Metagenomic Analysis Revealing the Impact of Water Contents on the Composition of Soil Microbial Communities and the Distribution of Major Ecological Functional Genes in Poyang Lake Wetland Soil Authors: Yuxin Long, Xiaomei Zhang, Xuan Peng, Huilin Yang, Haiyan Ni, Long Zou, Zhong’er Long Published: 2024 ABSTRACT Poyang Lake is the largest freshwater lake in China, which boasts unique hydrological conditions and rich biodiversity. In this study, metagenomics technology was used to sequence the microbial genome of soil samples S1 (sedimentary), S2 (semi-submerged), and S3 (arid) with different water content from the Poyang Lake wetland; the results indicate that the three samples have different physicochemical characteristics and their microbial community structure and functional gene distribution are also different, resulting in separate ecological functions. The abundance of typical ANME archaea Candidatus Menthanoperedens and the high abundance of mcrA in S1 mutually demonstrate prominent roles in the methane anaerobic oxidation pathway during the methane cycle. In S2, the advantageous bacterial genus Nitrospira with ammonia oxidation function is validated by a large number of nitrification functional genes (amoA, hao, nxrA), manifesting in that it plays a monumental role in nitrification in the nitrogen cycle. In S3, the dominant bacterial genus Nocardioides confirms a multitude of antibiotic resistance genes, indicating their crucial role in resistance and their emphatic research value for microbial resistance issues. The results above have preliminarily proved the role of soil microbial communities as indicators predicting wetland ecological functions, which will help to better develop plans for restoring ecological balance and addressing climate change. 1. Introduction Soil microorganisms are momentous components of both natural and managed ecosystems [1]. Each gram of soil may contain thousands of microorganisms, including bacteria and some small prokaryotes, fungi, and viruses. Soil microbes, especially those found in wetlands, drive the cycling and transformation of soil organic carbon (SOC) and other nutrients, promote the flow of chemical energy and information [2], and also participate in processes such as pollutant degradation and environmental remediation [3], playing a significant role in maintaining the balance and stability of wetland ecosystems [4]. Changes in wetland environmental conditions, such as nutrient content, water content, pH, vegetation, etc., can affect the structure and function of wetland microorganisms [5,6]. Metagenomic next-generation sequencing (mNGS) refers to a metagenomic research method that uses next-generation sequencing technology to directly study the composition of microorganisms in samples through high-throughput sequencing and data analysis techniques [7]. mNGS breaks through the limitations of traditional microbiology based on culture and identification and can obtain almost all DNA or RNA sequences in the sample. Based on conventional research methods such as specific target molecule amplification, restriction enzyme digestion, and electrophoresis, researchers have expanded the Sanger sequencing method and established a metagenomic research method for 16S rRNA clone library sequencing [8]. The emergence of mNGS has made metagenomic methods a popular tool in microbial research. Its advantages include independent cultivation, relatively simple operation, and theoretically unbiased detection of all microorganisms in the sample. Although there are problems such as the large amount of data obtained, complex analysis methods and processes, and difficulty in unifying and standardizing experimental and data analysis processes [9,10], the genetic material of microbial communities can be identified through subsequent optimization analysis methods, which can fully explore their genetic diversity and biochemical reactions, and even further combine with environmental variables to explore the response mechanism between microorganisms and the environment. Wetlands are one of the most productive and valuable ecosystems in the world, providing 40% of the global ecosystem service value [11,12,13,14]. Poyang Lake is located in the middle and lower reaches of the Yangtze River and is the most typical large-scale shallow-water lake in China [15]. The habitat types and structures of the intertidal wetlands are diverse, providing a vast and diverse habitat for organisms. Poyang Lake has also become an important biological resource reservoir in China’s subtropical regions [16,17]. The unique hydrological rhythm of alternating flood and dry seasons causes periodic inundation and exposure of intertidal habitats, which is an important driving force affecting the species composition and microbial diversity of plant communities in floodplain lakes and intertidal wetlands [18]. In recent years, against the backdrop of increased human activity and interference, the water level of Poyang Lake has become low and withered [19,20,21,22], the duration of flooding has become shorter, and the beaches have been exposed earlier, leading to changes in the microbial community in the soil [23]. Exploring the changes in biodiversity and functional gene abundance of communities can effectively evaluate the ecological effects caused by changes in hydrological conditions, which is of great significance for maintaining and protecting biodiversity in Poyang Lake and predicting the distribution pattern evolution of microbial communities under future water level fluctuations. As of now, it is unclear how changes in soil moisture content in Poyang Lake wetland affect the functionality of microbial communities. Therefore, it is necessary to conduct in-depth analysis of the main functions driven by microorganisms in different soil moisture contents. It is generally reasonable to believe that (1) there are significant differences in microbial community structure and physicochemical factors among soil samples with different moisture contents; (2) there are differences in the distribution characteristics of carbon, nitrogen, and antibiotic resistance genes in soil samples with different moisture contents; (3) there is a profound relationship between microbial communities and the driving processes of underground ecological functions. However, the impact of soil moisture on soil microbial community structure and the distribution of important ecological genes varies in different wetland ecosystems. Therefore, the microbial composition and abundance of three soil samples with different water contents from Poyang Lake wetland were analyzed using metagenomic technology, and their effects on the distribution of important ecological functional genes were investigated to reveal the interrelationships between soil water content, soil microbial community structure, and important ecological functional genes. 2. Materials and Methods 2.1. Soil Sampling In October 2022, soil samples were collected from the Poyang Lake region in the range of E 116°25′ and N 28°58′. Three different sampling points (S1 of E 116°25′20.45″ and N 28°58′32.91″, S2 of E 116°25′21.72″ and N 28°58′35.49″, S3 of E 116°23′43.94″ and N 28°58′15.74″) of the Poyang Lake wetland were selected for soil sampling, S1 was submerged by lake water (sedimentary state) and had the highest water content, S2 had a high water content (semi-submerged state), S3 had the lowest water content and was covered with plants (drought), and the sample soil reality is shown in Figure 1. Soil samples were taken at a depth of 10 cm from the surface with an aseptic spatula, plant material and detritus were removed during sampling, and three biological replicates were performed for each sampling point. The sample is named according to its source, for example, the sample from the S1 sampling point is named the S1, and 3 samples taken from sampling point S1 were denoted as S1-1, S1-2, and S1-3, respectively, and so on. A total of 9 samples were collected. Each sample was separated into two groups: one was dried at room temperature for soil physicochemical property measurement and the other was stored at −20 °C for DNA extraction. 2.2. Measurement of Soil Physicochemical Properties The water content (WC) of the soil samples was identified by dividing the mass difference between fresh and dry soil of each sample by the mass of the dry soil, which was obtained by heating the soil sample at 105 °C for 24 h. Soil pH was measured using a pH meter (Leici PHSJ-4F, Shanghai, China) in a 1:5 soil/water suspension after shaking at 25 °C for 1 h in an incubator shaker at 5000 r/min. Soil total carbon (TC) was determined using an element analyzer (Sercon Integra 2, Crewe, UK), and organic carbon (SOC) was determined by the potassium dichromate volume-external heating method. Total nitrogen (TN) was determined by an automatic nitrogen analyzer (SKD-1100, Shanghai, China). Ammonium nitrogen and nitrate nitrogen were extracted by potassium chloride solution-spectrophotometry. Nitrate nitrogen was calculated by ultraviolet spectrophotometry. Three soil replicates from each sampling site were used for physicochemical analysis, and the average and standard deviation of three replicate determinations were calculated. 2.3. DNA Extraction, Sequencing, and Data Processing The macrogenomic DNA was extracted from 9 soil samples, respectively, using the DNeasy powersoil kit (QIAGEN, Hilden, Germany) following the manufacturer’s protocol, and the quality and concentration of DNA were monitored by Nanodrop spectrophotometer, Qbuit fluorometer, and agarose gel electrophoresis. Prepared DNA samples were sent to BENAGEN (Wuhan, China) for shotgun metagenomics sequencing. A total of 9 samples were sequenced, respectively, by second-generation Illumina to obtain raw reads. Fastp software (https://github.com/OpenGene/fastp, accessed on 10 May 2023, Version 0.23.2) was employed to remove low-quality tags and to obtain high-quality sequencing data (Clean Tags). MEGAHIT software (https://github.com/voutcn/megahit, accessed on 14 May 2023, Version 1.2.9) was used for metagenomic assembly, and contig sequences shorter than 300 bp were filtered. We used MetaGeneMark (http://exon.gatech.edu/meta_gmhmmp.cgi, accessed on 27 May 2023, Version 3.26) software’s default parameters to identify the coding regions of the genome, acquired with the results of single sample assembly gene prediction, and obtain the translated protein sequence. We used MMseqs2 (https://github.com/soedinglab/mmseqs2, accessed on 10 June 2023, Version 12-113 e3) software to remove redundancy, with a similarity threshold set to 95% and a coverage threshold set to 90%, to build the redundant data sets. 2.4. Bioinformatics Analysis Non-redundant gene sets analysis was performed on the BMKCloud (http://www.biocloud.net/, accessed on 4 April 2024), which is a biological information cloud platform. The abundance of biotaxa and species in each sample was obtained by comparing the protein sequences of non-redundant genes with the Nr database using BLAST (Version 2.14.0). The functional annotation information was obtained by comparing the protein sequences of non-redundant genes with KEGG, eggNOG, GO, and CAZy carb enzyme databases using BLAST. 2.5. Statistical Analysis The above results revealed the different samples’ overall functional profiles. Using functional gene information from the relevant literature, we extracted all annotated genes and drew a histogram of gene abundance for the carbon and nitrogen cycling processes in different pathways using ORIGIN mapping software (Version Origin 2021). Analysis of significant differences between and inter-groups was performed with SPSS software (Version IBM SPSS Statistics 27), tested by one-way analysis of variance (ANOVA). p < 0.05 was considered to indicate a statistically significant difference. The language R (Version 4.3.0) was used to create a heatmap showing the correlation between microbial functional genes involved in carbon and nitrogen cycling and soil physicochemical factors. 3. Results 3.1. Physicochemical Properties of Soil Samples The soil metagenomic sequencing in the Poyang Lake wetland exhibited good quality, and its basic information is displayed in (Supporting Information Table S1). The physicochemical properties measured in the study showed that the three samples reflected significantly different soil structures (Table 1). The water content is the major factor studied in this article, and it gradually decreases from sample S1 to sample S3. Among the various chemical indicators measured, the contents of NH4+-N represented the highest abundance in S1, and then, in order, S3 and S2, but there is no significant difference between them. All other indicators, such as NO3-N, TC, TN, and SOC, exhibited significant differences between different samples and displayed similar trends of change, including that, as the moisture content decreases, each indicator first increases and then decreases, all showing the highest abundance in S2, and there are significant differences among the three samples. However, the soil C/N of S1 is similar to that of S3 and there is no difference between them, with S2 being the highest sample. The correlation heat map between physical and chemical properties (Supporting Information Figure S1) indicates that the soil moisture content is negatively correlated with ammonium nitrogen, nitrite, and pH, and positively correlated with other physicochemical factors. 3.2. Taxonomic Composition of Microbial Communities The analysis results of the soil microbial diversity index at each sampling point in the Poyang Lake wetland are shown in Table 2. The Observed Species, ACE, and Chao1 indices, which represent the species richness in soil, revealed that the microbial diversity in the three samples showed the same trend, with S2 having the highest species richness and S1 having the lowest. The Pielou index was used in the Alpha index to measure the evenness of species diversity distribution, with species distribution in S1 being the most uniform. Shannon and Simpson reflect the diversity of a community, which is influenced by the richness and evenness of species in the sample community. The larger the Shannon index, the higher the diversity of the sample community, with S1 having the highest value. The composition and abundance of soil microorganisms in different samples are shown in Supporting Information Figure S2, which indicates that a total of 4 domains, 7 kingdoms, 199 phyla, 832 families, 3470 genera, and 23813 species were identified by annotating the total microbial species of three collected soil samples. The prokaryotic microbial communities are mainly composed of bacteria (76.05–89.88%), with a relatively small proportion of archaea (1.32–9.60%). The eukaryotic microbial community is mainly composed of fungi (0.01–0.14%). In addition, the annotation results of the metagenome contain a large number of high-quality sequences (7.23–20.00%) that have not been classified, indicating that there is still a large amount of unknown biological information for exploration. Microbial communities vary significantly among soil samples with different water contents, displaying similar classifications but varying abundances among species. At the phylum level (Figure 2A), bacteria are divided into 199 phyla, mainly including Proteobacteria, Actinobacteria, Chloroflexi, Acidobacteria, Nitrospirae, Verrucomicrobia, Gemmatimonadetes, Candidatus Rokubacteria, Cyanobacteria, etc. Among them, Proteobacteria is the dominant phylum in the S1 and S2 samples, accounting for 43.49% and 41.65%, respectively. Actinobacteria is the dominant phylum in S3, accounting for 33.24%, which is 12.8 and 10.4 times higher than its abundance in S1 and S2, respectively. At the genus level (Figure 2B), there are a total of 3470 genera in the annotated classification of bacteria, mainly including Nocardioides, Anaeromyxobacter, Nitrospira, Candidatus Methanoperedens, Marmoricola, Bradyrhizobium, etc. The dominant genus in S1 is Anaeromyxobacter (3.46%), while it is Nitrospira in S2 (1.85%) and Nocardia-like (8.25%) in S3. The relative abundance of Candidatus Methanoperedens with the second abundance of S1 is 1.77%, which is 7.1 and 8.4 times higher than that of S2 and S3, respectively. The microbial diversity of archaea communities is significantly lower than that of bacterial communities. It was found that the most abundant archaea are Euryarchaeota, which account for 2.58% of the total microbial taxonomic level, and Bathyrachaeota account for 1.26% of the total microbial taxonomic level. In the correlation analysis between microbial phylum level and physicochemical factors, the cumulative interpretation rates of axis one and axis two in the RDA graph are 66% (Figure 3). Three samples are clustered separately and there are significant differences among them. The soil moisture content (WC) is positively correlated with Verrucomicrobia, Proteobacteria, and Euryarchaeota, and negatively correlated with Actinobacteria, Gemmatimonadetes, Chloroflexi, and Candidatus Rokubacteria. Nitrospirae is positively correlated with nitrite in soil. The content of soil C/N, organic carbon, total carbon, and total nitrogen is positively correlated with Candidatus Bathyachiaeota and Acidobacteria. 3.3. Microbial Carbon Fixation Genes The assimilation of CO2 into organic material is quantitatively the most important biosynthetic process on Earth [24,25,26]. Six autotrophic CO2 fixation pathways have been found in various environments to date: including aerobic pathways, such as the Calvin cycle (CBB), 3-hydroxy propionic acid dual cycle (3-HP), and 3-hydroxy propionic acid cycle/4-hydroxybutyric acid cycle (3HP/4HB), and anaerobic pathways, such as the reducing tricarboxylic acid cycle (rTCA), reducing acetyl CoA pathway (WL), and dicarboxylic acid/4-hydroxybutyric acid cycle (DC/HB). The enzymes catalyzing limiting steps in a given pathway are usually conserved and act as key enzymes, and the corresponding coding genes, often named marker genes [27], are commonly used in microbial ecological studies. In this study, cbbL was used for ribulose 1,5-bisphosphate carboxylase/oxygenase (RubisCO) of the CBB pathway, aclA for the ATP citrate lyase in the rTCA pathway, acsA for the carbon-monoxide dehydrogenase catalytic subunit in the WL pathway, accA for the acetyl-CoA carboxylase carboxyl transferase subunit alpha in the 3HP/4HB pathway, pcc for the Malonyl-CoA Reductase in the 3-HP pathway, and hcd for the 4-hydroxybutyryl-CoA dehydratase in the DC/HB pathway. Six marker genes for carbon fixation pathways were detected in three samples with different soil moisture contents (Figure 4). Among them, the abundance of the marker gene aclA in the rTCA pathway was the lowest in all three samples. The acsA in the WL pathway had the highest abundance in samples S1 and S2, while the accA gene in the 3HP/4HB pathway had the highest abundance in sample S3. 3.4. Microbial Methane Cycling Genes Methane metabolism, driven by methanogenic and methanotrophic microorganisms, plays a pivotal role in the carbon cycle [14,28,29]. The key enzyme-corresponding coding genes in the natural methane cycle pathway driven by microorganisms are as follows [30,31]: mcr, methyl coenzyme-M reductase gene; mtr, tetrahydromethanopterin S-methyltransferase gene; mer, F420-dependent methylenetetrahydromethanopterin dehydrogenase gene; mtd, methylenetetrahydromethanopterin reductase gene; mch, methenyltetrahydromethanopterin cyclohydrolase gene; ftr, formylmethanofuran-tetrahydromethanopterin N-formyltransferase gene; fwd, formylmethanofuran dehydrogenase gene; fdo, formate dehydrogenase iron-sulfur subunit gene; fdh, formate dehydrogenase gene; mdh, malate dehydrogenase gene; pmo, methane/ammonia monooxygenase. The distribution of methane metabolism functional genes in soils with different water contents is shown in Figure 5. The KEGG gene functional annotation indicates that the functional genes of each step in the methane cycle are distributed in all three samples, forming a complete cycle. The genes related to methane metabolism in S1 are concentrated in the anaerobic process, and their abundance is higher than that in S3, except for the mer gene. The genes related to methane metabolism in S3 are concentrated in the aerobic pathway, and their abundance is higher than that in S1, (except for the pmo gene). S2, whether in aerobic or anaerobic conditions, has a relatively average distribution of functional genes. 3.5. Microbial N Cycling Genes Microbial nitrogen cycling mainly involves six pathways [32,33,34], each of which has corresponding key enzymes; the marker genes coding by microorganisms for each key enzyme are as follows [35,36]: nitrogenase gene nifH in nitrogen fixation; ammonia monooxygenase gene amoA/amoB, hydroxylamine oxidoreductase gene hao, and nitrite oxidoreductase gene nxrA/nor in nitrification; nitrate reductase gene narG, nitrite reductase gene nirK/nirS, nitric oxide reductase gene norB, and nitrous oxide reductase gene nosZ in denitrification; N2H4 synthase gene hzsA and N2H4 oxidoreductase hzo in anaerobic ammonia oxidation; nitrate assimilation reductase gene nasA/narB and nitrite assimilation reductase gene nirA/nirB in assimilation nitrogen reduction; nitrate dissimilatory reductase gene napA, and nitrite dissimilatory reductase gene nrfa in dissimilar nitrogen reduction. The presence of key enzyme genes related to the nitrogen cycling pathway in three soil samples is shown in Figure 6. Except for the key enzyme genes in anaerobic ammonia oxidation that have not been discovered yet, other pathways exist in all three samples. It can be seen that the nitrogen cycling profiles of three different soil states varied with changes in soil moisture content, the abundance of key enzyme genes related to anaerobic ammonia oxidation in S3 is extremely low and can be ignored. The functional genes driving nitrogen cycling by microorganisms in S1 and S2 are significantly enriched in the Denitrification and Dissimilatory N reduction processes, while S3 is enriched in the Nitrification and Assimilatory N reduction processes. 3.6. Microbial Antibiotic Resistance Genes Antibiotic resistance genes are a new type of environmental pollutant widely present in environmental microorganisms and media [37]. Antibiotic resistance genes in the environment can not only replicate and increase with the proliferation of microorganisms but also migrate and spread between different microorganisms, directly or indirectly affecting ecological security and human health [38,39]. We analyzed the top eight antibiotic-resistance genes in the abundance of soil microorganisms in Poyang Lake wetland (Figure 7). The most abundant resistance gene type among the three samples is multidrug. Except for tetracycline-resistance genes, which have the highest abundance in S2, the abundance of other antibiotic-resistance genes is highest in S3. 3.7. The Correlation Between C/N-Cycle Functional Genes and Physicochemical Factors Correlation analysis was conducted between carbon, nitrogen, and methane cycling, relating functional genes driven by microorganisms in three samples with different moisture contents of the soil and soil physicochemical properties (Figure 8). The abundance of soil functional genes in different states was significantly or extremely significantly correlated with environmental factors. Among them, water content is a key factor affecting soil carbon and nitrogen ecological functions driven by microorganisms. In the carbon fixation pathway, the abundance of cbbl is significantly positively correlated with water content, while the abundance of aclA, acsA, and hcd is highly significantly positively correlated with C/N, total carbon, total nitrogen, and organic carbon content, and negatively correlated with ammonia nitrogen content. The abundance of accA and pcc is significantly negatively correlated with water content and nitrite nitrogen content, and accA is also significantly negatively correlated with ammonium nitrogen content. During the methane cycle, there is a highly significant positive correlation between pmo abundance and water content. In anaerobic processes, the mdh, fdh, and fdo are significantly negatively correlated with water content, negatively correlated with nitrite and ammonium nitrogen, and positively correlated with nitrate. During aerobic processes, mcr and mtd are positively correlated with water content. mtr, mch, ftr, and fwd are significantly positively correlated with C/N, total carbon, total nitrogen, and organic carbon content, positively correlated with nitrite and nitrate content, and negatively correlated with ammonium nitrogen content. During the nitrogen cycling, there are a significant positive correlation between amoA during ammonia oxidation and water content and nitrite, while hao is significantly positively correlated with C/N, total carbon, total nitrogen, organic carbon, and nitrite content; During denitrification, norB and nasZ are significantly positively correlated with C/N, total carbon, total nitrogen, organic carbon, and nitrate content, and significantly negatively correlated with ammonium nitrogen; The assimilation and nitrogen reduction processes of nasA, narB, nirA, and nirB are significantly negatively correlated with water content and nitrite. 4. Discussion Wetlands, as an important factor in ecosystems, play a critical role in regulating climate change as a carbon sink and a carbon source, provide a unique habitat, and support biodiversity [40]. The Poyang Lake is the largest freshwater lake in China, and one of the largest freshwater lake/wetland complexes in Asia, which plays a momentous role in regional and global biodiversity conservation [41,42]. In this study, high-throughput sequencing was performed to analyze the microbial characteristics in 3 soil samples with different water content and to dissect the interactions between the microbial community’s functional structure, ecological responses, and biogeochemical processes. 4.1. The Difference in Moisture Content Results in Differences in the Physicochemical Properties of Wetland Soil Wetlands serve as a medium for receiving water and drainage, and hydrological conditions are the fundamental attributes of wetland ecosystems [43]. Water conditions determine the physical properties of wetland soil, including the type and the structure of surface plant communities and the soil microbial community, affecting ecosystem productivity [44]. The physicochemical properties of 3 soil samples with different moisture from the Poyang Lake wetland were determined in this study (Table 1). It was found that the soil from all three sampling points was weakly acidic; therefore, pH value is not a key influencing factor on the physicochemical properties of the Poyang Lake wetland. Among, except for ammonium nitrogen, all other forms of carbon and nitrogen content, soil C/N ratio are highest in S2. The higher C/N ratio in S2 means better soil quality under this moisture content condition, indicating that excessive or insufficient soil moisture in wetlands is not conducive to the accumulation of their carbon and nitrogen content. Similarly to our research findings, previous studies have also demonstrated that water conditions are a key factor affecting wetland soil properties. The study on soils from the East Dongting Lake wetland, China showed that the water content can control the structure and function of wetlands, and changes in water content can alter the archaeal distribution patterns [45]; The different water conditions in East Dongting Lake wetlands jointly affect the soil microbial biomass carbon, nitrogen, and enzyme activities [46]. 4.2. The Difference in Soil Physicochemical Properties Results in Differences in Soil Microbial Community Structure Thanks to the diverse environmental conditions, the soil contains the most diverse microbial community on earth [47,48]. The spatiotemporal specificity of soil physicochemical properties could prompt microorganisms to evolve rich strategies to cope with extreme environments. Therefore, even slight differences in soil environment can lead to changes in the composition, quantity, and function of microbial populations [49,50,51]. The β diversity PCA diagram of soil microbial communities with different water contents from the Poyang Lake wetland revealed significant differences among the three samples (Supporting Information Figure S3). From the relative abundance of soil microorganisms in the Poyang Lake wetland (Figure 2), it can be seen that at the phylum level, S1 and S2, which are dominated by Proteobacteria, have similar microbial compositions, but there are significant differences compared to S3, which is dominated by Actinobacteria. At the genus level, all three samples contain a large number of unassigned and unclassified microbial genes, as existing microbial resources and technologies are far from sufficient to support our exploration of all microbial genes in the soil. Meanwhile, there are significant differences among the three samples. S1 forms a specific community of the dominant genus of Anaeromyxobacter under strict anaerobic conditions, and the second most abundant genus is Candidatus Methanoperedens, which can generate methane. S2 forms a specific community dominated by Nitrospira, which has nitrification in the nitrogen cycle, oxidizing nitrite to nitrate to provide proton power. S3 grows a specific community of aerobic actinomycetes with Nocardiodies as the primary bacterial genus, capable of producing multiple antibiotics. The RDA analysis of the correlation between microbial communities and soil physicochemical properties (Figure 3) manifested that among the microbial community composition of the three soils in Poyang Lake, water content, TC, TN, SOC, and soil C/N ratio are the key influencing factors on the microbial community in Poyang Lake wetland. In the early research on the structure and function of the soil microbial community in the Poyang Lake wetland, correlation analysis and RDA analysis showed that the composition of the soil bacterial community in Poyang Lake wetland was mainly influenced by soil organic matter and nutrient elements (TOC, TN), and soil moisture content was also one of the influencing factors [52,53]. This is roughly consistent with our research results. According to Liu et al.’s study, the planktonic bacteria in the Poyang Lake wetland were most abundant in the Bacteroidetes, Actinobacteria, and Proteobacteria, and their diversity was significantly affected by hydrological rhythms [54]. In the context of extreme drought and prolonged dry seasons, the microbial community in the Poyang Lake wetland is significantly influenced by element content and water conditions, gradually forming a relatively stable and specific composition structure. 4.3. The Differences in Soil Microbial Community Structure Result in Differences in Ecological Function Distribution Microorganisms, as an important component of lake wetland ecosystems, drive the cycling of nutrients and the migration and transformation of pollutants such as heavy metals in lake wetlands [55,56,57]. At the same time, the community composition and function of wetland soil microorganisms are also significantly influenced by element content, water conditions, and lake wetland management methods. The main carbon fixation pathways of soil under different flooding conditions are different. According to the results shown in Figure 4, under long-term flooding conditions like S1, the carbon fixation pathways are mainly WL and CBB pathways. Under S2, the pathways include mainly WL and DC/4HB through anaerobic pathways, while under S3 conditions, 3HP/4HB and 3-HP through aerobic pathways are mainly involved. The CBB cycle is the most common CO2 fixation method in organisms [58]. The key enzyme type I rubisco enzyme (CbbL) in the CBB pathway is commonly found in green-like bacterial communities (plants, cyanobacteria, green algae, alpha proteobacteria, beta proteobacteria, and gamma proteobacteria, etc.) and red-like bacterial communities (red algae, brown algae, alpha-proteobacteria, and beta-proteobacteria, etc.) [59]. The S1 and S2 carbon fixed functional genes cbbL have relatively high abundance, which is speculated to be due to their high relative abundance of Proteobacteria (43.49%, 41.65%). According to results shown in Figure 8, water content, TC, TN, SOC, and C/N are key factors affecting the distribution of carbon fixation functional genes. The anaerobic degradation of methane in nature is mainly achieved through the reverse reaction process of the methane production pathway, which is usually mediated by a type of anaerobic methanotrophic (ANME) archaea [60,61]. Previous studies have found that methyl coenzyme M reductase (Mcr) is a key enzyme for methane production and activation of alkane molecules [62]. Among them, mcrA, which is the coding gene for one of the two subunits of Mcr, is often used to detect the abundance and population of methane-metabolizing archaea in the environment. From the methane cycle diagram (Figure 5), it can be seen that the abundance of the mcrA gene varies significantly in soils under different flooding conditions, with S1 having the highest abundance and S3 having the lowest abundance. The ANME group with the highest abundance is found in S1, and Figure 2B shows the typical ANME archaea Candidatus Menthanoperedens with high abundance in S1. In addition, in the heat map of the correlation between methane cycle functional genes and soil physicochemical factors (Figure 8), there is a positive correlation between mcr and water content of nitrite, indicating a certain relationship between the anaerobic methane oxidation process involved in mcr and nitrite content. Therefore, the soil of Poyang Lake wetland under flooded conditions plays a prominent role in the anaerobic methane oxidation process. The nitrification process in the nitrogen cycle is catalyzed by ammonia-oxidizing bacteria and nitrifying bacteria, respectively [63]. In 2015, both ammonia oxidation and nitrite reduction were actualized by some lineages of Nitrospira, known as complete ammonia oxidation (Comammox), have been found [64]. The abundance of Nitrospira, the dominant bacterial genus in S2, is significantly higher than that in other samples. Meanwhile, S2 has a relatively high abundance of functional genes (amoA, hao, nxrA) during the nitrification process. However, the abundance of nxrA in S3 is significantly higher than that in S2, and we speculate that this is due to the high abundance of Chloroflexi in S3, which also has nitrite-reducing ability. In addition, studies have shown a significant negative correlation between the abundance of Nitrospira and the concentration of ammonia nitrogen. In this study, S2, with the lowest ammonia nitrogen concentration (Table 1), contained the highest abundance of Nitrospira, which also confirms this. 4.4. The Differences in Soil Microbial Community Structure Result in Differences in Antibiotic Resistance Distribution Antibiotic resistance is a global health challenge, involving the transfer of bacteria and genes between humans, animals, and the environment [65,66]. On the map of antibiotic resistance gene abundance distribution, S3 has the highest abundance except for the tetracycline-resistance gene, which is reasonable as the wetland soil is closest to human activities. In addition, the most abundant genus of Nocardioides in S3 has strong adaptability to relatively harsh environments and can be widely distributed by regulating intracellular metabolism, synthesizing secondary metabolites, and secreting special enzymes. Linking a high abundance of resistance genes with a high abundance of the Nocardioides genus can confirm the special function of S3 soil microorganisms on resistance genes. The three hypotheses mentioned in the previous introduction have been verified in this study. Through data detection and analysis, it is confirmed that the microbial structure and physicochemical factors of soil samples with different water content in Poyang Lake wetland are different. They also have completely different functional profiles of carbon, nitrogen, and antibiotic resistance genes. Through the correlation analysis of data and literature review, the deep relationship between microorganisms and ecological functions was demonstrated. The analysis of these factors will provide important insights into microbial community structure as a worthwhile indicator of ecological functional changes. 5. Conclusions The microbial community composition and physicochemical properties of the three soil samples with different moisture contents in the Poyang Lake wetland exhibit distinct characteristics, and their mutual influence leads to their different ecological functions. This study analyzed the microbial community composition’s characteristics and functional gene abundance in different soil samples of wetlands, in order to gain a deeper understanding of the relationship between underground microbial communities and field ecological features. The abundance of Candidatus menthanoperedons and the high abundance of mcrA in S1 mutually confirm the prominent role of S1 in the anaerobic oxidation pathway of methane in the methane cycle process. The dominant bacterial genera Nitrospira in S2 is mutually confirmed with a large number of nitrification functional genes (amoA, hao, nxrA), indicating the prominent role of S2 in nitrification during the nitrogen cycle. The dominant bacterial genera Nocardia in S3 is mutually confirmed with a large number of discovered antibiotic resistance genes, indicating the important function of S3 in resistance genes and its outstanding research value for microbial resistance issues. The above study has preliminarily confirmed the indicator role of soil microbial communities in predicting wetland ecological functions, which will help us better formulate plans for restoring ecological balance and regulating climate change. Although it is unclear whether these conclusions can be extended to other wetland ecosystem types due to increased environmental heterogeneity and climate uncertainty, understanding the reactions of soil microorganisms and their potential impacts is crucial for a deeper understanding of the functions of underground wetland ecosystems.