Three dimensional study for entropy optimization in nanofluid flow through a compliant curved duct: A drug delivery and therapy application Authors: FM Allehiany, Arshad Riaz, Sadia Shoukat, Ghaliah Alhamzi, Emad E Mahmoud Published: 2023 ABSTRACT AbstractThis research explores the three-dimensional characteristics of nanofluid dynamics within curved ducts, in contrast to earlier studies that mainly focus on two-dimensional flow. By using this ground-breaking method, we can capture a more accurate depiction of fluid behavior that complies with the intricate duct design. In this study, we investigate the three dimensional flow and entropic analysis of peristaltic nanofluid flows in a flexible curved duct, comparing the effects of silver and copper nanoparticles. To obtain accurate results, we assume physical constraints such as long wavelength and low Reynolds number and used a perturbation technique through NDSolve commands for finding exact solutions of the obtained differential equations. A comprehensive error analysis is provided through residual error table and figures to estimate a suitable range of the physical factors. Our findings indicate that the velocity of the nanofluid is directly proportional to the elasticity of the walls, while the mass per unit volume inversely affects velocity. We show that reducing the aspect ratio of the duct rectangular section can decrease entropy generation by raising magnitudes of damping force exerted by to the flexible walls of the enclosure. Additionally, using a larger height of the channel than the breadth can reduce stream boluses. The practical implications of this study extend beyond turbines and endoscopy to biomedical processes such as drug delivery and microfluidic systems.Keywords: Peristaltic flow, Curved duct, Perturbation solutions, Entropy analysis, Compliant walls, Nanofluid Introduction Peristalsis is a vital mechanism that involves the movement of materials in various biological processes in the human body. Because of its widespread benefits, many scientists are now exploring peristaltic flows. The article by Vaidya et al. [1] examines blood flow analysis through a non-uniform inclined channel by treating blood as a non-Newtonian Phan-Thien-Tanner (PTT) liquid. The authors found that peristaltic flows at low Reynolds numbers and large wave number have approached significant attention in recent years. In another work, Nadeem et al. [2] established an exact solution data against the governing system of peristaltic flows, thermal, and mass exchange using a sinusoidal channel. The contributors presented axially symmetric and parabolic velocity, concentration, and temperature profiles. These studies demonstrate the importance of understanding peristaltic flows in various biological processes and their applications. Furthermore, they highlight the requirement for accurate quantitative models and methods of solution to examine the complex behavior of fluids in peristaltic motion. The article by Hasona et al. [3] investigates the effects of thermal radiation and electrical conductivity on the peristaltic flow of a Carreau Nanofluid. Thermal radiation is found to be a decreasing function of fluid temperature, according to the scientists. Peristaltic flow is a sort of fluid motion that physicists, mathematicians, and engineers frequently study, particularly in the context of peristaltic pumps. There is a substantial amount of work on the characteristics of such liquids in peristaltic pumping, as illustrated by Refs. [[4], [5], [6]]. Noreen et al. [7] examine the influence of a magnetic field on peristaltic flow in a Casson fluid model in another study. A lubrication scheme is executed to examine the flow characteristics. The scientists analyzed that when the Hartmann number M increases towards the channel walls, so does the velocity field, whereas it decreases in the channel center. Overall, these investigations show the complex behaviour of fluids in peristaltic motion and illustrate the need of taking into account elements like heat radiation, electrical conductivity, and magnetic fields when researching such systems. The flow of fluids across curved geometries occurs often in several domains, including microfluidics, industrial ducts, and medical equipment. Essentially, peristaltic flows—which include manipulating walls to contract and expand and promote the transit of items like blood, urine, food, and sperm—are what drive the majority of material movement through the body. This is essential to many biological activities. Researchers have conducted multiple studies to examine the effects of various viscosities and geometries on peristaltic flows. A curved conduit with changing viscosity model and electro-osmotic effects were used by Salahuddin et al. [8] to work on the peristaltic movement of carbon nanotubes. They found that increasing the viscosity parameter decreased flow velocity and temperature while altering the temperature profile for carbon nanotubes (CNTs) by increasing the heat absorption value. Additional studies have looked at peristaltic movement calculations in curved shapes using mathematical models. While McCash et al. [9] looked at the mathematical model of peristaltic flow in an elliptic duct with ciliary walls, Barton and Raynor [10] provided a theoretical analysis of wavy movement in tubes. The distribution of velocity and temperature profiles showed axial symmetry in both cases, the authors found. Studies in Refs. [[11], [12], [13]] have described peristaltic transports in curved enclosures for a variety of fluid models. The effect of curvature-dependent channel walls on laminar viscous material flow peristalsis through a curved geometry was investigated by Saba et al. [14]. The researchers found that when modeling flows in curved channels, the curvature parameter should be taken into account because it has a significant impact on the mechanical and thermal characteristics of the flow. These works highlight the significance of investigating the effects of curvature and changing viscosity on peristaltic flows in curved geometries as well as the requirement for accurate mathematical models and solution methodologies to comprehend these challenging systems. Small, fewer than 100 nm-diameter-diameter particles are known as nanoparticles. Nanoparticles like carbon nanotubes (CNTs) have the potential to revolutionize medical imaging, treatments, diagnostics, and other biological processes because of their small size and physical interaction with biological components. However, the low thermal conductivity of fluids typically limits the industrial applications of heat transfer analysis. To solve this problem, the amount of nanoparticles in the fluid might be increased. An experimental study by Choi and Eastman [15] shown how adding nanoparticles to a fluid can enhance its thermal conductivity, viscosity, thermal diffusivity, and heat transfer rate [ [16,17]]. Using ion-slip and Hall effects, Qureshi et al. [18] calculated the dispersion of nanoparticles in magnetohydrodynamic (MHD) liquid. According to Akram et al. [19], the addition of nanoparticles to base liquids alters the thermal properties and viscosity of the resulting nanoliquids. Viscosity is a significant industrial economic variable. Some more interesting works on the topic can be cited in [[20], [21], [22], [23], [24]]. The majority of flows in the medical industry and in the human body are by their very nature three-dimensional. Due to the relevance of three-dimensional peristaltic flows to both the mechanics of roller pumps and blood flow within arteries, research has concentrated on these flows. Nadeem et al. [25], explored the effect of intricate conduits on pumping flow was investigated by resolving the resulting coupled and nonlinear equations numerically and by series solutions. In order to account for low Reynolds number and long wavelength restrictions, Ellahi et al. [26] carried out a theoretical examination of the impact of magnetohydrodynamics on the peristaltic flow of Jeffrey fluid in a rectangular duct. The mathematical model for the peristaltic flow of Jeffrey fluid containing nanoparticles in a three dimensional conduit was examined in the wave frame in another work by Nadeem et al. [27]. The peristaltic flow of a pair stress fluid in a non-uniform rectangular duct with compliant walls was also studied by Ellahi et al. [28] in their final study. Entropy, which counts the different ways a thermodynamic system can be built, is a commonly used thermodynamics term that is frequently used to indicate the degree of disorder or the advancement of thermodynamic equilibrium. Understanding and raising the effectiveness of energy conversion technology, such as heat exchangers and combustion engines, are applications of entropy generation in fluid flow. Entropy generation analysis can help with the design and optimization of microfluidic devices and drug delivery systems in the medical profession. Overall, improving energy efficiency and creating efficient technologies in a variety of disciplines depend on research into entropy formation in fluid movement. Researchers have investigated the creation and prediction of entropy in a variety of flow conditions in non-Newtonian fluids. While Ellahi et al. [29] researched the peristaltic flow of nanofluid with entropy formation in a porous media; Abu-Hijleh et al. [30] investigated the numerical prediction of entropy generation from natural convection in a horizontal cylinder. Hayat et al. [31] looked into the impact of entropy generation on the peristaltic flow of nanoparticles in a rotating frame, whereas Reddy et al. [32] researched entropy production for the peristaltic flow of gold-blood nanofluid under electrokinetic force in a microchannel. In order to study entropy formation in peristaltic flow utilizing single and multi-wall carbon nanotubes, Ijaz Khan et al. [33] utilized numerical simulations. Numerous biomedical and industrial industries use peristaltic flows in curved conduits. For instance, they are employed in artificial organs, bioreactors, microfluidics, and drug delivery systems. Peristaltic pumps are used in medicine delivery to accurately control the flow rate of pharmaceuticals. They are employed in microfluidics to mix and move fluids. Peristaltic flows are employed in bioreactors to produce an environment that is conducive to the growth of microorganisms. Peristaltic flows are utilized in artificial organs to replicate the body's normal blood flow. There are a few more recent researches on the subject that may be found in Refs. [[34], [35], [36]]. The explanation above makes it clear that little research has been done on the peristaltic process of nanofluid in curved duct sections. But a study of this kind would be very helpful for both biomedical and commercial uses. Understanding peristaltic flows in curved ducts is essential since most flow patterns are curved in shape. Additionally, because it may improve the thermal conductivity of ordinary fluids, the usage of nanofluids is becoming more and more significant in the medical industry. In this inquiry, peristaltic nanofluid flows in a curved duct with rectangular sides and flexible walls are studied in three dimensions to address these problems. To examine how different types of nanoparticles affect wavy flows, copper and silver nanoparticles are taken into consideration. The physical structure is mathematically represented under specific constraints in order to analyze the issue statistically, and then linear transformations are used to add a non-dimensional collection of new factors. By doing this, a complex system of equations is reduced to a manageable, concise set. The series solution technique is then used to solve the issue. The results are thoroughly described in the concluding section, and essential amounts are visually displayed with respect to specific criteria. This study is anticipated to shed important light on the peristaltic flows of nanofluids in curved ducts and has the potential to significantly affect biomedical and industrial applications. Mathematical modeling In this work, we take into account the flow of a viscous nanofluid in a curved rectangular duct (CRD) that has a 2h height and 2d width. Water is mixed with silver (Ag) and copper (Cu) nanoparticles, and a peristaltic wave travels along the axial direction at a constant speed of c. As a function of angle and time t, the conduit's geometry is set up so that orthogonal line (y-axis) assumes the peristaltic walls, L stands for the reference distance from the center line. The cylindrical coordinate system is more practical because the flow geometry is curved. The lower walls' temperature is given a magnitude of T1, whereas the lower portion has a temperature of T0 (see Fig. 1). Geometrical picture of the CRD. We consider the curved duct model for the nanofluid as [ [8,12,17,24,[37], [38], [39]]]. A representation of the peristaltic walls is [ [38,39]] The nomenclature table contains the parameters that are mentioned in the problem. The following transformations are performed to eliminate problem dimensions that complicate the system: By incorporating the aforementioned modifications into equations (1), (2), (3), (4), (5), (6), we obtain The parameters generated above that are dimensionless are defined as The wave-like border given in equation (6) takes on a dimensionless form Adjusting the lubrication approximation, i.e., (ξ=0), equations (8), (9), (10), (11), (12) provide (the bar symbols excluded) Here is a description of the thermophysical characteristics of nanofluid [28,40,41] The boundary conditions are chosen by employing no-slip conditions, which maintain velocity at the walls with the static walls as [[37], [38], [39]]. The peristaltic walls are now thought to constitute a complaint, and their basic equation is Compliant walls are viewed in dimensionless form as [ [12,13,28,37]] where a is given in equation (13) and Table 1 lists the physical characteristics of base fluid and nanoparticles: Table 1Thermo-physical factors of nanofluid [40, 41].Table 1k(W/mk)ρ(kg/m3)cp(J/kgk)ρcp(j/m3k)Silver (Ag)42910,4902352465150Copper (Cu)40189333853439205Water (H2O)0.613997.141794166880.9 Thermo-physical factors of nanofluid [40, 41]. Method of solution Equations (14), (15), (16), (17), (18), (19), (20), (21), (22), which were systems of equations and boundary conditions, are mixed partial differential equations having variable coefficients. The boundary conditions also depend on the boundary expression a(θ,t), hence a perfect or numerical solution to this problem is not achievable. The issue can, however, be resolved quantitatively. We have a highly effective analytic series solution approach called the homotopy perturbation method [42], which is based on topology and perturbation theory. The kind of complex PDEs that are being described here might have solutions thanks to this technique. Following, in the proper order, is the deformation equation for the momentum equation (15) and the energy equation (17): The x-operator Lxx and the y-operator Lyy (shown below) are two alternative types of linear differential operators that can be used in the aforementioned equations; however we chose the y-part of derivative to be a linear operator for the heat equation (17). For momentum equation (15), on the other hand, the following defined linear operator L is used to provide the most accurate results. Below is an initial approximation for the velocity function w and temperature function given in equation (26) Taking the embedding parameter p* into consideration, consider the following perturbation equation The zeroth order systems are then obtained by applying the aforementioned series to the respective deformation equations (23), (24) a with operator defined in equation (25) and equating the coefficients of exponents of p*. with boundary limits whose surface equations are The first order sets of equations are structured as The boundary relations are given as and along with the limitations After handling Eqs. (28), (32) by incorporating equations (29), (33), we receive By solving Eqs. (30), (31), (34), (34), (35), we collect where the constants appearing in equations (36), (37), (38), (39) are given as C[7]=−1/(2a)(−1/(12(1+δx)4kfμf)a(6a2(1+δx)4knfμf+3/2e2aαδ1+δx(1+δx)2(3+δ(6x+3x2δ+2a2α2δ))ηC[1]2kfμnf−2a4α4δ4ηC[1]C[2]kfμnf+3/2e−2aαδ1+δx(1+δx)2(3+δ(6x+3x2δ+a2α2δ))ηC[2]2kfμnf)−1/(12(1+δx)4kfμf) C[8]=−1/(16a(1+δx)2μf)e−2aαδ1+δx(3ηC[1]2μnf−3e4aαδ1+δxηC[1]2μnf+6xδηC[1]2μnf−6e4aαδ1+δxxδηC[1]2μnf+3x2δ2ηC[1]2μnf−3e4aαδ1+δxx2δ2ηC[1]2μnf+2a2α2δηC[1]2μnf−2a2e4aαδ1+δxα2δ2ηC[1]2μnf−3ηC[2]2μnf+3e4aαδ1+δxηC[2]2μnf−6xδηC[2]2μnf+6e4aαδ1+δxxδηC[2]2μnf−3x2δ2ηC[2]2μnf+3e4aαδ1+δxx2δ2ηC[2]2μnf−2a2α2δηC[2]2μnf+2a2e4aαδ1+δxα2δ2ηC[2]2μnf.. Final form of the solutions can be found by using the limitation of p*→1 in. C[8]=−1/(16a(1+δx)2μf)e−2aαδ1+δx(3ηC[1]2μnf−3e4aαδ1+δxηC[1]2μnf+6xδηC[1]2μnf−6e4aαδ1+δxxδηC[1]2μnf+3x2δ2ηC[1]2μnf−3e4aαδ1+δxx2δ2ηC[1]2μnf+2a2α2δηC[1]2μnf−2a2e4aαδ1+δxα2δ2ηC[1]2μnf−3ηC[2]2μnf+3e4aαδ1+δxηC[2]2μnf−6xδηC[2]2μnf+6e4aαδ1+δxxδηC[2]2μnf−3x2δ2ηC[2]2μnf+3e4aαδ1+δxx2δ2ηC[2]2μnf−2a2α2δηC[2]2μnf+2a2e4aαδ1+δxα2δ2ηC[2]2μnf.. Final form of the solutions can be found by using the limitation of p*→1 in equation (27). Entropy analysis The standard shape of entropy equation is [29–33] In component form, equation (40) can be expressed as Using formulas displayed in Eq. (7) in aforementioned equation (41), we have Injecting physical constraint of small wave number in equation (42), we have where NS in equation (43) is entropy generation number and some new found expressions are stated below Bejan number Be is the ratio of heat entropy and the whole system entropy and is given below in equation (44) Results and discussion In this section, we've made a number of graphs that illustrate how different physical characteristics like temperature, velocity, entropy production, Bejan number, and stream function affect different profiles. We can learn about the behavior of the system under examination by studying these graphical elements. We have supplied Fig. 2(a-d)–10 in order to investigate the study's findings. By developing residual error changing charts, Fig. 2 suggests the parametric value ranges of certain relevant problem components. Fig. 3, Fig. 4 depict velocity fluctuations with respect to coordinate y, allowing us to observe the impacts of the curvature aspect ratio, amplitude ratio, elastic tension E1, and mass per unit volume E2. Temperature profiles for various values of the parameter δ and E1 are shown in Fig. 5, Fig. 6. Furthermore, we used Fig. 7, Fig. 8 to show the entropy generation curves, which show the system's irreversible losses. Fig. 9, Fig. 10 examine the Bejan number, which is a measure of the system's heat transmission efficiency. Finally, Fig. 11, Fig. 12 show the streamlines, which provide a visual representation of the system's flow patterns. We may acquire a full understanding of the system's behavior under various conditions by evaluating all of these graphs together. Residual error curves (a) for φ (b) for δ (c) for E1 (d) for E2. Axial velocity variation with respect to aspect ratio δ and φ, (a) two dimensional (b) three dimensional. Axial velocity variation with respect to the elastic tension E1, (a) two dimensional (b) three dimensional. Heat transfer for the aspect ratio δ (a,b) for silver particles. Heat transfer for E1 (a,b) for silver particles. Entropy generation for mass per unit area E2. Entropy generation for damping force E3. Bejan number for the curvature α. Bejan number for the elastic tension E1. (a,b,c): Flow pattern for E1. (a,b,c): Flow pattern for δ. Residual error In this part, we draw a Table 2 and sketch graphs for various graphs showing the accuracy of the results collected through the solution section. From the table and graphs we can also imagine about possible ranges of the parameters on which the solution remains convergent. In this regard, Fig. 2 is placed with part (a) showing curves of residual error for the aspect ratio factor φ (b) for the curvature ratio δ (c) for the elastic tension E1 and (d) for the mass per unit volume constant E2. It can be demonstrated from these figures that if we fix an upper error bound as E≤1.4×10−7, the possible parametric intervals satisfying the prescribed error bound suggest that the approximate suitable range are 0≤φ≤1,0.1≤δ≤3.1,1≤E1≤2,0≤E2≤1.. Table 2Method's convergence and valid parametric range.Table 2Fixed parametersParametric rangeResidual error |RE|≤1.4×10−7μf=3.55,α=0.1,z=0.3,t=0.6,φ=0.8,E3=1.1,x=0.2,y=0.5φδE1E20.00.10.120.11.4512×10−90.28.30717×10−100.44.04675×10−100.61.46851×10−100.82.59599×10−111.00.00000000.10.10.120.19.91356×10−100.91.05491×10−71.71.44462×10−72.51.45316×10−73.31.36395×10−74.11.25685×10−74.91.15439×10−70.10.1210.17.33872×10−91.28.60743×10−91.49.87613×10−91.61.11448×10−81.81.24135×10−821.36822×10−80.10.12106.70437×10−90.27.97307×10−90.49.24178×10−90.61.05105×10−80.81.17792×10−81.01.30479×10−8 Method's convergence and valid parametric range. Flow velocity Fig. 3(a and b) illustrates that the velocity decreases as the curvature aspect ratio δ and amplitude ratio φ increase. A curved duct's aspect ratio is the ratio of its radius of curvature to its hydraulic diameter. The diameter of a circular pipe with the same cross-sectional area as the duct is described as the hydraulic diameter. A curved duct's aspect ratio can have a substantial impact on the axial velocity of the fluid flowing through it. A smaller aspect ratio (i.e., a tighter curvature) can lead to higher axial velocity, whereas a wider aspect ratio (i.e., a more gradual curvature) can lead to lower axial velocity. Because of the way fluid travels via a curved conduit, this effect happens. This centrifugal force causes the fluid velocity to increase perpendicular to the direction of flow, causing the axial velocity to decrease. As a result of this centrifugal force, the fluid velocity, perpendicular to the flow direction is rising while falling in the axial direction. Conversely, when the aspect ratio is larger, the centrifugal force is weaker, and the decrease in axial velocity is less pronounced. In practical applications, the effect of aspect ratio on axial velocity can have important implications for the design and performance of duct systems. For example, in fluid transport systems, a more gradual curvature (i.e., larger aspect ratio) may be necessary to prevent excessive turbulence and pressure losses. Fig. 3 also shows that the velocity varies inversely with the bigger the influence of the amplitude ratio φ. This underlines the physical fact that a larger amplitude of the peristaltic wave than the duct height results in a slower fluid flow. This is explained by the fact that a larger peristaltic wave transmits more energy to the fluid particles in the vertical direction to the flow side, resulting in a decrease in their velocity. This figure also contains a three dimensional graph of the velocity which reflects that in the axial direction of z-axis, the velocity curves are showing sinusoidal wave nature which represents that in a small interval 0