A chromosomal-level genome assembly of Thanatophilus sinuatus Fabricius (Coleoptera: Staphylinidae) Authors: Yingna Zhang, Liangliang Li, Shipeng Shao, Jianfeng Jin, Yu Wang, Ruixin Zhu Published: 2025 ABSTRACT AbstractThanatophilus sinuatus (Coleoptera: Staphylinidae), a widespread necrophagous beetle frequently recovered from remains, is critical for post-mortem interval estimation. The absence of a reference genome has limited molecular studies of its forensic traits. Here, we report the first high-quality, chromosome-level genome assembly of T. sinuatus, built using PacBio HiFi, Illumina, and Hi-C data. The 288.95 Mb genome has a scaffold N50 of 18.97 Mb, with 98.37% of sequence (284.24 Mb) anchored to 16 chromosomes. BUSCO analysis (Insecta, n = 1,367) reveals 98.6% completeness with 97.3% single-copy BUSCOs and 1.3% duplicated BUSCOs. Repetitive elements comprise 34.32% of the assembly, and 12,300 protein-coding genes were predicted. This high-quality genome provides a valuable genomic resource for elucidating Silphinae comparative genomics, the genetic mechanisms underlying traits of forensic interest.Subject terms: Genome evolution, Entomology, Molecular ecology Background & Summary Thanatophilus sinuatus (Fabricius 1775) (Coleoptera: Staphylinidae) is a diurnal carrion beetle in Silphinae1. Adults are black, dorsoventrally flattened, with a sculptured pronotum, ribbed elytra, and sexually dimorphic elytral apices. Thanatophilus sinuatus, widespread in Holarctic and Afrotropical realms2,3, is among the most abundant temperate carrion beetles4, colonizing meadows, grasslands, montane slopes, forests, and agricultural habitats, underscoring its generalist habitat preference1,5. Thanatophilus sinuatus, the predominant necrophagous Silphinae beetle6, could colonize corpses from early decomposition onward, thereby enhancing post-mortem interval (PMI) estimation and forensic utility7. Necrophagous insects perceive volatile organic compounds (VOCs) through olfaction and exhibit appropriate behavioral responses, such as carcasses localization, feeding preferences, mate selection, oviposition site selection, and breeding-site localization8–15. Studies of T. sinuatus immature morphology underpin precise instar and age determination7,16,17, while controlled experiments on diet, constant and fluctuating temperatures, photoperiod, population density, and geography elucidate their impacts on development, survival, and behavior2,4,17,18, collectively refining PMI estimates. Carrion beetles were traditionally classified as a separate family Silphidae7,19. Molecular phylogenetics now place Silphidae as a derived clade within Staphylinidae20–25. So T. sinuatus falls in Staphylinidae: Silphinae: Silphini: Silphina20,25,26. This revision indicates that large necrophagous silphines evolved from small rove-beetle ancestors, reflecting a major niche expansion20,25. Phylogenetic trees retain two monophyletic carrion-beetle lineages—Silphini and Nicrophorini—as sister groups closest to Tachyporinae, supporting a single origin of necrophagy in their common ancestor20,27. Thanatophilus clusters with other wide-bodied silphines (Silpha, Necrodes, Oiceoptoma) and appears to be a coherent lineage distinct from Nicrophorine, earlier taxonomy chiefly addressed regional synonyms3,27. Thanatophilus sinuatus and allied Silphinae illuminate the early evolution of carrion feeding in beetles. Most species feed on carrion and opportunistically on other insects7,28. Molecular evidence suggests that modern Silphinae evolved from rove-beetle ancestors that shifted to necrophagy early, with T. sinuatus exemplifying this shift25. Thanatophilus sinuatus can reach corpses rapidly and rivals fly larvae in decomposition7, representing a separate evolutionary experiment in utilizing large vertebrate carcasses. Investigating T. sinuatus illuminates convergent necrophilic evolution and key carrion adaptations: refined chemosensation; predatory removal of fly larvae that mitigates competition; detoxification of carcass xenobiotics; and niche partitioning with T. rugosus, separated by colonisation sequence and carcass microhabitats5,7,29. Thanatophilus sinuatus is non-burying carrion beetle, unlike parental-care Nicrophorini. Silphini and Nicrophorini evolved contrasting carrion strategies: Silphini compete on exposed large carcasses, whereas Nicrophorini bury smaller ones. Molecular data place Silphinae’s split from other Staphylinidae in the mid-Cretaceous and show genus-level diversification by the late Cretaceous–early Cenozoic25. Thanatophilus sinuatus, occupying a robust node within Silphini, epitomises this ancient, widely dispersed lineage, whose persistence underscores necrophagic resilience. Consequently, Thanatophilus sinuatus is a key model for carrion-driven evolution, including parental-care origins and detoxification adaptations. Despite extensive ecological and forensic research on T. sinuatus, no chromosome-level genome assembly exists. Current data comprise mitochondrial COI, limited nuclear loci, and a few congeneric mitogenomes25,30,31. While informative for phylogenetics and identification, these markers cover only a tiny genomic fraction and lack information on nuclear genes and genomic architecture. Related taxa, such as Nicrophorus spp., have become emerging models for evolutionary genomics, with several species now having draft or chromosomal-level genomes. Notably, Nicrophorus vespilloides provided the first Silphinae genome, revealing DNA methylation and parental care-related genes32,33, while the 202.3 Mb genome of Nicrophorus investigator was assembled, scaffolded into 7 chromosomal pseudomolecules, and annotated with 11,046 protein-coding genes, advancing Silphinae genomic studies34. The lack of a reference genome for T. sinuatus, a key Silphinae model, has hindered genetic and evolutionary research, making it difficult to address questions about gene content, function, and adaptive evolution. A high-quality genome assembly of T. sinuatus would reveal genomic signatures of its divergent lifestyle and facilitate the study of gene family evolution, focusing on expansions or contractions linked to its necrophagous behavior, with comparisons to other Coleoptera to identify lineage-specific innovations35. It would also aid in understanding the molecular basis of traits such as carrion chemosensory receptors (odorant receptors, gustatory receptors), digestive enzymes, immune responses in microbe-rich environments, and detoxification of carcass xenobiotics, including pathways like tyrosine metabolism36, drug metabolism–cytochrome P45037, and ascorbate–aldarate metabolism38. Additionally, a chromosome-level T. sinuatus genome enables fine-scale Silphinae phylogenetics39, leveraging orthologous genes to reconstruct evolutionary history, sharpen Silphini–Nicrophorini placement, estimate divergence times, and illuminate carrion-beetle radiation and adaptation since the Mesozoic amid climatic and faunal shifts. Furthermore, a high-quality T. sinuatus genome will enable comparative genomics between burying and non-burying carrion beetles, refining Silphinae phylogeny and revealing genomic divergence among carrion-feeding strategies; chromosome-level comparisons with burying beetles will clarify structural shifts accompanying life-history divergence. A chromosome-level T. sinuatus genome will accelerate forensic entomology by enabling microsatellite and SNP discovery for population genetics, rapid life-stage identification via barcoding or SNP assays, instar determination from expression profiles, and dissection of genes governing development, colonization timing, and thermal tolerance, thereby refining PMI estimates. Moreover, it will serve as a reference for metagenomic or environmental DNA surveys to detect insect evidence on remains. Genome-wide markers from our assembly will enable population genomics across the broad range of T. sinuatus, quantifying gene flow, regional genetic structure, and demographic history. Comparative analyses (e.g., Western Europe versus East Asia) can uncover migration routes, local adaptation to climate or habitat, and potential cryptic lineages, while also supporting the forensic geographic sourcing of insect evidence3,5,17,40. A chromosome-level assembly preserves synteny and long-range linkage, enabling robust analyses of karyotype evolution, chromosomal rearrangements, and gene-family expansions, while improving gene prediction, regulatory-element discovery, and trait-locus anchoring. For necrophagous beetles, such continuity facilitates detection of carrion-adapted loci under selection across species and strengthens phylogenetic inference by leveraging thousands of orthologues instead of sparse markers. We propose a chromosome-level T. sinuatus genome assembly using PacBio HiFi, Illumina, and Hi-C data, annotated for repeats, non-coding RNAs, and protein-coding genes, advancing Silphinae comparative genomics, phylogenomics, ecology, evolution, and forensics. Methods Sample collection and preprocessing Approximately 20 pairs of T. sinuatus were collected in October 2023 from Tangshan, Hebei, China (39.83°N, 118.16°E). A closed laboratory colony was established and maintained for at least 12 consecutive generations without immigration, resulting in a reduction of population heterozygosity due to the founder bottleneck followed by genetic drift. A single adult male T. sinuatus was used for both DNA (PacBio, Hi-C and Illumina) and RNA sequencing. Muscle tissue, specifically from the pronotum and posterior abdomen, was extracted from the specimen. The tissue was rinsed in phosphate-buffered saline for 10 min to remove external contaminants, flash-frozen in liquid nitrogen for 20 min, and stored at −80 °C until extraction and sequencing. DNA extraction and library construction Genomic DNA was extracted using the Cetyltrimethylammonium Bromide (CTAB) protocol and used for both Illumina next-generation sequencing and PacBio HiFi library construction. The PacBio HiFi library (15 K insert) was constructed using the SMRTbell® Express Template Prep Kit 2.0 (Pacific Biosciences, PN 101-853-100) and run on the PacBio Sequel IIe platform. After quality control, DNA was sheared to 15 Kb using the Megaruptor system (Diagenode B06010001) and concentrated with AMPure® PB Beads (Pacific Biosciences 100-265-900). SMRTbell libraries were prepared following the protocol of the 2.0 kit, including steps for single-stranded overhang removal, DNA damage repair, end repair, A-tailing, adapter ligation, and enzymatic digestion. Fragment selection was performed using the SageELF (Sage Science ELF000) or BluePippin (Sage Science BLU0001) systems. For Illumina sequencing, short-read libraries (150 bp paired-end, 350 bp insert) were prepared with the TruSeq DNA PCR-free kit and sequenced on the Illumina NovaSeq 6000. RNA extraction and library construction RNA was extracted using the TRIzol™ Reagent kit (Thermo Fisher Scientific), and RNA libraries were constructed using the TruSeq RNA v2 kit, followed by sequencing on the Illumina NovaSeq 6000. Hi-C library construction Hi-C libraries were generated following the standard protocol41. Briefly, samples were cross-linked with 1% formaldehyde for 10 min at room temperature and quenched with 0.125 M glycine for 5 min. The cross-linked cells were lysed, and isolated nuclei were digested with 80 U of MboI (NEB, R0543L) at 37 °C for 4 hours. The digested DNA was labeled with biotin-14-dCTP (Invitrogen) and ligated with 4000 U of T4 DNA ligase (NEB) at 20 °C. After cross-link reversal, ligated DNA was extracted using the QIAamp DNA Mini Kit (Qiagen). Purified DNA was sheared to 300–500 bp, blunt-end repaired, A-tailed, and adaptor-ligated. Libraries were then purified through biotin-streptavidin pull-down and PCR amplification. Finally, Hi-C libraries were quantified and sequenced on the Illumina NovaSeq 6000 platform. Sequencing and data processing All library construction and sequencing were performed by Berry Genomics Corporation (Beijing, China). Raw sequencing data were processed using standard quality control and trimming protocols before downstream analysis. Sequencing data summary In total, 104.95 Gb of sequencing data were obtained: 19.74 Gb PacBio HiFi reads (60.31×), 45.70 Gb Hi-C reads (158.16×), 29.83 Gb Illumina reads (103.23 × ), and 9.68 Gb RNA-seq reads. PacBio HiFi reads had a scaffold N50 of 15.94 kb and an average length of 16.02 kb (Table 1). Table 1Statistics for the sequencing data used in the genome assembly of Thanatophilus sinuatus.LibrariesInsert sizes (bp)Clean data (Gb)Sequencing coverage (×)Illumina35029.83103.23PacBio Hi-Fi15 Kb19.7460.31Hi-C35045.70158.16RNA3509.68— Statistics for the sequencing data used in the genome assembly of Thanatophilus sinuatus. Genome assembly Raw Illumina paired-end reads were deduplicated with BBTools v38.8242 (the “clumpify.sh” script). and stringently trimmed with the “bbduk.sh” script, removing bases with quality scores <20, discarding reads <15 bp, clipping poly-A/G/C tails ≥10 bp, and error-correcting overlapping pairs. We assessed genome size, heterozygosity, and repetitive-sequence content in T. sinuatus using a genome-wide k-mer analysis with GenomeScope v2.043. The estimated genome size was 287.23 Mb, displaying a high heterozygosity rate (1.85%) (Fig. 1). Genomic survey of Thanatophilus sinuatus based on the 21-mer survey, performed using GenomeScope. PacBio HiFi data were assembled de novo using Hifiasm v0.16.144 in “aggressive” mode (with the parameter ‘-l 2’) for removing heterozygous sequences. As low-depth reads frequently represent contamination or erroneous sequences, the Hifiasm assembly retained only contig sequences with a sequencing depth greater than 10X. Residual heterozygous duplication was removed with Purge Dups v1.2.545 based on read-depth information from Minimap2 v2.446-mapped BAM files, with a haploid cutoff set at 70 for identifying contigs as haplotigs (“-s 70”). Hi-C reads were aligned to the purged assembly with Juicer v1.6.247, and chromosome scaffolding was performed in 3D-DNA v.18092248. Assembly breaks were manually inspected and corrected in Juicebox v.1.11.0847, after which the adjusted assembly was imported into 3D-DNA for final chromosome construction. Potential contaminants were screened with MMseqs2 v1349 against the NCBI nucleotide and UniVec databases and with blastn (BLAST + v2.11.020)50 against UniVec. Sequences showing >90% identity were removed; those with 80–90% identity were verified by online NCBI BLASTN analysis. The potential bacterial and human contaminant scaffolds were excluded. The resulting T. sinuatus assembly spans 288.95 Mb, comprising 111 contigs assembled into 28 scaffolds (GC = 32.49%) (Table 2). Contig and scaffold N50 sizes are 6.25 Mb and 18.97 Mb, respectively. In total, 98.37% of the sequence (284.24 Mb) is anchored to 16 chromosomes (Table 2; Fig. 2). Table 2Genome assembly statistics for Thanatophilus sinuatus.AssemblyTotal length (Mb)Number scaffolds/contigs (chromosomes)Scaffold/contig N50 length (Mb)GC (%)BUSCO (n = 1,367) (%)CDFMHifiasm987.21644/6444.10/4.1032.8899.990.80.00.1Purge_Dups359.25117/1245.80/5.8032.8599.01.50.20.83D-DNA359.29484/582 (16)17.37/4.7632.8598.61.30.11.3Final288.9528/111 (16)18.97/6.2532.4998.61.30.11.3C: complete BUSCOs; D: complete and duplicated BUSCOs; F: fragmented BUSCOs; M: missing BUSCOs. Genome assembly statistics for Thanatophilus sinuatus. C: complete BUSCOs; D: complete and duplicated BUSCOs; F: fragmented BUSCOs; M: missing BUSCOs. Genome-wide chromosomal heatmap of Thanatophilus sinuatus, with chromosomes in blue and contigs in green. Genome annotation A de novo repeat library for T. sinuatus was built with RepeatModeler v2.0.451 (option “-LTRStruct”), which leverages the structural characteristics of repetitive elements and de novo prediction methods. The library was merged with RepBase-2018102652 and Dfam 3.553 to create the final repeat set. Repeats were identified and soft-masked with RepeatMasker v.4.1.454 against this library, aligning the genome against the final repeat sequence library, revealing that 34.32% of the genome is repetitive: unclassified (9.58%), DNA transposons (10.47%), LINEs (4.61%), simple repeats (8.41%), LTRs (0.42%), and others (Table 3). Table 3Genome assembly and annotation statistics of Thanatophilus sinuatus.CharacteristicsT. sinuatusGenome assemblyGenome Size (Mb)288.95Number of scaffolds28Number of chromosomes16Scaffold N50 length (Mb)18.97GC (%)32.49BUSCO completeness (%)98.6Protein-coding genesNumber12,300Mean gene length (bp)9,358.8BUSCO completeness (%)98.8Repetitive elementsSize (Mb)99.16 (34.32%)DNA transposons (Mb)30.38 (10.47%)SINEs (Mb)0.30 (0.10%)LINEs (Mb)13.36 (4.61%)LTRs (Mb)1.26 (0.42%)Unclassified (Mb)53.06 (11.70%)ncRNANumber of ncRNA1755rRNA546miRNA59snRNA116tRNA650 Genome assembly and annotation statistics of Thanatophilus sinuatus. Non-coding RNAs (ncRNAs) were detected with Infernal v1.1.455 against Rfam v14.10 database56, and transfer RNAs (tRNAs) with tRNAscan-SE v2.0.957. In total, 1,755 ncRNAs were annotated: 546 rRNAs, 650 tRNAs, 59 microRNAs, 116 small nuclear RNAs and 3 ribozymes (Table 3). Protein-coding gene annotation was analyzed by MAKER v3.01.0358 from transcribed RNA, ab initio gene predictions, and homologous proteins. Transcribed RNA reads were aligned with HISAT2 v2.2.059 and assembled genome-guided with StringTie v2.1.660. Ab initio training used BRAKER v2.1.661 (GeneMark-ES/ET/EP 4.68_3.60_lic62 and Augustus v3.3.463) informed by RNA sequence alignments and arthropod reference protein sequences from the OrthoDB10 v1 database64. Protein homology and intron position conservation were incorporated via GeMoMa v1.965 (parameters “GeMoMa.c = 0.4”, “GeMoMa.p = 10”) using five reference genomes (Drosophila melanogaster (GCF_000001215.4)66, Nicrophorus vespilloides (GCA_001412225.1)32, Tribolium castaneum (GCF_000002335.3)67, Apis mellifera (GCF_003254395.2)68, and Bombyx mori (GCF_014905235.1)69. BRAKER and GeMoMa outputs served as ab initio evidence for MAKER. The final annotation comprises 12,300 protein-coding genes (mean length = 9,358.8 bp) containing, on average, 6.2 exons and 5.1 introns (mean exon 314.7 bp; intron 1,515.2 bp; CDS 269.5 bp) (Table 4). The completeness of the protein sequences was evaluated using BUSCO, yielding a high score of 98.8% (n = 1,367). This included 84.4% (1,154) single-copy, 14.4% (197) duplicated, 0.1% (1) fragmented, and 1.1% (15) missing BUSCOs, reflecting high-quality predictions. Table 4Genome and functional annotation results of Thanatophilus sinuatus.CharacteristicsT. sinuatusStructure annotation Number of protein-coding genes12,300 Number of predicted protein sequences15,562 Mean protein length (aa)574.6 Mean gene length (bp)9,358.8 Gene ratio39.84% Number of exons per gene6.2 Mean exon length (bp)314.7 Exon ratio8.34% Number of CDSs per gene5.9 Mean CDS length (bp)269.5 CDS ratio6.88%Number of introns per gene5.1Mean intron length (bp)1515.2Intron ratio31.50%Function annotationNumber of genes matching Uniprot records11,191Number of genes labeled as “Uncharacterized protein”193Number of genes labeled as “unknown function”1,158Number of genes with InterProScan annotations10,138Number of genes with GO items from InterProScan annotations6,434Number of genes with eggNOG annotations10,914Number of genes with GO items from eggNOG annotations8,381Number of genes with Enzyme Codes (EC) from eggNOG annotations2,515Number of genes with KEGG ko terms from eggNOG annotations7,360Number of genes with KEGG pathway terms from eggNOG annotations4,498Number of genes with COG Functional Categories from eggNOG annotations10,234Number of genes with GO items (combining InterProScan and eggNOG results)9,409Number of genes with KEGG pathways items (combining InterProScan and eggNOG results)4,498 Genome and functional annotation results of Thanatophilus sinuatus. Gene functional annotation was queried against the UniProtKB database using Diamond v2.0.11.14970 in sensitive mode (parameters “–very-sensitive -e 1e-5”). Gene Ontology (GO) terms, KEGG/Reactome pathways and conserved protein sequences and domains were assigned with eggNOG-mapper v2.1.571 and InterProScan 5.53-87.072. The InterProScan analyses included four databases: Pfam73, SMART74, Superfamily75, and CDD76. Integrated function predictions yielded 10,234 COG categories, 6,434 GO terms, 7,360 KEGG ko terms, 4,498 KEGG pathways, and 2,515 Enzyme Codes(Table 4). Additionally, chromosome-scale distributions of repeat density, gene density and GC content were plotted with TBtool v1.09876977 (Fig. 3). Overview of Thanatophilus sinuatus genome features, showing (from outer to inner rings) chromosome length, gene density, GC content, transposable elements (DNA transposons, short interspersed nuclear elements [SINE], long interspersed nuclear elements [LINE], and long terminal repeats [LTR]), and simple repeats. Data Records Raw sequencing reads and the genome assembly of Thanatophilus sinuatus are publicly available at the National Center for Biotechnology Information (NCBI). The Hi-C, transcriptome, Illumina short-read, and PacBio HiFi datasets are archived under the SRA accessions SRR3426072378, SRR3426072479, SRR3426072580, and SRR3426072681. The assembled genome is deposited under GenBank accession GCA_051122355.182. The annotation results for repeated sequences, gene structure, and functional prediction have been deposited in figshare83. Technical Validation Assembly quality was appraised with two complementary metrics. First, BUSCO v5.0.4 (Insecta gene set, n = 1,367)84 recovered 98.6% of expected genes (97.3% single-copy BUSCOs, 1.3% duplicated BUSCOs, 0.1% fragmented BUSCOs, and 1.3% missing BUSCOs). Second, Minimap2/SAMtools read-back mapping showed alignment rates of 98.14% for PacBio HiFi reads and 93.59% for Illumina reads. These assessments collectively validate the high quality of the genome assembly generated in this study. Acknowledgements This study was supported by grants from the National Natural Science Foundation of China (grant numbers 82160323, 32270545, 32070508, 82002007, 82170542, and 92251307), the Major project of the National Natural Science Foundation of China (grant numbers 82293650 and 82293651), and the Open project of Hebei Key Laboratory of Forensic Medicine (grant number JYFY-23KF006). We gratefully acknowledge Mr. Hongwei Liu at Berry Genomics Corporation (Beijing, China) for providing technical assistance in this research. Author contributions R.Z. and Y.W. contributed to the research design. S.S. and L.L. collected the samples. J.J. and Y.Z. analyzed the data. Y.Z., Y.W. and J.J. wrote the draft manuscript and revised the manuscript. All co-authors contributed to this manuscript and approved it. Data availability This dataset has not been previously published or presented, and no conflicts of interest are declared. The raw sequencing reads and assembled genome of Thanatophilus sinuatus have been deposited in the NCBI under BioProject accession PRJNA1195369. Additionally, annotation files, including repeat elements, gene structures, and functional predictions, are available through Figshare (10.6084/m9.figshare.29511020). Code availability No specific script was employed in this study. All commands and data-processing pipelines followed the manuals and protocols of the respective bioinformatic software. Competing interests The authors declare no competing interests. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Contributor Information Yu Wang, Email: yuw@suda.edu.cn. Ruixin Zhu, Email: rxzhu@tongji.edu.cn. References Associated Data Data Citations Data Availability Statement This dataset has not been previously published or presented, and no conflicts of interest are declared. The raw sequencing reads and assembled genome of Thanatophilus sinuatus have been deposited in the NCBI under BioProject accession PRJNA1195369. Additionally, annotation files, including repeat elements, gene structures, and functional predictions, are available through Figshare (10.6084/m9.figshare.29511020). No specific script was employed in this study. All commands and data-processing pipelines followed the manuals and protocols of the respective bioinformatic software.