Lie symmetry analysis on heat and mass transport aspects of rate type fluid flow with waste discharge concentration: Keller Box approach Authors: K V Nagaraja, Sumanta Shagolshem, Bhavesh Kanabar, Ankit Kedia, Amal Abdulrahman, Chander Prakash, M Umeshaiah, K Chandan Published: 2024 ABSTRACT AbstractThe present analysis examines the effect of thermal radiation on the stream of Maxwell liquid past a stretchy surface in the presence of a zero-mass flux condition. The effect of waste discharge concentration, thermophoresis-Brownian motion, and porous media on the fluid motion is also considered. Investigation of the liquid flow with waste discharge concentration in stretched sheets may lead to the growth of effective methods for disposing of waste and preventing pollution. Due to their extensive applicability, the mechanisms of flow and heat transmission in the context of thermal radiation play a crucial role in research and industry. This phenomenon often occurs in spacecraft, nuclear reactor cooling, power production, aerospace technologies, combustion applications, gas turbines, hypersonic flights, and high-temperature processes. The modelled governing partial differential equations (PDEs) are converted into dimensionless ordinary differential equations (ODEs) utilizing appropriate similarity variables. Further, the Keller–Box approach is utilized to solve the resultant ODEs numerically. The influence of several parameters on the temperature, concentration and velocity profiles is shown via graphic representations. The intensification in Deborah’s number and porous parameter values declines the velocity profile. As the values of the radiation, thermophoresis, and Brownian motion parameters increase, the thermal profile increases. The concentration profile increases as the pollutant external source parameter value upsurges.Keywords: Maxwell fluid, Stretching sheet, Porous media, Thermophoresis and Brownian motion, Waste discharge, Zero mass fluxSubject terms: Mathematics and computing, Fluid dynamics Introduction The boundary layer flows of non-Newtonian liquids are of noteworthy interest due to their numerous real-world applications in manufacturing as well as industrial procedures. These include drilling fluids, metal spinning, hot rolling paper, optical fibres, plastic polymers, and other further applications. Since no one model can explain every property of non-Newtonian materials, researchers have earlier published a number of non-Newtonian models. These models fall into three main categories: liquids of the integral, rate, and differential types. The liquid model under consideration is a subtype of a rate-type liquid known as a Maxwell liquid. The effects of relaxation time are predicted by this liquid model. Differential liquids cannot predict these kinds of results. Jawad et al.1 numerically studied a Maxwell nanofluid’s heat transfer and flow past a stretching surface. Utilizing Fouriers law, Abbas et al.2 scrutinized the stream of Maxwell liquid on an inclined surface with thermal attributes. The heat flux model effect on the stream of Maxwell liquid via a cylinder was swotted by Khan et al.3. The mass and heat transport analysis on the Maxwell fluid through a cylinder was deliberated by Islam et al.4. The permeability compressed stream of Maxwell liquid near the sensor’s layer was inspected by Salahuddin et al.5. Megahed6 explored the augmentation of the heat transport process using a Maxwell liquid stream across a stretched sheet immersed in a permeable medium. The electrically conductive movement of a bioconvective Maxwell nano liquid along an extending surface was theoretically analyzed by Jawad et al.7. The phenomenon of liquid stream produced by a stretched sheet (SS) is now an area of discussion for many academics owing to its enormous and basic relevance, theoretically and practically. Large metallic plates cooled in cooling paths, heat exchanger designs, wire and fibre coating, plastic film manufacturing, continuous casting, crystal growth, artificial fibre, reactors fluidization, chemical processing apparatus, polymer sheets, polymer extrusion, copper wire annealing and tinning, etc. are a few examples. Waseem et al.8 considered the 3D stream of a micropolar nanoliquid via an exponential SS. The characteristics of mass and heat transport on the Powell–Eyring nanofluid stagnation point flow on an SS were deliberated by Majeed et al.9. Karthik et al.10 evaluated the influence of particle deposition on the heat transport properties of a fluid motion across an SS. Varsha et al.11 researched the significance of mixed convection on hybrid nanoliquid motion and heat transportation across an SS. Ramasekhar and Jawad12 studied a magnetic field’s effect on the nanoliquid motion via a wedge. Cui et al.13 investigated the effects of non-similar modelling for heated convection evaluation of nanofluid flow over an SS with chemical responses and heat production. The motion of a liquid across an oscillatory stretchy surface with Fourier’s and Fick’s laws was assessed by Srilatha et al.14. The heat transmission and stream characteristics of nanoliquid over a bidirectional SS were inspected by Waseem et al.15. Li et al.16 proposed the MHD viscous flow of a hybrid nanoliquid along a horizontal SS. In the process of creating materials, melt problems from a slit are then stretched to the required thickness. Most of these instances involve cooling to produce the intended final product features, and the cooling pace is often adjusted by passing the segments through a porous medium. Saturated porous media boundary layer flows have several applications in fluid dynamics. Numerous thermal engineering applications, including moisture transport in temperature insulations, ceramics processing, geothermal power extraction, nuclear reactor cooling systems, subterranean atomic waste removal, groundwater pollution, and filtration processes, are made possible by studying heat transport in an absorbent media. The magnetized nanofluid hybrid circulation across the stretched cylinder with porosity impact was elaborated numerically by Ramasekhar et al.17. Pati et al.18 critically assessed the local thermal equilibrium technique for studying convective movement in porous media. The radiation influence on Casson liquid flow across a porous non-linear interface with a chemical response was swotted by Bejawada et al.19. Mandal et al.20 elaborated on the consequence of surface curves in mixed bioconvective nanofluid movement in permeable media. Ahmad et al.21 swotted the micropolar liquid stream via a permeable media across channel walls. Chandan et al.22 assessed the effect of convection on the heat transport attributes of the permeable convex extended surface utilizing the neural network approach. The MHD flow of a Casson nanofluid with heat transfer and mass flux directed towards an SS was analyzed by Jawad et al.23. Over a 3D porous SS, Liu et al.24 inspected the mass and heat transmission in a hybrid nanofluid. Thermophoresis or thermodiffusion is the term used to describe the force that different suspended particles react to due to a heat gradient. Applications include electrostatics, drug discovery, aerosol, optical fibres, semiconductors, microemulsions, and separating different polymer particles. Brownian motion explores the erratic movement of particles suspended in a fluid. It has several applications in astrophysics, electrical systems, plasma research and nanotechnology. Thermophoresis and Brownian motion (TBM) are vital for liquids’ mass and heat transport. Irfan25 examined how TBM affected the motion of nanofluid across an SS. The outcome of TBM on the stream of nanoliquid on a surface was researched by Thabet et al.26. Kumar et al.27 explored the liquid stream over the permeable slider with TBM using numerical simulation. Jalili et al.28 scrutinized heat transfer in the nanoliquid stream over a sheet with TBM. Saghir and Rahman29 explored the flow of nanoliquid on the SS with TBM. The influence of chemical reactions and TBM on the flow of liquid across a permeable surface was outlined by Algehyne et al.30. Waseem et al.31 elucidated the flow of viscoelastic liquid via a stretching sheet with the significance of TBM and thermal radiation. Ramasekhar et al.32 elucidated the impact of TBM on heat transport and nanoliquid flow past a Riga surface. Jawad et al.33–35 examined the influence of TBM on the liquid stream across various surfaces. The pollutants quantity present in soil, water or the air is mentioned as their concentration. Pollutants more significantly impact humans, animals, and other living things in terms of health. It isn’t easy to anticipate with precision the movement of pollutants. Some investigations have yielded preliminary findings about the influence of exterior pollutant source characteristics on pollution concentrations. Karthik et al.36 reviewed the liquid stream across an inclined cylinder with the pollutant concentration. Yaseen et al.37 probed the effects of HSS and waste discharge concentration on the fluid stream flowing over an SS. Lim et al.38 assessed the effects of turbulent diffusion and chemical processes on creating local concentrations of pollutant distributions. Vinutha et al.39 scrutinized the fluid stream via a divergent channel with the impact of pollutant concentration. Makinde and Chinyoka40 studied the pollutant dispersal on the liquid stream through the cylinder. Using the non-Fourier approach, Nazir et al.41 probed the consequence of Hall forces on the stream of Carreau liquid via a cone. The consequence of entropy production on the Ellis liquid stream across a channel was delineated by Imran et al.42. Ongoing through the literature survey, the stream of Maxwell liquid via an SS with waste discharge concentration has not yet been examined. To fill this research gap, the current investigation explores the significance of waste discharge concentration, TBM, and thermal radiation on the Maxwell liquid stream. Exploring the liquid flow with waste discharge concentration in connection to elastic sheets might help create effectual waste disposal and pollution anticipation strategies. The governing PDEs are transformed into dimensionless ODEs with appropriate similarity variables. Additionally, the obtained ODEs are solved by employing the Keller–Box approach. The significance of several non-dimensional parameters on the thermal, velocity, and concentration profiles is depicted with a visual representation. Mathematical formulation Let’s consider steady Maxwell liquid flows past an SS with porous media and zero mass flux condition. TBM, radiation, and waste discharge concentration influence on liquid stream are also considered. The mass and heat transport mechanisms are explored using the boundary condition of zero-mass flow at the surface. Zero normal flux of nanoparticles at a stretched surface causes them to move away from the sheet when combined with a nonzero normal flux condition. This concerns a continuous boundary layer stream and the energy transfer of a Maxwell liquid flow, assuming that the sheet is constantly extended horizontally. The sheet is being stretched at a velocity of , where a is the positive constant of the stretching sheet. Let the velocity components be assumed as along directions as depicted in Fig. 1. The temperature and concentration are taken as T and C. The governing equations of the present issue are presented as follows, Flow geometry. The associated boundary conditions are given as, The radiative heat flux expression is defined as, It accepts that temperature modification within the motion in such that term can be extended by employing the Taylor series up to and further, dropping the higher order terms, we obtain . Hence, Let us assume the following dimensionless variables Thus, Eqs. (1) and (5) reduces to and the boundary conditions: Now, by introducing the stream function , wherewe reduce (1) and (5) to: and the boundary conditions becomes where Lie symmetry analysis We consider the one-parameter Lie group of transformation of (12)–(15) as (see Refs.43,44) with as parameter and are the infinitesimals to be determined. The infinitesimal generator associated with (16) is given as: Using the DESOLV package45, we obtained the following infinitesimals: where are arbitrary constant. Thus, taking account of (17), we have the following Lie symmetry generators: Reduction to ordinary differential equations In the following sections, we consider symmetry to reduce the model (12–15) to the system of ODE. Therefore, the characteristic equations w.r.t can be written as which, on solving, yields the following similarity variables and similarity forms: Thus, exploiting (20) in (12–15), we have the following reduced ODE system with the B.C.: Boundary conditions: Numerical solution via Keller box method The reduced dimensionless Eqs. (12–14) along with (15) are solved with the well-known numerical method, the Keller box method. The Keller–Box technique is an implicit finite-difference scheme developed to handle particularly nonlinear ODE systems, originating from boundary layer theory and fluid dynamics. Unlike explicit approaches, such as Euler or Runge–Kutta that can be unstable until very small step sizes are utilized, the method uses an implicit discretization strategy, making it unconditionally stable for many issues. Further, with the box approach, the domain is divided into small intervals or a mesh, and the solution is then approximated over each box (or grid cell) using finite differences. For boundary layer problems, this technique maintains exactness at the boundaries, which is essential. When dealing with boundary layer problems, this approach works effectively when steep gradients are close to boundaries. Other techniques, such as shooting or finite-difference approach, can have difficulties capturing these gradients unless an extremely tiny grid is employed. Therefore, we employed the Keller box method in our reduced model due to its accuracy, stability, effectiveness and computational efficiency. To get the numerical results, the approach uses the block elimination method, Newton’s iterative scheme, and the finite difference method. Thus, we converted (12–14) into first-order ODEs with the following assumptions: then, (21–23) are reduced to: with the boundary conditions Further, considering the grid point defined by where is the -spacing, we discretized (25–28) with the central difference scheme at the midpoint : where the boundary condition becomes Exploiting the following Newton method: we linearize (31–37), ignoring higher orders of : where The boundary (38) becomes Finally, the reduced linear system is solved using the block elimination method. The comparison of the present values with published works is represented in Table 1. Table 1For some reduced cases the comparison of the present values with already published works.RKF method46FDM47Present results0.720.46310.463150.46314310.58200.581990.58191531.16521.165231.165222102.30802.307962.308069 For some reduced cases the comparison of the present values with already published works. The engineering coefficients are given as follows, Results and discussion Numerical computation is performed to determine the variables’ consequence on the concentration, thermal and velocity fields. The current segment inspects the effect of numerous parameters on the involved fields via graphic representations. The outcome of on is exposed in Fig. 2. Here, the escalation in standards of declines the . An upsurge in denotes a more elastic and less Newtonian behaviour of the liquid in the assumed flow situation. Because of its increased elasticity, the liquid resists deformation more forcefully, which lowers the velocity gradients close to the stretched sheet. As an outcome, as the liquid’s capacity to stretch and adapt to the boundary motion declines, so does the velocity profile. Further impeding the fluid’s travel is the interplay between the permeable medium and the liquid’s viscoelastic nature. The concentration of waste discharge may additionally exacerbate the fluid’s increased resistance, which lowers the . Behaviour of on . The impact of on is portrayed in Fig. 3. The decreases for increase in values. The permeability of the porous media through which the porosity parameter describes the Maxwell liquid flows. Superior resistance to fluid stream results from a decrease in the medium’s permeability, specified by an increase in the porosity parameter. As porosity rises, increasing barriers from the porous matrix restrict the fluid’s movement. Due to this constraint, the velocity gradient close to the stretching sheet decreases, which lowers the velocity profile as a whole. This impact is compounded by the zero-mass flux situation, which prevents flow and increases the drag forces in the fluid due to the waste discharge concentration. Consequently, the combined effect of these circumstances and increased porosity causes the liquid stream to significantly slow down, as shown by the reduced velocity profile. Behaviour of on . Figure 4 explores the encouragement of on . Here, the intensification in improves the . The degree of temperature fluctuations that lead to the random motion of small particles inside the fluid is represented by the . An upsurge in this parameter improves the fluid’s internal thermal energy transfer in the case of the considered flow. Because of the increased molecular mobility, heat is mixed and dispersed more effectively, which raises the . Figure 5 depicts the influence of on . The shows increasing behaviour for rise in values. The quantifies the movement of particles caused by temperature gradients from hotter to colder places inside a fluid. This particle mobility is enhanced by a larger thermophoresis value in the context of evaluated fluid flow. Particles transmit thermal energy as they move from heat to cold regions, which improves the fluid’s total heat transmission. A greater thermal profile is the consequence of this enhanced heat transmission. The liquid’s temperature growths noticeably due to the thermophoresis effect, intensifying the liquid’s temperature conductivity. Behaviour of on . Behaviour of on . The significance of on is described in Fig. 6. Here, increased improves the . The impact of on heat transmission through a fluid is represented by the . Enhanced radiative heat transmission is indicated by an increase in the . This extra heat energy increases the total thermal energy in the fluid via radiation, which supports the conduction and convection processes. As a result, any thermal resistances provided by the porous medium and the concentration of waste output are overcome, and the temperature profile rises as the fluid absorbs more radiant heat. This augmented heat absorption achieves a greater temperature throughout the liquid. Behaviour of on . The effect of on is exhibited in Fig. 7. Here, the increased improves the . The measures the rate at which pollutants are added to the liquid. A higher value of this parameter indicates a larger intake of contaminants. This increased supply of pollutants immediately raises the concentration in the liquid. The concentration profile intensifies with the accumulation of contaminants, indicating increased contamination levels. The effect of on is signified in Fig. 8. The shows decreasing trend for increasing . The Brownian motion parameter indicates the degree to which the liquid particles move randomly. Thermal fluctuations cause the dispersion of particles to rise with an increase in this parameter. This increased random mobility helps the contaminants mix and diffuse more effectively, which results in a more uniform dispersal and lower localized concentrations. Because the contaminants are dispersed more uniformly throughout the fluid, they overcome the porous medium’s resistive effects and minimize high concentration spots, leading to a drop in . Figure 9 shows the leverage of on . The shows increasing trend for increasing . More particles travel towards colder regions as this parameter increases. This deliberate movement tends to gather particles in certain regions, raising the concentration of contaminants. A greater concentration profile exists in the colder regions where thermophoresis pulls particles away from hotter regions. The values of , , and for several values of , , , , , , is illustrated in Table 2. Behaviour of on . Behaviour of on . Behaviour of on . Table 2Values of , , and for various values of , , , , , , .0.10.10.10.10.10.10.1− 1.0743− 1.35560.65530.2− 1.0986− 1.35370.67260.3− 1.1226− 1.35180.68920.1− 1.0743− 1.35560.65530.2− 1.1196− 1.35180.67390.3− 1.1632− 1.34820.69140.1–− 1.35560.65530.2− 1.28560.59630.3− 1.22450.54510.1− 1.35560.65530.2− 1.2440.1140.3− 1.1369− 0.06480.1− 1.35560.65530.2− 1.2181.39110.3− 1.09471.92370.1− 1.35560.65530.2− 1.47251.20690.3− 1.60211.79170.1− 1.35560.65530.2− 1.36270.6930.3− 1.37090.736 Values of , , and for various values of , , , , , , . Conclusions This paper inspects the effect of pollutant concentration on the Maxwell liquid flow through a stretchable sheet without a mass flux at the boundary. The results might find a use in operations using fluids similar to Maxwell liquids, like polymer processing, coating fluxes, chemical and wastewater treatment. Improved designs for effective material processing and waste management systems may result from understanding how contaminants’ concentration influences fluid behaviour. Research on innovative materials employed in stretchy electronics, smart textiles, or biomedical devices where fluid viscoelastic behaviour plays a role can be influenced by understanding fluid behaviour across elastic sheets. For a set of PDEs, we derive Lie point symmetries. Utilizing related invariants, we generate novel similarity transformations for the model in issue utilizing some of the known generators of Lie point symmetry. The model may be made simpler for nonlinear ODEs by using these adjustments. The resulting ODEs are numerically solved using the Keller–Box method, which is well-known for efficiently solving coupled, nonlinear PDEs that result from similarity transformations of ODEs. Boundary conditions are essential for fluid flow issues. Because the Keller–Box technique simplifies addressing both boundary conditions, it is especially well-suited for issues involving boundary layers. The major findings of the present study are as follows: The decreases as Deborah’s number upsurges. The enhanced elasticity of the liquid results in more resistance to deformation, hence reducing the velocity gradients around the stretched sheet. Consequently, as the liquid’s ability to deform and respond to boundary motion diminishes, the velocity profile also decreases. The decreases as Deborah’s number upsurges. The enhanced elasticity of the liquid results in more resistance to deformation, hence reducing the velocity gradients around the stretched sheet. Consequently, as the liquid’s ability to deform and respond to boundary motion diminishes, the velocity profile also decreases. The intensification in values of the declines the . Enhanced resistance to liquid flow arises from a reduction in the medium’s permeability, characterized by a growth in the . The intensification in values of the declines the . Enhanced resistance to liquid flow arises from a reduction in the medium’s permeability, characterized by a growth in the . As the values of radiation parameter intensify, the thermal profile increases. The additional thermal energy elevates the overall thermal energy in the fluid by radiation, hence facilitating conduction and convection processes. As the values of radiation parameter intensify, the thermal profile increases. The additional thermal energy elevates the overall thermal energy in the fluid by radiation, hence facilitating conduction and convection processes. The thermal profile rises as the values of and upsurges. The increased molecule mobility enhances the mixing and dispersion of heat, resulting in an elevated temperature. Particles convey thermal energy when they migrate from warmer to cooler regions, enhancing the fluid’s heat transfer. This improved heat transfer results in a higher thermal profile. The thermal profile rises as the values of and upsurges. The increased molecule mobility enhances the mixing and dispersion of heat, resulting in an elevated temperature. Particles convey thermal energy when they migrate from warmer to cooler regions, enhancing the fluid’s heat transfer. This improved heat transfer results in a higher thermal profile. The upsurge in values of intensifies the concentration profile. A greater value of this parameter indicates an increased consumption of pollutants. The augmented supply of contaminants promptly elevates the concentration in the liquid. The upsurge in values of intensifies the concentration profile. A greater value of this parameter indicates an increased consumption of pollutants. The augmented supply of contaminants promptly elevates the concentration in the liquid. This work advances the capacity to simulate and regulate industrial processes by advancing the creation of more precise mathematical models that can forecast the behaviour of non-Newtonian fluids under varied circumstances. Additionally, this work sheds light on the properties of mass and heat transmission of complicated fluids in porous media, which is critical for improving chemical reactors and thermal management systems. This study may be extended to include three or more hybrid stages to determine the most successful among them in the future. Acknowledgements The authors extend their appreciation to the Deanship of Research and Graduate Studies at King Khalid University for funding this work through Large Research Project under grant number RGP.2/159/45. List of Symbols Velocity components Concentration Density Mass-diffusion coefficient Pollutant external source variation Skin friction Temperature Stefan–Boltzmann constant Dimensionless concentration Porosity Deborah number Sherwood number Prandtl number Stretching constant Thermo-diffusion coefficient Pollutant external source parameter Brownian motion parameter Thermophoresis parameter Wall temperature Axis Thermal conductivity Specific heat Kinematic viscosity Mean absorption coefficient Nusselt number Dimensionless temperature Schmidt number Porosity parameter Ambient temperature Dimensionless velocity Radiative heat flux Pollutant external source variation parameter Radiation parameter Author contributions Nagaraja and Sumanth developed the theoretical formalism and writing—original draft preparation. Bhavesh Kanabar, Ankit Kedia, Amal, Chander Prakash, Umeshaiah and Chandan have performed the numerical simulations, validation. discussions, formal analysis, and investigation. All authors discussed the results and contributed to the final manuscript. Chandan supervised the findings of this work. Declarations Competing interests The authors declare no competing interests. Data availability The datasets used and/or analyzed during the current study are available from the corresponding (Chandan) on reasonable request. Footnotes Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. References Associated Data Data Availability Statement The datasets used and/or analyzed during the current study are available from the corresponding (Chandan) on reasonable request.