Exploring the role of grafting in abiotic stress management: Contemporary insights and automation trends Authors: Kaukab Razi, Preethika Suresh, Pritam Paramguru Mahapatra, Musa Al Murad, Ajila Venkat, Michitaka Notaguchi, Dong Won Bae, Muthu Arjuna Samy Prakash, Sowbiya Muneer Published: 2024 ABSTRACT AbstractGrafting is a technique that involves attaching a rootstock to the aerial part of another genotype or species (scion), leading to improved crop performance and sustainable growth. The ability to tolerate abiotic stresses depends on cell membrane stability, a reduction in electrolyte leakage, and the species of scion and rootstock chosen. This external mechanism, grafting, serves as a beneficial tool in influencing crop performance by combining nutrient uptake and translocation to shoots, promoting sustainable plant growth, and enhancing the potential yield of both fruit and vegetable crops. Grafting helps to enhance crop production and improve the capacity of plants to utilize water when undergoing abiotic stress, particularly in genotypes that produce high yields upon rootstocks that are capable of decreasing the impact of drought stress on the shoot. The rootstock plays a pivotal role in establishing a grafted plant by forming a union between the graft and the rootstock. This process is characterized by its integrative, reciprocal nature, enabling plants to tolerate abiotic stress conditions. Grafting has been shown to alleviate the overproduction of lipid peroxidation and reactive oxygen species in the leaves and roots and enhance drought tolerance in plants by maintaining antioxidant enzyme activities and stress‐responsive gene expression. Phytohormones, such as cytokinin, auxin, and gibberellin, play a critical role in maintaining rootstock‐scion interactions. This review unveils the role of grafting in mitigating various environmental stressors, establishment of a robust graft junction, physiology of rootstock‐scion communication, the mechanism underlying rootstock influence, hormonal regulations and the utilization of agri‐bots in perfect healing and further cultivation of vegetable crops through grafting.Keywords: abiotic stress, automation, crop physiology, crop productivity, molecular physiology, plant grafting, stress management INTRODUCTION Over the past 5 years, the cultivable area and crop production of vegetables in India have increased drastically by 11.23% and 10.57% respectively, (Agricultural statistics at a glance, 2022). However, there is instability in production at national level (Bhuyan & Kotoky, 2023). Vegetable crops are extremely susceptible to climatic fluctuations. A shift in the solar cycle is the primary cause of crop failure or complete loss. The varieties of many agricultural products with higher yields have been developed or are now under development. Some cultivars, meanwhile, are unable to deliver this potential in fields despite having high yield values under controlled conditions (Dhar et al., 2023). It is of the utmost significance to raise the yield in addition to the production of high‐quality vegetables so that demand can be fulfilled at both the level of production and the level of consumption. Increasing the production of quality products also increases the yield (Ngoune Liliane & Shelton Charles, 2020). However, significant diseases and infestation of insect pests, coupled with the challenges posed by the climate and the soil, are the most common factors that limit the yield and productivity of vegetable crops (Dhar et al., 2023; Kumar, 2023). Plants must sense, classify, and transmit various stress signals before activating downstream reactions and allocating resources. To address the great challenge of climate change, the response to various stress exposures must be researched (Tanaka et al., 2023). Drought, salinity, and extreme temperatures are the primary environmental factors limiting the sustainable production of agricultural and horticultural commodities. Heat stress refers to an increase in temperature that exceeds the threshold level for a period of time, causing harm to plant growth and development. Heat stress causes interference with the establishment of seedlings (Hu et al., 2020; Jyothsna, 2022; Zhao, Zhang, et al., 2020). The plant experiences desiccation, burning, and hindrance in growth due to disruptions in various physiological activities such as pollen formation, photosynthesis, total biomass, spikelet sterility, and disrupted maturation and quality of grains and fruits (Jyothsna, 2022; Zhao, Zhang, et al. 2020). Temperature changes can have a substantial effect on plant physiology because each species has an optimal temperature for growth. For example, Perdomo et al. (2017) reported that the activity of Rubisco (the central enzyme in photosynthesis) and its substrate, ribulose‐1,5‐bisphosphate (RuBP), decreased at high temperatures, resulting in a significant decrease in yield. Besides, temperature changes play an important role in plant physiological activities, from germination to reproduction, (Hu et al., 2020; Jyothsna, 2022; Zhao, Lu, et al. 2020). Drought stress is a multi‐dimensional abiotic stress that modifies the morphological, physiological, biochemical, and molecular characteristic of a crop (Kaur & Asthir, 2017). Moreover over, reduced seed germination, seedling development, poor vegetative and reproductive growth, decreased plant height and leaf area, and significant reductions in leaf weight, photosynthesis, stomatal conductance, and total dry matter are the essential effects of drought stress on vegetable crops (Salehi‐Lisar & Bakhshayeshan‐Agdam, 2016). Inhibition of shoot growth during drought reduces the plant's metabolic demands and mobilizes metabolites for the synthesis of protective compounds necessary for osmotic adjustment (Salehi‐Lisar & Bakhshayeshan‐Agdam, 2016; Tanaka et al., 2023). Grafting, a vegetative propagation process, joins rootstock and scion from two plants of the same or different species (Bayoumi et al., 2022). Rootstock is the underground plant component that becomes the root system, whereas scion is the aboveground part that becomes the shoot system of the scion plant (Dhar et al., 2023). The agricultural practice of grafting, which involves attaching modern vegetable cultivars onto stress‐resistant rootstocks in order to increase the plants' adaptability or resistance to a variety of environmental stresses, has recently gained in favor (Majhi et al., 2023). The method has mostly been used in two significant vegetable families, namely, Cucurbitaceae and Solanaceae (Dhar et al., 2023). Several improved characteristics of grafted crops have been linked to grafting's capability to enhance vegetable crop resistance to both abiotic and biotic stresses, involving (a) improved water relations; (b) boosted nutrient and water absorption; (c) stronger root system; (d) photosynthetic efficiency; (e) transmission of short RNAs, mRNAs, and proteins over long distances; (f) additional hormonal signaling; and (g) raised antioxidant security (Kumar, 2023). Grafting combines the benefits of “resistant plant material” with increased vigor from rootstocks. Grafting may help plants tolerate abiotic stresses including drought and low root‐zone temperatures (Keatinge et al., 2014). Rootstock characteristics determine the efficacy of grafting under stressful conditions. They also help to reduce fungal problems in the soil and the need for agrochemicals, they also make plants more resistant to abiotic stresses (Luna‐Garcia et al., 2023). Rootstocks can also enhance scion tolerance via long‐distance communication signals, including Ca2+ signals, plant hormones, reactive oxygen species (ROS), peptides, RNA, water, and nutrients (Wang et al., 2023). Therefore, the efficacy of grafted plants depends on the compatibility of the scion and rootstock (Coşkun, 2023). It was reported by Dhar et al. (2023) that rootstocks play a vital role in developing tolerance to environmental stress and improve quality, vigor and ultimate yield of the crop. For instances of low compatibility, in addition to the decline in quality and production of the resultant product, fatalities in plant organisms may occur. The success of grafting is influenced by various factors, including the suitable pairing of rootstock and scion, as well as the shared anatomical, physiological, and genetic traits between them. Additionally, the environmental conditions and the specific growth environment of the plant also play a role in determining compatibility. The presence of incompatibility results in a decline in the quality characteristics of the fruit, particularly its internal values such as sugar and fructose content, while the size of the fruit remains unaffected (Adigüzel et al., 2022; Pradeepkumara et al., 2022). Despite the vast amount of research conducted on vegetables over the past several decades, there are still voids in our understanding of the responses of vegetables to abiotic stress as well as compatibility of grafts (Khalid et al., 2023). Modern genomics (mass spectrometry, genome‐wide association studies, gene editing, genomic selection, and transgenic breeding), proteomics, transcriptomics, and the use of next‐generation sequencing provide an array of novel, potent approaches for examining vegetable crops (Mangal et al., 2023). When grafted plants are employed as a method to improve abiotic stress tolerance, two primary issues still persist. The first step is to choose the appropriate blend of rootstock and scion so that it can withstand the real or anticipated abiotic stress factors. The second step is to extend the abiotic stress tolerance (robustness) of vegetable crops by improving our understanding of the underlying tolerance processes. This may help the breeding of rootstocks that broaden this tolerance (Rouphael et al., 2017). Traditional varieties exhibit susceptibility to various stressors in several places. Hence, taking into account the intricate nature of genetics and the influence of environmental factors, employing a more comprehensive and interdisciplinary approach presents a superior technique for enhancing stress tolerance in contemporary agricultural crops (Chaudhary et al., 2019). Biotechnological methodologies like plant genetic modification, genome editing technology, and large‐scale gene expression analysis have expanded the understanding of plant stress response molecular regulatory networks. These methods confirm the efficacy of drought responsive genes and produce drought‐resistant cultivars, as noted by Taheri et al. (2022) and Roychowdhury et al. (2023). Moreover, grafting requires skill and precision to ensure a successful outcome; it has varied success rates. The limited availability of grafting tools is another major disadvantage (Dhar et al., 2023). To overcome these problems, it is essential to select compatible plant materials, follow proper grafting techniques, maintain ideal environmental conditions, and implement appropriate aftercare practices. The implementation of mechanized grafting was initiated with the objective of mitigating the potential occurrence of graft union failure (Dhar et al., 2023). The utilization of an automated grafting robot has demonstrated significant enhancements in both the efficiency and survival rate of grafted seedlings. This technological advancement has considerable importance in meeting the requirements for the commercialization and widespread adoption of vegetable cultivation practices (Pradeepkumara et al., 2022; Yan et al., 2022). In India, a grafting robot has been created as part of the NAHEP‐CAAST‐DFSRDA‐VNMKV initiative, namely, within the Agri‐bot division located in Parbhani. The robotic system is capable of doing various tasks like as clipping, moving, positioning, cutting, binding, and wrapping the rootstock and scion together. The success rate of grafting performed by the robot is 87.3%, whereas the success rate of binding achieved is 68.9%. The process has the capacity to successfully graft between 700 and 800 rootstocks during a single hour (Dhar et al., 2023). Therefore, research gaps and constraints like abiotic stress, grafting practices to use for abiotic stress tolerance, and compatibility of graft junctions and the robots used for grafting were taken into consideration for this review. The review highlights the most recent findings on the role of grafting in alleviating important abiotic stresses, the mechanism behind graft union formation, crop response, and healing to these stresses the potential approaches to maximizing graft compatibility and investigating the metabolite transferred during scion‐rootstock interaction and robotics used for grafting. Additionally, glance at physiological and omics‐based strategies for increasing vegetable resilience under abiotic stress conditions using grafting practice and graft mechanization is summarized in this review. GRAFT COMPATIBILITY AND INCOMPATIBILITY: CHALLENGES AND EXCEPTIONS Grafting is a primitive asexual propagation technique through which two separate plants can be attached and developed into one. Graft compatibility depends on the specific family or families being utilized for grafting, as well as on the varieties, grafting tools used (Goldschmidt, 2014; Pina et al., 2017). For monocot plants, grafting is difficult because of their vascular bundle structural orientation, whereas in dicot plant species, it can be easier due to vascular bundle arrangements (Santa‐Cruz et al., 2002). The survival of the grafted plant also depends on the nature and structure of vascular bundles (Goldschmidt, 2014; Lee et al., 2010). For proper graft structure formation, both rootstock and scion must have a compatible nature towards each other (Moore, 1984); hence, compatibility plays a major role in attaining a good graft junction (Melnyk et al., 2015). Trinchera et al. (2013) reported that for graft junction, a graft bridge between cambium structures from both rootstock and scion further develops to callus proliferation, and by the end of a marginal gap of grafting, there is differentiation between tissues among scion and rootstock. Initial graft union formation does not prove long term compatibility (Goldschmidt, 2014); for example, in Cucurbitaceae, it was observed that the successful graft junction failed after a month of grafting (Aloni et al., 2008; Edelstein et al., 2004). Incompatibility despite not being quantitative trait, it can be differentiated using specific morphological characters such as mortality of the stock, scion, or both (Goldschmidt, 2014). According to Moore (1984), enough evidence of a specific biochemical mechanism for graft compatibility/incompatibility is not documented. However, there are two kinds of graft incompatibility reported: (1) translocated and (2) localized (Zarrouk et al., 2010). Translocated incompatibility includes symptoms that can be found in the early stage of development, which include scion and rootstock growth termination at an early stage, reduction of carbohydrate translocation at graft union, shrinking of leaves, and leaf chlorosis leading to early dropping of leaves. In localized incompatibility, malformation at the union due to physiology and morphological variations takes place, which results in weakened graft union development at the junction (Errea, 1998). Grafting is a practice where several combinations between rootstock and scion can be made such as by selecting rootstocks those are resistant towards abiotic stresses and selecting scions that have capability to provide more number of flowers and fruits. Similarly, one species can be taken as a rootstock and another species as a scion. However, graft combinations are not explored due to various compatibility barriers that includes (i) the genetic changes of adjacent cells of the graft junction (Hartmann, 2014; Tsaballa et al., 2021; Wulf et al., 2020); (ii) anatomical or physiological difficulties between scion and rootstock, position of vascular bundles (Melnyk, 2017; Melnyk & Meyerowitz, 2015); (iii) inadequate cell–cell recognition (Pina et al., 2012); (iv) the triggering of stress response at graft junction (Aloni et al., 2008; Baron et al., 2019; Irisarri et al., 2015; Pina et al., 2012); and (v) toxic compound transference (Goldschmidt, 2014; Moore, 1982). Therefore, exploring several combinations of graft unions such as species‐species, homo‐grafts, hetero‐grafts, resilient rootstock, and resilient scion will bridge the gap for graft compatibility. Precisely in horticulture, homo‐grafts mean that both the rootstock and scion belong to the same species, which is considered to be always compatible in nature. In hetero‐grafts, rootstock and scion belong to different species (Yeoman & Brown, 1976). In autograft, both rootstock and scion belongs to same plant and the same species (Wang, 2011); there is intraspecific graft where both genus and species are same and inter‐specific graft where both scion and rootstock genus are same but species are different and are almost sa web compatible in nature (Mudge et al., 2009). Research by Schöning and Kollmann (1997) and Flaishman et al. (2008) confirmed that due to long‐distance genetic and physiological rejection, the heterograft incompatibility increases. However, incompatibility may occur in a rather unpredictable way even between closely connected genera within the same family. In comparison to compatible tomato homograft, reciprocal grafts of tomato (Solanum lycopersicum L.) and pepper were considered severely incompatible within the Solanaceae, whereas tomato and eggplant (Solanum melongena L.) were only moderately so (Kawaguchi et al., 2008). In recent times, a new concept has been introduced called as “ultra‐compatibility” (UC) , where the graft plant is considered as superior quality. In UC, the genetic exchange such as transfer of DNA and RNA will be easy and highly compatible between rootstock and scion such as exchange. The grafted plant species is considered to be beneficial in terms of genetic exchange and expression (Nesbitt & Gartler, 1971). Genes with non‐autonomous functions impact cellular phenotypes outside of the cellular context of expression, suggesting the presence of an unstable signal, and genes with autonomous functions directly affect the phenotype of the cells in which they are expressed. Similar to this, non‐autonomous UC traits are transferred across the graft junction and affect the reciprocal organ system, while autonomous UC traits are restricted to the tissues in which they emerge (Brandon et al., 2021). Grafting top scion cultivars onto wild rootstocks results in a dual plant system with better stress tolerance in the rootstock and superior fruit traits in the scion. For example various studies on grafting has proved, enhanced salinity tolerance (Asins et al., 2015; Di Gioia et al., 2013; Singh, Kumar et al., 2020), resistance to drought tolerance (Kumar et al., 2017; Liu et al., 2014; López‐Serrano et al., 2019; Sánchez‐Rodríguez et al., 2012; Yao et al., 2016) and withstand flooding (Peng et al., 2020). Besides abiotic stress, it also alleviates biotic stress, which includes soil‐borne diseases caused by multiple pathogens (Louws et al., 2010) like bacterial wilt in tomato plants. Many of the autonomous traits are directly linked to rootstock, which may have advanced root architecture for having adaptiveness to both biotic and abiotic conditions (Williams et al., 2021). Moreover, rootstocks are directly in contact with soil microbiota (Liu et al., 2018; Marasco et al., 2018; Poudel et al., 2019) thus helps the grafted plant disease resistant and for better ion uptake based on the genotypes used for grafting (Baxter & Dilkes, 2012; Guan et al., 2012). The extent to which beneficial independent traits can be adapted across diverse grafted species is largely determined by whether these abiotic and biotic stress tolerance mechanisms are conserved across species (Williams et al., 2021). On the other hand, non‐autonomous traits are more difficult to monitor mechanistically because they suggest the possible existence of an underlying mobile signal at the graft junction, which involves the exchange of signals from gene active during the process of grafting. Also, similar to heterotic connections in hybrid breeding, specific genotypic rootstock‐scion combinations frequently interact synergistically to create UC non‐autonomous traits (Birchler et al., 2010). In addition to that, grafted genotypes are considered to be a single because of transfer of genetic materials from rootstocks to scions or vice versa (Williams et al., 2021). The grafting techniques have been greatly improved over time, however, the compatibility between scion and rootstock is still not improved. The plants decide the graft compatibility based on their physiology and morphological traits as described in Figure 1. Rootstock‐scion interactions have a complex and unclear role in fruit crop growth, reproductive potential recognition, fruit set, yield efficiency, and quality traits (Adıgüzel et al., 2023). Future rootstock selection and application could benefit from a better understanding of the interactions between rootstocks and scions. Schematic representation of graft compatibilities and changes in the physiology of grafted crops; compatible, ultra‐compatible, and incompatible. The figure explains graft compatibility, incompatibility, and ultra‐compatibility among hetero and homo‐grafts. Arrows indicated with an upward green color indicate an increase in several metabolic activities such as cell‐to cell recognition, stress response, cambium formation, root architecture, tissue recognition, and phenotypic expression (positive increase). Red arrows with downward direction indicates negative changes such as decrease in cell‐to cell recognition, and toxic compound transferase (negative decrease). Similarly, red arrows with upward direction indicates increase in genetic distance, physiological difficulties, and stress triggering response (negative changes). The complexity of graft union compatibility is still unclear, as the finding takes several years for woody fruit crops, which ensure the aligned development of tissues in the scion and rootstock regions. Besides, it is also unclear for grafting what kind of genotypes can be considered for successful grafting. It is also unclear what lighting conditions, humidity, and so forth can be adapted for successful grafts. ROLE OF GRAFTING IN ABIOTIC STRESS TOLERANCE Grafting works as a propitious tool (ancient time practice) that helps in controlling the crop improvement in performance of combining the nutrient uptake and translocation to shoot, sustainable plant growth and potential yield production of both vegetable and fruit crops (Rasool et al., 2020). As grafting is often known to be an integrative reciprocal and a highly promising process, which gives the capability to the plant to tolerate the abiotic stress conditions by making a graft junction having the rootstock genotype (tolerant); this helps the plants overcome or reduce the adverse effects of abiotic stresses (Rouphael et al., 2017; Yang et al., 2023). Grafting has been used as a tool to decrease or avoid the loss in yield production, which is due to the effect of severe environmental conditions or abiotic stresses (such as salinity, heavy metals, drought, high amounts of trace elements, cold, heat, soil pH, and flooding) (Oyebamiji et al., 2024; Rouphael et al., 2017) in fruits and vegetable crops. Rootstock has the capability to reduce the effect of external stress on shoot region (Colla et al., 2013) and also enhance the robustness and root growth (Gaion et al., 2018) without being dependent on any mechanisms to tolerate an unfavorable abiotic stress condition (Nordey et al., 2020). Grafted plants have shown an increase in physiological, morphological (also, it can increase the leaf foliage), and photosynthetic parameters under various abiotic stress conditions, along with the decrease in cellular damage (Coşkun, 2023; Fullana‐Pericàs et al., 2020; Singh, Sethi et al. 2020). Grafting has become an efficient way for mitigating abiotic stresses such as drought, salinity, and temperature (Melnyk, 2017). It has become an essential process for improving plant development (Rouphael et al., 2018) and increasing the performance of plants under the environmental stresses or abiotic stresses (Rivero et al., 2003; Schwarz et al., 2010). Grafting has been in use (mostly in horticultural crops) to alter the growth habits of scion part in the grafted plants by changing its size, improving fruit quality and yield (Noor et al., 2019) and maintaining the growth vigor (Lee et al., 2010; Melnyk, 2017); also, it has the ability to alter the ionic accumulation in certain horticultural crops (Nawaz et al., 2016). Grafting and drought stress Water is a resource that is rapidly evolving to be economically insufficient in many regions of the world, mainly semi‐arid and arid areas. It has been noticed that there is a requirement of water to be used in different areas such as industries and agriculture for the continued irrigation in the production of commercial vegetables (Schwarz et al., 2010). Grafting is a better technique in helping crops to perform well under drought conditions, for high crop yield when tolerant to drought is grafted with susuptible genotypes (Yang et al., 2023). It has been estimated that the root system architecture (RSA), root hydraulic conductivity, root‐to‐shoot ratio, and root biomass usually get reduced under drought stressed conditions (Yang et al., 2022). These effects can be mitigated by using the drought‐resistant genotype/seedlings of plants to perform grafting. There are several studies conducted on grafting and drought stress, for example, cucumber grafted with pumpkin (Ashok Kumar & Sanket, 2017). The scion region of mini‐watermelon was grafted onto the commercial rootstock PS1313 (Cucurbita maxima Duchesne × Cucurbita moschata Duchesne); it showed an increase of 60% (marketable range) in yield (more than 115% in total) under water stress conditions when compared to non‐grafted watermelon plants (Rouphael et al., 2018). Similarly, grafting performed on kiwi‐fruit (four species of Actinidia grafted with Actinidia chinensis) has proven to be resistant towards water stress by analyzing their hydraulic conductance (Clearwater et al., 2004). Similarly, it has been observed that grafting the sensitive okra genotypes onto the tolerant genotypes (Coşkun, 2023) helped in mitigating the adverse effects of drought stress with an improvement in physiochemical parameters and reduction in ROS (Razi & Muneer, 2021). The plants such as polyploid mulberry (Morus alba L.) (Hui et al., 2024) and young European pear (Pyrus communis L.) (Asayesh et al., 2023) were grown under drought stress, and grafting process was performed to develop the tolerance towards the drought stress. The plants under drought stress produce different forms of ROS mainly hydrogen peroxide, which has the ability to damage various cellular components by the production of lipid peroxidation (LPO), membrane destruction, and protein damage (Das & Roychoudhury, 2014). Grafting has played an important role in alleviating the over production of LPO in several crops under drought stress such as in grapevines (Tandonnet et al., 2010) and tobacco (Kumar et al., 2017). In woody crops such as kiwi, it has been found that the variation in phenology such as hydraulic conductance and photosynthesis between the rootstock and scion combinations appears to be in control for the effect of rootstock on shoot growth (Clearwater et al., 2007). A tolerance towards abiotic stresses depends upon the cell membrane stability, reduction in electrolyte leakage, and the species of scion and rootstock chosen for the study (Ranjbar & Imani, 2022). From previous studies (Serra et al., 2014; Soar et al., 2006), it is known that in heterografted grapevines minimized the effect of drought stress by maintaining the transpiration of plant via chemical signaling (Serra et al., 2014; Soar et al., 2006; Stoll, 2000) proving heterografted crops have greater tolerance towards abiotic stressors. Also, in another study (Liu et al., 2014), it has been found that grafting the tolerant rootstock genotypes helps the plants in enhancing the drought tolerance trait in tobacco. Furthermore, it has been observed that the resistance mechanism towards drought stress is through rootstock and scion interaction in almonds (Ranjbar & Imani, 2022). It was also found that grafting the rapeseed (Brassica rapa subsp. Rapa) scion onto the turnip (B. rapa subsp. Oleifera) rootstock increases the rapeseed tolerance towards drought stress, as turnip has been noticed to be drought tolerant when compared to rapeseed. In another study, drought stress led to the changes in epigenetic modification on stress marker gene (proline)‐P5CS1‐2 (gene‐homologue of P5CS1) and induced its transcript level during the drought stress (Luo et al., 2020). In another study conducted on tomatoes, it was reported that grafting improved drought tolerance by enhancing photosynthetic capacity and also reduced the ROS accumulation (Zhang et al., 2019). Grafting and salinity stress Salinity is one of the major issues for the loss of crop productivity due to sources of irrigation used and alkaline soils. Initially, conventional breeding methods were used in order to improve the salt tolerance, but it resulted in limited success as their salt tolerance characteristics were genetically and physiologically complex in nature (Cuartero & Fernández‐Muñoz, 1998; Flowers, 2004). Grafting has been employed due to its simplicity and affordability, mainly for the improvement of salt tolerance capacity in tomato plants; that study had commercial tomato “Jaguar,” which was grafted onto the tomato rootstocks such as “Radja,” “Pera,” “Volgogradskij,” and also with a hybrid tomato rootstock Volgogradskij × Pera under salt concentrations (0, 25, 50, 75 mM) (Colla et al., 2010; Estan et al., 2005). Tomato scion was grafted onto the tobacco (solanaceous species) rootstock, which has shown salt tolerance ability (Ruiz et al., 2006); thus, this combination of tomato and tobacco was coined to be “tomacco” in a previous study (Yasinok et al., 2009). Similarly, by grafting a salt sensitive tomato like “moneymaker” along with tolerant rootstocks such as “Pera” and “Radja” under 50 mM salt condition had the capability of mitigating the harmful effect of salinity which resulted in an increased fruit yield when compared to self‐grafted tomato plants (Martínez‐Rodríguez et al., 2008; Santa‐Cruz et al., 2002). “Pera” has the potential to ameliorate the salt tolerance traits in plants when being cultivated under saline conditions. There was a significant difference in plant growth especially in case of stem growth rate in tomato plants under salt stress; “Charlotte” scion was grafted onto the “Cyndia” rootstock, which resulted in an increased stem growth rate and that remained dissimilar from the non‐grafted tomato plants (Balliu et al., 2007). It has been noticed that the rootstock of “unifort” had an ability to reduce the transportation of Na+ and Cl− ions to the aboveground level parts when the scion region of tomato (cv. “Faridah”) was grafted onto the rootstock “unifort,” which showed diminished effect of salinity stress when compared with non‐grafted tomato scion (Al‐Harbi et al., 2017). A previous report has shown a significant increase in yield up to 80% with grafted plant when compared to self‐grafted and non‐grafted tomato plants under salt stress conditions. It was also observed that there was significant reduction in root dry mass in tomato plants under severe saline conditions (100 and 150 mM); however, the level of reduction was less in grafted when compared to non‐grafted plants (He et al., 2009). The major reason behind the salinity stress tolerance in the studies is due to the root system and its root characteristics, which play a vital role in soil related salinity stress; the root system has the capability to alleviate the effect of salinity stress, especially on the growth of shoot and in overall yield. The plants or crops after being grafted obtain a capacity to develop the properties of salt tolerance with respect to the decrease in the Na+ and Cl− ions into the shoot region (Rouphael et al., 2017). Furthermore, it has been noticed by Colla et al. (2010) that there has been an improvement in nutrient uptake such as potassium and translocation to shoot in case of salt tolerant grafting conditions, which further resulted in the decrease in nutrient deficiencies and imbalances caused by salt stress. The exclusion of Na+ and/or Cl− in grafted vegetables under saline conditions has been linked with the reduced traits of the morphological root system, especially total root length, total root surface, root diameter, and number of root hairs and also their length (Colla et al., 2010). Beside, tobacco plant roots have shown a better adaptive response to saline conditions when compared to tomato plants; the difference was well‐identified with level of proline content and the antioxidant enzymes such as APX and CAT (Sun et al., 2020). Similarly, watermelon plant grafted on to their salt tolerant rootstocks has shown an increase in the yield about 81% when it was grown under the greenhouse conditions (Colla et al., 2010). In a previous study (Goreta et al., 2008), it was noticed that there was an increase in shoot weight and leaf area in spite of salinity stress when watermelon (cv. fantasy) was grafted onto the strong‐tosa rootstock (C. maxima Duch × C. moschata Duch). The effect of grafting on the cucumber plants grown under salinity stress has shown an increase in the taste, flavor, and nutrient contents when compared to non‐grafted cucumber plants (Zhou et al., 2007). In another study which is reported on grafted cucumber plants' scion onto the fig‐leaf gourd which showed its capability to modulate the salt and water absorption and was avle to successively translocate to the scion region of the plant (Zhen et al., 2010). Grafting and thermal stress (heat and cold) Thermal stress (heat/cold) is another abiotic stress that has effect on plant productivity by changingthe plants' metabolic activities. Several methods have been deployed to practice in field to reduce the effects of thermal stress including grafting. The mechanism underlying grafting and thermal stress mechanism are not known; however, few studies have been carried out. For example, grafting of cucurbits has taken place with cucumber scion having Cucurbita ficifolia and Sicos angulatus L. in a previous study (Zhou et al., 2007), which has shown an improvement in vegetative growth and yield against low temperature stress condition. In another study (Shibuya et al., 2007), it is stated that there was a tolerance towards low temperature stress under sub‐optimal temperature, when the cucumber scion was grafted onto the squash rootstock (C. moschata Duch). The watermelon plant was used as a scion to perform grafting with the inter‐specific squash hybrid (C. maxima × C. moschata); this has resulted in improvement of propagating duration by cold period (Davis et al., 2008). The scion region of tomato (S. lycopersicum) plant was grafted onto the rootstock of Solanum habrochaites (hairy tomato), which has shown an effect of higher yields even at 10–13°C (Okimura et al., 1986). In Khah et al. (2006), the scion part tomato cv. Big Red was grafted onto the tomato cv. Heman (S. lycopersicum L. × Solanum hirsutum [Vahl Dunal]) and also with cv. Primavera (S. lycopersicum L.) where the authors have noticed that there were higher fruits produced when compared to the control group of plants. The brinjal scion was taken to graft onto the whole‐leaf rosin‐wood rootstock region (Solanum integrifolium × S. melongena), which has shown an increased yield production at 18–21°C (Okimura et al., 1986). In a previous report (Abdelmageed & Gruda, 2009), tomato was taken as a scion part, which was grafted with rootstock of brinjal where they have noticed an enhancement in vegetative growth at the temperature of about 28°C, a decrease in number of total fruit, and a reduction in dry weight. Brinjal scion was grafted along with heat tolerant rootstock (cv. nianmaoquie) where the prolonged period of growth stage and increase in yield up to 10% was observed (Wang et al., 2006). The highest yield was observed in the grafted plant where chili was taken as scion region and Capsicum annuum cv. Toom‐1 and 9852‐54 (AVRDC) (Palada & Wu, 2009). The scion region of chili plant was grafted onto the rootstocks of sweet pepper, which has shown a highest yield when grown under the high temperature stress (Palada & Wu, 2009). Grafting and heavy metal, metalloid and nutrient stress The usage of heavy metals such as mercury, lead, cadmium, and arsenic has been observed in many crops, and sources are mainly either from industries, waste water, or soil alteration (Alengebawy et al., 2021). There are certain heavy metals like arsenic and mercury, which are toxic even when it is used in the range of lower concentrations (Alengebawy et al., 2021). Several studies on metal toxicities in plants have been carried out, but very limited studies are reported on grafting and toxic metals. In few studies, researchers observed reduction in accumulation of copper in leaf and fruits (Rouphael et al. 2008) when grafted on to the Shintoza type rootstock of the same (C. maxima Duchesne × C. moschata Duchesne). Similarly, cadmium concentrations in the eggplant (S. melongena) were grafted onto Solanum torvum; the leaves and stem have shown a reduced level of Cd concentrations (67%–73%) (Arao et al., 2008). In another study (Edelstein & Ben‐Hur, 2007), it was noticed that when the melon plants (cv. arava‐galia type) were grafted on to the rootstock of cucurbita plant (TZ‐148), there was a reduction in boron (B), zinc (Zn), strontium (Sr), manganese (Mn), copper (Cu), titanium (Ti), chromium (Cr), nickel (Ni), and cadmium (Cd) compared to the non‐grafted plants. Grafting has shown a reduction in concentrations of cadmium in brinjal fruits when it was grafted onto the S. torvum (Arao et al., 2008). The trace elements' tolerance was studied with the cucumber “Akito” scion that was grafted on to the commercial squash rootstock “Shintoza,” which controlled the uptake and translocation of Cu to shoot, therewith alleviating an unfavorable effect of enormous Cu supply on yield of fruits and plant biomass (Rouphael et al. 2008). Grafting influences the absorption and translocation of nutrients such as nitrogen, calcium, magnesium, and phosphorus. For example, from a previous study, it was observed that grafting will improve the uptake of nutrients and plant photosynthetic rate (mainly during winter season) (Davis et al., 2008; Hu et al., 2006; Neocleous & Savvas, 2015). Grafting and flood stress Flooding stress can negatively impact plant growth and development, but plants have a number of ways to adapt it, and several agricultural practices are also followed to tackle it, and one practice among them is grafting. The mechanism of grafting and flooding stress is not well‐known; limited studies are reported. For example, the scion region of watermelon was grafted with the rootstock of bottle gourd in loam soil, which has the capacity to enhance the flood tolerance (Maurya et al., 2019). The grafting of cucumber scion part with the squash rootstock region has shown an increase in the chlorophyll content against flooding stress in a previous study (Kato et al., 2001); whereas in another report (Yetışır et al., 2003), the watermelon cv. Crimson Tide scion plant was grafted with the rootstock of Lagenaria siceraria SKP (Landrace), and it has shown a decrease in chlorophyll content, which is noticed in rare conditions. The scion part of tomato plant was used to graft with the brinjal accessions EG195 and E203, which has further resulted in the flood tolerance in a previous study. The scion region of the pepper plant was grafted with chili accessions “PP0237‐7502,” “PP0242‐62,” and “Lee B,” which has resulted in flooding tolerance (Ashok Kumar & Sanket, 2017). Grafting and alkalinity (soil pH) stress Extreme levels of soil acidity will lead to harmful circumstances for the vegetable crops in several areas of this world (Savvas et al., 2010). Plants or crops exposed to alkaline soil conditions have the increased amount of chemical present within can result in different physiological and biochemical disorders, it could end up in the reduction in growth and loss of yield (Alengebawy et al., 2021). In a previous study, it was reported that there were considerable changes in the biochemical and physiological parameters such as photosynthesis and nutrients when alkalinity is high in the grafted watermelon (Citrullus lanatus grafted with cucurbita species) (Colla et al., 2010). In another study, the authors have reported about the effects of five rootstocks such as “Long purple” (eggplant), Datura patula (datura), Solanum luteum Mill. (orange nightshade), Nicotiana tabacum L. (tobacco), and “Cal.jn3”‐S. lycopersicum L. (field tomato); these were grown under different alkaline conditions like as 0, 5, and 10 mM of NaHCO3 (Mohsenian et al., 2012). Thus, the study stated that there were high total soluble solids (TSS) content, maximal quantum yield of PS‐II photochemistry (Fv/Fm), performance index (PI) values, and photosynthetic pigment content in the plants that had Datura as their rootstock and rest remained vice versa. So, it was concluded that the datura rootstock has been a beneficial tool to enhance the alkaline tolerance in tomato plants, which are grown under (sodium bicarbonate) NaHCO3 stress (Mohsenian & Roosta, 2015) conditions. GRAFT UNION FORMATION: A DEEPER LOOK INTO THE ROOTSTOCK‐SCION RELATIONSHIP The successful establishment of a graft union is dependent on the careful selection of both rootstock and scion (Habibi et al., 2022; Rasool et al., 2020). The process of grafting involves the disruption of the plant's vascular system, which must be reconnected in order to facilitate water uptake and nutrient transport to the graft junction. This reconnection occurs through molecular, biochemical, and physiological pathways that resemble the tissue healing process following a wound (Habibi et al., 2022). Additionally, vascular reconstruction allows for the transport of macromolecules across the graft union (Rasool et al., 2020). The relationship between rootstock and scion can significantly impact the growth patterns, precocity in flowering and fruiting, fruit set and yield, quality and size, nutrient status, and disease resistance of the grafted plant (Kumar et al., 2022). For example, a scion may exhibit dwarfing characteristics only when grafted onto a dwarf rootstock, like var. M.9. apple. Conversely, the same scion may grow vigorously when grafted onto a particularly robust rootstock, like the M26 cultivar. However, it is important to note that vigorous rootstocks have a slower rate of fruiting than dwarfing rootstocks (Kumar et al., 2022). The choice of rootstock can also impact the plant's resistance to environmental stressors, such as high salt levels or winter damage. For instance, mandarin grafted onto Citrus jambhiri rootstock is more precocious than when grafted onto sweet orange, orange, or acid lime rootstocks. Overall, the careful selection of rootstock and scion is crucial for the successful establishment and growth of a grafted plant (Kumar et al., 2022; Mauro et al., 2022). The study on physiological aspects, movement of proteins, hormones, mRNA, and short RNA across the graft junction (Mauro et al., 2022) may greatly assist to understand the mechanism and communications between rootstock and scion (Figure 2). Representation of grafting (a) represents grafting and junction formation, (b) represents the signaling process between rootstock and scion such as transfer of mRNA, DNA, and sRNA movement across the graft union formation, (c) represents DNA methylation (created with Biorender.com, license provided). IAA, indole‐3‐acetic acid. GRAFT UNION FORMATION AND GENES INVOLVED Graft union formation in rootstock‐scion combinations involves a series of histological stages. The first stage is characterized by the formation and orientation of a necrotic layer (Melnyk et al., 2015; Rasool et al., 2020). In the second stage, callus cell proliferation occurs, leading to the growth of new tissue (Rasool et al., 2020). The third stage is marked by the formation of a callus bridge at the graft interface, connecting the rootstock and scion. This bridge plays a crucial role in the successful union of the two tissues (Fan et al., 2015). The fourth stage involves the formation of vascular cambium, which is responsible for the production of new vascular tissue (Melnyk et al., 2015). Finally, in the fifth stage, vascular tissue reconstruction takes place, completing the process of graft union formation. During this process, necrotic layers disappear, except in the outer cortex, where they usually become bark (Fan et al., 2015; Rasool et al., 2020). This disappearance is attributed to the activity of callus cells, which contribute to the regeneration of healthy tissue (Fan et al., 2015; Melnyk et al., 2015). Several mechanisms are involved in regulating rootstock and scion interactions during graft healing (Liu et al., 2023) (Table 1). One such mechanism is differential gene expression (Figure 1), specific genes, such as ANAC071 and RAP2.6L, have been expressed at the scion and rootstock cut surfaces in Arabidopsis inflorescence stems, respectively (Nie & Wen, 2023). The ANAC071 gene encodes a transcription factor that contains the NAC domain (no apical meristem [NAM], Arabidopsis transcription activation factor [ATAF], cup‐shaped cotyledon [CUC]). NAC transcription factors play a role in various kinds of plant activities, including environmental stress response, organ formation, and vascular development. ANAC071 is particularly involved with modulating cell differentiation and stress responses, which are critical for effective grafting since they can affect the development and stability of the graft interface. RAP2.6L transcription factor is found in the lower region of the wound site and is controlled by jasmonic acid (JA) and low auxin levels. It also enhances the cell division required for wound healing and graft stability. Both ANAC071 and RAP2.6L collaborate, with their expression being spatially controlled by the distribution of auxin, ethylene, and JA, all of which are required for optimal tissue regeneration after grafting. The expression of these genes is promoted by ethylene and JA. Additionally, the accumulation of indole‐3‐acetic acid (IAA) is observed at the scion cut surface, while its concentration declines at the rootstock cut surface. These gene expressions and IAA accumulation are essential for tissue reunion at graft formation in Arabidopsis thaliana (Asahina et al., 2011; Nie & Wen, 2023). TABLE 1Overview of genes/metabolites involved in mitigation of various abiotic stressors through grafting technique in vegetable crops.S. noCrop used for studyStressGene/metabolite typeGene/metabolite identifiedLocationMajor functionExpression levelFindingsAuthors and year1CucumberHeat stressGraft healing gene HSP70 CambiumFacilitates protein folding during heat stressUpregulatedHSP70 expression led to better survival rates in grafted cucumbers under heat stress.Li et al. (2014)2EggplantSalinity stressAbiotic stressor geneNa+/K+ transporterRootMaintains ion balance under salt stressUpregulatedNa+/K+ homeostasis was better maintained in salinized grafted eggplants.Park et al. (2023)3SoybeanWaterlogging stressAbiotic stressor geneERFRootsActivates anaerobic metabolism pathwaysUpregulatedERF gene expression improved waterlogging tolerance in grafted soybeans.Huang et al. (2023)4WheatHeat stressGraft healing geneROS scavenging enzymesLeaves/stemReduces oxidative damage under heat conditionsUpregulatedEnhanced ROS scavenging improved heat tolerance in grafted wheat.Reddy et al. (2023)5TomatoWaterlogging stressAbiotic stressor geneERF‐VIIRootsControls oxygen sensing and triggers anaerobic survival pathwaysUpregulatedERF‐VII enhanced root functioning in grafted tomatoes under flooded conditions.Zhang and Huang (2022)6CucumberDrought stressAbiotic stressor metaboliteProlineRoot/leavesActs as an osmoprotectant to maintain cell turgorUpregulatedDrought upregulated proline metabolism genes in grafted cucumber.Wang and Ren (2024)7CitrusDrought stressAbiotic stressor geneABA signaling genesLeaves/rootsRegulates osmotic balance during water deficitUpregulatedABA pathways were activated synergistically in grafted citrus plants under drought.Lin et al. (2022)8GrapevineSalinity stressAbiotic stressor geneIon transportersRoot/leavesBalances ion concentration during salt stressUpregulatedGrafted grapevines demonstrated improved salt tolerance via ion transport control.Zhang et al. (2022)9TomatoDrought stressAbiotic stressor gene DREB1A Roots/leavesEnhances drought tolerance by regulating water lossUpregulatedDREB1A expression improved water retention in grafted tomato plants.Krishna et al. (2021))10TomatoSalinity stressAbiotic stressor gene SOD, CAT Root/leavesDetoxifies reactive oxygen species (ROS)UpregulatedIncreased SOD and CAT expression resulted in increased salt tolerance in grafted tomatoes.Singh et al. (2021)11MelonCold stressGraft healing geneAntioxidantsLeavesScavenges ROS under cold conditionsUpregulatedUnder cold stress, grafted melon exhibited increased antioxidant activity.Rodriguez et al. (2021)12CucumberCold stressGraft healing gene HSP60 LeavesPromotes protein stability and stress recoveryUpregulatedHSP60 expression improved chilling tolerance in grafted cucumbers.Zhu et al. (2021)13RiceSalinity stressAbiotic stressor gene NHX1 Root/leaf cellsMaintains ion homeostasis inUpregulatedThe NHX1 gene helped grafted rice regulate ions in salty conditions.Kumar and Patel (2020)14WatermelonDrought stressAbiotic stressor metaboliteABALeavesRegulates stomatal closure and water retentionUpregulatedABA signaling was increased in grafted watermelon during drought conditions.Li et al. (2020)15TomatoDrought stressAbiotic stressor geneABA signaling componentsLeavesModulates stomatal behavior and drought responsesUpregulatedGrafted tomatoes' ABA pathways were modified for improved drought tolerance.Gao et al. (2020)16RiceSalinity stressAbiotic stressor geneAntioxidative enzymesRootsReduces oxidative stressUpregulatedIncreased antioxidant enzyme activity in grafted rice exposed to salt.Nguyen et al. (2020)17CucumberHeat stressGraft healing gene HSF‐A2 LeavesControls heat shock response pathwaysUpregulatedHSF‐A2 overexpression increased heat tolerance in grafted cucumbers.Wang and Ren (2024)18EggplantCold stressGraft healing gene LIP1 StemEnhances structural stability by promoting lignin biosynthesisDownregulatedReduced LIP1 expression resulted in flexible grafted eggplants under cold stress conditions.Wang et al. (2019)19PepperHeat stressGraft healing gene HSP90 Stem/leavesProtects proteins from heat denaturationUpregulatedHSP90 expression enhanced heat stress tolerance in grafted pepper plants.Ahmed and Ali (2019)20TomatoCold stressGraft healing metaboliteProlineStem/leavesActs as an osmoprotectant in low temperaturesUpregulatedGrafted tomato proline levels increased, indicating greater cold stress resilience.Wang et al. (2019) Overview of genes/metabolites involved in mitigation of various abiotic stressors through grafting technique in vegetable crops. The induction of ANAC071 expression is facilitated by the presence of auxin, upon binding to the promoters of XTH19 and XTH20; ANAC071 triggers their expression and promotes cell proliferation during tissue interaction, which can be marked as the end of the first stage (Nie & Wen, 2023). The XTH19 and XTH20 genes encode xyloglucan endotransglucosylase/hydrolases (XTHs), enzymes that play an important role in altering the plant cell wall by remodeling xyloglucan, a fundamental component of the wall matrix. In plant grafting, the ANAC071 transcription factor regulates XTH19 and XTH20, which are necessary for pith cell proliferation and tissue reunion in grafted plants. The XTH19 and XTH20 genes encode XTHs, enzymes that play an important role in altering the plant cell wall by remodeling xyloglucan, a fundamental component of the wall matrix. In plant grafting, the ANAC071 transcription factor regulates XTH19 and XTH20, which are necessary for pith cell proliferation and tissue reunion in grafted plants (Hyodo et al., 2003). DOF transcription factors are rapidly activated at wounding and regulate callus formation (Zhang et al., 2022). The callus proliferation accompanies with GH9B3 expression that facilitates cell–cell adhesion (Notaguchi et al., 2020). The GH9B3 gene encodes a glycosyl hydrolase that plays an important role in cell wall remodeling and is especially active during graft union formation. GH9B3 expression can be driven by the wound‐inducible promoter RAP2.6, indicating its participation in graft healing via cell wall remodeling (Notaguchi & Tsutsui, 2020). In the second stage, the cambium and parenchyma cells located at the cut surface of both the stock and scion undergo a robust division in response to the injury, resulting in the formation of callus (Aloni, 2021). This callus serves as a bridge, connecting the rootstock and scion (Aloni, 2021). Concurrently, the cells situated between the rootstock and scion initiate the transfer and exchange of water and nutrients through the plasmodesmata. In the third stage, as the callus between the rootstock and scion proliferates, the contact layer gradually disappears. Consequently, the callus between the rootstock and scion transitions from a state of close connection to being fused into a single entity. This transformation can pose challenges in terms of identification (Nie & Wen, 2023). The process of “cambialization” is redundantly influenced by ANAC071 and ANAC096, as per a recent report by Matsuoka et al. (2021). During the fourth stage of this process, new vascular bundles are formed in the callus at the rootstock/scion junction, leading to the formation of a complete plant body. The PIN‐formed proteins (PIN), auxin response factor 6 (ARF6), and ARF8 modulate the role of IAA in grafting. The differentiation of the xylem is controlled by monopteros (MP), which is influenced by these factors through the Arabidopsis Histidine Phosphotransferase Protein 6 (AHP6) gene. The MP gene encodes an auxin response factor (ARF) that is pivotal in regulating embryogenesis and vascular development. It is involved in orchestrating cell differentiation and division at wound sites, making it essential for tissue regeneration during grafting (Goda et al., 2004). Similarly, the differentiation of protophloem is regulated by the brevis radix (BRX) gene, while the ALF4 gene manages cell division and the xylem pole pericycle. BRX (BREVIS RADIX) gene produces a protein that influences root growth and development through cell division and elongation. It also controls auxin‐mediated growth responses, which are critical in rootstock‐scion interactions in grafted plants (Goda et al., 2004). The pre‐procambial cell specification is governed by the Arabidopsis thaliana homeobox 8 (ATHB8) gene (Smit et al., 2020). The ATHB8 gene encodes a transcription factor from the HOMEODOMAIN‐LEUCINE ZIPPER III (HD‐ZIP III) family. This gene is essential for the formation of vascular tissues in plants. ATHB8 is largely expressed in procambial cells, which are precursor cells that develop into vascular tissues. The gene is auxin‐inducible and plays a specialized role in increasing vascular strand differentiation and formation, including xylem development, in response to environmental and developmental signals (Baima et al., 2001). METABOLITE EXCHANGE AT GRAFT INTERFACE Grafting is a technique that can be employed to regulate the compositional characteristics of horticultural produce, encompassing the concentrations of primary and secondary metabolites. This intricate interdependence necessitates a multifaceted, two‐way communication network between the two plant partners, which involves the transfer of water, nutrients, hormones, peptides, nucleic acids, and other metabolites. The physiology and determinism of these mechanisms remain largely unexplored (Mauro et al., 2022). There are certain phytohormones that are involved in abiotic stress mitigation through grafting techniques (Sharma & Zheng, 2019). There are few studies reporting that the phytohormones such as cytokinin, auxin, and gibberellin play a vital role in maintaining the rootstock‐scion interactions (Aloni et al., 2010; Rasool et al., 2020). Plant hormones play a crucial role in the rootstock‐scion interaction during grafting, particularly in callus formation. It was also observed that cytokinins, auxins, abscisic acid (ABA), gibberellins, JA, and ethylene are involved in this process (Nanda & Melnyk, 2018). Notably, compounds such as IAA and 6‐benzyl adenine (6‐BA) can enhance xylem and phloem transport efficiency. These hormones also have a coordinating effect at the rootstock/scion contact area, stimulating cell differentiation and promoting callus formation. IAA synthesized in the scion leaves can be transferred to the rootstock, promoting the growth and development of lateral roots. By balancing the concentrations of cytokinins and ABA, the vigor of the scion can be increased, leading to improved vigor of grafted plants. Additionally, cytokinins and gibberellins transported through the xylem can promote branch growth and internode elongation of the scion partner (Jain et al., 2022; Nanda & Melnyk, 2018). In other studies, it has been found that ABA plays a crucial role in regulating stomatal closure in plant leaves. When plants experience drought stress, ABA can be transported from the rootstock to the scion, effectively controlling stomatal closure in leaves and enhancing the drought tolerance of grafted plants (Aloni, 2021; Jain et al., 2022; Melnyk et al.,2018). Additionally, JA, an oxidized lipid, is responsible for regulating the expression of defense genes in plants when they undergo cell damage. It has been also shown that under osmotic stress conditions, scion plant leaves can synthesize a higher amount of JA and transport it to the roots of the rootstock, helping to alleviate the damage caused by abiotic stress in the plant. Furthermore, melatonin has been found to contribute to the enhanced cold tolerance of grafted watermelon plants in conjunction with JA (Liu et al., 2021). Melatonin helps to reconstruct the cell wall near the graft interface that is secreted into the extracellular region. Apart from melatonin, sugar metabolism plays a crucial role in the formation of graft unions (Nie & Wen, 2023). In a recent study, Loupit et al. (2022) predicted graft compatibility and identified certain marker metabolites, such as asparagine, trans‐resveratrol, trans‐piceatannol, and α‐viniferin that were exchanged between rootstock and scion. The different metabolic markers between rootstock and scion can be analyzed using various omics technologies (Dong et al., 2022; Jain et al., 2022). Despite the current findings, the understanding of the link between stock and scion, the integration of vascular tissues, the use of plasmodesmata in union formation, and the exchange of material at the graft interface remain unknown. Extensive research is required to address these fundamental concerns. To further investigate these areas, the use of fluorescent markers and correlative light‐electron microscopy is recommended (Rasool et al., 2020). However, the roles of rootstock and scion, as well as the mechanism underlying rootstock influence, are still insufficiently understood. Exciting areas of future research include exploring the effect of rootstock diversity and molecular signaling during scion modulation. By exchanging rootstock in tomato grafts, leaf endophytic microbes of the scion cultivar were partially changed indicating bacteria and fungi could be preferentially associated with rootstock genotypes (Toju et al., 2019). The field of rootstock biology is still in its early stages, with important aspects such as long‐distance molecular signaling and the capacity of rootstocks to modulate the interaction between plants and soil (Warschefsky et al., 2016). Further research is needed to uncover the molecular signals underlying graft‐transmissible phenotypes, the extent to which large portions of DNA can traverse the graft junction, the impact of the soil on rootstock function and scion phenotype, and whether grafting induces heritable epigenetic changes that alter important agronomic traits. CRISPR TOOLS APPLICATION IN GRAFTING CRISPR (clustered regularly interspaced short palindromic repeats) tools are a new genetic engineering method that enables precise DNA editing in live organisms. The CRISPR‐Cas9 system, the most well‐known CRISPR tool, is based on a natural defense mechanism utilized by bacteria to guard against viruses. The method employs a guide RNA (gRNA) to target certain DNA sequences, and the Cas9 enzyme functions as molecular scissors, cutting the DNA at a precise position. After the DNA is cut, researchers can deactivate a gene or implant a new piece of DNA (Jinek et al., 2012). CRISPR tools are widely used in a variety of applications, including gene therapy, agricultural biotechnology, and fundamental biological research, due to their versatility and precision. CRISPR offers the ability to fix genetic abnormalities, treat and prevent diseases, and increase crop resistance. However, ethical problems and potential off‐target effects remain issues that must be addressed (Adli, 2018; Doudna & Charpentier, 2014; Hsu et al., 2014). CRISPR‐Cas12a (also known as Cpf1) is an advanced gene‐editing technology that has gained popularity for its unique qualities, such as the capacity to generate staggered cuts in DNA, high specificity, and flexibility in targeting sequences that CRISPR‐Cas9 cannot. Cas12a's characteristics make it especially effective for fine‐tuning complicated traits such as nutrient intake and stress resistance, both of which are important in vegetable grafting. When used in grafting plants, Cas12a can improve rootstock characteristics, leading in higher nutrient absorption and resistance to various abiotic stresses like as salt, drought, and nutrient deficits. For example, in crops like tomato and cucumber, to improve nitrogen assimilation, CRISPR‐Cas12a was used to target the NRT1.1B and NRT2.1 genes that govern nitrate uptake. When these altered rootstocks are utilized in grafting, the scion has higher nutrient availability, which leads to increased growth and yield even in nutrient‐limited situations (Zhao et al., 2020). CRISPR‐Cas12a can also be utilized to change rootstock genes involved in ion transport and compartmentalization, such as HKT1 (which regulates sodium transport) and NHX1 (which controls vacuolar sodium sequestration). Researchers fine‐tuned these genes to create rootstocks that are better able to handle high salinity levels, minimizing the harmful consequences of excess sodium. For example, in cucumbers, altered rootstocks with better sodium exclusion ability have been demonstrated to flourish in saline soils. When grafted onto non‐edited scions, these rootstocks improve the plant's overall salt tolerance (Erdoğan et al., 2023). Likewise, heavy metal contamination in soil, such as excess cadmium (Cd) and arsenic (As), is a significant abiotic stress that can limit plant growth and endanger food safety. CRISPR‐Cas12a has been used to improve rootstocks' sequestration and detoxification capabilities by targeting metal transporter genes such as HMA3 and NRAMP. A study on rice found that rootstocks altered with CRISPR‐Cas12a for OsHMA3 (knocked out) reduced cadmium accumulation in shoots while improving the root's ability to retain heavy metals. When grafted, these rootstocks considerably reduced heavy metal uptake in edible plant portions, resulting in safer food harvests. The effectiveness of CRISPR‐Cas12a in mitigating abiotic stresses in grafted vegetables is based on its precise and flexible editing capabilities, such as follows: (a) staggered DNA cuts for precise edits, which is especially useful when editing complex traits involved in stress responses, ensuring minimal off‐target effects while achieving the desired genetic change; (b) high targeting specificity as Cas12a recognizes T‐rich PAM sequences, which are distinct from those targeted by Cas9. This broadens the spectrum of genes that can be altered, allowing for more precise improvements in stress resistance pathways including as nutrient transporters, osmotic regulation, and root growth; and (c) flexible editing of polygenic traits, because abiotic stress responses frequently involve several genes. Cas12a's capacity to target many gene sites at once (multiplex editing) makes it an ideal tool for enhancing the polygenic characteristics that determine stress tolerance in rootstocks. This characteristic ensures that rootstocks in vegetable grafting can be developed to operate well under varied stress situations, allowing for robust plant development in a variety of environments (Erdoğan et al., 2023; Uga et al., 2018; Zhao et al. 2020). Another tool, CRISPR‐Cas13 is a unique RNA‐targeting technique that differs from the more well‐known DNA‐editing CRISPR systems, Cas9 and Cas12a. By targeting mRNA or non‐coding RNAs involved in stress responses, CRISPR‐Cas13 can assist control stress‐responsive pathways without permanently altering the plant's genome. This characteristic helps manage complicated and dynamic stress responses, such as those caused by various abiotic stressors (Abudayyeh et al., 2017; Liu et al., 2021; Mahas et al., 2021; Wessels et al., 2020). CRISPR‐Cas9 technology has helped to improves drought and salinity tolerance by developing rootstocks that are more resistant to drought and salinity. For example, Wang et al. (2020) employed CRISPR‐Cas9 to knock out the SlMAPK3 gene in tomato plants, which resulted in better drought tolerance when these modified rootstocks were grafted with wild‐type scions (Wang et al., 2020). The study found that grafted plants retained more water and experienced less oxidative stress during drought conditions. The mechanism involved in mitigation is that the beneficial genes (like DREB1 and AREB—genes help to tolerate stress particularly drought) are upregulated to preserve water and manage the osmotic pressure thus boosting the plant's resilience. Additionally, it is found that CRISPR‐Cas9 has been utilized in rice to edit genes that affect root depth and angle, such as OsNAC10 and OsDRO1. Plants with deeper and more spread‐out root systems have better access to water and nutrients during droughts. Enhancing these rootstock features in grafted plants using CRISPR‐Cas9 makes the entire grafted plant more resistant to water scarcity (Jeong et al., 2010; Uga et al., 2013). High salt levels cause an overabundance of sodium (Na+) ions in plant cells, disrupting their functioning. CRISPR‐Cas9 can target genes such as HKT1 and NHX1, which control salt transport and sequestration in plants. CRISPR‐Cas9 modifies these genes, allowing the plant to better manage ion balance and reduce the harmful consequences of salt. During grafting, rootstocks modified for better ion control improve the plant's overall salt tolerance (Munns et al., 2016; Zhao et al., 2016). CRISPR‐Cas 9 can also aid in mitigating temperature stress by modifying heat shock proteins (HSPs) and cold‐responsive genes (e.g., CBF and ICE1). For example, in tomato plants, CRISPR‐Cas9 was utilized to eliminate the SlHEAT1 gene in rootstocks, resulting in increased tolerance to both high and low temperatures. Grafted plants with these rootstocks had higher photosynthetic efficiency and less oxidative stress during temperature extremes (Zhang et al., 2019). CRISPR‐Cas13 was used to transiently reduce stress‐responsive RNA transcripts in cucumber rootstocks. When grafted with non‐edited scions, the changed rootstocks showed increased resistance to drought, heat, and oxidative stress (combined abiotic stress) (Liu et al., 2021). Drought and heat stress in cucumbers frequently result in increased ROS production, which can cause cellular damage. CRISPR‐Cas13 was also used to reduce expression of NADPH oxidases and increase expression of SOD1, which had the combined effect of promoting cellular homeostasis and upregulating antioxidant defenses (e.g., SOD1). As a result, plants have superior tolerance to the combined impacts of heat and drought, as seen by increased water retention, reduced leaf withering, and increased photosynthetic efficiency. The rootstock can buffer oxidative damage by reducing the expression of stress‐sensitive RNA transcripts related to ROS generation using CRISPR‐Cas13. When these rootstocks are grafted with non‐edited scions, the scion benefits from the changed rootstock's increased antioxidant capacity, which increases the overall robustness of the grafted plant (Liu et al., 2021). CRISPR tools such as Cas9, Cas12a, and Cas13 are revolutionizing the generation of grafted plants that are more resistant to diverse abiotic challenges such as temperature fluctuations, heavy metal toxicity, and oxidative stress. By targeting specific genes in rootstocks, these technologies provide accuracy in boosting plant resistance, resulting in grafted plants that perform better in harsh environments. Such applications hold significant promise for sustainable agriculture, especially in areas with high abiotic stress levels. TARGETED MUTAGENESIS AND GRAFTING Water and mineral nutrients absorbed by the roots of the rootstock can be transported to support the growth of the scion through the transport tissue. Induction of tracheary element formation by XYLEM CYSTEINE PROTEASE (XCP) facilitated water transport resulting in scion growth enhancement (Huang et al. 2023). Similarly, the scion can transport photosynthetic products to the root through the transport tissue (Melnyk, 2017; Nie & Wen, 2023). In a study conducted by Mo et al. (2023), it was found that the expression pattern analysis demonstrated the upregulation of seven CiARFs at specific time points during graft union formation. Among these, CiARF5 and CiARF2e were consistently upregulated and were also induced by drought stress and embryo development, respectively (Mo et al., 2023). Furthermore, a heterograft study by Miao et al. (2021) revealed that the correct sugar content is essential for graft union formation and plays a positive role in this process (Melnyk, 2017; Miao et al., 2021). The establishment of a vascular connection between the scion and the rootstock is crucial for the successful resumption of growth in the scion. Similarly, the re‐establishment of the vascular connection, facilitated by the formation of new xylem and phloem, is a critical stage in the process of new shoot growth from buds located on the scion (Habibi et al., 2022). Recent research by Yang et al. (2023) has revealed a transgene‐free and heritable approach for incorporating targeted mutagenesis in plants through grafting. Their study demonstrates the mobility of Cas9 and single guide RNA (sgRNA) transcripts when fused with tRNA‐like sequence (TLS) motifs across the grafted junction from transgenic rootstock to wild‐type scion. This technique has the potential to be applied in various breeding programs and crop plants (Awan et al., 2023; Yang et al., 2023). The analysis of gene expression to identify genes involved in different aspects of graft union formation poses challenges due to the heterogeneous and complex nature of the graft interface. This interface consists of different cell types with varying responses, making it difficult to pinpoint the specific cells involved in vascular reconnection. For instance, cells involved in vascular reconnection may be sparsely distributed among other tissues present at the graft interface. To overcome these challenges, new techniques can be employed to study grafting and elucidate the roles of each tissue. One such technique is in vitro callus grafting, which allows for the examination of plasmodesmata formation at the callus graft interface. Additionally, single‐cell transcript profiling can provide valuable insights into the gene expression patterns of individual cells at the graft interface (Loupit et al., 2023). MECHANIZED GRAFTING AND COMMERCIAL APPLICATION Grafting is used as an easy approach for mitigating abiotic stresses (Pérez‐Alfocea, 2019; Singh et al., 2017) but is a tedious process. Thus, the use of automated machines or robots (Kubota et al., 2008; Xie et al., 2020) for grafting is being developed (Oyebamiji et al., 2024; Rivero et al., 2003). A vegetable grafting robot is a device that can be specifically programmed by a computer and is capable of performing an intricate sequence of tasks autonomously. These robots are steered by an internal control system or by an external control device. The majority of crop robotics research now focuses on horticultural or industrial crops (Singh, Sethi et al. 2020). Figure 3 illustrates the schematic diagram emphasizing on the importance of mechanized grafting in vegetable farming. Schematic diagram of mechanization of grafting, depicting several benefits of using agri‐bot for grafting. Grafting automation has been recognized as a key to success in the large‐scale production of grafted seedlings. The high cost of grafted seedlings is due to intensive labor inputs for propagation using traditional grafting methods, longer production periods, and additional costs of rootstock seed (Singh, Sethi et al. 2020). Vegetable grafting robots rely heavily on machine vision technology since it increases grafting operations' efficiency and success rate (Devi et al., 2020). The introduction of automation and mechanization technology can help to address large‐scale production needs. Semi and fully automated grafting robots have been presented from different agricultural machine industries (Devi et al., 2020; Yan et al., 2022). It assists with joint surface deviation detection, gap detection between rootstock and scion, and diameter matching and identification of seedlings. Intelligent grafting robots that improve accuracy and efficiency can be produced by combining machine vision technology with artificial intelligence and large data analysis (Jiang et al., 2022; Zhang et al., 2017). To determine surface parameters and cutting angles for precise cutting and grafting, it examines the morphology and structure of seedlings. Classification algorithms and statistical techniques aid in the accurate measurement of seedling size (Lee et al., 2010; Liang et al., 2023). One of the mechanized grafting technique is full‐tray grafting that is achieved by plug seedlings clamping and positioning devices. Fu et al. (2022) showed that the average grafting success rate achieved by the full‐tray grafting device was around 67%. Moreover, the success rate of rootstock cutting was 100%, while that of scion seedling cutting was over 88%. These findings of Fu et al. (2022) suggest that although the full‐tray grafting device exhibited stable performance, there is still scope for enhancing the grafting success rate, especially for seedlings with thin stems and curved growth. The research carried out by Jiang et al. (2020) addresses the need for a cutting mechanism to guarantee the standard and rate of survival of grafting seedlings and offers a reliable procedure for grafting robots. The rootstock and scion cutting surfaces' fitting rates reached 99.04%, indicating the critical cutting angles for C. moschata and calabash gourd seedlings. Cutting C. moschata seedlings had a success rate of 98%, and pressing their cotyledons (embryonic leaf and critical to handle during grafting) had a 96.67% success rate. The rootstock and scion's cutting precision and fitting rate complied with the splice grafting method's requirements. Hence, these research outcomes serve as supportive shreds of evidence for switching grafting automation over conventional or human‐intervened grafting practices. Table 2 lists the most recently developed grafting machines or research related to mechanized grafting and type of grafting that can be achieved. TABLE 2A summary on the designs and optimization researches carried out on the automatic grafting robots.S. noModel type/study onType of graftingTarget cropGrafting rate (plants/hour)Success rateDeveloped byCountryYearReference1Automatic; 2TJGQ‐800One‐cotyledon graftingWatermelon77490.07Not specifiedChina2023Liang et al. (2023)2Semi‐automatic machineSplice graftingMelon213467Not specifiedChina2022Fu et al. (2022 ) 3Automatic; clip – Feeding mechanismNot specifiedNot specifiedNot specified98.67Research Center of Intelligent Equipment, Beijing Academy of Agriculture and Forestry Sciences, and NERCITABeijing, China.2022Jiang et al. (2022 ) 4Cutting mechanical propertiesNot specifiedPumpkin30,00095Institute of Agricultural Facilities and EquipmentChina2022Lu et al. (2022 ) 5Automatic; HAU‐22Splice graftingMelon213467Huazhong Agricultural UniversityChina2022Yan et al. (2022 ) 6Semi‐automatic machineNot specifiedSolanaceae, Cucurbitaceae80087.3NAHEP‐CAAST‐DFSRDA‐VNMKVParbhani, India2021Liang et al. (2023)7Semi‐automatic; JFT‐A1500TNot specifiedMelon and Solanaceae150098Hefei Jiafute Robot Technology Co., LtdChina2021Yan et al. (2022 ) 8Cutting mechanismSplice graftingCucurbitsNot specified98Beijing Research Center of Intelligent Equipment for Agriculture and the Beijing Research Center of Information Technology for AgricultureChina2020Jiang et al. (2020)9Rootstock cutting mechanismSplice grafting Cucurbita moschata and calabash gourdNot specified Cutting success rate: 98% Cutting accuracy: 96.8% Beijing Research Center of Intelligent Equipment for AgricultureChina2020Jiang et al. (2020 ) 10High‐productivity grafting robot (HPR)—two operator modeSimultaneous multi‐plant graftingSolanaceae225093.6South China Agricultural University, GuangzhouChina2020Xie et al. (2020 ) 11High‐productivity grafting robot (HPR)—one operator modeSimultaneous multi‐plantSolanaceae154290.8South China Agricultural University, GuangzhouChina2020Xie et al. (2020 ) 12Agilus model R6 900—seedling handlingSplice graftingTomatoNot specified99KUKA RoboterSpain2020Pardo‐Alonso et al. (2020 ) 13Semi‐automatic; R6 900Splice graftingTomato80–30090University of Almería, Research Center CIMEDESItaly2019Pardo‐Alonso et al. (2019 ) 142TJGQ‐800 semi‐automatic grafting machineSplice graftingMelon80095Intelligent Equipment Technology Research Center of Beijing Academy of Agricultural and Forestry Sciences, ChinaChina2018Chen et al. (2024 ) 15Automatic; JS‐6Cleft graftingSolanaceae72096Qingdao Agricultural University and Shandong Zhongtianshengke Automation Equipment Co., Ltd.China2018Yan et al. (2022 ) 16Fully automatic; image recognition techniqueSplice graftingCucumberNot specified96National Institute of Agricultural Sciences, WanjuKorea2017Kang et al. (2019 ) 17Fully automatic; image recognition techniqueSplice graftingTomatoNot specified95National Institute of Agricultural Sciences, WanjuKorea2017Kang et al. (2019 ) 18Semi‐automatic; cutting angleSplice graftingTomatoNot specified85Tenova Technological Center: Foundation for Auxiliary Technologies for Agriculture in AlmeríaSpain2017Pardo‐Alonso et al. (2018 ) 19AFGR‐800CS; semi‐automaticSplice graftingMelon80095Helper Robotech Co., Ltd., South KoreaSouth Korea2016Chen et al. (2024 ) 20Automatic; fruit grafting machineCleft graftingPassion fruit200>90Chiayi University, TCDARESTaiwan2016Lin et al. (2016 ) 21Automatic; prototypeSplice graftingSolanaceae/Cucurbitaceae840>90Israel VirentesIsrael2016Lin et al. (2016 ) 22Automatic; GR600C‐SSplice graftingSolanaceae/CucurbitaceaeNot specified>90Korea Helper RobotechKorea2016Lin et al. (2016 ) 23Automatic; 2JC‐600BTop plug‐in/insertion graftingCucurbitaceae600>90Northeast Agricultural UniversityChina2016Lin et al. (2016 ) 24Automatic; 2JC‐1000BTop plug‐in/insertion graftingCucurbitaceae1125>90South China Agricultural UniversityChina2016Lin et al. (2016 ) 25Semi‐automatic; ISO‐Graft 1100Vertical cut/tube graftingMelon/Solanaceae100098Netherlands ISO‐GroupNetherland2014Lin et al. (2016 ) 26Automatic; AFGR‐800CSApproach graftingSolanaceae80095Helper RobotechKorea2013Yan et al. (2022 ) 27Automatic; GRF800‐USplice graftingCucurbitaceae80095ISEKI, JapanJapan2011Lin et al. (2016 ) 28GR803‐USplice graftingMelon80095ISEKI Co., Ltd., JapanJapan2010Chen et al. (2024 ) 29Automatic; tubing‐grafting robotic systemSplice grafting Tomato (S) Eggplant (R) 32792–97National Ilan, Taiwan University, and TNDARESTaiwan2010Lin et al. (2016 ) 30Semi‐automatic; ISO‐Graft 1200Vertical cut/tube graftingMelon/Solanaceae105099Netherlands ISO‐GroupNetherland2010Lin et al. (2016 ) 31Semi‐automatic; ISO‐Graft 1000Vertical cut/tube graftingTomato100099Netherlands ISO‐GroupNetherland2007Lin et al. (2016 ) 322JSZ‐600 semi‐automatic grafting machineNot specifiedMelon60095China Agricultural University, ChinaChina2005Chen et al. (2024 ) 33AutomaticPin graftingSolanaceae120095Ideal SystemKorea2004Yan et al. (2022 ) 34AutomaticPlug‐in methodEggplantNot specifiedNot specifiedK. Manzawa, H. Saito, Y. Irie, and T. MitaniJapan1992Kurata (1994 ) 35GR300/3 semi‐automatic grafting machineSplice graftingMelon30098Atlantic Man., ItalyItaly‐Chen et al. (2024 ) A summary on the designs and optimization researches carried out on the automatic grafting robots. Cutting success rate: 98% Cutting accuracy: 96.8% Tomato (S) Eggplant (R) From the “One Cotyledon Splice Grafting” device developed by Iam Brain in Japan in the 1980s to the sophisticated research in agribots (Singh et al., 2023), a number of factors influence the success rate, one of which is the seedlings' uniform and homogeneous growth in the vertical direction. Adoption of automated grafting is hindered by the high initial cost of grafting equipment, the stringent requirement for consistency of rootstock seedlings, and the intricacy of the cutting angle when utilizing the one‐cotyledon grafting method (Devi et al., 2020). Current problems include high production costs, limited grafting speed, and a lack of supplementary grafting equipment. In the future, these limitations in the recent study can be further examined. Automation and intelligence are the directions for future progress. Modern intelligent technologies like artificial intelligence, cloud computing, and machine vision may be used to accomplish fully autonomous grafting, as well as lower manufacturing costs, faster grafting, and better grafting auxiliary equipment (Yan et al., 2022; Zhang et al., 2017). We might witness the creation of increasingly advanced agribots that can handle a variety of vegetable crops as technology advances. These systems could be adjusted to various grafting methods and maximize the procedure's overall effectiveness. The efficacy and flexibility of agribots in grafting may be further improved by integrating artificial intelligence and machine learning. For widespread implementation, nevertheless, issues including cost, upkeep, and adaptability to various agricultural contexts must be resolved. Agribots' future will probably be shaped by ongoing research and development in this area, making them useful instruments for enhancing sustainability and productivity in vegetable crop grafting. CONCLUSIONS The selection of suitable rootstocks or scions is crucial in generating the abiotic stress resistance of grafted plants. Besides enabling the grafted plants to regulate general morphological, physiological, and molecular processes and allow adaptive changes to improve abiotic stress resistance, the graft‐responsive genes, especially through the exchange of genetic information between rootstocks and scions, are important in improving plant performance under stress conditions. It is also vital in promoting water use efficiency, osmoregulation, antioxidant‐mediated stress tolerance, and so forth. Furthermore, future research can focus more on the improvement of abiotic stress resistance of grafted crops, which is a potential research avenue that can be applied in tropical and sub‐tropical regions. Furthermore, with a deeper study, we anticipate that scion‐rootstock communication is a complicated process that is critical for improving abiotic stress resistance through transport molecules. As a result, understanding and enhancing plant tolerance requires a focus on scion‐rootstock communication. Researchers from several nations have conducted extensive studies on vegetable grafting robots, in addition to physiochemical and molecular biology studies. A huge number of valuable successes have been gained as they progressed from semi‐automation to full automation, and the grafting speed and survival rate have been significantly enhanced. Given the advancements in fields like agricultural science and mechanical design, modern vegetable grafting robots based on the splice grafting method are better suited to the development of automation and computerization, which are the mainstream and development directions of future research. With the ongoing advancement of information technology and the progressive implementation of cloud computing and big data in agriculture, the development of intelligent agricultural systems has emerged as the overarching path of future growth. At the same time, using contemporary artificial intelligence, big data, and cloud computing approaches, it is a significant task and challenge to create an agronomic and mechanism‐based design model for vegetable grafting robots. AUTHOR CONTRIBUTIONS Kaukab Razi and Preethika Suresh wrote the original draft of the manuscript; Pritam Paramguru Mahapatra, Ajila Venkat, and Musa Al Murad contributed in drafting few sections of manuscripts; Michitaka Notaguchi and Muthu Arjuna Samy Prakash gave suggestions while drafting and finalizing the manuscript; Sowbiya Muneer edited and finalized the manuscript. All authors approved and contributed to publish this review. CONFLICT OF INTEREST STATEMENT The authors did not report any conflict of interest. Supporting information Data S1. Peer review. ACKNOWLEDGMENTS Authors would like thank VIT‐International Fund scheme (award number: VIN/2023‐2024/03) (a collaborative bilateral project between Vellore Institute of Technology, Vellore and Kyoto University, Kyoto) for funding the project. Razi, K. , Suresh, P. , Mahapatra, P. P. , Al Murad, M. , Venkat, A. , Notaguchi, M. , Bae, D. W. , Prakash, M. A. S. , & Muneer, S. (2024). Exploring the role of grafting in abiotic stress management: Contemporary insights and automation trends. Plant Direct, 8(12), e70021. 10.1002/pld3.70021 Kaukab Razi and Preethika Suresh contributed to this work equally. DATA AVAILABILITY STATEMENT All data will be made available upon request to the corresponding author. REFERENCES Associated Data Supplementary Materials Data S1. Peer review. Data Availability Statement All data will be made available upon request to the corresponding author.