Cross-Electrophile Coupling: Principles, Methods, and Applications in Synthesis Authors: Lauren E. Ehehalt, Omar M. Beleh, Isabella C. Priest, Julianna M. Mouat, Alyssa K. Olszewski, Benjamin N. Ahern, Alexandro R. Cruz, Benjamin K. Chi, Anthony J. Castro, Kai Kang, Jiang Wang, Daniel J. Weix Published: 2024 ABSTRACT Cross-electrophile coupling (XEC), defined by us as the cross-coupling of two different σ-electrophiles that is driven by catalyst reduction, has seen rapid progression in recent years. As such, this review aims to summarize the field from its beginnings up until mid-2023 and to provide comprehensive coverage on synthetic methods and current state of mechanistic understanding. Chapters are split by type of bond formed, which include C(sp3)–C(sp3), C(sp2)–C(sp2), C(sp2)–C(sp3), and C(sp2)–C(sp) bond formation. Additional chapters include alkene difunctionalization, alkyne difunctionalization, and formation of carbon-heteroatom bonds. Each chapter is generally organized with an initial summary of mechanisms followed by detailed figures and notes on methodological developments and ending with application notes in synthesis. While XEC is becoming an increasingly utilized approach in synthesis, its early stage of development means that optimal catalysts, ligands, additives, and reductants are still in flux. This review has collected data on these and various other aspects of the reactions to capture the state of the field. Finally, the data collected on the papers in this review is offered as Supporting Information for readers. Introduction C–C bond formation is central to organic synthesis and metal-catalyzed methods to form new C–C σ-bonds have revolutionized the way molecules are made.1−8 For example, Pd-catalyzed cross-coupling reactions are the most-used C–C bond-forming reactions in medicinal chemistry and process chemistry.9−12 The importance of this class of reactions was acknowledged in the awarding of the 2010 Nobel Prize in Chemistry13 to Richard Heck, Ei-ichi Negishi, and Akira Suzuki “for palladium-catalyzed cross-couplings in organic synthesis.” Despite major advances in the synthesis and application of organometallic reagents, it is still the case that preformed carbon nucleophiles can be limiting for scope and substrate availability. The field of C–H functionalization addresses these shortcomings by utilizing the ubiquitous C–H bond as a carbon-nucleophile equivalent, in principle broadening the potential substrate scope to all possible molecules.14 This field is still in its early stages, but challenges relating to reactivity and selectivity for one C–H bond out of many remain.14 An approach that allows access to a broad substrate pool while also avoiding issues of site-selectivity could offer a fruitful middle ground for synthesis (Figure 1). Cross-Coupling vs C–H Arylation/Alkylation vs Cross-Electrophile Coupling. Cross-electrophile coupling (XEC or sometimes CEC), the cross-coupling of two different σ-electrophiles that is driven by catalyst reduction, can address both of these outstanding challenges (Figure 2).15 In this work, we differentiate ‘cross-electrophile coupling’ from the broader field of reductive coupling, which includes a wide variety of net-reductive reactions, including those that use nucleophilic hydride sources, homodimerize electrophiles, and hydrofunctionalize π-electrophiles. A key consideration was avoiding renaming reaction classes that already have developed nomenclature. This rules out processes where two known, distinct reactions are happening concurrently, such as direct insertion of Zn metal into Ar–X to form Ar–ZnX with concurrent Negishi coupling.16 It also rules out reactions that do not involve a metal catalyst, such as reduction of one electrophile to form a nucleophile that reacts with a second electrophile.17−19 In contrast, XEC reactions could involve organometallic intermediates (e.g., ZnX2 mediated transfer of aryl groups from Ni to Pd).20 For reactions that start with two electrophiles, but do not fit the mechanistic definition of XEC, we propose the term “formal XEC” in analogy to its use in “formal [4 + 2] reaction.” Formal XEC reactions are just as useful as XEC reactions, but are not covered in this review. We also include here reactions that add the two electrophiles across a π-system, even if it is the same electrophile added twice. These reactions figure prominently in the field, for both mechanistic and synthetic reasons, and there is a high degree of overlap in conditions and catalysts. Definition and key attributes of cross-electrophile coupling. A key attraction for XEC is the broader commercial availability of electrophiles compared to carbon nucleophiles (Figure 3). Over the years, analysis of both compounds reported in the published literature and compounds listed for sale have shown the same trends depicted in these figures, even if the exact numbers change. The key takeaway is that even organic iodides, the least available carbon σ-electrophile class in the table, are more abundant than organoboron reagents, the most abundant carbon nucleophile class. It is interesting to note that aldehydes, a key electrophile for Grignard reactions and aldol chemistry, are only on the level of organic iodides with respect to availability. The broader commercial availability of electrophiles increases the chemical space that is accessible in a given number of steps and the mild reductive conditions are compatible with many sensitive functional groups. A broad goal for the field of XEC is finding approaches to accomplish general couplings with the largest substrate pools. As such, each subsection was organized by coupling partner. Chart of electrophile substrate availability for (A) Ar–X coupling partners, and (B) alkyl–X coupling partners utilizing data gathered from REAXYS and eMolecules on April 8, 2019. Initial reports on cross-electrophile coupling built upon reductive homodimerization reactions of aryl, alkyl, and allylic electrophiles, the development of methods to turnover catalysts with terminal reductants, and stoichiometric organometallic reactions.21−30 These seminal studies were concurrent with the major developments in cross-coupling of carbon-based nucleophiles with electrophiles, but XEC chemistry was slower to develop. In our view this was due to the challenges in studying first-row metals (that are most common for XEC) and in achieving cross-selective reactions.25,26,28 In the past 15 years, however, the field has rapidly progressed: 75% of all publications in this Review were reported only in the past six years (Figure 4). The cross-electrophile coupling concept can be applied to a wide array of potential bond-formations and many new methods take advantage of the unique features of XEC. These numbers have also included an increasing number of applications to complex molecules and drug candidates as well as a continued refinement of our understanding of the mechanisms of these reactions. Distribution of publications covered in this review by year of publication showing the recent surge of activity. Note: publications in this review range until mid-2023. Light pink section denotes publications in 2023 not covered in this review. This review aims to summarize the field up until May 1, 2023 in a comprehensive manner to facilitate further uptake and expansion. Considerable effort was put into collating data that could be useful to both the novice and the expert, including surveys on ligands, solvents, classes of reactions, and mechanisms. This data was used to discuss trends throughout the manuscript and is supplied as a Supporting Information file to this review. Global Trends We sought to quantify trends in the field of XEC, both as a way of highlighting similarities between approaches and to determine areas for further improvement in the field. Taking inspiration from an excellent recent review by Louie and co-workers on bidentate phosphines in nickel catalysis,31 we elected to generate a number of charts with this data. We hope that this data will serve as a starting point for researchers attempting to quickly survey potential reaction conditions for a desired XEC transformation, as well as for researchers wishing to look at unexplored areas. For example, as can be seen in Figure 5, 55% of this review is comprised of C(sp2)–C(sp3) bond forming reaction reports, in stark contrast to C(spn)–C(sp) bond forming reactions, which are only 1.8%. While this data highlights the wide array of bonds that can be formed via XEC, as well as highlights further areas to be explored, it is by no means comprehensive because the field continues to develop rapidly. Indeed, the data collected from sections with fewer reports (e.g., C–X, C(sp2)–C(sp)) could be misleading because the charts arise from a small number of reports. Thus, while the data here is a good starting point, the absence of a reagent, catalyst, or condition should not be viewed as disqualifying. XEC reactions covered in this review categorized by type of bond formation. Ligands While there have been a variety of ligand classes explored in XEC reactions, undoubtedly the most utilized are bipyridines, representing around one-third of all ligands used, and N-bound ligands comprise approximately 85% of all ligands employed (Figure 6, Figure 7, and Figure 8). Bidentate phosphines have been shown in several examples as successful ligands in Ni-catalyzed XEC but are most frequently seen bound to other transition metal precatalysts, either in multimetallic XEC or non-Ni-catalyzed XEC. Cobalt catalysts seem to work equally well with phosphine and nitrogen ligands, although this data is from a small number of papers. Distribution of ligand classes in this review. Total = 674 reports. Other = ligand classes with <10 reports, such as C(NHC) or O (acetate). There are some mixed ligand systems or reports where two different ligands are employed, and some reports are “ligandless” where the ligand is either solvent or the substrate. Denticity of ligands reported in this review. Other = tetradentate, η-binding. Ligand structures reported in this review. Total = 674 reports. Bidentate ligands are the most used, representing 79% of all ligands used, but this hides trends for certain pairs of coupling partners. For example, monodentate ligands (pyridine) and tridentate ligands (terpyridine, bpp) work better for tertiary alkyl coupling with aryl halides than bidentate ligands. Tridentate ligands seem to be superior for C(sp3)–C(sp3) bond forming reactions. These localized trends are evident in each subsection. When ligand substructures are examined, the reliance of XEC on just a few classes can be seen clearly: bipyridine, phenanthroline, and terpyridine classes represent 62% of all ligands used in XEC, and the structural diversity in these classes is relatively low, compared to phosphines. Newer ligands, such as carboxamidines (PyCam, PyBCam)32,33 are becoming more common and are now commercially available, but more new classes of ligands would be a great benefit to the field. Finally, enantioselective reactions are dominated by BiOx, PyOx, and BOX ligands with a few bidentate phosphine examples. Here, too, additional classes of ligands would be advantageous. Solvents Currently, amide solvents predominate reported XEC reactions, with DMA and DMF accounting for approximately 50% of all reaction solvents (Figure 9). Although these solvents are useful on very small scales because of their high boiling points and general ability to solubilize molecules and metal salts, on large scale these solvents are problematic for health and safety reasons. Advances have been made in recent years to develop XEC reactions in nonamide solvents.34−36 XEC reactions have also been reported with a variety of mixed-solvent systems; however, similar to their single solvent system analogues, mixed solvent systems with amides dominate heavily, representing 75% of all mixed solvent systems. Among these, unsurprisingly, amide/ether solvent systems represent 39% of all mixed solvent systems, paralleling the two largest solvent classes under single solvent conditions. Distribution of solvent types used in XEC. Other = solvents with <10 reports. Additives XEC reactions often benefit from the addition of additives. Both inorganic (Figure 10, Figure 11) and organic (Figure 12) additives can serve a variety of purposes: substrate activation, reductant activation, halide exchange, or simply to serve as a base. Many additives, however, can serve multiple proposed roles in the reaction (e.g., pyridine may act as a Bro̷nsted base and as a ligand for the catalyst) or have a role that is not yet understood. As a result, it was difficult to separate additives by use type. Thus, we have tracked the number of reports of the most commonly used organic and inorganic additives to provide readers with a palette to choose from. Common inorganic salt additives. Total = 312 reports. “Other” = reports with uncommon salt additives (≤2 reports) “Other Cations” = reports with uncommon cations (≤10 reports across entire cation). Element of cation for inorganic salt additives. Organic additives by number of reports. Total number of additives: 243. Other = additives with 1 report. Inorganic additives are more frequently used than organic additives and most commonly are thought to accelerate the reduction step (MgCl2, LiCl, LiBr), induce halide exchange on alkyls to increase reactivity (NaI), or both (NaI).37,38 In some cases, the additive can serve as a suitable electrolyte for electrochemical XEC (for example, KPF6 is often,39 but is not always,40 used as an electrolyte). In organizing inorganic additives by cation, alkali and alkaline earth metal salts predominate by one to two orders of magnitude over other salt additives, such as transition metal salts, owing, at least in part, to their relative abundance (Figure 10).37,38 Organic additives play many similar roles to inorganic additives (Figure 12). For example, TBAI and TBAB add halides to the reaction mixture and play a similar role to inorganic halide additives. Silane reagents (e.g., TMSCl, TESCl, TMSBr) can activate metal powder reductants (by stripping the oxide layer from metallic surfaces) or by playing a direct role in the reaction mechanism (e.g., (TMS)3Si• mediated XAT or R3Si+ activation of NHP esters).41−43 Various pyridines (pyridine, DMAP, 4-ethylpyridine) are often employed to minimize unwanted side products, such as β-hydride elimination or product isomerization, presumably by occupying coordination sites on the metal to block these processes.44,45 More hindered amines appear to play the role of base (2,6-lutidine, DIPEA). Notably, XEC reactions tolerate acid additives, such as TFA and Et3N•HCl. Reductants The beginnings of XEC trace themselves to reactions that were stoichiometric in metal, such as the Ullman coupling (stoichiometric copper)29 or nickel-mediated biaryl synthesis.24,25 XEC is defined, in part, as reactions where a catalyst is reduced as part of the catalytic cycle. Stoichiometric metal reductants were among the first explored for XEC.26 As Zn, Mn, Ni, and Co cost about the same, the main advantage is the freedom to utilize more complex ancillary ligands to modulate the catalyst reactivity and selectivity. Metallic reductants, such as Mn0 and Zn0 account for approximately 2/3 of all reductants studied in XEC reactions (Figure 13). However, difficulties with heterogeneous reactions, particularly on an industrial scale,46−49 have provided motivation to explore alternative reductant pathways, such as homogeneous reductants (e.g., tetrakis(amino)ethylenes34,50,51 and B2pin252−54) and photochemical and electrochemical XEC reactions (which are discussed in greater depth below). Reductants used in XEC. Total = 569 reports. Other = reductant categories w/ < 10 reports. “Echem” is discussed in further depth below and in a separate review.55 Amines (such as DIPEA, TEOA, and Et3N), silanes, and Hantzsch ester are most commonly used as terminal reductants in electrochemical and photochemical reactions. Although these reductants are not capable of reducing nickel on their own, the applied potential or the energy of the photons makes up the difference. Amine reductants, once oxidized, can decompose to form secondary amines, iminiums, alkyl radicals, and aldehydes, so managing these intermediates is sometimes key to finding the best amine. Most of these terminal reductants require added base in addition to the electron source. Finally, the organic waste produced can sometimes be difficult to separate from the products. In electrochemistry, there is an opportunity to separate the cathodic and anodic compartments and avoid most of these problems, but divided cells have their own complications.55 Photochemical Approaches Photochemically driven XEC generally uses a dye cocatalyst along with a terminal reductant (Figure 14). As with most photoredox chemistry reports, [(Ir(bpy)(ppy)2]X derivatives are the most-used cocatalysts and their properties can be varied by modifying the substitution on the bipyridine or phenylpyridine ligands. Cyanoarene-based donor–acceptor photocatalysts are also prevalent in XEC reactions, most frequently 4CzIPN. “No catalyst” reactions involve direct excitation of the substrate and terminal reductant, such as an EDA complex of Hantzsch ester with NHP esters.56 Photoredox catalysts utilized in XEC reactions. Electrochemical Approaches Electrochemical XEC (eXEC) reactions, as in all electrochemical reactions, use an applied potential to drive paired reduction (cathodic) and oxidation (anodic) reactions. The XEC reaction is a cathodic reaction and must be paired with an oxidation at the anode. Most commonly, a sacrificial anode is used. In this case, the oxidation reaction is the oxidation of the metal anode itself and this releases salts into the reaction medium (i.e., a Zn anode releases Zn2+).55 These metal salts may be noninnocent, and can either improve or hinder the reaction efficacy (dependent upon the identity of the metal salt, as well as reaction conditions), but are often ignored.57 This anode corrosion can be problematic on scale-up, and the metal salt can be difficult to remove. Among the common anodes, Zn, Fe, Mg, stainless steel, Al, and Co are all sacrificial anodes (Figure 15). Carbon and platinum are not sacrificial anodes and are usually paired with the oxidation of a terminal reductant, such as an amine (vide supra). Under an applied potential, the amine can be oxidized to provide the electrons for the cathodic reaction. To prevent the oxidized form of the sacrificial reductant from interfering with the cathodic process, these reactions are often run in a divided electrochemical cell.49,55 Anodes used in eXEC. Total count = 63. Multiple reports use multiple anodes dependent upon the conditions necessary for productive coupling. Cathodes used in XEC reactions are less diverse than their anode counterparts (Figure 16). The most common cathodes are nickel (usually foam) and reticulated vitreous carbon (RVC, a kind of high-surface area glassy carbon). Cathodes used in eXEC. Total count = 51. Catalysts Used in XEC XEC catalysis is dominated by the 3d transition metals (Ni, Co, Cu, Fe, Cr, Ti) with only a small number of reports with Pd and Rh (22 total) (Figure 17). Of these, nickel is far and away the most-used catalyst (88% of reports) and no other metal is more than 3%. This is likely for two reasons. First, as will be noted later, the mechanisms of these reactions usually require single-electron oxidation and reduction events, and these are usually easier with the 3d metals. Second, the development of XEC coincided with a general resurgence of interest in the 3d metals due to their lower cost, greater security of supply, and smaller environmental footprint. Somewhat confusingly, transition metals are also often used as terminal reductants for XEC (Zn, Mn, Fe, vide supra). Precatalysts used in XEC. Other = number of precursors with ≤2 reports. NiCl2(dme) = 102 reports. As XEC reactions include catalyst reduction as part of the catalytic cycle, the use of air stable precatalysts is common (Figure 17). Rather than Ni(cod)2, which is air-sensitive, various nickel halide salts are used. The same trend is observed for other metals. When differences are observed between precatalysts, they can usually be attributed to solubility in organic solvents (anhydrous NiX2 salts have poor solubility, but NiX2(dme) precatalysts are very soluble), water content, and the influence of the counterion (e.g., iodide in NiI2 might play a role like NaI). CoBr2 is the most frequently reported monometallic non-nickel metal source in XEC and is most commonly seen in C(sp2)–C(sp2) coupling. However, approximately half of all coupling reactions using CoBr2 have been reported over 10 years ago, representing an interesting area for future research. Pd precatalysts are most commonly reported under multimetallic conditions58,59 either in concert with Ni or Cu. Under these conditions, each metal serves a distinct purpose, most frequently with each metal selectively activating one coupling partner. In XEC reactions, multimetallic systems are most frequently observed in biaryl syntheses (Chapter 3) and for cogeneration of radicals in C(sp2)−C(sp3) bond-forming reactions (section 4). C(sp2)–C(sp2) Bond Formation Overview C(sp2)–C(sp2) bond formation has a rich history in the synthesis of pharmaceuticals, agrochemicals, dyes, materials, ligands, and natural products.29 In particular, the formation of symmetrical biaryls has long been accomplished using transition metals under reductive conditions, originally with copper (i.e., Ullmann coupling).60−62 Several important contributions in the field were later made, accomplishing symmetrical biaryl synthesis under both chemical and electrochemical conditions using stoichiometric nickel (including but not limited to the references cited herein).24,26,63−65 Soon thereafter methods using catalytic nickel were reported, as well as methods using palladium catalysts.29,66−68 The translation of the reductive homocoupling chemistry to cross-selective coupling provided fast access to these useful products, but high cross-selectivity was usually difficult to achieve29,60,62,68 except for when one “activated” component (usually an iodide) was coupled to an “unactivated” component (usually a bromide or chloride). For reactions with stoichiometric copper, high cross-selectivity could sometimes be achieved when the first aryl was reacted with copper (presumably to form an arylcopper species) followed by the second aryl halide.69 Nickel catalysis using stoichiometric amounts of the metal was also developed followed by the first forays into what is now called cross-electrophile coupling using a nickel or palladium catalyst and stoichiometric reducing agent (initially electrochemical conditions or metal powders). This review will not cover uses of stoichiometric copper or nickel, but will cover the catalytic reactions. The nascent state of XEC for C(sp2)–C(sp2) bond formation contrasts with the ubiquity of cross-coupling of aryl nucleophiles (Ar–M, M = ZnX, MgX, BR2, SiR2OH, etc.) with aryl electrophiles.7,9,12,29 C(sp2)–C(sp2) cross-electrophile coupling (XEC), although challenging, offers several advantages including higher commercial availability and stability70 of Ar–X vs organometallic reagents. Furthermore, the functional-group compatibility of XEC approaches can decrease reliance on protecting groups and increase flexibility in synthetic routes. As might be surmised, the selective coupling of two different C(sp2) electrophiles is a challenge because the two substrates and any potential intermediates are very alike in reactivity. This challenge can be addressed with some combination of three strategies: (1) using an excess of one coupling partner to maximize the cross-product yield with respect to the limiting reagent (at the cost of large amounts of dimeric products), (2) utilizing substrates that are better differentiated by arene electronics and substitution (substrate control), and (3) finding approaches that differentiate the substrates based upon the leaving group regardless of electronics, such as multimetallic systems. A variety of couplings involving (hetero)aryl and vinyl halides will be discussed, including pseudohalides such as sulfonate esters. Also included are couplings with acyl donors. Expansion to many other classes of electrophiles have also been recently reported and will be examined as well. One broad report, while largely C(sp2)–C(sp3) XEC (discussed in section 4.2.3.3, Scheme 163), also coupled aryl halides with alkynyl, alkenyl, and aryl electrophiles.71 We elected not to cover reactions that start with two electrophiles but proceed by in situ formation of an organometallic reagent by direct insertion (e.g., Mg0 reacting with Ar–Br to form ArMgBr followed by Kumada coupling).72−76 We chose to cover reactions where an arylmetal intermediate accumulates in the reaction mixture via transmetalation from the catalyst to an intermediate shuttling metal.77 We realize that this distinction is subtle, but (as in other sections) we chose to focus on reactions where the catalyst is reduced as an essential part of the catalytic cycle. A diverse array of ligands has been utilized in XEC for C(sp2)–C(sp2) bond formation, including bi- and tridentate nitrogenous ligands, mono- and bidentate phosphine ligands, and carbene ligands (Figure 18). Ligands reported in C(sp2)–C(sp2) XEC reactions. Ligands used in C(sp2)–C(sp2) bond formation represent a much broader array of scaffolds than are seen in other sections, owing to the greater diversity of metals used in this coupling type (Figure 19). The greatest difference is the increased portion of phosphine-based ligands (both monodentate and bidentate), which are not commonly employed in Ni-catalyzed XEC reactions. That being said, ligands on nickel in the reactions in this section largely follow trends observed in all XEC reactions, with bipyridine ligands dominating (Figure 19). Similarly, apart from acac, all ligands on palladium are unsurprisingly phosphine-based (Figure 20). Nickel and palladium, both in monometallic and bimetallic-catalyzed reactions, represent the greatest portion of metal precatalysts employed in this section. Common ligands on nickel in C(sp2)–C(sp2) XEC reactions. Common ligands on palladium in C(sp2)–C(sp2) XEC reactions. Mechanistic proposals for C(sp2)–C(sp2) XEC reactions fall into two categories: (1) sequential oxidative additions at a single metal center (Figure 21A) or (2) transmetalation between two species (Figure 21B,C).78−82 The transmetalation category can be between two different catalytic intermediates (Figure 21B, usually differentiated by metal identity, oxidation state, or ligand sphere), or involve an additional organometallic intermediate (Figure 21C, usually derived from the reductant, e.g., ArZnX from Zn0 reductant). Both mechanisms require differentiation of the two electrophiles in oxidative addition, but the transmetalation mechanism requires additional selectivity in the aryl transfer step (Figure 21B,C). Additional mechanistic details will be discussed as they arise. (A) Sequential oxidative addition mechanism, (B) Direct multimetallic transmetalation mechanism. (C) Multimetallic transmetalation via an organometallic intermediate shuttle. Ma may equal Mb. Biaryls XEC of Aryl Halides Ni-Catalyzed Systems Gosmini and co-workers developed two methods to couple aryl halides with 2-halopyridines.83 In the presence of ZnBr2, formation of an arylzinc reagent through an electrochemical process and sequential coupling with 2-halopyridine are all catalyzed by the same nickel complex. The authors also propose a nonorganozinc mediated coupling of aryl halides and 2-halopyridines (Scheme 1) by a sequential oxidative addition mechanism (Figure 21A). They found that aryl bromides were more reactive than 2-chloropyridine, resulting in oxidative addition of the aryl bromide to the nickel(0) precatalyst to form an arylnickel(II) complex. The authors found that the use of more activated aryl bromides results in increased homocoupling yields as the reduced arylnickel(I) complex reacts faster with the aryl bromide than the 2-chloropyridine, thus limiting the scope to include only aryl bromides with electron-donating groups. However, if the 2-chloropyridine is swapped with the more reactive 2-bromopyridine, activated aryl bromides could be successfully cross-coupled in this protocol. Ni-Catalyzed Electrochemical XEC of Aryl Halides with 2-Halopyridines (1998) Previous work from Gosmini and co-workers attempting to couple aryl halides with 2-arylpyrimidines and 2-arylpyrazines under previously established conditions was found to be unsuccessful most likely due to the strong ligation of pyrimidine or pyrazine to the nickel catalyst.83 The authors reported a new set of electrochemical conditions capable of coupling aryl halides with chloropyrimidines and 2-chloropyrazines.84 The authors found that the introduction of iron salts at the beginning of electrolysis resulted in good yields of the cross-coupled product. The proposed mechanism follows Figure 21A with initial oxidative addition of the aryl bromide followed by the aryl chloride. The authors were able to couple aryl halides with both electron withdrawing and electron donating groups by changing the halide to better match the reactivity of the chloropyrimidine or 2-chloropyrazine (Scheme 2). The aryl bromide is paired with more activating electron withdrawing groups while the aryl iodide is paired with electron donating groups. Ni-Catalyzed Electrochemical XEC of Aryl Halides with Chloropyrimidines and 2-Chloropyrazines (2000) Following their previous reports of the beneficial effect of iron salts in heteroaryl couplings, Gosmini and co-workers applied their same system to various substituted 2- and 3-halopyridines.85 The authors report a ∼20% improvement in yield by switching their previous zinc anode with an iron anode. A range of electron-donating and electron-withdrawing aryl halides and heteroaromatic halides were successfully coupled (Scheme 3). Ni-Catalyzed Electrochemical XEC of Aryl Halides with Halopyridines (2000) In 2007, Léonel and co-workers reported an electrochemical Ni-catalyzed coupling of aryl halides with 2-chloropyridazines to form aryl- and heteroarylpyridazines.86 The authors found aryl substitution and halogen identity to play a significant role in the yields. Unactivated aryls required the aryl iodide for efficient reactivity, but aryl bromides were sufficient for nearly all electron-withdrawing substituents except those in the ortho-position, which also required aryl iodides. (Scheme 4). The authors proposed a sequential oxidative addition catalytic cycle (Figure 21A). Ni-Catalyzed Electrochemical XEC of Aryl Halides with 2-Chloropyridazines (2007) In 2009, the Gosmini group also reported translation of electrochemical conditions to chemical conditions (Mn reductant) for the Ni-catalyzed cross-electrophile coupling of aryl halides with 2-halopyridines to form functionalized 2-arylpyridines.87 Both electron-donating and electron-withdrawing substituents were tolerated, but differing halogen identities (iodide and bromide, respectively) were required (Scheme 5). For example, when coupling with 2-chloropyridine an aryl chloride is best for electron-poor aryls and an aryl bromide is best for electron-rich aryls. The cross-coupling is efficient at room temperature for unhindered substrates, but ortho- substitution requires heating to 60 °C (presumably due to slow reductive elimination). Functionalized 2-halopyridines were also tolerated but required further matching the reactivity of each coupling partner. Ni-Catalyzed Cross-Electrophile Coupling of Aryl Bromides with 2-Halopyridines (2009) at 60 °C. In 2011, Le Gall and Léonel reported an electrochemical Ni-catalyzed XEC of aryl halides with 6-chloropyrimidines (Scheme 6).88 A decrease in yields was noted when using 2-chloropyrimidines with NHAr substitution at the 4-position due to competing dimerization. The authors hypothesized a sequential oxidative addition mechanism with the pyrimidine reacting first (Figure 21A). Ni-Catalyzed Electrochemical XEC of Aryl Halides with 2-Chloropyrimidines (2011) In 2012, Navarro and co-workers reported a Ni-catalyzed XEC of 2-halopyridines to form 2,2′-bipyridines (Scheme 7).89 The authors report that using an iron anode provided higher yields than their previously used zinc anode. They indicate that trapping of free 2,2′-bipyridine is facilitated by the iron salts formed during oxidation. The authors propose a sequential oxidative addition mechanism (Figure 21A). Ni-Catalyzed Electrochemical XEC of Various 2-Halopyridines to Form Nonsymmetrical 2,2′-Bipyridines (2012) Léonel and co-workers reported an electrochemical Ni-catalyzed XEC of aryl halides with 3-amino-6-chloropyridazines (Scheme 8).90 Using previous electrochemical methods developed by the group, only moderate yields were obtained. However, the authors saw an increase in yields by switching the anode from iron to an iron/nickel anode. They hypothesize that nickel salts generated by the anode may allow for the regeneration of the active organonickel species. Aryl iodides are best for electron-rich aryls and require an additional equivalent added to the reaction in the middle of electrolysis. For electron-poor (hetero)aryls, aryl bromides were best. Electrochemical studies were consistent with a sequential oxidative addition mechanism (Figure 21A) with initial oxidative addition of the chloropyridazine. A variation on these conditions was later utilized to synthesize a variety of heteroaryl small molecules for biological evaluations as antitumor agents.91 Ni-Catalyzed Electrochemical XEC of Aryl Halides with 3-Amino-6-Chloropyridazines (2013) Kunhua Lin, Qun Qian, and co-workers reported on the XEC of aryl halides to form unsymmetrical biaryls (Scheme 9).92 The authors found the addition of MgCl2 and Bu4NI to be necessary for coupling and attributed this to these reagents facilitating removal of salts from the zinc surface. Control tests were performed to rule out the intermediacy of an arylzinc species (Figure 21C). The authors favored a sequential oxidative addition process instead (Figure 21A). Ni-Catalyzed XEC of Aryl Halides to Form Biaryls (2013) Xin-Fang Duan and co-workers reported an external-ligand free Ni-catalyzed XEC of two different 2-halopyridines to form nonsymmetrical 2,2′-bipyridines (Scheme 10).93 Instead of electrochemical conditions utilized previously (Scheme 7), zinc metal powder is the terminal reductant. The authors proposed that the 2,2′-bipyridines formed in the reaction coordinate to nickel and catalyze further turnovers. This was supported by strong evidence: the coupling of 3-bromopyridines resulted in 0% yield of 3,3′-bypridine, but with 2,2′-bipyridine added the yield of 3,3′-bypridine was 83%. A range of 2,2′-bipyridines were synthesized, including the natural product caerulomycin F. Ni-Catalyzed XEC of 2-Halopyridines to Form Unsymmetrical 2,2′-Bipyridines (2014) In 2016, Léonel, Le Gall, and co-workers reported a method for the electrochemical XEC of aryl halides with 4-chloro-6-pyrrolylpyrimidines (Scheme 11).94 These conditions are very close to those they utilized for 3-amino-6-chloropyrimidines (Scheme 8). Ni-Catalyzed Electrochemical Cross-Electrophile Coupling of Aryl Halides and 4-Chloro-6-Pyrrolylpyrimidines (2016) Rueping reported a method for the photochemical XEC of polyfluorinated arenes with aryl bromides and aryl iodides (Scheme 12).95 The system uses an iridium dye photoredox catalyst, a tertiary amine as a terminal reductant, and Cs2CO3 to sequester the HX formed under these conditions. The authors propose a variation on sequential oxidative addition (Figure 21A) where an intermediate arylnickel(II) reacts with the perfluoroaryl radical anion to generate the diarylnickel(III) species that can reductively eliminate to form the desired product. The difference between this mechanism and Figure 21A is that the perfluoroaryl species is reduced instead of the nickel species. As evidence for the reduction step, the authors found that reactions without Cs2CO3 formed the hydrodefluorinated product (presumably by H atom abstraction of the radical anion from i-Pr2NEt•+). This proposed mechanism, although unusual for C(sp2)–C(sp2) XEC, is familiar for C(sp2)–C(sp3) XEC.96 Nickel and Iridium Photochemical XEC of Polyfluorinated Arenes with Aryl Bromides (2020) In 2021, Lautens reported a Ni-catalyzed XEC between aryl and heteroaryl chlorides (Scheme 13).97 The presence of MgCl2 and iodide were both essential and they were proposed to expediate reduction of Ni(II). Some degree of substrate-matching was required: heteroaryl chlorides could be coupled with activated aryl chlorides, but less activated aryl chlorides were not selective. In this case, electron-neutral or electron-rich aryl bromides could be used. Intriguingly, an intramolecular XEC reaction proceeded in 48% yield, suggesting a mechanism as in Figure 21A. Ni-Catalyzed XEC Between Aryl Chlorides (2021) In 2021, Naoto Chatani reported a method for the cross-electrophile coupling of ortho-fluoro aryl amides with aryl chlorides (Scheme 14).98 LiCl and ZnCl2 were effective additives to facilitate reduction of Ni(II) to Ni(0) and promote a key transmetalation step, respectively. Lithium tert-butoxide was crucial as a base to deprotonate the −NH of the amide, which could then coordinate to Ni(0) and promote aryl C–F oxidative addition. A variety of functional groups were tolerated such as a phosphonate and a primary aryl amine. An aryl triflate or aryl tosylate could also be used in place of an aryl chloride. Ni-Catalyzed XEC of Aryl Fluorides with Aryl Chlorides by Use of a Directing Group (2021) In 2022, Tian-Sheng Mei reported a Ni-catalyzed electrochemical XEC of 1,2-dibromobenzene derivatives with 2,2′-diiodo-biphenyl derivatives for the synthesis of triphenylenes (Scheme 15).99 The reaction setup was carried out in an undivided cell with a sacrificial Fe anode, Ni foam cathode, and NaI as the electrolyte. A series of CV and electrolysis experiments were run with an (L)NiII(Ar)Br complex and in part led the authors to believe that the reaction starts with Ni(0) and the mechanism involves benzyne intermediates. Ni-Catalyzed Electrochemical XEC Between Dihalobenzene Derivatives (2022) Pd-Catalyzed Systems In 2000, Lemaire and co-workers reported the synthesis of unsymmetrical biaryls through the use of a Pd-catalyzed coupling reaction.100 (Scheme 16) Notably, the authors reported biaryls bearing both electron-donating and electron-withdrawing functional groups. The authors found that an excess of one coupling partner and high temperatures are needed to promote the unsymmetrical coupling and reduce the competitive homocoupling. The XEC is proposed to proceed through the oxidative addition of the aryl iodide to the Pd(0) center, followed by either a second oxidative addition or a nucleophilic substitution. Pd-Catalyzed Coupling of Iodo- and Bromoarenes (2000) In 2001, Lemaire and co-workers reported a Pd-catalyzed XEC of aryl iodides with an excess of aryl bromides (Scheme 17).101 Compared to nickel systems, where explicit, strong reductants are required, palladium systems can utilize relatively mild reductants (proposed to be Bu4NBr). The mechanism of this coupling is unclear, but was proposed to involve Pd(IV) as the penultimate intermediate. Reductive elimination from [PdIV]Ar1Ar2 then results in the formation of the unsymmetrical biaryl. Separation of the unsymmetrical biaryl from the side products of the excess aryl bromide made product isolation difficult, but the high yields obtained are notable. Pd-Catalyzed XEC of Iodoarenes with Bromoarenes (2001) In 2006, Yuhong Zhang, Yanguang Wang, and co-workers reported a Pd-catalyzed coupling of aryl halides to form unsymmetrical biaryls (Scheme 18).102 As observed by Lemaire (Scheme 17), a conventional reductant was not required. The authors used polyethylene glycol (PEG) in place of organic solvents and were able to control selectivity by adjusting the amount of PEG. They found that larger chain length PEGs were selective toward the biaryl product and lowered the yield of hydrodehalogenation, the major side product. Although the authors noted that they could recycle the PEG 4000, which is inconsistent with it being the terminal reductant, we think it is likely that oxidation and partial degradation of the PEG is the most-likely source of electrons. As PEG 4000 is an affordable, relatively safe solvent/reductant, this system is especially attractive. Substrates with electron-withdrawing and electron-donating groups were well tolerated, but aryl halides with hydroxyl or amino substituents yielded no product due to the interference with oxidative addition of the aryl halides to palladium. Pd-Catalyzed XEC of Aryl Halides (2006) With Pd(OAc)2 (5 mol%). Lingling Chu disclosed a complementary photoredox method for the synthesis of perfluoroarenes, catalyzed by Pd instead of Ni (Scheme 19).103 Similar to work by the Rueping lab (Scheme 12),95 a radical anion from the aryl fluoride is proposed to be key in a sequential addition-type mechanism. A broad set of aryl bromides and electron-neutral and electron-deficient aryl triflates could be coupled with polyfluoroarenes, however aryl iodides could not be used in this system. Palladium and Iridium Photochemical XEC Between Aryl Bromides/Triflates and Polyfluoroarenes (2021) (a) With X= Br (2.0 equiv) and Cy2NH (0.5 equiv). (b) With X = OTf (1.5 equiv), Cy2NH (0.8 equiv). LiI (0.3 equiv), and 1,4-dicyanobenzene (5 mol%). In 2021, Peng Liu, Toste, and Baihua Ye reported a method for the Pd-catalyzed XEC of aryl bromides with aryl iodides mediated by zirconaaziridine as both a reductant and aryl group shuttle (Scheme 20).104 The mechanism is proposed to proceed by initial reaction of palladium with the aryl iodide to form (L)PdII(Ar)(I), redox transmetalation of (L)PdII(Ar)(I) with the zirconaaziridine to form a pool of arylzirconacene, and subsequent Pd-catalyzed cross-coupling of this arylzirconacene with the remaining aryl bromide. The authors proposed a key redox transmetalation step of zirconaaziridine with (L)PdII(Ar)(I) that was supported by DFT calculations and experimental data. Direct activation of the aryl iodide by the zirconaaziridine was proposed to be a minor pathway. This mechanism is an extreme case of Figure 21C, where the intermediate species accumulates to a large extent. Perhaps as a result of this separation of the two stages, an impressive range of biaryl products were accessible, including aryl–aryl, heteroaryl–aryl, and heteroaryl–heteroaryl substrates (furan, pyrazole, etc.). Pd-Catalyzed XEC of Aryl Halides Mediated by Zirconaaziridine as a Reductant and Shuttle Agent (2021) Cobalt-Catalyzed Systems As an expansion of their previous work showing effective and efficient biaryl synthesis through cobalt-catalyzed electrochemical XEC, Gosmini and co-workers adapted their system for 4-chloroquinolines.105 Pyridine was again found to be essential as a ligand for cobalt, allowing for both electron-donating and electron-withdrawing groups to be coupled in moderate yields (Scheme 21). Cobalt-Catalyzed Electrochemical XEC of Aryl Halides and 4-Chloroquinolines (2001) Gosmini and co-workers reported a new method that effectively couples two aryl halides both bearing electron-withdrawing substituents using cobalt catalysis instead of nickel catalysis.106 Their work showed that selectivity toward the cross-product increases with higher cobalt catalyst loading, and that pyridine is necessary as a cosolvent (presumably it acts as a ligand for cobalt). Aryl halides bearing electron-withdrawing groups in the ortho-, meta-, and para- positions were all well-tolerated (Scheme 22). Aryl bromides and aryl chlorides also afforded moderate yields, but aryl chlorides exhibited lower rates of reactivity. The scope and yields reported are in many cases superior to the analogous Ni-catalyzed method. Cobalt-Catalyzed Electrochemical XEC of Aryl Halides (2002) In a major advance for the field, Gosmini and co-workers reported a cobalt-catalyzed cross-electrophile coupling of aryl halides to form unsymmetrical biaryls in 2008 (Scheme 23).107 Compared to their previous electrochemical conditions, these conditions utilized Mn powder reductant in place of an iron anode and an explicit ligand (triphenylphosphine) in addition to pyridine as a cosolvent. This coupling exhibited high functional group and steric tolerance. Heteroaryl halides could be coupled, but 3-bromothiophene and 2-chloropyridines only gave moderate yields due to their ability to act as a ligand for cobalt. The authors synthesized 2-(4-tolyl)benzonitrile, a key intermediate of the syntheses of sartan derivatives, in 70% yield. The authors proposed a sequential oxidative addition mechanism (Figure 21A). Cobalt-Catalyzed XEC of Aryl Halides to Form Unsymmetrical Biaryls (2008) Rh-Catalyzed Systems In 2021, Krische disclosed an XEC of aryl bromides with aryl iodides with formate as the reductant (Scheme 24).108 2-pyridyl bromides were coupled in modest yields, with the major side product resulting from hydrodehalogenation. The authors also demonstrated an alternative method with Pd metal instead of Rh, which provided a higher yield. In both cases, TBAI was an effective additive, as the authors propose that it forms a more active catalyst to engage in oxidative addition. This is a particularly exciting and rare case of the use of an organic, green reductant (formic acid), but it remains to be seen if this success can be translated to other coupling partners. Rh-Catalyzed XEC of Aryl Bromides with Aryl Iodides (2021) With Pd metal (1 mol%), 3.0 equiv NaO2CH, 2.0 equiv TBAI in dioxane at 130 °C. XEC of Aryl Halides and Aryl Pseudohalides with Aryl Pseudohalides In addition to aryl halides as coupling partners, there have been several reports in the literature to form biaryls using activated phenol derivatives, including tosylates and/or triflates. As phenols constitute a distinct substrate pool from aryl halides,109 these reactions complement couplings of two different aryl halides. Ni-Catalyzed Systems Xicun Wang, Zhengjun Quan, and co-workers reported on the synthesis of tetrasubstituted pyrimidines using Ni-catalyzed cross-electrophile coupling (Scheme 25).110 The authors noted some degree of electronic matching was required: lower yields were obtained with pyrimidin-2-yl tosylates bearing electron-donating groups. The authors proposed a sequential oxidative addition mechanism (Figure 21A) with initial oxidative addition of the pyrimidine tosylate. Ni-Catalyzed XEC of Aryl Bromides with Pyriminidin-2-yl Tosylates (2017) In 2018, Chao-Jun Li and co-workers reported a Ni-catalyzed cross-electrophile coupling of aryl halides with aryl pseudohalides using N2H4 as a mediator.111 The authors considered the reactivity of N2H4 when examining reaction conditions, concluding that a stronger ligand would be needed to outcompete the hydrazine for binding. Tested bidentate ligands were ineffective, but the small, electron-rich monodentate ligand PMe3 was effective. While coupling was hindered by substituents in the ortho-position, groups of varying electronics gave moderate to good yields (Scheme 26). Heteroaryl bromides were also well tolerated in this coupling. Mechanistic experiments suggested that aryl hydrazines are not intermediates. The authors proposed a sequential oxidative addition mechanism (Figure 21A). Ni-Catalyzed XEC of Aryl Halides with Aryl Pseudohalides Using Hydrazine as the Reductant (2018) Multimetallic Catalyzed Systems A general challenge for monometallic systems is differentiation of the two electrophiles by the same catalyst. In many cases, it is proposed that oxidative addition selectivity can change with oxidation state (Figure 21A), but transmetalation-based mechanisms suffer from lower selectivity (Figure 21B,C). Multimetallic approaches allow the use of two catalysts, one tuned to react with each electrophile, but this approach is less developed.58 In 2015, our group disclosed the nickel and palladium multimetallic catalyzed XEC of aryl bromides with aryl triflates.109 Based upon literature precedents, the palladium catalyst is selective for oxidative addition of the aryl triflate and the nickel catalyst is selective for the aryl bromide. Potassium fluoride was found to further enhance both selectivity and rate. A range of substrates were able to be coupled, including electronically similar and dissimilar aryl bromides and aryl triflates (Scheme 27). The transmetalation mechanism (Figure 21B) is proposed to be selective because of the differential stability of the two intermediates. This “persistent metal effect” provides selective transmetalation because the (dppp)Pd(Ar)(X) is stable and unreactive with itself (persistent), but reacts quickly with the (bpy)Ni(Ar) complex.58 This situation, analogous to the persistent radical effect,112 can engender high cross-selectivity as long as both oxidative addition steps and reduction steps are fast. Nickel and Palladium Multimetallic XEC of Aryl Bromides with Aryl Triflates (2015) With aryl triflate (3 equiv). In 2019, our group extended Pd and Ni multimetallic XEC to the coupling of aryl chlorides with aryl triflates (Scheme 28).113 High selectivity for the product over the homodimerized side products could be achieved with this method. LiCl proved to be a critical additive, enabling reduction of Ni on the Zn surface. It was observed that ZnCl2 and Zn(OTf)2 salts inhibited the reduction of (L)NiII(X2) and LiCl could overcome this poisoning effect. Broad chemical diversity was demonstrated, including electron-rich and neutral aryl chlorides as well as sterically hindered di-ortho-substituted substrates. Nickel and Palladium Multimetallic-Catalyzed XEC of Aryl Chlorides with Aryl Triflates (2019) With 6,6′-Brbpy (5 mol%). This nickel and palladium system could be further extended to the coupling of two different phenol derivatives: aryl tosylates with aryl triflates (Scheme 29).20 A series of mechanistic studies established a ZnX2-mediated transmetalation mechanism (Figure 21C) and selective oxidative of tosylate at nickel and triflate at palladium. A wide range of substrates could be coupled, in particular where phenol derivatives are the most convenient arene source (compared to arylmetal reagents). Nickel and Palladium Multimetallic XEC of Aryl Tosylates with Aryl Triflates (2020) (a) With aryl tosylate (1.5 equiv). (b) At 60 °C. Concurrently, Kramer and Zhong Lian published a closely related approach to the coupling of aryl tosylates with aryl triflates (Scheme 30).114 It is exciting to note that the conditions were quite different from those in Scheme 29: the bisphosphine used has a different bite angle and is more electron-rich, the nitrogen ligand is more sterically hindered, and no additive halide salts were required. The substrate scope is also excellent and includes an extensive number of sterically hindered substrates. Notably, protic substrates were tolerated such as benzyl and aliphatic alcohols, that can be problematic in other nickel and palladium multimetallic systems. Nickel and Palladium Multimetallic XEC of Aryl Tosylates with Aryl Triflates (2020) Our group later reported on refined conditions for a general coupling of heteroaryl triflates with heteroaryl bromides/chlorides to form biheteroaryl products (Scheme 31).115 Substrates with varying electronics, sterics, 5-membered, 6-membered, and fused heteroaryl rings were all tolerated in this method. This included the synthesis of biheteroaryl substrates which could strongly coordinate to the catalysts. Furthermore, the chemistry was demonstrated in 96-well plate format and a “toolbox plate” (consisting of various ligands, additives, and reductants) was developed to allow for rapid optimization of difficult substrate combinations. Nickel and Palladium Multimetallic XEC of Heteroaryl Triflates with Heteroaryl Bromides and Chlorides (2021) X = Br unless otherwise noted. (a) With X = Cl. In 2023, Beckham, Stahl, Weix, and co-workers developed an electrochemical adaptation of the reported multimetallic XEC methods from our group and applied them to the synthesis of lignin-derived plasticizers (Scheme 32).116 Of particular note was the use of chemical reductants in HTE to efficiently find optimal catalyst conditions followed by a relatively easy translation to electrochemical conditions. Also of note is the coupling of an aryl tosylate with an aryl mesylate. These coupling partners are more attractive on scale than triflates but are relatively unreactive. In some examples, synthesized plasticizers exhibited superior properties compared to traditional plasticizers. Synthesis of Lignin-Derived Biaryls by Palladium and Nickel Multimetallic Electrochemical XEC of Two Sulfonate Esters (2023) With PdCl2(MeCN)2 (2 mol%). Chengrong Ding reported the palladium and nickel multimetallic XEC of aryl bromides with aryl fluorosulfonates (Scheme 33).117 Key to this protocol was the use of both Pd and Ni, as yields dramatically decreased under a monometallic system. A transmetalation mechanism similar to other Pd and Ni XEC reactions was proposed. Fluorosulfonates are attractive alternatives to triflates and tosylates because they are easily synthesized on scale with sulfuryl fluoride and are more stable than triflates. Palladium and Nickel Multimetallic XEC of Aryl Bromides with Aryl Fluorosulfonates (2023) At 40 °C. XEC of Aryl Halides with Other Coupling Partners Ni-Catalyzed Systems In 2023, Yuanhong Ma and co-workers described a method for the synthesis of biaryls by Ni-catalyzed XEC of aryl trifluoromethyl sulfones with aryl bromides (Scheme 34).118 The combination of bipyridine and phosphine ligands was necessary for achieving good yields. The authors propose a sequential oxidative addition mechanism (Figure 21A). Synthesis of Biaryls via Ni-Catalyzed XEC Between Aryl Sulfones and Aryl Bromides (2023) Pd-Catalyzed Systems In 2023, Ranjan Jana demonstrated a Pd-catalyzed XEC of aryl diazonium salts, which are readily made from anilines, with aryl iodide or diaryliodonium salts (Scheme 35).119 Several notable features of these conditions include the addition of ethanol for activation of Pd(0), and utilizing Ag2CO3 to preserve the catalytic activity of Pd and abstract iodide ions. Chemoselectivity was high throughout their substrate scope and various diaryliodonium salts could be used. Pd-Catalyzed XEC of Aryl Diazonium Salts with Aryl Iodides or Diaryliodonium Salts (2023) (a) With X= I. (b) With X= I+-Mes –OTf. (c) With X= I+-Ph –BF4. Cobalt-Catalyzed Systems In 2020, Gandon and Gosmini reported a cobalt-catalyzed XEC between benzonitriles and aryl bromides/chlorides to form biaryls (Scheme 36).120 AlMe3 was an effective additive for increasing cross-selectivity, presumably by increasing the reactivity of Aryl–CN bonds. Two viable transmetalation mechanisms (Figure 21B) were proposed that started from [Co0] or [Co–I]. Remarkably, reductive elimination from (bpy)2CoII(Ar1)(Ar2) (ΔG‡ = 16.4 kcal/mol) was easier than from [(bpy)2CoIII(Ar1)(Ar2)]+ (ΔG‡ = 23.7 kcal/mol). This unexpected result could perhaps be understood by the CoII complex being formally 19-electron vs 18-electron for the CoIII complex. Cobalt-Catalyzed XEC of Benzonitriles with Aryl Halides (2020) Intramolecular reaction. Multimetallic Catalyzed Systems Yuanhong Ma and co-workers reported the Ni and Pd multimetallic XEC of triarylphosphines (symmetric and nonsymmetric) with aryl bromides to form biaryls (Scheme 37).121 The conditions tolerated free -NH2 and −OH groups, which is not always the case for other examples of this system. The authors optimized against a variety of challenges relevant to this uncommon class of electrophiles, including strong coordination of the triarylphosphines to metals and steric hindrance. The authors propose a sequential oxidative addition mechanism (Figure 21A) via a key tetraarylphosphonium intermediate, rather than the usual transmetalation mechanism invoked for reactions catalyzed by this system. Pd and Ni Multimetallic Catalyzed XEC of Triarylphosphines with Aryl Bromides (2022) With diphenyl(4-(trifluoromethyl)phenyl)phosphane. XEC of Aryl Carboxylic Acid Esters, Aryl Ethers, and Anilines Aryl carboxylic acids and anilines are both attractive substrate pools that complement phenols and aryl halides but are rarely utilized in XEC reactions. While phenols are often coupled via sulfonate esters (vide supra), aryl ethers are attractive because they are very stable and atom economic (for methyl ethers). The following section addresses reactions of these useful, but unreactive, substrates. Pd-Catalyzed Systems In 2022, Junichiro Yamaguchi published a Pd-catalyzed doubly decarbonylative XEC of aryl esters to form unsymmetrical biaryls (Scheme 38).122 Interestingly, this method resulted in higher yields when utilizing m-xylene as solvent, compared to amide-based solvents more commonly used in XEC reactions, such as DMF. Pd-Catalyzed XEC of Aryl Esters (2022) With 1.5 eq of Ar. Cr-Catalyzed Systems Several methods using chromium catalysis for XEC have been reported by Xiaoming Zeng123,124 and co-workers (Schemes 39 and 40) and most recently by Xiaoming Zeng and Meiming Luo125 (Scheme 41) for unactivated aryl C–N, C–O, and C–F bonds coupled with aryl esters via decarbonylation (Scheme 40) or Aryl–OPiv oxidative addition (Scheme 40 and 41). Several mechanistic studies were conducted to tentatively rule out arylmagnesium species, and the authors prefer a sequential oxidative addition mechanism (Figure 21A and Scheme 41). Selective coupling of these typically inert aryl–X bonds is enabled by the imine directing group (as in directed C–H activation). Cr-Catalyzed XEC of Aryl Ethers with Aryl Esters (2020) R3 = t-Bu unless otherwise noted. (a) With R3 = 1-Ad, CrCl2/dtbbpy (5 mol%) at 60 °C. Cr-Catalyzed XEC of Aryl Amines with Aryl Esters (2020) (a) With CO2t-Bu coupling partner. (b) With CO2Ad coupling partner. Cr-Catalyzed XEC of Aryl Fluorides with Aryl Esters (2022) With adamantyl ester coupling partner, CrCl2/dnbpy (20 mol%), at 60 °C. Vinyl Arenes XEC of Vinyl Halides with Aryl Halides Ni-Catalyzed Systems In 2000, Condon and Durandetti reported the electrochemical Ni-catalyzed cross-electrophile coupling of vinyl bromides with heteroaryl bromides.126 The coupling was investigated using bromostyrene and 2- and 3-halopyridines and thiophenes (Scheme 42). The authors found that 2-bromoheteroarenes resulted in higher yields than 3-bromoheteroarenes, and that (E)-β-bromostyrene dimerizes more quickly than (Z)-β-bromostyrene. The coupling of bromothiophenes with bromostyrene was found to be more stereoselective than the same coupling with bromopyridines. Ni-Catalyzed Electrochemical XEC of Vinyl Bromides with Heteroaryl Bromides (2000) Qinghua Ren, Xinghua Zhang, and Hegui Gong reported a Ni-catalyzed cross-electrophile coupling of aryl iodides with vinyl bromides.127 In control experiments, the (E)-vinyl bromide coupled successfully, but the (Z)-vinyl bromide failed to couple with aryl halides. The authors developed three sets of conditions depending on substituent identity. Aryl iodides containing neutral or electron-withdrawing groups required the conditions shown in Scheme 43. A second set of conditions (Scheme 44) was tailored for coupling aryl bromides with styryl bromides. Ni-Catalyzed Cross-Electrophile Coupling of Electron-Poor Aryl Iodides with Vinyl Bromides (2016) Ni-Catalyzed XEC of Electron-Rich Aryl Bromides with Vinyl Bromides (2016) With KF (1 equiv). Finally, conditions to couple aryl bromides with alkyl-substituted vinyl bromides were developed (Scheme 45). Aryl bromides with both electron-poor and electron-rich groups were tolerated. Some products maintained their double bond configuration, but others yielded a mixture of the E- and Z-isomers. The authors propose a sequential oxidative addition mechanism (Figure 21A). Ni-Catalyzed Cross-Electrophile Coupling of Aryl Bromides with Alkyl Functionalized Vinyl Bromides (2016) Kramer, Gui-Juan Cheng, and Zhong Lian developed a Ni-catalyzed XEC of aryl bromides with gem-difluorovinyl tosylates (Scheme 46).128 A variety of aryl bromides were utilized. These include interesting applications in ligand synthesis, late-stage modification of drug-like small molecules, and material science (i.e., derivatization of tetraphenylsiloles). While coupling of 2-substituted-1,1-difluorovinyl tosylates with aryl bromides was unsuccessful, the authors demonstrated a proof-of-concept for XEC of an aryl iodide with gem-difluorovinyl tosylate. Based on mechanistic studies, kinetic experiments, and DFT calculations the authors proposed two possible mechanisms involving Ni(0)/Ni(II) species (Figure 21B,C). Ni-Catalyzed XEC of Aryl Bromides with Vinyl Tosylates (2020) with vinyl tosylate (4 equiv), NiCl2 (20 mol%), bpy (24 mol%), and Zn (4 equiv). Yuqiang Li and Guoyin Yin examined the synthesis of alkenylarenes and biaryls from aryl bromides and vinyl bromides/iodides (Scheme 47).129 Bathocuproine was superior to other ligands tested. Despite the equimolar substrate ratios, in some cases high yields could be obtained. Ni-Catalyzed XEC of Aryl Bromides with Vinyl Bromides and Other Aryl Bromides (2021) Pd-Catalyzed Systems As an expansion upon their previous work,130 Banwell and co-workers reported the Pd-catalyzed XEC of β-iodoenones with aryl halides (Scheme 48).131 The aryl scope was focused on activated substrates. The copper reductant does not reduce the sensitive nitro group, which is not tolerated with stronger reductants. Pd-Catalyzed XEC of β-Iodoenones with Aryl Halides (2018) In 2022 Banwell and White described a practical and operationally straightforward synthesis of enantiopure building blocks derived from quinic acid (Scheme 49).132 An important step was the XEC of α-iodoenone with o-iodonitrobenzene, which was conducted on a multigram-scale to deliver the product in high yield. This intermediate was then cyclized upon treatment with PtO2 and H2 to afford the enantiopure tetrahydrocarbazole. Multigram-Scale XEC of α-Iodoenone With o-Iodonitrobenzene (2022) Cobalt-Catalyzed Systems Gosmini and co-workers reported a cobalt-catalyzed XEC of aryl halides with β-bromostyrenes (Scheme 50).133 Control experiments showed that slow addition of the bromostyrene allowed for fewer equivalents to be used by slowing down dimerization of the more reactive coupling partner. Aryl bromides bearing electron-withdrawing and electron-donating groups were well tolerated, and ortho-substituted aryl halides gave good yields. Supported by DFT calculations, the authors proposed a sequential oxidative addition mechanism (Figure 21A). Cobalt-Catalyzed XEC of Aryl Halides with β-Bromostyrenes (2012) Beng and co-workers detailed a cobalt-catalyzed XEC of α-bromo eneformamides and enecarbamates with aryl bromides (Scheme 51).134 Several alkenyl bromides, in place of aryl bromides, were also successfully utilized in the coupling. The authors further derivatized the coupled products to access functionalized piperidines and azepanes. Cobalt-Catalyzed XEC of α-Bromo Eneformamides and Enecarbamates with Aryl Bromides (2015) At 40 °C. Multimetallic Catalyzed Systems Xuemei Zhang, Zhong Lian, and co-workers reported a multimetallic XEC with Pd and Ni for the synthesis of gem-difluoroalkenes (Scheme 52).135 Both aryl and vinyl triflates could be coupled with vinyl tosylates. Unlike in their previous work,128 a wide variety of 2-substituted 1,1-difluorovinyl tosylates could be used. Supported by mechanistic experiments, the authors proposed a ZnX2-mediated transmetalation mechanism (Figure 21C). Palladium- and Ni-Catalyzed XEC of Vinyl Tosylates with Aryl and Vinyl Triflates (2022) with dcypm (5 mol%) at 65 °C. XEC of Aryl Halides with Vinyl Acetates Ni-Catalyzed Systems Chuanhu Lei and Jian Jin reported the XEC of aryl bromides with vinyl acetate (Scheme 53).136 Dimethyl isosorbide, a more sustainable solvent derived from glucose biomass, could be used instead of less-favorable amide solvents. Although substituted alkenyl acetates could not be used, the scope of heteroaryl and aryl bromides was broad. Ni-Catalyzed XEC Between Aryl Bromides with Vinyl Acetate (2022) With vinyl acetate (10 equiv) and zinc (4 equiv). Cobalt-Catalyzed Systems Gosmini and co-workers reported a cobalt-catalyzed electrochemical XEC of aryl halides with vinylic acetates to form styrene derivatives (Scheme 54).137 Notably, one equivalent of 2,2′-bipyridine (bpy) was required for yields greater than 15%. Without the ligand, the reduced product dominated because the generated Fe(II) ions competitively complexed with the cobalt. Good yields were achieved using aryl chlorides and aryl bromides with substituents with varied electronics, but ortho-substituted aryl halides resulted in poor yields. Cobalt-Catalyzed Electrochemical XEC of Aryl Halides with Alkenyl Acetates (2003) With CoBr2 (20 mol%). Gosmini and co-workers were also able achieve the XEC of aryl halides with vinylic acetates using a metal reductant instead of electrochemistry with a sacrificial anode (Scheme 55).138 Manganese was shown to be the only metal to give good yields. However, trifluoroacetic acid (TFA) was needed to activate its surface. Zinc could reduce the cobalt complex to yield the organozinc chloride byproduct but did not result in the coupled product. The use of aryl chlorides was reported, but an electron-withdrawing group is necessary for reaction with the reduced cobalt species. Substitutions in the para-, meta-, and ortho- positions are tolerated, but large substituents in the ortho- positions shut down reactivity regardless of the halide identity. Cobalt-Catalyzed XEC of Aryl Halides with Alkenyl Acetates (2005) Synthesis of 1,3-Dienes Coupling of Vinyl Halides with Vinyl Halides and Pseudo Halides Ni-Catalyzed Systems Da Wu and Hegui Gong reported a Ni-catalyzed XEC of vinyl bromides for the synthesis of 1,3-dienes (Scheme 56).139 The authors propose the beneficial effects of the MgCl2 and TBAI may be due to activating the Zn surface. MgCl2 may also promote halide exchange to form vinylnickel(II) intermediates and TBAI may act to solubilize salts in the mixture. A breadth of compounds could be made, including 2,4-disubstituted dienes. The method was also applied to the total synthesis of solanone. However, more sterically hindered vinyl bromides such as 2-bromo-3-methylbut-2-ene and 1-bromo-2-methylprop-1-ene could not be coupled. Ni-Catalyzed XEC of Vinyl Bromides to Form 1,3-Dienes (2021) with 1 equiv LiCl, no TBAI. PMP = p-methoxyphenyl. Xing-Zhong Shu reported a Ni-catalyzed XEC of β-bromovinylboronates with vinyl triflates to form 1,3-dienylboronate esters with good stereocontrol (Scheme 57).140 Varying levels of substitution on the diene, as well as acyclic and cyclic dienes, could be synthesized. However, fully substituted β-bromovinylboronates lead to lower or no product formation. Ni-Catalyzed Synthesis of Dienylboronates from the XEC of Vinyl Electrophiles (2022) The syn/anti configuration is defined as the Bpin group syn/anti to the alkene from the alkenyl triflate coupling partner. Dayong Shi and co-workers reported the synthesis of monofluoro 1,3-dienes by XEC between gem-difluoroalkenes and alkenyl electrophiles (Scheme 58).141 The use of MgCl2, YbCl3, and TMSCl were suggested to activate the surface of Mn and/or undergo halide or anionic ligand exchange on Ni. The proposed mechanism involves oxidative addition of the vinyl triflate, migratory insertion of the gem-difluoroalkene, and β–F elimination to form product. Beyond a host of vinyl triflates used, the authors also demonstrated that aryl triflates, bromides, and iodides as well as vinyl tosylates, chlorides, bromides, and iodides could be utilized. Synthesis of Monofluoro 1,3-dienes via XEC of gem-Difluoroalkenes with Alkenyl Triflates (2023) With vinyl triflate (1.5 equiv), Mn (2.0 equiv), 4,4′-MeObpy, at 30 °C. Cobalt-Catalyzed Systems Beng and co-workers reported a method for the synthesis of azepines and benzotropones by a cobalt-catalyzed XEC of α-bromo enones with α-bromo enamides (Scheme 59).142 In addition to tropone-type coupling partners, dibromonapthoquinone, bromostyrenes, and bromoarenes were also good substrates for this method. The authors demonstrated further elaboration of the coupled products to access densely functionalized azaheterocycles. Cobalt-Catalyzed XEC of α-Bromo Enones with α-Bromo Enamides (2015) Multimetallic Catalyzed Systems In 2018, our group reported the Ni and Pd multimetallic catalyzed XEC of vinyl bromides with vinyl triflates to form substituted 1,3 dienes (Scheme 60).143 Our studies showed that the bipyridine ligand influenced selectivity but the phosphine ligand did not, and higher temperatures resulted in lower selectivity. Control experiments revealed that a zinc-mediated transfer of the vinyl bromide from nickel to palladium is a key step in the reaction, and a transient vinylzinc intermediate is formed, but does not accumulate under standard conditions. Sterically hindered vinyl halides resulted in lower yields. Nickel and Palladium Multimetallic Catalyzed XEC of Vinyl Bromides with Vinyl Triflates (2018) Ketones XEC with Acid Halides Ni-Catalyzed Systems Nédélec, Périchon, and co-workers reported an electrochemical synthesis of ketones through Ni-catalyzed XEC of aryl iodides with acid chlorides (Scheme 61).144 The anodic material was found to be important, with a magnesium anode only yielding ketone when a five-time excess of acid chloride was used. Furthermore, reduction of the product is seen with the magnesium anode. However, the optimal zinc anode results in high Faradaic and chemical yields when a one-to-one ratio of starting materials is employed. Ni-Catalyzed Electrochemical XEC of Acid Chlorides with Aryl Iodides (1989) Xing-Zhong Shu and co-workers reported the synthesis of enones from Ni-catalyzed XEC of vinyl triflates with acid fluorides (Scheme 62).145 Acid fluorides were advantageous in this system, and other acyl electrophiles such as acyl chlorides gave little to no yield of desired product. A variety of substrates were compatible, but only trace product was observed for 1,2-disubstituted, 1-substituted, or 2-substituted vinyl triflates. The authors propose a double oxidative addition mechanism (Figure 21A), but did not rule out a radical chain mechanism. Synthesis of Enones by Ni-Catalyzed XEC of Vinyl Triflates with Acid Fluorides (2019) (a) At 50 °C. (b) With tpy (15 mol%). Carbonylative XEC to Form Ketones Multimetallic Catalyzed Systems Xiao-Feng Wu and co-workers reported a Pd and Cu multimetallic carbonylative XEC of gem-difluoroalkenes with aryl iodides that exhibits excellent Z-selectivity (Scheme 63).146 Instead of a metallic reductant, this approach uses bis(pinacolato) diborane (B2pin2) with LiOMe, a system introduced by Hegui Gong for XEC.52 Alternative aryl electrophiles such as aryl bromides, aryl triflates, and aliphatic gem-difluoroalkenes were not good coupling partners. However, a broad range of α-fluorochalcones could be synthesized (and further derivatized). While the (Z)-fluorinated vinylboronate ester, derived from the B2pin2 reductant, was a side product of the reaction, several control studies lead the authors to believe they are not intermediates in the cross-coupling reaction. The authors propose a dual catalytic cycle in which the Pd performs all of the bond-breaking and forming steps while copper activates the B2pin2 to enable turnover of the Pd. Palladium and Copper Catalyzed Carbonylative XEC of gem-Difluoroalkenes with Aryl Iodides (2021) Kramer, Gui-Juan Cheng, and Zhong Lian disclosed a multimetallic Pd and Rh catalyzed carbonylative XEC of aryl bromides with aryl triflates to form a wide range of diaryl ketones (Scheme 64).147 Intriguingly, carbon monoxide serves as both the reductant and carbonyl source, removing the need for a stoichiometric metal reductant. Evidence for CO as the reductant was shown by conducting isotope-labeling experiments and DFT calculations. The authors propose a mechanism in which Pd activates both aryl electrophiles and Rh mediates transmetalation and carbonylation steps. Mechanistic data showed that the reaction is first order in [ArBr] and [Pd(acac)2], zero-order in [ArOTf] and [(PPh3)3RhCl], and that oxidative addition is the rate-limiting step. Palladium and Rhodium Multimetallic Catalyzed Carbonylative XEC of Aryl Bromides with Aryl Triflates (2022) XEC of Aryl Halides with Other Activated Acids Ni-Catalyzed Systems Jianlin Han and co-workers developed a Ni-catalyzed cross-electrophile coupling of aryl iodides with N-benzoyl glutarimides to form unsymmetrical diaryl ketones (Scheme 65).148 Substitution on the aryl iodide included both electron-donating and -withdrawing groups, but the activated benzoic acids only contained electron donating or neutral groups. Ni-Catalyzed XEC of Aryl Iodides With N-Benzoyl Glutarimides (2017) Jianyou Mao and Patrick Walsh reported the XEC of cyclic meso-anhydrides with aryl triflates to form γ-keto acids (Scheme 66).149 Optimization experiments revealed that a higher catalyst loading (20 mol%) resulted in a large increase in yield. The scope of aryl triflates tolerated in this coupling included those with electron-donating and electron-withdrawing groups. Sterically hindered aryl triflates also gave good yields. Ni-Catalyzed XEC of Aryl Triflates with Cyclic Meso-Anhydrides (2018) Weichao Xue and Hegui Gong published a method for the synthesis of thioesters via XEC of aryl triflates with S-alkyl thiocarbonates (Scheme 67).150 Electron-poor aryl triflates worked well, and slight modification of the conditions such as increased temperature and addition of tetrabutylammonium chloride, provided access to electron-rich and -neutral aryl triflates. The authors suggest sequential oxidative addition (Figure 21A) for the mechanism and ruled out a radical pathway. Synthesis of S-alkyl Aroyl Thioesters by XEC of Aryl Triflates with S-Alkyl O-tert-butyl Thiocarbonates (2021) (a) At 40 °C. (b) At 80 °C and n-Bu4NCl (2.0 equiv). Jin Xie and co-workers reported the XEC of aryl bromides with aryl carboxylic acids by dual Ni and Ir catalysis (Scheme 68).151 Alkyl bromides could also be used as substrates (not shown here). In this system, triphenylphosphine is the terminal reductant/activating agent for the carboxylic acid. It is proposed to be oxidized and react with the carboxylic acid to generate a phosphoranyl radical intermediate. This species can undergo homolysis to form an acyl radical and triphenylphosphine oxide. The acyl radical is proposed to react with an arylnickel(II) intermediate to generate the product. The authors demonstrate a broad scope, particularly for substrates which have functional groups incompatible with the traditional Weinreb ketone synthesis such as aldehydes, esters, and ketones. Nickel and Iridium Photochemical XEC of Benzoic Acids with Aryl Bromides to Form Diaryl Ketones (2020) Jin Xie and co-workers, in collaboration with Chengjian Zhu and Xiao-Song Xue, later disclosed a method under modified conditions from their previous report for the synthesis of tetrasubstituted alkenes (Scheme 69).152 Interestingly, the reaction could be run under air using Ni(COD)(duroquinone (DQ)) as the nickel precatalyst. The authors propose that this method is mechanistically similar to their previous report. Furthermore, DFT calculations support the authors claims of a Ni(0)/Ni(II)/Ni(III) mechanistic cycle. Synthesis of α,β-Unsaturated Ketones by Nickel and Iridium Photochemical XEC of Carboxylic Acids with Vinyl Triflates (2022) With [Ir] (2 mol%), [Ni] (6 mol%), and Cs2CO3 (1.5 equiv) at rt. C–C Bond Activation XEC Junichiro Yamaguchi described the synthesis of aryl esters by Ni-catalyzed XEC between O-aryl nicotinic acid (as a O-aryl formyl source) and aryl bromides (Scheme 70).153 The authors propose a transmetalation mechanism (Figure 21B) with C–CO2Ar bond activation. A variety of electrophiles could be utilized in the reaction, including aryl bromides, aryl chlorides, aryl pivalates, aryl carbamates, and arenols. Aryl iodides were less suitable for the reaction. Synthesis of Aromatic Esters by Ni-Catalyzed XEC (2020) (a) With aryl chloride, aryl ester (1.5 equiv), without DMAP. (b) With phenol, aryl ester (3 equiv), dcypt, (15 mol%), KF (2.0 equiv), and without DMAP. Peilin Han, Jinbo Zhao, and Yu Liu report a ring-expansion cross-electrophile coupling of cyclobutanones to form indanones (Scheme 71).154 Interestingly, B2pin2 and base (presumably NaOH) could effectively be used as the reductant in place of metallic reductants. The mechanism is proposed to proceed by C–Br oxidative addition, nucleophilic addition of arylnickel(II) to the cyclobutanone carbonyl, β-carbon elimination, β-hydride elimination, migratory insertion, and protonation to generate the indanone. Synthesis of Indanones by an Intramolecular XEC Involving C–C Bond Cleavage (2022) Synthetic Applications of C(sp2)–C(sp2) XEC Multimetallic Catalyzed Systems In 2012 Banwell and co-workers reported a convergent synthesis of marinoquinoline A that used a Pd-catalyzed cross-Ullman coupling (or XEC) as one of its key steps (Scheme 72).130 It is proposed that the addition of stoichiometric Cu and CuI facilitates the formation of an arylcopper species that undergoes nucleophilic substitution with a C(sp2) palladium intermediate which, following reductive elimination, forms the cross-coupled product.67 Initial attempts utilized 1-iodo-2-nitrobenzene as the coupling partner, but the major product was the homocoupled dimer. When switching to 1-bromo-2-nitrobenzene the authors saw the cross-coupled product in 74% yield. This product was carried forward in the synthesis of marinoquinoline A. XEC of 1-Bromo-2-nitrobenzene with 3-Iodopyrrole-2-carboxaldehyde Towards Marinoquinoline A (2012) Masayuki Inoue and co-workers reported a new synthesis of neurotoxin batrachotoxin in 2017.155 Their method utilizes a palladium and nickel-mediated cross-electrophile coupling of vinyl bromides and vinyl triflates to perform a ring closure (Scheme 73). Initial attempts using only nickel resulted in a yield of 23%, but addition of palladium increased the yield to 68%. The authors note that heating of the reaction to 50 °C was necessary for appreciable yields. Synthesis of Batrachotoxin Using a Palladium and Nickel-Mediated Cross-Electrophile Coupling (2018) Stoltz reported the use of XEC in progress toward the total synthesis of natural products curcusones A–D (Scheme 74).156 The authors attempted more common cross-coupling approaches, but these failed to give product. A Pd and Ni multimetallic system proved optimal and the use of a syringe pump for slow addition of vinyl bromide significantly increased the yield, presumably by suppressing hydrodehalogenation and homodimerization side products. The reaction was scaled up to gram-scale, with the addition of ZnF2 crucial to maintaining high and consistent yields. The authors note this may be due to the Zn(II) salts competitively coordinating to KF and hindering transmetalation step(s). The authors then carried the product forward to construct the tricyclic cores of the diterpenoid natural products. Key Nickel and Palladium XEC Step Used in Studies Towards the Synthesis of Curcusones A–D (2019) The Banwell group reported a Pd-catalyzed XEC of various bromonitropyridines with iodinated iso-levoglucosenone (iso-LGO) to form biologically active molecules (Scheme 75).157 They also made the analogous levoglucosenone-derived compounds. This is a synthetically convenient approach as the densely functionalized iodinated levoglucosenone electrophile can be accessed in just two steps from cellulose. Several of the analogues made in this study displayed potent antimicrobial properties and/or cytotoxicity. Pd-Catalyzed XEC of Vinyl Iodides with Aryl Bromides Used to Form Biologically Active Compounds (2020) In 2020 Banwell and co-workers synthesized a variety of marinoquinoline natural products, in which a Pd-catalyzed XEC was a key C–C bond forming step en route to Aplidiopsamine A (Scheme 76).158 Aplidiopsamine A’s structure was confirmed by single-crystal X-ray analysis and tested for its biological activity as a potential inhibitor of acetylcholinesterase. Pd-Catalyzed XEC Towards Aplidiopsamine A (2020) In 2022, Banwell and Ye disclosed the formal total syntheses of (+)- and (−)-Aspidophytine, of which (−)-Aspidophytine is a biosynthetic precursor to halophytine.159 The authors began the synthetic efforts with cis-1,2-dihydrocatechol, eventually leading to the XEC of an aryl iodide with an α-iodoenone to afford the desired intermediate in 64% yield (Scheme 77). XEC Used in an Initial Synthetic Route Towards the Total Synthesis of (+)-Aspidophytine (2022) C(sp2)–C(sp3) Bond Formation Overview The cross-electrophile coupling of C(sp2) electrophiles, especially aryl, vinyl, and acyl electrophiles, with C(sp3) electrophiles has developed rapidly in the past decade and is the largest section in this review. The pace of development continues to increase and, in early 2024, one new report appears, on average, every 2 days. Increasingly, these approaches are used by chemists for the synthesis of natural products and drug candidates. One reason for the current flowering of the field is that the essential design principles for the reactions have been established (Figure 22).160 In the vast majority of reactions catalyzed by nickel, the “recipe” for a productive reaction is relatively simple: a C(sp2) electrophile that can be activated by nickel through a nonradical mechanism can be coupled with a radical-forming C(sp3) electrophile in high yield, as long as their reactivities are well-matched. The primary challenges involve balancing reactivity and finding the right catalyst capable of the activation steps and the bond-forming steps. It is important to note that, despite the presence of alkyl radicals and the complexities of activating two different electrophiles, very high selectivities can be obtained (>99% cross-selectivity).161 Simplified mechanism for C(sp2)–C(sp3) bond forming cross-electrophile coupling with nickel. This simplification, while enabling reaction development, obscures the fact that many of the key details of these reactions remain under study and debate. While some reactions occur with high selectivity, some reactions are unexpectedly challenging (e.g., the coupling of aryl triflates or alkyl chlorides). A better understanding of the mechanism could be key to overcoming these challenges. For example, the oxidative addition step for first-row metals could occur from several oxidation states (e.g., Ni0 or NiI, Co0 or CoI) and proceed through a variety of mechanisms (Figure 23).79,162−169 In these cases, the essential questions are the ordering of reduction and oxidative addition steps. The intermediate (L)NiII(Csp2)X species does seem likely to be a resting state of the catalyst and accept the radical (often referred to as “radical capture”, but most correctly an oxidative ligation). However, it has been noted that if this species is reduced to (L)NiI(Csp2), it is capable of generating an alkyl radical and regenerating (L)NiII(Csp2)X.170 The radical recombination in this case could be faster than diffusion. Regardless, the resulting (L)NiIII(Csp2)(Csp3)X species seems likely to perform the reductive elimination step.171,172 The (L)NiI(X) species formed by reductive elimination could be reduced, or it could react with one of the electrophiles before being reduced.163,173 The relative reactivity of nickel(0) and nickel(I) with C(sp2) and C(sp3) electrophiles has shown that selectivity is variable and ligand-dependent. The mechanism of radical generation appears to be especially variable and sometimes requires a cocatalyst.50,174−176 Indeed, it is possible that different catalysts and conditions proceed by different mechanisms.177 Even “radical first” mechanisms have been proposed to proceed by (L)NiI(Csp3) intermediates under certain conditions.170,176,178−181 While less commonly invoked, alkylnickel(II) intermediates have been shown to react with aryl iodides to form C(sp2)–C(sp3) bonds.182−187 Further comparative studies on different catalysts and metals are needed to enable further improvement. Mechanisms of oxidative addition of C(sp2) and C(sp3) electrophiles. A number of oxidative addition mechanisms are known for both classes of electrophile. The reliance of most systems on heterogeneous reduction steps (e.g., metal powders, electrode surfaces) or photoredox cocatalysis further complicates the study of these systems. The unknown extent to which side products of the reduction step (especially metal salts) alter catalyst reactivity and the mechanism of this step (electron-transfer or inner-sphere atom transfer) may contribute to discrepancies observed when these reactions are studied under different conditions. For instance, generation of M0 might not be possible for some reductant systems but possible for others or disproportionation/comproportionation mechanisms may be more favorable under certain conditions. A better understanding of these mechanistic features should be widely enabling, and further studies are needed. Our own current understanding of this system is that these reactions are yet another example of the persistent radical (or metal) effect (Figure 24). Initially proposed by Griller and Ingold,188 Liefert and Studer have recently collected the available data and provided modeling studies to demonstrate how this effect works to engender selectivity.112 In summation: what is needed for selective coupling is for the rates of formation of •C(sp3) and (L)NiII(Csp2)X to be about equal and for the homocoupling/decomposition of (L)NiII(Csp2)X to be about 10× slower than the oxidative ligation/reductive elimination step. These parameters can exist for systems with selective electrophile activation steps, but they can also exist for unselective activation. That these conditions can be satisfied under a number of scenarios explains the broad success in the application of this system to a wide array of coupling reactions and the conflicting mechanistic reports. Persistent radical/metal effect for XEC. If the rate of formation of the radical and accepting metal are about equal, then the reaction can be cross-selective as long as the rate of cross-reaction of metal and radical is about 10× the decomposition of the metal species. The rapid development of the area has led to broad improvements in the scope of these reactions, but there are several areas that future studies must address. First, certain alkyl radicals still provide challenges: tertiary radicals are difficult to couple and tend to occur with unacceptable levels of isomerization (10% or more); certain classes of important radicals provide low yields (•CF3), yields with many classes of heterocycles remain low (pyrazoles, imidazoles, isoxazoles); sterically hindered bonds are a challenge generally, and some functional groups are not tolerated (−NO2, −N3, unprotected alkyne, some N–O bonds). Second, high enantioselectivity and diastereoselectivity are possible, but only for select coupling partners (2° benzylic, α-sulfone, α-phosphonate, α-nitrile) and there is significant room to explore this area. Third, cross-coupling with less reactive electrophiles is challenging to achieve with high selectivity and yield (e.g., aryl tosylates, aryl pivalates, aryl chlorides, alkyl chlorides).189 Alkylated Arenes Recently, the medicinal chemistry community has become interested in increasing three-dimensionality from cross-coupling, leading to an explosion in the area of C(sp2)–C(sp3) bond-formation. In particular, Ni-catalyzed cross-electrophile coupling reactions have proven to be particularly well-suited for the construction of these challenging bonds. To this end, the use of cross-electrophile coupling to form C(sp2)–C(sp3) bonds has quickly transformed into an indispensable tool for any practicing organic chemist, resulting in a surge in development of increasingly efficient systems with broader scope. Note that this report is limited to reactions that fit our definition of XEC (Figure 2). A number of equally useful formal XEC reactions were not included, but are cited here for the interested reader.16,55,190−201 The large number of reports has led to a wide variety of reported precatalysts and ligands. In contrast to Ni and Pd-catalyzed cross-coupling reactions, which are dominated by strong σ-donor ligands like phosphines and N-heterocyclic carbenes, cross-electrophile coupling reactions appear to work best with nitrogen ligands (Figure 25). Indeed, 93% of reactions use nitrogen ligands (Figure 26). Although many nitrogen ligands have been reported, the vast majority of reactions utilize bipyridine, phenanthroline, or (for enantioselective reactions) BOX and BiOX ligands. Because the nickel precatalyst is necessarily reduced during the catalytic cycle, a wide array of nickel salts are effective, but nickel(II) precatalysts dominate over nickel(0) precatalysts in number of reports by a wide margin (Figure 27). Differences observed between different precatalysts are likely related to adventitious salts formed during the reduction step (e.g., I– introduced through NiI2 can be helpful for reactions), solubility (anhydrous NiX2 salts have poor solubility), as well as commercial availability and practicality. Ligands used in Aryl–Alkyl C(sp2)–C(sp3) XEC. *Denotes chiral center. Distribution of ligands used in Aryl–Alkyl XEC. “Other” = ligands with 1 report. “Other Class” = ligand classes with <10 reports. Metal sources used in Aryl–Alkyl XEC. NiCl2(dme) = 45 reports. Alkyl Bromides as Electrophiles As noted, the greater commercial abundance of alkyl halide electrophiles in comparison to their nucleophilic counterparts has driven the rise of reports in the cross-electrophile coupling literature that employ them. As a result, alkyl bromides have become the leading choice of alkyl electrophile within the past decade, with 12% of all reactions in this Review utilizing an alkyl bromide as a coupling partner. Among aryl–alkyl bond forming reactions, 36% of all reports involve an alkyl bromide. XEC with Aryl Halides In 2009, Jacobi von Wangelin and co-workers demonstrated an early example of the XEC of aryl halides with alkyl halides (Scheme 78).202 They observed high selectivities for the cross-coupled product in the presence of FeCl3 and noted that dilute reaction conditions minimized biaryl formation. Stoichiometric TMEDA improved cross-selectivity, likely due its role in metal complex stabilization. The conditions tolerate both primary and secondary alkyl bromides, and they also found success in couplings with alkyl chlorides under modified conditions. Time-course experiments revealed that iron catalyzed Grignard reagents formation, but that the Grignard intermediates did not accumulate. It appears that magnesium acts as a “shuttle” for the coupling partners between two different iron centers. Fe-Catalyzed XEC of Aryl Halides with Alkyl Halides (2009) (a) Reaction run for 2 h at 0 °C then at 20 °C for another 2 h. (b) With Mg (1.6 equiv) Mg and TMEDA (20 mol%). In 2010, the Gosmini group reported a cobalt-catalyzed XEC of aryl bromides and chlorides with 1° and 2° alkyl bromides (Scheme 79).203 A survey of ligands found both bipyridine and monodentate phosphines to all be effective, although a 1:1 ratio of CoBr2 and i-Pr2PPh could provide up to 99% yield! Pyridine cosolvent enabled even ligand-free conditions to provide considerable amounts of product. A variety of electron-poor aryl bromides and chlorides reacted well and cyclohexyl bromide coupled in remarkably high yield (96%). Finally, with bipyridine, the coupling of ethyl 4-bromobenzoate with benzyl chloride formed the diarylmethane in 85% yield. Evidence of an alkyl radical intermediate was provided by a cyclopropylmethyl bromide coupling. Cobalt-Catalyzed XEC of Aryl Bromides With 1°, 2° Alkyl Bromides, and Benzyl Chloride (2010) (a) Modified conditions: CoBr2 (20 mol%) and bpy (20 mol%) instead of i-Pr2PPh with alkyl bromide (2 equiv) at 50 °C. (b) Modified conditions: CoBr2 (20 mol%) and bpy (20 mol%) instead of i-Pr2PPh, and alkyl bromide (3 equiv) of Alkyl–Br at 65 °C. Building on our initial report focused on organic iodides (see section 4.2.3.1, Scheme 153),44 we reported general conditions for the coupling of aryl bromides with 1° and 2° alkyl bromides (Scheme 80).41 Key findings in the optimization that have proven broadly useful were the use of more-electron-rich bipyridine ligands (4,4′-MeObpy vs dtbbpy161) and the addition of sodium iodide. For more electron-poor aryl bromides, phenanthroline outperformed bpy-type ligands. While a single ortho-substituent on the aryl coupling partner did not hinder reactivity, 2,6-disubstitution, such as in 2-bromomesitylene, turned off product formation entirely. Couplings with trisubstituted alkenyl halides proceeded well, but terminal monosubstituted alkenes suffered from isomerization. This report had an extensive survey of functional groups and noted several general trends: 1) acidic protons are well-tolerated (−OH, -NHR), π-electrophiles do not react (−CHO), common nucleophilic coupling partners in cross-coupling are unreactive (C–SnR3, C–Bpin, C–SiMe2OH), β-leaving groups on the alkyl partner are tolerated, and arylsufonate esters are unreactive (C–OTf, C–OTs). While an electron-rich protected indole coupled in good yield, 2-bromopyridine provided a low yield. Electron-poor chloroarenes coupled well to primary alkyl bromides, but simple bromobenzene provided only 22% yield. Mechanistically, this report detailed methods to activate the Zn reductant, showed organozinc intermediates were not likely on-cycle, and showed that the reaction rate had a positive dependence on alkyl halide and nickel catalyst concentration, but an inverse dependence on aryl halide concentration. Ni-Catalyzed XEC of Aryl Bromides and Chlorides with 1° and 2° Alkyl Bromides (2012) (a) With alkyl bromide (1.25 equiv). (b) With Phen as ligand. Also in 2012, Hegui Gong and co-workers reported a set of conditions for coupling aryl halides with 1° and 2° alkyl bromides (Scheme 81).204 Early reactions were run at 80 °C but the authors found a significant improvement in yield when lowered to 25 °C in the presence of pyridine. MgCl2 was a key additive, and has multiple roles in activating of the Zn surface and enhancing the rate of nickel(II) reduction. These conditions were general for a range of aryl iodides, bromides, and, in one instance, an activated chloride. The conditions are more suitable for electron-rich aryl coupling partners but still afford moderate yields for their electron-poor counterparts. Functional group compatibility was excellent. Heterocycles like pyridine and quinoline were shown to couple in promising yield. These conditions were also useful for coupling with allylic acetates. Ni-Catalyzed XEC of Aryl Iodides and Bromides with 1° and 2° Alkyl Bromides and Allylic Acetates (2012) (a) With n-BuNBr (1 equiv) added. (b) With allyl acetate (1 equiv). In 2012, Yu Peng and co-workers identified a method for coupling aryl iodides with alkyl bromides both inter- and intramolecularly using nickel cross-electrophile coupling (Scheme 82).205 The authors propose that ethyl crotonate and pyridine are ligated to the resulting nickel(0) complex. In DMF, they observed alkyl dimerization as the major product with near full recovery of the aryl iodide. After switching to MeCN as solvent and increasing catalyst loading, the reaction afforded 60% desired cross-product yield. A range of aryl electronics were tolerated in addition to free phenol. Its utility was demonstrated in the ability to use more complex, chiral structures, relevant to natural product synthesis. The reaction proceeded with moderate success intramolecularly, capable of forming heterocycles such as indolines and tetrahydroquinolines. Initial attempts were made in this report to expand these conditions toward intramolecular alkene difunctionalization (see section 7.1.2.2, Schemes 421 and 422). Intramolecular XEC is still an outstanding challenge, and this remains one of the best reports in this area. Inter- and Intramolecular Ni-Catalyzed XEC of Aryl Iodides with Alkyl Bromides (2012) In 2013, we reported on the scalability of the conditions from our 2012 report41 (Scheme 83).206 The reaction was conducted on 8.33 g (25.5 mmol) of the aryl bromide. The key findings were 1) oxygen is tolerated in the headspace, but too much oxygen leads to incomplete conversion; 2) stirring the heterogeneous mixture works best with a mechanical stirrer in a Morton flask (to induce turbulent mixing). The challenges of mixing on scale are perhaps the largest barrier to scale-up. Example Large-Scale Ni-Catalyzed XEC of an Aryl Bromide with an Alkyl Bromide (2013) A procedure for the cross-electrophile coupling of aryl bromides with alkyl bromides was detailed by Yuehai Shen and co-workers (Scheme 84).207 This report focused on the reaction’s applicability for the synthesis of functionalized natural product intermediates. Inspired by the retrosynthetic possibilities for benzenoid ansamycins, they modified a cross-electrophile coupling reaction to pair bromoanilines with alkyl bromides. They found that using a slight excess of alkyl bromide contributed to a noticeable increase in yield as compared to an excess of aryl bromide. In contrast to previous studies, they found that introduction of MgCl2 or Bu4NBr into the system hindered product formation. To test the reaction’s feasibility in natural product synthesis, they applied their protocol to the preparation of an intermediate toward the synthesis of autolytimycin in up to 60% yield. Ni-Catalyzed XEC of Alkyl Bromides with Amine-Functionalized Aryl Bromides (2014) In collaboration with O’Neill at Pfizer, Molander and Traister were the first to apply a high-throughput experimentation (HTE) approach to optimize XEC reactions with heterocycles of interest to medicinal chemistry in 2014 (Scheme 85).208 A detailed summary of pyridine derivatives, additives, and physical conditions tested are outlined, including a breakdown of product to side products ratios. Key new findings were the use of a protic solvent (MeOH) and the superiority of 4-ethylpyridine to pyridine. This chemistry displayed compatibility with heterocycles, both aromatic and nonaromatic in nature, with modified reaction conditions. Ni-Catalyzed XEC of Aryl Bromides with Unsaturated Heterocycle Alkyl Bromides (2014) (a) Conducted on a scale of 6 mmol with NiCl2(dme) (5 mol%) and phen (10 mol%). (b) Method A conditions: NiCl2(dme) (10 mol%), phen (20 mol%), 4-ethylpyridine (50 mol%), Mn (2 equiv), NaBF4 (50 mol%), and MeOH (0.2 M) at 60 °C. (c) Method B conditions: NiI2 (10 mol%), dtbbpy (10 mol%), 4-ethylpyridine (1 equiv), Mn (2 equiv), MgCl2 (50 mol%), and DMA (0.2 M) at 60 °C. Interested in expanding these reaction types to heteroaryl bromides, Huiyan Liu, Qun Qian, and co-workers described conditions in which secondary alkyl bromides could successfully couple with multifunctionalized bromopyridines (Scheme 86).209 They observed a significant dependence on solvent, requiring DMA for the best results. Both MgCl2 and Bu4NBr were essential additives. They hypothesize that the two additives are crucial for zinc activation but also suggest a coordination effect between MgCl2 and nickel. The reaction appears to tolerate electron-rich pyridines best, with lower yields obtained for −CF3 substituted pyridines. This is an early example showing that Lewis basic nitrogen heterocycles could be a good match for XEC chemistry. Ni-Catalyzed XEC of Halopyridines with Secondary Alkyl Bromides (2014) Also in 2014, our group reported conditions for the coupling of 2-chloropyridines with primary and secondary alkyl bromides (Scheme 87).210 Ultimately, bathophenanthroline (Bphen), a ligand we had in quantity due to a gift from Kodak, proved to be best; reactions with tridentate ligands favored aryl dimer. In comparing Zn and Mn as the reductant, we discovered a bias toward the hydrodehalogenation pathway of the heteroaryl chloride when using Zn, supporting the idea that formation of an arylzinc species is an undesirable, off-cycle pathway. Sodium iodide was again found to be helpful for reactions with more reactive pyridyl substrates. Ni-Catalyzed XEC of 2-Chloropyridines with Alkyl Bromides (2014) With NiBr2•3H2O (10 mol%). Xuefeng Jiang and co-workers reported a Pd-catalyzed intramolecular XEC of aryl iodides with alkyl electrophiles in 2014 (Scheme 88).211 Optimal conditions utilized a dppf-ligated palladium catalyst with added tri(2-furyl)phosphine, base, and LiBr in DMA. There is no explicit terminal reductant, but the authors provided evidence that, at 150 °C, DMA serves this role. The scope is impressive: in addition to indolines, these conditions allowed access to a tetrahydropyridine, a hexahydro-1H-indole, and a hexahydrocyclopenta[b]pyrrole. The isolated aryl oxidative addition Pd(II) complex, when heated in benzene at 100 °C, formed the indoline product in high yield, suggesting that a second oxidative addition is operative (via Pd(IV)). The complementary reactivity of Pd and Ni suggests that further exploration is warranted. Pd-Catalyzed Intramolecular XEC of Aryl Iodides with Alkyl Halides (2014) TFP = tris(2-furyl)phosphine. The formation of all-carbon quaternary centers by cross-coupling is generally challenging. In 2015, the group of Hegui Gong detailed the first XEC approach utilizing tertiary alkyl bromides and primarily electron-poor aryl bromides (Scheme 89).45 MgCl2 was a crucial additive in both sets of conditions they developed. MgCl2 plays a variety of roles including solubilization of nickel intermediates and activation of the zinc surface, which enhances the rate of the reaction. As seen in previous examples, DMAP, or in some instances pyridine, appears to act as the ligand and altered the amount of isomerization (or chain-walking) observed. In their first method, t-BuBr was coupled favorably across a range of aryl bromides, including those that contained ortho-functionalization, aldehydes, and sulfones. While isomerization of tertiary alkyl groups can be an issue,212 most of these reactions occurred with significant retention of the quaternary product. By altering the limiting reagent to be the alkyl coupling partner, more sterically hindered alkyl bromides could also be coupled. However, too much steric bulk, as seen when attempting to use 3-bromo-3-ethylpentane as a coupling partner, drastically reduced reactivity and increased the alkyl isomerization. Ni-Catalyzed XEC of Aryl Bromides with Tertiary Alkyl Halides (2015) (a) Ratio of product with quaternary center to isomerized product given below yields. (b) A = i-Pr-Im-HCl (30 mol%). (c) Pyridine (100 mol%) instead of DMAP. (d) A = t-Bu-Im-HCl (30 mol%). As a way to engage trifluoromethyl containing compounds, Xingang Zhang, Zhong-Xing Jiang, and co-workers described the XEC of α-trifluoromethyl alkyl bromides with aryl iodides (Scheme 90).213 Notably, FeBr2 was a crucial additive for improved reaction outcome. While they were unable to elucidate the role of the iron salts, they attributed its benefits to low valent iron species, which had been shown to form under the presence of manganese.214 A positive correlation was noted between catalyst loading and aryl dimerization: better results were obtained at lower catalyst loadings. Heteroaryl iodides with pyridine, quinoline, and thiophene backbones were shown to be competent coupling partners. Ni-Catalyzed XEC of Aryl Iodides with α-Trifluoromethyl Alkyl Bromides (2015) (a) Ran reaction for 48 h at 50 °C. (b) With NiCl2(dme) (8 mol%) and bpy (9.6 mol%). Inspired by the importance of nitrogen ligands and the relative lack of diversity in this class, we collaborated with Pfizer to explore pharmaceutical compound libraries to find new ligands that could solve challenging coupling reactions (Scheme 91).32 In total, 82 diverse ligands were screened in an XEC model reaction. Using 4,4′-MeObpy as the standard, nine hits were identified, two of which belonged to unexplored structural backbones. Additional pyridyl-2-carboxamidines and (2-pyridyl)-substituted aliphatic N-heterocycles were then mined from the database at Pfizer giving a total of 31 potential ligands to assess. After further testing, pyridyl-2-carboxamidines were identified as the most promising. Pyridine carboxamidine (PyCam) ligands were better than all known ligands for aryl bromides with a coordinating functional group in the ortho-position. A tridentate version, PyBCam, was found to be promising for Lewis basic nitrogen heterocycles. New Ligands for Nickel and Application to the XEC of Challenging Aryl Bromides with Alkyl Bromides (2016) (a) L = MeOPyCamCN, assay yield by GC or UPLC. (b) L = MeOPyCam. (c) L = PyBCam Shaolin Zhu, Yi-Ming Wang, and co-workers reported on a chain-walking XEC reaction in 2017 between aryl and alkyl bromides (Scheme 92).215 Using a modification of their previous conditions with alkenes instead of alkyl bromides, they observed isomerized coupling products indicative of chain-walking processes (i.e., β-hydride elimination to form Ni–H, reinsertion to form different alkylnickel).216 The previous conditions already demonstrated high regioselectivity, up to 17:1 rr, favoring the migratory coupling product but this did not translate to bromides. It was found that n-PrBr was a useful additive to generate the Ni–H species (via β-hydride elimination). In analogy to previous chain-walking reactions, more hindered ligands (6,6′-Mebpy) promoted migration. The scope was just as broad as XEC reactions that proceed without isomerization. Based upon extensive mechanistic experiments, the authors propose an alkyl-first mechanism where the chain-walking happens via an alkylnickel(I) intermediate. Product formation would then proceed by oxidative addition of the aryl bromide to the alkylnickel(I) and reductive elimination to form product. Ni-Catalyzed Chain-Walking XEC of Alkyl Bromides with Aryl Bromides (2017) With NiI2·xH2O as precatalyst. In collaboration with Pfizer and Asymchem Life Science, our group reported general conditions for the XEC of halogenated Lewis basic nitrogen heterocycles with alkyl bromides (Scheme 93).33 This report was the first to systematically address coupling on every position of the pyridine core with variation of the pyridine substitution and electronics. It was found that PyCam and PyBCam ligands were superior for these challenging substrates. Though multiple ligands were assessed, PyBCam, PyBCamCN, and PyCam were the most useful (and are now commercially available). Notably, it was found that homodimerization of the alkyl bromide coupling partner could be overcome by switching to the analogous alkyl chloride, demonstrating a different approach to matching alkyl and aryl reactivity. While the scope was broad, these reactions are less effective for more electron-rich 5-membered azoles such as bromopyrazoles and bromoimidazoles. Ni-Catalyzed XEC of Heteroaryl Halides with Alkyl Halides Enabled by Carboxamidine Ligands (2017) (a) L = PyBCam. (b) L = PyBCamCN. (c) NiCl2(dme) and ligand used in 7 mol%. (d) Used 2.0 equiv of alkyl halide. (e) L = PyCam. (f) Precatalyst of NiI2 used. (g) Run at 40 °C. (h) L = PyCamCN. In 2018, Guoyin Yin and co-workers reported a chain-walking cross-coupling of alkyl bromides and aryl bromides to generate diarylalkanes (Scheme 94).217 The optimal catalyst, like previous chain-walking XEC, featured methyl groups flanking the nitrogen atoms (6,6′-Mebpy and bathocuproine). The alkyl bromides examined were simple n-alkylarenes with halogenation distal to the aryl group. Efficient chain-walking enabled coupling at the benzylic position to form 1,1-diarylalkane products in good yield and high regioselectivity, including the synthesis of three anticancer isoerianin analogues. A gram-scale example (12-fold scale up) was demonstrated with 73% yield and excellent regioselectivity. Ni-Catalyzed Chain Walking XEC of Alkyl Bromides with Aryl Bromides (2018) Ratio of remote-/ipso-products. Martin and co-workers reported the Ni-catalyzed cross-electrophile coupling of aryl bromides and iodides with α-boryl alkyl bromides (Scheme 95).218 While functional group tolerance was excellent and both 1° and 2° alkyl bromides coupled, α-quaternary substrates were unreactive. The authors highlighted the synthetic application of this method by further derivatizing products at the boronic ester using oxidation, Suzuki coupling, and lithiation. An isolated (L)NiII(Ar)Br complex was demonstrated to react with an α-boryl alkyl bromide with or without added reductant, although the coupling yield was higher with Zn. Ni-Catalyzed XEC of Aryl Bromides with α-Boryl Alkyl Bromides (2018) (a) X = Br. (b) X = I. (c) Ni(COD)2 (10 mol%). In 2018, Hegui Gong, Xiaotai Wang, and co-workers published a comprehensive follow-up study (see Scheme 89) on the XEC of tertiary alkyl bromides with aryl halides to form all-carbon quaternary centers (Scheme 96).219 Their previous conditions worked poorly with electron-rich aryl bromides. Switching to aryl iodides and adjusting the ligand (3-fluoropyridine vs DMAP), salt additives (+LiCl), and nickel precursor (Ni(acac)2) resulted in satisfactory yields. DFT calculations and stoichiometric studies suggested the reason that monodentate pyridines work best for tertiary alkyl coupling reactions: pyridine ligands can dissociate to relieve steric congestion and reduce the barrier for reductive elimination. Of particular interest are studies that shed light on the role of MgCl2 and LiCl in forming an active nickel intermediate, solubilization of nickel intermediates, and activation of the zinc surface. Ni-Catalyzed XEC of Electron-Rich Aryl Iodides with Tertiary Alkyl Bromides and Mechanistic Studies (2018) (a) Ratio of retention product to rearranged product. (b) With Ni(acac)2 (20 mol%) instead. (c) With DMF as solvent. (d) With alkyl chloride. Hegui Gong developed conditions for the XEC of glycosyl bromides with aryl iodides (Scheme 97).220 For some substrate pairs, they found that addition of HBr was needed to initiate the reaction, which they attribute to Zn activation. Two sets of conditions were optimized based on the electronics of the aryl iodides used. In general, electron-deficient arenes proceeded with a monodentate amine ligand, while electron-rich arenes required a bidentate ligand to enhance reactivity (at the cost of α/β selectivity). Stoichiometric reactions with arylnickel(II) complexes in the absence of Zn afforded product, supporting a radical chain mechanism. MgCl2 provided improved yields, which may be due a beneficial anion exchange with the Ni complexes, forming more stable bonds.219 The authors attribute the high α-selectivity to sterics and suggest that the anomeric oxygen’s lone pair in α-isomer is aligned to allow for stabilization of the Ni–C bond through donation into its antibonding orbital. They suggest that the lability of DMAP is key to high α/β ratios as well. In this study, they also developed distinct conditions to couple vinyl bromides with glycosyl bromides (see section 4.3.2, Scheme 256). α-Selective Ni-Catalyzed XEC of Aryl Iodides with Glucosyl Bromides (2018) (a) Numbers in parentheses represent α/β ratios. (b) With 20 mol% [Ni], DMAP (80 mol%), trace HBr/AcOH, and DMA/THF (2:3) at 0 °C. (c) With 10 mol% [Ni] and DMAP (40 mol%). (d) With 10 mol% [Ni] and dtbbpy (15 mol%). (e) In DMA/THF (1:4). Hegui Gong, Chuanhu Lei, Jiandong Liu, and co-workers then disclosed the β-selective cross-coupling of glucosyl bromides with aryl iodides to access a variety of C-aryl glucosides in moderate to high yields (Scheme 98).221 In analogy to other Ni XEC reactions, the mechanism is proposed to involve a glucosyl radical intermediate that reacts with an arylnickel(II) intermediate. High β-selectivity is proposed to arise from the steric bulk of the terpyridine ligand, favoring β-attack of the glucosyl radical by nickel. This complements their previous report220 with monodentate pyridine as ligand, which allows for α-selective XEC due to the lability and decreased steric profile of pyridine compared to ttbtpy (see section 4.3, Scheme 257). For electron-rich aryl iodides, MgCl2 was necessary to maintain high selectivity, presumably through activation of Zn for nickel(II) reduction to nickel(0). In addition to a broad scope, this method enabled access to intermediates of pharmaceutically relevant compounds Salmochelin and Canagliflozin. β-Selective Ni-Catalyzed XEC of Aryl Iodides with Glucosyl Bromides (2019) (a) With 1.5 equiv glucosyl bromide and 15 mol% MgCl2. (b) Ratio in parentheses refers to α/β ratio. Merck & Co department of Discovery Chemistry, led by Mennie and Levi, described the alkylation of a complex aryl bromide scaffold to produce a variety of ATP-competitive kinase inhibitor derivatives through XEC (Scheme 99).222 Using a high-throughput screening approach, the authors identified an optimal set of conditions that gave high chemoselectivity and product formation, enabling derivatization of the model aryl bromide with a number of primary and secondary alkyl bromides. Notably, sterically challenging neopentyl coupling was improved significantly using the more reactive iodide. Late-Stage Ni-Catalyzed XEC of a Complex Aryl Bromide with Alkyl Bromides (2020) With alkyl iodide instead. Neopentyl alkyl bromides can be especially challenging substrates for most XEC conditions, usually requiring large amounts of NaI or switching to the neopentyl iodide. Bo Qu and Desrosiers reported that a nickel catalyst with a 5-cyanoimidazole ligand (along with other 2-cyanopyridine ligands) was especially effective for the XEC of aryl bromides with neopentyl bromides (Scheme 100).223 This new catalyst was discovered by mining the large Boehringer Ingelheim compound library for new ligands, using a strategy we had previously developed with Pfizer (Scheme 91).32 Results from structure activity relationship studies showed that the presence and positioning of the nitrile moiety on the imidazole core was crucial for reactivity. Ni-Catalyzed XEC of Aryl Bromides with Neopentyl Bromides Enabled by 5-Cyanoimidazole Ligand (2020) With 2 mmol of aryl bromide. The Chemical Process Development team at Bristol Myers Squibb, led by Beutner and Simmons, evaluated several C(sp2)–C(sp3) cross-coupling methodologies, to form a representative pharmaceutical intermediate (Scheme 101).46 The authors report a variety of conditions, including both cross-coupling and XEC, as well as couplings using alkyl bromides and tosylates. While the authors also attempted photochemical-mediated XEC and XEC with organic reductants, these methods were less appealing, due to lower assay yields or poor commercial availability of the reductant, respectively. While the XEC methods offered advantages over Suzuki coupling methods also explored in this work, the authors attributed major outstanding challenges to the heterogeneous reaction conditions and cost of alkyl halides (relative to the analogous alcohol). Deuterium studies of the electrochemically driven XEC reaction unequivocally demonstrated that the Ar–H side product was derived from β-hydride elimination of the alkyl coupling partner. This is a key finding for the field. The authors conclude the work with a quantitative comparison of all available C(sp2)–C(sp3) catalytic coupling methods and a process chemistry viewpoint on their relative merits and challenges. Process Chemistry Evaluation of XEC Against Various Other C(sp2)–C(sp3) Cross-Coupling Approaches (2021) A breakthrough in the use of tetrakis(dimethylamino)ethylene (TDAE), a homogeneous reductant, for XEC was reported by Hazari and co-workers in collaboration with a Merck team led by Zultanski. Utilizing a cobalt phthalocyanin cocatalyst for radical generation in dioxane greatly broadened the scope of XEC couplings using (dtbbpy)NiBr2 and TDAE (Scheme 102).50 In accordance with literature precedent and their own mechanistic studies,174,224 Co(Pc) was proposed to form the alkyl radical from the alkyl bromide by SN2 followed by homolysis. Branched secondary alkyl iodides and branched benzyl chlorides were successfully coupled in moderate yields, but secondary alkyl bromides were unsuccessful (perhaps due to the SN2 mechanism). As in other cocatalyst systems, the ratio of the two catalysts could be tailored to the substrate pair to optimize the yield. As homogeneous conditions greatly simplify both large- and small-scale chemistry, further advances in this area would be impactful. Homogeneous Nickel and Cobalt Co-Catalyzed XEC of Aryl Halides with Alkyl Bromides (2020) Co(Pc) = cobalt phthalocyanin. (a) With 2 equiv alkyl bromide. (b) With aryl bromide, (c) A = 10, B = 0.5, C = 1.6, (d) With aryl iodide. (e) With 1.6 equiv alkyl bromide. (f) A = 5, B = 0.5, C = 1.4, (g) A = 0.5, B = 5, C = 1.6. (h) A = 5, B = 5, C = 1.4. While the cross-electrophile coupling of glycosides with electron-rich aryl bromides and iodides had been investigated in previous studies, Qun Qian and co-workers noted that further development in this area to include electron-poor aryl halides was needed (Scheme 103).225 As an additional study, they also evaluated a modified version of their conditions to couple glycosyl bromides with electron-rich aryl iodides that had not been previously utilized. These reactions show slight favorability toward the α-product in both methods. Their methods tolerated multiple electron-withdrawing functionalities such as ester and cyano groups. In their scope of electron-rich arenes, ortho-substitution and heterocycles were compatible. Ni-Catalyzed XEC of Aryl Halides with Glycosyl Halides (2021) (a) With DMA/THF (1:4) at 25 °C. (b) Aryl iodide was used. (c) Modified conditions: 10 mol% of Ni catalyst, 15 mol% of ligand, and 100 mol% of MgCl2 in an ice-bath. Parentheses refer to α/β ratio. In 2021, our group, in collaboration with Ying Wang and the Advanced Chemistry Technologies Group at AbbVie, described the application of XEC in 96-well plate format for small molecule library synthesis (Scheme 104).226 Using the ChemBead technology previously developed at AbbVie227,228 problems with weighing and stirring small quantities of metal powders could be solved by using calibrated scoops and a simple plate shaker. Application of XEC to a wide array of challenging heteroaryl halides and alkyl bromides led to the discovery of a new ligand, BpyCam. Out of 222 reactions tested, a 55% hit rate was observed with three different sets of conditions. This compared favorably to other common cross-coupling reactions used at AbbVie. Ni-Catalyzed XEC of Aryl Bromides with Alkyl Bromides in 96-Well Plates Enabled by ChemBeads (2021) (a) Isolated yield on 0.1 mmol scale using ChemBeads. (b) Isolated on 0.5 mmol scale using Zn powder and stir bars. Dawei Teng and co-workers reported a new spirocyclic PyOx ligand for the XEC of aryl bromides with secondary alkyl bromides (Scheme 105).229 The authors highlight the design of the ligand: the pyridyl moiety promoting reductive elimination, the oxazole promoting oxidative addition, and the spiro moiety modulating the ability for the ligand to bind to the metal center. A wide array of secondary heterocyclic alkyl bromides was tested. New Spirocyclic PyOx Ligand for Ni-Catalyzed XEC of Aryl Bromides with 2° Alkyl Bromides (2021) Sawamura, Iwai, and co-workers reported on the design of a “dumbbell-shaped” bipyridines for XEC of aryl bromides with alkyl bromides at low catalyst loadings (Scheme 106).230 The 2,2′-bipyridine ligands featured large triarylmethyl groups at the 5 and 5′ positions and the authors show evidence that these prevent the formation of (L)2Ni and (L)3Ni complexes that might hinder catalytic efficiency. The optimal ligands (depicted in Scheme 106) afforded excellent yields at low catalyst loading (1 mol% [Ni]). These same ligands were also helpful for dual catalytic photoredox Ni and Ir decarboxylative coupling reactions. Dumbbell-Shaped Ligands Enable Ni-Catalyzed XEC of Aryl Bromides with Alkyl Bromides at Low Catalyst Loading (2021) (a) NMR yield. (b) Isolated yield. Shi Tang, Jin-Heng Li, and co-workers reported an unusual 1,4-aryl migration/arylation cascade XEC of α-amino-β-bromo acid esters with aryl bromides (Scheme 107).231 Using DFT calculations, the authors propose that the 1,4-aryl migration occurs via an intramolecular ipso-attack from the β-alkyl radical, forming a spiro 5-membered N-heterocycle bound to a benzene radical. This intermediate then undergoes C–C homolytic cleavage, followed by rearomatization of the aryl group to furnish an α-aminoalkyl radical that is coupled in the usual fashion. The authors employ melamine (2,4,6-triamino-s-triazine) as a reaction additive, and propose it may act as a labile ligand, as the amount of migratory coupling was greatly diminished when melamine was excluded from the reaction. A majority of their scope involves symmetric dibenzyl substituted amines (e.g., R4 = CH2Ar), but the authors see selective aryl migration of the more electron-rich aromatic ring in unsymmetrical dibenzyl substituted amines. Amino acid esters with R4 = Me or H are inefficient substrates in this reaction. Ni-Catalyzed 1,4-Aryl Migration XEC of α-Amino-β-bromo Acid Esters with Aryl Bromides (2021) Browne and co-workers employed ball-milling technique in the XEC of aryl and alkyl bromides and iodides (Scheme 108).232 Using only 3 equiv of DMA as a liquid-assisted grinding (LAG) agent, the method is virtually solvent-free and was successful in the cross-coupling of a variety of aryl halides with primary and secondary alkyl halides in good yields. Although ball-milling is relatively unexplored, this approach is exciting because it can address the problems of using amide solvents and mixing. Mechanochemical Ni-Catalyzed XEC of Aryl Halides with Alkyl Halides in a Ball Mill (2021) (a) With aryl bromide and alkyl iodide. (b) With aryl iodide and alkyl bromide. (c) With aryl iodide and alkyl iodide. Gang Zou, Weijia Shi, and Sisi Wu concurrently reported the coupling of aryl and alkyl bromides using liquid-assisted grinding via ball milling (Scheme 109).233 In addition to evaluating standard reaction parameters, the authors found that optimizing the mechanical conditions, such as rotational speed of the mill, stainless steel ball size and count, and the percentage of the jar that is filled, was crucial for reaction efficiency. Control experiments showed a better water-tolerance under mechanochemical conditions than in previous chemical reports, with the reaction still proceeding under air, albeit with an increased reaction time. The functional group tolerance is wide, particularly with respect to diversity of the aryl coupling partner, and catalyst loading is low compared to other XEC reports. Mechanochemical Ni-Catalyzed XEC of Aryl Halides with Alkyl Halides in a Ball Mill (2021) Using microscale HTE techniques, the Advanced Chemical Technologies Group at AbbVie reported the discovery of di(2-picolyl)amines (DPA) as a new class of ligands for cross-electrophile coupling reactions of aryl bromides and alkyl bromides (Scheme 110).234 The new set of ligands are readily accessible through a single step reaction of commercially inexpensive starting materials. The generality of the new DPA ligands was tested through an HTE approach using 5 different aryl bromides with various electronic properties and 15 different primary and secondary alkyl halides, while using Zn as a terminal reductant (on ChemBeads). The results from HTE suggested that the DPA ligands are effective in most cases and desired cross-coupled products could be obtained. Furthermore, head-to head comparisons of the DPA ligands with dtbbpy were also carried out for selected substrate pairs under identical reaction conditions. For these substrate pairs, DPA ligands gave higher yields compared to dtbbpy in most cases, highlighting the utility of this new type of ligand. These ligands are a rare example of a bidentate, but redox-innocent ligand in XEC. Development of DPA Ligands and Application to Ni-Catalyzed XEC of Diverse Aryl Bromides with Alkyl Bromides (2022) Dawei Teng and co-workers reported the use of one of their spiro-ligands for the cross-electrophile coupling of aryl bromides with primary alkyl bromides (Scheme 111).235 Modification of the previously reported spiro ligand with a CF3 group on the 5-position of the pyridine ring resulted in a improved yields. Using this ligand, a select number of alkyl bromides were successfully coupled with electron-deficient aryl bromides to give the desired alkylated arenes, including the formation of an intermediate toward the synthesis of 5-HT2A agonists. Development of Spiro-PyOx Ligand and Application to XEC of Aryl Bromides with 1° Alkyl Bromides (2022) An attractive approach to alkylated fluoroarenes is the selective alkylation of C–F bonds. Zhuanzhi Shi and co-workers reported the first site-selective defluorinative alkylation of polyfluoroarenes using an XEC strategy (Scheme 112).236 The method achieves selective alkylation at the C–F bond(s) ortho- to directing groups such as 2-pyridyl substituents and imines. A variety of primary and secondary alkyl halides could be successfully engaged in cross-coupling, including examples with methyl and benzylic substrates. Furthermore, the method could be rendered asymmetric by employing a chiral bisoxazoline ligand, and a set of secondary benzylic chlorides were arylated in high yields with good enantioselectivity. An examination of polyfluoroarenes showed that substrates with higher fluorine substitution were most effective for cross-coupling, but substrates with fluoride substitution as low as two could give the desired monofluorinated product, albeit in diminished yields. Mechanistically, the presence of an alkyl radical intermediate was established by the observation of alkylated adducts with 1,1-diphenylethylene. To demonstrate the feasibility of oxidative addition to C–F bonds by Ni(0), the authors isolated and characterized an (aryl)nickel(II) complex from treatment of Ni(COD)2 with a perfluoroarene bearing two pyridyl directing groups. The resulting complex was found to be competent in producing the cross-coupled product in the presence of alkyl bromide under standard reaction conditions. Ni-Catalyzed XEC of Aryl Fluorides with Alkyl Halides by a Directing-Group Approach (2022) With bis((4R,5S)-4,5-diphenyl-4,5-dihydrooxazol-2-yl)methane (BOX-10) (12 mol%) as ligand. Fan Wu, Hegui Gong, and Quan Lin reported a cross-electrophile coupling of heteroaryl bromides with tertiary alkyl halides (Scheme 113).237 Heteroaryls including substituted pyridine, thiophene, quinoline, carbazole, dibenzofuran, and dibenzothiophene were all shown to couple with tertiary alkyl bromides in good yields. It is worth noting that 2-bromopyridines were not tolerated in this reaction. This was explained by the homocoupling byproducts, 2,2′-bipyridines, likely inhibiting the productive catalytic cycle. MgCl2 and LiCl were observed to be crucial for the reaction to occur, and the authors indicated that it was likely that these chloride salts were accelerating the stoichiometric reaction between arylnickel(II) and tert-butyl bromide. As with previous reports with tertiary alkyl coupling, an electronically tuned pyridine ligand played a central role (4-MeOpy). Ni-Catalyzed XEC of Heteroaryl Iodides with Tertiary Alkyl Bromides (2022) Jian Jin and co-workers developed a novel picolinamide derived NNN pincer ligand to successfully couple a variety aryl bromides with alkyl bromides, with a focus on cyclopropyl bromides (Scheme 114).238 The authors hypothesized that most ligands used in XEC are not bulky enough and are too rigid for these types of alkyl electrophiles. They turned toward picolinamide ligands for their sterically congested but flexible nature and adding substituents to the 2-pyridinylmethyl position of the ligand backbone increased the yield of the desired product. The authors explored a large variety of (hetero)aryl bromide coupling partners with a variety of functional groups. Broadly, electron-rich (hetero)aryl coupling partners proceeded with higher yields than their electron-deficient counterparts. Design of Picolinamide Ligands for Ni-Catalyzed XEC of (Hetero)Aryl Bromides with Alkyl Bromides (2022) Chao Li and co-workers developed a C(sp2)–I selective coupling of bromo(iodo)arenes with a variety of alkyl bromides (Scheme 115).178 This reaction proves synthetically useful in combination with other common XEC methods, allowing for iterative routes to more complex structures. Ligand optimization found several trends: (1) tridentate ligands prevented isomerized product formed from tertiary radical rearrangement and (2) more electron rich terpyridine ligands delivered higher yields of the desired cross product. The scope exhibits excellent functional group compatibility with high retention/isomerization ratios, as well as excellent C(sp2)–I selectivity. Based on mechanistic studies, the authors propose that a nickel(I) complex activates the alkyl bromide via an SET process, followed by reduction to generate an alkylnickel(I) complex. This complex then undergoes oxidative addition with bromo(iodo)arene to generate a nickel(III) adduct, which then forms the desired product by reductive elimination. This is a rare example of tert-alkyl bromide coupling with a tridentate ligand (vs monodentate pyridine ligands). Ni-Catalyzed, C(sp2)–I Selective XEC of Bromo(iodo)arenes Iodides with Alkyl Bromides (2023) (a) N-(Pyridin-2-ylmethyl)-4-(trifluoromethyl)picolinamide (10 mol%) was used as ligand. (b) 3 equiv of LiCl was used instead of MgCl2. (c) 2-(2-Pyridyl)imidazole (10 mol%) was used as ligand. (d) With 1 equiv of alkyl bromide. Photochemical and Electrochemical Approaches In 1988, Jutand and co-workers published an electrochemical method to couple aryl halides with α-haloesters in the presence of a nickel catalyst using gold or mercury cathodes (Scheme 116).239 Under these conditions, the typical reductive side-products associated with cross-electrophile coupling were observed including protodehalogenated aryl halide as well as aryl dimer. They had investigated the use of NiBr2(diphos) as the active catalyst, but focused on NiBr2(PPh3)2. Using a solvent mixture consisting either of THF and HMPA or THF and NMP, the group was successfully able to couple both aryl bromides and chlorides with α-bromo- and α-chloroesters. In some examples, yields were further improved with the addition of triethylamine but in other cases this could inhibit catalysis. Electrochemical Ni-Catalyzed XEC of Aryl Halides with Alkyl Halides (1988) (a) Solvent mixture was THF/NMP. (b) Used 4 equiv of aryl halide. (c) Ran with Et3N (4 equiv). (d) Used 1 equiv of both aryl halide and alkyl halide. Perkins, Pedro, and Hansen at Pfizer Process noticed the existing limitations of electrochemical applications in cross-electrophile coupling and, in consultation with our group, developed an approach for the coupling of unactivated aryl and alkyl bromides (Scheme 117).240 Their setup consisted of an undivided cell with an RVC cathode and a Zn anode, and NaI served as both additive and electrolyte. It should be noted that using Fe as an anode also worked well (as precedented in other classes of XEC). In addition to other more usual variables, selectivity could be improved by tuning the current. A variety of standard ligands were compatible: 4,4′-MeObpy as well as MeOPyBCam, PyBCam, and MeOPyCam. In cases where metallic powder reductants afforded low yields, such as in coupling some electron-poor heterocycles, these electrochemical conditions prove beneficial with yields above 50%. Electrochemical Ni-Catalyzed XEC of Aryl Bromides and Alkyl Bromides (2017) (a) Current measured in mA/mmol of Ni. (b) L = MeOPyCam (HCl salt). (c) L = MeOPyBCam (HCl salt). (d) Used 0.075 M NaI as electrolyte. (e) L = PyBCam (HCl salt). (f) Used 2.0 equiv alkyl bromide. Electrochemical reactions most often use a sacrificial anode in an undivided cell for simplicity, but a divided cell offers opportunities for driving XEC with a wide array of anodic processes. In collaboration with our group, Pfizer, led by Hansen, demonstrated an electrochemical XEC of aryl bromides with alkyl bromides in a divided cell utilizing amine oxidation at the anode (Scheme 118).49 Notably, acetonitrile, a more process- and environmentally friendly solvent, could be utilized instead of amide solvents. Finally, echoing early reports on cross-electrophile coupling, the optimal conditions utilized a synergistic mixture of two catalysts (with ttbtpy and dtbbpy as ligands), both of which were not efficient when used alone. The terpyridine favors activation of the alkyl bromide while the bipyridine favors activation of the aryl bromide, and reactivity could be tuned by adjusting the ratio of catalysts (see also Scheme 122).241 Electrochemical Ni-Catalyzed XEC of Aryl Bromides with Alkyl Bromides Using Amine Terminal Reductant in Acetonitrile (2019) (a) Chamber equipped with RVC electrode. (b) L1:L2 = 1:2. (c) L1:L2 = 1:1. (d) L1:L2 = 1:4. Tian-Sheng Mei and co-workers reported the electrochemical chain-walking cross-electrophile coupling of aryl halides with ω-bromoalkyl arenes to give 1,1-diarylalkanes (Scheme 119).242 The catalyst is similar to that used with chemical reductants, possessing steric hindrance around the binding nitrogen atoms. A broad scope of electron-rich aryl bromides and electron-deficient aryl chlorides could be coupled with 1-bromo-3-aryl alkanes with good functional group tolerance. Experimental studies at different constant potentials combined with cyclic voltammetry (CV) studies on individual reaction components led the authors to propose preferential oxidative addition of the aryl bromide followed by radical capture at arylnickel, consistent with previous reports.160 The authors propose a more thermodynamically stable benzylnickel intermediate is formed via β-hydride elimination/reinsertion, followed by reductive elimination to furnish the desired product. Electrochemical Ni-Catalyzed Chain-Walking XEC of Aryl Halides with Alkyl Bromides (2019) (a) X = Br, (b) X = Cl. (c) PMP = 4-methoxyphenyl. Utilizing strategies adapted from the flow battery literature, Sevov and co-workers took advantage of a variety of homogeneous redox shuttles for use as overcharge protection in an electroreductive XEC reaction of aryl iodides with alkyl bromides (Scheme 120).243 As a showcase of the utility of redox shuttles, secondary alkyl bromides gave significantly higher yields with the shuttle than without. The authors propose the shuttle serves as an internal limiter that is enabled when the current exceeds the rate of catalysis. This allows for productive coupling at larger scales (75 mmol) with higher current density (15 mA/cm2) and a minimal decrease in yield, which the authors attribute to increased reaction temperature from increased resistance. Electrochemical Ni-Catalyzed XEC of Aryl Bromides with Alkyl Bromides Enabled by Overcharge Protection (2020) (a) With 2 equiv alkyl bromide and NaI in place of KPF6. (b) With 1.5 equiv alkyl bromide and NaI in place of KPF6. (c) With 2 equiv alkyl bromide and added PPh3 (2.5 mol%). Utilizing mediator-assisted electrocatalytic conditions, the Sevov lab reported the XEC of aryl and alkyl bromides (Scheme 121).39 The authors report a set of catalyst-mediator combinations, comprised of ligands from four separate classes (BPI, BOX, bpy, and PyOX), which the authors propose offers complementary reactivity and stability, and could be used both in electrochemical XEC, as well as in reactions with stoichiometric metal reductants. Combinations where the reduction potential of the catalyst and mediator are well matched resulted in overcharge protection of the catalyst, and, based on mechanistic studies, the authors propose that the mediator is acting as a redox shuttle, rather than a masked form of the operative catalyst. Of these catalyst-mediator systems, the authors found that Ni(MeBPI)OAc/Ni(MeBPI)2 and (BOX-9)NiBr2/Ni(MeBPI)2, which are reduced at the most negative potentials, were the most effective catalyst-mediator systems in the coupling of primary alkyl electrophiles; all four catalyst-mediator systems proved effective in the coupling of secondary alkyl bromides where more common conditions for electrochemical XEC proved ineffective. Electrochemical Ni-Catalyzed XEC of Aryl Bromides with Alkyl Bromides Enabled by Combinations of Catalysts and Overcharge Protectors (2022) (a) With Ni(MeBPI)OAc as (L)Ni and Ni(MeBPI)2 as mediator. (b) With (BOX-9)NiBr2 as (L)Ni and Ni(MeBPI)2 as mediator. (c) With (dtbbpy)NiBr2 as (L)Ni and [(tpy)2Ni](PF6)2 as mediator. Our group reported scalable, greener conditions for the electrochemical XEC of aryl bromides with alkyl bromides (Scheme 122).241 The conditions employ a mixed ligand system to achieve high cross-selectivity, which was found to result from the selective activation of alkyl bromides by ttbtpy and aryl bromides by dtbbpy. An advantage of mixed ligand systems is that the ratio of each ligand can be tuned based on the rate of activation of each coupling partner, enabling higher cross-selectivities. The reaction can be performed in an undivided cell with a nonamide solvent, acetonitrile, and Hünig’s base as the terminal reductant. A broad set of aryl and heteroaryl bromides could be cross-coupled with primary and secondary alkyl bromides in good yields and with good functional group tolerance. Electrochemical Ni-Catalyzed XEC of Aryl Bromides with Alkyl Bromides Under Process-Friendly Conditions (2022) (a) 1:1 ratio of ttbtpy/dtbbpy. (b) 5:1 ratio of ttbtpy/dtbbpy. Sevov and co-workers reported the XEC of secondary and tertiary alkyl bromides with aryl halides and triflates using a dual ligand system under electrochemical conditions (Scheme 123).244 The authors capitalized on the differences in reactivity resulting from pyridyl type ligands and phosphines, in which an electrochemically inactive phosphine-ligated nickel(0) complex can selectively activate aryl (pseudo)halides via a 2 e– pathway, in conjunction with an electrochemically active complex that selectively activates alkyl halides via a 1 e– pathway. The formation of these complexes could occur at mild potentials through a dynamic ligand exchange, allowing for easy control of the redox states of nickel. By employing (bpp)MnCl2, the authors avoided the formation of isomerized byproduct, which was observed when using (bpp)NiCl2 and other first row transition metal bpp complexes. Stoichiometric studies make a convincing case for the ligand exchange process not seen in previous dual-catalyst systems. The substrate scope is particularly broad and among the best reported for these challenging classes of couplings. Again, it is notable that monodentate (pyridine) and tridentate (bpp or tpy) ligands appear to work better for tertiary alkyl radicals than bidentate ligands. Electrochemical Ni-Catalyzed XEC of ArBr/ArCl with 2° and 3° Alkyl Bromides Enabled by Dynamic Ligand Exchange (2022) Merck, led by Bastidas and El Marrouni, utilized either photo- or electrocatalyzed XEC with a variety of alkyl bromides relevant for medicinal chemistry to access novel tedizolid analogues (Scheme 124).245 In studying the photocatalyzed reaction, the authors observed that high light intensity was necessary to achieve high conversion; similarly, for electrocatalyzed XECs, constant voltage showed higher conversion than constant current. In this work, the authors categorized alkyl bromides by coupling efficiency under photo- or electrocatalyzed systems, allowing for some preliminary trends to be observed, such as bromoketones and alkyl fluorides only being tolerated under photochemical conditions. Comparison of Electrochemical and Photochemical XEC Conditions for Coupling Aryl Bromides with Alkyl Bromides (2023) (a) Ir[dF(CF3)ppy]2(dtbbpy)PF6 (1 mol%), Ni(dtbbpy)Cl2•H2O (20 mol%), (TMS)3SiH (1 equiv), 2,6-lutidine (2 equiv), DME, 450 nm, rt. (b) NiCl2(dme) (20 mol%), 4-MeOPyCam (20 mol%), C(−)/Zn(+), 0.5 V, NaI (0.8 equiv), DMA. Wu Li, Aiwen Lei, and co-workers developed conditions for a photochemical XEC of aryl bromides with alkyl bromides, utilizing triethylamine as a terminal reductant and MgCl2 as an additive (Scheme 125).246 While the authors do not propose a potential role for MgCl2, they report a significant decrease in yield in its absence. With Ni(acac)2 and Ir(ppy)2(dtbbpy)PF6, they found reasonable chemoselectivity and no major bias toward electron-rich or electron-poor aryl bromides. Branching secondary alkyl bromides and primary alkyl bromides were both tolerated, giving moderate to high yields. Photochemical Nickel and Iridium Co-Catalyzed XEC of Aryl Bromides with Alkyl Bromides (2016) In 2016, MacMillan and co-workers designed a photochemical approach to XEC of aryl bromides with alkyl bromides that relies upon a silane reductant to handle alkyl radical generation by halogen atom transfer (Scheme 126).43 This photochemical setup operates on the hypothesis that when excited, this catalyst can oxidize bromide to Br•. The Br• can abstract the H atom from (TMS)3Si–H to form the (TMS)3Si•, and (TMS)3Si• abstracts a bromine atom from the alkyl halide to generate Alkyl•. This radical then participates in oxidative ligation with (L)NiII(Ar)Br in the usual fashion. In this mechanism, the iridium catalyst acts both as an oxidant, cultivating the radical generation pathway, and as a reductant to turn over the nickel. Couplings with sterically hindered alkyl partners were generally well-tolerated in addition to a variety of heterocycles. Primary, secondary, and tertiary alkyl coupling partners proceeded successfully in addition to saturated ring systems. Separating the radical generation step from the nickel catalyst has several particularly beneficial effects and this system has seen widespread use. Photochemical Nickel and Iridium Co-Catalyzed XEC of Alkyl Bromides and Aryl Bromides with Silyl-Mediated Radical Formation (2016) (a) Used LiOH in place of Na2CO3. (b) Aryl chloride was used. (c) 10 mol% of Ni catalyst added. (d) Dioxane used as solvent. (e) Reaction ran for 48 h. Concurrently with these other seminal reports, the Vannucci group described a method for the coupling of alkyl bromides with aryl iodides and bromides using photochemical XEC and triethanolamine (TEOA) as the terminal reductant (Scheme 127).247 In XEC conditions under white light, filtering UV and near-UV light with a 400 nm long-pass filter, the authors observed minimal dimerization and good yields of product with a broad range of substrates. While the reaction proceeded well with 1° and 2° alkyl halides, 3° partners were not effective. Throughout this reaction, they observed formation of an insoluble white precipitate, which was characterized as a TEOA halide salt; from this, the authors propose that TEOA, while acting as the reductant, also serves as a halide scavenger. Photochemical Nickel and Iridium Co-Catalyzed XEC of Aryl Bromides with Alkyl Bromides (2017) Used 3 equiv of aryl bromide. Scale-up of heterogeneous and photochemical conditions can be challenging, thus Jensen and co-workers, in collaboration with scientists at Novartis, developed a continuous stirred-tank reactor (CSTR) cascade, demonstrating the technology on a silyl radical-mediated metallaphotoredox cross-coupling of ethyl 4-bromobenzoate and alkyl bromides using an insoluble, inorganic base (Scheme 128).248 Using this technology, the authors showed efficient gram-scale coupling of methyl 4-bromobenzoate in continuous flow (40 mmol/L) with a primary and secondary alkyl bromide in 60% and 80% yields, respectively. Photochemical Nickel and Iridium Co-Catalyzed XEC in Continuous Flow Using a Series of CSTR (2019) (a) Yields determined by HPLC analysis. (b) Yields in parentheses obtained from flow setup. AbbVie Medicinal Chemistry, led by Dombrowski and Gesmundo, compared XEC reactions under heterogeneous metal reductant and photoredox-mediated conditions, as well as redox-neutral cross-coupling analogues (Scheme 129).249 Both reaction methods were tolerant of primary and secondary alkyl bromides, and, when directly comparing the two cross-electrophile coupling methods, the methods afforded complementary reactivity. Overall, this work provides a rare comparative study of XEC reactions against other cross-coupling methods, highlighting the benefits of each method toward synthetic use in medicinal chemistry applications. Comparison of Chemical and Photochemical XEC of “Drug-Like” Aryl Bromides and Alkyl Bromides (2020) (a) Conditions A: Alkyl–Br (2 equiv), NiCl2(dme) (7 mol%), ligand (7 mol%), NaI (25 mol%), Zn flake (2 equiv), TFA (10 mol%), DMA, 60 °C. (b) Condition B: Alk–Br (1.5 equiv), NiCl2(dtbbpy) (0.5 mol%), Ir(dF(CF3)ppy)2(dtbbpy)PF6 (1.0 mol%), 2,6-lutidine (2 equiv), (TMS)3SiH (1.2 equiv), DME, 450 nm LEDs. (c) Ligand = BpyCam. (d) Ligand = PyBCamCN. Another approach to handle the challenges of heterogeneous photochemical conditions was reported by Debrouwer and co-workers. The authors employed a HANU plate reactor as a continuous plug flow system, which employs Continuous processing utilizing an Oscillatory flow with STAtic mixing (COSTA) (Scheme 130).250 This technology was applied to handle a photochemical XEC of methyl 4-bromobenzoate and 4-bromotetrohydropyran at 0.87 g/h. The authors found that the oscillatory flow regime was necessary to successfully maintain stable reactant suspensions. The authors were also able to decrease the reaction time from 6 h in batch to 20 min in continuous flow. Photochemical Nickel and Iridium Co-Catalyzed XEC in Continuous Flow Using COSTA (2020) Pfizer, led by Kölmel and Flanagan, expanded the scope of their previous report to include alkyl bromides in on-DNA cross-electrophile coupling, enabling access to unstabilized alkyl radical precursors (Scheme 131).251 Starting from their previously published conditions, the authors found several key changes to achieve success under the current coupling manifold: (1) PyBCam was crucial for high reaction efficiency and minimization of protodehalogenation of aryl iodide, and (2) inclusion of silanol reductant (TMS)3SiOH, which led to a substantial boost in yield. These mild conditions resulted in the successful XEC of a broad range of aryl iodides with primary and secondary alkyl bromides in good yields and good DNA-compatibility, including the use of a parallel-synthesis format to demonstrate DEL preparation. Photochemical Nickel and Iridium Co-Catalyzed XEC for DNA-Encoded Libraries (2020) Novartis Discovery Chemistry SynTech group, led by Delgado and Tan, developed a lipophilic Ni/Ir dual catalytic system for use in the XEC of aryl halides with alkyl bromides in greener, nonamide solvents (Scheme 132).36 The authors propose that the low efficiency reported for XEC reactions in green solvents can be improved by the incorporation of lipophilic groups to increase the solubility of nickel and iridium catalysts in such solvents as IPAc and EtOAc, leading to the development of the TREE-bpy ligand. Photochemical Nickel and Iridium Co-Catalyzed XEC in Green Solvents Enabled by Lipophilic TREE ligands (2021) Researchers at Merck sought to develop an XEC method that allowed for nucleoside functionalization using a dual catalyst photoredox approach with nickel and iridium (Scheme 133).252 They used halogenated nucleosides with alkyl bromides to achieve C(sp2)–C(sp3) bond formation. Although the optimized conditions employ an iridium photocatalyst, they also noted success with the organic dye 4CzIPN, but longer reaction times. To rule out the possibility of direct radical addition through homolytic aromatic substitution, they performed the reaction without nickel and observed trace product. Four-, five-, and six-membered cyclic alkyl bromides were found to be compatible with these conditions as well as primary alkyl chains. Tertiary alkyl bromides were not applicable in this protocol. Free alcohols were well-tolerated and fluorinated alkyl substrates could be coupled with good yield. Photochemical Nickel and Iridium Co-Catalyzed XEC of Halogenated Nucleosides with Alkyl Bromides (2021) The Noël lab reported a photoredox/nickel dual catalysis system to couple aryl bromides with alkyl bromides (Scheme 134).253 The authors were able to use benzophenone in place of Ir dyes as a photocatalyst along with tris(trimethylsilyl)silane as the terminal reductant and XAT mediator. The tuned benzophenone catalyst is capable of HAT (from the silane to the ketyl radical), avoiding the need to generate Br• by oxidation. The resulting reaction scope is broad with primary and secondary alkyl bromides reacting well with various aryl/heteroaryl bromides to yield modest to good reaction yield. The authors further applied the reaction system to the arylalkylation of tert-butyl acrylate. Given the wide use of the Ir and Ni system and the high cost of Ir, this Ir-free system is an exciting advance. Photochemical Nickel and Benzophenone Co-Catalyzed XEC with Silane Mediated Radical Generation (2022) With tert-butyl acrylate (3 equiv) added as reactant for dicarbofunctionalization reaction. In collaboration with Global Medicinal Chemistry groups of Merck KGaA and EMD Serono, the Kappe, Williams, Eggenweiler and co-workers disclosed a photoredox/nickel XEC reaction of alkyl bromides with thalidomide bromides to provide a streamlined approach to proteolysis targeting chimeras (PROTACs) (Scheme 135).254 While the standard conditions provided good yields for the coupling of lenalidomide bromide and thalidomide bromide with N-Boc-4-bromopiperidine in batch reactions, the heterogeneity resulting from the use of Na2CO3 was a barrier to developing a flow process. Replacing Na2CO3 with a homogeneous organic base, such as 2,6-lutidine, resulted in a slow reaction rate. Finally, by engaging a smaller particle size of Na2CO3 (X50 = 13 μm compared to 116 μm for commercial samples), the batch reaction was successfully transferred to a flow process in an oscillatory flow reactor with increased reaction rate and selectivity. To highlight the utility of the methodology, the authors conducted a 5 mmol scale reaction with an 87% HPLC yield, albeit longer reaction time was needed to reach completion (30 h vs 4 h). Photochemical Nickel and Iridium Co-Catalyzed XEC of Thalidomide Bromides with Alkyl Bromides in an Oscillatory Flow Reactor (2022) The MacMillan lab, in collaboration with the Merck Department of Discovery Chemistry, developed reaction conditions for the synthesis of 1,2,3-trifunctionalized bicyclo[1.1.1]pentanes (BCPs) by selective 2-bromination followed by photochemical XEC with aryl bromides (Scheme 136).255 One initial concern of their work was the high s character of the BCP radical intermediate, which may instead favor protodebromination side product over desired cross-coupling. To circumvent this issue, the authors found that use of solvents lacking weaker, hydridic C–H bonds (e.g., PhCF3), in conjunction with careful control of the reaction temperature, slow addition of the aryl bromide, and a modified silane afforded the desired product in good to high yields. The reaction is tolerant of a wide variety of functional groups, including electron-deficient and electron-rich substituents, as well as acidic functionalities. Photochemical Nickel and Iridium Co-Catalyzed XEC of BCP Bromides with Aryl Bromides (2023) (a) With 10 mol% Ni(dtbbpy)Br2. (b) In PhCF3/t-BuOH. XEC with Aryl Pseudohalides Cornella and co-workers reported the use of heteroaryl thioethers in XEC with alkyl bromides (Scheme 137)256 Heteroaryl thioether substrates can be convenient in multistep synthesis because they act as “protecting groups” for reactive sites on multihalogenated heteroarenes for sequential SNAr reactions. However, thioethers are usually unreactive and must be activated by oxidation to the sulfone. Key to overcoming this low reactivity was identification of dppf as a bidentate, electron-rich ligand that enabled oxidative addition. A variety of heteroaryl thioethers were competent coupling partners with secondary alkyl bromides to give the desired products with good functional group tolerance. In contrast to problematic isomerization observed in previous reports employing dppf as ligand, open-chain secondary alkyl bromides led to exclusively the branched products. Alkylation of the zinc thiolate is not observed, even at 100 °C, perhaps due to strong Zn–S bonding or phase-separation. The ratio of cyclized to uncyclized cross-coupled product in a 5-exo-trig cyclization mechanistic study did not vary with the concentration of catalyst, providing evidence that the alkyl radical is formed and reacts at the same nickel center. Ni-Catalyzed XEC of Aryl Thioethers with Alkyl Bromides (2019) With 3 equiv alkyl bromide at 50 °C. Nishihara and co-workers reported on the decarbonylative reductive alkylation of aroyl fluorides with alkyl bromides (Scheme 138).257 The authors propose that the reaction proceeds through oxidative addition of the aroyl fluoride to nickel(0), followed by alkyl radical capture, decarbonylation, and reductive elimination to generate the product. A number of aroyl fluorides bearing electron-donating and electron-withdrawing functional groups as well as ortho-substituents could undergo decarbonylative coupling with primary alkyl bromides to give the desired products, including one example with a secondary alkyl bromide. Under these conditions, the authors found that neither aroyl chlorides nor alkyl acid fluorides were competent coupling partners. Ni-Catalyzed Decarbonylative XEC of Aroyl Fluorides with Alkyl Bromides (2022) (a) With alkyl bromide (1.5 equiv). (b) With aroyl fluoride (3 equiv). The Gang Zou group developed an XEC reaction to access ortho-alkylated benzamides by coupling benzotriazinones and alkyl halides via a denitrogenation pathway (Scheme 139).258 The authors report addition of KI is essential to ensure good yields, as it is proposed to (1) convert alkyl bromides and chlorides into more reactive alkyl iodides and (2) facilitate reduction of the nickel(II) species to nickel(0). While the optimal condition was at 100 °C, control reactions revealed that the reaction could be conducted at room temperature for a longer reaction time, albeit with a slightly diminished yield. The denitrogenation step was proposed to occur via oxidative addition of 1,2,3-benzotriazinones to nickel(0), followed by the extrusion of nitrogen, resulting in a five membered azanickelacycle intermediate. The report shows high yields with primary alkyl bromides, and a few primary alkyl chlorides also afforded decent yields of the cross-coupled products. Ni-Catalyzed Denitrogenative XEC of 1,2,3-Benzotriazinones with Alkyl Halides (2022) Alkyl Chlorides as Electrophiles XEC with Aryl Halides In 2006, Durandetti, Gosmini, and Périchon reported the cross-electrophile coupling of aryl halides with α-chloroesters (Scheme 140).259 These reactions generally required lower equivalencies of α-chloroester compared to previous methods. Careful selection of temperature (ranging from rt to 70 °C) based on the coupling partners was important for productive reactivity. Adding TFA to activate the Mn reductant resulted in a more efficient reaction. These modified conditions allowed for increased yields among a range of electronically different arenes. When electron-rich substituents are present, aryl iodides provided improved results, whereas electron-deficient aryl bromides and iodides are both compatible. The reaction is compatible with primary α-chloroesters as well, providing access to arylacetates without over arylation. Ni-Catalyzed XEC of Aryl Halides with α-Chloroacetates (2007) Gosmini and Auffrant developed an XEC procedure that relies on a cobalt catalyst, rather than nickel, to catalyze the coupling of benzylic chlorides with aryl bromides (Scheme 141).260 Compared to previous cobalt-catalyzed XEC reactions, the authors were able to use MeCN in place of DMF/pyridine mixtures. Although a dipicolylamine ligand was identified during optimization (and related ligands have since found use in nickel catalysis), ligand-free conditions were equally effective. Slightly diminished yields were observed with electron rich aryl halides. Benzyl chlorides with electron-donating groups were prone to forming bibenzyl homodimers. Cobalt-Catalyzed XEC of Aryl Bromides with Benzyl Chlorides (2016) (a) At 35 °C. (b) At rt. Our group reported on the use of organic reductants in place of metallic powders (Zn, Mn, etc.) in Ni-catalyzed XEC reactions (Scheme 142).34 Metal powders can cause issues on scale-up and generate stoichiometric metal waste. Noting earlier work by Tanaka, on the use of tetrakis(dimethylamino)ethylene (TDAE) in reductive Ni/Cr chemistry,261 we explored the use of TDAE in XEC reactions. TDAE was compared to Zn in various solvents in the XEC of benzyl chloride with aryl iodides. Notably TDAE lead to comparable yields as Zn in DMA, and outperformed Zn when using a variety of nonamide solvents (a common challenge for metal powder reductants). TDAE also outperformed Zn with coupling partners prone to direct metalation (electron-poor pyrimidine and pyrazole). For large scale XEC reactions, liquid reductants enable the reaction to be paused and restarted without any loss in activity by controlling the addition of the reductant.34 Ni-Catalyzed XEC of Aryl Halides with Benzyl Chlorides and Alkyl Bromides with a Homogeneous Reductant (2016) (a) With 2 equiv of TDAE. (b) [Ni]/L = NiBr2(dtbbpy) (7 mol%), Solvent = propylene carbonate. (c) [Ni] = NiI2•xH2O (10 mol%), L = dtbbpy (10 mol%), Solvent = MeCN. (d) With 25 mol% NaI. (e) Reaction run at 60 °C. Hegui Gong, Qun Qian, and co-workers reported a strategy to couple benzyl chlorides with aryl bromides (Scheme 143).262 Two methods were developed: MgCl2 and pyridine were key additives for successful XEC with electron-poor aryl bromides, while KF was identified as the critical additive when electron-rich aryl bromides were employed. The scope encompassed ortho-substituted aryl coupling partners as well as those containing aldehydes and ketones. Unfortunately, no reactivity was seen with heterocycles. Ni-Catalyzed XEC of Aryl Bromides with Benzyl Chlorides (2016) (a) With MgCl2 (1 equiv) and pyridine (1 equiv). (b) With KF (1 equiv). Hazari and co-workers synthesized, characterized, and examined the reactivity of polypyridyl NiI halide complexes in the cross-electrophile coupling of iodobenzene with benzyl chloride using TDAE as reductant (Scheme 144).173 The authors showed that [(dtbbpy)NiICl]2 complex could be synthesized through oxidative addition of an aryl chloride to Ni(COD)2 and ligand. It is proposed to proceed by reductive elimination of biaryl and comproportionation. The resulting complex was competent in alkyl radical generation as demonstrated with trityl chloride, providing support for the proposed role of Ni(I) in the typical radical chain mechanism. However, the dimeric Ni(I) halide complex showed no reactivity toward either iodobenzene or TDAE. Stoichiometric Studies on Nickel Polypyridyl Complexes as Catalysts for XEC (2019) Our group reported the first general XEC of aryl chlorides with alkyl chlorides (Scheme 145).263 The pyridine bis(carboxamidine) ligand class was necessary for productive coupling, with PyBCamCN resulting in the highest yield of cross product and minimal formation of homodimers. A catalytic amount of either bromide or iodide was necessary for successful coupling, which was attributed to a fast, unfavorable halide exchange that increased the reactivity of the alkyl chloride. The addition of zinc and lithium halide salts favored this halide exchange equilibrium, which we proposed to occur via the favorable formation of LiZnCl3, resulting in chloride sequestration. Primary alkyl chlorides were better substrates than secondary alkyl chlorides. Ni-Catalyzed XEC of Aryl Chlorides with Alkyl Chlorides Enabled by Carboxamidine Ligands (2020) With alkyl chloride (1.25 equiv) Yanghui Zhang and co-workers reported a Pd-catalyzed cross-electrophile coupling of aryl iodides with alkyl chlorides in the presence of N-(4-(hydroxymethyl)phenyl)-N-methylacetamide (Scheme 146).264 The reaction works best with a substituted-benzyl alcohol as a terminal reductant in NMP. With these conditions at 85 °C and TBAB as an additive, the group was successful at obtaining dialkylation of ortho-iodoanisole. The reaction mechanism is complex, but good evidence is provided to support oxidative addition to form arylpalladium(II) and cyclometalation onto the OCH2R group. This species might participate in oxidative addition of alkyl halide followed by reductive elimination to form the first coupling product. Dialkylation would involve a second cyclometalation, oxidative addition, and reductive elimination. Electronically diverse aryl iodides were well tolerated and a few heterocycles, namely indole, benzofuran, and indoline, gave moderate yields. In substrates where the meta-position was significantly sterically hindered, only monosubstituted products were formed. Monosubstitution also proceeds in high yield when the nonhalogenated ortho site is functionalized. Pd-Catalyzed XEC of Aryl Iodides and Alkyl Chlorides by a Cyclometalation Mechanism (2021) With K2CO3 (4 equiv) and n-Bu4NBr (2 equiv). Photochemical and Electrochemical Approaches In 1994, a report on the XEC of aryl halides and α-chloroketones was published by Durandetti and co-workers (Scheme 147).265 The group used a variety of equivalencies of α-chloroketone, ranging from 1.2 to 3.9 equiv. They hypothesized that the oxidative addition of the aryl halide to the nickel would be slow, requiring only small amounts of alkyl coupling partner to be present at a time to mitigate competing reactivity. Thus, for these reactions, the α-chloroketone was introduced via slow addition into the electrochemical cells. Running the reactions at 80 °C, the authors were able to see moderate yields for both electron-rich and electron-poor aryl iodides and bromides. The reaction was tolerant of sterically hindered substrates and both primary and secondary alkyl chlorides were compatible. One entry with the coupling of pyridine demonstrated this method’s promise toward forming C–C bonds with heterocycles. Electrochemical Ni-Catalyzed XEC of Aryl Halides with α-Chloroketones (1994) (a) With 2.9 equiv of α-chloroketone at rt. (b) With 3.5 equiv of α-chloroketone. (c) With 2.6 equiv of α-chloroketone. (d) With 2.2 equiv of secondary α-chloroketone. In a seminal publication for the field of XEC, Durandetti, Nédélec, and Périchon reported on the electrochemically driven XEC of α-chlorocarbonyls with aryl halides (Scheme 148).266 In their studies, they found low-yielding reactions suffered from fast production of alkyl dimer followed by slow formation of biphenyl once the alkyl partner had been depleted. A correlation between aryl halide reactivity and the optimal temperature for XEC was observed (more reactive aryl halides work best at lower temperature) and slow addition of the more reactive substrate of the pair improved yields. Primary and secondary alkyl partners, both ketones and esters, reacted effectively to form product. Allylic electrophiles were compatible as well, giving moderate yields. They were also able to collect results for other activated alkyl electrophiles such as benzyl halides. These early trials demonstrated both primary and secondary alkyl halide compatibility as well as tolerance of heterocycles. In addition, in the C(sp2)–C(sp2) coupling 1-bromo-1-propene (initially as a 50:50 mixture of E/Z isomers) with several aryl bromides, the authors report convergence to the (E)-isomer of the cross-coupled product (ratios range from 3:1 to 4:1 E/Z) but did not explore the stereochemical outcome further. This convergence is likely due to increased sterics present in the (Z)-isomer, which are minimized in the (E)-isomer. Electrochemical Ni-Catalyzed XEC of Aryl Halides with α-Chloroketones and α-Chloroesters (1996) MacMillan and co-workers employed a metallaphotoredox strategy in the arylation of α-chlorocarbonyls (Scheme 149).267 The reaction proceeds through the generation of alkyl radical from chlorine atom abstraction by a tris(triethylsilyl)silyl radical, which itself is generated through hydrogen-atom abstraction by bromine radical resulting from oxidation of bromine anion by excited state Ir photocatalyst. The reaction can be applied to a number of electronically activated aryl and heteroaryl bromides to form the corresponding α-arylation products in good yields. A variety of activated alkyl chlorides were effective, including α-chloroesters, amides, and ketones as well as benzyl chlorides. Notably, α-chloro carboxylic acids can also be utilized through in situ masking as the TMS esters. Photochemical Nickel and Iridium Co-Catalyzed XEC of Aryl Bromides with α-Chloroketones and α-Chloroesters by Silane-Mediated XAT (2019) (a) Ir[d(F)(CF3)ppy](dtbbpy)]PF6 as photocatalyst. (b) Na2CO3 as base. (c) [Ir[d(CF3)(Me)ppy]2(dtbbpy)]PF6 as photocatalyst. Merck Discovery Chemistry, led by Brill, described the use of a continuous flow approach for a photochemical XEC of (hetero)aryl bromides with (hetero)aryl benzylic chlorides to give a number of complex medicinally relevant di(hetero)arylmethanes in synthetically useful yields (Scheme 150).268 The authors identified key design features for compatibility in a flow reactor setting and optimized reaction yield, which involved the development of a fully homogeneous system using Bu3N as base in DMA, (TMS)3SiOH as reductant to decrease protodehalogenation of the alkyl substrate, and a residence time of 30 min to maximize workflow efficiency. Using a Vaportec flow chemistry system equipped with an autosampler, the authors successfully prepared two compound libraries to give a total of 23 isolated products. Photochemical Nickel- and Iridium-Catalyzed XEC of Aryl Bromides with Benzyl Chlorides in Flow (2019) In 2020, Tao Xu and co-workers described an XEC approach that utilized dichloromethane as both solvent and methylene source in the formation of diarylmethanes (Scheme 151).269 The authors were able to access the chloromethane radical via single-electron reduction, overcoming the typically inert nature of C–Cl bonds. Attempting the reaction with traditional Zn or Mn reductants led to trace product. The reaction can also be run with CD2Cl2 to afford deuterated diarylmethanes. The authors showed that benzyl chloride is a competent intermediate in this reaction, which presumably forms after the first XEC of the aryl halide and CH2Cl2. Nickel/Photoredox XEC of Aryl Halides with Dichloromethane (2019) With CH2Cl2 (0.25 M). Building upon the works of Hegui Gong220 and Tianning Diao270 in the area of reductive glycoside arylation via nickel XEC, Xia Zhang, Dawen Niu, and co-workers reported a photochemical nickel/iridium XEC of glycosyl chlorides with aryl bromides (Scheme 152).271 Other reductants outside of the optimal Hantzsch ester, such as tris(trimethylsilyl)silane and Zn, as well as inorganics bases, like K2CO3, resulted in diminished yields. Using the most productive conditions, a variety of glycosyl chlorides, derived from galactose, rhamnose, and arabinose (among others), fared well in the coupling and favored the β-products. Both electron-rich and -neutral aryl bromides were tolerated as well as some heterocycles (thiophenes and indoles). It is notable that Hantzsch ester could be used in place of silanes in this system. Photochemical Nickel and Iridium Co-Catalyzed XEC of Aryl Bromides with Glycosyl Chlorides (2021) Alkyl Iodides as Electrophiles XEC with Aryl Halides In 2010, our group reported a cross-electrophile coupling protocol that forgoes the formation of organometallic reagents (Scheme 153).44 Synergy between two different nickel catalysts (derived from dtbbpy and dppbz) was observed: although dppbz was a poor catalyst alone, it improved yields when combined with dtbbpy. The conditions were general for the coupling of a variety of aryl iodides with alkyl iodides and provided promising yields with combinations of iodides and bromides. Esters, nitriles, and ketones were all tolerated, demonstrating the now common orthogonality of XEC to more traditional cross-coupling reagents. Substrates containing free alcohols and other acidic protons also coupled in good yield and ortho-substitution on the aryl substrate did not significantly impede reactivity. Control experiments ruled out the formation of arylmanganese intermediates, and the reaction could proceed with an organic reductant (TDAE). Ni-Catalyzed XEC of Aryl Iodides with Alkyl Iodides (2010) (a) Run at 80 °C. (b) Run at 60 °C. (c) Required 26–37 h. (d) Used technical grade 2-bromoheptane (1.2 equiv). Lei Liu, Bin Xiao, and co-workers described a general approach to enantioenriched α-amino acid derivatives by the XEC of alkyl iodides derived from serine and homoserine with aryl iodides and bromides (Scheme 154).272 Using Bphen as the ligand and NMP as the solvent, this room temperature reaction tolerated a variety of common protecting groups on nitrogen and the acid. Besides simple aryl halides, a few heterocycles were tolerated (pyridine and pyrimidine). The reactions largely proceeded without racemization of the starting material. In addition to aryl halides, acid chlorides could be coupled with similar success. However, swapping the aryl halide for a 1° alkyl iodide resulted in a good yield of C(sp3)–C(sp3) coupled product, but with substantial racemization. The chemistry was also demonstrated on a dipeptide. Ni-Catalyzed XEC of Amino Acid Derived Alkyl Iodides with Aryl Halides (2014) With 2 equiv NaI. Inspired by the pharmaceutical relevance of borazaronaphthalenes, Molander and co-workers targeted C–C bond formation at the 3-position (Scheme 155).273 Previously, they had failed to efficiently form the B–N bond via a cyclization with starting materials prefunctionalized at this position. After encountering challenges using cross-coupling approaches, an XEC approach was explored. Using brominated 2,1-borazaronaphthalenes and alkyl iodides, they developed conditions analogous to their previously described work. The use of degassed solvents was not required. A variety of nonaromatic heterocycles were tolerated as the alkyl coupling partner. Though not compatible with tertiary alkyl partners or other hindered alkyl iodides, significant steric bulk at the boron were handled under these conditions. Alkylation of Bromoborazaronaphthalenes Through Ni-Catalyzed XEC with Alkyl Iodides (2014) Understanding the significance of methylation in medicinal chemistry, Xuebin Liao and colleagues studied the XEC of methyl iodide with aryl iodides/bromides (Scheme 156).274 Typical bidentate amine ligands did not form the desired cross-product and it was hypothesized that these ligands may be undergoing N-methylation instead. Switching to phosphine ligands, they observed improved reactivity with 1,3-bis(diphenylphosphino)propane (dppp) and NaI additive. In addition to tolerating various electronics and ortho-sterics, these conditions are also compatible with aryls containing amides, sulfonamides, aldehydes, and a heterocyclic core. They were also successful in demonstrating their chemistry’s capabilities in CD3-functionalization. Ni-Catalyzed XEC Methylation of Aryl Halides (2016) (a) Used CD3I (7 equiv) as coupling partner with Zn (6 equiv) and NaI (3 equiv). (b) Used CD3I (3.5 equiv) as coupling partner. In a report showcasing photoredox and copper-catalyzed iodolactonization techniques, Wei Li and co-workers demonstrated the XEC of aryl iodides with their iodolactone products (Scheme 157).275 This a potentially challenging reaction because β-carboxylate elimination would open the lactone and is a fast process for many carbanion equivalents. These conditions were tolerant of both electron-rich and electron-poor aryl coupling partners. They also focused on showcasing XEC on the wide range of functionalized iodolactones that could be formed with the methods presented in their paper, such as benzolactones and spirolactones. Applications of XEC in the Formation of C(sp2)–C(sp3) Bonds Between Aryl Iodides and Iodolactones (2018) Murakami, Ishida, and co-workers employed a strained vicinal diol as an organic reductant in the cross-coupling of aryl bromides with alkyl iodides (Scheme 158).276 With these conditions, several aryl bromides bearing sensitive functional groups were successfully coupled with primary and secondary alkyl iodides in good yields. The reductant can be easily synthesized and regenerated after use through photoinduced dimerization of xanthone under natural sunlight, and the energy stored in the form of steric strain is released in the presence of Hünig’s base to enable reduction of Ni(II) to Ni(0). The authors propose that the reaction follows a typical radical chain mechanism with direct replacement of the reductant. Ni-Catalyzed XEC of Aryl Bromides with Alkyl Iodides Using a Homogeneous Organic Reductant (2019) In 2021, scientists at Novartis, led by Fabrice Gallou, Bin Wu, and Ning Ye, published a Ni and Cu cocatalyzed cross-electrophile coupling reaction of aryl bromides with alkyl iodides in water/surfactant mixtures (Scheme 159).277 Stemming from a finding with copper-contaminated aryl bromide, this project found catalytic amounts of copper promoted alkyl transmetalation onto nickel, though its exact role is not defined in this study. These process-friendly, green conditions give rise to successful couplings between primary and secondary, cyclic or noncyclic, alkyl iodides and bromides with aryl bromides of different electronics. Heterocycles, both aromatic and saturated, were compatible, encompassing indoles, benzofurans, and benzothiophenes, among others. The reaction shows chemoselectivity over alkyl and aryl chlorides and tolerates more strained alkyl systems, such as the coupling of azetidines or cyclopropyl rings. This chemistry showcases the compatibility of XEC chemistry with protic solvents, even water! Nickel- and Copper-Catalyzed XEC of Aryl Bromides with Alkyl Iodides in Water, Solvent, and Surfactant Mixtures (2021) Rueping and Huifeng Yue reported the coupling of a variety of C(sp2) and C(sp) electrophiles with α-oxy halides (derived from aldehydes) under three different reduction approaches (Scheme 160).278 The diverse reaction conditions all converge on the use of NiCl2(dme) and 4,7-MeOphen as the precatalyst and ligand. On the basis of DFT and experimental studies, the authors propose that the α-oxy halide is a source of ketyl radical under these coupling conditions. Photochemical, Electrochemical, and Mechanochemical Ni-Catalyzed XEC of α-Oxy Alkyl Halides with Aryl Iodides (2022) (a) Method A: NiCl2(dme) (10 mol%), 4,7-MeOphen (10 mol%), Mn (2 equiv), DMA, rt. (b) Method B: 3CzClIPN (5 mol%), NiCl2(dme) (10 mol%), 4,7-MeOphen (10 mol%), Hantzsch Ester (2 equiv), (n-Bu)3N (5 equiv), DMA, 440 nm LED. (c) NiCl2(dme) (10 mol%), 4,7-MeOphen (10 mol%), TBAPF6 (0.2 M), DMA, Fe rod(+)/ Ni foam(−), 8 mA, rt. XEC with Aryl Pseudohalides To couple alkyl iodides with aryl triflates and nonaflates, Hosoya and Sumida reported a method using Bphen, LiBr as an additive, and a Mn reductant to achieve selectivity (Scheme 161).279 While couplings with electron-withdrawing triflates proceed effectively, their nonaflate counterparts resulted in no detected yield and it was found that, across the board, electron-rich arenes are not compatible with these conditions. A series of aryl nonaflates were tested with alkyl iodides and moderate yields were obtained for both primary and secondary alkyl iodides. This work also briefly covers applicability to alkenyl triflates. Ni-Catalyzed XEC of Aryl Triflates and Nonaflates with Alkyl Iodides (2017) At 80 °C. Photochemical Methods Yatham and co-workers reported the visible-light mediated cross-electrophile coupling of alkyl iodides with aryl bromides (Scheme 162).280 Inspired by reports from the Leonori group that described alkyl radical formation through halogen-atom transfer (XAT) on alkyl iodides by photoredox-generated α-amino radicals for use in metal-catalyzed cross-coupling reactions,281 the authors extended this XAT approach to XEC. Mechanistic experiments support a radical pathway mediated by α-amino radicals as Stern–Volmer experiments that show only n-Bu3N among the reaction components is able to quench excited state 4-CzIPN. A number of aryl and heteroaryl bromides were competent coupling partners with primary and secondary alkyl iodides to give the desired products with good functional group tolerance. XAT-Mediated XEC of Aryl and Heteroaryl Bromides with Alkyl Iodides Catalyzed by Nickel and 4CzIPN (2022) The Barham lab disclosed the XEC of aryl bromides with various electrophiles, including alkyl iodides, aryl iodides and alkenyl iodides, using α-amino radical XAT agents under metallaphotoredox catalysis (Scheme 163).71 Also inspired by Leonori, the authors married XAT radical generation by photoredox-generated α-aminoalkyl radicals with nickel catalysis to develop a variety of XEC reactions with aryl bromides. This strategy was general for a range of different types of iodinated carbon electrophiles and the formation of C(sp2)–C(sp3), C(sp2)–C(sp2) and C(sp2)–C(sp) bonds were all possible. While secondary alkyl iodides and alkenyl iodides coupled well with aryl bromides to form products with good yields, primary alkyl iodides, aryl iodides and alkynyl iodides often suffered from low reactivity with low product yields observed across the substrate scope. XAT-Mediated XEC of Aryl Bromides with Organic Iodides Catalyzed by Nickel and 4CzIPN (2022) (a) 3 Equiv organic iodide was used. (b) Ratio of aryl bromide to organic iodide is 1.5:1. Alkyl Amines as Electrophiles XEC of N-Alkylpyridinium Salts with Aryl Halides and Pseudohalides Watson, Garnsey, and co-workers reported the deaminative cross-electrophile coupling of N-alkylpyridinium salts with aryl bromides (Scheme 164).282 A broad range of aryl and heteroaryl bromides were competent coupling partners with primary and secondary alkylpyridinium salts. In addition, the authors demonstrate a sterically challenging coupling with a tertiary alkylpyridinium salt. To simplify reaction setup, the authors demonstrated a one-pot protocol for direct use of an alkylamine through in situ pyridinium formation without intermediate purification to give the desired product with slightly reduced efficiency. Coupling of Aryl and Heteroaryl Bromides with N-Alkyl Pyridinium Salts via Ni-Catalyzed XEC (2019) With slow addition of pyridinium salt (1 equiv) and aryl bromide (1.1 equiv). Martin and co-workers reported the cross-electrophile coupling of N-alkylpyridinium salts with aryl bromides to give the desired products with good functional group tolerance (Scheme 165).283 The utility of this method was demonstrated through derivatization of amine-containing bioactive compounds such as Mexiletine and Mosapride. Control and radical trapping experiments suggest that alkylpyridinium fragmentation to alkyl radical is likely a Zn-mediated SET process rather than Ni-mediated. Ni-Catalyzed XEC of Aryl and Heteroaryl Bromides with Primary and Secondary Pyridinium Salts (2019) At 45 °C. Hong Yan, Yi Wang, Jianlin Han, and co-workers reported the deaminative cross-coupling of N-alkylpyridinium salts with aryl iodides (Scheme 166).284 Primary, as well as some secondary, alkylpyridinium salts were competent coupling partners. A one-pot protocol was demonstrated with one example to provide the desired product with essentially no loss of efficiency. The authors applied this method to the synthesis of an advanced common intermediate toward the natural products (+)-compactin and (+)-mevinolin in two steps in 55% yield, which was previously synthesized in ten steps in lower yield. In Situ Generation of N-Alkyl Pyridinium Salts for Ni-Catalyzed XEC with Alkyl Halides (2019) Molander and co-workers demonstrated the deaminative cross-electrophile coupling of N-alkyl pyridinium salts with aryl bromides using a metallaphotoredox strategy (Scheme 167).285 While iridium photocatalysts were equally effective in promoting cross-coupling, 4-CzIPN was chosen as the optimal, more affordable option. Aryl and heteroaryl bromides of varying electronics bearing sensitive functional groups were effective coupling partners with several cyclic and acyclic alkyl pyridinium salts. Stern–Volmer quenching studies indicate that direct SET reduction of the pyridinium salt by excited state 4-CzIPN is possible, but further studies would be needed to rule out reduction by nickel. Nickel/Photoredox XEC of Aryl Bromides with N-Alkyl Pyridinium Salts Using 4-CzIPN (2019) Cavallo, Rueping, and co-workers reported on the deaminative cross-coupling of N-alkylpyridinium salts with aryl halides (Scheme 168).286 A number of aryl and heteroaryl bromides and iodides bearing groups of varying electronic effects provided the cross-coupled products in good yields. Both cyclic and acyclic alkylpyridinium salts were viable coupling partners. Notably, primary alkylpyridinium salts were also suitable for deaminative cross-coupling, and even methylation was viable under these conditions. Coupling of Aryl and Heteroaryl Halides with N-Alkyl Pyridinium Pyridinium Salts via Nickel XEC (2019) (a) X = I, (b) L = ttbtpy. (c) X = Br. (d) L = bpy. Hazari, Uehling, Zultanski, and co-workers developed a family of tetraaminoethylene-based reductants with improved stability and a range of reduction potentials compared to TDAE (Scheme 169).51 The authors designed a three step synthesis of the air-stable solid reductants that are conveniently purified through filtration and washing under air, a stark contrast to the rigorously air-free conditions required for purification of TDAE. Using the range of reduction potentials to their advantage, the authors demonstrate fine-tuning of electron-transfer in several cross-electrophile coupling reactions between aryl halides and alkyl bromides or pyridinium salts. In fact, the reductant with the lowest potential enabled the first general cross-coupling of highly reactive benzylpyridinium salts and aryl iodides to give a variety of diarylmethanes in good yields and with good functional group tolerance. Ni-Catalyzed XEC of Aryl Iodides with Benzylic N-Alkyl Pyridinium Salts Using a Homogeneous Organic Reductant (2021) With 20 mol% (dtbbpy)NiBr2.. In collaboration with Dion and Kalyani at Merck, Watson and co-workers reported a method to synthesize noncanonical amino acids through the XEC of N-alkylpyridinium salts with aryl bromides (Scheme 170).287 These conditions employ amino acids with terminal amine side chains, enabling the synthesis of enantioenriched products from chiral pool materials. While substrates containing amides were tolerated, others containing acidic hydrogens (phenols, carboxylic acids, etc.) reacted poorly. The authors were motivated to undertake a high-throughput experimentation (HTE) approach to address these limitations. Using 96-well (μmol scale) and 1536-well (100 nmol scale) set-ups, they studied a range of parameters and found additional complementary reaction conditions that gave promising yields. Modified conditions with Zn or Mn better tolerated acidic functionality than the first set of conditions, possibly due to the inherent basicity of TDAE. However, the original TDAE conditions gave the highest yields across the broadest range of coupling partners. The stability of the N-alkylpyridinium amino acids allowed for solid-phase peptide synthesis where this functionality was carried through. XEC could be successfully performed on the peptide products, even before cleavage of the resin. Ni-Catalyzed XEC of Amino Acid-Derived N-Alkyl Pyridinium Salts with Aryl Bromides (2023) (a) Modified conditions: NiBr2(diglyme) (10 mol%), PyBCam•2HCl (12 mol%), Mn (2.0 equiv), and DMPU (0.1 M) at 80 °C. (b) Modified conditions: aryl bromide (2.5 equiv), NiBr2(dme) (60 mol%), PyBCam•2HCl (72 mol%), Zn (3.0 equiv), TBAI (1 equiv), Boc-Trp-OMe (1 equiv), DMA at 80 °C. Our group reported the decarbonylative XEC of carboxylic acid substrate pools (as the aryl 2-pyridyl ester) with alkylamine substrate pools (as the N-alkylpyridinium, Scheme 171).288 Through stoichiometric reactions and 13CO labeling studies, we found that oxidative addition and decarbonylation of the aryl pyridyl esters is fast and reversible. 2-pyridone acts as a ligand to promote decarbonylation and stabilize the resulting arylnickel(II) complex. As with other reports in this area, elevated temperature was necessary to effectively remove CO from the reaction system and disfavor ketone formation. The conditions were also compatible with alkyl halide coupling partners. We successfully applied this strategy to efficiently form C(sp2)–C(sp3) linkages on proteolysis targeting chimera (PROTAC) anchors. Ni-Catalyzed Decarbonylative XEC of Carboxylic Acid Esters with N-Alkyl Pyridinium Salts (2023) Modified conditions: alkylpyridinium (1.5 equiv), NiI2 (20 mol%), 4,4′-MeObpy (20 mol%), Mn (2 equiv), THF/DMA (1:1) at 110 °C. Concurrently, the Cernak lab developed the decarbonylative XEC of the same substrate pools, coupling N-acyl glutarimides with N-alkylpyridinium salts at relatively low temperatures (Scheme 172).289 Using the latest in HTE optimization, the authors found that a stoichiometric phthalimide additive enabled high yields. DFT calculations and mechanistic studies ruled out the phthalimide undergoing a transamidation reaction prior to XEC. The authors suggest that phthalimide may be assisting in prevention of nickel oligomerization or the formation of an off-cycle N-acyl-imide nickel complex. Electron-rich aryl acids were generally lower yielding under these conditions, favoring the ketone product instead. In the coupling with benzyl and secondary N-alkylpyridiniums, the authors found that addition of RuCl3 and GaCl3 reduced the amount of ketone byproduct and improved the yields for the decarbonylated product in the process. Ni-Catalyzed Decarbonylative XEC of Aryl N-Acyl-Glutarimides with N-Alkyl Pyridinium Salts (2023) Modified conditions: NiBr2(dme) (20 mol%), 5,5′-CF3bpy (20 mol%), Mn (2 equiv), phthalimide (2 equiv), RuCl3 (50 mol%), GaCl3 (50 mol%), NMP at 40 °C. XEC of Ammonium Triflates with Aryl Pseudohalides Xing-Zhong Shu and co-workers described the use of benzyl ammonium triflates in deaminative cross-coupling with aryl triflates (Scheme 173).290 This report marks one of the first combinations of C–O and C–N electrophiles for C–C bond formation in cross-electrophile coupling. The method was successful in providing a variety of diarylmethane products in good yields. Radical trapping and radical clock experiments indicate the involvement of benzyl radical from C–N bond fragmentation, rather than through an oxidative addition mechanism with Ni. Ni-Catalyzed XEC of Aryl Triflates and Benzylic Ammonium-Functionalized Substrates (2019) Electrochemical and Photochemical Approaches Ming Joo Koh and co-workers reported a photochemical approach to cross-couple primary and secondary N-alkylpyridinium salts with aryl bromides (Scheme 174).291 Aryl bromides of various electronic profiles were tolerated in addition to substrates with sensitive functionalities like aldehydes and free alcohols. Both cyclic and acyclic secondary alkyl coupling partners coupled in moderate to high yield. Saturated heterocycles fared well and a few compounds, derived from bioactive precursors, were formed efficiently. They also described a few examples of alkyl–alkyl coupling using the same class of substrates. A few mechanistic experiments were conducted to test for the presence of a radical and for the intermediacy of an organonickel species; all results obtained do support these claims. Their proposed mechanism first involves the photoexcitation of Hantzsch ester which forms an EDA complex with the N-alkylpyridinium salt. After an SET step, the alkyl substrate undergoes fragmentation of the pyridinium group to form an alkyl radical which can then enter the nickel catalytic cycle. Coupling Aryl Bromides with N-Alkylpyridinium Salts Through Nickel XEC (2021) With NiBr2(dme) (10 mol%), dtbbpy (12 mol%), Et3N (3 equiv), and 1.5 equiv of the pyridinium salt. Youai Qiu and co-workers report the synthesis of β-arylethylamines by electrochemically driven XEC of aryl aziridines and aryl bromides (Scheme 175).292 The resultant coupling has high chemo- and regioselectivity. A broad range of electronic differences about the aryl bromide are tolerated, but electron-deficient aryl bromides typically outperformed electron-rich aryl bromides. With respect to the aryl aziridine, a broad range of functional groups were tolerated, including sterically hindered mesityl aziridine. From CV studies, the authors propose that neocuproine may be acting as a single-electron transfer mediator for the reduction of aryl aziridines, which generates a benzyl radical intermediate as the active species. Coupling of Aryl Bromides with Tosyl-Protected Aziridines Using Electrochemically-Driven Nickel XEC (2023) GF = graphite felt. Alkyl Alcohols as Electrophiles XEC of In Situ Activated Alcohols with Aryl Halides and Pseudohalides Using a cobalt-based cocatalyst, we reported a pathway for the generation of benzylic C–C bonds through XEC (Scheme 176).174 This method relies on the ability of Co(Pc), cobalt phthalocyanine, to generate benzyl radicals from benzylic mesylates; under optimized conditions, the mesylate is formed in situ from benzylic alcohols using methanesulfonic anhydride. Functional groups sensitive to organometallic reagents such as aldehydes and ketones are tolerated under this method. Added steric effects on the alcohol did not hinder reactivity and the conditions could be transferred to a vinyl bromide with similar success. With increased catalyst loading and temperature, benzyl diethyl phosphates could be employed in this reaction. A preliminary enantioconvergent coupling to α-chloroethylbenzene using a chiral bis(oxazoline) ligand was also reported in 41% yield and 43% ee. Cobalt- and Ni-Catalyzed XEC of Aryl Halides and Benzyl Alcohols Through In Situ Mesylate Formation (2015) With 3 mol% Co(Pc) and at 60 °C. Ukaji and Suga reported the Ni-catalyzed cross-electrophile coupling of aryl iodides and benzyl alcohols with a Ti cocatalyst (Scheme 177).175 The conditions tolerated benzyl alcohols bearing electron-withdrawing and donating groups as well as reactive functional groups such as triflate and chloride but was limited to primary benzyl alcohols. Mechanistic experiments showed that a benzyl titanate is formed during the reaction, which is solely responsible for benzyl radical generation without involvement of Ni. Titanium-Assisted Ni-Catalyzed XEC of Aryl Halides with Benzyl Alcohols (2018) With aryl bromide (3 equiv) instead of aryl iodide. Xing-Zhong Shu and co-workers demonstrated the ability to employ both nickel and Lewis acids for the coupling of aryl bromides with allylic alcohols (Scheme 178).293 The chosen Lewis acid, ZrCl4, allows for effective activation of the alcohol via chelation. With no Lewis acid, they observed significant aryl dimer and no cross-product. Interestingly, these conditions use Ni(dppp)Cl2 as their nickel precursor but have 2,2′-bipyridine as their active ligand. Additionally, NiBr2(dme) was used for sterically hindered aryls. The reaction proved chemoselective toward bromides over chlorides and couplings with heterocycles were also possible. Aryl coupling partners with free alcohols and amines performed well in this protocol, as did both primary and secondary allylic alcohols. Mechanistic studies were conducted to elucidate the role of the Lewis acid, the kinetics and order of oxidative addition, and the possibility of a radical-containing process. Employing Lewis Acids Alongside Nickel in the XEC of Aryl Halides with Allylic Alcohols (2018) With 15 mol% Ni(dppp)Cl2. Chao Li and co-workers published an electrochemically driven cross-coupling method to form C(sp2)–C(sp3) bonds from alkyl alcohols and aryl bromides (Scheme 179).294 The reaction takes place in an undivided cell at a constant current of 4 mA with a graphite anode and nickel foam cathode. Under these conditions, alkyl bromide is generated in situ via an Appel reaction between Br2 and the triphenylphosphine-activated alcohol. They suggest that molecular bromine can be generated on the anode from bromide ions in solution. This reaction tolerates a variety of functional groups including protected amines, benzylic heterocycles, and ethers and can be used for primary or secondary alcohols. Additionally, heterocycles, such as indoles, carbazoles, and indazoles, can be functionalized. As an initial test, they also showed the coupling of a secondary alcohol with a vinyl bromide. Electrochemical Ni-Catalyzed XEC of Aryl Bromides with Primary and Secondary Alcohols (2021) (a) With 7 equiv of PPh3. (b) With 3 equiv of PPh3. Zhong-Xia Wang and co-workers reported the coupling of aryl chlorides with allylic alcohols (Scheme 180).295 The authors employ MgCl2 to activate the allylic alcohol toward oxidative addition to the arylnickel(II) complex, resulting in the formation of an η3-allylnickel(III) complex. 1,3- and 3-substituted allylic alcohols coupled effectively to furnish the (E)-configurated products, and a variety of functional groups were tolerated on both coupling partners. Nickel-Catalyzed XEC of Aryl Chlorides with Alkyl Alcohols (2021) With 4,4′-NH2bpy as ligand. Hegui Gong, Guobin Ma, and Quan Lin reported a method, which employed a halogenation strategy developed by Mukaiyama, to couple primary and secondary alcohols with aryl bromides (Scheme 181).296 This method involves a preactivation step, using 2-chloro-3-ethylbenzo[d]oxazol-3-ium (CEBO) and TBAB to generate alkyl bromides after which an aryl bromide is added with NiCl2(Py)4, dtbbpy, zinc, and MgCl2 to initiate the XEC. CEBO is precedented in chlorination and this activation was near quantitative and fast in MeCN. The scope includes substrates with amides, saturated heterocycles, and macrocycles. They also show diastereoselective examples with >20:1 dr as well as examples where heterocycles were compatible. In their trials with diols, they show effective coupling even under the presence of free alcohols in addition to examples of diarylation when an excess of brominating agent is utilized. In Situ Generation of Alkyl Bromides from Alcohols for XEC with Aryl Bromides (2021) (a) Conditions: [Ni] = NiCl2(Py)4 (10 mol%), L = dtbbpy (10 mol%), and MgCl2 (2 equiv). (b) Conditions: [Ni] = NiCl2(Py)4 (5 mol%), L = dtbbpy (30 mol%), and MgCl2 (2 equiv). (c) Conditions: [Ni] = Ni(acac)2 (10 mol%), L = 3,4,7,8-MePhen (10 mol%), LiI (75 mol%), DMPU, 60 °C. Our group reported the in situ bromination/cross-coupling of unactivated aliphatic alcohols with aryl bromides (Scheme 182).297 Employing Hendrickson’s POP reagent in the presence of a bromide source and base, we quantitatively generated alkyl bromides from alcohols within a minute. The resulting mixture could be directly used in subsequent cross-coupling with aryl bromides without purification steps. The identification of an appropriate in situ bromination reagent was crucial to ensure compatibility of byproducts with the Ni-catalyzed cross-coupling step. A combination of dtbbpy and t-BuBpyCamCN as ligands were found to be necessary for productive catalysis, in which dtbbpy was important aryl bromide activation whereas t-BuBpyCamCN was key to alkyl bromide consumption. A variety of aryl and heteroaryl bromides were competent coupling partners with a diverse set of primary and secondary alcohols, including the deoxygenative arylation of the prostaglandin precursor Corey lactone and medicinally relevant compounds such as Paraxol, the core of tedizolid, and a tropine derivative. Ni-Catalyzed XEC of Aryl Halides with Primary and Secondary Alcohols Through an In Situ Bromination Strategy (2022) With t-BuBpyCamCN (10 mol%) and no dtbbpy. Xing-Zhong Shu and co-workers reported the deoxygenative cross-coupling of benzyl alcohols with aryl triflates (Scheme 183).298 Free benzylic alcohols are activated in situ as redox-active oxalates, via transesterification with dimethyl oxalate (DMO), which undergo fragmentation to benzylic radicals upon SET. When employing heterobenzyl alcohols, the authors found that the addition of AlCl3 was necessary for successful coupling; mechanistic studies show that AlCl3 may enhance reactivity of aryl triflates and/or slow down the transesterification of alcohols to form oxalates, resulting in better matched rates of reactivity. In subjecting both coupling partners to a preformed nickel(0) complex, the authors observed a higher percentage of benzyl homodimer and protodefunctionalization side products over the analogous aryl triflate side products, implying that the benzyl oxalate is first to react with the nickel complex in a catalytic system via a radical type pathway. Ni-Catalyzed XEC of Aryl Triflates with Benzyl Alcohols (2021) With NiBr2(diglyme)(10 mol%) as catalyst, pyridine (10 mol%), and AlCl3 (10 mol%). Huifei Wang, Hongze Liang, and co-workers detailed the cross-electrophile coupling of aryl phosphonium salts and allylic alcohols using a nickel catalyst and a Lewis acid for alcohol activation (Scheme 184).299 When investigating Lewis acids, LaCl3 was shown to give poor yields but excellent cross-selectivity. Ultimately, they found that a mixture of ZrCl4 and LaCl3 balanced both aspects well. Both electron-rich and electron-poor arenes displayed compatibility with these conditions, in addition to ortho-substituted aryl substrates. Heterocycles, such as dibenzofuran, pyridine, and indole, were effectively coupled, generally in yields above 60%. They attempted to apply these findings to couple benzothiazole derivatives with allylic carbonates under slightly modified conditions using a Josiphos ligand. These initial results demonstrated successful coupling with both electron-rich and electron-poor benzothiazoles. Ni-Catalyzed XEC of Allylic Alcohols and Aryl Phosphonium Salts (2021) Modified conditions for allylic carbonates: Josiphos (20 mol%) used as ligand, Mn (3 equiv), no ZrCl4 or LaCl3 added, and rt. From methyl 3-butenoate. XEC with Alkyl Sulfonates The Molander group adapted their previous findings to encompass more readily available alkyl coupling partners, (Scheme 185).300 Envisioning an alcohol preactivation step, they described a pathway in which alkyl tosylates could be coupled with aryl bromides. They found that pyrrolidines, piperidines, and tetrahydropyrans among other nonaromatic heterocycles were compatible. When attempting a coupling with the respective mesylates, reactivity was still observed although at lower yields. Similarly to other proposals, they suggest one role of KI is halogen exchange with the alkyl tosylate, forming an alkyl iodide. They also propose that this additive may serve as an intermediate stabilizer or bridging ligand within the nickel cycle. Ni-Catalyzed XEC of Heteroaryl Bromides and Heterocyclic Alkyl Tosylates (2015) Run on a 3.0 mmol scale. Inspired by developments in cocatalyzed nickel and cobalt cross-electrophile coupling, Komeyama and co-workers described a method in which vitamin B12 (VB12) could act as a suitable replacement for other previously used cobalt cocatalysts (Scheme 186).301 They were interested in the couplings of aryl halides with alkyl tosylates and found a dependence of alkyl tosylate consumption on the presence of VB12 while aryl halide consumption was controlled by the nickel catalyst. Furthermore, VB12 outperformed a variety of other cobalt cocatalysts. The KI additive enhanced yields, although the reaction still proceeded without added iodide. The reaction was compatible with aryl iodides and bromides, and an example of an electron-deficient aryl chloride was also included. XEC of Aryl Halides with Alkyl Tosylates Using Nickel and Vitamin B12 Co-Catalysis (2017) Hegui Gong, Jianhong Zhao, and Jiawang Wang disclosed a methylation technique in which aryl bromides and tosylates could undergo Ni-catalyzed XEC with methyl tosylate (Scheme 187).302 The methods vary widely from bromides to tosylates, requiring careful selection of reagents and catalyst loadings in almost all aspects. When using aryl bromides, they observed a strong dependence on TBAI and MgCl2 for reactivity. The reaction covers a wide range of electronically diverse substrates and is successful with hindered arene coupling partners. More sensitive functional groups are tolerated, such as alkenes and boronate esters, and heterocycles could also be coupled. To increase the generality of their system and include substrates derived from phenols, they describe a second set of conditions that can be used with aryl tosylates. The scope here is relatively similar but also allows for the methylation of sterically congested substrates with 2,6-di-ortho-substitution. Ni-Catalyzed Methylation of Aryl Halides and Tosylates with Methyl Tosylate (2017) (a) Conditions A: NiI2 (5 mol%), 4,4′-Mebpy (7 mol%), Zn (2 equiv), MgCl2 (1.5 equiv), and TBAI (1 equiv) at rt. (b) Conditions B: NiI2 (10 mol%), 4,4′-Mebpy (15 mol%), and MeOTs (2 equiv). (c) Conditions C: NiCl2(dme) (10 mol%), dppf (20 mol%), Zn (6 equiv), LiCl (6 equiv), and TBAI (1.5 equiv) at 40 °C. Gosmini, Auffrant, and co-workers reported a cobalt-catalyzed XEC of aryl bromides and iodides with benzyl mesylates (Scheme 188).303 The protocol can also be streamlined to start from the benzyl alcohol without isolation of the mesylate, although a centrifugation step prior to XEC was needed to remove ammonium salt byproducts. Aryl halides with various electronics could be coupled. The mechanism is proposed to undergo initial reduction of CoII salt to catalytically active CoI species, which reacts with the aryl bromide to form a CoIII complex. This complex undergoes reduction by Mn and subsequent capture of a benzyl radical from benzyl bromide, which was detected in the reaction (in situ generated from the mesylate). Cobalt-Catalyzed XEC of Aryl Halides with Benzylmesylates (2018) (a) With aryl bromide. (b) With aryl iodide. (c) Telescoped from benzyl alcohol without isolation of the mesylate. Hanessian and co-workers reported the XEC of bromoisoquinolones with alkyl tosylates to introduce saturated heterocycles, as well as acyclic aminoalkyl moieties, at the C-6 and C-7 positions of the isoquinolone core (Scheme 189).304 The authors report good yields and high diastereoselectivity in coupling chiral azacyclic tosylates, and were able to translate this to the coupling of a sugar derivative, albeit in low yield. Acyclic amino acid derived tosylate coupling partners were also successful but saw decreased yield and diastereoselectivity. While the authors do show that KI and 4-ethyl-pyridine are necessary additives for improving reaction selectivity, the exact role is not concretely understood. Ni-Catalyzed XEC of Bromoisoquinolones with Alkyl Tosylates (2020) XEC with Epoxides In 2014, our group reported a cross-electrophile coupling strategy with epoxides as coupling partners (Scheme 190).305 While initial conditions favored terminal insertion to afford the secondary alcohol, the addition of a titanium cocatalyst under modified conditions flips regioselectivity and favors ring-opening at the more hindered site. Adding NaI improved the rate of formation of cross-product, but the reaction reaches comparable yields with longer reaction times, as the precatalyst introduces catalytic amounts of iodide. The possibility of an organozinc reagent was ruled out by the fact that TDAE was a competent reductant. When forming the secondary alcohol, the reaction proceeded with high enantiospecificity and regioselectivity. In the case when forming a primary alcohol, regioselectivity was substrate dependent with regards to the alkyl bromide. Alterations to the aryl bromide were well-tolerated. Nickel/Titanium Co-Catalyzed Regiodivergent Cross-Electrophile Coupling of Aryl Halides with Epoxides (2014) Conditions for branched product: NiCl2(dme) (10 mol%), bpy (10 mol%), Cp2TiCl2 (10 mol% + 4 mol% after 2 h), Et3N·HCl (1 equiv), Mn (2 equiv), and DMPU. Doyle and co-workers reported the regioselective cross-coupling of aryl iodides with epoxides using a Ni/Ti/photocatalytic system (Scheme 191).306 The optimal ligand for cross-coupling was dependent on the epoxide structure, with styrene oxides most generally effective with piperidinyl-PyCam (PyCam-3), cyclic epoxides with Bphen, and terminal aliphatic epoxides with ttbtpy. The authors noted that enantioenriched styrene oxides racemize under reaction conditions and favor the branched product, while enriched aliphatic epoxides retain their stereocenter and favor the linear product. Accordingly two mechanisms are proposed: styrene oxides engage with Ti(III) species to generate alkyl radical, while aliphatic epoxides undergo in situ ring-opening to form iodohydrins as intermediates. Nickel and Titanium Catalyzed Photoredox-Enabled XEC of Aryl Iodides with Epoxides (2020) (a) Ligand = PyCam-3, (b) Ligand = Bphen, MeCN instead of DMF, (c) Ligand = dtbbpy. XEC with Oxalates Hegui Gong and co-workers reported conditions for the deoxygenative coupling of tertiary alkyl oxalates with electronically activated aryl chlorides to give all-carbon quaternary centers with high selectivity for the retention product over isomerization (Scheme 192).307 MgCl2 is proposed to activate the oxalate for reduction by Zn to generate the putative tertiary alkyl radical. The authors demonstrate the synthetic utility of this method through the derivatization of the aryl chloride-containing drug fenofibrate in 65% yield under slightly modified reaction conditions. Modified conditions for trapping the tertiary alkyl radical with electron-deficient alkenes were also demonstrated. Formation of Quaternary Centers via Ni-Catalyzed XEC of Aryl Chlorides with Tertiary Alkyl Oxalates (2019) Ratio of quaternary product to isomerization product. Hegui Gong and co-workers then disclosed the activation of α-hydroxy carbonyls as redox-active oxalates, which can undergo C–O bond fragmentation and subsequent Ni-catalyzed cross-coupling with aryl halides (Scheme 193).308 The method was successful in providing the deoxygenated cross-coupled products for a variety of aryl bromides and iodides in good yields. Cyclic voltammetry measurements indicated that Zn alone is not sufficiently reducing for C–O bond fragmentation, suggesting that coordination to MgCl2 may be necessary to promote reduction of the oxalate. Mechanistic experiments with a 5-hexenyl radical clock probe at varying catalyst concentrations supported a radical chain mechanism. Ni-Catalyzed XEC of Aryl Halides with Oxalates Derived from α-Hydroxy Esters (2019) XEC with Allylic Acetates Following our first report on XEC, we reported conditions to couple aryl bromides and iodides with allylic acetates (Scheme 194).309 Using NiCl2(dme) and ttbtpy as our catalytic system, effective coupling of cinnamyl acetate with iodobenzene could be achieved in 90% yield. Tracking the mass balance, we observed minimal formation of biphenyl and alkyl dimer. The most significant competing reaction was hydrodehalogenation of the aryl coupling partner. A solvent mixture consisting of N-ethylpyrrolidinone (NEP)/THF was used but a DMA/THF mixture can be substituted if needed without a significant decrease in yield. A variety of electron-rich/neutral aryl iodides and electron-poor aryl bromides were compatible. Primary and secondary allylic acetates are tolerated with a preference for linear over branched products. This report also demonstrates couplings of allylic acetates with alkyl bromides and enones, which is highlighted in section 6.3.1, Scheme 355. Ni-Catalyzed XEC of Aryl Halides with Allylic Acetates (2012) Hegui Gong, Qun Qian, and co-workers developed the Ni-catalyzed cross-electrophile coupling of aryl bromides with allylic acetates (Scheme 195).310 During optimization, they discovered that 4-chloro-pyridinylimidazole (4-ClPyIm) was the best-performing ligand and that the reaction benefitted greatly from the presence of MgCl2 and Bu4NBr; it was suggested that these additives aid in zinc activation to participate in the reduction of nickel. In cases where it is more sterically favorable, regioisomers may form via transfer of nickel within the π-allyl-nickel(II) complex. An initial test toward enantioselective XEC was made in this study using a PyBOX ligand resulting in 45% yield and 10% ee. The authors reasoned that the mechanism did not proceed through organozinc species since primarily unreacted starting material was observed when the reaction was run without ligand. Cross-Electrophile Coupling of Aryl Bromides with Allylic Acetates (2013) With aryl chloride. XEC with Alkyl Ethers Doyle and co-workers applied their understanding of α-oxy radical generation in cross-electrophile coupling to form dialkyl ethers (Scheme 196) from aryl iodides and acetals.311 It is notable that the synthesis of dialkyl ethers generally relies on C–O bond formation (e.g., Williamson ether synthesis) or C(sp3)–C bond formation with organic nucleophiles, both of which exhibit limitations in functional group tolerance. Their conditions tolerate electronically diverse arenes including carbonyl functional groups, with no sign of ketyl formation. Using TMSCl as a Lewis acid and Zn as the reductant, they could generate the α-oxy radical as indicated by trapping experiments. Although less commonly applied in nickel XEC up to that point, 2,6-bis(N-pyrazolyl)pyridine (bpp), a tridentate amine ligand, proved to be the optimal choice. X-ray diffraction of the Ni(bpp) complex indicated a distorted octahedral geometry as opposed to square planar, the geometry seen in Ni(tpy) complexes. They suggest, however, that the redox potentials of the ligands contribute to the unique selectivity differences between the two conditions given their otherwise similar features. Ni-Catalyzed Cross-Electrophile Coupling of Aryl Iodides with Acetals (2015) Martin and co-workers reported the alkylation of aryl bromides via β-scission of alkoxy radicals derived from N-alkoxyphthalimide ethers (Scheme 197).312 The authors propose that alkoxy radical generation proceeds through an initial electron-donor–acceptor (EDA) complex between Hantzsch ester reductant and the N-alkoxyphthalimide ethers. Subsequent C–C β-scission results in the more substituted alkyl radical, which engages in cross-coupling to give the desired product. Notably, the method could be used to functionalize a variety of saccharide-derived coupling partners in good yields. The authors also demonstrated C(sp3)–C(sp3) coupling of alkyl bromides with N-alkoxyphthalimide ethers under modified conditions. Ni-Catalyzed Photoredox Approach to the XEC of Aryl Bromides with N-Alkoxyphthalimide Ethers (2020) With 2 equiv N-alkoxyphthalimide ether and 2 equiv Hantzsch ester. Bandini, Bertuzzi, Silva López, and co-workers disclosed a Ni-catalyzed cross-electrophile coupling approach for the synthesis of α-aryl-α-trifluoromethyl alcohols (Scheme 198).313 The authors found that the redox-active ether N-trifluoroethoxyphthalimide could be reduced through N–O bond cleavage. This affords a highly electrophilic oxygen radical, which undergoes a rapid intramolecular 1,2-HAT process, resulting in a more stable alkyl radical. The substrate scope shows broad functional group compatibility for the aryl iodide coupling partner, as bromide, boronate ester, triflate, and a TMS-protected alkyne were all well-tolerated in this reaction. An example of a pentafluoropropanol-derived N-alkoxyphthalimide coupling partner was low yielding (22%). DFT computations supported that Zn helps promote the N–O bond cleavage and that the key 1,2-HAT process is mediated by DMA. Ni-Catalyzed XEC of Aryl Iodides with N-trifluoroethoxyphthalimide (2022) XEC with Alkyl Acetates and Pivalates In 2016, the Jarvo group outlined both an intra- and intermolecular pathway for the coupling of alkyl pivalates with aryl bromides and iodides (Scheme 199).314 They observed high selectivity for the intramolecularly cyclized product, with lower yielding reactions being attributed to accelerated hydrodehalogenation. Adding pyridine or NaI disfavored product formation and led to increased hydrodehalogenation. The reaction could form 5- and 6-membered rings with various functionality at the alkyl site of reactivity, including heterocycles. A stereospecific version of this cyclization was described, which proceeded in good to high enantiospecificity (83–96% es). In addition, they adapted their conditions to apply to intermolecular examples, requiring a swap of the ligand to dppf. These examples were limited to benzylic coupling partners, but good yields were achieved. Inter- and Intramolecular Ni-Catalyzed XEC of Aryl Halides with Benzylic Pivalates (2016) (a) With Bphen as ligand. (b) With dppf as ligand. In 2022, Chao Li and co-workers reported a diastereoselective procedure for the cross-electrophile coupling of furanosyl acetates with aryl iodides (Scheme 200).315 During optimization, the β-anomer was selectively formed though a few scope entries favor the α-anomer. Generally, sterically hindered ortho-substituted arenes are tolerated, although they give lower yields. The conditions also tolerate a range of electronic aryl iodide profiles, and these conditions are chemoselective for aryl iodides over bromides and chlorides. A variety of sugars, such as ribofuranoses and mannofuranoses, as well as different classes of heterocycles, were compatible. The researchers were successful in scale up attempts, running this reaction at the gram scale. Ni-Catalyzed XEC of Aryl Iodides and Furanosyl Acetates (2022) With 5 equiv of TMSBr. Carboxylic Acids as Electrophiles XEC with N-Hydroxyphthalimide Esters Prior to their use in XEC reactions, N-hydroxyphthalimide (NHP) esters had been previously shown to generate alkyl radicals following single electron transfer,316,317 providing motivation that NHP esters could be competent coupling partners in XEC methods. Concurrent with our work in XEC, Baran and co-workers reported impressive results coupling NHP esters with arylzinc reagents.318 Our group developed the Ni-catalyzed decarboxylative cross-electrophile coupling of NHP esters with aryl iodides (Scheme 201).319 Notably for the time, this report represented a complementary approach to alkyl radical generation from carboxylic acids instead of photochemistry. This method proved especially useful in cases where the corresponding alkyl halide is not commercially available, unstable, or simply fails to couple. We utilized a preformed nickel(II)aryl complex and subjected it to reaction conditions with and without zinc powder and saw comparable yields of product formation. These results suggest that the formation of an arylzinc intermediate is unlikely. Ni-Catalyzed XEC of Aryl Iodides and N-Hydroxyphthalimide Esters (2016) With 1 equiv of NHP ester and 12 mol% NiBr2(dtbbpy). Loren and co-workers reported the use of NHP esters, generated in situ from alkyl carboxylates, in an electrochemical decarboxylative cross-coupling with aryl iodides (Scheme 202).320 The one-pot protocol involves initial conversion of sodium alkyl carboxylates to redox-active NHP esters using N-hydroxyphthalimide tetramethyluronium hexafluorophosphate (PITU) as the activating reagent, followed by addition of the remaining reagents and catalyst for subsequent cross-coupling. Notably, the use of an undivided cell further simplifies reaction setup. Electron-poor aryl iodides were generally better performing than electron-rich iodides, and a variety of primary and secondary alkyl carboxylates were compatible. Electrochemical Coupling of Aryl Iodides with in Situ Generated Redox Active Esters in a One-Pot Nickel XEC Protocol (2019) Ley and co-workers described the use of a packed zinc bed column in a continuous flow system for the cross-electrophile coupling of N-hydroxyphthalimide esters with aryl iodides (Scheme 203).321 Through the use of a packed zinc bed column, the authors were able to run this previously heterogeneous reactions homogeneously in flow, and avoid downstream removal of zinc and its byproducts from the reaction solution. The authors report that the zinc column can be reused ten times on 0.4 mmol scale with no loss in efficiency. In addition, their preparation of the reaction mixture did not require rigorous exclusion of air or water. Under this flow setup, the reaction time was significantly decreased (from 12 h in batch to 10 min in flow). As a showcase of the utility of this setup, the authors ran the flow setup for 31 h, delivering >11.7 g of cross-coupled product without significant diminished efficiency of the remaining zinc bed. Continuous Flow Ni-Catalyzed XEC of Aryl and Heteroaryl Halides with Redox-Active Esters (2020) (a) With aryl bromide, NiCl2(dme) (20 mol%), PyCam (22 mol%) under 20 min tR. (b) Using crude redox-active ester. Janssen Discovery Process Research, led by Herrmann, reported the decarboxylative cross-electrophile coupling of pyrimidinyl and pyridyl halides with N-hydroxyphthalimide esters using a metallaphotoredox strategy (Scheme 204).322 Using Hünig’s Base as terminal reductant, the authors focused on medicinally relevant heterocycles bearing sensitive functional groups that are challenging substrates in the cross-electrophile coupling literature. The authors found that, under these conditions, an electron-donating group at the 2-position and an electron-withdrawing group at the 5-position was necessary for optimal success. However, they saw some success with electron neutral groups at the 2- and 6- positions when changing from heteroaryl chlorides to the more reactive heteroaryl bromides. Coupling of Heteroaryl Halides with NHP Esters Through Nickel/Photoredox XEC (2021) (a) With Ir(p-CF3-ppy)3 and DMSO. (b) With [(Ir[dF(CF3)ppy]2(dtbbpy)]PF6, 1 equiv aryl chloride, 2 equiv NHP ester, and 1,4-dioxane. The Molander lab reported the nickel/photochemical XEC of aryl bromides with NHP esters (Scheme 205).56 The authors propose that decarboxylative activation of the NHP ester occurs via formation of an electron donor–acceptor (EDA) complex. By utilizing Hantzsch ester as both a photocatalyst and an organic reductant, the authors preclude the need for an exogenous photocatalyst and a metal reductant. The scope is broad, with better reactivity observed with electron deficient (hetero)aryl bromides, and ortho-substituted aryl substrates did not hinder reactivity. Photochemical/Nickel Dual Catalyzed XEC of Aryl Bromides and NHP Esters via an EDA Complex (2021) Azetidines are of interest for medicinal chemistry development as they present a low-molecular weight scaffold to introduce three-dimensionality. While significant advancements have been made toward their syntheses, these have mainly focused on derivatizing the 3-position. Pfizer Medicinal Chemistry, led by Brewster and Hinklin, described the synthesis of 2-heteroaryl azetidines through decarboxylative cross-electrophile coupling of N-Boc azetidine NHP esters with heteroaryl iodides (Scheme 206).323 The NHP ester is proposed to form an electron donor–acceptor (EDA) complex with an excited state Hantzsch ester before SET reduction to generate the azetidinyl radical and phthalimide anion. Under these conditions, a diverse set of heteroaryl iodides with electron-donating and -withdrawing groups, sensitive functional groups, and ortho-substitution were competent coupling partners. Using a substituted azetidine NHP ester, the authors observed high diastereoselectivity. The high chemoselectivity of this XEC with a chloro-substituted heteroaryl iodide allowed further functionalization of the chloride via a Pd-catalyzed Suzuki cross-coupling. Nickel/Photochemical XEC of Heteroaryl Iodides with NHP-Functionalized Azetidines (2022) (a) With 3 equiv aryl iodide, 5 equiv NaHCO3, and 1.25 equiv Hantzsch ester. (b) With 2 equiv aryl iodide, 1 equiv NHP ester, 1.2 equiv Hantzsch ester. Rousseaux and co-workers, in collaboration with Merck Process Chemistry, reported the α-arylation of secondary amides using aryl iodides and NHP esters (Scheme 207).324 The authors found that an equimolar ratio of Zn and Mn as terminal reductants provided the highest yields of cross-coupled product and minizimed aryl dimerization. The chlorosilane additive was critical for reactivity, and TMSCl can be swapped for the less common PhMeSiCl2 with only a small decrease in yield. These conditions tolerate other cross-coupling functionality on the aryl iodide (e.g., bromide, tosylate). These methods were also extended to the functionalization of N- and C-terminus functionalized amino acids, which can be applied to the synthesis of peptide analogues. Ni-Catalyzed XEC of Aryl Iodides with NHP Esters for the α-Arylation of Amides (2022) With TMSCl (3 equiv) instead of PhMeSiCl2. Our group, in collaboration with Janssen Research and Development, disclosed a general approach to couple aryl halides with strained ring derived NHP esters through XEC (Scheme 208).325 Conventional NHP esters of cyclopropanes, bicyclopentanes, azetidines, and other strained rings were compatible. We also demonstrated that tuning the electronics of the NHP esters can control the rate of radical generation (by tuning the reduction potential), enabling improved rate-matching of coupling partners. More electron-rich MeNHP and MeONHP esters could slow down radical generation and provide increases in yields of couplings with electron-rich aryl halides. We also showed that these conditions could be scaled up using a continuous flow setup and scaled down to a 96-well plate format on 10 μmol scale. An X-ray structure of an arylnickel(II) oxidative addition complex with t-BuBpyCamCN was also reported, providing structural insights to the binding mode of this new ligand. Arylation of Strained Rings Through the Ni-Catalyzed XEC of Aryl Halides with NHP Esters (2022) Reactions run with NHP ester (R2 = H) unless noted. (a) R2 = OMe. Rousseaux, Huestis, and co-workers reported a decarboxylative cross-electrophile coupling of strained ring NHP esters derived from amino acids with a range of aryl halides (Scheme 209).326 While the focus was on cyclopropylamines, the authors also showed that their conditions were compatible with NHP esters of cyclobutylamine, N-Boc-aminooxetane, and N,N-Boc-protected aminoazetidine. It is worth noting that the use of TMSCl additive was essential for the product formation. Ni-Catalyzed XEC of Aryl Halides with Strained Ring NHP Esters Derived from Amino Acids (2022) (a) X = I. (b) X = Br. (c) With NiCl2(dtbbpy) (20 mol%). The Baran lab in collaboration with scientists at Biogen, Pfizer, Bristol Myers Squibb, Minakem Recherche, LEO Pharma and Enamine reported conditions for electrochemically driven XEC of NHP esters with aryl halides (Scheme 210).327 The found that their Ag–Ni electrocatalysis setup could address challenging couplings with electron-rich aryls and heterocycles. In situ activation of the NHP ester was also demonstrated for substrates challenging to isolate. To support the beneficial effects of the newly discovered system, the authors conducted a head-to-head comparison with four reported methods for such types of reaction for selected substrates that pose challenges in those previous reports. They also showcased a 100 mmol scale synthesis with a recirculating flow setup for two of the selected examples. The role of in situ-formed electrode-bound Ag-nanoparticles was observed to be beneficial in (1) extending catalyst lifetime, (2) preventing background NHP-ester decomposition, and (3) lowering the required overpotential, which results in better functional group tolerance. Ni-Catalyzed Electrochemical Approach to the Decarboxylative XEC of Aryl Halides with Redox-Active Esters (2022) XEC with Anhydrides Xuebin Liao and co-workers published the cross-electrophile coupling of aryl halides with organic anhydrides through a decarboxylative process (Scheme 211).328 Inspired by previous work in the decarboxylative coupling of NHP esters, they show that pyridine N-oxide reacts with the anhydride to form an O-acylated species that can be reduced to form pyridine, CO2, and the alkyl radical. Both primary and secondary carboxylic acid anhydrides were coupled successfully, with secondary anhydrides providing slightly lower yields. Due to the reaction’s high chemoselectivity for alkyl carboxylic acids, mixed anhydrides with p-toluic acid could also be used to avoid wasting valuable carboxylic acid coupling partners. Decarboxylative Ni-Catalyzed XEC of Aryl Iodides with Anhydrides (2018) Fluoroalkylation The incorporation of fluorinated alkyl fragments in bioactive molecules has become increasingly important in drug discovery. Cross-electrophile coupling strategies to directly install fluorinated fragments are an attractive alternative to many current methods that employ nucleophilic fluorinated coupling partners. Methods which utilize environmentally friendly and easy-to-handle solid reagents (over gaseous fluorinating reagents) are becoming increasingly reported in the literature.329,330 Alkyl Bromides as Fluoroalkylating Reagents The MacMillan group applied their metallaphotoredox silyl-radical strategy to difluoromethylarene synthesis from the cross-coupling of aryl bromides with BrCF2H (Scheme 212).43,331 The conditions tolerate a variety of sensitive functionality as well as ortho-substituted arenes, and heterocycles. Electron-deficient aryl bromides required a significant excess of bromodifluoromethane, as the faster oxidative addition of the aryl species requires an excess of the alkyl partner to match reactivities. Conversely, electron-rich arenes required fewer equivalents of bromodifluoromethane. To demonstrate the pharmaceutical relevance of this reaction, they performed late-stage difluoromethylation on four medicinally relevant compounds, in 64–82% yield. Nickel/Photoredox XEC of Aryl Bromides with Bromodifluoromethane (2018) (a) 19F NMR yield. (b) With DABCO (3 equiv) instead of 2,6-lutidine. Xingang Zhang and co-workers disclosed a Ni-catalyzed XEC strategy for the difluoroalkylation of aryl bromides (Scheme 213).332 Initially they observed low conversion of the aryl bromide, but adding NaI improved yields and inhibited the formation of protodebrominated side-products. Incorporating 3 Å MS further improved yields, although the exact reason is unknown. The reaction is tolerant of functional groups such as aldehydes, nitriles, silyl groups, and free alcohols. The reaction was highly chemoselective for alkyl CF2–Br activation over alkyl CH2–Br. Control experiments and 19F NMR monitoring ruled out the formation of difluoroalkylzinc species. Ni-Catalyzed XEC of Aryl Bromides with 1-Bromo-1,1-difluoroalkanes (2018) Xi-Sheng Wang and co-workers reported the monofluoromethylation of aryl bromides, with BrCH2F as the radical precursor (Scheme 214).333 Control experiments rule out the possibility of monofluoromethyl manganese species participating in the reaction and is instead proposed to proceed via a monofluoromethyl radical. Ni-Catalyzed XEC of Aryl Bromides with Bromofluoromethane (2019) Xingang Zhang and co-workers reported the XEC of aryl bromides with BrCF2H (Scheme 215).334 The authors ruled out formation of difluoromethylzinc intermediates by monitoring the reaction with 19F NMR. In addition, radical clock experiments indicated the intermediacy of a difluoromethyl radical. A variety of arene electronics and heterocycles were coupled successfully in this protocol. Difluoromethylation of Aryl Bromides with Bromodifluoromethane through Ni-Catalyzed XEC (2019) With aryl bromide (2 equiv), Ni(PPh3)2Br2 (5 mol%), dtbbpy (5 mol%), and 3 Å MS. Alkyl Iodides as Fluoroalkylating Reagents Xi-Sheng Wang and co-workers reported the Ni-catalyzed monofluoroalkylation of aryl bromides and iodides (Scheme 216).335 The authors found that a combination of bipyridine and pyridine ligands was optimal for cross-coupling, with the mixed ligand system dependent upon the substrate pair. Through combinatorial screening of ten monodentate ligands with five bidentate ligands, five ligand combinations afforded ∼90% yield in their model cross-coupling. The conditions could also be extended to the coupling of aryl iodides with nonfluorinated alkyl fragments. Mechanistic experiments support the involvement of a monofluoroalkyl radical instead of an alkylmanganese species. Ni-Catalyzed XEC of Aryl Iodides with Monofluoroalkyl Iodides (2018) (a) L = 4,4′-Mebpy (10 mol%)/4-CNpy (20 mol%), (b) L = 4,4′-Mebpy (10 mol%)/py (20 mol%), (c) L = 4,4′-MeObpy (10 mol%)/2,6-MeOPy (20 mol%), (d) L = dtbbpy (10 mol%)/4-CNpy, (e) With BrCFH2 (1.5 equiv) instead of alkyl iodide, (f) With aryl bromide instead of aryl iodide and NaI (1 equiv) at 80 °C. Xi-Sheng Wang and co-workers reported the trifluoroethylation of aryl halides using a cross-electrophile coupling strategy (Scheme 217).336 The authors attribute the high reaction efficiency to the combination of dtbbpy and dppf ligands. Under these conditions, an electronically diverse set of aryl iodides bearing a variety of sensitive functional groups and ortho-sterics were trifluoroethylated in high yields. Notably, the authors successfully applied this method to the trifluoroethylation of several bioactive compounds, including the aryl iodide derivatives of fenofibrate, ezetimibe, and loratadine. The presence of a trifluoroethyl radical was supported through radical trapping with TEMPO, and control experiments with Mn indicated no formation of trifluoroethylmanganese species. Ni-Catalyzed XEC of Aryl Iodides with 1,1,1-Trifluoro-2-Iodoethane (2020) Yi Yang, Yingle Liu, and co-workers reported the β-fluoroethylation of aryl chlorides using nickel XEC (Scheme 218).337 The method was utilized in the derivatization of several aryl chloride containing pharmaceuticals, such as clofibrate, fenofibrate, and loratadine. An extension of the scope to aryl triflates and β-fluoroalkyl halides as coupling partners was demonstrated in lower yields. Control experiments rule out the formation of organomanganese species. Ni-Catalyzed XEC of Aryl Halides with β-Fluoroethyl Alkyl Halides (2020) With aryl bromide, 4,4′-Mebpy (10 mol%) as ligand, and TBAI (20 mol%) instead of MgCl2. Alkyl Chlorides as Fluoroalkylating Reagents Xingang Zhang and co-workers in 2018 reported the difluoromethylation of aryl chlorides through XEC (Scheme 219).338 The authors found that a combination of electron-rich ligands 4,4′-NH2bpy and DMAP was optimal for aryl chloride activation. Radical clock experiments support the formation of difluoromethyl radical. Furthermore, control experiments showed that difluoromethylzinc was not a competent intermediate in this reaction. The authors showed the arylnickel(II) complex [(dtbbpy)Ni(4-t-Bu-C6H4)Cl] to be a competent precatalyst, suggesting that the reaction begins through oxidative addition to the aryl chloride. The method can be applied to a diverse set of aryl chlorides with good functional group tolerance, including the difluoromethylation of several aryl chloride containing pharmaceuticals. Use of Chlorodifluoromethane for the Ni-Catalyzed Difluoromethylation of Aryl Chlorides (2018) (a) With 15 mol% NiCl2 and 10 mol% 4,4′-NH2bpy. (b) With 20 mol% NiCl2 and 10 mol% 4,4′-NH2bpy. Xingang Zhang and co-workers demonstrated a Ni-catalyzed cross-electrophile coupling of aryl halides with chlorotrifluoroethane (Scheme 220).339 They also successfully encompassed heteroaryl halides within their scope, coupling quinolines, indoles, and benzoxazoles. It was noted, however, that simple pyridines were an exception and did not couple well. Several aryl chloride containing pharmaceuticals were successfully trifluoroethylated, such as chlormezanone and loratadine. Ni-Catalyzed Trifluoroethylation of Aryl Bromides via XEC (2021) Xinjin Li and co-workers reported the 2,2-difluoroethylation of aryl bromides with 2-chloro-1,1-difluoroethane (HCFC-142) using a cross-electrophile coupling strategy (Scheme 221).340 Similar to other reports in this area, the authors propose that DMAP may function as a coligand in the reaction. From comparative studies, there appears to be a fluorine effect, with di- and trifluoroethylated products resulting in a higher yield than the monofluoroethylated product. All fluorinated reagents resulted in higher reactivity than 1,2-dichloroethane or 1-chloropropane. Ni-Catalyzed XEC of Aryl Bromides with 2-Chloro-1,1-Difluoroethane (2022) With dtbbpy (10 mol%) and DMAP (20 mol%) at 110 °C. Xingang Zhang and co-workers developed a Ni-catalyzed XEC of heteroaryl halides with chlorodifluoroacetamides and chlorodifluoroacetate (Scheme 222).341 The authors proposed that the use of a soft phosphine coligand, which are more labile on the nickel center than hard bipyridine ligands, may protect the active nickel species from decomposing. The authors utilized these conditions to prepare several biologically active molecules, including an AMPAR allosteric modulator and FKBP12 inhibitor. Mechanistic experiments ruled out the formation of difluoroacetylzinc intermediates. Ni-Catalyzed Fluoroalkylation of Heteroaryl Halides with Chlorodifluoroacetamides (2022) Other Alkyl Precursors Hughes and Fier reported a desulfonylative cross-electrophile coupling of aryl bromides with alkyl phenyltetrazole sulfones (Scheme 223).342 The optimized reaction conditions were developed from an initial hit found by microscale-high throughput experimentation. As applications, the authors demonstrated the synthesis of complex diarylmethanes and the straightforward derivatization of a methyl sulfone to enable the preparation of an aryl indane core. A cyclopropylmethyl radical clock experiment supported the formation of alkyl radical intermediates. XEC of Aryl Bromides with Redox-Active Alkyl Sulfones via Nickel Catalysis (2019) Jie Liu and co-workers reported the electroreductive allylation of aryl chlorides with allylic sulfones (Scheme 224).343 The reaction conditions are tolerant of a variety of electronics on both the aryl chloride and allyl sulfone. The authors also report initial results coupling aryl triflates with allyl sulfones, as well as aryl chlorides with aliphatic sulfones. Addition of LiCl was necessary for efficient reduction of the nickel catalyst. Electrochemically-Driven Ni-Catalyzed XEC of Aryl Chlorides with Allylic Sulfones (2023) Xiaomeng Zeng and co-workers reported the Cr-catalyzed deoxygenative coupling of aryl pivalates with C = O bonds of aryl amides to form diarylmethylated tertiary amines (Scheme 225).344 Through stoichiometric and deuterium-labeling experiments, the authors propose that upon oxidative addition of the aryl ester to the chromium catalyst, the resulting complex reacts with Mg and TMSCl to form the arylated silachromate(II) complex. Addition of this complex to the amide carbonyl bond is expected to occur in a regioselective manner to form the aryl-alkylchromium complex. Upon reductive elimination, the silyloxy group undergoes deoxygenative HAT to give the arylated tertiary diarylmethylamine. This method was applied to the derivatization of tertiary amide-containing drugs such as trimetozine and trocimine. Deoxygenative Chromium-Catalyzed XEC of Aryl Pivalates with and Aryl Amides (2023) Fan Wu and co-workers disclosed the Ni-catalyzed XEC of benzylic sulfonium salts with aryl iodides (Scheme 226).345 The reaction conditions appear best with electron-neutral and electron-rich sulfonium salts. The authors describe two sets of conditions for primary and secondary benzyl sulfonium salts. Preliminary mechanistic experiments appear to rule out the formation of benzylzinc intermediates. Ni-Catalyzed XEC of Aryl Iodides with Benzylic Sulfonium Salts (2021) Conditions for R2 = Me or Et: NiI2 (10 mol%), dtbbpy (15 mol%), Zn (2.0 equiv), MgBr2 (30 mol%), DMA (0.6 M) at 40 °C. Husan-Hung Liao and co-workers reported the XEC of benzyl mercaptans or mercaptoacetates with aryl halides via desulfurative benzylic radical generation from a tetrafluoropyridine thioether source (Scheme 227).346 Primary alkyl sources resulted in higher yields than secondary, which the authors attribute to stabilized secondary radicals favoring homodimerization. To achieve good yields with electron-rich aryls, the authors swapped from the aryl bromide to the iodide. The authors showed that the tetrafluoropyridine thioether can be formed from the thiol precursor and directly used crude in coupling with no decrease in yield. Desulfurative Arylation of Benzyl Mercaptans and Mercaptoacetates with Aryl Halides (2022) (a) X = Br. (b) X = I. Stereocontrolled XEC of Aryl–X with Alkyl–X Alkyl Chlorides as Electrophiles Durandetti and co-workers extended their electrochemical strategy to an asymmetric method, using chiral auxiliaries to control stereochemistry in the XEC of aryl halides with α-chloropropionates (Scheme 228).347 In an evaluation of common chiral auxiliaries, the highest levels of diastereoselectivity were obtained with imidazolidinone derivatives. No racemization of the stereocenter was observed when removing the chiral auxiliary. Electrochemically Driven Asymmetric Ni-Catalyzed XEC of Aryl Halides with α-Chloropropionic Acid Derivatives (1997) %ee calculated after removal of auxiliary group. In 2015, the Reisman group detailed a Ni-catalyzed asymmetric cross-coupling reaction of heteroaryl iodides with α-chloronitriles (Scheme 229).348 Initially starting with BOX ligands, they found rapid consumption of the α-chloronitrile to the hydrodehalogenation product. Swapping to electron-rich DMMB-PHOX as ligand led to improved yields and enantioselectivity which they hypothesized was due to the increased rate of oxidative addition step. The conditions are chemoselective for aryl iodides over other halogens. In general, a variety of aromatic and saturated heterocycles were tolerated. Pyridines and pyrimidines that had open C2 positions were low yielding substrates, which was attributed to the nitrogen’s Lewis basicity. Good to excellent enantioselectivity was generally observed (>80% ee). Increased steric hindrance at the alkyl coupling was shown to benefit enantioselectivity but at the cost of yield. Asymmetric Ni-Catalyzed XEC of Heteroaryl Iodides with α-Chloronitriles (2015) (a) Yield and %ee after one recrystallization. (b) With 2.0 equiv of heteroaryl iodide. In 2017, the Reisman group reported a method for the Ni-catalyzed asymmetric cross-electrophile coupling of secondary benzyl chlorides with aryl iodides enabled by the use of a chiral BiOX ligand (Scheme 230).349 While investigating ligand effects on the reaction, they observed that the length of the alkyl chain on the BiOX ligand had a positive correlation to yield and enantioselectivity. Replacing the benzyl chloride with the corresponding bromide resulted in significant homocoupling of the alkyl coupling partner. Coupling pyridines, pyrimidines, and indoles resulted in high yields and good levels of stereocontrol (>80% ee). The reaction is chemoselective for benzylic over primary alkyl chlorides. To showcase their method further, the authors prepared a key chiral intermediate relevant for production of sertraline, an antidepressant. Asymmetric XEC of Secondary Benzyl Chlorides with Aryl Iodides (2017) Jianyou Mao and Walsh reported an enantioselective arylation of α-chloroesters with aryl iodides using a metallaphotoredox strategy (Scheme 231).350 A combination of 4-heptyl-substituted BiOX and a sterically bulky substituents on the ester were responsible for the high enantioselectivity. Both α-alkyl and α-aryl chloroesters were compatible in this protocol. The addition of Cy2NMe sequesters any HX generated from the reaction. A reaction with stoichiometric Ni(COD)2 and chiral ligand afforded identical enantioselectivity to the catalytic conditions, suggesting that the enantiodetermining step does not involve Hantzsch ester or Cy2NMe. Asymmetric Cross-Coupling of Aryl Iodides with α-Chloroesters via Nickel/4-CzIPN Photoredox Catalysis (2020) Reisman and co-workers developed conditions for the enantioselective cross-electrophile coupling of secondary α-chloroesters with aryl iodides (Scheme 232).351 They found bioxazoline (BiOX) ligands performed well in this reaction, especially when equipped with alkyl substituents, and the highest enantioselectivity and yield was achieved with 4-heptyl-BiOX. The found that enantioselectivity increased with the size of the α-chloroester substituent. To investigate this further, they, in collaboration with the Sigman group, investigated the reaction computationally. Using multivariate linear regression analysis, they concluded that this trend was indeed due to the steric matching of substrate with catalyst. They include the synthesis of (S)-naproxen from their method and show that manganese-enolates are not viable intermediates in the reaction. Asymmetric Ni-Catalyzed XEC of α-Chloroesters with Aryl Iodides (2021) Investigating the potential to modify sulfone-containing alkyl substrates, Hegui Gong, Chuanhu Lei, and co-workers developed an asymmetric cross-electrophile coupling of aryl halides with α-chlorosulfones (Scheme 233).352 For this reaction, they determined a chiral BOX ligand to be optimal for both product yield and enantioselectivity. Substrates containing acidic protons were competent under these conditions. A variety of heteroaryl halides were compatible in this reaction as were a series of drug molecule cores (e.g., celecoxib). Stoichiometric experiments with (dtbbpy)arylnickel(II) supported that radical capture and reductive elimination from nickel(III) is a viable pathway. Cross-Electrophile Coupling of α-Chlorosulfones with Aryl Halides via Enantioselective Nickel XEC (2021) Conditions: NiBr2(BOX-1) (10 mol%), Mn (3 equiv), aryl bromides (2 equiv), 1,4-dioxane at rt. Yunrong Chen, Jifen Wang, Guobin Ma, and co-workers reported the enantioconvergent XEC of racemic 1-chloro-1-alkanol esters with aryl bromides (Scheme 234).353 With the conditions employed, a variety of 1-chloro-1-alkanol esters with varying alkyl chain lengths and steric profiles could be efficiently coupled with aryl bromides in high yields and good enantioselectivity, in which lower steric bulk near the reactive center gave the highest yields. The demonstrated derivatization of several pharmaceutically relevant compounds such as Fenofibrate and Indomethacin as well as the synthesis of the key scaffolds of Pradefovir and Ezetimibe. Notably, the 1-chloro-1-alkanol starting material can be generated in situ from the corresponding aldehyde and acid chloride with only a minimal decrease in yield and enantioselectivity after cross-coupling. Ni-Catalyzed Asymmetric Reductive Arylation of 1-Chloro-1-Alkanol Esters with Aryl Bromides (2022) Tian-Sheng Mei and co-workers disclosed an enantioselective cross-electrophile coupling between α-chloroesters with aryl bromides through a paired electrolysis approach (Scheme 235).354 Good enantioselectivities (>90% ee) and reactivities (>70% yield) were achieved in most cases by using a bi-imidazoline type ligand in combination of a nickel(II) precatalyst under a cell potential of 2.9 V. The reaction was proposed to go through an anode oxidation of the bromide anion to form bromine radical which rapidly abstracts a hydrogen atom from the silane. The resulting silyl radical was proposed to react with α-chloroesters through chlorine atom abstraction to generate the desired alkyl radical which then engaged in the cross-coupling event. Enantioselective XEC of α-Chloroesters with Aryl Bromides via Paired-Electrolysis (2022) Alkyl Bromides and Iodides as Electrophiles The usual steps of an XEC reaction can be interwoven with other intramolecular steps to form complex cascades. Chuan Wang and co-workers reported an enantioselective domino arylation/ring-opening/alkylation reaction between cyclobutanone tethered aryl iodides and alkyl bromides (Scheme 236).355 This reaction employs a chiral diphenylphosphinobenzoic acid (DPPBA)-based ligand, developed by Trost,356 which is a rare ligand class in XEC. The authors propose that selective insertion of arylnickel(I) into the C–C σ-bond of the cyclobutanone as the enantiodetermining step. It is also notable because the aryl iodides are among the most hindered in this review (ortho-tertiary alkyl substitution). Ni-Catalyzed XEC of Aryl Iodides with Alkyl Bromides Featuring Carbon Skeleton Rearrangement (2020) Zhi-Liang Shen, Xiaocong Zhou, and co-workers reported the diastereoselective cross-electrophile coupling of cycloalkyl iodides with aryl iodides to afford the anti-diastereomer (Scheme 237).357 While this study focused on 1,2-disubstituted cycloalkanes (generally in 99:1 dr), the authors report one example each of 1,3- and 1,4-disubstituted products, with good yields and lower diastereoselectivity (84:16 dr and 77:23 dr, respectively). A linear aliphatic iodide coupling partner was compatible, but in afforded lower diastereoselectivity (68:32 dr). Diastereoselective XEC of Cycloalkyl Iodides with Aryl Iodides (2021) Alkyl Amines as Electrophiles The Doyle and Sigman groups investigated the enantioselective coupling of styryl aziridines with aryl iodides (Scheme 238).358 In line with previous findings from the Doyle group,311 a racemic XEC approach with bpp ligand was developed. The electronics on both the aryl iodide and aziridine can be varied without substantial decreases in yield. To make this reaction enantioselective, the group employed (R)-4-heptyl-BiOX as ligand under slightly modified conditions. Parameterization studies were undertaken to elucidate factors directly contributing to enantioselectivity. The three contributors were identified to be B1, NBOO, and Pol representing the minimum width of the R substituent of the ligand, the NBO charge of the oxygen atoms on the ligand, and the polarizability of the ligand, respectively. Ni-Catalyzed Racemic and Enantioselective XEC of Aryl Iodides with Styryl Aziridines (2017) Modified conditions: NiCl2(dme) (15 mol%), (R)-4-heptyl-BiOX (18 mol%), NaI (2 equiv), TMSCl (20 mol%), Mn (3 equiv), THF (0.1 M) at −10 °C. Epoxides as Electrophiles Following our report on the cross-coupling of epoxides with aryl halides (see section 4.2.5.3, Scheme 190),305 we expanded this finding to an enantioselective approach (Scheme 239).359 Using a traditional nickel catalyst, we employed a chiral titanium cocatalyst (Kagan’s complex) to influence facial selectivity. Using meso-epoxides, a range of electronically diverse aryl bromides were coupled. C–Cl bonds were tolerated on aryls that contained multiple halides. This study also investigated the enantioselective coupling of vinyl halides/triflates with epoxides. In many of the scope examples, enantioselectivity was above 85% ee. Enantioselective Ni-Catalyzed Cross-Electrophile Coupling of Aryl Halides with meso-Epoxides (2015) Conducted on a 5 mmol scale. To address the regioselectivity issues arising from previously reported Ni-catalyzed XEC reactions between aryl halides and epoxides, Yamamoto and Banerjee hypothesized that hydroxy groups added β- to the epoxide could act as directing groups (Scheme 240).360 Their approach was precedented by a previous finding they had published on regio- and enantioselective aminolysis.361 Reaction development led them to design a chiral silyl-ether-based BiOX ligand which gave 90:10 dr and >99:1 regioselectivity in their model reaction. In all substrates investigated enantioselectivities were excellent (>90% ee). Removal of the hydroxy directing group diminished diastereoselectivity. Regio-, Diastereo-, and Enantioselective XEC of Aryl Iodides with Epoxides (2017) Racemic epoxyalcohol was used. Doyle and co-workers expanded on their previous work and developed an enantioconvergent synthesis of chiral diarylmethanes using racemic styryl oxides with aryl iodides (Scheme 241).306,362 While BiOx ligands, used in their aziridine couplings, resulted in notable enantiocontrol with epoxides (50–75% ee), yields were moderate. Swapping to a more electron-rich biimidazoline (Bilm) improved yields with excellent enantioinduction. With comparable redox properties, Ir[dF(CF3)ppy]2(dtbbpy)PF6 could be substituted out with 4-CzIPN. Competition reactions ruled out epoxide oxidative addition to Ni(0) before aryl iodide and control experiments showed that halohydrin (from epoxide ring-opening with Br–) was a competent reaction intermediate. Swapping the aryl iodide with an aryl bromide or the epoxide with an N-Ts aziridine was also viable under reaction conditions. Multivariant linear regression analysis was conducted to further understand the effects of various ligand parameters on the reaction. XEC of Aryl Iodides with Styrene Oxides Enabled by a Nickel/Iridium Photoredox System (2021) Alkyl Halides as Fluoroalkylating Reagents Xi-Sheng Wang and co-workers developed an asymmetric approach to the trifluoroalkylation of aryl iodides (Scheme 242).363 In their ligand evaluation, they found that secondary alkyl chains on the bioxazoline core increased enantioselectivity. With their optimized conditions, the authors showed generality toward coupling aryl substrates with aldehydes and free alcohols, in addition to a variety of heterocycles and bioactive molecules. Their alkyl scope included examples where functional groups such as unactivated chlorides, ferrocene, and cyclic protected amines are tolerated. High enantioselectivity was demonstrated, with most products generated above 90% ee. They also showed that these conditions can work with other alkyl–CF2Br coupling partners. Asymmetric Ni-Catalyzed XEC of α-Trifluoromethyl Alkyl Bromides with Aryl Iodides (2021) With NiBr2(dme) (15 mol%), (S)-n-Pr-BiOx (20 mol%) at 0 °C. Tao Xu and co-workers reported the asymmetric trifluoroalkylation of aryl iodides through a nickel/photochemical XEC (Scheme 243).364 The authors propose that the reaction proceeds through alkyl radical formation, which does not occur through reduction of alkyl bromide by excited state 4-CzIPN* as indicated by photoluminescence quenching experiments. Competition experiments between aryl iodides with different electronics showed a strong preference for consumption of the more activated substrate. A broad set of aryl iodides possessing electron-withdrawing and electron-donating groups were successfully trifluoroalkylated in high enantioselectivity, including the late-stage diversification of several drug-derived molecules. Nickel/Iridium Photoredox Approach for the XEC of Aryl Iodides with α-Trifluoromethyl Alkyl Bromides (2021) Tao Xu and co-workers also reported the coupling of aryl iodides with perfluoroalkylated α-iodoboronates to form enantioenriched perfluoroalkylated boronate esters (Scheme 244).365 The authors propose that addition of n-Bu4NCl is necessary to accelerate the reduction of NiIIX2 species, but all other chloride additives explored resulted in significantly diminished yields. The biimidazole (BiIm) ligand structure appears crucial, with a diamine or bis(oxazoline) ligand core resulting in no desired product, or diminished yield, respectively. Changing the steric bulk on the 2,8 positions from i-Pr to s-Bu resulted in a minimal increase in yield and enantiomeric ratio. The functional group tolerance of aryl iodides is broad, including electron rich and ortho-substituted aryls. Enantioconvergent Ni-Catalyzed XEC of Aryl Iodides with β-Perfluoroalkylated α-Iodo Boronate Esters (2021) Synthetic Applications of C(sp2)–C(sp3) Aryl–Alkyl XEC In a 2017 report describing the synthesis of GPR55 agonists, Croatt and co-workers applied cross-electrophile coupling into their synthetic plan (Scheme 245).366 Their goal was to couple an intermediate aryl bromide with ethylene oxide, later protecting the resulting alcohol with a silyl group. Initially, they thought to form an organometallic species through insertion of the C–Br bond. However, they found cross-electrophile coupling to be milder and more effective, giving product in 66% yield. This saved four steps and increased the overall yield by more than 30%. Application of Ni-Catalyzed XEC in the Synthesis of GPR55 Agonists (2017) In a report detailing the synthesis of (+)-vitepyrroloid A and (+)-vitepyrroloid B, Christmann and co-workers employed a late stage Ni-catalyzed cross-electrophile coupling with complex coupling partners (Scheme 246).367 With an alkyl iodide and a heteroaryl bromide in hand, they sought to find a method that would eliminate the need for protecting groups and tolerate protic functionality. After testing multiple nickel- or palladium-based systems they found a hit with cross-electrophile coupling in 12% yield. This reaction was later optimized with the addition of NaI (2 equiv) and an increase in temperature affording 57% yield of product. Late-Stage Application of Ni-Catalyzed XEC for the Synthesis of (+)-Vitepyrroloid A and (+)-Vitepyrroloid B (2018) Hegui Gong, Yu Peng, and co-workers presented the divergent total syntheses of the diketopiperazine alkaloids (+)-asperazine and (+)-pestalazine A. These syntheses proceed through a common intermediate constructed through cross-electrophile coupling of a tertiary alkyl chloride and iodotryptophan fragment (Scheme 247).368 As a result of this strategy, the syntheses of (+)-asperazine and (+)-pestalazine A was completed in an average overall yield of 14% and longest linear sequences of ten steps each. Furthermore, the preparation of two additional diketopiperazine alkaloids were achieved in similar yields with straightforward modification of the synthetic sequence. XEC of Aryl Iodide with Alkyl Chloride Intermediates in the Total Synthesis of (+)-Asperazine and (+)-Pestalazine (2018) Gellman and co-workers applied the cross-electrophile coupling of aryl bromides with alkyl bromides as a key step in the total synthesis of robustol (Scheme 248).369 The coupling tolerated both boronate ester and phenol functionalities (the latter in a lower yield), which enabled further derivatization. Subsequent Chan-Lam coupling of the two fragments and aldol macrocyclization using foldamer catalysis afforded the natural product. Synthesis of Robustol with Two Intermediate XEC Procedures Followed by Foldamer Catalysis (2019) (a) L = phen, 65 °C, (b) L = 4,4′-MeObpy, 75 °C. In 2020, Bristol Myers Squibb, led by Vaidyanathan, disclosed a cross-electrophile coupling reaction between 2-chloropyridine and ethyl 3-chloropropanoate completed at a multikilogram scale (Scheme 249).47 This report contains systematic studies on Mn powder activation (including using focused beam reflectance measurements), a new activating agent for Mn (TESCl), and systematic studies on stirring/reactor design for XEC reactions. Considerable detail is provided in the use of modeling and small-scale test reactions to determine the appropriate mixing speed to suspend the Mn in a given reactor geometry/stirrer combination. The title cross-coupling reaction was executed with 7 kg of aryl bromide to give the desired product in 64% yield (5.7 kg). Cross-Coupling of Derivatized 2-Chloropyridine and Ethyl 3-Chloropropanoate Through a Ni-Catalyzed Protocol (2020) Baran and co-workers, in collaboration with Minakem, described the formal synthesis of silodosin using the decarboxylative cross-electrophile coupling of an NHP ester and iodoindoline intermediate as a key combinatorial step (Scheme 250).370 Previous approaches to this molecule have utilized either a hydrogenation/Curtius pathway371 or a reductive amination based strategy.372−374 By employing cross-electrophile coupling, the authors were able to take a more convergent approach to the synthesis and to lower the longest linear sequence to seven steps. Synthesis of (R)-Silodosin Involving a Key XEC Step Between an Aryl Iodide and NHP ester (2021) In collaboration with Merck, the University of Pennsylvania, and RTI International, MacMillan and co-workers applied cross-electrophile coupling for the synthesis of positron emission tomography (PET) radioligands (Scheme 251).375 These compounds, containing tritium or carbon-11 labels could serve as competent characterization tools for diseases and drug candidates. The methylation reactions they proposed install either a tritritiomethyl or 11C-methyl group from [CT3] methyl 1-naphthalenesulfonate (CT3ONp) and [11C]iodomethane, respectively. Success of coupling was monitored by radiochemical yield (RCY), with the aim of obtaining higher than 10%. They achieved this goal with most targets and were able to apply their conditions to substrates with protic functional groups. Due to the stability of the −CT3 source they chose, this method could be viable for applications where volatile precursors are traditionally avoided. To test the possibility of use in the medical field, they conducted PET imaging on a nonhuman primate using one of the 11C-labeled molecules isolated. Nickel/Photoredox-Enabled Methylation Conditions for Radiolabeling (2021) (a) All yields given as radiochemical yields (RCY). (b) Conditions: NiBr2 (10 mol%), dtbbpy (12 mol%), [Ir(dF(CF3)ppy)2)(dtbbpy)]PF6 (1 mol%), (TMS)3SiH (3 equiv), LiBr (2 equiv), and 2,6-lutidine (5 equiv) in 1:1 DMA/toluene at rt, 450 nm LEDs. (c) Modified conditions: NiBr2(dtbbpy) (80 mol%), [Ir(dF(CF3)ppy)2(dtbbpy)]PF6 (4 mol%), and LiI (5 equiv) in acetone (0.01 M). (d) Conditions: NiBr2 (0.75 μmol), dtbbpy (0.9 μmol), [Ir(dF(CF3)ppy)2)(dtbbpy)]PF6 (75 nmol), (TMS)3SiH (9 μmol), TBAI (2.4 μmol), and 2,6-lutidine (15 μmol) in acetone at rt, 450 nm LEDs. Alkylated Alkenes Overview Alkenyl electrophiles (such as vinyl halides, vinyl triflates, or vinyl acetates) react in cross-electrophile couplings analogously to aryl electrophiles, but it is common that distinct conditions from aryl–alkyl coupling are required for efficient vinyl–alkyl coupling.376 This can be attributed to faster rates of oxidative addition and faster rates of homocoupling. This commonly results in rapid homocoupling of the vinyl–X partner before consuming the alkyl–X species. Nonetheless, strategies have emerged to promote cross-selectivity, such as lowering catalyst loading or using more activated alkyl–X electrophiles (such as benzyl–X or alkyl iodides) to better match reactivity. The challenge of E/Z stereochemistry is an extra consideration for vinyl electrophiles. First, synthesis of the electrophiles with the desired stereochemistry can present a challenge. Second, the coupling reaction can result in erosion of stereochemistry. Despite this extra challenge, the diversification of a single vinyl electrophile to a wide array of substituted alkenes with stereocontrol is a major advantage of this approach. Conventional stereoselective olefination methods (e.g., Wittig, Horner-Wadsworth-Emmons modifications, Julia, etc.) often do not tolerate protic and electrophilic functional groups as well as cross-electrophile coupling. In this section we describe cross-electrophile coupling reactions that have been directly optimized on a vinyl–X coupling partner. Despite this, the optimal ligands are similar to the Aryl–Alkyl section (Figure 28, Figure 29). Enantioselective couplings and total syntheses employing vinyl–X electrophiles are highlighted. We note that conditions optimized for aryl–alkyl coupling often work to some extent for vinyl–alkyl couplings (see section 4.2) (refs (41, 50, 71, 174, 206, 219, 232, 243, 244, 268, 269, 278, 279, 283, 289, 294, 297, 305, 308, 309, 311, 353, 354, and 359)). Vinyl–alkyl couplings that are known to proceed via in situ Zn or Mg insertion into alkyl halides and concurrent Negishi/Kumada cross-coupling will not be covered in this review.377,378 Another class of reactions that is easily confused with XEC chemistry involve reductive, metal-mediated radical formation followed by substrate radical capture and bond formation that does not involve a metal catalyst.379−381 This is prominent with styryl electrophiles and tertiary radicals, for example.379−381 We note again that this is merely categorization–these are often excellent reactions that have all of the advantages of XEC reactions. Ligands used in vinyl–alkyl XEC reactions.*Denotes chiral center. Distribution of ligands used in vinyl–alkyl XEC reactions. XEC of Vinyl Halides with Alkyl Electrophiles An early example of vinyl cross-electrophile coupling was reported by Condon and Durandetti in 2000. They developed an electrochemical cross-electrophile coupling that could form C–C bonds from vinyl iodides, bromides, and chlorides with α-chloroketones, esters, and nitriles in an undivided cell (Scheme 252).126,382 They also demonstrated XEC of vinyl halides with aryl and vinyl electrophiles (see section 3.3.1.1, Scheme 42). They noted that vinyl iodides were susceptible to dimerization due to their increased reactivity, but this could be overcome through slow addition of the vinyl coupling partner to the alkyl halide in solution. Cross-coupled products in some cases retained the olefin geometry of the starting vinyl halide, with the degree of isomerization being variable. Electrochemical XEC of Vinyl Halides with Alkyl Chlorides (2000) In 2016, our group reported improved conditions from our initial report44 for the Ni-catalyzed cross-electrophile coupling of vinyl bromides with alkyl halides (Scheme 253).383 Key to the success of this approach was low catalyst loadings (2.5 mol%) to minimize undesired vinyl homodimerization. The dimerization appears to involve transmetalation between two vinylnickel(II) species, but the cross-product formation is closer to first order in nickel concentration. A variety of unhindered styryl and β-alkyl-substituted (Z)-vinyl bromides could be cross-coupled with alkyl bromides in high yields and good retention of olefin geometry. An (E)-vinyl bromide could also be coupled by lowering catalyst loading further to 0.5 mol% and employing a more electron-rich ligand, 4,4′-MeObpy. Control experiments suggested any olefin isomerization, when observed, occurred prior to C–C bond formation. These conditions were also directly applicable to the coupling of aryl bromides with alkyl bromides. Ni-Catalyzed Cross-Electrophile Coupling of Vinyl Bromides with Alkyl Halides With NiI2(4,4′-MeObpy) (0.5 mol%) as catalyst. The Gong group reported on a series of XEC reactions of vinyl halides with both activated and unactivated alkyl halides. In 2016, Hegui Gong, Xinghua Zhang, and Ken Yao developed conditions for the Ni-catalyzed vinylation of α-halocarbonyls (Scheme 254).384 When applying styryl bromides in this protocol, pyridine was sufficient as the sole ligand, while β-alkyl-substituted vinyl halides required both bpy and pyridine for efficient reactivity. Both di- and trisubstituted olefin products could be accessed. Employing (E)-vinyl halides yielded the (E)-olefin product, while (Z)-vinyl halides isomerized, favoring the (E)-product. The authors propose a radical chain mechanism. Ni-Catalyzed Cross-Electrophile Coupling of α-Halocarbonyl Derivatives with Vinyl Bromides (2016) (a) MgCl2 (1 equiv) was added. (b) bpy (30 mol%) was added. Later in 2017, Hegui Gong, Kunhua Lin, Qun Qian and co-workers reported the nickel cross-electrophile coupling of vinyl bromides with unactivated alkyl halides (Scheme 255).385 As with their previous XEC reaction of vinyl bromides and α-halocarbonyls, pyridine was the sole ligand for this transformation. Styryl and β-alkyl substituted vinyl bromides were both applicable under these conditions. Retention of olefin geometry of the substrate was observed in all examples, except for the coupling of (Z)-1-bromo-1-nonene, which isomerized from 99:1 Z/E vinyl bromide to 85:15 Z/E in the cross-product. Di- and trisubstituted vinyl bromides could be coupled, including nonstyryl-α-substituted vinyl bromides. One example of a tetrasubstituted olefin was also shown, albeit in a low yield. Cross-Electrophile Coupling of Vinyl Bromides with Unactivated Alkyl Bromides (2017) Hegui Gong and co-workers then extended their Ni-catalyzed vinylation strategy to prepare α-C-linked glycosides. The authors optimized two sets of conditions for the cross-coupling of glycosyl halides with aryl iodides (see section 4.2.1.1, Scheme 97) and with vinyl bromides (Scheme 256).220 For glucosyl bromides, reported Ni, Fe, and Co cross-coupling reactions afforded either high β-selectivity or an unselective mixture of anomers. In contrast, their Ni-catalyzed XEC conditions provided good to excellent α-diastereoselectivity in the vinylation of glucose (as well as galactose, mannose, and maltose derivatives). This unusual selectivity appeared to arise from the monodentate pyridine ligand: bidentate and tridentate ligands provided lower α/β selectivity (2.8:1 to 1:1). The authors propose that the lability of pyridine and decreased steric profile are responsible. Stereoselective Preparation of α-C–Vinyl Glycosides via Ni-Catalyzed XEC of Glycosyl Bromides with Vinyl Bromides (2018) With 10 mol% Ni(ClO4)2•6H2O. Following their 2018 report, Hegui Gong, Chuanhu Lei, and Jiandong Li then reported modified conditions for β-selective cross-electrophile coupling of glycosyl bromides with aryl and vinyl halides (Scheme 257).221 As previously, distinct conditions were required for coupling aryl iodides (see section 4.2.1.1, Scheme 98) and for coupling vinyl bromides. Glucose- and galactose-derived alkyl halides could be employed in this protocol, but mannosides only afforded the α-anomer. The authors propose that diastereoselectivity arises from favorable β-attack of nickel to the boat conformation of the glucosyl radical, minimizing steric interactions between the glucoside substituents and the bulky ttbtpy ligand on the nickel center. Stereoselective Preparation of β-C–Vinyl Glycosides via Ni-Catalyzed XEC of Glycosyl Bromides with Vinyl Bromides (2019) With glycosyl bromide (2 equiv) and MgCl2 (15 mol%) at 25 °C. The Gosmini group applied their cobalt cross-electrophile coupling catalyst system to the coupling of styryl bromides with primary benzyl chlorides (Scheme 258).386 To achieve high yields, the authors noted the importance of preforming the CoBr2(PPh3)2 complex and employing TMSCl as an additive for manganese activation. A variety of electron-donating and electron-withdrawing substituents could be incorporated on either coupling partner, but β-alkyl substituted vinyl bromides provided no yield under reaction conditions. Importantly, they showed that this coupling proceeds with high retention of olefin E/Z stereochemistry, even for (Z)-olefins. Cobalt-Catalyzed Cross-Electrophile Coupling of Styryl Bromides with Benzyl Chlorides (2017) Ukaji, Suga, Takahashi and co-workers reported a nickel/titanium system to cross-couple vinyl bromides with benzyl alcohols (Scheme 259).387 These are proposed to proceed without preactivation of the alcohol; instead, a low-valent titanium species initiates C–OH bond scission and generates the alkyl radical. Radical capture by a vinylnickel(II) species, followed by reductive elimination would then yield the product. The authors noted the judicious selection of ligand for nickel and titanium complex was important for each combination of coupling partner. In general, E/Z olefin geometry was retained, but when mixed vinyl bromides were used, they saw faster consumption of the (E)-isomer. With additional optimization, a fully tetrasubstituted vinyl bromide was successfully coupled in good yield. Cross-Electrophile Coupling of Benzyl Alcohols with Alkenyl Halides Using a Ni/Ti/Mn System (2020) (a) L = 3,4,7,8-Mephen. (b) With vinyl bromide (1.2 equiv) and 2,6-lutidine instead of collidine. (c) With vinyl bromide (3.0 equiv) and 2,6-lutidine instead of collidine. (d) L = 4,7-MeOphen. Baran, Anderson, Abruña, and co-workers reported an electrochemical approach to assemble terpene fragments through decarboxylative cross-electrophile coupling of vinyl iodides with NHP esters (Scheme 260).388 Key to the success of this strategy is the addition of silver salts that modify the surface of the RVC (carbon) cathode. The carboxylic acid could be activated as the NHP ester in situ, complete retention of olefin geometry was observed, and reactions tolerated the presence of sensitive functionality (e.g., free carboxylic acids, epoxides). This method was showcased in the preparation of 13 terpene-based natural products (see section 4.3.5Scheme 297) and in a 100-g reaction conducted using a recirculating flow system. A series of spectroscopic experiments revealed that silver nanoparticles are deposited on the surface of the cathode, lowering the electrode’s potential by +0.51 V. This effectively lowers the overpotential of the system and inhibits over-reduction of the nickel catalyst. This prevents deposition of the catalyst on the cathode, which can occur when the reaction is run at higher potentials. Electrochemical Cross-Electrophile Couplings of Vinyl Iodides with N-Hydroxyphthalimide Esters to Prepare Terpene Natural Products (2022) With alkyl bromide instead of NHP ester. An approach for the preparation of β,γ-unsaturated carbonyls through the Ni-catalyzed cross-electrophile coupling of vinyl bromides with oxalate-activated α-hydroxy carbonyls was developed by Fan Wu and co-workers (Scheme 261).389 An excess of imidazole was utilized instead of more common bi- or tridentate ligands. Electron-rich styryl bromides coupled well in this approach, as did oxalates derived from esters, ketones, and lactones. Ni-Catalyzed Cross-Electrophile Coupling of Oxalates Derived from α-Hydroxy Carbonyls with Vinyl Bromides (2022) Tian Xie, Xiang-Yang Ye, Yang Ye and co-workers described a strategy for the XEC of vinyl bromides with allylic acetates to prepare 1,4-dienes (Scheme 262).390 They noted that conditions previously reported for coupling aryl halides with allylic acetates (see section 4.2.5.5, Scheme 195)310 gave low yields in the targeted vinyl allylation, and reoptimization of reaction conditions was necessary. Primary, secondary, and tertiary allylic acetates could be applied in good yields and excellent regioselectivity for the linear over branched products was observed. In addition to vinyl bromides, the corresponding chlorides, iodides, and triflates were compatible coupling partners. (E)- and (Z)-vinyl halides were both competent in this protocol with complete retention of olefin geometry. The authors highlighted their method in analogue syntheses of the β-elemene scaffold, a broad-spectrum antitumor natural product. The triazole containing β-elemene analog (Scheme 261, bottom right) exhibited increased potency in vivo in cancer cell lines. Ni-Catalyzed Cross-Electrophile Coupling of Vinyl Bromides with Allylic Acetates (2022) Ming Joo Koh, Gong Chen, and co-workers showcased an iron-catalyzed XEC approach to prepare C-linked glycosides by coupling chlorosugars with vinyl electrophiles (Scheme 263).391 While reactions with (E)-vinyl bromides appear to proceed by a pure radical addition/elimination process that is not a cross-electrophile coupling, (Z)-vinyl halides can be coupled stereospecifically with a nickel cocatalyst through an XEC mechanism. The authors also demonstrated that vinyl iodides and triflates, alkynyl iodides, and several classes of heteroaryl chlorides were all compatible with this protocol. Mechanistic studies were consistent with formation of a glycosyl radical by the iron salt followed by radical addition/elimination or a nickel mediated coupling process (depending upon the conditions). This reaction generally proceeds with high diastereoselectivity, dictated by radical addition/capture at the less-hindered face of the glycosyl radical. This method was demonstrated in two short syntheses of the anticancer agent (+)-varitriol and a fluorinated analogue. Iron and Nickel Co-Catalyzed Cross-Electrophile Coupling of Vinyl Electrophiles with Glycosyl Chlorides (2022) (a) X = Br. (b) X = I. (c) X = OTf. Honggen Wang, Xu-Ge Liu, and co-workers reported an approach to prepare C-glycosides through the Ni-catalyzed cross-electrophile coupling of alkenyl glycoside iodides with NHP esters and N-alkylpyridinium salts (Scheme 264).392 Primary, secondary, and tertiary NHP esters all coupled effectively in this protocol. With modified conditions, secondary N-alkylpyridiniums also coupled well in this approach. Ni-Catalyzed Cross-Electrophile Coupling of Vinyl Glycosyl Iodides with NHP Esters and N-Alkyl Pyridiniums (2023) (a) With NiBr2(dme), dtbbpy, Zn (3 equiv), X = NHP ester. (b) With NiCl2(dme), bpy, Mn (2 equiv), X = [N+]. Yong Qin, Zhenlei Song, and co-workers described a strategy to couple sterically hindered 2-bromocycloalkenyl carboxylic acids with alkyl bromides (Scheme 265).393 Notably, the free carboxylic acid did not cause significant side-reactivity. Primary alkyl bromides bearing varied functionality (such as nitrile, aldehyde, and acidic protons) coupled effectively. More sterically hindered secondary alkyl bromides could also be coupled by switching the additive to 3 equiv NaI instead of TFA. Cyclic vinyl bromides of various sizes (5–8 membered rings), including those derived from steroidal frameworks, could be coupled in this protocol. Despite the similarity of the conditions to typical XEC conditions (DMSO vs amide solvent, room temperature conditions, etc.), control experiments showed that the carboxylic acid was essential for productive reactivity. This suggests the group directs oxidative addition or stabilizes the resulting intermediate. Further experiments with the radical clock 6-bromo-1-hexene showed the degree of rearrangement to be independent of catalyst concentration, consistent with a radical rebound process or an outer-sphere radical addition process. Carboxylic Acid-Assisted, Ni-Catalyzed Cross-Electrophile Coupling of Cycloalkenyl Bromides with Alkyl Bromides (2023) With NaI (3 equiv) instead of TFA. Wen-Jing Xiao and König reported a dual catalytic protocol for the alkenylation of primary, secondary, and tertiary alkyl bromides based upon the previously reported silyl radical XAT strategy by the MacMillan group43 (Scheme 266).394 Two classes of reactions were demonstrated in this work: radical additions into vinyl sulfones (not shown) and cross-electrophile coupling of vinyl bromides with alkyl bromides (Scheme 266). Consistent with MacMillan’s studies, (TMS)3Si• radical is proposed to react with the alkyl halide to form the alkyl radical. Both di- and trisubstituted vinyl bromides could be applied in good yields, although E/Z ratios were modest in products with olefin stereochemistry (1.5:1 to 3:1 E/Z ratios). Alkenylation of Unactivated Alkyl Bromides through Visible Light Photocatalysis and Silyl Radical XAT (2019) Junkai Fu, Tao Wang, and co-workers reported the nickel photoredox cross-electrophile coupling of styryl bromides with tertiary alkyl bromides (Scheme 267).395 TMEDA was used as the terminal reductant and the combination of NHC-1 and MgCl2 provided the highest yields. The role of NHC-1 was somewhat unclear but had a notable effect. High (E)-selectivity was observed regardless of the starting configuration of the vinyl bromide. While radical addition followed by elimination does not require nickel catalysis,380 the authors propose nickel mediates C–C bond formation as well as radical generation. Given some of the success with enantioselective versions of these reactions (see section 4.3.4), this is a reasonable proposal. Dual Nickel- and Photoredox-Catalyzed Cross-Electrophile Coupling of Styryl Halides and Unactivated Tertiary Alkyl Bromides (2019) TMHD = 2,2,6,6-tetramethyl-3,5-heptanedione. The Stecko group reported a nickel/iridium photocatalytic cross-electrophile coupling of nonstyryl vinyl bromides with alkyl bromides to form versatile chiral allyl carbamates (Scheme 268).396 The authors applied chiral bromoallylic carbamates as substrates, and the stereocenter was preserved throughout the reaction. Importantly, complete retention of E/Z olefin geometry was also observed. Broad functional group tolerance was demonstrated, including epoxides, phosphonates, boronate esters, free alcohols, and acetals. The alkyl coupling partner scope was also broad, including 1°, 2°, and 3° alkyl bromides (3° required different conditions). In the case of activated alkyl coupling partners (e.g., benzyl), the authors found that utilizing a non-XEC nickel photoredox coupling of the carboxylic acid provided better results. Nickel/Photocatalytic Vinyl Cross-Electrophile Coupling to Prepare Chiral Allyl Carbamates (2020) (a) With Ni(TMHD)2 (10 mol%) as catalyst. (b) Racemic vinyl bromide was used. Stecko and co-workers applied their previous conditions396 to the related amine-functionalized vinyl bromides to form useful chiral, branched allylamines from 3-bromoallylamines (Scheme 269).397 A variety of N-protecting groups could be tolerated, and the substrate scope of alkyl substitution was broad, in analogy to their previous work. Nickel/Photocatalytic Vinyl Cross-Electrophile Coupling to Prepare Chiral Allyl Amines (2021) gem-Difluoroalkenes represent a distinct class of electrophile for cross-electrophile couplings. Yao Fu, Tian-Jun Gong, and co-workers reported the cross-electrophile coupling of gem-difluoroalkenes with secondary and tertiary alkyl halides (Scheme 270).398 This monofluorovinylation process proceeds with excellent (Z)-stereoselectivity. The authors demonstrated a broad substrate scope with sensitive functionality, such as heterocycles, aldehydes, and acidic protons. They also showed regioselectivity of tertiary alkyl bromides to be high in the presence of secondary and primary alkyl bromides. Mechanistic experiments ruled out the formation of borylated species and in situ, and radical cyclization experiments showed alkyl radicals are generated from the alkyl halide. While radical addition to difluoroalkenes does not always require nickel catalysis,399 the authors propose nickel capture of the benzyl radical intermediate and β-fluoride elimination to afford the cross-coupled product. The authors showcased the utility of their method in the synthesis of substituted alkenylated prolines and the preparation of a LIM kinase inhibitor analogue. Defluorinative Cross-Electrophile Coupling of gem-Difluoroalkenes with Unactivated Secondary and Tertiary Alkyl Halides (2017) Exploiting the propensity of unactivated alkyl bromides to undergo chain-walking type processes, Chao Feng and co-workers reported the migratory fluoroalkenylation of alkyl bromides containing a terminal aryl group (Scheme 271).400 The authors propose oxidative addition of nickel to the alkyl bromide followed by chain-walking to form a benzylnickel species that then reacts with the difluoroalkene to form the coupled product. Alkyl chains of 2–5 carbons could be applied, albeit yields were lower for longer chains. Yb(OTf)3 was found to be a necessary additive that offered improved yields to more conventional Lewis acidic additives. An experiment with stoichiometric nickel catalyst and ligand still required the ytterbium salt for high yields, which may indicate the additive’s role is activating the difluoroalkene for addition and C–C bond formation. Ni-Catalyzed Migratory Fluoroalkenylation of Unactivated Alkyl Bromides with gem-Difluoroalkenes (2019) XEC of Vinyl Triflates and Acetates with Alkyl Electrophiles While the majority of vinyl cross-electrophile couplings have used vinyl bromides (or other vinyl halides), these substrates can be relatively difficult to access in stereodefined way. This has driven interest in the use of vinyl triflates and acetates, which can be generated from ketones and leverage techniques for stereoselective enolate generation. Early studies focused on aryl halides had noted that vinyl triflates could react under related conditions,41 but more recently more systematic reports have appeared. Xuebin Liao and co-workers reported the decarboxylative XEC of alkyl carboxylic acid anhydrides with a variety of vinyl triflates and halides (Scheme 272).401 In these reactions pyridine N-oxide reacts with the anhydride to form an O-acylated species that can be reduced to form pyridine, CO2, and the alkyl radical. Notably, methylation and ethylation of vinyl triflates could be achieved. Olefin geometry was largely retained, especially in cases with vinyl iodides. Due to the reaction’s high chemoselectivity for alkyl carboxylic acids, mixed anhydrides with p-anisic or p-toluic acid could also be used in this protocol. This enables the application of more valuable alkyl carboxylic acids as mixed anhydrides to avoid wasting 1.5 equiv of acid from the symmetrical anhydride. Ni-Catalyzed Decarboxylative Alkenylation of Anhydrides with Vinyl Triflates and Halides (2019) (a) With phen as ligand. (b) With bpy as ligand. The group of Xing-Zhong Shu reported the XEC of vinyl acetates with benzyl trimethylammonium salts to form allylated arenes (Scheme 273).290,402 Both styryl and β-alkyl-substituted vinyl acetates could be effectively coupled in this protocol, but fully substituted or unsubstituted vinyl acetates did not work as well. The authors also showed a few examples of aryl ammonium salts derived from anilines, as well as aryl triflates (see section 4.2.4.2, Scheme 173), in this cross-coupling. Studies showed that the benzyl ammonium coupling partners are a source of benzyl radical, rather than undergoing direct oxidative addition with nickel. Ni-Catalyzed Cross-Electrophile Coupling between C–N and C–O Electrophiles (2019) Continuing their work with C–O electrophiles, Xing-Zhong Shu and co-workers reported conditions for the XEC of vinyl triflates with alkyl mesylates (Scheme 274).403 As has been observed before, iodide (from the precatalyst) turns on reactivity by generating a constant, low concentration of alkyl iodide. Cyclic vinyl triflates reacted most effectively under these conditions, but acyclic vinyl triflates could also be employed by switching the alkyl coupling partner to the more reactive alkyl tosylate and adding 0.5 equiv of NaI. In these cases, isomerization of the olefin geometry occurred. In the same report they also demonstrated that peptide-based aryl triflates derived from tyrosine could be cross-coupled effectively with alkyl tosylates. Ni-Catalyzed Cross-Electrophile Coupling of Vinyl Triflates with Alkyl Sulfonates (2019) With alkyl tosylate instead of alkyl mesylate. Xing-Zhong Shu and co-workers then reported an approach to prepare allylboronates through the XEC of vinyl triflates with α-chloroboronates (Scheme 275).404 This approach enabled straightforward access to cyclic allylboronates, which are versatile reagents. Acyclic vinyl triflates could also be applied by changing the ligand from bpy to Bphen. Ni-Catalyzed Cross-Electrophile Coupling of Vinyl Triflates with α-Chloroboronates (2020) More recently, Xing-Zhong Shu and co-workers reported conditions for the XEC of vinyl acetates with primary and secondary alkyl bromides (Scheme 276).405 The vinyl acetate scope was notable: not only styryl acetates, but also those derived from cyclic ketones or 1,3-diones were effective (with small changes to the conditions). However, nonconjugated acyclic vinyl acetates reacted with lower yields and isomerization of olefin geometry. Functional-group compatibility included nitrile, ketone, aldehyde, and free phenol. Stoichiometric experiments with a nickel(0) complex afforded no consumption of the vinyl acetate, but the analogous nickel(I) complex was able to generate product without external reductant. Additionally, radical cyclization experiments with 6-bromo-1-hexene indicated that radical formation and capture happen at two different nickel centers. Ni-Catalyzed Cross-Electrophile Coupling of Alkenyl Acetates with Alkyl Bromides (2022) As an extension of their pioneering work (see section 4.2.1.1, Scheme 96)219 on tertiary alkyl cross-coupling, Hegui Gong, Guobin Ma, and co-workers reported conditions to couple vinyl triflates with substituted chloro-hexahydropyrroloindolines (Scheme 277).406 Complementary conditions for coupling cyclic and acyclic vinyl triflates were developed. In cases with olefin geometry, (E)-selectivity was observed in more hindered couplings, but mixtures of olefin isomers were observed with less hindered disubstituted vinyl triflates. Control experiments suggested that (Z)-vinyl triflates partially isomerize under reaction conditions to the less sterically hindered (E)-vinyl triflate, accounting for the overall (E)-selectivity for the cross-product. Ni-Catalyzed XEC of Chloro-Hexahydropyrroloindoline Derivatives with Vinyl Triflates (2021) Modified Conditions: With vinyl triflate (2.5 equiv), NiBr2(bpy) (12 mol%), Zn (3 equiv), MgCl2 (60 mol%), and DMA at 30 °C. Hegui Gong, Xiaotai Wang, and co-workers described a method to prepare α-functionalized amino acids by XEC of α-pivaloyloxyglycine with vinyl electrophiles (Scheme 278).407 This process formed the (E)-olefin products, even when mixtures of vinyl bromide isomers were employed. Di-, tri-, and tetrasubstituted vinyl bromides could be applied in this reaction (Method A), and vinyl triflates could also be coupled with modified conditions (Method B). Furthermore, several examples with aryl halides were also demonstrated, affording the analogous α-arylated amino acids. Based upon a series of mechanistic and computational experiments, the authors proposed glycine radical formation and that (L)NiII(Ar)X was off-cycle. Computational studies suggested that a “radical first” pathway was viable with subsequent vinyl halide oxidative addition and reductive elimination. Ni-Catalyzed Cross-Electrophile Coupling of C(sp2) Triflates/Halides with α-Pivaloyloxy Glycine (2021) (a) With X = Br, [Ni] = NiBr2, and MgCl2 (1.5 equiv). (b) With X = OTf, [Ni] = NiCl2(Py)4, and MgCl2 (2.0 equiv). Deli Sun, Qun Qian, Yunrong Chen, and co-workers adapted the glycine radical strategy to the diversification of short peptides through the cross-electrophile coupling of vinyl halides/triflates with α-tosylglycine-containing di- and tripeptides (Scheme 279).408 The coupling proceeds with modest diastereoselectivity (ranging from 1:1 to 3.5:1 dr) but does not epimerize any of the stereocenters on the other amino acids within the peptide. A few examples with aryl iodides were also demonstrated. Ni-Catalyzed Cross-Electrophile Coupling of α-C-Tosyl Peptides with C(sp2) Triflates/Halides (2021) (a) With X = OTf and [Ni] = NiCl2(Py)4. (b) With X = Br and [Ni] = NiBr2. Weichao Xue, Ken Yao, and Xianghua Tao reported an approach to synthesize β,γ-unsaturated ketones through XEC of vinyl triflates with oxalates derived from of α-hydroxy esters (Scheme 280).409 Cyclic vinyl triflates coupled best but some acyclic vinyl triflates also could be utilized. In addition to α-hydroxy esters, α-hydroxy lactones and α-hydroxy ketones could be coupled in good yields, but low yields were observed with tertiary alkyl oxalates. The authors disclosed a preliminary result for an enantioconvergent coupling with low levels of enantiocontrol (15% ee) and showed that the reaction likely proceeds through a radical-based mechanism through radical trapping experiments. Ni-Catalyzed Cross-Electrophile Coupling of α-Hydroxy Carbonyl-Derived Oxalates with Vinyl Triflates (2021) Lingling Chu and co-workers demonstrated a metallaphotoredox approach to prepare stereodefined 1,4-dienes through XEC of vinyl triflates with allylic carbonates (Scheme 281).410 The triplet energy of the photocatalyst alters the stereochemistry of the final product. The lower energy Ru(bpy)3(PF6)2 catalyst affords the (E)-product because the product is not isomerized. The higher triplet energy of Ir(ppy)2(dtbbpy)PF6 (ET = 51.0 kcal/mol) affords the (Z)-product by preferential isomerization of the (E)-isomer.411 This reaction yields the linear product regardless of whether the linear or branched allylic carbonate was employed. Nickel/Photoredox Stereodivergent Cross-Electrophile Coupling of Vinyl Triflates with Allylic Carbonates (2020) (a) With Ru(bpy)3(PF6)2 as photocatalyst. (b) With Ir(ppy)2(dtbbpy)PF6 as photocatalyst. Stereocontrolled XEC of Vinyl–X with Alkyl–X The Reisman group has pioneered a series of enantioselective cross-electrophile couplings of vinyl and alkyl electrophiles. In 2014, they reported an enantioconvergent cross-electrophile coupling of vinyl bromides with racemic secondary benzyl chlorides (Scheme 282).412 The best results were obtained with an indanyl-substituted bisoxazoline ligand BOX-1, which improved both selectivity for cross-product and enantioselectivity in comparison to other substituted bisoxazoline ligands. A variety of disubstituted alkenes with α-stereocenters could be accessed in 88–97% ee. (E)-vinyl bromides reacted without olefin isomerization, while (Z)-vinyl bromides reacted sluggishly and were susceptible to isomerization. Follow-up mechanistic work demonstrated that nickel(I)-BOX-1 intermediate reacts with both vinyl bromide (oxidative addition) and the benzyl chloride (halogen atom transfer). Computational studies suggested that the enantiodetermining step is dictated by the facial selectivity of the radical addition, and subsequent reductive elimination is rapid.42 Ni-Catalyzed Enantioselective Cross-Electrophile Coupling of Vinyl Bromides with Benzyl Chlorides (2014) Continuing their work on enantioselective cross-electrophile vinylation, Reisman and co-workers reported an alternative approach to the above products by the coupling of vinyl bromides with racemic α-aryl NHP esters (Scheme 283).413 The combination of TDAE and TMS–Br was important for achieving high yields, and indanyl-substituted BOX-1 was again the ligand of choice. The authors demonstrated a broad substrate scope and showcased how NHP esters can be applicable in this cross-coupling protocol in cases where the benzyl chloride is unstable (e.g., in alkyl coupling partners containing an α-methoxy substituent). Subsequent detailed mechanistic studies from the Reisman group elucidated the role of TMS–Br as a Lewis acid and showed how radical formation is independent of nickel.42 This second study has a wealth of useful mechanistic information. Ni-Catalyzed Enantioselective Cross-Electrophile Coupling of Vinyl Bromides with N-Hydroxyphthalimide Esters (2017) In 2018, Reisman and co-workers applied their enantioselective cross-electrophile coupling strategy to couple vinyl bromides and chlorobenzyl silanes (Scheme 284).224 The cobalt phthalocyanine [Co(Pc)] additive was important for high yields, possibly due to increasing the rate of radical generation at the benzyl chloride (as was observed for related racemic coupling reactions with aryl halides, see section 4.2.5.1, Scheme 176).174 As with their previous work, indanyl-substituted BOX-1 was the best-performing ligand for controlling enantioselectivity. A broad array of disubstituted (E)-alkenes reacted in good yields with retention of olefin geometry, but the authors noted (Z)-alkenes, as well as tri- and tetrasubstituted alkenes were unreactive in this protocol. The chiral allylic silanes formed were applied to Hosomi-Sakurai reactions, heterocycle synthesis, and the preparation of the natural product (+)-tashiromine with excellent retention of stereochemistry from the silane. Ni-Catalyzed Cross-Electrophile Coupling of Vinyl Bromides with Chlorobenzyl Silanes (2018) The Reisman Group then reported the first example of an electrochemically driven enantioselective cross-electrophile coupling reaction. This protocol enabled the coupling of vinyl bromides with secondary benzyl chlorides in an undivided cell with a zinc sacrificial anode (Scheme 285).414 Careful selection of cathode, anode, current density, and electrolyte were critical for high yields and enantioselectivity. A broad range of electronics on both coupling partners were tolerated, and ligand control of diastereoselectivity was observed when a (−)-citronellal-derived vinyl bromide was employed. Enantioselective Electrochemical Cross-Electrophile Coupling of Vinyl Bromides with Benzyl Chlorides via Nickel Catalysis (2019) Zhuanzhi Shi and co-workers reported an enantioselective cross-electrophile coupling of gem-difluoroalkenes with secondary benzyl chlorides (Scheme 286).415 The ester group on the difluoroalkene is proposed to act as a directing group to facilitate oxidative addition into the adjacent C–F bond, rendering the process highly stereoselective in terms of olefin geometry. The authors noted removal of sodium iodide, potassium phosphate, or molecular sieves led to no reactivity. Control experiments supported intermediacy of a benzyl radical and ruled out in situ formation of borylated intermediates. While radical additions to difluoroalkenes are known,399 the high enantioselectivities provide strong evidence for a nickel-mediated mechanism. Ni-Catalyzed Stereo- and Enantioselective Cross-Electrophile Coupling of gem-Difluoroalkenes with Benzyl Chlorides (2022) All of the previous examples proceeded by secondary benzylic radical intermediates. Fan Wu, Deli Sun, and co-workers expanded enantioconvergent XEC to the coupling of racemic α-chlorosulfones with styryl bromides (Scheme 287).416 Indanyl-substituted BOX-2 was employed as the chiral ligand in this transformation. Control experiments supported that cross-coupling proceeds through radical formation at the α-chlorosulfone. Ni-Catalyzed Enantioselective Cross-Electrophile Coupling of Vinyl Bromides with α-Chlorosulfones (2022) Xi-Sheng Wang and co-workers further expanded the substrate pool to racemic 2-bromo-1,1,1-trifluoroalkanes for enantioconvergent XEC with vinyl electrophiles (Scheme 288).417 Systematic variation of the BOX ligand gem-substituents and increasing the steric profile of the oxazoline substituents led to the development of BOX-3. A variety of styryl, β-alkyl-substituted, and α,β-unsaturated carbonyls work well in this protocol. As with similar reports, (E)-vinyl iodides reacted effectively and with retention of olefin geometry, while the more hindered (Z)-vinyl iodides afforded trace yields. Ni-Catalyzed Enantioselective Cross-Electrophile Coupling of Vinyl Iodides with α-Trifluoromethyl Alkyl Bromides (2022) Zhan Lu, Qun Fang, and co-workers adapted the Reisman conditions for enantioconvergent cross-electrophile coupling of racemic benzylic chlorides with vinyl bromides to work with a photochemical system (an iridium catalyst and Hantzsch ester as terminal reductant) (Scheme 289).418 The authors required a different ligand (s-BuBilm). This method worked well for both aryl bromides and for vinyl bromides. Highlighting a potential challenge with using photochemistry, stilbene derivatives A1 or A2 were needed as triplet-energy-transfer inhibitors to preserve stereoselectivity in the vinyl halide coupling. The authors also demonstrated that the reaction could work with vinyl chlorides in more moderate yields but with high selectivity. Nickel/Photoredox Enantioselective Cross-Electrophile Coupling of Vinyl/Aryl Bromides with Benzyl Chlorides (2022) Concurrently, Jianyou Mao and co-workers found a way to drive enantioconvergent cross-electrophile coupling of benzylic chlorides with vinyl bromides by photoredox cocatalysis (Scheme 290).419 This approach tolerated a variety of substitutions on both aryl rings and retention of (E)-selectivity for the cross-coupling was observed. As with analogous reports, (Z)-vinyl bromides did not react in this reaction. The reaction forms equivalent amounts of HX and a trialkylamine base (Cy2NMe) was added to sequester the acid. Nickel/Photoredox-Catalyzed Enantioselective Cross-Electrophile Coupling of Vinyl Bromides with Benzyl Chlorides (2022) The Nevado group reported an enantioselective Ni-catalyzed cross-electrophile coupling of vinyl bromides with aryl aziridines (Scheme 291).420 This process is driven electrochemically in an undivided cell with a graphite anode, Ni foam cathode, and triethylamine as the terminal reductant. As with other enantioconvergent couplings of benzylic radicals with vinyl bromides, BOX-1 afforded high enantioselectivities in this coupling. Furthermore, the reaction proceeded with high (E)-stereoselectivity, regardless of the E/Z ratio of the starting vinyl bromides. The substrate scope was broad with respect to aryl aziridine electronics and styryl bromide functionality. Alkyl-substituted vinyl bromides also coupled well with increased catalyst and ligand loading. Control experiments support activation of the aryl aziridine proceeding through a benzylic radical. CV and other mechanistic experiments further supported a mechanism where nucleophilic halide ring opening of the aziridine generates a β-halosulfonamide in situ, which is then reduced to the benzylic radical through a variety of pathways. Ni-Catalyzed Enantioselective Electrochemical Cross-Electrophile Coupling of Vinyl Bromides with Aryl Aziridines (2023) Xing-Zhong Shu and co-workers reported an enantiospecific cobalt-catalyzed cross-electrophile coupling of vinyl triflates with chiral allylic alcohols (Scheme 292).421 The alcohols are activated in situ by dimethyl oxalate (DMO), which is proposed to undergo a two-electron oxidative addition with cobalt. This enabled the reaction to proceed with high levels of enantiospecificity and obviated the need for a chiral ligand. The authors noted how the transformation failed to give product under Ni-catalyzed conditions. The MgBr2, BiCl3, and molecular sieves were all critical for complete consumption of the starting materials. Di-, tri- and tetrasubstituted vinyl triflates were all productive coupling partners. Competition experiments revealed that cobalt reacts much more rapidly with the allylic oxalate than the vinyl triflate. Based on additional control experiments, the authors propose a mechanism in which cobalt(0) undergoes an anti-SN2′ oxidative addition to the oxalate to generate a π-allylcobalt(II) complex and inverts the stereocenter. Manganese reduction to allylcobalt(I) followed by oxidative addition to the vinyl triflate affords a cobalt(III) complex. Reductive elimination then yields the cross-coupled chiral product. It is notable that this is the opposite sequence of events compared to the majority of reactions in this section. Cobalt-Catalyzed Enantiospecific Dynamic Kinetic Cross-Electrophile Coupling of Vinyl Triflates with Allylic Alcohols (2021) (a) DMO = dimethyl oxalate. (b) %es = %ee(product)/%ee(starting material). Synthetic Applications of C(sp2)–C(sp3) Vinyl–Alkyl XEC Hodgson and co-workers reported an asymmetric total synthesis of (−)-6,7-dideoxysqualestatin H5 that showcased a stereoretentive cross-electrophile coupling of a vinyl iodide with the tricarboxylate core of the natural product (Scheme 293).422 The stereochemical configuration was achieved through a highly diastereoselective N-alkylation of (R,R)-tartrate acetonide. Presumably due to the thermal instability of the vinyl halide coupling partner, conventional cross-coupling processes failed to deliver the desired product. Cross-electrophile coupling was key for assembling the final natural product. Total Synthesis of (−)-6,7-Dideoxysqualestatin H5 (2017) An improved strategy to (−)-rasfonin from their initial report423 was described by Boeckman and co-workers in 2018 (Scheme 294).424 The focus of this work was to improve scalability of several key steps and enable access to more material for biological testing. Notably, this synthesis features a high yielding cross-electrophile coupling early in the route between a vinyl bromide and an alkyl iodide. This offered a key fragment of the natural product in gram quantities following reduction and functionalization of the Weinreb amide. Total Synthesis of (−)-Rasfonin (2018) Jamison and co-workers reported a strategy for the cross-coupling of vinyl bromides with allyl trifluoroacetates toward the synthesis of skipped polyene fragments for natural product synthesis (Scheme 295).425 This protocol is highly (E)-selective, but alkene isomerization could be limited by employing coupling partners that rapidly react. Importantly, this method tolerates free alcohols, which provides a functional handle for polyene cyclization to prepare natural product cores. The authors showcased a route to prepare a pentaene that utilized two vinyl cross-electrophile couplings in the sequence. Poly epoxidation of the pentaene followed by a ring-opening cascade cyclization afforded the “RST” fragment of maitotoxin. Ni-Catalyzed Cross-Electrophile Coupling for the Synthesis of Skipped Polyenes (2019) In their total synthesis of the meroditerpenoid (−)-isoscopariusin, Pema-Tenzin Puno, Ang Li, and co-workers showcased a vinyl cross-electrophile coupling of an advanced alkyl bromide intermediate with a bromoallylic alcohol (Scheme 296).426 The tricyclic core was prepared from (+)-sclareolide, with a key intermolecular [2 + 2] cycloaddition. The cross-electrophile coupling was notable as it proceeded in good yield on gram scale in the presence of acidic functionality. The synthesis was completed by esterification of the acid, followed by oxidative and protecting group manipulations, which afforded (−)-isoscopariusin in gram quantities as the enantiopure natural product. Total Synthesis of (−)-Isoscopariusin A (2021) In their work on electrochemical cross-electrophile coupling, Baran and co-workers (see section 4.3.2, Scheme 260) showcased the utility and functional group tolerance of their method through the synthesis of 13 terpene-based natural products (Scheme 297).388 Selected examples include efficient, fragment-based couplings to prepare polyene precursors of progesterone and celastrol, as well as geranyl linalool. Many of these couplings were run on gram scale and even at 100-g scale in flow. Furthermore, they demonstrated the total synthesis of all four isomers of the olfactory terpene nerolidol in high stereochemical purity. (S, Z)-nerolidol, and the other three isomers were accessed by varying the olefin geometry of the vinyl iodide fragment and the stereochemistry of the alkyl NHP ester fragment. Applications of Electrochemical Cross-Electrophile Couplings of Vinyl Iodides with N-Hydroxyphthalimide Esters (2022) In their synthesis of the diterpene (+)-aberrarone, Yanxing Jia and co-workers demonstrated a Ni-catalyzed cross-electrophile coupling between a vinyl iodide and an alkyl iodide to join two key fragments (Scheme 298).427 After optimization of the process, they found tpy as ligand to give the best results. The reaction tolerates a free alcohol and a TMS-protected alkyne, which were both handles for further functionalization steps. The tetracyclic ring system was constructed through a Mn(OAc)3 mediated 5-exo/5-exo/5-exo radical cascade cyclization, furnishing the core as a single diastereomer. Following a series of redox manipulations, the synthesis of (+)-aberrarone was completed. Total Synthesis of (+)-Aberrarone (2023) Ketones Overview Ketones are ubiquitous in natural products, bioactive molecules, and synthetic intermediates. Most synthetic procedures to assemble ketones rely on a preformed organometallic reagent, either via coupling to an activated ester (or acyl chloride),428 or addition to an aldehyde, followed by oxidation of the resulting secondary alcohol.429 The use of an organometallic reagent, however, limits reaction functional group tolerance and commercial availability of coupling partners. Replacing organometallic reagents with more commercially available electrophiles expands the scope of this transformation considerably. The development of cross-electrophile approaches to ketones has been the subject of recent development, with 85% of reports in this section published in the past 10 years. This area has been previously reviewed in 2019.430 This section will cover the coupling of alkyl electrophiles with acyl electrophiles. section 3.5 covers ketone synthesis by coupling acyl electrophiles with aryl and vinyl electrophiles. Ligands used in this section parallel common ligands used in analogous Aryl–Alkyl bond formations (Figure 30), with 96% of all ligands being nitrogen heterocycles (Figure 31). The phosphine ligands used in this section are either 1) bound to a metal that is not nickel or 2) used in concert with a nitrogen ligand, further highlighting the indispensable nature of nitrogen heterocycle ligands in Ni-catalyzed XEC. Ligands used in acyl–alkyl XEC reactions. *Denotes chiral center. Distribution of ligands used in acyl–alkyl XEC reactions. Acid Halides as Electrophiles XEC with Alkyl Halides In 2012, our group reported the coupling of alkyl acid chlorides or 2-pyridyl thioesters with alkyl iodides or benzyl chlorides (Scheme 299).431 We proposed a dialkylnickel(II) intermediate, formed from disproportionation of an alkylnickel(II) halide complex, which then interacts with the carboxylic acid derivative to furnish the desired ketone product. Subsequent mechanistic studies suggest an acylnickel(II) intermediate coupling to an alkyl radical is more likely. In a subsequent report, these conditions were scaled up to a 98 mmol scale synthesis of ethyl 4-oxododecanoate in a 500 mL jacket reactor with minimal change in yield.432 XEC of Alkyl Carboxylic Acid Derivatives with Alkyl Iodides or Benzyl Chlorides (2012) (a) With Zn (3 equiv) instead of Mn. (b) Average of two runs. Shortly after, Hegui Gong and Qinghua Ren reported the XEC of alkyl halides with acid chlorides (Scheme 300).433 The method was compatible with primary and secondary alkyl halides. On the acyl coupling partner, aroyl chlorides were the most successful, but one example of a benzylic acyl chloride and pivalyl chloride coupling were shown. The authors illustrated the synthetic utility of this method by completing a 30-fold scale up of these reaction conditions with improved yields.434 The presence of radical intermediates was strongly suggested by rearrangement of an allylic ether substrate. The authors conducted a competition experiment that suggested alkylzinc intermediates were not competent in the primary product-forming pathway. Ni-Catalyzed XEC of Alkyl Halides with Acid Chlorides (2012) (a) With Ni(COD)2 (10 mol%). (b) With dtbbpy (10 mol%). In 2016, Hegui Gong and co-workers reported the coupling of alkyl halides with isopropyl chloroformate to form alkyl esters under XEC conditions (Scheme 301).435 Notably, this reaction displayed a broad scope, including primary and secondary alkyl iodides, and useful levels of diastereoselectivity with cyclic alkyl halides. Functional group tolerance included protected alcohols and amines. This method has been further extended to the three component carbonylative couplings as shown in section 4.4.6.1. XEC of Alkyl Halides with Isopropyl Chloroformates (2016) (a) With bpy as ligand, (b) With i-PrO2CCl (3 equiv), (c) With i-PrO2CCl (4 equiv). XEC with N-Alkylpyridinium Salts The Rasappan lab reported the coupling of alkyl carboxylic acids (either via isolated acid chlorides or in situ generated acid anhydrides) with amine-derived N-alkylpyridinium salts to form primarily dialkyl ketones (Scheme 302).436 Employing starting materials typically utilized to synthesize amide bonds offered an attractive expansion of potential coupling partners for ketone formation. Among the many tolerated functional groups were -Boc, -MOM, and other acetals. For cases where the acid chloride was difficult to purify, an in situ protocol using oxalyl chloride or thionyl chloride was demonstrated, although lower yields were observed for the coupled product. Acylation of Pyridinium Salts by Activated Carboxylic Acids (2020) (a) In situ activation conditions = acid (1 equiv), Boc2O (1.2 equiv), MgCl2 (0.33 equiv) in MeCN, followed by coupling. (b) Reduced to the corresponding alcohol with NaBH4 (3 equiv). In collaboration with the Watson group, we reported a cross-coupling strategy that utilized either preformed or in situ generated derivatives of amines (via N-alkylpyridinium salts) and carboxylic acids (activated as alkyl acid fluorides or 2-pyridyl esters) to form dialkyl ketones (Scheme 303).437 In situ generation of the activated carboxylic acid was explored, and both acid fluorides and 2-pyridyl esters were stable enough for purification. Primary, secondary, and tertiary acid derivatives were tolerated with slight modifications to the reaction conditions, and primary and secondary N-alkylpyridinium salts are well tolerated. Drug fragments were successfully coupled, including amlodipine, cetirizine, and an atorvastatin intermediate. XEC of Alkyl Acid Fluorides or 2-Pyridyl Esters with N-Alkyl Pyridinium Salts (2020) (a) G = F, L = ttbtpy. (b) G = OPy, L = Bphen, with NiBr2(dme) as precatalyst. (c) Acid fluoride generated in situ. Other Coupling Partners In 2014, Kunhua Lin and Hegui Gong identified methyl tosylate (MeOTs) as a competent methyl synthon for methyl ketone synthesis from acid chlorides (Scheme 304).438 The authors propose that under the optimized conditions, low concentrations of methyl iodide are maintained over the course of the reaction (generated from MeOTs and TBAI), which minimizes methyl dimerization and better matches the rates of activation between the two coupling partners. In the same report, the authors also developed distinct conditions for the XEC of alkyl halides with MeOTs (see section 6.3.3, Scheme 364). Ni-Catalyzed Methylation of Acid Chlorides with Methyl Tosylate (2014) In 2018, Chuan Wang and co-workers reported a reductive electrophilic ring opening of cyclic ketone oxime esters with aryl acid chlorides that forms ω-cyano ketones (Scheme 305).439 The reaction occurs at unusually low temperatures for XEC (−55 °C) and is an early example of C–C bond scission in XEC. The authors propose initial activation of the cyclic oxime ester, resulting in a caged intermediate complex consisting of an iminyl radical, which ring opens to give a C-centered radical, which then recombines with the Ni(II) complex. Ni-Catalyzed Ring Opening of Cycloketone Oxime Esters and Coupling with Aroyl Chlorides (2018) Electrochemical and Photochemical Approaches In 1989, Nédélec, Périchon and co-workers reported an electrochemical coupling of acid chlorides with benzyl, allyl, and aryl halides in an undivided cell using either a Zn or Mg rod as the sacrificial anode and a nickel bipyridine catalyst.144 The authors found that Mg rod required an excess of the acid chloride for good yields, whereas the Zn rod was successful with a 1:1 ratio of starting materials (Scheme 306). The authors observed a difference in the rates of addition to the nickel center, with oxidative addition of the acid chloride being faster. Electrochemical XEC of Acid Chlorides with Organohalides (1989) Acid Esters as Electrophiles XEC with Alkyl Halides In 1981, the Mukaiyama group reported the seminal synthesis of unsymmetrical ketones via nickel catalysis, coupling substituted 2-pyridyl esters with primary alkyl iodides (Scheme 307).440 A variety of 2-pyridyl ester derivatives were tested, however, the authors propose that the 2-methoxyethyl substituent enabled the 2-pyridyl ester to coordinate more efficiently to the nickel center. The authors reported success with a variety of esters, including aryl, vinyl, and alkyl substrates. This work represents the first example of ketone formation through XEC and showed that these conditions advantageously avoid preformation of carbon nucleophiles. XEC of 2-(6-(2-methoxyethyl)pyridyl) carboxylates with Alkyl Iodides (1981) Chuan Wang and co-workers reported the cross-electrophile coupling of ortho-substituted benzoic acid phenyl esters with primary and secondary alkyl bromides (Scheme 308).441 Phenyl esters are rarely utilized as electrophiles in cross-electrophile coupling reactions. The authors provide evidence that the 2-hydroxyl- and 2-sulfonamide functional groups on the benzoic acid direct and accelerate the oxidative addition. These directing groups are also useful functional groups for further derivatization. The authors were also able to scale up the coupling with an ortho-hydroxy-substituted benzoic acid phenyl ester 25-fold (from 0.2 to 5 mmol) with no loss in yield. Ni-Catalyzed XEC of Aryl Phenolic Esters with Alkyl Bromides (2020) PMB = para-methoxybenzyl. XEC with Alkyl NHP Esters In collaboration with the Gellman group, our group reported the cross-electrophile coupling of 2-pyridylthioesters (acyl donor) with alkyl N-hydroxyphthalimide (NHP) esters (radical donor) (Scheme 309).442 It was found that an electron-poor 4,4′-CO2Mebpy outperformed the more commonly used electron-rich ligands. Furthermore, the consumption of the NHP ester was tuned by the inclusion of zinc salts in the reaction, and by using a mixed solvent system of 1:1 THF and DMA. In THF alone, unreacted NHP ester remained at the end of the reaction, but in DMA only, the NHP ester was consumed rapidly and resulted in lower product formation (38% yield). As an application of this method, we could selectively functionalize a 20-mer peptide fragment analogue of Exendin(9–39) (a GLP-1 receptor agonist) on solid support. l-Glutamic acid esters were incorporated into the peptide chain, and our protocol was able to selectively form ketone products at these sites. Ni-Catalyzed XEC of N-hydroxyphthalimide Esters with 2-Pyridyl Thioesters (2019) (a) With NiBr2(dme) (10 mol%) and 4,4′-CO2Mebpy (10 mol%). (b) With tpy (2 mol%) as ligand. (c) With NHP ester (1.5 equiv). XEC with Alkyl Mesylates Zhong-Xia Wang reported the coupling of aryl 2-pyridyl esters with alkyl mesylates (via in situ generation of the alkyl halide) (Scheme 310).443 Electron-rich aryl 2-pyridyl esters provided the highest yields in this report (up to 97% isolated yield), and in contrast, electron-poor aryl 2-pyridyl esters resulted in lower yields often forming unidentified side products. When coupling secondary alcohol derivatives, the authors found that extending the reaction time (from 14 to 36 h) and changing the ligand (from phen to dtbbpy) was required to increase product yield. Due to the use of NiI2 and TBAB in their reaction conditions, the authors studied the effects that iodide and bromide salts had on the reaction. When replacing the alkyl mesylate with the analogous alkyl bromide or alkyl iodide, product was able to form under the optimized conditions (60% when X = Br, and 41% when X = I), indicating that the in situ generation and consumption of either alkyl halide can result in product formation. Ni-Catalyzed XEC of Aryl 2-Pyridyl Esters with Alkyl Mesylates via in Situ Halogenation (2023) Electrochemical and Photochemical Approaches A cross-electrophile coupling of 2-pyridyl esters with NHP esters to form ketones was reported by Xiaotian Qi, Weiming Yuan and co-workers through a nickel/photoredox strategy (Scheme 311).444 The substrate scope is notably broad for both coupling partners, encompassing primary, secondary and tertiary NHP esters with both aryl- and alkyl-substituted 2-pyridyl esters. A lower yielding example with a cinnamic acid-derived 2-pyridyl ester was also reported, but the authors note this substrate class is particularly susceptible to Giese addition side-products. Stochiometric studies with an acylnickel(II) derived from the 2-pyridyl ester afforded trace product, suggesting that under these conditions, an acylnickel(II) may not be a competent intermediate. DFT calculations support these observations, and suggest a Ni(0)/Ni(I)/Ni(III) pathway could be operative. Photoredox-Assisted XEC of 2-Pyridyl Esters with Alkyl NHP Esters (2022) Acyl Imide Derivatives as Electrophiles N-Acyl imides and N-acylsulfonamides have increased stability compared to acyl chlorides, but still are activated carboxylic acids capable of oxidative addition with transition metals.445 Extensive studies have been reported on their use in cross-coupling with carbon nucleophiles446−448 and, more recently, carbon electrophiles. XEC with Alkyl Halides Chao Li and co-workers reported on the coupling of N-acylimidazoles as acyl coupling partners with alkyl and aryl bromides to form unsymmetrical ketones (Scheme 312).449 Interestingly, when 2-cyclopropyl-1-(1H-imidazol-1-yl)ethan-1-one was subjected to the optimized reaction conditions with alkyl and aryl bromide coupling partners, the cyclopropane ring-opened product was formed, indicating that primary and secondary N-acyl imidazoles engage in a carbon monoxide extrusion-recombination pathway that proceeds via a radical intermediate. This is distinct from other acyl donors in this review, which generally engage in a two-electron process. In contrast, when a tertiary N-acylimidazole with an α-chiral stereocenter was subjected to reaction conditions, the enantiopurity was preserved, supporting a concerted oxidative addition pathway for these more hindered acyl donors. Conditions for coupling N-acylimidazoles with aryl bromides were also developed in this study. XEC of N-Acylimidazoles with Alkyl Bromides (2020) 3,3-Dimethylallyl bromide was used. The Morrill and Browne laboratories reported the XEC of N-acyl glutarimides with alkyl bromides under ball-milling conditions (Scheme 313).450 Mechanical activation of metal powder reductants is well-known, and as such, is a good match for ball milling.451−453 Notably, these reactions are performed under nearly neat conditions, with only 3 equiv of DMA used to assist grinding, and with no precautions to exclude air. The authors hypothesize that the addition of NaCl could assist with grinding the Mn and/or with catalyst speciation (various salts are common additives in XEC). The N-acylglutarimides performed better than other examined acyl donors and were synthesized from the corresponding acid chloride. Although direct insertion of manganese into the alkyl bromide was shown to be possible under ball-milling conditions, the mechanism appears to be more nuanced, as cyclopropylmethyl bromides only afforded the rearranged product from radical ring-opening. Ball-Milling Enabled XEC of N-Acyl Glutarimides with Alkyl Bromides (2022) Other Coupling Partners The Matsuo lab reported the coupling of N-alkyl pyridinium salts with N-acylsuccinimides (Scheme 314).454 The coupling worked best for electron-rich and -neutral aryl N-acylsuccinamides, however, electron-poor aryls failed to couple effectively. Primary and secondary N-alkyl pyridiniums were both compatible under these conditions. In agreement with previous reports, the authors propose that radical generation from N-alkyl pyridinium salts may occur via reduction by Mn, separating the rate of activation from the nickel catalyst.282 Ni-Catalyzed Deaminative XEC of Alkyl Pyridinium Salts with N-Acylsuccinimides (2020) Electrochemical and Photochemical Approaches The Amgoune lab reported the cross-electrophile coupling of N-acylsuccinimides with unactivated alkyl bromides utilizing silyl radical activation under photoredox conditions (Scheme 315).455 These conditions utilize tris(trimethylsilyl)silane as the terminal reductant and halide atom transfer (XAT) agent. An equivalent of base is required to quench the HBr generated as coproduct. The iridium dye serves to both activate the supersilane reagent and reduce the nickel catalyst. Silyl Radical Mediated XEC of N-Acyl Imides with Unactivated Alkyl-Bromides Under Metallaphotoredox Conditions (2020) With N-acyl glutarimide as the acyl donor. The Opatz lab developed the nickel/photochemical XEC of N-aroylsaccharins as the acyl donor and NHP esters as the radical donor (Scheme 316).456 The electron donor–acceptor complex of the Hantzsch ester with the NHP ester is directly excited by 390 nm wavelength light to generate the radical. A notable advantage of this approach was a broad acyl scope–both electron-neutral to electron-rich benzoic acids as well as an α,β-unsaturated acid and aliphatic carboxylic acids. Electron-poor benzoic acids were unsuitable, as were some more nucleophilic radicals (tertiary, α-heteroatom secondary). It is notable that N-acylsaccharin was the only acyl donor that afforded cross-product while other more common activated amides (as well as the acyl chloride) were incompatible under these conditions. Nickel/Photochemical XEC of N-Acylsaccharins with NHP Esters (2021) Amgoune, Vantourout, and co-workers synthesized dialkyl ketones from the XEC reaction of N-acylsuccinimides with alkyl bromides or benzyl chlorides (Scheme 317).457 The reactions were driven electrochemically utilizing an undivided cell with a sacrificial zinc anode. The authors synthesized and fully characterized a putative acylnickel(II) intermediate, noting that the succinimidate (Su) group conferred excellent stability (1 week under N2 in solution) in comparison to the reported poor stability of the corresponding halide complexes. CV studies show that (L)NiI(OAc) can react with both the alkyl bromide (to form a radical) and with the N-acyl imide (to form a transient (L)NiIII(Su)(acyl)(OAc) that is reduced to nickel(II)). CV studies on (L)NiII(Su)(acyl) show that this species can be reduced to (L)NiI(Su)(acyl) and this species might be a source of side products as well as alkyl radical. The authors propose that (L)NiI(OAc) is operative on cycle for the activation of both electrophiles, but conclude that (L)NiI(Su)(acyl) is not required for product formation. Electrochemical Cross-Electrophile Coupling of N-Acyl Imides with Alkyl Halides (2022) Mixed Anhydrides as Electrophiles XEC with Alkyl Halides Early studies by Hegui Gong, Kunhua Lin and co-workers reported the Ni-catalyzed XEC of in situ generated mixed anhydrides (from the corresponding aryl carboxylic acid and di-tert-butyl dicarbonate (Boc2O)) with alkyl iodides to efficiently form unsymmetrical ketones (Scheme 318).458 The authors found that MgCl2 was a key additive, dramatically improving yields. Primary and secondary alkyl halides were well tolerated, with cyclic secondary alkyl halides giving higher yields than acyclic ones. This work also contained studies with preformed symmetric anhydrides with alkyl iodides and bromides. This report demonstrated that in situ activation of carboxylic acids as mixed anhydrides for ketone synthesis can be an efficient alternative to other acyl donors that require preformation. XEC of Alkyl Halides with Pre-Formed or In Situ Generated Acid Anhydrides to Form Unsymmetrical Ketones (2012) (a) L= 4,4′-Mebpy, (b) L = Bphen. Hegui Gong and co-workers then reported the Ni-catalyzed cross-electrophile coupling of alkyl carboxylic acid derivatives with unactivated alkyl and glycosyl halides (Scheme 319).459 The carboxylic acids are activated in situ as the mixed anhydride with Boc2O. Three distinct methods were developed: couplings of tertiary alkyl bromides (Method A), couplings of primary/secondary alkyl iodides (Method B) and couplings of primary/secondary bromides (Method C). In some cases, substoichiometric amounts of TBAI were required to activate primary alkyl bromides. The authors propose a radical chain mechanism, in which MgCl2 accelerates reduction of the nickel(II) complexes by zinc. In addition, the authors couple glycosyl bromides with either propionic acid or the analogous anhydride, resulting in C-acyl glycosides with high α-selectivity. Ni-Catalyzed XEC of In Situ-Formed Mixed Anhydrides with Alkyl Halides (2014) (a) Method A: X = Br, Ni(acac)2 (10 mol%), bpy (12 mol%), MgCl2 (1 equiv), i-Pr2NEt (0.85 equiv), Boc2O (2 equiv), Zn (3 equiv), DMSO/DME, 30 °C. (b) Method B: X = I, Ni(acac)2 (10 mol%), phen (12 mol%), Boc2O (2 equiv), Zn (3 equiv), MgCl2 (1.5 equiv), MeCN/THF, 25 °C. (c) Method C: X = Br, Ni(acac)2 (10 mol%), dtbbpy (12 mol%), Boc2O (2 equiv), Zn (3 equiv), MgCl2 (1.5 equiv), TBAI (0.5 equiv), DMF/THF, 30 °C. Hegui Gong and co-workers also utilized either preformed or in situ generated aryl acid anhydrides to couple with secondary alkyl bromides (Scheme 320).460 From optimization, the authors found that a mixed solvent system of MeCN/DMF was more efficient than any single solvent system, and the primary side product was hydrodehalogenation of the alkyl bromide. This also is the first synthesis of aroyl C-glycosides, in particular acyl glucosides, galactosides, and mannosides, by directly coupling glycosyl bromides with acid derivatives in an α-selective method. These methods enabled the efficient coupling of aryl acids and acid anhydrides to alkyl halides, which was previously difficult, likely due to mismatched rates of reactivity. Coupling of Aryl Carboxylic Acid Derivatives with Secondary Alkyl Bromides (2015) (a) Method A: Y = H, Ni(acac)2 (5 mol%), dtbbpy (7 mol%), Zn (3 equiv), MgCl2 (2.5 equiv), Boc2O (3 equiv), MeCN/DMF, 25 °C. (b) Method B: Y = C(O)Ar, Ni(ClO4)2•6H2O (10 mol%), bpy (12 mol%), Zn (3 equiv), TBAI (20 mol%), MeCN/DMF, 25 °C. (c) DME/DMF as solvent. (d) Ni(acac)2 (10 mol%) and dtbbpy (15 mol%) were used. (e) With alkyl iodide (2 equiv). You Wang, Shaolin Zhu, and co-workers reported the migratory acylation of alkyl bromides with in situ activated alkyl carboxylic acids (Scheme 321).461 The authors propose that success of this reaction may be contingent on in situ formation of a nickel hydride species from β-hydride elimination of an alkylnickel species; this resulting species could then undergo chain walking before selective acyl cross-coupling. The reaction has excellent regioselectivity and allows the coupling of both terminal and internal alkyl bromides. This reaction is also highly regioconvergent, as the authors converted an isomeric mixture of three olefins to the benzylic acylation product as a single regioisomer in good yield (68% yield, >99:1 rr). Through an acylation vs arylation competition experiment, the authors obtained an approximate 5:1 ratio of acylated to arylated product, indicating the coupling of the carboxylic acid was faster than that of an aryl bromide. Ni-Catalyzed Migratory Acylation of Alkyl Bromides with In Situ Activated Alkyl Carboxylic Acids (2019) (a) From the terminal (primary) alkyl bromide. (b) From the internal (secondary) alkyl bromide. Tian-Sheng Mei, Bin Cheng, and co-workers reported an electrochemically mediated migratory cross-electrophile coupling of alkyl bromides with in situ activated alkyl carboxylic acids (Scheme 322).462 Based on CV studies, the authors propose that the carboxylic acid undergoes oxidative addition to the nickel(0) center, followed by cathodic reduction to generate an acylnickel(I) species. After capturing the radical generated from the alkyl bromide, the resultant complex undergoes β-hydride elimination to an η2-type intermediate, followed by reinsertion, to generate a more thermodynamically stable benzylic nickel(II) intermediate. This complex then undergoes reductive elimination to generate the desired product in high regioselectivity. Migratory Cross-Electrophile Coupling of In Situ Generated Alkyl Carboxylic Acid Anhydrides with Alkyl Bromides under Electrochemical Conditions (2021) XEC with NHP Esters The Baran lab, in collaboration with Pfizer, Bristol-Myers Squibb, and Enamine, reported the decarboxylative cross-electrophile coupling of NHP esters with in situ generated mixed anhydrides (Scheme 323).463 The authors propose a radical chain mechanism, wherein the mixed anhydride coupling partner undergoes oxidative addition to the nickel(0) center, followed by MgCl2 mediated anionic ligand exchange, then radical capture from the alkyl NHP ester. Through mechanistic studies, the authors propose the rate of heterogeneous electron transfer as being partially rate-determining, with positive rate dependencies on MgCl2, LiBr, and Zn. The scope is broad, allowing for coupling of primary, secondary, and tertiary alkyl substrates of both coupling partners. Ni-Catalyzed Decarboxylative XEC of NHP Esters with Alkyl Carboxylic Acids (2019) The Molander lab utilized photoactivation of an electron donor–acceptor (EDA) complex to synthesize nonanomeric C-acyl glycosides from NHP esters with in situ activated pyranosyl- and furanosyl acids (Scheme 324).464 The EDA complex is proposed to be formed via π-stacking interactions between the phthalimide fragment of the NHP ester and the Hantzsch ester photoreductant, allowing for successful coupling without an external photo- or metal reductant. Formation of Non-Anomeric C-Acyl Glycosides via Photoactivation of an Electron Donor–Acceptor Complex (2022) DMDC = dimethyl dicarbonate Other Coupling Partners Hongyu Wang and co-workers reported the methylation of in situ generated alkyl acid anhydrides using MeOTs through XEC (Scheme 325).465 The authors propose that the MeOTs undergoes anion exchange to either form low concentrations of MeI or MeCl in situ, which, in turn, participates in the catalytic reaction. This adjusts the rate of reactivity of the methyl coupling partner to better match the rate of oxidative addition of the mixed anhydride, improving the cross-selectivity. The authors found that Boc-protected amino acids are a limitation of these reaction conditions, and the authors propose that the N-alkylated compounds may complex with the catalyst, resulting in an off-cycle species. Ni-Catalyzed Methylation of In Situ Activated Alkyl Carboxylic Acids (2017) Electrochemical and Photochemical Methods Wujiong Xia, Chao Yang, and co-workers reported the electrochemical coupling of in situ activated aryl carboxylic acids with a variety of alkyl halides and NHP esters (Scheme 326).466 From mechanistic experiments, the authors propose cathodic reduction of a nickel(II) species to the low-valent nickel(0) species, which can then undergo oxidative addition of the acyl coupling partner. The utilization of both organohalides and NHP esters further expands the compatibility and applicability of this protocol, given differing commercial availability of desired coupling partners. In contrast with previous reports,462 no chain-walking product was observed under these conditions. Electrochemical XEC of In Situ Activated Carboxylic Acids with Alkyl Electrophiles (2022) (a) With alkyl iodide. (b) With alkyl bromide. (c) With NHP ester. XEC with Exogenous CO Source Formation of ketones with gaseous CO may at first seem an obvious transformation, but there are safety concerns in translation of these reactions to scale up, particularly high pressure, toxicity, flammability, as well as a concerns with reliable CO incorporation. Recent publications have explored a variety of exogenous CO sources as ways of safely loading a carbonyl source into the reaction. These alternate pathways to CO incorporation have allowed for an even larger variety of coupling partners to be utilized in the formation of ketones. Chloroformates as Exogenous CO Source Current mechanistic understanding of carbonylative couplings using chloroformates is limited. However, current DFT calculations have coalesced on chloroformates undergoing a 2-electron oxidative addition to the nickel center, followed by CO migration to form a nickel carbonyl species. What remains less understood is the comparative rate of activation of coupling partners, particularly whether aryl electrophiles or chloroformates undergo oxidative addition first. Ming Joo Koh, Yu Lan, Shi-Jun Li, and Quanquan Wang reported the multicomponent coupling of glycosyl halides and organoiodides with isobutyl chloroformate as an exogeneous CO source (Scheme 327).467 The resulting C-acyl glycosides are isolated in high chemo- and diastereoselectivity. Conditions A are utilized when coupling aryl iodides and Conditions B are used when coupling alkyl iodides, providing orthogonal reactivity for coupling glycosyl halides with a vast array of coupling partners. Using DFT calculations, the authors propose that the initial oxidative addition of isobutyl chloroformate to a nickel(0) species is favored to occur first. After sequential reduction steps, organoiodides can undergo oxidative addition to the reactive nickel(0) carbonyl species, followed by 1,1-migration to generate an acylnickel(II) species. Carbonylative XEC of Glycosyl Halides with Organoiodides and Isobutyl Chloroformate as a CO Source (2022) (a) Conditions A: glycosyl halide (2.0 equiv), isobutyl chloroformate (2.0 equiv), aryl iodide (1.0 equiv), NiI2 (10 mol%), dtbbpy (12 mol%), Mn (3.0 equiv), TMSCl (0.5 equiv), DMA/THF, 40 °C. (b) Conditions B: glycosyl halide (1.0 equiv), isobutyl chloroformate (2.0 equiv), alkyl iodide (3.0 equiv), NiBr2(diglyme) (10 mol%), BOX-8 (12 mol%), Mn (3.0 equiv), TMSCl (0.5 equiv), DMA/THF, 40 °C. Chen Zhu, Magnus Rueping and co-workers utilized ethyl chloroformate as a readily available source of CO in the cross-electrophile coupling of aryl iodides with alkyl bromides (Scheme 328).468 DFT calculations and mechanistic studies suggest that the reaction proceeds via a sequence of oxidative additions, starting with aryl halide, then ethyl chloroformate, followed by alkyl bromide. The reaction showed high compatibility for a variety of primary alkyl bromides, and slightly modified conditions resulted in successful couplings with secondary alkyl iodides. Electron-rich aryl iodides were coupled more efficiently than their electron-deficient counterparts. Ni-Catalyzed XEC of Aryl Iodides with Alkyl Bromides with Ethyl Chloroformate as CO Source (2022) (a) With alkyl chloride. (b) With (R)-4-(tert-butyl)-2-(pyrimidin-2-yl)-4,5-dihydrooxazole as ligand. (c) With alkyl iodide. (d) With Ni(COD)2 (10 mol%). Xile Hu reported the carbonylative XEC with a variety of alkyl halides using ethyl chloroformate as a CO source to form both symmetric and unsymmetric ketones (Scheme 329).469 The authors propose an oxidative addition of ethyl chloroformate, radical capture of the first alkyl coupling partner, then 1,1-migration to form an acylnickel species. This is followed by a second radical capture and then reductive elimination to give the desired ketone product. Interestingly, carbonylative cross-coupling was favored over carbonylative homocoupling of either alkyl substrate, even when the two alkyl substrates shared a halide class. Carbonylative XEC of Alkyl Halides with Ethyl Chloroformate as a CO Source (2019) Metal Carbonyls as Exogenous CO Source Troupel and co-workers reported an electrochemical, Ni-catalyzed carbonylative synthesis of unsymmetrical ketones by the XEC aryl halides with alkyl or benzyl halides.470 By utilizing iron pentacarbonyl as the CO source (Scheme 330), the authors avoided formation of a saturated (bpy)Ni(CO)2 complex, which was observed when an excess of CO(g) was introduced into the reaction mixture. Conversely, when the concentration of CO(g) was low, the formation of alkyl homodimer was competitive with ketone formation. Functional group tolerance was notable for this early study, which included free phenol and aniline functionality, highlighting the potential of this approach to prepare ketones. Carbonylative Electrochemical XEC of Aryl Halides with Alkyl or Benzyl Halides with Iron Pentacarbonyl as a CO Source (2001) Our group reported the Ni-catalyzed cross-electrophile coupling of aryl and alkyl bromides under carbonylative conditions utilizing iron pentacarbonyl as an exogenous CO source (Scheme 331).471 The development of catalytic conditions was guided by stoichiometric studies of acylnickel complexes with alkyl and aryl halides. From these studies, we found that the addition of zinc to these stoichiometric reactions with alkyl halides did not improve cross-selectivity. This suggested direct reduction of an acylnickel(II) to the analogous nickel(I) complex was not a necessary step in the ketone synthesis. For the catalytic conditions, increasing the amount of alkyl bromide was needed to overcome aroylnickel(II) disproportionation to diaryl ketone side-products. Tuning the loading of iron pentacarbonyl to control the concentration of CO in solution was also important to increase the yield of carbonylated products (too much iron pentacarbonyl shuts down reactivity, however). Carbonylative XEC of Aryl and Alkyl Bromides with Fe(CO)5 as an Exogenous CO Source (2014) Stereocontrolled XEC of Acyl–X with Alkyl–X Reisman and co-workers reported the first example of asymmetric XEC to prepare α,α-chiral ketones through the coupling of acyl chlorides with secondary benzyl chlorides (Scheme 332).472 The addition of 2,6-dimethylbenzoic acid (DMBA) was found to decrease the amounts of homocoupled products. BOX-ligands afforded the highest enantioselectivity over other classes of chiral ligands. Benzyl chlorides were best matched in this system, as when the coupling partner was exchanged for the analogous bromide, an approximate 10-fold increase in benzyl radical dimer was observed. Ni-Catalyzed Enantioconvergent XEC of Acid Chlorides with Benzylic Chlorides (2013) (a) With BOX-4 (22 mol%). (b) With DMBA (1.25 equiv). DMBA = 2,6-dimethylbenzoic acid. Chun Zhang, Genping Huang, and co-workers reported the enantioconvergent XEC of acyl chlorides with racemic α-trifluoromethyl bromides.473 In this work, the trifluoromethyl group was crucial to the success of this transformation, as changing of this group to others either resulted in no observed product, or a racemic product mixture (Scheme 333). The authors propose that cobalt phthalocyanine (CoPc) promotes the formation of a radical, in agreement with previous reports.174 Enantioconvergent XEC of Acyl Chlorides with Racemic α-Trifluoromethyl Bromides (2022) Concurrently, Liang-An Chen and co-workers also developed a Ni-catalyzed XEC of acid chlorides with α-CF3 alkyl bromides to generate α-trifluoromethylated ketones (Scheme 334).474 The authors found that careful selection of an achiral monodentate phosphine coligand afforded improved enantioselectivity and coupling efficiency. Time courses showed that the phosphine ligand rapidly increased the rate of the reaction and improved product formation. The system is chemoselective for α-CF3 secondary alkyl bromides over primary alkyl bromides. Ni-Catalyzed Enantioselective XEC of Acid Chlorides with α-Trifluoromethylated Alkyl Bromides (2022) With BOX-6 (11 mol%). Liang-An Chen, Qiaorong Han, and co-workers reported a Ni-catalyzed enantioselective XEC of acid chlorides with α-bromobenzoates to synthesize chiral protected α-hydroxy ketones. (Scheme 335).475 The authors observed enhanced enantioselectivities with increased steric hindrance at the bis(oxazoline) (BOX). The scope is broad, encompassing both aroyl and alkyl-substituted acyl chlorides. The reaction is also chemoselective for α-bromobenzoates over primary alkyl bromides and iodides. As an application of this chemistry, a series of bioactive α-hydroxy ketones were efficiently prepared through this reaction. Stochiometric experiments with chiral acyl(II)nickel could form product with added zinc. Taken together with other mechanistic data, the authors proposed a radical chain mechanism, contingent upon the formation of a prochiral ketyl radical, which is captured by a chiral acylnickel(II) species. Ni-Catalyzed XEC of α-Hydroxy Ketones from Acid Chlorides and α-Bromobenzoates (2022) Via in situ generation of α-oxy bromide from corresponding aldehyde. Synthetic Applications of C(sp2)–C(sp3) Acyl–Alkyl XEC Kishi and co-workers have studied cross-electrophile coupling methods extensively in their work on the total syntheses of classes of halichondrins. Their first publication implementing these reactions saw the design of a one-pot, iron/copper-mediated coupling of alkyl iodides with alkyl acid chlorides or alkyl 2-pyridyl thioesters (Scheme 336).476 By utilizing iron- and copper-based catalysts instead of nickel- or palladium-based catalysts, the reaction was selective for coupling alkyl iodides over vinyl iodides.477 Iron/Copper-Mediated Cross-Coupling of Alkyl Iodides and Alkyl Carboxylic Acid Derivatives (2017) (a) Condition A: X = Cl, Y = 3.0, Z = 1.0, Fe(TMHD)3 (10 mol%), CuCl2 (1 equiv). (b) Condition B: X = Cl, Y = 1.0, Z = 1.2, FeBr2(dppbz) (5 mol%), CuCl2 (1 equiv). (c) Condition C: X = 2-pyridyl thioester, Y = 1.2, Z = 1.0, FeBr2(dppbz) (5 mol%), CuI (1 equiv), Cp2ZrCl2 (1 equiv). (d) With FeBr2(SciOPP) (5 mol%). Shortly after, Kishi’s lab developed a zirconium/nickel-mediated synthesis of unsymmetric alkyl ketones (Scheme 337).478 In the presence of zinc reductant, Cp2ZrCl2 accelerated coupling and suppressed side products from an SN2-type displacement. The authors propose that Cp2ZrCl2 assists with 1-electron activation of the alkyl iodide coupling partner, to generate an alkylzirconocene(III) complex. This complex then undergoes a transmetalation with an acylnickel(II) species to furnish the desired (alkyl)acylnickel(III) complex. In contrast to their previous Fe/Cu mediated ketone synthesis, these conditions were tolerant of coupling partners bearing an -OR functional group in the α-position. Their scope included products isolated with perfect diastereoselectivity, providing support as a viable transformation for use in the total syntheses of the class of halichondrins.479 Nickel/Zirconium Mediated Synthesis of Dialkyl Ketones from 2-Pyridyl Thioesters and Alkyl Iodides (2017) Submitted in tandem with this work, the Kishi’s lab also reported the syntheses of nor-, homo-, and halichondrins A, B, and C.480 The coupling shown in Scheme 338 was selected as the model reaction, with 2,6-di-tert-butyl-4-methylpyridine (DTBMP) added to avoid partial deprotection of TES groups during the reaction. This coupling proceeded in high yield, providing motivation to proceed toward the synthesis of desired halichondrins. The desired halichondrin ketone precursors were isolated in high yields (average 85% across 9 examples). Example Ketone Coupling using Alkyl iodide derived from Halichondrins B with Alkyl 2-Pyridyl Thioester (2017) DTBMP = 2,6-di-tert-butyl-4-methylpyridine Further studies by the Kishi lab into the nickel/zirconium-mediated coupling of alkyl 2-pyridyl thioesters and alkyl iodides found that a mixed catalyst system composed of nickel(I) and nickel(II) complexes resulted in improved yields with a 1:1 ratio of coupling partners and lower catalyst loading (Scheme 339).481 The authors use modified conditions in a halichondrin synthesis, resulting in similar yields of ketone precursor to those reported in previous publications, but with a 1:1 ratio of coupling partners. Cross-Electrophile Coupling of Alkyl 2-Pyridyl Thioesters with Alkyl Iodides in a Two-Catalyst System (2019) There have been several reports of the total synthesis of (−)-Berkelic Acid to date, characterized by the formation of a ketyl aldehyde and the Kiyooka aldol reaction (13 steps LLS, 2% overall yield),482 Pd-catalyzed ortho-alkylation (11 steps LLS, 13.9% overall yield),483 or a protected (10 steps LLS, 11–27% overall yield)484 or protecting group-free silver-catalyzed cascade reaction (7 steps LLS, 12.5% overall yield).485,486 Shuanglin Qu, Qianghui Zhou, and co-workers reported the concise synthesis of (−)-berkelic acid in eight linear steps.487 A novel transformation of this total synthesis is the late-stage Ni-catalyzed cross-electrophile coupling to form the primary/tertiary unsymmetric dialkyl ketone (Scheme 340). The authors envisioned this disconnection between an alkyl halide and an acid chloride, and the resultant transformation proceeded in 47% yield of (−)-berkelic acid methyl ester. The mild reaction conditions ensured retention of any stereocenters previously set in the synthesis. Further work from Hong-Gang Cheng and Qianghui Zhou was able to decrease the reaction time from 10 to 5 h with no difference in yield.488 Ni-Catalyzed Cross-Electrophile Coupling Step in the Total Synthesis of (−)-Berkelic Acid (2021) Alkylated Alkynes Currently, the cross-electrophile coupling of alkynyl electrophiles with alkyl radical precursors to generate C(sp)–C(sp3) bonds has been relatively under-explored. Several reasons could explain this situation: (1) alkyne nucleophiles are easier to access, (2) SN2 reactions of alkynyl nucleophiles with alkyl electrophiles are often high-yielding, and (3) Sonagashira coupling of terminal alkynes with alkyl electrophiles has also been reported.489 Nevertheless, an XEC approach to access these products could offer advantages, as alkynyl anions are both strong bases and nucleophiles, while alkynyl halides are straightforward to access from terminal alkynes.490−493 Generally speaking, alkynyl bromides are more reactive than C(sp2)–Br species (alkynyl–Br > alkenyl–Br > aryl–Br), so the challenge remains effectively matching rates of activation of desired coupling partners. However, a number of challenges must be considered with the XEC of alkynyl electrophiles. The high reactivity of alkynyl electrophiles may hinder the overall selectivity of the reaction.494,495 Second, the low steric bulk of alkynes allows for rapid transmetalation and the formation of homocoupled diynes. Lastly, alkynes can act as both radical acceptors and as ligands, leading to deleterious reactivity and/or catalyst death.494 The mechanisms invoked are typically analogous to those proposed for C(sp2)–C(sp3) XEC reactions (Figure 32), with the alkynyl electrophile as the two-electron oxidative addition partner. However, mechanistic studies of these systems remain underdeveloped. For example, no alkynylnickel(II) species has been fully characterized to date. General mechanism for Ni-catalyzed cross-electrophile coupling to form C(sp)–C(sp3) bonds. Due to a smaller range of reports, current ligands used in C(sp)–C(sp3) reactions are limited to three bidentate nitrogen ligands, which are used in C(sp2)–C(sp3) reactions frequently (Figure 33). This is not to say that these ligands represent the full range of potential ligands in future C(sp)–C(sp3) XEC reactions; rather, it is likely that a range of ligands remain underexplored for this coupling type. Ligands used in C(sp)–C(sp3) XEC reactions. *Denotes chiral center. The use of alkynyl bromides in XEC was first reported in 2017 by our group, through the decarboxylative coupling of NHP esters with bromoalkynes (Scheme 341).496 While initial conditions yielded primarily alkynyl homodimer (which appears to be due to transmetalation between two alkynylnickel(II) species), the addition of stoichiometric LiBr additive shut down this deleterious pathway and facilitated product formation. A variety of internal alkynes with good functional-group tolerance, including ketones, nitriles, secondary amides, and alkyl bromides. Running the reaction without nickel or ligand resulted in no consumption of alkynyl bromide, ruling out direct insertion of Mn into the alkynyl halide. Furthermore, studies into the possible nickel intermediates were investigated by separately reacting the two electrophiles with (dtbbpy)Ni0(COD). The resulting complexes were both able to form product when reacted with the complementary electrophile, indicating that an alkyl-first mechanism could be possible under these conditions. Synthetically, this approach engages alkyl carboxylic acids directly, providing a shorter sequence to alkylated alkynes compared to routes that require aldehyde intermediates. Decarboxylative XEC of NHP Esters with Alkynyl Bromides (2017) Hong Yan, Yi Wang, Jianlin Han, and co-workers reported the cross-electrophile coupling of alkynyl bromides with N-alkyl pyridinium salts (Scheme 342).284 The authors focused on the coupling of TIPS–C≡C–Br, and they demonstrate that the N-alkyl pyridinium can be generated in situ without loss in yield. This report is part of a larger study that details the XEC of alkyl pyridinium salts with aryl, vinyl, and alkyl electrophiles to form C(sp2)–C(sp3) and C(sp3)–C(sp3) bonds, as outlined in Schemes 166 and 369, respectively. Ni-Catalyzed Deaminative XEC of Primary N-Alkyl Pyridinium Salts with Alkynyl Bromides (2019) With in situ generated N-alkylpyridinium. Rueping, Huifeng Yue, and co-workers reported the Ni-catalyzed cross-electrophile coupling of alkynyl bromides with α-acetoxy iodides to form products resembling those made through alkynyl nucleophile addition to aldehydes (Scheme 343).278 These iodide substrates form a ketyl radical which can be captured by the nickel catalyst and undergo reductive elimination. This report primarily focused on the coupling of α-oxy iodide substrates with aryl (see section 4.2.3.1, Scheme 160), vinyl, and acyl halide electrophiles under various approaches. Two examples of XEC on alkynyl bromides were included in this study. Ni-Catalyzed XEC of α-Acetoxy Iodides with Alkynyl Bromides (2022) Tao Xu and colleagues reported the first enantioconvergent coupling of alkynyl bromides with α-bromo phosphonates to form enantioenriched α-chiral phosphonates (Scheme 344).497 This method utilized an organic photoredox cocatalyst (3DPAFIPN), as attempts to use zerovalent metal reductants (e.g., Zn, Mn) provided low yields (≤7%). Mechanistic studies are consistent with radical generation mediated by the photocatalyst instead of nickel. Overall, the method was able to engage variety of silylated, alkylated, and arylated alkynyl bromides. The synthetic utility was highlighted in a gram scale synthesis (70%, 90% ee) of the model substrate, and a series of product derivatizations at the phosphorus and alkyne sites. Enantioconvergent XEC of α-Bromo Phosphonates with Alkynyl Bromides (2023) C(sp3)–C(sp3) Bond Formation Overview The use of two C(sp3) coupling partners to generate C(sp3)–C(sp3) bonds has not been as widely demonstrated compared to other sections within this review. The coupling of two C(sp3) electrophiles is challenging because of additional side reactions (β-hydride elimination) and because some of the elementary steps become more difficult or complex (oxidative addition, reductive elimination). Thus, matching the rates of radical generation, radical capture, and C(sp3) oxidative addition of alkyl halides or pseudohalides, are crucial to achieving cross-selectivity. Substrates and Organization In comparison to cross-electrophile coupling methods involving the formation of C(sp2)–C(sp3) bonds, more diverse and tunable radical sources, such as oxalates, pyridinium salts, N-hydroxyphthalimide esters or other redox active esters, are frequently utilized in this area. Additionally, alkyl halides/pseudohalides are also attractive reagents for these transformations, as they are generally commercially available or easily prepared via robust reactions (e.g., Appel reaction of alcohols, or displacement of alkyl tosylates/mesylates by the corresponding halide). Specifically, alkyl mesylates and alkyl tosylates are usually unreactive toward nickel, allowing for controlled formation of reactive intermediates (usually via in situ exchange with halide salts). This section will discuss the use of alkyl electrophiles in both intramolecular (ring formation/contraction) and intermolecular reactions to generate allyl–, benzyl–, and alkyl–alkyl bonds. Catalysts and Ligands Typical ligands employed for this reaction class involve L-type ligands such as amines and phosphines, similar to those utilized in other sections of this review (Figures 34 and 35). Multidentate amine ligands have complex redox activity, enabling radical generation.181 In contrast, fewer examples of alkyl radical generation exist for phosphine complexes. In comparison to amines, phosphine ligands were most successful in facilitating ring formation and polar–polar type mechanisms discussed in section 6.2, Intramolecular C(sp3)–C(sp3) XEC. Ligands used in C(sp3)−C(sp3) XEC reactions. *Denotes chiral center. Distribution of ligands used in C(sp3)−C(sp3) XEC reactions. Mechanisms In the Ni-catalyzed XEC of two alkyl electrophiles, three primary general mechanisms are proposed: (1) a mechanism with two different radicals, where the ordering and selectivity depend on both the inherent reactivity of the radicals and on the catalyst (Figure 36); (2) a mechanism involving a nonradical oxidative addition of one C(sp3) substrate (allyl, benzyl) and an alkyl radical (Figure 37); and (3) a mechanism involving only polar, nonradical steps (Figure 38). Two-radical mechanism for C(sp3)−C(sp3) bond formation. Alkyl radicals could be generated via low valent Ni species, reductants, or by other means. Polar/radical mechanism for C(sp3)−C(sp3) bond formation. SN2-type mechanism of a nickel(II) species to generate C(sp3)−C(sp3) strained ring systems. The two-radical mechanism (Figure 36) has a central challenge of obtaining selectivity from two different radicals. However, for certain pairs of substrates, where the rate of formation of the two radicals is matched and one of the radicals is slow to self-couple, high selectivities can be achieved.112 Balancing the rate of radical generation presents its own challenges and opportunities because there are a number of possibilities for radical generation: (L)Ni0, (L)NiIX, (L)NiI(Csp3), and even the reductant. For allylic and benzylic electrophiles with oxygen-based leaving groups, nonradical oxidative addition to form an allylmetal or benzylmetal intermediate (Figure 37) enables a mechanistic pathway similar to that commonly invoked in C(sp2)−C(sp3) bond formation (Figure 22).309 Finally, studies on ring contraction reactions have demonstrated the possibility of a completely nonradical mechanism that proceeds by two SN2-type oxidative addition steps to yield the desired product (Figure 38).498 In a few of these reactions, that use methyl Grignard reagent as the terminal reductant, undesired Kumada cross-coupling is an additional potential side reaction. Intramolecular C(sp3)–C(sp3) XEC Ring-Forming Reactions In 2014, Hegui Gong, Qun Qian and co-workers developed an intramolecular cross-electrophile coupling strategy for the construction of 5- and 6-membered rings from the corresponding dihaloalkanes. (Scheme 345).499 The reaction was compatible with primary bromides, primary iodides, and benzylic chlorides. The formation of five- and six-membered rings was found to be most efficient, while smaller ring sizes were challenging (attributed to ring strain of the products). Additionally, attempts to form three- and four- membered rings under the reaction conditions resulted in oligomerization or β-hydride elimination side products Intramolecular Ni-Catalyzed XEC Cyclization of Alkyl Dihalides (2014) (a) X = Br. (b) X = I. (c) With DMA/1,4-dioxane as solvent. (d) X = Cl. In 2020, the Jarvo and Xin Hong groups reported the Ni-catalyzed formation of cyclopropanes from the intramolecular XEC of benzylic sulfonamides with alkyl chlorides (Scheme 346).498 This reaction featured the relatively rare case of a sulfonamide-based coupling partner in XEC. For acyclic benzylic sulfonamides, monosubstituted cyclopropanes were generated with a variety of heterocycles appended. Subjecting N-tosyl-4-chloropiperidines to the same reaction conditions resulted in disubstituted cyclopropanes with a pendant protected amine in excellent diastereoselectivity (>20:1 dr). DFT calculations suggest that Mg salts generated from the MeMgI reductant (and in some cases from additional MgI2 added to the reaction) activate the C–N bond for oxidative addition. Ni-Catalyzed XEC to Form Cyclopropanes by Intramolecular Coupling of Alkyl Sulfonamides with C–Cl Bonds (2020) (a) With MgI2 (1.0 equiv) added. (b) With MgI2 (1.5 equiv) added. The Jarvo and Xin Hong groups then reported the Ni-catalyzed synthesis of mono- and disubstituted 1,2-cyclopropanes from 1,3-dimesylates (Scheme 347).500 For branched and aryl cyclopropane substrates, dppm served as the optimal ligand, while rac-BINAP provided higher yields for unbranched products. MeMgI served a dual role as the reductant and as a halide exchange reagent, converting the dimesylate into the diiodide in situ. When a model diiodide was isolated and subjected to XEC conditions, the cyclopropane product was obtained in 71% yield. DFT studies suggested that the secondary carbon center is engaged by the nickel catalyst faster compared to the primary carbon center; this proposal was confirmed by competition experiments. Lastly, this method was shown to be stereoconvergent for the trans-isomer regardless of the stereochemistry of the starting material. Ni-Catalyzed XEC Synthesis of Disubstituted Cyclopropanes from 1,3-Dimesylates (2020) (a) With rac-BINAP (5 mol%) as ligand. (b) With CH2Cl2/PhMe as solvent. (c) At 0 °C. In 2021, the Jarvo group reported the Ni-catalyzed formation of fluorinated cis-cyclopropanes from 3,3-difluoro-1-arylsulfonamides/ethers (Scheme 348).501 DFT studies suggested that cis-isomer of the cyclopropane product is the favored and more stable isomer due to stronger hyperconjugation interactions. Lower overall yields were attributed to the difficulty of breaking the strong C–F bond, as well as competitive Kumada cross-coupling and β-hydride elimination side reactions. Synthesis of cis-Monofluorinated Cyclopropanes by Intramolecular Ni-Catalyzed XEC with a Difluoromethyl Group (2021) (a) X = NHTs. (b) X = OMe. Maji and co-workers reported Ni/Ir photochemical, intramolecular XEC of 1,3-alkyl dihalides to prepare functionalized cyclopropanes (Scheme 349).502 The reaction showed compatibility with alkyl bromides, chlorides, and mesylate electrophiles, due to posited in situ formation of a common 1,3-dibromide intermediate, similar to proposals previously described by Jarvo.503 The authors showed that 1,1- and 1,2-disubstituted cyclopropanes could be synthesized (the latter in in 3:1 dr). One pot mesylation and ring closure of a diol was also demonstrated. Intramolecular Ni and Ir Co-Catalyzed Photoredox XEC to Synthesize Cyclopropanes from 1,3-Di(pseudo)halides (2022) (a) With X and Y = OMs. (b) With X and Y = Br and TBACl instead of TBABr. (c) With X = Cl, Y = OMs. Ring-Contracting Reactions In 2015, the Jarvo group reported a Ni-catalyzed ring contraction of tetrahydropyrans for the synthesis of cis-cyclopropanes (Scheme 350).504 The nickel catalyst is proposed to undergo oxidative addition with the benzylic C–O bond followed by cleavage of the C–Cl bond. In contrast to reports on XEC at that time, these reactions are stereospecific: cis-tetrohydropyrans generate cis-cyclopropanes. The Grignard reagent reduces the metal center after two transmetalation steps in which a nickel(II) species then undergoes reductive elimination to release ethane, effectively turning over the catalyst. Reactions run with enantioenriched substrates showed that the reaction proceeds with net retention at the benzylic position, while the alkyl chloride reacts with net inversion. Trisubstituted tetrahydropyrans were also successfully obtained using this method. Ni-Catalyzed Formation of Disubstituted Cyclopropanes by Ring Contraction of 4-Chlorotetrahydropyrans (2015) With MgI2 (1 equiv) added. The Jarvo group expanded their tetrahydropyran ring contraction strategy to include the stereospecific synthesis of vinylcyclopropanes by the cleavage of C–O and C–F bonds (Scheme 351).505 As in their preceding study (Scheme 350), this XEC reaction proceeded with excellent stereospecificity. Yields could be improved by variation of the ligand between rac-BINAP, bpp, Xantphos, bpy, phen, and Bphen. Trisubstituted tetrahydropyrans were shown to generate 1,2,3-trisubstituted cyclopropanes, and 2-vinyltetrahydrofurans could effectively generate hydroxymethylcyclopropanes. In a systematic follow-up study, the ability of ligands to change the reaction outcome was attributed to switching the preference of nickel between 1-electron and 2-electron pathways.506 Intramolecular Ring Contraction of Tetrahydropyrans via XEC of an Allylic Ether with an Alkyl Fluoride (2016) (a) With rac-BINAP (5 mol%). (b) With Xantphos (5 mol%). Later studies from the Jarvo and Xin Hong groups led to the development of a novel domino reaction that combined an intramolecular stereospecific XEC with dicarbofunctionalization. (Scheme 352).503 The optimal conditions utilized a [(R)-BINAP]nickel(II) precatalyst, consistent with their previous reports on XEC with alkylsulfonamides (Scheme 346). Synthetic utility was demonstrated in the derivatization of cyclopropane products into LSD1 inhibitor analogues, of which several were potent to various cancer cell lines. Stoichiometric studies were consistent with oxidative addition of the nickel catalyst into the propargylic sulfonamide to form an allenylnickel(II) species as the initiating step in the catalytic sequence. Extensive DFT calculations were used to probe the reaction mechanisms, origins of observed E/Z isomeric mixtures and, stereoselectivity. Ultimately, the computed free energy profiles illustrated two competing pathways at the key zwitterionic allenylnickel(II) intermediate. Transmetalation could generate an allenylnickel(II)methyl which readily undergoes SN2′ addition to form the Z-alkene-substutituted cyclopropane. Alternatively, anticarbometalation to form a nickelacylcobutene could occur prior to cycloproane formation, which leads to the E-alkene. The two pathways only have a 0.5 kcal/mol computed free-energy difference, accounting for the low E/Z selectivity. Furthermore, transition state calculations support the observation of the stereorentive product through a double inversion mechanism (SN2-like oxidative addition followed by SN2′-type addition to form the cyclopropane). Ni-Catalyzed Domino XEC to Synthesize Vinylcyclopropanes (2021) Intermolecular C(sp3)–C(sp3) XEC Allyl–Alkyl Bond Formation In 2011, Gosmini and co-workers reported a cobalt-catalyzed cross-electrophile coupling of substituted allylic acetates with primary, secondary, and tertiary alkyl bromides (Scheme 353).507 The conditions were effective for the allylation of 1°, 2°, and 3° alkyl bromides. Substituted allylic acetates were also well-tolerated. Sterically hindered allylic carbonates were tolerated when paired with primary alkyl bromides but gave no product for secondary alkyl bromides. To promote efficient coupling of α-halocarbonyl and benzyl chloride substrates, allylic methyl carbonates were used instead of allylic acetates. The reaction was generally selective for the formation of linear products over branched products. Cobalt-Catalyzed XEC of Alkyl Bromides with Allylic Acetates and Carbonates (2011) Hegui Gong and co-workers described a Ni-catalyzed XEC of substituted allylic carbonates with secondary alkyl bromides and iodides, providing (E)-alkenes in good yield and regioselectivity for the linear product (Scheme 354).508 A CuI additive was found to improve the yield for alkyl iodide substrates, appearing to inhibit deleterious side-reactions of the alkyl iodide such as hydrodehalogenation and β-hydride elimination. For alkyl bromides, modified conditions with stoichiometric MgCl2 as additive suppressed these byproducts. Ni-Catalyzed XEC of Allylic Carbonates with Alkyl Bromides (2012) (a) Conditions A: With X = Br, Ni(COD)2 (10 mol%), ttbtpy (10 mol%), Zn (3 equiv), MgCl2 (1.5 equiv), DMA at 80 °C. (b) Conditions B: With X = I, Ni(COD)2 (10 mol%), (S)-i-Pr-PyBOX (15 mol%), Zn (3 equiv), CuI (30 mol%), DMA at 35 °C. In our 2012 report detailing the Ni-catalyzed XEC of allylic acetates and aryl bromides, (see section 4.2.5.5, Scheme 194), conditions for the XEC of allylic acetates with secondary alkyl bromides were also disclosed. (Scheme 355).309 Under these conditions, primary alkyl bromides were incompatible due to competing rapid dimerization by the terpyridine nickel catalyst.38 Ni-Catalyzed XEC of Alkyl Bromides with Allylic Acetates (2012) Our group reported a Ni-catalyzed XEC approach to homoallylic amines from allylic acetates and α-amido sulfone precursors. (Scheme 356).509 Using either Et3N (catalytic) or Cs2CO3 (stochiometric), the imines could be readily formed in situ from the α-amido sulfone. The reaction was tolerant of primary and secondary alkyl substitution adjacent to the nitrogen, but tertiary and aryl substituted sulfones exhibited decreased yields. High diastereoselectivity was observed for cinnamyl acetate derivatives, and branched homoallylic amines were typically favored compared to linear products. Running the reaction with stoichiometric Ni(COD)2 and dtbbpy in the absence of Mn afforded product in 60% yield, ruling out the formation of allylmanganese intermediates. Ni-Catalyzed XEC of α-Amido Sulfones with Allylic Acetates (2015) PG = protecting group. In 2017, Hegui Gong and co-workers reported a Ni-catalyzed XEC of tertiary alkyl bromides with allylic carbonates to generate all-carbon quaternary centers (Scheme 357).510 “Conditions A” were determined to be the most general for the coupling of tertiary alkyl bromides. However, these conditions were not optimal for allylic carbonates bearing substituents at the 3-position, and the ligand system had to be swapped to a combination of dtbbpy and pyridine-2,6-diamine for improved yields. The reaction was generally selective for the linear products, and the choice of ligand had a notable impact on regioselectivity. Changing to electron-rich and sterically hindered 4,7-MeO-2,9-Mephen as ligand could be used to enhance E/Z ratios of products with olefin geometry. Ni-Catalyzed XEC of Tertiary Alkyl Bromides with Allylic Carbonates (2017) (a) Conditions A: With NiBr2(dme) (10 mol%), (S)-i-Pr-PyBOX (15 mol%), pyridine (30 mol%), MgCl2 (1 equiv), Zn (3 equiv), DMA at 25 °C. (b) Conditions B: With Ni(COD)2 (10 mol%), dtbbpy (15 mol%), pyridine-2,6-diamine (30 mol%), MgCl2(1 equiv), Zn (3 equiv), DMA at 25 °C. (c) Conditions C With NiBr2(diglyme) (10 mol%), 4,7-MeO-2,9-Mephen (15 mol%), pyridine-2,6-diamine (30 mol%), MgBr2 (1 equiv), Mn (3 equiv) in DMA at 25 °C. The XEC of allylic carbonates with tertiary alkyl electrophiles was extended to chloro-cyclotryptamines soon thereafter by Hegui Gong, Ken Yao, Qun Qian, and co-workers (Scheme 358).511 This report focused on expanding the scope of their previous report (Scheme 357). The authors additionally show modified conditions for (E)-pentadienyl carbonate substrates with tertiary alkyl bromides. Finally, an example of strained ring XEC was demonstrated with methyl 1-bromocyclopropane-1-carboxylate with an allylic carbonate. Synthesis of Quaternary Centers from Chloro-Cyclotryptamines and Allylic Carbonates (2018) (a) Modified Conditions: NiBr2(dme) (10 mol%), 4,7-MeO-2,9-Mephen (15 mol%), pyridine-2,6-diamine (30 mol%), MgBr2 (1 equiv), Mn (3 equiv) in DMA at 25 °C. (b) With bromo-cyclotryptamine and 4,7-MeO-2,9-Mephen (15 mol%) as ligand. Benzyl–Alkyl Bond Formation In 2018, Xing-Zhong Shu and colleagues reported a Ni-catalyzed XEC of benzyl oxalates with primary and secondary alkyl bromides (Scheme 359).512 An electron-poor triaryl phosphine was the most effective ligand for this transformation, and a DMSO/DMF solvent combination helped to limit formation of benzyl alcohol side products while maintaining solubility. The scope for alkyl bromide substrates was broad, containing a variety of functional groups including phosphonate esters, amines, aldehydes, amides, borates, and free alcohols. Later mechanistic studies from Hegui Gong suggested that an oxidative addition process of primary benzylic oxalates by the nickel catalyst is possible.307 They ran the reaction with stoichiometric Ni(COD)2 and phosphine ligand with reductant omitted, which still generated ∼15% of cross-coupled product. Ni-Catalyzed XEC of Primary Benzylic Oxalates with Alkyl Bromides (2018) In 2020, Guoyin Yin, Lei Zhu, and co-workers developed a Ni-catalyzed migratory XEC of primary and secondary alkyl bromides for the synthesis of alkylated benzyl products (Scheme 360).513 It was observed that electron-donating and withdrawing groups on the arene were tolerated for this transformation. Primary alkyl chlorides could also be employed, albeit in lower yields. The identity of the secondary alkyl bromides was limited to carbocyclic substrates with a notable loss of yield being observed for acyclic and heterocyclic alkyl bromides. Deuterium-labeling experiments confirmed migration of the deuterium and supported chain-walking occurring in both coupling partners. Ni-Catalyzed Migratory XEC of Alkyl Halides (2020) (a) With X = Br, (b) With X = Cl In 2021, Hegui Gong, Deli Sun, and co-workers published a method for the XEC of tertiary alkyl bromides with benzylic chlorides and chloroformates (Scheme 361).514 Using dppe as a ligand, high yields were obtained for electron-rich benzyl chlorides and benzyl chloroformates, while low to moderate yields were observed for electron poor benzylic coupling partners. Both cyclic and acyclic tertiary alkyl bromides were competent substrates. A control reaction using a preformed Bn–ZnCl reagent and alkyl bromide under catalytic conditions provided only trace cross-product, ruling out a Neigishi-type mechanism. Ni-Catalyzed XEC of Benzyl Chlorides with Tertiary Alkyl Bromides (2021) With benzylic chloroformate instead of benzylic chloride. Alkyl–Alkyl Bond Formation In 2011, Hegui Gong and co-workers reported a Ni-catalyzed XEC between two alkyl halides (Scheme 362).515 PyBOX ligands were more efficient than other tridentate amine ligands in promoting the differentiation of the two coupling partners over homocoupling. For benzyloxy and phenyl tethered primary alkyl halides, bromides were more efficient than the corresponding alkyl iodides. 1°–1°, 2°–1°, and 2°–2° C(sp3)–C(sp3) bond linkages were all made through this approach. In order to mitigate formation of homocoupling byproducts, an excess amount of one coupling partner (3 equiv) was typically required for good yields. At the time, mechanistic studies indicated that reactions with alkyl bromides were unlikely to proceed via in situ formation of organozinc species. Ni-Catalyzed XEC of Alkyl Bromides with Alkyl Iodides and Bromides (2011) (a) With X = Br, 4-ClPyBOX (8 mol%). (b) With X = I, (S)-s-BuPyBOX (8 mol%). Two years later, Hegui Gong and colleagues reported a further advance in the Ni-catalyzed XEC of two unactivated alkyl halides (Scheme 363).52 In contrast to heterogeneous metal powder such as Zn or Mn, bis(pinacolato)diboron (B2pin2) was used as the terminal reductant, representing the first demonstration of this homogeneous reductant in Ni-catalyzed XEC. Additionally, this reductant helped improve cross-selectivity for the coupling of secondary alkyl bromides with primary alkyl bromides compared to their previous Ni/Zn catalytic conditions. (Scheme 362). The authors proposed that the selectivity originates from the Ni–Bpin intermediate, which can differentiate the two alkyl halides based on steric hindrance and reactivity. Subjecting the preformed alkyl–Bpin to reaction conditions did not result in cross-coupling, supporting that an in situ Suzuki process was unlikely. Ni-Catalyzed XEC of Alkyl Halides Using B2pin2 as Reductant (2013) (a) With X= Br. (b) With X = I. In 2014, Hegui Gong, Kunhua Lin and co-workers achieved the methylation of secondary and primary alkyl bromides with MeOTs using a (ttbtpy)nickel catalyst system.438 A variety of functional groups are tolerated including indoles, protected alcohols and amines, aryl chlorides, and carbonyls (Scheme 364). Free sulfonamides and sterically hindered primary alkyl bromides resulted in lower yields. This method was extended to the methylation of acid chlorides to form methyl ketones, under modified conditions (see section 4.4.2.3, Scheme 304). The authors attribute the success of MeOTs as a methylating reagent to the slow exchange of methyl tosylate to methyl halides, maintaining a low concentration of the reactive species under the reaction conditions. Consequently, the rates of oxidative addition between the methyl and alkyl coupling partners are kinetically balanced, enabling productive reactivity. This is further backed up by the fact that replacing MeOTs with MeI led to trace yields. Ni-Catalyzed Methylation of Alkyl Bromides with Methyl p-Toluenesulfonate (2014) Ratio of product to hydrodehalogenated byproduct detected by 1H NMR. In 2018, Hegui Gong and Guobin Ma reported a copper cocatalyzed trifluoromethylation of primary and secondary alkyl iodides with Togni’s reagent (Scheme 365).516 The role of nickel in this reaction is to suppress alkyl borylation side reactions and bond formation is proposed to occur on copper. Running the reaction without nickel still afforded product but in lower yield. Notable functionality tolerated under these conditions are free anilines and aryl/alkyl bromides. Stochiometric studies showed that both Cu(I)–CF3 and Cu(II)–CF3 reagents were not competent catalytic intermediates. Copper-Catalyzed XEC of Alkyl Iodides with Togni’s Reagent to Afford Trifluoromethylated Products (2018) In 2018, the MacMillan group reported a Ni and Ir cocatalyzed photoredox XEC of secondary alkyl bromides with MeOTs and with other alkyl bromides (Scheme 366).517 As in the related C(sp2)–C(sp3) coupling reactions (see section 4.2.1.2, Scheme 126),43 a silyl radical is proposed to generate alkyl radicals by XAT. In this case, changing from a supersilane to supersilanol reagent was crucial in mitigating deleterious dehalogenation pathways from reduction by the Si–H reagent. In the methylation protocol, the TBAB additive was necessary to convert MeOTs into MeBr in situ. Heterocycles, strained ring systems, protected alcohols, and amides were generally tolerated under these conditions. To achieve the XEC of two alkyl bromides, reactions utilized an excess of one coupling partner under modified reaction conditions. The authors showcased their strategy through an iterative coupling of a molecule bearing an aryl bromide and an alkyl bromide. Regioselectivity could be controlled by selection of the supersilane reductant (XEC with aryl bromide site) or supersilanol reductant (XEC with alkyl bromide site). Nickel and Iridium Metallaphotoredox XEC Alkylation of 2° Alkyl Bromides with MeOTs and Alkyl Bromides (2018) (a) With (TMS)3SiOH (1.5 equiv), Na2CO3 (2 equiv), and TBAB (2.5 equiv). (b) With (TMS)3SiOH (3 equiv) and K3PO4 (3 equiv). (c) With (TMS)3SiOH (3 equiv) and Na2CO3 (3 equiv). In 2019, Komeyama reported the XEC of alkyl tosylates with primary and secondary alkyl halides utilizing a nickel and cobalt catalyst system (Scheme 367).518 In this method, protected amines, sulfonamides, esters, saturated heterocycles, and cyano groups were all well-tolerated. The reaction is proposed to proceed via a nucleophilic cobalt species, which is generated after Vitamin-B12 is reduced by Mn. This cobalt species selectively engages the alkyl tosylate via SN2 displacement. The authors propose the product is formed following a transmetalation event between Co and Ni,174 after which reduction, oxidative addition, and subsequent reductive elimination at nickel occurs. Nickel and Cobalt Co-Catalyzed XEC of Alkyl Halides with Alkyl Tosylates (2019) (a) With X= Br. (b) With X = Cl and pyrazine (10 mol%). In 2019, MacMillan and co-workers reported the copper- and iridium-catalyzed XEC of an electrophilic CF3 salt with alkyl bromides in the presence of a tris(trimethylsilyl)silanol as an unusual reductant (Scheme 368).519 The authors highlight radical capture and reductive elimination by the copper catalyst as product-forming steps after radical formation in the presence of a photocatalyst. With optimized conditions, the developed method tolerated free alcohols, amides, esters, the benzyl position, and heterocycles such as pyrazoles and isoxazoles. Cu- and Ir-Catalyzed Trifluoromethylation of Alkyl Bromides with an Electrophilic CF3 Source (2019) In 2019, Hong Yan, Yi Wang, Jianlin Han, and co-workers reported the deaminative XEC of alkylpyridinium salts with bromoalkanes (Scheme 369).284 Five examples of 1°–1° alkyl–alkyl couplings were demonstrated. This report also details the XEC of alkylpyridinium salts with aryl, vinyl, and alkynyl electrophiles to form C(sp2)–C(sp3) and C(sp)–C(sp3) bonds, as outlined in Schemes 167 and 342, respectively. Ni-Catalyzed XEC of N-Alkyl Pyridinium Salts with Primary Alkyl Bromides (2019) In 2020, the Martin group reported a photoredox XEC approach to form C(sp3)–C(sp3) bonds from aliphatic alcohol feedstocks using N-alkoxyphthalimide ethers and alkyl bromides (Scheme 370).312 In contrast to their C(sp2)–C(sp3) protocol (see section 4.2.5.6, Scheme 197), using a tridentate terpyridine ligand facilitated product formation in comparison to bipyridine ligands. Mechanistic probes were consistent with the formation of an oxygen centered radical on the N-alkoxyphthalimide ethers upon irradiation. The authors proposed that a β-scission event generates a carbon centered radical, which can react with a downstream alkylnickel species formed from the nickel catalyst and the alkyl bromide. This method demonstrated compatibility with primary alkyl bromides containing alkenes, free alcohols, nitriles, as well as secondary alkyl bromides. Photoredox XEC of Alkyl Phthalimide Ethers with Alkyl Bromides (2020) Jianyou Mao, Walsh, and co-workers reported the decarbonylative XEC of cyclic anhydrides with alkyl bromides (Scheme 371).520 The authors propose this reaction occurs via a nonradical activation of the cyclic anhydride. Following polar oxidative addition of the cyclic anhydride compound to the nickel center, decarbonylation occurs to generate a nickel homoenolate intermediate.521 Unsymmetrical anhydrides were selective for coupling at the less hindered site. Notably, the XEC with cis-2,3-dimethylsuccinic anhydride occurred with excellent stereospecificity. Decarbonylative XEC of Cyclic Anhydrides with Alkyl Bromides (2020) The Watson group developed a Ni-catalyzed methylation of secondary N-alkylpyridiniums with methyl iodide. (Scheme 372).522 This method could be utilized to methylate structurally diverse substrates containing heterocycles, including pharmaceutically relevant substrates isoxepac and ketoprofen could be methylated. A couple examples of isotopically labeled MeI derivatives were also demonstrated. Primary alkylpyridiniums afforded lower yields, as the slower rate of radical generation from are not well-matched with MeI. Ni-Catalyzed XEC of Secondary N-Alkyl Pyridinium Salts with Methyl Iodide (2021) In 2021, Xi-Sheng Wang and co-workers developed a Ni-catalyzed monofluoromethylation of alkyl tosylates with bromofluoromethane as the fluorinating reagent (Scheme 373).523 This method utilized B2(neo)2 as a homogeneous reductant. As observed by Hegui Gong with analogous systems, mechanistic experiments indicated that formation of alkylboronate intermediates was unlikely. A pyridyl-imidazoline nickel catalyst system outperformed other classes of bidentate ligands for this transformation. Ni-Catalyzed XEC of Alkyl Tosylates with Monofluoromethyl Bromide (2021) In 2021, Ming Joo Koh and colleagues reported a photochemical XEC of secondary N-alkylpyridinium salts with primary alkyl iodides (Scheme 374).291 This report also describes conditions for the C(sp2)–C(sp3) XEC of N-alkylpyridiniums with aryl bromides (see section 4.2.4.3, Scheme 174). The authors propose that the N-alkylpyridinium salt forms an EDA complex with the Hantzsch ester, which can be photoexcited to induce single electron transfer and fragmentation to generate an alkyl radical. The authors showed that alkyl aldehydes were better tolerated using their photochemical conditions compared to conditions using heterogeneous metallic reductants. Photochemical XEC of Secondary N-Alkyl Pyridinium Salts with Primary Alkyl Iodides (2021) In 2021, the Cernak group developed a Ni-catalyzed deaminative-decarboxylative XEC for C(sp3)–C(sp3) bond formation from N-alkylpyridinium salts and NHP esters (Scheme 375).524 Reaction optimization was done through a high throughput experimentation (HTE) campaign, in which an initial hit of 22% isolated yield was iteratively and systematically optimized to 81%. Notably, the authors found that a mixed solvent system and order of reagent addition was crucial for reaction success. In addition to a traditional substrate scope, the authors ran a 96-well plate (12 NHP esters with 8 N-alkylpyridiniums) and found their conditions afforded product (>10% UPLC/MS conversion) in 68 of the 96 reactions. This report highlights the power of HTE to enable methodology development and the discovery of new reaction conditions. Ni-Catalyzed XEC of NHP Esters with N-Alkyl Pyridinium Salts (2021) With NiBr2(dme) (10 mol%) and 4,4′-CF3bpy (10 mol%). NHP = N -hydroxyphthalimide Chuan Wang and co-workers reported conditions for the Ni-catalyzed XEC of cyclopropyl ketones with alkyl bromides (Scheme 376).525 This reaction proceeds with excellent regioselectivity for the less hindered site. This provides complementary products to those generated from radical initiated ring-opening of cyclopropyl ketones, which favor functionalization at the more substituted site. Deuteration studies support the formation of enolizable intermediates, consistent with a nickel oxidative cycloaddition step with the cyclopropyl ketone coupling partner. Ni-Catalyzed XEC of Aryl Cyclopropyl Ketones with Alkyl Bromides (2022) Concurrently in 2022, Jianyou Mao, Walsh and co-workers developed a Ni-catalyzed C–C bond activation of cyclopropyl ketones and coupled them to primary and secondary alkyl bromides (Scheme 377).526 The authors proposed that the reaction proceeds through a six membered nickelacycle intermediate, which is formed after oxidative addition and ring-opening of the cyclopropyl phenyl ketone. Control experiments ruled out the formation of organozinc intermediates. C–C Bond Activation XEC of Cyclopropyl Ketones with Alkyl Bromides (2022) Our group reported a method for the Ni-catalyzed C(sp3)–C(sp3) XEC of unactivated alkyl bromides with in situ generated NHP esters (Scheme 378).527 Electron rich NHP esters gave higher yields compared to electron poor esters, which favored decarboxylative dimerization as the major side reaction. The reaction conditions require an excess of alkyl bromide, but the desired products can be separated from alkyl bromide side products. While the focus of the scope was on 1°–1° alkyl linkages, examples of more hindered 2° and 3° coupling partners were demonstrated in lower yield. In addition, alkyl iodides and benzyl chlorides were also successfully implemented in the coupling with NHP esters in comparable yield. Ni-Catalyzed XEC of Alkyl Bromides with In Situ Generated NHP Esters (2022) Baran and co-workers reported a Ni-catalyzed doubly decarboxylative cross-electrophile coupling of alkyl carboxylic acids driven electrochemically in an undivided cell (Scheme 379).528 Both acids could be activated in situ to the NHP ester prior to cross-coupling without a solvent swap. An excess of one of the acids (1.5 to 3 equiv, generally the less expensive coupling partner) was needed to avoid competitive homodimerization products arising from both acids. Various combinations of 1°–1°, 1°–2°, 2°–2°, and 1°–3° couplings were all compatible in this method. The authors highlighted the synthetic utility of this approach by decreasing the step-count to the synthesis of known intermediates previously made through 2-electron disconnections. Radical clock experiments performed with cyclopropylmethyl- and 5-hexenyl-NHP esters unambiguously confirmed that both coupling partners form alkyl radicals. Ni-Catalyzed Doubly-Decarboxylative XEC Driven by Electrochemistry (2022) Ming Joo Koh and Quanquan Wang reported the synthesis of C-glycosides via the Ni-catalyzed XEC of glycosyl halides with redox active amine and carboxylic acid derivatives (Scheme 380).529 Hantzsch ester was used to form a photoinduced EDA complex with either the NHP ester or pyridinium salt, promoting alkyl radical generation. UV–vis absorption studies illustrated the crucial role of additives in generating the EDA complex. The scope of the reaction was broad, showing compatibility with short peptides and other protected sugars. Radical-clock and radical trapping experiments supported the formation of alkyl radicals from both coupling partners. Photoinduced XEC of Glycosyl Halides with NHP Esters or N-Alkyl Pyridiniums (2022) (a) With X = Cl, N-alkylpyridinium (2 equiv), Et3N (3 equiv), and DMA. (b) With X = Br, NHP ester (2 equiv), LiI (2 equiv), and DMA/MTBE (1:1). In 2023, Wei Shu and co-workers developed a ligand-controlled regiodivergent XEC of secondary alkyl bromides with primary and secondary alkyl bromides (Scheme 381).530 Three sets of conditions were reported, where different degrees of chain-walking across the δ-bromoamide substrate are promoted by choice of ligand. Accordingly, a variety of remote couplings to the β-, γ-, and δ- positions of these alkyl amides was achieved in excellent regioselectivity. Longer chain bromoamides and δ-bromoketones also exhibited this ligand-controlled regiodivergency. Outside of ligand-selection, there also appeared to be a solvent effect on regioselectivity, as protic solvent mixtures seemed to promote chain-walking, while aprotic solvents favored coupling at the original C–Br site. Ni-Catalyzed Regioselective XEC of δ-Bromoamides (2023) (a) Conditions A: [Ni] = NiBr2(dme), ligand = 4-ClPyBOX, and DMA. (b) Conditions B: [Ni] = NiCl2•6H2O, ligand = 5,5′-Mebpy, and MeOH/TFE. (c) Conditions C: [Ni] = NiBr2(dme), ligand = BOX-5, and MeOH. PMP = para-methoxyphenyl. Enantioselective C(sp3)–C(sp3) XEC Shouyun Yu and Hong-Hao Zhang reported the enantioselective photochemical, Pd-catalyzed XEC of allylic acetates with secondary and tertiary alkyl bromides (Scheme 382).531 This method furnished products that contained adjacent tertiary and quaternary carbon centers, with a stereocenter set at the tertiary carbon. Using Hantzsch ester as a terminal reductant and a chiral phosphine ligand, the authors were able to couple a range of disubstituted allylic acetates with high enantio- and regioselectivity. In addition to tertiary alkyl bromides, secondary alkyl bromides could also be coupled, albeit in lower yield. Mechanistic experiments suggest that this reaction proceeds by an allylpalladium intermediate and an alkyl radical, but the authors acknowledged an excited state palladium pathway is also possible. Enantioselective Pd and Ir Co-Catalyzed Photochemical XEC of Allylic Acetates with Alkyl Bromides (2023) PMP = para-methoxyphenyl. (a) At 0 °C. In 2023, Tao Xu and co-workers developed a Ni-catalyzed enantioconvergent XEC of alkyl iodides with alkyl α-chloroboronates (Scheme 383).532 The addition of water helped increase yields, possibly by improving solubility of the inorganic base. Employing a chiral BOX ligand ensured high enantioselectivity. The authors showcased their method by synthesizing a key chiral intermediate in the total synthesis of Calonyctin A2 in a single XEC step, which had only been reported in several steps in previous total syntheses. Ni-Catalyzed Enantioconvergent XEC of α-Chloroboronates with Alkyl Iodides (2023) Synthetic Applications of C(sp3)–C(sp3) XEC Ming Yang and co-workers utilized XEC conditions in their modular total syntheses of trans-clerodane and sesquiterpene hydroquinone natural products, adopting conditions first reported by Shu512 (Scheme 384).533 The authors used XEC in the final step of the synthesis of annonene to join together an alkyl bromide with a heterobenzyl oxalate fragment. A subsequent oxidation step affords the related natural product PL-3. XEC in the Total Synthesis of Annonene (2022) Difunctionalization of Alkenes and Alkynes with Two Electrophiles Alkene Difunctionalization Cross-electrophile difunctionalization of alkenes with transition metal catalysts represents an efficient strategy to construct complex carbon skeletons through multicomponent coupling. The major challenge of this approach is avoiding the many possible side products (e.g., unproductive pairwise couplings). While several successful difunctionalization strategies have been developed using palladium catalysts, the general ease and favorability of β-hydride elimination from palladium(II) intermediates remains a challenge. In contrast, the 3d transition metals have two advantages as these metals can access oxidation states, electronic configurations, and geometries that can slow β-hydride elimination.534−536 These differences in reactivity, in conjunction with the ability of nickel catalysts to generate and capture organic radicals, has enabled a diversification of alkene difunctionalization methodology beyond the capability of palladium.537 Indeed, we found that nickel is the main metal utilized for transformations discussed in this chapter. Owing to these advantages, the repository of inter- and intramolecular alkene difunctionalization reactions has expanded to include transformations such as diarylation, enantioselective dialkylation, and regioselective three-component coupling reactions utilizing both activated and unactivated alkenes. Furthermore, the development of such transformations has placed reductive difunctionalization as an increasingly utilized tool in total synthesis.538 In this section we describe transition metal-mediated inter- and intramolecular difunctionalization of alkenes using two σ-electrophiles. Stereoselective variants of these transformations are highlighted. We also discuss total syntheses that apply these alkene difunctionalization strategies. Additions in which two of the coupling partners are π-electrophiles, such as a carbonyl or another alkene, will not be discussed even if they are net reductive (e.g., additions to fluoroalkenes with subsequent β–F elimination). Outstanding challenges to this area include formation of rings with >5–6 atoms using cyclization methods and developing enantioselective variants of cyclization reactions with tethered C(sp3) electrophiles. Furthermore, the application of photochemical and electrochemical technologies in this area remains somewhat limited. Mechanisms for alkene difunctionalization generally proceed analogously to the conventional two-component cross-electrophile coupling (Figure 22). The alkene insertion generally occurs from either radical addition to an alkene (inter- or intramolecular, Figure 39) or migratory insertion of an aryl or alkylnickel bond into an alkene (Figure 40, most commonly intermolecular). General intermolecular alkene difunctionalization mechanism. While oxidative addition at Ni0 is depicted, oxidative addition from NiI followed by sequential reduction to form the same NiII complex is also possible.535 Radical generation (red) is depicted as originating from a low valent Ni species; however, radicals (aryl or alkyl) could be generated by other mechanisms. General intramolecular alkene difunctionalization mechanism. While oxidative addition at Ni0 is depicted, oxidative addition from NiI followed by reduction to form the same NiII complex is also possible. Additionally, migratory insertion can occur from either a NiI or NiII species.539 For radical addition, general strategies have been developed to ensure success (Figure 39). The intramolecular reaction is quite general as long as the ring closure involves a 5- or 6-membered ring and the thermochemistry for the ring closure is favorable. The intermolecular reaction can be challenging if both the first radical and the second radical (formed after addition to alkene) have similar reactivity with the nickel catalyst. The formation of the two-component product can be avoided if (1) the first-formed radical will not couple under the conditions (e.g., tertiary radicals require different catalysts than primary and secondary)540 or sometimes, (2) an excess of an electron poor acceptor alkene is used. Migratory insertion into alkenes can provide a straightforward way to access metal–C(sp3) intermediates that can (1) react directly with another electrophilic coupling partner, or (2) undergo reduction to afford a low valent metal intermediate primed for oxidative addition. For the inter- and intramolecular reactions, migratory insertion strategies have been used in directing group-mediated reactions, providing a method toward regiocontrol that is otherwise inaccessible.541 For intramolecular reactions, chiral catalysts can facilitate construction of stereogenic centers through enantio- or diastereo-determining migratory insertion, which has been demonstrated using both internal and terminal alkenes.542 Tuning alkene reactivity in intramolecular reactions, especially for internal alkenes, can be used to mitigate formation of Heck and/or direct coupling byproducts.543−545 Due to the added complexity inherent to three-component couplings, the ligands utilized in this section are quite diverse (Figure 41, Figure 42). While bipyridine ligands are still the most utilized (20%), a sizable portion of reports use no exogenous ligand and rely on either 8-aminoquinoline (AQ) or quinolinamide (QA) as a directing group. In addition, bioxazoline (BiOX) and pyridyl oxazoline (PyOX) ligands represent a much larger portion of ligands used in this section due to an increased proportion of enantioselective reactions. Finally, more P,N-ligands are used in this section, particularly phosphinooxazoline (PHOX) and phosphinoferrocenyloxazoline (PhosFerrox); this ligand type is only seen in this review when adding electrophiles across a π-system (see Alkyne Difunctionalization, section 7.2, and C–Si, section 8.1). Structure of ligands used in the cross-electrophile difunctionalization of alkenes. *Denotes chiral center. Distribution of ligand-types used in the cross-electrophile difunctionalization of alkenes. Intermolecular, Three-Component Difunctionalizations The reactions in this section involve three reactants (two σ-electrophiles and one alkene) and result in a product with two new C–C bonds. A few C–X bond forming reactions are also discussed. Addition of C(sp2) and C(sp3) Electrophiles Across Alkenes In 2017, the Nevado group reported an intermolecular alkene dicarbofunctionalization of tertiary alkyl iodides and aryl iodides across a variety of alkenes (Scheme 385).546 Tetrakis(dimethylamino)ethylene (TDAE) was superior to metal powder reductants. The conditions did not activate C(sp2)–Br and C(sp2)–Cl bonds. Both electron-rich and electron-poor alkenes could be utilized; specifically, crotononitrile afforded radical addition products with high diastereoselectivity. A number of mechanistic experiments, including stoichiometric studies, were consistent with formation of an arylnickel(II) complex and addition of the tertiary radical to the alkene (Figure 39). Further control experiments ruled out the formation of a secondary alkyl iodide intermediate. Ni-Catalyzed Cross-Electrophile Dicarbofunctionalization of Alkenes with Tertiary Alkyl Iodides and Aryl Iodides (2017) Lingling Chu and colleagues developed a three-component carboacylation of alkenes with acid chlorides and fluoroalkyl iodides to synthesize β-fluoroalkyl ketones (Scheme 386).547 A range of electronics were tolerated on the benzoic acid chloride, and alkenes with a variety of weakly coordinating functional groups were competent coupling partners. In reactions of more complex substrates with multiple alkenes, chemoselectivity for the alkene proximal to the coordinating group was observed. Ni-Catalyzed Carboacylation of Alkenes with Benzoyl Chlorides and Perfluoroalkyl Iodides (2018) (a) With Zn (3 equiv) at 40 °C. (b) With alkene (2 equiv) in 4:1 MeCN/DME. The reliance on functionalized alkenes in their 2017 report motivated the Nevado group to target simple terminal alkenes and dienes in a follow-up report (Scheme 387).548 High regioselectivity and excellent chemoselectivity was observed. Additionally, 1,n,(di)-en-ynes, trienes, and dienes could be selectively functionalized under the optimized conditions. In contrast to their 2017 report, DFT analysis revealed that radical generation by a nickel(I) iodide species was thermodynamically unfavorable. However, activation of the alkyl iodide with different nickel species was probed, and results revealed that low valent nickel species could consistently activate the alkyl halide, while nickel(II) species could not. While the exact speciation of the nickel catalyst throughout this catalytic cycle remains unclear, stoichiometric studies with arylnickel(II) complexes with TDAE provide support for the reduction of these complexes in this reaction. Ni-Catalyzed Cross-Electrophile Dicarbofunctionalization of Alkenes, Trienes, and Di-ynes with Tertiary Alkyl and Aryl Iodides (2019) Martin and co-workers developed a cross-electrophile difunctionalization method that added tertiary alkyl bromides and bromoarenes across vinyl boronates (Scheme 388).549 The difunctionalized product was afforded in high yields, with no evidence of competitive Suzuki–Miyaura or Heck-type side reactivity. Although only tertiary alkyl bromides were effective, the scope of aryl coupling partner was broad, and several other vinyl derivatives could be used. Stoichiometric experiments with an arylnickel(II) complex showed that TMEDA was required for product formation. Photoluminescence quenching studies supported a reductive quenching photocatalytic cycle. Ni-Catalyzed Photochemical 1,2-Dicarbofunctionalization of Vinyl Boronates with Tertiary Alkyl and Aryl Bromides (2020) (a) Yield of product after treatment with NaBO3. (b) With 4,4′-MeObpy (7.5 mol%). (c) With Ni(COD)2 (7.5 mol%) and 4,4′-MeObpy (7.5 mol%). In 2020, Chuan Wang and co-workers disclosed conditions for the arylacylation of alkenes with anhydrides and tertiary alkyl bromides (Scheme 389).550 Primary and secondary alkyl bromides and iodides were unsuitable substrates, as they underwent direct cross-coupling with benzoic acid anhydride. Stochiometric studies using Ni(COD)2 revealed that nickel(0) favors an irreversible oxidative addition with benzoic anhydride over the alkyl bromide. Additionally, a reaction performed in absence of the nickel catalyst promoted the hydroalkylation side reaction. Moreover, MgCl2 was required for this reaction. Thus, a mechanism relying on the synergy of nickel, zinc, and MgCl2 was proposed: a radical generated by either a nickel species or zinc was proposed to undergo a Giese-type addition to the alkene. Afterward, this Giese-adduct could be captured by an acylnickel(II) species, which furnishes the final product following reductive elimination (as in Figure 39). Ni-Catalyzed Alkylacylation of Alkenes with Anhydrides and Tertiary Alkyl Bromides (2020) With Zn (4 equiv), MgCl2 (2 equiv), and 4 Å molecular sieves. Ming Joo Koh and co-workers reported a substrate directing-group approach to achieve regioselective alkene arylalkylation, (Scheme 390).551 Although a directing group adds additional steps for introduction and removal, these conditions were compatible with primary alkyl iodides and provided reversed regioselectivity compared to nondirected reactions.548 Of the β–γ unsaturated amide directing group auxiliaries evaluated, 8-aminoquinoline (AQ) provided the highest yield with the desired regioselectivity. Shortened synthetic routes for three separate complex small molecules illustrated the synthetic utility of this method. The results of mechanistic studies were consistent with initial oxidative addition of the aryl halide and turnover-limiting alkyl halide activation. Ni-Catalyzed Aminoquinoline-Directed Dicarbofunctionalization of Alkenes with Alkyl Halides and Vinyl and Aryl Halides (2020) (a) With R3–X = vinyl bromide. (b) With R3–X = alkyl iodide. (c) With R3–X = aryl iodide. Xingang Zhang and co-workers developed a three component difunctionalization strategy to synthesize α,α-difluoro-γ-amino acids (Scheme 391).552 The reaction adds an aryl iodide and α,α-difluoroacetate across vinyl acetamide. Compared to the brominated reagent, the less reactive chloro(difluoro)acetate reagent suppressed hydrodehalogenation side products. Functional group compatibility was high, highlighted by amino acid and carbohydrate-containing aryl iodides. A gram scale modification of a synthetic peptide highlighted the synthetic utility of this method. Ni-Catalyzed Synthesis of α,α-Difluoro-γ-Amino Acids via Aryldifluoroacetylation of N-Vinylacetamides (2021) In 2022, a three-component arylalkylation reaction of alkenes was reported by Guoyin Yin, Lei Zhu, and co-workers. The authors observed that the regiochemical outcome of the reaction could be ligand-controlled (Scheme 392).553 The more sterically hindered diamine ligand resulted in β-arylation, while the less hindered bipyridine ligand resulted in α-arylation. Ultimately, the authors hypothesize that ligand choice biases olefin migratory insertion: the diamine ligand facilitates insertion into a arylnickel(II) species, while a bipyridine ligand facilitates insertion into a nickel(II) alkyl species. Both electron-rich and electron-deficient aryl iodides afforded the products in high yields, and some aryl bromides and aryl triflates were also compatible. Generally, the electronics of either coupling partner had little impact on the regioselectivity outcome. In addition to acrylates, acrylonitrile could be used as the alkene partner. Ni-Catalyzed Regiodivergent Difunctionalization of Acrylates with Aryl Halides and Acetals (2022) (a) With NiCl2(Py)4 (5 mol%), Diimine 1(5 mol%) in DMA. (b) With (4,4′-MeObpy)NiCl2 (7.5 mol%) in NMP. Later in 2022, an electrosynthetic approach to the arylalkylation of styrenes was reported by Chao Yang, Wujong Xia, and co-workers (Scheme 393).554 The reaction proceeds under a constant current of 1 mA in an undivided cell with a sacrificial iron anode. Electron-poor iodoarenes bearing para-, meta-, and ortho- substitution provided high yields, while electron-rich iodoarenes provided lower yields. Additionally, a variety of sterically and electronically diverse styrenes were well-tolerated. Compared to previous reports that required tertiary or perfluoroalkyl halides, this method worked favorably with secondary alkyl iodides. EPR studies verified the intermediacy of a secondary alkyl radical species forming in the reaction. Ni-Catalyzed Electrochemical Arylalkylation of Styrenes with Aryl Halides and Alkyl Iodides (2022) An alkene annulation reaction with 2′-bromobenzylic chlorides to afford indanes was reported by Lianhui Wang, Si-Hai Wu, and co-workers (Scheme 394).555 The reaction is substrate-directed by an 8-aminoquinoline (AQ) group and no additional ligand is required for the nickel catalyst. While this method worked most efficiently for terminal alkenes, decreasing the chain length of the alkenylamides showed no detrimental effect on yield and regioselectivity. One example of a 2,2-disubstituted alkene was coupled, albeit in lower yield. Ni-Catalyzed Directed Annulation of Alkenes with ortho-Bromobenzyl Chlorides (2022) Weiming Yuan and co-workers reported a photochemical Ni-catalyzed alkylacylation of electron-deficient alkenes (Scheme 395).556 Their strategy relied on the in situ formation of a photoactive electron donor–acceptor (EDA) complex of the N-hydroxyphthalimide ester with Hantzsch ester that can be directly excited by 390 nm light. Electron-poor ligands provided increased yields, with 4,4′-CO2Mebpy providing the highest yield. Only NHP esters that formed tertiary radicals were effective, as primary and secondary radicals formed the two-component coupling products. A variety of acceptor alkenes were compatible. Ni-Catalyzed Alkylacylation of Alkenes Promoted by a Photoactive Electron Donor–Acceptor Complex (2022) Stereocontrolled Addition of C(sp2) and C(sp3) Electrophiles Across Alkenes Building upon their work in racemic three-component coupling reactions, Lingling Chu and co-workers developed an enantioselective three-component coupling of unactivated terminal olefins with aryl bromides and perfluoroalkyl iodides (Scheme 396).557 A variety of electron deficient 5-bromopyrimidines, pyridines, and quinolines could be coupled. A range of perfluoroalkyl and tertiary alkyl iodides could be coupled. The indole-3 carboxylate moiety was critical in maintaining high enantioselectivity. Substitution on the indole moiety often resulted in a decrease in enantioselectivity, while removal of this directing group entirely led to low yields and poor levels of stereocontrol. Ni-Catalyzed Enantioselective Fluoroalkylarylation of Allyl Alcohol Derivatives (2020) Shortly after their initial reports, the Nevado group designed an nickel asymmetric intermolecular dicarbofunctionalization reaction of vinyl amides (Scheme 397).558 BiOx ligands proved superior compared to PyBOX or PyOx ligands, and the authors utilized DFT calculations to develop a stereochemical model for this transformation. A wide variety of iodoarenes and heterocycles provided good yields. An increase in catalyst loading allowed expansion of the scope to include vinyl bromides (in place of aryl iodides) as well as vinyl boronates and vinyl phosphonates. Ni-Catalyzed Enantioselective Arylalkylation of Vinyl Amides, Boronates, and Phosphonates (2020) (a) With X = I. (b) With X = Br. (c) With precomplexed [(S)-s-BuBiOx]NiBr2 (10 mol%) and LiBF4 (1 equiv). (d) With vinyl boronate and yield is after treatment with NaBO3•4H2O. (e) With vinyl phosphonate. In 2021, Chao Wang and co-workers reported a directed arylalkylation of homoallylic amines with diastereocontrol of both 1,2 and 1,3 stereocenters (Scheme 398).559 Of the variety of 3-butenamine compounds bearing different directing groups, quinolinamide (QA) was the most effective in minimizing side reactions. Aryl iodides bearing various ortho-, meta-, and para- functionalities were well-tolerated, as well as heteroaryl iodides, aryl bromides, and vinyl bromides. Primary and secondary alkyl iodides afforded high yields, but tertiary alkyl iodides were not compatible. The reaction is stereospecific: changing olefin geometry resulted in the formation of a different diastereomer. Ni-Catalyzed Quinolinamide-Directed Diastereoselective Difunctionalization of Alkenes with Aryl or Vinyl Halides and Alkyl Halides (2021) The low cost of 3,3,3-trifluoropropene motivated Xingang Zhang and co-workers to explore its enantioselective arylalkylation in 2022 (Scheme 399).560 Reactions with chiral BiOx ligands provided the highest enantioselectivity, with s-Bu-BiOx performing the best. Overall, reactions with electron-deficient aryl iodides (including heteroaryl iodides) gave higher yields than electron-rich aryl iodides. The broad scope required the authors to map out a number of additive effects, including iron, sodium, and calcium halide salts. Experiments supplied evidence for two different radical intermediates. Ni-Catalyzed Enantioselective Dicarbofunctionalization of 3,3,3-trifluoropropene (2022) (a) With NaI (0.5 equiv). (b) With NiBr2(dme) (13 mol%) and (S)-s-Bu-BiOx (13 mol%). (c) With FeCl3 (0.25 equiv). (d) With FeBr2 (0.25 equiv). Leveraging the reactivity of five-membered nickel metallacycles, Lingling Chu and co-workers developed an enantioselective fluoroalkylalkenylation of β,γ-unsaturated ketones (Scheme 400).561 The addition of benzoic acid decreased the amount of byproduct arising from the two-component XEC. The coordinating ability of the ketone and chelate ring size were important for enantioselectivity, with electron-rich β,γ-unsaturated ketones consistently providing >90% ee. A variety of alkenyl iodides and perfluoroalkyl iodides were compatible. In this study, the authors also further developed couplings with other directing groups to form racemic products using two C(sp2) electrophiles; the products are also shown in Scheme 400. Alkylalkenylation of Alkenes via Carbonyl-Directed Nickel XEC (2022) Method A: With X = I, Ni(COD)2 (10 mol%), s-Bu-BiOx (12 mol%), PhCO2H (0.6 equiv), Mn (2.5 equiv), and DME at −30 °C. Method B: With X = Br, NiCl2(dme) (10 mol%), Bn-BiOx (12 mol%), Mn (2.5 equiv), and diglyme at rt. Difunctionalization with C(sp2)/C(sp2) and C(sp)/C(sp) Electrophiles A [4 + 1] cycloaddition method was disclosed by the Uyeda group using dinickel catalysis, providing direct access to polysubstituted cyclopentenes from 1,3-dienes, which are difficult to engage through traditional pericyclic reactivity (Scheme 401).562 Using a sterically bulky dinuclear nickel catalyst they previously developed for methylenecyclopropanation,563 methylenecyclopentenes were successfully synthesized with minimal isomerization. A variety of substituted cycloalkenes could be accessed with control of alkene geometry. No rearranged product from a vinylcyclopropane intermediate was observed under the reaction conditions, suggesting that a mechanism proceeding through [2 + 1] cycloaddition followed by a cyclopropane rearrangement was not operative. DFT models highlighted the unique ability of the dinickel catalyst to stabilize both π systems during the C–C bond forming reductive elimination step. Ni-Catalyzed [4 + 1] Cycloadditions of Dienes with Dichlorovinylidene Electrophiles (2019) A directing group strategy enabled Aijun Lin, Hequan Yao, and co-workers to achieve alkene dialkynylation by (Scheme 402).564 8-Aminoquinone gave superior reactivity compared to other directing groups. A range of bromoalkynes bearing bulky silyl protecting groups were well tolerated. Electron neutral and electron rich aryl-substituted bromoalkynes were well tolerated, and both mono- and disubstituted alkenes, as well as internal and terminal alkenes could be employed. Notably, this was a rare case where an aromatic nitro group was tolerated under XEC conditions. Ni-Catalyzed 1,2-Dialkynylation of Alkenes Using an 8-Aminoquinoline Directing Group (2019) With Zn (3 equiv) at 40 °C. In 2022, Qing-An Chen and co-workers developed a divergent regio- and stereoselective diarylation of dienes using Ni/Cr cocatalysis that did not require the formation of a polar metal alkoxide (e.g., Cr–O) as a thermodynamic driving force (Scheme 403).565,566 Compared to bipyridine ligands, tridentate pyridine-2,6-diimine (PDI) ligands improved the yield and E/Z ratio of the products. The 1,3-diarylation reaction was tolerant of electronically and sterically diverse iodoarenes. Using modified reaction conditions, the feedstock chemical 1,3-butadiene could be functionalized to afford 1,4-diarylated products. Subjecting a 1:1 mixture of E/Z isomers led to stereoconvergence to the (E)-product, while other mechanistic probes supported Cr-mediated formation of aryl radicals. EPR studies suggested CrCl2 could regenerate PDI-ligated Ni(I) species under these conditions. Nickel- and Chromium-Catalyzed Regioselective Diarylation of Dienes (2022) Method A: aryl iodide (2.2 equiv), diene (1 equiv), conditions as in the Scheme. Method B: With aryl iodide (1 equiv), diene (3 equiv), NiCl2 (10 mol%), PDI-Ligand (12 mol%), CrCl2 (20 mol%), (PhO)2PO2H (7.5 mol%), and MeCN at 80 °C. PMP = para-methoxyphenyl The Giri group reported the Ni-catalyzed β,δ-dialkenylation of γ,δ-unsaturated nitriles with alkenyl triflates as the electrophile (Scheme 404).40 These conditions do not require a strong directing group auxiliary used in other reports, but rather rely on nitrile substitution on the alkene. In contrast to metal powder reducing agents, the authors found that 3-phenylpropyl zinc bromide the best performing. Additive effects were also notable: zinc chloride was proposed to activate the alkenyl triflate, while KPF6 was proposed to ensure a sufficient concentration of cationic nickel species. Ni-Catalyzed Regioselective β,δ-Dialkenylation of γ,δ-Unsaturated Nitriles with Vinyl Triflates (2023) Stereocontrolled Difunctionalization with C(sp2) and C(sp) Electrophiles In order to access chiral α,α,β-triarylated ethane motifs, the Diao group developed the enantioselective diarylation of styrenes with aryl and heteroaryl bromides (Scheme 405).567 Sterically hindered BiOx ligands provided the highest enantioselectivity, while other N-ligands resulted in low conversion of starting material. The use of 9-azabicyclo[3.3.1]nonane N-oxyl radical (ABNO) was essential and unusual in XEC reactions. Multivariate analysis determined that the percent buried volume of the N-oxyl radical additive was the dominant effect on enantioselectivity, with sterically unhindered N-oxyl radicals providing low enantioselectivities. In addition to the effect seen with differential Ni/ABNO stoichiometry, these correlations give evidence toward ABNO serving as an auxiliary ligand. Observed inhibition of the reaction by excess ABNO, as well as benzylic dimer formation, lent evidence for an on-cycle benzylic radical intermediate. Ni-Catalyzed Enantioselective Diarylation of Styrenes with Aryl Bromides (2019) Liang-An Chen, Liangliang Song, and co-workers reported a diastereoselective and enantioselective directed diarylation of β,γ-unsaturated AQ amides (Scheme 406).568 Both E- and Z-internal alkenes were well tolerated, as well as a variety of electronically and sterically diverse heteroaryl iodides. High syn-diastereoselectivity for E-alkene substrates was attributed to the formation of a cationic nickel species that could strongly coordinate the alkene. Building on this logic, two different cationic nickel catalyst systems, along with PHOX ligands, were utilized to achieve enantioselective diarylation for internal or terminal alkenes. Salt additives CaF2 and KF were essential to achieve high yields, possibly functioning as halide scavenging agents to facilitate regeneration of cationic arylnickel species. In addition to ligand choice, Z-alkene geometry was crucial for high enantioselectivity. Ni-Catalyzed Directed Asymmetric 1,2-Diarylation of β,γ-Unsaturated Aminoquinone Amides (2023) (a) Method A: With aryl iodide (3 equiv), Ni(OTf)2 (5 mol%), Mn (3 equiv), and DMF at 50 °C. (b) Method B: With aryl iodide (6 equiv), Ni(ClO4)2•6H2O (20 mol%), (S)-I-Pr-PHOX (25 mol%), Mn (4 equiv), KF (0.5 equiv), and DMPU at 30 °C. Method C: With aryl iodide (4 equiv), Ni(BF4)2•6H2O (20 mol%), (S)-s-Bu-PHOX (25 mol%), CaF2 (1 equiv), Mn (4 equiv), and DMF at 30 °C. Addition of C(sp3) Electrophiles Across Alkenes Ming Joo Koh, Yu Lan, and colleagues also utilized the AQ directing group to achieve vicinal dialkylation of β,γ-unsaturated amides with N-hydroxyphthalimide (NHP) esters and alkyl iodides in high regioselectivity (Scheme 407).569 The NHP ester coupling partner demonstrated broad scope: benzylic, primary, secondary, and tertiary alkyl groups were all tolerated (although benzylic 1° provided the highest yield). Meanwhile, productive yields were observed for primary alkyl iodides only. The alkene was almost exclusively unfunctionalized β,γ-unsaturated AQ amide, although examples of more substituted alkenes exhibited high diastereocontrol. The authors undertook extensive DFT studies that suggested: 1) the NHP ester reacts with [Ni0] faster than the primary alkyl iodide; 2) the alkyl iodide reacts faster with [NiI] than the NHP ester; and 3) the regioselectivity likely arises from the migratory insertion of the initially formed alkylnickel intermediate. Ni-Catalyzed Dialkylation of β,γ-Unsaturated Aminoquinone Amides with Alkyl Halides and NHP Esters (2020) Wei Shu reported the dialkylation of N-aryl 3,4-butenamides with two different alkyl bromides differentiated by their adjacent functional groups (Scheme 408).570 The primary alkyl bromide was well-matched with the α-bromoacetonitrile. The authors reported a two-step mechanism in which initial atom-transfer radical addition of the α-bromoacetonitrile forms a 3-bromobutenamide intermediate (up to 80% yield during the reaction) followed by C(sp3)–C(sp3) XEC. Ni-Catalyzed Dialkylation of N-Aryl 3,4-Butenamides with 1° Alkyl Bromides and α-Bromoacetonitrile (2022) C–X Bond Formation Across Alkenes Beginning in 2011, our group published a series of reports detailing the 1,4-addition of organic halides and chlorosilanes to α,β-unsaturated ketones.571 Although these reactions resemble a conjugate addition with trapping of the enolate by a chlorosilane, the mechanism is a catalytic version of chemistry reported by MacKenzie572 where Ni0 reacts with chlorosilane and enone to form an O-silylated allylnickel intermediate. These reagents have rich reactivity with a variety of organic halides. Coupling with secondary and tertiary alkyl bromides worked best with a catalyst composed of nickel and ttbtpy (Scheme 409), but primary alkyl bromides led to alkyl dimer products. Selective coupling with primary alkyl bromides required changing to the more hindered 6,6″-Brtpy and a different solvent (Scheme 410).573 Ni-Catalyzed 1,4-Addition of Alkyl Bromides and Chlorosilanes to α,β-Unsaturated Ketones (2011) Ni-Catalyzed 1,4-Addition of 1° Alkyl Bromides and Chlorosilanes to α,β-Unsaturated Ketones (2017) This reactivity could be extended to the three-component coupling with aryl halides and chlorosilanes (Scheme 411).574 Where the previously used terpyridine ligand gave low conversion, producing mostly silylated allyl dimer byproducts, a systematic study of bidentate pyridine ligands revealed that neocuproine afforded the highest yield and cross-selectivity (except with hindered aryl halides and acyclic E-enones, which worked best with less hindered bpy ligands). A variety of α,β-unsaturated cyclic and linear ketones and aldehydes performed well, and electron poor aryl bromides coupled in the highest yields. Notably, high-oxidation state functional groups, including sulfone and sulfur pentafluoride products could be obtained in high yield, and aryl halides that were sensitive to hydrolysis could be used. Mechanistic experiments provided concrete evidence for an enone-first mechanism that proceeded through an allylnickel(II) intermediate. Ni-Catalyzed 1,4-Addition of Aryl Halides and Chlorosilanes to α,β-Unsaturated Ketones (2013) (a) With X = I, (b) With X = Br. Xuan Zhang reported the cross-electrophile carbosilylation of an acrylonitrile in 2022 (Scheme 412).575 The PyOx ligand (along with PPh3 brought in by the precatalyst) was essential for overall reaction success. A wide range of primary, secondary, and tertiary alkyl bromides were tolerated. While chlorodimethylvinylsilane was the best performing silane, good yields could also be obtained with Ph3SiCl and Me3SiCl. As a synthetic application, the authors utilized this method to increase the hydrophobicity on the surface of silicon-based glass materials using modified reaction conditions. Ni-Catalyzed Carbosilylation of Acrylonitrile with Alkyl Bromides and Chlorosilanes (2022) One year later, Xing-Zhong Shu and co-workers reported the 1,2-carbosilylation of 1-aryl-1,3-butadienes with aryl bromides and chlorosilanes (Scheme 413).576 Optimal conditions used a 1:1:1 ratio of nickel/dppb/dtbbpy, which suggested serial ligand catalysis or the presence of two catalyst species. The authors found that bisphosphine ligands with either shorter or more rigid backbones led to sluggish arylation and larger distribution of silyl-protonation side products, while monodentate phosphate ligands gave no yield. The improvement in yield provided by electron-rich bidentate nitrogenous ligands was attributed to promotion of the silylation step. Both mono and diaryl chlorosilanes exhibited high yields, among many other diverse silyl groups. Studies supported the formation of a π-allylnickel intermediate species. Ni-Catalyzed 1,2-Carbosilylation of 1-Aryl-1,3-Butadienes with Aryl Bromides and Chlorosilanes (2023) Cyclizations The reactions in this section mostly involve two reactants: one alkene-tethered electrophile and a separate electrophilic coupling partner and result in cyclized products via the formation of two new C–C bonds. Additionally, a few C–X bond forming cyclizations are discussed. Cyclizations with C(sp2) and C(sp3) Electrophiles While radical cyclization reactions had previously been used as a mechanistic probe,577 it was not until 2018 that this reaction was optimized and turned into a useful transformation by Diao and co-workers (Scheme 414).578 Successful substrates required some bias to accelerate cyclization or else direct cross-coupling with the aryl bromide competed (as for simple, unsubstituted chains). This reaction was insensitive to the electronics and sterics of the aryl bromides and provided high yields for a variety of heterocycles. For substrates containing initial stereocenters, moderate to good diastereoselectivity was observed. Ni-Catalyzed Intramolecular Radical Cascade Cyclization and Arylation to Form Five-Membered Rings (2018) Soon thereafter, Chuan Wang developed a cyclization and alkylation of aryl bromide-tethered alkenes with alkyl halides (Scheme 415).579 Bromides were the best-performing electrophile for both reaction partners, as the iodide analogues resulted in high levels of reductive Heck side products. In comparison to PyCamCN, other pyridine-based ligands performed poorly. Various disubstituted and α,α,β-trisubstituted alkenes reacted with high diastereocontrol, suggesting that radical addition across the alkene was not an operative mechanistic step. Instead, the authors proposed an “aryl-first” mechanism followed by cyclative migratory insertion and C–C bond formation. In addition to indane cores, tetrahydroisoquinoline, isochroman, and indoline derivatives were obtained. Ni-Catalyzed Cyclization and Alkylation with Alkyl Bromides to form Benzene-Fused Carbocycles and Heterocycles (2019) Chuan Wang and co-workers then developed modified conditions that replaced the alkyl bromide coupling partner in their previous report (Scheme 415) with an NHP ester (Scheme 416).580 PyCamCN was again found to be optimal for this transformation. In this case, alkene-tethered iodoarenes were reactive, whereas bromoarenes were unreactive. The authors observed that amide solvent afforded cross-coupling of the iodoarene with the NHP ester instead of the desired product. Coupling with secondary alkyl NHP esters proceeded readily, but tertiary and benzylic NHP esters were not tolerated. Geminal disubstituted and α,α,β–trisubstituted alkenes were also successful coupling partners under these conditions, and heterocyclic indolines and dihydrobenzofurans could be used. While lower yielding, an asymmetric variation of the model substrate pair was demonstrated. Employing Bn-BiOx as the chiral ligand afforded the product in 89% ee. Ni-Catalyzed Cyclization and Alkylation with NHP Esters to Form Benzene-Fused Carbocycles and Heterocycles (2019) Liang Gong, Haibin Liu, Yu-Long Li, and co-workers reported a cyclization and alkylation of aryl bromide–tethered methacrylamides with N-alkylpyridinium salts (Scheme 417).581 A catalyst system containing NiBr2(dme) and PyOx as a ligand provided the highest yields, and TDAE was a superior reductant to both Zn and Mn. Notably, sterically hindered primary alkylamine derivatives afforded high yields, while secondary amines required slight modification of the pyridinium backbone to achieve high yield. For some alkene-tethered aryl bromides, a different PyOx ligand was necessary to achieve full consumption. Benzene-annulated cyclic compounds including dihydrobenzofurans and dihydroisoquinolines could be synthesized. Ni-Catalyzed Cyclization and Alkylation with N-Alkylpyridinium Salts to form Benzene-Fused Carbocycles and Heterocycles (2022) With aryl iodide. In 2022, the Jarvo group disclosed a method to prepare cyclopropyl substituted cyclopentanes and tetrahydrofurans by the double cyclization of the dimesylate of 1,3-dihydroxy-alk-3-ens (Scheme 418).582 The authors observed that both di- and trisubstituted alkenes could be used as substrates, with the latter forming vicinal quaternary and tertiary all-carbon centers. Both E- and Z-dimesylate compounds afforded the same major diastereomer under the optimized conditions, consistent with a mechanism involving radical exo-trig cyclization over migratory insertion. Further control experiments suggested that the dimesylate is converted into the diiodide before coupling. Meanwhile, competition studies illustrated that 5-exo-trig radical cyclization occurs at the secondary electrophilic center. Synthesis of Vicinal Cyclopropane and Cyclopentane Rings by Double Cyclization of an Alkene Dimesylate (2022) Dechun Huang, Fei Ji, and co-workers reported on a related cyclization and alkylation reaction with α-chloro-α,α-difluoroacetates and ketones (Scheme 419).583 The optimized conditions featured a dual-ligand catalyst system composed of both dppe and a bipyridine ligand. Both oxindoles and isoquinoline-1,3-diones could be synthesized under similar conditions. Ni-Catalyzed Cyclization and Alkylation to Form Difluorocarbonyl-Functionalized Oxindoles and Isoquionline-1,2-diones (2023) (a) With 4,4′-CO2Mebpy as ligand. (b) With 4,4′-MeObpy as ligand. In 2023, Morrill and Browne developed mechanochemical conditions for the cyclization and alkylation of aryl bromide-tethered alkenes with alkyl halides to form oxindoles (Scheme 420).584 Compared to typical XEC reactions with metal powders, mechanochemistry offers a few key advantages: shorter reaction times than their solution phase counterparts, and less solvent use owing to liquid-assisted grinding. The reaction proceeded in a steel ball milling machine at room temperature, affording oxindole products of comparable complexity to solution-based methods.580 A preliminary result of a chiral oxindole obtained in moderate yield and enantioselectivity using t-BuPyOx highlighted the viability of mechanochemistry for enantioselective nickel catalysis. Ni-Catalyzed Mechanochemical Cyclization and Alkylation with Alkyl Iodides to Form Oxindoles (2023) Stereocontrolled Cyclizations with C(sp2) and C(sp3) Electrophiles In 2012, Yu Peng and co-workers developed a Ni-catalyzed stereoselective cyclization of β-bromo acetals with aryl iodide (Scheme 421).205 Pyridine and a π-ligand are added to generate the catalyst in situ. Both methyl acrylate and ethyl crotonate are common, but ethyl crotonate was chosen, as methyl acrylate could hinder cross-productivity by acting as a Michael acceptor. Initial studies determined that β-bromo acetals had a much higher conversion rate than aryl iodides, and all of the aryl iodide coupling partner must be added before the β-bromo acetal is introduced. Aryl iodides bearing electron-donating and -withdrawing groups were tolerated with good endo-diastereoselectivity. Ni-Catalyzed Stereoselective Cyclization and Arylation of β-Bromo Acetals with Aryl Iodides (2012) An early example of a difunctionalization/cyclization reaction that afforded stereoenriched products was also disclosed by Yu Peng and co-workers in 2014, in which 6-exo-trig cyclization and bis-spiroketalization onto ketal-tethered alkenes afforded [5,6]-spiroketals (Scheme 422).585 Using a relatively high catalyst loading, the intramolecular radical cascade cyclization-coupling of various functionalized aryl iodides could be achieved. The substrate scope is broad, affording a large number of complex spiroketals with good diastereoselectivity. In the proposed mechanism, the authors hypothesize that the anomeric effect forces a pseudochair conformation of the radical ketal tethered species formed by halogen atom abstraction. A 5- or 6-exo trig stereoselective radical cyclization could afford the observed stereochemical outcome. Ni-Catalyzed Stereocontrolled Synthesis of Spiroketals by Intramolecular Radical Cascade Cyclization and Coupling with Aryl Iodides (2014) Chuan Wang and co-workers reported modified intramolecular radical cascade cyclization conditions that afforded enantioenriched products (Scheme 423).586 Systematic examination of chiral phosphine and oxazoline-based ligands identified BnBiOx as the optimal ligand. High yields and enantioselectivities were achieved with disubstituted olefins, while monosubstituted olefins only gave large amounts of reductive Heck side product. Stoichiometric investigations of potential organonickel intermediates showed the wrong stereoisomer was obtained in the absence of Zn reductant, which is suggestive of migratory insertion by nickel(I). Ultimately, they concluded that migratory insertion was likely enantiodetermining. Ni-Catalyzed Enantioselective Cyclization and Alkylation with Alkyl Bromides to form Benzene-Fused Carbocycles and Heterocycles (2019) In the above (Scheme 423) report, benzyl electrophiles were not compatible due to their propensity to undergo homodimerization. Motivated by this challenge, Chuan Wang and colleagues developed conditions to engage this common substrate class in their enantioselective intramolecular radical cascade cyclization and coupling (Scheme 424).587 To match the higher reactivity of benzyl chlorides, the authors utilized more reactive aryl iodides. A PyOx ligand provided the best yields and enantiocontrol. For both the iodoarene partner and the benzyl chloride partner, electronically diverse functionalities could be tolerated, but secondary benzylic chlorides were not competent substrates. The authors proposed migratory insertion at a nickel(II) species rather than at nickel(I), but still proposed that migratory insertion was enantiodetermining. Ni-Catalyzed Enantioselective Cyclization and Benzylation to form Benzene-Fused Carbocycles and Heterocycles (2020) In 2020, Chuan Wang and colleagues developed the first enantioselective carboacylation alkylation reaction (Scheme 425).588 The racemic reaction progressed with rac-t-Bu-PyOx as a ligand and Mn as a reductant in a polar solvent mixture. In this report, switching to a more electron-rich morpholine-substituted t-Bu-PyOx ligand improved enantioselectivity (up to 88% ee). Both primary and secondary alkyl iodides as well as benzyl chlorides were well tolerated. Analogous to their previous arylalkylation reactions (Schemes 423 and 424), the authors proposed an enantiodetermining migratory insertion step. Ni-Catalyzed Enantioselective Cyclization and Alkylation to Form Oxindoles (2020) (a) With rac-t-Bu-PyOx as ligand at 0 °C. (b) With 4-morpholine (S)-t-Bu-PyOx as ligand. (c) At 10 °C. (d) At rt. Motivated by the challenges of using internal alkenes in similar cyclization reactions, Jingping Qu, Yifeng Chen and colleagues developed a highly diastereo- and enantioselective carbamoylation protocol that afforded pyrrolidinones bearing vicinal stereocenters (Scheme 426).589 The electron-rich t-BuQuinium ligand provided higher enantioselectivity than the initially investigated Quinox ligand class. However, all Quinim ligands provided superior stereoinduction compared to commercially available PHOX or BiOx ligands. In addition to the PMB protecting group, other benzyl and alkyl protecting groups were well tolerated. Diverse tethered arenes could be coupled, including heteroaromatic compounds. High diastereocontrol was also achieved, even when both trans and cis alkene isomers were used, indicating that alkene configuration did not impede stereochemical outcome. Importantly, the same ligand scaffold permitted 1,1-disubstituted alkenes to be used as coupling partners, furnishing substrates with primary, secondary, and cyclic alkyl functionalities. Synthetic applications were demonstrated, affording γ-amino acids, among other synthetically useful intermediates. Through extensive DFT analysis of the two possible enantiomers formed by nickel(I) migratory insertion, the authors proposed that enantioinduction arises from a favorable orientation of the carbonyl group away from the tert-butyl group of the ligand. Ni-Catalyzed Enantioselective Reductive Alkyl-Carbamoylation of Internal Alkenes (2020) Qi-Lin Zhou reported on the enantioselective desymmetrization/alkylation of 4-hydroxy-4-(2-bromophenyl)-1,6-dienes to form enantioenriched indanol products with two stereocenters (Scheme 427).590,591 Evaluation of a series of chiral oxazoline ligands revealed that Bn-BiOX provided the highest enantioinduction. Additionally, a catalytic amount of Co(Pc) significantly improved the yield and enantioselectivity.50,174 Studies that interrupted the coupling reaction with deuteration by D2O suggested that [NiI] is necessary for migratory insertion (a pattern among these reactions). Nickel and Cobalt-Catalyzed Enantioselective Desymmetrization of 1,6-Dienes by Arylalkylation (2021) In 2021, Chuan Wang and colleagues reported a Ni-catalyzed reductive allylation of unactivated alkenes where both acyclic allyl carbonates and cyclic vinyl ethylene carbonates were engaged as coupling partners (Scheme 428).592 Initial investigations revealed that PyOx ligands gave complete regio- and stereoselectivity compared to BiOx ligands. Acetates were tested in place of carbonates, but the cross-product was found to be the major reaction pathway. Utilizing NiCl2 as the nickel source afforded the allylation product. However, the nickel source was changed to NiBr2(dme) when using electron poor aryl substrates. Electron-donating and -withdrawing substituents were well tolerated, but primary and secondary alkyl-substituted allylic carbonates formed no product. The authors expanded the scope to include vinyl ethylene carbonates, which afforded chiral allylic alcohols with high enantioselectivity. The authors propose the mechanism goes through a facially selective intramolecular migratory insertion step to determine the enantioselectivity. However, they acknowledge that the initial oxidative addition of the aryl iodide could also be facially selective. Ni-Catalyzed Allylation of Unactivated Alkenes (2021) (a) Method A: With alkene (1 equiv), allylic carbonate (1.5 equiv), NiCl2 (20 mol%), and t-Bu-PyOx (20 mol%) at 50 °C. (b) Method B: With alkene (1 equiv), allylic carbonate (1.5 equiv), NiBr2(dme) (10 mol%), and, and t-Bu-PyOx (15 mol%) at 40 °C. (c) Method C: With alkene (1.5 equiv), allylic carbonate (1 equiv), NiI2 (15 mol%), and 4-morpholinet-Bu-PyOx (20 mol%) at 30 °C. In 2021, Yifeng Chen and co-workers developed conditions for the racemic and enantioselective synthesis of 3,3-dialkylated isoindolinones (Scheme 429).593 The racemic protocol was compatible with a wide range of functionalities; notably, the reaction exhibited good chemoselectivity as Br and Cl-substituted aryl enamides provided good yields. For the enantioselective reaction, reactions with Bn-BiOx provided the highest yield and enantioselectivity. Additionally, lower temperatures and halide salt additives significantly increased conversion. Although the scope was primarily primary alkyl iodides, isopropyl iodide and phenyl iodide provided lower yields of product with high ee. Ni-Catalyzed Synthesis of 3,3-Dialkyl Isoindolines by Cyclative Arylalkylation (2021) Method A: With phen (15 mol%) at rt. Method B: With Bn-BiOx (20 mol%), LiBr (1.5 equiv) at −10 °C. Later, Yifeng Chen and co-workers reported the enantioselective cyclization desymmetrization and alkylation of 4-(N-carbamoyl)-1,6-dienes with alkyl iodides to form 1,5-disubstituted γ-lactams (Scheme 430).594 The pyrrolidinones were formed with excellent enantio- and diastereoselectivity. Chiral Quinox ligands that have a wider bite angle performed better than PyOx and BiOx ligands. When exchanging the alkyl iodide for the analogous alkyl bromide, the ee and the reaction yields dropped significantly; however, stoichiometric equivalents of LiBr were added to further improve the yield and ee value. Ni-Catalyzed Enantioselective Desymmetrizing Dicarbofunctionalization of Unactivated Alkenes (2022) Method A at rt, Method B at 10 °C. Yifeng Chen and colleagues then collaborated with the Houk group to develop a cyclative acylalkylation of internal alkenes that formed chiral pyrrolidinones with vicinal stereogenic centers (Scheme 431).539 Using a modified Quinim ligand (1-NapQuinim) under modified conditions, the authors were able to couple alkenes bearing both 1,1- and 1,2-disubstitution patterns. Based upon extensive DFT studies, the authors propose the enantiodetermining migratory insertion happens from [NiI] rather than [NiII]. Although both barriers are low, only the [NiI] pathway has a lower barrier, and it predicted an enantioselectivity consistent with experimental data. Additionally, the authors determined that, for [NiII], the migratory insertion is faster on the singlet energy surface than the triplet energy surface. As migratory insertion is a common step in many reactions in this section, these results are especially notable. Finally, calculations were used to probe the sense of induction and origin of enantioselectivity. Ni-Catalyzed Enantioselective Cyclative Carbamoylation/Alkylation Synthesis of Scalemic Pyrrolidinones with Vicinal Stereogenic Centers (2022) (a) With alkyl iodide (2 equiv), Ni (20 mol%), ligand (24 mol%), and KI (1 equiv) at 15 °C. (b) With alkyl iodide (3 equiv), Ni (15 mol%), ligand (18 mol%), 1 equiv LiBr at 10 °C. Continuing their studies of enantioselective cyclative carbamoylation/alkylation, Yifeng Chen and colleagues published approaches to substituted piperidinones (not shown) and 3,4-dihydro-2-quinolones (Scheme 432).595 Minimal success with Quinim ligands prompted the authors to screen a set of derivatized Quinox ligands, with C5-dimethylated Quinox affording the highest yield and enantioselectivity. Only primary alkyl iodides could be used, but the carbamoyl coupling partner could have various substitution on both the arene and nitrogen. The mechanistic hypothesis was similar to that of the authors’ previous reports. (Scheme 431).539 Ni-Catalyzed Enantioselective Carbamoylation/Alkylation Synthesis of Six-Membered Lactams (2022) Cyclizations with Two C(sp2) Electrophiles Wangqing Kong and co-workers reported on the cyclative arylacylation of acrylamides to form 2-oxindoles (Scheme 433).596 The authors developed conditions for cyclative coupling with both symmetric benzoic acid anhydrides and chloroformates. In both cases, ligand choice was crucial, MeCN helped reduce reductive Heck side products, and TBAB improved conversion. The authors proposed mechanism is hypothesized to go through a σ-alkylnickel(II) species. Ni-Catalyzed Cyclative Arylacylation to Form Substituted Oxindoles (2022) Method A: With anhydride, 1,10-phen-5,6-dione (20 mol%), 2 equiv K3PO4 at 60 °C. Method B: with chloroformate, bpy (20 mol%) at 100 °C. (a) With 0.4 mmol chlorofomate. (b) With aryl triflate. In 2019, Wangqing Kong and co-workers developed a complementary carbonylative approach to the same oxindole products using alkyl halides and isobutyl chloroformate as a CO source instead of activated carboxylic acids (Scheme 434).597 The reaction was proposed to proceed via a cyclization, carbonylation, and then radical capture/reductive elimination. Notably, various heterocycles including azaoxindole and quinolin-2-one could be constructed using this method. Both primary and secondary alkyl iodides could be used. Control experiments provided evidence for Ni-catalyzed decarbonylation from isobutyl chloroformate. Ni-Catalyzed Cyclative Carbonylative Arylacylation of Alkenes Affording Carbonyl-Containing Oxindoles (2019) Aiwen Lei, Wangqing Kong, and co-workers developed a cyclative arylalkenylation to form oxindoles with tethered alkenes (Scheme 435).598 The racemic variant of this reaction utilized the electron poor 4,4′-CO2Mebpy as ligand and afforded diverse oxindole products as well as tricyclic indolines and azaindolines. Several key changes—including choice of chiral ligand, a less potent reductant, and lower temperature—rendered the reaction enantioselective. A comparable scope to the racemic reaction was achieved: electronically differentiated aryl halides could be tolerated, and different geminal substituted alkenes could be coupled with minimal loss of enantioenrichment. Finally, concise total syntheses of (+)-physostigmine and (+)-physovenine were completed to demonstrate synthetic utility of this method. Ni-Catalyzed Enantioselective Cyclative Arylalkenylation and Application to the Synthesis of (+)-Physovenine and (+)-Physostigmine (2019) Method A: With NiBr2 (10 mol%), 4,4′-CO2Mebpy (20 mol%), 4 equiv MgCl2, 3 equiv Mn in DMSO at 60 °C. Method B: With Ni(COD)2 (10 mol%), (S)-Bn-BiOx (20 mol%), 3 equiv Zn in DMA at rt. Stereocontrolled Cyclizations with Two C(sp2) Electrophiles An enantioselective cyclative arylalkenylation to form 3,3-disubstituted dihydrobenzofurans was reported by Xing-Zhong Shu and co-workers in 2019 (Scheme 436).599 Proceeding at room temperature with equimolar amounts of starting materials, the reaction had best success with the (S)-3-CF3t-BuPyOx ligand; additionally, THF as a cosolvent helped reduce formation of homocoupled cyclization byproducts. Numerous cyclic and heterocyclic alkenyl triflates ranging from 5- to 8-membered rings could be coupled to give highly enantioenriched products in good yields. The aryl-iodide tethered alkene could have substitution on the aryl ring at the para- and meta positions, but not the position ortho to the iodide. Adjustment of the solvent mixture enabled the authors to extend this reaction to the synthesis of disubstituted indolines and electron-rich indanes. Ni-Catalyzed Enantioselective Cyclative Arylalkenylation to Form Dihydrobenzofurans (2019) Enantioselective cyclative diarylation was published by Wangqing Kong and co-workers a few years later (Scheme 437).186,600 The cyclization substrate, an aryl bromide containing a pendant N-protected methacrylamide, was coupled efficiently to aryl bromides using a catalyst containing the i-Pr-Phosferrox ligand (a P,N-ligand). Unusually, two reductant systems were used together (K3PO4/B2pin2 and Zn). The scope for both coupling partners was broad. No evidence of an arylzinc intermediate was found, as the reaction proceeded well with TDAE. A postcyclization alkylnickel complex was partially characterized and demonstrated to react with bromobenzene or an arylnickel(II) complex to form product. For this reason, the authors were unable to determine if arylation occurs from a second oxidative addition step or from transmetalation between two nickel(II) centers. Ni-Catalyzed Enantioselective Reductive Diarylation of Activated Alkenes by Domino Cyclization/Cross-coupling (2018) In 2021, Xing-Zhong Shu and co-workers reported an enantioselective cyclative divinylation to form 3,3-dialkyl-4-methylene-pyrrolidines (Scheme 438).601 The failure of conventional chiral ligands prompted the authors to explore Pmrox ligands. Ultimately, using a t-BuPmrox ligand while running the reaction at higher dilution and lower temperatures afforded the desired cyclized products in high yield and enantioselectivity. The alkene scope was broad, with styrenyl bromides and both cyclic and acyclic vinyl triflates affording high yields. For reactions with groups larger than methyl at R1, AgBF4 and Na2SO4 were essential to achieve higher yields. This method could also be applied to the synthesis of methylene tetrahydrofurans. Control experiments suggested a reaction pathway proceeding through sequential oxidative addition at nickel, wherein a nickel(II) species facilitates an enantiodetermining migratory insertion before a second oxidative addition to the vinyl bromide occurs. Ni-Catalyzed Enantioselective Cyclative Divinylation to form Methylene Pyrrolidines and Tetrahydrofurans (2021) With AgBF4 (0.6 equiv), Na2SO4 (2 equiv) in 1:1 DMA/THF Chuan Wang and co-workers reported a cyclative arylacylation to form indoline, indane, and dihydrobenzofurans with all-carbon quaternary centers (Scheme 439).602 Of the electrophilic acylating reagents evaluated, a pyridyl ester allowed the highest yield and enantioselectivity with t-Bu-PyOx ligand. Although not part of this review, the authors also developed arylcarbamoylation using isocyanates. Similar to their other reports, the authors propose a mechanism involving facially selective arylnickelation from [NiI]. Ni-Catalyzed Enantioselective Cyclative Arylacylation to Form Indoline, Indane, and Dihydrobenzofurans (2022) (a) With Y = CO2Py at 60 °C. (b) With Y = O=C=N and NEt3 (1 equiv) at 30 °C. Later, Xiangqing Wu, and Yifeng Chen found that the 8-Quinox ligand class could be applied to the enantioselective synthesis of oxindoles by cyclative carbamoylation/alkylation (Scheme 440).603 The catalyst system of t-Bu-8-Quinox and Ni(ClO4)2•6H2O was optimal. The closely related Quinim ligands (imidazoline vs oxazole) were ineffective. Ni-Catalyzed Enantioselective Cyclative Carbamoylation/Alkylation to form Oxindoles (2022) Cyclizations Using C(sp2) and C(sp) Electrophiles In 2021 Wangqing Kong and co-workers reported a cyclative arylcyanation to form the familiar oxindole core with cyanomethyl substitution at the 3 position (Scheme 441).604 The electrophilic N-cyano N-phenyl-p-toluenesulfonamide is considered less toxic than nucleophilic cyanating agents,605 providing an advantage to this approach. Interestingly, for this nonenantioselective method, a chiral tridentate ligand, (R)-Ph-PyBOX, was optimal. However, two enantioselective examples were demonstrated using a DuanPhos derivative provided 73% and 82% ee, respectively. After completing the synthesis of several structurally diverse oxindoles, the authors applied this method to the synthesis of isoquinoline-1,3-diones. In contrast to the method for oxindole synthesis, the reaction outcome for isoindolines was directly impacted by electronic variation of the alkene-tethered aryl bromide, but sterically differentiated arenes were tolerated. The utility of this method was showcased in an enantioselective formal synthesis of clinical Alzheimer’s drug (+)-physostigmine. Mechanistic studies were consistent with cyanation by oxidative addition of an alkylnickel(I) species to an N–CN bond. Ni-Catalyzed Cyclative Arylcyanation to form Oxindoles (2021) Another cyanation strategy was disclosed by Kaiwu Dong and colleagues in 2022 using 2-methyl-2-phenyl malononitrile as a cyanating reagent (Scheme 442).606 As in the Kong report (Scheme 439), a chiral bisphosphine ((S,S)-BDPP) was optimal. Stepwise mechanistic experiments were consistent with a mechanism involving 1,2-migratory insertion and β-carbon elimination for cyano group transfer to nickel. DFT-modeling of potential reaction intermediates indicated that a stabilizing agnostic (BDPP)Ni0 C–H during oxidative addition likely contributed the most to the observed enantioselectivity. This counterintuitive enantiodetermining step (as opposed to migratory insertion) was proposed previously by Kozlowski and Desrosiers for an enantioselective Mizoroki–Heck reaction.607 Ni-Catalyzed Enantioselective Cyclative Arylcyanation to Form Oxindoles (2022) C–X Bond Forming Cyclizations Chuan Wang and colleagues reported a cyclative iminoacylation to form pyrrolines (Scheme 443).608 The sterically encumbered cuproin was the optimal ligand for this transformation. The cyclization substrate was an alkene-tethered oxime benzoyl or pivaloyl ester. Both complex aromatic oxime esters and simple oxime esters lacking geminal disubstitution were used; notably, monosubstituted alkenes prone to β-hydride elimination were also competent substrates. An assessment of acylation partners revealed anhydrides could also be used; moreover, in situ generation of an anhydride from carboxylic acid was possible. Control experiments argued against iminyl radical formation. Ni-Catalyzed Cyclative Iminoacylation to form Substituted Pyrrolines (2018) (a) With X = OBz. (b) With X = Cl. Xingjie Zhang and Guisheng Zhang reported a cyclative iminoarylation protocol in 2023 (Scheme 444).609 A synergistic additive effect was observed with both MgBr2 and LiBr. The authors proposed that this combination of salts helped to facilitate reduction by Mn by increasing the ionic strength of the solvent. Oxime esters bearing spirocyclic, heteroaromatic, and alkenyl functionalities were well tolerated; however, internal alkenes could not be used in this method. In addition to arylation, vinylation was also achieved. The authors conducted studies that suggested initial formation of halogenated pyrrolines was followed by cross-electrophile coupling with the aryl halide. The authors could not rule out the formation of an organomanganese reagent during the reaction. Ni-Catalyzed Cyclative Iminoarylation to Form Substituted Pyrrolines (2023) TFMBz = 3,5-bis(trifluoromethyl)benzoyl You Wang, Shaolin Zhu, and co-workers reported the enantioselective coupling of alkene-tethered aryl iodides with O-benzoyl-hydroxylamines to form β-chiral amines with an aryl-substituted quaternary carbon center (Scheme 445).610 These conditions offer excellent complementary reactivity to previously reported palladium- and copper-catalyzed 1,2-carboaminations, which tend to be used to form α-chiral amines.50,174 The optimal catalyst system is a combination of a nickel PyOx catalyst with a cobalt phthalocyanine cocatalyst.50,174 The authors report that more sterically hindered groups at the alkene (R2) resulted in decreases to enantioselectivity and yields. Mechanistic studies led the authors to propose to that cyclization occurs via cyclative migratory insertion of the initial arylnickel(II) species into the tethered alkene. Nickel- and Cobalt-Catalyzed Enantioselective Coupling of Alkene-Tethered Aryl Iodides with O-Benzoyl-hydroxylamines to Form Dihydrobenzofurans (2020) Xing-Zhong Shu and co-workers reported on an asymmetric cyclative iminoalkylation reaction of alkene-tethered oxime esters in 2022 (Scheme 446).611 The optimal catalyst mixture contained both PCy3 and a PyBOX ligand; the authors proposed PCy3 stabilizes an alkylnickel(II) intermediate. Additionally, 1,8-naphthyridine helped inhibit the formation of the reduced cyclization side product. The authors observed that the leaving group on the oxime ester had a direct impact on both yield and enantioenrichment. Slight alteration of the PyBOX ligand backbone from an electron-poor to electron-rich moiety enabled coupling with secondary and tertiary alkyl iodides in moderate yield and high enantioselectivity. The authors proposed a mechanism wherein the oxime ester is first activated and cyclized before coupling with the alkyl iodide occurs. Ni-Catalyzed Enantioselective Cyclative Iminoalkylation of Alkene-Tethered Oxime Esters with Alkyl Iodides to Form Enantioenriched Pyrrolines (2022) Synthetic Applications of Cross-Electrophile Difunctionalizations Yu Peng and co-workers disclosed a series of total syntheses of compounds bearing a trans-tetrahydronaphtho[2,3-b]furan core using a double cyclization strategy (Scheme 447).612 In their initial 2016 report, a cascade reaction of an aryl-tethered β-bromo acetal was accomplished using a stoichiometric amount of a (ethylcrotonate)2Ni0(Py) complex; upon oxidation, the lactone products could be furnished in high yield and good diastereoselectivity, even for substrates bearing vicinal stereocenters. This method was applied to the total synthesis of a novel isodeoxypodophyllotoxin analogue bearing three contiguous stereocenters. Stereoselective Synthesis of Tetrahydronaphtho[2,3-b]furans Enabled by Nickel Mediated Cyclative Arylalkylation (2016) An extension of the intramolecular Ni-catalyzed reductive cyclization was demonstrated by the same group in 2017 (Scheme 448).613 Using conditions developed in a prior report, the synthesis of cis-tetrahydro(2H)-indeno[1,2-b]furan, a core of a strigolactone analogue was completed. The reaction proceeded stereoselectively to afford the tricyclic ABC ring system. Bidentate nitrogen ligands provided a higher yield than ethyl crotonate. Where previous methods had afforded both trans and cis stereoisomers for a similar cyclization, exclusively cis products were observed. Preliminary DFT studies suggested favorable pseudohalf-chair conformation of the alkyl radical intermediate is responsible for this outcome. Synthesis of a New Aromatic Strigolactone Analogue by Ni-Catalyzed Cyclative Arylalkylation (2017) Soon thereafter, Yu Peng and colleagues elaborated on the podophyllotoxin scaffold and reported the stereoselective synthesis of eight podophyllotoxin congeners (Scheme 449).614−616 Starting from commercially available 6-bromopiperonal, five steps (carried out at gram scale) afforded the key β-bromo acetal cyclization substrates. Modified conditions from their previous report produced the cis and trans-tetrahydronaphtho[2,3]c-furan isomers with excellent stereocontrol. Through a series of oxidative transformations, a total of eight podophyllum members were synthesized from these intermediates. Overall, this approach showcased the divergent qualities of this synthesis, enabled by the Ni-catalyzed cyclization step. Divergent Syntheses of Natural Podophyllotoxin and Congeners Using Ni-Catalyzed Cyclative Arylalkylation (2021) Chao Li and colleagues reported the first total syntheses of spiro-lactone ent-karanoids including longirabdiol, longirabdolatone, and effusin using XEC alkene difunctionalization (Scheme 450).617 Key to the success of this method was a copper-catalyzed tandem decarboxylative cyclization/alkenylation of a tethered alkene. Activation of a cyclic carboxylic acid intermediate with N-hydroxyphthalimide afforded a redox active ester substrate that was primed for 5-exo-trig cyclization via reductive decarboxylation. Compared to a nickel catalyst system (which provided a 34% yield with 3.2:1 dr), the combination of CuCl2 and DavePhos furnished the desired products in 60% yield and 4.2:1 dr. Structurally diverse lactone systems could be synthesized using electronically differentiated styrenyl bromides; notably, quaternary centers could be forged at both the site of cyclization and alkenylation. Subsequent transformations afford (+)-longirabdiol, and further derivatization of this compound realized the syntheses of two additional natural products. This exciting result is a rare example of a copper-catalyzed XEC reaction that could perhaps be developed further. Ni-Catalyzed Cyclative Alkylalkenylation for the Total Syntheses of (+)-Longirbdiol, (−)-Longirabdolactone, and (−)-Effusin (2019) Yu Peng and co-workers further extended their expertise in intramolecular difunctionalization to the total synthesis of linoxepin in 2022 (Scheme 451).538 Here, a cyclative arylalkylation efficiently formed the ABC tricyclic ring system in one step from a simple linear precursor. An ethylcrotonate-ligated nickel complex was again utilized as the catalyst. Acetal oxidation afforded the desired ABC tricyclic core. Following a short sequence of oxidation and C–C bond forming reactions, the synthesis of linoxepin was completed. To showcase potential divergency of the Ni-catalyzed step, several D-ring modified linoxepins were prepared from the tricyclic intermediates of the nickel step. Total Synthesis of Linoxepin Facilitated by Ni-Catalyzed Cyclative Arylalkylation Alkyne Difunctionalization The difunctionalization of alkynes via XEC is currently more limited than the difunctionalization of alkenes (section 7.1). This can be attributed to added challenges from (1) the propensity of terminal alkynes to undergo deleterious side reactivity with nickel such as cyclotrimerization, (2) control of E/Z selectivity of the resultant alkene can be difficult, and (3) most developed methods in this area cannot easily engage internal alkynes. In these reactions, it is often proposed that an alkyl radical adds across the alkyne, forming the corresponding vinyl radical.618 This vinyl radical is then engaged in a second nickel-mediated functionalization step with the other coupling partner (Figure 43). Mechanistic understanding in this area is still underdeveloped, and more complex mechanisms could be relevant on depending on coupling partners and reaction conditions. Mechanism of alkyne difunctionalization with one C(sp2)–X and one C(sp3)–X coupling partner. Depending on the coupling partners, the mechanistic details of this cycle can change (e.g., in systems with two C(sp3)–X coupling partners). Owing to a diversity of mechanistic outcomes, alkyne difunctionalization reactions utilize a broad range of ligands (Figure 44). The ligands reported in this section are also utlized in alkene difunctionalization (see Figure 41), which could offer insight into ligand scaffolds worth exploring in future alkyne difunctionalizations. Ligands used in cross-electrophile alkyne difunctionalization reactions. *Denotes chiral centers. Intermolecular, Three-Component Difunctionalization of Alkynes Yu Zhao, Ming Joo Koh, and co-workers developed a Ni-catalyzed three-component coupling of alkynyl bromides and N-hydroxyphthalimide (NHP) esters with terminal alkynes (Scheme 452).619 In addition to deriving from a more commercially abundant substrate pool, NHP esters have been shown to be well-matched for XEC reactions with alkynyl bromides. The addition of LiBr helped increase yields further and lower the formation of diyne.496 Replacing the NHP ester with an alkyl iodide only afforded cyclotrimerization byproducts and homodimerization of the alkynyl bromide. The method was compatible with primary, secondary, and tertiary alkyl NHP esters as well as both aryl and alkyl functionalized alkynyl bromides. However, internal alkynes were not tolerated with these methods. High regioselectivity and stereoselectivity for E-alkene products was observed. Ni-Catalyzed Three-Component Alkylalkynylation of Alkynyl Bromides, N-Hydroxyphthalimide (NHP) Esters, and Alkynes (2021) Maiti reported a Ni-catalyzed three-component coupling of alkynes with aryl iodides and tertiary alkyl iodides (Scheme 453).620 The reaction was found to exclusively form the anti-alkylarylation product without the need for a directing group. The reaction was most successful with electron-poor aryl iodides. Radical trapping experiments with triethylphosphite confirmed the presence of vinyl radical intermediates. Stoichiometric reactions supported arylnickel(II) being competent intermediates. Ni-Catalyzed Three-Component Coupling of Alkynes with Aryl Halides and Tertiary Alkyl Halides (2021) Wei Shu and colleagues developed a Ni-catalyzed, regio- and stereoselective approach to trisubstituted alkenes from the coupling of two different alkyl bromides with a terminal alkyne (Scheme 454).621 This method was most efficient when one of the alkyl radical precursors was a primary alkyl bromide used in large excess and the other was a tertiary alkyl bromide. When a secondary alkyl bromide was used in place of the tertiary alkyl bromide coupling partner, no product was formed. Notably, free anilines and alcohols were well tolerated. Running the reaction in the absence of the primary alkyl bromide afforded radical addition products consistent with the formation of vinyl radical intermediates. Ni-Catalyzed Dialkylation of Alkynes with Primary and Tertiary Alkyl Bromides (2022) Lingling Chu and co-workers developed a nickel catalyzed three-component coupling of alkynes with alkenyl iodides and perfluoroalkyl iodides to generate fluoroalkyl 1,3-dienes (Scheme 455).622 It was discovered that alkynes with an ortho-substituted aryl group performed best in these conditions, owing to the added hindrance slowing down undesired cyclotrimerization. Notably, a single example of an internal alkyne was shown, which are generally more limited in this type of coupling. Regio- and stereoselectivity was generally high across the substrate scope. Three-Component Coupling of Alkynes with Alkenyl Halides and Fluoroalkyl Halides (2022) Huifeng Yue and Rueping developed a Ni-catalyzed, three-component, stereodivegent synthesis of trisubstituted alkenes, where the E/Z selectivity of the product could be goverened by the mode of catalyis (Scheme 456).623 Their electrochemical conditions (Method A) favored the anti-products while their photochemical conditions (Method B) favored the syn-products. Syn-selectivity was also achieved under photoelectrochemical conditions (Method C) with higher energy light (390 nm) and removal of the iridium photocatalyst. Observed olefin selectivity outcomes were attributed to energy-transfer-mediated E to Z isomerization under photochemical conditions. Nitriles, free phenols, and sulfonamides were compatible in all three protocols. Ni-Catalyzed, Stereodivergent Synthesis of Trisubstituted Alkenes by Different Approaches (2022) Method A: With aryl bromide (1 equiv), alkyne (2 equiv), alkyl bromide (3 equiv), NiBr2(4,4′-MeObpy) (10 mol%), TMEDA (3 equiv), n-Bu4NBr (2 equiv), DMA, 4 mA, (+) graphite, (−) nickel foam. Method B: With alkyne (1 equiv), aryl bromide (2 equiv), alkyl bromide (3 equiv), [Ir] (1 mol%), NiBr2(4,4’MeObpy) (10 mol%), PMDTA (3 equiv), LiCl (3 equiv), DMA, 440 nm blue LEDs. Method C: With aryl bromide (1 equiv), alkyne (2 equiv), alkyl bromide (3 equiv), NiBr2(4,4’MeObpy) (10 mol%), TEMDA (3 equiv), n-Bu4NBr (2 equiv), DMA, 4 mA, (+)graphite, (−)nickel foam, 2 × 390 nm purple LEDs. (a) Reported as (%syn:%anti). PMDTA = N,N,N′,N″,N′′-pentamethyldiethylenetriamine. Hai-Yong Tu, Xiao-Hong Zhang and co-workers developed a Ni-catalyzed, three-component coupling of terminal alkynes with fluoroalkyl halides and acyl chlorides to form fluoroalkylated enones (Scheme 457).624 Both primary and secondary fluoroalkyl halides were utilized, and the terminal aryl alkynes could tolerate a variety of substitutions, including ortho-sterics. In general, aroyl chlorides provided high yields, and one example of pivaloyl chloride was demonstrated. A control experiment without acyl chloride present afforded products consistent with vinyl radical intermediates forming in the reaction. Three-Component Fluoroalkylacylation of Alkynes with Fluoroalkyl Halides and Acyl Chlorides (2022) At 60 °C. Shu-Yu Zhang and co-workers developed an enantioselective Ni-catalyzed reaction between an aryl acetylene, an aryl iodide, and a tertiary alkyl iodide to form axially chiral styrenes (Scheme 458).625 The addition of keto-ABNO was found to improve the enantioselectivity of the reaction and may act as an additional ligand on nickel. On the aryl iodide, both electron-donating and -withdrawing groups were tolerated, but only tertiary alkyl iodides could be used. DFT calculations supported the observed enantioselectivity, which arises from a steric clash between the allene intermediate and the aryl group on nickel. This chemistry was applied to the synthesis of a new axially chiral phosphine ligand that provided high enantioselectivity in a model asymmetric allylation reaction. Ni-Catalyzed Asymmetric Three-Component Coupling to Form Enantioenriched Axially Chiral Styrenes (2022) With aryl bromide instead of aryl iodide Chuan Wang and co-workers developed the atroposelective coupling of 1-naphthyl propargyl alcohols with aryl iodides and benzyl chlorides to form E-tetrasubstituted alkenes (Scheme 459).626 The aryl iodide and benzylic chloride coupling partners could bear electronically donating or withdrawing groups at both the ortho- and para-positions. Stochiometric studies with Ni(COD)2 showed that zinc reductant was required for enantioselectivity, due to advantageous ZnI2 forming in the reaction. This was further supported by an experiment showing how increased amounts of ZnI2 could enhance enantioselectivity from 0% ee (no ZnI2 added) to 71% ee (2.4 equiv ZnI2 added). E-Selective Synthesis of Tetrasubstituted Alkenes (2023) Cyclization Reactions The Montgomery lab developed a tandem cyclization/cross-electrophile coupling system to generate tetrasubstituted alkenes (Scheme 460).627 This system takes advantage of known alkyne-aldehyde oxidative cyclizations onto nickel centers,628 and the metallacycle is further functionalized via radical addition across the alkene. Formally, the first step of the catalytic cycle is an oxidative cyclization event, wherein a stable nickelacycle is formed in the presence of SiEt3. This nickelacycle is then able to capture an alkyl radical generated from another nickel center and undergo reductive elimination to form the tetrasubstituted alkene. Studies showed that in more concentrated reactions, primary alkyl bromides favored the E-isomer. However, secondary alkyl bromides favored the Z-isomer, and this selectivity could further be enhanced by diluting the reaction further. Alkynes tethered to alkyl bromide coupling partners were found to be unreactive in this system, suggestive of the ynal being critical for selective cyclizations/cross-coupling. Ni-Catalyzed, Tandem Metallacycle Formation and XEC of Ynals with Alkyl Bromides to Form Tetrasubstituted Alkenes (2018) (a) n-Bu4NI used in place of NaI. (b) With NiI2(bpy) (2 mol%). Most cyclization methods in this section utilize two different electrophiles, one of which has a tethered alkyne. In contrast, Hai-Yong Tu, Xing-Guo Zhang, and co-workers, developed a cyclization reaction based upon coupling a 1,4-dielectrophile with an alkyne (Scheme 461).629 This approach enabled the formation of substituted naphthalenes from the coupling of terminal or symmetric alkynes and substituted styrenes. Although the desired product could be formed without an α-electron-withdrawing group on the vinyl chloride, the reaction was most effective with either a −CF3 or −CO2Et functional group at that site. Ni-Catalyzed Formation of Substituted Naphthylenes by Cyclization of a 1,4-Dielectrophile with an Alkyne (2022) With bpy (12 mol%). Carbon–Heteroatom XEC Overview: C–C bond formations dominate the field of XEC, perhaps because most heteroatoms are natural nucleophiles and C–X cross-coupling is well-developed.630−633 On the other hand, a number of heteroatom electrophiles are either commonly available or offer other advantages, especially with heavier elements (Si, P, S) and nitrogen (−N3, −NO2, −NHOAc). The diversity makes is more difficult to generalize much further (Figure 45). Indeed, the diversity of mechanisms led us to discuss them in the corresponding subsection. Distribution of heteroatoms in C–X XEC reactions. Group 14 (Si/Ge) C–Si Bond Forming Reactions The XEC of chlorosilanes is a relatively new area, with the first report coming from Xing-Zhong Shu’s group in 2020.634 As with carbon nucleophiles, organosilicon nucleophiles can be challenging to prepare. Unlike C–X bonds, the high Si–X bond strengths exhibited by halogenated silicon reagents (e.g., 113 kcal/mol for Me3SiCl)635 can render them more challenging to activate. Unlike C–H bonds, Si–H bonds are easily activated, and hydrosilylation of π-bonds is a well-developed approach to Si–C bond formation.636−638 Oxidative addition of Si–X bonds is less developed than C–X bonds, but vinyl chlorosilanes seem to be especially reactive.639 While C–Si XEC reaction development is still in its infancy, several ligands have already been identified. Again, nitrogen ligands predominate and phosphines have only been reported as part of mixed-ligand systems (Figure 46, Figure 47). Ligands used in C–Si bond-forming XEC reactions. Distribution of ligands used in C–Si XEC reactions. Proposed mechanisms generally fall into two categories (Figure 48): 1) sequential oxidative addition of C–X and Si–X, and 2) oxidative addition of Si–X followed by radical capture. Proposed mechanisms for the XEC of silane electrophiles with carbon electrophiles. Mechanism A, with sequential oxidative addition of the aryl (pseudo)halide, followed by the chlorosilane, was supported by work done in Xing-Zhong Shu’s first report of XEC with vinyl chlorosilanes.634 Mechanism B is most analogous to the mechanisms described for C(sp2)–C(sp3) XEC reactions (see Figure 22). While the mechanism of oxidative addition for Si–Cl bonds to nickel remains unclear, initial formation of an (L)NiII(Si)(Cl) intermediate is reasonable and an Si• intermediate might be expected to participate in XAT side-reactions.640 Evidence is available for alkyl radical formation and in the coupling of alkyl bromides with chlorosilanes. Data from Chun Zhang’s group supports a mechanism analogous to C(sp2)−C(sp3) couplings of aryl halides with alkyl radicals (ring opening of bromomethylcyclopropane).160,641 Xing-Zhong Shu and co-workers reported the first XEC with silane-based electrophiles, successfully coupling vinyl chlorosilanes with aryl triflates (Scheme 462).634 Vinylchlorosilanes outperformed TMSCl, TBSCl, and other common chlorosilane reagents, as their ability to coordinate to the nickel center helped improve cross-selectivity. Functional group tolerance was broad, encompassing free alcohols, phenols, and indoles. Additionally, select aryl bromides and iodides could be engaged. In conjunction with other mechanistic probes, the stochiometric reaction with an arylnickel(II) intermediate only proceeded in the presence of Mn, suggesting that an arylnickel(I) species reacts with the vinylchlorosilane (Figure 48A). The resulting substituted organosilane products were further derivatized in downstream Hiyama cross-coupling reactions, demonstrating the synthetic utility of this method. XEC of Vinyl Chlorosilanes with Aryl Triflates (2020) With vinylchlorosilane (6 equiv) In the same report, the coupling of cyclic and acyclic vinyl triflates was achieved using a modified catalyst system composed of both phosphine and nitrogenous ligands (Scheme 463).634 Tri- and tetrasubstituted vinyl triflates were tolerated. with E-isomers coupling in high yield and with complete stereoretention. This method enabled the facile synthesis of valuable benzocyclobutene monomers in two steps. XEC of Vinyl Chlorosilanes with Vinyl Triflates (2020) The Oestreich group demonstrated the XEC of activated alkyl coupling partners with chlorosilanes to form C(sp3)–Si bonds (Scheme 464).640 Using a combination of dtbbpy and PPh3 ligands, the α-triflyloxy nitriles could be activated and efficiently coupled. In contrast to Xing-Zhong Shu’s reports, trialkylchlorosilanes were moderately reactive under these conditions. Radical trapping and radical clocks were both consistent with nonradical activation of the α-triflyloxy nitriles, in line with the mechanism described in Figure 48A. The catalyst was much faster to react with Si–Cl bonds than C–Br and C–Cl bonds, allowing organic bromides and chlorides to be tolerated. In addition to aryl halides, esters, protected alcohols, and secondary amines were also tolerated in the reaction. Formation of C(sp3) Si–C bonds via XEC of Vinyl Chlorosilanes with α-Triflyloxy Nitriles (2021) Complementary to prior studies, Xing-Zhong Shu and co-workers developed a method to engage unactivated alkyl bromides in the coupling with vinyl chlorosilanes (Scheme 465).642 A sterically hindered phenanthroline ligand improved reaction efficiency. Only primary alkyl bromides could be utilized, but they could bear a variety of unprotected, acidic functional groups. Alkynyl, cyclopropyl, and monoarylated functionalized chlorosilanes were suitable coupling partners. Competition experiments supported the alkyl bromide reacting first with nickel. One of the resulting vinylsilane products was used in a downstream Ir-catalyzed reaction to modify the hydrophobicity of a glass substrate, highlighting a material science-based application of this method. Cross-Coupling of Primary, Unactivated Alkyl Bromides with Vinyl Chlorosilanes (2021) Concurrently, Chun Zhang and colleagues also developed a cross-coupling of vinyl chlorosilanes with unactivated alkyl bromides (Scheme 466).641 Racemic 6-Met-BuPyOx outperformed other bidentate and tridentate nitrogenous ligands assessed. Both primary and secondary alkyl bromides could be utilized, and one aryl bromide, bromobenzene, was coupled successfully. Aryl and alkyl functional groups on the vinyl chlorosilanes did not hinder reactivity. Control experiments suggested a mechanism analogous to Figure 48B. Cross-Electrophile Coupling of Unactivated Alkyl Bromides with Vinyl Chlorosilanes (2021) In an effort to expand past vinylsilyl coupling partners, Xing-Zhong Shu and co-workers coupled chlorohydrosilanes with aryl bromides, aryl triflates, and cyclic alkenyl triflates (Scheme 467).643 For the aryl bromide and triflate system use of electron-rich 3,4,7,8-Mephen ligand was essential to obtaining high yields. Aryl triflates or bromides with electron-withdrawing or -donating groups were all cross-coupled, and primary amines, phenols, and ketal and THP protecting groups were well tolerated. A modified catalyst system enabled the coupling of vinyl triflates with chlorohydrosilanes. Kinetic experiments supported the intermediacy of an arylnickel(II) intermediate, and further stochiometric experiments indicated that this species is likely reduced to a nickel(I) before reacting with the hydrochlorosilane (Figure 48A). Cross-Coupling of Chlorohydrosilanes with Aryl and Alkenyl Bromides and Triflates (2022) (a) With Ni(OTf)2 (10 mol%), bpy (15 mol%), and Mn (2 equiv). (b) With Ni(dppe)Cl2 (10 mol%), 4,4’Mebpy (15 mol%) and Mn (2 equiv) at 0 °C. C–Ge Bond Forming Reactions XEC of chlorogermanes is less developed than the hydrogermylation of alkenes and the reaction of preformed organometallic reagents with chlorogermanes.644,645 While well-established, these methods require prefunctionalization of either the germanium reagent or the corresponding alkyl/alkenyl fragment. Previously reported cross-couplings of organogermanes required the formation of R3GeZnCl·2LiCl or utilized Grignard reagents as coupling partners.646 Taken together, the development of more direct couplings of chlorogermanes would be advantageous. Thus far, each report of C–Ge XEC has utilized a different ligand (Figure 49). Ligand types, along with coupling partner identity, will continue to grow as new reactions in this area develop. The proposed mechanisms are analogous to one of the C–Si XEC mechanisms (Figure 48A): initial oxidative addition of the carbon electrophile, reduction to a Ni(I) intermediate, oxidative addition of the chlorogermane, and reductive elimination. Ligands used in C–Ge bond-forming XEC reactions. Xing-Zhong Shu and colleagues developed the first XEC of chlorogermanes with aryl and vinyl (pseudo)halides (Scheme 468).647 The substrate scope of the transformation is broad, in analogy to their previous work with C–Si XEC (see section 8.1.1, Scheme 462 and Scheme 463),634 tolerating functionality such as organotin, organoboron, organosilicon, and a free phenol. A series of variably substituted tertiary chlorogermanes could be coupled, except for Ph3GeCl. In the presence of various Michael acceptors, no germanyl adducts were detected; moreover, radical cyclization probes resulted in uncyclized products. An arylnickel(II) complex was prepared, and with the addition of chlorogermane in the presence of manganese, cross-coupled product was formed; when manganese was omitted, no product was observed. Taken together, these data supported the hypothesis that a reduced arylnickel(II) species was potentially responsible for the oxidative addition of chlorogermane onto the nickel center. Ni-Catalyzed XEC of Chlorogermanes with Aryl and Vinyl (Pseudo)halides (2021) (a) With dtbbpy (12 mol%) as ligand. (b) With4,4′,4″-CO2Metpy (12 mol%) as ligand, Ge–Cl (1.5 equiv), and DMF at 30 °C. Soon thereafter, Xing-Zhong Shu and colleagues introduced alkyl bromides as efficient coupling partners to form C(sp3)–Ge bonds through XEC (Scheme 469).648 In contrast to their preceding studies (Scheme 468), bipyridine ligands performed superior to terpyridine ligands. Increased selectivity for the cross-coupled product was achieved at lower temperatures. While these conditions were specific for primary alkyl bromides, good functional group tolerance was observed (nitriles, aldehydes, phosphodiesters, and free alcohols). Additionally, the method was used to modify biologically active molecules such as D-biotin. Stochiometric studies supported the alkyl bromide reacting first with nickel(0) Ni-Catalyzed XEC of Chlorogermanes with Primary Alkyl Bromides (2022) Group 15 (N/P/Sb) Pnictogen electrophiles such as chlorophosphines and azides are commonly utilized in organic synthesis with appropriate carbon nucleophiles.649,650 This area would benefit from a wider array of carbon electrophiles as well as improved functional group compatibility. C–N Coupling An area which has remained relatively less explored in the field of XEC has been the development of reactions of N-electrophiles to form C–N bonds. This stems in part from the fact that amines are among the most abundant functional groups and are excellent nucleophiles for C–N bond-forming reactions. There are also relatively fewer formal N-electrophiles. However, azides and nitro species offer advantages over free amines and are easy to access. There are only a few reports, so the list of catalysts is expected to grow in the future (Figure 50). Ligands and precatalysts used in C–N bond forming XEC reactions. Konev, McTeague and Johannes at AstraZeneca reported the formation of diarylamines through a metallaphotoredox-catalyzed coupling of aryl iodides with arylazides (Scheme 470).651 Interestingly, unprotected anilines were tolerated, allowing for selective N-arylation. Competition studies between aryl azides and an analogous aniline revealed that (1) the azide-derived product was reacted preferentially, and (2) the aniline was also able to form product, indicating that the photochemical conditions could potentially oxidize any aniline species generated in situ, leading to product formation. The authors propose that N-coordination of the azide to the nickel center enables the single-electron transfer, extrusion of N2, and protonation of the nitrogen to form the amine product. The reaction was compatible with a number of heterocyclic azides and heteroaryl halides, while tolerating Bpin, ester, and sulfonamide functional groups. Preparation of Diarylamines via Nickel/Photoredox XEC of Aryl Azides with Aryl (Pseudo)Halides (2018) With aryl bromide Dong Xue and co-workers developed a photochemical, Ni-catalyzed C–N coupling of nitroarenes and aryl halides to form diarylamines through the use of a preformed (o-tolyl)NiII–Br precatalyst (Scheme 471).652 Previous reductive methods of forming diarylamines from nitroarenes required the use of boronic acids as nucleophilic coupling partners,653 but this method enables the cross-coupling of the two electrophiles without the need for reduction of the nitroarene or activation of the aryl halide. The complex proposed mechanism involves reduction of the nitroarene to a nitrosoarene that is proposed to react with an arylradical intermediate and a further reduction of the hydroxylamine. While this is borderline between XEC and formal XEC, we elected to include it as an example of an exciting direction for the field. Photochemical, Ni-Catalyzed C–N Coupling of Nitroarenes with Aryl Halides to Form Diarylamines (2021) With (dtbbpy)NiII(o-tolyl)Br (15 mol%) C–P Coupling Translation of XEC chemistry to the synthesis of C–P bonds has been achieved in many contexts, perhaps arising from the stability and convenience of chlorophosphines and the challenge of using phosphide nucleophiles (Figure 51). Indeed, many C–P XEC reactions were reported in the 1990s, predating the majority of analogous C–C bond-forming XECs. At the time of writing this review, a definitive mechanism for the cross-coupling between chlorophosphines and aryl or alkyl (pseudo)halides has not been agreed upon, but mechanistic work done by Budnikova has shed some light on the electrochemically driven reactions.654 It is understood that a (bpy)NiII(X2) species is reduced at the cathode and undergoes oxidative addition with the aryl halide to generate an (aryl)NiII(bpy)(X) species. From this intermediate, it is believed that there are two plausible mechanisms for product formation: 1) intermediate reduction of the (aryl)NiII(bpy)(X) to (aryl)NiI(bpy) allowing for oxidative addition of the chlorodiphenylphosphine to generate a (Ph2P)(aryl)NiIII(bpy)(X), from which reductive elimination of the aryl and phosphine yields product, or 2) chlorodiphenylphosphine reacts directly with the NiII intermediate via transmetalation, wherein (bpy)NiII(X2) is regenerated and Ar-PPh2 is formed. The plausible mechanisms are shown in Figure 51 and the relevant ligands are shown in Figure 52. Proposed mechanisms for the XEC of aryl (pseudo)halides with chlorophosphines. Ligands used in C–P XEC coupling reactions In 1997, Laneman and co-workers developed an efficient synthesis of tertiary phosphines via a Ni-catalyzed XEC of chlorodiphenylphosphine with benzylic halides, aryl halides, vinylic halides, and aryl sulfonates (Scheme 472).655Ortho-sterics were well tolerated for aryl substrates, and apart from free carboxylic acids, carbonyl containing moieties were coupled in productive yields. In general, triflate substrates afforded higher yields, as bromides resulted in large quantities of hydrodehalogenated byproducts. The synthetic utility of this method was illustrated in the preparation of (S)- BINAP without erosion of axial chirality. XEC of Chlorodiphenylphospine with Aryl Halides and Sulfonates to form Tertiary Phosphines (1997) Budnikova and co-workers developed an electrochemical method of forming tertiary phosphines via an electrochemically reduced Ni(bpy) complex (Scheme 473).656 The reactions were run in an undivided cell, with a magensium anode used for electron-rich aryl bromides, and a zinc anode used for electron-deficient ones. It was proposed that the reaction proceeds through a sequential oxidative addition mechanism, in which the aryl bromide reacts with the nickel center first followed by uptake of the chlorophosphine. A (bpy)Ni0(o-tolyl) complex was synthesized electrochemically, and with addition of chlorodiphenylphosphine, diphenyl-o-tolylphosphine and its oxide were isolated. In the reaction of the preformed nickeldiphenylphosphide complex, the addition of aryl bromide resulted in no product formation. The reported protocol could tolerate esters, nitriles, protected phenols, and efficiently coupled heteroaryl bromides. Electrochemical Coupling of (Hetero) Aryl Bromides with Phosphorus Chloride to Form Tertiary Phosphines (1999) (a) Zn anode was used. (b) Mg anode was used. (c) PhPCl2 was the starting material. Nédélec developed an electrochemical approach to access tertiary phosphines from aryl halides and phenyldichlorophosphine or diphenylchlorophosphine (Scheme 474).657 Both aryl bromides and heteroaryl chlorides were able to couple efficiently. In order to achieve the highest yields, the aryl bromide was added portionwise until a steady concentration of tertiary phosphine was detected via GC.).657 Both aryl bromides and heteroaryl chlorides were able to couple efficiently. In order to achieve the highest yields, the aryl halide was added portion-wise to the reaction mixture until a steady concentration of tertiary phosphine was detected via GC. The authors found that a magnesium anode was necessary to engage electron-neutral and electron-rich aryl halides, while electron-deficient aryl halides necessitated a zinc anode. When PCl3 was subjected to the reaction conditions, only a minimal amount of PPh3 was generated at the start of electrolysis. It was hypothesized that the PCl3 was much quicker to react with the zerovalent nickel species compared to aryl halides, resulting in inefficient coupling. Ni-Catalyzed, Electrochemical XEC of Mono- and Dichlorophenylphosphines with Aryl Halides (1999) Budnikova and co-workers further developed electrochemical conditions to functionalize white phosphorus (P4) with both aryl and alkyl halides (Scheme 475).658,659 Selective formation of the tertiary phosphine or its oxide could be controlled by the choice of anode or solvent. Mechanistic investigations illustrated that both NiII and Ni0 species could coordinate with P4, with the latter forming more stable complexes. However, under the reaction conditions, the authors propose that Ni0 initially reacts with the aryl or alkyl halide, and the oxidized nickel species is what enables the formation of the tertiary phosphines. Ni-Catalyzed, Electrochemical XEC of Alkyl and Aryl Halides with White Phosphorus (2002) (a) Zn anode was used in DMF. (b) Mg anode was used in DMF. (c) Al anode was used in MeCN, oxide formation likely occurs during isolation. Le Gall published a follow up on Nédélec’s electrochemical work with heterogeneous metallic reductants toward the synthesis of tertiary phosphines (Scheme 476).660 With zinc as the terminal reductant, the reaction proceeded efficiently in NMP at higher temperatures (110 °C). Notably, these XEC conditions could tolerate functional groups (such as ketones) that might not tolerate the use of carbon or phosphorus nucleophiles. However, the substituent position and electronics proved to have a major influence on the reaction profile. In the case of trifluoromethyl-bromobenzene, the meta- and para- versions coupled efficiently (86% and 75% yield, respectively), but the ortho-substituted version only resulted in a 30% yield. Additionally, aryl halides with electron-donating groups, such as para-methoxy, could easily form the corresponding tertiary phosphine oxide. Formation of Triarylphosphines via the XEC of Chlorodiphenylphosphine with Aryl Bromides (2003) Wai-Yeung Wong, Shuang-Feng Yin, Nobuaki Kambe, Renhua Qiu and colleagues reported the Ni-catalyzed XEC of bench stable chlorostibines with aryl halides (Scheme 477).661 A mixed phosphine ligand system of dppe and BINAP was utilized, and LiI boosted reaction efficiency. Electronically diverse aryl iodides and bromides, as well as activated aryl chlorides were all competent coupling partners. Only primary alkyl bromides and iodides could be utilized, as secondary alkyl halides gave no yield. Stibines functionalized with natural product and pharmaceutical cores could be obtained in high yields. The resulting stibine products were further functionalized in high chemoselectivity in a downstream palladium cross coupling sequence, affording valuable bi- and triarylated motifs. Ultimately, the authors propose three potential mechanisms, one of which is analogous to the sequential oxidative addition (Figure 21A). However, stochiometric studies indicated that in situ generated distibine intermediates could be competent reaction partners. Thus, the authors propose that diverging cross coupling mechanisms involving a key transmetalation event between Ni(II) species with distibines could also be invoked. Ni-Catalyzed Cross-Electrophile Coupling of Chlorostibines with Aryl and Alkyl Halides (2022) (a) With X = I, (b) With X = Br, (c) With X = Cl. Group 16 (S/Se) The development of new methodologies to form carbon–chalcogen bonds has been focused on two major points; first, the development of new thiolating agents which are less nucleophilic in nature than those previously reported using thiols and disulfides, and second, the synthesis of effective and odorless reagents to form said carbon–chalcogen bonds. Although RS– and RSe– are excellent nucleophiles, RS• and RSe• are easily accessible and complementary. As shown by some of the reports below, the parallel selenylatation is often accessible using the same conditions and similar activating reagents that are used in the thiolation protocols. Interestingly, these new reagents are not limited to being redox active, but in some instances, have been proposed to form sulfur radicals to engage in productive cross-coupling. Mechanistic experiments done by Shun-Yi Wang and Shun-Jun Ji’s groups showed that in the presence of a nickel catalyst and a metal powder reductant, sulfur and selenium sulfate groups can dimerize to form disulfides. When the nickel was removed, manganese powder alone could not activate the reagents, indicating that these S/Se–sulfate groups are likely redox active. As such, it is proposed that these groups (and other redox active groups), when reacted with an alkyl radical precursor, undergo an oxidative addition/radical capture mechanism (Figure 53).662 The reports in this section point to bipyridine and phenanthroline-based ligands being the best for C–S coupling reactions, but there is room to discover catalyst and ligand combinations that could introduce more secondary and tertiary radical precursors into the C–S coupling regime (Figure 54). Thiolation of aryl halides via a thiosulfonate or analogous redox active group. Ligands used in C–S and C–Se bond forming XEC reactions. Included in their report of the Ni-catalyzed C–S coupling of aryl iodides and thiols, Yu Peng and co-workers investigated thioacetates as stable surrogates for intramolecular C–S coupling with aryl iodides to form saturated heterocycles (Scheme 478).663 While this method displayed a small scope, the reaction could be run at gram scale at lower catalyst loading, (5 mol% NiCl2 at 1 mmol scale vs 10 mol% NiCl2 at 2.4 g scale) highlighting the practical advantages of this method. Nickel-Mediated, Intramolecular C–S Coupling of Thioacetates with Aryl Iodides (2013) NiCl2 (10 mol%), bpy (20 mol%), Zn (0.5 equiv), run at 2.4 g scale. The Shun-Yi Wang and Shun-Jun Ji groups developed a Ni-catalyzed, thiolation and selenylation of unactivated alkyl bromides, by using thio- and selenosulfonates as redox active electrophiles (Scheme 479).662 Bipyridine ligands with flanking 6,6′-methyl groups resulted in the highest yield. The reaction proved to be chemoselective, with alcohols, aldehydes, and alkyl borates tolerated by the system. Selenylation was achievable with similar conditions as the thiolation protocol. Ni-Catalyzed Thiolation and Selenylation of Unactivated Alkyl Bromides (2018) (a) With Alkyl-Br (1.1 equiv), benzenesulfonoselenoates (1 equiv), NiBr2 (5 mol%), neocuproine (7.5 mol%), Mn (1.5 equiv), DMF. (b) DMF/MeCN (2:3 v/v) was used instead of DMF. Shortly after, Shun-Yi Wang and Shun-Jun Ji published the Ni-catalyzed ring opening and cross-coupling of cyclobutanone oxime esters with thio- and selenylthiosulfonates to form C(sp3)–S and C(sp3)–Se bonds (Scheme 480).664 The cyclobutanone O-acyl oxime is proposed to be reduced via SET to generate an N-centered radical that undergoes β-scission to form a γ-cyanoalkyl radical. This can then be captured by the nickel thiolate intermediate and undergo reductive elimination to form the rearranged sulfide product. Ni-Catalyzed Thiolation and Selenylation of Cyclobutanone Oxime Esters with Thiosulfonate or Seleniumsulfonates (2019) At 60 °C. Yi Wang and co-workers reported the use of redox active benzimidazolium sulfonamides as convenient thiolating reagents in the XEC with alkyl, vinyl, aryl, and alkynyl halides, to form C–S bonds (Scheme 481).665 The reagents are made in one step from sulfonyl chlorides, benzimidazole, and methyl triflate. These salts are reduced by PPh3 to generate an R-S-[N+] sulfonamide that forms an S-centered radical, which is then captured by the nickel catalyst. The use of this benzimidazolium sulfonamide avoids the formation of disulfide side-products, which is common from the direct reduction of sulfonyl chloride. The method can form C(sp)–S, C(sp2)–S, and C(sp3)–S bonds with very little modification to the optimized reaction conditions. The reaction is tolerant of esters, alkyl Bpin, and terminal alkenes. XEC of Redox Active Benzimidazolium Sulfonamides with Alkyl, Vinyl, Alkynyl, And Aryl Halides (2020) With 4-(trifluoromethyl)pyridine (20 mol%) as ligand in THF. The Ackermann group drove the XEC of alkyl bromides with thiosulfonates with electrochemistry (Scheme 482).666 The reaction was run with a magnesium anode and nickel foam cathode under constant current conditions. The reaction was run in a commercial electrochemical instrument with only slightly diminished yields. Aryl, benzylic, and secondary thiosulfonates were all able to couple efficiently, with no obvious electronic preference of the substitution on the aryls. However, except for one secondary alkyl bromide example, alkyl bromide coupling partners were limited to primary alkyl bromides. Ni-Catalyzed, Electrochemical Thiolation by the XEC of Alkyl Bromides with Thiosulfonates to Form C(sp3)–S Bonds (2021) Shun-Yi Wang and Lutz Ackermann developed a method for accessing unsymmetric disulfides via the cross-coupling of tetrasulfides with primary alkyl bromides (Scheme 483).667 The tetrasulfides are proposed to regioselectively generate an (R2-S3)Ni(S-R2) oxidative addition complex (Figure 55). This complex is able to capture alkyl radicals, forming a trisulfide intermediate (R1-S3-R2) upon reductive elimination from the nickel center. The trisulfide is proposed to be redox active as well, forming a new (R1-S2)Ni(S-R2) oxidative addition complex on the nickel. XRD characterizations determined that the formation of S8 and other sulfur polyanions resulted when a sulfur atom was extruded by the nickel center. Following the extrusion of the sulfur atom, the disulfide product is formed by reductive elimination from the nickel. The formation of a redox active, trisulfide species was supported via Raman frequency measurements of a synthesized trisulfide reagent subjected to standard reactions conditions. Raman frequencies for the trisulfide disappeared over time, and signals for the disulfide product appeared, indicating that the trisulfide intermediate was most likely consumed during the course of the reaction. The protocol was compatible with free −OH, −NH, and phosphoester functional groups. Formation of Unsymmetrical Disulfides via the Ni-Catalyzed XEC of Alkyl Bromides with Alkyl and Aryl Tetrasulfides (2022) Mechanism for the formation of unsymmetrical disulfides via the cross-coupling of tetrasulfides with alkyl radicals Xinxin Shao and colleagues developed a new electrophilic sulfur reagent, N-thiophthalimides, for XEC with aryl halides (Scheme 484).668 These reagents are formed via the combination of an N-(chlorosulfenyl)phthalimide intermediate, and an organozinc reagent, resulting in the alkyl or aryl N-thiophthalimide reagent. This approach reports an attractive catalyst loading of only 0.5 mol%, which is relatively low for XEC reactions of any type. With respect to the N-thiophthalimide starting material, functional groups were limited to those that could tolerate organozinc intermediates, but the cross-coupling protocol itself tolerated aldehydes, esters, and pinacol boranes. Ni-Catalyzed XEC of Aryl, Vinyl, and Alkynal Halides with N-Thiophthalimides (2022) (a) With 2 equiv N-thiophthalimide, NiCl2(PPh3)2 (5 mol%), phen (10 mol%), 3 equiv Zn in DMFat 120 °C. (b) N-Thiophthalimide (1.2 equiv), NiBr2 (2.5 mol%), phen (5 mol%), 2 equiv NaI, 3 equiv Zn in DMF at 80 °C. Xinxin Shao and Ying Bai reported that N-sulfanylsuccinamides could be used in place of N-sulfanylphthalimides under nearly the same conditions (Scheme 484 vs Scheme 485).669 The reaction primarily utilized aryl iodides, but in some cases, aryl bromides could be utilized. Aldehydes, aryl Bpin, and free -NH heterocycles were tolerated with the protocol. Ni-Catalyzed XEC of Organo-Iodides With N-Thioimides to Generate C(sp2)–S Bonds (2023) Outlook and Challenges for the Field Scope and Selectivity While avoiding the synthesis of carbon nucleophiles increases the functional group tolerance of XEC reactions, there are still limitations in what electrophiles can be successfully coupled. For example, functional groups that are easily reduced, such as nitro groups or azides, are often not tolerated. In addition, coupling partners that can undergo ring opening, such as isoxazoles, represent general challenges in the field.670 In contrast to conventional cross-coupling, where one coupling partner favors oxidative addition and the other transmetalation, XEC can suffer from poor cross-selectivity. First, even in cases where differential activation is robust (e.g., polar oxidative addition of aryl halides vs radical activation of alkyl halides), high selectivity is contingent on successfully matching rates of activation of both coupling partners. In practice this means that coupling electrophiles of very different reactivity is difficult (e.g., aryl chlorides with alkyl iodides). Methods to match the reactivity of the larger substrate pools are still required (e.g., denitrative coupling of amines with aryl chlorides). In general, coupling partners that are slower to react, such as organochlorides, are underreported as competent coupling partners, compared to more reactive organobromides and -iodides, despite higher commercial availability. Another selectivity challenge occurs when the electrophiles react in the same way by the same mechanism. In this case, cross-selectivity is not possible. If the electrophiles have similar rates of reactivity, statistical mixtures are observed; if their reactivity is very different, then primarily homodimers are observed. While this can be addressed by manipulating concentrations of reagents (excess of one partner and/or slow addition), a more general approach is the development of catalysts or combinations of catalysts that enable mechanistic differentiation of the substrates (e.g., aryl tosylates and aryl triflates can be differentiated by Pd and Ni multimetallic catalysis).20 Another approach well-suited to C(sp3)–C(sp3) bond formation is utilizing the different reactivities of two radical intermediates to engender cross-selectivity. As formulated in the “persistent radical effect”: as long as one radical is slow to self-couple compared to cross-coupling and both radicals are generated at about the same rate, this can result in high selectivity.112 Metals can assist with this “sorting” process by stabilizing one of the radical intermediates and assisting in the bond-forming steps.52,112,671 While exciting progress has been made using these strategies, more advances in this area are needed. Few XEC methods have focused upon coupling reactions to form highly sterically hindered bonds. This problem is especially challenging for XEC because hindered substrates are slower to activate, adding the problems of matching reactivity to those of the bond-forming step. However, with all of these challenges, it is important to note that many XEC reactions have been reported with nearly perfect cross-selectivity and high yields, even with a 1:1 ratio of starting materials. In addition, stepwise stoichiometric reactions of arylnickel(II)672,673 and alkylnickel(II)674 complexes demonstrate that high yields in the radical-capture and bond-forming steps should be possible in nearly all cases. We recently reported on a new nonradical method to access alkylnickel(II) intermediates that should provide new approaches to cross-selective C(sp3)–C(sp3) reactions.675 It is our view that, with sufficient further study and understanding, XEC reactions can be as cross-selective as the best cross-couplings of nucleophiles with electrophiles. Ligand Design and Discovery While there has been progress in ligand design in recent years, ligand choice remains limited to a relatively small range of privileged classes (see Figures 6, 7, and 8). The discovery of the pyridyl-2-carboxamidine structure (e.g., PyCam, BpyCam, and PyBCam) and its broad success offers promise for future ligand discovery.32 More recently, work into Di(2-picolyl)amines (DPAs) shows promise as a robust class for further XEC reactions.234 Ongoing computational studies in our group and others will undoubtedly introduce a broader range of ligand classes compatible with XEC reactions of interest.161,676 In general, the field would benefit from efforts in mechanism-guided ligand design, such as the recent dumbbell ligands of Sawamura.230 Reductants, Photochemistry, and Electrochemistry The most common reductants used in XEC are metal powders, most frequently Zn0 or Mn0, which are inexpensive, easy to handle and store. However, with translation to larger scale (>100 g), there are concerns regarding disposal of resulting metal salts.34,677 In addition, heterogeneous reductants on larger scale can exhibit mass-transfer limitations, which can result in irreproducible kinetics.47,678,679 Variations in the form of the heterogeneous reductant (e.g., zinc powder vs zinc flake) can result in differing rates of reactivity which can be difficult to predict. The variability in metal powders is complicated because characterization usually requires testing them out in the reaction of interest. In addition, translation of heterogeneous reactions to smaller scale (e.g., HTE reaction setups) often requires additional technologies, such as ChemBeads, to allow for reproducible dosing and efficient stirring.115,226,227 Organic reductants offer an attractive alternative to heterogeneous reductants because of easier dosing and scaling. While the most developed, the use of tetrakis(amino)ethylenes has been limited to high prices (TDAE is $6170/mol while Zn is $7/mol and Mn is $12/mol from Sigma-Aldrich) or a lack of commercial availability. The use of bis(pinacolato)diboron (B2pin2) with added base is lower cost (B2pin2 is $670/mol) and is promising for the XEC of alkyl and aryl halides.52−54 Further study of these two systems, simplified syntheses of tetrakis(amino)ethylenes, as well as the discovery of novel homogeneous reductants, are all promising future directions. Despite these current issues, the advantages of homogeneous reactions make it is easy to see a near future when homogeneous reductant prices and availability have improved to the point where they will be the default choice in XEC. Photochemical applications of XEC bypass the need for stoichiometric amounts of metal reductants yet often still involve the use of expensive Ir photocatalysts.680 While Ir is unlikely to become more abundant, research in organic and main-group alternatives (e.g., 4-CzIPN,681 benzophenones,253 semiconductor QDs682) has recently gained momentum. Given the growing confidence of organic chemists in utilizing photochemistry on both large and small scale, the ability to tune reactivity with light intensity and wavelength, and the affinity of photochemistry for radical generation process, it is also easy to envision a future where photochemically driven XEC is among the first strategies researchers choose to try. Finally, electrochemistry is a natural fit for XEC because the reduction and oxidation reactions are separated in space, especially when a divided cell is used. Like photochemistry, electrochemistry offers many ways to tune the reaction (voltage, electrode materials, cell design) and can be adapted to flow chemistry. While early work has relied on sacrificial anodes (still generating metal salt waste), even this approach has advantages in the ability to tune reduction potential and avoid handling metal powders (and using plates and rods instead). Further, the reductive XEC chemistry can, in theory, be combined with nearly any oxidative reaction.683 XEC driven by simple oxidation processes perfected in fuel cells (H2 oxidation to generate protons, water oxidation to generate O2) would produce benign side products.684 Finally, electroorganic synthesis on large scale offers the opportunity to decarbonize large-scale chemical synthesis. Stereocontrol Enantioconvergent XEC has seen the most development and already offers an attractive alternative to the use of carbon nucleophiles.685 The palate of racemic electrophiles compatible with enantioconvergent XEC remains more limited than for enantioconvergent cross-coupling, and more work is needed. This is especially the case in ligand design, and a better understanding of the mechanisms of these reactions is needed. Enantiospecific cross-electrophile coupling complements enantioconvergent couplings by converting easily accessible enantioenriched molecules into challenging ones.686 This area is scarcely developed, perhaps because most XEC reactions of alkyl electrophiles proceed by alkyl radicals that are a better fit for enantioconvergent coupling. Promising results with allylic and benzylic alcohols should be further investigated, but additional mechanistic strategies are needed in this area. Finally, derivatization of chiral pool materials by XEC has already proven exciting, even at this early stage. Peripheral derivatization of amino acids to make various unnatural amino acids and deoxygenative coupling of sugars are two examples.270,287 Natural products are usually more oxidized than petrochemical feedstocks. Compared to deoxygenation approaches, deoxygenative C–C bond formation offers new ways to utilize these abundant feedstocks without throwing away their stereochemical information. Mechanistic Understanding While there are a variety of coupling types reported, the field has largely coalesced on a few mechanisms that share characteristics steps: (1) C(sp2) electrophiles are activated via a nonradical mechanism to form an (L)NiII species, and the C(sp3) electrophiles are converted to an alkyl radical intermediate. (2) The alkyl species interacts with the (L)NiII species to form a proposed (L)NiIII species that rapidly undergoes reductive elimination to furnish the desired cross-product. (3) The Ni catalyst is rapidly reduced by an external reductant to turn over the catalytic cycle. The mechanistic understanding is most developed in the area of C(sp2)–C(sp3) bond formation, but even here many key aspects are not well understood. These details will matter immensely to perfecting XEC chemistry and enabling the coupling of recalcitrant or complex electrophiles. The understanding of C(sp3)–C(sp3) XEC mechanisms remains underdeveloped compared to C(sp2)–C(sp3) XEC, owing to challenges in isolating and studying alkylmetal intermediates, the wide differences in reactivity observed depending on substitution (e.g., 1°, 2°, 3°), and the influence of adjacent functional groups (e.g., allylic, benzylic, α-carbonyl). Further, all but the most trivial of C(sp3)–C(sp3) bond-forming reactions must account for stereochemical control, which is also a challenge for XEC in general. It is our view that a host of strategies will be required to address these many different requirements, but that the field is poised for rapid growth. No More Nucleophiles? Cross-electrophile coupling is now a formidable force in the field of organic chemistry, experiencing near exponential growth over the past decade, and it will undoubtedly continue to expand in the future. For certain types of bond formations, XEC is already supplanting cross-coupling approaches.249 With this review as a springboard, we expect that these limitations will be addressed by the global XEC community in due course, further advancing the field. Ask Your Own Questions About the Field While writing this review, we collected a variety of data from our references into a spreadsheet in order to organize such a large project. This ended up amounting to about 69 000 data points. While we did not have the resources to extract a high level of detail (such as substrates or all details of conditions), we have already found this data set to be of enormous value for answering questions about XEC chemistry. The plots throughout the review were all generated with relatively little further effort from this spreadsheet. We have included this data set as Supporting Information with the hope that other researchers find it useful and fun. We only ask that when you use this data in a paper that you reference this review as the source.