The Complete Chloroplast Genome and Morphological Data Support Reinstatement of Sedum jinianum (Crassulaceae) as an Independent Species Authors: Lang Shen, Hai‐Jun Ma, Lu‐Jing Wang, Wan‐Zeng Wang, Xiang Wang, Xiang‐Yang Sun, Hao‐Nan Zhang, Wei‐Qi Meng, Kun Liu Published: 2025 ABSTRACT ABSTRACT Sedum jinianum (Crassulaceae) has been treated as a synonym of S. bulbiferum , a widely distributed species in southern China, in Flora of China. However, critical observations on living plants in the wild revealed remarkable morphological distinctions between the two taxa. Sedum jinianum can be readily distinguished from S. bulbiferum by its alternate leaves, shape and size of leaves, and dark green bulbils. The plastomes of S. jinianum are 150,041–150,086 bp in length and exhibit a typical quadripartite structure. Phylogenetic analysis based on complete chloroplast genome data indicates that S. jinianum forms a monophyletic clade, sister to a well‐supported clade comprising four S. bulbiferum samples from geographically different populations. These findings support the reinstatement of S. jinianum as an independent species. Since the original holotype of S. jinianum could not be found in the ANUB, a neotype (L. Shen 240510 at ANUB) is designated here, along with an emended species description. Introduction Sedum jinianum Guo (1996) was described from Ningguo county in south Anhui province, China, with the designated holotype deposited at ANUB. In the protologue, the author stated that this species resembles S. bulbiferum Makino (1891) in that the lower leaves of the stem are short and small with a length of no more than 1 cm, the upper leaves are 1.5–3.5 cm long, linear‐spatulate or linear‐oblong‐lanceolate, the scales are obovate‐trapezoidal rectangles, the sepals are of unequal size, spatulate‐oblong‐lanceolate, 1–5 mm long, and the apex is slightly concave. However, Fu Kunjun (Fu Kun‐tsun) and Hideaki Ohba argued that S. jinianum lacked the original materials, and the protologue provided insufficient evidence to justify its recognition as a distinct species. Consequently, they treated it as a synonym of S. bulbiferum in Flora of China (Fu and Ohba 2001). Our critical observations on living plants in the wild indicated S. jinianum is morphologically remarkably different from S. bulbiferum by an array of characters. We conducted morphological comparisons and molecular phylogenetic analysis to elucidate that S. jinianum should be treated as an independent species. Materials and Methods Morphological Comparison Specimens and individual plants of S. jinianum from the wild populations were collected for morphological comparison. Some individuals from the wild were also transplanted and cultivated in the Botanical Garden, Anhui Normal University, Wuhu, for chloroplast genome analysis and further observation. Morphological observation was undertaken using more than 10 living individuals collected in the field or cultivated at the Botanical Garden. Phylogenetic Reconstruction Three representative individuals from different populations were selected for further molecular experiments, including one from Jingxian County, Xuancheng City (H. J. Ma 240423), one from Shitai County, Chizhou City (L. Shen 240510), and the other from Ningguo County, Xuancheng City (K. Liu 250401). Three individuals of S. bulbiferum from different populations were also included for plastome sequencing. Voucher specimens were deposited in the herbarium of Anhui Normal University (ANUB) (Table 1). Fresh leaves of these individuals were collected and sent to the sequencing company along with ice packs for Next‐generation sequencing (NGS). About 4 GB of raw data for each individual was generated. Chloroplast assembly tests were performed with the most commonly used chloroplast assembly software, Getorganelle (Jin et al. 2020) respectively (Getorganelle tests the K‐mer setup: 21, 25, 39, 45, 51, 65, 85, 105, 121, 127). Using the online tool GeSeq (https://chlorobox.mpimp‐golm.mpg.de/geseq.html) (Tillich et al. 2017) annotated the assembly results (annotated reference genome: S. bulbiferum NC_065835). An online website Chloroplot (https://irscope.shinyapps.io/Chloroplot/) (Zheng et al. 2020) was used to draw the circular map of the complete chloroplast genome. TABLE 1Origins and vouchers of six newly sequenced Sedum.OrderSpeciesLocalities (voucher)CoordinatesAltitude (m)Voucher specimenGenBank1S. jinianumMifengdong scenic spot, Maolin Town, Jing County, Xuancheng City, Anhui Province30.423903° N/118.341850° E355H. J. Ma 240,423PQ8776852S. jinianumQiupu river scenic area, Qidu Town, Shitai County, Chizhou City, Anhui Province30.214251° N/117.448037° E280L. Shen 240,510PQ8776863S. jinianumTaohuayuan, Fangtang Town, Ningguo City, Xuancheng City, Anhui Province30.560634° N/118.725672° E297K. Liu 250,401PV6564444 S. bulbiferum Taohuayuan, Fangtang Town, Ningguo City, Xuancheng City, Anhui Province30.560633° N/118.725672° E297K. Liu 250,402PV6564455 S. bulbiferum Qizhangya scenic spot, Nanhe Town, Yingshan County, Huanggang City, Hubei Province30.553046° N/115.669351° E272K. Liu 250,203PV6564466 S. bulbiferum Anhui Normal University, Yijiang District, Wuhu City, Anhui Province31.290727° N/118.388612° E9L. Shen 250,403PV656447 Origins and vouchers of six newly sequenced Sedum. In order to explore the phylogenetic position of S. jinianum in Sedum, chloroplast genome sequences of 19 accessions representing 15 Sedum taxa and three outgroup species ( Phedimus aizoon , Sinocrassula densirosulata, Hylotelephium spectabile ) were downloaded from the Genbank public database at the National Center for Biotechnology Information (NCBI). The sequences were aligned using MAFFT v.7.402 (Katoh and Standley 2014) and then adjusted manually. The phylogenetic tree was constructed using IQ‐Tree v.2.0.3 (Nguyen et al. 2015) by executing 5000 replicates of SH approximate likelihood ratio test (SH‐aLRT) and ultrafast bootstrap (UFBS) (Hoang et al. 2018). Finally, the tree file was visualized by the online tool of Interactive Tree Of Life (iTOL) v5 (Letunic and Bork 2021). Simple Sequence Repeat (SSR) Analysis SSRs were identified using the Misa‐web‐IPK Gatersleben online platform (https://webblast.ipk‐gatersleben.de/misa/). We detected mono‐, di‐, tri‐, tetra‐, penta‐, and hexanucleotide repeats among three S. jinianum and three S. bulbiferum accessions, with minimum repeat thresholds set to 10, 5, 4, 3, 3, and 3 units, respectively. Non‐Synonymous (KA ) and Synonymous (KS ) Substitution Rate Analysis (KA /KS ) We estimated the relative rates of sequence divergence in both S. jinianum and S. bulbiferum using KaKs_Calculator v2.0 (Wang et al. 2010) with the chloroplast genome of Phedimus aizoon as a reference. The same individual functional protein‐coding exons were extracted for calculating the synonymous (KS) and non‐synonymous (KA) substitution rates. Single Nucleotide Polymorphism (SNP) Analysis Chloroplast genome data of the three S. jinianum accessions aligned in FASTA format were uploaded to the Galaxy platform (https://usegalaxy.org/), using S. bulbiferum as the reference. SNP sites were identified and their genomic positions were extracted using bcftools query. Results and Discussion Morphology Morphologically, although they both have bulbils, Sedum jinianum can be easily distinguished from S. bulbiferum by its dark green and incurved bulbils (vs. green and slightly incurved), alternate leaves (vs. proximal stem leaves opposite, distal stem leaves alternate), short pedicels at primary branches and secondary branches (vs. almost sessile) (Table 2). Furthermore, the leaves of S. jinianum are usually longer than those of S. bulbiferum (1.5–3.0 cm vs. 1.0–1.5 cm), the sepals are usually wider (1–3 mm vs. 1–1.2 mm), and branches with 1 to 4 (vs. long, unbranched stems) (Table 2). TABLE 2Morphological comparison of Sedum jinianum and S. bulbiferum .Characters S. jinianum S. bulbiferum Rosette leaves during florescenceAbsentAbsentSterile stemAbsentAbsentFertile stemSolitary, purple red and ribbedClustered, purple‐red or slightly red and smoothLeaf bladeSpatulate or obovateOvate‐spatulatePhyllotaxyAlternateProximal stem leaves opposite, distal stem leaves alternateLeaf size (cm)(1.5–3.0) × (0.4–0.7)(1.0–1.5) × (0.2–0.4)RhizomeAbsentShort, prostratePedicelShort pedicels at primary branches and secondary branchesAlmost sessileAnther colorBrownish yellowYellowSepalsLanceolate, 5–6 × 1–1.5 mm, spurredLanceolate‐oblanceolate, 3–4 × 1–1.2 mm, spurredBulbilDark green and incurvedGreen and slightly incurvedFlowering stageMarch–AprilApril–MayFruit stageApril–MayMay–June Morphological comparison of Sedum jinianum and S. bulbiferum . Phylogeny Based on Chloroplast Genome In recent years, phylogenies based on chloroplast genome data have served as key evidence for the species delimitation (Ding et al. 2024; Jiang et al. 2024). The chloroplast genomes of S. jinianum were about 150 kb in length, with a typical quadripartite structure consisting of a large single copy region and a small single copy region separated by two long inverted repeats (Figure 1). This structure is congruent with that of other published Sedum chloroplast genomes released in GenBank. Phylogenetically, S. jinianum is closely related to S. bulbiferum (Figure 2). The maximum likelihood (ML) tree inferred from complete plastomes strongly indicates S. jinianum as a distinct lineage; all three accessions formed a monophyletic clade (MLBS = 100%) as sister to a well‐supported clade comprising four S. bulbiferum samples from geographically distant populations (MLBS = 100%) (Figure 2). Plastome map of Sedum jinianum. Genes belonging to different functional groups are color‐coded. IR, inverted repeat; LSC, large single copy; SSC, small single copy. ML phylogenetic tree of 16 Sedum species based on the complete chloroplast genome dataset. Numbers beside the nodes are bootstrap values from the ML method. Note that samples of S. jinianum are marked in color. SSR Polymorphisms Using the MISA‐web, we detected 280 SSRs (length ≥ 10 bp) in the plastomes of the three S. jinianum and three S. bulbiferum accessions, with each accession harboring 46 to 47 SSRs (see Table S1). Mononucleotide repeats composed solely of A or T repeat units were the most abundant, accounting for approximately 83.6% of all SSRs. Notably, all mono‐ and dinucleotide repeats were exclusively composed of A/T units. Synonymous (KS ) and Non‐Synonymous (KA ) Substitution Rate Analysis The KA and KS values of the three S. jinianum accessions and three S. bulbiferum accessions ranged from 0.00122 to 1.08913 and from 0.00248 to 3.67531, respectively. The corresponding KA/KS values varied between 0.01153 and 1.07680 (see Table S2). The rpl2 gene showed the highest values for both KA and KS. In contrast, the lowest KA values were observed in psbD, while the lowest KS values were found in ndhB. Notably, the KA/KS ratios of ndhB sequences of all six accessions exceeded one, suggesting that positive selection may have driven beneficial variations in the ndhB gene of S. bulbiferum and S. jinianum compared to P. aizoon . SNP Analysis The results of SNP analysis showed that, compared with S. bulbiferum , the three S. jinianum accessions contained 106, 109, and 106 SNPs, respectively (see Table S3). The number of transitions (Ts) ranged from 47 to 56, while the number of transversions (Tv) ranged from 53 to 59 across these accessions. The vast majority of SNPs were located in intergenic regions, accounting for 77.4%, 77.1%, and 77.4% in the three S. jinianum accessions, respectively. In contrast, only 17.9% to 18.3% of SNPs were found in gene coding regions, and 4.6% to 4.7% were located in tRNA genes. Taxonomic Treatment Sedum jinianum X. H. Guo., Acta Bot. Yunnan. 18: 297. 1996. Figures 3, 4, 5 Habit and habitat of Sedum jinianum in Jing County. (A) habitat (PQ877685). (B, C) flowering individuals on barren stone habitat. (D, E) flowering individual (PQ877685). (F) juvenile individual. (G) an individual with many bulbils in flower stems. (H) An individual during the vegetative growth stage (PQ877685). (I) part of the flowering individuals in the cultivated environment. Sedum jinianum (PQ877685). (A) Flower. (B) Immature follicle. (C) Leaves. (D) Pedicel. (E) Bulbil. (F) Sepals. (G) Petals. (H) Glands. (I) Immature seeds. (J) Seeds. (K) The side of the bulblet of S. jinianum. (L) The front side of the bulblet of S. jinianum. (M) The side of the bulblet of S. bulbiferum (PV656447). (N) The front side of the bulblets of S. bulbiferum (PV656447). Neotype of Sedum jinianum X. H. Guo, L. Shen 240510 (ANUB). Type:—CHINA: Anhui: Xuancheng city, Ningguo County, Banqiao, alt. 300–600 m, 16, 5, 1994, Guo Xin‐Hu 94,054. (holotype ANUB (not seen); isotype KUN (not seen)). Diagnosis This species can be distinguished from its close relative S. bulbiferum by the presence of short pedicels on primary branches, dark green bulbils, alternate spoon‐shaped basal leaves, and lanceolate sepals (Table 2). Neotype CHINA. Anhui Province, Chizhou City, Shitai County, Qidu Town, on moist rocks, 117.757169° N, 30.268799° E, 318 m alt., 10 May 2024, L. Shen 240,510 (fl., Neotype ANUB!) (Figure 5). Description Biennial herb, glabrous. Roots fibrous. No sterile stems when flowering. Stems solitary, ridged, greenish, often with small purplish dots thus appearing more or less purplish, branched from above the base, 15–30 cm tall, 5–8 mm in diam. Leaves alternate, basal leaves spoon‐shaped, stem‐bearing leaves lanceolate, 15–30 mm long, 4–7 mm wide. Inflorescence in dense terminal cymes, usually 2–3 branched; sepals green, ovate and unequal in length, sepals will become larger after the petals fall off 3–7 mm long, 1–3 mm wide; flowers shortly pedicellate, the pedicels 3–15 mm at primary branches, pedicels of secondary branches 2–12 mm; petals yellow, lanceolate to lanceolate‐oblong, 5–6 × 1–1.5 mm, base connate for 0.1–0.2 mm; stamens 10, yellow, filiform, arranged in 2 whorls, anthers brownish yellow, long ellipsoid; nectar scales orange, spatulate‐quadrangular, 0.3–0.4 × 0.2–0.3 mm, apex obtusely truncate, carpels yellow green, erect, ovoid‐lanceolate, 1.5–2.6 mm long, 0.6–0.9 mm wide, base shortly connate; Seeds numerous, oblong, 0.6–0.8 mm, papillate. Phenology Flowering from late March to early April, fruiting from early May. Distribution and Habitat Sedum jinianum is widely distributed in southern Anhui (Figure 6). It grows on moist rocks at altitudes of 200–550 m. Distribution map of Sedum jinianum. Preliminary Conservation Status Sedum jinianum is very common in its type locality and southern regions of Anhui Province. Thus, the conservation status could be considered as Least Concern (LC), according to the IUCN Red List Criteria (IUCN Standards and Petitions Subcommittee 2022). Author Contributions Lang Shen: data curation (equal), formal analysis (equal), investigation (equal), software (equal), visualization (equal), writing – original draft (equal). Hai‐Jun Ma: data curation (equal), investigation (equal), resources (equal), writing – original draft (equal). Lu‐Jing Wang: data curation (equal), investigation (equal), resources (equal). Wan‐Zeng Wang: data curation (equal), investigation (equal). Xiang Wang: data curation (equal), investigation (equal). Xiang‐Yang Sun: data curation (equal), investigation (equal), resources (equal). Hao‐Nan Zhang: data curation (equal), methodology (equal), resources (equal). Wei‐Qi Meng: conceptualization (equal), methodology (equal), project administration (equal), writing – review and editing (equal). Kun Liu: conceptualization (equal), formal analysis (equal), investigation (equal), methodology (equal), project administration (equal), supervision (lead), writing – original draft (equal), writing – review and editing (equal). Funding This study was financially supported by the Provincial Project of Science Research for Colleges and Universities of Anhui Province of China (2023AH050150) and the National Natural Science Foundation of China (31400291). Conflicts of Interest The authors declare no conflicts of interest. Supporting information Table S1: Simple sequence repeat (SSR) distribution in the plastomes of three S. jinianum accessions and three S. bulbiferum accessions. Table S2: The KA, KS and KA/KS values of three S. jinianum accessions and three S. bulbiferum accessions. Table S3: Single Nucleotide Polymorphism (SNP) in the plastomes of three S. jinianum accessions.