Research on cuttings and flower yield improvement of marigold cv. Siracole for sustainable production through Jeevamrit application Authors: Nitesh Kaushal, Bharati Kashyap, Balbir Singh Dilta Published: 2024 ABSTRACT A sustainable approach of farming involves using desi-cow waste products helps to improve soil biology. Jeevamrit, a traditional biofertilizer, enhances soil health and organic carbon and also reduces the need for farmyard manure, hence minimizing carbon footprint and supports eco-friendly agriculture. The present study investigated the effectiveness of Jeevamrit compared to chemical fertilizers and growth regulators for maintaining a healthy mother block of marigold. Jeevamrit was applied at a rate of 2 L per square meter every 15 days in the mother block. A comprehensive evaluation of seven nutritional and growth regulator modules was conducted across five harvesting flushes (H1, H2, H3, H4, and H5), with subsequent planting occurring in both summer and winter, and vegetative parameters compared to other treatments. Comparing cuttings from various treatments, Jeevamrit-treated plants had higher diameter (3.64 mm), rooting percentage (77.62 %), roots per cutting (35.46), survival rate (81.59 %), faster rooting (14.90 days), the microbial analysis shows a higher microbial population i.e. bacterial (18.27 × 105 cfu g−1 Soil), fungal (3.64 × 103 cfu g−1 Soil), and actinomycetes (3.12 × 103 cfu g−1 Soil) in soil and a higher uptake of N (17.73 kg ha −1), P (9.48 kg ha −1), and K (15.03 kg ha −1) by plants resulting into better growth and development. Yet, the highest cutting yield per plant (92.92) and m−2 (826.64) was observed with foliar application of benzyl adenine @ 100 ppm combined with N-P-K @ 30:20:20 g/m2. Among the harvesting flushes, H4 yielded the highest number of cuttings per plant (109.39) and per square meter (973.34). In contrast, H1 achieved the best results for rooting percentage (81.90 %), number of roots per cutting (29.78), survival percentage (78.07 %), and the shortest rooting time (14.49 days). Additionally, H3 showed the highest microbial activity, with viable bacterial counts at 14.38 × 105 cfu g−1, fungal counts at 3.56 × 103 cfu g−1, actinomycetes at 2.84 × 103 cfu g−1, and organic carbon content at 0.97 %. Under the second experiment the plants grown under natural farming produce more number (0.76 %) and yield of marketable flowers per plant (3.77 %) over recommended dose of fertilizers. The study concludes that while Jeevamrit significantly enhances plant growth and soil health, the combination of benzyl adenine with a balanced N-P-K fertilizer results in higher cutting yield. Moreover, Jeevamrit has been identified as an effective alternative to chemical fertilizers for the cultivation of marigold, specifically in the production of cuttings and flowers. Introduction Tagetes erecta L. belongs to the Asteraceae family and is commonly found in mountainous regions and tropical climates, mainly in South America. The genus Tagetes consists of over 50 species, with T. erecta, T. tenuifolia, T. lunata, and T. patula being the most widely cultivated worldwide [1]. In Brazil, T. erecta is commonly referred to as marigold, while in Mexico, Central America, and other parts of South America, it is known by various names such as cempasúchil, amarillo, yellow carnation, and flor de muerto [1]. Due to the intense yellow to orange coloration, the flowers are used in various industries, due to the high concentration of the carotenoid lutein [[2], [3], [4]]. The flowers of marigold are also used as an ingredient in salads and as a natural food colorant, since it is one of the most popular edible flowers all over the world [5]. Flowers are utilized in various applications, including pharmaceuticals, processed foods, confectionery, and the poultry industry. Notably, one of the most significant benefits of these plants is their role as a valuable intercrop for the control of plant-parasitic nematodes and their insecticidal properties [6]. The cultivar ‘Siracole’ (commonly called as ‘Laddu Gainda’ in India), which was identified in Eastern India [7]. The main specialty of this cultivar is uniform size of flowers and bushy growth of foliage. Due to uniform size of flower and higher yield, this variety is in great demand and fetched higher prices in the market. Marigold cultivar ‘Siracole’ is mainly propagated by terminal stem cuttings for which a mother block is raised from which cuttings for rooting are taken. Maintenance of mother block of marigold is of utmost importance as only a healthy mother block can supply healthy cuttings, for getting higher yield. The marigold cultivar ‘Siracole’ is primarily propagated through cuttings rather than seeds due to several advantages that enhance its cultivation efficiency and reliability. Cuttings ensure genetic consistency, allowing new plants to be genetically identical to the parent, thereby preserving desirable traits such as flower color, size, and disease resistance [8]. This method facilitates rapid establishment with faster root development and earlier flowering, which is especially beneficial for commercial growers seeking a timely return on investment [9]. Additionally, plants propagated from cuttings demonstrate greater uniformity in growth patterns and flowering times, crucial for landscape design and aesthetic consistency [10]. Moreover, certain traits that confer disease resistance in ‘Siracole’ can be more reliably transferred through cuttings, as opposed to the genetic variability encountered with seeds. Furthermore, the exclusivity of some cultivars under patent protection necessitates the use of cuttings to maintain control over production. Finally, the cuttings method is typically less resource-intensive, reducing production costs and minimizing environmental impact. Overall, these factors make cutting propagation the preferred choice for both commercial growers and researchers working with ‘Siracole’. There is only a scanty literature available on maintenance of mother block, therefore under the present studies the effect of different doses of nutrients and growth regulators viz. Jeevamrit, NPK, BA and GA3 were assessed for cutting production in marigold. The application of Gibberellic Acid (GA3) on marigold (Tagetes spp.) hold significant importance in influencing shoot morphology, including parameters such as shoot length and shoot weight. Gibberellic acid (GA3) is a crucial plant hormone that regulates multiple facets of plant growth and development. In the context of plant responses to heavy metal contamination, GA3 has been shown to have a significant impact on plant physiology and biochemistry. The application of GA3 significantly enhances plant length, fresh and dries mass, leaf chlorophyll contents, ionic contents, and yield [11,12]. Gibberellic acid promotes the growth of roots, shoots, and leaf number by modifying the mechanisms of cell division and cell elongation [13]. GA3 application also enhances total chlorophyll content in plant [14]. Benzyladenine (BA), a cytokinin classified as a plant growth regulator, plays a pivotal role in promoting basal shoot proliferation. Its effects include the stimulation of cell division, cell elongation, and shoot initiation, which collectively enhance plant growth. Additionally, BA facilitates nutrient mobilization and delays senescence, while also modulating apical dominance, thereby promoting lateral shoot growth [15]. Previous studies have demonstrated that the application of benzylaminopurine (BA), a synthetic plant hormone, can induce multiple branching and control flowering time in Veronica dahurica Steven, as reported by Kim et al. [16]. Jeevamrit, an economically viable and ecologically friendly fermented organic formulation, is prepared from cow-derived substances, namely dung, urine, as well as additional components such as gram flour and jaggery. Cow urine, containing antifungal properties and serving as a valuable reservoir of plant nutrients, forms a key constituent of Jeevamrit. This preparation serves as an effective enhancer of plant growth with versatile application methods [17]. The utilization of various fermented liquid organic formulations further underscores their efficacy in bolstering soil fertility through the amplification of soil microorganism and fauna activities. This formulation substantially catalyzes biological processes within the soil, demonstrated by its capacity to foster an elevated abundance of beneficial microorganisms [18]. Sustainable agriculture practices minimize environmental impact are crucial for maintaining soil health and also promote plant growth. One such approach involves the utilization of desi-cow waste products, i.e. Jeevamrit, a traditional biofertilizer that has been shown to enhance soil biology, and reduce the need for farmyard manure [19]. This not only supports eco-friendly agriculture but also provides the essential nutrients required for growth and development of plant, which rely on compounds like Benzyladenine, gibberellic acid, nitrogen, phosphorus, and potassium [20]. The farmers of Himachal Pradesh currently purchase cuttings of marigold from West Bengal, India, highlighting the need to standardize nutrient requirements and produce local planting material. To address this issue, our study investigates the efficacy of Jeevamrit compared to conventional chemical fertilizers and growth regulators in maintaining a healthy mother block of marigold. Furthermore, we examine the comparative effect of these two approaches on the flower yield of marigold. By comparing the effect of Jeevamrit and chemical fertilizers, we aim to provide insights into the potential of this natural fertilizer to promote healthy plant growth and optimize flower production. Material and methods The investigation was carried out in the Department of Floriculture and Landscape Architecture at the Experimental Research Farm of Dr. YS Parmar University of Horticulture and Forestry, Nauni, Solan, Himachal Pradesh, India during the summer and winter seasons of 2022-23 and 2023-24. The Experimental farm of the department is located in the hilly regions of Western Himalayas at an altitude of 1276 m above mean sea level having latitude of 30° 52′02″ N and longitude 70°11′30″E. Approximately 75 % of the regional average annual rainfall, totaling 1115 mm, is received during the monsoon season, which extends from mid-June to mid-September. Fig. 1, Fig. 2 displays the meteorological data collected during the experiment. The experiment followed a randomized block design (RBD) factorial layout.Fig. 1Metrological data during January 2022–December 2022.Fig. 1Fig. 2Metrological data during January 2023–January 2024.Fig. 2 Metrological data during January 2022–December 2022. Metrological data during January 2023–January 2024. Experiment-I: Effect of different nutritional and growth regulator modules of the mother plants on cutting production of marigold In the first year (2022-23), a comprehensive evaluation of seven nutritional and growth regulator modules was conducted across five harvesting flushes (H1, H2, H3, H4 and H5). The mother blocks of marigold cultivar ‘Siracole’ were raised for two seasons, summer and winter, and received different treatment modules as outlined in Table 1. The cuttings were planted in plug trays for rooting in a propagation chamber. After rooting, the cuttings were transplanted into the field and evaluated for establishment and survival for one month in the field.Table 1Experiment-I: Details of nutritional and growth regulator modules used in Experiment-I.Table 1TreatmentsTreatment detailsT1RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation)T2T1 + GA3 @ 100 ppmT3T1 + BA @ 100 ppmT4T1 + GA3 @ 100 ppm + BA @ 100 ppmT5Jeevamrit @ 2 L m−2 (drench at 15 days interval)T6T1 + Urea @ 1000 ppm (drench at 15 days interval)T7T1 + Urea @ 1500 ppm (drench at 15 days interval) Table 1Experiment-I: Details of nutritional and growth regulator modules used in Experiment-I.Table 1TreatmentsTreatment detailsT1RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation)T2T1 + GA3 @ 100 ppmT3T1 + BA @ 100 ppmT4T1 + GA3 @ 100 ppm + BA @ 100 ppmT5Jeevamrit @ 2 L m−2 (drench at 15 days interval)T6T1 + Urea @ 1000 ppm (drench at 15 days interval)T7T1 + Urea @ 1500 ppm (drench at 15 days interval) Experiment-I: Details of nutritional and growth regulator modules used in Experiment-I. Harvesting methodology for cuttings Timing of harvesting The initial harvesting phase begins precisely 45 days post-planting of the mother block. This waiting period allows adequate time for the plants to mature and produce the desired yield. Following the first harvest, subsequent flushes are harvested at an interval of seven days. This approach maximizes the yield from each mother block while ensuring the quality and freshness of the cuttings. Prior to harvesting, the mother block is irrigated to maintain the turgidity of the cuttings, with harvesting conducted during cooler hours of the day, preferably in the morning or evening. Preparation for harvesting Prior to commencement of the harvest, it is essential to evaluate the crops' readiness based on visual indicators such as length and diameter. All necessary tools and equipment must be prepared and sanitized to reduce the risk of contamination and damage to the crops. Given the delicate nature of marigold cuttings, scissors are employed for both harvesting and preparation. Harvesting process Harvesting begins with the initial set of crops that demonstrate readiness for collection. Cuttings are meticulously excised from their respective stems to prevent damage to adjacent branches, and cuts are specifically made below the second node of the stem. The rationale for cutting below the second node of cuttings is twofold. First, this location contains a higher concentration of vascular tissue and meristematic cells, which promotes robust root development. Second, it preserves the cuttings' ability to generate new growth, enhancing their viability and success in propagation. Thus, this method optimizes the health and productivity of subsequent crop yields. Following the initial round of harvesting, records of the volume and quality of the cuttings are meticulously documented. This data is crucial for evaluating yield and planning future harvesting activities. Harvesting is conducted at seven day intervals, during which the growth and readiness of the crops are closely monitored for the next flush. Post-harvest handling Once harvested, the crops are transported immediately to the processing area. It is essential that they are cleaned, sorted, and prepared for rooting. Any signs of spoilage or damage should be carefully examined during the sorting process, with substandard crops being discarded according to quality standards. Prior to planting in a growth medium composed of cocopeat, perlite, and sand (in a 1:1:1 ratio), the cuttings are treated with fungicides, specifically Dithane M 45 and Bavistin, each at a concentration of 0.2 % for a duration of 15 min. Subsequently, the cuttings are treated with a solution of NAA at a concentration of 500 ppm for 5 s before being placed in the propagation chamber for rooting. This methodology ensures that the harvesting of cuttings from the mother block is conducted efficiently and effectively, ultimately leading to improved yields and quality of crops in future planting cycles. Maintenance of mother block Establishment of Mother Block: After the cuttings had successfully rooted, they were transplanted into well-prepared beds in the research field. The experimental beds were consistently maintained at a height of 20 cm, with each bed measuring one square meter in area. Fertilizers and Jeevamrit were applied according to the established technical program (Table 1), ensuring that the plants received the necessary nutrients for optimal growth and development. A spacing of approximately 30 × 30 cm between plants was maintained to facilitate air circulation and sunlight penetration. Disbudding Practice: Regular disbudding was implemented to prevent flowering and focus the plant's energy on vegetative growth, thereby producing healthy and viable cuttings. The disbudding practice commenced 30 days after the establishment of the mother block. Frequency: Disbudding was performed daily, where developing flower buds were carefully removed from the plants. This process was crucial to ensure that all resources were diverted towards the growth of foliage and root systems, enhancing the overall health of the mother plants. Technique: Disbudding was performed manually to minimize the risk of injury to the plants and reduce the likelihood of infection. Careful attention was given to ensure that only the flower buds were removed, while the surrounding leaves and the integrity of the stems were preserved. This systematic approach ensured that the Marigold cultivar Siracole maintained optimal growth conditions, facilitating the production of high-quality cuttings for further propagation. In this experiment, seven distinct treatments were implemented during both summer and winter seasons to assess their effects on quality cutting production. Farmyard manure (FYM) @ 5 kg m−2 was used in both treatments at the time of field preparation. In this study, we incorporated RDF (Recommended Dosage of Fertilizers) comprising urea, single super phosphate (SSP), and muriate of potash (MOP) into the soil during the field preparation phase across individual plots. A split application of urea was employed, where the first half was applied at the time of field preparation. The remaining half was administered in two subsequent splits: the first application occurred one month after transplanting, followed by the final application one month after the first, coinciding with the late vegetative stage to early flowering period. In addition, a foliar application of gibberellic acid (GA3) at 100 ppm and benzyladenine (BA) at 100 ppm was carried out, and drench applications of nitrogen at concentrations of 1000 ppm and 1500 ppm every 15 days. This was conducted three times, commencing 20 days after the planting of the mother block. Jeevamrit, a traditional organic amendment, was also applied as a drench at a rate of 2 L m−2 at 15-day intervals during the entire growing season. In this experiment, seven distinct treatments were implemented during both the summer and winter seasons to evaluate their effects on quality cutting production. Farmyard manure (FYM) was incorporated into the soil at a rate of 5 kg m2 during field preparation for each treatment. In addition, the recommended dose of fertilizers (RDF), comprising urea, single super phosphate (SSP), and muriate of potash (MOP), was applied to the soil at the time of plot preparation. Urea was administered in split doses: half of the total amount was applied during field preparation, while the remaining half was split into two subsequent applications. The first of these was carried out one month after transplanting, and the second one month later, coinciding with the late vegetative to early flowering stage. Additionally, a foliar application of gibberellic acid (GA3) at a concentration of 100 ppm and benzyladenine (BA) at 100 ppm was conducted. Drench applications of nitrogen at concentrations of 1000 ppm and 1500 ppm were made every 15 days for a total of three applications, beginning 20 days after planting the mother block. Furthermore, Jeevamrit, a traditional organic amendment, was applied as a drench three times during the growing season, at a rate of 2 L per square meter, with 15-day intervals between applications. Experiment-II: comparative effect of Jeevamrit and chemical fertilizers on flowering parameters Based on the results of Experiment-I, the best treatment (i.e. T5) was selected to raise the mother block for sequential harvesting of cuttings (H1, H2 and H3). These cuttings were then rooted and evaluated for flowering parameters. The study compared the results of natural farming practices with the recommended dose of fertilizers, which consists of nitrogen (N), phosphorus (P), and potassium (K) @ 30:20:20 g/m2. The details of the nutritional modules are shown in Table 2. Before the start of the experiment, chemical characteristics of soil were assessed (Table 3).Table 2Details of nutritional modules used in Experiment-II.Table 2TreatmentsTreatment detailsT1Jeevamrit @ 2 l m−2 (drench at 15 days interval)T2RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation)Table 3Initial soil characteristics.Table 3ParticularSeason-ISeason-IIReferencespH6.936.76[21]EC (dS/m)1.020.95[21]OC (%)0.780.91[22]Available N (kg/ha)262.57282.39[23]Available P (kg/ha)52.5657.52[24]Available K (kg/ha)395.45402.27[25] Table 2Details of nutritional modules used in Experiment-II.Table 2TreatmentsTreatment detailsT1Jeevamrit @ 2 l m−2 (drench at 15 days interval)T2RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation) Details of nutritional modules used in Experiment-II. Table 3Initial soil characteristics.Table 3ParticularSeason-ISeason-IIReferencespH6.936.76[21]EC (dS/m)1.020.95[21]OC (%)0.780.91[22]Available N (kg/ha)262.57282.39[23]Available P (kg/ha)52.5657.52[24]Available K (kg/ha)395.45402.27[25] Initial soil characteristics. In this experiment, two distinct treatments were implemented during both summer and winter seasons to assess their effects on plant growth and yield. The first treatment involved the application of Jeevamrit at a rate of 2 L per square meter, administered as a drench every 15 days over a span of three applications, beginning 20 days after planting the rooted cuttings. This organic approach aimed to enhance soil health and improve plant performance through natural inputs. In contrast, the second treatment utilized a recommended dose of fertilizers (RDF) that included urea, single super phosphate (SSP), and muriate of potash (MOP). These fertilizers were incorporated into the soil during the field preparation phase for their respective plots. A split dosage of urea was employed, with the first half applied at the time of field preparation and the second half divided into two applications: one after one month of transplanting and the final application after another month, coinciding with the late vegetative stage to early flowering. Together, these treatments provided a comprehensive approach to nutrient management, allowing for a comparison between natural and conventional fertilization methods in optimizing plant growth and productivity. Preparation of Jeevamrit Jeevamrit was prepared by combining 10 kg of cow dung, 10 L of cow urine, 2 kg of black jaggery, 2 kg of flour made from black chickpeas, and a handful of soil (approximately 100 g) to serve as microbial inoculum. The total volume of the mixture was then adjusted to 200 L by adding water. The mixture was stirred twice daily in a clockwise direction. On the fifth day, the solution was filtered, and the resulting filtrate was utilized for soil drenching. Jeevamrit was applied to the soil at a rate of 2 L per square meter at intervals of 15 days. The first application was applied 20 days after the planting of the cuttings, with the final two applications made 15 days apart following the initial treatment. The nutrient composition and microbial load of the Jeevamrit are presented in Table 4.Table 4Nutrient status and microbial load in Jeevamrit.Table 4ParameterNutrient statuspH7.5EC (dSm−1)4.8N (%)1.85P (%)0.25K (%)0.30Bacteria (cfu)17.8 × 105Fungi (cfu)13.4 × 105Actinomycetes (cfu)8.5 × 105Mg (ppm)45Cu (ppm)1.62Zn (ppm)4.38Mn (ppm)9.50Fe (ppm)185 Table 4Nutrient status and microbial load in Jeevamrit.Table 4ParameterNutrient statuspH7.5EC (dSm−1)4.8N (%)1.85P (%)0.25K (%)0.30Bacteria (cfu)17.8 × 105Fungi (cfu)13.4 × 105Actinomycetes (cfu)8.5 × 105Mg (ppm)45Cu (ppm)1.62Zn (ppm)4.38Mn (ppm)9.50Fe (ppm)185 Nutrient status and microbial load in Jeevamrit. Sample collection and measurement of soil chemical properties Soil samples were collected from each plot to a depth of 15 cm using a soil auger, both prior to planting and after harvesting the crop. To create a composite sample, soil was collected from multiple locations within each plot. The excess soil was then quartered, and 500 g was retained for analysis. The remaining two quarters were mixed again, and this quartering process was repeated until only 500 g of soil remained. For chemical analysis, the soil samples were ground and sieved through a 2 mm mesh screen, and subsequently placed in cotton bags to air dry. Soil pH and electrical conductivity (EC) were measured using a conductivity meter. Soil parameters Organic carbon content was estimated using the Walkley-Black method [22].To obtain actual percentage of organic carbon by Walkley and Black method, organic carbon should be multiplied by a factor 100/77 i.e. 1.3 (77 % being the average recovery factor). In Experiment I, soil sampling was conducted after each harvesting flush during both growing seasons. Microbiological properties of soil The microbiological properties of the soil were analyzed following the completion of the trial for each treatment. The quantification of viable microbes was carried out using the nutrient agar (NA) for bacterial count, potato dextrose agar medium (PDA) for fungal count, and Kenknight and Munaier's medium (KNM) for actinomycetes count, using the standard spread plate technique with serial dilutions [26]. The population was measured in terms of colony-forming units (cfu) per gram of soil and the assessment of microbial biomass-C was done using the soil fumigation extraction method [27].(1)MB−Cμgg−1soil=EC(F)−EC(UF)KWhere, K = 0.25 ± 0.05 (factor which represents the efciency of extraction of microbial biomass carbon) EC (F) = Total amount of extractable carbon in fumigated soil samples. EC (UF) = Total amount of extractable carbon in unfumigated soil samples. The 2, 3, 5-triphenyl tetrazolium chloride (TTC) reduction method was used to estimate the dehydrogenase activity in liquid formulations [28]. The estimation of phosphatase activity was carried out using the procedure outlined by Tabatabai and Bremner [29]. N, P and K uptake The composite samples of five plants from each plot were selected randomly before the opening of flower [30]. The N, P, and K content in the plant tissue was multiplied by the corresponding biomass, expressed on a dry weight basis, to calculate the nutrient uptake in kilograms per hectare (kg ha⁻1).(2)Biomass(kg/ha)=Weightofdryplant×10,000Areacoveredbytheplant×1000(3)NutrientUptake(kg/ha)=Biomass(kg/ha)×Nutrientcontent(%)100 Statistical analysis Field experiments were conducted with three replications, consisting of nine plants per replication, and were designed using a Randomized Complete Block Design (RBD). For Experiment-I, a three-way analysis of variance (ANOVA) was conducted to evaluate the interactions among two growing seasons, five harvesting flushes, and seven treatments. Comparisons of the interactions were made at a significance level of 0.05. The data collected during this experiment were statistically analyzed using Microsoft Excel 2010 and SPSS Version 16.0. In Experiment Two, a similar approach was employed, featuring two growing seasons, two treatments, and three harvesting flushes. The analysis was again conducted using a three-way ANOVA to assess the interactions among the different factors, with significance tested at the same level of 0.05. Statistical analyses were carried out using Microsoft Excel 2010 and SPSS Version 16.0. Results Experiment-I: Effect of different nutritional and growth regulator modules on cuttings of marigold Effect of seasons The data pertaining in Table 5 shows the positive effect of summer season on growth and development of plant due the favorable climate during summer (i.e. temperature, light and humidity) results into higher metabolism and nutrient uptake of plants. The mother block of marigold grown during summer season resulted into more length (10.95 cm), diameter (3.59 mm), number of cuttings per plant (90.47) and yield of cuttings per square meter (805.00).Table 5Effect of nutritional and growth regulator treatments on cutting parameters.Table 5S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanLength of cutting (cm)T19.195.817.507.757.817.867.486.60H110.538.759.64T212.288.8910.5810.8310.8910.9410.569.69H211.108.309.70T39.026.627.828.078.138.187.806.92H311.737.779.75T411.147.899.529.779.839.889.508.62H411.397.359.37T510.747.669.209.459.519.569.188.30H59.967.038.50T612.258.8610.5510.8010.8610.9110.539.66T712.019.1210.5710.8210.8810.9310.559.67Mean10.957.84--CD 5 %S: 0.12T: 0.22S × T: 0.31H: 0.18S × H: 0.26T × H: 0.48Mean SES: 0.04T: 0.08S × T: 0.11H: 0.07S × H: 0.09T × H: 0.17Diameter of cuttings (mm)T13.683.013.353.423.673.383.332.95H13.712.953.33T23.382.713.053.123.373.083.032.65H24.133.023.57T33.632.963.303.373.623.333.282.90H33.682.903.29T43.833.163.503.573.823.533.483.10H43.592.883.23T53.983.313.643.723.963.683.623.24H52.842.872.85T63.082.412.752.823.072.782.732.35T73.532.863.203.273.523.233.182.80Mean3.592.92-CD 5 %S: 0.02T: 0.04S × T: 0.05H: 0.03S × H: 0.04T × H: 0.08Mean SES: 0.01T: 0.01S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03Total number of cuttings per plantT166.4532.3749.4110.533.7158.3378.8965.61H118.2412.4415.34T281.8343.762.7613.643.3275.0998.4283.39H263.8533.648.72T3116.5469.2992.9220.665.02112.92142.50123.54H3108.5560.4784.51T4107.1262.3484.7318.759.13102.65130.53112.64H4141.1177.67109.39T5111.5865.6488.6119.661.92107.52136.20117.81H5120.6166.1793.39T671.9136.3954.1511.637.1264.2885.8271.92T777.8640.7859.3212.840.8470.7693.3878.81Mean90.4750.07-CD 5 %S: 0.49T: 1.00S × T: 1.27H: 0.76S × H: 1.07T × H: 2.01Mean SES: 0.17T: 0.32S × T: 0.46H: 0.27S × H: 0.39T × H: 0.72Yield of cuttings per meter squareT1591.42288.04439.7393.45300.01519.15702.12583.93H1162.33110.71136.52T2728.24388.91558.58121.04385.54668.27875.87742.17H2568.14298.90433.52T31036.86616.42826.64183.27578.451004.621267.761099.09H3965.83538.02751.93T4952.68554.37753.53166.29525.83912.881160.881001.75H41255.58691.10973.34T5993.07584.15788.61174.44551.08956.901212.161048.46H51073.15588.75830.95T6640.00323.86481.93103.24330.38572.10763.82640.12T7692.74362.74527.74113.88363.34629.58830.79701.12Mean805.00445.50-CD 5 %S: 5.12T: 9.58S × T: 13.55H: 8.10S × H: 11.45T × H: 21.42Mean SES: 1.85T: 3.46S × T: 4.89H: 2.92S × H: 4.13T × H: 7.73cm: centimeters, S: seasons, mm: millimeters, H: Harvesting Flushes, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 5Effect of nutritional and growth regulator treatments on cutting parameters.Table 5S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanLength of cutting (cm)T19.195.817.507.757.817.867.486.60H110.538.759.64T212.288.8910.5810.8310.8910.9410.569.69H211.108.309.70T39.026.627.828.078.138.187.806.92H311.737.779.75T411.147.899.529.779.839.889.508.62H411.397.359.37T510.747.669.209.459.519.569.188.30H59.967.038.50T612.258.8610.5510.8010.8610.9110.539.66T712.019.1210.5710.8210.8810.9310.559.67Mean10.957.84--CD 5 %S: 0.12T: 0.22S × T: 0.31H: 0.18S × H: 0.26T × H: 0.48Mean SES: 0.04T: 0.08S × T: 0.11H: 0.07S × H: 0.09T × H: 0.17Diameter of cuttings (mm)T13.683.013.353.423.673.383.332.95H13.712.953.33T23.382.713.053.123.373.083.032.65H24.133.023.57T33.632.963.303.373.623.333.282.90H33.682.903.29T43.833.163.503.573.823.533.483.10H43.592.883.23T53.983.313.643.723.963.683.623.24H52.842.872.85T63.082.412.752.823.072.782.732.35T73.532.863.203.273.523.233.182.80Mean3.592.92-CD 5 %S: 0.02T: 0.04S × T: 0.05H: 0.03S × H: 0.04T × H: 0.08Mean SES: 0.01T: 0.01S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03Total number of cuttings per plantT166.4532.3749.4110.533.7158.3378.8965.61H118.2412.4415.34T281.8343.762.7613.643.3275.0998.4283.39H263.8533.648.72T3116.5469.2992.9220.665.02112.92142.50123.54H3108.5560.4784.51T4107.1262.3484.7318.759.13102.65130.53112.64H4141.1177.67109.39T5111.5865.6488.6119.661.92107.52136.20117.81H5120.6166.1793.39T671.9136.3954.1511.637.1264.2885.8271.92T777.8640.7859.3212.840.8470.7693.3878.81Mean90.4750.07-CD 5 %S: 0.49T: 1.00S × T: 1.27H: 0.76S × H: 1.07T × H: 2.01Mean SES: 0.17T: 0.32S × T: 0.46H: 0.27S × H: 0.39T × H: 0.72Yield of cuttings per meter squareT1591.42288.04439.7393.45300.01519.15702.12583.93H1162.33110.71136.52T2728.24388.91558.58121.04385.54668.27875.87742.17H2568.14298.90433.52T31036.86616.42826.64183.27578.451004.621267.761099.09H3965.83538.02751.93T4952.68554.37753.53166.29525.83912.881160.881001.75H41255.58691.10973.34T5993.07584.15788.61174.44551.08956.901212.161048.46H51073.15588.75830.95T6640.00323.86481.93103.24330.38572.10763.82640.12T7692.74362.74527.74113.88363.34629.58830.79701.12Mean805.00445.50-CD 5 %S: 5.12T: 9.58S × T: 13.55H: 8.10S × H: 11.45T × H: 21.42Mean SES: 1.85T: 3.46S × T: 4.89H: 2.92S × H: 4.13T × H: 7.73cm: centimeters, S: seasons, mm: millimeters, H: Harvesting Flushes, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of nutritional and growth regulator treatments on cutting parameters. cm: centimeters, S: seasons, mm: millimeters, H: Harvesting Flushes, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effects of nutritional modules Benzyl adenine stimulates the lateral growth of plant resulting into more number of cuttings per plant (92.92), while the length of cutting was observed maximum under GA3 treated plants. The maximum length of cuttings (10.58 cm) was noted in the mother block undergone the GA3 treatment, whereas the plants supplied with Jeevamrit enhanced the diameter (3.64 mm) of cuttings. Effect of harvesting flushes The cuttings taken from third flush exhibited maximum length (9.75 cm) of cuttings which was at par with H1 (9.64 cm) and H2 (9.70 cm), while the diameter of cuttings was observed maximum under H2 (3.57 mm). The data presented in Table 4 also shows the cuttings from H4 exhibited the maximum number of cuttings per plant (109.39) and per meter square (973.34). Effect of seasons and treatment modules Interaction effects of seasons and treatment modules have significant effect on length, diameter, and number of cuttings per plant and per meter square. The maximum length of cuttings (12.28 cm) was noted under T2 × S-I which was at par with T6 × S-I (12.25 cm) and T7 × S-I (12.01 cm), whereas the diameter of cuttings was observed maximum (3.98 mm) under T5 × S-I. The number of cuttings per plant (116.54) and per square meter (1036.86) were recorded maximum under T3 × S-I. Effect of seasons and harvesting flushes The maximum length of cuttings 11.73 cm was observed under H3 × S-I; while, the diameter of cuttings was observed maximum (4.13 mm) under H2 × S-I. The data on number of cuttings revealed that the maximum number of cuttings per plant (141.11) and per square meter (1255.58) was noted under H4 × S-I. Effect of treatments and harvesting flushes The interaction effect on number of cuttings per plant (142.50) and per square meter (1267.76) was found maximum under H4 × T3, whereas the length (10.94 cm) and diameter (3.96 mm) of cuttings were observed maximum under H3 × T2 and H2 × T5 respectively. Effect of seasons, treatments and harvesting flushes The data in Table 6 shows that the three way interaction have significant effect on length of cuttings, diameter of cuttings, and number of cuttings per plant and per square meter. The maximum length 13.06 cm was recorded under H3 × T2 × S-I, while the number of cuttings per plant 181.77 and per meter square 1617.21 were observed under H4 × T3 × S-I and the diameter of cuttings were recorded maximum (4.52 mm) under T5 × H3 × S-I.Table 6Interaction of nutritional and growth regulator treatments on cutting parameters.Table 6SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5Length of cutting (cm)T18.789.359.989.648.216.726.275.745.325.00T211.8612.4313.0612.7211.299.809.358.828.408.08T38.609.179.809.468.037.537.086.556.135.81T410.7311.3011.9311.5910.168.808.357.827.407.08T510.3310.9011.5311.199.768.578.127.597.176.85T611.8312.4013.0312.6911.269.779.328.798.378.05T711.6012.1712.8012.4611.0310.039.589.058.638.31CD 0.05: 0.68Mean SE: 0.25Diameter of cuttings (mm)T13.773.804.223.682.932.963.113.042.992.97T23.473.503.923.382.632.662.812.742.692.67T33.723.754.173.632.882.913.062.992.942.92T43.923.954.373.833.083.113.263.193.143.12T54.074.104.523.983.233.263.413.343.293.27T63.173.203.623.082.332.362.512.442.392.37T73.623.654.073.532.782.812.962.892.842.82CD 0.05: 0.11Mean SE: 0.04Total number of cuttings per plantT113.4046.9079.73103.6588.597.6020.5236.9454.1442.64T216.5057.7598.18127.63109.0810.7028.8952.0069.2057.70T323.5082.25139.82181.77155.3617.7047.7986.02103.2291.72T421.6075.60128.52167.08142.8015.8042.6676.7993.9982.49T522.5078.75133.88174.04148.7516.7045.0981.1698.3686.86T614.5050.7586.28112.1695.868.7023.4942.2859.4847.98T715.7054.9593.41121.44103.809.9026.7348.1165.3153.81CD 0.05: 2.84Mean SE: 1.03Yield of cuttings per square meterT1119.26417.40709.58922.45788.4267.64182.62328.71481.79379.44T2146.85513.96873.731135.85970.8295.23257.11462.80615.88513.53T3209.08731.771244.001617.211382.22157.46425.13765.23918.31815.96T4192.10672.361143.021485.921270.02140.48379.30682.75835.83733.48T5200.25700.871191.471548.911323.86148.63401.30722.33875.41773.06T6129.05451.69767.87998.23853.1877.43209.07376.33529.41427.06T7139.69488.90831.141080.48923.4988.07237.78428.01581.09478.74CD 0.05: 30.30Mean SE: 10.93cm: centimeters, mm: millimeters, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 6Interaction of nutritional and growth regulator treatments on cutting parameters.Table 6SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5Length of cutting (cm)T18.789.359.989.648.216.726.275.745.325.00T211.8612.4313.0612.7211.299.809.358.828.408.08T38.609.179.809.468.037.537.086.556.135.81T410.7311.3011.9311.5910.168.808.357.827.407.08T510.3310.9011.5311.199.768.578.127.597.176.85T611.8312.4013.0312.6911.269.779.328.798.378.05T711.6012.1712.8012.4611.0310.039.589.058.638.31CD 0.05: 0.68Mean SE: 0.25Diameter of cuttings (mm)T13.773.804.223.682.932.963.113.042.992.97T23.473.503.923.382.632.662.812.742.692.67T33.723.754.173.632.882.913.062.992.942.92T43.923.954.373.833.083.113.263.193.143.12T54.074.104.523.983.233.263.413.343.293.27T63.173.203.623.082.332.362.512.442.392.37T73.623.654.073.532.782.812.962.892.842.82CD 0.05: 0.11Mean SE: 0.04Total number of cuttings per plantT113.4046.9079.73103.6588.597.6020.5236.9454.1442.64T216.5057.7598.18127.63109.0810.7028.8952.0069.2057.70T323.5082.25139.82181.77155.3617.7047.7986.02103.2291.72T421.6075.60128.52167.08142.8015.8042.6676.7993.9982.49T522.5078.75133.88174.04148.7516.7045.0981.1698.3686.86T614.5050.7586.28112.1695.868.7023.4942.2859.4847.98T715.7054.9593.41121.44103.809.9026.7348.1165.3153.81CD 0.05: 2.84Mean SE: 1.03Yield of cuttings per square meterT1119.26417.40709.58922.45788.4267.64182.62328.71481.79379.44T2146.85513.96873.731135.85970.8295.23257.11462.80615.88513.53T3209.08731.771244.001617.211382.22157.46425.13765.23918.31815.96T4192.10672.361143.021485.921270.02140.48379.30682.75835.83733.48T5200.25700.871191.471548.911323.86148.63401.30722.33875.41773.06T6129.05451.69767.87998.23853.1877.43209.07376.33529.41427.06T7139.69488.90831.141080.48923.4988.07237.78428.01581.09478.74CD 0.05: 30.30Mean SE: 10.93cm: centimeters, mm: millimeters, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Interaction of nutritional and growth regulator treatments on cutting parameters. cm: centimeters, mm: millimeters, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of seasons Table 7 shows the significant effect on days taken for rooting, rooting percentage, number of roots per cutting and survival percentage. The minimum days for rooting (14.61 days), rooting percentage (82.43 %), maximum number of roots per cutting (30.11) and maximum survival percentage (80.53 %) was observed during summer season.Table 7Effect of nutritional and growth regulator treatments on cutting parameters.Table 7S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanDays taken for rootingT118.6926.1822.4418.5720.1223.3424.3625.78H114.6614.3414.49T214.6222.1218.3714.5116.0519.2720.321.72H214.1017.9916.04T315.4722.9719.2215.3616.9020.1221.1522.57H313.8424.6919.26T412.4919.9816.2412.3713.9217.1418.1619.58H414.4926.0920.28T511.1618.6514.9011.0412.5915.8116.8318.25H515.9927.4321.70T616.0923.5819.8415.9717.5220.7421.7623.18T713.7621.2517.5013.6415.1918.4119.4320.85Mean14.6122.10--CD 5 %S: 0.20T: 0.38S × T: 0.54H: 0.32S × H: 0.46T × H: 0.85Mean SES: 0.07T: 0.14S × T: 0.19H: 0.12S × H: 0.16T × H: 0.31Rooting percentage (%)T174.6260.8567.7474.1072.6568.6263.9459.39H182.9180.9081.90T276.9263.1570.0476.4074.9570.9266.2461.69H284.3176.6080.45T389.8976.1283.0089.3687.9183.8879.2174.66H383.7569.1076.42T487.5673.7880.6787.0385.5881.5576.8772.32H482.9060.6071.74T591.3977.6284.5090.8689.4185.3880.7176.16H578.3056.1067.19T677.3963.6270.5076.8675.4171.3866.7162.16T779.2265.4572.3478.7077.2573.2268.5463.99Mean82.4368.65-CD 5 %S: 0.25T:0.47S × T:0.67H: 0.40S × H: 0.57T × H: 1.06Mean SES: 0.09T: 0.17S × T: 0.24H: 0.14S × H: 0.20T × H: 0.38Number of roots per cuttingT123.3217.5320.4322.9922.0720.3918.8417.84H131.1228.4329.78T228.8623.0725.9628.5227.6025.9324.3823.37H231.6826.0328.86T331.5225.7328.6331.1930.2728.5927.0426.04H330.9323.4327.18T435.6929.9032.7935.3634.4432.7631.2130.21H429.1322.1325.63T538.3632.5735.4638.0237.1035.4333.8832.87H527.6821.5724.63T625.9220.1323.0325.5924.6722.9921.4420.44T727.1221.3324.2326.7925.8724.1922.6421.64Mean30.1124.32-CD 5 %S: 0.14T: 0.26S × T: 0.37H: 0.22S × H: 0.32T × H: 0.59Mean SES: 0.05T: 0.10S × T: 0.14H: 0.08S × H: 0.11T × H: 0.21Survival percentage (%)T171.6259.0865.3569.1568.2366.2062.9060.25H179.8876.2578.07T281.1968.6474.9178.7277.8075.7772.4769.82H281.4472.8577.15T385.9973.4479.7183.5282.6080.5777.2774.62H381.9868.2575.12T486.2773.7279.9983.8082.8880.8577.5574.90H480.5863.0571.82T587.8775.3281.5985.4084.4882.4579.1576.50H578.7859.5569.17T674.4261.8868.1571.9571.0369.0065.7063.05T776.3963.8470.1173.9273.0070.9767.6765.02Mean80.5367.99-CD 5 %S: 0.43T: 0.80S × T: 1.13H: 0.67S × H: 0.94T × H: 1.78Mean SES: 0.15T: 0.29S × T: 0.41H: 0.24S × H: 0.34T × H: 0.64%: percentage, S: seasons, H: Harvesting Flushes, critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 7Effect of nutritional and growth regulator treatments on cutting parameters.Table 7S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanDays taken for rootingT118.6926.1822.4418.5720.1223.3424.3625.78H114.6614.3414.49T214.6222.1218.3714.5116.0519.2720.321.72H214.1017.9916.04T315.4722.9719.2215.3616.9020.1221.1522.57H313.8424.6919.26T412.4919.9816.2412.3713.9217.1418.1619.58H414.4926.0920.28T511.1618.6514.9011.0412.5915.8116.8318.25H515.9927.4321.70T616.0923.5819.8415.9717.5220.7421.7623.18T713.7621.2517.5013.6415.1918.4119.4320.85Mean14.6122.10--CD 5 %S: 0.20T: 0.38S × T: 0.54H: 0.32S × H: 0.46T × H: 0.85Mean SES: 0.07T: 0.14S × T: 0.19H: 0.12S × H: 0.16T × H: 0.31Rooting percentage (%)T174.6260.8567.7474.1072.6568.6263.9459.39H182.9180.9081.90T276.9263.1570.0476.4074.9570.9266.2461.69H284.3176.6080.45T389.8976.1283.0089.3687.9183.8879.2174.66H383.7569.1076.42T487.5673.7880.6787.0385.5881.5576.8772.32H482.9060.6071.74T591.3977.6284.5090.8689.4185.3880.7176.16H578.3056.1067.19T677.3963.6270.5076.8675.4171.3866.7162.16T779.2265.4572.3478.7077.2573.2268.5463.99Mean82.4368.65-CD 5 %S: 0.25T:0.47S × T:0.67H: 0.40S × H: 0.57T × H: 1.06Mean SES: 0.09T: 0.17S × T: 0.24H: 0.14S × H: 0.20T × H: 0.38Number of roots per cuttingT123.3217.5320.4322.9922.0720.3918.8417.84H131.1228.4329.78T228.8623.0725.9628.5227.6025.9324.3823.37H231.6826.0328.86T331.5225.7328.6331.1930.2728.5927.0426.04H330.9323.4327.18T435.6929.9032.7935.3634.4432.7631.2130.21H429.1322.1325.63T538.3632.5735.4638.0237.1035.4333.8832.87H527.6821.5724.63T625.9220.1323.0325.5924.6722.9921.4420.44T727.1221.3324.2326.7925.8724.1922.6421.64Mean30.1124.32-CD 5 %S: 0.14T: 0.26S × T: 0.37H: 0.22S × H: 0.32T × H: 0.59Mean SES: 0.05T: 0.10S × T: 0.14H: 0.08S × H: 0.11T × H: 0.21Survival percentage (%)T171.6259.0865.3569.1568.2366.2062.9060.25H179.8876.2578.07T281.1968.6474.9178.7277.8075.7772.4769.82H281.4472.8577.15T385.9973.4479.7183.5282.6080.5777.2774.62H381.9868.2575.12T486.2773.7279.9983.8082.8880.8577.5574.90H480.5863.0571.82T587.8775.3281.5985.4084.4882.4579.1576.50H578.7859.5569.17T674.4261.8868.1571.9571.0369.0065.7063.05T776.3963.8470.1173.9273.0070.9767.6765.02Mean80.5367.99-CD 5 %S: 0.43T: 0.80S × T: 1.13H: 0.67S × H: 0.94T × H: 1.78Mean SES: 0.15T: 0.29S × T: 0.41H: 0.24S × H: 0.34T × H: 0.64%: percentage, S: seasons, H: Harvesting Flushes, critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of nutritional and growth regulator treatments on cutting parameters. %: percentage, S: seasons, H: Harvesting Flushes, critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of treatment modules Proper nutrition is required for plant growth and developments resulting into healthy cuttings from the mother block. Data (Table 7) shows that the cuttings derived from mother block treated with Jeevamrit enhanced the quality of cuttings w.r.t. days taken for rooting (14.90 days), rooting percentage (84.50 %), number of roots per cutting (35.46) and survival percentage (81.59 %). Effect of harvesting flushes The data shows that the cuttings taken from first harvesting flush (H1) resulted into maximum rooting percentage (81.90 %), number of roots per cutting (29.78), survival percentage (78.07 %) and minimum days for rooting (14.49 days), representing the continuous harvesting of cuttings from mother block and age of plant affects the quality of cuttings (i.e. rooting and survival percentage). Effect of seasons and treatments Interaction effects of seasons and treatments shows that the maximum rooting percentage (91.39 %), number of roots per cutting (38.36), survival percentage (87.87 %) and minimum days for rooting (11.16 days) was observed under T5 × S-I, whereas the effect on survival percentage was found to be non significant. Effect of seasons and harvesting flushes The minimum number of days taken for rooting (13.84 days) and survival percentage (81.98 %) was observed under interaction H3 × S-I, while the interaction H2 × S-I exhibited the maximum rooting percentage (84.31 %) and number of roots per cutting (31.68). Effect of treatment modules and harvesting flushes The significant effect of treatments and harvesting flushes were observed on days taken for rooting, rooting percentage, number of roots per cutting and survival percentage of cuttings. The maximum rooting percentage (90.86 %) and number of roots per cutting (38.02), survival percentage (85.40 %) and minimum days for rooting (11.04 days) were observed under H1 × T5. Interaction effect of seasons, treatment modules and harvesting flushes The data in Table 8 shows the significant effect of three way interaction between seasons, treatments, and harvesting flushes on days taken for rooting, rooting percentage and number of roots per cutting, but non-significant effect was observed on survival percentage. The maximum rooting percentage (93.27 %) and number of roots per cutting (39.93) were observed under S-I × T5 × H2, whereas the minimum days for rooting (10.38 days) were observed under interaction S-I × T5 × H3.Table 8Interaction of nutritional and growth regulator treatments on cutting parameters.Table 8SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5Days taken for rootingT118.7318.1717.9118.5620.0618.4122.0628.7630.1631.50T214.6714.1113.8514.5016.0014.3518.0024.7026.1027.44T315.5214.9614.7015.3516.8515.2018.8525.5526.9528.29T412.5311.9711.7112.3613.8612.2115.8622.5623.9625.30T511.2010.6410.3811.0312.5310.8814.5321.2322.6323.97T616.1315.5715.3115.9617.4615.8119.4626.1627.5628.90T713.8013.2412.9813.6315.1313.4817.1323.8325.2326.57CD 0.05: 1.20Mean SE: 0.43Rooting percentage (%)T175.1076.5075.9475.0970.4973.0968.7961.2952.7948.29T277.4078.8078.2477.3972.7975.3971.0963.5955.0950.59T390.3791.7791.2190.3685.7688.3684.0676.5668.0663.56T488.0389.4388.8788.0283.4286.0281.7274.2265.7261.22T591.8793.2792.7191.8687.2689.8685.5678.0669.5665.06T677.8779.2778.7177.8673.2675.8671.5664.0655.5651.06T779.7081.1080.5479.6975.0977.6973.3965.8957.3952.89CD 0.05: 1.50Mean SE: 0.54Number of roots per cuttingT124.3324.8924.1422.3420.8921.6419.2416.6415.3414.78T229.8730.4329.6827.8826.4327.1824.7822.1820.8820.32T332.5333.0932.3430.5429.0929.8427.4424.8423.5422.98T436.7037.2636.5134.7133.2634.0131.6129.0127.7127.15T539.3739.9339.1837.3835.9336.6834.2831.6830.3829.82T626.9327.4926.7424.9423.4924.2421.8419.2417.9417.38T728.1328.6927.9426.1424.6925.4423.0420.4419.1418.58CD 0.05: 0.84Mean SE: 0.30Survival percentage (%)T170.9772.5373.0771.6769.8767.3463.9459.3454.1450.64T280.5382.0982.6381.2379.4376.9073.5068.9063.7060.20T385.3386.8987.4386.0384.2381.7078.3073.7068.5065.00T487.2188.7789.3187.9186.1183.5880.1875.5870.3866.88T585.6187.1787.7186.3184.5181.9878.5873.9868.7865.28T673.7775.3375.8774.4772.6770.1466.7462.1456.9453.44T775.7377.2977.8376.4374.6372.1068.7064.1058.9055.40CD 0.05: 2.51Mean SE: 0.91%: percentage, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 8Interaction of nutritional and growth regulator treatments on cutting parameters.Table 8SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5Days taken for rootingT118.7318.1717.9118.5620.0618.4122.0628.7630.1631.50T214.6714.1113.8514.5016.0014.3518.0024.7026.1027.44T315.5214.9614.7015.3516.8515.2018.8525.5526.9528.29T412.5311.9711.7112.3613.8612.2115.8622.5623.9625.30T511.2010.6410.3811.0312.5310.8814.5321.2322.6323.97T616.1315.5715.3115.9617.4615.8119.4626.1627.5628.90T713.8013.2412.9813.6315.1313.4817.1323.8325.2326.57CD 0.05: 1.20Mean SE: 0.43Rooting percentage (%)T175.1076.5075.9475.0970.4973.0968.7961.2952.7948.29T277.4078.8078.2477.3972.7975.3971.0963.5955.0950.59T390.3791.7791.2190.3685.7688.3684.0676.5668.0663.56T488.0389.4388.8788.0283.4286.0281.7274.2265.7261.22T591.8793.2792.7191.8687.2689.8685.5678.0669.5665.06T677.8779.2778.7177.8673.2675.8671.5664.0655.5651.06T779.7081.1080.5479.6975.0977.6973.3965.8957.3952.89CD 0.05: 1.50Mean SE: 0.54Number of roots per cuttingT124.3324.8924.1422.3420.8921.6419.2416.6415.3414.78T229.8730.4329.6827.8826.4327.1824.7822.1820.8820.32T332.5333.0932.3430.5429.0929.8427.4424.8423.5422.98T436.7037.2636.5134.7133.2634.0131.6129.0127.7127.15T539.3739.9339.1837.3835.9336.6834.2831.6830.3829.82T626.9327.4926.7424.9423.4924.2421.8419.2417.9417.38T728.1328.6927.9426.1424.6925.4423.0420.4419.1418.58CD 0.05: 0.84Mean SE: 0.30Survival percentage (%)T170.9772.5373.0771.6769.8767.3463.9459.3454.1450.64T280.5382.0982.6381.2379.4376.9073.5068.9063.7060.20T385.3386.8987.4386.0384.2381.7078.3073.7068.5065.00T487.2188.7789.3187.9186.1183.5880.1875.5870.3866.88T585.6187.1787.7186.3184.5181.9878.5873.9868.7865.28T673.7775.3375.8774.4772.6770.1466.7462.1456.9453.44T775.7377.2977.8376.4374.6372.1068.7064.1058.9055.40CD 0.05: 2.51Mean SE: 0.91%: percentage, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Interaction of nutritional and growth regulator treatments on cutting parameters. %: percentage, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of season on viable microbial count The soil sampling was conducted after each harvesting flush and throughout each season. The microbial count was significantly higher during summer compared to the winter. This difference is likely due to the favorable climatic conditions during the summer, which stimulate the growth and multiplication of soil microbes. The viable microbial diversity i.e. bacteria (16.15 × 10⁵ cfu g−1), fungi (3.33 × 10³ cfu g−1), and actinomycetes (2.68 × 10³ cfu g−1) were observed higher during summer. Conversely, organic carbon (0.97 %) was observed at higher levels during the winter. This is likely because colder temperatures during the winter reduce the microbial population, leading to slower decomposition rates and greater organic carbon accumulation in the soil. Effect of nutritional modules The soil collected from the plots where Jeevamrit was applied were observed to have more viable bacteria (18.27 × 105 cfu g−1), fungi (3.64 × 103 cfu g−1) and actinomycetes (3.12 × 103 cfu g−1) but the organic carbon was recorded more under T7 (1.14 %). Effect of harvesting flushes The data on harvesting flushes shows that the maximum viable bacterial (14.38 × 105 cfu g−1), Fungal (3.56 × 103 cfu g−1), actinomycetes (2.84 × 103 cfu g−1) count and organic carbon (0.97 %) was observed under H3. Effect of seasons and treatment modules The interaction effect of treatment modules and seasons shows that (Table 9) the maximum viable bacterial (21.00 × 105 cfu g−1), fungi (4.46 × 103 cfu g−1) and actinomycetes (3.89 × 103 cfu g−1) count were observed under T5 × S-I, due to the natural farming and suitable climatic conditions during summer for microbial growth.Table 9Effect of nutritional and growth regulator treatments on soil organic carbon and microbial count.Table 9S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanBacterial ( × 105 cfu g−1 Soil)T115.5612.2613.9113.9514.0514.1513.7813.61H116.0412.2714.15T215.6412.2513.9513.9914.0914.1913.8213.65H216.2112.3414.28T315.4312.2313.8313.8813.9814.0813.7013.53H316.3512.4114.38T415.3012.1713.7413.7813.8813.9813.6113.44H416.1112.0314.07T521.0015.5418.2717.9518.2018.3418.3918.49H516.0211.8613.94T615.1811.7213.4513.4913.6013.6913.3213.15T714.909.0811.9912.0412.1312.2311.8611.69Mean16.1512.18-CDS: 0.10T: 0.18S × T: 0.25H: 0.15S × H: NST × H: NSMean SES: 0.03T: 0.06S × T: 0.09H: 0.05S × H: 0.08T × H: 0.14Fungi ( × 103 cfu g−1 Soil)T13.203.113.152.652.973.683.313.14H12.762.602.68T23.333.093.212.713.033.743.373.20H23.092.772.93T33.433.073.252.753.073.783.413.24H33.803.333.56T43.533.023.272.773.093.803.433.26H43.552.953.25T54.462.813.643.643.453.643.683.78H53.462.783.12T62.832.592.712.202.533.242.872.70T72.542.512.532.032.353.062.692.52Mean3.332.89-CDS: 0.02T: 0.04S × T: 0.06H: 0.03S × H: 0.05T × H: 0.09Mean SES: 0.01T: 0.02S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03Actinomycetes ( × 103 cfu g−1 Soil)T12.542.452.502.102.492.932.562.39H12.212.032.12T22.672.442.552.152.552.992.622.45H22.632.302.47T32.772.422.592.192.593.032.662.49H33.052.632.84T42.872.362.612.212.613.052.682.51H42.812.252.53T53.892.363.123.083.103.083.133.23H52.722.082.40T62.171.932.051.642.042.482.111.95T71.891.861.871.471.872.311.941.77Mean2.682.26-CDS: 0.02T: 0.04S × T: 0.05H: 0.03S × H: 0.04T × H: 0.08Mean SES: 0.01T: 0.01S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03O C (%)T10.811.000.910.920.830.870.830.92H10.880.990.93T20.780.870.830.970.850.880.850.97H20.921.030.97T30.800.740.770.960.860.840.900.96H30.911.020.97T40.810.900.860.840.810.840.850.91H40.880.960.92T50.920.940.930.840.790.440.850.90H50.860.840.85T61.011.131.070.920.830.870.830.92T71.081.201.140.970.850.880.850.97Mean0.890.97-CDS: 0.01T: 0.01S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03Mean SES: 0.003T: 0.01S × T: 0.01H: 0.004S × H: 0.01T × H: 0.01cfu g−1: colony forming unit/gram of soil, OC: organic carbon, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 9Effect of nutritional and growth regulator treatments on soil organic carbon and microbial count.Table 9S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanBacterial ( × 105 cfu g−1 Soil)T115.5612.2613.9113.9514.0514.1513.7813.61H116.0412.2714.15T215.6412.2513.9513.9914.0914.1913.8213.65H216.2112.3414.28T315.4312.2313.8313.8813.9814.0813.7013.53H316.3512.4114.38T415.3012.1713.7413.7813.8813.9813.6113.44H416.1112.0314.07T521.0015.5418.2717.9518.2018.3418.3918.49H516.0211.8613.94T615.1811.7213.4513.4913.6013.6913.3213.15T714.909.0811.9912.0412.1312.2311.8611.69Mean16.1512.18-CDS: 0.10T: 0.18S × T: 0.25H: 0.15S × H: NST × H: NSMean SES: 0.03T: 0.06S × T: 0.09H: 0.05S × H: 0.08T × H: 0.14Fungi ( × 103 cfu g−1 Soil)T13.203.113.152.652.973.683.313.14H12.762.602.68T23.333.093.212.713.033.743.373.20H23.092.772.93T33.433.073.252.753.073.783.413.24H33.803.333.56T43.533.023.272.773.093.803.433.26H43.552.953.25T54.462.813.643.643.453.643.683.78H53.462.783.12T62.832.592.712.202.533.242.872.70T72.542.512.532.032.353.062.692.52Mean3.332.89-CDS: 0.02T: 0.04S × T: 0.06H: 0.03S × H: 0.05T × H: 0.09Mean SES: 0.01T: 0.02S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03Actinomycetes ( × 103 cfu g−1 Soil)T12.542.452.502.102.492.932.562.39H12.212.032.12T22.672.442.552.152.552.992.622.45H22.632.302.47T32.772.422.592.192.593.032.662.49H33.052.632.84T42.872.362.612.212.613.052.682.51H42.812.252.53T53.892.363.123.083.103.083.133.23H52.722.082.40T62.171.932.051.642.042.482.111.95T71.891.861.871.471.872.311.941.77Mean2.682.26-CDS: 0.02T: 0.04S × T: 0.05H: 0.03S × H: 0.04T × H: 0.08Mean SES: 0.01T: 0.01S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03O C (%)T10.811.000.910.920.830.870.830.92H10.880.990.93T20.780.870.830.970.850.880.850.97H20.921.030.97T30.800.740.770.960.860.840.900.96H30.911.020.97T40.810.900.860.840.810.840.850.91H40.880.960.92T50.920.940.930.840.790.440.850.90H50.860.840.85T61.011.131.070.920.830.870.830.92T71.081.201.140.970.850.880.850.97Mean0.890.97-CDS: 0.01T: 0.01S × T: 0.02H: 0.01S × H: 0.02T × H: 0.03Mean SES: 0.003T: 0.01S × T: 0.01H: 0.004S × H: 0.01T × H: 0.01cfu g−1: colony forming unit/gram of soil, OC: organic carbon, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of nutritional and growth regulator treatments on soil organic carbon and microbial count. cfu g−1: colony forming unit/gram of soil, OC: organic carbon, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of seasons and harvesting flushes The interaction effect of seasons and harvesting flushes has significant effect on fungi, actinomycetes and organic carbon in soil, but the effect was found non-significant on viable bacterial population. The maximum fungi (3.80 × 103 cfu g−1) and actinomycetes (3.05 × 103 cfu g−1) were observed during summer season from third harvesting flush of cuttings, whereas maximum organic carbon (1.03 %) was recorded under H2 × S-II. Effect of treatment modules and harvesting flushes Data pertaining in Table 9 shows that the maximum bacterial (18.49 × 105 cfu g−1) and actinomycetes (3.23 × 103 cfu g−1) were observed under T5 × H5, whereas maximum population of fungi (3.80 × 103 cfu g−1) was noted under T4 × H3. The results on organic carbon were observed similar under T2 × H1, T2 × H5, T7 × H1 and T7 × H5 (i.e. 0.97 %). Effect of treatment modules, seasons and harvesting flushes Three way interactions (Table 10) shows the significant effect of treatment modules, seasons and harvesting flushes on microbial diversity and organic carbon in soil. The maximum viable bacterial (21.89 × 105 cfu g−1), fungi (5.42 × 103 cfu g−1) and actinomycetes (4.73 × 103 cfu g−1) count were observed maximum under S-I × T5 × H5, whereas maximum organic carbon (1.25 %) was recorded under S-I × T7 × H2.Table 10Interaction of nutritional and nutritional modules on soil and plant analysis.Table 10SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5Bacteria ( × 105 cfu g−1)T115.6015.7015.8015.4315.2612.3012.4012.5012.1411.96T215.6815.7815.8815.5115.3412.2912.3912.4912.1211.95T315.4815.5815.6815.3015.1412.2712.3712.4712.1011.93T415.3415.4515.5415.1715.0012.2112.3112.4112.0411.87T520.0020.6021.0021.5221.8915.9015.8015.6815.2515.08T615.2215.3215.4215.0514.8911.7611.8711.9611.5911.42T714.9415.0415.1414.7714.609.139.229.328.958.78CD 0.05: 0.56Mean SE: 0.20Fungi ( × 103 cfu g−1)T12.703.023.733.363.192.602.933.633.263.10T22.833.153.863.493.322.592.913.623.253.09T32.923.253.953.583.422.572.893.613.233.06T43.033.354.063.683.512.522.843.543.173.00T53.503.824.535.055.423.783.072.752.322.15T62.322.643.362.982.822.082.413.112.752.57T72.042.363.072.702.532.012.333.052.672.50CD 0.05: 0.13Mean SE: 0.05Actinomycetes ( × 103 cfu g−1)T12.142.542.982.612.442.052.442.882.522.35T22.272.673.112.742.572.032.442.882.502.33T32.372.773.212.842.672.012.422.852.482.31T42.472.863.312.942.771.962.352.792.432.25T53.003.503.844.364.733.162.702.321.891.72T61.762.162.602.232.061.521.922.361.991.83T71.481.892.321.951.781.451.862.291.931.76CD 0.05: 0.11Mean SE: 0.04O C (%)T10.800.820.830.790.801.041.111.090.880.89T20.780.800.820.760.750.870.890.910.850.84T30.820.830.790.790.780.910.920.880.880.09T40.790.800.850.810.800.880.890.940.900.89T50.900.970.950.910.890.940.960.970.910.90T60.991.061.041.000.981.111.181.161.121.10T71.061.131.111.071.051.181.251.221.191.17CD 0.05: 0.04Mean SE: 0.02cfu g−1: colony forming unit/gram of soil, OC: organic carbon, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, OC: organic carbon, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 10Interaction of nutritional and nutritional modules on soil and plant analysis.Table 10SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5Bacteria ( × 105 cfu g−1)T115.6015.7015.8015.4315.2612.3012.4012.5012.1411.96T215.6815.7815.8815.5115.3412.2912.3912.4912.1211.95T315.4815.5815.6815.3015.1412.2712.3712.4712.1011.93T415.3415.4515.5415.1715.0012.2112.3112.4112.0411.87T520.0020.6021.0021.5221.8915.9015.8015.6815.2515.08T615.2215.3215.4215.0514.8911.7611.8711.9611.5911.42T714.9415.0415.1414.7714.609.139.229.328.958.78CD 0.05: 0.56Mean SE: 0.20Fungi ( × 103 cfu g−1)T12.703.023.733.363.192.602.933.633.263.10T22.833.153.863.493.322.592.913.623.253.09T32.923.253.953.583.422.572.893.613.233.06T43.033.354.063.683.512.522.843.543.173.00T53.503.824.535.055.423.783.072.752.322.15T62.322.643.362.982.822.082.413.112.752.57T72.042.363.072.702.532.012.333.052.672.50CD 0.05: 0.13Mean SE: 0.05Actinomycetes ( × 103 cfu g−1)T12.142.542.982.612.442.052.442.882.522.35T22.272.673.112.742.572.032.442.882.502.33T32.372.773.212.842.672.012.422.852.482.31T42.472.863.312.942.771.962.352.792.432.25T53.003.503.844.364.733.162.702.321.891.72T61.762.162.602.232.061.521.922.361.991.83T71.481.892.321.951.781.451.862.291.931.76CD 0.05: 0.11Mean SE: 0.04O C (%)T10.800.820.830.790.801.041.111.090.880.89T20.780.800.820.760.750.870.890.910.850.84T30.820.830.790.790.780.910.920.880.880.09T40.790.800.850.810.800.880.890.940.900.89T50.900.970.950.910.890.940.960.970.910.90T60.991.061.041.000.981.111.181.161.121.10T71.061.131.111.071.051.181.251.221.191.17CD 0.05: 0.04Mean SE: 0.02cfu g−1: colony forming unit/gram of soil, OC: organic carbon, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, OC: organic carbon, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Interaction of nutritional and nutritional modules on soil and plant analysis. cfu g−1: colony forming unit/gram of soil, OC: organic carbon, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, OC: organic carbon, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of seasons The data presented in Table 11 shows the effect of seasons, treatment modules, harvesting flushes and their interaction effect on plant nutrient uptake. The higher N (16.81 kg ha −1), P (7.25 kg ha −1) and K (13.86 kg ha −1) uptake by plant was noted during summer season, as higher the temperature more will be the metabolism in plant resulting into higher nutrient uptake by plant.Table 11Effect of treatment modules, seasons and harvesting flushes on nutrient uptake by plant.Table 11S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanN uptake (kg ha −1)T116.3312.7914.5612.7912.8913.0112.9316.70H115.1511.6113.38T216.4312.8914.6614.6014.7014.8214.7417.27H216.7813.2415.01T316.5513.0114.7815.1015.2015.3215.2418.07H317.3313.7815.56T416.4712.9314.7015.1815.2815.4015.3218.28H417.4213.8915.65T519.5015.9617.7315.1315.2315.3515.2718.34H517.3913.8515.62T616.3312.7914.5612.7912.8913.0112.9316.70T716.0912.5514.3214.6014.7014.8214.7417.27Mean16.8113.27--CDS: 0.11T: 0.21S × T: NSH: 0.17S × H: NST × H: NSMean SES: 0.04T: 0.07S × T: 0.10H: 0.06S × H: 0.09T × H: 0.17P uptake (kg ha −1)T16.224.655.434.304.845.615.187.60H16.014.445.23T26.765.195.975.015.556.315.897.92H26.665.095.87T37.525.956.735.886.427.186.7610.13H37.726.156.94T47.105.536.316.076.607.376.9510.79H47.976.407.19T510.268.699.485.926.467.226.7910.94H57.876.307.08T66.675.105.894.304.845.615.187.60T76.204.635.415.015.556.315.897.92Mean7.255.68-CDS: 0.05T: 0.09S × T: NSH: 0.08S × H: NST × H: 0.21Mean SES: 0.02T: 0.03S × T: 0.05H: 0.03S × H: 0.04T × H: 0.07K uptake (kg ha −1)T113.5911.5112.5512.3912.6312.6912.3514.18H113.6011.5212.56T213.8311.7512.7913.1013.3413.4013.0614.29H214.2312.1513.19T313.8811.8012.8412.8013.0413.0912.7514.96H314.0611.9813.02T413.5411.4612.5012.4812.7212.7812.4415.52H413.8711.7912.83T516.0713.9915.0311.9612.2012.2611.9216.17H513.5211.4412.48T613.2611.1812.2212.3912.6312.6912.3514.18T712.8410.7611.8013.1013.3413.4013.0614.29Mean13.8611.78-CDS: 0.09T: 0.17S × T: NSH: 0.15S × H: NST × H: 0.39Mean SES: 0.03T: 0.06S × T: 0.09H: 0.05S × H: 0.07T × H: 0.14kg ha−1: kilogram per hectare, N: nitrogen, P: phosphorus, K: potassium, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, NS: non-significant, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 11Effect of treatment modules, seasons and harvesting flushes on nutrient uptake by plant.Table 11S-IS-IIMeanH1H2H3H4H5HS-IS-IIMeanN uptake (kg ha −1)T116.3312.7914.5612.7912.8913.0112.9316.70H115.1511.6113.38T216.4312.8914.6614.6014.7014.8214.7417.27H216.7813.2415.01T316.5513.0114.7815.1015.2015.3215.2418.07H317.3313.7815.56T416.4712.9314.7015.1815.2815.4015.3218.28H417.4213.8915.65T519.5015.9617.7315.1315.2315.3515.2718.34H517.3913.8515.62T616.3312.7914.5612.7912.8913.0112.9316.70T716.0912.5514.3214.6014.7014.8214.7417.27Mean16.8113.27--CDS: 0.11T: 0.21S × T: NSH: 0.17S × H: NST × H: NSMean SES: 0.04T: 0.07S × T: 0.10H: 0.06S × H: 0.09T × H: 0.17P uptake (kg ha −1)T16.224.655.434.304.845.615.187.60H16.014.445.23T26.765.195.975.015.556.315.897.92H26.665.095.87T37.525.956.735.886.427.186.7610.13H37.726.156.94T47.105.536.316.076.607.376.9510.79H47.976.407.19T510.268.699.485.926.467.226.7910.94H57.876.307.08T66.675.105.894.304.845.615.187.60T76.204.635.415.015.556.315.897.92Mean7.255.68-CDS: 0.05T: 0.09S × T: NSH: 0.08S × H: NST × H: 0.21Mean SES: 0.02T: 0.03S × T: 0.05H: 0.03S × H: 0.04T × H: 0.07K uptake (kg ha −1)T113.5911.5112.5512.3912.6312.6912.3514.18H113.6011.5212.56T213.8311.7512.7913.1013.3413.4013.0614.29H214.2312.1513.19T313.8811.8012.8412.8013.0413.0912.7514.96H314.0611.9813.02T413.5411.4612.5012.4812.7212.7812.4415.52H413.8711.7912.83T516.0713.9915.0311.9612.2012.2611.9216.17H513.5211.4412.48T613.2611.1812.2212.3912.6312.6912.3514.18T712.8410.7611.8013.1013.3413.4013.0614.29Mean13.8611.78-CDS: 0.09T: 0.17S × T: NSH: 0.15S × H: NST × H: 0.39Mean SES: 0.03T: 0.06S × T: 0.09H: 0.05S × H: 0.07T × H: 0.14kg ha−1: kilogram per hectare, N: nitrogen, P: phosphorus, K: potassium, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, NS: non-significant, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of treatment modules, seasons and harvesting flushes on nutrient uptake by plant. kg ha−1: kilogram per hectare, N: nitrogen, P: phosphorus, K: potassium, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, NS: non-significant, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Effect of treatment modules Treatment modules have significant effect on plant nutrient uptake, the higher uptake of N (17.73 kg ha −1), P (9.48 kg ha −1) and K (15.03 kg ha −1) was recorded under T5; as natural farming enhance microbial diversity (Table 9, Table 10) resulting into more availability of nutrients to plants. Effect of harvesting flushes Results shows that the maximum uptake of N (15.65 kg ha −1) and P (7.19 kg ha −1) was observed from fourth harvesting flush of cuttings, whereas maximum K uptake (13.19 kg ha −1) was recorded under H2. Effect of treatment modules and harvesting flushes Interaction effect of treatments and harvesting flushes shows the significant effect on uptake of P and K. The maximum uptake of P (10.94 kg ha −1) and K (16.17 kg ha −1) by marigold plants were observed under T5 × H5. Interaction effect of treatments × harvesting flushes on N uptake of plant was found to be non significant. Interaction effect of seasons, treatment modules and harvesting flushes It was observed from the data presented in Table 12 that the effect of three way interaction on nutrient uptake was found to be non-significant.Table 12Interaction of treatment modules, seasons and harvesting flushes on nutrient uptake by plant.Table 12SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5N uptake (kg ha −1)T114.5616.3716.8716.9516.9011.0212.8313.3313.4113.36T214.6616.4716.9717.0517.0011.1212.9313.4313.5113.46T314.7816.5917.0917.1717.1211.2413.0513.5513.6313.58T414.7016.5117.0117.0917.0411.1612.9713.4713.5513.50T518.4619.0419.8420.0520.1114.9315.5016.3016.5116.57T614.5616.3716.8716.9516.9011.0212.8313.3313.4113.36T714.3216.1316.6316.7116.6610.7812.5913.0913.1713.12T114.5616.3716.8716.9516.9011.0212.8313.3313.4113.36CD 0.05: NSMean SE: 0.23P uptake (kg ha −1)T15.095.796.666.856.703.524.225.095.285.13T25.636.337.207.397.244.064.765.635.825.67T36.397.097.968.158.004.825.526.396.586.43T45.976.677.547.737.584.405.105.976.166.01T58.398.7010.9211.5711.726.827.139.3510.0010.15T65.546.247.117.307.153.974.675.545.735.58T75.075.776.646.836.683.504.205.075.265.11CD 0.05: NSMean SE: 0.10K uptake (kg ha −1)T113.4314.1413.8413.5213.0011.3512.0711.7511.4410.92T213.6714.3814.0713.7613.2411.5912.3012.0011.6811.16T313.7314.4414.1313.8213.3011.6512.3612.0511.7411.22T413.3914.1013.7913.4812.9611.3012.0211.7111.4010.88T515.2215.3316.0016.5617.2113.1413.2513.9214.4815.13T613.1113.8213.5113.2012.6811.0311.7411.4311.1210.60T712.6913.4013.0912.7812.2610.6111.3211.0110.7010.17CD 0.05: NSMean SE: 0.20kg ha−1: kilogram per hectare, N: nitrogen, P: phosphorus, K: potassium, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, NS: non-significant, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Table 12Interaction of treatment modules, seasons and harvesting flushes on nutrient uptake by plant.Table 12SeasonsS-IS-IIH1H2H3H4H5H1H2H3H4H5N uptake (kg ha −1)T114.5616.3716.8716.9516.9011.0212.8313.3313.4113.36T214.6616.4716.9717.0517.0011.1212.9313.4313.5113.46T314.7816.5917.0917.1717.1211.2413.0513.5513.6313.58T414.7016.5117.0117.0917.0411.1612.9713.4713.5513.50T518.4619.0419.8420.0520.1114.9315.5016.3016.5116.57T614.5616.3716.8716.9516.9011.0212.8313.3313.4113.36T714.3216.1316.6316.7116.6610.7812.5913.0913.1713.12T114.5616.3716.8716.9516.9011.0212.8313.3313.4113.36CD 0.05: NSMean SE: 0.23P uptake (kg ha −1)T15.095.796.666.856.703.524.225.095.285.13T25.636.337.207.397.244.064.765.635.825.67T36.397.097.968.158.004.825.526.396.586.43T45.976.677.547.737.584.405.105.976.166.01T58.398.7010.9211.5711.726.827.139.3510.0010.15T65.546.247.117.307.153.974.675.545.735.58T75.075.776.646.836.683.504.205.075.265.11CD 0.05: NSMean SE: 0.10K uptake (kg ha −1)T113.4314.1413.8413.5213.0011.3512.0711.7511.4410.92T213.6714.3814.0713.7613.2411.5912.3012.0011.6811.16T313.7314.4414.1313.8213.3011.6512.3612.0511.7411.22T413.3914.1013.7913.4812.9611.3012.0211.7111.4010.88T515.2215.3316.0016.5617.2113.1413.2513.9214.4815.13T613.1113.8213.5113.2012.6811.0311.7411.4311.1210.60T712.6913.4013.0912.7812.2610.6111.3211.0110.7010.17CD 0.05: NSMean SE: 0.20kg ha−1: kilogram per hectare, N: nitrogen, P: phosphorus, K: potassium, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, NS: non-significant, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Interaction of treatment modules, seasons and harvesting flushes on nutrient uptake by plant. kg ha−1: kilogram per hectare, N: nitrogen, P: phosphorus, K: potassium, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, NS: non-significant, T1: RDF (N-P-K @ 30-20-20 g/m2, only once at the time of field preparation), T2: T1 + GA3 @ 100 ppm, T3: T1 + BA @ 100 ppm, T4: T1 + GA3 @ 100 ppm + BA @ 100 ppm, T5: Jeevamrit @ 2 L m−2 (drench at 15 days interval), T6: T1 + Urea @ 1000 ppm (drench at 15 days interval) T7: T1 + Urea @ 1500 ppm (drench at 15 days interval). Pearson correlation analysis of yield and quality of cuttings of marigold with soil and plant analysis The number of cuttings per plant, rooting percentage and number of roots per cutting exhibited a positive correlation with the soil microbial count and nitrogen, phosphorus, and potassium by the plant; whereas, the correlation is dependent upon the presence of a certain level of microbial activity in the soil, as an increase in microbial population can lead to a decrease in organic carbon. In other words, as microbial populations grow, organic carbon levels tend to decline, suggesting a delicate balance between these factors in the soil ecosystem. The data revealed a strong correlation between viable bacterial population and potassium uptake by plants (Fig. 3), with a coefficient of determination (r) 0.989. In contrast, the population of fungi exhibited a significant correlation with potassium uptake (r = 0.833), indicating that these microorganisms play a critical role in plant nutrition. Notably, actinomycetes count showed an extremely high correlation with fungi (r = 0.995), suggesting a close relationship between these microbial groups. The yield of cuttings per plant (r = 0.694) and rooting percentage (r = 0.771) showed positive correlations with phosphorus uptake by plants, highlighting the importance of phosphorus in plant growth and development.Fig. 3Correlation with yield and quality of cuttings with soil and plant properties.Fig. 3 Correlation with yield and quality of cuttings with soil and plant properties. On the other hand, organic carbon in soil exhibited negative correlations with different parameters, i.e. bacteria (r = −0.290), fungi (r = −0.756), actinomycetes (r = −0.690), nitrogen (N) (r = −0.109), phosphorus (P) (r = −0.232), potassium (K) (r = −0.326), rooting percentage (r = −0.398), survival percentage (r = −0.580) and number of cuttings per plant (r = −0.558). The results propose that the microbial population and N, P, and K uptake by plants are inversely proportional to organic carbon; as the microbial activity helps to break down organic matter, thereby reducing the organic carbon content in the soil. Experiment-II: comparative effect of Jeevamrit and chemical fertilizers on flowering parameters Effect of seasons The seasons have significant effect on flowering parameters (Table 13) of marigold cultivar ‘Siracole’; as summer season enhanced the flower characteristics i.e. days taken for flower bud formation (42.04 days), number of marketable flowers per plant (147.03) and yield of marketable flowers per plant (938.39 g).Table 13Effect of treatments, seasons and harvesting flushes on flowering parameters.Table 13S-IS-IIMeanT1T2InteractionsCDMean SEDays taken for flower bud formationH142.0253.5747.7947.5248.07Seasons0.350.12H242.0854.5248.3048.1148.49Nutritional modulesNS0.12H342.0355.4748.7548.7248.78Season × Nutritional modules0.500.17Mean42.0454.52-Harvesting flushes0.430.15T141.6654.5848.12Season × Harvesting flushes0.610.21T242.4354.4648.45Nutritional modules × Harvesting flushesNS0.21Numbers of marketable flowers per plantH1146.9886.45116.72117.23116.20Seasons0.800.27H2147.2793.83120.55120.93120.17Nutritional modules0.800.27H3146.8392.50119.67120.13119.20Season × Nutritional modulesN/A0.39Mean147.0390.93-Harvesting flushes0.980.33T1147.5991.28119.43Season × Harvesting flushes1.380.47T2146.4790.58118.52Nutritional modules × Harvesting flushesNS0.47Yield of marketable flowers per plant (g)H1942.58746.79844.69861.18828.20Seasons0.760.26H2942.81740.74841.78857.70825.85Nutritional modules0.760.26H3929.79723.69826.74842.67810.81Season × Nutritional modules1.070.36Mean938.39737.08-Harvesting flushes0.930.32T1955.29752.41853.85Season × Harvesting flushes1.310.45T2921.50721.74821.62Nutritional modules × Harvesting flushesNS0.45g: gram, S: seasons, H: Harvesting Flushes, T1: Jeevamrit @ 2 L m−1, T2: RDF – N:P:K @ 30:20:20 g m−1 CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, NS: non-significant. Table 13Effect of treatments, seasons and harvesting flushes on flowering parameters.Table 13S-IS-IIMeanT1T2InteractionsCDMean SEDays taken for flower bud formationH142.0253.5747.7947.5248.07Seasons0.350.12H242.0854.5248.3048.1148.49Nutritional modulesNS0.12H342.0355.4748.7548.7248.78Season × Nutritional modules0.500.17Mean42.0454.52-Harvesting flushes0.430.15T141.6654.5848.12Season × Harvesting flushes0.610.21T242.4354.4648.45Nutritional modules × Harvesting flushesNS0.21Numbers of marketable flowers per plantH1146.9886.45116.72117.23116.20Seasons0.800.27H2147.2793.83120.55120.93120.17Nutritional modules0.800.27H3146.8392.50119.67120.13119.20Season × Nutritional modulesN/A0.39Mean147.0390.93-Harvesting flushes0.980.33T1147.5991.28119.43Season × Harvesting flushes1.380.47T2146.4790.58118.52Nutritional modules × Harvesting flushesNS0.47Yield of marketable flowers per plant (g)H1942.58746.79844.69861.18828.20Seasons0.760.26H2942.81740.74841.78857.70825.85Nutritional modules0.760.26H3929.79723.69826.74842.67810.81Season × Nutritional modules1.070.36Mean938.39737.08-Harvesting flushes0.930.32T1955.29752.41853.85Season × Harvesting flushes1.310.45T2921.50721.74821.62Nutritional modules × Harvesting flushesNS0.45g: gram, S: seasons, H: Harvesting Flushes, T1: Jeevamrit @ 2 L m−1, T2: RDF – N:P:K @ 30:20:20 g m−1 CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, NS: non-significant. Effect of treatments, seasons and harvesting flushes on flowering parameters. g: gram, S: seasons, H: Harvesting Flushes, T1: Jeevamrit @ 2 L m−1, T2: RDF – N:P:K @ 30:20:20 g m−1 CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, NS: non-significant. Effect of nutritional modules Nutritional modules have significant effect on numbers of marketable flowers and marketable flower yield per plant, but non significant was observed in days taken for flower bud formation. The maximum number of marketable flowers (119.43) and marketable flower yield per plant (853.85 g) was recorded under natural farming system i.e. in T1. Effect of harvesting flushes The maximum number of marketable flowers (120.55) was recorded from the plants raised from the cuttings of second harvesting flush and marketable flower yield per plant (844.69 g) was recorded from the plants raised from the cuttings of first flush, whereas minimum number of days taken for flower bud formation (47.79 days) was recorded under H1. Effect of seasons and nutritional modules The interaction T1 × S-I resulted into more yield of marketable flowers per plant (955.29 g) and lesser days taken for flower bud formation (41.66 days), while the effect was found to be non-significant on number of marketable flowers per plant. Effect of seasons and harvesting flushes The interaction shows the significant effect on flowering characters, the maximum number of marketable flowers (147.27) and yield of marketable flowers per plant (942.81 g) were recorded from the plants raised from second harvesting flush during summer season, whereas minimum days taken for flower bud formation (42.02 days) was observed under H1 × S-I. Harvesting flushes from mother plants reduced the flower yield. This is because the continuous harvesting of cuttings impacts plant age and vigor, subsequently affecting flowering characteristics. Effect of nutritional modules and harvesting flushes The interaction effect of nutritional modules and harvesting flushes on number of days taken for flower bud formation, number of marketable flowers and yield of marketable flowers per plant were found to be non significant. Interaction effect of seasons, nutritional modules and harvesting flushes The three way interaction effect of seasons, nutritional modules and harvesting flushes (Table 14) on number of days taken for flower bud formation, number of marketable flowers and yield of marketable flowers per plant was not significant.Table 14Interaction of treatments, seasons and harvesting flushes on flowering parameters.Table 14SeasonsS-IS-IIT1T2T1T2Days taken for flower bud formationH141.4342.6053.6153.53H241.6342.5354.5854.45H341.9042.1755.5355.40CD 0.05NSMean SE0.29Numbers of marketable flowers per plantH1147.70146.2786.7786.13H2147.77146.7794.1093.57H3147.30146.3792.9792.03CD 0.05NSMean SE0.67Yield of marketable flowers per plant (g)H1959.75925.40762.60730.99H2959.30926.32756.10725.39H3946.80912.78738.54708.85CD 0.05NSMean SE0.63g: gram, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, NS: non-significant. Table 14Interaction of treatments, seasons and harvesting flushes on flowering parameters.Table 14SeasonsS-IS-IIT1T2T1T2Days taken for flower bud formationH141.4342.6053.6153.53H241.6342.5354.5854.45H341.9042.1755.5355.40CD 0.05NSMean SE0.29Numbers of marketable flowers per plantH1147.70146.2786.7786.13H2147.77146.7794.1093.57H3147.30146.3792.9792.03CD 0.05NSMean SE0.67Yield of marketable flowers per plant (g)H1959.75925.40762.60730.99H2959.30926.32756.10725.39H3946.80912.78738.54708.85CD 0.05NSMean SE0.63g: gram, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, NS: non-significant. Interaction of treatments, seasons and harvesting flushes on flowering parameters. g: gram, CD: critical difference, SE: standard error, S-I: summer season, S-II: winter season, H1: first harvesting flush, H2: second harvesting flush, H3: third harvesting flush, H4: fourth harvesting flush, H5: fifth harvesting flush, NS: non-significant. Discussion Experiment-I The foliar application of gibberellic acid (GA3) in conjunction with a nitrogen-phosphorus-potassium (N-P-K) ratio of 30:20:20 g/m2 significantly increased cutting length (Table 5). Plants treated with GA3 exhibited enhanced shoot length, likely due to the exogenous application of GA3 facilitating improved endogenous accumulation, which in turn promotes overall plant growth [28]. The GA3 is believed to play a role of a hormone that is significant for elongation of cells; hence, a better shoot length under GA3 treated mother block of marigold in the present study (Table 5, Table 6) could possibly be as a result of higher cell and stem elongation [11,31]. The application of GA3 may also increase the plant growth because of improved carbohydrate metabolism [31]. A foliar application of GA3 resulting into more biomass accumulation in and prevent heat stress in plant. The present study got support from the findings of Prodhan et al. [32] on cauliflower they found that Gibberellins are weakly acidic growth hormones having a gibbane ring structure which causes cell elongation of intact plants in the general and increased internodal length of genetically dwarfed plants. Our findings align with those of Chen et al. [33], who reported that the application of gibberellic acid (GA3) enhances biomass in Vigna radiata. Additionally, the exogenous application of GA3 in Arabidopsis has been shown to mitigate the detrimental effects of salt, heat, and oxidative stress [34]. According to Khan et al. [35], exogenous GA3 was more effective in reducing temperature stress in date palms by increasing plant height and fresh biomass. Still in Table 4 the present study was carried out to assess the efficacy of Jeevamrit, a traditional bio-fertilizer, in comparison to chemical fertilizers and plant growth regulators for maintaining a healthy mother block of marigold and production of quality cuttings. Jeevamrit was applied at 2 L m−2 to the mother block, and the performance was evaluated in both summer and winter seasons. Our findings suggested that the application of Jeevamrit improved the diameter of un-rooted cuttings because Jeevamrit application enhanced soil organic carbon, improved microbial load (Table 9, Table 10), and nutrient uptake by plant (Table 11) resulting into better growth and development of plants. Organic amendments enhance overall plant growth through either promotion of root growth, or through stimulation of microbial activities in the soil and improvement of the water holding capacity of the soil, thus improving plant stress, disease tolerance and reduce abiotic stresses [36]. Our findings are consistent with the findings of [37,38]. Present findings also show that the application of Benzyladenine in combination with RDF increased the number of cuttings per plant and per square meter (Table 5, Table 6) due to the fact that it plays a significant role in suppressing apical dominance and induce the growth of lateral shoots. Jabbar and Saleh [39] reported an increase in vegetative traits of strawberry plants following foliar application of benzyladenine (BA), a cytokinin. This enhancement is attributed to the pivotal role of cytokinins in the regulation of apical dominance, which typically suppresses the growth of lateral shoots. By applying cytokinin, the effects of apical dominance are mitigated, as it inhibits the growth of dominant shoots. Consequently, this suppression promotes the lateral growth of the plant, leading to improved vegetative characteristics. Moreover, the use of cytokinins spray minimize the inhibitory effect of the auxins naturally present in lateral buds and this would promote the growth of lateral buds and increase vegetative growth [40,41]. Continuous harvesting of cuttings (i.e. from H1 to H5) in combination with nutritional and growth regulator modules increased the average lateral shoot length. Similar result of pinching the plants resulting into greater number of lateral shoots was noted by Dunn et al. [42] and Warner, [43]. In the context of natural farming practices, the application of Jeevamrit, a traditional microbial inoculant, has proven effective in maintaining a healthy mother block. By enhancing soil health and stimulating microbial activity, Jeevamrit creates a nutrient-rich environment that supports the vitality of the mother plants. This results in stronger, healthier cuttings with improved rooting potential and resilience, ultimately contributing to more successful propagation and a sustainable farming system. The use of Jeevamrit not only enhances the immediate quality of the cuttings but also fosters the long-term health and productivity of the mother block. More specifically, it reduces the time required for rooting, increases the rooting percentage, and enhances the number of roots developed (as illustrated in Table 7, Table 8). Moreover, the survival rate of the cuttings in the field was much better. The results presented in Table 9, Table 10 showed that the microbial diversity in the soil had risen, which, in turn, was reflected in the ability of the plants to uptake the nutrients (Table 11). Higher nutrient uptake and accumulation in the vegetative parts is due to the enhanced cellular metabolism, translocation of nutrients in the root zone resulting into higher vegetative growth [44]. Organic fertilizers increase nutrient solubility and accessibility to the plant roots and the rest of the plant system, hence better nutrient status in the root zone and overall plant system. Higher N, P and K concentrations in plants and improved vigor suggest that organic ammendments raised the uptake of N, P and K [44,45]. Microorganisms can enhance plant growth and yield by increasing the nutrient uptake [46]. Consistently, higher doses of organic fertilizers increased phosphate and potassium uptake. Present study got support from the findings of He et al. [47] and Mishra et al. [48]. Experiment-II Data presented in Table 13, Table 14 shows the Jeevamrit application under natural farming exhibited higher number of marketable flowers and yield of marketable flowers per plant. Summer planting improved the yield of plant, this could be as a result of enhanced vigor in plant which is likely to be contributed by enhanced photosynthesis and carbon assimilation in summer planted crops due to favorable climate [49]. More temperature during summer is one of the major exogenous factors influence the growth and development of plants [50]. Temperature affects plant growth through both direct and indirect mechanisms. These influences can significantly alter physiological processes, developmental stages, and overall plant health. The direct impact has some effect on the leaf and air temperature while indirect one has an effect on the absorption and transportation of water and fertilizer from soil [51,52]. Therefore, the optimal temperature is critical for rapid growth of plants in addition to the deposition of organic matter. The present study pointed out that the Jeevamrit brought a considerable improvement in yield of marigold in both growing seasons (Table 13). This study is in line with a prior research stating that bio-fertilizers have a part to play in the carbon equation and metabolisms of nitrogen and therefore, increase the content of amino acids [53]. The enhanced N, P and K uptake observed in the study, evidenced by the reduction of soil N, P, and K levels post-experiment (Table 15), is likely attributed to the stimulation of phytohormone synthesis by organic amendments, which promoted root growth and increased nutrient absorption. The reduced nitrogen uptake during winter periods is likely due to the inhibitory effects of low temperature on plant metabolism. At temperatures below optimal levels, plant growth and metabolism are significantly slowed, resulting in decreased nitrogen uptake and reduced plant growth and yield. This temperature-mediated reduction in nitrogen uptake is consistent with previous studies of Kaushal et al. [45] that have demonstrated the negative impact of low temperature on plant nutrient uptake and overall growth. This phytohormonal boost positively influences photosynthetic activity, consequently enhancing nutrient uptake (Table 10).Table 15Soil characteristics after termination of Experiment-II.Table 15ParticularpHECOC (%)N (kg/ha)P (kg/ha)K (kg/ha)Soil samples from under natural farming plotsSeason-I6.310.420.91254.4748.55388.54Season-II6.420.471.02279.8256.57400.56Soil samples from the plots treated with RDFSeason-I6.600.860.82288.8651.85398.58Season-II6.550.820.96298.7560.45407.19Season-I: summer, Season-II: winter, EC: electrical conductivity, OC: organic carbon, RDF: recommend dose of fertilizers, N: available nitrogen content in soil, P: available phosphorus content in soil, K: available potassium content in soil; the data was taken after completion of flowering. Table 15Soil characteristics after termination of Experiment-II.Table 15ParticularpHECOC (%)N (kg/ha)P (kg/ha)K (kg/ha)Soil samples from under natural farming plotsSeason-I6.310.420.91254.4748.55388.54Season-II6.420.471.02279.8256.57400.56Soil samples from the plots treated with RDFSeason-I6.600.860.82288.8651.85398.58Season-II6.550.820.96298.7560.45407.19Season-I: summer, Season-II: winter, EC: electrical conductivity, OC: organic carbon, RDF: recommend dose of fertilizers, N: available nitrogen content in soil, P: available phosphorus content in soil, K: available potassium content in soil; the data was taken after completion of flowering. Soil characteristics after termination of Experiment-II. Season-I: summer, Season-II: winter, EC: electrical conductivity, OC: organic carbon, RDF: recommend dose of fertilizers, N: available nitrogen content in soil, P: available phosphorus content in soil, K: available potassium content in soil; the data was taken after completion of flowering. Thus, the application of Jeevamrit may have the potential to enhance the plant yield through enhancing the photosynthesis and the nutrient assimilation. In the current study, natural farming system stimulate the hormones including ABA, GA and amylase, as they lead to intensified organic manure in relation to the chemical fertilizers. These results align with the findings of previous research [43,54]. Jeevamrit enhances microbial activity by introducing a diverse range of beneficial microorganisms, which improves soil fertility through the breakdown of organic matter and the mineralization of nutrients. Notably, the bacteria within Jeevamrit facilitate nitrogen fixation, increasing nitrogen availability and reducing reliance on synthetic fertilizers, while phosphate-solubilizing bacteria convert insoluble phosphorus into accessible forms, crucial for plant development [45]. Additionally, Jeevamrit improves soil structure and aeration, promoting healthy root systems that can access a larger volume of soil, thus enhancing nutrient and water uptake. By stimulating mycorrhizal fungi, it fosters symbiotic relationships that improve absorption of nutrients, particularly phosphorus and micronutrients [Saharan et al., 2023]. Furthermore, Jeevamrit aids in pH regulation and increases soil organic matter, which enhances cation-exchange capacity (CEC) for better nutrient retention [40]. The beneficial microbes also suppress harmful pathogens, leading to healthier plants that can efficiently utilize nutrients. Ultimately, the combined effects of increased nutrient availability, improved soil health, and enhanced microbial diversity lead to superior plant growth and yield, establishing Jeevamrit as a powerful tool for promoting sustainable and productive farming systems. However, when growing marigolds, one might take cuttings several times from the same mother block which reduces the vigour and vitality of the plant with time resulting into reduced length, diameter, number of roots, rooting percentage and ultimately survival of rooted cuttings (Table 5, Table 6, Table 7, Table 8). This is so because the mother plant loses strength and size with each harvest and hence the growth and yield of plants raised from third and subsequent flush of cutting is relatively low and may not be as good in quality (Table 13). The number of harvests should also be taken into consideration by growers when planning for their cultivation practices in order to achieve the best growth and quality of the flowers. The results got support from the findings of Druege, [43,55]. The increased rate of decomposition of organic matter in soil, a process which is mainly driven by microorganisms, is probably due to the negative correlation between microbial diversity and organic carbon in soil (Fig. 3). This inverse relationship is supposed to be so due to the fact that microorganisms are involved in the process of breaking down organic matters into simpler compounds and make them available to plants. Hence, as microbial loads rise, their metabolic rates rise and this enhances the rate of decomposition of organic matter and a decline of organic carbon. The present investigation got support from the findings of [56]. Conclusion This study highlights the positive impact of natural farming practices, particularly the use of Jeevamrit, on marigold growth and yield for both cuttings and flower production. Summer emerged as a favorable season for cultivation, likely due to enhanced nutrient uptake by plants. Jeevamrit application demonstrably increased yields, potentially by stimulating microbial diversity and nutrient absorption. This effect may be linked to the synthesis of plant hormones, leading to higher-quality cuttings with increased diameter, rooting percentage, and ultimately, improved survival rates. Similar beneficial outcomes were noted in flower yield. This study illuminates the potential of Jeevamrit as a viable alternative to chemical fertilizers in marigold cultivation as well as production, highlighting its value for sustainable agriculture. To further study its efficacy, future research should focus on expanding these findings to encompass a wider range of crops and geographical regions. Investigating the optimal formulation and application methods of Jeevamrit will be crucial in maximizing its benefits for both crop yields and environmental sustainability. Such research endeavors will contribute to a more comprehensive understanding of Jeevamrit's potential and its role in shaping a more sustainable agricultural practice. CRediT authorship contribution statement Nitesh Kaushal: Writing – review & editing, Writing – original draft, Visualization, Software, Methodology, Investigation, Formal analysis, Data curation, Conceptualization. Bharati Kashyap: Writing – review & editing, Writing – original draft, Visualization, Validation, Supervision, Resources, Project administration, Methodology, Investigation, Funding acquisition, Conceptualization. Balbir Singh Dilta: Writing – review & editing, Formal analysis, Data curation. Data availability The original data is presented in the article. Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.