The genome sequence of the striped dolphin, Stenella coeruleoalba (Meyen, 1833) Authors: Nicholas J. Davison, Phillip A. Morin, Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team, Wellcome Sanger Institute Scientific Operations: Sequencing Operations, Wellcome Sanger Institute Tree of Life Core Informatics team, Tree of Life Core Informatics collective, Darwin Tree of Life Consortium, Peijun Zhang, Annabel Whibley, Takushi Kishida, Jayan Duminda M. Senevirathna Published: 2024 ABSTRACT We present a genome assembly from an individual male Stenella coeruleoalba (the striped dolphin; Chordata; Mammalia; Artiodactyla; Delphinidae). The genome sequence has a total length of 2,691.40 megabases. Most of the assembly is scaffolded into 23 chromosomal pseudomolecules, including the X and Y sex chromosomes. The mitochondrial genome has also been assembled and is 16.39 kilobases in length. Species taxonomy Eukaryota; Opisthokonta; Metazoa; Eumetazoa; Bilateria; Deuterostomia; Chordata; Craniata; Vertebrata; Gnathostomata; Teleostomi; Euteleostomi; Sarcopterygii; Dipnotetrapodomorpha; Tetrapoda; Amniota; Mammalia; Theria; Eutheria; Boreoeutheria; Laurasiatheria; Artiodactyla; Whippomorpha; Cetacea; Odontoceti; Delphinidae; Stenella; Stenella coeruleoalba (Meyen, 1833) (NCBI:txid9737). Background The striped dolphin ( Figure 1) is an abundant pelagic small dolphin, globally distributed in warm-temperate and tropical waters. Global abundance is estimated to be over 2 million, and it is the most abundant dolphin species in the Mediterranean Sea. They occur in groups from tens to hundreds of individuals, often associated with the continental shelf, convergence zones and upwelling areas, where they feed primarily on fish and squid ( Archer, 2018). Photograph of the Stenella coeruleoalba (mSteCoe1) specimen from which lung samples were taken for genome sequencing. Striped dolphins are currently considered of least concern globally by the IUCN Red List, but vulnerable in the Mediterranean Sea ( Braulik, 2019) (IUCNredlist.org, consulted 18 September, 2024), with potential impacts due to resource depletion (overfishing), invasive species and disease, pollution and climate change. They have been hunted historically, with harvest of up to 21,000 per year documented in the Japanese drive and harpoon fisheries of the 1940s and 1950s. Since the mid 1980’s, annual catches have been much smaller, below c. 1000/year. Directed takes and incidental catches continue at lower levels in some other regions ( Archer, 2018). The genome of the striped dolphin, Stenella coeruleoalba, was sequenced as part of the Darwin Tree of Life Project, a collaborative effort to sequence all named eukaryotic species in the Atlantic Archipelago of Britain and Ireland. Here we present a chromosomal-level genome sequence for Stenella coeruleoalba, based on a juvenile male specimen from Ardmair, Scotland, UK. Genome sequence report The genome of a juvenile Stenella coeruleoalba was sequenced using Pacific Biosciences single-molecule HiFi long reads, generating a total of 96.03 Gb (gigabases) from 11.74 million reads, providing an estimated 35-fold coverage. Primary assembly contigs were scaffolded with chromosome conformation Hi-C data, which produced 424.04 Gb from 2,808.20 million reads. Specimen and sequencing details are summarised in Table 1. Table 1. Specimen and sequencing data for Stenella coeruleoalba.Project information Study title Stenella coeruleoalba (striped dolphin) Umbrella BioProject PRJEB60665 Species Stenella coeruleoalba BioSample SAMEA111380539 NCBI taxonomy ID 9737Specimen information Technology ToLID BioSample accession Organism part PacBio long read sequencing mSteCoe1SAMEA111380547Lung Hi-C sequencing mSteCoe1SAMEA111380547Lung RNA sequencing mSteCoe1SAMEA111380547LungSequencing information Platform Run accession Read count Base count (Gb) Hi-C Illumina NovaSeq 6000 ERR110429652.81e+09424.04 PacBio Sequel IIe ERR110296842.94e+0624.88 PacBio Sequel IIe ERR110296862.84e+0622.05 PacBio Sequel IIe ERR110296832.97e+0624.51 PacBio Sequel IIe ERR110296853.00e+0624.59 RNA Illumina NovaSeq 6000 ERR118374795.79e+078.74 Specimen and sequencing data for Stenella coeruleoalba. Manual assembly curation corrected 48 missing joins or mis-joins and four haplotypic duplications, reducing the e scaffold number by 5.76%, and increasing the scaffold N50 by 16.74%. The final assembly has a total length of 2,691.40 Mb in 637 sequence scaffolds with a scaffold N50 of 105.3 Mb, and 993 gaps ( Table 2). The snail plot in Figure 2 provides a summary of the assembly statistics, while the distribution of assembly scaffolds on GC proportion and coverage is shown in Figure 3. The cumulative assembly plot in Figure 4 shows curves for subsets of scaffolds assigned to different phyla. Most (89.38%) of the assembly sequence was assigned to 23 chromosomal-level scaffolds, representing 21 autosomes and the X and Y sex chromosomes. Chromosome-scale scaffolds confirmed by the Hi-C data are named in order of size ( Figure 5; Table 3). The order and orientation of contigs in the following regions is uncertain: Chromosome 6, 20 Mb to 33 Mb and Chromosome 4, 87 Mb to 99 Mb. While not fully phased, the assembly deposited is of one haplotype. Contigs corresponding to the second haplotype have also been deposited. The mitochondrial genome was also assembled and can be found as a contig within the multifasta file of the genome submission. Table 2. Genome assembly data for Stenella coeruleoalba, mSteCoe1.1.Genome assemblyAssembly namemSteCoe1.1Assembly accessionGCA_951394435.1 Accession of alternate haplotype GCA_951394445.1 Span (Mb)2,691.40Number of contigs1,631Number of scaffolds637Longest scaffold (Mb)190.17Assembly metrics * Benchmark Contig N50 length (Mb)3.6 ≥ 1 Mb Scaffold N50 length (Mb)105.3 = chromosome N50 Consensus quality (QV)65.7 ≥ 40 k-mer completeness99.49% ≥ 95% BUSCO v5.4.3 lineage: eutheria_odb10C:93.8%[S:91.8%,D:2.0%], F:1.1%,M:5.1%,n:11,366 S > 90%, D < 5% Percentage of assembly mapped to chromosomes89.38% ≥ 90% Sex chromosomesXY localised homologous pairs OrganellesMitochondrial genome: 16.39 kb complete single alleles * Assembly metric benchmarks are adapted from Rhie et al. (2021) and the Earth BioGenome Project Report on Assembly Standards September 2024.** BUSCO scores based on the cetartiodactyla_odb10 BUSCO set using version 5.3.2. C = complete [S = single copy, D = duplicated], F = fragmented, M = missing, n = number of orthologues in comparison. A full set of BUSCO scores is available at https://blobtoolkit.genomehubs.org/view/mSteCoe1_1/dataset/mSteCoe1_1/busco. Genome assembly data for Stenella coeruleoalba, mSteCoe1.1. * Assembly metric benchmarks are adapted from Rhie et al. (2021) and the Earth BioGenome Project Report on Assembly Standards September 2024. ** BUSCO scores based on the cetartiodactyla_odb10 BUSCO set using version 5.3.2. C = complete [S = single copy, D = duplicated], F = fragmented, M = missing, n = number of orthologues in comparison. A full set of BUSCO scores is available at https://blobtoolkit.genomehubs.org/view/mSteCoe1_1/dataset/mSteCoe1_1/busco. Genome assembly of Stenella coeruleoalba, mSteCoe1.1: metrics. The BlobToolKit snail plot provides an overview of assembly metrics and BUSCO gene completeness. The circumference represents the length of the whole genome sequence, and the main plot is divided into 1,000 equal-sized bins around the circumference. The outermost blue tracks display the distribution of GC, AT, and N percentages across the bins. Scaffolds are arranged clockwise from longest to shortest and are depicted in dark grey. The longest scaffold is indicated by the red arc, and the deeper orange and pale orange arcs represent the N50 and N90 lengths. A light grey spiral at the centre shows the cumulative scaffold count on a logarithmic scale. A summary of complete, fragmented, duplicated and missing BUSCO genes in the cetartiodactyla_odb10 set is shown in the top right. An interactive version of this figure is available at https://blobtoolkit.genomehubs.org/view/mSteCoe1_1/dataset/mSteCoe1_1/snail. Genome assembly of Stenella coeruleoalba, mSteCoe1.1: BlobToolKit GC-coverage plot showing sequence coverage (vertical axis) and GC content (horizontal axis). The circles represent scaffolds, with the size proportional to scaffold length and the colour representing phylum membership. The histograms along the axes display the total length of sequences distributed across different levels of coverage and GC content. An interactive version of this figure is available at https://blobtoolkit.genomehubs.org/view/mSteCoe1_1/dataset/mSteCoe1_1/blob. Genome assembly of Stenella coeruleoalba mSteCoe1.1: BlobToolKit cumulative sequence plot. The grey line shows cumulative length for all sequences. Coloured lines show cumulative lengths of sequences assigned to each phylum using the buscogenes taxrule. An interactive version of this figure is available at https://blobtoolkit.genomehubs.org/view/mSteCoe1_1/dataset/mSteCoe1_1/cumulative. Genome assembly of Stenella coeruleoalba, mSteCoe1.1: Hi-C contact map of the mSteCoe1.1 assembly, visualised using HiGlass. Chromosomes are shown in order of size from left to right and top to bottom. An interactive version of this figure may be viewed at https://genome-note-higlass.tol.sanger.ac.uk/l/?d=JSau3UmkRBWH6DoMYo591Q. Table 3. Chromosomal pseudomolecules in the genome assembly of Stenella coeruleoalba, mSteCoe1.INSDC accessionNameLength (Mb)GC%OX596385.11190.1742.0OX596386.12182.6641.5OX596387.13174.3341.0OX596388.14150.0139.0OX596389.15144.6439.5OX596390.16128.0840.5OX596392.17123.1442.0OX596393.18111.2942.5OX596394.19105.2540.0OX596395.110105.0543.5OX596396.111101.9641.5OX596397.11290.5739.5OX596398.11390.1642.0OX596399.11489.8243.0OX596400.11588.3246.0OX596401.11685.7543.0OX596402.11780.9840.5OX596403.11878.1239.0OX596404.11961.547.0OX596405.12058.9645.5OX596406.12136.441.0OX596391.1X123.2540.0OX596407.1Y5.3641.5OX596408.1MT0.0239.0 Chromosomal pseudomolecules in the genome assembly of Stenella coeruleoalba, mSteCoe1. The final assembly has a Quality Value (QV) of 65.7 and k-mer completeness of 99.49% (combined haplotypes). BUSCO (v5.4.3) analysis using the eutheria_odb10 reference set ( n = 11,366) indicated a completeness score of 93.8% (single = 91.8%, duplicated = 2.0%). The assembly achieves the EBP reference standard of 6.8.65.7. Other quality metrics are given in Table 2. Metadata for specimens, BOLD barcode results, spectra estimates, sequencing runs, contaminants and pre-curation assembly statistics are given at https://links.tol.sanger.ac.uk/species/9737. Methods Sample acquisition A juvenile Stenella coeruleoalba (specimen ID SAN00002606, ToLID mSteCoe1) was collected from Ardmair, Scotland, UK (latitude 57.94, longitude –5.19) on 2022-01-28. The specimen was collected and identified by Nick Davison (Scottish Marine Animal Stranding Scheme, University of Glasgow) and a sample of lung was collected at necropsy and preserved by freezing at –80 °C. Nucleic acid extraction The workflow for high molecular weight (HMW) DNA extraction at the Wellcome Sanger Institute (WSI) Tree of Life Core Laboratory includes a sequence of core procedures: sample preparation and homogenisation, DNA extraction, fragmentation and purification. Detailed protocols are available on protocols.io ( Denton et al., 2023). In sample preparation, the mSteCoe1 sample was weighed and dissected on dry ice ( Jay et al., 2023). For sample homogenisation, lung tissue was cryogenically disrupted using the Covaris cryoPREP ® Automated Dry Pulverizer ( Narváez-Gómez et al., 2023). HMW DNA was extracted using the Manual MagAttract v1 protocol ( Strickland et al., 2023b). DNA was sheared into an average fragment size of 12–20 kb in a Megaruptor 3 system ( Todorovic et al., 2023). Sheared DNA was purified by solid-phase reversible immobilisation, using AMPure PB beads to eliminate shorter fragments and concentrate the DNA ( Strickland et al., 2023a). The concentration of the sheared and purified DNA was assessed using a Nanodrop spectrophotometer and Qubit Fluorometer using the Qubit dsDNA High Sensitivity Assay kit. Fragment size distribution was evaluated by pulsed-field electrophoresis on the FemtoPulse system. RNA was extracted from lung tissue of mSteCoe1 in the Tree of Life Laboratory at the WSI using the RNA Extraction: Automated MagMax™ mirVana protocol ( do Amaral et al., 2023). The RNA concentration was assessed using a Nanodrop spectrophotometer and a Qubit Fluorometer using the Qubit RNA Broad-Range Assay kit. Analysis of the integrity of the RNA was done using the Agilent RNA 6000 Pico Kit and Eukaryotic Total RNA assay. Library preparation and sequencing Pacific Biosciences HiFi circular consensus DNA sequencing libraries were constructed according to the manufacturers’ instructions. Poly(A) RNA-Seq libraries were constructed using the NEB Ultra II RNA Library Prep kit. DNA and RNA sequencing was performed by the Scientific Operations core at the WSI on Pacific Biosciences Sequel IIe (HiFi) and Illumina NovaSeq 6000 (RNA-Seq) instruments. Hi-C data were generated from the lung tissue of mSteCoe1, using the Arima-HiC v2 kit. In brief, frozen tissue (–80 °C) was fixed, and the DNA crosslinked using a TC buffer containing formaldehyde. The crosslinked DNA was then digested using a restriction enzyme master mix. The 5’-overhangs were then filled in and labelled with a biotinylated nucleotide and proximally ligated. The biotinylated DNA construct was fragmented to a fragment size of 400 to 600 bp using a Covaris E220 sonicator. The DNA was then enriched, barcoded, and amplified using the NEBNext Ultra II DNA Library Prep Kit, following manufacturers’ instructions. The Hi-C sequencing was performed using paired-end sequencing with a read length of 150 bp on an Illumina NovaSeq 6000 instrument. Genome assembly, curation and evaluation Assembly The HiFi reads were first assembled using Hifiasm ( Cheng et al., 2021) with the --primary option. Haplotypic duplications were identified and removed using purge_dups ( Guan et al., 2020). The Hi-C reads were mapped to the primary contigs using bwa-mem2 ( Vasimuddin et al., 2019). The contigs were further scaffolded using the provided Hi-C data ( Rao et al., 2014) in YaHS ( Zhou et al., 2023) using the --break option. The scaffolded assemblies were evaluated using Gfastats ( Formenti et al., 2022), BUSCO ( Manni et al., 2021) and MERQURY.FK ( Rhie et al., 2020). The mitochondrial genome was assembled using MitoHiFi ( Uliano-Silva et al., 2023), which runs MitoFinder ( Allio et al., 2020) and uses these annotations to select the final mitochondrial contig and to ensure the general quality of the sequence. Assembly curation The assembly was decontaminated using the Assembly Screen for Cobionts and Contaminants (ASCC) pipeline (article in preparation). Manual curation was primarily conducted using PretextView ( Harry, 2022), with additional insights provided by JBrowse2 ( Diesh et al., 2023) and HiGlass ( Kerpedjiev et al., 2018). Scaffolds were visually inspected and corrected as described by Howe et al. (2021). Any identified contamination, missed joins, and mis-joins were corrected, and duplicate sequences were tagged and removed. Sex chromosomes were identified based on read coverage statistics. The curation process is documented at https://gitlab.com/wtsi-grit/rapid-curation (article in preparation). Evaluation of the final assembly A Hi-C map for the final assembly was produced using bwa-mem2 ( Vasimuddin et al., 2019) in the Cooler file format ( Abdennur & Mirny, 2020). To assess the assembly metrics, the k-mer completeness and QV consensus quality values were calculated in Merqury ( Rhie et al., 2020). This work was done using the “sanger-tol/readmapping” ( Surana et al., 2023a) and “sanger-tol/genomenote” ( Surana et al., 2023b) pipelines. The genome readmapping pipelines were developed using the nf-core tooling ( Ewels et al., 2020), use MultiQC ( Ewels et al., 2016), and make extensive use of the Conda package manager, the Bioconda initiative ( Grüning et al., 2018), the Biocontainers infrastructure ( da Veiga Leprevost et al., 2017), and the Docker ( Merkel, 2014) and Singularity ( Kurtzer et al., 2017) containerisation solutions. The genome was also analysed within the BlobToolKit environment ( Challis et al., 2020) and BUSCO scores ( Manni et al., 2021) were calculated. Table 4 contains a list of relevant software tool versions and sources. Table 4. Software tools: versions and sources.Software toolVersionSourceBlobToolKit4.2.1 https://github.com/blobtoolkit/blobtoolkit BUSCO5.3.2 https://gitlab.com/ezlab/busco bwa-mem22.2.1 https://github.com/bwa-mem2/bwa-mem2 Cooler0.8.11 https://github.com/open2c/cooler Gfastats1.3.6 https://github.com/vgl-hub/gfastats Hifiasm 0.16.1-r375 https://github.com/chhylp123/hifiasm HiGlass1.11.6 https://github.com/higlass/higlass Merqury.FKd00d98157618f4e8d1a9 190026b19b471055b22e https://github.com/thegenemyers/MERQURY.FK MitoHiFi3 https://github.com/marcelauliano/MitoHiFi PretextView0.2 https://github.com/wtsi-hpag/PretextView purge_dups 1.2.5 https://github.com/dfguan/purge_dups sanger-tol/ascc- https://github.com/sanger-tol/ascc sanger-tol/ genomenotev1.0 https://github.com/sanger-tol/genomenote sanger-tol/ readmapping1.1.0 https://github.com/sanger-tol/readmapping/tree/1.1.0 Singularity3.9.0 https://github.com/sylabs/singularity YaHS1.2a https://github.com/c-zhou/yahs Software tools: versions and sources. Wellcome Sanger Institute – Legal and Governance The materials that have contributed to this genome note have been supplied by a Darwin Tree of Life Partner. The submission of materials by a Darwin Tree of Life Partner is subject to the ‘Darwin Tree of Life Project Sampling Code of Practice’, which can be found in full on the Darwin Tree of Life website here. By agreeing with and signing up to the Sampling Code of Practice, the Darwin Tree of Life Partner agrees they will meet the legal and ethical requirements and standards set out within this document in respect of all samples acquired for, and supplied to, the Darwin Tree of Life Project. Further, the Wellcome Sanger Institute employs a process whereby due diligence is carried out proportionate to the nature of the materials themselves, and the circumstances under which they have been/are to be collected and provided for use. The purpose of this is to address and mitigate any potential legal and/or ethical implications of receipt and use of the materials as part of the research project, and to ensure that in doing so we align with best practice wherever possible. The overarching areas of consideration are: • Ethical review of provenance and sourcing of the material • Legality of collection, transfer and use (national and international) Each transfer of samples is further undertaken according to a Research Collaboration Agreement or Material Transfer Agreement entered into by the Darwin Tree of Life Partner, Genome Research Limited (operating as the Wellcome Sanger Institute), and in some circumstances other Darwin Tree of Life collaborators. This article provides a detailed information of the genome sequence from a male striped dolphin. It was well designed and clearly documented. I only have some minor concerns on the writing: 1) Abstract: Artiodactyla suggest to replace with Cetacea. Otherwise, Cetartiodactyla is more suitable here than Artiodactyla. Also in the key words. 2) Abstract: "The genome sequence has a total..." should be "The assembled genome sequence ...." 3) Species taxonomy: I am not sure what is the basis for this taxonomy, anyway, please double check following my suggestion 1). 4) Background: Rewrite "The striped dolphin (Figure 1) is an abundant pelagic small dolphin, globally distributed in warm-temperate and tropical waters. Global abundance is estimated to be over 2 million, and it is the most abundant dolphin species in the Mediterranean Sea." to "The striped dolphin , Stenella coeruleoalba, (Figure 1) is an abundant pelagic small dolphin, globally distributed in warm-temperate and tropical waters. Global abundance is estimated to be over 2 million, and it is one of the most abundant dolphin species in the Mediterranean Sea." 5) Background: last section remove "Stenella coeruleoalba" 6) Table 2: the symbol ** is not marked in Table 2, please mark it. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Marine mammal research, Genomics I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. Davidson, Morin and colleagues report the genome sequence of the striped dolphin Stenella ceoruleoalba. The genome assembly is of good quality, with close to 90% of the contigs scaffolded into chromosome pseudomolecules using HiC evidence. The sample, sequencing and assembly metadata is well documented and uses current best-practice tools for assembly and evaluation. The generation of RNAseq data from the necroscopied individual is presented in Table 1 but does not feature in the report (an accompanying gene annotation has not been generated at the time of review). Please note that there is a discrepancy in the BUSCO version reported (version 5.3.2 is stated in Table 4 vs 5.4.3 in the Genome Report text). I would also have been interested to learn more about the putative causes of the reduced intensity of the Hi-C contact map signals for chromosome 7. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Genomics, Bioinformatics, Evolution I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. This study provides a high-quality chromosomal-level striped dolphin haploid genome assembly. I have no complaints about the quality of this genome data. However, I have some comments about the specimen. The authors do not provide a specimen voucher, but if possible, I strongly recommend that the authors deposit the specimen in an appropriate museum so that the genome data can be associated with morphological data. Otherwise, detailed morphological data, such as 3D scan data, would be appreciated. Are sufficient details of methods and materials provided to allow replication by others? Partly Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: genetics I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. The article is nicely written. However, some mistakes are are noticed as follows; - In abstract first sentence, a comma should be placed after the common name of the dolphin. - Scientific name should be italic in keywords - In Table 2, ** has not indicated in the table - In Table 3, second column should be Chromosome name/number - In assembly curation, if the the curation process article is still in preparation, maybe no need to mention. - use of RNA seq data has never been mentioned or the results. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Aquatic Biotechnology and Genetics I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard.