Paracetamol-Mediated Synthesis of Silver Nanoparticles and Their Functionalization with Ionic Liquid for the Colorimetric Biosensing of Ascorbic Acid Authors: Umar Nishan, Irfan Ullah, Rukhsana Gul, Amir Badshah, Nawshad Muhammad, Naeem Khan, Mohibullah Shah, Muhammad Asad, Saifullah Afridi, Riaz Ullah, Essam A. Ali, Suvash Chandra Ojha Published: 2023 ABSTRACT Ascorbic acid is a vital biomolecule for human beings. When the body’s level of ascorbic acid is abnormal, it can lead to a number of illnesses. Its appropriate concentration is necessary for the oxidation of prostaglandins and cyclic adenosine monophosphate, the production of dopamine, norepinephrine, epinephrine, and carnitine, and the expansion and durability of the collagen triple helix in humans. In the present work, silver nanoparticle synthesis was performed through a paracetamol-mediated approach. Different characterization techniques, such as X-ray diffractometry (XRD), energy dispersive X-ray (EDX), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM), were used to confirm the prepared nanoparticles. Subsequently, the prepared Ag NPs functionalized with an ionic liquid were used as a sensing platform for ascorbic acid in blood serum samples. To achieve the best possible results, the proposed biosensor was optimized with different parameters such as TMB concentration, time, amount of capped nanoparticles (NPs), and pH. The proposed biosensor offers a sensitive and straightforward method for ascorbic acid with a linear range from 2 × 10–9 to 3.22 × 10–7 M, an LOD of 1.3 × 10–8 M, an LOQ of 4.3 × 10–8 M, and an R2 of 0.9996, Moreover, applications of the proposed biosensor were successfully used for the detection of ascorbic acid in samples of human plasma, suggesting that Ag NPs with high peroxidase-like activity, high stability, and facile synthesis exhibited promising applications in biomedical fields. Introduction The common water–soluble antioxidant ascorbic acid, generally known as vitamin C, is found in a variety of foods and beverages. In the food industry, it is added artificially to food sources as an antioxidant. Ascorbic acid is also essential for human survival.1 Many human metabolism processes, such as cell differentiation, intestinal cells, iron uptake in humans, and immune functioning, depend on ascorbic acid.2 Scurvy will arise from a deficiency of ascorbic acid, and urinary stones, diarrhea, and stomach convulsions are due to the abundance of ascorbic acid.3,4 Rapid, sensitive, and selective detection of ascorbic acid levels is significant for medical testing and diagnosis. For the determination of ascorbic acid, various methods have been reported, such as electrochemistry,5 chromatography,6 capillary electrophoresis,7 and fluorescence spectroscopy.8 Although these conventional approaches typically have good selectivity and a low detection limit, they frequently have some drawbacks, including costly, bulky equipment, and lengthy processes. The colorimetric approach has advantages including high sensitivity, quick analysis, and strong reproducibility due to its ease of use, speed, low cost, and ability to be easily detected with the naked eye. It has drawn a lot of attention and has attracted a lot of interest recently. A wide range of applications, including environmental remediation, biosensors, biomedical devices, renewable energy, medicine, and cosmetics, have been developed due to the unique properties of nanoparticles. In comparison to their macroscale counterparts, due to their excellent chemical, biological, and physical properties, Ag nanoparticles (NPs) have attracted growing interest among these materials.9 Nanomaterials have gained increasing interest over the past 10 years because of their distinctive, new characteristics and medicinal applications.10 Due to their remarkable advantages, the use of colorimetric nanoprobes has significantly grown in recent years. Metal nanoparticles (NPs), primarily Au and Ag nanoparticles, exhibit extremely large molar extinction coefficients, sensitive colorimetric sensing due to their shape, distance-dependent optical characteristics, and unique size.11 Some new and effective fluorescent nanoprobes were developed based on their unique reaction between the nanomaterials and ascorbic acid. A potential method was developed for the determination of ascorbic acid.12 For instance, Yan’s et al. developed a CdTe QD fluorescence probe for the determination of ascorbic acid after quenching with a certain amount of KMnO4.1313 Similarly, cobalt oxyhydroxide (CoOOH)-modified persistent luminescence nanoparticles (Sr2MgSi2O7:1% Eu, 2% Dy) designed in living cells and in vivo based on the specific reaction of CoOOH have been developed by Tang’s et al. for the detection of ascorbic acid.14 For in vivo sensing of ascorbic acid in rat brain, Mao’s group developed a new fluorescent technique while examining the mechanism of single-layer MnO2 nanosheets inhibiting luminous 7-hydroxycoumarin.15 Gold or silver nanoparticles (Au or Ag NPs) are ideal chromogenic agents for the design of colorimetric sensors due to their distinctive size, structure,16 and distance-dependent localized surface plasmon resonance (LSPR) properties.17 Agglomeration of nanoparticles is one of its features that has to be overcome, as it results in the loss of the available surface area for the reaction.18 Ionic liquids that are conductive and have functional moieties in their structure can interact with the Ag NPs. They can interact through several intermolecular interactions, such as hydrogen bonding, steric, solvophobic, electrostatic, and van der Waals. All such types of interactions are proven to improve the sensing and catalytic properties of the sensing system.19 1-H-3-methylimidazolium acetate is a protic ionic liquid that has aromaticity in both the imidazolium cation and carboxylate anion. It helps in providing a more electron-rich conductive environment that eases reaction, while other nonaromatic protic ionic liquids do not have such resonance properties. Likewise, protic ionic liquids are preferred to aprotic ionic liquids, as the proton of such protic ionic liquids is suggested to play an important role in H2O2 degradation and subsequent detection.20 In this study, Ag NPs were prepared by using low-cost, docile, and ubiquitous paracetamol as a reductant. Moreover, the paracetamol-mediated Ag NPs were functionalized with 1-H-3-methylimidazolium acetate ionic liquid for excellent deagglomeration. The fabricated platform (paracetamol-mediated Ag NPs functionalized with IL) was used for the first time for colorimetric detection of ascorbic acid. By using H2O2, the chromogenic substrate, i.e., 3,3′,5,5′-tetramethylbenzidine (TMB), has been oxidized in the presence of IL/Ag NPs to develop a sensitive, selective, simple, and quick approach for the detection of the analyte. To achieve the best results of the proposed sensor, various reaction conditions, such as (a) pH, TMB concentration, time, and number of capped NPs, were optimized. The proposed biosensor sensitivity and selectivity were also investigated by using the aforesaid optimum conditions. Experimental Section Materials and Reagents From Sigma-Aldrich, we purchased hydrochloric acid (HCl), 3,3′,5,5′-tetramethylbenzidine (TMB), silver nitrate (AgNO3), hydrogen peroxide (H2O2), and sodium hydroxide (NaOH). BioWorld provided PBS at a range of pH levels. Paracetamol tablets (500 mg) were purchased from a local market. All of these substances were found in their purest forms and were used without further purification. The tests were conducted using premium glassware, and the solutions were prepared by using deionized water. Instrumentation To identify the characteristic peaks of Ag NPs, Fourier transform infrared spectroscopy (FTIR, Nicolet 6700) was used. Scanning electron microscopy (SEM), INCAx-act Oxford Instruments’ TESCAN VEGA (LMU), was used to confirm the morphology of the prepared Ag NPs. The phase identification of the synthesized Ag NPs was carried out using X-ray diffraction (JCPDS, file No. 04-0783). The absorbance spectrum of the colloidal sample was obtained in the range of 200–800 nm with distilled water as a reference. Shimadzu’s UV–vis spectrophotometer, model 1800, from Japan, was utilized to record the sample’s absorption spectra. Synthesis of Drug-Mediated Ag NPs Two paracetamol tablets (500 mg) were ground into a fine powder and poured into 50 mL of double-distilled water to dissolve. At room temperature, the suspension was agitated for 10 min at a speed of 1000 rpm, and after stirring, the solution was filtered. A 50 mM solution of AgNO3 was prepared and added dropwise to the obtained filtrate while being kept at 1000 rpm on a magnetic stirrer for 6 h at an ambient temperature. The solution changed from colorless to brown as it was mixed. In order to obtain Ag NPs in powder form, the solution containing Ag NPs was stirred and centrifuged for 25 min. The Ag NPs were maintained at room temperature after being dried at 50 °C for further use in characterization and sensing. Characterization For the confirmation of prepared nanoparticles, different characterization techniques were used such as scanning electron microscopy (SEM), X-ray diffraction (XRD), UV–vis spectroscopy, energy-dispersive X-ray analysis (EDX), and Fourier transform infrared spectroscopy (FTIR). Synthesis of Ionic Liquid 1-H-3-methylimidazolium acetate ionic liquid was synthesized using the modified approach that was previously published by our group.21−23 Capping of Drug-Mediated Ag NPs with Ionic Liquid The prepared 1-H-3-methylimidazolium acetate ionic liquid (IL) was capped with synthesized Ag NPs. One mL of the ionic liquid was mixed with Ag NPs (6 mg). The mixture was thoroughly crushed for 30 min using a pestle and mortar. The functionalized Ag NPs were stored for further analysis. Colorimetric Detection of Ascorbic Acid Ag NPs were evaluated for their peroxidase-like activity by using colorimetric detection. The 3,3′,5,5′-tetramethylbenzidine (TMB) dye was expected to be oxidized by H2O2, and the product’s color will change from colorless to blue-green. The reaction occurred under the following conditions: 40 μL of IL/Ag NPs 4 mM TMB solution (180 μL) and 500 μL of acetate buffer solution, followed by the addition of 9 mM H2O2 solution (200 μL). Then, 90 μL of ascorbic acid (3.22 × 10–7 M) was added to the reaction solution, and the mixture was then incubated. Both the UV–vis spectrophotometer and the naked eye confirmed the expected colorimetric change (Scheme 1). Mechanism for the Determination of Ascorbic Acid Results and Discussion Characterization of Silver Nanostructures UV–Visible Absorption Studies The synthesis of Ag NPs was investigated using UV–vis spectrum analysis. The color change was observed with the combination of paracetamol tablets and silver nitrate solution. During the reduction process, visual observation of the reaction solution’s color changing from colorless to brown confirms the synthesis of drug-mediated Ag NPs. For 1 week, the absorbance of the solution was investigated. According to the spectrum analysis, the Ag NP peak was observed at 417 nm, as shown in Figure 1, and it remained stable for a few days. After that, no absorption increase was observed.24 UV–vis absorption spectrum of the paracetamol-mediated Ag NPs showing the characteristic surface plasmon resonance and peak at around 417 nm. FTIR Analysis The FTIR spectra of the synthesized nanoparticles are shown in Figure 2. FTIR characterization of the drug-mediated nanoparticles was carried out in the region of 4000–500 cm–1. The characteristic peak at around 2910 cm–1 was assigned to CH3 in the acetyl group of the paracetamol. The absorption bands at around 3240 and 3370 cm–1 are assigned to the NH and OH bonds of the drug-mediated Ag NPs. The peak at around 1690 cm–1 was allocated to C=O, and the band at 596 cm–1 was assigned to the presence of Ag–O, confirming the formation of Ag NPs in the presence of a capping agent.25,26 FTIR spectrum of the drug-mediated Ag NPs shows the presence of Ag–O, confirming the formation of Ag NPs in the presence of a capping agent. XRD Analysis Various Bragg reflections of the synthesized Ag NPs were confirmed by XRD analysis, which can be found at 2θ (°) values of 33.1, 38.12, 44.3, and 46.39°, which relate to the planes of pure Ag 111, 122, 220, 231, and 241 dependent on the face-centered cubic structure (JCPDS, file No. 04-0783), as illustrated in Figure 3. The synthesized Ag NPs were crystalline in nature, which was confirmed by X-ray diffraction.27 The prepared face-centered cubic Ag NPs’ average crystal size was calculated to be 42 nm. The average crystalline size of the prepared Ag NPs was calculated by using the Scherrer equation (D = Kλ/β cos θ). XRD analysis of the prepared face-centered cubic Ag NPs with an average crystalline size of 42 nm. SEM Analysis To examine the morphology of silver nanoparticles, scanning electron microscopy (SEM) was used, as shown in Figure 4. The prepared nanoparticles have a strong tendency toward agglomeration, have round-shaped structures, and are crystalline in nature. The SEM pictures reveal that the produced nanoparticles feature granular aggregates, cluster structures, and a high tendency toward agglomeration. In addition to the particles, there was a material that might be connected to the precursors.28,29 SEM image of the synthesized Ag NPs shows that the prepared nanoparticles have a strong agglomeration tendency. EDX Analysis Figure 5 and Table 1 show the presence of Ag particles as well as the primary components of C and O, which come from the drug coating. For the synthesis of nanoparticles, AgNO3 salt was used. Certain impurities of Si and Cl were also found that may be due to the SEM sample tape and chemicals. EDX spectrum of the synthesized Ag NPs shows a strong Ag peak. Table 1EDX Analysis by Weight of the Synthesized Ag NPselementweight %atomic %C12.0936.78O15.8836.28Si1.471.91Cl1.611.66Ag68.9623.37total100.00100.00 EDX Analysis by Weight of the Synthesized Ag NPs Colorimetric Detection of Ascorbic Acid For the detection of ascorbic acid, a simple and selective colorimetric approach based on Ag NPs was developed. Figure 6 illustrates the optical sensing and UV–vis absorption spectra of ascorbic acid. Ascorbic acid decreases the blue–green byproducts when it is added to oxidize TMB. Additionally, the formation of OH radicals from the adsorption of hydrogen peroxide on the surface of NPs is linked to the oxidation of TMB to generate blue–green compounds. When ascorbic acid was added to the reaction mixture, the blue–green product was further decreased to colorless within 2 min. The solution was initially blue–green, but after the addition of ascorbic acid, it turned colorless, which can be observed with the naked eye. The colorimetric change can also be observed by the UV–vis spectrum, as can be seen in Figure 6. Previously, Liu et al. used Pt/CeO2 nanocomposites for the colorimetric detection of ascorbic acid.30 Colorimetric detection of ascorbic acid conditions: 40 μL of capped Ag NPs, μL of TMB sol (4 mM), 500 μL of PBS (0.2 mM), 200 μL of H2O2 (9 mM), and 90 μL of ascorbic acid (3.22 × 10–7 M). Mechanism for the Detection of Ascorbic Acid In the proposed mechanism, TMB is oxidized by hydrogen peroxide mediated by IL-functionalized Ag NPs. This results in the formation of a blue-green product, which confirms the oxidation of TMB. The addition of ascorbic acid to the reaction mixture results in the reduction of oxidized TMB (colorless), where the ascorbic acid acts as a reducing agent and converts to dehydroascorbic acid. Chen et al. also reported a peroxidase mimic platform of Pt-loaded hollow mesoporous carbon nanospheres for the colorimetric detection of ascorbic acid.31 Optimization of Different Parameters Optimization of Capped Ag NPs The optimization of the capped Ag NPs was performed, and the results are shown in Figure 7. In an Eppendorf tube, different amounts of IL-coated NPs were added: 200 μL of H2O2, 500 μL of phosphate-buffer saline solution, 4 mM of TMB solution (180 μL), and 90 μL of an ascorbic acid solution with a concentration of 3.22 × 10–7 M. To observe the colorimetric shift, the reaction was allowed to run for 2 min. 90 μL of ascorbic acid and 40 μL of ionic liquid-capped silver nanoparticles are synergistic. In other words, the color entirely shifts from green to translucent at a 40 μL capped Ag NP quantity. So, 40 μL of capped Ag NPs were selected as the optimum concentration for further analysis.32−34 Effect of capped Ag NPs [conditions: 180 μL of TMB sol (4 mM), 500 μL of PBS (6 mM), 70 μL of H2O2 (9 mM), and 90 μL of ascorbic acid (3.22 × 10–7 M)]. pH Optimization Figure 8 shows the optimal pH for the suggested reaction. To efficiently manage the suggested sensor’s response, different pH values within the range of 3–11 were used. NaOH and HCl solutions were originally used in order to optimize the pH properly. The following optimal circumstances led to the best colorimetric shift for the suggested sensor: 40 μL of IL/Ag NPs, 200 μL of H2O2, incubation time 2 min, 180 μL of TMB solution (4 mM), and 90 μL of ascorbic acid solution (3.22 × 10–7 M). Therefore, for further experiments, pH 7 was selected as the optimum pH. Therefore, pH 7 that was measured is the optimal pH for the recommended probe. In the previously reported work, 6.59 was suggested as the ideal pH for the recommended biosensor.35 pH optimization of the proposed biosensor [conditions: 40 μL of capped Ag NPs, 180 μL of TMB sol (4 mM), 200 μL of H2O2 (9 mM), and 90 μL of ascorbic acid (3.22 × 10–7 M)]. TMB Optimization To accomplish the best colorimetric change, the TMB concentration was also optimized. TMB solutions at a range of concentrations, from 1 to 7 mM, were prepared. When ascorbic acid was added, the reaction mixture became colorless, and the sensor gave the best response with a 4 mM TMB solution. Figure 9 shows that the colorimetric response did not perform well at lower or higher concentrations of TMB than 4 mM. So, the optimum concentration of TMB for further experiments was determined to be 4 mM.36 Optimization of the TMB solution [conditions: 40 μL of capped Ag NPs, 500 μL of PBS (6 mM), 200 μL of H2O2 (9 mM), and 90 μL of ascorbic acid (3.22 × 10–7 M)]. Time Optimization Time intervals ranging from 20 to 140 s were observed on the sensors. After 120 s of incubation, excellent colorimetric changes were detected, as shown in Figure 10. At that point, all of the capped Ag NPs were used in the reaction. As a result, for further experiments, 120 s was selected as the optimum time because no further colorimetric change was observed after 120 s. Time optimization [conditions: 40 μL of capped Ag NPs, 180 μL of TMB sol (4 mM), 500 μL of PBS (6 mM), 200 μL of H2O2 (9 mM), and 90 μL of ascorbic acid (3.22 × 10–7 M)]. Analytical Characteristics of the Proposed Biosensor Under ideal experimental conditions, a simple colorimetric assay was used directly with the Ag NPs to detect various ascorbic acid concentrations. A sensitive and effective colorimetric method based on the relationship between the ascorbic acid concentration and absorbance intensity at 652 nm was used for the determination of ascorbic acid. The developed sensor’s ascorbic acid detection sensitivity was evaluated by using a range of ascorbic acid concentrations. The response of colorimetric biosensors to varying ascorbic acid concentrations is shown in Figure 11A,B. At lower concentrations of ascorbic acid, the sensor response was low, and the peak absorbance was high, but as the ascorbic acid concentration increased, they linearly decreased. This method was able to detect ascorbic acid with a linear range of 2 × 10–9–3.22 × 10–7 M and an R2 value of 0.9996. It was found that both the LOQ and LOD were 1.30 × 10–8 and 4.3 × 10–8 M, respectively. The proposed colorimetric method had the advantages of a low limit of detection, direct eye observation, and low cost when compared to other previously reported detection methods. Table 2 compares this work with previously reported colorimetric methods on the basis of linear range and limit of detection for the colorimetric determination of ascorbic acid. Panel (A) shows different concentrations of ascorbic acid, and panel (B) shows the corresponding calibration curve. Table 2Comparison of Some of the Colorimetric Sensors with the Proposed Biosensor for Detection of Ascorbic AcidS. nomaterials usedmethod appliedlinear range (μM)LOD (μM)references1Pt/CeO2 nanocompositescolorimetric0.5–300.08(30)2Papain-Ag NPscolorimetric0.25–500.079(37)3smartphone-based CD-spectrometercolorimetric0.6250–400.4946 (38)4silica-coated Au nanorodscolorimetric0.1–2.50.049(39)5graphene quantum dotscolorimetric0.3–100.094(40)6CQDscolorimetric1.0–1050.14(41)7Cu–Ag/rGOcolorimetric5–303.8(42)8Mn-CDscolorimetric0.05–2.50.009(43)9M-CQDscolorimetric10–703.26(44)10IL-capped Ag NPscolorimetric0.002–3.220.013this work Comparison of Some of the Colorimetric Sensors with the Proposed Biosensor for Detection of Ascorbic Acid Interference Studies In order to evaluate the selective detection of ascorbic acid employing IL-loaded Ag NPs, the absorbance sensitivity of the proposed biosensor was examined with regularly coexisting samples such as ethanol, urea, methanol, K+, dopamine, and uric acid, as shown in Figure 12. The results of Figure 12 show that ascorbic acid has a very low absorption value. Ethanol, urea, methanol, K+, dopamine, and uric acid have substantially high absorption values. However, the absorbance spectra decrease only at 652 nm when the quantity of ascorbic acid is increased; there are noticeable changes in absorbance when coexisting compounds are added. The same experimental conditions and analyte concentration (3.22 × 10–5 M) were used for all of the experiments. As a result, the suggested sensor also showed great selectivity for the detection of ascorbic acid compared to concurrent interfering species. When compared to the existing literature, the reported approach for the detection of hydrogen peroxide has a higher selectivity. The impact of several interfering ions and chemicals, including glucose, dopamine, uric acid, and citric acid, as well as ions, was studied. Up to a concentration of 1 mM, it was found that the aforementioned ions and compounds had no discernible impact on the detection of ascorbic acid. Interaction between ascorbic acid and other analytes at concentrations of (3.2 × 10–5 M). Real-Sample Analysis The fabricated sensor is intended to verify the ascorbic acid measurement in a real specimen. In a blood serum sample from a scurvy patient, ascorbic acid is found under ideal experimental conditions. Ascorbic acid solutions with various concentrations, including 0.295 × 10–7, 0.692 × 10–7, and 1.37 × 10–6 M, were spiked into a blood serum sample solution from a scurvy patient that was received from a pharmacy, according to Figure 13. The calibration plot, which was previously created using multiple ascorbic acid concentrations collected under the same ideal conditions at 652 nm, is used to determine the actual ascorbic acid content in the serum total sample solution. The percentage recovery algorithm is used, and Table 3 provides a summary of the results By the addition of different concentrations of ascorbic acid in the UV–vis spectra of the real samples of blood serum at optimized conditions (0.295 × 10–7, 0.692 × 10–7, and 1.37 × 10–6 M). Table 3Real-Sample Analysis of Blood Serumsampledetectedascorbic acid added (μM)ascorbic acid found (μM)recovery (%)RSD (%)10.0050.2950.3101.690.83820.0080.6820.7101.151.00930.031.371.4102.180.459 Real-Sample Analysis of Blood Serum Conclusions In this research, an ionic liquid-capped silver nanoparticle-based biosensor was fabricated for the detection of ascorbic acid. The silver nanoparticles were synthesized with the help of a paracetamol reductant, which is cost-effective, ubiquitously available, and easily handled. The proposed biosensor offers a sensitive and selective method for the determination of ascorbic acid with a linear range from 2 × 10–9 to 3.22 × 10–7 M, a low detection limit of 1.3 × 10–8 M, and a low quantification limit of 4.3 × 10–8 M. Comprehensive studies were carried out to achieve the best results for the proposed sensor. Different parameters, such as the TMB concentration, time, amount of capped NPs, and pH, were optimized. In addition, the proposed biosensor was successfully used for the detection of ascorbic acid in samples of human plasma. The proposed sensor has the potential to be used for commercial use.