ToMCCA: a Toy Monte Carlo Coalescence Afterburner Authors: Maximilian Mahlein, Chiara Pinto, Laura Fabbietti Published: 2024 ABSTRACT Antinuclei in our Galaxy may stem either from annihilation or decay of dark matter, or from collisions of cosmic rays with the interstellar medium, which constitute the background of indirect dark matter searches. Understanding the formation mechanism of (anti)nuclei is crucial for setting limits on their production in space. Coalescence models, which describe the formation of light nuclei from final-state interaction of nucleons, have been widely employed in high-energy collisions. In this work, we introduce ToMCCA (Toy Monte Carlo Coalescence Afterburner), which allows for detailed studies of the nuclear formation processes without the overload of general-purpose event generators. ToMCCA contains parameterizations of the multiplicity dependence of the transverse momentum distributions of protons and of the baryon-emitting source size, extracted from ALICE measurements in pp collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s} = 5 - 13$$\end{document}s=5-13 TeV, as well as of the event multiplicity distributions, taken from the EPOS event generator. ToMCCA provides predictions of the deuteron transverse momentum distributions, with agreement of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim 5\%$$\end{document}∼5% with the experimental data. The results of ToMCCA show that the coalescence mechanism in pp collisions depends only on the event multiplicity, not on the collision system or its energy. This allows the model to be utilized for predictions at lower center-of-mass collision energies, which are the most relevant for the production of antinuclei from processes related to dark matter. This model can also be extended to heavier nuclei as long as the target nucleus wavefunction and its Wigner function are known. Introduction The study and potential detection of antinuclei in cosmic rays has emerged as an exciting field of research, offering a unique opportunity to explore possible signals from physics beyond the Standard Model. Antinuclei, consisting of antiprotons and antineutrons, are exceedingly rare in cosmic rays relative to their matter counterparts, and their presence in our Galaxy could be due to annihilation or decay of dark matter (DM) candidates [1, 2]. Indeed, the antinuclear flux expected from Standard Model processes due to collisions of high-energy cosmic rays (CRs) and the interstellar medium (ISM) is expected to be two to four orders of magnitude lower than the dark matter flux at low kinetic energies (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_{\textrm{kin}}<1$$\end{document}Ekin<1 GeV/A) [3, 4]. Both CRs and the ISM are mostly made of protons (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim $$\end{document}∼ 90\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}%) and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^4$$\end{document}4He nuclei (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim $$\end{document}∼ 9\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}%), and only include a small percentage of heavier nuclei. Hence, the main channels contributing to the Standard Model background are collisions between protons and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^4$$\end{document}4He nuclei (p–p, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\hbox {p--}^4\hbox {He,}^4$$\end{document}p--4He,4He–p, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^4\hbox {He--}^4$$\end{document}4He--4He), with center-of-mass energies of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathcal {O}}(10)$$\end{document}O(10) GeV [5]. Understanding the formation mechanism of antinuclei is crucial for estimating the production cross-section from the Standard Model and dark matter contributions and for interpreting any future measurements of antinuclear flux from cosmic rays. Different experimental efforts are ongoing to measure the flux of antinuclei in cosmic rays, such as the Alpha Magnetic Spectrometer (AMS)-02 [6], General AntiParticle Spectrometer (GAPS) [7], and Balloon-borne Experiment with Superconducting Spectrometer (BESS)-Polar [8] experiments. However, antinuclei heavier than antiprotons have not yet been measured. Coalescence models have been widely used to study the formation of light nuclei starting from the production of individual nucleons in high-energy hadronic collisions [9–15]. In these models, light nuclei are formed through the coalescence of nucleons that satisfy specific conditions, such as small relative momentum, spatial proximity, and spin–isospin alignment. In the simplest implementations of coalescence, only the momentum correlations are considered, and the bound states are formed if the difference in momentum among the nucleons is below a given threshold, namely the coalescence momentum \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_0$$\end{document}p0. In the state-of-the-art implementations of the coalescence approach, the quantum-mechanical properties of the constituent baryons and those of the final bound states are taken into account, and the coalescence probability is calculated from the overlap between the wavefunctions of individual (point-like) baryons and the Wigner density of the final-state cluster [13, 15–19]. Monte Carlo (MC) simulations have proved to be powerful tools for investigating nuclear dynamics and particle production in high-energy hadronic collisions, as they offer a stochastic treatment of the complex dynamics in high-energy particle collisions while maintaining the full information on the spacetime position and momenta of individual particles. By combining the principles of MC event generators with coalescence models, recent descriptions of the momentum distributions of nuclei have drastically improved [16, 19]. In light of these advancements, we propose a new approach to MC-based coalescence, called ToMCCA (Toy Monte Carlo Coalescence Afterburner)1 ToMCCA is a toy Monte Carlo that allows for a detailed study of the nuclear formation process without the overload of general-purpose event generators. In ToMCCA, the production of bound states is implemented through a coalescence afterburner based on the Wigner function formalism. The event generation is customizable, and the kinematics of the produced nucleons are tuned using parameterizations of (i) the multiplicity dependence of their transverse momentum (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{\textrm{T}}$$\end{document}pT) distributions, (ii) their angular momentum correlations, (iii) the baryon-emitting source size, and (iv) the multiplicity distributions. Using such parameterizations and computing the probability of coalescence employing the Wigner function of the nucleus, ToMCCA provides predictions for the transverse momentum distributions of deuterons, for arbitrary multiplicity intervals covered by pp collisions. The parameterizations included in ToMCCA, based on measurements carried out with ALICE, make use of results from proton–proton (pp) collisions at a center-of-mass energy of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 5 TeV [20] and of those selected with the high-multiplicity (HM) trigger in pp collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 13 TeV [21]. The performance of ToMCCA is tested against the deuteron \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{\textrm{T}}$$\end{document}pT distributions of pp collisions at energies not included in the parameterizations, namely \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 13 TeV [22] (with a minimum-bias trigger) and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 7 TeV [23]. The ToMCCA model can be easily extended to heavier nuclei, as long as the nucleus wavefunction is known and its Wigner function is computed, and to lower center-of-mass collision energies, of the order of 10 GeV, which are the most relevant for the production of antinuclei from processes related to dark matter [5]. Working principle of ToMCCA Coalescence model The coalescence afterburner model built in ToMCCA is based on the Wigner function formulation of coalescence. For more details, see Refs. [16, 19] and references therein. For convenience, we summarize here the basics of the coalescence model used in ToMCCA. The general idea is that the momentum distribution of deuterons in the final state (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}^3N/\textrm{d}P^3$$\end{document}d3N/dP3) can be expressed by projecting the phase space of the unbound proton–neutron (p–n) system (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$W_{np}$$\end{document}Wnp) onto the Wigner function of the deuteron \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$D(\vec {q},\vec {r})$$\end{document}D(q→,r→)1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \frac{\textrm{d}^3N}{\textrm{d}P^3}= & S\int \textrm{d}^3q\int \textrm{d}^3r_d \int \textrm{d}^3r D(\vec {q},\vec {r}) \nonumber \\ & \times W_{np}(\vec {P}_d/2+\vec {q},\vec {P}_d/2-\vec {q}, \vec {r}_d, \vec {r}), \end{aligned}$$\end{document}d3NdP3=S∫d3q∫d3rd∫d3rD(q→,r→)×Wnp(P→d/2+q→,P→d/2-q→,r→d,r→),where S is the spin–isospin statistics factor, which equals 3/8 for deuterons, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\vec {P}_d$$\end{document}P→d is the total momentum, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\vec {q}$$\end{document}q→ is the relative momentum, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\vec {r}_d$$\end{document}r→d is the center-of-mass position, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\vec {r}$$\end{document}r→ the distance of the p–n pair. The deuteron Wigner function depends only on the wavefunction of the deuteron, for which there are multiple options, e.g., Gaussian, Hulthen [24], double Gaussian, or Argonne \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$v_{18}$$\end{document}v18 [25]. In this work, we use the Argonne \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$v_{18}$$\end{document}v18 wavefunction, which was shown to have the best agreement with experimental data in Ref. [19]. For the deuteron Wigner function, we use the parameterization reported in the appendix of Ref. [19] for the Argonne \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$v_{18}$$\end{document}v18 wavefunction2 We make the assumption that one can factorize the two-nucleon phase space into its space and momentum terms. The p–n phase space assumes the form2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} & W_{np}(\vec {P}_d/2+\vec {q},\vec {P}_d/2-\vec {q}, \vec {r}_d, \vec {r})=H_{np}(\vec {r},\vec {r}_d;r_0) \nonumber \\ & \quad \times G_{np}(\vec {P}_d/2+\vec {q},\vec {P}_d/2-\vec {q}). \end{aligned}$$\end{document}Wnp(P→d/2+q→,P→d/2-q→,r→d,r→)=Hnp(r→,r→d;r0)×Gnp(P→d/2+q→,P→d/2-q→).Folding the deuteron Wigner function with the nucleon phase-space distribution, it is possible to obtain the coalescence probability \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathcal {P}}(r_0,\vec {q})$$\end{document}P(r0,q→) as a function of the source size \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0$$\end{document}r0 and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\vec {q}$$\end{document}q→3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} {\mathcal {P}}(\vec {q},r_0)=\int \textrm{d}^3r \int \textrm{d}^3r_d D(\vec {q},\vec {r}) H_{np}(\vec {r},\vec {r}_d;r_0). \end{aligned}$$\end{document}P(q→,r0)=∫d3r∫d3rdD(q→,r→)Hnp(r→,r→d;r0).The source size is described in Sect. 3. This probability can then be applied on any p–n pair, on a pair-by-pair basis, to predict deuteron transverse momentum distributions. The ToMCCA toy Monte Carlo The use of a toy MC instead of traditional MC event generators, such as Pythia [26, 27] or EPOS [28], allows for much faster computation, as only processes strictly necessary for coalescence are computed. Furthermore, such a lightweight generator can be easily modified and customized by the end-user, allowing for many more differential studies. In this work, we developed a toy Monte Carlo generator that reproduces the deuteron momentum distributions employing parameterizations of the following parameters:Charged-particle multiplicity of eventsNucleon momentum distributionsAngular correlations among nucleonsHadron-emitting source sizeNuclear wavefunctionsThe parameterizations included in ToMCCA are based on experimental measurements from the ALICE Collaboration, except for the parameterization of the charged-particle multiplicity distributions, which is based on EPOS 3, as described in detail in Sect. 2.2.4. Charged-particle multiplicity of events Charged-particle multiplicity of events Nucleon momentum distributions Nucleon momentum distributions Angular correlations among nucleons Angular correlations among nucleons Hadron-emitting source size Hadron-emitting source size Nuclear wavefunctions Nuclear wavefunctions Event multiplicity The starting point of ToMCCA is the determination of the charged-particle multiplicity of the event that is generated. This number is usually given by the number of charged particles per unit of pseudorapidity \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\eta $$\end{document}η, e.g., measured in a range of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|\eta |<0.5$$\end{document}|η|<0.5 (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(\textrm{d}N_{ch}/\textrm{d}\eta )_{|\eta |<0.5}$$\end{document}(dNch/dη)|η|<0.5). Particle spectra are often measured in a different kinematic range, such as \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|y|<0.5$$\end{document}|y|<0.5, where y is the rapidity relative to the beam axis. To transform from \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|\eta |<0.5$$\end{document}|η|<0.5 to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$|y|<0.5$$\end{document}|y|<0.5, a scaling constant \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha $$\end{document}α has to be determined such that \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha \cdot (\textrm{d}N_{ch}/\textrm{d}\eta )_{|\eta |<0.5} = (\textrm{d}N_{ch}/\textrm{d}y)_{|y|<0.5}$$\end{document}α·(dNch/dη)|η|<0.5=(dNch/dy)|y|<0.5 [29]. This can be computed using event generators. For the case of ToMCCA, a value of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha =1.192$$\end{document}α=1.192 is determined using EPOS 3 [28]. There are multiple ways to reproduce each given \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N_\textrm{ch}/\textrm{d}\eta $$\end{document}dNch/dη value. Two simple approaches are included in ToMCCA: (i) fixed multiplicity, i.e., generating exactly \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha \textrm{d}N_\textrm{ch}/\textrm{d}\eta $$\end{document}αdNch/dη particles per event, and (ii) Poissonian multiplicity, i.e., generating a Poissonian distribution around the chosen multiplicity value. However, since coalescence is a nonlinear process, i.e., it depends on the number of pairs rather than single particles, the overall shape of the distribution plays a significant role. Thus, a more realistic approach is needed. An improvement can be reached by using an event generator, such as EPOS 3. Using an unbiased triggering method, such as the one employed by the ALICE experiment [21], the chosen mean charged-particle multiplicities can be triggered outside of the nucleus measurement region (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$-\,3.7<\eta <-\,1.7$$\end{document}-3.7<η<-1.7 and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$2.8<\eta <5.1)$$\end{document}2.8<η<5.1). The shapes of the resulting midrapidity distributions can be well described using the Erlang distribution [30], given by4\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} f(x;k,\lambda )=\frac{\lambda ^k x^{k-1} \textrm{e}^{-\lambda x}}{(k-1)!}. \end{aligned}$$\end{document}f(x;k,λ)=λkxk-1e-λx(k-1)!.While technically the Erlang distribution is only defined for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\in {\mathbb {N}}^+$$\end{document}k∈N+, it can be extended to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\in {\mathbb {R}}_{\ge 0}$$\end{document}k∈R≥0 without introducing any poles, as long as \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$x>0$$\end{document}x>0. This further requires one to generalize the factorial \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$(k-1)!$$\end{document}(k-1)! to the gamma function \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Gamma (k)$$\end{document}Γ(k), valid for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$k\in {\mathbb {R}}_{\ge 0}$$\end{document}k∈R≥0. With these modifications, the multiplicity dependence of the parameters of the Erlang function k and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\lambda $$\end{document}λ can be modeled with a power law function (given by Eq. 13). The parameters of the power law function can be found in Table 1.Table 1Parameterization of the Erlang distribution using power law functionsParameterk\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\lambda $$\end{document}λA00B0.775440.72653C0.74669− 0.23343 Table 1Parameterization of the Erlang distribution using power law functionsParameterk\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\lambda $$\end{document}λA00B0.775440.72653C0.74669− 0.23343 Parameterization of the Erlang distribution using power law functions The ToMCCA event A schematic view of the event loop in ToMCCA is shown in Fig. 1. First, the number of nucleons (protons and neutrons separately) in a given event is calculated starting from the particle multiplicity of the event (Sect. 2.2.3). In panel (1) of Fig. 1, an exemplary situation in which four protons (red) and four neutrons (blue) are produced is depicted. Then, the three-dimensional momentum of the first proton and all neutrons is determined (Sect. 2.2.4), as well as their relative distances (Sect. 3), as sketched in panel (2) of Fig. 1. Using these momenta (q) and distances (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0$$\end{document}r0), the coalescence probability \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\mathcal {P( {q}, r_0)}$$\end{document}P(q,r0) is calculated for each pair using Eq. 3. A random number \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r\in [0,1]$$\end{document}r∈[0,1] is drawn, and if \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r<\mathcal {P( {q}, r_0)}$$\end{document}r30$$\end{document}dNch/dη||η|<0.5>30–\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$300\%$$\end{document}300% for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N_{ch}/\textrm{d}\eta |_{|\eta |<0.5}\sim 3$$\end{document}dNch/dη||η|<0.5∼3. This shows that the exact degree of suppression is a valuable input to this model. The parameter a can be tuned to a measurement of the Pearson coefficient of proton and deuteron \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\mathrm{{pd}}}$$\end{document}ρpd as the correlation between proton and neutron is transferred into the correlation between proton and deuteron. Such measurements have been performed in the past on Pb–Pb data [32], but not yet in pp collisions. The Pearson correlation coefficient can be calculated as7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} \rho _{\mathrm{{pn}}}=\langle (n_p-\langle n_p\rangle )(n_n-\langle n_n\rangle )\rangle /\sqrt{\kappa _{2p}\kappa _{2n}}, \end{aligned}$$\end{document}ρpn=⟨(np-⟨np⟩)(nn-⟨nn⟩)⟩/κ2pκ2n,where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\kappa _{2a}$$\end{document}κ2a is the second-order cumulant of the particle multiplicity distribution \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\kappa _{2a}=\langle (n-\langle n\rangle )^2\rangle $$\end{document}κ2a=⟨(n-⟨n⟩)2⟩. The calculated proton–neutron Pearson coefficients \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\mathrm{{pn}}}$$\end{document}ρpn for each method can be found in Table 3. In the following, all results are obtained using the tuned emission method.Table 3The Pearson correlation coefficient between protons and neutrons for different hadronization methodsUnc. Em.String Fragm.Quark Rec.Tuned Em.\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\mathrm{{pn}}}$$\end{document}ρpn0− 0.052− 0.058− 0.024 Table 3The Pearson correlation coefficient between protons and neutrons for different hadronization methodsUnc. Em.String Fragm.Quark Rec.Tuned Em.\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\mathrm{{pn}}}$$\end{document}ρpn0− 0.052− 0.058− 0.024 The Pearson correlation coefficient between protons and neutrons for different hadronization methods Kinematics Once the number of protons and neutrons is calculated, their kinematics have to be determined. In the following, the procedure used to assign the three-dimensional momentum to nucleons and the angular correlations to the nucleon pairs is described. 1. Nucleon momentum distributions The \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_\textrm{T}$$\end{document}pT distributions of nucleons are described using a Levy–Tsallis function (Eq. 16). However, the shape of the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_\textrm{T}$$\end{document}pT distribution evolves with the multiplicity of the event [33]. Thus, ToMCCA requires a parameterization of the shape of the transverse momentum distributions of nucleons as a function of multiplicity. For this, the proton spectra measured by ALICE in pp collisions at a center-of-mass energy of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 5 TeV [20] and those selected with the high-multiplicity (HM) trigger in pp collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 13 TeV [21] have been fitted using Eq. 16. The evolution of the Levy–Tsallis parameters (dN/dy, n, T) has been modeled as a function of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N/\textrm{d}\eta $$\end{document}dN/dη according to a power law function (Eq. 13). The values of the parameters can be found in Table 4. Due to a high correlation between the parameters T and n, the latter was constrained to Eq. 13, only letting the parameter A vary slightly (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$7.3\pm 0.1$$\end{document}7.3±0.1) and fixing C=−1. This is to ensure that the T parameter evolves smoothly as a function of multiplicity. Furthermore, depending on the hadronization model used for the particle production (Sect. 2.2.3), the parameter T needs to be modified, since the models can show edge effects that alter the yield, especially at low multiplicities. For this, T is modified as8\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} T_\textrm{mod}(\textrm{d}N/\textrm{d}\eta )=T(\textrm{d}N/\textrm{d}\eta ) \cdot (A+B(\textrm{d}N/\textrm{d}\eta )^{C}). \end{aligned}$$\end{document}Tmod(dN/dη)=T(dN/dη)·(A+B(dN/dη)C).The resulting parameterization can be found in Table 4. Since in the modification term \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$A\approx 1$$\end{document}A≈1 and C < 0, this correction only modifies low-multiplicity events, while the modification term tends to 1 for high-multiplicity events.Table 4Values of the parameters for the yield parameterization. The parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{QuarkReco}$$\end{document}TmodQuarkReco and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{StringFrag}$$\end{document}TmodStringFrag refer to the modifications of the temperature parameter T of Eq. 8, for the quark recombination and string fragmentation hadronization methods, respectivelydN/dynT\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{QuarkReco}$$\end{document}TmodQuarkReco\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{StringFrag}$$\end{document}TmodStringFragA–7.3230690–0.99534330.9947258B0.061522.08554180.10805− 0.7380489− 4.341114C0.95621− 10.36889− 2.0069334− 4.555843 Table 4Values of the parameters for the yield parameterization. The parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{QuarkReco}$$\end{document}TmodQuarkReco and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{StringFrag}$$\end{document}TmodStringFrag refer to the modifications of the temperature parameter T of Eq. 8, for the quark recombination and string fragmentation hadronization methods, respectivelydN/dynT\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{QuarkReco}$$\end{document}TmodQuarkReco\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{StringFrag}$$\end{document}TmodStringFragA–7.3230690–0.99534330.9947258B0.061522.08554180.10805− 0.7380489− 4.341114C0.95621− 10.36889− 2.0069334− 4.555843 Values of the parameters for the yield parameterization. The parameters \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{QuarkReco}$$\end{document}TmodQuarkReco and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$T_\textrm{mod}^\textrm{StringFrag}$$\end{document}TmodStringFrag refer to the modifications of the temperature parameter T of Eq. 8, for the quark recombination and string fragmentation hadronization methods, respectively In addition to the transverse momentum, the rapidity y is drawn from a flat distribution \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$y\in [-\,0.5,0.5]$$\end{document}y∈[-0.5,0.5]. This is well motivated for measurements at midrapidity [34]. 2. Angular correlations To eventually fix the full three-dimensional momentum information, the relative angle between the proton and the neutron needs to be determined. Experimentally, this is accessed using the angular correlation function [35]9\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} C(\varDelta \varphi )= \frac{S(\varDelta \varphi )}{B(\varDelta \varphi )}, \end{aligned}$$\end{document}C(Δφ)=S(Δφ)B(Δφ),where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$S(\varDelta \varphi )$$\end{document}S(Δφ) is the same event \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varDelta \varphi $$\end{document}Δφ distribution, i.e., the angular distribution of the azimuthal angle between two particles in the same event. Conversely, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B(\varDelta \varphi )$$\end{document}B(Δφ) is the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varDelta \varphi $$\end{document}Δφ distribution of pairs from mixed events, i.e., relative angles between particles from different events. The latter removes trivial correlations from the same event distribution and reduces them to the genuine correlation. However, for a model like ToMCCA, the actual angle between particles in the same event is needed. Hence, only the same event angular distribution \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$S(\varDelta \varphi )$$\end{document}S(Δφ) is required. In order to isolate this distribution, the measured \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C(\varDelta \varphi )$$\end{document}C(Δφ) distribution is multiplied by a \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B(\varDelta \varphi )$$\end{document}B(Δφ) obtained from event generators. This method is applicable since \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B(\varDelta \varphi )$$\end{document}B(Δφ) contains only trivial correlations due to collision geometry and energy conservation that are well reproduced in event generators. For ToMCCA, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B(\varDelta \varphi )$$\end{document}B(Δφ) is obtained again from EPOS 3 and assumed to be independent of the event multiplicity. The \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C(\varDelta \varphi )$$\end{document}C(Δφ) for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$pp+{\overline{p}}{\overline{p}}$$\end{document}pp+p¯p¯ pairs is measured by the ALICE Collaboration [35], as a function of multiplicity. However, since measurements in all multiplicity classes are compatible with each other within their uncertainties, the data measured in the 20–40% multiplicity class is used for all multiplicities. The final same event distribution \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$S(\varDelta \varphi )=C(\varDelta \varphi )\times B(\varDelta \varphi )$$\end{document}S(Δφ)=C(Δφ)×B(Δφ) is expressed as10\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} S(\varDelta \varphi )= & \underbrace{(N_0 \sin (\varDelta \varphi - \pi /2) + 1)}_{C(\varDelta \varphi )} \nonumber \\ & \times \underbrace{(N_1|\varDelta \varphi |+B)(N_2 \textrm{e}^{-\varDelta \varphi ^2/A^2})}_{B(\varDelta \varphi )}. \end{aligned}$$\end{document}S(Δφ)=(N0sin(Δφ-π/2)+1)⏟C(Δφ)×(N1|Δφ|+B)(N2e-Δφ2/A2)⏟B(Δφ).The parameters can be found in Table 5.Table 5Values for the parameterization of the angular correlationParameter\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B(\varDelta \varphi )$$\end{document}B(Δφ)A0.85747601B5.7197689\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_1$$\end{document}N1− 0.89304215\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_2$$\end{document}N20.26041062\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_0$$\end{document}N00.17701025 Table 5Values for the parameterization of the angular correlationParameter\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B(\varDelta \varphi )$$\end{document}B(Δφ)A0.85747601B5.7197689\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_1$$\end{document}N1− 0.89304215\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_2$$\end{document}N20.26041062\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_0$$\end{document}N00.17701025 Values for the parameterization of the angular correlation Source size The last key ingredient for coalescence is the source size \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0$$\end{document}r0, which is a measure of the distance between the particles of the pair. In ToMCCA, the source is assumed to be distributed according to a Gaussian function, and thus the distances r between particles follow the distribution [36]11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} S(r;r_0)=\frac{4\pi r^2}{(4\pi r_0^2)^{3/2}}\textrm{e}^{-\frac{r^2}{4r_0^2}}, \end{aligned}$$\end{document}S(r;r0)=4πr2(4πr02)3/2e-r24r02,from which distances are drawn at random. The source size in small systems has been measured as a function of the average transverse mass3 in pp collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}~=~13$$\end{document}s=13 TeV with a high-multiplicity trigger [36]. These collision events have a mean charged-particle multiplicity of about \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N_{ch}/\textrm{d}\eta \sim 30$$\end{document}dNch/dη∼30. On the other hand, minimum-bias pp collisions have a mean multiplicity of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N_{ch}/\textrm{d}\eta \sim 7$$\end{document}dNch/dη∼7, and it is expected that the source size depends on multiplicity [37]. Thus, a description of the source size for arbitrary multiplicity is needed to accurately describe the deuteron production. For this purpose, the coalescence model is reversed, leaving the source size as a free parameter and including the deuteron momentum distributions in the fitting procedure of ToMCCA. The deuteron spectra are taken from the ALICE measurements in pp collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 5 TeV [20] and from the HM sample of pp collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 13 TeV [21], spanning a range of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N_\textrm{ch}/\textrm{d}\eta $$\end{document}dNch/dη from 2.4 to 35.8 [21, 22]. The fitting procedure consists of several steps, as described in the following. First, for a given multiplicity, the deuteron \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_\textrm{T}$$\end{document}pT distributions are generated for source sizes from \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0$$\end{document}r0= 0 to 1.8 fm. Then, for each value of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_\textrm{T}$$\end{document}pT, the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\chi ^2=\frac{Y_\textrm{ToMCCA}-Y_\textrm{ALICE}}{\varDelta Y_\textrm{ALICE}}$$\end{document}χ2=YToMCCA-YALICEΔYALICE (with Y being the yield for a given \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_\textrm{T}$$\end{document}pT, either in ToMCCA or in data, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\varDelta Y$$\end{document}ΔY the uncertainty of the data points) is calculated for all tested source sizes. The resulting distribution of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\chi ^2$$\end{document}χ2 as a function of the source size, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\chi ^2(r_0)$$\end{document}χ2(r0), can be fitted with a polynomial function of second order, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$y=a(x-c)^2$$\end{document}y=a(x-c)2. The parameter c gives the best fitting source size, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$1/\sqrt{a}$$\end{document}1/a corresponds to the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$1\sigma $$\end{document}1σ deviation. This procedure is repeated for every value of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_\textrm{T}$$\end{document}pT covered by the measurement. The resulting source size scaling as a function of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\langle m_\textrm{T} \rangle $$\end{document}⟨mT⟩ is fitted using a power law (Eq. 13, with parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$A=0$$\end{document}A=0). Finally, the procedure is repeated for all multiplicities in the datasets of pp collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 5 TeV and HM at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 13 TeV. The resulting power law parameters B and C are fitted as a function of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N/\textrm{d}\eta $$\end{document}dN/dη with Eqs. 14 and 15, respectively. The functional form of Eq. 14 has been chosen to reproduce the observation of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0\propto N_{ch}^{1/3}$$\end{document}r0∝Nch1/3 at large multiplicities [38] and its saturation to a minimal source size \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0\sim R_p=0.87$$\end{document}r0∼Rp=0.87 fm [39] similar to the proton radius (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$R_p$$\end{document}Rp). The parameters are reported in Table 6. With this parameterization, it is possible to obtain the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\langle m_T\rangle $$\end{document}⟨mT⟩ scaling of the source size for arbitrary multiplicity values, shown as an example in Fig. 3. The predictions of ToMCCA are compared with the source size measured by ALICE [36] in the HM data sample of pp collisions, corresponding to an average multiplicity of about 30 charged particles, showing very good agreement with the results of the model. To date, there are no experimental measurements of the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\langle m_T\rangle $$\end{document}⟨mT⟩-scaling of the source radii as a function of the average charged-particle multiplicity in minimum-bias pp collisions at the Large Hadron Collider (LHC). Future measurements of this quantity with the LHC Run 3 data will be useful for a quantitative comparison with the predictions of ToMCCA. The uncertainties associated with these predictions stem from the uncertainty of the measurement of the proton and deuteron production yields. The model uncertainties are estimated by repeating the fitting procedure using a parameterization of the lower and upper bounds of the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N/\textrm{d}y$$\end{document}dN/dy parameter in Eq. 16 and taking the uncertainty from the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\chi ^2$$\end{document}χ2 minimization described above. The obtained global uncertainties are 3.5% from the protons and 4.4% from the deuterons, which, added in quadrature, give \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\delta B(\textrm{d}N/\textrm{d}\eta )=5.7\%$$\end{document}δB(dN/dη)=5.7%. The C parameter is unchanged within these variations. Propagating this uncertainty to the predictions of the deuteron spectra, by varying \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B(\textrm{d}N/\textrm{d}\eta )$$\end{document}B(dN/dη) by 5.7%, changes the deuteron yield by \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pm 4.6\%$$\end{document}±4.6%.Fig. 3Scaling of the baryon-emitting source size as a function of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\langle m_T\rangle $$\end{document}⟨mT⟩, for arbitrary multiplicity values. The predictions of ToMCCA are compared with the measured source size corresponding to an event multiplicity of about 30 [36]Table 6Parameterization as a function of multiplicity of the power law parameters describing the source size \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0$$\end{document}r0Parameter\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B (\textrm{d}N/\textrm{d}\eta $$\end{document}B(dN/dη)C(\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N/\textrm{d}\eta $$\end{document}dN/dη)A0.59781− 0.85246B0.589830.83824C1.264814.25301D− 0.482620.182242N–0.99022M10.8889– Scaling of the baryon-emitting source size as a function of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\langle m_T\rangle $$\end{document}⟨mT⟩, for arbitrary multiplicity values. The predictions of ToMCCA are compared with the measured source size corresponding to an event multiplicity of about 30 [36] Table 6Parameterization as a function of multiplicity of the power law parameters describing the source size \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0$$\end{document}r0Parameter\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B (\textrm{d}N/\textrm{d}\eta $$\end{document}B(dN/dη)C(\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N/\textrm{d}\eta $$\end{document}dN/dη)A0.59781− 0.85246B0.589830.83824C1.264814.25301D− 0.482620.182242N–0.99022M10.8889– Parameterization as a function of multiplicity of the power law parameters describing the source size \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$r_0$$\end{document}r0 Results Transverse momentum distributions and coalescence parameter Using all the parameterizations as a function of multiplicity described in the previous sections and the coalescence afterburner based on the Wigner function, it is possible to obtain the proton and deuteron momentum distributions for any value of multiplicity. In Fig. 4, the resulting proton and deuteron momentum distributions obtained with ToMCCA are shown in the top panels and compared with the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{\textrm{T}}$$\end{document}pT distributions measured by ALICE [20, 22, 23, 33, 40]. The different colors refer to different multiplicity classes, as reported in the legend, taken from different pp collision energies. All results show excellent agreement with the data points, being able to reproduce data within \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$1\sigma $$\end{document}1σ for all the multiplicity classes covered by pp collisions (up to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim 36$$\end{document}∼36). These results demonstrate that the coalescence model implemented in ToMCCA works for any collision energy and depends only on the chosen multiplicity class. This can be clearly seen in Fig. 5, where ToMCCA predictions are compared with results from three different energies of pp collisions, corresponding to similar multiplicity values (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N_\textrm{ch}/\textrm{d}\eta \sim 8$$\end{document}dNch/dη∼8). Consequently, the model presented in this article can be used for any collision energy of pp collisions, finding applicability for the astrophysics searches of indirect dark matter. Indeed, to correctly interpret future measurements of the flux of antinuclei from cosmic rays, modeling the flux of antinuclei produced in collisions between the ISM and the primary CRs is crucial, as they constitute the background for the DM searches. It was shown in [5] that antideuterons in cosmic rays most likely originate from collisions of center-of-mass energy of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}=$$\end{document}s= 20–30 GeV. The multiplicities corresponding to these collision energies were measured by the Intersecting Storage Rings ISR) experiment [41] and correspond to values between \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N/\textrm{d}\eta =(1.50 \pm 0.01)$$\end{document}dN/dη=(1.50±0.01) and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\textrm{d}N/\textrm{d}\eta =(1.66\pm 0.02) $$\end{document}dN/dη=(1.66±0.02), for energies between \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim 23.6\, \textrm{GeV}$$\end{document}∼23.6GeV and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim 30.8\, \textrm{GeV}$$\end{document}∼30.8GeV. Hence, ToMCCA can be used to model the production of antideuterons at such multiplicities and to predict the expected flux of antinuclei due to the background.Fig. 4Results of ToMCCA in different multiplicity classes, for the transverse momentum spectra of protons (top left) and deuterons (top right), and the coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 (bottom), compared with data measured by ALICE. The values of the average charged-particle multiplicity corresponding to each multiplicity class in the three different collision energies are indicated in the legend. The values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 are scaled for better visibility, by the following factors, going from the top to the bottom: 42, 16, 8, 4, 2, 1Fig. 5Results of ToMCCA in the multiplicity class VI, VII, and VI+VII, respectively, for pp \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s} =$$\end{document}s= 5, 13, and 7 TeV, for the transverse momentum spectra of protons (top left) and deuterons (top right), and the coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 (bottom), compared with data measured by ALICE. The values of the average charged-particle multiplicity corresponding to each multiplicity class (VI, VII, and VI+VII) in the three different collision energies are indicated in the legend Results of ToMCCA in different multiplicity classes, for the transverse momentum spectra of protons (top left) and deuterons (top right), and the coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 (bottom), compared with data measured by ALICE. The values of the average charged-particle multiplicity corresponding to each multiplicity class in the three different collision energies are indicated in the legend. The values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 are scaled for better visibility, by the following factors, going from the top to the bottom: 42, 16, 8, 4, 2, 1 Results of ToMCCA in the multiplicity class VI, VII, and VI+VII, respectively, for pp \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s} =$$\end{document}s= 5, 13, and 7 TeV, for the transverse momentum spectra of protons (top left) and deuterons (top right), and the coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 (bottom), compared with data measured by ALICE. The values of the average charged-particle multiplicity corresponding to each multiplicity class (VI, VII, and VI+VII) in the three different collision energies are indicated in the legend Using the resulting proton and deuteron momentum distributions, the coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_A$$\end{document}BA can be computed. It is obtained from the ratio of the invariant yield of the nucleus with mass number A and that of the protons squared, assuming protons and neutrons have the same momentum distributions as they are isospin partners, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{\mathrm T}^{\mathrm p}$$\end{document}pTp = \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{\mathrm T}^{A}$$\end{document}pTA/A12\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\begin{aligned} B_{A} = { \biggl ( \dfrac{1}{2 \pi p^{A}_{\mathrm T}} \biggl ( \dfrac{ \textrm{d}^2N}{\textrm{d}y\textrm{d}p_{\mathrm T}} \biggr )_{A} \biggr )} \bigg /{ \biggl ( \dfrac{1}{2 \pi p^{p}_{\mathrm T}} \biggl ( \dfrac{\textrm{d}^2N}{\textrm{d}y\textrm{d}p_{\mathrm T}} \biggr )_{p} \biggr )^A}. \nonumber \\ \end{aligned}$$\end{document}BA=(12πpTA(d2NdydpT)A)/(12πpTp(d2NdydpT)p)A.The resulting coalescence parameters are shown in the bottom panels of Figs. 4 and 5, in comparison with ALICE measurements. Also in this case, the predictions of ToMCCA are in excellent agreement with the experimental results (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<1\sigma $$\end{document}<1σ). Comparison with data as a function of multiplicity The results shown in Sect. 4.1 can be obtained for arbitrary multiplicity. Hence, it is possible to scan the full range of average charged-particle multiplicity per event covered by pp collisions from \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim 1$$\end{document}∼1 up to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim 70$$\end{document}∼70. Using the deuteron and proton \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{\textrm{T}}$$\end{document}pT distributions obtained with ToMCCA, the coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 is computed, as well as the deuteron-to-proton ratio of the integrated yields (d/p). Selecting one value of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p_{\textrm{T}}/A$$\end{document}pT/A, the predictions for the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 of ToMCCA are shown as a function of multiplicity in Fig. 6, and compared with the data measured by ALICE. Similarly, the d/p integrated yield ratios are shown as a function of multiplicity in Fig. 7. The predictions from ToMCCA show excellent agreement with the data, within 1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sigma $$\end{document}σ, for both the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 and the d/p ratio.Fig. 6Coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 as a function of multiplicity predicted by ToMCCA (red line), compared with the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 measurements from ALICE. The blue markers show the data included in the parametrizations, while the green markers show the ones not included. The dotted line is the model prediction of Ref. [37], where the coalescence parameter for deuterons with a size of 3.2 fm is computedFig. 7Deuteron-to-proton ratio of integrated yields as a function of multiplicity obtained with ToMCCA (red solid line), compared with measurements of the ALICE Collaboration. The width of the model predictions reflects the statistical uncertainties. The dotted line is the model prediction of Ref. [14]Fig. 8Correlation coefficient for antiprotons and antideuterons (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯) as a function of the cubic root of the charged-particle multiplicity, predicted by ToMCCA, with the three different hadronization models, compared with the ALICE measurements in Pb–Pb collisions [42] Coalescence parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 as a function of multiplicity predicted by ToMCCA (red line), compared with the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$B_2$$\end{document}B2 measurements from ALICE. The blue markers show the data included in the parametrizations, while the green markers show the ones not included. The dotted line is the model prediction of Ref. [37], where the coalescence parameter for deuterons with a size of 3.2 fm is computed Deuteron-to-proton ratio of integrated yields as a function of multiplicity obtained with ToMCCA (red solid line), compared with measurements of the ALICE Collaboration. The width of the model predictions reflects the statistical uncertainties. The dotted line is the model prediction of Ref. [14] Correlation coefficient for antiprotons and antideuterons (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯) as a function of the cubic root of the charged-particle multiplicity, predicted by ToMCCA, with the three different hadronization models, compared with the ALICE measurements in Pb–Pb collisions [42] Prediction of the Pearson correlation coefficient In Fig. 8, the predicted Pearson correlation coefficient for antiprotons and antideuterons (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯), as defined in Eq. 7, is shown. The predictions of ToMCCA are shown for the three hadronization models described in Sect. 2.2.3, i.e., tuned emission, string fragmentation, and uncorrelated emission, within a multiplicity range of up to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N_{\mathrm{{ch}}}=44$$\end{document}Nch=44. The source size, determined by the fit from the tuned emission model and used consistently throughout this paper, is used to calculate the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯ regardless of the hadronization model, in order to isolate the effect of baryon number suppression on the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯. These predictions are compared with measurements by the ALICE Collaboration in Pb–Pb collisions at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sqrt{s}_{\textrm{NN}} =$$\end{document}sNN= 5.02 TeV [42]. The data points indicate that a nonzero \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯ is necessary to match the observed suppression. However, it remains unclear whether the transition from pp to Pb–Pb collisions is smooth. Future measurements of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯ in pp collisions could provide constraints on \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\rho _{\overline{\textrm{p}}\overline{\textrm{d}}}$$\end{document}ρp¯d¯. Conclusions In this paper, we have introduced ToMCCA (toy Monte Carlo coalescence afterburner), a toy Monte Carlo model for coalescence based on the Wigner function formalism. Our results show that ToMCCA is able to predict deuteron yields with precision better than 5% if all the required parameters, namely the charged-particle multiplicity, nucleon momentum distributions, angular correlations, and the two-nucleon source size, are provided from parameterizations of experimental measurements. The results of this model demonstrate that ToMCCA can be used for arbitrary center-of-mass energy of pp collisions, as the coalescence predictions depend only on the average multiplicity of the event rather than on the collision energy. This would be useful for astrophysical studies, enabling the prediction of antinuclear fluxes in cosmic rays at the multiplicities corresponding to the energies at which antinuclei are produced in the collisions of ISM and CRs. This is key for disentangling the contribution of dark matter annihilations from the Standard Model background, for correctly interpreting future measurements of antinuclear fluxes in cosmic rays. Due to its lightweight nature and minimal complexity, ToMCCA can also be easily extended to study more complex phenomena related to light nuclei formation, either towards other collision systems, lower collision energies or lower multiplicities or towards heavier nuclei, as long as their wavefunction is known.