Application of Logistic Regression and Random Forests to Assess the Relevance of Chrononutrition Information for Prediction of Overweight in Adults: Evidence from the INRAN-SCAI 2005-2006 Italian Nutrition Survey Authors: Karolina Bartoszek, Suzana Almoosawi, Luigi Palla Published: 2026 ABSTRACT Background/Objectives: Obesity represents a growing public health concern worldwide. Chrononutrition, a research field examining the timing and regularity of food intake, has been shown in animal models to influence body weight regulation and obesity-related outcomes. Previous research has also explored the association between chrononutrition information and BMI. Using INRAN-SCAI 2005/2006 adult nutrition data based on 3-day diet diaries (n = 2312), this study aims to assess whether chrononutritional information on the distribution of energy intake during the day is able to improve prediction of overweight status (BMI > 25 kg/m2), compared to information on energy from the whole day alone. Methods: This research investigates it using logistic regression and random forest models. For both types of models, three different specifications were compared: a model trained on the mean and irregularity of calorie intake over 3 days for 6 day-time intervals (MI6); a model trained on repeated measures over 3 days of calorie intake from the same 6 time intervals (RM); and a model trained on mean and irregularity of calorie intake over 3 days for the whole day (MID). The performance of the models was compared using risk prediction metrics and ROC curves. Results: When including additional demographic and behavioural predictors beside the energy variables, the results only showed a statistically significant difference in the performance of the logistic regression models if they were trained and tested on the same data. The models trained using chrononutrition information performed better, but the difference in diagnostic accuracy was very small (AUC = 0.7909 for MI6, p = 0.0086; 0.7923 for RM compared to 0.7850 for MID, p = 0.0072) and possibly attributable to overfitting, as it was no longer significant in the comparison within a testing set (70% training and 30% testing samples). For the random forest models, no significant difference was found. In the same models including only the energy variables, the improved performance of MI6 and RM was significantly better than for MID also in the test set (respectively, p = 0.0001 and p = 0.0002), and the gap in AUCs became substantial (AUC = 0.622 for MI6, 0.618 for RM and 0.507 for MID), indicating that socio-demographic and behavioural variables encapsulate information on energy intake by time of the day. Typical under-reporting bias present in nutritional epidemiology and the cross-sectional nature of the sample based on 3-day diaries may have affected these results, although use of diet diaries should minimize recall bias. Conclusions: In conclusion, the impact on health of timing and regularity of calorie intake in the day may act through other mechanisms than via overweight and may be captured by other demographic and behavioural variables; larger and prospective longitudinal studies are warranted to thoroughly investigate the added value of time-of-day information. 1. Introduction Despite recent advances in the treatment and management of overweight and obesity, including the introduction of effective pharmacotherapies such as GLP-1 receptor agonists and related incretin-based agents, overweight and obesity remain among the most prevalent and persistent public health challenges worldwide [1], with substantial negative impact on health-related quality of life [2]. Against this backdrop, understanding behavioural and lifestyle determinants of weight, particularly eating behaviours, remains critical for informing effective prevention and management strategies. Beyond dietary composition alone, observational evidence indicates that the timing, distribution, and regularity of energy intake across the day relate to adiposity and weight status [3,4,5,6,7]. This concept is central to the rapidly developing field of chrononutrition, which examines the interplay between meal timing, frequency, and regularity on the one hand, and metabolic outcomes on the other hand [8,9]. Interventions such as intermittent fasting and time-restricted eating utilise temporal modulation of food intake to influence appetite regulation, glucose metabolism, and energy balance [3,10], and may have implications in the development of dietary strategy to manage weight. Chrononutrition builds on the understanding that the human circadian system, an endogenous clock averaging just over 24 h and strongly influenced by light exposure, regulates numerous physiological and metabolic processes [3,11]. Consistent with this, both observational and experimental research indicates that late eating, irregular eating patterns, and prolonged eating windows are associated with higher BMI and adverse metabolic outcomes [5,6,7,8,9,12,13]. Circadian physiology also suggests that identical meals consumed at different times of day can lead to divergent metabolic responses due to phase-dependent physiology [14]. Moreover, molecular research demonstrates that feeding rhythms interact with circadian clocks to regulate metabolic pathways, providing plausible mechanisms for these time-of-day effects [3,15]. Additional studies further show that meal timing, distribution across the day, and day-to-day regularity are associated with BMI and weight-related outcomes [5,6,12]. So far the published literature on chrononutrition has largely investigated associations that highlight potential causal relationships between eating behaviour/dietary habits and overweight/obesity underpinned by the biological mechanisms described earlier;however to our knowledge, no study to date has evaluated whether detailed chrononutrition-related information, including meal distribution and regularity across days provides added predictive value for determining an individual’s overweight or obesity status beyond total daily energy intake alone, with or without inclusion of socio-demographic or behavioural predictors. The data used to conduct our study are provided by a national nutritional survey, namely, the INRAI-SCAI 2005-06. This cross-sectional survey was conducted through repeated food intake diaries, collected over three consecutive days on a representative sample of the Italian population [16]. The objective of this study is to assess the relevance and impact of chrononutrition information contained in diet diaries, a dietary assessment tool that records the time of intake, for predicting overweight status, using classic logistic regression models and more complex machine learning random forest models. The performance of both of them was assessed using receiver operating characteristic (ROC) curves and classification metrics, including specificity, sensitivity, positive predictive value (PPV), negative predictive value (NPV), and misclassification rate. 2. Materials and Methods 2.1. Study Design The data used in this study were derived from the Italian National Consumption Survey INRAN-SCAI 2005-06 [16]. The survey examined 1300 randomly selected households, from geographical sections of the Italian territory. The survey had 3323 subjects in total; for the analysis in this study, only the data on adults (age 18 to 64 inclusive) were used (n = 2313). For the analysis carried out in this study, one unit, which had missing BMI, was removed (final n = 2312). The survey consisted of self-reported (by the participants) food consumption diary for 3 consecutive days [16]. In addition, socio-demographic data of the participants were collected, such as sex, Italian area of residence, education level, profession, and employment status. The survey also contained questions about lifestyle, including alcohol intake, smoking, whether they regularly eat breakfast, means of transportation they use, hours spent on sports during the week, and number of hours during the day in which they practice some kind of physical activity. Further details on the survey can be found in the article by C. Leclercq et al. (2009) [16]. The energy intake data from the survey was divided into 6 time slots, according to the timing of the three main meals in Italy and the intervals between those meals [2]. The resulting time frames were 6 a.m.–9 a.m., 9 a.m.–12 p.m., 12 p.m.–3 p.m., 3 p.m.–7 p.m., 7 p.m.–10 p.m., and 10 p.m.–6 a.m. The irregularities of the 6 time intervals were based on the ones calculated by Palla and Lopez Sanchez (2023) [2], as well as the irregularity index for the whole day, using the following formula [17].Irregularity=100×∑|xi−x¯|3×x¯ 2.2. Types of Models and Validation Approaches This study made use of two predictive methods, namely, logistic regression and random forests, to predict whether a subject is overweight. The models were made to predict overweight, rather than obesity, because the number of obesity cases was relatively low—only 176 (7.6% of adults) cases observed—compared to 809 (35% of adults) cases of overweight. For both of these methods, models for 3 different sets of energy data were generated: (1) where means and irregularity (across the 3 days of the survey) of the 6 time slots were included in the models (MI6, resulting in 12 chrononutritional predictors); (2) where repeated measures of energy intake, across the 3 days were used as predictors in the models again for all 6 time slots (RM, resulting in 18 chrononutritional predictors); (3) where a whole day mean and irregularity of energy intake across the 3 days were considered in the model as predictor, i.e., without partitioning into time slots (MID resulting in 2 nutritional predictors). The logistic regression models tested the performance of the 3 types of model described above (a) by training the models on 100% of the data sample and testing the model on the same complete sample; (b) by training the models on 70% (chosen at random) of the data sample and testing them on the remaining 30% of the data sample; (c) by applying 10-fold cross-validation. 2.3. Variable Selection The non-energy (i.e., socio-demographic and behavioural) variables for the logistic regression models were derived by stepwise forward selection, using the “step” function in R version 4.4.2 [18] by R foundation (Vienna, Austria). The optimal variables for all three conditions were chosen to minimize the AIC value of the models. The final set of variables was the union of the variables that were optimal for either of the three individual models. The variables that ended up being included in the model were hours of sport per week, age, sex, marital status, smoking status, the administrative region, use of dietary supplements, following a special diet, having been on a restrictive diet in the past year, and the level of education. Additional recorded variables, not selected through forward stepwise selection for any of the models, were area type (rural/urban), alcohol drinking, eating breakfast, the duration of following a special diet, consumption of fortified products, sedentary hours in a day, employment status, profession, hours of sport training during the week, hours of light physical activity (e.g., walking cleaning) daily, and the geographical area of Italy (North-East, North-West, Centre, and South/Islands). As stepwise forward selection may increase type 1 error/lead to overfitting, we also explored variable selection by the “lasso logit” function in Stata 18 by StataCorp (College Station, TX, USA), which led to the inclusion of all socio-demographic/lifestyle predictors in the survey, i.e., the default approach taken also for random forests models. 2.4. Discriminatory Accuracy Comparisons Across Models The performance of the resulting model was checked with the “performance” library in R version 4.4.2 [19], which granted the following: posterior predictive check, collinearity check, and search for influential observations. After the variables were chosen and the performance check did not show any major issues, the models (1–3) were fitted using all 3 variations of training and testing methods (a–c). For each of the training and testing methods, models (1–3) were compared on their specificity, sensitivity, negative predictive value (NPV), positive predictive value (PPV)and misclassification rate. For each of these models, two probability cut-off points were chosen to classify whether the subject was overweight or not. One was simply the midpoint p = 0.5, and the second one was the optimal cutoff point, which jointly maximized specificity and sensitivity computed using the Youden index and implemented via the “cutpt” module in Stata [20]. For all of the models, except the cross-validated ones, ROC curves were generated and the model types compared in pairs, using the “roccomp” command in Stata [21]. The ROC curves for the cross-validated models were obtained using the “cvauroc” command [22], from which the cross-validated logistic models themselves were also generated. 2.5. Random Forests Model Specification and Comparisons The random forest models were generated using the “rforest” plugin in Stata [23]. The models were built on 500 trees, and the number of variables to investigate at each split was set to the square root of the number of independent variables for each model. The depth of the forest was left unlimited, and the minimum number of observations to include at each leaf was set to 1, which allowed for overfitting when the models were tested on the same data they were trained on. Hence, they were trained on 70% (chosen at random) and tested on the remaining 30% of the data. The variables included were all those available in the survey due to the non-parametric nature of random forests, which overcomes the estimation issues linked to having a large number of predictors. The models were compared on the same metrics as the logistic regression models: specificity, sensitivity, NPV, PPV and error rate, at two cutoff points one being 0.5 and the second one an optimal cutoff point calculated using the Youden index with the “cutpt” module for Stata [20]. The ROC curves for the 3 types of model were also compared, in pairs, using the “roccomp” command from Stata [21]. Variable importance indices were also calculated. Finally, to better understand and interpret the findings, we also repeated the comparison of the predictive models 1–3 with the same methodology, but based on energy intake predictors only, for both logistic and random forest models. 3. Results 3.1. Results from the Logistic Regression Models 3.1.1. Logistic Regression Models Trained and Tested on 100% of the Data Sample The optimal cutoff points (Table 1) for the logistic regression models trained and tested on 100% of the data sample were the following: 0.29 for MI6; 0.35 for MID; and 0.36 for RM. For the 0.5 cutoff point (Table 2), the model with repeated measures in 6 time intervals (RM) obtained the best classification metrics, the MI6 model followed, and the MID model, which did not consider chrononutrition information, performed the worst. Despite being consistent across metrics, all of the differences were very small (around 1%). At the optimal cutoff point, RM also performed the best, except for sensitivity, which was the lowest out of the three models (70.6% for RM, 80.7% for MI6, 71.1% for MID), and NPV, which was again the highest for MI6 (86.3% compared to 82.5% for both MID and RM). The 0.5 cutoff point worsened sensitivity and NPV, while improving specificity and PPV, meaning that the models became very accurate at identifying the healthy BMI individuals (non-overweight). The sensitivity at the 0.5 cutoff point, however, was low at 51.0% for MID, 51.7% for MI6, and 52.7% for RM, indicating that the models failed to identify nearly half of overweight cases. When it comes to the models at the optimal cutoff point, all of the classification metrics were at a satisfying level, except for PPV, which was 53.4% for MID, 56.3% for MI6, and 57.1% for RM, which means a large proportion of the cases classified as overweight had normal weight in reality. Sensitivity was much higher than for the 0.5 cutoff point, above 70% for all of the three models (Figure 1), while specificity lowered to an acceptable level, reflecting the classic trade-off between specificity and sensitivity. The optimal cutoff point for the MI6 model was much lower than for the other two, which might be why all of its classification metrics scored either the lowest or the highest, always standing out amongst the other two models. On the pairwise comparisons of the ROC curves for logistic regression models (Figure 1), trained and tested on 100% of the data sample, it is visible that the ROC curves of the models considering 6 time intervals (MI6 and RM) slightly diverge from the ROC curve of the mean and irregularity of the whole day intake (MID). The test of the hypothesis that the area under MI6 ROC (with AUC = 0.7909) and the area under MID ROC (with AUC = 0.7850) are equal, returned a p-value of 0.0086 (Table A1), which makes the difference between them highly statistically significant despite the small difference. Similarly, the comparison of the ROC curve for RM (AUC = 0.7923) and for MID returned a p-value of 0.0072, which makes the difference between them significant as well (Table A2). Between the ROC curves of MI6 and RM, there was no significant difference (Table A3). All of the p-values for pairwise comparisons of the ROC curves are displayed in Appendix A. The AUCs of all of the conditions were above 0.75, which means that the models predicted overweight significantly better than at random, which would result in an AUC of 0.5. They also performed better than models, which did not consider any demographic and behavioural variables beside the energy-related ones, which had AUCs of 0.6146 for RM, 0.6115 for MI6, and 0.5259 for MID. 3.1.2. Logistic Regression Models Trained on 70% and Tested on the Remaining 30% of the Data Sample After randomly dividing the dataset into a training set and a testing set, the classification metrics computed on the test sample scored visibly lower. The optimal cutoff points in this case were 0.33 for MI6, 0.29 for MID, and 0.32 for RM. The sensitivity at the 0.5 cutoff point (Table 3), which was already low when training and testing at 100% of the data sample, became even lower. It was 45.2% for RM, 44.0% for MI6, and 44.4% for MID, which means more than half of overweight cases were missed. At the 0.5 cutoff point, the RM model performed the best across all of the classification metrics, MID came after it, and MI6 performed the worst; however, the differences were small. The MID model performed best with respect to sensitivity and NPV for the optimal cutoff point (Table 4), but had the highest error rate (31.3% compared to 29.8% for both MI6 and RM). The areas and ROC were no longer statistically significantly different. In particular, the condition considering the mean and irregularity of the whole day even had the largest AUC (AUC = 0.7437 for MI6, AUC = 0.7496 for RM, AUC = 0.7515 for MID, Figure 2); however, the differences were small and not significantly different for any of the comparisons (p-value = 0.1464 for comparison of MID with MI6, as seen in Table A4, and p-value = 0.7489 for comparison of MID with RM, as seen in Table A5, and p-value of 0.1989 for comparison between MI6 and RM, as seen in Table A6). 3.1.3. Cross-Validated Logistic Regression Models The 10-fold cross-validated mean AUCs of the MI6 and RM considering chrononutrition information were virtually the same as the mean and irregularity of the whole day MID (mean AUC of 0.763 for RM, 0.764 for MI6 compared to 0.761 for MID). In particular, their 95% confidence intervals were overlapping (Table A10, Table A11 and Table A12). However, the repeated measures model (RM) had a mean standard deviation much lower than the other models (0.016 for RM; 0.030 for MI6; 0.028 for MID) (Figure 3). This suggests that providing the specific amount of energy consumed daily in the 6 time intervals produces a more stable model compared to the models that considered only the average of food intake across 3 days, whether with or without the partition by time of the day. The logistic regression results based on inclusion of all socio-demographic variables were numerically and substantively very similar to the ones obtained by stepwise forward regression. 3.2. Random Forest Models The classification metrics for the random forest models performed most similarly to the classification metrics of the logistic regression models trained, like RFs, on 70% and tested on 30% of the data sample. None of the three models had a superior performance across all metrics. At the 0.5 cutoff point, the sensitivity for MID was much higher than for the other two models (46.6% for MID comparing to 38.6% for MI6 and 39% for RM) (Table 5). MID also performed better when it comes to NPV (75.6%); however, in this case, the difference was not as large (MI6 scored 73.2% and RM scored 73.6%). Sensitivity scores were particularly low at the 0.5 cutoff point; more than half of overweight participants were not identified by the models, as a lot of false negatives were generated. At the 0.5 cutoff, specificity was higher for the models, which considered 6 time intervals, compared to the one considering the day as a whole; however, it was high for all three models, which means they all correctly identified the vast majority of subjects who were not overweight. PPV was also better for the models using time intervals (Table 5). The differences in the classification metrics for the two models considering time intervals were generally very small at the 0.5 cutoff; only for PPV was the difference a bit larger (63.0% for RM and 60.7% for MI6). At the optimal cutoff point, which was p = 0.363 for RM, p = 0.391 for MI6, and p = 0.360, the metrics were similar for MID and RM; MI6 differed more from them and had the best error rate performance (Table 6). The sensitivity generally improved at the optimal cutoff point; the RM model scored the highest in this case (71.2% compared to 69.1% for MID and 64.0% for MI6). The specificity for MI6 was 75.6%, followed by MID (69.2%) and RM (68.6%). The values for PPV and NPV were more similar, with difference lower than 4% between any of the models (Table 6). When it comes to the ROC curves of random forest models, they were all similar. The MI6 model had the highest AUC = 0.7544, followed by RM and MID models, which both had an AUC of 0.7481. None of the pairwise comparisons (Figure 4) showed a significant difference(p-value = 0.511 for MI6 and MID; 0.997 for RM and MID; 0.425 for RM and MI6 comparison), and their 95% confidence intervals were overlapping (Table A7, Table A8 and Table A9). Hence, including the intake data from the 6 time intervals did not change the discriminatory accuracy of the models, which is consistent with the finding for the 30% test set obtained by logistic regression. The random forest results also come with a ranking of variable importance [23], from which it appeared that some variables consistently featured highly (Table A25, Table A26 and Table A27) across all models. In particular, the energy variables had the highest importance for all three conditions. Except for the energy variables, those which always had relatively high importance were administrative region, the type of area (urban/rural), age, and the geographical area of Italy. For RM and MI6, the energy variables, containing information about energy intake earlier in the day, had the highest importance. 3.3. Comparing Models Including Only Energy Variables To gain more insight in the relevance of chrononutrition information for predictive models, which overall showed a somewhat superior performance for RM, we also evaluated the added value of stratification of energy intake by time of day after removing the influence of the socio-demographic and behavioural predictors, i.e., comparing the three prediction models purely based on energy intake variables. When using the 100% sample for training and testing, AUC = 0.615 for RM, AUC = 0.612 for MI6, and AUC = 0.526 for MID (p ≤ 0.001 for comparison test between MID and either RM or MI6, and no significant difference between RM and MI6 model with p = 0.657) (Table A13, Table A14 and Table A15). This statistical comparison remained qualitatively unchanged when training on 70% and testing on 30% of the sample, with AUC = 0.618 for RM, AUC = 0.622 for MI6, and AUC = 0.507 for MID (p ≤ 0.001 for comparison test between MID and either RM or MI6, and no significant difference between RM and MI6 model with p = 0.774) (Table A16, Table A17 and Table A18). Again, when using only energy variables, 10-fold cross-validated logistic regression led to consistent results, in that the average AUC = 0.594 for RM, AUC = 0.597 for MI6, and AUC = 0.523 for MID, with non-overlapping confidence intervals between MID and either RM or MI6 models, which in turn were completely overlapped (Table A22, Table A23 and Table A24). Finally, the random forest models also showed superior results of the models with chrononutrition information with AUC = 0.5873 for RM, AUC = 0.5880 for MI6, and AUC = 0.5020 for MID with significant differences between RM and MID (p-value of 0.0050), as well as MI6 and MID (p-value of 0.0049) (Table A19 and Table A20). There was no significant difference between RM and MI6 (p-value of 0.9720) (Table A21). 4. Discussion The primary finding of this study was that the inclusion of chrononutrition variables in both logistic regression and random forest models did not result in a statistically or clinically meaningful improvement in the discriminatory accuracy for overweight status beyond that achieved using total daily energy intake. This was observed despite a modestly superior performance of models incorporating repeated dietary measures over three days. Importantly, this conclusion concerned the models that were adjusted for socio-demographic factors, such as age and sex, as well as behavioural predictors, including physical activity and other lifestyle variables. In contrast, when overweight prediction relied exclusively on dietary information, there was a substantial improvement in discriminatory accuracy across chrononutritional-modelling approaches compared to using just total energy intake over the day. Taken together, these findings suggest that certain socio-demographic and behavioural characteristics may inadvertently capture information related to temporal patterns of eating, thereby diminishing the apparent added value of explicit chrononutrition variables when such covariates are included. However, in the absence of some of these covariates, the additional information provided by timing of energy intake—whether derived from multiple diary days analysed separately or summarised using average intake and irregularity indices—significantly enhanced the discriminatory accuracy for overweight status. Within the context of observational research, disentangling the physiological effects of circadian regulation from behavioural patterns of eating remains inherently challenging. Indeed, both the timing of eating [24,25,26,27] and markers of circadian disruption [28,29] have been consistently associated with overweight and obesity, yet distinguishing their independent contributions in observational settings is difficult, as eating behaviour is closely intertwined with social, behavioural, and lifestyle factors. This complexity provides an important lens through which to interpret the present findings, in which chrononutrition variables did not meaningfully improve model discrimination once socio-demographic and behavioural covariates were included. Experimental work offers critical insight into these mechanisms. Using a forced desynchrony protocol to separate endogenous circadian regulation from behavioural influences related to time awake and fasting–feeding schedules, Barker and colleagues demonstrated that caloric intake in adolescents is governed by two distinct yet interacting processes: intrinsic circadian control and behavioural regulation linked to the waking cycle [30]. Under tightly controlled conditions, the endogenous circadian system exerted a robust influence on energy intake, favouring greater consumption during the late circadian afternoon and reduced intake during the circadian morning, independent of meal timing, fasting duration, or environmental cues. In parallel, behavioural factors exerted an independent effect, with higher intake earlier after awakening and a progressive decline across the waking episode. Importantly, adolescents with overweight or obesity exhibited both a delayed and attenuated circadian rhythm of caloric intake and a flatter distribution of intake across the waking day, despite preserved central circadian timing as assessed by melatonin. This pattern suggests that excess weight in youth may be associated not with overt disruption of the circadian clock itself, but rather with diminished circadian control over eating behaviour and increased influence of non-circadian drivers, which may weaken temporal constraints on eating and promote later, more evenly distributed caloric intake linked to adverse metabolic outcomes. Barker and colleagues further provided a quantitative comparison of the relative strength of circadian and behavioural influences on intake by expressing both effects as a proportion of the mesor [30]. They showed that the circadian peak-to-trough amplitude of caloric intake accounted for approximately 34% of the mesor, whereas the difference between the first and last meals of the waking episode accounted for a larger proportion (49%), indicating a stronger apparent behavioural influence when analyses included the longest fasting interval. However, when behavioural effects were examined under conditions of equivalent fasting duration—by restricting comparisons to meals preceded by the same 3 h fasting interval—the magnitude of behavioural variability (31% of the mesor) closely matched the circadian peak-to-trough amplitude. This finding indicates that circadian and behavioural influences on energy intake are of comparable magnitude when confounding by fasting duration is minimized, and that the larger behavioural effect observed across the full waking episode is partly driven by differences in preceding fast length rather than time awake alone. Notably, the balance between circadian and behavioural contributions varied by weight status, with adolescents with obesity showing the smallest divergence between the two, driven largely by a flatter behavioural distribution of caloric intake rather than marked differences in circadian rhythmicity. Together, this experimental evidence helps contextualise the present modelling results and provides a plausible explanation for why explicit chrononutrition variables offered limited additional discriminatory value when rich socio-demographic and behavioural covariates were included. Measures such as physical activity, dieting behaviour, and other lifestyle factors may implicitly capture information related to both behavioural eating patterns and circadian alignment. Conversely, in the absence of such covariates, timing of energy intake—particularly when represented using repeated daily measures that preserve day-to-day variability—may serve as a proxy for underlying behavioural and circadian regulation, thereby substantially improving discrimination of overweight status. These findings reinforce the importance of distinguishing circadian from behavioural determinants of eating behaviour, and suggest that both predictive models and interventions targeting meal timing may need to consider not only when individuals eat, but also the extent to which circadian regulation of energy intake is preserved. The influence of socio-demographic variables on model performance is particularly relevant when interpreting the limited incremental value of chrononutrition variables observed in this study. Variables such as sex may act as strong predictors in their own right and may also proxy underlying biological and behavioural processes related to timing of eating and obesity risk [31]. Indeed, emerging evidence suggests that the relationship between circadian alignment, meal timing, and adiposity differs between females and males, with sex-specific associations observed for body fat distribution, cardiometabolic risk, and metabolic regulation. In predictive models that include sex alongside behavioural covariates, some of the information captured by chrononutrition variables may therefore be indirectly accounted for, reducing their apparent added value. Importantly, our outcome measure focused on overall overweight status and did not include indices of fat distribution or ectopic adiposity, which are known to differ by sex and to be differentially associated with circadian disruption and eating timing. As a result, potential sex-specific effects of meal timing on regional fat deposition may not have been fully captured by the models. These considerations suggest that the contribution of chrononutrition to overweight prediction may be more pronounced for outcomes that better reflect sex-dependent patterns of adiposity or metabolic risk, and that future prediction models may benefit from incorporating more granular body composition measures alongside sex-stratified analyses to better disentangle behavioural and circadian pathways. Overall, our findings are consistent with the findings of Di Traglia et al. (2024) [5]. Accordingly, the authors investigated whether using data on timing of eating with deep learning prediction models and with a linear regression model enhances the prediction of BMI, compared to models containing only energy intake from the whole day. They found that data on timing of eating did not enhance the performance of the deep learning models. The authors argued that dividing the energy intake by meal timing introduced unnecessary noise in the learning process. When it came to linear regression, the model with chrononutrition information performed slightly better, albeit not statistically significantly. Our findings align with the latter study, despite using different prediction models and using overweight status as a categorical variable, instead of a continuous BMI variable. This research has some limitations, in that it was conducted on data collected 20 years ago. During this time, the dietary patterns and day-to-day lifestyle-related activities of the Italian population could have changed, which may also affect the relevance and predictive power of the model. A replication of this study, using more recent data (like INRAN-SCAI 2018–2020 [32]) is warranted to assess the influence of more recent dietary practices related to chrononutrition like intermittent fasting, a type of time-restricted eating that has become more prevalent in the last decade. Further limitations are due to the limited number of days of data collection, which implies that elevated within-subject random error [33] may have affected the chrononutritional variables, resulting in reduced AuROCs. Moreover, the data used were self-reported, which may have introduced problems like incorrect recall of information or errors in measuring the food quantity by the participants, potentially leading to bias. In particular, only if misclassification of intake was non-differential by timing of eating, we might assume a similar impact on prediction for all models we considered. Again, it is arguable whether the data of food intake in specific day times may be more or less affected by misreporting and in comparison to total daily energy intake, though some research suggests that breakfast is better-reported compared to other meals and snacks [34]. The latter, especially late/night ones, may be less accurately reported for practical and conformity reasons. Another element to consider is the tendency of younger adults’ metabolism to be shifted towards later chronotypes [7,35], which may warrant a stratified analysis by age groups. This study is also limited by the fact that the cross-sectional outcome may not properly capture chrononutrition effects related to circadian alignment and energy regulation over time, as it lacks explicit information on habitual eating window/fasting duration and chronotype. Hence, for future research, a large prospective study could be set up to assess, longitudinally rather than cross-sectionally, the power of chrononutritional habits to predict overweight and obesity, including dietary assessments at distal time points, after an initial health assessment of the participants, and of their chronotype. Such a study would allow one to adopt a causal approach including appropriate control for confounding factors, and so that the potential causal relationship might also be elucidated between timing and regularity of eating and overweight/obesity status. 5. Conclusions To summarize, this study provides a good insight into how the performance of different prediction models, logistic regression and random forest, for predicting overweight status, is influenced by providing meal timing information compared to using the energy intake summary from the whole day only. When including both nutritional and demographic/behavioural predictors, this research only found an improvement in the accuracy of overweight status prediction in the logistic regression models when the models were applied on the same data they were tested on, which made them not suitable for generalization due to likely overfitting. In fact, the models using chrononutrition information had better performance than the models that only used the summary of energy intake from the whole day when only energy variables were included as predictors, whilst when additional socio-demographic variables were included, chrononutrition data did not improve discriminatory accuracy, whether using classic statistical or machine learning methodology. These results indicate that further research is needed to assess the relevance and quality of timing of energy intake, and its relation to other lifestyle variables also in order to optimise the design, data collection, and dietary assessment of future nutrition surveys studies. Additional refinement may come from larger prospective datasets where obesity rather than overweight may be the outcome, as well as from more modern tools to draw objective measures of food intake during 24 h. Longitudinal analysis could be useful to confirm or further disentangle the direction of causality in the relationship between the timing and regularity of eating and increased body weight.