The effects of fractional derivative and gravity on wave propagation in micro-elongated thermo-elastic media under the refined dual-phase-lag model Authors: Ahmed Ramady, Mohamed F. Ismail, Hamdy M. Ahmed, Soliman Alkhatib, M. Elsaid Ramadan, Eslam Nabil Shawki El-Ganzoury Published: 2025 ABSTRACT This paper examines the impact of gravity on wave propagation in a micro-elongated thermoelastic medium incorporating fractional conformable derivatives under the Dual-Phase-Lag (DPL) and the Refined Dual-Phase-Lag (RDPL) model. The governing equations of heat conduction, motion, and microelongation are formulated to account for finite thermal propagation speed, microelongated, and gravitational effects. By implementing a suitable nondimensionalization process and applying the Normal Mode Analysis method, the coupled system of partial differential equations is reduced to an semi-analytically solvable. Solutions for displacement, stress, temperature, and microelongation fields are obtained, enabling a detailed assessment of the dynamic response of the medium. Numerical simulations are performed to illustrate the role of fractional-order parameters and phase-lag effects in modifying wave characteristics. The results demonstrate that gravity has a significant impact on wave amplitude, velocity, and attenuation, while the fractional conformable derivative and RDPL model enhance control over thermal relaxation behavior. This study contributes to improved modeling of advanced thermoelastic materials in gravitational environments. Introduction Fractional thermoelasticity is a sophisticated enhancement of classical thermoelastic theories that integrates fractional-order derivatives into the governing equations of energy. In contrast to conventional models that presume an immediate or straightforward time-dependent evolution of heat flow response and mechanical strain, the fractional framework incorporates the heredity effects present in several genuine materials. The significance of these effects is magnified in contexts where thermal and mechanical responses deviate from the standard exponential relaxation model, such as in biological tissues, functionally graded materials, polymers, and micro- and nano-scale applications. In fractional thermoelasticity, the heat conduction law can be expressed utilizing fractional derivatives in time or space, allowing heat to propagate in a non-Fourier manner capturing phenomena such as finite thermal propagation speed or thermal wave dispersion. It is also possible to change the stress-strain relationship so that it represents viscoelastic-like recovery behaviors that vary with time. Fractional parameters give flexibility to suit experimental results more closely, giving improved modeling of thermal lag, damping properties, wave attenuation, and dynamic stability. Fractional thermoelastic theory provides a more realistic and comprehensive mathematical description for analyzing coupled thermo-mechanical responses in complex materials and advanced engineering systems, particularly when classical theories fail to predict observed physical behavior accurately for more details, see1–10. The RDPL model is an advanced formulation of heat conduction that extends the classical DPL theory by introducing additional accuracy in describing the lagging behavior among heat flux and temperature gradients in materials. In the classical DPL model, two relaxation times are considered: one for the temperature gradient and another for the heat flux. However, the classical DPL model sometimes leads to mathematical complications or inconsistencies in capturing the real physical behavior of materials subjected to ultra-fast thermal processes, such as those encountered in micro-electronics cooling, laser irradiation, and thermoelastic wave propagation. The refined version enhances the governing heat conduction law by incorporating higher-order terms and more precise phase-lag parameters, which better describe the finite speed of heat propagation and the non-local, memory-dependent nature of thermal interactions. This refinement allows the model of RDPL to accurately represent situations where heat does not diffuse instantly, but instead propagates in a wave-like manner with measurable delay. It also resolves limitations such as non-physical instabilities and inaccurate prediction of temperature peaks that may arise in the classical formulations for more details, see11–19. Consequently, the RDPL model has gained importance in modeling thermoelastic problems, particularly in nano-scale and micro-scale systems, where the classical Fourier and conventional non-Fourier models fail to capture the experimentally observed thermal response. Microelongated thermoelastic media are an essential type of generalized continuum that account for both classical material deformation and additional microelongation effects caused by the medium’s internal structure. Unlike standard thermoelastic models, which only consider macroscopic displacement and temperature variations, the micro-elongated theory includes an additional field variable that describes micro-scale elongation and deformation, such as fiber stretching, molecular chain extension, or structural reorientation within the material. This microelongated degree of freedom enables the model to more accurately represent complex materials like polymers, biological tissues, composites, porous solids, and engineered microelongated materials, in which internal fibers or particles stretch independently, influencing the overall response. When combined with thermal effects, micro-elongation interacts directly with the temperature field, resulting in new stress components and energy exchange mechanisms that are not present in classical thermoelasticity. As a result, wave propagation, stress distribution, and temperature evolution in micro-elongated media exhibit distinctive behavior, including dispersion, attenuation, and relaxation effects influenced by micro characteristics, see20–26. This theory is particularly useful when examining high-frequency wave motion, micro-scale thermo-mechanical processes, or materials subjected to rapid heating, because it captures the delayed and nonuniform internal responses that conventional thermoelastic models fail to describe. This collection of papers27–37 highlights research across applied mechanics, materials, and monitoring techniques, with a strong focus on complex systems and performance optimization. The included works detail advancements in nonlinear dynamics for optimizing vibration control and energy harvesting, alongside studies exploring the microscopic irreversible deformation in fiber-reinforced composites under cyclic loading. The collection further incorporates methods for structural health monitoring, such as ultrasonic stress wave detection in power semiconductors and bolt axial stress measurement. Critical to thermoelasticity, one paper specifically analyzes thermoelastic damping and frequency shift in nano-scale piezoelectric fiber-reinforced composite beams under multi-phase thermal conditions, while another studies complex wave interactions in graded piezomagnetic materials influenced by gravity. Finally, the collection addresses high-accuracy flow measurement and electrical-thermal conduction in electrified railway systems The influence of gravity on thermoelastic materials plays a significant role in altering the behavior of both thermal and mechanical fields, especially in large-scale structures or geological and astrophysical environments. When gravity is present, the body experiences a constant internal stress known as initial stress or pre-stress, which alters the propagation properties of elastic and thermal waves in the medium. The gravitational force adds a new term to the equations of motion, impacting displacement, stress distribution, and temperature fluctuation. As a result, the material may deform even in the absence of external loads, and temperature distribution may become non-uniform as density and internal pressure vary with depth. gravity in thermoelastic wave propagation can reduce or accelerate wave speeds depending on direction, and it can also amplify attenuation effects caused by the interaction of strain and temperature fields. The presence of gravity is particularly significant in high-temperature environments such as the Earth’s crust, planetary interiors, or space structures, where even small changes in stress can lead to noticeable thermoelastic responses for more details, see38–47. Therefore, incorporating gravity into thermoelastic models is essential for obtaining accurate predictions of stress, displacement, and thermal behavior in real-world applications involving large bodies or systems operating under strong gravitational effect. Unlike previous RDPL fractional studies which investigate thermoelasticity or micro-elongated behavior separately, the present work is the first to formulate a unified thermoelastic model that simultaneously incorporates micro-elongation, gravity effects, and fractional RDPL heat conduction within a single coupled framework This paper focuses on exploring how gravitational effects together with the fractional conformable derivative effect the behavior of a microelongated thermoelastic half-space, analyzed within both the DPL and the RDPL models. The study begins by formulating the fundamental field equations governing motion, heat conduction, and microelongation, in order to accurately represent the mutual coupling among mechanical and thermal responses in the presence of gravity. To simplify the mathematical structure and clearly emphasize the main physical parameters controlling the system’s response, these equations are converted into a dimensionless. For analytical convenience, the obtained system of partial differential equations is then systematically transformed into a set of ordinary differential equations using the Normal Mode Analysis, which enables a more tractable investigation of wave propagation properties and the dynamic characteristics of the medium. The boundary conditions applied at the surface \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z=0$$\end{document} are subsequently utilized to evaluate the constants (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{1},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{2},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{3},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_{4}$$\end{document}), which are necessary for constructing the solution of the problem. After deriving the analytical expressions, numerical simulations and graphical representations are performed to examine how different physical parameters especially gravitational effects, phase-lag times, and fractional parameters affect temperature distribution, stress fields, displacement, and microelongation behavior. The resulting plots clearly illustrate the significant role that gravity and fractional parameters play in modifying the thermo-microelongated response of the medium under the two theoretical models. Proposed model In this section, we introduce the fundamental governing equations that describe 2-dimensional microelongated thermoelastic behavior within the context of DPL model and RDPL model. Special attention is given to analyzing the effect of gravity on the system. To facilitate further analysis and simplify mathematical complexity, these equations are reformulated in a dimensionless form. The equation of motion1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \sigma _{ij,j}+F_{i}=\rho u_{i,tt}, \end{aligned}$$\end{document}the stress tensor can be written as follows49:2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \sigma _{ij}=2\mu \varepsilon _{ij}+\left( \lambda e-\beta _{0}T+\lambda _{0}\psi \right) \delta _{ij}. \end{aligned}$$\end{document}The equation of microelongated3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} a_{0}\psi _{,ii}+\beta _{1}T-\lambda _{1}\psi -\lambda _{0}u_{j,j}=\frac{ \rho j^{*}\psi _{,tt}}{2}. \end{aligned}$$\end{document}The \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2-$$\end{document}dimensional heat conduction equation within the RDPL model is given as13:4\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} 0= & k\left( 1+\Sigma _{n=1}^{N}\frac{\tau _{\theta }^{n-1+\alpha }}{\Gamma \left( n+\alpha \right) }\frac{\partial ^{\alpha }}{\partial t^{\alpha }} \frac{\partial ^{n-1}}{\partial t^{n-1}}\right) T _{,ii}-\beta _{1}T_{0}\psi _{,t} \nonumber \\ & -\left( 1+\Sigma _{n=1}^{N}\frac{\tau _{q}^{n-1+\alpha }}{\Gamma \left( n+\alpha \right) }\frac{\partial ^{\alpha }}{\partial t^{\alpha }}\frac{ \partial ^{n-1}}{\partial t^{n-1}}\right) \left[ \beta _{0}T_{0}\left( u_{,xt}+w_{,zt}\right) +\rho c_{e}T _{,t}\right] , \end{aligned}$$\end{document}where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\frac{\partial ^{\alpha }}{\partial t^{\alpha }}$$\end{document} is the conformable fractional derivative of order \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0< \alpha \le 1$$\end{document}48. When 1- \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N=3$$\end{document} and (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{\theta }< \tau _{q}\ne 0,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\ne 0$$\end{document}) is RDPL model, 2- \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N=1$$\end{document} and (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{\theta }< \tau _{q}\ne 0,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\ne 0$$\end{document}) is DPL model, Noted that5\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} {u=u\left( x, z, t\right) ,{ \ \ \ \ \ }w=w\left( x, z, t\right) ,{\ \ \ \ \ \ \ }v=0.} \end{aligned}$$\end{document}Using Eq. (2) in Eq. (1) with the help of Eq. (5) and gravity g, one acquires that6\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \rho u_{,tt}=\mu ~ \nabla ^{2}u+\left( \lambda +\mu \right) e_{,x}-\beta _{0}T_{,x}+\lambda _{0}\psi _{,x}+\rho gw_{,x}, \end{aligned}$$\end{document}7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \rho w_{,tt}=\mu ~ \nabla ^{2}w+\left( \lambda +\mu \right) e_{,z}-\beta _{0}T_{,z}+\lambda _{0}\psi _{,z}-\rho gu_{,x}. \end{aligned}$$\end{document}Using Eq. (5) in Eq. (3), one acquires8\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} a_{0}\psi _{,ii}+\beta _{1}T-\lambda _{1}\psi -\lambda _{0}\left( u_{,x}+w_{,z}\right) =\frac{\rho j^{*}\psi _{,tt}}{2}. \end{aligned}$$\end{document}The characteristics of the conformable derivative, as presented in50 are incorporated into Eq. (4), leading to the following result:9\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} 0= & k\left( 1+\Sigma _{n=1}^{N}\frac{\tau _{\theta }^{n-1+\alpha }}{\Gamma \left( n+\alpha \right) }\left( t^{1-\alpha }\right) \frac{\partial ^{n}}{ \partial t^{n}}\right) T _{,ii}-\beta _{1}T_{0}\psi _{,t} \nonumber \\ & -\left( 1+\Sigma _{n=1}^{N}\frac{\tau _{q}^{n-1+\alpha }}{\Gamma \left( n+\alpha \right) }\left( t^{1-\alpha }\right) \frac{\partial ^{n}}{\partial t^{n}}\right) \left[ \beta _{0}T_{0}\left( u_{,xt}+w_{,zt}\right) +\rho c_{e}T _{,t}\right] . \end{aligned}$$\end{document}In our analysis, we utilize the following set of non-dimensional variables:10\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left( x,z\right)= & \frac{c_{1}}{\omega ^{*}}\left( \bar{x}, \bar{z}\right) , \left( u, v\right) =\frac{T_{0}\beta _{0}}{ \rho c_{1}\omega ^{*}}\left( \bar{u}, \bar{v}\right) , \left( t, \tau _{\theta }, \tau _{q}\right) =\frac{\left( \bar{ t}, \bar{\tau }_{\theta }, \bar{\tau }_{q}\right) }{\omega ^{*}}, T=T_{0}\bar{T}, \sigma _{ij}=\beta _{1}T_{0}\bar{ \sigma }_{ij}, \nonumber \\ \psi= & \frac{\beta _{0}T_{0}}{\lambda _{0}}\bar{\psi }, g=\omega ^{*}c_{1}\bar{g}, k\omega ^{*}=\rho c_{1}^{2}c_{e}, \rho c_{1}^{2}=\lambda +\mu . \end{aligned}$$\end{document}Using Eq. (10) in Eqs. (6), (7), (8), and (9), one discovers11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left( a_{1}\nabla ^{2}-\frac{\partial ^{2}}{\partial t^{2}}+a_{2}\frac{ \partial ^{2}}{\partial x^{2}}\right) u+\left( a_{2}\frac{\partial ^{2}}{ \partial x\partial z}+g\frac{\partial }{\partial x}\right) w-\frac{\partial T }{\partial x}+\frac{\partial \psi }{\partial x}=0, \end{aligned}$$\end{document}12\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left( a_{2}\frac{\partial ^{2}}{\partial x\partial z}-g\frac{\partial }{ \partial x}\right) u+\left( a_{1}\nabla ^{2}-\frac{\partial ^{2}}{\partial t^{2}}+a_{2}\frac{\partial ^{2}}{\partial z^{2}}\right) w-\frac{\partial T}{ \partial z}+\frac{\partial \psi }{\partial z}=0, \end{aligned}$$\end{document}13\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} a_{5}\frac{\partial u}{\partial x}+a_{5}\frac{\partial w}{\partial z} -a_{3}T-\left( \nabla ^{2}-a_{4}-a_{6}\frac{\partial ^{2}}{\partial t^{2}} \right) \psi =0, \end{aligned}$$\end{document}14\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} a_{8}\left( 1+\tau _{2}\right) \frac{\partial ^{2}u}{\partial x\partial t} +a_{8}\left( 1+\tau _{2}\right) \frac{\partial ^{2}w}{\partial z\partial t} -\left( \nabla ^{2}+\tau _{1}\nabla ^{2}-a_{7}\frac{\partial }{\partial t} -\tau _{2}a_{7}\frac{\partial }{\partial t}\right) T+a_{9}\frac{\partial \psi }{\partial t}=0, \end{aligned}$$\end{document}where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{1}=\frac{\mu }{c_{1}^{2}\rho },$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{2}=\frac{\mu +\lambda }{ c_{1}^{2}\rho },$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{3}=\frac{\lambda _{0}\beta _{1}c_{1}^{2}}{\beta _{0}a_{0}\omega ^{*2}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{4}=\frac{c_{1}^{2}\lambda _{1}}{a_{0}\omega ^{*2}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{5}=\frac{\lambda _{0}^{2}}{a_{0}\rho \omega ^{*2}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{6}=\frac{\rho j^{*}c_{1}^{2}}{2a_{0}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{7}=\frac{\rho c_{e}c_{1}^{2}}{k\omega ^{*}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{8}=\frac{\beta _{0}^{2}T_{0}}{k\omega ^{*}\rho },$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{9}=\frac{\beta _{0}\beta _{1}T_{0}c_{1}^{2}}{k\omega ^{*}\lambda _{0}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{1}=\Sigma _{n=1}^{N}\frac{ \tau _{\theta }^{n-1+\alpha }}{\Gamma \left( n+\alpha \right) }\left( t^{1-\alpha }\right) \frac{\partial ^{n}}{\partial t^{n}},$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{2}=\Sigma _{n=1}^{N}\frac{ \tau _{q}^{n-1+\alpha }}{\Gamma \left( n+\alpha \right) }\left( t^{1-\alpha }\right) \frac{ \partial ^{n}}{\partial t^{n}}.$$\end{document} By inserting Eq. (10) into Eq. (2) yields15\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \sigma _{xx}= & \frac{\partial u}{\partial x}+a_{10}\frac{\partial w}{ \partial z}-T+\psi , \end{aligned}$$\end{document}16\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \sigma _{zz}= & a_{10}\frac{\partial u}{\partial x}+\frac{\partial w}{ \partial z}-T+\psi , \end{aligned}$$\end{document}17\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \sigma _{zx}= & \sigma _{xz}=a_{1}\frac{\partial u}{\partial z}+a_{1}\frac{ \partial w}{\partial x}. \end{aligned}$$\end{document}where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$a_{10}=\frac{\lambda _{0}^{2}}{a_{0}\rho \omega ^{*2}}.$$\end{document} The displacement potentials \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Phi (x, z, t)$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Psi (x, z, t)$$\end{document}, related to the displacement components, are introduced such that18\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} u=\Phi _{,x}+\Psi _{,z},{ \ \ \ \ \ }w=\Phi _{,z}-\Psi _{,x}. \end{aligned}$$\end{document}Using Eq. (18) in Eqs. (11), (12), (13), and ( 14), we see19\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left[ \left( a_{1}+a_{2}\right) \nabla ^{2}-\frac{\partial ^{2}}{\partial t^{2}}\right] \Phi -g\Psi _{,x}-T+\psi =0, \end{aligned}$$\end{document}20\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} g\Phi _{,x}+\left[ a_{1}\nabla ^{2}-\frac{\partial ^{2}}{\partial t^{2}} \right] \Psi =0, \end{aligned}$$\end{document}21\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} a_{5}\nabla ^{2}\Phi -a_{3}T-\left( \nabla ^{2}-a_{4}-a_{6}\frac{\partial ^{2}}{\partial t^{2}}\right) \psi =0, \end{aligned}$$\end{document}22\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} a_{8}\left( 1+\tau _{2}\right) \nabla ^{2}\Phi _{,t}-\left( \nabla ^{2}+\tau _{1}\nabla ^{2}-a_{7}\frac{\partial }{\partial t}-\tau _{2}a_{7}\frac{ \partial }{\partial t}\right) T+a_{9}\frac{\partial \psi }{\partial t}=0. \end{aligned}$$\end{document} Solution The solution corresponding to the physical variable is formulated and analyzed through normal modes as:23\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left[ u, w, T, \psi , \Phi , \Psi , \sigma _{ij}\right] \left( x, z, t\right) =\left[ \tilde{u}, \tilde{w}, \tilde{T}, \tilde{\psi }, \tilde{\Phi } , \tilde{\Psi }, \tilde{\sigma }_{ij}\right] \left( z\right) e^{i\left( -bx+\frac{\omega t^{\alpha }}{\alpha }\right) }. \end{aligned}$$\end{document}where, b is the wave number and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\omega$$\end{document} is the frequency Inserting Eq. (23) into Eqs. (19), (20), (21), and (22), we obtain24\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left( \iota _{1}D^{2}+\iota _{2}\right) \tilde{\Phi }+\iota _{3}\tilde{\Psi }- \tilde{T}+\tilde{\psi }=0, \end{aligned}$$\end{document}25\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} -\iota _{3}\tilde{\Phi }+\left[ a_{1}D^{2}+\iota _{4}\right] \tilde{\Psi }=0, \end{aligned}$$\end{document}26\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left[ a_{5}D^{2}-\iota _{5}\right] \tilde{\Phi }-a_{3}\tilde{T}-\left( D^{2}+\iota _{6}\right) \tilde{\psi }=0, \end{aligned}$$\end{document}27\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left[ \iota _{7}D^{2}-\iota _{8}\right] \tilde{\Phi }-\left( \iota _{9}D^{2}-\iota _{10}\right) \tilde{T}+\iota _{11}\tilde{\psi }=0, \end{aligned}$$\end{document}where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{1}=a_{1}+a_{2},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{2}=\omega ^{2}t^{2\alpha -2}-i\left( \alpha -1\right) \omega t^{\alpha -2}-b^{2}\iota _{1},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{3}=ibg,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{4}=\omega ^{2}t^{2\alpha -2}-i\left( \alpha -1\right) \omega t^{\alpha -2}-a_{1}b^{2},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{5}=b^{2}a_{5},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{6}=a_{6}\left[ \omega ^{2}t^{2\alpha -2}-i\left( \alpha -1\right) \omega t^{\alpha -2}\right] -a_{4}-b^{2},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{7}=ia_{8}\left( 1+\tau _{2}\right) \omega t^{\alpha -1},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{8}=\iota _{7}b^{2},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{9}=\left( 1+\tau _{1}\right) ,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{10}=\iota _{9}b^{2}+i\left( 1+\tau _{2}\right) a_{7}\omega t^{\alpha -1},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\iota _{11}=ia_{9}\omega t^{\alpha -1}.$$\end{document} It is observed that the cases \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{1}=\frac{i\omega \tau _{\theta }^{\alpha }}{\Gamma \left( 1+\alpha \right) }+\frac{\omega \tau _{\theta }^{1+\alpha }}{\Gamma \left( 2+\alpha \right) }\left[ it^{-1}-\omega t^{\alpha -1}\right] +\frac{\omega \tau _{\theta }^{2+\alpha }}{\Gamma \left( 3+\alpha \right) }\left[ i\left( \alpha -1\right) \left( \alpha -2\right) t^{-2}-3\omega \left( \alpha -1\right) t^{\alpha -2}-i\omega ^{2}t^{2\alpha -2}\right]$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{2}=\frac{i\omega \tau _{q}^{\alpha }}{\Gamma \left( 1+\alpha \right) }+\frac{\omega \tau _{q}^{1+\alpha }}{\Gamma \left( 2+\alpha \right) }\left[ it^{-1}-\omega t^{\alpha -1}\right] +\frac{\omega \tau _{q}^{2+\alpha }}{ \Gamma \left( 3+\alpha \right) }\left[ i\left( \alpha -1\right) \left( \alpha -2\right) t^{-2}-3\omega \left( \alpha -1\right) t^{\alpha -2}-i\omega ^{2}t^{2\alpha -2}\right]$$\end{document} correspond to the RDPL model\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{1}=\frac{i\omega \tau _{\theta }^{\alpha }}{\Gamma (\alpha +1)}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{2}=\frac{i\omega \tau _{q}^{\alpha }}{\Gamma (\alpha +1)}$$\end{document} correspond to the DPL modelA nontrivial solution of Eqs. (24)–(27) arises when the determinant of the associated coefficient matrix must vanish. The MATLAB software provides the following outcome28\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left( D^{8}-A_{1}D^{6}+A_{2}D^{4}-A_{3}D^{2}+A_{4}\right) \{\tilde{\Phi } \left( z\right) , \tilde{\Psi }\left( z\right) , \tilde{T} \left( z\right) , \tilde{\psi }\left( z\right) \}=0. \end{aligned}$$\end{document}Here, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$A_{1}=\frac{1}{\iota _{1}\iota _{9}a_{1}}\{-\iota _{9}a_{1}a_{5}-\iota _{1}\iota _{4}\iota _{9}+\iota _{1}\iota _{10}a_{1}-\iota _{2}\iota _{9}a_{1}-\iota _{1}\iota _{6}\iota _{9}a_{1}+\iota _{7}a_{1}\},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{1}=\frac{i\omega \tau _{\theta }^{\alpha }}{\Gamma \left( 1+\alpha \right) }+\frac{\omega \tau _{\theta }^{1+\alpha }}{\Gamma \left( 2+\alpha \right) }\left[ it^{-1}-\omega t^{\alpha -1}\right] +\frac{\omega \tau _{\theta }^{2+\alpha }}{\Gamma \left( 3+\alpha \right) }\left[ i\left( \alpha -1\right) \left( \alpha -2\right) t^{-2}-3\omega \left( \alpha -1\right) t^{\alpha -2}-i\omega ^{2}t^{2\alpha -2}\right]$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{2}=\frac{i\omega \tau _{q}^{\alpha }}{\Gamma \left( 1+\alpha \right) }+\frac{\omega \tau _{q}^{1+\alpha }}{\Gamma \left( 2+\alpha \right) }\left[ it^{-1}-\omega t^{\alpha -1}\right] +\frac{\omega \tau _{q}^{2+\alpha }}{ \Gamma \left( 3+\alpha \right) }\left[ i\left( \alpha -1\right) \left( \alpha -2\right) t^{-2}-3\omega \left( \alpha -1\right) t^{\alpha -2}-i\omega ^{2}t^{2\alpha -2}\right]$$\end{document} correspond to the RDPL model \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{1}=\frac{i\omega \tau _{\theta }^{\alpha }}{\Gamma \left( 1+\alpha \right) }+\frac{\omega \tau _{\theta }^{1+\alpha }}{\Gamma \left( 2+\alpha \right) }\left[ it^{-1}-\omega t^{\alpha -1}\right] +\frac{\omega \tau _{\theta }^{2+\alpha }}{\Gamma \left( 3+\alpha \right) }\left[ i\left( \alpha -1\right) \left( \alpha -2\right) t^{-2}-3\omega \left( \alpha -1\right) t^{\alpha -2}-i\omega ^{2}t^{2\alpha -2}\right]$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{2}=\frac{i\omega \tau _{q}^{\alpha }}{\Gamma \left( 1+\alpha \right) }+\frac{\omega \tau _{q}^{1+\alpha }}{\Gamma \left( 2+\alpha \right) }\left[ it^{-1}-\omega t^{\alpha -1}\right] +\frac{\omega \tau _{q}^{2+\alpha }}{ \Gamma \left( 3+\alpha \right) }\left[ i\left( \alpha -1\right) \left( \alpha -2\right) t^{-2}-3\omega \left( \alpha -1\right) t^{\alpha -2}-i\omega ^{2}t^{2\alpha -2}\right]$$\end{document} correspond to the RDPL model \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{1}=\frac{i\omega \tau _{\theta }^{\alpha }}{\Gamma (\alpha +1)}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{2}=\frac{i\omega \tau _{q}^{\alpha }}{\Gamma (\alpha +1)}$$\end{document} correspond to the DPL model \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{1}=\frac{i\omega \tau _{\theta }^{\alpha }}{\Gamma (\alpha +1)}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\tau _{2}=\frac{i\omega \tau _{q}^{\alpha }}{\Gamma (\alpha +1)}$$\end{document} correspond to the DPL model \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$A_{2}=\frac{-1}{\iota _{1}\iota _{9}a_{1}}\{\iota _{4}\iota _{7}-\iota _{8}a_{1}-\iota _{3}^{2}\iota _{9}+\iota _{7}a_{1}a_{3}+\iota _{10}a_{1}a_{5}+\iota _{11}a_{1}a_{5}+\iota _{1}\iota _{4}\iota _{10}-\iota _{2}\iota _{4}\iota _{9}$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$+\iota _{2}\iota _{10}a_{1}+\iota _{6}\iota _{7}a_{1}+\iota _{5}\iota _{9}a_{1}-\iota _{4}\iota _{9}a_{5}+\iota _{1}\iota _{6}\iota _{10}a_{1}-\iota _{2}\iota _{6}\iota _{9}a_{1}-\iota _{1}\iota _{11}a_{1}a_{3}-\iota _{1}\iota _{4}\iota _{6}\iota _{9}\},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$A_{3}=\frac{1}{\iota _{1}\iota _{9}a_{1}}\{\iota _{3}^{2}\iota _{10}-\iota _{8}a_{1}a_{3}-\iota _{3}^{2}\iota _{6}\iota _{9}$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$+\iota _{2}\iota _{4}\iota _{10}+\iota _{4}\iota _{6}\iota _{7}+\iota _{4}\iota _{5}\iota _{9}+\iota _{4}\iota _{7}a_{3}-\iota _{6}\iota _{8}a_{1}-\iota _{5}\iota _{10}a_{1}$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$-\iota _{4}\iota _{8}-\iota _{5}\iota _{11}a_{1}+\iota _{4}\iota _{10}a_{5}+\iota _{4}\iota _{11}a_{5}+\iota _{1}\iota _{4}\iota _{6}\iota _{10}-\iota _{2}\iota _{4}\iota _{6}\iota _{9}-\iota _{1}\iota _{4}\iota _{11}a_{3}+\iota _{2}\iota _{6}\iota _{10}a_{1}-\iota _{2}\iota _{11}a_{1}a_{3}\},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$A_{4}=\frac{-1}{\iota _{1}\iota _{9}a_{1}}\{-\iota _{4}\iota _{5}\iota _{10}-\iota _{4}\iota _{5}\iota _{11}-\iota _{4}\iota _{8}a_{3}-\iota _{4}\iota _{6}\iota _{8}+\iota _{3}^{2}\iota _{6}\iota _{10}-\iota _{3}^{2}\iota _{11}a_{3}+\iota _{2}\iota _{4}\iota _{6}\iota _{10}-\iota _{2}\iota _{4}\iota _{11}a_{3}\}.$$\end{document} This equation can be expressed as29\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left( D^{2}-r_{1}\right) \left( D^{2}-r_{2}\right) \left( D^{2}-r_{3}\right) \left( D^{2}-r_{4}\right) \{\tilde{\Phi }\left( z\right) , \tilde{\Psi }\left( z\right) , \tilde{T}\left( z\right) , \tilde{\psi }\left( z\right) \}=0. \end{aligned}$$\end{document}Here, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_{1},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_{2},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_{3},$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_{4}$$\end{document} are roots The general solution of Eq. (29) bound as \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z\rightarrow \infty$$\end{document} can be written as30\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{\Phi }\left( z\right)= & \Sigma _{m=1}^{4}R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}31\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{\Psi }\left( z\right)= & \Sigma _{m=1}^{4}\Theta _{1m}R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}32\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{\psi }\left( z\right)= & \Sigma _{m=1}^{4}\Theta _{2m}R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}33\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{T}\left( z\right)= & \Sigma _{m=1}^{4}\Theta _{3m}R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Theta _{1m}=\frac{\iota _{3}}{a_{1}r_{m}^{2}+\iota _{4}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Theta _{2m}=\frac{a_{5}\iota _{9}r_{m}^{4}-\left( \iota _{5}\iota _{9}+a_{5}\iota _{10}+a_{3}\iota _{7}\right) r_{m}^{2}+a_{5}\iota _{8}+\iota _{5}\iota _{10} }{\iota _{9}r_{m}^{4}-\left( \iota _{6}\iota _{9}-\iota _{10}\right) r_{m}^{2}+\iota _{6}\iota _{10}+a_{3}\iota _{11}},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Theta _{3m}=\iota _{1}r_{m}^{2}-\iota _{2}+\iota _{3}\Theta _{1m}+\Theta _{2m}.$$\end{document} Employing Eq. (23) in Eq. (18), then using Eqs. (30 ) and (31), one infers that34\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{u}= & -\Sigma _{m=1}^{4}\left( r_{m}\Theta _{1m}+ib\right) R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}35\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{w}= & \Sigma _{m=1}^{4}\left( ib\Theta _{1m}-r_{m}\right) R_{m}e^{-r_{m}z}. \end{aligned}$$\end{document}Using Eq. (23) into Eqs. (15), (16), and (17 ), then employing Eqs. (32), (33), (34) and (35), one obtains36\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{\sigma }_{xx}= & \Sigma _{m=1}^{4}\Theta _{4m}R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}37\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{\sigma } _{zz}= & \Sigma _{m=1}^{4}\Theta _{5m}R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}38\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \tilde{\sigma } _{xz}= & \sigma _{zx}=\Sigma _{m=1}^{4}\Theta _{6m}R_{m}e^{-r_{m}z}, \end{aligned}$$\end{document}where, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Theta _{4m}=ib\left( 1-a_{10}\right) r_{m}\Theta _{1m}+a_{10}r_{m}^{2}-b^{2}+\Theta _{2m}-\Theta _{3m},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Theta _{5m}=ib\left( a_{10}-1\right) r_{m}\Theta _{1m}+r_{m}^{2}-a_{10}b^{2}+\Theta _{2m}-\Theta _{3m},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Theta _{6m}=a_{1}\left( r_{m}^{2}+b^{2}\right) \Theta _{1m}+2iba_{1}r_{m}.$$\end{document} Boundary condition To find \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( R_{1}, R_{2}, R_{3},\text { and } R_{4}\right)$$\end{document}, we have applied the boundary conditions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z=0$$\end{document} as:39\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \sigma _{zz}=f_{1}e^{i\left( -bx+\frac{\omega t^{\alpha }}{\alpha }\right) }, \sigma _{xz}=0, T=f_{2}e^{i\left( -bx+\frac{\omega t^{\alpha } }{\alpha }\right) }, \frac{\partial \psi }{\partial z}=0, \end{aligned}$$\end{document}where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$f_{1}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$f_{2}$$\end{document} are constants. Mechanical boundary condition: When a mechanical force acts on the surface of the half-space, the boundary condition \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}=f_{1}e^{i\left( -bx+\frac{\omega t^{\alpha }}{\alpha }\right) }$$\end{document} is applied. When the surface of the half-space is free of traction, the boundary condition \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}=0$$\end{document} is used. \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T=f_{2}e^{i\left( -bx+\frac{\omega t^{\alpha } }{\alpha }\right) }$$\end{document} indicates that The temperature at the boundary is harmonically varying in space and time, with amplitude And the fourth boundary condition, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\frac{\partial \psi }{\partial z}=0$$\end{document}, is a constraint on the rate of change of microelongation normal to the surface. By incorporating the assumed formulas for the variables into the previously specified boundary conditions (39, we create a set of equations that must be fulfilled by the given parameters. Consequently, a system of four equations is established. To determine the unknown constants \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( R_{1}, R_{2}, R_{3}, R_{4}\right)$$\end{document} we use the inverse matrix method to solve this system, ultimately obtaining explicit expressions for these constants as follows:40\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \left[ \begin{array}{c} R_{1} \\ R_{2} \\ R_{3} \\ R_{4} \end{array} \right] =\left[ \begin{array}{cccc} \Theta _{51} & \Theta _{52} & \Theta _{53} & \Theta _{54} \\ \Theta _{61} & \Theta _{62} & \Theta _{63} & \Theta _{64} \\ \Theta _{31} & \Theta _{32} & \Theta _{33} & \Theta _{34} \\ -r_{1}\Theta _{21} & -r_{2}\Theta _{22} & -r_{3}\Theta _{23} & -r_{4}\Theta _{24} \end{array} \right] ^{-1}\left[ \begin{array}{c} f_{1} \\ 0 \\ f_{2} \\ 0 \end{array} \right] \end{aligned}$$\end{document} Numerical discussions and results In this section, two-dimensional graphs are provided to illustrate certain solutions of the studied model. Aluminum epoxy is selected for this analysis as the thermoelastic material owing to its relevant properties, with the associated physical constants specified as42:\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} j^{*}= & 0.196\times 10^{-4}\text { m}^{2},{ \ \ \ \ \ \ \ \ \ \ } \lambda =7.59\times 10^{10} \frac{\text {N}}{\text {m}^{2}},{ \ \ \ \ \ \ \ \ \ }\rho =2190 \frac{\text {kg}}{\text {m}^{3}}, \\ \mu= & 1.89\times 10^{10} \frac{\text {N}}{\text {m}^{2}},{ \ \ \ \ }\beta _{0}=0.50\times 10^{5} \frac{\text {N}}{\text {m}^{2}.\text {K}},{ \ \ \ \ \ }\lambda _{0}=0.37\times 10^{10} \frac{\text {N}}{ \text {m}^{2}}, \\ \beta _{1}= & 0.50\times 10^{5} \frac{\text {N}}{\text {m}^{2}.\text {K}} {, \ \ \ \ \ \ \ }c_{e}=966 \frac{\text {J}}{\text {kg}.\text {K}},{ \ \ \ \ }k=252 \frac{\text {J}}{\text {m.s}.\text {K}},{ \ \ \ }T_{0}=293^{\circ }\text { K,} \\ \lambda _{1}= & 0.37\times 10^{10} \frac{\text {N}}{\text {m}^{2}},{ \ \ \ \ \ \ \ \ \ }a_{0}=0.61\times 10^{-10}{, \ \ \ \ \ \ \ } \tau _{\theta }=0.31\text { s},{ \ \ \ \ }\tau _{q}=0.7\text {\ s} \\ f_{1}= & 1.2,{\ \ \ }f_{2}=0.5. \end{aligned}$$\end{document}In this work, numerical computations are conducted for all physical quantity at a dimensionless time value of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$t=\frac{1}{5}$$\end{document} across the spatial domain \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0\le z\le 1$$\end{document} and along the surface \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x=\frac{3}{2}$$\end{document}. The numerical method implemented in this study serves to analyze and characterize the variations in the physical quantities u, w, T, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi ,$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx},$$\end{document} \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz},$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document}. The graphical representations demonstrate the theoretical predictions based on the DPL model, and RDPL model providing a comparative understanding of their respective behaviors. Specifically, Figs. 1, 2, 3, 4, 5, 6, 7 and 8 introduce a detailed comparison between the DPL model and RDPL model examining the effect of gravity at a fractional order \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5$$\end{document}. This comparative analysis highlights the difference in elastic behavior, thermal response, and wave propagation under the two models, offering valuable insights into their applicability in distinction physical scenarios. The horizontal displacement component u as a function of distance z for the RDPL and DPL models, with and without gravitational effects, at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5$$\end{document} is presented in Figure 1. The displacement decreases rapidly with increasing distance and tends to zero in the far field, indicating that the thermoelastic disturbance is localized near the surface. The RDPL model with gravity produces the largest displacement magnitude, whereas the DPL model gives smaller values. The negative displacement near the surface signifies contraction of the medium in the direction of wave propagation due to the combined influence of temperature-induced strain and the gravitational force. This behavior confirms that gravity enhances the mechanical response and that the refined phase-lag formulation intensifies the coupling among the elastic and thermal fields. Shown in Fig. 2 is the profile of the vertical displacement w versus z for both RDPL and DPL models, evaluated with and without gravitational effects at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5$$\end{document}. The gravity significantly amplifies the displacement near the surface, especially under the RDPL model, indicating that gravitational force increases the deformation response of the material. As z increases, the displacement gradually decreases, confirming that the influence of gravity weakens with depth due to internal elastic resistance. Figure 3 illustrates the distribution of T with z for the RDPL and DPL models under the influence of gravity at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5$$\end{document}. All curves exhibit a strong temperature peak near the surface followed by a smooth decay to zero, reflecting the rapid heat diffusion away from the heated boundary. The RDPL model predicts slightly higher temperature amplitudes than the DPL model in the presence of gravity, revealing that the refined formulation supports a stronger localized thermal field. The effect of gravity further modifies the temperature distribution by slightly increasing the near-surface temperature due to gravitational compression, thereby enhancing the thermal energy localization within the medium. Figure 4 illustrates the distribution of the micro-elongation scalar field \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document} verus the distance z for both RDPL and DPL theories under gravitational and non-gravitational conditions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5$$\end{document}. The results reveal that the presence of gravity leads to a larger micro-elongation near the surface, reflecting stronger internal stretching of the medium’s micro-particles. The RDPL model predicts a more pronounced micro-elongation response compared to the classical DPL model, emphasizing the role of refined phase-lag effects on microelongated behavior. Figure 5 shows the variation of the normal stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}$$\end{document} against z for the RDPL and DPL theories under gravity at the fractional order \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5.$$\end{document} The effect of gravity g is evident in the behavior, where the gravitational field acts as a body force, contributing to the redistribution of stresses inside the medium. Figure 6 illustrates the variation of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}$$\end{document} with z for the RDPL and DPL theories under gravity at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5$$\end{document}. The stress component \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}$$\end{document} measures the internal force per unit area acting in the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$z-$$\end{document}direction, which is directly affected by thermoelastic interactions. The presence of gravity g contributes to the development of compressive or tensile zones depending on the direction of deformation, thereby modifying the stress propagation . Figure 7 depicts the variation of the tangential stress \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document} with z for the RDPL and DPL theories under gravity at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =0.5.$$\end{document} The stress component reaches its maximum value near the surface where the thermal gradient is highest and then decays rapidly as z increases. The RDPL model with gravity produces the largest stress amplitude, confirming that the refined phase-lag approach more effectively captures the strong thermo-mechanical coupling between the displacement and temperature fields. The presence of gravity amplifies the stress due to the additional body force acting on the heated, expanding layers of the medium. The localized stress peak indicates that the most significant mechanical deformation occurs within the near-surface region, where the combined effects of heat conduction, gravity, and fractional behavior are dominant. Figures 1, 2, 3, 4, 5, 6 and 7 present results that are in very good agreement with those reported in42,49 within the framework of the DPL thermoelasticity theory. In those studies, the DPL model was extensively analyzed to describe thermoelastic wave propagation. The close consistency between the present results and the previously published findings serves to validate the adopted formulation, solution methodology, and numerical implementation of the DPL model in the current work. Figures 8, 9, 10, 11, 12, 13 and 14 are presented to highlight and analyze the changes in the aforementioned physical quantities under the RDPL model with gravitational effects \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(g = 9.8)$$\end{document} and different values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}. This visualization helps in understanding the effect of fractional-order on the system’s behavior. Fig. 1Effect of gravity on u. Fig. 2Effect of gravity on w. Fig. 3Effect of gravity on T. Fig. 4Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document}. Fig. 5Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}$$\end{document}. Fig. 6Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}$$\end{document}. Fig. 7Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document}. Fig. 8Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on u. Effect of gravity on u. Effect of gravity on w. Effect of gravity on T. Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document}. Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}$$\end{document}. Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}$$\end{document}. Effect of gravity on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document}. Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on u. The influence of varying the fractional-order \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document} at three distinct values on u is shown in Fig. 8. It is observed that u decrease with decreasing \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document} over \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0\le z\le 0.15$$\end{document}, while, in contrast to the increasing trend observed for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0.15\le z\le 0.5$$\end{document}. Figures 9 and 14 illustrate the influence of different values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document} on w and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document}. It is observed that the values of w and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document} increase with decreasing \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document} at the beginning of the distance z then, the opposite trend occurs at the end of z. Figures 10 and 11 show the impact of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document} on T and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document}. It is clarified that T and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document} decrease with increasing \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}. Figures 12 and 13 demonstrate the influence of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document} on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}$$\end{document}. It is noted that \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}$$\end{document} decrease with decreasing \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha .$$\end{document}Fig. 9Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on w.Fig. 10Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on T.Fig. 11Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document}.Fig. 12Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}$$\end{document}.Fig. 13Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}.$$\end{document}.Fig. 14Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document}. Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on w. Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on T. Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document}. Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}$$\end{document}. Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{zz}.$$\end{document}. Impact of different fractional order (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}) on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document}. Conclusion In this paper, the influence of gravity on wave propagation in micro-elongated thermoelastic media has been examined within the framework of the RDPL and DPL models incorporating the fractional conformable derivative. The governing field equations were formulated by considering both microelongation effects and the fractional order parameter. An analytical solution was obtained, and numerical simulations were performed to demenstrate the efffect of gravity, fractional order, and phase-lag parameters on the distributions of displacement, temperature, and stress components. The results demonstrate several important and novel findings. First, the gravitational field plays a pronounced role in modifying the amplitude and decay characteristics of all physical fields. Gravity amplifies both displacement components near the surface and creates measurable changes in stress distribution, especially in \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xx}, \sigma _{zz},$$\end{document} and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma _{xz}$$\end{document}. Second, the fractional conformable derivative introduces an additional degree of temporal flexibility, influencing thermal relaxation behavior and allowing for refined control of wave attenuation and localization. Third, the RDPL model predicts smoother, more realistic, and more stable thermal and mechanical responses when compared to the classical DPL formulation. It better captures the coupling between elastic, thermal, and micro-elongation fields, particularly under conditions of strong thermal gradients or significant gravity effects. Furthermore, the micro-elongation variable \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\psi$$\end{document} exhibits clear sensitivity to both fractional order and gravity, indicating that microelongated stretching mechanisms are strongly influenced by external body forces.