Chemical composition, seasonal variability and source identification of PM2.5 in an urban background site in Medellín—Colombia Authors: Mauricio A. Correa-Ochoa, Miriam Gómez-Marín, Kelly Viviana Patiño-López, Luisa M. Gómez Pelaez, Santiago A. Franco, Dipesh Rupakheti, Dipesh Rupakheti, Dipesh Rupakheti Published: 2026 ABSTRACT This study assessed the chemical characterization of PM2.5 at an urban background site in Medellín—Colombia, a city situated in a topographically constrained valley exposed to air pollution accumulation influenced by its complex Andean topography and a combination of local and regional emission sources. A total of 112 samples of PM2.5 were collected between March 2019 and March 2020, samples went through comprehensive sampling and chemical characterization (ICP-MS for metals, ion chromatography for anions, thermal/optical analysis for carbonaceous species). Daily PM2.5 concentrations ranged from 8.15 to 37.86 μg/m3 (mean: 21.73 ± 6.75 μg/m3). Principal Component Analysis (PCA) identified five major pollution sources, with mineral and resuspended dust (33.6% of explained variance) and secondary aerosols (17.0%) being the most prominent. The study area experiences clearly defined dry and wet periods, marked by distinct precipitation regimes. During the year these atmospheric conditions influence the concentration levels of pollutants. The integration of NOAA HYSPLIT back-trajectories and NASA FIRMS (VIIRS J2) fire hotspot data revealed long-range transport from the Magdalena, Orinoco and Amazon basins, deteriorating local air quality specially during dry periods. While local traffic and industrial emissions constitute a constant baseline, regional biomass burning and unfavorable meteorological conditions are the primary drivers of episodic high-pollution events. The study underscores the need for targeted strategies addressing both persistent sources as traffic or industrial emissions and episodic events to mitigate health and environmental impacts. Introduction Urban environments are particularly affected by poor air quality [1]. The presence of atmospheric pollutants is due to local [2] and long-range transport sources [3]. PM2.5 (particles with a diameter of less than 2.5 μm) is an atmospheric pollutant, that has attracted considerable interest worldwide due to its implications for public health and the environment [4]. PM2.5 can travel long distances [5] and undergo transformation through photochemical reactions or interactions with other compounds present in the atmosphere [6]. The origin of PM2.5 particles can be classified as primary, when emissions of the pollutant occur directly from the emission source, or secondary, when the pollutant is formed through from reactions that occur in the atmosphere [7]. These particles are microscopic, which allows them to penetrate the lungs and remain deposited there [8]. They can also enter the bloodstream, leading to respiratory and cardiovascular diseases [9]. The relationship between this pollutant and other types of conditions has been studied. Some examples include cognitive decline [10], damage to epithelial cells [11], and growth deficits [12]. This pollutant has also been identified as a potential threat to ecological systems [13]. The inhalation of these particles by animals can cause adverse effects [14], and bioaccumulation within plant tissues has also been observed [15]. On the other hand, PM2.5 can affect the climate and hydrology [16]. It can alter the amount of solar radiation that reaches the earth’s surface by changing the distribution of solar energy in the atmosphere and by modifying the hygroscopic growth of cloud condensation nuclei [17]. PM2.5 is the main cause of smog, which reduces visibility in cities [18]. Economic and industrial development is linked to increased emissions of air pollutants [19,20]. PM consists of a heterogeneous mixture of materials emitted from both anthropogenic (e.g., mining, agriculture, industry, transportation, and construction) and natural (e.g., the resuspension of crustal material, volcanic eruptions, and suspension of sea salts) sources [21,22]. Forest fires and biomass burning are also significant sources of this pollutant. Due to the diversity of sources, the pollutant’s composition is heterogeneous [23]. However, studies have determined that the composition of PM is primarily composed of ions, metals, minerals [24], and carbon compounds [25], among other components [26]. Each group of compounds has specific implications. For instance, high concentrations of heavy metals are linked to diseases like cancer [27]. Regarding anions, sulfate is associated with environmental issues such as acid rain [28], while areas affected by nitrate pollution are often characterized by reddish skies [29]. Carbonaceous species play an important role in the climate balance as they contain particles that absorb large amounts of energy [30]. Organic carbon (OC) contains a variety of aliphatic, aromatic, and acidic compounds, those are compounds with a complex chemical composition containing numerous toxic substances, such as polycyclic aromatic hydrocarbons (PAHs), which are linked to respiratory and cardiovascular diseases [31,32]. Medellín, located in a narrow valley in the Colombian Andes, is particularly exposed to PM2.5. Rapid population growth and urbanization have led to increased air pollution and have affected the quality of life of its inhabitants. Recent studies have examined the health effects of short and long-term exposure to air pollutants, as well as the local incidence of diseases caused by PM2.5 exposure [33]. These studies have found a relationship between PM2.5 exposure and acute and chronic respiratory and cardiovascular conditions, as well as neoplasms [34]. PM2.5 has also been found to have both cytotoxic and genotoxic potential [35]. An estimated 553 deaths per year in Medellín are attributable to PM2.5 exposure [33,36]. It also has also been estimated that PM2.5-related deaths could increase by over 150% between 2016 and 2030 [37]. Previous studies have analyzed the PM2.5 problem in Medellín from different perspectives. These studies have used predictive models to estimate the pollutant’s impact [37,38], analyzed the influence of specific sources [21], used spatial distribution models [39], and performed chemical characterizations to determine its components and emission sources [4,35,40]. However, there are few studies that have examined the relationships between emission sources and how pollutants behave throughout the year, considering the city’s meteorological variations. The chemical characterization of PM2.5 samples includes the analysis of metals (using inductively coupled plasma mass spectrometry), ions (using ionic chromatography), and carbonaceous species (using thermo-optical methods). The sources of the pollutants were determined using principal component analysis (PCA). Samples were collected over the course of a year, taking into account the dry and wet seasons characteristic of the study region. This study characterizes PM2.5 particulate matter in an urban area of the city of Medellín, identifies the main emission sources, and compares pollutant concentrations during dry and wet periods in relation to regional climatic factors such as precipitation and wildfires reported both within the local urban domain and in other regions of the country. This approach improves understanding of how emissions, climate, and regional transport jointly control PM2.5 variability in complex urban environments. It provides evidence to design season-specific air quality strategies and to anticipate pollution episodes linked to climate variability and regional fires. Methodology Study area and sampling site Medellín is the second-largest city in Colombia. It is located in a narrow valley (Aburrá Valley) which is characterized by frequent thermal inversions and limited dispersion of pollutants [35]. The average temperature is 21.5 °C; the average total annual rainfall is 1685 mm. During the year, there are two dry seasons and two rainy seasons. The rainy seasons extend from the end of March to the beginning of June and from the end of September to the beginning of December [41]. The monitoring site is located at the Pedro Justo Berrio Institute in an urban area with densely populated characteristics (latitude: 6.243; longitude: −75.612; elevation: 1,614 m), close to the meteorological station Pedro Justo Berrio. The sampling point is on a 3-meter-high terrace more than 50 meters from major paved roads. Near the sampling point, there are quarries extracting materials for the brick industry, so samples captured at the station contain a mixture of urban emission sources. Fig 1 shows the location of the sampling point. Sampling point location in the urban area of Medellín. Map base layer from OpenStreetMap (© OpenStreetMap contributors). The figure illustrates the geographical placement of the monitoring station at the Pedro Justo Berrio Institute. Sampling design and filter collection Sample collection was performed following standardized procedures validated by the GHYGAM Laboratory of the Universidad Politécnica Colombiana Jaime Isaza Cadavid, in accordance with the Quality Assurance Instructions ID-MEA183 and the Sampling Instructions of its Management System, which is accredited according to ISO/IEC 17025 [42]. PM2.5 samples were collected using low-volume equipment (PQ200 by BGI Instruments®, flow rate: 16.67 L/min) with 47-mm-diameter Teflon filters, according to international reference methods (CFR 40, Appendix L to Part 50, Reference Method for Determining Fine Particulate Matter as PM2.5 in the Atmosphere, [43]). Before sampling, each Teflon filter was weighed three times, with an average difference of no more than 15 μg, using a microbalance with a resolution of 0.001 mg (Sartorius CPA26P). Prior to gravimetric analysis, filters were conditioned in a desiccator under controlled temperature and relative humidity before and after sampling to remove residual moisture and ensure mass stability, thereby reducing hygroscopic effects on PM2.5 determination. All samplings underwent flow calibration, and environmental conditions were recorded. Sampling times complied with the parameters described in the Protocol for Air Quality Monitoring [44], lasting 23 ± 1 hours between 12:00 a.m. and 12:00 p.m. A total of n = 112 samples were collected between April 2019 and March 2020 to determine PM2.5 concentrations and perform chemical composition analyses. The study period covers the biennial cycle of annual rainfall in Medellín; Table 1 shows the periods and the number of samples collected in each period. 10.1371/journal.pone.0350267.t001Table 1Samples by period collected between 2019 and 2020.Season (Year)PeriodSamples (n)Wet 1 (2019)March — May25Dry 1 (2019)June — August31Wet 2 (2019)September — November30Dry 2 (2019–2020)December — Febraury26 Samples by period collected between 2019 and 2020. After sampling, the PM2.5 samples are transported to the laboratory under the cold chain to ensure a temperature of 4 °C or lower during transport. The samples are also protected from light to prevent the loss of volatile and photosensitive compounds. Once in the laboratory, the samples underwent final temperature and humidity conditioning for a minimum of 24 hours. According to the volumes of filtered air for each sample, the concentration of PM2.5 in ambient air is calculated. Then, the samples were stored at −20 ± 3 °C until chemical characterization. Chemical characterization Metals by inductively coupled plasma mass spectrometry (ICP-MS). The content of metals was determined by ICP-MS in a Thermo Scientific instrument, model I CAP-RQ, using reference protocols and methods [45,46]. The technique is based on the coupling of a method to generate ions (inductively coupled plasma) and a method to separate and detect them (mass spectrometer). The sample material in solution is introduced by pneumatic nebulization into a radio-frequency produced plasma where energy transfer processes cause desolvation, atomization, and then ionization. The ions are extracted from the plasma through a pressure interface, produced by a vacuum pump, and separated based on their mass-to-charge ratio by a quadrupole mass spectrometer, which has a minimum capacity resolution of 1 amu (atomic mass unit) at 5% of the peak height. The ions transmitted through the quadrupole are detected by an electron multiplier detector, or by a Faraday detector, and the resulting information is processed by a data management system. Ions by ionic chromatography. The concentration of water-soluble ions (K+, Na+, Mg2+, Ca2+, SO 42−, NO 3−, F– and Cl–) in PM2.5 is determined by Ion Chromatography using the reference method [47] in Thermo Scientific Dionex Aquion reference equipment. A sample of the particulate material extraction in water is injected into a stream of carbonate-bicarbonate eluent for anions and metasulfonic acid for cations and passed through a series of ion exchangers where the ions of interest are separated according to their relative affinities and subsequently identified based on the basis of retention time compared to standard solutions of each ion. Quantitative determination is performed by measuring the peak area of each ion. Carbonaceous species by thermo-optical methods. Organic Carbon (OC) and Elemental Carbon (EC) are analyzed over temperature ramps in oxidizing and/or non-oxidizing atmospheres, using Thermal/Optical Reflectance (TOR) and Thermal/Optical Tramitance (TOT) methods. This analysis consists of heating a portion of the sample continuously with the detection of volatilized carbon or oxidized carbon coming out of the sample. With consistent standardization, these methods provide equivalent measurements of Total Carbon (TC) donde TC = EC + OC and define the split between OC and EC and their fractions, based on combinations of combustion temperatures, residence time at each temperature, the composition of the atmosphere surrounding the sample, and the light reflected or transmitted through the filter. Organic and elemental carbon are determined by the NIOSH 5040 method, applying the experimental conditions established in the protocol [48] and using the Sunset thermo-optical meter, reference 5L. The principle of measurement consists of differentiating EC and OC in atmospheric particles collected and the detection of methane produced by both fractions [49]. Meteorological context and regional transport assessment To characterize the seasonal variability of the study area, precipitation data were obtained from the Institute of Hydrology, Meteorology, and Environmental Studies (IDEAM), specifically from the station located at the Olaya Herrera Airport (6.22° N; −75.59° W). Complementary to the local meteorology, the influence of regional biomass burning emissions was evaluated using active fire data retrieved from the NASA Fire Information for Resource Management System (FIRMS) [50]. We utilized the VIIRS sensor aboard the NOAA-20 satellite (product J2_VIIRS_C2, 375 m spatial resolution) to identify hotspots across potential source regions during the studied period, including the Magdalena, Orinoco and Amazon basins. These data were spatially filtered and aggregated into daily counts to assess their relationship with biomass burning tracers detected at the sampling site. Finally, to determine the origins of air masses arriving at the Aburrá Valley, backward trajectories were computed using the NOAA HYSPLIT model with GDAS1 meteorological data (1° resolution) [51,52]. Trajectories were calculated for a duration of 96 h backwards in time at [12:00 UTC], setting arrival heights at [500, 1000, and 1500] m above ground level (AGL) to capture transport dynamics within and above the planetary boundary layer. Data and source analysis A descriptive statistical analysis was performed. Subsequently, the data for each period was analyzed in order to reconstruct the PM2.5 mass. Principal component analysis (PCA) was performed to identify the sources of the pollutant, from the whole species-resolved dataset. Prior to the analysis, all the chemical species with more than 50% missing values were excluded, and the remaining concentrations below the detection limit were imputed as half of the limit. Spearman correlation tests were then used to eliminate variables that did not exhibit at least moderate correlation (ρ<|0.5|, p > 0.05) with other species, ensuring that only interrelated tracers remained. The concentration data were then mean-centered and variance-scaled to standardize differences in magnitude and units between ions, metals, and carbonaceous species. Then, a PCA was performed on the resulting correlation matrix using the varimax rotation criterion to improve the interpretability of component loadings. Each rotated principal component (PC) was interpreted as a distinct emission source based on the pattern of highly loaded species. The number of components retained captured at least 70% of the total variance in the dataset. The procedures were performed using R Studio 2026.0, and Python 3.11.9 software. The data and procedures developed for the statistical procedures are available and replicable through the material attached to this work (S1 File) Results and analysis The average concentration of PM2.5 was 21.73 ± 6.74 μg/m3 during the study period, with maximum (37.9 μg/m3) and minimum (8.1 μg/m3). Among the study periods, Dry 2 had the highest average concentration of the pollutant, while the lowest concentration was observed in the Dry 1 period. OC concentrations remained stable between periods, while EC concentrations were significantly lower in the dry periods. Table 2 shows a summary of the main species analyzed. 10.1371/journal.pone.0350267.t002Table 2Average and standard deviation of the main analyzed species (μg/m3) over the studied periods.VariableGeneralWet 1Dry 1Wet 2Dry 2PM2.521.729 ± 6.74721.932 ± 7.21018.204 ± 5.00219.918 ± 7.44626.683 ± 6.303Organic Carbon (OC)7.286 ± 3.0907.755 ± 3.8465.804 ± 1.9167.741 ± 3.5577.930 ± 2.470Elemental Carbon (EC)0.896 ± 0.4691.095 ± 0.5370.652 ± 0.2121.167 ± 0.5610.724 ± 0.213Sulfate (SO 42−)1.806 ± 0.9982.638 ± 1.4621.142 ± 0.4521.650 ± 0.6401.945 ± 0.627Nitrate (NO 3−)0.617 ± 0.4210.799 ± 0.6380.350 ± 0.2450.692 ± 0.2870.663 ± 0.317Chloride (Cl–)0.156 ± 0.1440.124 ± 0.1690.077 ± 0.0700.138 ± 0.1540.277 ± 0.150Fluoride (F–)0.021 ± 0.0180.014 ± 0.0090.022 ± 0.0150.021 ± 0.0130.029 ± 0.029Sodium (Na+)0.119 ± 0.0890.098 ± 0.0510.079 ± 0.0380.177 ± 0.119–Potassium (K+)0.168 ± 0.1130.213 ± 0.1500.106 ± 0.0570.190 ± 0.079–Magnesium (Mg2+)0.026 ± 0.0230.024 ± 0.0190.016 ± 0.0120.038 ± 0.030–Calcium (Ca2+)0.268 ± 0.1830.263 ± 0.2030.201 ± 0.1280.339 ± 0.193–Iron (Fe)0.429 ± 0.3660.509 ± 0.4590.270 ± 0.1740.547 ± 0.4070.395 ± 0.347Aluminum (Al)0.380 ± 0.3520.456 ± 0.4480.211 ± 0.1510.509 ± 0.3790.344 ± 0.315All concentrations are reported in μg/m3. Values represent the mean ± one standard deviation. Cations (Na+, K+, Mg2+, Ca2+) were not available for the Dry 2 period. Average and standard deviation of the main analyzed species (μg/m3) over the studied periods. All concentrations are reported in μg/m3. Values represent the mean ± one standard deviation. Cations (Na+, K+, Mg2+, Ca2+) were not available for the Dry 2 period. Table 3 shows the maximum, minimum, and average values in each study period for PM2.5, where it can be seen that in the Dry 1 period there were the lowest concentration peaks and on average the lowest concentrations, contrasting with what happened in Dry 2, where the concentrations reached maximum peaks. 10.1371/journal.pone.0350267.t003Table 3Summary of PM2.5 (μg/m3) during the study period.PeriodMinMaxMeanWet 111.1637.0921.93Dry 110.0626.5718.43Wet 28.1537.8619.64Dry 212.1835.1423.50Minimum, maximum, and average PM2.5 concentrations for the four meteorological periods in the Medellín urban area. Summary of PM2.5 (μg/m3) during the study period. Minimum, maximum, and average PM2.5 concentrations for the four meteorological periods in the Medellín urban area. Fig 2 offers a comparison of the chemical compounds that were found most frequently in the samples characterized throughout each period, where it is clearly evident that OC is the main component of the PM2.5 mass, followed by sulfate. During the study period, it is evident that the concentration of soluble ions constitutes most of the PM2.5 mass after the carbonaceous species. Concentration (μg/m3) of the main species. Comparison of the most frequent chemical compounds found in PM2.5 samples across the four study periods. The chart illustrates that Organic Carbon (OC) is the primary component of the mass, followed by sulfate and other soluble ions. Among the metals analyzed, it was found that, on average, the concentrations of carbonaceous species and sulfate are the highest, followed by nitrate, Al, Na, Ca, Fe, K, Si, Mg, Zn, Ti, Ba, Cu, Pb, Mn, Ni, Cr, V, Sb, As, Se, Cd, Mo, Co, Hg, Ag and Be. Fig 3 shows the boxplot graphic for each period in which the differences between the magnitudes and variability of EC, OC, and PM2.5 pollutants can be seen. OC has intermediate concentrations, with a median of approximately 6 μg/m3, but shows several significantly high outliers exceeding 12 μg/m3, while EC shows the lowest concentrations and the least variability, with a very narrow box and a median just above 1 μg/m3. Boxplot for PM2.5, and OC and EC species for each period. The figure illustrates the distribution, medians, and outliers for the major carbonaceous fractions and total PM2.5 mass. Differences in magnitude and seasonal variability are highlighted for each study period. Fig 4 shows the temporal variation of carbonaceous compounds and PM2.5 during the study period, where concentrations remain relatively stable, with peaks during dry and wet periods. The highest concentrations of the pollutant were obtained in the final phase of sampling. Distribution of PM2.5, OC and EC species during the study period. Temporal variation of total mass and carbonaceous fractions. The series illustrates stable baseline levels with episodic peaks occurring across different meteorological seasons, reaching maximum values during the final sampling phase. In the Dry 2 period, there is a tendency for PM2.5 concentrations to increase, the concentration peaks occurred during the wet periods, the OC and EC concentrations are closely aligned with PM2.5 concentrations, presenting peaks of maximum values on similar dates, the OC/EC ratio had an average value above 6 throughout the study period, mainly associated with biomass burning [53,54]. However, concentrations vary greatly, and pollution peaks could be associated with activities outside the valley [55]. National regulations estimate a concentration below 37 μg/m3 with an acceptable AQI. During the study period, only two samples were above this level both in the wet periods [44]. The study area delimited for the evaluation of hot spots [−78°W, −3°N; −64°W, 13°N] considering the Colombian territory and part of eastern Venezuela, shows the number of hot spots per km2, in this case it can be seen that in the north of the continent there is usually a greater number of hot spots in the first half of the year and a notable reduction for the second half. Fig 5 shows the fires reported during the study period for the aforementioned area, where relationships can be found between the number of hot spots and PM2.5 concentrations. Hotspots dynamics (North of South America) vs PM2.5 concentration. Temporal correlation between regional fire activity and local particulate matter levels. The figure illustrates the seasonal density of hotspots across Colombia and Venezuela in relation to the observed PM2.5 peaks in Medellín. To gain a clearer picture of what is happening in the region, a cross-section was taken for the Aburrá Valley [−75.8°W, 6.0°N; −75.3°W, 6.5°N], where 141 occurrences were identified for the study period, concentrated mainly in the dry seasons. Fig 6 clearly shows how specific events coincide with peaks in PM2.5 concentration in the region. Hotspots dynamics in the Aburrá Valley vs PM2.5 concentrations. The figure illustrates the temporal coincidence between localized fire events (hotspots) within the valley’s cross-section and the highest recorded peaks of particulate matter, particularly during the dry periods. On the other hand, precipitation regimes in the city appear to be related to peak PM2.5 concentrations during wet periods; Fig 7 shows the trend of precipitation records from the Olaya Herrera station, located near the study area. Precipitation trend at Olaya Herrera’s station vs PM2.5 concentration. Comparison between daily rainfall accumulation and particulate matter levels. The figure highlights how precipitation events influence the scavenging or accumulation of PM2.5 during the transition between seasons. The above information suggests that different conditions affecting air quality and particulate matter pollution exist in the study area. In dry periods, there is a strong presence of fires in the vicinity of the valley and in large basins of the country. In wet periods, higher levels of precipitation and lower levels of solar radiation hinder the dispersion of pollutants. This is contrasted with Fig 8, which shows critical dates with pollution peaks (April 2019 Wet 1 period; September 2019 Dry 1 period; November 2019 Wet 2 period; March 2020 Dry 2 period). Back-trajectories vs hotspots in the north of South America. Integration of HYSPLIT backward trajectories and FIRMS hotspot data for four critical pollution events. The map illustrates the origin of air masses and their intersection with regional biomass burning areas characterized by high (A and C) and low (B and D) hotspot densities. At the first pollution peak, it is evident that the air currents do not specifically originate from areas of the country most affected by fires. However, during this period, there are high levels of precipitation at the beginning of September, coinciding with a lower density of hotspots and lower PM2.5 concentration values reported during the study period. In November, when there is not a high density of hotspots in the region, the high pollutant concentrations could be attributed to the region’s atmospheric conditions, whereas in March 2020, when the highest fire density peaks are in northern South America and the Aburrá Valley, pollutants are transported directly to the valley, particularly from the lower Magdalena River basin. Although the arguments are based on the evidence provided by the different parameters, the anthropogenic emission characteristics of the city, which are mainly characterized by the vehicle fleet and industrial sector, cannot be ignored. The 2022 emissions inventory determined that mobile sources in Medellín emit slightly more than 3,500 ton/year of PM2.5, while industrial sources emit approximately 160 ton/year. Therefore, the chemical characterization and determination of sources complement the presented analysis. Table 4 shows the results of the correlation analysis where high ratios between species such as Al and Si are identified, indicating that their presence comes from the same source, usually attributable to crustal material [56,57]. The high correlation between PM2.5 and OC (0.82) is related to the high carbonaceous species content in the pollutant, which averages 34% of the mass and reaches 78% in the Dry 2 period. 10.1371/journal.pone.0350267.t004Table 4Spearman correlation factor analysis among chemical species and PM2.5.PM2.5Na+Mg2+AlSiK+Ca2+F–Cl– NO3− SO42− OCEC PM 2.5 1–––––––––––– Na + 0.401––––––––––– Mg 2+ 0.600.721–––––––––– Al 0.680.580.771––––––––– Si 0.680.580.771.001–––––––– K + 0.600.200.400.410.411––––––– Ca 2+ 0.510.580.760.780.780.281–––––– F – 0.480.430.540.480.480.370.351––––– Cl – 0.620.460.470.460.460.380.380.661–––– NO 3− 0.550.110.120.140.140.47−0.030.320.451––– SO 42− 0.810.450.490.480.480.460.360.430.480.441–– OC 0.820.410.400.390.390.650.250.490.530.580.611– EC 0.630.050.090.080.080.57−0.060.260.410.420.410.571Correlation is significant at the 0.05 level (2-tailed). Bold values indicate strong correlation (ρ>0.7). Values of 1.00 between Al and Si suggest a common crustal origin. Spearman correlation factor analysis among chemical species and PM2.5. Correlation is significant at the 0.05 level (2-tailed). Bold values indicate strong correlation (ρ>0.7). Values of 1.00 between Al and Si suggest a common crustal origin. Table 5 shows the loading values of the PCA, grouping the variables into five principal components (PC) representing common emission sources accounting for more than 70% of the total variance. PC1 is dominated by elements of crustal or soil dust origin, with high loadings for Al, Si, Ca, Ti, Fe, Mg and Ba [58,59]. PC2 represents the source of mixed combustion and secondary aerosols, as it groups the PM2.5 mass with its main carbonaceous components (OC, EC) and secondary anions (NO 3−, SO 42−) [60,61]. PC3 represents a soluble ion factor, related to biomass burning (high K+ loading) [62,63]. PC4 identifies an industrial or non-exhaust emission source, highlighted by high loadings of heavy metals such as Zn and Pb [64,65]. Finally, PC5 with F– and Cl– halogens, suggesting specific industrial sources [66,67]. 10.1371/journal.pone.0350267.t005Table 5Principal components loadings for identified PM2.5 sources.VariablePC1PC2PC3PC4PC5Na0.529–––0.425Mg0.734––––Al0.953––––Si0.953––––Ca0.844––––Ti0.953––––Fe0.848––––Ba0.866––––NO 3−–0.697–––SO 42−–0.844–––OC–0.816–––EC–0.686–0.443–Na+––0.567––K+––0.777––Mg2+––0.760––Ca2+––0.622––Zn–––0.877–Pb–––0.819–Cu–––0.403–F–––––0.802Cl––0.469––0.608Extraction method: Principal Component Analysis. Rotation method: Varimax with Kaiser normalization. Only loading values over 0.4 are shown for clarity. Principal components loadings for identified PM2.5 sources. Extraction method: Principal Component Analysis. Rotation method: Varimax with Kaiser normalization. Only loading values over 0.4 are shown for clarity. Five different components explained 72% of the variance. PC scores were calculated for each sample to estimate the relative contribution of each inferred source to PM2.5 mass. The resulting source profiles and time series of component scores provide a foundation for interpreting seasonal and episodic variations in urban PM2.5 pollution. The scree plot (see Fig 9) shows how much of the total variability in the dataset each principal component (PC) captures. The first component towers above the rest, explaining roughly one-third of the variance (33.6%). The second component adds another 17%, bringing just over half of the total. The third, fourth and fifth components each contribute progressively smaller—but still meaningful—portions: about 8.8%, 6.8% and 5.6%, respectively. A reference line drawn at 5 percent highlights that only the first five components rise above that threshold, suggesting they each carry at least the equivalent of one original variable’s worth of information. Beyond the fifth, every additional component explains less than 5% of the variance. Scree plot: Explained variance by principal component. The plot displays the percentage of variance explained by each eigenvalue. The first five components exceed the 5% threshold, collectively accounting for more than 70% of the total cumulative variance in the chemical species dataset. These five components capture the bulk of the meaningful structure in the data. After that, each extra dimension adds only small, incremental detail—likely representing finer patterns or statistical noise—so a five-component solution strikes a good balance between simplicity and fidelity. Discussion The findings from this source apportionment study at the Belén urban background station in Medellín provide insights into PM2.5 composition, seasonal dynamics, and emission sources. PCA results reveal five source profiles that collectively explain 71.8% of PM2.5 variability, aligning with Medellín’s unique geographical and anthropogenic context while offering actionable pathways for air quality management. Table 6 shows the resume of the source profiles. 10.1371/journal.pone.0350267.t006Table 6Detected sources through PCA.PCVariablesIdentified SourcesPC1Na, Mg, Al, Si, Ca, Ti, Fe, BaSoil dust, crustal materials, road dust resuspension, construction activitiesPC2NO3−, SO42−, OC, ECSecondary aerosol formation and mixed combustionPC3K, K + , Mg2 + , Ca2+Biomass burningPC4Zn, Pb, CuTraffic emissions (brake/tire wear), lubricants, industrial processesPC5F–, Cl–Industrial emissions (e.g., fertilizers, aluminum production) Detected sources through PCA. PC1 explains 33.6% of the variance, where elements derived from the earth’s crust are found. These compounds also have a greater presence in dry periods, which is associated with an increase in the resuspension of this type of materials under low humidity conditions [4]. The abrupt changes in the topography of the valley (mediated by the narrow valley characteristic) added to the daily activities of the valley such as construction, commerce and mobility. For PC2, the influence of PM2.5 associated with nitrates, sulfates, OC and EC add up to 17% of the sample variance. This factor includes the primary combustion sources of precursor aerosols and the formation of secondary species in the atmosphere, where high humidity and intense sunlight fuel the conversion of gases into particles. Previous studies in Medellín have noted similar trends, indicating that secondary aerosols, including those from biomass burning, drive about 22% of PM2.5 levels. Biomass burning, such as agricultural fires, is a major source of secondary organic aerosols [40]. OC/EC ratios above 8 were observed during wet seasons, suggesting a mix of biomass combustion and traffic emissions. PC3 (8.8% variance) identifies the potassium ion as an important indicator of biomass burning [68]. Although K concentrations peak in Dry 2 (0.38 μg/m3), its weaker correlation with OC during the dry season (ρ=0.46) suggests distinct combustion phases: agricultural fires during dry periods versus fuel burning accumulation year-round [69]. Zinc (Zn), lead (Pb), and copper (Cu) dominate PC4 (6.8% variance), implying traffic emissions from non-exhaust sources and industrial processes. Erratic Zn peaks (e.g., 1.1% in Wet 2) are likely due to brake and tire wear from Medellín’s dense vehicle fleet, while Pb points to industrial pollution. Although absolute concentrations are low (Zn: 0.089 μg/m3), these contaminants have a high toxic potential even in small traces [70]. Finally, fluoride and chloride form PC5 (5.6% variance), indicating industrial influences. Chloride is unlikely to have a marine link in Medellín due to its landlocked geography; therefore, industrial processes (e.g., chemical manufacturing) are the likely source. Although minor (<1% of PM2.5), their covariation (ρ=0.66) warrants monitoring given the toxicity of fluoride. PC1, associated with crystalline material, contributes more to the total mass of PM2.5 during dry periods due to increased dust resuspension and decreased precipitation. Conversely, the contribution of carbonaceous species and secondary aerosols (PC2) is greater during wet seasons because reduced solar radiation allows these compounds to remain in the atmosphere longer. The second dry season also coincides with events such as New Year’s Eve celebrations, where fireworks increase the levels of specific metals in the pollutant composition. During the study period, air quality in Medellín experienced distinct PM2.5 peaks associated with extraordinary events. Wildfires were major contributors; in August 2019, smoke from large-scale fires in the Brazilian Amazon reached the Aburrá Valley, causing several monitoring stations to record levels unhealthy for sensitive groups. On the other hand, Christmas and New Year’s Eve contributed to short-term spikes. Fireworks release large amounts of fine particulate matter, including metals and combustion products. Reports from environmental authorities show that on December 24, 25, 31, and January 1, PM2.5 concentrations rose by as much as 160% compared to prior days. Immediately after detonations, levels can spike up to eight times the normal concentration. Similar behavior is assumed for the December 2019–January 2020 period in this study. This aligns with the observation of record-high PM2.5 levels in March 2020. The combination of dry conditions and widespread wildfires created an environment where pollutants accumulated to extreme levels. Conversely, the return of rainfall in April 2020 led to a dramatic drop in PM2.5. The attribution of sources is complemented by the analysis of precipitation cycles and hotspot dynamics both inside and outside the Aburrá Valley, confirming that meteorological periods significantly impact the city’s air quality. Conclusions This study identified the composition and the main PM2.5 sources at an urban background site in the Aburrá Valley, including mineral and resuspended dust, secondary aerosols, industrial emissions, traffic-related sources, and biomass burning. These contributors exhibit distinct temporal patterns throughout the year, governed by a complex interaction between local emissions, regional transport, and the valley’s seasonal dynamics. The identified patterns across the seasonal periods—ranging from high concentrations in wet seasons to the varying density of local and regional hotspots in dry seasons—demonstrate that the valley’s air quality is governed by a shifting balance of internal accumulation and external transport. Furthermore, the transition between dry periods highlights a clear shift from the influence of local fire activity to a more significant impact of transboundary transport, particularly from the Magdalena River Basin. Future research should focus on establishing statistical evidence regarding the influence of environmental variables on these pollutant concentrations. Additionally, future efforts should aim to integrate these chemical and source-specific profiles with public health and epidemiological data to evaluate the associated health risks and toxicological impacts on the valley’s population. Utilizing these tracers and health-related datasets in future analytical frameworks will be essential to refine air quality management strategies and better protect the health of the population in topographically challenged urban environments. Supporting information Replication scripts and data processing codes. This compressed ZIP file contains all the R/Python scripts and processed datasets required to replicate the PCA analysis, HYSPLIT trajectories, and the statistical figures presented in this study. (RAR) 26 Nov 2025 -->PONE-D-25-58360-->-->Chemical Composition, Seasonal Variability, and Source Identification of PM2.5 at an Urban Background Site in Medellín—Colombia-->-->PLOS ONE Dear Dr. Correa Ochoa, Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.-->--> -->-->Please submit your revised manuscript by Jan 10 2026 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file. Please include the following items when submitting your revised manuscript:--> A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'. If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter. If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols. We look forward to receiving your revised manuscript. Kind regards, Dipesh Rupakheti Academic Editor PLOS ONE Journal Requirements: -->1. When submitting your revision, we need you to address these additional requirements.-->--> -->-->Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at -->-->https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and -->-->https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf-->--> -->-->2. We noticed you have some minor occurrence of overlapping text with the following previous publication(s), which needs to be addressed:-->--> -->-->KINETICS OF UO2 DISSOLUTION UNDER HIGHLY ALKALINE CONDITIONS: APPLICATION OF A THIN FILM CONTINUOUS-->-->FLOW-THROUGH REACTOR-https://upcommons.upc.edu/server/api/core/bitstreams/914956f5-d608-4414-a995-c1661105f8e2/content-->--> -->-->Characteristic Chemical Profile of Particulate Matter (PM2.5)—A Comparative Study Between Two Periods, Case Study in Medellín, Colombia- https://doi.org/10.3390/su17125380-->--> -->-->In your revision ensure you cite all your sources (including your own works), and quote or rephrase any duplicated text outside the methods section. Further consideration is dependent on these concerns being addressed.-->--> -->-->3. In your Methods section, please provide additional information regarding the permits you obtained for the work. Please ensure you have included the full name of the authority that approved the field site access and, if no permits were required, a brief statement explaining why.-->--> -->-->4. Thank you for stating the following financial disclosure: -->-->This research was funded by Ecopetrol (grant no. DHS 118) the Area Metropolitana del Valle de Aburrá (grant number 787) -->--> -->-->Please state what role the funders took in the study. If the funders had no role, please state: "The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript." -->-->If this statement is not correct you must amend it as needed. -->-->Please include this amended Role of Funder statement in your cover letter; we will change the online submission form on your behalf.-->--> -->-->5. We note that your Data Availability Statement is currently as follows: All relevant data are within the manuscript and its Supporting Information files.-->--> -->-->Please confirm at this time whether or not your submission contains all raw data required to replicate the results of your study. Authors must share the “minimal data set” for their submission. PLOS defines the minimal data set to consist of the data required to replicate all study findings reported in the article, as well as related metadata and methods (https://journals.plos.org/plosone/s/data-availability#loc-minimal-data-set-definition).-->--> -->-->For example, authors should submit the following data:-->--> -->-->- The values behind the means, standard deviations and other measures reported;-->-->- The values used to build graphs;-->-->- The points extracted from images for analysis.-->--> -->-->Authors do not need to submit their entire data set if only a portion of the data was used in the reported study.-->--> -->-->If your submission does not contain these data, please either upload them as Supporting Information files or deposit them to a stable, public repository and provide us with the relevant URLs, DOIs, or accession numbers. For a list of recommended repositories, please see https://journals.plos.org/plosone/s/recommended-repositories.-->--> -->-->If there are ethical or legal restrictions on sharing a de-identified data set, please explain them in detail (e.g., data contain potentially sensitive information, data are owned by a third-party organization, etc.) and who has imposed them (e.g., an ethics committee). Please also provide contact information for a data access committee, ethics committee, or other institutional body to which data requests may be sent. If data are owned by a third party, please indicate how others may request data access.-->--> -->-->6. When completing the data availability statement of the submission form, you indicated that you will make your data available on acceptance. We strongly recommend all authors decide on a data sharing plan before acceptance, as the process can be lengthy and hold up publication timelines. Please note that, though access restrictions are acceptable now, your entire data will need to be made freely accessible if your manuscript is accepted for publication. This policy applies to all data except where public deposition would breach compliance with the protocol approved by your research ethics board. If you are unable to adhere to our open data policy, please kindly revise your statement to explain your reasoning and we will seek the editor's input on an exemption. Please be assured that, once you have provided your new statement, the assessment of your exemption will not hold up the peer review process.-->--> -->-->7. We note that Figure 1 in your submission contain map images which may be copyrighted. All PLOS content is published under the Creative Commons Attribution License (CC BY 4.0), which means that the manuscript, images, and Supporting Information files will be freely available online, and any third party is permitted to access, download, copy, distribute, and use these materials in any way, even commercially, with proper attribution. For these reasons, we cannot publish previously copyrighted maps or satellite images created using proprietary data, such as Google software (Google Maps, Street View, and Earth). For more information, see our copyright guidelines: http://journals.plos.org/plosone/s/licenses-and-copyright.-->--> -->-->We require you to either present written permission from the copyright holder to publish these figures specifically under the CC BY 4.0 license, or remove the figures from your submission:-->--> -->-->a. You may seek permission from the original copyright holder of Figure 1 to publish the content specifically under the CC BY 4.0 license. -->--> -->-->We recommend that you contact the original copyright holder with the Content Permission Form (http://journals.plos.org/plosone/s/file?id=7c09/content-permission-form.pdf) and the following text:-->-->“I request permission for the open-access journal PLOS ONE to publish XXX under the Creative Commons Attribution License (CCAL) CC BY 4.0 (http://creativecommons.org/licenses/by/4.0/). Please be aware that this license allows unrestricted use and distribution, even commercially, by third parties. Please reply and provide explicit written permission to publish XXX under a CC BY license and complete the attached form.”-->--> -->-->Please upload the completed Content Permission Form or other proof of granted permissions as an "Other" file with your submission.-->--> -->-->In the figure caption of the copyrighted figure, please include the following text: “Reprinted from [ref] under a CC BY license, with permission from [name of publisher], original copyright [original copyright year].”-->--> -->-->b. If you are unable to obtain permission from the original copyright holder to publish these figures under the CC BY 4.0 license or if the copyright holder’s requirements are incompatible with the CC BY 4.0 license, please either i) remove the figure or ii) supply a replacement figure that complies with the CC BY 4.0 license. Please check copyright information on all replacement figures and update the figure caption with source information. If applicable, please specify in the figure caption text when a figure is similar but not identical to the original image and is therefore for illustrative purposes only.-->-->The following resources for replacing copyrighted map figures may be helpful:-->--> -->-->USGS National Map Viewer (public domain): http://viewer.nationalmap.gov/viewer/-->-->The Gateway to Astronaut Photography of Earth (public domain): http://eol.jsc.nasa.gov/sseop/clickmap/-->-->Maps at the CIA (public domain): https://www.cia.gov/library/publications/the-world-factbook/index.html and https://www.cia.gov/library/publications/cia-maps-publications/index.html-->-->NASA Earth Observatory (public domain): http://earthobservatory.nasa.gov/-->-->Landsat: http://landsat.visibleearth.nasa.gov/-->-->USGS EROS (Earth Resources Observatory and Science (EROS) Center) (public domain): http://eros.usgs.gov/#-->-->Natural Earth (public domain): http://www.naturalearthdata.com/-->--> -->-->8. Please upload a new copy of Figures 2a and 2b as the detail is not clear. Please follow the link for more information: https://journals.plos.org/plosone/s/figures-->--> -->-->9. Please remove your figures from within your manuscript file, leaving only the individual TIFF/EPS image files, uploaded separately. These will be automatically included in the reviewers’ PDF.-->--> -->-->10. If the reviewer comments include a recommendation to cite specific previously published works, please review and evaluate these publications to determine whether they are relevant and should be cited. There is no requirement to cite these works unless the editor has indicated otherwise. -->--> -->-->[Note: HTML markup is below. Please do not edit.] Reviewers' comments: Reviewer's Responses to Questions--> -->Comments to the Author 1. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #1: Partly Reviewer #2: Partly Reviewer #3: Partly ********** -->2. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #1: N/A Reviewer #2: Yes Reviewer #3: Yes ********** -->3. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #1: No Reviewer #2: Yes Reviewer #3: Yes ********** -->4. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #1: No Reviewer #2: Yes Reviewer #3: Yes ********** -->5. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #1: Some conclusions are not supported by the data. Eg, the traffic emissions contributions and their persistence. Also, it's difficult to check some conclusions as the months corresponding to PM2.5 concentrations are not mentioned in the figure. Statistical analysis: As the authors have not made their data analysis code available, it's not possible to check the statistical analysis. However, just reading the methods, the statistical analysis looks correct. Data availability - though the authors have mentioned that all the data are available without restriction, there is no reference to the raw data. There is no supporting information that contains the raw data or any online repository, eg., on GitHub. English: The language of the paper can be improved. Following is my feedback: Overall, the authors collected substantial data to identify sources of PM₂.₅. However, the manuscript would benefit from improvements in writing clarity and more detailed descriptions of study area and meteorological conditions for each monitoring day. I recommend using a consistent definition of PC2 throughout the paper. Describing it solely as “secondary aerosols” in certain sections may be misleading to readers. In the discussion, it is unclear which specific months were affected by the COVID-19 lockdown. The manuscript states that lockdown began in mid-March 2020, but also mentions “mixed effects” beforehand without specifying the months involved. Specific comments are provided below. Abstract Line 21: Change the capital “I” in “Industrial” to lowercase. Line 22: Add standard deviations to the reported mean PM₂.₅ concentrations. Lines 25- 27: Make it clear that traffic emissions here represents non-exhaust emissions. The conclusion is not well supported by the data. The so-called persistent sources, especially the non-exhaust traffic emissions only contribute <1% to total PM2.5 in all seasons (Table 6). Introduction Lines 84–86: Add references to support the statement about previous studies—what are the “few studies” referred to here? Methods Study Site Provide more detail on surrounding roads: Are they fully paved, partially paved, or unpaved? Clarify the sources of biomass burning in the region: – Is it dominated by seasonal crop residue burning? – Biomass use for cooking? – Wood burning for heating? Ensure consistent formatting of PM₂.₅ (use subscript for “2.5” throughout; e.g., lines 122, 127). Line 120: Add the number of samples collected in each season. Line 167: Correct to “analyzed”. Results / Discussion Line 187 (Table 2): Include standard deviations and medians for each variable measured in each season. Why does the Dry 1 period have the lowest average concentration? Please discuss. Figure 3: – Mark rainy days or indicate the average rainfall on monitoring days, if any. – Clarify the x-axis: include monitoring dates. – Explain the smoothing method used for PM₂.₅ (e.g., CMA) and state the window size. Line 255 (Table 5): In PC2, also include “mixed combustion”. Line 262: Correct “PC” to “OC”. Line 283: Table 6 is not cited in the text; please reference it. Line 306: The effect of rainfall is not visible in the data. Need to mark dates in the figure 3. Additionally, the impact of the lockdown is not apparent in the PM₂.₅ concentrations around mid-March 2020, mainly because the dates are not mentioned in the Figure 3. Reviewer #2: General Comments The manuscript titled ‘Chemical Composition, Seasonal Variability, and Source Identification of PM2.5 at an Urban Background Site in Medellín—Colombia’ explores the chemical composition and sources of PM in the city. The research is interesting and provides valuable insights. However, I think the manuscript needs improvements. Please check my comments below • Section: 2.3 what is the error/uncertainty in the quantification of metals and ions • Methodology section needs improvement in terms of what steps followed for quantification? What techniques used? What reagents used? This information will be helpful for readers to understand the research • In table.2 please provide the SD along with mean. Also include the mean and SD of all the quantified chemical species • PC5. Cl is also released from waste burning/mixed waste burning etc. How can you surely report it as Industrial emissions? • I recommend authors to collect satellite VIIRS derived fire data and plot for the region around the city for the study period to show how many fire spots occur? • It would be better if air mass back trajectories to the site is made and presented for the study period? May be concentration weighted trajectories? • Provide some data on number of construction buildings in the city per year. • Provide data of traffic vehicular count in the city Reviewer #3: The manuscript entitled “Chemical Composition, Seasonal Variability, and Source Identification of PM2.5 at an Urban Background Site in Medellín – Colombia” analysed a year-long concentration of PM2.5 and its sources in Colombia. Even though the manuscript is written in a proper manner, it requires some significant changes that need to be implemented before publication. So a major revision is required to improve the quality. The General and specific comments are attached in seperate sheet. ********** -->6. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #1: No Reviewer #2: Yes: vignesh prabhu Reviewer #3: No ********** [NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.] To ensure your figures meet our technical requirements, please review our figure guidelines: https://journals.plos.org/plosone/s/figures You may also use PLOS’s free figure tool, NAAS, to help you prepare publication quality figures: https://journals.plos.org/plosone/s/figures#loc-tools-for-figure-preparation. NAAS will assess whether your figures meet our technical requirements by comparing each figure against our figure specifications. Submitted filename: Reviewer3-PONE-D-25-58360.pdf 7 Apr 2026 Dear Editor and Reviewers, Thank you very much for the opportunity to revise our manuscript. We would like to express our sincere gratitude to the reviewers for their insightful comments and constructive suggestions, which have significantly helped us improve the quality and clarity of our work. We have carefully addressed each of the points raised. In the following pages, we provide a point-by-point response to the reviewers' comments. For clarity, the reviewers' comments are presented in bold, followed by our detailed responses. Changes made in the revised manuscript have been highlighted to facilitate the review process (see track changes document). General comments on the requested corrections: Although the previous study "Characteristic chemical profile of PM2.5 particles: a comparative study between two periods. Case study in Medellín, Colombia" https://doi.org/10.3390/su17125380 contains a station contemplated in the present investigation, the previous one corresponds to the estimation of the characteristic profile of PM2.5 particles in two periods in different areas of the Aburrá Valley and nearby. In this study, the focus was on comparing the chemical compositions and the changes found between periods. The focus of the present investigation goes far beyond a temporal comparison, since several key aspects are analyzed, which we will now discuss: the analysis of climatic variability, in which the typical wet and dry periods are evaluated, as well as the biannual precipitation of the city of Medellín. This analysis is further detailed in the paper, since precipitation data were obtained from a meteorological station belonging to the main meteorological data entity of the country. This station is located one kilometer away from the point where the air quality station where PM2.5 samples were taken is located. Another important difference is the receiver model analysis (in this case, principal component analysis), which detected emission sources supported by multivariate statistics and the typical correlations between pollutants that are tracers of specific sources. Another important difference lies in the analysis of hot spots and back trajectories. Regarding Kinetics of UO2 dissolution under highly alkaline conditions: Application of a thin film continuous flow-through reactor (https://upcommons.upc.edu/server/api/core/bitstreams/914956f5-d608-4414-a995-c1661105f8e2/content), we understand that there may be similarities, especially in the methodological part; however, this is because the methods are standardized and usually the same steps and descriptions are used to describe the procedures. In this case, we have made sure to improve the methodological section. We do not wish to manifest changes in our sponsors or upload our procedures to protocols.io, as we have employed standardized methodologies widely used worldwide for the chemical analyses we have performed. We have also checked that all sources in both the preliminary and current versions of the document are correctly referenced, thus acknowledging the work of the scientific community around our topic of study. We have added all the key documents for the preparation of the study in a ZIP folder, where a Jupyter notebook, programmed in Python, with the databases and algorithms that allow us to obtain the figures and data presented, is found as a fundamental input (Sup. File 1.zip). For this reason, we consider that our document contains all the information necessary for a scientist to replicate our findings. However, if someone wishes to request more information about the study, we offer the possibility of sharing more information upon formal request. We reserve the right of reply, as we leave all replication data available. We emphasize in this section that our study did not include sensitive information involving restrictions due to ethical and/or legal reasons. With respect to figure 1, we have made changes in it to use images taken from free and open repositories, where it is not necessary to request licenses for use, since they work under the CC BY 4.0 license. To maintain consistency with the new graphic resources, we have updated figures 2 and 2b: the first one becomes figure 3 and we have omitted the second one, since with the new resources added it could be redundant. This resource can be found in our supplementary material. With this, we improved the graphic quality of the paper, as requested by the journal editor. We have removed all figures from the final document and attached them in TIFF format in the document upload platform. In the present study we have not found any suggestions for citations by the reviewers. We have added more information on permits obtained to work at the study site. Response to Reviewer 1: We have corrected the spot changes suggested by the reviewer regarding syntax and added the standard deviations to the pollutant concentrations for the overall period and for each of the periods. We have expanded the discussion of traffic emissions relative to internal city emissions and reported emissions per ton per year for this source. We have eliminated the table in which we presented the contribution of the component (PC) to the total mass of the pollutant, as the rigor of these calculations did not meet the requirements of the journal. We have contrasted this source information with the social and environmental characteristics that appear in this new version. In the introduction section, the reviewer states that the information is based on few previous studies. We refer to the fact that it is complex to find studies that quantify the relationships between pollutants and climate variables. For this reason, we do not make references, since this idea is based on the bibliographic search carried out in the framework of this research. To correct this ambiguity, we have changed the wording to make it clear what we are referring to. In the methodological section, we have added information on the context surrounding the study site. In the discussion section, we have added more information on biomass burning and included an important part in the structure of the article consisting of hot spot analysis, supported with figures and back trajectory analysis. We leave for a future work the discretization of biomass sources, since in this paper we focus on what happens in the country and, more specifically, in the valley. We have placed Table 1 in the methodology section so that the discretization performed in the sampling and the number of samples taken in each of the periods are clearer. In the discussion section, more information on biomass burning has been added and an important part of the article consists of hot spot analysis, supported with figures and back trajectory analysis. We leave for future work the discretization of biomass sources, since things happen in the country and, more specifically, in the valley. We have placed Table 1 in the methodology section so that the discretization performed in the sampling and the number of samples taken in each of the periods are clearer. We have expanded the discussion of why dry period 1 had the lowest concentrations of material. Due to the nature of the new plots included, we have employed a new library of plots so that everyone's style is standardized and the document has better aesthetics. We have taken into account the reviewer's suggestions and have added the dates on the x-axes of each of the graphs that require it. As we have done with the biomass, we have added relevant and contrasted information on precipitation periods, which are taken by the main meteorological institute of Colombia and are at a station located two kilometers from the measuring station. Regarding the pandemic issue, we chose not to include this information, since our study period does not cover the confinement extensively. Although it is public knowledge that in the Aburrá Valley the concentrations of particulate matter were at medium-high levels during the confinement, we have considered the relevance of this topic in relation to our research and, for this reason, we have decided not to include this information. Response to Reviewer 2: We have also added information on the uncertainties in the quantification methods. We have expanded the methodological information on our quantification techniques; however, we consider that this aspect may become redundant, since we have employed standardized methods widely used in similar studies, so they are usually referenced and known by the community. In addition, we have left references for each of these methods, which consist of extensive documents where the particular procedures for each research need are clearly explained. We also emphasize that these procedures have been carried out by laboratories recognized nationally by the main environmental studies entity in Colombia, which are governed by clearly established technical norms and, in many cases, comply with the standards of U.S. and European agencies. We understand that the internal management of each IDEAM-accredited laboratory may contain confidential protocols, so it is not possible to accurately describe each procedure. However, we adhere to the standardized protocol reported by the laboratory for the handling, quantification and quality of the reported data. We have added standard deviation data for the major contaminants for each of the periods studied. We have collected FIRMS data (VIIRS J2) to contrast the hot spots of the Colombian region and the Aburrá valley, finding important characteristics that support the arguments made in the first version. Similarly, we have performed an analysis of back trajectories, which we have studied with Hysplit at critical dates. We have also provided information on the city's traffic density and annual emissions, as well as on the city's industrial emissions. Response to reviewer 3: 1. In many places, the authors used very generic statements that should be replaced with scientific terminology. This needs to be addressed throughout the manuscript. We have improved the content of the manuscript by improving the wording and using more technical terms throughout the document. 2. The flow of the introduction needs to be re-examined. A few statements contradict others within the introduction and need to be addressed. We do not consider there to be any contradictory ideas in the document; perhaps they were expressed incorrectly, which led the reviewer to reach this conclusion. We have worked hard to ensure that interpretations like this do not have a place in the current version of the document. 3. The introduction should explain how this study will be useful for further research by researchers or policymakers, and what new information it provides to existing scientific knowledge. This aspect has been addressed explicitly in the discussion and conclusions, as it is an important aspect, since it is one of the purposes of the study and of science in general. We have added a section to the introduction to make readers aware of the importance of our document. 4. Section 2.1 should include information on local sources such as industries and transport corridors that surround the study area. We have added more context about the area surrounding the study area. 5. Section 2.2 contains many abbreviations that need to be used consistently throughout the manuscript. We have reviewed the abbreviations and corrected them where necessary. 6. Sections 2.3.1 to 2.3.3 can be combined into a single paragraph mentioning the methodology and procedure followed. These can be referred to in previous studies conducted by the authors and mentioned here with a reference instead of explaining the procedure again. Other reviewers have requested a more detailed description of the methods, so we have decided to leave these sections as they were in the first version of the document. 7. The results section seems weak and could benefit from more rigorous scientific discussion. The authors should provide more analysis to illustrate the differences in concentration between the wet 1, wet 2, dry 1 and dry 2 seasons. Interannual changes. We have strengthened our results by supporting them with new information on hotspots, precipitation and back-trajectories in the study area, and expanded the discussion on what happens in each of the periods of our study. 8. The authors should investigate the different mean and sum concentrations mentioned in the manuscript. There are numerous mismatches in mean and sum values throughout the manuscript. Very important aspect highlighted by the reviewer. We appreciate the thorough review of the document. We have reanalyzed the information to avoid making this type of error. We have solved the inconsistencies and are working firmly on a single dataset, which is attached to the document and contains the information so that the experimentation can be replicated by anyone with basic knowledge of Python and R Studio. 9. Figures 2 and 3,4 are not properly labelled. Only the unit is written. What do they represent, e.g. mass concentration, and what is being counted? This needs to be updated. We have significantly improved the presentation of our graphs throughout the document. 10. The discussion sections need significant improvement. The section contains redundant sentences and the information is not discussed scientifically. We have worked hard to improve the language in our document, and we have discussed and supported the information with our analyses and the data reported by entities such as NOAA and NASA, as well as IDEAM. We have also contrasted the information with solid bibliographic references to widely referenced and published studies in recognised and cutting-edge journals in the field of research. Specific comments: 1. On line 32, the authors used generic statements instead of specific scientific terminology. For example, 'within cities' could be replaced with 'local sources'. This has been corrected. 2. Similarly, on line 33, 'emission generated miles away' was replaced with 'long-range transportation of sources'. We have corrected this. 3. On line 34, PM2.5 is referred to as 'aerosols'. In most cases, aerosols are referred to as two smaller particles. We have changed this. 4. Lines 41–42 remain as 'deposited'. We have corrected this. 5. Line 42. The sentence contradicts the previous statement. We do not consider the sentences to contradict each other; however, we have changed the wording so that the idea is clearer. 6. Lines 60 to 70 could be revised to provide basic information about the study area and the results of previous studies instead of CCN, since the impacts of CCN are more significant with particles in the smaller size range. We agree with the reviewer's observation, so we have removed the idea related to CCN. Throughout the introduction and discussion, references are made to studies conducted in Medellín and Colombia. We have not delved into this aspect for this specific section. 7. Lines 78 to 79 provide information on how the concentration increased over time in Medellín. We have discussed this in other sections of the document and do not consider it pertinent to include it in this specific section. 8. Line no. 95: Check one temperature unit. Correction made. 9. Lines 98 to 100 do not match the information provided in lines 180. Cross-check and correct. We have reviewed the additional information and verified its consistency. We have moved Table 1 to the Methodology section to make it more consistent with what we want to show. 10. If possible, replace Figure 1 with an image showing the surrounding Ares road network instead of the DEM map. We have replaced Figure 1 in accordance with the style of the journal and the reviewer's suggestions. 11. On line 115, the authors should clarify whether the filter papers were desiccated before and after the measurement to remove moisture. Moisture content plays a major role in the chemical composition of the collected sample. If not preserved properly, the composition of the measured pollutants will change. We have specified our procedures; however, we would like to emphasise that these procedures were carried out by a laboratory that follows standardised procedures issued by European and US environmental agencies, a Submitted filename: Rebuttal letter.pdf 12 May 2026 Chemical Composition, Seasonal Variability, and Source Identification of PM2.5 at an Urban Background Site in Medellín—Colombia PONE-D-25-58360R1 Dear Dr. Correa Ochoa, We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements. Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication. An invoice will be generated when your article is formally accepted. Please note, if your institution has a publishing partnership with PLOS and your article meets the relevant criteria, all or part of your publication costs will be covered. Please make sure your user information is up-to-date by logging into Editorial Manager at Editorial Manager® and clicking the ‘Update My Information' link at the top of the page. For questions related to billing, please contact billing support. If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org. Kind regards, Dipesh Rupakheti Academic Editor PLOS One Additional Editor Comments (optional): Reviewers' comments: Reviewer's Responses to Questions -->Comments to the Author 1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.--> Reviewer #1: All comments have been addressed Reviewer #2: All comments have been addressed Reviewer #3: All comments have been addressed ********** -->2. Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented. --> Reviewer #1: Yes Reviewer #2: Partly Reviewer #3: Yes ********** -->3. Has the statistical analysis been performed appropriately and rigorously? --> Reviewer #1: Yes Reviewer #2: Yes Reviewer #3: Yes ********** -->4. Have the authors made all data underlying the findings in their manuscript fully available? The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.--> Reviewer #1: Yes Reviewer #2: Yes Reviewer #3: Yes ********** -->5. Is the manuscript presented in an intelligible fashion and written in standard English? PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.--> Reviewer #1: Yes Reviewer #2: Yes Reviewer #3: Yes ********** -->6. Review Comments to the Author Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)--> Reviewer #1: (No Response) Reviewer #2: (No Response) Reviewer #3: The authors had put a significant effort in correcting the manuscript. Now the manuscript can be considered for publication ********** -->7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files. If you choose “no”, your identity will remain anonymous but your review may still be made public. Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.--> Reviewer #1: No Reviewer #2: Yes: vignesh prabhu Reviewer #3: No ********** PONE-D-25-58360R1 PLOS One Dear Dr. Correa-Ochoa, I'm pleased to inform you that your manuscript has been deemed suitable for publication in PLOS One. Congratulations! Your manuscript is now being handed over to our production team. At this stage, our production department will prepare your paper for publication. This includes ensuring the following: * All references, tables, and figures are properly cited * All relevant supporting information is included in the manuscript submission, * There are no issues that prevent the paper from being properly typeset You will receive further instructions from the production team, including instructions on how to review your proof when it is ready. Please keep in mind that we are working through a large volume of accepted articles, so please give us a few days to review your paper and let you know the next and final steps. Lastly, if your institution or institutions have a press office, please let them know about your upcoming paper now to help maximize its impact. If they'll be preparing press materials, please inform our press team within the next 48 hours. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org. You will receive an invoice from PLOS for your publication fee after your manuscript has reached the completed accept phase. If you receive an email requesting payment before acceptance or for any other service, this may be a phishing scheme. Learn how to identify phishing emails and protect your accounts at https://explore.plos.org/phishing. If we can help with anything else, please email us at customercare@plos.org. Thank you for submitting your work to PLOS ONE and supporting open access. Kind regards, PLOS ONE Editorial Office Staff on behalf of Dr. Dipesh Rupakheti Academic Editor PLOS One