Use of cDNA Tiling Arrays for Identifying Protein Interactions Selected by In Vitro Display Technologies Authors: Kenichi Horisawa, Nobuhide Doi, Hiroshi Yanagawa Published: 2008, PLOS ONE DOI: 10.1371/journal.pone.0001646 ABSTRACT In vitro display technologies such as mRNA display are powerful screening tools for protein interaction analysis, but the final cloning and sequencing processes represent a bottleneck, resulting in many false negatives. Here we describe an application of tiling array technology to identify specifically binding proteins selected with the in vitro virus (IVV) mRNA display technology. We constructed transcription-factor tiling (TFT) arrays containing ∼1,600 open reading frame sequences of known and predicted mouse transcription-regulatory factors (334,372 oligonucleotides, 50-mer in length) to analyze cDNA fragments from mRNA-display screening for Jun-associated proteins. The use of the TFT arrays greatly increased the coverage of known Jun-interactors to 28% (from 14% with the cloning and sequencing approach), without reducing the accuracy (∼75%). This method could detect even targets with extremely low expression levels (less than a single mRNA copy per cell in whole brain tissue). This highly sensitive and reliable method should be useful for high-throughput protein interaction analysis on a genome-wide scale. INTRODUCTION Protein display technologies [1] , such as phage display [2] , ribosome display [3] – [5] , DNA display [6] and mRNA display [7] – [9] , are powerful tools for construction and in vitro selection of large libraries of genotype-phenotype conjugates. These libraries can be affinity-screened via the protein moiety (phenotype) followed by decoding of the nucleic acid moiety (genotype) to identify the selected proteins. These display technologies have been employed not only for directed evolution of novel proteins and antibodies [10] – [12] , but also for the screening of protein-protein [13] , [14] , protein-drug [15] , and protein-DNA [16] interactions from randomly fragmented cDNA libraries. Development of totally in vitro display techniques, such as ribosome display [3] – [5] and mRNA display [7] – [9] , based on cell-free translation systems has extended the scope of previous techniques for protein interaction analysis using living cells, such as the yeast two-hybrid method [17] and biochemical methods coupled with mass spectrometry [18] , because the variety of testable interaction conditions is greater, and the in vitro techniques are applicable to cytotoxic proteins. However, the display technologies have a common bottleneck in the final step of identifying the specifically selected protein sequences. The decoding is usually achieved by cloning and DNA sequencing, but the following difficulties arise: 1) Only a limited number of clones can be analyzed, and thus positive candidates whose contents in the selected library are less than a threshold determined by the number of analyzed clones are lost as false negatives. 2) Positive sequences with low contents in a library can be enriched by iterative rounds of affinity-selection, but lower-affinity binders compete with higher-affinity binders and therefore drop out of the screening. 3) DNA fragments which are injurious to cloning hosts, e.g. , cytotoxic sequences, may be lost. 4) Cloning and sequencing of a huge number of copies of selected sequences is redundant, cost-ineffective, and time-consuming. Although novel high-throughput DNA sequencing methods that require no bacterial cloning process have recently been reported [19] , these techniques are not yet widely available. To overcome the above limitations, we examined the use of a DNA microarray technique as an alternative to the cloning and sequencing processes ( Figure 1 ). The combinatorial use of a tiling array [20] representing ORF sequences with in vitro display technology would provide a completely in vitro platform for highly sensitive and parallel analysis of protein interactions. It should be possible to detect enrichment of cDNA fragments of selected candidates even with low contents or low affinity. In this report, we demonstrate a highly sensitive analysis employing a transcription-factor tiling (TFT) array for identifying Jun-associated proteins selected with an mRNA display technology, in vitro virus (IVV) [21] , [22] , and show that the use of tiling arrays is indeed superior to the use of cloning and sequencing for decoding genetic information of proteins enriched by in vitro selection. A cDNA library was transcribed to an mRNA library, and then ligated with PEG Puro spacer [p(dCp)2-T(Fluor)p-PEGp-(dCp)2-puromycin] using T4 RNA ligase to prepare an IVV library. In this study, bait protein fused with tandem affinity purification (TAP) tag was co-translated with the IVV library in a wheat germ extract cell-free translation system. Complexes of bait protein and target IVV molecules were captured with affinity beads (IgG agarose) via the added TAP-tag. The RNA portion of the captured IVVs was reverse-transcribed and PCR-amplified. Finally, screened cDNA libraries were labeled and hybridized with tiling arrays as an alternative to cloning and sequencing (conventional IVV method). METHODS Preparation of bait template and IVV template libraries, and the procedure of IVV screening were described in detail in our previous report [21] . Details are also given in Methods S1 online. DESIGN AND CONSTRUCTION OF THE TFT ARRAY Oligonucleotide arrays were constructed photolithographically by an oligo DNA microarray construction service (NimbleGen). The sequences of 1,562 mouse transcription regulatory factors listed by Gunji et al. [23] , as well as 37 Jun-associated protein candidates found in our previous studies [14] , [21] , [22] , were collected from the RefSeq ( http://www.ncbi.nlm.nih.gov/RefSeq/ ) and Genbank ( http://www.ncbi.nlm.nih.gov/entrez/query.fcgidbNucleotide ) databases. Both strands of the total of 1,599 mRNA sequences were doubly represented by a total of 334,372 oligo DNA probes 50-mer in length, with no gap between the probes ( Figure 1 ). SAMPLE LABELING, HYBRIDIZATION AND SIGNAL DETECTION Biotin-labeling of the samples was performed by means of in vitro transcription from an SP6 promoter at the 5′-end of each cDNA fragment in the libraries, as described [24] , with some modifications. In this process, biotin-labeled sense-strand RNA fragments were produced. Thus, only the antisense-strand probe set was further analyzed in this study. The labeled samples from the bait (+) and bait (−) screening were hybridized separately on the tiling arrays. The hybridized tiling arrays were stained with Cy3-Streptavidin (Amersham) and detection was done with a scanner. Details are given in Methods S1 online. DATA ANALYSIS Collected data from the tiling array were normalized with the median correction algorithm. Ratios of signal values between the two samples from bait (+) and bait (−) screenings were calculated ( Data S1 online). The ratio data were expressed as log 2 X (X is the actual measurement). After signal measurement, specific signal peaks were identified by the “Windowed Threshold Detection” algorithm in SignalMap software (NimbleGen). This algorithm looks for at least four data points that are above a threshold value within a window. These points were grouped together and presented as a peak. We used the following parameters in the algorithm: Peak Window Size, 300 bp; Percent of Peak Threshold, 20% of maximum data in each mRNA sequence. The value of each peak was the maximum value of the data points in that peak. Only reproducible peaks in the duplicated data were collected as candidates for Jun interactors ( Table S1 online). A probe set for NM_183316 was not analyzed, because the sequence of NM_183316 overlapped with that of NM_025925 on the array. REAL-TIME PCR ANALYSIS Real-time PCR was performed with SYBR Premix Ex Taq (Takara) and protein-specific primer sets ( Table S2 online) on the LightCycler (Roche) as previously described [22] . The standard template DNA for the quantitative analysis was PCR-amplified from each selected sequence. IN VITRO PULL-DOWN ASSAY Pull-down assay using the C-terminal fluorescence labeling technique was performed as previously described [21] , with some modifications. The bait Jun and prey proteins were translated in vitro separately. Only the preys were fluorescence-labeled in in vitro translation. The bait and preys were incubated with affinity beads, and captured prey proteins were electrophoresed and analyzed by using a Molecular Imager FX (Bio-Rad). Details are given in Methods S1 online. SURFACE PLASMON RESONANCE ANALYSIS SPR analysis was performed on a BIACORE3000 instrument with a CM4 sensor chip conjugating anti-GST mAb (Biacore). GST-fused candidate proteins were employed as ligands. Full-length mouse Jun fused with a His-tag was employed as an analyte. The experiments were performed under two conditions of analyte concentration (500 nM and 250 nM). Details are given in Methods S1 online. RESULTS In affinity selection of protein interactions from randomly fragmented cDNA libraries, relatively short cDNA fragments encoding specific binding regions are often obtained. In order to detect these fragments, we adopted a tiling array strategy for the design of custom oligo DNA microarrays as follows: 1) Oligonucleotide probes of 50-mer in length were used. This is the preferred length for microarray probes, because shorter probes result in low sensitivity and longer probes produce non-specific signals [25] . 2) There should be no gaps between the probes. A contiguous linear series of data is required to recognize a signal peak in the algorithm for tiling array analysis (in this case, at least 4 data points are needed in a search window), so the probes must be densely arranged. 3) mRNA sequences were employed for the tiling array. Only coding regions are required for the purpose of protein-interaction analysis, so other genomic sequences, e.g. , introns, control regions and non-coding RNAs, were not employed. In this study, we constructed TFT arrays containing ∼1,600 ORF sequences of known and predicted mouse transcription-regulatory factors (334,372 oligonucleotides) to analyze cDNA fragments from IVV screening for Jun (a transcription factor)-interactors [21] . We also improved the method for labeling of cDNA samples. Usually, double-stranded DNA samples for a tiling array analysis are labeled by using random primers [26] . However, cDNA fragments selected from a randomly fragmented cDNA library [21] seem to be too short for efficient labeling by random priming. Indeed, in a test analysis with a TFT array using the random priming labeling method, we failed to detect all of the previously detected candidates (data not shown). Therefore we employed another labeling procedure [24] , in which sense-strand labeled RNAs were produced by one-step in vitro transcription using a SP6 promoter attached to cDNA fragments from IVV screening. IDENTIFICATION OF SELECTED CANDIDATES USING THE TFT ARRAY From the 5th-round DNA library of the IVV screening in the presence and absence of a bait Jun protein, called bait (+) and bait (−) screening, respectively [21] , we obtained labeled RNAs and hybridized them onto the tiling array. First, the ratios of the signal intensities from the experiments in the presence and absence of bait were calculated. The ratio data are presented in Data S1 online as a GFF formatted file. Next, we searched for signal peaks in the data, as described in Methods . Only reproducible signal peaks were collected ( Table S1 online); the total number of peaks was 647 on 545 mRNA sequences (some of the mRNA sequences included multiple peaks). To distinguish between true positives and false positives, specific enrichment of the selected candidates was validated by real-time PCR. Among the top 10 percent of the peaks (64 regions), specific enrichment of 35 peaks was confirmed in the screening (white graph in Figure 2A ; the signal intensity and peak data of the 35 candidates are presented in Figure S1 online). The data indicate that the appropriate threshold for distinguishing between true positives and noise in the microarray signal is a signal ratio of 3∼4. (A) The top 10% candidates were confirmed by real-time PCR. White and gray indicate numbers of enriched and non-enriched candidates, respectively. (B) Numbers of known (white) and newly selected (gray) proteins from conventional sequencing and the TFT arrays. The 35 candidates identified in the present study include all of the 20 Jun-interactors identified in our previous studies using conventional cloning and sequencing ( Table 1 ) [21] , [22] . Furthermore, the 35 candidates include eight well-known Jun-associated proteins, i.e. , c-Maf, Fos, Jun, Atf7, Atf4, Jdp2, Atf3 and Fosl2 ( Table 1 ), which is double the number in the previous study, in which four known Jun-interactors were obtained (white graphs of Figure 2B ) [21] , [22] . In other words, 15 proteins including four known Jun-interactors were newly detected using the TFT arrays. Previously reported interactors with Jun. TABLE: Thirty-five selected proteins Gene symbol Cloning & Sequencing Accession no. Signal ratio Locus on mRNA sequence (base) Abundance ratio in the initial library (%) Abundance ratio in the 5th round library (%) Enrichment Nrbf2 + NM_025307.2 8.255 651…950 5.7E-4 4.8E-1 840 4732436F15Rik + XM_143418.3 8.134 2051…2300 1.1E-4 1.5E+0 14,000 c-Maf * - S74567.1 7.796 1805…2004 6.4E-5 5.2E-1 8,000 SNAP19 + NM_025925.1 7.734 1…250 1.6E-3 2.2E+1 14,000 Fos * + NM_010234.2 7.720 501…800 7.4E-5 1.5E+0 20,000 Mapre3 + NM_133350.1 7.714 601…950 9.2E-4 1.4E+0 1,600 Cspg6 + NM_007790.2 7.577 2151…2700 4.1E-4 1.0E+0 2,500 Kif5A (region C) + NM_008447.2 7.491 2251…2900 3.3E-3 4.3E+0 1,300 9130229H14Rik + XM_135706.4 7.487 51…400 1.6E-3 1.2E+0 730 Jun * + NM_010591.1 7.411 1701…1950 1.4E-4 4.3E-1 3,100 Mapk8ip3 + NM_013931.1 7.282 1351…1800 7.3E-4 5.3E-1 720 Creb3 - XM_131375.2 7.172 601…800 3.3E-4 2.6E-3 8 Kif5B (region C) - NM_008448.2 7.141 2801…3200 1.3E-3 1.2E-1 95 Nef3 + NM_008691.1 7.129 951…1300 8.2E-3 1.5E+0 190 Kif5C (region C) + NM_008449.2 7.106 2701…3200 2.2E-3 6.4E+0 2,900 Eef1d + NM_029663.1 7.083 1301…1750 5.5E-3 2.3E+0 420 Atf7 * - NM_146065.1 6.999 1051…1300 2.7E-5 1.4E-1 5,000 Atf4 * + NM_009716.1 6.991 1001…1300 5.4E-4 1.9E+0 3,500 Cutl1 - NM_009986.2 6.850 301…500 1.4E-3 3.2E-1 230 Jdp2 * + NM_030887.2 6.768 451…700 7.1E-4 2.1E+0 3,000 Ofd1 - NM_177429.2 6.692 1752…2001 1.4E-4 2.6E-1 1,800 GFAP + NM_010277.1 6.551 901…1100 1.1E-3 8.8E-2 77 Kif5C (region N) + NM_008449.2 6.098 1201…1450 1.2E-2 5.2E+0 450 Psmc5 - NM_008950.1 5.961 51…300 3.5E-3 6.4E-2 19 Kif5B (region N) + NM_008448.2 5.937 1301…1550 6.4E-4 1.5E-1 230 Atf3 * - NM_007498.2 5.574 401…950 1.1E-7 2.0E-2 180,000 B130050I23Rik + NM_153536.2 5.213 1151…1450 1.9E-4 1.5E-2 80 Cebpg - XM_133383.2 5.122 401…750 3.5E-5 2.7E-3 78 1200008A14Rik + NM_028915.1 4.623 1501…1750 3.6E-4 2.1E-1 600 Myh11 - NM_013607.1 4.343 3251…3650 1.4E-4 2.9E-4 2 Tax1bp1 - NM_025816.1 4.176 501…750 2.7E-3 1.0E-2 4 Myt1 - NM_008665.2 4.084 3251…3550 1.1E-5 1.3E-4 12 Fosl2 * - NM_008037.3 3.935 401…750 2.1E-5 1.4E-2 670 Tef - NM_017376.2 3.467 851…1000 1.3E-4 1.1E-3 8 Cebpz - NM_009882.1 3.012 1451…1750 1.2E-4 3.7E-4 3 VERIFICATION OF THE NEWLY FOUND PROTEIN-PROTEIN INTERACTIONS To confirm the physical association of the 11 newly discovered candidates with Jun, we first performed in vitro pull-down assay. Seven of the 11 tested candidates exhibited specific interaction with the bZIP domain of Jun ( Figure S2 online). The affinity of the remaining four proteins, i.e. , Cutl1, Myh11, Tax1bp1 and Cebpz, for Jun may be weaker, because their enrichment ratios (excluding that of Cutl1) in the IVV screening were lower than those of others ( Table 1 ). Thus, we next employed the surface plasmon resonance (SPR) method, a highly sensitive analysis tool for protein interactions. In this case, all of the candidates except Tax1bp1 interacted with Jun in a concentration-dependent fashion ( Figure S3 online). Although most of the above tested interactions seem to be very weak, we considered that the interactions are true positives, because all of the candidates except Cebpz contain leucine-heptad repeats in the selected regions, and such repeats are an important motif for heterodimerization with Jun. Further experiments in vivo will be required to examine the physiological roles of these interactions. DISCUSSION To evaluate the quality of the interaction data, coverage and accuracy were calculated as follows. Jun interacts with many bZIP superfamily proteins and structurally unrelated transcription factors in a binary fashion. Chinenov and Kerppola comprehensively collected reported Jun-interactors in their review, and the number of mammalian Jun-interactors was 51 at that time [27] . Of the 51 interactors, some lack the potential to bind with the bait Jun protein in our experiment for various reasons. For example, the SMAD interacting region of Jun [28] was deleted from our bait protein construct, and NFAT family proteins require a DNA fragment including the AP-1 sequence [TGA(C/G)TCA] and NFAT recognition element (GGAAAA) for stable interaction with Jun [29] . Also, the expression of some of the interactors, e.g. , JunD, Fra1, Batf, MafA, Nrl and NF-IL16, was not confirmed in the cDNA library used in this study (data not shown). In all, 29 Jun-interactors were expressed in the cDNA library and were expected to bind with the bait Jun protein used here. Of these 29 proteins, four (14%) and eight (28%) were detected by the conventional sequencing and by the newly introduced TFT array method, respectively. This is a remarkable increase and confirms the value of our new methodology as a screening tool for protein interactions. While the coverage was increased considerably, the accuracy did not decrease. Specifically, the number of false positives did not increase: the rates of confirmation of proteins by in vitro pull-down assays in the previous and present studies were 75% and 74%, respectively. Further, we confirmed by SPR that most of the unbound candidates in the pull-down assay actually interacted with Jun. These results indicate that generation of false positives in this novel method is low, and that the method is practical. Undetected remaining interactors were considered to be false negatives. Mismatching of the selection conditions, e.g. , salts, detergents, and pH, or the bait construct, e.g. , length, region, and tags, might inhibit these interactions. For quantitative analysis, the abundance ratios of 35 specifically selected candidates in the initial and screened cDNA libraries were determined by real-time PCR, and the enrichment rates (abundance ratio in the 5th round library per that in the initial library) were also calculated ( Table 1 ). The abundance of the 15 newly found candidates (excluding c-Maf, Cutl1 and Ofd1) was less than the theoretical threshold determined from the results of our previous study (an analysis of 451 clones) [21] , [22] . In order to detect the least abundant candidate (Myt1; 1.3×10 −4 % of the screened cDNA library) by cloning and sequencing, it would have been necessary to analyze at least 1.0×10 6 clones. These results indicate that our new method is more sensitive, higher-throughput and more cost-effective than the previous method. From the standpoint of the detection sensitivity, the combinatorial use of the IVV method with TFT arrays provides an extremely sensitive method for protein-interaction analysis, because even a very weakly expressed target, Atf3, could be detected in this study. In the cDNA library before IVV screening, the content of fragments of the selected region of Atf3 was 1.2×10 −7 %. If one mRNA molecule existed per cell, the content of a fragment of the gene would be about 1.2×10 −5 to 5.9×10 −5 % (we employed the parameters from a reference for this calculation [30] , and the details are given in Methods S1 online). Thus, the content of Atf3 mRNA in the initial library corresponds to about one molecule per 20 to 100 cells. This suggests that Atf3 is expressed at a very low level in a cell type that is a minor component of whole mouse brain tissue. It is noteworthy that targets expressed at such low levels can be detected without the need for a cell purification procedure, e.g. , collection of somatic stem cells by flow cytometry. The high sensitivity of our method may allow access to targets which would be hard to analyze with other existing tools, e.g. , the TAP method [18] . Among the newly detected Jun-associated protein candidates, Cebpg, Creb3, and Tef are intriguing proteins as Jun-associated transcriptional regulators, because they contain basic regions near the leucine heptad motifs, which are necessary for binding with regulatory sequences on the genomic DNA; many known Jun-associated proteins contain such structures. Cebeg is a member of the CAAT/enhancer-binding protein (C/EBP) family, which is one of the largest and most highly conserved groups of eukaryotic transcription factors. Cebpg is known to interact with Cebpb, a member of the C/EBP family, but the function of the protein is not well understood [31] . Davydov et al. indicated that Cebpg binds to the positive regulatory element-I (PRE-I) of the human interleukin-4 gene by forming a heterodimer with Fos protein. However, the interaction between Cebpg and Jun was not clearly delineated [32] . Creb3 is also a transcriptional regulator belonging to the cyclic AMP response element-binding (CREB)/activating transcription factor (ATF) protein family. The bZIP region of Creb3 is strikingly similar to that of ATFa, a known partner of Jun [33] . Tef is a member of the proline and acidic amino acid-rich basic leucine zipper (PAR bZIP) transcription factor family. The PAR bZIP proteins control circadian rhythms in tissues such as the suprachiasmatic nucleus and the liver. Mice deficient in all three PAR bZIP proteins are highly susceptible to generalized spontaneous and audiogenic epilepsies that are frequently lethal [34] . No information is available about the functional relationship between Tef and Jun. More detailed studies in vivo may reveal novel and unexpected functions of Jun in combination with these proteins. In summary, we have applied tiling array technology, which has previously been used for ChIP-chip assays [26] and transcriptome analyses [20] , to protein-interaction analysis with an in vitro display technique for the first time. Compared with previous results obtained with cloning and sequencing [21] , [22] , use of the tiling array greatly increased the coverage of known Jun-interactors from 14% to 28% without any decrease of accuracy (∼75%). The new method can also detect targets expressed at extremely low levels. We believe that this highly sensitive and reliable method has the potential to be used widely, because the tiling array method can easily be extended to genome-wide scale, even though the search space is limited in tiled sequences, and the method can also be used in combination with other display technologies, such as phage display and ribosome display. SUPPORTING INFORMATION All ratio data from the tiling arrays (2.36 MB ZIP) Signal ratio and peak data of selected candidates (2.14 MB PDF) In vitro pull-down assay (1.80 MB PDF) SPR analysis (0.46 MB PDF) All detected reproducible signal peaks (0.09 MB XLS) Oligonucleotides for PCR (0.16 MB DOC) (0.05 MB DOC) REFERENCES [1] Matsumura N Doi N Yanagawa H 2006 Recent progress and future prospects in protein display technologies as tools for proteomics. Curr Proteomics 3 199 215 [2] Smith GP 1985 Filamentous fusion phage: novel expression vectors that display cloned antigens on the virion surface. Science 228 1315 1317 [3] Mattheakis LC Bhatt RR Dower WJ 1994 An in vitro polysome display system for identifying ligands from very large peptide libraries. Proc Natl Acad Sci USA 91 9022 9026 [4] He M Taussig MJ 1997 Antibody-ribosome-mRNA (ARM) complexes as efficient selection particles for in vitro display and evolution of antibody combining sites. Nucleic Acids Res 25 5132 5134 [5] Hanes J Plückthun A 1997 In vitro selection and evolution of functional proteins by using ribosome display. Proc Natl Acad Sci USA 94 4937 4942 [6] Doi N Yanagawa H 1999 STABLE: protein-DNA fusion system for screening of combinatorial protein libraries in vitro . FEBS Lett 457 227 230 [7] Nemoto N Miyamoto-Sato E Husimi Y Yanagawa H 1997 In vitro virus: bonding of mRNA bearing puromycin at the 3′-terminal end to the C-terminal end of its encoded protein on the ribosome in vitro . FEBS Lett 414 405 408 [8] Roberts RW Szostak JW 1997 RNA-peptide fusions for the in vitro selection of peptides and proteins. Proc Natl Acad Sci USA 94 12297 12302 [9] Miyamoto-Sato E Takashima H Fuse S Sue K Ishizaka M 2003 Highly stable and efficient mRNA templates for mRNA-protein fusions and C-terminally labeled proteins. Nucleic Acids Res 31 e78 [10] Keefe AD Szostak JW 2001 Functional proteins from a random-sequence library. Nature 410 715 718 [11] Hanes J Jermutus L Weber-Bornhauser S Bosshard HR Plückthun A 1998 Ribosome display efficiently selects and evolves high-affinity antibodies in vitro from immune libraries. Proc Natl Acad Sci USA 95 14130 14135 [12] Fukuda I Kojoh K Tabata N Doi N Takashima H 2006 In vitro evolution of single-chain antibodies using mRNA display. Nucleic Acids Res 34 e127 [13] Hammond PW Alpin J Rise CE Wright M Kreider BL 2001 In vitro selection and characterization of Bcl-X(L)-binding proteins from a mix of tissue-specific mRNA display libraries. J Biol Chem 276 20898 20906 [14] Miyamoto-Sato E Ishizaka M Horisawa K Tateyama S Takashima H 2005 Cell-free cotranslation and selection using in vitro virus for high-throughput analysis of protein-protein interactions and complexes. Genome Res 15 710 717 [15] McPherson M Yang Y Hammond PW Kreider BL 2002 Drug receptor identification from multiple tissues using cellular-derived mRNA display libraries. Chem Biol 9 691 698 [16] Tateyama S Horisawa K Takashima H Miyamoto-Sato E Doi N 2006 Affinity selection of DNA-binding protein complexes using mRNA display. Nucleic Acids Res 34 e27 [17] Fields S Song O 1989 A novel genetic system to detect protein-protein interactions. Nature 340 245 246 [18] Puig O Caspary F Rigaut G Rutz B Bouveret E 2001 The tandem affinity purification (TAP) method: a general procedure of protein complex purification. Methods 24 218 229 [19] Margulies M Egholm M Altman WE Attiya S Bader JS 2005 Genome sequencing in microfabricated high-density picolitre reactors. Nature 437 376 380 [20] Kapranov P Cawley SE Drenkow J Bekiranov S Strausberg RL 2002 Large-scale transcriptional activity in chromosomes 21 and 22. Science 296 916 919 [21] Horisawa K Tateyama S Ishizaka M Matsumura N Takashima H 2004 In vitro selection of Jun-associated proteins using mRNA display. Nucleic Acids Res 32 e169 [22] Horisawa K Doi N Takashima H Yanagawa H 2005 Application of quantitative real-time PCR for monitoring the process of enrichment of clones on in vitro protein selection. J Biochem 137 121 124 [23] Gunji W Kai T Sameshima E Iizuka N Katagi H 2004 Global analysis of the expression patterns of transcriptional regulatory factors in formation of embryoid bodies using sensitive oligonucleotide microarray systems. Biochem Biophys Res Commun 325 265 275 [24] 't Hoen PA de Kort F van Ommen GJ den Dunnen JT 2003 Fluorescent labelling of cRNA for microarray applications. Nucleic Acids Res 31 e20 [25] Nuwaysir EF Huang W Albert TJ Singh J Nuwaysir K 2002 Gene expression analysis using oligonucleotide arrays produced by maskless photolithography. Genome Res 12 1749 1755 [26] Kim TH Barrera LO Zheng M Qu C Singer MA 2005 A high-resolution map of active promoters in the human genome. Nature 436 876 880 [27] Chinenov Y Kerppola TK 2001 Close encounters of many kinds: Fos-Jun interactions that mediate transcription regulatory specificity. Oncogene 20 2438 2452 [28] Liberati NT Datto MB Frederick JP Shen X Wong C 1999 Smads bind directly to the Jun family of AP-1 transcription factors. Proc Natl Acad Sci USA 96 4844 4849 [29] Jain J McCaffrey PG Miner Z Kerppola TK Lambert JN 1993 The T-cell transcription factor NFATp is a substrate for calcineurin and interacts with Fos and Jun. Nature 365 352 355 [30] Campbell NA 1996 Biology, 4th Ed. New York The Benjamin/Cummings Publishing Company Inc [31] Schrem H Klempnauer J Borlak J 2004 Liver-enriched transcription factors in liver function and development. Part II: the C/EBPs and D site-binding protein in cell cycle control, carcinogenesis, circadian gene regulation, liver regeneration, apoptosis, and liver-specific gene regulation. Pharmacol Rev. 56 291 330 [32] Davydov IV Bohmann D Krammer PH Li-Weber M 1995 Cloning of the cDNA encoding human C/EBP gamma, a protein binding to the PRE-I enhancer element of the human interleukin-4 promoter. Gene 161 271 275 [33] Lu R Yang P O'Hare P Misra V 1997 Luman, a new member of the CREB/ATF family, binds to herpes simplex virus VP16-associated host cellular factor. Mol Cell Biol. 17 5117 5126 [34] Gachon F Fonjallaz P Damiola F Gos P Kodama T 2004 The loss of circadian PAR bZip transcription factors results in epilepsy. Genes Dev. 18 1397 1412