Three-Dimensional PNP–FEM of a Layered IPMC Artificial Skin Under Finger-like Sliding for Robotic Tactile Interfaces Authors: Montassar Aidi Sharif Published: 2026 ABSTRACT Robotic tactile interfaces involving artificial skins often experience sliding contact conditions. At sliding interfaces, frictional loading, tangential stress, and impending slip dominate sensing behavior. This work demonstrates three-dimensional finite element (3D-FE) and Poisson–Nernst–Planck (PNP) modeling of layered ionic polymer–metal composite (IPMC) artificial skin under finger-like reciprocating sliding contact. The layered structure consists of a Nafion-based IPMC core sandwiched between thin upper and lower electrodes. A rigid acrylic slider is used to simulate reciprocating finger motion relative to the surface of the IPMC skin. A time-dependent contact mechanics model is first utilized to simulate temporal variations in normal and tangential contact fields for various coefficients of friction. Electrochemical response is then determined in COMSOL Multiphysics by coupling ion transport and electrostatics in a PNP framework to predict the output sliding current. Parametric studies are used to investigate the dependence of sensor response on the coefficient of friction, reciprocating history, layer geometry, and transport parameters. From the results, it can be noted that the resulting parameter offers a robust and physically meaningful description of the magnitude of contact-induced shear stress under multi-mode loadings, yet retaining the capability of responding to the presence of friction-induced mechanical excitation. The current model is aimed at dynamic shear sensitivity detection in sliding contacts. It is not designed for texture discrimination or fragment identification tasks. Thus, the current study demonstrates an important coupling parameter for 3D IPMC sensor models under contact and sets up a framework for enhanced electro-chemo-mechanical modeling of soft ionic tactile sensors. 1. Introduction Robotic tactile interfaces and synthetic skins are increasingly essential for functioning in contact-intensive environments where sliding, tangential loading, and initial slip significantly affect sensing performance [1,2,3]. In robotic fingers, compliant grippers, and soft contact pads, tactile interaction transcends conventional indentation or bending; it frequently encompasses friction-induced contact, transient slip, and distributed interfacial shear [4,5,6]. An effective tactile material for robotic applications must be compliant, lightweight, and able to transform mechanically induced surface interactions into quantifiable electrical outputs under dynamic contact conditions [7]. Ionic polymer–metal composites (IPMCs) have garnered significant interest as a material platform for soft sensing due to their integration of mechanical flexibility and electromechanical transduction within a low-voltage soft structure [8,9,10]. An IPMC usually has an ionomer core, usually Nafion, between two conductive electrodes. This lets ions move around inside the hydrated polymer and turn into an electrical response [11,12,13]. Because of these traits, IPMCs have been looked into for use in soft robotics, biomimetics, flexible sensing, and smart systems that can do more than one thing [14,15,16,17]. Depending on the readout scheme and excitation mode, IPMC outputs in sensing mode are often reported as open-circuit voltage, short-circuit current, impedance variation, or self-sensing electrical response [18,19,20]. Transient current is especially useful for dynamic tactile events because it is directly related to the rate at which the charge on the electrodes changes over time. This means that it can show the start, development, and relaxation of mechanically induced ionic redistribution [18,20]. This makes current-based readout very useful for sliding tactile interaction, where sudden changes in contact state and tangential traction are the most important things to look at. Even though a lot of work has been done on IPMC actuation and sensing, most of the previous research on sensing has focused on strip or cantilever geometries that bend [21,22]. These studies have significantly elucidated electromechanical coupling, ionic migration, and transient response mechanisms [23,24,25,26]; however, they do not comprehensively represent the frictional and shear-dominated conditions experienced in robotic tactile interaction. In real-world robotic manipulation, finger-like structures often move back and forth across a surface that they touch, creating normal pressure, tangential traction, and sliding-induced interfacial effects that are more like tactile exploration and slip-related sensing than just bending alone [27,28,29]. This observation leads to the creation of IPMC modeling frameworks that clearly deal with sliding contact and friction that goes back and forth. From a physics perspective, IPMC behavior is typically explained by considering the hydrated ionomer as a charged medium with mobile counter-cations and fixed anionic groups [11,24]. In this framework, the electric field is controlled by electrostatics and ionic transport is described by migration–diffusion relations. This results in coupled Poisson–Nernst–Planck (PNP) formulations that can capture transient charge accumulation and relaxation across the polymer thickness [23,25,30,31]. Because these physics-based models connect material properties, geometric configuration, and transport parameters to quantifiable electrical outputs, they are especially appealing for simulation-driven design. While more sophisticated formulations might include poromechanical, steric, or multiphase effects [31,32], standard PNP modeling continues to be a physically significant and computationally feasible foundation for transient electrochemical sensing analysis. Simultaneously, realistic tactile interaction under sliding and frictional loading can be practically represented using finite element contact mechanics [33]. In addition to internal ionic transport, the evolution of contact pressure, tangential traction, friction level, and sliding history during surface interaction all influence the sensing response for layered artificial skin concepts. Therefore, a modeling approach that integrates electrochemical transport and time-dependent contact mechanics is ideal for examining how a soft ionic layer functions as an artificial skin under robotic touch. Additionally, this approach logically expands upon our earlier work. The current author and colleagues have previously studied omnidirectional tubular IPMC sensing [34], torsional IPMC sensing [35], bioinspired pressure-gradient sensing [36,37], and soft smart sensing for robotics applications [38]. These studies have created a more comprehensive foundation in soft sensor-oriented design and physics-based modeling. In contrast to those previous ideas, the current work focuses on a planar layered skin-like architecture under reciprocating sliding contact that resembles fingers. This is more in line with robotic tactile interfaces. Motivated by the above facts, this paper develops a novel methodology utilizing 3D finite element analysis and PNP equations for the purpose of modeling an IPMC skin layer experiencing reciprocating sliding action resembling a finger. The model includes a Nafion ionomer sandwiched between two thin layers of upper and lower electrodes. An acrylic slider is considered in order to represent the reciprocating action of a robot finger on the skin surface. First, the problem of mechanics is solved based on time-dependent contact mechanics, considering friction to calculate the change in the normal and shear interfacial fields at various friction coefficients. Second, the electrochemical problem is solved in the context of Nafion ionomer through a PNP modeling approach to calculate the generated current in the sliding motion. In the current paper, the suggested sensing function is mainly formulated as the dynamic shear-sensitive tactile sensor operating in the sliding contact regime, possibly applicable in the context of indicating imminent slip onset. Specifically, the model is developed for describing the process of transformation of the time-dependent tangential interaction and sliding status into electrical transients. At the current stage, the current approach is not designed to deal with problems such as texture recognition, piecewise estimation, and material property identification. The principal contributions of this study are as follows: (i) a finite element contact mechanics model for a multi-layered IPMC skin subject to cyclic touch–sliding–lift loading; (ii) a PNP-based electrochemical model induced by the externally applied shear stress field; and (iii) a friction-related parametric study elucidating the role of tangential conditions on transients in the tactile response. 2. Mathematical Modeling The following information gives a mathematical formulation to evaluate current flow through a layered ionic polymer–metal composite (IPMC) artificial skin under a repeated finger touch–slide–lift motion. The model employed has been developed through two sequential time-dependent analyses: The first analysis involved the solution of contact mechanics to find the shear and frictional deformation levels in each layered structure during the contact and sliding cycle. The second analysis provided the electrochemical response characterizing the Nafion core using a Poisson–Nernst–Planck (PNP) model of coupling. This overall formulation of our IPMC design was based on previously reported IPMC electromechanical and electrochemical modeling in the literature [11,23,24,25,35]. 2.1. Geometry, Domains, and Primary Fields The proposed artificial skin (AS) consists of a rectangular layer of IPMC structure formed by three united domains: a bottom electrode Ωb made of platinum, a Nafion-based ionomer core Ωn, and a top platinum electrode Ωt. These three united layers define the deformable IPMC sensor body(1)Ωm=Ωb∪Ωn∪Ωt.A rigid acrylic slider occupying domain Ωs is positioned above the top electrode and is used to emulate the cyclic motion of a robotic finger over the skin surface. Frictional contact is established only when the slider is in its lowered state and in contact with the upper face of the top electrode. The primary unknown fields are as follows:The mechanical displacement field u(x,t) and the corresponding stress field σ(x,t) in Study 1;The cation concentration c(x,t) and electric potential ϕ(x,t) in Study 2. The mechanical displacement field u(x,t) and the corresponding stress field σ(x,t) in Study 1; The mechanical displacement field u(x,t) and the corresponding stress field σ(x,t) in Study 1; The cation concentration c(x,t) and electric potential ϕ(x,t) in Study 2. The cation concentration c(x,t) and electric potential ϕ(x,t) in Study 2. All analyses are carried out in the time domain. 2.2. Step 1: Time-Dependent Contact Mechanics The IPMC sensor and the slider are modeled as nearly incompressible elastic solids, where the slider has prescribed translational motion. Under the quasi-static assumption adopted in the present work, the mechanical equilibrium equation in the deformable domains is written as follows:(2)∇·σ+b=0inΩm, where b denotes the body-force density. The infinitesimal strain tensor is defined as follows:(3)ε=12∇u+(∇u)T, and the constitutive relation is taken in linear elastic form,(4)σ=C:ε, where C is the elasticity tensor [24,25,33]. The mechanical model chosen for the current study is based on the small-strain continuum mechanics approach, which is commonly utilized in contact and deformation studies. For instance, the quasi-static equilibrium condition, infinitesimal strain measure, and linear elasticity assumption given in Equations (2)–(4) are not considered to be novel assumptions for this work, but rather are borrowed from the conventional theories of continuum mechanics and finite element-based contact modeling [33]. The unique feature of the current study is that rather than proposing novel kinematics and mechanical models, they are embedded into a layered IPMC touch–slide–lift sensing system. The interfaces among the bottom electrode, Nafion core, and top electrode are assumed to be perfectly bonded. The lower surface of the bottom electrode is fixed to represent the attachment of the artificial skin (AS) to a rigid support. The slider is constrained against rotation and undergoes only prescribed translational motion. Cyclic Touch–Slide–Lift Motion: Cyclic Touch–Slide–Lift Motion: Cyclic Touch–Slide–Lift Motion: To simulate a dynamic finger-like tactile scanning process, we define the slider motion as a periodic multi-stage cycle:Vertical downward motion—until it comes in contact;Horizontal sliding on the artificial skin;Vertical upward movement to break contact;Horizontal motion during return while not adhered to the surface. Vertical downward motion—until it comes in contact; Vertical downward motion—until it comes in contact; Horizontal sliding on the artificial skin; Horizontal sliding on the artificial skin; Vertical upward movement to break contact; Vertical upward movement to break contact; Horizontal motion during return while not adhered to the surface. Horizontal motion during return while not adhered to the surface. g0 denotes the initial gap between the slider and the top electrode, δp is a small preload displacement introduced to ensure stable contact, and s is the horizontal sliding stroke. Let tD, tS, tL, and tR denote the durations of touchdown, sliding, lifting, and return, respectively. The total cycle duration is(5)Tcyc=tD+tS+tL+tR. To describe periodic repetition, a local cycle time is introduced as follows:(6)τ=t−tTcycTcyc,0≤τ