Genome-Wide Analysis of Flax (Linum usitatissimum L.) Growth-Regulating Factor (GRF) Transcription Factors Authors: Jianyu Lu, Zhenhui Wang, Jinxi Li, Qian Zhao, Fan Qi, Fu Wang, Chunxiao Xiaoyang, Guofei Tan, Hanlu Wu, Michael K. Deyholos, Ningning Wang, Yingnan Liu, Jian Zhang Published: 2023 ABSTRACT Flax is an important cash crop globally with a variety of commercial uses. It has been widely used for fiber, oil, nutrition, feed and in composite materials. Growth regulatory factor (GRF) is a transcription factor family unique to plants, and is involved in regulating many processes of growth and development. Bioinformatics analysis of the GRF family in flax predicted 17 LuGRF genes, which all contained the characteristic QLQ and WRC domains. Equally, 15 of 17 LuGRFs (88%) are predicted to be regulated by lus-miR396 miRNA. Phylogenetic analysis of GRFs from flax and several other well-characterized species defined five clades; LuGRF genes were found in four clades. Most LuGRF gene promoters contained cis-regulatory elements known to be responsive to hormones and stress. The chromosomal locations and collinearity of LuGRF genes were also analyzed. The three-dimensional structure of LuGRF proteins was predicted using homology modeling. The transcript expression data indicated that most LuGRF family members were highly expressed in flax fruit and embryos, whereas LuGRF3, LuGRF12 and LuGRF16 were enriched in response to salt stress. Real-time quantitative fluorescent PCR (qRT-PCR) showed that both LuGRF1 and LuGRF11 were up-regulated under ABA and MeJA stimuli, indicating that these genes were involved in defense. LuGRF1 was demonstrated to be localized to the nucleus as expected for a transcription factor. These results provide a basis for further exploration of the molecular mechanism of LuGRF gene function and obtaining improved flax breeding lines. 1. Introduction Growth-regulating factors (GRFs) are small transcription factors that plays an important role in biological processes such as plant growth, development and stress response [1,2]. The N-terminal region of a GRF has two conserved domains, QLQ (Glu, Leu, Glu) and WRC (Trp, Arg, Cys). The QLQ domain interacts with the SYT N-terminal homology domain (SNH) of GRF-interacting factors (GIFs) to form a functional GRF–GIF complex [3]. The amino acid sequence of the WRC domain is more highly conserved than QLQ, containing a nuclear localization signal domain and a C3H-type zinc finger domain, which can be combined with the cis-acting elements of downstream genes to regulate the temporal and spatial expression of genes [4]. Compared with the N-terminus, the C-terminus of the GRF protein varies widely: motifs such as TQL (Thr, Gln, Leu), GGPL (Gly, Gly, Pro, Leu) and FFD (Phe, Phe, Asp) often appear in the C-terminal end of the protein, although these are not highly conserved [5,6]. In addition, most GRF genes described to date are targets of miR396, and post-transcriptional regulation of miR396/GRFs is prevalent in plants [7,8,9]. The first GRF gene cloned was OsGRF1 from rice (Oryza sativa), which is induced by gibberellin in the internode meristem, thus promoting stem elongation [10]. GRF genes are generally members of small gene families within each species. With the completion of sequencing for many plant genomes, the GRF gene family has been identified in many plants, including Arabidopsis thaliana [5], Glycine max [11], Ananas comosus [12], Solanum lycopersicum [13], Nelumbo nucifera [14] and Panax ginseng [15]. However, the identification of GRF genes in flax has not been studied. Different members of the GRF family show different expression patterns in different parts of the plant. Generally speaking, the expression levels of GRFs are higher in the tissues or organs that have active growth, and gradually decrease during the maturation of the organs [5,7]. Some GRF genes are also responsive to stress in various tissues and organs [16,17]. For example, AtGRF7 can inhibit Dehydration Response Element Binding 2A (DREB2A) to regulate plant responses to osmotic stress [2]. Within a species, different GRF members show both functional redundancy and functional differentiation [1]. In Arabidopsis thaliana transgenic lines overexpressing AtGRF1 or AtGRF2, the cotyledon and leaf sizes increase significantly due to an increase in cell size, while the overexpression of AtGRF5 increases the leaf area by increasing the number of cells. Thus, GRF transcription factors can regulate organ size by regulating cell expansion or proliferation [5,18]. Compared with the wild type, the cotyledon and rosette leaf areas of Arabidopsis triple mutants grf1/grf2/grf3 were significantly reduced, while the single-gene mutants showed no significant phenotypic differences, indicating that these genes have functional redundancy [19]. AtGRF9 negatively regulates the leaf size by inhibiting cell proliferation [20]. Overexpression of OsGRF4 in rice will increase the grain width, grain length and ear length related to rice yield [21,22,23], while the inhibition of OsGRF3, OsGRF4 and OsGRF5 expression will shorten rice plants and delay the inflorescence development time [24]. OsGRF1 and OsGIF1 coordinate to regulate the internal and external conditions of rice leaf growth, thus affecting leaf growth [25]. In Gossypium herbaceum, the expression of GhGRF3, GhGRF4, GhGRF5, GhGRF7 and GhGRF16 decreased under salt stress treatment, suggesting that they play a regulatory role in growth and development under abiotic stress conditions [26]. Flax (Linum usitatissimum L.) is an ancient bast fiber crop and oil crop and is widely cultivated especially in China, Canada, France, Russia, Ukraine, the United States, Argentina, etc. [27]. According to their intended end use, flax varieties can be classified into three types: oil, fiber and dual-purpose [28,29]. Flaxseed (linseed) is rich in lignans, dietary fiber, protein and other nutrients, including α-linolenic acid, which at 55% by weight is one of the best sources of ω-3 fatty acids for human nutrition [30]. Until now, there have been no reports about the GRF genes in flax. In this study, flax GRF family genes were systematically surveyed and their physicochemical properties, sequence characteristics, phylogeny, promoter cis-acting elements and gene expression patterns were analyzed, which provided the basis for further study of biological functions of flax GRF genes. This is the first comprehensive study reported on flax GRFs. 2. Results 2.1. Identification and Phylogenetic Analysis of Flax GRF Gene Family Members A total of 17 GRF family genes were identified in the genome of flax (var. Longya10). This was accomplished via the alignment of predicted flax genes with GRF genes from Arabidopsis thaliana. All 17 predicted LuGRF proteins were confirmed to contain the WRC (PF08879) and QLQ (PF08880) domains. These genes were named LuGRF1-LuGRF17 according to their chromosomal positions. In terms of physical and chemical properties, the longest proteins were LuGRF2 and LuGRF11, which each contained 496 amino acids, and the smallest protein was LuGRF8, which contained 151 amino acids. The molecular weight of LuGRF protein was predicted to be between 17.64 and 55.7 kDa. Of the proteins encoded by the LuGRF gene family, 88% had a pI greater than 7, indicating that most of the proteins encoded by the flax GRF gene family were rich in basic amino acids. The instability index ranged from 50.02 to 77.55, indicating that GRFs are probably unstable proteins. The aliphatic index of LuGRF proteins ranged from 49.57 to 75.16. Hydropathicity analysis showed that all LuGRF proteins were hydrophilic proteins. Subcellular localization predicted that all LuGRF genes were expressed in the nucleus (Table 1). To better understand the evolutionary relationship between GRF genes in different species, the maximum likelihood (ML) method was used to construct a phylogenetic tree of 51 GRF genes from Arabidopsis thaliana (9), Zea mays (16), Oryza sativa (9) and flax (17) (Figure 1). The results showed that the 51 GRF genes could be divided into five subfamilies, which were named I–V. Subfamilies I through IV contained GRF clusters of monocotyledonous and dicotyledonous plants, while subfamily V contained GRF clusters of monocotyledonous plants only. The 17 LuGRF genes were distributed in every subfamily except subfamily V. The most numerous genes were in subfamily IV, which included five members: LuGRF3, LuGRF4, LuGRF12, LuGRF14 and LuGRF15. At the same time, it was found that all flax GRF gene families are closely associated with Arabidopsis, which proved that the flax and Arabidopsis GRF families were the most closely related among these five species. 2.2. Analysis of LuGRF Gene Structure and Conserved Domain Analysis of the LuGRF gene structures showed the number of exons was between two and six, among which LuGRF13 and LuGRF2 contained six and five exons, respectively; LuGRF8, LuGRF15 and LuGRF15 all contained three exons; both LuGRF3 and LuGRF12 had two exons and the rest of the LuGRF gene family had four exons (Figure 2D). The exon and intron structure was generally conserved within each of the subgroups I–IV. Analysis of the conserved domains of flax GRF genes showed that the WRC and QLQ conserved domains were found in all flax GRF family members (Figure 2C). A total of 10 conserved motifs of those predicted using MEME were found within flax GRFs (Figure 2B). The results showed that all LuGRFs contained motif 1, 2 and 3; 14 GRFs contained motif 4; and 8 GRFs contained motif 9, which constituted the typical conserved regions of the LuGRF gene family. Motif 5 and motif 7 were specific to their GRF clades. 2.3. Chromosomal Localization and Collinearity Analysis of LuGRF Gene Family The 17 flax GRF genes were unevenly distributed in 10 out of 15 flax chromosomes (Figure 2E). Three of the genes were distributed on chromosome 3; chromosomes 1, 5, 7 and 10 contained two LuGRF genes and chromosomes 4, 6, 9 and 14 all contained one LuGRF gene. Gene duplication often results in genetic mutations that lead to new functions and play a key role in plant adaptation. To study gene duplication events in the history of the LuGRF family, TBtools was used to construct Circos maps (Figure 3A). The map shows five duplicate gene pairs within the LuGRF gene family: LuGRF1-LuGRF10; LuGRF3-LuGRF12; LuGRF4-LuGRF14; LuGRF5-LuGRF13; LuGRF14-LuGRF15. These gene pairs may be related to flax WGD (Whole-Genome Duplication) events. The evolutionary relationship between flax and Arabidopsis was also further analyzed, and nine colinear genes were identified in the colinear region of the genome (Figure 3B). The collinearity of chromosomes 2, 4 and 7 of flax was at most 2, and the LuGRF gene was colinear with chromosomes 2, 3 and 4 of Arabidopsis, respectively. 2.4. Cis-Acting Elements and miRNA Prediction We predicted the cis-acting elements 2000 bp upstream of each GRF promoter region in flax and plotted them by removing common elements such as TATA-box and CAAT-box (Figure 4A). The analysis identified 371 cis-acting elements, which could be divided into four categories: development-related elements; environmental-stress-related elements; hormone-responsive elements and light-responsive elements (Figure 4B,C). The major hormone-responsive elements were abscisic-acid-responsive element (ABRE); auxin-responsive element (AuxRR-core and TGA-element); MeJA-responsive element (TGACG-motif and CGTCA-motif); gibberellin-responsive element (P-box and GARE-motif) and salicylic-acid-responsive element (TCA-element). The MeJA-responsive element was the most abundant hormone-related cis-element in the upstream regions of the LuGRF gene family. The second largest category was light-responsive elements, including 131 components such as GT1-motif, G-box and LAMP-element (35.3%). The third category was environmental-stress-related elements with a total of 75 components (20.22%), including an anaerobic induction element (ARE), defense- and stress-responsive element (TC-rich repeats), low-temperature responsive element (LTR), MYB binding site involved in drought inducibility (MBS) and MYB binding site involved in light responsiveness (MRE). The fourth category was development-related elements with 29 components (7.81%), including an endosperm expression element (GCN4_motif), meristem expression element (CAT-box) and MYBHv1 binding site (CCAAT-box). The results of MiRNA target prediction showed that there were 26 miRNA targets in 15 LuGRF genes except LuGRF3 and LuGRF12 (Table 2). Among all LuGRF genes, LuGRF14 had the most miRNA targets at 14. We found that different LuGRF genes could be targeted by the same miRNA in the same subfamily. For example, in subfamily I, LuGRF5, LuGRF6, LuGRF13 and LuGRF17 could be simultaneously targeted by lus-miR396, and they could also be targeted by different miRNAs in the same subfamily. For example, LuGRF6 could be targeted by either lus-miR396 or lus-miR168. Analysis of the cleavage site of miRNA396 showed that miRNA396a and miRNA396c and miRNA396b and miRNA396e had the same cleavage site, and both cut the WRC conserved domain of the LuGRF gene. We also found that only LuGRF8 had two cleavage sites and cut the CDS region (Figure S1). The results showed that lus-miR396 is the main miRNA target of the GRF gene family. 2.5. Structural Characterization and Subcellular Localization of LuGRF Protein The secondary structure predictions shows that the LuGRF protein is composed of an alpha helix, an extended strand and a random coil (Table 3). Random coil amino acids accounted for the highest proportion (47.16–70.87%). This was followed by extended strand amino acids (15.12–25%) and alpha helix amino acids (9.09–31%). Further, 3D protein structure prediction found that all LuGRF family members except LuGRF8 had a similar protein structure (Figure S2), demonstrating that they had similar protein functions. The highly expressed gene LuGRF1 was selected for subcellular localization, and the strains of Agrobacterium tumefaciens EAH105 containing pGD:LuGRF1-RFP and pGD:RFP (control) were inoculated into young tobacco epidermises for transient expression. The results showed that pGD:LuGRF1-RFP was expressed in the nucleus (Figure 5), which was consistent with the predicted results (Table 1). The pGD:RFP was localized both inside and outside of the nucleus. 2.6. GO Enrichment Analysis of LuGRF GO enrichment analysis of LuGRF genes in flax showed that LuGRF gene plays a role in molecular function, cell composition and biological processes (Figure 6A). Among them, the main participants include negative regulation of cell population proliferation, plant organ development, system development cell population proliferation, leaf development, regulation of post-embryonic development and root development and other biological processes. 2.7. Analysis of RNA-Seq Data and LuGRF Gene Expression Profile To investigate the potential functions of the LuGRF gene, we analyzed the expression in publicly available RNA-seq data, and analyzed the expression patterns of flax roots, seeds, stems, embryos, anthers, ovaries, fruits, pistils and stamens in different tissues. The expression of related LuGRF genes was mapped (Figure 6C). The results showed that the expression of the LuGRF gene family was different in different tissues, and most of the family members were expressed in flax fruit. These members are expressed at a low level in the roots and stems, and only LuGRF3, LuGRF16 and LuGRF17 were expressed in the seeds and stamens. Two members (LuGRF6 and LuGRF8) were highly expressed in the heart-stage embryos, while the rest had low or no expression. Three members (LuGRF1, LuGRF6 and LuGRF8) were highly expressed in the globular-stage embryos. LuGRF5, LuGRF13 and LuGRF16 were highly expressed in cotyledon embryos and anthers, and the expression of LuGRF16 was the highest in mature embryos. Only LuGRF4, LuGRF7, LuGRF9 and LuGRF14 were highly expressed in the ovaries, but not in other members. Therefore, LuGRF genes may play a regulatory role in flax fruit and flowering development. Published abiotic RNA-seq data were processed to further study the expression matrix of LuGRF genes in stress response (Figure 6B). The expression of LuGRF genes was relatively high in the root tissues without salt treatment, while the expression was significantly inhibited in the root tissues after salt stress. Compared with the control group, three genes (LuGRF3, LuGRF12 and LuGRF16) of the flax shoot significantly increased in response to salt stress. When the flax stem was subjected to heat stress, compared with the control group, the expression of eight LuGRF genes was found to be increased, among which the expressions of LuGRF4, LuGRF13 and LuGRF14 were significantly increased. 2.8. Plant Hormone Stress and qRT-PCR To verify whether the LuGRF genes play a role in the response of the ABA and MeJA plant hormones, the transcript abundance of 17 LuGRF genes in leaf tissues were measured using qRT-PCR (Figure 7). The gene expression in the leaves was detected at 0 h, 4 h, 8 h, 12 h and 24 h, and the expression levels of 0 h samples were compared (Figure 8). The expression levels of LuGRF1 and LuGRF7 were also significantly up-regulated with the increase in ABA stress time. The expression levels of LuGRF11 reached an extreme value at 4 and 8 h of ABA stress, which increased by about 3.3 times compared with the control. The expression levels of LuGRF12 were the highest at 8 h of ABA stress, which increased by 2.3 times compared with the control. We also found that four genes (LuGRF3, LuGRF8, LuGRF9, LuGRF16) were significantly down-regulated under ABA stress, with the expression of LuGRF3 reaching its maximum value at a stress of 8 h and LuGRF8 reaching its maximum value at a stress of 12 h. The expression levels of LuGRF9 and LuGRF16 were the lowest after a stress of 24 h, which may be related to the negative regulation of ABA. MeJA treatment significantly induced significantly up-regulated expression of two genes (LuGRF1, LuGRF11). The transcription level of LuGRF1 increased by 4.2 times at 12 h, and that of LuGRF11 increased by 2.2 times at 24 h. We also found that five genes were down-regulated, namely LuGRF2, LuGRF3, LuGRF6, LuGRF15 and LuGRF16, whose transcription levels were down-regulated but not significant compared with the control after treatment for 24 h. 3. Discussion GRFs are plant-specific transcription factors that not only play an important role in regulating various plant growth and development processes, but also regulate many aspects of plant stress responses [1,19,31]. However, until now, there have been no reports about the GRF gene family in flax so far. In this study, 17 LuGRF genes were identified based on their similarity to Arabidopsis GRF proteins and the presence of the QLQ and WRC domains. The number of flax GRF genes (17) is more than Arabidopsis (9) or pineapple (8), and similar to the number identified in ginseng (20) and maize (17). This suggests that GRF genes may have undergone sustained family-specific amplification during evolution [5,12,15,32]. Phylogenetic analysis of GRFs from diverse species identified five subfamilies (I–V), and the LuGRF genes were restricted to four of these subfamilies (I–IV) (Figure 1). Members within the same subfamily may have similar functions [33]. For example, overexpression of AtGRF3 increases organ size, and it is speculated that LuGRF6 and LuGRF7 are also involved in organ development [34]. Previous studies have found that overexpression of AtGRF5 and AtGRF6 has a positive effect on the proliferation of transgenic rapeseed (Brassica napus) callus cells, suggesting that LuGRF15 may play an important regulatory role in cell proliferation and differentiation in the leaf primordium of flax cells [35]. Phylogenetic analysis showed that LuGRF genes were clustered in four clades (Figure 2A). Based on motif analysis, motif 1 (WRC) and motif 2 (QLQ) were found in all LuGRF proteins (Figure 2C), and there are different conserved protein motifs in LuGRF proteins. The differences between these subfamilies demonstrate the functional diversity of GRF members [4,5,32]. As shown in Figure 2B, WRC is closely related to other motifs, and it is possible that this domain plays a role in DNA binding. The C-terminal motif of GRF protein plays an important role in different plant tissues and organs [5,15,32]. Flax GRF C-terminal protein can bind to cis-acting elements of downstream genes to regulate the temporal and spatial expression of genes [10]. The N-terminal and C-terminal domains of flax GRF protein participate in plant growth and development [4]. The collinearity analysis of LuGRF showed that there were five gene pairs with repeated fragments (LuGRF1-LuGRF10, LuGRF3-LuGRF12, LuGRF4-LuGRF14, LuGRF5-LuGRF13, LuGRF14-LuGRF15) (Figure 3A). There were also colinear relationships with nine genes of Arabidopsis thaliana (Figure 3B) [14,15,36]. MicroRNA is involved in the regulation of GRF gene expression and is an important factor that negatively regulates GRF gene expression [7]. Previous studies have found that the miR396-GRF module is crucial for controlling the length of rice leaves, and the single-strand DNA corresponding to the sequence of miR396e can effectively down-regulate the expression of GRF in developing leaves, resulting in the shortening of the length of leaves [9]. Inhibition of the expression of Sbi-miR396d/e may increase the expression of SbiGRF1/5/8, affecting the flower organs and seed development of Sorghum bicolor [37]. Overexpression of microRNA396a in Arabidopsis can significantly reduce the expression level of miRNA396 target genes (AtGRF1, AtGRF2, AtGRF3, AtGRF4, AtGRF7, AtGRF8, AtGRF9) and lead to abnormal pistils [8]. miR396 may induce somatic embryo development by controlling tissue sensitivity to auxin treatment [38]. In this study, 15 LuGRFs (88%) were regulated by lus-miR396 (Table 2), suggesting that lus-miR396 may be an important factor negatively regulating GRF gene expression in flax and play an important role in the growth and development of flax (Figure S1). The 3D structure of GRF protein in the same clade is conserved, and its gene structure, conserved domain and expression pattern are consistent (Figure S2). Using model structure prediction analysis, we can deepen our understanding of the biological functions of GRF family members. We constructed a fusion expression vector of the LuGRF1 gene and transferred the gene into tobacco leaves, and found that the gene was expressed in the nucleus (Figure 5), which was consistent with the results reported in the literature [14]. Studies have shown that GRFs play a crucial role in organ development [39,40], including expression in different parts of the roots, stem apex meristem and flowers, especially in cell proliferation and differentiation [4,5,41]. According to RNA-seq data analysis, LuGRF expression is different in different tissues, but most LuGRF genes are highly expressed in embryos, during flower development and in fruit, and cell proliferation is vigorous (Figure 6C). Studies have shown that overexpression of ath-miR396 is characterized by small and narrow leaves and embryonic defects, and that it plays a role in flower organ development [42], and the overexpression of NTGRF-like genes regulates leaf and flower development in tobacco [43]. GRF genes are strongly expressed in the young leaves, flower buds and bud tips of rice, which affects plant growth and development by regulating cell proliferation [4]. The OsGRF1 gene not only regulates leaf shape but also flower formation, and OsGRF6 also plays an important role in the development of flower organs [44,45]. There are few reports on the correlation between GRF and fruit development, but some studies have found that when the expression of miRNA396a/b in transgenic tomatoes is down-regulated, the expression level of its target gene GRF is up-regulated, and correspondingly, the flowers, calyx and fruits of transgenic tomato plants become significantly larger [46]. It was further confirmed that LuGRF genes may play an important role in regulating flower organ development, but their function in fruits and embryos needs to be further verified. Plants have evolved a range of stress resistance mechanisms, in which transcription factors play a key regulatory role. GRF-like transcription factors play an important role in coordinating stress responses and defense signals during plant growth and development [45,47,48]. For example, under stress conditions, overexpression of Populus davidiana × P. bolleana PdbGRF1 enhanced tolerance to salt stress [49]. In strawberries, FvGRP4 and FvGRP9 are up-regulated under high temperature stress [50]. Transcriptome data showed that three LuGRF genes were up-regulated after salt treatment, and eight LuGRF genes were found to have increased expression after heat treatment (Figure 6B). The response of LuGRF genes to heat stress was relatively strong under the two abiotic stresses, and LuGRF genes may be involved in biological processes related to abiotic stress response. The response and function of LuGRF genes to environmental stress in flax need to be further verified. Cis-element analysis of the promoter region of LuGRF genes showed a large number of development-related elements, environmental-stress-related elements, hormone-responsive elements and light-responsive elements (Figure 4A), most of which are related to hormone response (Figure 4B,C), including abscisic acid and MeJA response elements. These results suggested that the expression level of LuGRF might be induced by ABA and MeJA to some extent. In this study, qRT-PCR was used to analyze the expression patterns of flax in different tissues and treatments (Figure 7). Four genes were significantly upregulated by ABA treatment and two genes were significantly upregulated by MeJA treatment (Figure 8). GRF transcription factor was first found to regulate plant growth via the gibberellin pathway, and exogenous GA treatment of rice could increase the transcription levels of OsGRF1, OsGRF2, OsGRF3, OsGRF7, OsGRF8 and OsGRF10 4–10 times over [4]. Six GRF genes were identified in the transcriptome of tea tree, and it was found that the expression level of three members was increased after ABA treatment, and the expression level of five members was decreased after MeJA treatment [51]. Our study found that LuGRF1, LuGRF7, LuGRF11 and LuGRF12 expression was induced by exogenous ABA, consistent with the role of LuGRF genes in abiotic stress tolerance [52]. Jasmonic acid plays a key regulatory role in plant growth and development and various physiological processes, including organ formation, the reproductive process, fruit maturation and senescence and resistance to biotic and abiotic stresses [53,54]. In our study, we found that the expression levels of 15 LuGRF genes were weakly affected by MeJA, and only the transcription levels of LuGRF1 and LuGRF11 increased significantly at 12 h and 24 h after treatment, suggesting that LuGRF1 and LuGRF11 may be involved in embryo development via the signaling pathway of MeJA. Moreover, putative cis-regulatory elements associated with hormone response, such as ABA and MeJA, were recognized in the promoter region of LuGRF genes. In plant species, hormones such as ABA and MeJA are more linked with stress cell signaling pathways [55,56]. In addition, several transcription factors and ion transporter genes are induced by ABA and MeJA signaling in response to environment stimuli [57,58]. Our results suggest that LuGRF genes might be directly induced by ABA and MeJA. However, there are few studies on GRF genes and MeJA hormone treatment, and the response to and function of LuGRF in flax hormone stress need to be further verified. 4. Materials and Methods 4.1. Plant Material The flax (Linum usitatissimum) variety Longya10 was selected as the focus of this study. The flax seeds were disinfected with 75% alcohol for 10 min, washed with sterile water, planted on soil and transferred to a greenhouse under 26/18 °C 16/8 h light. When flax seedlings grew to 6–7 cm tall, the treatment group was sprayed with ABA (80 mM), MeJA (80 mM) or distilled water. At 0, 4, 8, 16 and 24 h after spraying, the leaves were sampled, and this was repeated three times for each treatment group. All the samples were frozen with liquid nitrogen and stored in an ultra-low temperature refrigerator at −80 °C for RNA extraction. 4.2. Identification of LuGRF Gene Family in Flax The flax genome sequence was downloaded from NCBI (entry number QMEI02000000) and the other genome annotation files were obtained at https://figshare.com/articles/dataset/Annotation_files_for_Longya-10_genome/13614311 (accessed on 1 August 2023). We used two methods to identify the flax GRF genes. First, Arabidopsis GRF protein sequences were downloaded from the TAIR website (https://www.arabidopsis.org/, accessed on 15 August 2023) and these were used as queries in a BLASTP search of flax’s predicted proteins. We also obtained profile-hidden Markov models of the QLQ (PF08880) and WRC (PF08879) domains from the Pfam database (http://pfam.xfam.org/, accessed on 15 August 2023), and used them to search for the predicted flax proteins. Flax proteins that aligned with Arabidopsis GRF proteins, but that did not contain the QLQ and WRC domains, were discarded. The remaining proteins were defined as flax LuGRF proteins, resulting in 17 flax GRF genes. Using the ExPASy ProtParam tool (https://web.expasy.org/protparam/, accessed on 20 August 2023), analysis of the physical and chemical properties, including the coding length, number of amino acids, molecular weight (MW) and theoretical isoelectric point (pI), of the LuGRFs was calculated. Subcellular localization prediction was performed using the BUSCA website (http://www.busca.cn, accessed on 20 August 2023). Using the MBC website (http://cello.life.nctu.edu.tw, accessed on 20 August 2023), we also predicted the signal peptides and transmembrane domains. 4.3. Phylogenetic Analysis The Clustal W tool in MEGA (version 11) was used to compare the full-length amino acid sequences of the GRF proteins from Oryza sativa, Zea mays, Arabidopsis thaliana and Linum usitatissimum using the default parameters. Using the MEGA version 11 software, the neighbor joining algorithm and default settings (neighbor-Joining; Parameter: Bootstrap 1000) were used to construct a phylogenetic tree under the maximum likelihood (ML) principle. Then, we visualized the constructed tree using iTOL version 6 (https://itol.embl.de/, accessed on 2 September 2023). 4.4. Chromosome Localization, Conserved Domain and Conserved Motif of LuGRF Information on the location of LuGRF on the chromosomes was obtained from the flax genome FASTA file and the gff3 file. Conservative structure domain identification on the NCBI CD-search website (https://www.ncbi.nlm.nih.gov/Structure/BWRPSB/BWRPSB.Cgi, accessed on 2 September 2023) and the use of MEME (http://alternate.meme-suite.org/tools/meme, accessed on 2 September 2023) was involved in analyzing the conserved motifs of the LuGRF proteins, and we visualized them using TBtools version 2.026 [59]. 4.5. Cis-Acting Elements and miRNA Prediction The genomic sequence from 2000 bp upstream of each LuGRF gene was extracted using TBtools. Then, the online PlantCARE website (http://bioinformatics.psb.ugent.be/webtools/plantcare/html/, accessed on 5 September 2023) was used to predict the cis-regulatory elements in the upstream regions using TBtools for visualization of the final result. The miRNA targeting LuGRF was predicted using the psRNATarget website (https://www.zhaolab.org/psRNATarget/analysis?function=3, accessed on 5 September 2023) with the default parameters [60]. 4.6. Three-Dimensional Protein Structure Prediction and GO Enrichment Analysis First, the protein secondary structure of the LuGRF proteins was predicted using GOR IV (https://npsa-prabi.ibcp.fr/cgi-bin/npsa_automat.pl?page=/NPSA/npsa_gor4.html, accessed on 8 September 2023). Then, the 3D structure of the protein was predicted using the SWISS-MODEL online tool (https://swissmodel.expasy.org/, accessed on 7 September 2023). First, we downloaded the go-base.obo file in TBtools. Then, we input the protein information of the entire flax genome into the online website eggNOG-mapping (http://eggnog-mapper.embl.de/, accessed on 7 September 2023) to obtain the annotation files. Finally, the GO Enrichment function in TBtools was used for visualization. 4.7. Subcellular Localization RNA was extracted from young flax leaves and reverse-transcribed into cDNA and used as a PCR template to clone the full-length coding region of LuGRF1. The primers were designed (Table S1) using Primer 5 to allow ligation to the pGM-T vector and transformation into competent cells of E. coli. The resulting pGM-T-GRF1 was digested using XhoI and SalI enzymes and subcloned into the same sites in pGD-RFP. After the LuGRF1 fragment was ligated into pGD-RFP, it was transferred into E. coli, the recombinant plasmid pGD-GRF1-RFP was extracted, and the localization vector was successfully constructed. The pGD-RFP and pGD-GRF1-RFP plasmids were transferred into Agrobacterium tumefaciens GAH105 receptor cells; then, the two bacterial liquids were expanded and the bacterial weight was suspended in the infection buffer, incubated at 28 °C for 3 h, injected into tobacco leaves with a syringe, and the location was observed under confocal microscopy after 3 days of incubation in the dark. 4.8. Analysis of RNA-Seq Data and Expression Patterns of LuGRF Four flax RNA-seq data sets were used in this study: (i) pistils, stamens, fruits and shoots (NCBI SRA PRJNA1002756) (https://www.ncbi.nlm.nih.gov/sra/?term=, accessed on 8 September 2023); (ii) torpedo_embryo, root, ovary, mature_embryo, heart_embryo, globular_embryo, cotylden_embryo, anther, seeds (PRJNA663265); (iii) roots and leaves after salt stress (PRJNA977728) [61]; (iv) after thermal stress (PRJNA874329). Data were processed using the fastp [62] filter connector with hisat2 [63] to map to the Longya10 reference genome, using the tidyverse [64], Rsubread [65], limma [66] and edgeR [67] R packages for further quantification. Finally, TBtools was used to draw a heat map of the log2 values of FPKM. 4.9. RNA Extraction, and qRT-PCR The RNA was extracted using an RNA extraction kit (BIOMGA, San Diego, CA, USA), and after NanoDrop-2000 concentration detection, the RNA was reverse-transcribed into cDNA. qRT-PCR was performed using the TB GreenTM Premix ExTaqTM II (TaKaRa Bio, Kyoto, Japan) fluorescence quantitative kit. The PCR reaction system was 20 μL: 2× mix 10 μL; upstream and downstream primers (Table S1) were 1 μL each; cDNA template 2 μL; RNase free water 6 μL. The qRT-PCR procedure was performed at 50 °C for 2 min; 95 °C for 10 min; 95 °C 15 s; 60 °C 15 s; 72 °C 15 s; 40 cycles. Each sample was repeated 3 times, GAPDH was selected as the reference gene and the relative gene expression was calculated using the 2−ΔΔCt method. 5. Conclusions This study provides a comprehensive and systematic analysis of the flax GRF transcription factor family for the first time. A total of 17 members of the GRF transcription factor family have been widely identified in the flax genome. The phylogenetic relationships, gene structure, conserved motifs and collinearity were analyzed using bioinformatics analysis methods. The three-dimensional structure prediction of the protein revealed that LuGRF has a similar structure and may have similar functions. MicroRNA prediction found that lus-miR396 is the main miRNA target of the LuGRF gene family. Most LuGRF gene promoters contain cis-regulatory elements responding to hormones and stress. Based on the expression profiles and qRT-PCR, most LuGRF genes were associated with development (flax fruit and embryo, etc.), hormones (MeJA, ABA, etc.) and abiotic stresses (salt, heat, etc.). We also verified the expression of LuGRF1 genes in the nucleus using subcellular mapping. These analysis results help us understand the role of flax GRF genes in development and environmental stress conditions, and provide a basis for studying the molecular mechanisms of flax GRF transcription factors.