Molecular, spectroscopic and thermochemical characterization of C2Cl3, C2F3 and C2Br3 radicals and related species Authors: María Liz Ferreira, Franco Ignacio Dubois, María Eugenia Tucceri, María Paula Badenes Published: 2024 ABSTRACT AbstractThis work reports a detailed theoretical study of the molecular parameters, harmonic vibrational frequencies, UV absorption spectra and standard enthalpies of formation for the radicals C2X3 (with X = F, Cl and Br) and a comparison with the corresponding determinations for the rest of the members of the family C2Xn (with n = 2-4). Molecular properties were calculated using different levels of theory: density functional theory employing the B3LYP, X3LYP, BMK, M06-2X and M08-HX functionals combined with the basis sets 6–311++G(3df,3pd) and aug-cc-pVTZ, and the ab initio composite models G3B3 and G4. Structural and spectroscopic characterization of the C2F3, C2Cl3 and C2Br3 radicals, along with the estimation of the enthalpies of formation of C2F3 and C2Cl3, were derived here for the first time, to our knowledge. In particular, values of −220.9 ± 2.9, 230.8 ± 3.8 and 375.4 ± 5.9 kJ mol−1 were computed for enthalpies of formation of C2F3, C2Cl3 and C2Br3, respectively. Additionally, enthalpies of formation for related closed-shell molecules were obtained with less uncertainty compared to those found in the literature. The recommended values of −669.6 ± 3.8, −23.0 ± 4.6 and 155.3 ± 5.0 kJ mol−1 were derived for C2F4, C2Cl4 and C2Br4, while corresponding values of 0.6 ± 6.3, 228.1 ± 2.1 and 319.6 ± 5.4 kJ mol−1 were estimated for C2F2, C2Cl2 and C2Br2, respectively.Keywords: quantum-chemical calculations, standard enthalpy of formation, UV absorption spectra, trifluoroethenyl radical, trichloroethenyl radical, tribromoethenyl radical Introduction Halogenated hydrocarbon radicals are important constituents of combustion and incineration processes [1–3]. For example, the trichloroethenyl radical (C2Cl3), as other chlorinated compounds, is involved in significant and sensitive chemical reactions during the pyrolysis of chlorine-rich unsaturated hydrocarbons. In fact, in an investigation of the kinetics and mechanism of the thermal decomposition of hexachlorocyclopentadiene from the combustion of cyclodiene pesticides, the formation of C2Cl3 radicals and dichloroethyne (C2Cl2) as fission products of trans-C4Cl5 radicals was suggested [4]. C2Cl3 radicals were also included in the mechanism of combustion of C2HCl3 [1] and in the pyrolysis of tetrachloroethene (C2Cl4) [2]. On the other hand, a number of both experimental and theoretical studies dealt with the reactions of C2Cl3 radicals with O2 [5–8], with NO2 [9,10] and with Cl2 [3], as well as with its thermal decomposition [11]. That is, in several systems of combustion and pyrolysis of unsaturated chlorinated hydrocarbons, C2Cl3 radicals have been considered as one of the most important and sensitive species, as well as the related C2Cl2 and C2Cl4 closed-shell species [12–14]. The reactions with O2 and NO2 of the analogous C2F3 radicals were also examined [15], and a vibrational characterization of the C2F3 by Fourier-transform infrared (FTIR) spectroscopy in an argon matrix was performed [16,17]. Also, this radical was proposed as a product in one of the pathways of the thermal dissociation of hexafluoropropene (C3F6) [18]. Regarding the analogous brominated species, from a time-resolved X-ray diffraction investigation, it is proposed that C2Br4 is a final stable product of photolysis of CBr4 in methanol [19]. However, thermochemical information on brominated hydrocarbons and their related radicals is scarce despite their role in fire suppression, as well as their potential to form a variety of environmental pollutants. As far as we know, there are theoretical estimations of the enthalpies of formation of C2Br2, C2Br3 and C2Br4 but without associated errors [20–22]. Kinetic modelling is of great importance for a better understanding of chemical reaction mechanisms. However, the success of such modelling is currently limited by the lack of information on molecular and basic thermochemical properties of the involved halogenated species. Therefore, in this work, a comparative study of structural, vibrational and thermochemical characterization of the C2Xn, with X = F, Cl and Br and n = 2–4, from density functional theory (DFT) and accurate composite quantum-chemical methods was performed. Also, a detailed time-dependent DFT (TD-DFT) analysis of the UV and visible spectra of the studied species was carried out. Thus, accurate molecular and thermodynamic parameters derived here can be used for future kinetic investigations. Computational methods In this investigation, DFT was used, particularly with the formulations B3LYP [23], X3LYP [24], BMK [25], M06-2X [26], MN15 [27] and M08-HX [28], as implemented in the Gaussian 16 program package [29]. The large 6–311++G(3df,3pd), or 6–311+G(3df) when no H atoms are present in the molecule, and aug-cc-pVTZ basis sets were employed in all cases. Additionally, the ab initio composite models G3B3 [30] and G4 [31] were used, combined with the DFT optimizations: G3B3//DFT/6–311++G(3df,3pd), G3B3//DFT/aug-cc-pVTZ, G4//DFT/6–311++G(3df,3pd) and G4//DFT/aug-cc-pVTZ. Geometry optimizations were carried out without symmetry constraints using analytical gradient methods for all the studied species. Harmonic vibrational frequencies were obtained through analytical second derivative methods at the calculated equilibrium structures. The choice of the DFT methods employed here lies in fact that most of them have been specially designed for thermochemical and kinetic studies. Also, the B3LYP performance in the treatment of the investigated group of molecules was evaluated, because it is employed in the composite methods G3B3 and G4. The TD-DFT calculations were used to characterize electronically the excited states of the studied species. It is widely recognized that the TD-DFT gives a well-balanced description of open-shell systems, such as excited states of radicals [32]. However, to determine the most suitable DFT models to describe the absorption spectra of this group of molecules, the aforementioned formulations were employed and tested against experimental information. Experimental details The infrared (IR) spectrum of pure liquid C2Cl4 was recorded at room temperature with a spectral resolution of 2.0 cm−1 using a Nicolet 8700 FTIR spectrophotometer in attenuated total reflectance (ATR) mode, employing a ZnSe crystal. To enhance the signal-to-noise ratio, 32 scans were averaged. Subsequently, the obtained spectrum was normalized using the OMNIC 8.0 spectroscopy software prior to analysis and comparison. The chemical C2Cl4, from Sigma-Aldrich with a purity of 99.5%, was used in the experiments. Results and discussion Molecular structures and harmonic vibrational frequencies We have no knowledge of the existence of experimental information for geometrical parameters and/or harmonic vibrational frequencies for the C2F3, C2Cl3 and C2Br3 radicals. Therefore, we first theoretically investigated the related molecules C2X4 and C2X2, with X = F, Cl and Br, for which experimental information is available [33–36], and then decided the most suitable levels of theory to estimate the properties of C2X3. The geometrical parameters and harmonic vibrational frequencies for C2X4 and C2X2 were obtained using the B3LYP, X3LYP, BMK, M06-2X, MN15 and M08-HX functionals, combined with the 6–311+G(3df) and aug-cc-pVTZ basis sets. Particularly, their structural parameters are presented along with the experimental available information in table 1. Table 1. Structural parameters calculated at different levels of theory for C2X4 and C2X2 with X = F, Cl and Br (bond lengths in Å and angles in degrees). (DFT calculations were combined with the 6–311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. Experimental information is also included for C2F4 and C2Cl4 from [33], for C2Br4 from [34], for C2F2 and C2Cl2 from [35] and for C2Br2 from [36]. MAD, mean absolute deviation.)parametersexp.B3LYPX3LYPBMKM06-2XMN15M08-HX C2F4 r(C = C)1.3111.321 (1.321)1.320 (1.320)1.321 (1.321)1.316 (1.316)1.319 (1.319)1.316 (1.316)r(C–F)av1.3191.316 (1.319)1.315 (1.318)1.305 (1.307)1.308 (1.311)1.309 (1.311)1.312 (1.316)∠(C = C–F)av123.8123.4 (123.4)123.4 (123.4)123.4 (123.4)123.3 (123.4)123.3 (123.3)123.3 (123.4)∠(F–C–F)112.4113.2 (113.1)113.2 (113.1)113.3 (113.3)113.3 (113.3)113.3 (113.3)113.3 (113.3)MAD in bond lengths0.007 (0.005)0.007 (0.005)0.012 (0.011)0.008 (0.007)0.009 (0.008)0.006 (0.004)MAD in bond angles0.60 (0.55)0.60 (0.55)0.65 (0.65)0.70 (0.65)0.80 (0.80)0.80 (0.75) C2F2 r(C≡C)1.1871.183 (1.183)1.182 (1.182)1.181 (1.181)1.179 (1.180)1.182 (1.182)1.179 (1.179)r(C–F)av1.2831.283 (1.285)1.282 (1.284)1.274 (1.276)1.279 (1.282)1.279 (1.281)1.281 (1.285)∠(C≡C–F)av180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)MAD in bond lengths0.002 (0.003)0.003 (0.003)0.008 (0.007)0.006 (0.004)0.005 (0.004)0.005 (0.005) C2Cl4 r(C = C)1.3541.339 (1.338)1.338 (1.337)1.338 (1.337)1.334 (1.333)1.335 (1.334)1.333 (1.332)r(C–Cl)av1.7181.719 (1.725)1.717 (1.724)1.728 (1.734)1.708 (1.713)1.670 (1.703)1.707 (1.712)∠(C = C–Cl)av122.15122.5 (122.5)122.5 (122.5)122.4 (122.4)122.3 (122.4)122.3 (122.3)122.2 (122.2)∠(Cl–C–Cl)115.7115.0 (115.0)115.1 (115.1)115.1 (115.1)115.3 (115.3)115.5 (115.5)115.5 (115.6)MAD in bond lengths0.008 (0.012)0.009 (0.012)0.013 (0.017)0.015 (0.013)0.034 (0.018)0.016 (0.014)MAD in bond angles0.53 (0.53)0.45 (0.48)0.43 (0.43)0.28 (0.33)0.18 (0.18)0.13 (0.08) C2Cl2 r(C≡C)1.2461.198 (1.199)1.197 (1.198)1.195 (1.196)1.194 (1.195)1.196 (1.196)1.194 (1.194)r(C–Cl)av1.6121.635 (1.642)1.635 (1.641)1.652 (1.659)1.634 (1.639)1.629 (1.633)1.633 (1.638)∠(C≡C–Cl)av180179.9 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)MAD in bond lengths0.036 (0.039)0.036 (0.039)0.046 (0.049)0.037 (0.039)0.034 (0.036)0.037 (0.039)MAD in bond angles0.10 (0.00)0.00 (0.00)0.00 (0.00)0.00 (0.00)0.00 (0.00)0.00 (0.00) C2Br4 r(C = C)1.3621.336 (1.336)1.335 (1.335)1.339 (1.338)1.333 (1.332)1.334 (1.333)1.333 (1.332)r(C–Br)av1.8811.891 (1.892)1.890 (1.890)1.882 (1.885)1.875 (1.877)1.867 (1.865)1.873 (1.875)∠(C = C–Br)av123.0 (123.0)123.0 (122.9)122.9 (122.9)122.8 (122.8)122.7 (122.7)122.6 (122.6)∠(Br–C–Br)115.2114.1 (114.1)114.1 (114.1)114.2 (114.2)114.3 (114.3)114.5 (114.7)114.9 (114.9)MAD in bond lengths0.018 (0.019)0.018 (0.018)0.012 (0.014)0.018 (0.017)0.021 (0.023)0.019 (0.018)MAD in bond angles1.10 (1.10)1.10 (1.10)1.00 (1.00)0.90 (0.90)0.70 (0.50)0.50 (0.50) C2Br2 r(C≡C)1.2051.201 (1.201)1.200 (1.201)1.199 (1.200)1.197 (1.198)1.200 (1.200)1.197 (1.197)r(C–Br)av1.791.794 (1.795)1.793 (1.794)1.794 (1.798)1.788 (1.790)1.784 (1.783)1.785 (1.787)∠(C≡C–Br)av180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)180.0 (180.0)MAD in bond lengths0.004 (0.005)0.004 (0.004)0.005 (0.007)0.005 (0.004)0.006 (0.006)0.007 (0.006) Structural parameters calculated at different levels of theory for C2X4 and C2X2 with X = F, Cl and Br (bond lengths in Å and angles in degrees). (DFT calculations were combined with the 6–311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. Experimental information is also included for C2F4 and C2Cl4 from [33], for C2Br4 from [34], for C2F2 and C2Cl2 from [35] and for C2Br2 from [36]. MAD, mean absolute deviation.) As it is expected, the C2X4 molecules lie on a plane, while the C2X2 present linear structure. Another known characteristic that can be observed is the shortening of the CC bond lengths when passing from brominated to chlorinated substituents, with the smallest bond lengths observed for the fluorinated compounds [37]. This shortening is similar in C2X4 and in C2X2 species. For example, values of 1.339 Å (C2Br4), 1.338 Å (C2Cl4), 1.321 Å (C2F4), 1.199 Å (C2Br2), 1.195 Å (C2Cl2), and 1.181 Å (C2F2), were derived at the BMK/6–311+G(3df) level. All the functionals employed here give very good results, but the B3LYP method shows the smallest mean absolute deviations (MAD) from the experimental values with both used basis sets. In some cases, the calculations with the Pople basis set give smaller MAD values than those with the Dunning basis set, while in others, this is reversed. On the other hand, the calculated harmonic vibrational frequencies are listed in tables 2 and 3. It should be noted that owing to the high symmetry of these species, several vibrational modes are not active in the IR. Therefore, experimental vibrational frequencies included in these tables were obtained from IR spectroscopy or from Raman spectroscopy when the modes are IR inactive [38–42]. A low dispersion is observed among the calculated values, being again the B3LYP/6–311+G(3df) level the method with the smallest MAD values, although all the functionals give acceptable results. In addition, the obtained intensities show good agreement with the available experimental information. The C2X4 compounds possess twelve vibrational modes, nine of which are movements in the plane of the molecules (five stretching, three bending and one rocking), while three are out of it (two involving C out-of-plane motions and one torsional mode). In the case of C2X2 species, they present seven vibrational modes, with three entailing movements along the molecular axis (stretching modes) and the remaining four are out of this axis. Moreover, as it is expected, a decrease in the C2X4 vibrational frequencies is observed when increasing halogen mass. For the C2X2 family, the behaviour is mostly the same, except for certain vibrational modes associated with XCC movements where the frequencies are higher for C2Cl2. Additionally, figure 1 shows the IR spectrum of pure liquid C2Cl4, determined experimentally in our laboratory, with a Nicolet 8700 FTIR spectrophotometer in ATR mode. It is possible to highlight the good agreement observed between the vibrational frequencies calculated in this research and the experimental available information (table 2). As can be seen from figure 1, two high-intensity peaks corresponding to the symmetrical (778.0 cm−1) and asymmetrical stretching modes of CCl2 (909.6 cm−1) are observed. Table 2. Harmonic vibrational frequencies (cm−1) and approximate assignments calculated at different levels of theory for C2F4, C2Cl4 and C2Br4. (DFT calculations were combined with the 6-311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. Experimental information is also included for C2F4, C2Cl4 and C2Cl4 [38]. S, strong; M, medium; W, weak. MAD, mean absolute deviation.)approximate assignmentsexp.B3LYPX3LYPBMKM06-2XMN15M08-HX C2F4 stretching C = C1872a1906 (1905)1914 (1913)1939 (1927)1960 (1963)1962 (1957)1956 (1959)stretching asym. CF21340a1329 (1323)1336 (1330)1426 (1420)1403 (1396)1399 (1394)1369 (1361)stretching asym. CF21337 S1325 (1320)1331 (1328)1413 (1409)1399 (1394)1397 (1392)1362 (1357)stretching sym. CF21186 S1186 (1182)1192 (1187)1245 (1242)1230 (1229)1231 (1227)1207 (1202)stretching sym. CF2778a796 (794)799 (797)829 (827)824 (821)823 (820)811 (807)C out of plane558 S559 (554)564 (559)573 (571)586 (582)603 (590)602 (597)bending CCF551a556 (553)558 (555)573 (571)567 (565)560 (557)565 (562)bending CF2508a555 (553)557 (555)571 (564)564 (564)558 (554)559 (556)C out of plane406 S417 (415)418 (417)420 (411)427 (428)431 (427)433 (430)bending CF2394a400 (398)400 (399)409 (407)403 (404)398 (397)399 (398)rocking CF2218 S212 (210)211 (210)219 (215)209 (214)205 (202)209 (207)torsion190a200 (199)201 (200)207 (207)205 (206)201 (201)200 (203)MAD13 (14)15 (14)41 (37)38 (36)38 (34)29 (27) C2Cl4 stretching C = C1571a1612 (1615)1618 (1622)1641 (1634)1657 (1667)1676 (1679)1676 (1679)stretching asym. CCl21000a966 (956)972 (962)1030 (1032)1014 (999)1034 (1008)1051 (1037)stretching asym. CCl2908 S884 (875)890 (880)950 (955)937 (928)957 (957)967 (962)stretching sym. CCl2777 S776 (767)779 (771)808 (802)806 (801)813 (808)816 (808)C out of plane512a564 (543)567 (546)561 (533)569 (548)591 (559)579 (555)stretching sym. CCl2447a450 (444)451 (446)466 (465)467 (462)470 (468)473 (469)bending CCCl347a348 (344)349 (346)355 (351)357 (353)356 (348)359 (354)bending CCl2310 W317 (311)318 (312)313 (306)319 (312)319 (312)317 (309)C out of plane288 M296 (291)296 (292)281 (274)276 (274)294 (290)285 (282)bending CCl2237a240 (236)241 (237)243 (237)243 (239)240 (235)239 (234)rocking CCl2176 S179 (177)180 (177)189 (184)184 (181)180 (176)179 (176)torsion110a99 (98)99 (99)96 (95)94 (94)103 (103)99 (99)MAD16 (16)16 (15)24 (21)25 (20)30 (23)32 (24) C2Br4 stretching C = C1535a1577 (1578)1583 (1585)1599 (1589)1621 (1626)1630 (1632)1631 (1634)stretching asym. CBr2880a867 (869)872 (874)928 (928)930 (930)909 (909)906 (900)stretching asym. CBr2766 S750 (751)755 (756)808 (811)815 (817)803(806)795 (791)stretching sym. CBr2635 S633 (632)636 (635)682 (677)678 (674)660 (660)662 (660)C out of plane464a497 (497)500 (499)511 (506)533 (531)521 (521)518 (514)stretching sym. CBr2265a268 (268)268 (269)281 (281)284 (285)279 (280)281 (280)C out of plane245 S250 (249)250 (249)249 (248)284 (283)251 (252)248 (245)bending CCBr208a212 (212)213 (213)222 (221)222 (221)217 (217)221 (221)bending CBr2188 M190 (189)190 (190)197 (194)202 (201)191 (189)196 (193)bending CBr2144a146 (145)146 (145)149 (147)154 (154)147 (146)152 (151)rocking CBr2119 M117 (117)118 (117)121 (119)127 (127)120 (119)124 (124)torsion66a55 (55)56 (56)57 (56)67 (68)59 (60)57 (54)MAD11 (11)11 (11)26 (24)34 (34)24 (24)25 (23) a IR inactive. Harmonic vibrational frequencies (cm−1) and approximate assignments calculated at different levels of theory for C2F4, C2Cl4 and C2Br4. (DFT calculations were combined with the 6-311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. Experimental information is also included for C2F4, C2Cl4 and C2Cl4 [38]. S, strong; M, medium; W, weak. MAD, mean absolute deviation.) IR inactive. Table 3. Harmonic vibrational frequencies (cm−1) and approximate assignments calculated at different levels of theory for C2F2, C2Cl2, and C2Br2. (DFT calculations were combined with the 6–311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. Experimental information is also included for C2F2 [39,40], and for C2Cl2 and C2Br2 [41]. VS very strong; S, strong; W, weak. MAD, mean absolute deviation.)approximate assignmentsexp.B3LYPX3LYPBMKM06−2XMN15M08-HX C2F2 stretching CC2436a2550 (2550)2557 (2557)2557 (2557)2613 (2616)2590 (2591)2596 (2602)stretching asym. CF1350 VS1369 (1365)1374 (1370)1426 (1424)1412 (1407)1412 (1409)1380 (1373)stretching sym. CF787a800 (797)802 (800)824 (824)822 (819)819 (818)807 (804)bending FCC358 (322)365 (330)380 (343)428 (402)437 (414)429 (399)bending FCC358 (322)365 (330)380 (343)428 (402)437 (414)429 (399)bending FCC270 W287 (281)288 (283)271 (256)304 (301)296 (293)298 (293)bending FCC268 W287 (281)288 (283)271 (256)304 (301)296 (293)298 (293)MAD36 (33)40 (36)48 (52)69 (67)60 (59)54 (51) C2Cl2 stretching CC2234 ± 10a2317 (2318)2323 (2325)2318 (2323)2386 (2388)2362 (2366)2377 (2379)stretching asym. CCl988 ± 2 VS1003 (992)1006 (995)1005 (994)1030 (1026)1030 (1026)1027 (1018)stretching sym. CCl477 ± 10a481 (476)483 (478)480 (475)494 (491)494 (491)492 (487)bending ClCC426 (371)429 (375)432 (365)472 (413)480 (438)483 (409)bending ClCC333 ± 10a426 (371)429 (375)432 (365)472 (413)480 (438)483 (409)bending ClCC186 (179)187 (180)166 (153)184 (181)194 (191)181 (174)bending ClCC172 ± 2 S186 (179)187 (180)166 (153)184 (181)194 (191)181 (174)MAD42 (27)45 (30)42 (30)72 (59)71 (62)71 (53) C2Br2 stretching CC2185a2269 (2270)2276 (2277)2275 (2279)2338 (2336)2310 (2312)2332 (2335)stretching asym. CBr832 VS839 (834)842 (837)871 (866)865 (860)867 (870)875 (874)bending BrCC352 (348)356 (351)366 (359)408 (402)395 (404)398 (388)bending BrCC311a352 (348)356 (351)366 (359)408 (402)395 (404)398 (388)stretching sym. CBr267a290 (289)291 (290)299 (298)299 (297)299 (300)302 (302)bending BrCC142 (144)142 (144)144 (145)174 (180)144 (146)155 (153)bending BrCC137 S142 (144)142 (144)144 (145)174 (180)144 (146)155 (153)MAD32 (31)35 (34)45 (43)70 (69)57 (60)66 (64) a IR inactive. Harmonic vibrational frequencies (cm−1) and approximate assignments calculated at different levels of theory for C2F2, C2Cl2, and C2Br2. (DFT calculations were combined with the 6–311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. Experimental information is also included for C2F2 [39,40], and for C2Cl2 and C2Br2 [41]. VS very strong; S, strong; W, weak. MAD, mean absolute deviation.) IR inactive. Experimental IR spectrum of pure liquid C2Cl4 at room temperature. The previous evaluation shows no important differences between the employed methods, therefore, all of them were used to estimate geometrical parameters and harmonic vibrational frequencies for the C2X3 radicals (with X = F, Cl and Br). Table 4 lists the computed structural parameters, where the aforementioned is also evidenced, and figure 2 presents the molecular geometries for the three radicals with the average values of bond lengths and bond angles. As can be seen, these molecules are planar, with dihedral angles X-C=CX of 0°. The C=C bond lengths are shorter compared to C2X4, while the C-X distances are similar to the C2X4, except when C is attached to a single halogen, in which case they are shorter. In addition, some differences are observed in the X-C=C angles of the C2X3 radicals, expected as a consequence of its asymmetry. Table 4. Structural parameters calculated at different levels of theory for C2X3 with X = F, Cl and Br (bond lengths in Å and angles in degrees). (DFT calculations were combined with the 6–311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. The average of the calculated values are also presented.)parametersB3LYPX3LYPBMKM06-2XMN15M08-HXaverage C2F3 r(C = C)1.311 (1.311)1.310 (1.310)1.313 (1.314)1.308 (1.308)1.309 (1.309)1.308 (1.307)1.309 (1.310)r(C–F)1.324 (1.327)1.323 (1.326)1.311 (1.313)1.314 (1.317)1.315 (1.317)1.319 (1.324)1.318 (1.321)r(C–F)1.317 (1.320)1.316 (1.319)1.305 (1.307)1.309 (1.312)1.310 (1.312)1.313 (1.317)1.312 (1.315)r(C–F)1.302 (1.307)1.300 (1.303)1.291 (1.293)1.297 (1.300)1.295 (1.297)1.298 (1.302)1.297 (1.300)∠(F–C = C)125.0 (125.0)124.9 (125.0)124.8 (124.8)124.8 (124.9)124.9 (124.9)124.8 (124.9)124.9 (124.9)∠(C = C–F)130.0 (129.9)129.9 (129.8)129.1 (129.0)128.7 (128.6)130.0 (129.9)129.7 (129.7)129.6 (129.5)∠(F–C–F)111.7 (111.7)111.7 (111.7)111.8 (111.8)111.8 (111.7)111.7 (111.7)111.7 (111.7)111.7 (111.7) C2Cl3 r(C = C)1.308 (1.307)1.307 (1.306)1.309 (1.308)1.307 (1.306)1.309 (1.306)1.306 (1.305)1.308 (1.307)r(C–Cl)1.739 (1.747)1.738 (1.745)1.743 (1.749)1.723 (1.729)1.718 (1.721)1.723 (1.729)1.731 (1.737)r(C–Cl)1.729 (1.735)1.727 (1.734)1.736 (1.742)1.716 (1.722)1.709 (1.713)1.715 (1.720)1.722 (1.728)r(C–Cl)1.650 (1.658)1.650 (1.658)1.671 (1.680)1.649 (1.656)1.639 (1.645)1.645 (1.652)1.651 (1.658)∠(Cl–C = C)123.2 (123.3)123.2 (123.3)123.1 (123.1)122.8 (122.9)122.6 (122.7)122.5 (122.5)122.9 (123.0)∠(C = C–Cl)138.2 (138.0)138.1 (137.8)135.8 (135.4)135.9 (135.5)136.7 (136.4)136.4 (136.1)136.9 (136.5)∠(Cl–C–Cl)115.6 (115.5)115.6 (115.5)115.6 (115.6)115.9 (115.9)115.6 (115.6)115.9 (115.8)115.7 (115.7) C2Br3 r(C = C)1.300 (1.300)1.300 (1.299)1.304 (1.304)1.301 (1.301)1.301 (1.301)1.301 (1.300)1.301 (1.301)r(C–Br)1.915 (1.916)1.912 (1.914)1.898 (1.901)1.890 (1.892)1.887 (1.885)1.890 (1.893)1.899 (1.900)r(C–Br)1.901 (1.902)1.899 (1.900)1.891 (1.894)1.882 (1.884)1.876 (1.875)1.881 (1.883)1.888 (1.890)r(C–Br)1.814 (1.815)1.813 (1.814)1.815 (1.819)1.809 (1.811)1.796 (1.796)1.805 (1.806)1.809 (1.810)∠(Br–C = C)123.7 (123.8)123.6 (123.7)123.5 (123.6)123.2 (123.2)122.9 (123.0)122.8 (122.7)123.3 (123.3)∠(C = C–Br)140.3 (140.3)140.2 (140.2)138.6 (138.4)137.8 (137.7)138.8 (138.5)137.7 (137.7)138.9 (138.8)∠(Br–C–Br)116.1 (116.0)116.1 (116.1)116.4 (116.4)116.7 (116.7)116.1 (116.1)116.6 (116.6)116.3 (116.3) Structural parameters calculated at different levels of theory for C2X3 with X = F, Cl and Br (bond lengths in Å and angles in degrees). (DFT calculations were combined with the 6–311+G(3df) and aug-cc-pVTZ (in brackets) basis sets. The average of the calculated values are also presented.) Geometrical structures calculated for C2F3, C2Cl3 and C2Br3 with the average parameters from table 4 (interatomic distances in Å and angles in degrees). Tables 5 and 6 show the harmonic vibrational frequencies and IR intensities for the C2X3 radicals (with X = F, Cl and Br), computed employing the aforementioned functionals. Similar results are observed for both used basis sets. The C2X3 radicals exhibit nine vibrational modes, of which seven are movements in the plane of the molecules (four stretching and three bending) and two out of this plane. Furthermore, as it is expected, a decrease in the vibrational frequencies when the halogen mass increases is observed. Table 5. Harmonic vibrational frequencies (cm−1), approximate assignments and infrared intensities (in brackets, in km mol−1) calculated at different levels of theory for C2X3 radicals (with X = F, Cl and Br) coupled with the 6–311+G(3df) basis set. (The average of the calculated values are also presented.)approximate assignmentsB3LYPX3LYPBMKM06-2XMN15M08-HXaverage C2F3 stretching C = C1845 (44)1852 (44)1867 (49)1889 (50)1904 (47)1888 (47)1874 (47)stretching asym. CF21279 (325)1286 (322)1367 (296)1349 (279)1347 (300)1315 (288)1324 (302)stretching CF1226 (266)1232 (270)1301 (324)1281 (302)1286 (311)1254 (297)1263 (295)stretching sym. CF2919 (26)923 (26)959 (23)956 (27)948 (24)938 (27)940 (26)bending FCC620 (1)622 (1)638 (2)632 (2)622 (2)626 (2)627 (2)C out of plane503 (7)507 (7)518 (9)542 (7)547 (7)542 (7)527 (7)bending CF2484 (1)486 (2)498 (2)493 (2)486 (2)489 (2)489 (2)C out of plane259 (0.8)262 (0.7)263 (1)301 (0.01)292 (0.003)292 (0.03)278 (0.4)bending FCC214 (4)215 (4)217 (4)215 (4)202 (4)204 (4)211 (4) C2Cl3 stretching C = C1697 (5)1704 (5)1697 (5)1722 (6)1747 (6)1744 (5)1719 (5)stretching asym. CCl2859 (149)863 (149)939 (134)896 (141)924 (147)934 (128)903 (141)stretching CCl821 (134)825 (133)870 (120)860 (122)878 (124)874 (110)855 (124)stretching sym. CCl2582 (3)585 (3)616 (0.7)608 (2)612 (2)614 (1)603 (2)C out of plane464 (0.03)466 (0.03)461 (0.01)469 (0.01)489 (0.1)481 (0.1)472 (0.05)bending ClCC391 (1)392 (1)397 (0.8)396 (0.9)398 (1)401 (0.7)396 (0.9)bending CCl2263 (0.01)264 (1)262 (0.1)264 (0.1)264 (0.1)263 (0.1)263 (0.2)C out of plane194 (0.9)196 (0.3)195 (0.9)183 (0.6)202 (0.4)190 (0.6)193 (0.6)bending ClCC129 (1)130 (0.3)136 (1)128 (1)130 (1)126 (1)130 (0.9) C2Br3 stretching C = C1683 (4)1688 (4)1674 (4)1717 (3)1724 (4)1729 (4)1703 (4)stretching asym. CBr2722 (115)728 (115)796 (112)784 (107)778 (103)778 (125)764 (113)stretching CBr675 (117)680 (114)721 (99)722 (96)721 (95)725 (100)707 (104)stretching sym. CBr2462 (2)465 (2)491 (0.8)494 (0.8)483 (0.6)492 (0.8)481 (1)C out of plane413 (0.1)416 (0.1)424 (0.1)438 (0.1)439 (0.1)438 (0.1)428 (0.1)bending BrCC240 (0.9)242 (0.9)251 (0.7)251 (0.7)247 (0.9)251 (0.7)247 (0.8)C out of plane160 (1)161 (1)167 (2)178 (1)166 (1)164 (1)166 (1)bending CBr2153 (0.003)153 (0.002)157 (0.001)159 (0.01)154 (0.01)159 (0.002)156 (0.005)bending BrCC80 (0.7)80 (0.7)84 (0.6)87 (0.6)81 (0.6)81 (0.7)82 (0.7) Harmonic vibrational frequencies (cm−1), approximate assignments and infrared intensities (in brackets, in km mol−1) calculated at different levels of theory for C2X3 radicals (with X = F, Cl and Br) coupled with the 6–311+G(3df) basis set. (The average of the calculated values are also presented.) Table 6. Harmonic vibrational frequencies (in cm−1), approximate assignments and infrared intensities (in brackets, in km mol−1) calculated at different levels of theory for C2X3 radicals (with X = F, Cl and Br) coupled with the aug-cc-pVTZ basis set. (The average of the calculated values are also presented.)approximate assignmentsB3LYPX3LYPBMKM06-2XMN15M08-HXaverage C2F3 stretching C = C1843 (43)1850 (44)1858 (49)1890 (51)1898 (48)1891 (48)1872 (47)stretching asym. CF21274 (326)1281 (323)1365 (301)1344 (278)1345 (302)1310 (293)1320 (304)stretching CF1222 (262)1228 (267)1300 (325)1273 (303)1283 (308)1247 (291)1259 (293)stretching sym. CF2916 (26)921 (26)958 (24)952 (27)945 (23)934 (27)938 (26)bending FCC617 (1)619 (1)636 (2)629 (2)620 (2)623 (2)624 (2)C out of plane500 (7)505 (7)511 (8)541 (7)540 (7)537 (7)522 (7)bending CF2483 (1)484 (2)497 (2)493 (2)484 (2)487 (2)488 (2)C out of plane255 (0.9)258 (0.8)257 (1)293 (0.01)288 (0.02)289 (0.02)273 (0.5)bending FCC212 (4)213 (4)216 (4)215 (4)203 (4)205 (4)211 (4) C2Cl3 stretching C = C1699 (5)1704 (5)1691 (0.8)1726 (6)1744 (6)1746 (5)1718 (5)stretching asym. CCl2848 (152)853 (152)936 (138)886 (144)920 (148)921 (130)894 (144)stretching CCl810 (136)815 (135)865 (121)850 (122)872 (125)862 (111)846 (125)stretching sym. CCl2576 (3)579 (3)613 (0.8)603 (2)608 (2)608 (1)598 (2)C out of plane455 (0.004)458 (0.004)451 (0.001)462 (0.0002)478 (0.03)471 (0.02)463 (2)bending ClCC386 (1)387 (1)392 (0.7)391 (0.8)393 (1)394 (0.7)391 (0.9)bending CCl2259 (0.02)260 (0.03)258 (0.1)258 (0.08)259 (0.1)257 (0.1)259 (0.07)C out of plane193 (0.9)194 (0.8)189 (0.8)182 (0.5)201 (0.4)189 (0.6)191 (0.7)bending ClCC128 (1)128 (1)134 (1)124 (1)126 (1)123 (1)127 (1) C2Br3 stretching C = C1686 (4)1691 (4)1670 (5)1719 (4)1723 (4)1732 (4)1704 (4)stretching asym. CBr2719 (114)725 (114)793 (111)777 (105)777 (101)775 (123)761 (111)stretching CBr673 (118)677 (115)719 (99)718 (93)722 (95)722 (100)705 (103)stretching sym. CBr2460 (2)463 (2)490 (0.8)492 (0.7)482 (0.6)490 (0.8)480 (1)C out of plane412 (0.1)415 (0.1)421 (0.1)435 (0.1)438 (0.05)438 (0.09)427 (0.09)bending BrCC240 (0.9)241 (0.9)250 (0.7)249 (0.7)246 (0.9)250 (0.7)246 (0.8)C out of plane160 (1)161 (1)166 (2)181 (1)167 (1)161 (1)166 (1)bending CBr2153 (0.002)153 (0.001)156 (0.002)158 (0.01)153 (0.01)158 (0.005)155 (2)bending BrCC80 (0.7)80 (0.7)84 (0.6)88 (0.5)79 (0.6)80 (0.7)82 (0.6) Harmonic vibrational frequencies (in cm−1), approximate assignments and infrared intensities (in brackets, in km mol−1) calculated at different levels of theory for C2X3 radicals (with X = F, Cl and Br) coupled with the aug-cc-pVTZ basis set. (The average of the calculated values are also presented.) Ultraviolet and visible absorption spectrum The TD-DFT calculations were used to derive the vertical electronic energies, Emax, the associated wavelengths of the band maxima, λmax, and oscillator strengths, f, of the investigated species. In order to select the best models to describe the absorption spectra of this group of molecules, the results were compared against the available experimental information. The electronic supplementary material, tables S1–S6 list, list the results obtained with the B3LYP, X3LYP, BMK, M06-2X, MN15 and M08-HX functionals, combined with the 6–311+G(3df) and the aug-cc-pVTZ basis sets. As it is observed, the use of different basis sets does not significantly affect the excitation energy (or wavelength) and oscillator strength. Also, despite the different generations of exchange and correlation functionals employed, similar results were found and, thus, no approach can be definitely attributed superiority over the other. Therefore, the obtained values were averaged for each species to facilitate the comparison with available experimental and theoretical data. In this way, the TD-DFT average values (with the corresponding standard deviation) of Emax = 8.4 ± 0.2 eV (λmax = 148 ± 5 nm) and f = 0.35 ± 0.05 were obtained for the most intense transition of C2F4. The available experimental information of C2F4 indicates an absorption band over the 185–209 nm range with increasing intensity at shorter wavelengths [43]. This observation is in reasonable agreement with the computed data listed in the electronic supplementary material, tables S1 and S2, with an absorption starting at about 6.5 eV (191 nm). Regarding C2Cl4, the TD-DFT average values of Emax = 5.9 ± 0.1 eV (λmax = 210 ± 8 nm) and f = 0.37 ± 0.01 were derived, corresponding to the most intense absorption. These results are in good agreement with the known experimental information [44–46]. There is another calculated transition with lower intensity at 7.6 ± 0.3 eV that also agrees very well with the reported spectrum [44]. On the other hand, the values derived here for C2Br4 are Emax = 5.6 ± 0.1 eV (λmax = 221 ± 10 nm) and f = 0.31 ± 0.04. They are in excellent agreement with the available experimental information, which depicts an absorption in the range of 216–223 nm with a band maximum at 219.5 nm (5.65 eV) [47]. It can be seen that the energy of the maximum of the most intense band decreases as the halogen changes from F, Cl to Br in C2X4. A similar trend can be observed in the electronic supplementary material, tables S3 and S4, for C2X2, although C2F2 presents an additional intense transition at lower energy. The resultant average values for Emax, λmax and f for C2F2 are 6.8 ± 0.3 eV (λmax = 182 ± 16 nm) with f = 0.05 ± 0.01 and 9.7 ± 0.5 eV (λmax = 127 ± 13 nm) with f = 0.04 ± 0.01. A good agreement is observed with the calculated cross sections for electron collision with difluoroacetylene reported in the study of Gupta et al. [48]. In the case of C2Cl2, the obtained TD-DFT average values are of 8.8 ± 0.4 eV (λmax = 182 ± 14 nm) with f = 0.9 ± 0.4, while for C2Br2, average values of Emax = 8.0 ± 0.3 eV (λmax = 155 ± 11 nm) and f = 1.1 ± 0.3, were derived. As far as we know, there is no experimental UV spectra information about C2X2 and C2X3 (X = F, Cl and Br) species to compare. Based on the results presented above for C2X4, the TD-DFT values derived here seem to be a reasonable approximation. The electronic supplementary material, tables S5 and S6, include all the results for C2F3, C2Cl3 and C2Br3 radicals calculated using different functionals with the 6–311+G(3df) and aug-cc-pVTZ basis sets, while tables 7 and 8 summarize the corresponding average values for the more significant electronic states of C2Xn (with X = F, Cl and Br and n = 2–4). The resulting average values for Emax, λmax and f associated with the band maxima for C2X3 are Emax = 8.1 ± 0.2 eV (λmax = 153 ± 9 nm) and f = 0.13 ± 0.05 for C2F3; Emax = 6.37 ± 0.05 eV (λmax = 195 ± 3 nm) and f = 0.25 ± 0.06 for C2Cl3; and Emax = 6.1 ± 0.1 eV (λmax = 204 ± 9 nm) and f = 0.23 ± 0.06 for C2Br3. As can be seen from the tables, the energy of the maximum of the most intense band is lower when the halogen changes from F, Cl to Br. Furthermore, it is evident that absorption begins at lower energies than the band maximum. The UV absorption of C2F3, C2Cl3 and C2Br3 radicals begins, respectively, at about 6, 5 and 4 eV. Table 7. Vertical excitation energies, E, (eV) and oscillator strengths, f, (in brackets) for the more significant electronic states of C2Xn (X = F, Cl and Br and n = 2–4), calculated using different functionals with the 6–311+G(3df) basis set.speciesB3LYPX3LYPBMKM06-2XMN15M08-HXaverageC2F48.26 (0.3661)8.29 (0.3638)8.56 (0.3995)8.47 (0.3604)8.25 (0.4000)8.37 (0.2557)8.37 (0.36)C2Cl45.73 (0.3551)5.75 (0.3597)6.01 (0.3843)6.01 (0.3862)5.85 (0.3836)6.02 (0.3797)5.90 (0.37)C2Br45.41 (0.2934)5.44 (0.3009)5.67 (0.3465)5.70 (0.3295)5.53 (0.3424)5.73 (0.2050)5.58 (0.30)C2F26.63 (0.0454)6.60 (0.0451)7.06 (0.0639)6.91 (0.0468)7.36 (0.0633)6.51 (0.0412)6.85 (0.05)9.62 (0.0479)9.63 (0.0478)10.12(0.0501)9.97 (0.0481)10.90(0.0396)9.53 (0.0505)9.96 (0.05)C2Cl28.43 (1.0196)8.43 (0.9978)9.38 (1.1159)8.82 (1.1450)9.02 (1.7080)8.52 (0.7023)8.77 (1.11)C2Br27.67 (0.9873)7.68 (0.9758)8.23 (1.3554)8.08 (1.1468)8.25 (1.5974)7.71 (0.7648)7.94 (1.14)C2F38.49 (0.1361)8.48 (0.1592)8.14 (0.1432)7.94 (0.1163)8.03 (0.2049)7.89 (0.0559)8.16 (0.14)C2Cl36.29 (0.2860)6.31 (0.2850)6.40 (0.1667)6.41 (0.3100)6.33 (0.2751)6.40 (0.2894)6.36 (0.27)C2Br35.91 (0.2757)5.93 (0.2804)6.23 (0.2819)6.24 (0.2198)6.13 (0.1686)6.05 (0.1209)6.08 (0.22) Vertical excitation energies, E, (eV) and oscillator strengths, f, (in brackets) for the more significant electronic states of C2Xn (X = F, Cl and Br and n = 2–4), calculated using different functionals with the 6–311+G(3df) basis set. Table 8. Vertical excitation energies, E, (eV) and oscillator strengths, f, (in brackets) for the more significant electronic states of C2Xn (X = F, Cl and Br and n = 2–4), calculated using different functionals with the aug-cc-pVTZ basis set.speciesB3LYPX3LYPBMKM06−2XMN15M08-HXaverageC2F48.24 (0.3353)8.27 (0.3297)8.51 (0.3792)8.46 (0.3376)8.23 (0.3952)8.70 (0.2362)8.40 (0.34)C2Cl45.78 (0.3538)5.81 (0.3592)6.07 (0.3788)6.04 (0.3880)5.90 (0.3827)6.05 (0.3830)5.94 (0.37)C2Br45.40 (0.2886)5.43 (0.2959)5.67 (0.3339)5.70 (0.2839)5.53 (0.3373)5.70 (0.3316)5.57 (0.31)C2F26.59 (0.0438)6.57 (0.0437)6.97 (0.0647)6.92 (0.0469)7.31 (0.0642)6.52 (0.0381)6.81 (0.05)9.15 (0.0371)9.18 (0.0367)9.61 (0.0440)9.61 (0.0370)10.37(0.0354)9.19 (0.0307)9.52 (0.04)C2Cl28.32 (0.7611)8.33 (0.7453)8.82 (0.0549)8.69 (0.8210)9.06 (1.6127)8.26 (0.4736)8.58 (0.75)C2Br27.81 (0.9343)7.81(0.9226)8.54 (1.0977)8.09 (1.1650)8.26 (1.6234)7.69 (0.7440)8.03 (1.08)C2F38.32 (0.1657)8.34 (0.1700)8.06 (0.0764)7.79 (0.0555)7.98 (0.2056)8.05 (0.0705)8.09 (0.12)C2Cl36.31 (0.1730)6.33 (0.2409)6.42 (0.1252)6.44 (0.2971)6.37 (0.2740)6.41 (0.2499)6.38 (0.26)C2Br35.90 (0.2702)5.92 (0.2764)6.22 (0.2842)6.22 (0.2373)6.13 (0.1538)6.17 (0.2103)6.09 (0.24) Vertical excitation energies, E, (eV) and oscillator strengths, f, (in brackets) for the more significant electronic states of C2Xn (X = F, Cl and Br and n = 2–4), calculated using different functionals with the aug-cc-pVTZ basis set. The present TD-DFT analysis of the UV–visible spectra for the C2Xn (X = F, Cl and Br and n = 2–4) species could be useful in both product detection analysis and kinetic studies involving the aforementioned compounds. Thermochemistry Standard enthalpies of formation at 298 K for C2Xn species, where X = F, Cl and Br and n = 2–4, are of great interest for evaluating the enthalpy changes of their possible decomposition channels. The estimate of this property was performed from isodesmic and isogyric reactions [49,50]. In such a procedure, the reactions used correspond to hypothetical processes in which the number of chemical bonds and the spin multiplicities between reactants and products are conserved. Therefore, the systematic errors arising for both deficiencies in the treatment of the electron correlation energy and incompleteness of the basis sets, are largely cancelled [49,50]. In these calculations, the well-established enthalpies of formation at 298 K for the other species involved in the reactions, listed in the electronic supplementary material, table S7, were employed [51]. The electronic supplementary material, tables S8–S10, show the isodesmic and isogyric reactions used along with the computed enthalpy changes and enthalpies of formation for C2Xn, with X = F, Cl and Br and n = 2–4, derived from DFT and high-level composite methods. As can be seen, a greater dispersion is observed between the results derived with the DFT formulations (especially those designed for kinetic studies, listed in the electronic supplementary material, tables S11–S13) compared with the composite methods. For that reason, to perform an average between the G3B3//B3LYP/6–311++G(3df,3pd) and G4//B3LYP/6–311++G(3df,3pd) composited methods seems to be the more realistic decision. A summary of these recommended average values derived here, along with those from literature, is presented in table 9. The errors associated with the present determinations were calculated considering the uncertainties in the used quantum-chemical methods (approx. 4.2 kJ mol−1), those corresponding to the well-established enthalpies of formation of species employed in the isodesmic reactions (the electronic supplementary material, table S7) and the dispersion of the results. Consequently, a conservative error of ±6.3 kJ mol−1 was estimated. Table 9. Enthalpies of formation at 298 K (kJ mol−1).speciesΔHf,298speciesΔHf,298speciesΔHf,298this workliteraturethis workliteraturethis workliteratureC2F4−669.6 ± 3.8−672.8 ± 3.3 [52]C2F20.6 ± 6.35.9 ± 1.3 [52]C2F3−220.9 ± 2.9—C2Cl4−23.0 ± 4.6−24.2 ± 4.0 [53]C2Cl2228.1 ± 2.1226.6 ± 14 [53]C2Cl3230.8 ± 3.8—C2Br4155.3 ± 5.0165.4 [21]C2Br2319.6 ± 5.4318.8 [21]C2Br3375.4 ± 5.9372.04 [22]169.7 [22]335.1 [20]190.0 [20] Enthalpies of formation at 298 K (kJ mol−1). In the case of the C2F2, C2F4, C2Cl2 and C2Cl4 species, enthalpy of formation values are reported [52–55]. For C2F2 and C2F4, values of 5.9 ± 1.3 and −672.8 ± 3.3 kJ mol−1, respectively, were derived from the atomization energy method employing CCSD(T)(FC) geometry optimization with the aug-cc-pVnZ (n = D, T, Q, 5–7) basis sets, followed by single point energy calculation at the CCSD(T) level extrapolated to the complete basis set limit [52]. Earlier results for the enthalpy of formation of C2F4 range between −709.6 ± 8.4 [56] and −653.5 ± 5.4 kJ mol−1 [57]. As can be seen from table 9, the present derived result for C2F4 (−669.6 ± 3.8 kJ mol−1) is in very good concordance with the above-mentioned value obtained by Feller et al. [52] of −672.8 ± 3.3 kJ mol−1, and it also agrees with the dissociation energy reported in the study of the reaction C2F4 (+M) ⇔ CF2 + CF2 (+M) [58]. In the case of C2F2, a slight difference between reported and computed results is found, although both values are fairly similar within the errors of both determinations. For C2Cl4, an enthalpy of formation of −24.2 ± 4.0 kJ mol−1 was estimated by J.A. Manion as an average of reported experimental determinations mainly from reactions that link ΔHf,298(C2Cl4) with enthalpies of formation of chlorinated species as CCl4 and C2HCl5, among others [53]. On the other hand, a value with a relatively large associate error, of 226.6 ± 14 kJ mol−1, is reported for C2Cl2, which was computed from an isodesmic reactions approach at the QCISD(T)/6–311+G(2df,p) level of theory [53]. In both cases, the present results of −23.0 ± 4.6 and 228.1 ± 2.1 kJ mol−1 are in excellent agreement with previously reported values for the chlorinated closed-shell C2Cl4 and C2Cl2 species, respectively, allowing for a reduction of the associated error for the last compound. Furthermore, the estimated enthalpy of formation for C2Cl4 is in agreement with that arising from the dissociation energy calculated by Gómez et al. [14]. For the brominated C2Brn (n = 2–4) species, reported enthalpies of formation are presented without error estimation [20–22,51]. The results derived here are smaller than those previously reported. For C2Br4, values of 190.0 [20], 165.4 [21] and 169.7 kJ mol−1 [22] were predicted at the DK-CCSD(T)/aug-VTZ, G3X and G3B3 levels, respectively. These determinations are higher than the present result of 155.3 ± 5.0 kJ mol−1 derived as an average between the G3B3//B3LYP/6–311++G(3df,3pd) and G4//B3LYP/6–311++G(3df,3pd) methods. However, a good concordance with the enthalpy of formation reported by Wang [21] may be accepted if the associated error is considered. In the case of C2Br2, Oren et al. derived a value of 335.1 kJ mol−1 at the DK-CCSD(T)/aug-VTZ level, but they mentioned that it is probably too high by about 2.1 kJ mol−1 [20]. Wang reported a different enthalpy of formation of 318.8 kJ mol−1 computed at the G3X method [21]. As can be seen from table 9, the result derived here falls within the range of the previous determinations and, again, compares satisfactorily with the estimation at the G3X level. For the C2Br3 radical, the present value of 375.4 ± 5.9 kJ mol−1 is very close to that reported by Burcat et al. [22], of 372.04 kJ mol−1. A much higher value of 385.4 kJ mol−1 is also available in the literature [20]. Additionally, estimations of the errors for the corresponding enthalpies of formation for brominated compounds are also provided. Finally, accurate enthalpies of formation for the C2F3 and C2Cl3 reactive radicals were predicted for the first time, with values of −220.9 ± 2.9 and 230.8 ± 3.8 kJ mol−1, respectively. Figure 3 depicts the computed differences (Diff) between enthalpies of formation of C2Xn species (X = F, Cl and Br and n = 2–6) when bromine atoms are replaced by chlorine or fluorine atoms, and when chlorine atoms are changed by fluorine atoms, as a function of the total number of halogen atoms. For example, Diff = ΔHf,298(C2Brn) - ΔHf,298(C2Cln) for the first case. The graphic includes enthalpy of formation values derived in this work (table 9), along with the following information for the C2X5 and C2X6 species (in kJ mol−1): −894.4 ± 2.8 (C2F5), −21.3 ± 5.4 (C2Cl5), 183.3 (C2Br5), −1344.3 ± 3.4 (C2F6), −148.2 ± 5.7 (C2Cl6), and 165.5 (C2Br6) [51]. The very good fit of these representations (with r2 values better than 0.9) shows that the enthalpies of formation recommended in this work follow the trend observed in the available literature values. Differences between enthalpies of formation for C2Xn species (X = F, Cl and Br and n = 2–6) when (black circles, ●) bromine atoms are replaced by chlorine atoms, (grey circles, ●) bromine atoms are changed by fluorine atoms, and (open circles, ○) chlorine atoms are substituted by fluorine atoms. Atmospheric implications Standard enthalpies of formation previously derived for C2Xn species (X = F, Cl and Br and n = 2–4) enable the evaluation of both combustion and atmospheric degradation processes. In the atmospheric context, the C2Cl3 radical is of particular interest. Reactions of C2Cl3 with O2 [7,8] and NO2 [9,59] are well known. In the case of the reaction between the C2Cl3 radical and O2, several exothermic reaction channels were identified. Specifically, the reaction proceeds through a barrierless addition to form the chlorinated vinylperoxy radical, C2Cl3OO [7,8]. This species can decompose or isomerize to generate various reaction products, such as Cl2CO, ClCO, CCl3CO, CO and CO2, among others [7]. Similarly, four reaction channels were proposed for the C2Cl3 + NO2 reaction, forming products such as C2Cl3O, CCl3CO, CCl3, ClCNO, Cl2CO, CO and NO [9]. Once again, the formation of a possible reaction intermediate, C2Cl3NO2, followed by isomerization to C2Cl3ONO, was found in a theoretical study [59]. However, the major degradation process is most likely its oxidation reaction initiated by OH radicals, although the reaction with NO, which reacts rapidly with hydrocarbon radicals [60], may also play a significant role in polluted atmospheres. In these reactions, the formation of an addition adduct is possible, which can lead to the generation of different products. In fact, an analogy can be performed between the reactions of C2H3 with OH radicals and with NO [61–63], and those corresponding to the C2Cl3 radical. For this reason, the initial formation of the C2Cl3OH adduct was considered for the C2Cl3 + OH reaction. At the G4//B3LYP/6–311++G(3df,3pd) level of theory, employing the total atomization energy (TAE) [64] to estimate ΔHf,298(C2Cl3OH) = −178.6 kJ mol−1 and the value of −37.492 ± 0.026 kJ mol−1 for the OH radical [51], a reaction enthalpy of −446.9 kJ mol−1 was derived at 298 K for the formation of C2Cl3OH. Three probable decomposition pathways for this species can yield Cl2C=CClO + H, Cl2C=O + HCCl and ClCOH + CCl2, among others. Additionally, direct Cl atom abstraction from the OH radical to produce C2Cl2 and ClOH can also be considered, without the formation of an adduct. Reaction enthalpies at 298 K of −157.7, −169.8, −27.8, and −115.0 kJ mol−1 were derived, respectively, for the reactions C2Cl3 + OH → Cl2C=CClO + H, C2Cl3 + OH → Cl2C=O + HCCl, C2Cl3 + OH → ClCOH + CCl2 and C2Cl3 + OH → C2Cl2 + ClOH, using the following values for enthalpies of formation (in kJ mol−1): −107.4 for CCl2=CClO (from TAE), 217.997 ± 0.001 for H [51], −220.9 for Cl2C=O [51], 319.4 ± 0.8 for HCCl [51], −74.8 ± 1.2 for ClOH [51], 11.1 ± 2.5 for ClCOH [65], and 229.4 ± 0.8 for CCl2 [51]. In the case of C2Cl3 + NO reaction, two possible addition adducts were considered: C2Cl3NO and C2Cl3ON. The enthalpies of formation at 298 K for these adducts were estimated to be 136.8 and 299.7 kJ mol−1, respectively, from total atomization energies at the G4//B3LYP/6–311++G(3df,3pd) level. These results, along with the enthalpy of formation of 91.090 ± 0.062 kJ mol−1 for NO [51], lead to reaction enthalpies at 298 K of −185.1 and −22.2 kJ mol−1, indicating greater stability for the C2Cl3NO adduct. Once again, this adduct may decompose to form Cl2C=NCl + CO, Cl2C=O + ClCN, among other products. Also, it is possible a reaction to form ClNO and C2Cl2 through Cl atom abstraction from NO. The corresponding reactions C2Cl3 + NO → Cl2C=NCl + CO, C2Cl3 + NO → Cl2C=O + ClCN and C2Cl3 + NO → ClNO + C2Cl2, show reaction enthalpy values at 298 K of −343.0, −413.4 and −39.5 kJ mol−1, respectively, calculated employing the following enthalpy of formation values (in kJ mol−1): 89.4 for Cl2C=NCl (from TAE), −110.523 ± 0.026 for CO [51], −220.9 for Cl2C=O [51] and 129.4 kJ mol−1 for ClCN (from TAE). As can be seen, all the processes evaluated here are highly exothermic, suggesting that C2Cl3 reacts rapidly with both OH and NO. The identification of the possible transition states connecting the adducts to the different products is still required to fully elucidate the reaction mechanisms. Nevertheless, it is clear that barrierless addition reactions leading to the formation of the corresponding adducts result in highly exothermic processes. Conclusions The present study provides accurate structural and thermochemical data of the C2X3 radicals and the related closed-shell molecules C2X4 and C2X2 (with X = F, Cl and Br). These findings also allowed us to validate the employed methods. The computed equilibrium structures and harmonic vibrational frequencies for C2X4 and C2X2 exhibited a very good agreement regarding previous literature data for all functionals employed. Notably, the B3LYP method shows the smallest MAD from experimental values. Additionally, a detailed TD-DFT analysis of the UV–visible spectra of the studied species was performed, and the values derived in this study for C2X3 and C2X2 represent a reasonable approximation in the absence of experimental information. In the case of C2Cl4, the computed IR spectrum was compared against the experimental results determined here. Structural and spectroscopic characterization of the C2F3, C2Cl3 and C2Br3 radicals, along with the estimation of the enthalpies of formation of C2F3 and C2Cl3 were presented here for the first time, to our knowledge. Recommended enthalpies of formation at 298 K were derived by averaging results from the G3B3//B3LYP/6–311++G(3df,3pd) and G4//B3LYP/6–311++G(3df,3pd) composited methods. For C2F4, C2F2, C2Cl4 and C2Cl2, the obtained values of −669.6 ± 3.8, 0.6 ± 6.3, −23.0 ± 4.6 and 228.0 ± 2.1 kJ mol−1, show highly satisfactory agreement with previous determinations. In the case of brominated compounds, C2Br4, C2Br3 and C2Br2, enthalpies of formation of 155.3 ± 5.0, 375.4 ± 5.9 and 319.6 ± 5.4 kJ mol−1 were calculated, which are lower than those previously reported without error estimation. Finally, accurate enthalpies of formation were computed for the first time, to our knowledge, for the C2F3 and C2Cl3 radicals, with values of −220.9 ± 2.9 and 230.8 ± 3.8 kJ mol−1, respectively. These data can be helpful in future experimental measurements and theoretical determinations. In that sense, some accessible reaction channels for the reactions of C2Cl3 with OH radicals and with NO are briefly discussed. Contributor Information María Liz Ferreira, Email: ferreiram@quimfa.com.py. Franco Ignacio Dubois, Email: francodubois@quimica.unlp.edu.ar. María Eugenia Tucceri, Email: mtucceri@inifta.unlp.edu.ar. María Paula Badenes, Email: mbadenes@inifta.unlp.edu.ar. Ethics This work did not require ethical approval from a human subject or animal welfare committee. Data accessibility Dataset files with input matrices for all species used in the work [66]. Supplementary material is available online [67]. Declaration of AI use We have not used AI-assisted technologies in creating this article. Authors’ contributions M.L.F.: formal analysis, investigation; F.I.D.: formal analysis, investigation; M.E.T.: conceptualization, formal analysis, funding acquisition, investigation, methodology, project administration, supervision, writing—original draft, writing—review and editing; M.P.B.: conceptualization, formal analysis, funding acquisition, investigation, methodology, project administration, supervision, writing—original draft, writing—review and editing. All authors gave final approval for publication and agreed to be held accountable for the work performed therein. Conflict of interest declaration We declare we have no competing interests. Funding This work was supported by the Universidad Nacional de La Plata (11/X919, EX004); the Consejo Nacional de Investigaciones Científicas y Técnicas CONICET (PUE 22920170100100CO, PIP 11220210100894CO); and the Agencia Nacional de Promoción Científica y Tecnológica (PICT 2018- 3738). References Associated Data Data Availability Statement Dataset files with input matrices for all species used in the work [66]. Supplementary material is available online [67].