Regenerative Potential of Exosomes from 3D Spheroid-Cultured Stem Cells Compared with 2D Culture in Dentin–Pulp Regeneration: A Systematic Review Authors: Hesti Witasari Jos Erry, Anggraini Margono, Dini Asrianti Bagio, Dewi Fatma Suniarti, Indra Kusuma, Hendrik Setia Budi, Rachmat Mauludin, Rahmi Syaflida Dalimunthe, Dodi Valentino Tambun, Lisa Rinanda Amir Published: 2026 ABSTRACT PurposeThis systematic review aimed to evaluate the current preclinical evidence on exosomes derived from three-dimensional stem cell culture systems and their direct or indirect relevance to dentin–pulp regeneration. Exosomes derived from stem cells have emerged as promising mediators of tissue regeneration because of their ability to transfer bioactive molecules that regulate cellular communication and tissue repair. Recent studies suggest that exosomes obtained from three-dimensional (3D) spheroid cultures may exhibit enhanced regenerative properties compared with those derived from conventional two-dimensional cultures.MethodsA systematic review was conducted following the PRISMA 2020 guidelines. Electronic searches were performed in PubMed, Scopus, and ProQuest databases to identify relevant studies investigating exosomes derived from 3D cell culture systems with potential relevance to dentin–pulp regeneration. Studies were screened according to predefined inclusion and exclusion criteria. Data extraction focused on cell sources, exosome isolation methods, characterization techniques, and biological effects related to dental pulp regeneration.ResultsTen studies met the inclusion criteria. The included studies demonstrated that exosomes derived from 3D spheroid cultures may enhance angiogenesis, support odontogenic differentiation, reduce inflammatory responses, and promote regenerative tissue repair. Several studies also reported increased expression of regenerative markers and improved cellular proliferation when compared with exosomes derived from conventional two-dimensional cultures. However, only a limited number of studies directly investigated dentin–pulp-related outcomes, while several provided indirect mechanistic evidence from non-dental preclinical models.ConclusionExosomes derived from three-dimensional culture systems show promising potential as a cell-free therapeutic strategy for dentin–pulp regeneration. These vesicles may improve tissue repair through enhanced biological activity. However, the current evidence remains mainly preclinical, heterogeneous, and partly indirect. Further standardized experimental studies and clinical investigations are required to validate their translational application in regenerative endodontic therapy. Introduction Regenerative endodontics has emerged as a promising therapeutic strategy aimed at restoring the biological function of the dentin–pulp complex rather than merely replacing diseased or damaged tissue with synthetic filling materials that do not fully restore the physiological vitality of the pulp tissue. Conventional endodontic treatment, including root canal therapy, is effective in eliminating infection and relieving symptoms, but it does not re-establish the physiological vitality, sensory function, or reparative capacity of the dental pulp.1 Regenerative endodontics is based on the triad of tissue engineering, which includes stem cells, scaffolds, and bioactive signaling molecules that collectively promote pulp tissue regeneration and revascularization.2 Stem cell–based approaches have been extensively investigated in regenerative dentistry because of their potential to promote angiogenesis, modulate inflammation, and induce differentiation into odontoblast-like cells.2 However, direct stem cell transplantation remains associated with several challenges, including limited cell survival, possible immune reactions, ethical concerns, and regulatory barriers that may hinder translation into routine clinical practice.3,4 These limitations have stimulated growing interest in cell-free therapeutic strategies. Among these, exosomes have gained considerable attention as biologically active extracellular vesicles capable of mediating intercellular communication. Exosomes are nanosized membrane-bound vesicles that carry proteins, lipids, messenger RNAs, and microRNAs, thereby regulating multiple processes involved in tissue repair and regeneration.5,6 According to the Minimal Information for Studies of Extracellular Vesicles (MISEV2018) guidelines, exosomes are generally characterized based on their size, morphology, and the expression of markers such as CD63, CD81, and CD9.7 Extracellular vesicles (EVs) are broadly classified into exosomes, microvesicles, and apoptotic bodies based on their size and biogenesis. Compared with other EVs, exosomes exhibit a more homogeneous size distribution and more stable bioactive cargo, making them particularly attractive for regenerative applications.3 In the context of regenerative dentistry, exosomes derived from mesenchymal stem cells, particularly dental pulp stem cells, have demonstrated the ability to enhance angiogenesis, reduce inflammation, and promote odontogenic differentiation.8,9 Most studies investigating regenerative exosomes have traditionally used two-dimensional (2D) culture systems. However, 2D culture conditions fail to recapitulate the complex three-dimensional (3D) microenvironment found in living tissues, which may influence cell behavior, signaling pathways, and secreted vesicle composition.10 In contrast, 3D culture systems such as spheroids, scaffold-based cultures, and hollow-fiber bioreactors may better reproduce certain aspects of the in vivo cellular niche by promoting cell–cell and cell–matrix interactions, extracellular matrix deposition, and physiologically relevant gradients.11–13 Emerging evidence suggests that exosomes derived from 3D culture systems may possess distinct molecular cargo and potentially enhanced regenerative bioactivity compared with exosomes derived from conventional 2D cultures.14–17 Despite these promising findings, the role of 3D culture–derived exosomes in dentin–pulp regeneration has not yet been systematically synthesized. Therefore, this systematic review aimed to evaluate the current evidence regarding exosomes derived from three-dimensional culture systems in the context of dentin–pulp regeneration. This review specifically examined whether exosomes derived from 3D stem cell culture systems demonstrate regenerative effects relevant to dentin–pulp regeneration and how these effects compare with those of conventional 2D culture-derived exosomes. Both direct dentin–pulp-related studies and indirect mechanistic preclinical studies relevant to regenerative processes were considered in this review to provide a broader understanding of the biological effects of 3D culture-derived exosomes. Furthermore, this review aimed to highlight translational implications, current limitations, and future research directions for exosome-based approaches in regenerative endodontics. Materials and Methods Study Design This study was conducted as a systematic review in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines.18 Because of the anticipated heterogeneity among included studies, a narrative synthesis approach was planned. The review protocol was prospectively registered in the Open Science Framework (OSF; DOI: 10.17605/OSF.IO/4EKXC). The review design followed a structured process consisting of literature search, study selection, data extraction, quality appraisal, and narrative synthesis. Search Strategy A comprehensive electronic search strategy was developed to identify studies investigating exosomes derived from three-dimensional culture systems and their potential direct or indirect relevance to dentin–pulp regeneration. The databases PubMed, Scopus, and ProQuest were systematically searched for articles published between January 2015 and April 2025. No language restrictions were applied during the initial search, although only studies published in English were included in the final review. The search strategy combined controlled vocabulary and free-text terms related to exosomes, extracellular vesicles, and three-dimensional culture systems. Search terms included “exosome”, “extracellular vesicle”, “EV”, “3D culture”, “three-dimensional”, “spheroid”, “scaffold”, “organoid”, and “aggregate culture”, combined with dentin–pulp-related terms including “dental pulp”, “dentin”, “dentin-pulp complex”, “odontogenesis”, “endodontic regeneration”, and “tooth regeneration”. Boolean operators (AND, OR) were used to optimize sensitivity and specificity. The detailed search strategy for each database is presented in Table 1.Table 1Databases and Search Strategies Used in the Systematic ReviewDatabaseSearch StrategyProQuestNOFT(exosome OR “extracellular vesicle” OR EV) AND NOFT(“3D culture” OR “three-dimensional” OR spheroid OR organoid OR “aggregate culture”) AND NOFT(“dental pulp” OR dentin OR “dentin-pulp complex” OR odontogenesis OR “endodontic regeneration” OR “tooth regeneration”)PubMed(exosome*[tiab] OR “Extracellular Vesicles”[tiab]) AND (spheroid*[tiab] OR “3D culture”[tiab] OR “three dimensional”[tiab] OR organoid*[tiab] OR “aggregate culture”[tiab]) AND (“dental pulp”[tiab] OR dentin[tiab] OR “dentin-pulp complex”[tiab] OR odontogen*[tiab] OR “endodontic regeneration”[tiab] OR “tooth regeneration”[tiab])ScopusTITLE-ABS-KEY (“exosome” OR “extracellular vesicle” OR EV) AND TITLE-ABS-KEY (“3D culture” OR “three-dimensional” OR “spheroid” OR “organoid” OR “aggregate culture”) AND TITLE-ABS-KEY (“dental pulp” OR dentin OR “dentin-pulp complex” OR odontogen OR “endodontic regeneration” OR “tooth regeneration”) Table 1Databases and Search Strategies Used in the Systematic ReviewDatabaseSearch StrategyProQuestNOFT(exosome OR “extracellular vesicle” OR EV) AND NOFT(“3D culture” OR “three-dimensional” OR spheroid OR organoid OR “aggregate culture”) AND NOFT(“dental pulp” OR dentin OR “dentin-pulp complex” OR odontogenesis OR “endodontic regeneration” OR “tooth regeneration”)PubMed(exosome*[tiab] OR “Extracellular Vesicles”[tiab]) AND (spheroid*[tiab] OR “3D culture”[tiab] OR “three dimensional”[tiab] OR organoid*[tiab] OR “aggregate culture”[tiab]) AND (“dental pulp”[tiab] OR dentin[tiab] OR “dentin-pulp complex”[tiab] OR odontogen*[tiab] OR “endodontic regeneration”[tiab] OR “tooth regeneration”[tiab])ScopusTITLE-ABS-KEY (“exosome” OR “extracellular vesicle” OR EV) AND TITLE-ABS-KEY (“3D culture” OR “three-dimensional” OR “spheroid” OR “organoid” OR “aggregate culture”) AND TITLE-ABS-KEY (“dental pulp” OR dentin OR “dentin-pulp complex” OR odontogen OR “endodontic regeneration” OR “tooth regeneration”) Databases and Search Strategies Used in the Systematic Review Eligibility Criteria Studies were selected according to predefined inclusion and exclusion criteria based on the PICOS framework (Population, Intervention, Comparator, Outcomes, and Study design). The comparator of interest included conventional two-dimensional (2D) culture-derived exosomes when available. Studies were included if they: Investigated exosomes or extracellular vesicles derived from 3D culture systemsInvolved cell sources relevant to regenerative applications, including mesenchymal stem cells or dental-derived stem cellsEvaluated biological outcomes relevant to dentin–pulp regeneration, such as angiogenesis, odontogenic differentiation, anti-inflammatory effects, pulp vitality, or tissue repair. Studies reporting indirect mechanistic evidence relevant to regenerative processes, including angiogenesis, anti-inflammatory activity, or mineralization-related pathways, were also considered when direct dentin–pulp outcomes were limited.Used in vitro, in vivo, or preclinical experimental designsWere published in English Investigated exosomes or extracellular vesicles derived from 3D culture systems Investigated exosomes or extracellular vesicles derived from 3D culture systems Involved cell sources relevant to regenerative applications, including mesenchymal stem cells or dental-derived stem cells Involved cell sources relevant to regenerative applications, including mesenchymal stem cells or dental-derived stem cells Evaluated biological outcomes relevant to dentin–pulp regeneration, such as angiogenesis, odontogenic differentiation, anti-inflammatory effects, pulp vitality, or tissue repair. Studies reporting indirect mechanistic evidence relevant to regenerative processes, including angiogenesis, anti-inflammatory activity, or mineralization-related pathways, were also considered when direct dentin–pulp outcomes were limited. Evaluated biological outcomes relevant to dentin–pulp regeneration, such as angiogenesis, odontogenic differentiation, anti-inflammatory effects, pulp vitality, or tissue repair. Studies reporting indirect mechanistic evidence relevant to regenerative processes, including angiogenesis, anti-inflammatory activity, or mineralization-related pathways, were also considered when direct dentin–pulp outcomes were limited. Used in vitro, in vivo, or preclinical experimental designs Used in vitro, in vivo, or preclinical experimental designs Were published in English Were published in English Studies were excluded if they: Did not involve exosome isolation or characterizationDid not use a 3D culture systemDid not report regenerative or biologically relevant outcomesWere conference abstracts, editorials, reviews, or duplicate publications Did not involve exosome isolation or characterization Did not involve exosome isolation or characterization Did not use a 3D culture system Did not use a 3D culture system Did not report regenerative or biologically relevant outcomes Did not report regenerative or biologically relevant outcomes Were conference abstracts, editorials, reviews, or duplicate publications Were conference abstracts, editorials, reviews, or duplicate publications Study Selection The search results were exported into Rayyan for screening and duplicate removal.19 After duplicate removal, titles and abstracts were independently screened for relevance by reviewers using the predefined eligibility criteria. Potentially eligible studies underwent full-text assessment. Any disagreements during the screening process were resolved through discussion until consensus was achieved. Search Outcome The initial search across PubMed, Scopus, and ProQuest identified 882 records. After removal of 62 duplicates, 820 unique records remained for title and abstract screening. Of these, 65 records were selected for full-text assessment. Following full-text review, 55 articles were excluded because they did not meet the inclusion criteria, primarily due to the absence of 3D culture methodology, lack of exosome isolation, or outcomes unrelated to dentin–pulp regeneration. Ultimately, 10 studies were included in the final qualitative synthesis. The study selection process is shown in Figure 1. Figure 1PRISMA 2020 flow diagram illustrating identification, screening, eligibility assessment, and inclusion of studies in this systematic review.The flowchart details the process of identifying studies via databases and registers. It begins with the identification phase, where 882 records are identified from databases. Before screening, 62 duplicate records are removed. The screening phase follows, with 820 records screened and 755 records excluded. Reports sought for retrieval number 65, with none unretrieved. In the eligibility assessment, 65 reports are assessed and exclusions are made due to Exo-2D culture (18), unsuitable population (32) and unsuitable study design (5). Finally, 10 studies are included in the review.A flowchart illustrating study identification, screening, eligibility and inclusion in a systematic review. PRISMA 2020 flow diagram illustrating identification, screening, eligibility assessment, and inclusion of studies in this systematic review. Data Extraction Data extraction was conducted independently by two reviewers using a standardized form. The following variables were extracted from each included study: author and year of publication, cell source, study design, 3D culture method, exosome isolation method, characterization techniques, biological outcomes, and conclusions relevant to dentin–pulp regeneration. When discrepancies occurred, the full texts were re-examined and resolved by discussion until agreement was reached. Quality Assessment The methodological quality of the included studies was assessed to determine the reliability of the available evidence. For in vivo studies, SYRCLE’s risk of bias tool was applied.20 This tool evaluates domains such as sequence generation, baseline characteristics, allocation concealment, random housing, blinding, incomplete outcome data, selective outcome reporting, and other sources of bias. For in vitro studies, a modified SYRCLE-based framework was used, focusing on domains relevant to laboratory-based experimental designs, including clarity of study objectives, randomization of experimental groups, blinding, outcome assessment, and selective reporting.21 Each domain was rated as “Yes” for low risk of bias, “No” for high risk of bias, or “Unclear” where reporting was insufficient. Data Synthesis Because of the heterogeneity across studies in terms of cell sources, 3D culture platforms, exosome isolation methods, and reported outcomes, a meta-analysis was not considered appropriate. Therefore, a narrative synthesis was performed following the principles of the Synthesis Without Meta-analysis (SWiM) reporting guideline where applicable. The synthesis primarily applied structured thematic narrative interpretation and direction-of-effect assessment to summarize heterogeneous regenerative outcomes across the included studies.22 The findings were organized into structured tables summarizing study characteristics and biological outcomes. Results were synthesized thematically according to key regenerative processes including angiogenesis, odontogenesis, pulp vitality, and anti-inflammatory activity. Risk of bias findings were integrated into the interpretation of the evidence. Results Study Characteristics A total of 10 studies met the eligibility criteria and were included in this review. The included studies were published between 2018 and 2025 and comprised in vitro, in vivo, and combined preclinical designs. Cell sources investigated included dental pulp stem cells, bone marrow mesenchymal stem cells, umbilical cord mesenchymal stem cells, human embryonic stem cells, and other mesenchymal stem cell populations. Various 3D culture approaches were used across the included studies, including spheroid formation, scaffold-based culture systems, hypoxia-preconditioned spheroids, 3D aggregates, and hollow-fiber bioreactors. Exosomes were isolated primarily using ultracentrifugation or tangential flow filtration and were commonly characterized using transmission electron microscopy, nanoparticle tracking analysis, and Western blotting. A detailed summary of the methodological characteristics of the included studies is presented in Table 2.Table 2Characteristics of Included Studies Investigating 3D-Culture-Derived Exosomes for Dentin–Pulp RegenerationAuthor/YearCell SourceStudy Type3D Culture MethodExosome IsolationCharacterizationFaruqu et al (2021)UC-MSCIn vitroSerum-free spheroidUltracentrifugationTEM, NTA, WBGao et al (2021)BMSCIn vitro + in vivo3D spheroidUltracentrifugationTEM, NTA, WBHaraszti et al (2018)MSCIn vitro3D bioreactor + TFFTangential Flow FiltrationTEM, NTA, WBChen et al (2025)BMSCIn vitro + in vivo3D cultivation + enrichment (HGF)TFFTEM, NTA, WBToghiani et al (2024)WJ-MSCIn vitro + in vivoHypoxia-preconditioned spheroidUltracentrifugationTEM, NTA, WBYan et al (2023)UC-MSCIn vitro + in vivo3D porous scaffoldTFFTEM, NTA, WBGuo et al (2022)SHED aggregates / DPSCsIn vitro + in vivo3D aggregatesUltracentrifugationTEM, NTA, WB, qPCRYan and Wu (2020)UC-MSCIn vitro + in vivoHollow-fiber bioreactorBioreactor + TFFTEM, NTA, WBWang et al (2021)hESCIn vitro + in vivo3D spheroidUltracentrifugationTEM, NTA, WB, miRNAXu et al (2022)hUC-MSCIn vitro + in vivo3D spheroidUltracentrifugationTEM, NTA, WB, miRNA Table 2Characteristics of Included Studies Investigating 3D-Culture-Derived Exosomes for Dentin–Pulp RegenerationAuthor/YearCell SourceStudy Type3D Culture MethodExosome IsolationCharacterizationFaruqu et al (2021)UC-MSCIn vitroSerum-free spheroidUltracentrifugationTEM, NTA, WBGao et al (2021)BMSCIn vitro + in vivo3D spheroidUltracentrifugationTEM, NTA, WBHaraszti et al (2018)MSCIn vitro3D bioreactor + TFFTangential Flow FiltrationTEM, NTA, WBChen et al (2025)BMSCIn vitro + in vivo3D cultivation + enrichment (HGF)TFFTEM, NTA, WBToghiani et al (2024)WJ-MSCIn vitro + in vivoHypoxia-preconditioned spheroidUltracentrifugationTEM, NTA, WBYan et al (2023)UC-MSCIn vitro + in vivo3D porous scaffoldTFFTEM, NTA, WBGuo et al (2022)SHED aggregates / DPSCsIn vitro + in vivo3D aggregatesUltracentrifugationTEM, NTA, WB, qPCRYan and Wu (2020)UC-MSCIn vitro + in vivoHollow-fiber bioreactorBioreactor + TFFTEM, NTA, WBWang et al (2021)hESCIn vitro + in vivo3D spheroidUltracentrifugationTEM, NTA, WB, miRNAXu et al (2022)hUC-MSCIn vitro + in vivo3D spheroidUltracentrifugationTEM, NTA, WB, miRNA Characteristics of Included Studies Investigating 3D-Culture-Derived Exosomes for Dentin–Pulp Regeneration This table summarizes the methodological aspects of the ten included studies, including cell sources, study type, 3D culture platforms, isolation methods, and characterization techniques used for exosome analysis. The proposed relationship between 3D spheroid formation, exosome secretion, and the biological effects relevant to dentin–pulp regeneration is illustrated in Figure 2. Figure 2Schematic drawing of exosome production in three-dimensional (3D) and two-dimensional (2D) stem cell culture systems. The upper panel shows 3D culture using ultra-low attachment flasks and alternative techniques, including Matrigel, scaffold, and bioreactor systems, leading to spheroid formation and potentially enhanced exosome bioactivity. The lower panel illustrates conventional 2D monolayer culture, resulting in exosomes with comparatively lower reported regenerative activity. Differences in composition and biological effects on dentin–pulp regeneration are highlighted. The schematic drawing was generated with the assistance of ChatGPT (OpenAI).The schematic compares exosome production in 3D and 2D stem cell cultures. In 3D culture, hDPSCs/MSCs are seeded in ultra-low attachment flasks, forming spheroids. This enhances cell interaction and exosome bioactivity, aiding dentin-pulp regeneration through angiogenesis, odontogenic differentiation and anti-inflammatory effects. Alternative 3D systems include Matrigel, bioreactors and scaffolds. In 2D culture, cells form a monolayer on plates, producing exosomes with proteins, lipids, mRNAs and microRNAs, but with less regenerative potential and reduced angiogenic, odontogenic and anti-inflammatory effects.A schematic of 3D and 2D stem cell culture procedures for exosome production and dentin-pulp regeneration effects. Schematic drawing of exosome production in three-dimensional (3D) and two-dimensional (2D) stem cell culture systems. The upper panel shows 3D culture using ultra-low attachment flasks and alternative techniques, including Matrigel, scaffold, and bioreactor systems, leading to spheroid formation and potentially enhanced exosome bioactivity. The lower panel illustrates conventional 2D monolayer culture, resulting in exosomes with comparatively lower reported regenerative activity. Differences in composition and biological effects on dentin–pulp regeneration are highlighted. The schematic drawing was generated with the assistance of ChatGPT (OpenAI). Biological Outcomes and Relevance to Dentin–Pulp Regeneration The included studies generally suggested that exosomes derived from 3D culture systems may exhibit enhanced regenerative potential compared with exosomes derived from conventional 2D cultures. The reported biological outcomes included angiogenesis, odontogenic differentiation, anti-inflammatory effects, and tissue repair. Several studies demonstrated that 3D-derived exosomes promoted angiogenesis by enhancing endothelial proliferation, migration, and vascularization, in some cases through HMGB1/AKT signaling pathways.10,11,23 Other studies reported that exosomes from 3D spheroids and related systems enhanced odontogenic differentiation and dentin-associated regeneration, either directly in dental pulp-related cells or indirectly through mechanistic pathways relevant to mineralized tissue formation.4,10,11,24 Anti-inflammatory activity was also reported in studies using hypoxia-conditioned spheroids and enriched exosome preparations, suggesting that 3D-derived exosomes may support regenerative healing by modulating inflammatory responses.22,25–27 In addition, several studies supported the potential translational relevance of 3D culture systems by demonstrating improved exosome yield, bioactivity, and scalability, particularly in bioreactor-based production platforms.6,28 The main biological findings and their relevance to dentin–pulp regeneration are summarized in Table 3.Table 3Biological Outcomes and Relevance of Included StudiesAuthor/YearBiological OutcomesKey FindingsRelevance to Pulp–Dentin RegenerationFaruqu et al (2021)Fibroblast proliferation, migrationExosomes enhanced fibroblast activitySupportive via stromal activationGao et al (2021)Angiogenesis (HMGB1/AKT pathway)Increased endothelial proliferation and migrationIndirect relevance via angiogenesisHaraszti et al (2018)Yield and potency3D-TFF exosomes showed higher yield and bioactivityMethodological support for scalable productionChen et al (2025)Barrier protection, anti-inflammationHGF-enriched exosomes protected lung epitheliumIndirect mechanistic relevanceToghiani et al (2024)Renal restoration, angiogenesisHypoxia-3D exosomes promoted renal cell survivalSupportive mechanistic evidenceYan et al (2023)Osteochondral repairEnhanced osteochondral regeneration in vivoIndirect pulp-dentin relevanceGuo et al (2022)Osteogenesis in DPSCsExosome-shuttled TFAM mRNA enhanced osteogenic differentiationDirectly relevant to pulp–dentin regenerationYan and Wu (2020)Osteochondral regenerationHollow-fiber 3D exosomes improved repairIndirect regenerative relevanceWang et al (2021)Anti-fibrosis (TGFβRII-SMADs)hESC exosomes attenuated liver fibrosisIndirect mechanistic evidenceXu et al (2022)Anti-fibroblast activationlet-7i-5p exosomes suppressed TGFBR1 signalingSupportive mechanistic pathway Table 3Biological Outcomes and Relevance of Included StudiesAuthor/YearBiological OutcomesKey FindingsRelevance to Pulp–Dentin RegenerationFaruqu et al (2021)Fibroblast proliferation, migrationExosomes enhanced fibroblast activitySupportive via stromal activationGao et al (2021)Angiogenesis (HMGB1/AKT pathway)Increased endothelial proliferation and migrationIndirect relevance via angiogenesisHaraszti et al (2018)Yield and potency3D-TFF exosomes showed higher yield and bioactivityMethodological support for scalable productionChen et al (2025)Barrier protection, anti-inflammationHGF-enriched exosomes protected lung epitheliumIndirect mechanistic relevanceToghiani et al (2024)Renal restoration, angiogenesisHypoxia-3D exosomes promoted renal cell survivalSupportive mechanistic evidenceYan et al (2023)Osteochondral repairEnhanced osteochondral regeneration in vivoIndirect pulp-dentin relevanceGuo et al (2022)Osteogenesis in DPSCsExosome-shuttled TFAM mRNA enhanced osteogenic differentiationDirectly relevant to pulp–dentin regenerationYan and Wu (2020)Osteochondral regenerationHollow-fiber 3D exosomes improved repairIndirect regenerative relevanceWang et al (2021)Anti-fibrosis (TGFβRII-SMADs)hESC exosomes attenuated liver fibrosisIndirect mechanistic evidenceXu et al (2022)Anti-fibroblast activationlet-7i-5p exosomes suppressed TGFBR1 signalingSupportive mechanistic pathway Biological Outcomes and Relevance of Included Studies The main biological findings and their relevance to dentin–pulp regeneration are summarized in Table 3. Overall, the included studies demonstrated enhanced angiogenic, osteogenic, anti-inflammatory, anti-fibrotic, and regenerative-supportive effects of exosomes derived from 3D culture systems, although several studies provided indirect mechanistic or translational evidence rather than direct dentin–pulp outcomes. Risk of Bias The overall methodological quality of the included studies was considered acceptable, although several domains showed moderate risk of bias. For in vitro studies, most investigations clearly reported their objectives, exosome isolation and characterization methods, and measured outcomes. However, randomization, allocation concealment, and blinding were frequently rated as unclear or high risk due to insufficient reporting. For in vivo studies, methodological rigor was also moderate overall. While several studies adequately described baseline comparability and outcome assessment, many lacked clear descriptions of randomization, allocation concealment, and blinding procedures. Selective reporting was generally judged to be at low risk across most studies. The detailed risk of bias assessments are presented in Tables 4 and 5, and the visual summary is shown in Figure 3.Table 4Risk of Bias for in vitro Studies (Modified SYRCLE’s RoB Tool)StudyItem 1Item 2Item 3Item 4Item 5Item 6Item 7Item 8Item 9Item 10Faruqu et al (2021)NoYesYesYesYesYesNoNoYesYesGao et al (2021)NoYesYesNoYesYesNoNoUnclearYesHaraszti et al (2018)NoYesYesYesYesYesNoUnclearUnclearYesChen et al (2025)NoYesYesYesYesYesNoYesYesYesToghiani et al (2024)NoYesYesYesYesYesNoYesUnclearYesYan et al (2023)NoYesYesYesYesYesNoYesYesYesGuo et al (2022)NoYesYesYesYesYesNoYesYesYesYan and Wu (2020)NoYesYesYesYesYesNoYesYesYesWang et al (2021)NoYesYesYesYesYesNoUnclearUnclearYesXu et al (2022)NoYesYesYesYesYesNoYesYesYesNotes: Items were adapted from SYRCLE’s risk of bias tool for laboratory-based studies. Item 1, randomization of experimental groups; Item 2, baseline comparability; Item 3, clarity of intervention or exposure; Item 4, standardized culture conditions; Item 5, clarity of exosome isolation and characterization; Item 6, clarity of outcome measurement; Item 7, blinding of outcome assessment; Item 8, incomplete outcome data; Item 9, selective outcome reporting; Item 10, other sources of bias. Table 5Risk of Bias for in vivo Studies (SYRCLE’s RoB Tool)StudyItem 1Item 2Item 3Item 4Item 5Item 6Item 7Item 8Item 9Item 10Gao et al (2021)YesYesNoYesUnclearYesNoUnclearUnclearYesChen et al (2025)YesNoNoYesUnclearYesNoYesYesYesToghiani et al (2024)NoUnclearNoUnclearUnclearYesNoYesYesYesYan et al (2023)YesYesYesYesNoUnclearNoYesYesYesGuo et al (2022)YesYesUnclearYesNoYesNoUnclearUnclearYesYan and Wu (2020)UnclearYesUnclearUnclearUnclearUnclearUnclearYesYesUnclearWang et al (2021)UnclearYesUnclearUnclearUnclearUnclearUnclearYesYesUnclearXu et al (2022)UnclearYesUnclearUnclearUnclearUnclearUnclearYesYesUnclearNotes: Items were based on SYRCLE’s risk of bias tool. Item 1, sequence generation; Item 2, baseline characteristics; Item 3, allocation concealment; Item 4, random housing; Item 5, blinding of caregivers and/or investigators; Item 6, random outcome assessment; Item 7, blinding of outcome assessment; Item 8, incomplete outcome data; Item 9, selective outcome reporting; Item 10, other sources of bias. Figure 3Risk of bias summary for included studies.A grouped bar graph titled Risk of bias summary for included studies. Legend lists In vitro and In vivo. X-axis label: category, unit not shown; categories: Yes left parenthesis Low risk right parenthesis, No left parenthesis High risk right parenthesis, Unclear. Y-axis label: Percentage left parenthesis percent right parenthesis; range 0 to 80 with ticks at 0, 10, 20, 30, 40, 50, 60, 70, 80. Bar values: Yes left parenthesis Low risk right parenthesis: In vitro 71 percent, In vivo 45 percent. No left parenthesis High risk right parenthesis: In vitro 23 percent, In vivo 15 percent. Unclear: In vitro 6 percent, In vivo 40 percent.A grouped bar graph showing risk of bias summary for included studies in vitro and in vivo. Table 4Risk of Bias for in vitro Studies (Modified SYRCLE’s RoB Tool)StudyItem 1Item 2Item 3Item 4Item 5Item 6Item 7Item 8Item 9Item 10Faruqu et al (2021)NoYesYesYesYesYesNoNoYesYesGao et al (2021)NoYesYesNoYesYesNoNoUnclearYesHaraszti et al (2018)NoYesYesYesYesYesNoUnclearUnclearYesChen et al (2025)NoYesYesYesYesYesNoYesYesYesToghiani et al (2024)NoYesYesYesYesYesNoYesUnclearYesYan et al (2023)NoYesYesYesYesYesNoYesYesYesGuo et al (2022)NoYesYesYesYesYesNoYesYesYesYan and Wu (2020)NoYesYesYesYesYesNoYesYesYesWang et al (2021)NoYesYesYesYesYesNoUnclearUnclearYesXu et al (2022)NoYesYesYesYesYesNoYesYesYesNotes: Items were adapted from SYRCLE’s risk of bias tool for laboratory-based studies. Item 1, randomization of experimental groups; Item 2, baseline comparability; Item 3, clarity of intervention or exposure; Item 4, standardized culture conditions; Item 5, clarity of exosome isolation and characterization; Item 6, clarity of outcome measurement; Item 7, blinding of outcome assessment; Item 8, incomplete outcome data; Item 9, selective outcome reporting; Item 10, other sources of bias. Risk of Bias for in vitro Studies (Modified SYRCLE’s RoB Tool) Notes: Items were adapted from SYRCLE’s risk of bias tool for laboratory-based studies. Item 1, randomization of experimental groups; Item 2, baseline comparability; Item 3, clarity of intervention or exposure; Item 4, standardized culture conditions; Item 5, clarity of exosome isolation and characterization; Item 6, clarity of outcome measurement; Item 7, blinding of outcome assessment; Item 8, incomplete outcome data; Item 9, selective outcome reporting; Item 10, other sources of bias. Table 5Risk of Bias for in vivo Studies (SYRCLE’s RoB Tool)StudyItem 1Item 2Item 3Item 4Item 5Item 6Item 7Item 8Item 9Item 10Gao et al (2021)YesYesNoYesUnclearYesNoUnclearUnclearYesChen et al (2025)YesNoNoYesUnclearYesNoYesYesYesToghiani et al (2024)NoUnclearNoUnclearUnclearYesNoYesYesYesYan et al (2023)YesYesYesYesNoUnclearNoYesYesYesGuo et al (2022)YesYesUnclearYesNoYesNoUnclearUnclearYesYan and Wu (2020)UnclearYesUnclearUnclearUnclearUnclearUnclearYesYesUnclearWang et al (2021)UnclearYesUnclearUnclearUnclearUnclearUnclearYesYesUnclearXu et al (2022)UnclearYesUnclearUnclearUnclearUnclearUnclearYesYesUnclearNotes: Items were based on SYRCLE’s risk of bias tool. Item 1, sequence generation; Item 2, baseline characteristics; Item 3, allocation concealment; Item 4, random housing; Item 5, blinding of caregivers and/or investigators; Item 6, random outcome assessment; Item 7, blinding of outcome assessment; Item 8, incomplete outcome data; Item 9, selective outcome reporting; Item 10, other sources of bias. Risk of Bias for in vivo Studies (SYRCLE’s RoB Tool) Notes: Items were based on SYRCLE’s risk of bias tool. Item 1, sequence generation; Item 2, baseline characteristics; Item 3, allocation concealment; Item 4, random housing; Item 5, blinding of caregivers and/or investigators; Item 6, random outcome assessment; Item 7, blinding of outcome assessment; Item 8, incomplete outcome data; Item 9, selective outcome reporting; Item 10, other sources of bias. Risk of bias summary for included studies. For the in vivo studies (Table 5), the risk of bias was generally moderate. While several studies reported baseline comparability and outcome assessment adequately, many domains such as allocation concealment, randomization, and blinding were marked as Unclear or No. This highlights the challenges of methodological rigor in preclinical animal studies. Nevertheless, selective outcome reporting was judged as low risk across nearly all studies, supporting the reliability of the reported findings. Discussion This systematic review highlights the emerging potential of exosomes derived from three-dimensional culture systems as a cell-free regenerative strategy for dentin–pulp regeneration. Across the included studies, 3D culture–derived exosomes generally demonstrated potentially enhanced biological effects compared with exosomes derived from conventional 2D cultures, particularly in terms of angiogenesis, odontogenic differentiation, anti-inflammatory activity, and overall regenerative bioactivity.4,6,8,10,11,23–28 These findings are consistent with the concept that 3D cellular microenvironments more closely resemble physiological tissue conditions and consequently influence the composition and therapeutic potency of secreted exosomes.5,15–17 One of the major strengths identified across the reviewed studies was the diversity of stem cell sources used for exosome production. These included dental pulp stem cells, stem cells from exfoliated deciduous teeth, bone marrow mesenchymal stem cells, and umbilical cord-derived mesenchymal stem cells. Although all of these cell populations generated bioactive exosomes, those derived from dental or dental-related stem cells appeared to have the most direct translational relevance to regenerative endodontics.4,10,11 This is particularly important because tissue-specific stem cell sources may produce exosomes with cargo more closely aligned to the biological requirements of dentin–pulp repair. The potentially enhanced effects of 3D-derived exosomes may be attributable to the microenvironmental conditions generated in spheroids, scaffolds, and bioreactor systems. These conditions enhance cell–cell communication, extracellular matrix interactions, and the establishment of metabolic gradients that influence exosome secretion and cargo composition.5,6,15,16 Several studies suggested that 3D cultures enrich exosomes with regenerative molecules, including pro-angiogenic and pro-odontogenic microRNAs and proteins, thereby contributing to stronger therapeutic effects.8,10,11 Angiogenesis emerged as one of the most consistently reported regenerative outcomes across the included studies. This finding is particularly relevant to dentin–pulp regeneration because successful regeneration of pulp tissue requires adequate revascularization to support nutrient delivery, oxygenation, and long-term tissue viability.10,11 Exosomes derived from 3D cultures enhanced endothelial migration and proliferation, supporting the hypothesis that these vesicles may facilitate microvascular formation in regenerating pulp-like tissues.10,11,23 In addition to angiogenesis, several included studies indicated improved odontogenic or mineralization-related responses. These outcomes suggest that 3D culture–derived exosomes may contribute not only to soft tissue repair but also to dentin-associated regeneration by modulating odontogenic differentiation pathways.4,10,11,24 This dual action is of substantial interest for regenerative endodontic therapy, where coordinated vascularization and odontoblast-like differentiation are both essential. Despite these promising findings, several limitations must be considered. First, the number of included studies remains relatively small, reflecting the novelty of this field. Second, there was substantial methodological heterogeneity among studies in terms of cell sources, culture platforms, exosome isolation methods, characterization protocols, and experimental models. This heterogeneity limited direct comparison across studies and prevented quantitative meta-analysis. Third, most of the evidence originated from in vitro or preclinical animal studies, with no clinical trials available at the time of review. As a result, direct translation into clinical endodontic practice remains preliminary. Risk of bias assessment further indicated that many studies did not clearly report randomization, allocation concealment, or blinding, which may increase the possibility of overestimating positive effects.20,21 Future studies should therefore adopt more rigorous reporting standards and standardized methodologies to improve reproducibility and comparability. Standardization is especially needed in exosome isolation and characterization, consistent with broader recommendations in extracellular vesicle research. Most included studies reported core extracellular vesicle characterization methods consistent with MISEV2018 recommendations, including transmission electron microscopy, nanoparticle tracking analysis, and Western blotting, although reporting completeness varied across studies.2,12,14,20 Overall, the current evidence suggests that exosomes derived from 3D culture systems represent a promising acellular strategy for dentin–pulp regeneration. However, further well-designed preclinical studies and early-phase clinical investigations are required to confirm their safety, efficacy, and translational feasibility. Nevertheless, the certainty of the available evidence should be considered low to moderate because of methodological heterogeneity, indirect mechanistic evidence, moderate risk of bias, and the predominance of preclinical studies. Conclusion This systematic review demonstrates that exosomes derived from three-dimensional culture systems, including spheroid, scaffold-based, and bioreactor-associated platforms, show promising regenerative potential for dentin–pulp regeneration. Compared with exosomes derived from conventional 2D cultures, 3D culture–derived exosomes were associated with enhanced angiogenic and odontogenic-related responses, anti-inflammatory activity, and regenerative-supportive effects in preclinical studies. These effects support their potential as a cell-free therapeutic approach in regenerative endodontics. No included study directly evaluated clinical endodontic outcomes in human subjects. Nevertheless, the available evidence remains limited by methodological heterogeneity, moderate risk of bias, and the predominance of in vitro and preclinical models. Future research should focus on standardizing exosome production and characterization protocols, improving methodological rigor, and advancing translational studies, including clinical trials, to validate the therapeutic potential of 3D culture–derived exosomes in dental practice. Therefore, the current evidence should be interpreted cautiously because most available studies remain preclinical and methodologically heterogeneous.