Eur. Phys. J. C (2019) 79:826 https://doi.org/10.1140/epjc/s10052-019-7358-3 Regular Article - Theoretical Physics Isotropization and change of complexity by gravitational decoupling R. Casadio1,2,a , E. Contreras3,b , J. Ovalle4,5,c , A. Sotomayor6,d , Z. Stuchlik4,e 1 Dipartimento di Fisica e Astronomia, Alma Mater Università di Bologna, via Irnerio 46, 40126 Bologna, Italy 2 Istituto Nazionale di Fisica Nucleare, Sezione di Bologna, I.S. FLAG viale Berti Pichat 6/2, 40127 Bologna, Italy 3 School of Physical Sciences and Nanotechnology, Yachay Tech University, 100119 Urcuquí, Ecuador 4 Institute of Physics and Research Centre of Theoretical Physics and Astrophysics, Faculty of Philosophy and Science, Silesian University in Opava, 746 01 Opava, Czech Republic 5 Departamento de Física, Universidad Simón Bolívar, Apartado 89000, Caracas 1080A, Venezuela 6 Departamento de Matemáticas, Universidad de Antofagasta, Antofagasta, Chile Received: 5 September 2019 / Accepted: 29 September 2019 / Published online: 8 October 2019 © The Author(s) 2019 Abstract We employ the gravitational decoupling approach for static and spherically symmetric systems to develop a simple and powerful method in order to (a) continuously isotropize any anisotropic solution of the Einstein field equations, and (b) generate new solutions for self-gravitating distributions with the same or vanishing complexity factor. A few working examples are given for illustrative purposes. 1 Introduction The gravitational decoupling (GD) was introduced in Ref. [1] as a systematic approach to study static and spherically symmetric self-gravitating systems governed by the Einstein field equations1 Rμν − 1 R gμν = k 2 T̃μν , 2 (1) and containing (at least) two sources which only interact gravitationally. In its extended version, both time and radial components of the metric are affected and these sources could exchange energy–momentum to provide the decoupling of Einstein’s equations [2]. The total energy–momentum tensor can thus be expressed as 1 We shall use units with the speed of light c = 1 and k 2 = 8 π G where G N is Newton’s constant. a e-mail: casadio@bo.infn.it b e-mail: econtreras@yachaytech.edu.ec c e-mail: jovalle@usb.ve d e-mail: adrian.sotomayor@uantof.cl e e-mail: zdenek.stuchlik@fpf.slu.cz N, T̃μν = Tμν + α θμν , (2) where the constant α is here introduced for tracking the effects of θμν with respect to Tμν . As we will review briefly in the next Section, the key fact is that Eq. (1) can be split (continuously in α) into two sets of equations, one given by the Einstein field equations for the first source Tμν (obtained in the limit α = 0) and a set of “quasi”-Einstein equations (proportional to α) which describes the changes introduced by adding the second source θμν (fully recovered for α = 1). The way this split is implemented is by deforming the metric functions which solve the first set, the deformation being then determined by the second set provided θμν is also given. In fact, the GD is a generalization of the minimal geometric deformation which was developed in Refs. [3,4] in the context of the Randall-Sundrum brane-world [5,6], where the geometric deformation is induced by the existence of extra spatial dimensions and α is naturally proportional to the inverse of the brane tension [7–19] (for some resent applications see also [20–23]). The main applications of this approach so far [24–48] were to build new solutions of Eq. (1) with α = 1 starting from known solutions generated by Tμν alone (that is, with α = 0). In order to complete this construction, one needs to make assumptions about the second source, for instance by fixing the equation of state for the tensor θμν (for the application of the GD beyond general relativity, see for instance Refs. [49,50]). In this paper we are instead interested in the different purpose of showing that the GD can be used to directly control specific physical properties of a self-gravitating system. For the sake of simplicity, we shall employ the minimal geometric deformation (MGD) in which only the radial component of the metric is modified and there is no direct exchange 123 826 Page 2 of 8 Eur. Phys. J. C (2019) 79:826 of energy between the two energy–momentum tensors in Eq. (2). We shall then require that the complete system (for α = 1) enjoys specific properties, equal or different from those of the case α = 0. In particular, we shall first require that the anisotropic pressure for α = 0 becomes isotropic for α = 1 in Sect. 3 and impose conditions on the complexity factor which was recently introduced in Ref. [51] in Sect. 4. It is important to remark that the MGD does not involve any perturbative expansion and all results will be exact for all values of α. Finally we summarise our conclusions in Sect. 5. We briefly review how the (M)GD works by starting from the standard Einstein field equations (1) with two sources (2), 1 R gμν = k 2 (Tμν + α θμν ), 2 (3) where the parameter α will be set to 0 (respectively 1) when we want to discard (fully include) the second source θμν . Since the Einstein tensor in Eq. (3) satisfies the Bianchi identity, the total source in Eq. (2) must be conserved, that is ∇μ T̃ μν = 0. (4) For static spherically symmetric systems, the metric components gμν in Schwarzschild-like coordinates read ds 2 = eν(r ) dt 2 − eλ(r ) dr 2 − r 2 d2 , (5) where ν = ν(r ) and λ = λ(r ) are functions of the areal radius r only and d denotes the usual solid angle measure. The metric (5) must satisfy the Einstein equations (3) which, in terms of the two sources in (2), explicitly read 1 [1 − e−λ (1 − r λ )] r2 1 k 2 (T1 1 + α θ11 ) = 2 [1 − e−λ (1 + r ν  )] r e−λ   (λ ν − 2 ν  − ν 2 ) k 2 (T2 2 + α θ22 ) = 4 e−λ  (ν − λ ), − 2r k 2 (T0 0 + α θ00 ) = (6) (7) (8) where f  ≡ ∂r f and T̃3 3 = T̃2 2 due to the spherical symmetry. The conservation equation (4) is a linear combination of Eqs. (6)–(8) and reads ν 2 (T̃0 0 − T̃1 1 ) − (T̃2 2 − T̃1 1 ) 2 r ν 2 1  0 1 = (T1 ) − (T0 − T1 ) − (T2 2 − T1 1 ) 2 r   ν 0 2 2 1  1 1 + α (θ1 ) − (θ0 − θ1 ) − (θ2 − θ1 ) . 2 r 0 = (T̃1 1 ) − 123 ρ̃ = T0 0 + α θ00 ≡ ρ + ρθ , (10) an effective radial pressure p̃r = −T1 1 − α θ11 ≡ pr + pθr , (11) and an effective tangential pressure p̃t = −T2 2 − α θ22 ≡ pt + pθt . (12) These definitions clearly lead to the total anisotropy ˜ ≡ p̃t − p̃r ≡ 2 Gravitational decoupling of Einstein’s equations Rμν − We can clearly identify in Eqs. (6)–(8) an effective density + θ, (13) where = pt − pr (14) measures the anisotropy generated by the first source like θ does for the second one. We will now implement the GD by considering a solution to Eqs. (6)–(9) with α = 0, which we formally write as ds 2 = eξ(r ) dt 2 − eμ(r ) dr 2 − r 2 d2 , (15) where e −μ(r ) k2 ≡1− r  r 0 x 2 T00 (x) d x = 1 − 2 m(r ) r (16) is the standard general relativistic expression containing the Misner–Sharp mass function m = m(r ). The general effects of the second source θμν can then be encoded in the geometric deformation undergone by the geometric functions ξ → ν = ξ + α g and e−μ → e−λ = e−μ + α f. (17) From now on we just consider the simplest case of the MGD with a minimal deformation g(r ) = 0, hence only the radial metric component will be modified and ν = ξ . With the decomposition (17), the Einstein equations (6)–(8) split into two coupled sets: (i) the standard Einstein field equations for the energy–momentum tensor Tμν and metric (15), 1 [1 − e−μ (1 − r μ )] k2 r 2 1 pr = − 2 2 [1 − e−μ (1 + r ξ  )] k r   e−μ ξ  − μ , pt = − 2 μ ξ  − 2 ξ  − ξ 2 − 2 4k r ρ= (18) (19) (20) with the conservation equation (9) pr + ξ 2 (ρ + pr ) = ; 2 r (21) Eur. Phys. J. C (2019) 79:826 Page 3 of 8 826 and (ii) the quasi-Einstein field equations for the second source θμν ,   r f α f (22) ρθ = − 2 2 1 + k r f α f pθr = 2 2 (1 + r ξ  ) (23) k r    f α f ξ 2  2 2 ξ + ξ + , (24) pθt = + ξ + 2 4 k2 r f r whose conservation equation likewise reads  pθr + ξ 2 θ (ρθ + pθr ) = . 2 r (25) In the previous section, we noticed that the total anisotropy ˜ in Eq. (13) can be different from the anisotropy generated by the source Tμν . We can therefore consider an anisotropic = 0 which is system (18)–(21) generated by Tμν with transformed into the isotropic system (6)–(9) with ˜ = 0 as a consequence of adding the source θμν . This change can be formally controlled by varying the parameter α, with α = 0 representing the anisotropic system (18)–(21), and α = 1 representing the isotropic system (6)–(9), for which ˜ = 0, or . (26) Replacing Eqs. (23) and (24) in the condition (26) yields a differential equation for the geometric deformation in Eq. (17), namely f 4 k2     f 2 2 ξ 4   2 + 2 2ξ +ξ − ξ + − 2 + r 4k r r 2M R 2 M e−μ(R) = 1 − R pr (R) = 0 eξ(R) = 1 − (33) (34) (35) are the necessary and sufficient conditions for a smooth matching of the two metrics. This yields 3 Isotropization of compact sources 1 2 θ ≡ θ1 − θ2 = − (albeit not unique, as pointed out in Ref. [52]) is in terms of a cluster of particles moving in randomly oriented circular orbits [53]. The constants A and B can be determined from the matching conditions between this interior solution and the exterior metric for r > R. If we assume the exterior is the Schwarzschild vacuum, = 0. A2 R−3M , = 2 R M B2 = 1 − 3M , R (36) where R > 3 M or M/R < 1/3 in order to have A2 > 0 and B 2 > 0. Plugging the solution (28)–(32) in the differential equation (27), we obtain the geometric deformation   1 1 r 2 (A2 + r 2 ) (37) − 2 , f (r ) = A2 + 2 r 2 A2 + 3 r 2 where is an integration constant with dimensions of a length. Using the metric functions (17) and (28) in the field equation (7), the effective radial pressure in (11) is expressed as p̃r = α f (r )(A2 + 3 r 2 ) . k 2 r 2 (A2 + r 2 ) (38) Hence, the matching condition (35) for the outer Schwarzschild space-time yields (27) As an example, we will implement the above approach in order to isotropize the compact self-gravitating system sustained only by tangential stresses described by   r2 (28) eξ = B 2 1 + 2 , A A2 + r 2 , A2 + 3 r 2 6(A2 + r 2 ) ρ= 2 2 , k (A + 3 r 2 )2 3 r2 , pt = 2 2 k (A + 3 r 2 )2 pr = 0, e−μ = (29) (30) (31) (32) where 0 ≤ r ≤ R and r = R defines the surface of the compact object. A direct interpretation of this class of solutions f (R) = 0, (39) which in turn leads to 2 = A2 + 3 R 2 , (40) and the deformation takes the final form f (r ) = 3 r 2 (A2 + r 2 )(R 2 − r 2 ) (A2 + 2 r 2 )(A2 + 3 r 2 )(A2 + 3 R 2 ) (41) Notice that the Misner–Sharp mass function m̃ of the system (6)–(8) is related with the mass function (16) of the system (18)–(20) by the simple expression α r f (r ) r (1 − e−λ ) ≡ m̃(r ) = m(r ) − . 2 2 (42) 123 826 Page 4 of 8 Eur. Phys. J. C (2019) 79:826 Fig. 1 Isotropization: the radial pressure [ p̃ × 103 ] for different values of the parameter α for a distribution with compactness M/R = 0.2 Fig. 2 Isotropization: total anisotropy [ × 103 ] for different values of the parameter α for a distribution with compactness M/R = 0.2 Hence, a direct consequence of (39) is that the total mass is the same for both cases, namely e.g. Refs. [55,56]). The main characteristic of this notion is that it assigns a zero value of the complexity factor to uniform and isotropic distributions (the least complex system). The complexity of a given static and spherically symmetric self-gravitating system is measured by the complexity factor YTF , which is a scalar function defined in terms of the anisotropy and gradient ρ  of the energy-density as [51] m̃(R) = m(R) = M, (43) and therefore the values of the constants A and B remain the same as shown in (36). The deformation (41) generates an effective density ρ̃(r, α) = ρ(r ) − α 18 r 8 − 6 r 6 R 2 + A6 (5 r 2 − 3 R 2 ) + 2 A4 (11 r 4 − 5 r 2 R 2 ) + A2 (31 r 6 − 9 r 4 R 2 ) , k 2 (A2 + 2 r 2 )2 (A2 + 3 r 2 )2 (A2 + 2 R 2 ) an effective radial pressure p̃r (r, α) = 3 α(R 2 − r 2 ) , k 2 (A2 + 2r 2 )(A2 + 3 R 2 ) (45) and an effective tangential pressure p̃t = p̃r + ˜ where the total anisotropy is given by ˜ (r, α) = 3 (1 − α) r 2 k 2 (A2 + 3 r 2 )2 , (46) which vanishes, by construction, for α = 1. The expressions (28), (42) and (10)–(46) are exact solutions of the Einstein field equations (6)–(8) for all values of α. We can further see that the case α = 0 represents the anisotropic model in (28)–(32), which is continuously deformed into the isotropic case represented by α = 1. Hence we can follow in details the isotropization process by continuously varying the parameter α between these two values [see Figs 1, 2, where the effective pressure in Eq. (45) and the anisotropy in Eq. (46) are shown for a few values of α]. YTF (r ) = k 2 The notion of complexity for static and spherically symmetric self-gravitating systems we are interested in here was introduced recently in Ref. [51], and further extended to the dynamical case in Ref. [54] (for some applications, see 123 k2 2 r3  r x 3 ρ  (x) d x. (47) 0 It describes the influence of these two functions on the Tolman mass m T which, for the same distribution of matter, is defined as  k 2 r (ξ +λ)/2 e (ρ + pr + 2 pt )x 2 d x. (48) m T (r ) = 2 0 The above definition gives the energy contained inside a fluid sphere of radius r , and it has a clear physical interpretation. In fact, we recall that we can write the Tolman mass as a function of the metric components in Eq. (5) as r 2 ξ  (ξ −λ)/2 e (49) 2 and that the gravitational acceleration of a test particle, instantaneously at rest in the static gravitational field (5), is given by mT = e−ξ/2 m T , (50) r2 which shows that m T is the active gravitational mass (for more details, see Refs. [52,57]). In terms of the complexity factor, we can write the Tolman mass as a=− 4 Complexity of compact sources (r ) − (44) Eur. Phys. J. C (2019) 79:826 m T = MT  r 3 R +r 3 Page 5 of 8 826  R r e(ξ +λ)/2 YTF d x, x (51) where MT represents the total Tolman mass of an isotropic and uniform stellar system of the same radius R. Hence, we see that YTF can quantify the departure of the Tolman mass m T of a given system from the Tolman mass MT of a uniform isotropic fluid when the anisotropy and density gradient do not vanish. It is in fact clear from Eq. (47) that a uniform isotropic fluid will have zero complexity factor, but this does not mean that a stellar configuration with vanishing complexity factor is uniform and isotropic. From Eq. (47) we see that the complexity factor for the system (6)–(8) takes the form  r k2 − 3 r̃ 3 ρ̃  d r̃ ỸTF = k 2r 0  r k2 = k2 − 3 r̃ 3 ρ  d r̃ 2r 0  r k2 + k2 θ − 3 r̃ 3 ρθ  d r̃ , 2r 0 2 ˜ (52) which we can write as (53) θ are the complexity factors correspondwhere YTF and YTF ing to the systems (18)–(20) and (22)–(24) respectively. We conclude that the complexity factor is an additive quantity. Hence, the complexity factor of a gravitational system formed by two coexisting gravitational sources, Tμν and θμν , will be the sum of the complexity factors of the two sources. We remark that this result is independent of the MGD described in Sect. 2, but it implies that we can employ the GD in order to relate two different systems with the same or different complexity factors. 4.1 Two systems with the same complexity factor We first consider a case in which the complexity factor YTF associated with the energy–momentum tensor Tμν remains invariant after we add the second source θμν , that is ỸTF = θ = 0 or YTF , and therefore YTF 1 θ = 2 r3 0  r 0 r2 ) A2 (C 2 − r 2 )(A2 + r 2 ) , e−μ = C 2 (A2 + 2 r 2 ) r̃ 3 ρθ d r̃ . (54) r̃ 3 ρθ d r̃ = α k2  f f − r2 2r (57) (58) which is generated by the density ρ= 3 A4 + A2 (3 C 2 + 7 r 2 ) + 2 r 2 (C 2 + 3 r 2 ) , k 2 C 2 (A2 + 2 r 2 )2 (59) and isotropic pressure p= C 2 − A2 − 3 r 2 . k 2 C 2 (A2 + 2 r 2 ) (60) The constants A, B and C are again determined from the matching conditions (33)–(35), which yield the same values (36) and R C2 . = 2 R M (61) From the definition (47) we obtain the complexity factor YTF = (A2 + 2 C 2 )r 2 . C 2 (A2 + 2 r 2 )2 (62) From the metric function (57), we can then compute the deformation which keeps this factor unchanged by solving Eq. (56), and obtain Using Eqs. (22)–(24) yields 1 2 r3 Any solution of Eq. (56) can be used to determine the source θμν through (22)–(24). In other words, given a solution with metric functions ξ and μ for the Einstein field equations (18)– (20), we can find a second solution to (6)–(8) with the same complexity factor by imposing the condition (54). Like with isotropization in Sect. 3, the parameter α can be implemented to continuously follow this process by identifying the original solution with the case α = 0 and the final solution with α = 1. However, since Eq. (56) does not contain α, we can now actually require that the complexity remains the same for all values of α. By implementing this procedure we will moreover find that the matching conditions (33)–(35) play a fundamental role in the determination of the final result in that the condition ỸTF = YTF can only be satisfied if we change the compactness of the system. Let us start by considering as solution to (18)–(20) the Tolman IV metric for perfect fluids [58], eξ = B 2 (1 + θ ỸTF = YTF + YTF ,  r and the condition (54) becomes the first order differential equation     8 4 2 ξ (56) + f 2 ξ  + ξ 2 − − 2 = 0. f  ξ + r r r  (55) f (r ) = r 2 (A2 + r 2 ) , 2 (2 A2 + 3 r 2 ) (63) 123 826 Page 6 of 8 Eur. Phys. J. C (2019) 79:826 where is an integration constant (with dimensions of length). According to (17), the new radial metric component therefore reads e−λ = α r 2 (A2 + r 2 ) (C 2 − r 2 )(A2 + r 2 ) + 2 2 2 2 C (A + 2 r ) (2 A2 + 3 r 2 ) (64) and generates an effective density ρ̃(r, α, ) = ρ(r ) − α(6 A4 + 13 A2 r 2 + 9 r 4 ) , 2 k 2 (2 A2 + 3 r 2 )2 (65) Fig. 3 Complexity factor [ỸTF × 10] for different values of the parameter α starting from the Tolman IV isotropic solution (α = 0) an effective radial pressure p̃r (r, α, ) = p(r ) + α(A2 + 3 r 2 ) , 2 k 2 (2 A2 + 3 r 2 ) (66) and an effective tangential pressure p̃t = p̃r + ˜ where the anisotropy is given by α A2 r 2 ˜ (r, α, ) = . 2 k 2 (2 A2 + 3 r 2 )2 4.2 Generating solutions with zero complexity (67) The expressions (57) and (64)–(67) describe an exact solution of the Einstein field equations (6)–(8). This is a new anisotropic version of the Tolman IV solution (57)–(60), whose complexity factor ỸTF is formally the same as that in Eq. (62). However, after imposing the matching conditions (33)–(35) to determine the new values for A, B and C in the solution (57) and (64)–(67), we find that A and B have the same expressions as shown in Eq. (36), but C is promoted to a function of the anisotropic parameter α (and the length ), namely Cα2 = α(A2 + 2 R 2 )(A2 + 3 R 2 )2 R3 − , 4 M α(A + 5 A2 R 2 + 6 R 4 ) + 2 (2 A2 + 3 R 2 ) (68) and the complexity factor becomes ỸTF (r, α, ) = [A2 + 2 Cα2 ]r 2 Cα2 (A2 + 2r 2 )2 . for α = 1.2 Using Eqs. (22)–(24) in the condition (71), we obtain the first order differential equation for the geometric deformation f 4     f 8 4 2 ξ ξ + + 2 ξ  + ξ 2 − − 2 + YTF = 0, r 4 r r (72) whose solution can be used to generate a system with vanishing complexity factor ỸTF = 0 for α = 1. Let us consider again the Tolman IV solution (57)–(60). Using the metric function (57) and the complexity factor (62), Eq. (72) can be solved exactly to yield f = R3 . M (70) In the above equation for Mα and Rα , we can set α = 1 without loss of generality, but we are still left with the freedom to set the arbitrary length scale . This means that 123 We will now show how one can build a solution with ỸTF = 0 starting from a first solution with YTF = 0. According to Eq. (53), we can therefore require the condition  r k2 r̃ 3 ρθ  d r̃ = 0, (71) ỸTF = YTF + k 2 θ − 3 2r 0 (69) Comparing the expressions (62) and (69) shows that varying α in fact changes the complexity factor (see Fig. 3) unless we also change the mass M → Mα and the radius R → Rα in such a way that Cα (Mα , Rα ) = C(M, R) = we can generate a continuous family of systems with different mass M and radius R but the same total complexity factor YTF in Eq. (62).  2 (A2 + 2 C 2 )  r 2 (A2 + r 2 ) 1 + , 2 (2 A2 + 3 r 2 ) 2 C 2 (A2 + 2r 2 ) (73) where is an arbitrary integration constant with dimensions of a length. The corresponding new radial metric component will change the complexity factor in Eq. (62) to ỸTF (r, α) = (1 − α) (A2 + 2 C 2 )r 2 , C 2 (A2 + 2 r 2 )2 (74) θ in Eq. (13) and ρθ in Eq. (10) are both proportional to α, so that they vanish for α = 0 by construction. 2 We recall that Eur. Phys. J. C (2019) 79:826 Page 7 of 8 826 mass M and radius R but vanishing complexity parametrized by the length scale . 5 Conclusions Fig. 4 Radial pressure [ p̃ × 103 ] for the Tolman IV solution (YTF = 0) and its anisotropic version with ỸTF = 0 for a distribution with compactness M/R = 0.2 which precisely interpolates continuously between the original value (for α = 0) and vanishing complexity (for α = 1). Note that the arbitrary scale does not appear explicitly in Eq. (74). However, it will affect the value of the constant C via the matching conditions like in the previous case. For α = 1, we can determine all relevant quantities explicitly. The matching conditions (33)–(35) with the outer Schwarzschild vacuum yield the same A and B shown in Eq. (36), while C is now given by 3 2 (A2 + 3 R 2 ) . 2(A2 + 3 R 2 + 3 2 ) C2 = (75) The radial metric component then takes the final form e−λ = (A2 + r 2 )(2 A2 − 3 r 2 + 6 R 2 ) , (2 A2 + 3 r 2 )(A2 + 3 R 2 ) (76) the effective radial pressure reads (see also Fig. 4) p̃r = 9(R 2 − r 2 ) , k 2 (2 A2 + 3 r 2 )(A2 + 3R 2 ) (77) the effective density is 3[8 A4 + 2 A2 (7 r 2 + 3 R 2 ) + 3 r 2 (3 r 2 + R 2 )] ρ̃ = , (78) k 2 (2 A2 + 3 r 2 )2 (A2 + 3R 2 ) and the effective tangential pressure p̃t = p̃r + ˜ , where the anisotropy is given by ˜ =− 3 r 2 (2 A2 + 3 R 2 ) k 2 (2 A2 + 3 r 2 )2 (A2 + 3 R 2 ) . (79) The main difference with respect to the case in Sect. 4.1 is that the complexity (74) vanishes for α = 1 regardless of M and R, and therefore for any values of : we have mapped the Tolman IV fluid of given mass M, radius R and complexity (62) into a whole family of systems with the same The GD approach is a very effective way to investigate selfgravitating systems with sources described by more than one (spherically symmetric) energy–momentum tensor. Given an exact solution generated by one of such sources, it will allow one to obtain exact solutions with more sources. In most of the previous papers, new solutions were obtained by assuming particular equations of state for the added energy–momentum tensors, or field equations for the added matter sources. In this work we have instead considered the different task of employing the GD in order to impose specific physical properties satisfied by the whole system. In order to keep the presentation simpler, we just considered two energy–momentum tensors and the MGD in which only the radial component of the metric is modified, although the approach can be straightforwardly generalised to more sources and to the GD in which the time component of the metric is deformed as well. The specific properties we required were isotropic pressure starting from the anisotropic solution (28)–(32) and control over the complexity factor starting from the Tolman IV solution (57)–(60). The examples we provided are mostly meant to illustrate the flexibility and effectiveness of our procedure and different physical requirements could indeed be demanded. Acknowledgements R. C. is partially supported by the INFN Grant FLAG and his work has also been carried out in the framework of activities of the National Group of Mathematical Physics (GNFM, INdAM) and COST action em Cantata. J. O. thanks Luis Herrera for useful discussion and comments. J. O. acknowledges the support of the Institute of Physics and Research Centre of Theoretical Physics and Astrophysics, at the Silesian University in Opava. A. S. is partially supported by Project Fondecyt 1161192 and MINEDUC-UA project, code ANT 1855. S. Z. has been supported by the Czech Science Agency Grant no. 19-03950S. Data Availability Statement This manuscript has no associated data or the data will not be deposited. [Authors’ comment: This is a theoretical work. No experimental data was used.] Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecomm ons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. Funded by SCOAP3 . References 1. J. Ovalle, Phys. Rev. D 95, 104019 (2017). arXiv:1704.05899 (preprint) 123 826 Page 8 of 8 2. J. Ovalle, Phys. Lett. B 788, 213–218 (2019). arXiv:1812.03000 (preprint) 3. J. Ovalle, Mod. Phys. Lett. A 23, 3247–3263 (2008). arXiv:gr-qc/0703095 (preprint) 4. J. Ovalle, Braneworld stars: anisotropy minimally projected onto the brane. in 9th Asia-Pacific International Conference on Gravitation and Astrophysics (ICGA 9) Wuhan, China, June 28–July 2, 2009, pp. 173–182. (2009). arXiv:gr-qc/0909.0531) (preprint) 5. L. Randall, R. Sundrum, Phys. Rev. Lett. 83, 3370–3373 (1999). arXiv:hep-ph/9905221 (preprint) 6. L. Randall, R. Sundrum, Phys. Rev. Lett. 83, 4690–4693 (1999). arXiv:hep-th/9906064 (preprint) 7. R. Casadio, J. Ovalle, R. da Rocha, Class. Quant. Grav. 32, 215020 (2015). arXiv:1503.02873 (preprint) 8. J. Ovalle, Extending the geometric deformation: new black hole solutions. in Proceedings, 9th Alexander Friedmann International Seminar on Gravitation and Cosmology and 3rd Satellite Symposium on the Casimir Effect: St. Petersburg, Russia, June 21–27, 2015. (2015). arXiv:1510.00855 [Int. J. Mod. Phys. Conf. Ser. 41, 1660132 (2016)] (preprint) 9. R. Casadio, J. Ovalle, Phys. Lett. B 715, 251–255 (2012). arXiv:1201.6145 (preprint) 10. J. Ovalle, F. Linares, Phys. Rev. D 88, 104026 (2013). arXiv:1311.1844 (preprint) 11. J. Ovalle, F. Linares, A. Pasqua, A. Sotomayor, Class. Quant. Grav. 30, 175019 (2013). arXiv:1304.5995 (preprint) 12. R. Casadio, J. Ovalle, R. da Rocha, Class. Quant. Grav. 31, 045016 (2014). arXiv:1310.5853 (preprint) 13. J. Ovalle, L.A. Gergely, R. Casadio, Class. Quant. Grav. 32, 045015 (2015). arXiv:1405.0252 (preprint) 14. R. Casadio, J. Ovalle, R. da Rocha, EPL 110, 40003 (2015). arXiv:1503.02316 (preprint) 15. R.T. Cavalcanti, A.G. da Silva, R. da Rocha, Class. Quant. Grav. 33, 215007 (2016). arXiv:1605.01271 (preprint) 16. R. Casadio, R. da Rocha, Phys. Lett. B 763, 434–438 (2016). arXiv:1610.01572 (preprint) 17. R. da Rocha, Phys. Rev. D 95, 124017 (2017). arXiv:1701.00761 (preprint) 18. R. da Rocha, Eur. Phys. J. C 77, 355 (2017). arXiv:1703.01528 (preprint) 19. A. Fernandes-Silva, R. da Rocha, Eur. Phys. J. C 78, 271 (2018). arXiv:1708.08686 (preprint) 20. R. Casadio, P. Nicolini, R. da Rocha, Class. Quant. Grav. 35, 185001 (2018). arXiv:1709.09704 (preprint) 21. A. Fernandes-Silva, A.J. Ferreira-Martins, R. Da Rocha, Eur. Phys. J. C 78, 631 (2018). arXiv:1803.03336 (preprint) 22. A. Fernandes-Silva, A.J. Ferreira-Martins, R. da Rocha, Phys. Lett. B 791, 323–330 (2019). arXiv:1901.07492 (preprint) 23. R. Da Rocha, A.A Tomaz. (2019). arXiv:1905.01548 (preprint) 24. J. Ovalle, R. Casadio, R. da Rocha, A. Sotomayor, Eur. Phys. J. C 78, 122 (2018). arXiv:1708.00407 (preprint) 25. L. Gabbanelli, A. Rincón, C. Rubio, Eur. Phys. J. C 78, 370 (2018). arXiv:1802.08000 (preprint) 26. J. Ovalle, R. Casadio, Rd Rocha, A. Sotomayor, Z. Stuchlik, Eur. Phys. J. C C78, 960 (2018). arXiv:1804.03468 123 Eur. Phys. J. C (2019) 79:826 27. M. Sharif, S. Sadiq, Eur. Phys. J. C 78, 410 (2018). arXiv:1804.09616 (preprint) 28. E. Contreras, Eur. Phys. J. C 78, 678 (2018). arXiv:1807.03252 (preprint) 29. M. Sharif, S. Sadiq, Eur. Phys. J. Plus 133, 245 (2018) 30. E. Contreras, P. Bargueño, Eur. Phys. J. C 78, 558 (2018). arXiv:1805.10565 (preprint) 31. E. Morales, F. Tello-Ortiz, Eur. Phys. J. C 78, 618 (2018). arXiv:1805.00592 (preprint) 32. C.L. Heras, P. Leon, Fortsch. Phys. 66, 1800036 (2018). arXiv:1804.06874 (preprint) 33. E. Morales, F. Tello-Ortiz, Eur. Phys. J. C 78, 841 (2018). arXiv:1808.01699 (preprint) 34. E. Contreras, P. Bargueño, Eur. Phys. J. C 78, 985 (2018). arXiv:1809.09820 (preprint) 35. G. Panotopoulos, A. Rincón, Eur. Phys. J. C 78, 851 (2018). arXiv:1810.08830 (preprint) 36. J. Ovalle, R. Casadio, R. da Rocha, A. Sotomayor, Z. Stuchlik, EPL 124, 20004 (2018). arXiv:1811.08559 (preprint) 37. E. Contreras, Class. Quant. Grav. 36, 095004 (2019). arXiv:1901.00231 (preprint) 38. S.K. Maurya, F. Tello-Ortiz, Eur. Phys. J. C 79, 85 (2019) 39. E. Contreras, A. Rincón, P. Bargueño, Eur. Phys. J. C 79, 216 (2019). arXiv:1902.02033 (preprint) 40. E. Contreras, P. Bargueño. (2019). arXiv:1902.09495 (preprint) 41. L. Gabbanelli, J. Ovalle, A. Sotomayor, Z. Stuchlik, R. Casadio, Eur. Phys. J. C 79, 486 (2019). arXiv:1905.10162 (preprint) 42. J. Ovalle, C. Posada, Z. Stuchlík. (2019). arXiv:1905.12452 (preprint) 43. S. Hensh, Z. Stuchlík. (2019). arXiv:1906.08368 (preprint) 44. F.X.L. Cedeño, E. Contreras. (2019). arXiv:1907.04892 (preprint) 45. P. León, A. Sotomayor. (2019). arXiv:1907.11763 (preprint) 46. S.K. Maurya, F. Tello-Ortiz. (2019). arXiv:1907.13456 (preprint) 47. V. Torres, E. Contreras. (2019). arXiv:1908.08194 (preprint) 48. A. Rincon, L. Gabbanelli, E. Contreras, F. Tello-Ortiz. (2019). arXiv:1909.00500 (preprint) 49. M. Sharif, S. Saba, Eur. Phys. J. C 78, 921 (2018). arXiv:1811.08112 (preprint) 50. M. Estrada, (2019). arXiv:1905.12129 (preprint) 51. L. Herrera, Phys. Rev. D 97, 044010 (2018). arXiv:1801.08358 (preprint) 52. L. Herrera, N.O. Santos, Phys. Rep. 286, 53–130 (1997) 53. A. Einstein, Ann. Math. 40, 922–936 (1939) 54. L. Herrera, A. Di Prisco, J. Ospino, Phys. Rev. D 98, 104059 (2018). arXiv:1811.08364 (preprint) 55. G. Abbas, H. Nazar, Eur. Phys. J. C 78, 510 (2018). arXiv:1806.05042 (preprint) 56. M. Sharif, I.I. Butt, Eur. Phys. J. C 78, 688 (2018). arXiv:1808.00903 (preprint) 57. L. Herrera, A. Di Prisco, J.L. Hernandez-Pastora, N.O. Santos, Phys. Lett. A 237, 113–118 (1998). arXiv:gr-qc/9711002 (preprint) 58. R.C. Tolman, Phys. Rev. 55, 364–373 (1939)