Bandgap tuning through the substitution of alkali metal cations in A2AlCuF6 (A = K, Rb, and Cs) for optoelectronic and renewable energy applications Authors: Muhammad Yaqoob, Nora Mobark Farhan, Hudabia Murtaza, Quratul Ain, Rawiyah Alkahtani, Junaid Munir, M. S. Al-Buriahi Published: 2026 ABSTRACT Perovskite halides are an attractive choice for renewable energy harvesting as these materials offer high flexibility and bandgap tunability. This study interrogates the first principles analysis of A2AlCuF6 (A = K, Rb, and Cs) done via DFT simulations. The FP-LAPW approach is employed to assess the physical attributes of A2AlCuF6 (A = K, Rb, and Cs). The structural attributes reveal a significant increase in lattice constant and ground state energy as the A-site cation is replaced by K → Rb → Cs, while the reported bulk modulus reveals a declining trend. The negative formation energies and the tolerance factor values confirm thermodynamic and structural stability. The electronic bandgap reveals an increasing trend as the A-site is replaced by K → Rb → Cs, revealing indirect bandgaps of 2.80 eV, 2.78 eV and 3.10 eV for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, respectively. The optical analysis suggests that among the studied halides, Cs2AlCuF6 reports high absorption and minimum energy loss in the UV region, making it an ideal candidate for UV shields and UV photodetectors. The thermoelectric attributes reveal high ZT values at elevated temperatures, revealing that K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 are suitable contenders for the production of energy from waste heat. Introduction Energy is a crucial pillar of modern technologies, contributing significantly to socioeconomic growth by raising the standard of living.1 The growing reliance on fossil fuels has resulted in a number of environmental issues, including resource depletion and climate change.2,3 Environmental pollution and energy crises have emerged as the main obstacles to sustainable development in the context of the fast growth of global industry. In addition to having a finite supply, using traditional fossil fuels causes significant air pollution and greenhouse gas emissions.4 Clean and sustainable energy has become a global need and has encouraged significant interest in discovering advanced materials capable of supporting the next generation of renewable energy solutions.5–8 Among these, perovskite materials have gained prominence due to their remarkable versatility and wide-ranging applications, including solar cells, thermoelectric devices, and light-emitting technologies.9,10 The origin of perovskite materials can be traced back to the early 1800s, when Russian mineralogist Gustav Rose recognized a naturally occurring mineral in Russia's Ural Mountains.11 Later, perovskite halides were discovered in the early 2000s, following the discovery of organic and inorganic halide perovskites, specifically methyl ammonium lead iodide, which shows dominant efficiency in solar cell applications.12,13 Perovskite halides generally follow the general formula ABX3, where A-site and B-site represent cationic elements, and X-site is occupied by a halide.14,15 A notable variant known as double perovskite halides, represented by the formula A2BB'X6, possesses great importance for its exceptional flexibility in tuning its physical properties.16,17 Fluoride-based double perovskites, particularly those with an elpasolite-type structure, have drawn attention due to their distinctive features such as broad bandgaps, strong chemical stability, low environmental toxicity, and high dielectric constants.18 The role of fluorine is crucial in chemical modification, hybridization in nonlinear optical crystals, UV frequency conversion and many more cases.19–21 These properties make them highly suitable for use in renewable energy technologies such as clear solar cells and radiation sensing systems.22 Perovskite halides possess long charge carrier diffusion lengths, strong light absorption, and cost-effective manufacturing, leading to a significant transformation in photovoltaic technology.23,24 The ab initio study of CsGeF3 revealed that the material remains ductile till 40 GPa pressure.25 A first principle analysis of alkali-based halides Rb2ZnRuCl6 and Cs2ZnRuCl6 revealed that these halides are mechanically and dynamically stable with bandgap in the range of 1.53 eV to 1.54 eV.26 The DFT-based analysis of Cs3QR6 revealed that these halides possess bandgaps from 0.54 eV to 2.79 eV, when the HSE06 potential is employed to assess the electronic traits. Furthermore, strong polarization is seen in the visible region, highlighting that these materials are excellent contenders for photovoltaic and optoelectronic applications.27 The DFT-based analysis of K2AgSbI6 exhibits its strong optical interaction with an external electric field, revealing its potential for field-effect optical modulators and photo-detectors.28 Direct bandgaps of 1.32 eV to 1.73 eV are revealed for Sr3BiX3 (X = I, Br, and Cl), suggesting that these materials possess strong visible-light absorption and excellent thermoelectric traits.29 SCAPS-1D simulations revealed that Z2MgGeI6 (Z = Na and K) are stable and have a power conversion efficiency of 30%, highlighting their suitability for optoelectronics.30 The thermoelectric analysis of Li2ScAuZ6 (Z = I, Br, and Cl) reveals notable ZT and power factor values, which suggest that these halides are suitable for energy-harvesting technologies.31 An increase in lattice constant is noticed in K2ScInX6 as X is replaced from “F” to “I”. Furthermore, direct bandgaps are noticed for all halides, revealing high absorption in the visible region.32 The optical analysis of (Rb/Cs)2MgZn(Cl/Br)6 reports a low energy loss and strong incident light absorption in the UV range, predicting their potential for optoelectronic applications.33 The creation of sustainable and ecologically friendly materials has become a top priority as the globe moves towards renewable energy sources. Due to their decreased toxicity, enhanced environmental compatibility, and intriguing optoelectronic and energy-related features, lead-free perovskite and double-perovskite compounds have garnered a lot of attention in this area. The novelty of investigating lead-free A2AlCuF6 (A = K, Rb, and Cs) using the FP-LAPW approach in this study lies in offering the first thorough and extremely accurate explanation of their inherent characteristics without the need for pseudo-potential approximations. Within a coherent theoretical framework provided via the Wien2K code, this study offers a methodical comparison of structural stability, electronic band structure and bonding properties that are dependent on alkali metals. These findings identify A2AlCuF6 (A = K, Rb, and Cs) compounds as a unique and unexplored class of lead-free fluoride double perovskites with potential applications in optoelectronics. Computational analysis The density functional theory-based code Wein2K is used to assess the physical attributes of A2AlCuF6 (A = K, Rb, and Cs). The FP-LAPW approach, which is the most accurate methodology to assess the overall physical attributes of materials with high precision, is used to analyze the physical attributes of A2AlCuF6 (A = K, Rb, and Cs). In this technique, the spherical harmonics is used to analyze the electrons in the muffin-tin region, whereas plane waves are used to analyze the electrons in the interstitial region.34 The exchange–correlation effects in the crystal structures are treated with the TB-mBJ approximation,35 which is mathematically stated as:1 The above equation describes the expression for the modified mBJ approximation and “c” is given as:2 The alpha and beta possess numerical values of 0.012 and 1.023 Bohr1/2. The lowest energy and the equilibrium volume of the studied crystal structure are determined through the Birch–Murnaghan equation of state. Several crucial parameters for the convergence of force, charge and energy in the cycle are ensured by setting RMT × Kmax, lmax, and Gmax as 7, 12, and 14 (a.u)−1, respectively. The muffin-tin regions for K/Rb/Cs, Al, Cu and F are selected as 2.48, 2.33, 2.23, and 1.89 (a.u)−1, respectively. To avoid the overlapping spheres, the cut-off energy is selected as −8 Ryd. For the convergence of the charge and energy within the crystal structures, the convergence criteria are set to 0.0001 e (a.u)−3 and 0.1 mRy per unit cell. A dense mesh of 3000 k-points is generated in the first Brillouin zone for unit cell integrations. The crystal structure for A2AlCuF6 (A = K, Rb, and Cs) is generated via the VESTA software, and the optical properties are analyzed using the complex Kramer's equations.36 The thermoelectric properties for A2AlCuF6 (A = K, Rb, and Cs) are analyzed through the semi-classical approach embedded in the BoltzTraP code. It uses constant relaxation time approximation, which assumes that the charge carrier scattering time (τ) is constant and does not depend on energy or temperature. This simplifies transport calculations by allowing properties like electrical conductivity to be expressed as σ/τ, separating band structure effects from scattering mechanisms. Results and discussion Structural attributes Structural stability ensures that a material maintains its integrity and properties under external conditions, making it reliable for practical applications.37 The compound A2AlCuF6 (A = K, Rb, and Cs) is recognized to exhibit a cubic double perovskite structure with Fm3̄m (225) as the space group. The crystal structures for A2AlCuF6 (A = K, Rb, and Cs) are obtained via VESTA and are presented in Fig. 1(a and b). In the ball-and-stick representation, the crystal structure clearly highlights the atomic connectivity and individual bond lengths of the A–F, Al–F, and Cu–F bonds. By contrast, in the polyhedral representation, the local coordination environments are emphasized: the AlF6 and CuF6 octahedra are depicted as corner-sharing polyhedra, making the octahedral framework and the three-dimensional perovskite network more evident. The A-site of the studied halides (K, Rb, and Cs) occupies coordinates (1/4, 1/4, 3/4), Cu atom placed at the B-site is situated at (1/2, 0, 0), the Al atom situated at the B-site is located at (0, 0, 0), and the F anion is positioned at (0.22, 0, 0). The atomic bond lengths of K–F, Rb–F, Cs–F, Al–F and Cu–F are noticed as 3.11 Å, 3.37 Å, 3.54 Å, 2.00 Å and 2.46 Å, respectively. The studied structures are then relaxed through a volume optimization technique, which aids in assessing the material's ground state energies. The Birch–Murnaghan equation of state is given as:3 Crystal structure of A2AlCuF6 (A = K, Rb, and Cs) (a) ball to stick model and (b) polyhedral form and (c–e) optimization curves for A2AlCuF6 (A = K, Rb, and Cs). Fig. 1(c–e) illustrates the optimization plots for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, which revealed a significant increase in the energy and unit cell volume as the A-site is replaced with “K → Rb → Cs”. The obtained structural parameters from Birch–Murnaghan equation are listed in Table 1. The obtained lattice parameters for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 revealed a significant increase as the A-site is replaced with K → Rb → Cs. This trend is also justified by the increase in the unit cell volume of the structure obtained via volume optimization curves. The obtained bulk modulus reveals a significant decline as the A-site is replaced with K → Rb → Cs, implying stronger bonding and higher lattice rigidity for K2AlCuF6. To assess which halide is the most stable among the studied halides, the thermodynamic stability is analyzed, and for this, the formation energies of the studied halides are computed. If the material is energetically favourable with respect to its constituent elements, then its formation energy is obtained as negative; otherwise, the material is concluded to be not energetically favourable and cannot be synthesized. The formation energies for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 are computed as:4EF = ETotal − (2EK/Rb/Cs + EAl + ECu + 6EF)Here, the individual energies of K/Rb/Cs, Al, Cu and F are represented as EK/Rb/Cs, EAl, ECu and EF, respectively, while the total energy is denoted as ETotal. The obtained formation energies for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 revealed negative values, implying that these halides are energetically favourable with respect to their constituent elements and can be experimentally synthesized. To predict the structural symmetry of these studied perovskite halides, the tolerance factor is computed as:5Here, the Shannon ionic radius is used to assess the tolerance values for the studied halides. The material is predicted to be highly stable when the tolerance value is 1 and exhibit minimal to no distortions, while values below 1 or above 1 imply structural deformities. For cubic perovskite materials with minimal distortion, the tolerance factor should be 0.8 to 1.1.38 From the obtained tolerance factor values, it is seen that all the studied halides are structurally stable, and this stability increases as the A-site is incorporated with K → Rb → Cs in the studied halides. Table 1Optimized lattice parameters for A2AlCuF6 (A = K, Rb, and Cs)Structure parametersK2AlCuF6Rb2AlCuF6Cs2AlCuF6 a (Å)8.2478.4038.633 B (GPa)69.50566.08362.387 B′ (GPa)4.7334.7074.780 V 0 (a.u)3946.38011001.32591085.7051 E 0 (Ry)−7403.962296−16921.368705−36156.552417 E F (eV per atom)−3.39−3.35−3.24Tolerance factor0.961.001.06 Optimized lattice parameters for A2AlCuF6 (A = K, Rb, and Cs) Electronic properties The band structure offers direct insights into the electrical structure and functional behavior of a material. A material's appropriateness for photovoltaic devices, LEDs, photo detectors, and laser devices is determined by the size and kind of bandgap (direct vs. indirect).39 Strong optical absorption and emission are favored by direct bandgap.40 In this section, we have analyzed the electronic bandgap, TDOS and PDOS of K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 with mBJ. Fig. 2 illustrates the electronic properties of K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6. Indirect bandgaps of 2.80 eV, 2.78 eV and 3.10 eV are noticed for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, respectively, as presented in Fig. 2(a–c), revealing their semiconductor nature. While lattice expansion from K → Rb → Cs reduces orbital overlap and would normally narrow the bandgap, the Cs-based compound deviates due to strong relativistic effects. In Cs, enhanced spin–orbit coupling significantly splits the conduction and/or valence band states, effectively shifting the band edges. Additionally, the larger, more diffused Cs orbitals modify hybridization with neighboring atoms, reducing band dispersion and stabilizing certain states, leading to a reopening (increase) of the bandgap despite the increased lattice constant. The indirect nature of these bandgaps for the studied halides reveals that their efficiency in light-emitting applications is limited as compared to direct-gap materials. Nonetheless, the bandgap values in the near-UV to visible range indicate possible applicability for applications requiring low intrinsic carrier concentration and strong thermal stability as well as for UV optoelectronic devices, dielectric layers, and insulating components. The influence of lattice expansion and electronic structure alteration on the band-edge states is further reflected in the regular fluctuation in bandgap with alkali-metal replacement. Moreover, the TDOS plots, which are plotted parallel to the band structures of K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, reveal that the dispersion curves in the electronic band structures perfectly align with the TDOS plots. Significant TDOS features are observed in the valence band region between about −10 eV and 0 eV, but the conduction band states appear above the Fermi level and continue up to around 10 eV. While the broader features in the conduction band suggest more dispersive states, the sharp peaks close to the VBM indicate relatively concentrated electronic states. Moving from K to Cs causes a systematic widening of the bandgap, which can be explained by lattice expansion and less orbital overlap as the A-site cation radius increases. Furthermore, the PDOS plots for the studied halides are plotted parallel to the TDOS plots, which aid in analyzing the atomic and orbital contributions governing the electronic structure.41 According to the PDOS plots, the valence band in K2AlCuF6 is predominantly dominated by the F-p states, while the Cu-d states report strong hybridization with the F-p states near the top of the valence band, indicating a strong Cu–F covalent interaction. K-s states also exhibit a prominent influence in valence band. For K2AlCuF6, the valence band is mainly composed of the Cu-d and F-p states with minor addition from the Al-s and Rb-p states. Similarly, for Cs2AlCuF6, the dominance of the Cu-d states near the conduction band is noticed with a slight contribution from the F-p and Cu-s states. The Al-s states report a minor contribution in the valence region for all materials, indicating that aluminum does not actively participate in the formation of the valence band maxima. The contribution of all other states is so small that they are not visible in the graph, so we neglect them. The A-site cations (K, Rb, and Cs) contribute negligibly near the band edges, confirming their ionic role and minimal direct involvement in electronic transport. This behavior indicates that the A-site cations primarily act as charge compensators and structural stabilizers rather than contributing directly to the electronic states responsible for optical and transport properties. Electronic properties of (a) K2AlCuF6, (b) Rb2AlCuF6 and (c) Cs2AlCuF6. Optical characteristics The optical analysis of the material describes its interaction with the electromagnetic radiation, which is the fundamental concept in designing the optoelectronic devices.42 These interactions further lead to multiple phenomena that describe the material's usage in light-harvesting devices.43 The Kramer–Kronig equations are given below to analyze such phenomena.6ε(ω) = ε1(ω) + iε2(ω)Here, the real part is described as ε1(ω), which is associated with the dispersion and polarization in the material caused by the influence of an external electric field, while the imaginary part is represented as ε2(ω) and is associated with the energy loss and absorption of the incident light in the material. The mathematical expression for ε1(ω) and ε2(ω) is given as:78 The optical properties of K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 are presented in Fig. 3. The ε1(ω) of the studied halides is presented in Fig. 3(a). The static ε1(ω) for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 is noticed as 1.25, 1.248 and 1.4, respectively. This increment in the static value is mathematically aligned with the Penn model, which is stated as . For all the studied halides, minor peaks are noticed in the energy range of 4 eV to 5 eV, whereas the maximum peaks of ε1(ω) for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 are noticed at 5.56 eV, 12.72 eV and 11.71 eV, respectively. The imaginary part for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 is plotted in Fig. 3(b). Minor peaks are noticed in the range of 5 eV to 8 eV, whereas the maximum peaks are noticed at 13.45 eV, 13.26 eV and 12.62 eV for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, respectively. This trend implies that the studied halides possess high absorption and scattering ability in the UV region. The refractive index n(ω) defines a material's tendency to bend or slow down light, and for the studied halides (Fig. 3(c)), the static n(ω) is noticed as 1.08, 1.09 and 1.19 for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, respectively, which gradually increases to the maximum values of n(ω), reported at 5.56 eV, 12.80 eV and 12.20 eV, respectively. This implies that at low energies, the materials are very transparent. For the studied halides, the refractive index rises as photon energy increases because light interacts more intensely. Strong electronic transitions, which show the energies where the optical dispersion is the greatest, are correlated with the peak refractive index. The absorption coefficient describes a material's strength to absorb the incident light per unit centimeter, and for the studied halides, it is plotted in Fig. 3(d). Minor peaks of absorption coefficient are reported from 5 eV to 8 eV, whereas the maximum absorption peaks are noticed at 13.56 eV for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6. Among the studied halides, Cs2AlCuF6 reports the maximum value of absorption coefficient, which implies this material is highly suitable for protection against UV radiation as compared to K2AlCuF6 and Rb2AlCuF6. The reflectivity of a material describes its ability to reflect the incident light, and Fig. 3(e) demonstrates the reflectivity plots for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6. The reflectivity for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 is noticed at 0.0015, 0.0022 and 0.0079, while the maximum reflectivity peaks are noticed at 13.56 eV in the UV region. The energy loss function defines the dissipation and scattering phenomena in a material, and for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, it is plotted in Fig. 3(f). The energy loss function plot suggests that the minimum energy loss peaks for the studied halides are noticed in the energy range of 5 eV to 8 eV, whereas the maximum peaks are noted at 13.45 eV, 13.26 eV and 12.62 eV for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, respectively. According to the optical study, K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 have low static refractive indices and are extremely transparent at low photon energies. Refractive index, absorption, and reflectivity increase with photon energy, suggesting increased light-matter interactions and electronic transitions. The UV area has the highest absorption and energy loss peaks, indicating that these halides have a high capacity for scattering and dissipation. Cs2AlCuF6 has the maximum absorption among all the studied halides, which makes it ideal for light-harvesting and UV protection applications. The computed optical parameters for A2AlCuF6 (A = K, Rb, and Cs) are comparable with similar perovskite fluorides, as presented in Table 2. Optical properties of A2AlCuF6 (A = K, Rb, and Cs). Table 2Computed static values of optical parameters for A2AlCuF6 (A = K, Rb, and Cs)Compound ε(0) n(0) R(0)K2AlCuF61.251.080.0015Rb2AlCuF61.241.090.0022Cs2AlCuF61.401.190.0079 Similar materials K2SbAuF6 (ref. 44)1.931.380.026Rb2SbAuF6 (ref. 44)1.961.390.027Cs2InAuF6 (ref. 45)1.251.110.09Cs2TlAuF6 (ref. 45)2.101.490.13 Computed static values of optical parameters for A2AlCuF6 (A = K, Rb, and Cs) Thermoelectric properties In order to address the global energy issues and reduce environmental pollution, new energy materials are essential.46 Thermoelectric materials are environmentally friendly functional materials that can directly transform heat energy into electrical energy. Because of their many useful applications, such as in radioisotope thermoelectric generators, and benefits such as waste heat utilization, thermoelectric materials are regarded as promising candidates for addressing the challenges of energy crises.47 Scientists are in constant search for materials that can convert waste heat into useful energy. In this context, perovskite halides are considered an exceptional choice for the production of green energy as these materials possess favorable thermoelectric properties, including lower thermal conductivity and higher electrical conductivity.48–50 In this section, we investigated the thermoelectric potential of K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 by employing the semi-classical approach implemented in the BoltzTraP code. The thermoelectric properties computed for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 are presented in Fig. 4. Fig. 4(a) demonstrates the electrical conductivity plots for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6. In a semiconducting material, the electrical conductivity is described as σ = neµ + npµ. Here “neµ” represents the conductivity in the conduction band due to electrons, whereas “npµ” represents the conductivity in the valence band due to holes. The electrical conductivity is noticed as zero for K2AlCuF6 at 50 K, whereas for Rb2AlCuF6 and Cs2AlCuF6, the electrical conductivity is noticed as 6.0 × 1017 Ω−1 m−1 s−1 and 4.0 × 1017 Ω−1 m−1 s−1, respectively. With the increase in temperature, the σ/τ increases for all the three studied halides, and maximum peaks of electrical conductivities for K2AlCuF6 and Rb2AlCuF6 are noticed at 500 K as 3.75 × 1018 Ω−1 m−1 s−1, whereas for Cs2AlCuF6, the maximum electrical conductivity is observed as 4.25 × 1018 Ω−1 m−1 s−1. Moreover, it is noticed that as the temperature is increased, the conductivities of all the halides decline. Fig. 4(b) demonstrates the thermal conductivity plots for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6. The capacity of a material to conduct heat is known as thermal conductivity. It measures the effectiveness of thermal energy transfer through a material, either by electrons in metals or lattice vibrations in insulators.51 While low-conductivity materials function as thermal insulators, high-conductivity materials transport heat rapidly. As we are employing BoltzTraP, it only aids in assessing the electronic thermal conductivity. The thermal conductivity plots for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 reveal an increasing trend with temperature, and the maximum values are noticed at 400 K, 500 K and 550 K as 5.5 × 1013 Wm−1 K−1 s−1, 3.8 × 1013 Wm−1 K−1 s−1 and 4.8 × 1013 Wm−1 K−1 s−1 for K2AlCuF6, Cs2AlCuF6 and Rb2AlCuF6, respectively. Furthermore, it is noticed that the thermal conductivities for all the studied halides decline as temperature is increased. Among the studied halides, K2AlCuF6 has the highest thermal conductivity, indicating the most efficient heat transfer mechanism and better heat dissipation in thermal devices based on it than in devices based on Cs2AlCuF6 and Rb2AlCuF6. The Seebeck coefficient aids in analyzing a material's tendency to generate thermal voltage under the influence of a temperature gradient.52 A tiny variation in the material's temperature gradient leads to higher thermal voltage generation, resulting in a higher Seebeck coefficient, which is crucial for effective thermoelectric devices. The Seebeck coefficient of K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 is demonstrated in Fig. 4(c). At 50 K, the Seebeck coefficient values for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 are noticed to be 530 µV K−1, 300 µV K−1 and 256 µV K−1, respectively. These values suggest that all the three halides are excellent contenders for generating thermal voltage at lower temperatures; however, as the temperature is raised, the Seebeck coefficient declines to 120 µV K−1, 110 µV K−1 and 100 µV K−1 at 800 K for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, respectively. A material's ability to convert waste heat into useful energy is demonstrated through its power factor, which is plotted in Fig. 4(d) for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6. A higher value of power factor indicates a better thermoelectric energy conversion efficiency. Initially at 50 K, the value of power factor for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 is reported to be 1.0 × 1010 Wm−1 K−2, 4.0 × 1010 Wm−1 K−2 and 3.8 × 1010 Wm−1 K−2, respectively. At 300 K, 200 K and 250 K, the maximum values of the power factor is reported for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 as 1.04 × 1011 Wm−1 K−2, 8.1 × 1010 Wm−1 K−2 and 1.0 × 1011 Wm−1 K−2, respectively. This suggests that among the studied halides, K2AlCuF6 possesses the highest thermoelectric efficiency. The figure of merit is a dimensionless quantity, which is the most crucial thermoelectric trait in analyzing the thermoelectric properties of any material. Materials with high ZT values are considered viable for exhibiting good thermoelectric performance.53Fig. 4(e) depicts the ZT plots of K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6. At 50 K, the ZT values for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6 are noticed as 0.95, 0.81 and 0.85, respectively, which implies that at lower temperatures, the studied halides possess a higher Seebeck coefficient value, which is directly linked with the materials ZT value. Furthermore, as the temperature is increased till 250 K-300 K, the ZT value declines to 0.82, 0.74 and 0.76 for K2AlCuF6, Rb2AlCuF6 and Cs2AlCuF6, respectively. These thermoelectric traits for the studied halides reveal that K2AlCuF6 is an exceptional contender for the production of green energy compared to Rb2AlCuF6 and Cs2AlCuF6. Thermoelectric properties of A2AlCuF6 (A = K, Rb, and Cs). The computed thermoelectric parameters for A2AlCuF6 (A = K, Rb, and Cs) are comparable with similar perovskite fluorides, as presented in Table 3. Table 3Computed thermoelectric parameters for A2AlCuF6 (A = K, Rb, and Cs)Compounds σ/τ k e/τ ZT K2AlCuF63.75 × 10185.5 × 10130.82Rb2AlCuF63.75 × 10183.8 × 10130.74Cs2AlCuF64.25 × 10184.8 × 10130.76 Similar materials K2SbAuF6 (ref. 44)1.99 × 10184.9 × 10130.76Rb2SbAuF6 (ref. 44)2.28 × 10185.4 × 10130.75 Computed thermoelectric parameters for A2AlCuF6 (A = K, Rb, and Cs) Conclusion In conclusion, double perovskites A2AlCuF6 (A = K, Rb, and Cs) exhibit promising properties for renewable energy harvesting, as revealed by the first-principles DFT-based simulation. Structural analysis shows that replacing the A-site cation from K → Rb → Cs leads to an increase in lattice constants, unit cell volumes, and ground-state energies, accompanied by a decreasing bulk modulus. Negative formation energies and favorable tolerance factors confirm the thermodynamic and structural stability of these compounds. Electronic structure calculations indicate indirect bandgap that increase along the series (2.80 eV for K2AlCuF6, 2.78 eV for Rb2AlCuF6, and 3.10 eV for Cs2AlCuF6), while optical analysis identifies Cs2AlCuF6 as the most efficient UV absorber with minimal energy loss, making it a strong candidate for UV shielding and photo-detector applications. Furthermore, thermoelectric properties computed via BoltzTraP reveal high ZT values at elevated temperatures, highlighting the potential of all the three halides for waste-heat energy conversion. Overall, these findings position A2AlCuF6 (A = K, Rb, and Cs) perovskites as versatile materials for optoelectronic and thermoelectric energy applications. Conflicts of interest The authors have declared no conflicts of interest.