Tailored chiral phosphoramidites support highly enantioselective Pd catalysts for asymmetric aminoalkylative amination Authors: Suchen Zou, Zeyu Zhao, Guoqing Yang, Hanmin Huang Published: 2024 ABSTRACT AbstractEven though tuning electronic effect of chiral ligands has proven to be a promising method for designing efficient catalysts, the potential to achieve highly selective reactions by this strategy remains largely unexplored. Here, we report a palladium-catalyzed enantioselective ring-closing aminoalkylative amination of aminoenynes enabled by rationally tuning the remote electronic property of 1,1’-binaphthol-derived phosphoramidites. With a tailored 6,6’-CN-substituted 1,1’-binaphthol-derived phosphoramidite as a ligand, a broad range of aromatic amines are compatible with this reaction, allowing the efficient synthesis of a series of enantioenriched exocyclic allenylamines bearing saturated N-heterocycles with up to >99% enantiomeric excess. Remarkably, a one-pot aminoalkylative amination/hydroamination process for the rapid synthesis of chiral spirodiamines promoted by this catalytic system is also established. Detailed mechanistic studies provide solid evidence to support that the remote electronic character of these chiral ligands can efficiently tuning the enantioselectivity by altering the length of the allylic C-Pd bond of the key catalytic intermediate.Subject terms: Asymmetric catalysis, Synthetic chemistry methodology Introduction Transition metal-catalyzed asymmetric synthesis is one of the most efficient methods for accessing chiral compounds, and it has found extensive applications in natural product synthesis, medicinal chemistry, and other areas1–3. The designing of efficient chiral ligands and the development of new reactions, which can enrich the toolbox of asymmetric synthesis, are core research areas in modern synthetic chemistry. By introducing steric hindrance groups into the coordination center to regulate the chiral ligand’s steric environment4,5, a primary strategy for catalyst design, chemists have achieved numerous highly efficient reactions. On the other hand, the remote electronic modulation under appropriate steric hindrance has been demonstrated to be another vital handle on catalyst design. In a seminal report in 1991, Jacobsen and co-workers unveiled a strong linear free energy relationship between the enantiomeric excess (ee) of epoxidation products and the electronic property of the para-substituents of (salen)-Mn catalysts, demonstrating that introducing strong electron-donating substituents could ensure excellent ee values (Fig. 1a)6,7. Thereafter, the importance of remote electronic effects in synthetic chemistry, such as asymmetric epoxidation, hydrofunctionalization of alkene, hydrogen bond-catalyzed reaction, site-selective acylation and others8–13, has been increasingly appreciated. Nevertheless, the potential applications of remote electronic effect in Pd-catalyzed asymmetric transformations have remained largely unexplored14,15, partly because the known effective chiral catalysts are not well-suited to remote electronic tuning either synthetically or structurally. Pd-catalyzed enantioselective carboamination of unactivated enynes. a Ligand remote electronic tuning for asymmetric metal catalysis. b The current state-of-the-art of palladium-catalyzed asymmetric hydro/carboamination of enynes. c Tailored chiral phosphoramidite enables palladium-catalyzed asymmetric ring-closing aminoalkylative amination of aminoenynes. Among numerous privileged chiral ligands, 1,1’-binaphthol (BINOL)-derived phosphoramidites are one of the most widely used ligands in transition metal-catalyzed asymmetric reactions16. In addition to enabling the adjustment of the steric demand of the catalyst at the 3,3’-positions, the BINOL scaffold also provides us an opportunity to systematically turn the remote electronic feature by introducing different substituents at 6,6’-positions17–19. For instance, by introducing –CF3 into the 6,6’-positions of BINOL, Kobayashi and co-workers achieved a highly enantioselective Mannich-type reaction of silyl enol ethers with aldimines, catalyzed by (6,6’-(CF3)2BINOL)-Zr, with a high level of TON (Fig. 1a)20. Despite these advances, most BINOL-derived phosphoramidites designed for Pd-catalyzed reactions relied on tuning the substituents at the 3,3’-positions of the BINOL-skeleton, rendering scant attention paid to achieving highly selective reactions by remote electronic tuning5,16. Hence, the investigation of the remote electronic effect in Pd-catalyzed asymmetric transformation by taking advantage of the BINOL-derived phosphoramidites holds great significance. In line with our continuous interest in designing chiral ligands21,22 and developing asymmetric reactions based on aminoalkylation chemistry23–27 herein, we report a Pd-catalyzed highly enantioselective ring-closing aminoalkylative amination of enynes, which was enabled by a remote –CN group decorated phosphoramidite ligand (Fig. 1). Chiral allenes are an important class of molecules that not only exist in numerous natural and biologically important synthetic molecules28 but also serve as useful building blocks for the efficient synthesis of diverse intricate molecules29–31. Specifically, densely functionalized 2,3-allenylamines are remarkably versatile due to the incorporation of two important transformable functional groups (allene and amine)32–34, and they have found particularly elegant applications in the synthesis of natural products35–37. Accordingly, there are enduring endeavors to devise efficient methods for synthesizing these targets38–49. Of the many sophisticated catalytic methods, the Pd-catalyzed asymmetric two-component 1,4-hydro/carboamination of unactivated enynes constitutes the most atom- and step-economic routes for the rapid assembly of chiral allenylamines (Fig. 1b). However, relevant reports on this area remain scarce27,50,51. Furthermore, while the documented 1,4-functionalization of enynes can yield a range of enantioenriched allenylamines, they typically require the use of secondary alkylamines50 or secondary alkylamine-derived aminals27 to achieve acceptable enantioselectivities ((39–91% ee),50 (67–93% ee)27). Aromatic amines, on the other hand, are omnipresent in natural products and bioactive compounds52. These compounds often exhibit enhanced stability, and their aryl groups can influence reactivity and selectivity in synthetic transformations. Expanding the nucleophiles from alkylamines to aromatic amines could further advance this field by enabling the synthesis of more complex and potentially bioactive molecules. However, extending these methods to the less nucleophilic aromatic amines remains a significant challenge. Recently, we have disclosed a more atom-economic and environmentally benign three-component reaction towards racemic allenylamines27, where the putative aminoalkyl cyclopalladated complex B was produced from the N,O-acetals that were generated in situ via condensation of aminoenynes and aldehydes, with H2O as the sole by-product (Fig. 1c). In light of the above-mentioned challenges and with this efficient three-component protocol in hand, we embarked on developing a more practical asymmetric variant to be compatible with aromatic amines. Mechanistically, the asymmetric allylic amination of allene acetates46 and the asymmetric hydroamination of enynes,50 which share the same vinyl η3-allylic palladium A,53 proceeded under the control of Curtin-Hammett principle with the amination of palladium-complex A being the stereo-determining step. As such, we surmised that the rationally designed chiral ligands, by fine-tuning their electronic properties, would potentially facilitate the desired carboamination with aromatic amines. If achievable, this protocol would offer an expedient approach to chiral exocyclic allenylamines bearing a saturated N-heterocycle (Fig. 1c). Moreover, primary aromatic amines may undergo a one-pot carboamination/hydroamination reaction, hopefully enabling the straightforward synthesis of chiral spirodiamines featured in many biologically active compounds54. These chiral spirocyclic structures are currently not easily accessible through other strategies54–56. Results Preliminary results Initially, the reaction of N-benzylhept-6-en-4-yn-1-amine 1a, polyformaldehyde 2a, and N-methylaniline 3a was selected as the model system. The chiral ligand screening was performed in CH2Cl2 at −10 °C with 2.5 mol% of [Pd(π-cinnamyl)Cl]2 as catalyst precursor and 8 mol% of AgClO4 as an additive. Employing the common chiral ligands utilized in Pd-catalyzed asymmetric reaction achieved limited success (for the details, see Supplementary Table 1). After many trials, it turned out that the reaction could proceed smoothly with phosphoramidite L1, previously reported in our previous work27, as the chiral ligand and the target product 4 were obtained in 75% yield with 59% ee (Fig. 2a). To our delight, the chiral product 4 was obtained in 79% yield with 76% ee by lowering the reaction temperature to −30 °C. Preliminary results and mechanistic investigations. a Preliminary results with phosphoramidite L1 as the ligand. b Kinetic analysis. c Hammett plot for the enantiomeric ratio of products using para-substituted anilines. d Experiments designed to identify the potential product inhibition or catalyst deactivation. Mechanistic investigations and reaction optimization With these preliminary results in hand, we next sought to investigate the reaction mechanism, which may, in turn, guide the optimization of reaction conditions. The kinetic studies were carried out based on the initial reaction rate and demonstrated first-order dependence on the concentrations of the palladium catalyst, isolated N,O-acetal, and N-methyl aniline species (Fig. 2b). These results suggested that these three species were involved in the turnover-limiting step. Previous research has shown that electron-rich alkyl amines exhibit higher enantioselectivity compared to less nucleophilic aromatic amines50. This finding led us to hypothesize that the nucleophilicity of the nitrogen nucleophile could directly impact the stereoselectivity of the reaction. To this end, we used 1a and formaldehyde 2a as the standard substrates to react with a series of N-methyl anilines bearing different para-substituents under Pd/L1 catalysis at −30 °C (Fig. 2c). The experimental results indicated that the ee value of the product increased with the increase of nucleophilicity of aromatic amine. Moreover, a linear free-energy relationship with good correlation (R2 = 0.95) was observed in a plot of lg(er) against σp. The negative slope (ρ = −0.69) indicates that ee was highly sensitive to the nucleophilicity of the substrates. Collectively, these results suggest that the amination of vinyl η3-allylpalladium complex C might be the turnover-limiting and stereo-determining step (Fig. 1c). In addition to these experiments, we investigated whether catalyst deactivation or product inhibition existed in this reaction. Firstly, we conducted a same-excess experiment (Fig. 2d, entries 1 and 2). Based on the first-order kinetic results from the initial rate experiments, we performed data fitting using variable time normalization analysis57 (Figs. 2d-1, inset) and found that the plot fits well at lower conversions (around 20%). However, lower normalized rates were observed for lower catalyst loadings in the later stages of the reaction, suggesting potential product inhibition or catalyst deactivation. An additional control experiment with the product as an additive was performed (Fig. 2d, entries 1 and 3). The results showed that adding 25% of the product led to a decrease in the initial reaction rate (Fig. 2d-2), indicating that the reaction suffers from product inhibition. This inhibition may be caused by the coordination of the allene to the low-valent palladium species58 (for the proposed reaction mechanism, see Supplementary Fig 21). Therefore, it is also important to ensure that the catalyst remains active throughout the reaction during the optimization process. Encouraged by these results, we envisioned that improving the electrophilicity of vinyl η3-allylic palladium intermediate by minimizing the electron-donating ability of ligands could improve the catalytic efficiency and lead to higher enantioselectivity. Modification of the phosphoramidite ligand L1 was then conducted to improve the performance of the asymmetric catalytic system. As shown in Fig. 3a, variation of the chiral amine unit of the ligand L1 revealed that the more electron-rich the ligand used, the lower the enantioselectivity of the products was observed, whereas the yield remained unaffected (Fig. 3a, L1–L4). Inspired by these and our previous results27 that the introduction of substituents at the 3,3’-position of the chiral BINOL-framework resulted in a significant decrease in reaction efficiency, we turned to modify the ligand L1 with different substituents at the 6,6’-position of the BINOL-skeleton. This allows for tuning the remote electronic properties of the ligand without altering its steric hindrance. Along this line, five new phosphoramidite ligands (L5–L9) with different substituents, including –tBu, –Cl, –Br, –CO2Me, and –CF3 were successfully prepared. The structure of ligand L6 was characterized by X-ray crystallography analysis. As expected, the ee value of the product gradually increased along with the decrease of the electron-donation ability of the ligand (Fig. 3a, L5–L9), and 91% ee was obtained with L9 as the ligand. Bolstered by these promising results, we next synthesized a more electron-deficient ligand L10 bearing—CN substituent at the 6,6’-position of the BINOL-skeleton and investigated its catalytic performance. As expected, the corresponding product 4 was obtained in good yield (78%) with excellent ee value (97%). Further screening of other parameters with L10 as the ligand indicates that the current reaction conditions are optimal (for details, see Supplementary Tables 8 and 9). Modification and effect of ligands. a Ligand effect on reaction efficiency. b Relationship between the remote electronic effect of substituents and ee values. c The nonlinear effect study. d Ligand effect on the reaction rate. e X-ray structure of Pd(allyl)L*Cl complexes. aConditions: 1a (0.3 mmol), 2a (0.45 mmol), 3a (0.45 mmol), [Pd(π-cinnamyl)Cl]2 (2.5 mol%), AgClO4 (8 mol%), L (11 mol%), CH2Cl2 (1.5 mL), −30 °C, 24 h, isolated yield. Investigations on ligand electronic effect During the above ligand screening process, we observed an intriguing relationship between the enantioselectivity of product 4 and the σp parameter of the substituents at the C-6 position of the ligand (Fig. 3b)59. A linear free-energy relationship with good correlation (R2 = 0.92) was observed in a plot of lg(er) against σp. The positive slope (ρ = 1.35) indicated that the ee was highly sensitive to the remote electronic nature of the ligand used here. To probe the electronic effect and to deeply understand the behavior of L10 in controlling the enantioselectivity, a series of experiments were conducted. A non-linear effect experiment was conducted and showed a linear relationship, indicating that the palladium-to-ligand ratio in the stereo-determining step is most likely 1:1 (Fig. 3c). The reaction rates were compared using different ligands at room temperature. As shown in Fig. 3d, reactions with ligands bearing electron-withdrawing groups exhibited a faster rate compared to those with electron-donating groups, with the reaction rate order as follows: L10 > L6 > L5. According to previous reports60,61, electron-deficient ligands facilitate the reductive elimination step from higher oxidation state metals to lower oxidation states. Thus, by combining the results from the non-linear effect experiments and kinetics results, we tentatively conclude that the allylic substitution process from Pd(II) to Pd(0) is most likely to be the turnover-limiting step, with only monomeric palladium catalysts involved in this process. DOSY NMR of the cationic Pd/L10 complex revealed that a single complex forms when palladium and the ligand are combined in a 1:1 ratio, with no oligomeric allyl species detected, which might further support our hypothesis (for details, see Supplementary Table 12). During the optimization of the reaction conditions, we observed that varying the ratio of Pd/L10 from 1:2 to 1:1 had no influence on the enantioselectivities of this reaction, but it conspicuously attenuated the reactivity (for details, see Supplementary Table 8). Given the presence of catalyst deactivation and product inhibition in this reaction (Fig. 2d), this result suggests that an appropriate excess of ligand would mitigate catalyst deactivation62. Additionally, we performed DFT calculations to investigate the effect of substituents on the electron density of the palladium center. The results indicated that, in the allylic cationic palladium complex, the electron density at the palladium center is directly influenced by the remote substituents of the ligand, with electron-withdrawing groups rendering the palladium center more electron-deficient (for details, see Supplementary Table 13). Accordingly, we assumed that the η3-allylic moiety of the complex would be closer to the more electron-deficient palladium center, which thus enhances its electrophilicity to facilitate the desired reaction. To validate this hypothesis, three new palladium–phosphoramidite complexes, Pd(allyl)L5Cl (Pd-1), Pd(allyl)L6Cl (Pd-2) and Pd(allyl)L10Cl (Pd-3) were prepared and characterized by X-ray crystallography analysis (Fig. 3e). The X-ray structures of [Pd(allyl)L*Cl] illustrated the order of bond lengths of allylic-C-Pd at the trans-position of P-Pd as follows: Pd-1 (2.203 Å) > Pd-2 (2.187 Å) > Pd-3 (2.177 Å). These results confirmed that reducing the electron-donating ability of ligands could increase the electrophilicity of vinyl η3-allylic palladium species, thereby increasing the reaction rate. Moreover, the allyl group closer to the palladium center can amplify the discriminating interaction between the diastereotopic vinyl η3-allylic palladium complex and amine, thus improving the kinetic selectivity at the amination step and resulting in higher levels of enantioselectivity. Substrate scope exploration With this catalytic system in hand, we set out to investigate the substrate generality of this Pd-catalyzed three-component ring-closing reaction. First, the influence of various substituents on the phenyl group of N-methyl anilines was explored (Fig. 4A). To our delight, both electron-withdrawing group (–Cl, –Br, –CO2Me) and -donating groups (–OMe, –Me) were all compatible with this reaction and afforded the desired products (4-12) in 65–85% yields with 75–99% ee values. Notably, with the catalyst loading reduced to 1 mol%, the desired product 4 could still be obtained in 67% isolated yield with 94% ee, demonstrating the robustness and efficiency of this protocol. Moreover, the electronic nature of the phenyl ring of the N-methylanilines had a strong influence on the enantioselectivities. The N-methylanilines bearing mono-halide furnished the corresponding chiral allenes (7 and 8) in good yields with excellent ee. However, the reaction with strong electron-withdrawing group substituted N-methylanilines, such as ester or di-chlorine substituted substrates, provided lower enantioselectivities, while the yield remained unaffected (10 and 11). Compared with the results of the substrates bearing an electron-withdrawing group, the presence of an electron-donating group led to good yields with excellent enantioselectivities (5, 6, 9, and 12). Furthermore, N-methyl naphthylamine showed good compatibility to produce the corresponding product 13 in 74% yield with 96% ee. In addition to N-methylanilines, other N-substituted anilines, such as ethyl, benzyl, allyl, and siloxane are amenable to this reaction, delivering the target product (14-17) with high to excellent ee values. For aniline tethered with a cyano group, a good yield was obtained (18) but with a lower ee value, which might be ascribed to its increased steric hindrance and potential coordination ability with the catalyst. Delightfully, 1,2,3,4-tetrahydroquinoline underwent the reaction efficiently, affording the target product 19 in 73% yield with 98% ee. The N-Ts-protected arylamine was also compatible with this transformation, affording the corresponding product 20 in 50% yield with excellent enantioselectivity (95% ee). However, an elevated temperature was required for diarylamine to obtain the desired product, but the enantioselectivity was lower (21). Compared to our previous reaction system27, this catalytic system can convert secondary alkylamine-derived aminals to the corresponding product with better ee under milder conditions but with a lower yield (for details, see Supplementary Fig 34). Substrate scope of amines. aConditions: 1a (0.3 mmol), 2a (0.45 mmol), 3 (0.45 mmol), [Pd(π-cinnamyl)Cl]2 (2.5 mol%), AgClO4 (8 mol%), L10 (11 mol%), CH2Cl2 (1.5 mL), −30 °C, 24 h, isolated yield. b[Pd(π-cinnamyl)Cl]2 (0.5 mol%), AgClO4 (8 mol%), L10 (2.2 mol%). c40 °C. d1a (0.3 mmol), 2a (0.45 mmol), 3 (0.6 mmol), Pd(CH3CN)2Cl2 (5 mol%), AgClO4 (30 mol%), L10 (11 mol%), CH2Cl2 (1.5 mL), −10 °C, 20 h, isolated yield. Ts p-toluenesulfonyl, PMP p-methoxyphenyl, Boc t-butyloxy carbonyl. Apart from secondary amines, primary arylamines are also competent. Only minor adjustments to the reaction conditions were needed to achieve the efficient cross-coupling with aniline, delivering the corresponding allene 22 in 65% yield with 96% ee (Fig. 4B). Similar to the reaction with secondary anilines, substrates bearing either electron-donating groups or electron-withdrawing groups on the phenyl ring all proceeded in high enantioselectivities (84–>99% ee) and moderate to good yields (51–74%). In particular, the reaction could tolerate sensitive functional groups, including Br (30) and I (31), which are useful features for further synthetic transformations. Moreover, naphthylamine and 6-azaindole were also suitable for delivering the corresponding products (36 and 37). Most intriguingly, diaryl sulfoximine, as an excellent ammonia surrogate and also an important pharmacophore in its own right63 was compatible with this catalytic process, converting to corresponding product 38 in acceptable yield with good ee. Unfortunately, no desired products were detected when other amine sources, such as TsNH2, BocNH2, Boc2NH, and BnNH2, were subjected to the reaction. Encouraged by the good functional group compatibility of this reaction, we subsequently assessed its applicability to a biologically active compound. As shown in Fig. 4B, Lapatinib intermediate was subjected to this protocol, delivering the target product 39 in 54% yield with 96% ee. We next turned our attention to investigating the substrate scope of aminoenynes and aldehydes. As demonstrated in Fig. 5, a variety of hept-6-en-4-yn-1-amines with different substituents on the nitrogen atom reacted smoothly to furnish the corresponding products (40-44) in 65–74% yields with excellent enantioselectivities (80–97% ee). Extending the tether length provided the exocyclic chiral allenylamines bearing a 7-membered ring in good yields with excellent ee values (45 and 46). However, no target product was detected when introducing substituents into the alkene group of aminoenynes. In addition to polyformaldehyde, we also investigated the compatibility of substituted aldehydes. To our delight, this three-component one-pot reaction was amenable to a wide range of aliphatic aldehydes bearing phthalimide, phenyl, alkenyl, and chlorine functional groups, affording the chiral exocyclic allenes (47-50) in moderate yields with high ee values, albeit with low diastereoselectivities. Moreover, α,β-unsaturated aldehyde also underwent the reaction smoothly (51). However, the current reaction conditions fail to convert aromatic aldehydes into the corresponding products, which might be attributed to the difficulty in forming the key aminoalkyl cyclopalladated complex B due to the large steric hindrance of the aryl group. Substrate scope of aminoenynes and aldehydes. aConditions: 1 (0.3 mmol), 2 (0.45 mmol), 3 (0.45 mmol), [Pd(π-cinnamyl)Cl]2 (2.5 mol%), AgClO4 (8 mol%), L10 (11 mol%), CH2Cl2 (1.5 mL), −30 °C, 24 h, isolated yield. b−30 °C, 36 h. PMP p-methoxyphenyl, PMB p-methoxybenzyl, NPhth phthalimide. Construction of chiral spirodiamines Over the last decades, there has been a growing recognition of spirocyclic scaffolds as promising building blocks in medicinal chemistry64. Moreover, recent research has demonstrated that replacing traditional flat aromatic cores of drug candidates with sp3-rich templates can be highly beneficial.65 In this respect, spirocyclic scaffolds bearing saturated N-heterocycles and a chiral spiro quaternary carbon are particularly attractive54,66–68. However, despite great efforts in this area, the catalytic enantioselective synthesis of this type of skeleton is still a daunting challenge. As shown in Fig. 6, with primary amines as the reaction partners, we can handily get the chiral spirodiamines through subsequent axial-to-center transfer by treating the reaction mixture with the catalytic amount AgNO3. A series of arylamines were successfully employed in our process by using the tailored phosphoramidite ligand L10, providing chiral spirodiamines 52–58 in moderate yields along with good to excellent ee values (85–97% ee). Notably, the introduction of 6-azaindole could be accomplished and the chiral product 59 was obtained smoothly with high enantioselectivity. Finally, the structure of chiral spirodiamine 59 was unambiguously confirmed by X-ray analysis. Access to chiral spirodiamines. Conditions: (1) 1a (0.3 mmol), 2a (0.45 mmol), 3 (0.6 mmol), Pd(CH3CN)2Cl2 (5 mol%), AgClO4 (30 mol%), L10 (11 mol%), CH2Cl2 (1.5 mL), −10 oC, 24 h. (2) AgNO3 (10 mol%), rt, 4 h, isolated yield. Boc t-butyloxy carbonyl. Synthetic transformations The efficiency and practicality of the reaction were further demonstrated by the large-scale experiments and functional group transformations. As shown in Fig. 7a, under the standard reaction conditions, products 4 and 22 were smoothly obtained on a gram scale (0.89 and 0.66 g, respectively) in good yields with excellent ee values. Several transformations of chiral allene 22 were carried out (Fig. 7b). Treatment of 22 with 2.2 equivalents of NBS yielded dibrominated spirocyclic product 60 in 79% yield with 92% ee. When 22 was mixed with NIS at 0 °C for 12 h, the iodinated spiro-product 61 was formed in 77% yield with 90% ee. Through a Pd-catalyzed arylamination of allene, a phenyl group could be introduced into product 22 to produce product 62 in high yield with excellent enantioselectivity. Moreover, treating 22 with benzoyl chloride afforded the corresponding amide 63 in 91% yield. Furthermore, product 22 can be easily converted to spirodiamine 52 in good yield with a slight loss of enantiopurity under AgNO3 catalysis. Selective hydrogenation of the double bond of 52 under PtO2 catalysis in a hydrogen atmosphere afforded compound 64 in nearly quantitative yield. Additionally, the benzyl group in compound 52 could be readily removed using 1-chloroethyl chloroformate, and the resulting secondary amine could be transformed into sulfonamide 65 through subsequent sulfonation in 73% overall yield. Gram-scale experiments and synthetic transformations. a Gram-scale experiments. b Synthetic transformations. NBS N-bromosuccinimide, NIS N-iodosuccinimide, Ts p-toluenesulfonyl. Discussion In summary, we have demonstrated that the manipulation of electronic properties of remote substituents on BINOL-derived phosphoramidite ligands enables the optimization of Pd-catalyzed asymmetric ring-closing carboamination of enynes. With a tailored electron-deficient chiral phosphoramidite ligand, a broad range of aromatic amines can be compatible with this reaction, yielding a variety of enantiomerically enriched exocyclic allenylamines bearing saturated N-heterocycles. Additionally, employing this catalytic system, a one-pot axial-to-central chirality transfer process was devised, which enables the expedient construction of valuable chiral spirodiamines. The robustness and efficiency of our approach should hold potential for applications in complex molecule synthesis and drug discovery. More broadly, we anticipate that this study may inspire further exploration of remote electronic effects of chiral ligands to address other untapped catalytic asymmetric reactions. Methods General procedure for the asymmetric reactions of aminoenynes, paraformaldehyde and secondary amines Step 1. To a Young-type tube equipped with a magnetic stirrer was added 1 (0.3 mmol), paraformaldehyde 2a (10.8 mg, 0.45 mmol), K2CO3 (8.3 mg, 20 mol%), anhydrous Na2SO4 (8.5 mg, 20 mol%) and MeOH (1.0 mL). The reaction mixture was stirred at 40 °C for 2 h. After evaporation of the solvent under reduced pressure, CH2Cl2 (1.0 mL) was added under the N2 atmosphere and used directly for the next step. Step 2. In an N2-filled glove box, [Pd(π-cinnamyl)Cl]2 (3.9 mg, 2.5 mol%), AgClO4 (5.0 mg, 8 mol%), L10 (23.3 mg, 11 mol%) and CH2Cl2 (0.5 mL) were added to a flame-dried Young-type tube (25 mL). The mixture was stirred at room temperature for 30 min. After that, 3 (0.45 mmol) and the crude product of Step 1 in CH2Cl2 were added to the mixture under the N2 atmosphere. The reaction mixture was degassed with freeze–thaw method for one time and stirred at −30 °C for 24 h. After evaporation of the solvent under reduced pressure, the residue was purified by flash column chromatography on silica gel to give the desired product. The ee value was determined by HPLC analysis with the chiral column. General procedure for the asymmetric reactions of aminoenynes, paraformaldehyde, and primary amines Step 1. To a Young-type tube equipped with a magnetic stirrer was added 1 (0.3 mmol), paraformaldehyde 2a (10.8 mg, 0.45 mmol), K2CO3 (8.3 mg, 20 mol%), anhydrous Na2SO4 (8.5 mg, 20 mol%), and MeOH (1.0 mL). The reaction mixture was stirred at 40 °C for 2 h. After evaporation of the solvent under reduced pressure, CH2Cl2 (1.0 mL) was added under the N2 atmosphere and used directly for the next step. Step 2. In an N2-filled glove box, Pd(CH3CN)2Cl2 (3.9 mg, 5 mol%), AgClO4 (18.6 mg, 30 mol%), L10 (23.3 mg, 11 mol%), and CH2Cl2 (0.5 mL) were added to a flame-dried Young-type tube (25 mL). The mixture was stirred at 40 °C for 30 min. After cooling to room temperature, 3 (0.6 mmol) and the crude product of Step 1 in CH2Cl2 were added to the mixture under an N2 atmosphere. The reaction mixture was degassed with freeze–thaw method for one time and stirred at −10 °C for 20 h. After evaporation of the solvent under reduced pressure, the residue was purified by flash column chromatography on silica gel to give the desired product. The ee value was determined by HPLC analysis with the chiral column. General procedure for the asymmetric reactions of aminoenynes, substituted aldehyde and amines In an N2-filled glove box, [Pd(π-cinnamyl)Cl]2 (3.9 mg, 2.5 mol%), AgClO4 (5.0 mg, 8 mol%), L10 (23.3 mg, 11 mol%) and CH2Cl2 (1.5 mL) were added to a flame-dried Young-type tube (25 mL). The mixture was stirred at room temperature for 30 min. After that, 1 (0.3 mmol), aldehyde 2 (0.45 mmol), and 3 (0.45 mmol) were added to the mixture under N2 atmosphere. The reaction mixture was degassed with freeze-thaw method for one time and stirred at −30 °C for 36 h. After evaporation of the solvent under reduced pressure, the residue was purified by flash column chromatography on silica gel to give the desired product. The ee value was determined by HPLC analysis with the chiral column. General procedure to access chiral spirodiamines Step 1. To a Young-type tube equipped with a magnetic stirrer was added 1 (0.3 mmol), paraformaldehyde 2a (10.8 mg, 0.45 mmol), K2CO3 (8.3 mg, 20 mol%), anhydrous Na2SO4 (8.5 mg, 20 mol%) and MeOH (1.0 mL). The reaction mixture was stirred at 40 °C for 2 h. After evaporation of the solvent under reduced pressure, CH2Cl2 (1.0 mL) was added under N2 atmosphere and used directly for next step. Step 2. In an N2-filled glove box, Pd(CH3CN)2Cl2 (3.9 mg, 5 mol%), AgClO4 (18.6 mg, 30 mol%), L10 (23.3 mg, 11 mol%), and CH2Cl2 (0.5 mL) were added to a flame-dried Young-type tube (25 mL). The mixture was stirred at 40 °C for 30 min. After cooling to room temperature, 3 (0.6 mmol) and the crude product of Step 1 in CH2Cl2 were added to the mixture under an N2 atmosphere. The reaction mixture was degassed with freeze–thaw method for one time and stirred at −10 °C for 24 h. Step 3. To the above reaction mixture was added AgNO3 (5.1 mg, 10 mol%), then stirred at rt for 4 h. After evaporation of the solvent under reduced pressure, the residue was purified by flash column chromatography on silica gel to give the desired product. The ee value was determined by HPLC analysis with chiral column. Supplementary information Supplementary Information Transparent Peer Review file Source data Source data Acknowledgements The authors are grateful for the financial support by the National Natural Science Foundation of China (21925111, 92356302, 22301290, 22301289, and 22350008), the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB0450301) and the National Key R&D Program of China (2021YFA1501003, 2023YFA1507500) (H.H.). This work was partially carried out at the Instruments Center for Physical Science, University of Science and Technology of China. Author contributions H.H. conceived the concept and directed the project. S.Z., Z.Z., and G.Y. conducted the experiments. S.Z. and H.H. wrote the paper. All the authors discussed and analyzed the results and commented on the manuscript. Peer review Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available. Data availability All data supporting the findings of this study are available within the article and its Supplementary Information files or from the corresponding author upon request. Crystallographic data for the structures reported in this article have been deposited at the Cambridge Crystallographic Data Centre, under deposition numbers CCDC 2262824 (L6), 2335182 (Pd-1), 2335183 (Pd-2), 2335184 (Pd-3), and 2335185 (59). Copies of the data can be obtained free of charge via https://www.ccdc.cam.ac.uk/structures/. Source data are provided with this paper. Competing interests The authors declare no competing interests. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. These authors contributed equally: Suchen Zou, Zeyu Zhao. Supplementary information The online version contains supplementary material available at 10.1038/s41467-024-54328-5. References Associated Data Supplementary Materials Supplementary Information Transparent Peer Review file Source data Data Availability Statement All data supporting the findings of this study are available within the article and its Supplementary Information files or from the corresponding author upon request. Crystallographic data for the structures reported in this article have been deposited at the Cambridge Crystallographic Data Centre, under deposition numbers CCDC 2262824 (L6), 2335182 (Pd-1), 2335183 (Pd-2), 2335184 (Pd-3), and 2335185 (59). Copies of the data can be obtained free of charge via https://www.ccdc.cam.ac.uk/structures/. Source data are provided with this paper.