Dynamics of Nanomotors Propelled by Enzyme Cascade Reactions Authors: Jia-Qi Hu, Rui Zhao, Ru-Fei Cui, Jian-Long Kou, Jiang-Xing Chen Published: 2025 ABSTRACT Enzyme-powered nanomotors have attracted significant attention in materials science and biomedicine for their biocompatibility, versatility, and the use of biofuels in biological environments. Here, we employ a hybrid mesoscale method combining molecular dynamics and multi-particle collision dynamics (MD–MPC) to study the dynamics of nanomotors powered by enzyme reactions. Two cascade enzymes are constructed to be layered on the same surface of a Janus colloid, providing a confined space that greatly enhances reaction efficiency. Simulations indicate that such a configuration significantly improves the utilization of intermediate products and, consequently, increases the self-propulsion of the Janus motor. By presenting the gradient fields of substrates and products, as well as the hydrodynamics surrounding the motor, we explore the underlying mechanism behind the enhanced autonomous velocity. Additionally, we discuss the improvements in environmental safety of the modified motor, which may shed light on the fabrication of biocatalytic nano-machines in experiments. 1. Introduction Enzyme-powered micro- and nanomotors harness reactions to catalyze various substrate fuels (such as glucose, hydrogen peroxide, urea) and convert chemical energy into mechanical energy, thereby achieving self-propulsion and directional movement [1,2,3,4,5,6,7,8]. Compared to traditional inorganic micro- and nanomotors, enzyme-powered versions not only offer the advantage of autonomous, rapid directional motion but also exhibit biocompatibility, biodegradability, and lower toxicity. These characteristics make such small motors promising for a wide range of applications, including the synthesis of nanomaterials, microelectronics fabrication, and biosensing [9,10,11,12,13,14]. Ma et al. studied single enzyme-powered micro/nanomotors [15]. Patiño et al. investigated the dynamics of non-Janus particles with an asymmetric enzyme distribution on the motor surface [16]. Various other configurations of enzyme motors, including tubular, rod-like, shell-like, flask-like, and stomatocytes, have also been studied recently [17,18,19,20,21]. Recent developing research has shown that the use of multiple enzyme-powered systems provides multiple driving forces, which is expected as a promising approach to enhancing propulsion and environmental safety. Various enzymes can independently catalyze corresponding substrates simultaneously, providing multiple sources of propulsion and enabling diverse functions. For example, glucose oxidase ( GOx ) and trypsin can utilize glucose and peptides, respectively, as their biofuels to jointly drive the movement of Janus swimmers [22]. Many other similar examples have been successfully implemented in previous experiments [23,24,25,26]. Unlike the dependence of multi-enzyme systems on various substrate sources, enzyme cascade reactions (ECRs) require only a single substrate source to propel motor motion in a multi-step manner [27,28,29,30]. For instance, by co-modifying the motor surface with GOx and catalase ( Cat ), GOx catalyzes the decomposition of glucose to drive the motor, while the intermediate product hydrogen peroxide ( H2O2 ) serves as a substrate fuel for Cat , further providing driving energy [27,31,32]. Using this ECRs, Lin et al. presented a generally efficient approach to facilitating the targeted delivery of nanoagents for the effective management of diabetic wounds by utilizing wound heterogeneity [33]. Recent studies have also explored other ECRs, such as Cat and horseradish peroxidase ( HRP ), GOx and bilirubin oxidase ( BOD ), and HRP and cytochrome c ( Cyt c ) [29,34,35]. This type of motor enhances the operability and safety of colloidal motors in biomedical applications. In this study, we propose a new configuration of self-propelled motors by layering additional enzymes on the surface of Janus spheres to form ECRs. We investigate the effects of ECRs on the self-propulsion of the motor. Furthermore, the influence of substrate and intermediate product concentration distributions is analyzed, along with the fluid flow surrounding the motor. The distinctive characteristics of this configuration are presented, and the autonomous swimming behavior by self-diffusiophoresis is explored. 2. Results and Discussion Our investigations of motor dynamics propelled by ECRs use a coarse-grain microscopic description of the entire system. We consider a colloid with two types of enzymes coated on its surface. One of the enzymes E0 is inert, while the other, enzyme E1 (mimicking GOx ), catalyzes the fuel A (mimicking glucose) into an intermediate product I (mimicking H2O2 ). Such Janus colloid has been fabricated in recent experiments. In addition, we construct a special structure by grafting another enzyme, E2 (mimicking Cat ), onto the outer layer of E1 , which catalyzes the intermediate product I into the final product B (mimicking O2 ). A schematic diagram of the motor configuration is presented in Figure 1. The nanomotor is operated by a diffusiophoretic mechanism where the ECRs on the active enzymes produce concentration gradients that drive propulsion. The solution in which the motor moves contains fuel A as well as products I and B particles. These species interact with the motor through intermolecular potentials and determine how the motors move in the presence of chemical gradients produced by the motors themselves. Additional information concerning the motor configuration and the simulation is given in the Section 3. When fuel particles A diffuse into the reaction zone of enzyme E1 , they are converted into intermediate particles I under the catalytic effect, creating an asymmetric distribution of A and I particles around the Janus colloid, which account for the self-propulsion due to the inequality of the interaction energies ( ϵAβ<ϵBβ ). We define the unit vector u^ from the center of mass of the E1 hemisphere to that of the E0 hemisphere, as illustrated by the arrow in Figure 1. The average velocity Vu along this axis can be calculated by Vu=Vt⋅u^ , where Vt represents the instantaneous velocity of the colloid’s center of mass, and the brackets denote a time average. Figure 2a shows the probability distribution of Vu , indicating that the velocity along u^ is approximately Vu0=0.0029 . In previous experiments, the GOx -coated Janus displayed similar behavior [36,37]. Subsequently, the intermediate product I diffuses to the nearby layer composed of enzymes E2 , where the second reaction produces B particles. At this point, E1 and E2 constitute an enzyme cascade reaction (ECR). The second stage of the reaction creates a gradient of B particles around the motor as well as the E2 layer. Due to the different interactions of B particles with E2 ( ϵBE2<ϵαE2 ), the resulting asymmetrical gradient fields contribute to additional propulsion along the u^ direction, as shown in Figure 2a. The influence of the area percentage of enzyme E2 ( ϕ ) occupying the second layer on the self-propulsion velocity is investigated. At low ϕ values, Vu increases slowly with increasing ϕ ; however, as ϕ approaches 0.5, Vu grows rapidly. As shown in Figure 2a, Vu reaches 0.0069 at ϕ=0.8 , indicating an increase of nearly 2.4 times compared to motors without cascade enzyme E2 ( Vu0=0.0029 ). Figure 2b further demonstrates that at ϕ=1.0 , Vu is approximately five times greater than that with ϕ=0 . This shows a significant enhancement in the enzymatic cascade efficiency as more enzyme E2 is introduced. This phenomenon can be rationalized as follows: Initially, the increase in motor velocity is modest because, as ϕ increases, the overall mass of the motor also increases, which in turn raises the drag force on the motor. Furthermore, when ϕ is small, the number of B particles produced is low, and the intermediate I particles diffuse away without being blocked by the second layer. Consequently, a weaker concentration gradient around the motor results in slower velocity growth. As ϕ increases, the concentration of I particles near enzyme E1 becomes more confined by the second layer of E2 , which prevents their diffusing away and gives rise to a stronger concentration gradient. This increases the efficiency of the enzymatic cascade, leading to higher propulsion arising from the self-diffusiophoretic mechanism. The value of R2 also affects the self-propelled velocity. In Figure 2b, we compare the effects of placing enzyme E2 at the following three different positions: R2=3.95, 4.2, and 4.35 . The results indicate that, at these different radii, Vu varies with ϕ at the same scaling rate, following the power law, Vu∼ϕ4 . Notably, for the same ϕ , a smaller R2 results in a faster Vu . Through curve fitting, we obtain the following relationship: (1) Vu=AR2ϕ4+Vu0, where AR2=a−bR2 , with a=5.05×10−2 and b=0.98×10−2 . This relationship shows that as ϕ increases, Vu rises more rapidly, highlighting the essential role of ECRs within this motor structure. Additionally, we found that as R2 decreases, the E2 layer is closer to the hemisphere coated by E1 , facilitating the occurrence of an ECR. A similar phenomenon has been observed in previous experiments, where decreasing the distance between enzyme pairs ( GOx and HRP ) on DNA nanostructures resulted in enhanced activity [38,39]. In addition to enhancing self-propulsion, minimizing the toxic effects of intermediate products is a crucial factor in ECRs. This is particularly relevant in the widely studied GOx and Cat systems, where hydrogen peroxide ( H2O2 ) poses serious toxicity to cells, making it necessary to reduce its concentration in the solution. To provide insight into the motion mechanism and toxic effects arising from the asymmetric product distribution in this configuration, we perform a detailed analysis of the molecular concentration fields surrounding the motor. Figure 3 presents the radial distribution of the concentration field around the Janus motor. In Figure 3a, when ϕ is low ( ϕ=0.1 ), the concentration of particle A decreases near the motor due to the conversion reaction A →I . Consequently, a strong concentration gradient for particle I is observed in Figure 3b, which generates the propulsion force for the motor via this first enzymatic reaction. In this case, particles I can diffuse over considerable distances far from the motor. However, as a consequence, on one hand, the intermediate products are not effectively utilized, while on the other hand, their escape into the surrounding environment may result in toxic effects. As ϕ increases, the second enzymatic reaction becomes significant. In Figure 3a, we observe a growing concentration difference in particle A on both sides of enzyme E2 . It is evident that at ϕ=0.8 , the dip in the concentration curve for particle A becomes pronounced. In the space between enzymes E1 and E2 , the concentration of I decreases quickly due to the reaction I →B as ϕ increases. Correspondingly, the concentration of particle B rises sharply, providing a robust propulsion force for the second reaction. This force stems from the concentration gradient of particle B around E2 , as illustrated in Figure 3c, where the concentration difference is more evident at both ends of the dip. Furthermore, particle I not only fuels the second enzymatic reaction but also experiences a rapid decline in concentration outside enzyme E2 ( r>R2+σ2 ) as ϕ increases, as seen in Figure 3b. When ϕ=0.8 , the concentration CBr approaches zero, indicating that particle I is effectively utilized and thus preventing the escape of toxic intermediate products. Aside from the radial distribution, the angular concentration distribution of the solvent particles around the motor provides an additional understanding of the propulsion mechanism and the origin of the increased velocity. Next, we analyze the angular concentration distribution Cαr ( α=A, I, B ) within a spherical shell with a radius range of 3.2ϵAE0=ϵAE1>ϵBE2 , to simulate the self-propulsion of the motor based on self-diffusiophoresis. In molecular dynamics (MD) with a time interval τMD , particle motion is executed by the velocity Verlet algorithm, which numerically integrates Newton’s equations of motion. The ECRs are considered at each MD time. A multiparticle collision (MPC) dynamics step is performed after 100 MD steps. During the MPC step, solvent particle interactions are governed by collision [45,46]. They are assigned to a lattice with cell size a0 . Independent multi-particle collision processes then occur in each cell, where solvent particles within a given cell undergo velocity changes due to the random rotational collision rule. The post-collision velocity for the i -th particle in cell ξ is updated as follows [45,46]: (7) Vit+tMPC=Vcmt+ω^ξθvit−vcmt, where ω^ξθ represents the rotation matrix, and Vcmt is the center-of-mass velocity of cell ξ . Periodic boundary conditions are applied along the x , y , and z directions. The system evolves iteratively through alternating MD and MPC steps. MPC–MD dynamics is microcanonical and preserves the basic conservation laws, such as conserving mass, momentum, and energy, as well as phase space volumes. Therefore, hydrodynamic interactions are properly taken into account and no additional assumptions about friction coefficients or random forces need to be made. Thermal fluctuations in low Reynolds number environments are considered when simulating dynamics of nanomotor [45]. In our simulations, all quantities are reported in dimensionless units based on the energy ε , mass ms , and distance a0 parameters, as follows: tmsa02/ε1/2→t , r/a0→r , and kBT/ε→T . The system temperature T is set to 16 . The diffusion coefficient of the substrate molecules D=0.0899 according to the relation D=kBTtMPC2ms3nsns−1+e−ns1−cosφ−1 [45]. The initial density of solvent particles is ns=20 . A rotation angle of φ=π2 and a collision time interval of tMPC=0.5 are employed. Additional simulation parameters are as follows: Lx=Ly=Lz=30 ; Nin=2681 ; min=0.44 ; mout=1.50 ; m2=0.64 ; ϵAE0=ϵAE1=0.2 ; ϵIβ=ϵBE0=ϵBE1=ϵAE2=5.0 ; ϵBE2=0.1 ; tMD=0.005 ; spring constant ks=60 ; and fluid rate constants kbB=kbI=0.001 . To ensure Galilean invariance, grid shifting is applied within the MPC method. 4. Conclusions Strong propulsion and safety are central concerns in the design of self-propelled micro- and nanomotors. ECR-powered small motors are considered as a viable solution to achieve these goals. We propose a motor configuration that exhibits both strong power and enhanced safety features. By modifying Janus spheres with two layers of enzymes to facilitate ECRs, this configuration presents interesting advantages. On one hand, this configuration, distinct from the traditional enzyme modification methods, increases the available surface area for enzyme attachment, thereby enhancing the propulsion force. Through the cooperative effects of secondary enzymes, the propulsion of both the primary and secondary enzymes are enhanced, thereby effectively increasing the overall force. Furthermore, this structure efficiently prevents the escape of intermediate products, significantly improving safety. Simulations reveal that the velocity increases rapidly with the density of enzyme E2 , following a relationship of Vu∼ϕ4 . Through analyzing the radial and angular concentration fields around the motor, the study sheds light on the underlying mechanisms behind the enhanced propulsion and safety. Additionally, the contribution of the fluid field to the velocity is explored. Our design provides a basic model for further studies and experiments. Small motors powered by ECRs have been applied in various potential fields, demonstrating multiple functions. Among these, motion-based diagnostics and therapeutics are an important direction. For example, GOx and HRP enzymes can detect dynamic changes in intracellular glucose concentration at low levels [28], while diamine oxidase ( DAO ) and Cat enzymes can be used for the immune therapy of diseases targeting histamine [47]. Our results capture the main kinetics of ECRs motor. Furthermore, this novel configuration can contribute to the design of ECR-powered motors with more efficient propulsion and safer biocompatibility.