effective Hamiltonian32. Lieb-Robinson bounds on the spread of correlations under local dynamics imply an effective light cone with finite velocity33. We therefore expect that, for our Laughlin state HVA, the number of repetitions p must grow at least linearly with the system size in order to faithfully reproduce the long-range entanglement structure of the topological phase. As we show below, our ansatz also achieves a linear scaling of the total number of variational parameters by generalizing parameters in an HVA layer across the lattice. This avoids the quadratic or worse parameter growth that would result from assigning independent parameters to every microscopic term and aligns with previous work showing that constrained HVA remains expressive while improving trainability32,34,35. The state preparation circuit ∣ψ({βj})⟩eff, shown in Fig. 2, is given by the following unitaries where βkm are variational parameters. The sum of indices are implicitly bound by the system size. The construction and optimization of ∣ψ({βj})⟩eff is guided by two fundamental principles. Firstly, we generalize the variational parameters βkm throughout the lattice, due to the similarity in mathematical structures at different j [Eq. (1)]. In practice, this means that all gates within the same unitary U^km share the same parameter βkm, yielding a constrained HVA32,34 with one variational parameter per physical generator U^km rather than one per microscopic term. As a result, each HVA repetition uses five independent parameters, independent of the system size. This dimensionality reduction of parameter space not only simplifies the variational optimization but also ensures the total number of parameters grows only through the number of HVA repetitions p, i.e., Nparam~O(p)∝Ne (see Supplementary Information for explicit circuit gate and depth). Secondly, the squeezing rule in FQH36 requires U^21 as the first layer of the circuit which only contains terms with j=3n,n∈Z. Schematic N-qubit Hamiltonian variational ansatz circuit for preparing the ν = 1/3 Laughlin state. The initial state is taken as the charge-density wave state Ψ0=100100....1001, where we use the Jordan-Wigner transformation in this work68. Commuting operators in U^km are executed in parallel. We show the structure of U^20 layer as an example (see Supplementary Information for a full state preparation circuit at Ne = 6). Using classical simulator (noiseless), we optimize βkm for the exact state in the isotropic geometry regime (see “Methods”), and demonstrated that the optimized parameters obtained with Ne = 6 can be transferred to larger systems as warm starts, assuming a fixed HVA repetition p. The optimized parameters βkm achieves F=0.93 compared with the exact state, the ground state of the full Hamiltonian (1) obtained by ED at Ne = 6. Since the fidelity between the ground state of Heff and the exact state decays naturally with system size Ne (Fig. 1), we expect the fidelity between ∣ψ({βj})⟩eff and the exact state to follow the same trend when we transfer the optimized parameters to larger systems. Figure 3a shows the fidelity scales as expected for larger systems up to Ne = 10. Optimizing ∣ψ({βj})⟩eff with larger system size did not achieve higher fidelity (see Supplementary Information), further supporting parameter transferability and our construction’s resilience to barren plateau35. This smooth transferability suggests that parameters optimized on smaller systems provide high-quality warm starts for larger systems, reducing classical optimization costs and mitigating trainability issues when one subsequently increases the HVA repetition p with system size. Finite-depth scaling of fidelity and intensive quantities for the optimized protocol in the isotropic geometry regime. a Fidelity between the state preparation circuit and ground state obtained by ED for system with number of particle Ne = 6–10. (Blue triangle) Fidelity between ∣ψ({βj})⟩eff and Ψeff, ground state of Heff. (Red circle) Fidelity between ∣ψ({βj})⟩eff and the exact state ∣Ψexact⟩. b Average deviation of local density δ〈nj〉. (c) Average deviation of two-point correlation function δ〈Cij〉. In (b, c), deviation of the quantity 〈x〉 is defined as δ⟨x⟩=∣⟨x⟩′−⟨x⟩exact∣, where 〈x〉exact is the exact state’s value and ⟨x⟩′ corresponds to Ψeff or ∣ψ({βj})⟩eff. All error bars indicate the 16th and 84th percentiles. Lines are guide to the eye. Notably, the average deviation of intensive quantities, such as the local density and two-point correlation between ∣ψ({βj})⟩eff and the exact state, remain constant with increasing system size (Fig. 3b, c). This observation strengthens the smooth transferability and suggests that for Heff considered here, reproducing local physics with high accuracy, does not require large prefactors in the linear depth scaling of the HVA. As such, our protocol can be extended sensibly to near-term quantum simulations of strongly correlated topological systems at scale. Lastly, the Hamiltonian in Eq. (1) exhibits both particle number conservation N^=∑jn^j and center-of-mass coordinate conservation K^=∑jjn^j(modN). The unitaries U^km composing our state preparation circuit naturally respect these symmetries, constraining the subspace of the variational search. Similarly, the final state ∣ψ({βj})⟩eff must transform identically under these symmetries as the initial state Ψ0, enabling symmetry-verification protocols for robust error-mitigation37,38. Edge and bulk density structure We next proceed to prepare and probe the Laughlin state on quantum processors. A key question we sought to address was whether a deep quantum circuit, involving hundreds of two-qubit gates but only a few variational parameters, could successfully capture the physics of strongly correlated topological states on NISQ devices. While the cost of storing and manipulating many-body wavefunctions grows exponentially on classical hardware, this experiment, if successful, would be an important step toward scalable quantum simulations for materials-intrinsic topological order on near-term quantum processors. Given the depth of the circuit, i.e., 369 two-qubit gates for Ne = 6, we selected a trapped-ion quantum processor (IonQ’s 25-qubit Aria-1) for its relatively high two-qubit gate fidelity and low readout error rates, both of which are critical for mitigating noise and enabling effective post-selection strategies (see Methods). One of the defining features of the quantum Hall states is the existence of chiral edge modes. On the cylinder geometry, the bulk-boundary correspondence39,40 guarantees the presence of chiral edge modes, which emerge from the bulk’s nontrivial topological order and appear as oscillatory deviations in the local density structure near the physical boundary41. We can directly probe this edge structure in the prepared state by measuring the local density operator ⟨nj⟩=⟨cj†cj⟩ where nj=12(1−Zj) under Jordan-Wigner transformation. In Fig. 4, we present the measured 〈nj〉 obtained by executing our state preparation circuit for Ne = 6 on Aria-1. Despite the limitation of current NISQ devices, the edge density structure is distinctly identified with an overdensity near the system boundaries (j = 0, 15) and subsequent oscillatory deviations of 〈nj〉 from the bulk filling fraction ν = 1/3. Away from the boundaries, the bulk region exhibits a relatively uniform density plateau, signaling the incompressibility and homogeneity nature of the topologically ordered Laughlin state. This spatial structure - a compressible, gapless edge surrounding an incompressible bulk - is an emblematic signature of FQH liquids. Probing edge and bulk density structure. 〈nj〉 is the observed electron occupation at site j, obtained by sampling 5000 shots on IonQ's Aria-1 quantum computer with symmetry-verification postselection (PS) and debiasing error-mitigation (red triangle), which leads to a 10% selection rate. Error bars indicate 68% confidence intervals obtained by means of percentile bootstrap. These results are compared with noiseless simulation of state preparation circuit (orange square) and exact values obtained by ED (blue circle). Lines are guide to the eye. The ability to resolve these edge structures relies critically on the symmetry-verification error mitigation that is naturally supported by our state preparation circuit. On the day of execution, Aria-1 reports a mean two-qubit gate fidelity of 98.5%. With approximately 300 two-qubit gates per qubit’s light-cone, a naive estimate implies a circuit fidelity of 1%, making error mitigation crucial to retrieve meaningful information from experiments on NISQ device. To address this challenge, we employ a combined error mitigation strategy: a custom symmetry-verification postselection protocol alongside IonQ’s debiasing mitigation scheme42. The postselection depends on the conservation of particle number and center-of-mass coordinate that are both respected by our state preparation circuit. Any measured bitstrings violating either of these two symmetries are deemed unphysical and thus discarded during postselection. With IonQ’s debiasing mitigation alone, the result displays a systematic drift towards 〈nj〉 = 0.5, corresponding to the expectation value from a maximally mixed state, though the overall trend aligns qualitatively with the exact value obtained by ED. The application of symmetry-verification postselection significantly improves the fidelity of the results, eliminating the drift and confirming the observation of Laughlin state’s edge density structure (see Supplementary Information for debiasing only data and details on postselection). Spatial correlation and topological entanglement entropy After establishing the presence of edge modes, we turn to investigate the incompressible bulk region of the prepared Laughlin state. In the bulk region, the Laughlin state behaves as an interacting incompressible quantum liquid. This results in a uniform featureless bulk density but leaves nontrivial spatial fingerprints in the wavefunction. To investigate such spatial characteristics, we measure the two-point correlation function Cij = 〈ninj〉 − 〈ni〉〈nj〉 between site i and j. By construction, Cij is inversion-symmetric, that is, Cij = Cji and approaches 1 (−1) when the electron densities are correlated (anticorrelated). With debiasing mitigation alone, we observe clear spatial signatures of anticorrelation in the first two off-diagonal elements of Cij, consistent with repulsive interactions (see Supplementary Information). After applying symmetry-verification postselection (Fig. 5a), we fully resolve the spatial correlation contrast of the correlated electron liquid. Additionally, long-wavelength density fluctuations are strongly suppressed as Cij converges rapidly to zero as ∣i − j∣ increases. The long-range correlation remains negligible in the bulk, except near the system’s boundaries where edge effects dominate. Spatial correlations and incompressibility of the prepared Laughlin state. a Two-point correlation function Cij between site i and j obtained from results after debiasing and postselection (PS) closely align with ED benchmark. We set Cij = 0 for i≤j. b Site-averaged correlation C(d) over sites separated by d = ∣i − j∣. We include only site index i, j ∈ [2, 13] when calculating C(d) to avoid boundary effect. Error bars indicate 68% confidence intervals obtained by means of percentile bootstrap. Lines are guide to the eye. We further compute the site-averaged correlation function C(d)=Cj,j+d¯ as a function of the separation distance d = ∣i − j∣ and observe characteristic fluctuations in the short-range correlation of the prepared Laughlin state. The first two sites near each boundary are excluded to minimize edge effects. The results, shown in Fig. 5(b), reveal a strong correlation hole C(d) < 0 at short distances (d < 4), signifying the underlying repulsive nature of Laughlin state. The medium-range oscillations in C(d) reflect a short-range solid-like order, characteristic of a strongly coupled plasma. Such oscillations are a hallmark of the strongly correlated FQH liquid43. Beyond d ≥ 7, C(d) decays rapidly to zero, representing a featureless and homogeneous liquid at long range. Not only does C(d) from our prepared Laughlin state exhibit qualitative agreement across all distance ranges, but it also quantitatively captures the precise maxima and minima, as well as the spatial extent of the correlation hole. To demonstrate entanglement behavior beyond pairwise correlation, we directly measured the topological entanglement entropy γtopo44,45 of our prepared state via geometric deformation of the cylinder circumference Ly on the quantum processor. This quantity, which reflects the quantum dimension of anyonic excitations, serves as a robust diagnostic of topological order. We optimized the HVA ansatz ψ({βj})eff for a range of Ly ∈ [6, 10] near the isotropic geometry limit, and applied a randomized measurement protocol46 to estimate the second-order Rényi entropy SA(2)=−lnTrρA2 for three different subsystem partition A in the bulk region. (see Supplementary Information for details) In Fig. 6, the experimentally measured SA(2) shows the expected area-law scaling SA(2)=αLy−γtopo with a systematic drift to higher entropy due to hardware noise when compared to noiseless simulator benchmark. Fitting the measured second-order Rényi entropy to the area-law scaling, we extracted −γexp=−0.92±0.17 (68% confidence interval by bootstrap resampling of finite-shot randomized measurement estimator, see Methods). For the ideal ν = 1/3 Laughlin state, −γtopo=−ln347–49 and because our system partition introduces two entanglement boundaries, the expected value is −γtopo=−2ln3≈−1.10. The consistent behavior in SA(2) and γtopo between our experiments and the theory provides compelling evidence of the topological order of the prepared ν = 1/3 Laughlin state. Our pairwise correlation and entanglement entropy measurements demonstrate the ability to access microscopic structures that underlies topologically ordered states on a quantum processor. Topological entanglement entropy. The second-order Rényi entropy SA(2) of the six-qubit subsystem as a function of cylinder circumference Ly. Red triangles represent experimental data obtained on IonQ's Forte-1 quantum computer using randomized measurements with an ensemble size of NU = 200 unitaries and NM = 300 shots per unitary. The result is compared with noiseless simulation of the variationally optimized HVA (orange square). Dashed lines indicate linear fits to the area law form S2(Ly) = αLy − γ. The noiseless simulation yields αHV A = 0.249 and − γHV A = − 1.09. Experimental fit yields αexp=0.245±0.021 and −γexp=−0.92±0.17. Error bars indicate 68% confidence intervals obtained by means of percentile bootstrap. Inset: Schematic of the orbital partition. The system is partitioned into a bulk subsystem A and the environment B, illustrating the two spatial cuts contributing to the entanglement entropy. Discussion In summary, we realized a strongly correlated topological order on IonQ’s trapped-ion quantum computer by preparing the ν = 1/3 Laughlin state using an efficient and scalable HVA. We validated our experiment by extracting FQH phase-diagnostic observables from hardware and sets a benchmark for future experiments on larger, classically intractable systems. Beyond the Laughlin state, our method can be extended to quasiparticle states50 as well as to more complex non-Abelian topological order such as the Moore-Read51 and Read-Rezayi52 states. The realization of these exotic phases would mark a significant step towards exploring exotic topological phases, providing a robust platform for exploring Abelian and non-Abelian braiding statistics through adiabatic quasiparticle transport53, edge and bulk excitations, and nonequilibrium dynamics such as emergent graviton modes in FQH systems54. Moreover, the ability to prepare these exotic states position our approach as a promising testbed for benchmarking next-generation quantum processors. In addition, our work demonstrates a hardware-validated end-to-end workflow for studying strongly correlated topological materials. Unlike classical methods, which are fundamentally constrained by exponential complexity, our quantum simulation workflow provides a scalable route to access key properties of these systems such as phase stability, low-energy excitations, and response functions by directly preparing and probing these states on quantum processors. Moreover, our protocol is well positioned as a practical state-initialization routine for a broader class of quantum algorithms55–58 where high-quality initial states substantially improve algorithm’s convergence and practical performance. Taken together, these features position our protocol as a versatile building block for the digital simulation and diagnosis of topological quantum matter. Methods Fractional quantum Hall Hamiltonian We consider two-dimensional (2D) interacting electron gas subject to a perpendicular magnetic field B on a cylinder geometry, where Lx and Ly denote the length and circumference, respectively, and NΦ = LxLy/(2π) specifies the total number of magnetic flux quanta threading the cylinder. For finite cylinder geometries, the number of flux quanta satisfies NΦ = 3Ne − 2, where Ne is the number of electrons41,59. Throughout this work, we set the magnetic length lB≡ℏeB to unity for simplicity. Under the Landau gauge A=Bxy^ where y^ is the direction of the circumference of the cylinder, the problem is reduced from a 2D continuum system to an effective one-dimensional (1D) lattice model. For spinless electrons within the l-th Landau level, the two-body interaction assumes the following 1D lattice model25,26 where cj† and cj are the fermionic creation and annihilation operators for single-particle orbital ψl,j(r) with j being the index for both the x^ center-of-mass coordinate and the y^ momentum eigenvalue. For example, the associated single-particle orbital for the lowest Landau level (l = 0) on a cylinder is The matrix element Vj1,j2,j3,j4(l) is obtained by projecting the two-body interaction onto the space spanned by ψl,j(r). The Hamiltonian Hl can be further simplified to To study the ν = 1/3 Laughlin state, we focus on the lowest Landau level and adopt the Haldane-Trugman-Kivelson pseudopotential27,28 which guarantees the ν = 1/3 Laughlin state as the exact ground state. The corresponding matrix elements in LLL are given by ref. 26 which physically represents a short-ranged repulsion in the guiding center coordinates that penalizes electrons being too close. Efficient Hamiltonian variational ansatz Hybrid quantum-classical algorithms38,60–64 provide a viable strategy for quantum simulations in the NISQ era by employing shallow, parameterized circuits refined through classical optimization. Among the proposed approaches, HVA has emerged as a promising candidate32. Consider a general Hamiltonian, where cj are scalars and h^j are operators. A single repetition of HVA is constructed using unitary evolution operators, where βj are variational parameters and Ψ0 is an initial state that can be easily prepared. The variational parameters are classically optimized against a loss function. This flexibility allows state preparation with much shallower circuit compared to circuit mimicking a trotterized annealing processes. After decomposing the correlated topological electronic Hamiltonian where Heff is an effective Hamiltonian retaining the essential interactions and H′ contains the subdominant contributions. The corresponding Hamiltonian variational ansatz32 constructed from Heff is This approach reduces computational complexity while preserving both quantitative accuracy and qualitative topological features. Unlike models that target topologically trivial phases, in which Hubbard-like on-site interaction terms are usually sufficient to describe electron-electron interactions, our method retains long-range interactions crucial for nontrivial topological order, improving both expressiveness and physical fidelity. An additional advantage of this approach lies in its preservation of Hamiltonian symmetries. By construction, the symmetry constraints ensure that the final state ∣ψ({βj})⟩eff transforms under the same symmetry operations by H as the initial state, regardless of variational parameters {βj}. This property enables the ansatz to target ground states associated with specific quantum numbers, determined by the initial state Ψ0. In addition, such symmetry requirement confines the optimization to the physically relevant subspace, reducing classical search complexity while enabling symmetry-verification error mitigation on quantum hardware37. Variational optimization procedure The HVA associated with Heff is given by where the CDW state ΨCDW=100100....1001 serves as the initial state, prepared by applying X gates on every three qubits of the trivial product state 0⊗N. The variational optimization problem is formulated as where H denotes the parent Hamiltonian for the ν = 1/3 Laughlin state in Eq. (1). Optimization of βkm was performed via classical simulation (noiseless). Specifically, for a fixed system size N, we optimize the expectation value of H at filling factor ν = 1/3 in the isotropic geometry regime, setting the circumference Ly = 10, where the system’s ground state is the Laughlin state. We used the pennylane.lightning package to perform a noiseless simulation of the ansatz circuit and output the exact quantum state vector and the numpy package to compute the expectation value of H. We use the L-BFGS-B algorithm for optimization, as implemented in the SciPy package65,66, combined with basinhopping to mitigate the risk of converging to local minima. The basinhopping routine was performed with 102 hopping attempts, and each local optimization was allowed a maximum of 103 iterations. To further enhance robustness, we initialized the optimization from 50 independent random initial parameter sets. Convergence was declared when the relative change in the cost function, 〈H〉, was less than 10−6 between successive iterations. The optimized variational parameters used throughout this work are summarized in Table 1. Table 1Optimized parameters for the ν = 1/3 Laughlin state at Ly = 10 with system size Ne = 6β21β30β31β10β2011.75112.57312.2194.73210.972 Optimized parameters for the ν = 1/3 Laughlin state at Ly = 10 with system size Ne = 6 Gate decomposition for scattering layer U^km(m≠0) Implementing the scattering layer U^km(m≠0) on a quantum processor requires efficient decomposition into native gate operations. In this work we adopt the first-order Suzuki-Trotter method to implement all the unitaries U^km. After Jordan-Wigner transformation, the exponent in for a specific j will yield 8 Pauli terms where we have omitted the qubit index for conciseness. Reordering these terms strategically can significantly reduce the circuit depth by minimizing basis changes between successive Trotter steps. We rearrange them as follows This optimized sequencing leads to a substantial constant factor reduction in CNOT gate overhead, decreasing the count from 48 to 17 per site index j. We used qiskit for circuit compilation. Statistical inference and error propagation For each circumference Ly, the second Rényi entropy estimator SA(2)(Ly) was obtained from randomized measurements using an ensemble of NU = 200 random unitaries and NM = 300 shots per unitary. To reduce partition-dependent finite-size oscillations and improve statistical efficiency, we evaluated three different subsystem partitions of size NA = 6 and pooled their primitive purity estimators prior to the logarithm. Denoting by Xm,u(Ly) the primitive estimator for cut m ∈ {1, 2, 3} and unitary u, we form We report the bias-corrected entropy estimator where the second term is a second-order delta-method correction for the nonlinear −ln(⋅) transformation and Var¯(P^(Ly))=sY2(Ly)/NU with sY2(Ly)=1NU−1∑uYu(Ly)−P^(Ly)2. Pointwise uncertainty at fixed Ly was quantified by a non-parametric bootstrap over the unitary ensemble (104 replicates). In each replicate we resampled the NU unitaries with replacement and recomputed S^A(2),*(Ly) using the same pooled-purity and bias-correction procedure (with the same resampled unitary indices applied to all three partitions to preserve their correlations). We plot the means of the resulting bootstrap distribution, with error bars defined by the 16th and 84th percentiles. To propagate uncertainty to the linear-fit parameters in SA(2)(Ly)=αLy−γtopo, we performed a refit bootstrap (104 replicates). For each replicate, we generated {S^A(2),*(Ly)}Ly as above and fit by weighted least squares with fixed weights wi = 1/σi, where σi is the standard deviation of the pointwise bootstrap distribution at Ly,i. The reported α and −γtopo are the means of the resulting parameter distributions, with uncertainties obtained from the 16th and 84th percentiles (symmetrized for compact reporting). Quantum hardware The quantum circuits for measuring local density and spatial correlations were executed on IonQ’s Aria 1 trapped-ion quantum computer, which utilizes 25 ytterbium-ion-based qubits with all-to-all connectivity. The hardware is calibrated daily and here we report Aria 1’s calibrations on the day of execution accessed through Amazon Braket. Single-qubit gates were characterized using Clifford randomized benchmarking, achieving an average fidelity of 99.97%. Two-qubit gates were benchmarked using direct randomized benchmarking on the XX(π/4) gate, yielding an average fidelity of 98.46%. Readout fidelity was evaluated through one-qubit randomized benchmarking, with an average fidelity of 99.44%. To mitigate hardware noise, we employed IonQ’s native debiasing mitigation scheme. The quantum circuits for measuring second-order Rényi entropy via randomized measurement were executed on IonQ’s Forte 1 trapped-ion quantum computer, which utilizes 36 ytterbium-ion-based qubits with all-to-all connectivity. Here we report Forte 1’s characterization on the day of execution accessed through Amazon Braket. Single-qubit gates were characterized using Clifford randomized benchmarking, achieving an average fidelity of 99.98%. Two-qubit gates were benchmarked using direct randomized benchmarking67, yielding an average fidelity of 99.68%. State preparation and measurement was evaluated through one-qubit randomized benchmarking, with an average fidelity of 99.68%. Supplementary information Supplementary Information Transparent Peer Review file Acknowledgements We thank Pavel Lougovski, Xiaodong Hu, and Xiaodong Xu for insightful discussions. L.S. and T.C. are supported by the U.S. Department of Energy, Office of Basic Energy Sciences, under Contract No. DE-SC0025327 on the computations and simulations of the physical behavior of electrons and topology. L.S. and D.X. are supported by the U.S. Department of Energy, Office of Science, National Quantum Information Science Research Centers, Co-design Center for Quantum Advantage (C2QA), under Contract No. DE-SC0012704 for the theoretical analysis for quantum computing. The authors acknowledge the support of Amazon Web Services (AWS) credit and quantum computing resources for this work. This research used resources of the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 using NERSC award BES-ERCAP0032546, BES-ERCAP0033507, and DDR-ERCAP0034430. Author contributions L.S., D.X. and T.C. developed the theory. L.S. wrote the code. L.S. ran experiments. M.L. and C.Y.-Y.L. facilitated quantum processor access and advised on the experimental execution. All authors contributed to scientific discussion and writing the paper. Peer review Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available. Data availability The data that support the findings of this study are available at 10.6084/m9.figshare.31352047. Code availability The executable quantum circuits used in this study are available at 10.6084/m9.figshare.31352047. Competing interests The authors declare no competing interests. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Contributor Information Di Xiao, Email: dixiao@uw.edu. Ting Cao, Email: tingcao@uw.edu. Supplementary information The online version contains supplementary material available at 10.1038/s41467-026-72769-y. References Associated Data Supplementary Materials Supplementary Information Transparent Peer Review file Data Availability Statement The data that support the findings of this study are available at 10.6084/m9.figshare.31352047. The executable quantum circuits used in this study are available at 10.6084/m9.figshare.31352047.