Regio- and stereo-specific electrophilic addition of TeBr4 and ArylTeBr3 across terminal acetylene bonds
Authors: Puspendra Singh, Swami Nath Bharti, Andrew Duthie, Ray J. Butcher
Published: 2025
ABSTRACT
Despite their unique electronic properties and scope for use in applications including semiconductors, catalysis, materials science and medicine, organotellurium compounds remain underexplored. Hence, electrophilic addition reactions of TeBr4, C6H5TeBr3, 4-MeOC6H4TeBr3 and 1-C10H7TeBr3 with terminal acetylene bonds of RC CH (R = Me3C, C6H5, 4-MeC6H4) were performed, producing the respective (Z)-isomer of organotellurium(iv) derivatives [t-BuC(Br) CH]2TeBr2 (1), [(C6H5)-{t-BuC(Br)CH}]TeBr2 (2), [(4-MeOC6H4)-{t-Bu(C(Br)CH)}]TeBr2 (3), [(1-C10H7)-{t-BuC(Br)CH}]TeBr2 (4), [(4-MeOC6H4)-{C6H5C(Br)CH}]TeBr2 (5), [(1-C10H7)-{C6H5C(Br)CH}]TeBr2 (6), [(C6H5)-{4-MeC6H4C(Br)CH}]TeBr2 (7), [(4-MeOC6H4)-{4-MeC6H4C(Br)CH}]TeBr2 (8) and [(1-C10H7)-{4-CH3–C6H4C(Br)CH}]TeBr2 (9) in good yield. These derivatives were characterized by elemental analysis, 1H, 13C{1H} and 125Te{1H} NMR spectroscopic techniques. 1H NMR chemical shifts of the signals due to vinyl protons of compounds 1–4 are shifted ∼0.4 ppm up field due to the electronic effect of t-Bu group. Only one 125Te NMR signal is observed for all the derivatives. Among these compounds, 2 and 7 were also characterized by single crystal X-ray studies. The Br atom of the organotellurium(iv) derivatives is invariably involved, at least in the solid state through nonbonding and hydrogen bonding interactions. An intermolecular Te⋯Br nonbonding interaction gives rise to zero-dimensional supramolecular dimeric unit in the crystal lattice of 2 and 7.
Introduction
Electrophilic addition reaction of alkynes is a highly valuable method for preparing alkanes, haloalkanes, haloalkenes, aldehydes, ketones, cis-alkenes, and trans-alkenes, etc., due to the availability of loosely held π-electrons. This unique property of alkynes was first employed by Nicola Petraganani in the electrophilic addition reactions of TeCl4 with phenylacetylene and diphenylacetylene.1 Comasseto et al. have also demonstrated the addition reactions of arylTeCl3 with 1-alkynes to isolate organotellurium(iv) derivatives.2 The electrophilic addition reactions of TeBr4, arylTeBr3 and phenylTeI3 with a series of 1-alkynes, yielded the 1 : 1 addition products, respectively.3,4 The addition products formed can readily be reduced to β-bromo/iodovinyltellurides. Considering vinyl bromides are promising synthetic intermediates that can undergo many coupling reactions under the catalysis of transition metal complexes, the reaction assumes significance as it provides a stereoselective synthetic route to obtain β-bromovinyltellurides.5 The addition of tellurium(iv) tetra- or trihalides to terminal acetylenes was found to be highly regio- and stereoselective. A polar solvent, like methanol, that facilitates the formation of an intermediate telluronium ion, favored the anti-addition to afford the E-isomer. However, in a non-polar solvent like benzene, syn-addition reactions lead to Z-isomers via a four-membered cyclic transition state.6–8 Organotellurium(ii) bromides and iodides that have appreciably low electrophilicity owing to the presence of two lone pairs at the Te(ii) atom compared to their Te(iv) analogues have been demonstrated to undergo 1 : 1 addition reaction with terminal acetylenes and thus provide one-step access to β-halovinyltellurides in satisfactory yield.9,10 However, the regio- as well as stereo-selectivity of the addition reaction of Te(ii) reagents to a triple bond was found to be poor and appeared to depend upon the reaction temperature and nature of the organic substrate. Thus, while the addition of phenyl tellurium bromide to phenylacetylene and n-heptyne gives the tellurides with E-configuration as the primary product at reflux, it yields its Z-isomers along with small amounts of regioisomers. TeCl4 and arylTeCl3 (Aryl = 1-C10H7, 2,4,6-Me3C6H2, 4-MeOC6H4) can also be employed to add across the triple bond of 1-alkynes, RCCH (R = Ph, 4-MeC6H4, t-Bu), yielding the bis(2-chloro-2-phenylvinyl)tellurium dichloride or aryl(2-chloro-2-phenylvinyl)tellurium dichlorides, respectively.11 The addition reactions of arylTeBr3 with alkynes can be used to develop stereoselective synthesis of (Z)- or (E)-β-bromovinyl aryltellurium dibromides. Stereochemistry and the nature of the solvent were established in this report.12 The addition reactions of TeBr4, alkylTeBr3 and arylTeBr3 with terminal acetylenes can be employed to isolate the corresponding bis(β-bromovinyl)tellurium dibromides and (β-bromovinyl)organyl tellurium dibromides.13 Similarly, ferrocenylacetylene can also react with a series of organotellurium(iv) tribromide/triiodide, affording (Z)-products of ferrocenylacetylene fragment bearing organotellurium(iv) derivatives respectively.14 In 2015, Chauhan and co-workers demonstrated the hydrotelluration of acetylenic ester using Ar2Te2/NaBH4 (Ar = 2,4,6-Me3C6H2, 4-Me2NC6H4) in methanol, leading to a mixture of stereoisomers of methyl β-(aryltelluro)acrylates.15 Recently, addition of TeCl4 to phenyl propargyl ethers was reported via anti addition following anti-Markovnikov rule to isolate bicyclic organotellurium derivatives.16 In 2024 Junk and co-workers also demonstrated synthesis of 1,3-benzotellurazole derivatives from phenyl ureas and tellurium tetrachloride.17 In addition, the same research group isolated 2-arylbenzo-1,3-tellurazoles from bis(2-aminophenyl) ditelluride and aromatic aldehydes by oxidative cyclization.18 Simultaneously, a review documented the synthesis and chemical behavior of telluropyran and telluropyrylium derivatives.19 The synthesis, ambient condition isolation, and antioxidant properties of a nine coordinate copper complex of 4-dimethylaminopyridyltellurium compound has also been performed.20
Overall, organotellurium derivatives are generating significant interest due to their electronic properties and potential application in fields such as medicine, catalysis, and materials science. In light of this, we performed electrophilic addition reactions of TeBr4 with tert-butylacetylene to obtain [t-BuC(Br)CH]2TeBr2 (1) with 66% yield. Along with this, C6H5TeBr3, 4-MeOC6H4TeBr3 and 1-C10H7TeBr3 were also treated with terminal acetylene bonds of RCCH (R = Me3C, C6H5, 4-MeC6H4) to obtain the (Z)-isomer of unsymmetrical organotellurium(iv) derivatives, [(C6H5)-{t-BuC(Br)CH}]TeBr2 (2), [(4-MeOC6H4)-{t-Bu(C(Br)CH)}]TeBr2 (3), [(1-C10H7)-{t-BuC(Br)CH}]TeBr2 (4), [(4-MeOC6H4)-{C6H5C(Br)CH}]TeBr2 (5), [(1-C10H7)-{C6H5C(Br)CH}]TeBr2 (6), [(C6H5)-{4-MeC6H4C(Br)CH}]TeBr2 (7), [(4-MeOC6H4)-{4-MeC6H4C(Br)CH}]TeBr2 (8) and [(1-C10H7)-{4-MeC6H4C(Br)CH}]TeBr2 (9) respectively. Compounds 2 and 7 were also examined further by single-crystal X-ray studies (Scheme 1).
Synthesis of [t-BuC(Br)CH]2TeBr2 and [t-BuC(Br)CH]ArTeBr2.
Results and discussion
Phenyl, 4-tolyl and t-butylacetylenes undergo easy regio- and stereo-specific electrophilic addition reactions with TeBr4, C6H5TeBr3, 4-MeOC6H4TeBr3 and 1-C10H7TeBr3 under refluxed in toluene, giving compounds 1–9 as solid yellow powders after work-up. The isolated pale yellow crystalline solids are air-stable, fairly soluble in chloroform or dichloromethane but sparingly soluble in benzene, n-hexane and ethers. Characterization and structural studies of the new compounds, vide infra, indicate that 1,2-addition of Te–Br bonds of TeBr4 and more reactive equatorial Te–Br bonds of ArTeBr3 across a triple bond of 1-alkynes in toluene is regio- and stereospecific and proceeds via a concerted four-centered mechanism to give the (Z) isomer (Scheme 2).21
Plausible mechanism for the formation of [RC(Br)CH]ArTeBr2.
Spectroscopic studies
All the compounds are crystalline solids and sufficiently soluble in CDCl3 to obtain satisfactory NMR spectra. 1H NMR chemical shifts of the signals due to vinyl protons of compounds 1–4 are shifted ∼0.4 ppm up field due to electronic effects of the t-Bu group. The 1H NMR spectrum of compound 1 shows two singlets at 1.31 and 7.86 ppm for t-Bu and vinyl protons, respectively. The 1H NMR spectrum of 2 shows two singlets at 1.31 and 7.78 ppm for t-Bu and vinyl protons. Along with these singlets, we also observed two sets of multiplets at 7.50–7.55 and 8.25–8.28 ppm for phenyl protons. The 1H NMR spectrum of compound 3 shows three singlets at 1.30, 3.87 and 7.74 ppm for t-Bu, p-MeO and vinyl protons, respectively. Along with these singlets, two sets of doublets are also observed at 7.02–7.05 and 8.16–8.19 ppm for aryl protons with a coupling constant 9.0 Hz. The 1H NMR spectrum of compound 4 shows two singlets at 1.40 and 8.08 ppm for t-Bu and vinyl protons, respectively. Along with these singlets, three doublets and three multiplets are also observed for aryl protons with coupling constants 7.5 and 8.1 Hz. The 1H NMR spectrum of 5 shows two singlets at 3.84 and 8.16 ppm for p-CH3O and vinyl protons, respectively. Along with these singlets, in the aryl region we also observed to have two doublet of doublets with coupling constants 9.0 and 3.0 Hz and three multiplets. The 1H NMR spectrum of 6 shows a singlet at 8.45 ppm for the vinyl proton, three multiplets and three doublets with a coupling constant 8.1 Hz. The 1H NMR spectrum of 7 shows two singlets at 2.40 and 8.14 ppm for p-Me and vinyl protons, respectively. Along with these singlets, the aryl region shows two multiplets and a doublet with a coupling constant 9.6 Hz. The 1H NMR spectrum of 8 shows three singlets at 2.40, 3.88 and 8.10 ppm for p-Me, p-MeO and vinyl protons, respectively. Along with these singlets, four doublets are also observed with coupling constants of 8.1 and 9.0 Hz. The 1H NMR spectrum of 9 shows two singlets at 2.43 and 8.40 ppm for p-Me and vinyl protons, respectively. Along with these singlets, two multiples and four doublets are observed.
The 125Te{1H} NMR spectrum of compounds 1–9 exhibits a single resonance at 714.3, 795.2, 805.0, 697.7, 808.6, 759.4, 689.7, 811.4 and 706.3 ppm, respectively, suggesting their stability in the solution state. The observed 125Te{1H} NMR chemical shift in these compounds are very close to the reported 125Te{1H} NMR chemical shift for (1-C10H7)(t-BuCOCH2)TeCl2 (762.6 ppm), (2,4,6-Me3C6H2)(t-BuCOCH2)TeCl2 (814.5 ppm),22 (1-C10H7)(i-PrCOCH2)TeCl2 (760.1 ppm), (2,4,6-Me3C6H2)(i-PrCOCH2)TeCl2 (780.8 ppm),23 (2,4,6-Me3C6H2)(Et2NCOCH2)TeBr2 (745.0 ppm),24 (MeOCOCH2)2TeBr2, (748.0 ppm), (1-C10H7)(MeOCOCH2)TeBr2, (713.0 ppm) and (2,4,6-Me3C6H2)(MeOCOCH2)TeBr2 (721.0 ppm).25
Molecular and crystal structures of 2 and 7
The relevant individual crystals of compounds 2 and 7 suitable for X-ray studies were obtained by slow evaporation of their chloroform solutions at room temperature. Single-crystal X-ray data and structure refinement details are given in Table 1, while the hydrogen bonding interaction (HBIs) details are summarised in Table 2. ORTEP diagrams of 2 and 7 are depicted in Fig. 1 and 2, respectively. The crystal packing diagrams of their molecular structures are shown in Fig. S1–S2. Significant bond lengths and angles are depicted in the figure captions. Compound 2 crystallizes in monoclinic with P21/n space group and compound 7 crystallizes in triclinic with P1̄ space group. Crystal lattices of both compounds are centrosymmetric. In the case of 2, the asymmetric unit consists of one molecule, while in the case of 7, there are two crystallographically independent molecules. Though the crystal structure of 2 is free from any disorder, the vinyl Br atom in one of the molecules of 7 is four-fold disordered with positional occupancies of 0.38(3) for (Br3B), 0.39(3) for (Br3C), 0.09(3) for (Br3D), and 0.14(3) for (Br3E). The primary geometry around the Te(iv) atom in both compounds is pseudo-trigonal bipyramidal with one equatorial position occupied by a stereochemically active lone pair. The distorted geometries can also be confirmed with the observed tau parameters (τ) for 2 : 1.39 and for 7 : 1.37. Molecular structures of both compounds in the solid state contain the putative planar vinyl fragment, C(Br)CC(H)Te. The observed CC bond length of 1.316(4) Å for 2 and 1.3170(10), 1.325(13) Å for two independent molecules of 7 are comparable to the value (1.337 Å) in free ethylene. The ethylene fragment bound to the Te atom in both compounds displays (Z) stereochemistry. The observed intramolecular nonbonding interactions (NBIs) [Te⋯Br(3): 3.3734(11) for 2; Te(1)⋯Br(3A): 3.373(1) for molecule A and Te(2)⋯Br(3B): 3.427(8) Å for molecule B of 7] are longer than the Σrcov(Te,Br), 2.68 Å, and significantly shorter than Σrvdw(Te,Br), 4.04 Å.26 In the face of possible rotations about the Te–C bonds, the vinyl fragment, C(Br)CC(H)Te in both cases is orientated so that the bromine atom(s) are almost in the equatorial C–Te–C plane. Coplanarity together with near linearity of the Br⋯Te–C(trans) triad(s) (∠Br⋯Te–C(trans) ∼148°) make n → σ* orbital interaction feasible.27 The four-electron three-centre covalent bonding interaction, therefore, appears to be the major component of the attractive interaction between the lone pair-laden hypervalent Te(iv) and Br atoms.
Table 1Crystallographic data and structure refinement details for 2 and 727FormulaC12H15Br3TeC15H13Br3TeFormula weight526.57560.58Temperature (K)295(2)295(2)Wavelength, λ Å0.710730.71073Crystal systemMonoclinicTriclinicSpace group P21/n P1̄ a (Å)8.1805(3)8.1272(4) b (Å)19.8262(6)13.6069(6) c (Å)9.5995(3)17.3929(6) α (°)90106.777(3)° β (°)98.090(3)96.291(3) γ (°)90106.069(4) V (Å3)1541.43(9)1731.66(14) Z 44 ρ calcd (Mg m−3)2.2692.150Abs coeff. (mm−1)9.6818.625 F(000)9761040Crystal size (mm3)0.73 × 0.28 × 0.070.78 × 0.59 × 0.21 θ Range (°)3.07 to 40.961.65 to 26.32Index ranges−14 ≤ h ≤ 14−9 ≤ h ≤ 10−36 ≤ k ≤ 35−16 ≤ k ≤ 15−17 ≤ l ≤ 16−13 ≤ l ≤ 21Reflns collected19 65511 387Indep reflns9887 [R(int) = 0.0438]6769 [R(int) = 0.0448]Completeness to θ max (%)99.999.6Abs. correctionAnalyticalAnalyticalMax., min. transmission0.505, 0.0490.133, 0.009Data/restraints/params9887/0/1486769/61/377GoF (F2)1.0371.096Final R indices [I > 2σ(I)] R1 = 0.0517, wR2 = 0.0683 R1 = 0.0466, wR2 = 0.1244 R indices (all data) R1 = 0.1032, wR2 = 0.0833 R1 = 0.0517, wR2 = 0.1287Refinement methodFull-matrix least-squares on F2Larg. diff. peak/hole(e Å−3)1.811/−2.9541.184/−0.918
Crystallographic data and structure refinement details for 2 and 7
Table 2Hydrogen-bonds for 2 and 7 [Å and °]D–H⋯A d(D–H) d(H⋯A) d(D⋯A) (D–H⋯A)Symmetry2C2–H2A⋯Br10.933.095(0)3.717(3)125.81 + x, y, +zC3–H3A⋯Br20.933.049(0)3.609(3)120.41 − x, 1 − y, 1 − z7C8B–HBA⋯Br2B0.933.184(1)3.996(7)147.02 − x, 1 − y, 1 − zC14B–H14B⋯Br1A0.933.049(1)3.833(8)142.92 − x, 1 − y, 1 − zC15A–H15A⋯Br2B0.963.087(1)3.875(7)143.62 − x, 1 − y, 1 − z
Hydrogen-bonds for 2 and 7 [Å and °]
ORTEP diagram showing 30% probability displacement ellipsoids and crystallographic numbering scheme for 2. Selected bond distances (Å) and angles (°): Te–C(1): 2.125(3); Te–C(7): 2.099(3); C(8)–Br(3): 1.915(3); Te–Br(1): 2.7193(4); Te–Br(2): 2.6379(4); Te⋯Br(3): 3.3734(11); C(1)–Te⋯Br(3): 148.33(8); C(1)–Te–C(7): 93.13(11); Br(1)–Te–Br(2): 176.839(13); τ: 176.84–93.13/60 = 1.39.
ORTEP diagram showing 30% probability displacement ellipsoids and crystallographic numbering scheme for 7. Selected bond distances (Å) and angles (°): Molecule A: Te(1)–C(1A): 2.086(6); Te–C(10A): 2.1075(6); C(2A)–Br(3A): 1.906(6); Te(1)–Br(1A): 2.6375(8); Te(1)–Br(2A): 2.7123(7); Te(1)⋯Br(3A): 3.373(1); C(10A)–Te(1)⋯Br(3A): 150.51(18); C(1A)–Te(1)–C(10A): 97.6(2); Br(1A)–Te(1)–Br(2A): 176.19(2); τ: 176.19–97.6/60 = 1.31. Molecule B: Te(2)–C(1B): 2.075(6); Te(2)–C(10B): 2.113(7); C(2B)–Br(3B): 1.901(9); Te(2)–Br(1B): 2.6504(12); Te(2)–Br(2B): 2.7242(11); Te(2)⋯Br(3B): 3.427(8); C(10B)–Te(2)⋯Br(3B): 146.91(31); C(1B)–Te(2)–C(10B): 95.3(3); Br(1B)–Te(2)–Br(2B): 177.74(3); τ: 177.74–95.3/60 = 1.37.
Supramolecular aspects
The propensity exhibited by the central Te atom among organotellurium(iv) halides to achieve six-coordination via intra/intermolecular Te⋯A (A = an electron-rich p-block atom viz. O, N, Cl, Br, I) NBIs is well displayed in the crystal packings of 2 and 7 (Fig. S1–S2).28 In the crystal lattice of compounds 2 and 7, as well, the intermolecular reciprocatory Te⋯Br NBIs imparts six-coordination to Te(iv) atom with pseudo-octahedral geometry and results in the formation of centrosymmetric dimeric units (Fig. 3). The observed intermolecular NBIs [Te⋯Br(1): 3.604(0) for 2; Te(1)⋯Br(2B): 3.707(11) and Te(2)⋯Br(2A): 3.542(1) for 7] are longer than the Σrcov(Te,Br), 2.68 Å, and significantly shorter than Σrvdw(Te,Br), 4.04 Å.26 Linearity of the Br⋯Te–C(trans) triad(s) [∠C(7)–Te⋯Br(1): 166.98(8)° for 2 and C(1A)–Te(1)⋯Br(2B): 170.02(18) for molecule A and C(1B)–Te(2)⋯Br(2A): 175.64(18) for molecule B of 7] approaching to 180° to make n → σ* orbital interaction feasible.27 In compound 7, pairs of the independent molecules “A” and “B” form dimeric units through reciprocatory intermolecular Te⋯Br NBIs (Fig. 4). The crystal packing diagrams of 2 and 7, also sustained by numerous reciprocatory C–H⋯Br HBIs, give rise to a one-dimensional supramolecular self-assembly (Fig. S1 and S2).
Zero-dimensional supramolecular centrosymmetric dimeric unit sustained by Te⋯Br(lp) NBIs [Te⋯Br(1): 3.604(0); Te⋯Br(2): 3.542(1); Te⋯Br(3): 3.366(1) Å, C(1)–Te⋯Br(3): 148.33(8); C(7)–Te⋯Br(1): 166.98(8)°] in the crystal structure of 2.
Zero-dimensional supramolecular dimeric unit of molecules “A” and “B” of 7 in its crystal lattice realized through intermolecular Te⋯Br attractions. Centrosymmetric dimer sustained by Te⋯Br(lp) NBIs [Te(1)⋯Br(2B): 3.707(11); Te(2)⋯Br(2A): 3.542(1); Te(1)⋯Br(3A): 3.373(1); Te(2)⋯Br(3B): 3.427(8) Å, C(1A)–Te(1)⋯Br(2B): 170.02(18); C(10A)–Te(1)⋯Br(3A): 150.5(2); C(1B)–Te(2)⋯Br(2A): 175.64(18); C(10B)–Te(2)⋯Br(3B): 149.2(2)°].
Hirshfeld surface analysis
Hirshfeld surface (HS) analyses were carried out to gain deeper insight into the intermolecular interactions present in the crystal structure of complexes 2 and 7. The associated 2D fingerprint plots were generated using CrystalExplorer21.5 to demonstrate the relative contributions of all possible intermolecular HBIs and NBIs to the overall surface area (Fig. 5, for detailed breakdown see Fig. S3–S6). For the compounds under investigation, prominent red spots were observed near the Br atom in compounds 2 and 7, highlighting the key intermolecular interactions (Fig. 5). Among these interactions, the H⋯H and H⋯Br interactions are the most prominent, contributing 30.5–40.7%. The highest H⋯H (40.7%) and H⋯Br (39.8%) contribution is observed for complex 2 and complex 7, respectively, suggesting a densely packed structure. The H⋯Br interactions, arising from C–H⋯Br HBIs, with the highest value for complex 7 (39.8%). The C⋯H interactions represent the third significant contribution of 9.9% with complex 2 and 19.3%, with complex 7 exhibiting the highest proportion. These contacts are typically associated with C–H⋯π and C–H⋯C interactions. Along with these interactions Br⋯Br and Te⋯Br NBIs are also contributing. For compound 2, Br⋯Br (5.9%) Te⋯Br/Br⋯Te (3.6%) and H⋯Te/Te⋯H (2.0%) contacts (Fig. S3). In compound 7, the corresponding contributions are Br⋯Br (3.7%) and H⋯Te/Te⋯H (1.5%) contacts (Fig. S4). To gain deeper insight into the crystal structure of 7. Molecule A and B of compound 7 both separately studied with the help of HS analysis, revealed that the presence of Te⋯Br NBIs with 2.3% contacts (Fig. S5 and S6). These results are consistent with the observed packing features and highlight the role of non-covalent interactions in stabilizing the crystal structures (please see SI File for Fig. S3–S6).
Hirshfeld surfaces (mapped over dnorm). (a) Compound 2, (b) compound 7, (c) molecule A of compound 7, (d) molecule B of compound 7.
Experimental
General
All reactions were performed under dry nitrogen. The starting materials tert-butylacetylene, phenylacetylene, p-ethynyltoluene, TeBr4, bromine, bromobenzene, 4-bromoanisole, 1-bromonaphthalene, bromomesityl, THF, toluene and chloroform were purchased from Merck and Aldrich. The starting materials C6H5TeBr3,29,30 4-MeOC6H4TeBr3,29,30 and 1-C10H7TeBr3 (ref. 30) were prepared according to literature methods. Melting points were recorded in capillary tubes and are uncorrected. The 1H (300.13 MHz), 13C{1H} (125.77 MHz) and 125Te{1H} (157.86 MHz) NMR spectrum were recorded in CDCl3 on Bruker Avance 300 and 500 spectrometers. Chemical shifts cited were referenced to Me4Si (1H, 13C{1H}) and Me2Te (125Te). Elemental analyses were performed on a Carlo Erba model 1106 elemental analyzer.
Reaction of TeBr4 and ArTeBr3 with acetylenes
Compound 1 [t-BuC(Br)CH]2TeBr2
A solution of tert-butylacetylene (0.62 mL, 5 mmol) and TeBr4 (0.90 g, 2 mmol) in dry toluene (10 mL) was refluxed under stirring for 8 h. The completeness of the reaction was monitored through TLC, eluting with CHCl3 : CH3OH (9 : 1). The solvent was reduced to approximately one third under reduced pressure and petroleum ether 60–80 °C was added. The sticky mass so obtained, on trituration with petroleum ether (60–80 °C) afforded a light yellow solid. After decantation of the solvent, the solid was dissolved in chloroform and passed through a short silica column to remove elemental tellurium produced due to partial decomposition. The resulting filtrate was concentrated to give a yellow solid powder of 1. The solid was recrystallized from chloroform to give yellow needle-shaped crystals of 1. Yield: (0.87 g, 66%); mp 193 °C (from CHCl3) (found: C, 23.24; H, 3.23. C12H20Br4Te requires C, 23.57; H, 3.30%); 1H NMR (ppm): 1.31 (9H, s, t-Bu), 7.86 (1H, s, vinyl). 13C{1H} NMR, (ppm): 29.18 (t-Bu), 42.4, 122.4, 156.3 (vinyl). 125Te{1H} NMR (ppm): δ 714.3.
Compound 2 [(C6H5)-{t-BuC(Br)CH}]TeBr2
Prepared from C6H5TeBr3 (0.89 g, 2.0 mmol) and tert-butylacetylene (0.62 mL, 5 mmol) at reflux, in a way similar to 1. Yield: (0.68 g, 65%); mp 125 °C (from CHCl3) (found: C, 27.42; H, 2.77. C12H15Br3Te requires C, 27.37; H, 2.87%); 1H NMR (ppm): 1.31 (9H, s, t-Bu), 7.50–7.55 (3H, m, aryl), 7.78 (1H, s, vinyl), 8.25–8.28 (2H, m, aryl). 13C{1H} NMR (ppm): 29.3 (t-Bu), 42.4, 126.0, 156.6 (vinyl), 130.4, 131.9, 135.0 (aryl). 125Te{1H} NMR (ppm): 795.2.
Compound 3 [(4-MeOC6H4)-{t-Bu(C(Br)CH)}]TeBr2
Prepared from 4-MeOC6H4TeBr3 (0.95 g, 2.0 mmol) and tert-butylacetylene (0.62 mL, 5 mmol) at reflux, in a way similar to 1. Yield: (0.67 g, 60%); mp 143 °C (from CHCl3) (found: C, 4, 28.10; H, 3.12. C13H17Br3OTe requires C, 28.05; H, 3.08%); 1H NMR (ppm): 1.30 (9H, s, t-Bu), 3.87 (3H, s, CH3O), 7.02–7.05 (2H, d J 9.0 Hz, aryl), 7.74 (1H, s, vinyl), 8.16–8.19 (2H, d J 9.0 Hz, aryl). 13C{1H} NMR (ppm): 29.2 (t-Bu), 42.3, 55.8 (CH3O), 116.1, 156.4 (vinyl), 119.2, 126.3, 136.8, 162.3 (aryl). 125Te{1H} NMR (ppm): 805.0.
Compound 4 [(1-C10H7)-{t-BuC(Br)CH}]TeBr2
Prepared from 1-C10H7TeBr3 (0.99 g, 2.0 mmol) and tert-butylacetylene (0.62 mL, 5 mmol) at reflux, in a way similar to 1. Yield: (0.83 g, 72%); mp 188 °C (from CHCl3) (found: C, 33.08; H, 2.89. C16H17Br3Te requires C, 33.33; H, 2.97%); 1H NMR (ppm): 1.40 (9H, s, t-Bu), 7.60–7.67 (2H, m, aryl), 7.69–7.74 (1H, m, aryl), 7.95–7.98 (1H, d J 8.1 Hz, aryl), 8.05–8.09 (2H, m, aryl), 8.27–8.30 (1H, d J 7.5 Hz, aryl), 8.08 (1H, s, vinyl), 8.27–8.30 (1H, d J 7.5 Hz, aryl). 13C{1H} NMR (ppm): 29.3 (t-Bu), 42.6, 124.1, 156.5 (vinyl), 126.9, 127.0, 127.6, 128.2, 129.6, 131.6, 132.8, 132.8, 134.7 (aryl). 125Te{1H} NMR (ppm): 697.7.
Compound 5 [(4-MeOC6H4)-{C6H5C(Br)CH}]TeBr2
Prepared from 4-MeOC6H4TeBr3 (0.95 g, 2.0 mmol) and phenylacetylene (0.55 mL, 5 mmol) at reflux in a way similar to 1. Yield: (0.90 g, 78%); mp 155 °C (from CHCl3) (found: C, 31.20; H, 2.28. C15H13Br3OTe requires C, 31.25; H, 2.27%); 1H NMR (ppm): 3.84 (3H, s, OMe), 7.02–7.08 (2H, dd J 9.0 Hz & 3.0 Hz, anisyl), 7.38–7.47 (3H, m, phenyl), 7.62–7.67 (2H, m, phenyl), 8.16 (1H, s, vinyl), 8.21–8.26 (2H, dd J 9.0 & 3.0 Hz, anisyl). 125Te{1H} NMR (ppm): 808.6.
Compound 6 [(1-C10H7)-{C6H5C(Br)CH}]TeBr2
Prepared from 1-C10H7TeBr3 (0.99 g, 2.0 mmol) and phenylacetylene (0.55 mL, 5 mmol) at reflux in a way similar to 1. Yield: (1.01 g, 84%); mp 183 °C (from CHCl3) (found: C, 36.24; H, 2.60. C18H13Br3Te requires C, 36.24; H, 2.20%); 1H NMR (ppm): 7.43–7.49 (3H, m, aryl), 7.62–7.67 (2H, m, aryl), 7.71–7.77 (3H, m, aryl), 7.96–7.99 (1H, d J 8.1 Hz, aryl), 8.08–8.10 (2H, d J 8.1 Hz, aryl), 8.37–8.40 (1H, d J 7.5 Hz, aryl), 8.45 (1H, s, vinyl). 13C{1H} NMR (ppm): 67.3, 123.6, 126.6, 126.7, 126.9, 127.4, 128.8, 129.5, 131.4, 131.5, 132.1, 132.8, 134.4, 134.5, 135.3, 135.9 (aryl), 192.1 (vinyl). 125Te{1H} NMR (ppm): 759.4.
Compound 7 [(C6H5)-{4-MeC6H4C(Br)CH}]TeBr2
Prepared from C6H5TeBr3 (0.89 g, 2.0 mmol) and p-ethynyltoluene (0.63 mL, 5 mmol) at reflux in a way similar to 1. Yield: (0.63 g, 56%); mp 77 °C (from CHCl3) (found: C, 31.98; H, 2.40. C15H13Br3Te requires C, 32.14; H, 2.34%); 1H NMR (ppm): 2.40 (3H, s, p-Me), 7.17–7.20 (2H, d J 9.6 Hz, m-tolyl), 7.52–7.57 (5H, m, phenyl), 8.14 (1H, s, vinyl), 8.30–8.33 (2H, m, o-tolyl). 13C{1H} NMR (ppm): 21.6 (p-Me), 125.3, 128.3, 129.6, 130.5, 132.0, 133.6, 135.0, 141.1(aryl), 142.2, (vinyl). 125Te{1H} NMR (ppm): 689.7.
Compound 8 [(4-MeOC6H4)-{4-MeC6H4C(Br)CH}]TeBr2
Prepared from 4-MeOC6H4TeBr3 (0.95 g, 2.0 mmol) and p-ethynyltoluene (0.63 mL, 5 mmol) at reflux in a way similar to 1. Yield: (0.91 g, 77%); mp 156 °C (from CHCl3) (found: C, 32.61; H, 2.60. C16H15Br3OTe requires C, 32.54; H, 2.56%); 1H NMR (ppm): 2.40 (3H, s, p-Me), 3.88 (3H, s, MeO), 7.03–7.06 (2H, d J 9.0 Hz, o-anisyl), 7.19–7.22 (2H, d J 8.1 Hz, o-tolyl); 7.51–7.54 (2H, d J 8.1 Hz, m-tolyl), 8.10 (1H, s, vinyl), 8.22–8.24 (2H, d J 9.0 Hz, m-anisyl). 13C{1H} NMR (ppm): 21.6 (p-Me), 55.8 (p-MeO), 116.1, 125.8, 128.2, 129.6, 133.6, 136.8, 140.8, 142.1 (aryl), 162.4, (vinyl). 125Te{1H} NMR (ppm): 811.4.
Compound 9 [(1-C10H7)-{4-CH3–C6H4C(Br)CH}]TeBr2
Prepared from 1-C10H7TeCl3 (0.99 g, 2.0 mmol) and p-ethynyltoluene (0.63 mL, 5 mmol) at reflux in a way similar to 1. Yield: (0.78 g, 63%); mp 170 °C (from CHCl3) (found: C, 37.34; H, 2.53. C19H15Br3Te requires C, 37.37; H, 2.48%); 1H NMR (ppm): 2.43 (3H, s, p-Me), 7.24–7.26 (1H, d J 4.8 Hz, aryl), 7.60–7.67 (4H, m, aryl), 7.71–7.76 (1H, m, aryl), 7.96–7.98 (1H, d J 8.1 Hz, aryl), 8.07–8.09 (2H, d J 7.8 Hz, aryl), 8.36–8.39 (1H, d J 7.2 Hz, aryl), 8.40 (1H, s, vinyl). 13C{1H} NMR (ppm): 21.6 (p-Me), 123.4, 126.9, 127.0, 127.6, 128.2, 128.3, 129.7, 131.6, 132.9, 133.0, 133.9, 134.8, 141.0 (aryl) 142.2 (vinyl). 125Te{1H} NMR (ppm): 706.3.
Crystallography
A suitable-sized single crystal was selected using an optical microscope and attached on the top of a glass fiber for data collection. Intensity data of the molecules were recorded using MoKα (λ = 0.71073 Å) radiation on a Bruker SMART APEX diffractometer with a CCD area detector at 295(2) K. The data was integrated with SAINT software31 and an experimental absorption correction applied to the collected reflections with SADABS.32 The structure was confirmed by direct methods using SHELXTL and refined on F2 by the full-matrix least-squares procedure using the program SHELXL-2018.33 All non-hydrogen atoms were refined with anisotropic dislocation parameters, whereas all H atoms were positioned geometrically and refined with relative isotropic dislocation parameters. ORTEP and packing diagrams are generated with the ORTEP-3,34 and DIAMOND 3.2 programs, respectively.35 Hirshfeld surface (HS) analyses and associated 2D fingerprint plots were generated using CrystalExplorer21.5.36
Conclusions
In conclusion, we have developed the electrophilic addition reaction of the TeBr4 and aryltellurium tribromides C6H5TeBr3, 4-MeOC6H4TeBr3 and 1-C10H7TeBr3 with terminal acetylene bonds of RCCH (R = Me3C, C6H5, 4-MeC6H4), producing the respective (Z) isomer organotellurium(iv) derivatives 1–9. These derivatives were characterized by elemental analysis, 1H, 13C{1H} and 125Te{1H} NMR spectroscopic techniques. Only one 125Te NMR signal is observed for all the derivatives. Among these compounds, 2 and 7 were also characterized by single crystal X-ray studies.
Author contributions
Puspendra Singh: data curation, investigation, formal analysis, writing – original draft, Swami N. Bharti: methodology. Andrew Duthie: writing – review & editing. Ray J. Butcher: Single-crystal X-ray data and structure refinement.
Conflicts of interest
There are no conflicts to declare.
Supplementary Material