Supported phenylalanine on core-shell mesoporous microsphere as a catalyst for the synthesis of triazolo[1,2-a] indazole-triones and spiro triazolo[1,2-a] indazole-tetraones Authors: Mahnaz Mirheidari, Ali Kareem Abbas, Javad Safaei-Ghomi Published: 2024 ABSTRACT In recent years, mesoporous silica materials have gained attention due to their unique properties, such as high surface area, pore volume, size, and chemical stability. These characteristics make them effective in various fields, particularly efficient supports in heterogeneous catalytic reactions. The present study developed a novel type of core-shell mesoporous microsphere material by anchoring phenylalanine on a core-shell SiO2@NiO@MS support. The catalyst support (SiO2@NiO@MS) was synthesized through homogeneous precipitation and sol-gel methods, with NiO encapsulated within the porous silica. The catalyst was characterized using various techniques, including Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS), Elemental mapping analysis, N2 adsorption-desorption, Transmission electron microscopy (TEM), Vibrating sample magnetometer (VSM), and Thermogravimetric analysis (TGA). It was then employed for the synthesis of triazolo[1,2-a]indazole-trione and spiro triazolo[1,2-a]indazole-tetraones compounds from 4-phenyl urazole, dimedone, and aromatic aldehydes or isatin derivatives. This synthetic approach offers multiple advantages, including high yields, faster reaction times, low catalyst requirements, and environmentally sustainable conditions.Supplementary InformationThe online version contains supplementary material available at 10.1038/s41598-024-78018-w. Introduction Core–shell nanostructures have garnered significant attention due to their multi-functionality provided by the multiple layers of coating, which can modify the structure’s properties1–3. These layers can change the chemical properties, enhance stability against aggregation, and improve the catalytic activity of the inner core. Additionally, increasing the number of shells can expand the materials’ applications in various fields, such as catalysis, medicine, and treatment4–7. Organic–inorganic hybrid heterogeneous porous material with distinct structures, specific surface areas, and open-pore architectures play a crucial role in various fields such as ion exchange, life sciences, adsorption and separation, and catalysis8–12. Mesoporous ordered silica, with its hexagonal structure, exhibits notable characteristics such as adjustable pore size, high porosity, thick walls, and excellent thermal and chemical stability. These properties make it well-suited for applications in drug delivery systems, catalysis, and separation processes9,13–15. Generally, silica is more biocompatible than other metal oxide nanoparticles, like iron and titanium oxide, and is more commonly found in the environment16. The rigid structure of silica does not swell on the solvents, this benefit causes the silica can be used in low and high temperatures17. Since silica is chemically inert with mechanical and thermal stability, it has been used as an attractive inorganic support materials18 to provide new compounds19. On the other hand, nickel oxide nanoparticles as transition metal oxides have attracted considerable attention due to their unique characteristics such as magnetic, electrical, and optical properties20,21. They have different applications in catalysis22, electronic compounds20, and sensors23. Also, recent studies have shown the importance of NiO nanoparticles in biomedical applications such as cancer treatment21. The combination of silica with nickel oxide nanoparticles can enhance adsorption capacity and catalytic activity, while also improving thermal conductivity, magnetic properties, and corrosion resistance24–26. It is crucial to design mesoporous silica nanoparticles with an appropriate surface to enable effective molecule loading. The presence of silanol (Si–OH) groups on the surface of mesoporous silica allows for covalent bonding with other guest organic groups, such as organocatalysts27. Amino acids with chiral structures are commonly used as organocatalysts in various reactions, including Michael reactions, epoxidation, and aldol reactions28,29. These compounds are inexpensive and do not require specific methods to carry out catalytic reactions30–32. Organic catalytic reactions have emerged as powerful synthetic tools for the synthesis of highly functionalized compounds. Eco‐friendly and economically heterogeneous catalysts to activate organic functional group transformations are useful and in high demand by academic laboratories and industries33–36. Organic reactions using heterogeneous catalysts are extremely important for the development of sustainable chemical processes. Over the past few decades, multicomponent reactions (MCRs) have become popular in organic chemistry due to their many advantages such as green reaction conditions, speed, efficiency, and atom economy37–43. Nitrogen-based heterocyclic compounds as an important analog of organic chemistry have attracted the attention of many researchers because of their biological applications and other scientific uses44–46. Research results have shown that compounds with urazole moiety like Triazolo[1,2-a] indazole-trione compounds possess considerable biological and medical activities such as anticancer, anticonvulsant, and hypolipidemic47–50. Up to date, Triazolo[1,2-a]indazole-trione and spiro triazolo[1,2-a]indazole-tetraones compounds have been synthesized through different preparation routes and different catalysts such as ZnO@SiO251, SBA-15-Ph-SO3H52, p-TSA53, FeNi3/quinuclidine54, Origanum-majorana Ag NPs55, which some methods have problems such as long reaction times, low yields51, and toxic solvent56. Based on the above information and our research aimed at addressing these issues, we have designed and synthesized SiO2@NiO@MS-Phenylalanine as a new recyclable bifunctional catalyst. This catalyst offers high efficiency and stability for the rapid and straightforward synthesis of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraone compounds under solvent-free conditions. Experimental section Substances and methods All organic compounds were purchased commercially from Sigma-Aldrich and Merck. The melting point of products was measured by Electrothermal 9200. FT-IR measurements were carried out on a Nicolet Magna-IR 550 spectrometer using KBr plates. 1H NMR data were recorded in DMSO-d6 on a Bruker Avance DRX instrument. XRD patterns were obtained by using X’PertPro (Philips, PW 1510, Netherlands) instrument. Thermal analysis was carried out on a Bahr STA type. The scanning electron microscopy (FE-SEM) and energy-dispersive X-ray analysis were carried out by (MIRA3-TESCAN FESEM). The transmission electron microscopy (TEM) image analysis was carried out used Zeiss-EM10C-100 kV. The magnetic properties of samples were measured using a vibrating-sample magnetometer (VSM) (Meghnatis Daghigh Kavir Co.; Kashan Kavir; Iran). The N2 adsorption/desorption was measured at 77 K using an automated gas adsorption analyzer (BELSORP-mini, Japan). Catalyst preparation The mixture of distilled water (20 ml) and ethanol (50 ml) was sonicated for 30 min. Then, 3 ml TEOS and 0.1 mmol PVP were dissolved into the mixture under stirring. After that, ethylenediamine (0.1 ml) was added to the solution as a precipitating agent under ultrasonic irradiation. After 30 min, the resulting SiO2 was isolated by centrifugation and washed with ethanol and water thrice. The final product was dried overnight at 80 °C57. Then, Nickel (II) Nitrate Hexahydrate (5 mmol) and urea (33.3 mmol) were dispersed into deionized water (20 ml) under ultrasonic dispersion. Thereafter, dispersed silica nanoparticles in water (100 mg SiO2 in 20 ml deionized water) were slowly added to the above-prepared mixture while they were stirring at 70 °C, and kept stirring for 5h. The obtained product was washed with ethanol and water several times and dried at 60 °C overnight to get a pure solid58. Core–shell structured SiO2@NiO@MS mesoporous microspheres were synthesized using a co-surfactant templating approach. CTAB (0.019 g) and P123 (0.38 g) were dissolved in 130 ml HCl to form a uniform clear solution. Then, 0.15 g of as-prepared SiO2@NiO was added to the above mixture and sonicated for 30 min to achieve a homogeneous mixture. Then, 0.15 g of TEOS was added dropwise to the mixture under stirring over 15 min at 40 °C and then kept stirring for an additional 24h. The resulting microsphere product was centrifuged and washed three times with ethanol and water. Next, the obtained sample and 40 ml of HCl aqueous solution (pH = 2) were transferred into the Teflon autoclave for further hydrothermal treatment and heated at 100 °C for 24 h. Again, the obtained product was collected by centrifugation and washed with distilled water several times, and dried at 100 °C overnight. In the end, to remove the template, the final product was calcined at 550 °C for 6 h. In the next step, 3-chloropropyl triethoxysilane (CPTES) (0.5 ml, 5 mmol) was added dropwise over 10 min to a stirred suspension of SiO2@NiO@MS (0.5 g) in dry toluene (15 ml) and refluxed for 24 h. Then, the obtained solid was collected from the solution by centrifugation and washed three times with toluene. In the end, it was dried in a vacuum oven at 120 °C for 8 h to afford the white powder as SiO2@NiO@MS@CPTES solid. In the end, in a 50 ml round-bottom flask, phenylalanine (0.8 g, 5 mmol) was added to the suspension of SiO2@NiO@MS@CPTES (0.5 g) in absolute ethanol (30 ml) and refluxed for 24 h. The obtained insoluble solid was collected by filtration washed with ethanol several times and dried overnight at 90 °C to obtain the final chiral catalyst. General procedure of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraones compounds In a 50 ml round-bottom flask, dimedone (1 mmol), 4-phenyl urazole (1 mmol), aromatic aldehydes or isatin derivatives (1 mmol) and 18 mg of the catalyst (SiO2@NiO@MS-phenylalanine) were placed and mixed at 40 °C under solvent-free conditions until the completion of the reaction (the development of reaction was monitored by TLC). The reaction mixture was separated from the catalyst by dissolving in hot ethanol and the nano catalyst was separated by centrifugation. The solvent was removed and the product was washed with ethanol and then dried to get the pure compounds. Spectral data for 6,6-Dimethyl-2-phenyl-6,7-dihydro-1H-spiro[[1,2,4]triazolo[1,2-a]indazole-9,30-indoline]-1,20,3,8(2H,5H)-tetraone (4g): orange powder; IR (KBr,cm-1): 3439 (N–H), 2957 (CH stretch), 1782, 1726, 1665 (C = O stretch), 1622 (C = C stretch); 1H NMR (DMSO-d6, 400 MHz) δ (ppm): 10.93 (s, NH), 7.53- 7.50 (m, 2H, Ar–H), 7.48- 7.42 (m, 4Hz, Ar–H), 7.31.7.28 (t, J = 12 Hz, 1H, Ar–H),7.28–6.98 (t, J = 16 Hz, 1H, Ar–H), 6.91–6.89 (d, J = 8 Hz, 1H, Ar–H), 2.95 (s, 2H, CH2), 2.22–2.18 (d, J = 16 Hz, 1H, CH2), 2.08–2.04 (d, J = 16 Hz, 1H, CH2), 1.13 (s, 3H, CH3), 1.09 (s, 3H, CH3). Results and discussion Structural analysis of the SiO2@NiO@MS-phenylalanine To prepare the new catalyst, the silica surface was first covered by Nickel oxide. Then, to increase the surface and thermal and chemical stabilities of the catalyst, mesoporous silica was immobilized on the SiO2@NiO surface. Mesoporous silica materials have hydroxyl groups on their surface that can form a strong bond with other functional groups. SiO2@NiO@MS nanoparticles with hydroxyl groups were functionalized by the Phenylalanine to form a new efficient bifunctional catalyst in the final step (Scheme 1).Scheme 1General scheme to prepare SiO2@NiO@MS-Phenylalanine. General scheme to prepare SiO2@NiO@MS-Phenylalanine. Figure 1 shows the IR spectra for every step of the catalyst preparation. For spherical SiO2, the characteristic peaks at 1097 and 802 cm-1 are attributed to the asymmetry and bending vibrations of Si–O–Si. The adsorption at 961 cm-1 is due to the Si–OH vibrations. The bands at 1628 and 3431 cm-1 are related to bending and stretching vibrations of hydroxyl groups in the structure of SiO259. In the SiO2@NiO, the adsorption peaks at around 3297 cm-1 and 1090 cm-1 are associated with O–H and Si–O–Si vibrations. The broad peak in the reign of 450–600 cm-1 is related to Ni–O vibrations60. The formation of SiO2@NiO@MS step is also proved with similar characteristic peaks at 3400 and 1085 cm-1. In the IR spectrum of SiO2@NiO@MS-Cl, the bands at 2850 cm-1 and 2925 cm-1 are indexed to the CH2 stretching vibrations. The IR spectrum for SiO2@NiO@MS-phenylalanine shows the peak at 1625 cm-1 for asymmetric vibrations of the carboxylate group in phenylalanine. Also, The peak at 1564 cm-1 is due to the stretching vibration mode for C–C bonds in the aromatic ring of phenylalanine61 which confirms the successful immobilization of phenylalanine on the SiO2@NiO@MS.Fig. 1IR spectra for each step of the catalyst preparation. IR spectra for each step of the catalyst preparation. Figure 2 shows the XRD diffraction pattern of SiO2, SiO2@NiO, and SiO2@NiO@MS-phenylalaninne. The X-ray diffraction pattern for SiO2 shows the broad peak at about 2θ = 25° that confirms the amorphous structure of SiO2 that follows references62. After covering of spherical silica nanoparticles by the NiO, the intensity of the peaks for SiO2 decreases which approves prosperous covering of SiO260. Also, the peaks at 2θ = 37°, 43°, 63o, and 75° are due to the reflections from planes of (1 1 1), (2 0 0), (2 2 0), (3 1 1), and (2 2 2) in NiO nanoparticles. The XRD pattern for the final catalyst step also shows the above-mentioned peaks with the reduced intensity that ratify the functionalization of the SiO2@NiO@MS by phenylalanine.Fig. 2XRD patterns for SiO2, SiO2@NiO, and SiO2@NiO@MS-Phenylalanine. XRD patterns for SiO2, SiO2@NiO, and SiO2@NiO@MS-Phenylalanine. The FE-SEM and TEM techniques were used to study the morphology of the catalyst (Fig. 3). Figure 3a shows the spherical structure of SiO2 with uniform morphology without agglomeration. In the SEM image of SiO2-NiO, NiO nanoparticles with petal-like morphology grow on a silica surface (Fig. 3b)63. Also, the final catalyst shows a uniform spherical morphology (Fig. 3c). The TEM image was applied to show more details of the catalyst structure. The image of the SiO2@NiO@MS-Phenylalanine catalyst precisely exhibits the core–shell microsphere with a mesoporous shell in the outer layer of the catalyst with a fine dispersion and hexagonal symmetry (Fig. 3d).Fig. 3FE-SEM for spherical SiO2 (a), SiO2@NiO (b), SiO2@NiO@MS-Phenylalanine (c), and the TEM image of the SiO2@NiO@MS-Phenylalanine (d). FE-SEM for spherical SiO2 (a), SiO2@NiO (b), SiO2@NiO@MS-Phenylalanine (c), and the TEM image of the SiO2@NiO@MS-Phenylalanine (d). The EDX spectra for the SiO2@NiO@MS and SiO2@NiO@MS-Phenylalanine approve the presence of all elements involved in both two steps of catalyst preparation (Fig. 4a, b). Also, elemental mapping analysis for SiO2@NiO@MS (Fig. 5a) and SiO2@NiO@MS-phenylalanine show the uniform distribution of the elements in the catalyst (Fig. 5b).Fig. 4EDS analysis for SiO2@NiO@MS (a) and SiO2@NiO@MS-Phenylalnine (b).Fig. 5Elemental mapping analysis for SiO2@NiO@MS (a) and SiO2@NiO@MS-Phenylalanine (b). EDS analysis for SiO2@NiO@MS (a) and SiO2@NiO@MS-Phenylalnine (b). Elemental mapping analysis for SiO2@NiO@MS (a) and SiO2@NiO@MS-Phenylalanine (b). The surface area and porosity of the SiO2@NiO, SiO2@NiO@MS, and SiO2@NiO@MS-phenylalnine were investigated by the nitrogen adsorption–desorption measurements. The N2 adsorption/desorption isotherm for SiO2@NiO demonstrates the IV-type isotherm with a hysteresis loop in the relative pressure range of 0.5–1 (Fig. 6a). The BET surface area and pore volume are 44.528 m2/g and 0.28 cm-3/g. The BJH diagram also shows a multimodal pore size distribution composed of mesopore and macropore forms (Fig. 7a). The N2 adsorption–desorption curves for SiO2@NiO@MS and SiO2@NiO@MS-phenylalanine according to the IUPAC classification exhibit the type IV isotherms which are typical for mesoporous silica structures. Furthermore, an H1 hysteresis loop for the final catalyst indicates the tubular pores. The reduction in the value of surface area and pore volume from 110.35 m2/g and 0.19 cm3 for SiO2@NiO@MS to 70.741 m2/g and 0.16 cm3 for SiO2@NiO@MS-phenylalanine are related to surface functionalization and obstruction in the entrance of the pores (Fig. 6b, c). The BJH diagrams for SiO2@NiO@MS and SiO2@NiO@MS-phenylalanine exhibit the meso-structures for these layers (Fig. 7b, c).Fig. 6BET graphs for SiO2@NiO (a), SiO2@NiO@MS (b), and SiO2@NiO@MS-Phenylalanine (c).Fig. 7BJH pore distribution for SiO2@NiO (a), SiO2@NiO@MS (b), and SiO2@NiO@MS-Phenylalanine (c). BET graphs for SiO2@NiO (a), SiO2@NiO@MS (b), and SiO2@NiO@MS-Phenylalanine (c). BJH pore distribution for SiO2@NiO (a), SiO2@NiO@MS (b), and SiO2@NiO@MS-Phenylalanine (c). To get more data on the catalyst properties, the magnetic properties in different process steps of catalyst synthesis were measured by VSM (Fig. 8). The saturation magnetization (MS) of SiO2@NiO is 0.35 emu/g (Fig. 8a) which shows a weak ferromagnetic state. SiO2@NiO@MS and SiO2@NiO@MS-Phenylalanine have also ferromagnetic behaviors which the values of MS for both are 0.2 and 0.14 emu/g, respectively (Fig. 8b, c). The decline in magnetization behaviors is associated with the presence of the diamagnetic structure of SiO2 and organic groups in their structure.Fig. 8VSM curves for SiO2@NiO (a), SiO2@NiO@MS (b), and SiO2@NiO@MS-Phenylalanine (c). VSM curves for SiO2@NiO (a), SiO2@NiO@MS (b), and SiO2@NiO@MS-Phenylalanine (c). The thermal gravimetric analysis (TGA)/Differential thermal analysis (DTA) for the catalyst displays a slight mass loss (5%) that continues up to around 230 °C which is due to the removal of adsorbed water, hydroxyl groups on the silica surface and surfactants (P123)64. The second weight loss at the temperature range of 230 °C to 410 °C is related to the removal of organic groups from the surface. The SiO2@NiO@MS-Phenylalanine demonstrates remarkable thermal stability, maintaining its structural integrity up to around 300 °C. The exothermic peak at around 700 °C corresponds to the oxidizing surface of the silica65 (Fig. 9).Fig. 9TGA/DTA curve for SiO2@NiO@MS-Phenylalanine. TGA/DTA curve for SiO2@NiO@MS-Phenylalanine. Optimization the reaction To show the superior catalytic performance of SiO2@NiO@MS-Phenylalanine and find the optimized reaction conditions to get the best result, various factors consisting of catalyst, solvent, temperature, and amount of the catalyst were evaluated on the model reaction between isatin, 4-phenylurazole, and dimedone. Different catalysts were tested in the reaction and the results revealed the reaction in the presence of SiO2@NiO@MS-Phenylalnine has the best consequence. The efficiency of different solvents, amount of catalyst, and temperature also exhibited the reaction in the presence of SiO2@NiO@MS-Phenylalnine catalyst (18 mg) under the solvent-free condition at 40 °C make the product in high yield. To further evaluate the catalytic efficiency of SiO2@NiO@MS-Phenylalanine, a comparison was made with various catalysts previously reported in the literature for the synthesis of 6,6-dimethyl-9 (4-chlorophenyl)-2-phenyl-5,6,7,9-tetrahydro-1H,8H-[1,2,4]triazolo[1,2-a] indazole-1,3,8(2H)-trione and 6’,6'-dimethyl-2'-phenyl-6',7'dihydro-1'H-spiro[indoline-3,9'-[1,2,4]triazolo[1,2-a]indazole]-1',2,3',8'(2'H,5'H)-tetraone. some methods have problems such as toxic solvents, use of homogeneous catalysts, and higher temperatures. This catalyst provides high efficiency and stability for the fast and simple synthesis of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraone compounds without the use of solvents (Table 1). The results related to the synthesis of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraones compounds in the presence of aryl aldehyde and isatin derivatives under optimized conditions are grouped in Table 2.Table 1The optimized reaction conditions for the synthesis of 6,6-dimethyl-9-(4-chlorophenyl)-2-phenyl-5,6,7,9-tetrahydro-1H,8H-[1,2,4]triazolo[1,2-a]indazole-1,3,8(2H)-trione (entries 1–15) and 6’,6'-dimethyl-2'-phenyl-6',7'-dihydro-1'H-spiro[indoline-3,9'-[1,2,4]triazolo[1,2-a]indazole]-1',2,3',8'(2'H,5'H)-tetraone (entries 16–19) compounds.EntryCatalyst (mg)Reaction conditionsTime (min)Yielda (%)References1SiO2 (18 mg)Solvent-free/90 °C21051This work2NiO (18 mg)Solvent-free/90 °C18057This work3ZnO (18 mg)Solvent-free/90 °C18065This work3SiO2@NiO@MS (18 mg)Solvent-free/90 °C21080This work4Phenylalanine (18 mg)Solvent-free/90 °C25052This work5P-TsOH (18 mg)Solvent-free/90 °C21061This work6SiO2@NiO@MS-Phenylalanine (18 mg)Toluene/70 °C12074This work7SiO2@NiO@MS-Phenylalanine (18 mg)Water/80 °C4583This work8SiO2@NiO@MS-Phenylalanine (5 mg)Solvent-free/90 °C15071This work9SiO2@NiO@MS-Phenylalanine (8 mg)Solvent-free/90 °C9075This work10SiO2@NiO@MS-Phenylalanine (13 mg)Solvent-free/90 °C3084This work11SiO2@NiO@MS-Phenylalanine (18 mg)Solvent-free/40 °C1397This work12SiO2@NiO@MS-Phenylalanine (18 mg)MeCN/60 °C12077This work13Guanidinium-based sulfonic (10 mol %)H2O/Reflux150876614GO/SiO2/Co (II) (20 mg)Solvent-free/90 °C12975715Fe3O4@SiO2@(CH2)3-1H-1,2,4- triazole-3-thioSolvent-free/100 °C20946716SiO2@NiO@MS-Phenylalanine (18 mg)Solvent-free/40 °C1794This work17Iron (III) chloride (16.2 mg)CH3CN/Reflux90854918GO/SiO2/Co (II) (20 mg)Solvent-free/90 °C19935719PEG-SO3H (10 mol %)Solvent-free/80 °C3608953aIsolated yield.Table 2Synthesis of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraonesa.EntryNameStarting Aldehydes/IsatinsTime (min)Yieldb (%)TOFTONMP °CMP °CRefs.14a2,4 dichlorobenzaldhyde1091162.5 h-126194–197196–1976824b4-NO2 benzaldehyde1396121.3 h-127.4177–178176–1786834cbenzaldehyde209788.18 h-127.7160–162162–1636844d3-NO2 benzaldehyde1097173.2 h-127.7131–132130–1326654e4-Cl benzaldehyde1397129.3 h-127.7172–174169–1716864f.4-Me benzaldehyde218974.1 h-125.4164–166163–1645374gisatin179495.9 h-126.8295–298298–3005384h5-NO2 isatin1094167.85 h-126.8230–232-94i5-Br isatin1395126.6 h-127.1293–294292–29353104j5-CH3 isatin1590103.4 h-125.7305–306308–31053aReaction conditions: dimedone (1 mmol), 4-phenyl urazole (1 mmol), aromatic aldehyde or isatin derivatives (1 mmol), SiO2@NiO@MS-Phenyl alanine (18 mg), solvent-free (40 °C).bIsolated yield. Table 1The optimized reaction conditions for the synthesis of 6,6-dimethyl-9-(4-chlorophenyl)-2-phenyl-5,6,7,9-tetrahydro-1H,8H-[1,2,4]triazolo[1,2-a]indazole-1,3,8(2H)-trione (entries 1–15) and 6’,6'-dimethyl-2'-phenyl-6',7'-dihydro-1'H-spiro[indoline-3,9'-[1,2,4]triazolo[1,2-a]indazole]-1',2,3',8'(2'H,5'H)-tetraone (entries 16–19) compounds.EntryCatalyst (mg)Reaction conditionsTime (min)Yielda (%)References1SiO2 (18 mg)Solvent-free/90 °C21051This work2NiO (18 mg)Solvent-free/90 °C18057This work3ZnO (18 mg)Solvent-free/90 °C18065This work3SiO2@NiO@MS (18 mg)Solvent-free/90 °C21080This work4Phenylalanine (18 mg)Solvent-free/90 °C25052This work5P-TsOH (18 mg)Solvent-free/90 °C21061This work6SiO2@NiO@MS-Phenylalanine (18 mg)Toluene/70 °C12074This work7SiO2@NiO@MS-Phenylalanine (18 mg)Water/80 °C4583This work8SiO2@NiO@MS-Phenylalanine (5 mg)Solvent-free/90 °C15071This work9SiO2@NiO@MS-Phenylalanine (8 mg)Solvent-free/90 °C9075This work10SiO2@NiO@MS-Phenylalanine (13 mg)Solvent-free/90 °C3084This work11SiO2@NiO@MS-Phenylalanine (18 mg)Solvent-free/40 °C1397This work12SiO2@NiO@MS-Phenylalanine (18 mg)MeCN/60 °C12077This work13Guanidinium-based sulfonic (10 mol %)H2O/Reflux150876614GO/SiO2/Co (II) (20 mg)Solvent-free/90 °C12975715Fe3O4@SiO2@(CH2)3-1H-1,2,4- triazole-3-thioSolvent-free/100 °C20946716SiO2@NiO@MS-Phenylalanine (18 mg)Solvent-free/40 °C1794This work17Iron (III) chloride (16.2 mg)CH3CN/Reflux90854918GO/SiO2/Co (II) (20 mg)Solvent-free/90 °C19935719PEG-SO3H (10 mol %)Solvent-free/80 °C3608953aIsolated yield. The optimized reaction conditions for the synthesis of 6,6-dimethyl-9-(4-chlorophenyl)-2-phenyl-5,6,7,9-tetrahydro-1H,8H-[1,2,4]triazolo[1,2-a]indazole-1,3,8(2H)-trione (entries 1–15) and 6’,6'-dimethyl-2'-phenyl-6',7'-dihydro-1'H-spiro[indoline-3,9'-[1,2,4]triazolo[1,2-a]indazole]-1',2,3',8'(2'H,5'H)-tetraone (entries 16–19) compounds. aIsolated yield. Table 2Synthesis of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraonesa.EntryNameStarting Aldehydes/IsatinsTime (min)Yieldb (%)TOFTONMP °CMP °CRefs.14a2,4 dichlorobenzaldhyde1091162.5 h-126194–197196–1976824b4-NO2 benzaldehyde1396121.3 h-127.4177–178176–1786834cbenzaldehyde209788.18 h-127.7160–162162–1636844d3-NO2 benzaldehyde1097173.2 h-127.7131–132130–1326654e4-Cl benzaldehyde1397129.3 h-127.7172–174169–1716864f.4-Me benzaldehyde218974.1 h-125.4164–166163–1645374gisatin179495.9 h-126.8295–298298–3005384h5-NO2 isatin1094167.85 h-126.8230–232-94i5-Br isatin1395126.6 h-127.1293–294292–29353104j5-CH3 isatin1590103.4 h-125.7305–306308–31053aReaction conditions: dimedone (1 mmol), 4-phenyl urazole (1 mmol), aromatic aldehyde or isatin derivatives (1 mmol), SiO2@NiO@MS-Phenyl alanine (18 mg), solvent-free (40 °C).bIsolated yield. Synthesis of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraonesa. aReaction conditions: dimedone (1 mmol), 4-phenyl urazole (1 mmol), aromatic aldehyde or isatin derivatives (1 mmol), SiO2@NiO@MS-Phenyl alanine (18 mg), solvent-free (40 °C). bIsolated yield. Proposed mechanism In suggesting mechanism, dimedone first is converted to its enol form in the presence of the catalyst (SiO2@NiO@MS-phenylalnine). Then it attacks a carbonyl group of benzaldehyde activated by the catalyst to create an intermediate (I). Then, the nitrogen of 4-phenyl urazole (3) reacts with the unsaturated carbon in conjugation with the carbonyl through Michel addition and gives an intermediate (II) which by removing water, the final product is formed (Scheme 2). Scheme 3 suggests the mechanism of spirotriazolo[1,2-a] indazole-tetrons, and as in Scheme 2, dimedone (1) is first converted to its enol form in the presence of a catalyst. It then attacks an isatin carbonyl group (4), which is activated by the catalyst to form intermediate (III). Then the nitrogen of 4-phenylurazole (3) reacts with the unsaturated carbon via Michael addition in the conjugated form with the carbonyl and creates an intermediate (IV) which forms the final product by removing water.Scheme 2The proposed mechanism for the synthesis of triazolo[1,2-a] indazole-trione compound.Scheme 3The proposed mechanism for the synthesis of spiro triazolo[1,2-a] indazole-tetraones compound. The proposed mechanism for the synthesis of triazolo[1,2-a] indazole-trione compound. The proposed mechanism for the synthesis of spiro triazolo[1,2-a] indazole-tetraones compound. Catalyst reusability The catalyst reusability was assessed for the model reaction. To recover the catalyst, the catalyst was separated by centrifugation washed with water, and then dried at 50 °C for 14h. The catalyst performance after recovering showed the less decrease from 94% in the first run to 88% after six times (Fig. 10). The SEM and TEM analysis for the reused catalyst show no significant changes in the morphology of the catalyst (Fig. 11). A hot filtration test was performed to probe the leaching of the catalyst. In this process, a mixture containing dimedone (1 mmol), 4-phenyl urazole (1 mmol), aromatic aldehyde derivatives (1 mmol), Ethanol, and SiO2@NiO@MS-Phenyl alanine (18 mg) was stirred at 78 °C. After half the reaction time, the catalyst was separated from the mixture. The reaction mixture without the catalyst was then allowed for 30 min. No conversion increase was observed after separating the nanocatalyst from the reaction mixture. Furthermore, measurement of the organic ligand in solution by H-NMR analysis showed that practically no organic ligand was present during the leaching reaction.Fig. 10Catalyst recycling for SiO2@NiO@MS-Phenylalanine.Fig. 11SEM (a) and TEM (b) images for the reused catalyst. Catalyst recycling for SiO2@NiO@MS-Phenylalanine. SEM (a) and TEM (b) images for the reused catalyst. Conclusion In summary, we describe the synthesis of a new core–shell mesoporous microsphere catalyst, featuring an SBA-15-type architecture in the outer layer (SiO2@NiO@MS-phenylalanine). The prepared SiO2@NiO nanocomposite was coated with a mesoporous silicon layer, featuring large tunable pore sizes, using cetyltrimethylammonium bromide (CTAB) as a co-surfactant and P123 as a triblock copolymer. The catalyst’s potential was evaluated by employing it in the synthesis of triazolo[1,2-a] indazole-trione and spiro triazolo[1,2-a] indazole-tetraones compounds. The results demonstrated the catalyst’s high efficiency, achieving a product yield of up to 97% in a short time. Electronic supplementary material Below is the link to the electronic supplementary material. Supplementary Material 1 Supplementary Material 1