The genome sequence of a tachinid fly, Linnaemya vulpina (Fallén, 1810) Authors: Olga Sivell, Ryan Mitchell, Chris Raper, Natural History Museum Genome Acquisition Lab, Darwin Tree of Life Barcoding collective, Wellcome Sanger Institute Tree of Life Management, Samples and Laboratory team, Wellcome Sanger Institute Scientific Operations: Sequencing Operations, Wellcome Sanger Institute Tree of Life Core Informatics team, Tree of Life Core Informatics collective, Darwin Tree of Life Consortium, Henrique Antoniolli, Kyle M Benowitz Published: 2024 ABSTRACT We present a genome assembly from an individual male tachinid fly, Linnaemya vulpina (Arthropoda; Insecta; Diptera; Tachinidae). The genome sequence has a total length of 554.00 megabases. Most of the assembly (98.85%) is scaffolded into 7 chromosomal pseudomolecules, including the X and Y sex chromosomes. The mitochondrial genome has also been assembled and is 16.72 kilobases in length. Gene annotation of this assembly on Ensembl identified 11,599 protein-coding genes. Species taxonomy Eukaryota; Opisthokonta; Metazoa; Eumetazoa; Bilateria; Protostomia; Ecdysozoa; Panarthropoda; Arthropoda; Mandibulata; Pancrustacea; Hexapoda; Insecta; Dicondylia; Pterygota; Neoptera; Endopterygota; Diptera; Brachycera; Muscomorpha; Eremoneura; Cyclorrhapha; Schizophora; Calyptratae; Oestroidea; Tachinidae; Tachininae; Ernestiini; Linnaemya; Linnaemya vulpina (Fallén, 1810) (NCBI:txid1776471). Background Linnaemya vulpina is a large bristly fly from the family Tachinidae (Diptera), one of the largest fly families with 8,592 described species worldwide, and 151 valid species in the genus Linnaemya Robineau-Desvoidy, 1830 ( O’Hara et al., 2020). Linnaemya vulpina is one of five species in genus occurring in Britain ( Chandler, 2024). It can be identified using keys in Belshaw (1993), even though L. picta was not known from Britain at the time of publication, and is not included in the keys ( Bentley & Raper, 2010). Linnaemya vulpina can be distinguished by its orange femora, which are black in the other British species (including L. picta). It has a mostly orange abdomen with a fairly narrow central black stripe, less than a quarter of the width of the abdomen. In other species the medial stripe is broader and orange markings on the abdomen are less pronounced or absent ( Belshaw, 1993). Linnaemya vulpina is a Palaearctic species, widely distributed in Europe, and also occurring in Central Asia, China, Middle East, Western Russia, Western Siberia and Transcaucasia. It also occurs in the Oriental Region, in West China and Taiwan ( O’Hara et al., 2020). In Britain and Ireland, it is common and widely distributed and occurs in heathland ( Belshaw, 1993). The adults are on the wing from June to September, occasionally October ( NBN Trust, 2024). The larvae of Linnaemya parasitise caterpillars of Noctuidae species (Lepidoptera). An incubated egg is laid on a leaf. The highly sclerotised larva remains attached by the posterior end to its egg capsule, while making pendulum-like movements with its anterior end. It attaches itself to a free-living Lepidoptera larva passing by and bores into it ( Belshaw, 1993). In Britain Linnaemya vulpina was recorded from Lycophotia porphyrea (Denis & Schiffermüller, 1775) ( Ford, 1973; Ford, 1976; Ford & Shaw, 1991). The other reported hosts include Chilodes maritimus (Tauscher, 1806), Archanara geminipuncta (Haworth, 1809), Blepharita satura (Denis & Schiffermüller, 1775), Spodoptera littoralis (Boisduval, 1833) and Mythimna loreyi (Duponchel, 1827) ( Belshaw, 1993; Ingram, 1981; Parchami-Araghi, 1994; Sertkaya & Bayram, 2005). The high-quality genome of Linnaemya vulpina was sequenced from a single female (NHMUK015059114; SAMEA112964114) from Buxton Heath, England ( Figure 1). This will aid research on taxonomy and biology of the species and the phylogeny of the family Tachinidae. The genome was sequenced as part of the Darwin Tree of Life Project, a collaborative effort to sequence all named eukaryotic species in the Atlantic Archipelago of Britain and Ireland. Photographs of the Linnaemya vulpina (idLinVulp1) specimen used for genome sequencing. Genome sequence report The genome of Linnaemya vulpina was sequenced using Pacific Biosciences single-molecule HiFi long reads, generating a total of 74.84 Gb (gigabases) from 6.17 million reads, providing an estimated 150-fold coverage, based on the GenomeScope estimated genome size. Primary assembly contigs were scaffolded with chromosome conformation Hi-C data, which produced 127.35 Gb from 843.40 million reads. Specimen and sequencing details are summarised in Table 1. Table 1. Specimen and sequencing data for Linnaemya vulpina.Project information Study title Linnaemya vulpina Umbrella BioProject PRJEB64991 Species Linnaemya vulpina BioSample SAMEA112964114 NCBI taxonomy ID 1776471Specimen information Technology ToLID BioSample accession Organism part PacBio long read sequencing idLinVulp1SAMEA112975247Whole organism Hi-C sequencing idLinVulp1SAMEA112975247Whole organismSequencing information Platform Run accession Read count Base count (Gb) Hi-C Illumina NovaSeq 6000 ERR118375428.43e+08127.35 PacBio Revio ERR118434576.17e+0674.84 Specimen and sequencing data for Linnaemya vulpina. Assembly errors were corrected by manual curation, including 123 missing joins or mis-joins. This reduced the scaffold number by 68.46% and increased the scaffold N50 by 5.58%. The final assembly has a total length of 554.00 Mb in 46 sequence scaffolds, with 254 gaps, and a scaffold N50 of 89.0 Mb ( Table 2). Table 2. Genome assembly data for Linnaemya vulpina, idLinVulp1.1.Genome assemblyAssembly nameidLinVulp1.1Assembly accessionGCA_963675445.1 Accession of alternate haplotype GCA_963675385.1 Span (Mb)554.00Number of contigs301Number of scaffolds46Longest scaffold (Mb)119.29Assembly metrics * Benchmark Contig N50 length (Mb)5.7 ≥ 1 Mb Scaffold N50 length (Mb)89.0 = chromosome N50 Consensus quality (QV)60.8 ≥ 40 k-mer completeness100.0% ≥ 95% BUSCO ** C:97.8%[S:97.4%,D:0.4%], F:0.7%,M:1.5%,n:3,285 S > 90% D < 5% Percentage of assembly mapped to chromosomes98.85% ≥ 90% Sex chromosomesXY localised homologous pairs OrganellesMitochondrial genome: 16.72 kb complete single alleles Genome annotation of assembly GCA_963675445.1 at EnsemblNumber of protein-coding genes11,599Number of non-coding genes675Number of gene transcripts17,386* Assembly metric benchmarks are adapted from Rhie et al. (2021) and the Earth BioGenome Project Report on Assembly Standards September 2024.** BUSCO scores based on the diptera_odb10 BUSCO set using version 5.4.3. C = complete [S = single copy, D = duplicated], F = fragmented, M = missing, n = number of orthologues in comparison. Genome assembly data for Linnaemya vulpina, idLinVulp1.1. * Assembly metric benchmarks are adapted from Rhie et al. (2021) and the Earth BioGenome Project Report on Assembly Standards September 2024. ** BUSCO scores based on the diptera_odb10 BUSCO set using version 5.4.3. C = complete [S = single copy, D = duplicated], F = fragmented, M = missing, n = number of orthologues in comparison. The snail plot in Figure 2 provides a summary of the assembly statistics, indicating the distribution of scaffold lengths and other assembly metrics. Figure 3 shows the distribution of scaffolds by GC proportion and coverage, helping to distinguish between various genomic elements. Figure 4 presents a cumulative assembly plot, with separate curves representing different scaffold subsets assigned to various phyla, illustrating the completeness of the assembly. Genome assembly of Linnaemya vulpina, idLinVulp1.1: metrics. The BlobToolKit snail plot shows N50 metrics and BUSCO gene completeness. The main plot is divided into 1,000 size-ordered bins around the circumference with each bin representing 0.1% of the 554,043,072 bp assembly. The distribution of scaffold lengths is shown in dark grey with the plot radius scaled to the longest scaffold present in the assembly (119,288,928 bp, shown in red). Orange and pale-orange arcs show the N50 and N90 scaffold lengths (89,037,140 and 52,041,823 bp), respectively. The pale grey spiral shows the cumulative scaffold count on a log scale with white scale lines showing successive orders of magnitude. The blue and pale-blue area around the outside of the plot shows the distribution of GC, AT and N percentages in the same bins as the inner plot. A summary of complete, fragmented, duplicated and missing BUSCO genes in the diptera_odb10 set is shown in the top right. An interactive version of this figure is available at https://blobtoolkit.genomehubs.org/view/GCA_963675445.1/dataset/GCA_963675445.1/snail. Genome assembly of Linnaemya vulpina, idLinVulp1.1: BlobToolKit GC-coverage plot showing sequence coverage (vertical axis) and GC content (horizontal axis). The circles represent scaffolds, with the size proportional to scaffold length and the colour representing phylum membership. The histograms along the axes display the total length of sequences distributed across different levels of coverage and GC content. An interactive version of this figure is available at https://blobtoolkit.genomehubs.org/view/GCA_963675445.1/dataset/GCA_963675445.1/blob. Genome assembly of Linnaemya vulpina idLinVulp1.1: BlobToolKit cumulative sequence plot. The grey line shows cumulative length for all scaffolds. Coloured lines show cumulative lengths of scaffolds assigned to each phylum using the buscogenes taxrule. An interactive version of this figure is available at https://blobtoolkit.genomehubs.org/view/GCA_963675445.1/dataset/GCA_963675445.1/cumulative. Most (98.85%) of the assembly sequence was assigned to 7 chromosomal-level scaffolds, representing 5 autosomes and the X and Y sex chromosomes. These chromosome-level scaffolds, confirmed by the Hi-C data, are named in order of size ( Figure 5; Table 3). During manual curation it was noted that the order and orientation of the region of chromosome 1 between 46 Mb and 49 Mb is uncertain. Genome assembly of Linnaemya vulpina idLinVulp1.1: Hi-C contact map of the idLinVulp1.1 assembly, visualised using HiGlass. Chromosomes are shown in order of size from left to right and top to bottom. An interactive version of this figure may be viewed at https://genome-note-higlass.tol.sanger.ac.uk/l/?d=LrnFqNjHSvqToHXfO4uzyg. Table 3. Chromosomal pseudomolecules in the genome assembly of Linnaemya vulpina, idLinVulp1.INSDC accessionNameLength (Mb)GC%OY776276.11119.2931.5OY776277.12117.9531.0OY776278.1389.0431.0OY776279.1484.3331.0OY776280.1578.4531.0OY776281.1X52.0431.0OY776282.1Y6.2630.0OY776283.1MT0.0220.5 Chromosomal pseudomolecules in the genome assembly of Linnaemya vulpina, idLinVulp1. While not fully phased, the assembly deposited is of one haplotype. Contigs corresponding to the second haplotype have also been deposited. The mitochondrial genome was also assembled and can be found as a contig within the multifasta file of the genome submission, and as a separately fasta file with accession OY776283.1. The final assembly has a Quality Value (QV) of 60.8 and k-mer completeness of 100.0%. BUSCO (v5.4.3) analysis using the diptera_odb10 reference set ( n = 3,285) reported a completeness score of 97.8% (single = 97.4%, duplicated = 0.4%). Metadata for specimens, BOLD barcode results, spectra estimates, sequencing runs, contaminants and pre-curation assembly statistics are given at https://links.tol.sanger.ac.uk/species/1776471. Genome annotation report The Linnaemya vulpina genome assembly (GCA_963675445.1) was annotated at the European Bioinformatics Institute (EBI) on Ensembl Rapid Release. The resulting annotation includes 17,386 transcribed mRNAs from 11,599 protein-coding and 675 non-coding genes ( Table 2; https://rapid.ensembl.org/Linnaemya_vulpina_GCA_963675445.1/Info/Index). The average transcript length is 10,467.26. There are 1.42 coding transcripts per gene and 4.99 exons per transcript. Methods Sample acquisition and DNA barcoding A male adult specimen of Linnaemya vulpina (specimen ID NHMUK015059114, ToLID idLinVulp1) was collected from Buxton Heath, England, United Kingdom (latitude 52.75, longitude 1.22) on 2022-07-04. The specimen was collected by Olga Sivell (Natural History Museum) and identified by Ryan Mitchell (National Museums Northern Ireland) and preserved by dry freezing at –80 °C. The initial identification was verified by an additional DNA barcoding process according to the framework developed by Twyford et al. (2024). A small sample was dissected from the specimens and stored in ethanol, while the remaining parts were shipped on dry ice to the Wellcome Sanger Institute (WSI). The tissue was lysed, the COI marker region was amplified by PCR, and amplicons were sequenced and compared to the BOLD database, confirming the species identification ( Crowley et al., 2023). Following whole genome sequence generation, the relevant DNA barcode region was also used alongside the initial barcoding data for sample tracking at the WSI ( Twyford et al., 2024). The standard operating procedures for Darwin Tree of Life barcoding have been deposited on protocols.io ( Beasley et al., 2023). Nucleic acid extraction The workflow for high molecular weight (HMW) DNA extraction at the Wellcome Sanger Institute (WSI) Tree of Life Core Laboratory includes a sequence of core procedures: sample preparation and homogenisation, DNA extraction, fragmentation and purification. Detailed protocols are available on protocols.io ( Denton et al., 2023b). The idLinVulp1 sample was prepared for DNA extraction by weighing and dissecting it on dry ice ( Jay et al., 2023), and tissue from the whole organism was homogenised using a PowerMasher II tissue disruptor ( Denton et al., 2023a). HMW DNA was extracted in the WSI Scientific Operations core using the Automated MagAttract v2 protocol ( Oatley et al., 2023). The DNA was sheared into an average fragment size of 12–20 kb in a Megaruptor 3 system ( Bates et al., 2023). Sheared DNA was purified by solid-phase reversible immobilisation, using AMPure PB beads to eliminate shorter fragments and concentrate the DNA ( Strickland et al., 2023). The concentration of the sheared and purified DNA was assessed using a Nanodrop spectrophotometer and Qubit Fluorometer using the Qubit dsDNA High Sensitivity Assay kit. Fragment size distribution was evaluated by running the sample on the FemtoPulse system. Hi-C preparation Tissue of the idLinVulp1 sample was processed at the WSI Scientific Operations core, using the Arima-HiC v2 kit. In brief, frozen tissue (stored at –80 °C) was fixed, and the DNA crosslinked using a TC buffer with 22% formaldehyde. After crosslinking, the tissue was homogenised using the Diagnocine Power Masher-II and BioMasher-II tubes and pestles. Following the kit manufacturer's instructions, crosslinked DNA was digested using a restriction enzyme master mix. The 5’-overhangs were then filled in and labelled with biotinylated nucleotides and proximally ligated. An overnight incubation was carried out for enzymes to digest remaining proteins and for crosslinks to reverse. A clean up was performed with SPRIselect beads prior to library preparation. Library preparation and sequencing Pacific Biosciences SMRTbell libraries were constructed using the Revio HiFi prep kit, according to the manufacturers’ instructions. DNA sequencing was performed by the Scientific Operations core at the WSI on a Pacific Biosciences Revio instrument. For Hi-C library preparation, DNA was fragmented to a size of 400 to 600 bp using a Covaris E220 sonicator. The DNA was then enriched, barcoded, and amplified using the NEBNext Ultra II DNA Library Prep Kit following manufacturers’ instructions. The Hi-C sequencing was performed using paired-end sequencing with a read length of 150 bp on an Illumina NovaSeq 6000 instrument. Genome assembly, curation and evaluation Assembly The HiFi reads were first assembled using Hifiasm ( Cheng et al., 2021) with the --primary option. Haplotypic duplications were identified and removed using purge_dups ( Guan et al., 2020). The Hi-C reads were mapped to the primary contigs using bwa-mem2 ( Vasimuddin et al., 2019). The contigs were further scaffolded using the provided Hi-C data ( Rao et al., 2014) in YaHS ( Zhou et al., 2023) using the --break option. The scaffolded assemblies were evaluated using Gfastats ( Formenti et al., 2022), BUSCO ( Manni et al., 2021) and MERQURY.FK ( Rhie et al., 2020). The mitochondrial genome was assembled using MitoHiFi ( Uliano-Silva et al., 2023), which runs MitoFinder ( Allio et al., 2020) and uses these annotations to select the final mitochondrial contig and to ensure the general quality of the sequence. Assembly curation The assembly was decontaminated using the Assembly Screen for Cobionts and Contaminants (ASCC) pipeline (article in preparation). Flat files and maps used in curation were generated in TreeVal ( Pointon et al., 2023). Manual curation was primarily conducted using PretextView ( Harry, 2022), with additional insights provided by JBrowse2 ( Diesh et al., 2023) and HiGlass ( Kerpedjiev et al., 2018). Scaffolds were visually inspected and corrected as described by Howe et al. (2021). Any identified contamination, missed joins, and mis-joins were corrected, and duplicate sequences were tagged and removed. The sex chromosomes were identified by read coverage analysis. The curation process is documented at https://gitlab.com/wtsi-grit/rapid-curation (article in preparation). Evaluation of the final assembly The final assembly was post-processed and evaluated using the three Nextflow ( Di Tommaso et al., 2017) DSL2 pipelines: sanger-tol/readmapping ( Surana et al., 2023a), sanger-tol/genomenote ( Surana et al., 2023b), and sanger-tol/blobtoolkit ( Muffato et al., 2024). The readmapping pipeline aligns the Hi-C reads using bwa-mem2 ( Vasimuddin et al., 2019) and combines the alignment files with SAMtools ( Danecek et al., 2021). The genomenote pipeline converts the Hi-C alignments into a contact map using BEDTools ( Quinlan & Hall, 2010) and the Cooler tool suite ( Abdennur & Mirny, 2020). The contact map is visualised in HiGlass ( Kerpedjiev et al., 2018). This pipeline also generates assembly statistics using the NCBI datasets report ( Sayers et al., 2024), computes k-mer completeness and QV consensus quality values with FastK and MERQURY.FK, and runs BUSCO ( Manni et al., 2021) to assess completeness. The blobtoolkit pipeline is a Nextflow port of the previous Snakemake Blobtoolkit pipeline ( Challis et al., 2020). It aligns the PacBio reads in SAMtools and minimap2 ( Li, 2018) and generates coverage tracks for regions of fixed size. In parallel, it queries the GoaT database ( Challis et al., 2023) to identify all matching BUSCO lineages to run BUSCO ( Manni et al., 2021). For the three domain-level BUSCO lineages, the pipeline aligns the BUSCO genes to the UniProt Reference Proteomes database ( Bateman et al., 2023) with DIAMOND ( Buchfink et al., 2021) blastp. The genome is also split into chunks according to the density of the BUSCO genes from the closest taxonomic lineage, and each chunk is aligned to the UniProt Reference Proteomes database with DIAMOND blastx. Genome sequences without a hit are chunked with seqtk and aligned to the NT database with blastn ( Altschul et al., 1990). The blobtools suite combines all these outputs into a blobdir for visualisation. The genome assembly and evaluation pipelines were developed using nf-core tooling ( Ewels et al., 2020) and MultiQC ( Ewels et al., 2016), relying on the Conda package manager, the Bioconda initiative ( Grüning et al., 2018), the Biocontainers infrastructure ( da Veiga Leprevost et al., 2017), as well as the Docker ( Merkel, 2014) and Singularity ( Kurtzer et al., 2017) containerisation solutions. Table 4 contains a list of relevant software tool versions and sources. Table 4. Software tools: versions and sources.Software toolVersionSourceBEDTools2.30.0 https://github.com/arq5x/bedtools2 BLAST2.14.0 ftp://ftp.ncbi.nlm.nih.gov/blast/executables/blast+/ BlobToolKit4.3.7 https://github.com/blobtoolkit/blobtoolkit BUSCO5.4.3 and 5.5.0 https://gitlab.com/ezlab/busco bwa-mem22.2.1 https://github.com/bwa-mem2/bwa-mem2 Cooler0.8.11 https://github.com/open2c/cooler DIAMOND2.1.8 https://github.com/bbuchfink/diamond fasta_windows0.2.4 https://github.com/tolkit/fasta_windows FastK427104ea91c78c3b8b8b49f1a7d6bbeaa869ba1c https://github.com/thegenemyers/FASTK Gfastats1.3.6 https://github.com/vgl-hub/gfastats GoaT CLI0.2.5 https://github.com/genomehubs/goat-cli Hifiasm0.19.8-r587 https://github.com/chhylp123/hifiasm HiGlass44086069ee7d4d3f6f3f0012569789ec138f42b84 aa44357826c0b6753eb28de https://github.com/higlass/higlass Merqury.FKd00d98157618f4e8d1a9190026b19b471055b22e https://github.com/thegenemyers/MERQURY.FK MitoHiFi3 https://github.com/marcelauliano/MitoHiFi MultiQC1.14, 1.17, and 1.18 https://github.com/MultiQC/MultiQC NCBI Datasets15.12.0 https://github.com/ncbi/datasets Nextflow23.04.0-5857 https://github.com/nextflow-io/nextflow PretextView0.2 https://github.com/sanger-tol/PretextView purge_dups1.2.5 https://github.com/dfguan/purge_dups samtools1.16.1, 1.17, and 1.18 https://github.com/samtools/samtools sanger-tol/ascc- https://github.com/sanger-tol/ascc sanger-tol/genomenote1.1.1 https://github.com/sanger-tol/genomenote sanger-tol/readmapping1.2.1 https://github.com/sanger-tol/readmapping Seqtk1.3 https://github.com/lh3/seqtk Singularity3.9.0 https://github.com/sylabs/singularity TreeVal1.0.0 https://github.com/sanger-tol/treeval YaHS1.2a.2 https://github.com/c-zhou/yahs Software tools: versions and sources. Genome annotation The Ensembl Genebuild annotation system ( Aken et al., 2016) was used to generate annotation for the Linnaemya vulpina assembly (GCA_963675445.1) in Ensembl Rapid Release at the EBI. Annotation was created primarily through alignment of transcriptomic data to the genome, with gap filling via protein-to-genome alignments of a select set of proteins from UniProt ( UniProt Consortium, 2019). Wellcome Sanger Institute – Legal and Governance The materials that have contributed to this genome note have been supplied by a Darwin Tree of Life Partner. The submission of materials by a Darwin Tree of Life Partner is subject to the ‘Darwin Tree of Life Project Sampling Code of Practice’, which can be found in full on the Darwin Tree of Life website here. By agreeing with and signing up to the Sampling Code of Practice, the Darwin Tree of Life Partner agrees they will meet the legal and ethical requirements and standards set out within this document in respect of all samples acquired for, and supplied to, the Darwin Tree of Life Project. Further, the Wellcome Sanger Institute employs a process whereby due diligence is carried out proportionate to the nature of the materials themselves, and the circumstances under which they have been/are to be collected and provided for use. The purpose of this is to address and mitigate any potential legal and/or ethical implications of receipt and use of the materials as part of the research project, and to ensure that in doing so we align with best practice wherever possible. The overarching areas of consideration are: • Ethical review of provenance and sourcing of the material • Legality of collection, transfer and use (national and international) Each transfer of samples is further undertaken according to a Research Collaboration Agreement or Material Transfer Agreement entered into by the Darwin Tree of Life Partner, Genome Research Limited (operating as the Wellcome Sanger Institute), and in some circumstances other Darwin Tree of Life collaborators. The present study provides a highly contiguous and annotated genome assembly for a tachinid fly. Introduction is clear and concise; methods and bioinformatic tools are well described; and results are thoroughly described. I recommend indexing the paper. Minor comment: The mitochondrial genome should also be annotated and deposited in public repositories. Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Yes Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Genomics, evolution I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard. This manuscript presents a high-quality genome of a fly species using a reliable assembly and annotation pipeline. The methods and results are standard and easy to follow, and I have no significant concerns. I'm happy to see this excellent resources added to the Tree of Life project. While I think ToL is a worthy goal in itself, I'd prefer to have seen a more direct statement about the kinds of questions that could be addressed with this genome. The authors state "This will aid research on taxonomy and biology of the species and the phylogeny of the family Tachinidae." This is of course true, but vague - what are the interesting biological questions that this species in particular can be studied for? I always think these genome reports gain value if authors can clearly state those questions. Minor comments: 1. Is there a reason why the BUSCO scores in Figure 2 differ from those in Table 2 and in the text? 2. Also, why wasn't BUSCO performed on the proteome to assess the completeness of the annotation? Are sufficient details of methods and materials provided to allow replication by others? Yes Is the rationale for creating the dataset(s) clearly described? Partly Are the datasets clearly presented in a useable and accessible format? Yes Are the protocols appropriate and is the work technically sound? Yes Reviewer Expertise: Evolutionary genomics, insects I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard.