Achieving desired characteristic impedances in customized coplanar waveguide transmission line design Authors: Mohd H. S Alrashdan Published: 2024 ABSTRACT Coplanar waveguide (CPW) transmission lines are valued for their planar design, low radiation, and minimized signal loss, but controlling their characteristic impedance remains a challenge. This study employs the Taguchi method, a statistical approach, to optimize the characteristic impedance by adjusting eight control factors: track width, track thickness, gap width, dielectric height, backplane thickness, conductor material conductivity, dielectric conductivity, and operational frequency. The analysis evaluates these factors across three levels to find optimal conditions, with dielectric height and track width identified as most influential. Additional assessments using main effect screening, Analysis of Variance (ANOVA), and multivariable linear regression validate the Taguchi method's effectiveness. The results of this effort encompass a distributed resistance of 133.69 Ω/m, a distributed inductance of 2.6676E-7H/m, a shunt conductance of 2.8880E-16 S/m, a capacitance of 7.4103E-11 F/m, a propagation constant of (1.1141 + 279.36i) m-1, and a characteristic impedance of (59.999 - 0.23928i) Ω. A CPW transmission line with a characteristic impedance of 60 Ω was successfully designed and simulated using COMSOL Multiphysics, showing promising results for efficient CPW designs tailored to specific applications. The paper describes•Applied the Taguchi method to assess control factors that affect the Characteristic Impedances of the coplanar waveguide Transmission Lines.•Conducted additional validations with ANOVA and regression analysis.•Simulated designs based on optimized parameters using COMSOL Multiphysics. Specifications tableSubject area:EngineeringMore specific subject area:Electrical and Electronic Engineering.Name of your method:Taguchi method to design coplanar waveguide Transmission Lines with Targeted Characteristic ImpedancesName and reference of original method:Alrashdan, M. H., Al-qudah, Z., & Al Bataineh, M. (2024). Microstrip patch antenna directivity optimization via Taguchi method. Ain Shams Engineering Journal, 15(9), 102,923.Resource availability:10.1016/j.asej.2024.102923 Subject area:EngineeringMore specific subject area:Electrical and Electronic Engineering.Name of your method:Taguchi method to design coplanar waveguide Transmission Lines with Targeted Characteristic ImpedancesName and reference of original method:Alrashdan, M. H., Al-qudah, Z., & Al Bataineh, M. (2024). Microstrip patch antenna directivity optimization via Taguchi method. Ain Shams Engineering Journal, 15(9), 102,923.Resource availability:10.1016/j.asej.2024.102923 Background Coplanar Waveguide (CPW) transmission lines offer several advantages over other configurations, such as microstrip and coaxial lines, particularly for high-frequency and high-power applications. CPW has lower radiation loss, better heat dissipation, and reduced crosstalk, enhancing signal integrity. Key parameters affecting CPW performance include characteristic impedance, signal conductor width, spacing between signal and ground planes, substrate height, dielectric constant, signal frequency, and loss tangent. Optimizing these parameters is crucial for aligning impedance with circuit requirements, especially in Radio frequency (RF) or microwave circuits. Researchers have employed a spectrum of methods and design techniques to refine and govern the characteristic impedance of CPW transmission lines. These methods encompass various approaches, such as adjusting conductor width [1], modifying gap width [2], manipulating substrate properties such as the dielectric constant (εᵣ) and loss tangent of the substrate material [3], introducing tapered structures [4], segmenting the CPW into multiple sections with varying dimensions to achieve distinct impedance values along the line's length [5], integrating stubs and slot line structures [6,7], and employing dielectric overlay or underlay. The addition of dielectric layers above or below the CPW structure is a technique often utilized for fine-tuning impedance or achieving specific values [8]. Moreover, researchers have explored the use of multilayer CPW configurations [9] as an additional approach to achieve optimal control over characteristic impedance. Historically, these approaches have predominantly relied on a trial-and-error methodology, which can be time-consuming and inefficient. In contrast, the Taguchi Method, a statistical approach developed by Dr. Genichi Taguchi, offers a structured way to optimize processes and improve reliability [10]. This research, used the Taguchi Method to systematically explore how eight variables influence the characteristic impedance of CPW transmission lines, improving efficiency and performance. This research aims to develop a systematic methodology using the Taguchi method to analyze eight critical factors affecting the characteristic impedance of CPW transmission lines, including track width and thickness, gap width, dielectric height, backplane thickness, conductor material and its conductivity, dielectric conductivity, and frequency for specific target impedances in various applications (Fig. 1).Fig. 1A diagram of achieving desired characteristic impedances in customized coplanar waveguide transmission line design technique procedure.Fig 1 A diagram of achieving desired characteristic impedances in customized coplanar waveguide transmission line design technique procedure. Method details Coplanar waveguide transmission lines theory A Coplanar Waveguide (CPW) is a transmission line used in high-frequency and microwave applications to transport electromagnetic signals. Its wide adoption is attributed to its flexibility and the ease of manufacturing and integration into microwave circuits, primarily due to its flat, planar structure. A CPW comprises three fundamental elements: a central conductor, two adjacent ground planes, and a dielectric material in the middle. This setup, illustrated in Fig. 2 below, enables the transmission of electromagnetic waves. The central conductor, often implemented as a metal trace or strip, is responsible for transmitting the signal and is located on the same plane as the ground plane. These ground planes, situated on both sides of the central conductor, have a dual role – they serve as a path for the electromagnetic fields to return and maintain the coplanar structure. They also play a vital role in containing the electromagnetic waves within the CPW structure. The dielectric material serves as the separator between the centre conductor and the ground planes. It is chosen for its dielectric constant, which affects the characteristic impedance and propagation speed of signals in the CPW (Fig. 3).Fig. 2CPW cross sectional area.Fig 2Fig. 3Equivalent circuit model of a CPW transmission line.Fig 3 CPW cross sectional area. Equivalent circuit model of a CPW transmission line. The operation of CPW is based on the fundamental principles of wave propagation. When an electrical signal is applied to the centre conductor, it generates an electromagnetic field. The signal travels along the centre conductor in the form of electromagnetic waves. Electromagnetic fields propagate along transmission lines, approximately behaving as transverse electromagnetic (TEM) waves. The equation describing the electric potential on a transmission line in the frequency domain, considering one dimension, is expressed as follows:(1)∂∂x(1R+iωL∂v∂x)−(iωC+G)V=0 In this equation, R, L, G, and C represent the distributed values for resistance, inductance, conductance, and capacitance. A comparable wave equation can be derived for the current flowing through the transmission line. The following is a schematic representation of a transmission line terminated by a load impedance. In the absence of any reflected waves, when only a forward-propagating wave is considered within the transmission line, dividing the voltage V by the current I yields the characteristic impedance, denoted as Z0 or the wave impedance, of the transmission line.(2)Z0=VI=R+iωLG+iωC The ground planes flanking the central conductor serve as a boundary that effectively contains the electromagnetic fields within the CPW structure. This confinement is essential for facilitating regulated signal propagation. The characteristic impedance of the CPW depends on variables such as the width and spacing between the central conductor and ground planes, along with the characteristics of the dielectric material. Engineers can manipulate these factors to create CPW setups with exact impedance values. One of the notable characteristics of CPWs is their ability to minimize signal loss, rendering them highly suitable for applications in the high-frequency and microwave domains. This attribute is primarily attributed to the confinement of electromagnetic fields within the dielectric material, which in turn reduces radiation losses. CPWs also demonstrate versatility, as they can be easily integrated with other components within microwave circuits, encompassing elements like filters, resonators, and antennas. They are also suitable for creating balanced transmission lines. CPW transmission lines serve as a fundamental component in the field of high-frequency and microwave engineering. Their distinctive structure and operational principles render them an indispensable choice for diverse applications where the precise regulation of characteristic impedance holds paramount importance. The impedance of CPW transmission lines stands as a fundamental parameter with a profound impact on their utility and efficacy within Radio frequency (RF) and microwave circuits. Exacting control over impedance is imperative to ensure the efficient transmission of signals, minimize signal losses, and uphold the integrity of the transmitted signals. Achieving precise impedance matching is of critical importance across a broad spectrum of applications, spanning from RF components to antennas and sensors. It serves as a pivotal factor in attaining the desired performance levels in these systems. Taguchi method and it's details The characteristic impedance of a Coplanar Waveguide (CPW) transmission line depends on several key factors. In this study, we examine eight specific variables, each analyzed at three different levels, to assess their impact on the characteristic impedance of the CPW. Table 1 presents a detailed overview of the identified factors along with their respective levels. Additionally, Fig. 4 offers a two-dimensional schematic of the CPW transmission line configuration examined in this study. Central to the methodology is the L27 orthogonal array, a key component of the Taguchi method, a powerful optimization technique developed by Genichi Taguchi. This array, comprising 27 unique experimental trials, is specifically designed to assess the effects of multiple factors on a particular system or process [10].Table 1Control factor with their levels.Table 1:Control factorLevelL1L2L3Track width (w)(mm),(P1)0.180.200.22Gap width (wg)(mm),(P2)0.10.120.14Track Thickness (mm),(P3)0.010.020.03Dielectric Height (h) (mm),(P4)0.060.070.08Back Plane Thickness (tbp) (mm),(P5)0.010.020.03Conductor Material and its Conductivity (S/m),(P6)Aluminum ( 3.77E7)Gold (4.10E7)Copper (5.98E7)Dielectric conductivity (S/m),(P7)Hard rubber (10−14)Wood (10−15)Sulfur or air (10−16)Frequency (GHz),(P8)81012Fig. 42 D layout of the CPW transmission line.Fig. 4 Table 1Control factor with their levels.Table 1:Control factorLevelL1L2L3Track width (w)(mm),(P1)0.180.200.22Gap width (wg)(mm),(P2)0.10.120.14Track Thickness (mm),(P3)0.010.020.03Dielectric Height (h) (mm),(P4)0.060.070.08Back Plane Thickness (tbp) (mm),(P5)0.010.020.03Conductor Material and its Conductivity (S/m),(P6)Aluminum ( 3.77E7)Gold (4.10E7)Copper (5.98E7)Dielectric conductivity (S/m),(P7)Hard rubber (10−14)Wood (10−15)Sulfur or air (10−16)Frequency (GHz),(P8)81012 Control factor with their levels. 2 D layout of the CPW transmission line. One of the distinguishing characteristics of orthogonal arrays is their structured approach to controlling variables, enabling researchers to isolate the effects of individual factors and determine the optimal combination for desired outcomes. The L27 array is particularly effective for design with numerous factors, allowing engineers and scientists to find the important factors while reducing the experiments required. This method cut time and resources while improving the accuracy and consistency of results by minimizing random variations. Within the Taguchi method, the L27 orthogonal array continues to be a valuable tool for experimental design, process optimization, and achieving robust results across a wide range of fields and applications [10]. The influence of eight distinct control factors and their various levels on the characteristic impedance of a CPW transmission line is examined using the L27 Taguchi orthogonal array, as shown in Table 2. This method significantly optimizes the process, enabling a comprehensive analysis with just 27 experiments to determine each factor's effect on the characteristic impedance. In comparison, traditional trial-and-error techniques would require conducting numerous, time-intensive experiments.Table 2Experimental design for the Taguchi L27 OA featuring the real control factors.Table 2:Exp #Taguchi L27 (OA) design experimentTaguchi L27 (OA) actual control parameters.P(1)P(2)P(3)P(4)P(5)P(6)P(7)P(8)P(1)P(2)P(3)P(4)P(5)P(6)P(7)P(8)1111111110.180.10.010.060.0137,700,0001E−1482111122220.180.10.010.060.0241,000,0001E−15103111133330.180.10.010.060.0359,800,0001E−16124122211120.180.120.020.070.0137,700,0001E−14105122222230.180.120.020.070.0241,000,0001E−15126122233310.180.120.020.070.0359,800,0001E−1687133311130.180.140.030.080.0137,700,0001E−14128133322210.180.140.030.080.0241,000,0001E−1589133333320.180.140.030.080.0359,800,0001E−161010212312310.20.10.020.080.0141,000,0001E−16811212323120.20.10.020.080.0259,800,0001E−141012212331230.20.10.020.080.0337,700,0001E−151213223112320.20.120.030.060.0141,000,0001E−161014223123130.20.120.030.060.0259,800,0001E−141215223131210.20.120.030.060.0337,700,0001E−15816231212330.20.140.010.070.0141,000,0001E−161217231223110.20.140.010.070.0259,800,0001E−14818231231220.20.140.010.070.0337,700,0001E−151019313213210.220.10.030.070.0159,800,0001E−15820313221320.220.10.030.070.0237,700,0001E−161021313232130.220.10.030.070.0341,000,0001E−141222321313220.220.120.010.080.0159,800,0001E−151023321321330.220.120.010.080.0237,700,0001E−161224321332110.220.120.010.080.0341,000,0001E−14825332113230.220.140.020.060.0159,800,0001E−151226332121310.220.140.020.060.0237,700,0001E−16827332132120.220.140.020.060.0341,000,0001E−1410 Table 2Experimental design for the Taguchi L27 OA featuring the real control factors.Table 2:Exp #Taguchi L27 (OA) design experimentTaguchi L27 (OA) actual control parameters.P(1)P(2)P(3)P(4)P(5)P(6)P(7)P(8)P(1)P(2)P(3)P(4)P(5)P(6)P(7)P(8)1111111110.180.10.010.060.0137,700,0001E−1482111122220.180.10.010.060.0241,000,0001E−15103111133330.180.10.010.060.0359,800,0001E−16124122211120.180.120.020.070.0137,700,0001E−14105122222230.180.120.020.070.0241,000,0001E−15126122233310.180.120.020.070.0359,800,0001E−1687133311130.180.140.030.080.0137,700,0001E−14128133322210.180.140.030.080.0241,000,0001E−1589133333320.180.140.030.080.0359,800,0001E−161010212312310.20.10.020.080.0141,000,0001E−16811212323120.20.10.020.080.0259,800,0001E−141012212331230.20.10.020.080.0337,700,0001E−151213223112320.20.120.030.060.0141,000,0001E−161014223123130.20.120.030.060.0259,800,0001E−141215223131210.20.120.030.060.0337,700,0001E−15816231212330.20.140.010.070.0141,000,0001E−161217231223110.20.140.010.070.0259,800,0001E−14818231231220.20.140.010.070.0337,700,0001E−151019313213210.220.10.030.070.0159,800,0001E−15820313221320.220.10.030.070.0237,700,0001E−161021313232130.220.10.030.070.0341,000,0001E−141222321313220.220.120.010.080.0159,800,0001E−151023321321330.220.120.010.080.0237,700,0001E−161224321332110.220.120.010.080.0341,000,0001E−14825332113230.220.140.020.060.0159,800,0001E−151226332121310.220.140.020.060.0237,700,0001E−16827332132120.220.140.020.060.0341,000,0001E−1410 Experimental design for the Taguchi L27 OA featuring the real control factors. In this research, the analysis of the CPW transmission line is performed using COMSOL Multiphysics software, version 5.4. A total of 27 unique models were created, as outlined in Table 2. Each model was subjected to three separate tests, with each test focused on a different relative dielectric permittivity value, as shown in Table 3. This parameter plays a pivotal role in shaping the characteristic impedance of a CPW. Higher εr values result in a lower characteristic impedance, while lower εr values give rise to a higher characteristic impedance.Table 3The relative dielectric permittivity of the CPW transmission line in the three separate trials.Table 3:Trial 1(T1)Trial 2 (T2)Trial 3 (T3)Relative dielectric permittivity2.252.262.27 Table 3The relative dielectric permittivity of the CPW transmission line in the three separate trials.Table 3:Trial 1(T1)Trial 2 (T2)Trial 3 (T3)Relative dielectric permittivity2.252.262.27 The relative dielectric permittivity of the CPW transmission line in the three separate trials. Designers must exercise due diligence in considering the dielectric constant of the substrate material in order to achieve the desired impedance characteristics for their CPW designs. The inclusion of three replications for every experiment assumes critical importance in obtaining a precise reflection of real-world scenarios or practical assessments. In this study, the process is conducted three times using COMSOL Multiphysics, with each iteration involving a small adjustment to the relative dielectric permittivity. COMSOL Multiphysics is a powerful simulation tool widely used in electromagnetics and transmission line design, particularly for modeling the characteristic impedance in CPW transmission lines. Within the framework of COMSOL, there exists a specialized feature known as Accurate Electromagnetics, meticulously designed to offer a comprehensive platform for the simulation of electromagnetic phenomena. Accurate electromagnetics harnesses finite element analysis (FEA) to solve Maxwell's equations and electromagnetic wave equations, thus enabling a precise representation of the intricate electromagnetic interactions inherent in CPW transmission lines. This high level of precision plays a pivotal role in providing accurate predictions of the characteristic impedance and magnetic flux density attributes of the transmission line. Taguchi analysis, an important technique for enhancing quality, can be efficiently carried out using MINITAB 17 software. The software facilitates the creation of the L27 QA, allowing for the organized adjustment of variables to find the finest parameter settings while minimising the number of experiments required [10]. With its robust suite of statistical tools, MINITAB 17 enables an in-depth examination of how the eight selected factors influence quality attributes, helping to identify those with the most significant impact. Additionally, MINITAB's software make this study easier to visualize main effects and other plots, improving the interpretation of experimental results. By combining Taguchi analysis principles with MINITAB 17′s computational power, this research successfully optimizes processes, enhances product quality, and supports informed decision-making aimed at achieving target performance levels. The data concerning the characteristic impedance of CPW transmission lines, assessed through the Taguchi method, is subjected to analysis using MINITAB 17 statistical software. This analysis encompasses the application of metrics like the signal-to-noise ratio (S/N) and the calculation of the data's mean. When a controlling factor shows a higher S/N or mean value, it indicates a more significant impact on the characteristic impedance of the CPW transmission line. Moreover, MINITAB 17 enables the implementation of mean effect screener analysis, analysis of variance (ANOVA), and multivariable linear regression analysis. These tools help evaluate the importance of factors and their interactions, while also confirming the results from the Taguchi method [10]. Lastly, one of the experiments from Table 2 was revisited to develop a new, tailored CPW transmission line model, designed to achieve a target characteristic impedance of 60 Ω. To accomplish this, the COMSOL Multiphysics 5.4 simulation software was employed once more. It was used to assess the performance of this CPW transmission line, which involved calculating its electrical and magnetic properties and evaluating the distributed values for resistance, inductance, conductance, and capacitance. Method validation Table 4 presents the characteristic impedance values of the Coplanar Waveguide (CPW) obtained from all experiments conducted using COMSOL Multiphysics. An increase in relative dielectric permittivity tends to result in a reduction of the CPW's characteristic impedance. This effect occurs because characteristic impedance is inversely related to the square root of the relative permittivity, εr.. In this case, with a small change from 2.25 to 2.27 through trials 1 to 3, the change in characteristic impedance would be relatively small. So, as εr increases from 2.25 to 2.27, the CPW's characteristic impedance could decrease slightly.Table 4Results for the characteristic impedance of a CPW across three trials.Table 4:Exp #Characteristic impedance (Ω), T1Characteristic impedance (Ω), T2Characteristic impedance (Ω), T3147.5516247.4616247.38162247.501247.411247.3312347.4206947.3306947.25069450.78150.69150.601550.7407750.6507750.56077650.7407950.6507950.57079753.6306853.5406853.45068853.6909353.5909353.50093953.6205153.5305153.430511050.7010350.6110350.521031150.6105750.5305750.440571250.6507550.5607550.480751342.2808742.2108742.130871442.230542.160542.08051542.3411742.2711742.191171649.5807849.4907849.400771749.580849.4907949.400791849.6110149.5210149.431011943.0806543.0106542.930652043.1308243.0508242.980822143.1106343.0306342.960632250.2505550.1605550.070542350.2907250.1907250.100722450.3209850.2309850.140982541.030540.950540.87052641.1511641.0711641.001162741.1108641.0308640.95086 Table 4Results for the characteristic impedance of a CPW across three trials.Table 4:Exp #Characteristic impedance (Ω), T1Characteristic impedance (Ω), T2Characteristic impedance (Ω), T3147.5516247.4616247.38162247.501247.411247.3312347.4206947.3306947.25069450.78150.69150.601550.7407750.6507750.56077650.7407950.6507950.57079753.6306853.5406853.45068853.6909353.5909353.50093953.6205153.5305153.430511050.7010350.6110350.521031150.6105750.5305750.440571250.6507550.5607550.480751342.2808742.2108742.130871442.230542.160542.08051542.3411742.2711742.191171649.5807849.4907849.400771749.580849.4907949.400791849.6110149.5210149.431011943.0806543.0106542.930652043.1308243.0508242.980822143.1106343.0306342.960632250.2505550.1605550.070542350.2907250.1907250.100722450.3209850.2309850.140982541.030540.950540.87052641.1511641.0711641.001162741.1108641.0308640.95086 Results for the characteristic impedance of a CPW across three trials. Across all three trials, it becomes clear that there is no simple or direct relationship between the chosen variables and the characteristic impedance of a CPW. For example, in experiments 3 and 4, a decrease in the Frequency from 12 GHz to 10 GHz resulted in a increase in the CPW's characteristic impedance, changing from 47.42069 Ω to 50.781 Ω. However, itʼs essential to recognize that this correlation doesnʼt consistently apply when comparing experiments 9 and 10, as additional factors also has its affect influencing the characteristic impedance of a CPW. Another example can be seen in the change in Track width (w) from 0.18 mm to 0.2 mm, resulting in an increase in characteristic impedance from 47.55162 Ω to 50.70103 Ω in experiments 1 and 10. However, this straightforward relationship disappears when we analyze experiments 18 and 19, and so on. In analysing the mean values of characteristic impedance data (shown in Table 5) using Taguchi analysis, it becomes clear that the Dielectric Height control factor shows the largest delta function. Consequently, it ranks as the most influential factor. The remaining control factors follow in descendent order of impact: track width, track thickness, gap width, conductor material and conductivity, frequency, backplane thickness, and dielectric conductivity. Fig. 5 provides a graphic illustration of the characteristic impedance responses of the CPW according to the mean value from the Taguchi method, with details corresponding to Fig. 5 summarized in Table 5.Table 5The CPW transmission lines characteristic impedance responses based on data Means values.Table 5:LevelP1P2P3P4P5P6P7P8150.5447.0049.0343.5447.5747.6047.5747.60247.4347.6947.4247.7347.5747.5847.5747.57344.7548.0246.2751.4447.5747.5347.5747.55Delta5.791.022.777.890.000.060.000.05Rank24317586Fig. 5The CPW transmission lines characteristic impedance responses based on means.Fig 5 Table 5The CPW transmission lines characteristic impedance responses based on data Means values.Table 5:LevelP1P2P3P4P5P6P7P8150.5447.0049.0343.5447.5747.6047.5747.60247.4347.6947.4247.7347.5747.5847.5747.57344.7548.0246.2751.4447.5747.5347.5747.55Delta5.791.022.777.890.000.060.000.05Rank24317586 The CPW transmission lines characteristic impedance responses based on data Means values. The CPW transmission lines characteristic impedance responses based on means. The characteristic impedance of a CPW transmission line is determined by the geometry and electrical properties of the structure. While several factors influence the characteristic impedance. The impact of a control factor on the characteristic impedance of CPW transmission line depends on its role in shaping the electromagnetic field distribution within the CPW structure. While the importance of each factor can vary based on specific design considerations, in a given scenario presented in this work, the Dielectric Height control factor have a higher delta function and more pronounced effect compared to other factors .The Dielectric Height represents the distance between the signal trace and the ground plane in a CPW. As this distance increases, the electric field lines become more concentrated between the signal trace and the ground plane, which, in turn, leads to a lower characteristic impedance. Therefore, a variation in dielectric height can have a significant effect on the characteristic impedance, as it directly influences the spatial distribution of the electromagnetic fields. Smaller changes in dielectric height can result in relatively larger changes in impedance compared to other factors, such as track width or gap width. At higher frequencies, electromagnetic field distribution becomes more sensitive to dielectric height due to the shrinking wavelength. Consequently, for high-frequency applications, the dielectric height may have a more significant impact on characteristic impedance. The track width comes in the second place and has a relatively higher effect on it compared to other factors except the The Dielectric Height because it directly affects the distribution of electromagnetic fields within the CPW. The track width is the distance between the center conductor (signal trace) and the nearest ground plane, and it plays a significant role in determining the characteristic impedance of a CPW. A wider track width may allow for a greater separation between the signal trace and the ground plane, which means the electric field lines are more concentrated between the trace and the ground, resulting in a lower characteristic impedance. Conversely, a narrower track width brings the signal trace closer to the ground plane, causing the electric field lines to spread out more, leading to a higher characteristic impedance. Track width has a more pronounced impact on the characteristic impedance of a CPW because it directly controls the distribution of electromagnetic fields between the signal trace and the ground plane. Adjusting the track width can lead to more significant changes in impedance compared to other factors, making it a critical parameter to consider when designing CPW transmission lines for specific applications. Track thickness affects the skin effect and conductor losses within the CPW. While it has an impact on impedance, it tends to be less influential compared to track width and dielectric height. The distance between the signal trace and the neighboring ground plane affects capacitance and, subsequently, impedance. While important, it is generally less influential than track width and dielectric height. The conductivity of the conductor material plays a role in losses but has a relatively smaller impact on characteristic impedance compared to geometric factors. At higher frequencies, the influence of frequency on impedance increases due to changing electromagnetic wave behavior. However, in the list of factors, it has a lesser impact overall. Backplane thickness can impact the effective dielectric constant, affecting impedance. Still, its influence is typically not as pronounced as the above factors. The conductivity of the dielectric material can influence losses but tends to have a minimal effect on characteristic impedance compared to other factors. Fig. 6 displays the main effect screener analysis, illustrating the characteristic impedance data for the CPW transmission line. The Figure presents the average response at every factor level, as well as the total mean response, highlighting notable differences between the averages at various factor levels. These results support the Taguchi analysis of mean values. Although the factor names might differ slightly, their sequence follows the arrangement in Table 1, with the first four factors in the upper row and the next four in the second row. Dielectric height (Dielectr_1) emerges as the most influential factor on the characteristic impedance, followed by track width (Track wi_1), track thickness (Track Th_1), gap width (Gap widt_1), conductor material conductivity (Material_1), frequency (Frequenc_1), backplane thickness (Back Pla_1), and dielectric conductivity (Dielectr_2).Fig. 6CPW transmission lines characteristic impedance data using main effect screener analysis.Fig. 6 CPW transmission lines characteristic impedance data using main effect screener analysis. The agreement between the Taguchi and the main effect screener analyses, indicates a strong and reliable result in this process. When both methods yield similar results, it proposes that the selected parameters and their levels have a strong and liable impact on the CPW transmission line's characteristic impedance. This consistency is essential for optimizing quality and processes, ensuring the reliability of the findings. The convergence of these results boosts confidence in the selected parameter settings, offering a solid basis for making well-informed decisions to improve the overall performance and quality of the process. Table 6 shows the results of the Analysis of Variance (ANOVA) for the average characteristic impedance values in CPW transmission lines. The significance level (α) was fixed at 0.05. The effects of the control factors are ranked using primary statistical measures including's: adjusted sum of squares (Adj SS), adjusted mean square (Adj MS), F-value, and P-value.Table 6Analysis of Variance for CPW transmission lines characteristic impedance.Table 6:TrialSourceDFAdj SSAdj MSF-ValueP-ValueOrderTrial 1Regression8472.09859.012919.290.000Track width (w)(mm)1151.388151.3882358.310.0002Gap width (wg)(mm)14.7534.75374.040.0004Track Thickness (mm)134.69934.699540.540.0003Dielectric Height (h) (mm)1281.225281.2254380.920.0001Back Plane Thickness (tbp)10.0000.0000.000.9717Material Conductivity (S/m)10.0210.0210.320.5765Dielectric conductivity (S/m)10.0000.0000.000.9848Frequency (GHz)10.0120.0120.190.6656Error181.1550.064Total26473.254Trial 2Regression8470.59358.824924.290.000Track width (w)(mm)1150.982150.9822372.360.0002Gap width (wg)(mm)14.7224.72274.190.0004Track Thickness (mm)134.42234.422540.860.0003Dielectric Height (h) (mm)1280.436280.4364406.440.0001Back Plane Thickness (tbp)10.0000.0000.000.9788Material Conductivity (S/m)10.0190.0190.290.5965Dielectric conductivity (S/m)10.0000.0000.000.9717Frequency (GHz)10.0130.0130.200.6576Error181.1460.064Total26471.738Trial 3Regression8469.28658.661920.680.000Track width (w)(mm)1150.635150.6352364.210.0002Gap width (wg)(mm)14.6614.66173.150.0004Track Thickness (mm)134.31134.311538.510.0003Dielectric Height (h) (mm)1279.647279.6474389.050.0001Back Plane Thickness (tbp)10.0000.0000.000.9637Material Conductivity (S/m)10.0200.0200.320.5805Dielectric conductivity (S/m)10.0000.0000.000.9768Frequency (GHz)10.0130.0130.200.6576Error181.1470.064Total26470.433 Table 6Analysis of Variance for CPW transmission lines characteristic impedance.Table 6:TrialSourceDFAdj SSAdj MSF-ValueP-ValueOrderTrial 1Regression8472.09859.012919.290.000Track width (w)(mm)1151.388151.3882358.310.0002Gap width (wg)(mm)14.7534.75374.040.0004Track Thickness (mm)134.69934.699540.540.0003Dielectric Height (h) (mm)1281.225281.2254380.920.0001Back Plane Thickness (tbp)10.0000.0000.000.9717Material Conductivity (S/m)10.0210.0210.320.5765Dielectric conductivity (S/m)10.0000.0000.000.9848Frequency (GHz)10.0120.0120.190.6656Error181.1550.064Total26473.254Trial 2Regression8470.59358.824924.290.000Track width (w)(mm)1150.982150.9822372.360.0002Gap width (wg)(mm)14.7224.72274.190.0004Track Thickness (mm)134.42234.422540.860.0003Dielectric Height (h) (mm)1280.436280.4364406.440.0001Back Plane Thickness (tbp)10.0000.0000.000.9788Material Conductivity (S/m)10.0190.0190.290.5965Dielectric conductivity (S/m)10.0000.0000.000.9717Frequency (GHz)10.0130.0130.200.6576Error181.1460.064Total26471.738Trial 3Regression8469.28658.661920.680.000Track width (w)(mm)1150.635150.6352364.210.0002Gap width (wg)(mm)14.6614.66173.150.0004Track Thickness (mm)134.31134.311538.510.0003Dielectric Height (h) (mm)1279.647279.6474389.050.0001Back Plane Thickness (tbp)10.0000.0000.000.9637Material Conductivity (S/m)10.0200.0200.320.5805Dielectric conductivity (S/m)10.0000.0000.000.9768Frequency (GHz)10.0130.0130.200.6576Error181.1470.064Total26470.433 Analysis of Variance for CPW transmission lines characteristic impedance. To identify the control factors with the most significant impact on the characteristic impedance of a CPW transmission line, higher Adj SS values indicate a stronger effect, while larger F-values suggest that the model (or at least one of its factors) has a meaningful influence. Furthermore, a small P-value indicates that the control factors (or at least one) significantly impact the characteristic impedance. Together, these statistical measures help determine which control factors should be prioritized for optimization or adjustment to enhance the CPW transmission line's performance. Importantly, these ANOVA results closely match the findings from the Taguchi analysis and the main effect screener analysis in both trials 1 and 3. The only exception occurred in trial 2, where two control factors—the backplane thickness and dielectric conductivity—showed some discrepancy. However, this difference is negligible, as these two factors were found to have the smallest effects on the CPW transmission line's characteristic impedance according to the Taguchi and main effect screener analyses. With an R-squared value of 99.49 %, this indicates a strong fit, highlighting that the model accurately captures the variability in the data. R-squared is an important measure for evaluating the model's effectiveness in explaining the data. Table 8 displays the outcomes of a multivariable linear regression analysis conducted to assess the influence of control factors on the characteristic impedance of CPW transmission lines. Control factors with greater coefficients exert a stronger impact on the characteristic impedance. The primary factor with the most significant impact is the dielectric height, and the negative sign indicates an inverse relationship. Specifically, when the dielectric height is increased, the characteristic impedance decreases. The findings presented in Table 7 align with previous results obtained through Taguchi analysis, main effect screening, and ANOVA for the top four dominant control factors. However, the multivariable linear regression analysis reveals distinct results and a different order for the remaining control factors ranked from 5 to 8. This serves to corroborate the earlier findings, as Taguchi ANOVA analysis did not yield a definitive conclusion regarding which of these non-dominant factors exerts a stronger or weaker influence relative to the others. Nevertheless, it is evident that the control factors comprising backplane thickness, material conductivity, dielectric conductivity, and frequency have a comparatively minor impact on the characteristic impedance of CPW transmission lines in comparison to the more dominant factors.Table 7Multivariable linear regression analysis.Table 7:TermTrial 1Trial 2Trial 3CoefficientOrderCoefficientOrderCoefficientOrderConstant48.94148.85048.790Track width (w)(mm)−145.002−144.812−144.642Gap width (wg)(mm)25.69425.61425.444Track Thickness (mm)−138.843−138.293−138.063Dielectric Height (h) (mm)395.271394.711394.161Back Plane Thickness (tbp)0.2260.1760.286Material Conductivity (S/m)−0.0000008−0.0000008−0.0000008Dielectric conductivity (S/m)2.1915954.0265953.359315Frequency (GHz)−0.01317−0.01347−0.01347 Table 7Multivariable linear regression analysis.Table 7:TermTrial 1Trial 2Trial 3CoefficientOrderCoefficientOrderCoefficientOrderConstant48.94148.85048.790Track width (w)(mm)−145.002−144.812−144.642Gap width (wg)(mm)25.69425.61425.444Track Thickness (mm)−138.843−138.293−138.063Dielectric Height (h) (mm)395.271394.711394.161Back Plane Thickness (tbp)0.2260.1760.286Material Conductivity (S/m)−0.0000008−0.0000008−0.0000008Dielectric conductivity (S/m)2.1915954.0265953.359315Frequency (GHz)−0.01317−0.01347−0.01347 Multivariable linear regression analysis. In this case study, the goal is to design CPW transmission lines with a characteristic impedance of 60 Ω by fine-tuning the control factors used in the experiment. The regulation procedure begins with experiment number 9, as outlined in Table 2 and further detailed in Table 8. What was originally a trial-and-error method is now much more efficient, because of the understandings from the Taguchi analysis, which clarifies how each factor influences the characteristic impedance of the CPW transmission lines.Table 8CPW transmission lines design trials with characteristic impedance of 60 Ω.Table 8:TrialP (1)P(2)P(3)P(4)P(5)P(6)P(7)P(8)Characteristic impedance (Ω)1st (expe # 9)0.180.140.030.080.0359,800,0001E−161053.620512nd0.17↓0.140.030.09↑0.0359,800,0001E−161058.82053ed0.170.16↑0.030.090.0359,800,0001E−161059.420494th0.170.18↑0.030.090.0359,800,0001E−161059.970475th0.170.181↑0.030.090.0359,800,0001E−161059.980476th0.170.184↑0.030.090.0359,800,0001E−161060 Table 8CPW transmission lines design trials with characteristic impedance of 60 Ω.Table 8:TrialP (1)P(2)P(3)P(4)P(5)P(6)P(7)P(8)Characteristic impedance (Ω)1st (expe # 9)0.180.140.030.080.0359,800,0001E−161053.620512nd0.17↓0.140.030.09↑0.0359,800,0001E−161058.82053ed0.170.16↑0.030.090.0359,800,0001E−161059.420494th0.170.18↑0.030.090.0359,800,0001E−161059.970475th0.170.181↑0.030.090.0359,800,0001E−161059.980476th0.170.184↑0.030.090.0359,800,0001E−161060 CPW transmission lines design trials with characteristic impedance of 60 Ω. The aim is to fine-tune the CPW transmission lines to achieve a characteristic impedance of 60 Ω. To reach this goal, a model from experiment number 9, which initially has a characteristic impedance of approximately 53.62051 Ω, is selected. A key control parameter with a significant impact is adjusted, resulting in a CPW transmission line with a characteristic impedance of 59.42049 Ω. Subsequently, factors with smaller effects are modified until the target characteristic impedance of 60 Ω is achieved. CPW transmission lines, characterized by a 60 Ω impedance as described in Table 8, underwent simulation utilizing COMSOL Multiphysics version 5.4 software. The simulation results, presented in Table 9, reveal that the characteristic impedance corresponds to the magnitude of the rectangular form (59.999 - 0.23928i), which is effectively equivalent to 60 Ω.Table 9The CPW transmission lines with characteristic impedance of 60 Ω simulation results.Table 9:Distributed resistance (R) (Ω/m)Distributed inductance (L) (H/m)Shunt conductance (G) (S/m)Capacitance (C) (F/m)Characteristic impedance (Zc) (Ω)Propagation constant (1/m)133.692.6676E−72.8880E−167.4103E−1159.999 - 0.23928i1.1141 + 279.36i Table 9The CPW transmission lines with characteristic impedance of 60 Ω simulation results.Table 9:Distributed resistance (R) (Ω/m)Distributed inductance (L) (H/m)Shunt conductance (G) (S/m)Capacitance (C) (F/m)Characteristic impedance (Zc) (Ω)Propagation constant (1/m)133.692.6676E−72.8880E−167.4103E−1159.999 - 0.23928i1.1141 + 279.36i The CPW transmission lines with characteristic impedance of 60 Ω simulation results. Fig. 7 below shows the distribution of electric potential, electric field, and magnetic flux density through CPW transmission lines with a characteristic impedance of 60 Ω, where it is of paramount importance for understanding their behavior in high-frequency and microwave applications. The Electric Potential Distribution is shown in the colors where its varies between 0 and 1, the Black line color is for the Magnetic Flux Density and the Green line color is for the Electric FieldFig. 7The electric potential, electric field, and magnetic flux density of CPW transmission lines possessing a characteristic impedance of 60 Ω.Fig. 7 The electric potential, electric field, and magnetic flux density of CPW transmission lines possessing a characteristic impedance of 60 Ω. In CPW transmission lines, the electric potential distribution is a key parameter that ensures the controlled propagation of signals. In this case, with a characteristic impedance of 60 Ω, the electric potential is designed to remain relatively constant between the center conductor and the surrounding ground plane. This uniform electric potential distribution is vital for maintaining the desired impedance level and preventing signal distortion or reflections. As signals propagate along the CPW, the electric potential exhibits a quasi-TEM (Transverse ElectroMagnetic) field behaviour. This signifies that the electric potential mainly fluctuates in the lateral direction, specifically between the central conductor and the ground plane, while exhibiting a comparatively stable profile along the transmission line's extent. This consistency aids in the reduction of signal losses and guarantees the retention of the CPW's characteristic impedance of 60 Ω. The distribution of the electric field within CPW transmission lines closely mirrors the distribution of electric potential. The most concentrated electric field is situated in the area between the central conductor and the ground plane. This pronounced containment of the electric field is a unique feature of CPW and serves a vital role in preventing signal radiation and crosstalk. With a characteristic impedance of 60 Ω, the distribution of the electric field remains exceptionally consistent, which is essential for upholding signal integrity. This uniformity ensures that the energy associated with the signal remains tightly enclosed within the CPW structure. Furthermore, this field distribution aids in diminishing losses, particularly at higher frequencies, and enhances the efficiency of signal transmission. Within CPW transmission lines, the magnetic flux density is relatively low when compared to other types of transmission lines, primarily due to the inherent design characteristics of CPWs. The magnetic field is primarily focused on the dielectric material that separates the central conductor from the ground plane. The CPW's ground plane functions as a protective shield, containing the magnetic flux and diminishing its interaction with external elements or neighbouring transmission lines. At a characteristic impedance of 60 Ω, the magnetic flux density distribution remains uniform. This uniformity is of paramount importance in managing electromagnetic interference and mitigating the potential for unintended radiation. Equally critical is its role in minimizing any adverse effects on nearby circuits or components, thus guaranteeing the preservation of signal integrity within the CPW transmission lines. Limitations Not applicable Ethics Statement This study does not involve any research involving human or animal subjects by the authors. The datasets utilized are publicly available, and it is important to follow the appropriate citation guidelines when using these datasets. CRediT Author Statement Mohd H.S Alrashdan: The conception and design of the study, data analysis and interpretation, drafting of the article, and critical revisions for significant intellectual content were all part of the process, culminating in the approval of the final version. Declaration of competing interest The author declares that they have no conflicting financial interests or personal relationships that could have influenced the research presented in this paper.