Multiple photon field–induced topological states in bulk HgTe Authors: Dongbin Shin, I-Te Lu, Benshu Fan, Emil Viñas Boström, Hang Liu, Mark Kamper Svendsen, Simone Latini, Peizhe Tang, Angel Rubio Published: 2026 ABSTRACT Strong light-matter interactions can be exploited to modify properties of quantum materials both in and out of thermal equilibrium. Recent studies suggest that electromagnetic fields in photonic structures can hybridize with condensed matter systems, resulting in photon field–dressed collective quantum. Here, we show that photon fields in photonic structures, including optical cavities and waveguides, induce emergent topological phases in solids through polarization-mediated symmetry-breaking mechanisms. Using state-of-the-art quantum electrodynamic density functional theory calculations, we demonstrate that strong light-matter coupling can reconfigure both the electronic and ionic structures of HgTe, driving the system into Weyl, nodal-line, or topological insulator phases. These phases depend on the relative orientation of the sample in the coupling strength. In contrast with laser-driven phenomena, the photon field–induced symmetry breaking arises from steady-state photon-matter hybridization, enabling multiple robust topological states to emerge. Our study demonstrates that vacuum fluctuations in photonic structures can be used to engineer material properties and realize rich topological phenomena in quantum materials on demand. INTRODUCTION Light-matter interactions, induced by laser pulses and confined photon fields, have been highlighted as a tool for controlling the structural and electronic properties of quantum materials, resulting in the emergence of superconductivity, topological phase transition, and ferroelectric transition (1–9). Specifically, laser-induced metastable phenomena arise from diverse microscopic mechanisms, such as displacive excitations of coherent phonons via excited electronic structure, nonlinear phonon interactions, and Floquet dynamics (6, 10–19). For example, the Weyl semimetal (WSM) Td-WTe2 can be driven to undergo a topological phase transition into a trivial semimetal through a terahertz pump-induced shear distortion (10). In addition, a resonant terahertz pump can distort the lattice of the trivial semimetallic HgTe through nonlinear phononics, thereby triggering a transient topological phase transition into a WSM in its nonequilibrium (11). These studies indicate that the topology of materials can be controlled by laser pumps, showing great potential for light-controlled quantum devices (1, 6). However, these laser-induced phenomena face challenges in being used in optically controlled devices due to their nonequilibrium conditions characterized by short lifetimes (~ps) and heat dissipation (6, 10, 11, 14). Photon fields, which are confined in photonic structures such as Fabry-Pérot cavities, plasmonic cavities, and planar waveguides, exhibit quantum vacuum fluctuations and can modify material properties at equilibrium, deviating from their pristine behaviors (7, 20–29). For instance, a Fabry-Pérot cavity, comprising two mirrors that confine vacuum-fluctuating photons (see Fig. 1A), has been used to modify the charge density wave transition temperature in bulk 1T-TaS2 through strong coupling between the material and the vacuum photon field (7). In this setup, the coupling strength can be tuned by adjusting the mirror separation or their tilting angle. In addition, it is experimentally demonstrated that the vacuum-fluctuating photon field can modify the integer and fractional quantum Hall effect (30) and quench superconducting stiffness (8). A recent theoretical study suggests that a confined photon field inside a Fabry-Pérot cavity can induce a ferroelectric ground state in the quantum paraelectric SrTiO3 by forming a light-matter hybrid state. This process, driven by electromagnetic quantum fluctuations, is analogous to the mechanism of dynamical localization in driven systems (20). Similarly, it has been theoretically proposed that such cavity-induced effects can enhance the critical temperature (Tc) of phonon-mediated superconductors like MgB2 (9). These examples highlight the potential of engineered photon fields to generate photon-matter hybrid states through strong light-matter interactions. In particular, photons can be tailored to interact with various degrees of freedom in condensed matter systems, including electrons, spins, orbitals, and phonons, leading to modifications in properties such as magnetism, superconductivity, and lattice vibrations. Unlike the laser-induced phenomena out of equilibrium, photon fields in photonic structures modify material properties in the steady state of thermal equilibrium (7, 9, 20, 31–37). In addition to operating in the quantum fluctuation regime, optical cavities can also be used in the driven steady-state or thermal modes (i.e., with a nonzero photon number), offering the advantage of not requiring strong external driving due to photon confinement (31). Precise, stable, and long-lived control over material properties is required to operate optically controlled quantum devices, such as topological quantum computers, topological Josephson-junction circuits, and spin Hall effect devices (38–40). Also, material engineering via photon fields in photonic structures could provide a previously unexplored approach to achieve this goal. Photon field–induced topological phase transitions in HgTe via symmetry breaking. (A) Schematic image of strong coupling between matter and photons confined inside the optical cavity. (B) Various topological phase transitions from trivial semimetal HgTe depending on the photon polarization directions with optical cavity and planar waveguide with ionic distortion. In the bottom panels of (B), two-dimensional (2D) Brillouin zone band structures along the kx-ky plane with kx = ky = 0 centered at kz = 0 are prepared at various topological phases. In this study, we explore cavity-mediated topological phase transitions in bulk HgTe using state-of-the-art quantum electrodynamic density functional theory (QEDFT) calculations (9, 41, 42). We evaluate the modified electronic and ionic structures induced by photon fields in various kinds of photonic structures (see Fig. 1B) (7, 22, 24, 43). The trivial semimetal HgTe can undergo a series of topological phase transitions to a nodal-line semimetal (NLSM), a WSM, and a topological insulator (TI), depending on the light-matter coupling strength and the relative orientation between the crystal structure of HgTe and the polarization direction of the photon field. Unlike previous approaches for symmetry engineering in HgTe via external pressure (44) or nonlinear phononics (11), by choosing photon fields in a suitable photonic structure, we could selectively engineer electronic structures of HgTe with or without ionic distortions to induce symmetry breaking and topological phase transitions without additional carrier pumping. Our approach does not require resonance with the intrinsic photon frequency of the photonic structure. Thus, the predicted light-matter interaction effects are observable even under off-resonant conditions. Our study suggests a potential approach to realize photon field–controlled topological states in a photon-matter hybridized system. RESULTS Electronic and ionic structure of HgTe The pristine HgTe, in a zinc-blende structure, is a topologically trivial semimetal with a fourfold degenerate point between parabolic valence and conduction bands at the Fermi level (see middle panel of Fig. 1B). Constrained by its lattice symmetry, bulk HgTe belongs to the F4¯3m space group and allows 24 symmetry operations. Upon external perturbation, emergent topological phases are unraveled in HgTe (3, 11, 44, 45). For example, a CdTe/HgTe/CdTe quantum well structure with a sufficient thickness of HgTe was proposed and realized as the first quantum spin Hall insulator (3, 45). External pressure, by altering the intrinsic lattice of three-dimensional bulk HgTe, can induce topological phase transitions, resulting in either a WSM or a TI phase, depending on the direction of the applied pressure (44). These studies underscore the pivotal role of symmetry breaking in driving topological transitions in HgTe. In this work, we aim to achieve such symmetry breaking through a photon field embedded in a photonic structure. Using extensive QEDFT calculations, we propose a mechanism by which photon fields can induce topological phase transitions in HgTe. Nodal line phase induced by two photons in (001) plane We first consider HgTe coupled to the two polarizations of the fundamental cavity mode of a Fabry-Pérot type resonator, such that the electric field is parallel with the (001) plane of the HgTe cubic lattice (see Fig. 2A). With a given light-matter coupling strength (A0 = λ~/2ω~ = 0.0078 in atomic Hartree unit), defined as the ratio between the photon-matter interaction coefficient (λ~ in energy) and the frequency (ω~ in time−1) of dressed photon (46), we evaluate the photon-induced modification of the electronic structure and resulting atomic forces on each atom via the QEDFT approach (see Materials and Methods and the Supplementary Materials for details). In this configuration, photon fields change the electron charge density compared to its intrinsic ground state, leading to the formation of a new light-matter hybrid state. From the charge density difference ∆ρ(r) shown in Fig. 2B, we can observe the charge depletion around the (001) plane for Te atoms (green isosurface) and spherical charge accumulation for Hg atoms (yellow isosurface), indicating that photon fields parallel with the (001) plane can introduce an anisotropic charge redistribution, breaking the intrinsic crystal symmetry of HgTe. At the same time, our QEDFT calculation shows no net forces on each ion with this charge modification, indicating no change in the atomic structure of the HgTe in such a photonic structure. Figure 2 (C and D) shows the Fermi surface and calculated band structures of bulk HgTe modified by the photon fields. Instead of a fourfold degenerate point at the Fermi level, characteristic of intrinsic HgTe, two gapless nodal lines can be observed in the kx-ky plane with different momentum (±dz) along the kz direction. This suggests a topological phase transition, which is only contributed by the cavity-induced charge density modification and no ionic distortion. Notably, the values of the distance (dz) and the radius (dr) of nodal lines can be controlled via the light-matter coupling strength A0. As A0 is enhanced, dz and dr increase correspondingly (see Fig. 2E). This behavior indicates that bulk HgTe inside an optical cavity such that the (001) plane is parallel with the mirrors, becomes an NLSM, and its topological features can be efficiently modulated by the light-matter coupling strength. Topological NLSM phase in HgTe induced by two photons parallel with (001) plane. (A) Schematic image of Fabry-Pérot cavity mirrors parallel with (001) plane of cubic HgTe structure. (B) The modified charge density ∆ρ(r) of HgTe by two photons parallel with the (001) plane. ∆ρ(r) = ρQEDFTA0=0.0078(r)−ρDFT(r), in which ρQEDFTA0=0.0078(r) and ρDFT(r) are charge densities under photon fields with the light-matter coupling strength A0 = 0.0078 and without photon field. (C and D) Nodal lines in (C) Fermi surface plot and (D) 2D Brillouin zone band structures at kz = 0.029 Å−1. (E) Evolution of the radius of nodal line (dr) and distances (2dz) between nodal lines with respect to light-matter coupling strength A0. Blue dots and line stand for the radius of nodal line, and red dots and line stand for the distances between nodal lines between Weyl points. In (C), the purple and cyan surfaces indicate the hole and electron pockets. Inset of (E) indicates the nodal lines (pointed by green arrow) in the Fermi surface in the face-centered cubic first Brillouin zone. WSM phase induced by two photons in (11¯0) plane The topological behavior of HgTe can be further engineered by tuning the lattice orientation within the optical cavity, enabling simultaneous modifications to both ionic and electronic degrees of freedom. This allows the realization of a WSM phase in cavity-driven HgTe. Unlike the previous configuration, here, we rotate the HgTe crystal such that the (11¯0) plane is aligned parallel to the cavity mirrors (see Fig. 3A). In this configuration, the light-matter coupling also modifies the charge density (see Fig. 3B), resulting in a charge depletion at the Te atomic site on the (11¯0) plane and a spherical charge accumulation at the Hg atomic sites along the photon field direction. In contrast to the previous geometry, the charge redistribution on the Te atomic sites along (11¯0) plane introduces asymmetric interactions between upper Hg-Te bonds in the (11¯0) plane and bottom Hg-Te bonds in the (110) plane (see Fig. 3D). This asymmetry results in a nonzero net force on Hg and Te atoms and induces an ionic distortion (∆d) along the z direction correspondingly (see the blue arrows in Fig. 3D). Our QEDFT calculations confirm such observations and find that the space group of the relaxed HgTe structure becomes Imm2 (see Fig. 3E) with a lattice distortion, the value of which is directly proportional to the light-matter coupling strength (see blue line in Fig. 3C). WSM HgTe with two photons parallel with (11¯0) plane. (A) Schematic image of Fabry-Pérot cavity mirrors parallel with (11¯0) plane of cubic HgTe structure. (B) The modified charge density of HgTe by two photons aligned (11¯0) plane. (C) Modified bonding distance (Δd) and Weyl points distance (ΔkW) with respect to light-matter coupling strength (A0). Herein, Δd is defined as amplitude of atomic displacement from pristine geometry Δd = |x→τA0−x→τ0|. (D and E) The modified lattice distortion of HgTe by two photons aligned (11¯0) plane for (D) induced forces by modified charge density and (E) modified bonding distance. (F) Fermi arc surface state achieved by cavity-induced Weyl points with w1 = 0.049 Å−1 and w2 = −0.023 Å−1 values under the coupling strength A0 = 0.0078. In (A), (B), (D), and (E), orange planes indicate the (11¯0) plane. The inset of (B) shows the detached Te atoms and their charge depletion features along [001] and [11¯0] directions. The inset of (C) indicates the Fermi surface, while the purple and cyan surfaces indicate the hole and electron pockets. In (D), the yellow plane stands for the (110) plane, and the blue arrows indicate induced forces along the z direction by the modified charge density. In (E), the red dashed lines indicate the modified bonding distance between Hg and Te atoms. The modifications of the electronic and ionic structure discussed above can lead to the emergence of Weyl points around the Fermi level (see Fig. 3F). As shown in Fig. 3C, with increasing the light-matter coupling strength, the system hosts a trivial semimetal phase at the low strength limit and then becomes a WSM when 0.005 ≤ A0. In the latter phase, the distance between two Weyl points (∆kW = |kW1 − kW2|) increases with light-matter coupling strength as the ionic distortions increase (see Fig. 3C). Four Weyl points stay around the Fermi level within kz = 0 plane as (w1, w2, 0), (−w1, w2, 0), (w2, w1, 0), and (−w2, −w1, 0), and the Fermi arc states that connect them on the side surface are shown in Fig. 3F. To distinguish electronic and ionic contributions, we perform QEDFT calculations where we artificially fix atomic positions to those within the F4¯3m space group and take only the charge redistribution induced by the photon fields into account. HgTe in such a fixed geometry remains a trivial semimetal with the same photon field strength. This result indicates that the WSM phase in HgTe inside the cavity, with the (11¯0) plane parallel to the cavity mirrors, is truly nonperturbative as it originates from the lattice symmetry breaking and consequent structural rearrangement. The Supplementary Materials provides details on the electronic structure analysis for the various conditions, i.e., fixed geometry and light-matter coupling strength, for the case of two photon modes parallel with the (11¯0) plane. Topological insulating phase induced by single photons in [110] direction As a final configuration, we consider HgTe coupled to a single photonic mode with out-of-plane polarization aligned along the [110] direction of the crystal (see Fig. 4A). Such a mode can be hosted, for example, by a dielectric planar waveguide slab as a transverse magnetic (TM) mode or as a hyperbolic phonon-polariton mode. The latter, recently demonstrated in hexagonal boron nitride, enables extreme subdiffraction electromagnetic confinement and has even been shown to alter superconductivity (8, 22, 43). As the light-matter coupling strength increases in this out-of-plane setup, we observe multiple topological phases, including TI and WSM. Similar to the Fabry-Pérot cavity case, the photon field modifies the charge distribution, with noticeable depletion around Te atoms along the polarization direction (see Fig. 4B). Because of the redistribution of the charge density and minor ionic displacement, HgTe becomes a TI with a topological number of Z2 = 1 and a bandgap opening around the Γ point, when 0.0012 ≤ A0 ≤ 0.0027 (see Fig. 4C). For a coupling strength in the region of 0.0027 ≤ A0 ≤0.0033, a semimetal phase can be found, in which electronic states around the Γ point maintain topologically nontrivial properties while both electron pockets and hole pockets staying at different k points can be observed at the Fermi level (see fig. S4). Three-step topological phase transitions by a single photon polarized along the [110] direction. (A) Schematic image of HgTe geometry with a single photon along the [110] direction induced by the waveguide’s TM mode. (B) The modified charge density of HgTe by a single photon polarized along the [110] direction. (C) Modified bandgap (Egap) with respect to cavity coupling strength (A0). These regions with a green background stand for the semimetallic phase. The region with lower coupling strength (A0 < 0.0012) is topologically trivial, and the Z2 number is 1 for the phase with larger coupling strength (0.0012 ≤ A0 ≤ 0.0027). (D) Modified lattice distortion of HgTe by a single photon polarized along the [110] direction. (E) Modified bonding distance (Δd, blue) and Weyl points distance (ΔkW, red) with respect to coupling strength (A0). Blue dots and line stand for bonding distance, and red dots and line stand for the distance between Weyl points. (F) Fermi arc surface state on (001) side surface for the 1D photon field–driven HgTe with A0 = 0.0039. Hollow circles stand for four Weyl points. In (A), (B), and (D), red arrows indicate [110] direction. In (C) and (E), the green boxes indicate the trivial semimetallic phase region. Insets of (C) and (E), 2D Brillouin zone band structure at kz = 0.0 with A0 = 0.0027 and A0 = 0.0039, respectively. In (D), a green arrow indicates [11¯0] direction, and the blue arrows indicate induced forces along the z direction by the modified charge density. Upon further increase of the light-matter coupling strength (0.0033 ≤ A0), the contribution from lattice distortion becomes prominent and contributes further to the change of electronic structures. Under strong out-of-plane phonon fields, the charge depletion for Te atoms along [110] direction leads to asymmetric bonding configurations for the two Hg-Te bonds aligned with the [110] direction, resulting in a net force along the [001] direction and reducing the lattice symmetry to the Cm (8) space group (see Fig. 4D). The consequent large lattice distortion leads to the formation of four Weyl points around the Fermi level (see Fig. 4, D and E), whose projections on the (001) surface are connected by the Fermi arc states shown in Fig. 4F. We note that, in same light-matter coupling strength window (with 0.0033 ≤ A0), if we do not allow for structural relaxation keeping the pristine lattice structure (F4¯3m space group), the electronic charge modification alone does not alter the topological phase of HgTe (as TI) and only increases the bandgap (see fig. S3). This result indicates that the self-consistent cooperation between charge and lattice modifications, induced by a single photon field polarized along the [110] direction, is necessary to achieve the complex topological phase diagram in bulk HgTe. In the Supplementary Materials, we discuss further details of electronic structure analysis under various conditions, such as fixed geometry and different light-matter coupling strengths. These examples demonstrate how varying the orientation of bulk HgTe, strongly coupled to different photon modes, can produce a rich variety of complex topological phases. Table 1 summarizes multiple topological phases observed in bulk HgTe under different photon fields and crystal alignments. We found that two-photon modes aligned along the (111) plane induce Weyl points through ionic distortions (see fig. S2). In addition, a one-photon mode oriented along the [111] direction drives a two-step topological phase transition from a TI to a semimetal with Z2 = 1 (see fig. S5). These findings demonstrate that the photonic environment can induce symmetry breaking in materials through modifications of the electronic structure (47), the ionic structure, or both, enabling the emergence of multiple topological phases in bulk HgTe. Table 1.Cavity-induced topological phase transition from trivial semimetallic phase and the space group of the modified lattice from F4¯3 m depending on photon polarization direction.Photon directions[110][111](11¯0)(111)(001)# of ph. polarizations11222First phaseTITIWSMWSMNLSMInduced byElect.Elect.Elect. + ionicElect. + ionicElect.Second phaseSemimetalSemimetalInduced byElect. + ionicElect. + ionicThird phaseWSMInduced byElect. + ionicSpace groupImm2Cm (8)Imm2Cm (8)F4¯3m Cavity-induced topological phase transition from trivial semimetallic phase and the space group of the modified lattice from F4¯3 m depending on photon polarization direction. DISCUSSION Vacuum photon fluctuations–induced topological phase transitions are studied using state-of-the-art QEDFT calculations. We show that topological phases of bulk HgTe can be selectively controlled depending on the orientations of bulk HgTe relative to the polarization of photonic modes of an optical cavity and a waveguide of dielectric or hyperbolic type. The photon-matter interaction induces changes of the electronic charge density, in a process similar to the dynamical localization in driven systems (20), which in turn makes it possible to introduce ionic distortion and crystal symmetry breaking. As a result, the emergent topological phases in photon field–dressed HgTe can be selectively activated, depending on the photon field polarization directions and strengths. When the (001) plane of HgTe is parallel to the two polarizations of the mode of an optical cavity, the trivial semimetal HgTe becomes an NLSM via photon field–induced electronic charge rearrangement but without crystal structure changes. When, instead, the (11¯0) plane of HgTe is parallel with the two in-plane photon fields of the optical cavity, the topological phase transition to WSM follows from ionic distortion and related crystal symmetry breaking. Last, when a single-photon mode of a dielectric planar waveguide is coupled to HgTe along the [110] direction, the system displays a TI phase within a weak photon field–matter coupling regime, and a WSM phase under strong coupling, as a consequence of ionic distortions. The range of light-matter coupling strength (0.0 ≤ A0 ≤ 0.008) explored in our work is realistically achievable in hyperbolic photon-polariton or plasmon-polariton–based photonic structures in their ground states, even in the absence of real photons (dark cavity). For example, the surface phonon-polariton mode can provide a very strong light-matter coupling strength (up to A0 = 0.491) (9, 25, 26) by generating an electric-field strength of 1.4 MV/m at a frequency of 5 THz, measured 5 nm away from the surface. However, such strong couplings for the two-mirrored optical cavity configuration remain challenging to achieve by photon vacuum-fluctuation only. For example, a Fabry-Pérot cavity with 800-nm mirror distance provides coupling strength A0 = 0.636 × 10−3, which provides 136 kV/m E-field strength. This estimate indicates that vacuum-fluctuating photons inside a Fabry-Perot cavity can only provide a viable platform for realizing cavity-induced nodal lines in HgTe. On the other hand, the pumped cavity can provide a much higher coupling strength. For example, a recent study on the cavity-induced charge density wave transition experiment used a Fabry-Pérot cavity with cavity finesse F = 3.5 (7). Considering that Ecav=EincF/π, the A0 = 0.01 can be achieved by Ecav = 2.138 MV/m with F = 3.5 and Einc = 0.645 MV/m pump laser (48–52). In addition, finite thermal photon occupation can enhance light-matter coupling. However, its experimental relevance is governed by the competition with thermal smearing and cavity dissipation at high temperatures. Furthermore, additional future studies that bridge theoretical models and experimental observations will be helpful to fully understand the feasibility of strong light-matter interaction of vacuum-fluctuating photon fields in different types of photonic environments (7, 31, 32, 53). In the Supplementary Materials, a detailed discussion of thermal effects is provided. Photon field–induced phenomena present a clear advantage over strain-induced or laser-driven approaches. By selecting the appropriate sample orientation and tuning the coupling strength within a photonic structure, multiple emergent topological states in bulk HgTe can be accessed and controlled under ambient conditions. In contrast, pressure-induced transitions require high or anisotropic pressures to drive HgTe into a topological phase (44), while laser-driven methods (11) produce only short-lived, nonequilibrium states that quickly succumb to irreversible heating, limiting their potential for device applications. Our study suggests that photon fields confined within optical cavities or waveguides offer a more robust and versatile platform for manipulating topology, with both geometry and coupling strength serving as effective tuning parameters. MATERIALS AND METHODS We used the custom-made QEDFT implementation within the Quantum Espresso package to evaluate the electronic structure, the ionic relaxation, and photon-matter interactions (9, 46, 54). A plane-wave basis up to 80 Ry was used to describe the Kohn-Sham (KS) wave functions, and spin-orbit coupling was included. The Perdew-Wang–type local density approximation functional is considered to describe the electron-electron exchange and correlation effects (55). The core-level states were considered via the projector augmented wave method. We sampled the Brillouin zone with a 6 × 6 × 6 grid of points for the HgTe cubic superlattice with 4 Hg and 4 Te atoms and checked the k-point convergence up to 9 × 9 × 9 and the consistency in its primitive lattice. To investigate the topological properties of HgTe with the Wannier interpolation technique, we used Wannier90 and WannierTools packages (56, 57). Bloch states with 200 × 200 × 200 and 200 × 200 sampled grid points in the Brillouin zone were considered for finding the Fermi level and the Fermi arc surface plot, respectively. We analyze the topological phase of the photon-dressed electronic structure, where photon effects are effectively incorporated into the matter wave function. While topological invariants from full light-matter wave functions have been demonstrated in model Hamiltonians (58), extending this to ab initio calculations remains an open challenge. To study the effect of photon fields on electronic and ionic structures from first principles, we use the QEDFT framework based on the nonrelativistic Pauli-Fierz (PF) Hamiltonian (46) as followsHˆPF=HˆM+1cJpˆ·A~ˆ+∑α=1Mpℏω~α(a~ˆα†a~ˆα+12)(1)where HˆM is the matter Hamiltonian given byHˆM=−ℏ22me∑i=1Ne∇i2+∑i≠jNee24πϵ01∣r→i−r→j∣+∑i=1Nevext(r→i)(2) The terms represent the electronic kinetic energy, electron-electron Coulomb interaction, and the external potential vext(r→), arising from the nuclear Coulomb potential. The paramagnetic current operator is defined as Jˆp=∑i=1Ne(−iℏ∇i). The photon field is described via the creation and annihilation operators of addressed photons, a~ˆα† and a~ˆα, respectively. Note that the diamagnetic term is absorbed into the dressed photon frequency (ω~α). The corresponding vector potential operator isA~ˆ=c∑α=1Mpλ~α2ω~α(a~ˆα†+a~ˆα)ε~α(3)where c is the speed of light, λ~α is the light-matter coupling strength, and ε~α is the polarization vector of the α-th photon mode. Solving the full PF Hamiltonian is computationally challenging. Therefore, we apply the effective photon-free QEDFT approach to obtain the ground state properties of the electronic subsystem using an auxiliary KS scheme. The KS Hamiltonian readsHˆKS=−ℏ22me∇2+vKS(r→)(4)where the KS potential vKS(r→) comprises the external potential vext(r), the Hartree and electronic exchange-correlation potential vHxc(r→), and the photon-electron exchange-correlation potential vpxc(r→). For the latter, we adopt the electron-photon exchange approximation within the local density approximation (pxLDA) (47). The corresponding pxLDA potential is determined by solving the Poisson-like equation∇2vpxLDA(r→)=−∑α=1Mp2π2λ∼α′2ω∼α2(ε∼α·∇)23ρ(r→)8π23(5)where ρ(r) is the electron density in the unit cell and λ~α′ is the collective coupling. Last, the forces acting on nuclei are evaluated using the Hellmann-Feynman theorem. In our plane-wave basis code, for example, the forces from local potential, including electron-electron exchange correlation and photon-electron interaction, are Fτlocal=Ω∑G→ρ(G→)dVloc(G→)/dRτ, when G→ is the plane-wave wave vector and Vloc(r→) includes the electron-electron exchange and correlation potentials and the pxLDA potential. The connection between dressed and bare photon frequencies can be found in (9) and (46). Although a specific photon frequency ω~α is used, the strength of the photon field effect in the pxLDA approximation is largely governed by the ratio λ~α/ω~α if we consider one or two orthogonal effective photon modes with identical frequency and coupling strength. In our work, we denote the light-matter coupling strength λ~α/2ω~α as A0, which is comparable with the amplitude of the vector potential (A) of the photon field in the nonrelativistic PF Hamiltonian under the dipole approximation (∣A∣=cA0).