Eur. Phys. J. C (2017) 77:466 DOI 10.1140/epjc/s10052-017-5031-2 Regular Article - Experimental Physics Jet reconstruction and performance using particle flow with the ATLAS Detector ATLAS Collaboration CERN, 1211 Geneva 23, Switzerland Received: 31 March 2017 / Accepted: 27 June 2017 / Published online: 13 July 2017 © CERN for the benefit of the ATLAS collaboration 2017. This article is an open access publication Abstract This paper describes the implementation and performance of a particle flow algorithm applied to 20.2 fb−1 of ATLAS data from 8 TeV proton–proton collisions in Run 1 of the LHC. The algorithm removes calorimeter energy deposits due to charged hadrons from consideration during jet reconstruction, instead using measurements of their momenta from the inner tracker. This improves the accuracy of the charged-hadron measurement, while retaining the calorimeter measurements of neutral-particle energies. The paper places emphasis on how this is achieved, while minimising double-counting of charged-hadron signals between the inner tracker and calorimeter. The performance of particle flow jets, formed from the ensemble of signals from the calorimeter and the inner tracker, is compared to that of jets reconstructed from calorimeter energy deposits alone, demonstrating improvements in resolution and pile-up stability. Contents 1 2 3 4 5 6 Introduction . . . . . . . . . . . . . . . . . . . . . 1 ATLAS detector . . . . . . . . . . . . . . . . . . . 3 Simulated event samples . . . . . . . . . . . . . . 5 3.1 Detector simulation and pile-up modelling . . 5 3.2 Truth calorimeter energy and tracking information . . . . . . . . . . . . . . . . . . . . . 5 Data sample . . . . . . . . . . . . . . . . . . . . . 5 Topological clusters . . . . . . . . . . . . . . . . . 6 Particle flow algorithm . . . . . . . . . . . . . . . 6 6.1 Containment of showers within a single topocluster . . . . . . . . . . . . . . . . . . . . . 7 6.2 Track selection . . . . . . . . . . . . . . . . 9 6.3 Matching tracks to topo-clusters . . . . . . . 10 6.4 Evaluation of the expected deposited particle clus / p trk > determination 12 energy through < E ref ref 6.4.1 Layer of highest energy density . . . . 13 6.5 Recovering split showers . . . . . . . . . . . 15 6.6 Cell-by-cell subtraction . . . . . . . . . . . . 15  e-mail: atlas.publications@cern.ch 6.7 Remnant removal . . . . . . . . . . . . . . . 16 Performance of the subtraction algorithm at truth level . . . . . . . . . . . . . . . . . . . . . . . . . 17 7.1 Track–cluster matching performance . . . . . 17 7.2 Split-shower recovery performance . . . . . . 18 7.3 Accuracy of cell subtraction . . . . . . . . . 19 7.4 Visualising the subtraction . . . . . . . . . . 20 8 Jet reconstruction and calibration . . . . . . . . . . 21 8.1 Overview of particle flow jet calibration . . . 22 8.2 Area-based pile-up correction . . . . . . . . . 22 8.3 Monte Carlo numerical inversion . . . . . . . 22 8.4 Global sequential correction . . . . . . . . . 23 8.5 In situ validation of JES . . . . . . . . . . . . 23 9 Resolution of jets in Monte Carlo simulation . . . . 24 9.1 Transverse momentum resolution . . . . . . . 24 9.2 Angular resolution of jets . . . . . . . . . . . 24 10 Effect of pile-up on the jet resolution and rejection of pile-up jets . . . . . . . . . . . . . . . . . . . . 25 10.1 Pile-up jet rate . . . . . . . . . . . . . . . . . 26 10.2 Pile-up effects on jet energy resolution . . . . 27 11 Comparison of data and Monte Carlo simulation . . 28 11.1 Individual jet properties . . . . . . . . . . . . 28 11.2 Event-level observables . . . . . . . . . . . . 28 12 Conclusions . . . . . . . . . . . . . . . . . . . . . 31 References . . . . . . . . . . . . . . . . . . . . . . . . 33 7 1 Introduction Jets are a key element in many analyses of the data collected by the experiments at the Large Hadron Collider (LHC) [1]. The jet calibration procedure should correctly determine the jet energy scale and additionally the best possible energy and angular resolution should be achieved. Good jet reconstruction and calibration facilitates the identification of known resonances that decay to hadronic jets, as well as the search for new particles. A complication, at the high luminosities encountered by the ATLAS detector [2], is that multiple interactions can contribute to the detector signals associated with a single bunch-crossing (pile-up). These interactions, which 123 466 Page 2 of 47 Eur. Phys. J. C (2017) 77:466 are mostly soft, have to be separated from the hard interaction that is of interest. Pile-up contributes to the detector signals from the collision environment, and is especially important for higherintensity operations of the LHC. One contribution arises from particle emissions produced by the additional proton– proton ( pp) collisions occurring in the same bunch crossing as the hard-scatter interaction (in-time pile-up). Further pileup influences on the signal are from signal remnants in the ATLAS calorimeters from the energy deposits in other bunch crossings (out-of-time pile-up). In Run 1 of the LHC, the ATLAS experiment used either solely the calorimeter or solely the tracker to reconstruct hadronic jets and soft particle activity. The vast majority of analyses utilised jets that were built from topological clusters of calorimeter cells (topo-clusters) [3]. These jets were then calibrated to the particle level using a jet energy scale (JES) correction factor [4–7]. For the final Run 1 jet calibration, this correction factor also took into account the tracks associated with the jet, as this was found to greatly improve the jet resolution [4]. ‘Particle flow’ introduces an alternative approach, in which measurements from both the tracker and the calorimeter are combined to form the signals, which ideally represent individual particles. The energy deposited in the calorimeter by all the charged particles is removed. Jet reconstruction is then performed on an ensemble of ‘particle flow objects’ consisting of the remaining calorimeter energy and tracks which are matched to the hard interaction. The chief advantages of integrating tracking and calorimetric information into one hadronic reconstruction step are as follows: • The design of the ATLAS detector [8] specifies a calorimeter energy resolution for single charged pions in the centre of the detector of 50% 1% σ (E) = √ ⊕ 3.4% ⊕ , E E E (1) while the design inverse transverse momentum resolution for the tracker is   1 · pT = 0.036% · pT ⊕ 1.3%, σ (2) pT where energies and transverse momenta are measured in GeV. Thus for low-energy charged particles, the momentum resolution of the tracker is significantly better than the energy resolution of the calorimeter. Furthermore, the acceptance of the detector is extended to softer particles, as tracks are reconstructed for charged particles with a minimum transverse momentum pT > 400 MeV, whose energy deposits often do not pass the noise thresholds required to seed topo-clusters [9]. 123 • The angular resolution of a single charged particle, reconstructed using the tracker is much better than that of the calorimeter. • Low- pT charged particles originating within a hadronic jet are swept out of the jet cone by the magnetic field by the time they reach the calorimeter. By using the track’s azimuthal coordinate1 at the perigee, these particles are clustered into the jet. • When a track is reconstructed, one can ascertain whether it is associated with a vertex, and if so the vertex from which it originates. Therefore, in the presence of multiple in-time pile-up interactions, the effect of additional particles on the hard-scatter interaction signal can be mitigated by rejecting signals originating from pile-up vertices.2 The capabilities of the tracker in reconstructing charged particles are complemented by the calorimeter’s ability to reconstruct both the charged and neutral particles. At high energies, the calorimeter’s energy resolution is superior to the tracker’s momentum resolution. Thus a combination of the two subsystems is preferred for optimal event reconstruction. Outside the geometrical acceptance of the tracker, only the calorimeter information is available. Hence, in the forward region the topo-clusters alone are used as inputs to the particle flow jet reconstruction. However, particle flow introduces a complication. For any particle whose track measurement ought to be used, it is necessary to correctly identify its signal in the calorimeter, to avoid double-counting its energy in the reconstruction. In the particle flow algorithm described herein, a Boolean decision is made as to whether to use the tracker or calorimeter measurement. If a particle’s track measurement is to be used, the corresponding energy must be subtracted from the calorimeter measurement. The ability to accurately subtract all of a single particle’s energy, without removing any energy deposited by any other particle, forms the key performance criterion upon which the algorithm is optimised. Particle flow algorithms were pioneered in the ALEPH experiment at LEP [10]. They have also been used in the H1 [11], ZEUS [12,13] and DELPHI [14] experiments. Subsequently, they were used for the reconstruction of hadronic τ -lepton decays in the CDF [15], D0 [16] and ATLAS [17] 1 ATLAS uses a right-handed coordinate system with its origin at the nominal interaction point (IP) in the centre of the detector and the z-axis along the beam direction. The x-axis points from the IP to the centre of the LHC ring, and the y-axis points upward. Cylindrical coordinates (r, φ) are used in the transverse plane, φ being the azimuthal angle around the z-axis. The pseudorapidity is defined in terms of the polar angle θ as η = − ln tan(θ/2). Angular distance is measured in units of R = (φ)2 + (η)2 . 2 The standard ATLAS reconstruction defines the primary  hard-scatter vertex to be the primary vertex with the largest pT2 of the associated tracks. All other primary vertices are considered to be contributed by pile-up. Eur. Phys. J. C (2017) 77:466 experiments. In the CMS experiment at the LHC, large gains in the performance of the reconstruction of hadronic jets and τ leptons have been seen from the use of particle flow algorithms [18–20]. Particle flow is a key ingredient in the design of detectors for the planned International Linear Collider [21] and the proposed calorimeters are being optimised for its use [22]. While the ATLAS calorimeter already measures jet energies precisely [6], it is desirable to explore the extent to which particle flow is able to further improve the ATLAS hadronic-jet reconstruction, in particular in the presence of pile-up interactions. This paper is organised as follows. A description of the detector is given in Sect. 2, the Monte Carlo (MC) simulated event samples and the dataset used are described in Sects. 3 and 4, while Sect. 5 outlines the relevant properties of topoclusters. The particle flow algorithm is described in Sect. 6. Section 7 details the algorithm’s performance in energy subtraction at the level of individual particles in a variety of cases, starting from a single pion through to dijet events. The building and calibration of reconstructed jets is covered in Sect. 8. The improvement in jet energy and angular resolution is shown in Sect. 9 and the sensitivity to pile-up is detailed in Sect. 10. A comparison between data and MC simulation is shown in Sect. 11 before the conclusions are presented in Sect. 12. 2 ATLAS detector The ATLAS experiment features a multi-purpose detector designed to precisely measure jets, leptons and photons produced in the pp collisions at the LHC. From the inside out, the detector consists of a tracking system called the inner detector (ID), surrounded by electromagnetic (EM) sampling Page 3 of 47 466 calorimeters. These are in turn surrounded by hadronic sampling calorimeters and an air-core toroid muon spectrometer (MS). A detailed description of the ATLAS detector can be found in Ref. [2]. The high-granularity silicon pixel detector covers the vertex region and typically provides three measurements per track. It is followed by the silicon microstrip tracker which usually provides eight hits, corresponding to four two-dimensional measurement points, per track. These silicon detectors are complemented by the transition radiation tracker, which enables radially extended track reconstruction up to |η| = 2.0. The ID is immersed in a 2 T axial magnetic field and can reconstruct tracks within the pseudorapidity range |η| < 2.5. For tracks with transverse momentum pT < 100 GeV, the fractional inverse momentum resolution σ (1/ pT )· pT measured using 2012 data, ranges from approximately 2–12% depending on pseudorapidity and pT [23]. The calorimeters provide hermetic azimuthal coverage in the range |η| < 4.9. The detailed structure of the calorimeters within the tracker acceptance strongly influences the development of the shower subtraction algorithm described in this paper. In the central barrel region of the detector, a high-granularity liquid-argon (LAr) electromagnetic calorimeter with lead absorbers is surrounded by a hadronic sampling calorimeter (Tile) with steel absorbers and active scintillator tiles. The same LAr technology is used in the calorimeter endcaps, with fine granularity and lead absorbers for the EM endcap (EMEC), while the hadronic endcap (HEC) utilises copper absorbers with reduced granularity. The solid angle coverage is completed with forward copper/LAr and tungsten/LAr calorimeter modules (FCal) optimised for electromagnetic and hadronic measurements respectively. Figure 1 shows the physical location of the different calorimeters. To achieve a high spatial resolution, Fig. 1 Cut-away view of the ATLAS calorimeter system 123 466 Page 4 of 47 Eur. Phys. J. C (2017) 77:466 Table 1 The granularity in η × φ of all the different ATLAS calorimeter layers relevant to the tracking coverage of the inner detector EM LAr calorimeter Barrel Presampler Endcap 0.025 × π/32 |η| < 1.52 0.025 × π/32 1.5 < |η| < 1.8 PreSamplerB/E 1st layer 0.025/8 × π/32 |η| < 1.4 0.050 × π/32 1.375 < |η| < 1.425 EMB1/EME1 0.025 × π/128 1.4 < |η| < 1.475 0.025 × π/32 1.425 < |η| < 1.5 0.025/8 × π/32 1.5 < |η| < 1.8 0.025/6 × π/32 1.8 < |η| < 2.0 0.025/4 × π/32 2.0 < |η| < 2.4 0.025 × π/32 2.4 < |η| < 2.5 0.1 × π/32 2.5 < |η| < 3.2 2nd layer 0.025 × π/128 |η| < 1.4 0.050 × π/128 1.375 < |η| < 1.425 EMB2/EME2 0.075 × π/128 1.4 < |η| < 1.475 0.025 × π/128 1.425 < |η| < 2.5 0.1 × π/32 2.5 < |η| < 3.2 0.050 × π/128 1.5 < |η| < 2.5 3rd layer 0.050 × π/128 |η| < 1.35 EMB3/EME3 Tile calorimeter Barrel 1st layer Extended barrel 0.1 × π/32 |η| < 1.0 0.1 × π/32 0.8 < |η| < 1.7 0.1 × π/32 |η| < 1.0 0.1 × π/32 0.8 < |η| < 1.7 0.2 × π/32 |η| < 1.0 0.2 × π/32 0.8 < |η| < 1.7 TileBar0/TileExt0 2nd layer TileBar1/TileExt1 3rd layer TileBar2/TileExt2 Hadronic LAr calorimeter Endcap 1st layer 0.1 × π/32 1.5 < |η| < 2.5 HEC0 0.2 × π/16 2.5 < |η| < 3.2 2nd layer 0.1 × π/32 1.5 < |η| < 2.5 HEC1 0.2 × π/16 2.5 < |η| < 3.2 3rd layer 0.1 × π/32 1.5 < |η| < 2.5 HEC2 0.2 × π/16 2.5 < |η| < 3.2 4th layer 0.1 × π/32 1.5 < |η| < 2.5 HEC3 0.2 × π/16 2.5 < |η| < 3.2 the calorimeter cells are arranged in a projective geometry with fine segmentation in φ and η. Additionally, each of the calorimeters is longitudinally segmented into multiple layers, capturing the shower development in depth. In the region |η| < 1.8, a presampler detector is used to correct for the energy lost by electrons and photons upstream of the calorimeter. The presampler consists of an active LAr layer of thickness 1.1 cm (0.5 cm) in the barrel (endcap) region. The granularity of all the calorimeter layers within the tracker acceptance is given in Table 1. The EM calorimeter is over 22 radiation lengths in depth, ensuring that there is little leakage of EM showers into 123 the hadronic calorimeter. The total depth of the complete calorimeter is over 9 interaction lengths in the barrel and over 10 interaction lengths in the endcap, such that good containment of hadronic showers is obtained. Signals in the MS are used to correct the jet energy if the hadronic shower is not completely contained. In both the EM and Tile calorimeters, most of the absorber material is in the second layer. In the hadronic endcap, the material is more evenly spread between the layers. The muon spectrometer surrounds the calorimeters and is based on three large air-core toroid superconducting magnets with eight coils each. The field integral of the toroids ranges Eur. Phys. J. C (2017) 77:466 from 2.0 to 6.0 Tm across most of the detector. It includes a system of precision tracking chambers and fast detectors for triggering. 3 Simulated event samples A variety of MC samples are used in the optimisation and performance evaluation of the particle flow algorithm. The simplest samples consist of a single charged pion generated with a uniform spectrum in the logarithm of the generated pion energy and in the generated η. Dijet samples generated with Pythia 8 (v8.160) [24,25], with parameter values set to the ATLAS AU2 tune [26] and the CT10 parton distribution functions (PDF) set [27], form the main samples used to derive the jet energy scale and determine the jet energy resolution in simulation. The dijet samples are generated with a series of jet pT thresholds applied to the leading jet, reconstructed from all stable final-state particles excluding muons and neutrinos, using the anti-kt algorithm [28] with radius parameter 0.6 using FastJet (v3.0.3) [29,30]. For comparison with collision data, Z → μμ events are generated with Powheg- Box (r1556) [31] using the CT10 PDF and are showered with Pythia 8, with the ATLAS AU2 tune. Additionally, top quark pair production is simulated with MC@NLO (v4.03) [32,33] using the CT10 PDF set, interfaced with Herwig (v6.520) [34] for parton showering, and the underlying event is modelled by Jimmy (v4.31) [35]. The top quark samples are normalised using the cross-section calculated at next-to-next-to-leading order (NNLO) in QCD including resummation of next-to-next-to-leading logarithmic soft gluon terms with top++2.0 [36–43], assuming a top quark mass of 172.5 GeV. Single-top-quark production processes contributing to the distributions shown are also simulated, but their contributions are negligible. 3.1 Detector simulation and pile-up modelling All samples are simulated using Geant4 [44] within the ATLAS simulation framework [45] and are reconstructed using the noise threshold criteria used in 2012 data-taking [3]. Single-pion samples are simulated without pile-up, while dijet samples are simulated under three conditions: with no pile-up; with pile-up conditions similar to those in the 2012 data; and with a mean number of interactions per bunch crossing μ = 40, where μ follows a Poisson distribution. In 2012, the mean value of μ was 20.7 and the actual number of interactions per bunch crossing ranged from around 10 to 35 depending on the luminosity. The bunch spacing was 50 ns. When compared to data, the MC samples are reweighted to have the same distribution of μ as present in the data. In all the samples simulated including pile-up, effects from both the same bunch crossing and previous/subsequent crossings Page 5 of 47 466 are simulated by overlaying additional generated minimumbias events on the hard-scatter event prior to reconstruction. The minimum-bias samples are generated using Pythia 8 with the ATLAS AM2 tune [46] and the MSTW2009 PDF set [47], and are simulated using the same software as the hard-scatter event. 3.2 Truth calorimeter energy and tracking information For some samples the full Geant4 hit information [44] is retained for each calorimeter cell such that the true amount of hadronic and electromagnetic energy deposited by each generated particle is known. Only the measurable hadronic and electromagnetic energy deposits are counted, while the energy lost due to nuclear capture and particles escaping from the detector is not included. For a given charged pion the sum of these hits in a given cluster i originating from this particle clus i . is denoted by E true, π Reconstructed topo-cluster energy is assigned to a given truth particle according to the proportion of Geant4 hits supplied to that topo-cluster by that particle. Using the Geant4 hit information in the inner detector a track is matched to a generated particle based on the fraction of hits on the track which originate from that particle [48]. 4 Data sample Data acquired during the period from March to December 2012 with the LHC operating at a pp centre-of-mass energy of 8 TeV are used to evaluate the level of agreement between data and Monte Carlo simulation of different outputs of the algorithm. Two samples with a looser preselection of events are reconstructed using the particle flow algorithm. A tighter selection is then used to evaluate its performance. First, a Z → μμ enhanced sample is extracted from the 2012 dataset by selecting events containing two reconstructed muons [49], each with pT > 25 GeV and |η| < 2.4, where the invariant mass of the dimuon pair is greater than 55 GeV, and the pT of the dimuon pair is greater than 30 GeV. Similarly, a sample enhanced in t t¯ → bb̄q q̄μν events is obtained from events with an isolated muon and at least one hadronic jet which is required to be identified as a jet containing b-hadrons (b-jet). Events are selected that pass single-muon triggers and include one reconstructed muon satisfying pT > 25 GeV, |η| < 2.4, for which the sum of additional track momenta in a cone of size R = 0.2 around the muon track is less than 1.8 GeV. Additionally, a reconstructed calorimeter jet is required to be present with pT > 30 GeV, |η| < 2.5, and pass the 70% working point of the MV1 b-tagging algorithm [50]. 123 466 Page 6 of 47 For both datasets, all ATLAS subdetectors are required to be operational with good data quality. Each dataset corresponds to an integrated luminosity of 20.2 fb−1 . To remove events suffering from significant electronic noise issues, cosmic rays or beam background, the analysis excludes events that contain calorimeter jets with pT > 20 GeV which fail to satisfy the ‘looser’ ATLAS jet quality criteria [51,52]. 5 Topological clusters Eur. Phys. J. C (2017) 77:466 responses that are lower than the EM scale, by amounts depending on where the showers develop. To account for this, the mean ratio of the energy deposited by a particle to the momentum of the particle is determined based on the position of the particle’s shower in the detector, as described in Sect. 6.4. A local cluster (LC) weighting scheme is used to calibrate hadronic clusters to the correct scale [3]. Further development is needed to combine this with particle flow; therefore, in this work the topo-clusters used in the particle flow algorithm are calibrated at the EM scale. The lateral and longitudinal segmentation of the calorimeters permits three-dimensional reconstruction of particle showers, implemented in the topological clustering algorithm [3]. Topo-clusters of calorimeter cells are seeded by cells whose absolute energy measurements |E| exceed the expected noise by four times its standard deviation. The expected noise includes both electronic noise and the average contribution from pile-up, which depends on the run conditions. The topoclusters are then expanded both laterally and longitudinally in two steps, first by iteratively adding all adjacent cells with absolute energies two standard deviations above noise, and finally adding all cells neighbouring the previous set. A splitting step follows, separating at most two local energy maxima into separate topo-clusters. Together with the ID tracks, these topo-clusters form the basic inputs to the particle flow algorithm. The topological clustering algorithm employed in ATLAS is not designed to separate energy deposits from different particles, but rather to separate continuous energy showers of different nature, i.e. electromagnetic and hadronic, and also to suppress noise. The cluster-seeding threshold in the topo-clustering algorithm results in a large fraction of lowenergy particles being unable to seed their own clusters. For example, in the central barrel ∼25% of 1 GeV charged pions do not seed their own cluster [9]. While the granularity, noise thresholds and employed technologies vary across the different ATLAS calorimeters, they are initially calibrated to the electromagnetic scale (EM scale) to give the same response for electromagnetic showers from electrons or photons. Hadronic interactions produce A cell-based energy subtraction algorithm is employed to remove overlaps between the momentum and energy measurements made in the inner detector and calorimeters, respectively. Tracking and calorimetric information is combined for the reconstruction of hadronic jets and soft activity (additional hadronic recoil below the threshold used in jet reconstruction) in the event. The reconstruction of the soft activity is important for the calculation of the missing transverse momentum in the event [53], whose magnitude is denoted by E Tmiss . The particle flow algorithm provides a list of tracks and a list of topo-clusters containing both the unmodified topoclusters and a set of new topo-clusters resulting from the energy subtraction procedure. This algorithm is sketched in Fig. 2. First, well-measured tracks are selected following the criteria discussed in Sect. 6.2. The algorithm then attempts to match each track to a single topo-cluster in the calorimeter (Sect. 6.3). The expected energy in the calorimeter, deposited by the particle that also created the track, is computed based on the topo-cluster position and the track momentum (Sect. 6.4). It is relatively common for a single particle to deposit energy in multiple topo-clusters. For each track/topo-cluster system, the algorithm evaluates the probability that the particle energy was deposited in more than one topo-cluster. On this basis it decides if it is necessary to add more topo-clusters to the track/topo-cluster system to recover the full shower energy (Sect. 6.5). The Fig. 2 A flow chart of how the particle flow algorithm proceeds, starting with track selection and continuing until the energy associated with the selected tracks has been removed from the calorimeter. At the end, charged particles, topo-clusters which have not been modified by the algorithm, and remnants of topo-clusters which have had part of their energy removed remain 123 6 Particle flow algorithm Eur. Phys. J. C (2017) 77:466 expected energy deposited in the calorimeter by the particle that produced the track is subtracted cell by cell from the set of matched topo-clusters (Sect. 6.6). Finally, if the remaining energy in the system is consistent with the expected shower fluctuations of a single particle’s signal, the topo-cluster remnants are removed (Sect. 6.7). This procedure is applied to tracks sorted in descending pT -order, firstly to the cases where only a single topo-cluster is matched to the track, and then to the other selected tracks. This methodology is illustrated in Fig. 3. Details about each step of the procedure are given in the rest of this section. After some general discussion of the properties of topo-clusters in the calorimeter, the energy subtraction procedure for each track is described. The procedure is accompanied by illustrations of performance metrics used to validate the configuration of the algorithm. The samples used for the validation are single-pion and dijet MC samples without pile-up, as described in the previous section. Charged pions dominate the charged component of the jet, which on average makes up two-thirds of the visible jet energy [54,55]. Another quarter of the jet energy is contributed by photons from neutral hadron decays, and the remainder is carried by neutral hadrons that reach the calorimeter. Because the majority of tracks are generated by charged pions [56], particularly at low pT , the pion mass hypothesis is assumed for all tracks used by the particle flow algorithm to reconstruct jets. Likewise the energy subtraction is based on the calorimeter’s response to charged pions. In the following sections, the values for the parameter set and the performance obtained for the 2012 dataset are discussed. These parameter values are not necessarily the product of a full optimisation, but it has been checked that the performance is not easily improved by variations of these choices. Details of the optimisation are beyond the scope of the paper. 6.1 Containment of showers within a single topo-cluster The performance of the particle flow algorithm, especially the shower subtraction procedure, strongly relies on the topological clustering algorithm. Hence, it is important to quantify the extent to which the clustering algorithm distinguishes individual particles’ showers and how often it splits a single particle’s shower into more than one topocluster. The different configurations of topo-clusters containing energy from a given single pion are classified using two variables. For a given topo-cluster i, the fraction of the particle’s true energy contained in the topo-cluster (see Sect. 3.2), with respect to the total true energy deposited by the particle in all clustered cells, is defined as Page 7 of 47 466 εiclus = clus i E true, π all topo−clusters E true, π , (3) clus i is the true energy deposited in topo-cluster i by where E true, π all topo−clusters the generated particle under consideration and E true, π is the true energy deposited in all topo-clusters by that truth particle. For each particle, the topo-cluster with the highest value of εiclus is designated the leading topo-cluster, for which clus = ε clus . The minimum number of topo-clusters needed εlead i to capture least 90% of the particle’s true energy, i.e. such n atclus εi > 90%, is denoted by n 90 that i=0 clus . Topo-clusters can contain contributions from multiple particles, affecting the ability of the subtraction algorithm to separate the energy deposits of different particles. The purity ρiclus for a topo-cluster i is defined as the fraction of true energy within the topo-cluster which originates from the particle of interest: ρiclus = clus i E true, π clus i E true, all particles . (4) For the leading topo-cluster, defined by having the highest clus . εiclus , the purity value is denoted by ρlead Only charged particles depositing significant energy (at least 20% of their true energy) in clustered cells are considered in the following plots, as in these cases there is significant energy in the calorimeter to remove. This also avoids the case where insufficient energy is present in any cell to form a cluster, which happens frequently for very low-energy particles [3]. Figure 3 illustrates how the subtraction procedure is designed to deal with cases of different complexity. Four different scenarios are shown covering cases where the charged pion deposits its energy in one cluster, in two clusters, and where there is a nearby neutral pion which either deposits its energy in a separate cluster or the same cluster as the charged pion. Several distributions are plotted for the dijet sample in which the energy of the leading jet, measured at truth level, is in the range 20 < pTlead < 500 GeV. The distribution of clus is shown in Fig. 4 for different p true and ηtrue bins. εlead T clus decreases as the p of the particle It can be seen that εlead T increases and very little dependence on η is observed. Figure 90 5 shows the distribution of n 90 clus . As expected, n clus increases with particle pT . It is particularly interesting to know the fraction of particles for which at least 90% of the true energy is contained in a single topo-cluster (n 90 clus = 1) and this is clus . shown in Fig. 6. Lastly, Fig. 7 shows the distribution of ρlead true This decreases as pT increases and has little dependence on |ηtrue |. For more than 60% of particles with 1 < pTtrue < 2 GeV, the shower is entirely contained within a single topo-cluster 123 466 Page 8 of 47 Fig. 3 Idealised examples of how the algorithm is designed to deal with several different cases. The red cells are those which have energy from the π + , the green cells energy from the photons from the π 0 decay, the dotted lines represent the original topo-cluster boundaries with those outlined in blue having been matched by the algorithm to 123 Eur. Phys. J. C (2017) 77:466 the π + , while those in black are yet to be selected. The different layers in the electromagnetic calorimeter (Presampler, EMB1, EMB2, EMB3) are indicated. In this sketch only the first two layers of the Tile calorimeter are shown (TileBar0 and TileBar1) Eur. Phys. J. C (2017) 77:466 (a) Page 9 of 47 466 (b) Fig. 4 Distribution of the fraction of the total true energy in the leading clus , for charged pions which deposit significant energy topo-cluster, εlead (20% of the particle’s energy) in the clustered cells for three different pTtrue bins in three |ηtrue | regions. The data are taken from a dijet sample (a) (b) (c) without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band (c) Fig. 5 Distributions of the number of topo-clusters required to contain > 90% of the true deposited energy of a single charged pion which deposits significant energy (20% of the particle’s energy) in the clustered cells. The distributions are shown for three pTtrue bins in three |ηtrue | regions. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band clus ∼ 1). This fraction falls rapidly with particle p , reach(εlead T ing ∼ 25% for particles in the range 5 < pTtrue < 10 GeV. For particles with pTtrue < 2 GeV, 90% of the particle energy can be captured within two topo-clusters in ∼ 95% of cases. The topo-cluster purity also falls as the pion pT increases, with the target particle only contributing between 38 and 45% of the topo-cluster energy when 5 < pTtrue < 10 GeV. This is in part due to the tendency for high- pT particles to be produced in dense jets, while softer particles from the underlying event tend to be isolated from nearby activity. In general, the subtraction of the hadronic shower is easier for cases with topo-clusters with high ρiclus , and high εiclus , since in this configuration the topo-clustering algorithm has separated out the contributions from different particles. must have no missing Pixel hits when such hits would be expected [57]. This selection is designed such that the number of badly measured tracks is minimised and is referred to as ‘tight selection’. No selection cuts are made on the association to the hard scatter vertex at this stage Additionally, tracks are required to be within |η| < 2.5 and have pT > 0.5 GeV. These criteria remain efficient for tracks from particles which are expected to deposit energy below the threshold needed to seed a topo-cluster or particles that do not reach the calorimeter. Including additional tracks by reducing the pT requirement to 0.4 GeV leads to a substantial increase in computing time without any corresponding improvement in jet resolution. This is due to their small contribution to the total jet pT . Tracks with pT > 40 GeV are excluded from the algorithm, as such energetic particles are often poorly isolated from nearby activity, compromising the accurate removal of the calorimeter energy associated with the track. In such cases, with the current subtraction scheme, there is no advan- 6.2 Track selection Tracks are selected which pass stringent quality criteria: at least nine hits in the silicon detectors are required, and tracks 123 clus Probability (n90 =1) 466 Page 10 of 47 Eur. Phys. J. C (2017) 77:466 1 0.9 0.0<|ηtrue|<1.0 1.0<|ηtrue|<2.0 2.0<|ηtrue|<2.5 ATLAS Simulation s = 8 TeV 0.8 0.7 0.6 0.5 0.4 0.3 0.2 5 10 15 20 25 30 35 40 ptrue [GeV] T Fig. 6 The probability that a single topo-cluster contains > 90% of the true deposited energy of a single charged pion, which deposits significant energy (20% of the particle’s energy) in the clustered cells. The distributions are shown as a function of pTtrue in three |ηtrue | regions. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band tage in using the tracker measurement. This requirement was tuned both by monitoring the effectiveness of the energy subtraction using the true energy deposited in dijet MC events, and by measuring the jet resolution in MC simulation. The majority of tracks in jets with pT between 40 and 60 GeV have pT below 40 GeV, as shown later in Sect. 11. In addition, any tracks matched to candidate electrons [58] or muons [49], without any isolation requirements, identified with medium quality criteria, are not selected and therefore are not considered for subtraction, as the algorithm is optimised for the subtraction of hadronic showers. The energy deposited in the calorimeter by electrons and muons is hence (a) (b) clus , defined for a selected charged pion as the fracFig. 7 The purity ρlead tional contribution of the chosen particle to the total true energy in the clus >50%. Distributions are leading topo-cluster, shown for pions with εlead shown for several pTtrue bins and in three |ηtrue | regions. The data are 123 taken into account in the particle flow algorithm and any resulting topo-clusters are generally left unsubtracted. Figure 8 shows the charged-pion track reconstruction efficiency, for the tracks selected with the criteria described above, as a function of ηtrue and pTtrue in the dijet MC sample, with leading jets in the range 20 < pTlead < 1000 GeV and with similar pile-up to that in the 2012 data. The Monte Carlo generator information is used to match the reconstructed tracks to the generated particles [48]. The application of the tight quality criteria substantially reduces the rate of poorly measured tracks, as shown in Fig. 9. Additionally, using the above selection, the fraction of combinatorial fake tracks arising from combining ID hits from different particles is negligible [48]. 6.3 Matching tracks to topo-clusters To remove the calorimeter energy where a particle has formed a single topo-cluster, the algorithm first attempts to match each selected track to one topo-cluster. The distances φ and η between the barycentre of the topo-cluster and the track, extrapolated to the second layer of the EM calorimeter, are computed for each topo-cluster. The topo-clusters are ranked based on the distance metric     φ 2 η 2  + , (5) R = σφ ση where ση and σφ represent the angular topo-cluster widths, computed as the standard deviation of the displacements of the topo-cluster’s constituent cells in η and φ with respect to the topo-cluster barycentre. This accounts for the spatial extent of the topo-clusters, which may contain energy deposits from multiple particles. The distributions of ση and σφ for single-particle samples are shown in Fig. 10. The structure seen in these distribu- (c) taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band Page 11 of 47 466 ATLAS Simulation 0.95 Track Reconstruction Efficiency Track Reconstruction Efficiency Eur. Phys. J. C (2017) 77:466 s = 8 TeV 0.9 0.85 0.8 0.75 1 < ptrue < 2 GeV T 2 < ptrue < 5 GeV T 5 < ptrue < 10 GeV T 0.7 0.65 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 0.95 ATLAS Simulation s = 8 TeV 0.9 0.85 0.8 0.75 |ηtrue|<1.0 0.7 1.0<|ηtrue|<2.0 0.65 2.0<|ηtrue|<2.5 2.5 1 10 true η (b) (a) 105 1 < ptrue < 2 GeV T Nominal reconstruction After hit requirements |ηtrue|<1.0 ATLAS Simulation s = 8 TeV 104 ciency as a function of pT in three |η| bins. A simulated dijet sample is used, with similar pile-up to that in the 2012 data, and for which 20 < pTlead < 1000 GeV. The statistical uncertainties in the number of MC simulated events are shown in a darker shading Tracks / 400 MeV / nb-1 Tracks / 400 MeV / nb-1 Fig. 8 The track reconstruction efficiency for charged pions after applying the tight quality selection criteria to the tracks. Subfigure (a) shows the efficiency for 1–2 GeV, 2–5 GeV and 5–10 GeV particles as a function of η, while (b) shows the track reconstruction effi- 106 ptrue [GeV] T 103 102 10 104 5 < ptrue < 10 GeV T Nominal reconstruction After hit requirements 2.0<|ηtrue|<2.5 103 ATLAS Simulation s = 8 TeV 102 10 1 1 10-1 10-1 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 -2 0 2 ptrk -ptrue [GeV] T T (a) 1 < ptrue < 2 GeV, T |ηtrue | < 1.0. 4 6 8 10 ptrk -ptrue [GeV] T T (b) 5 < ptrue < 10 GeV, T 2.0 < |ηtrue | < 2.5. Fig. 9 The difference between the reconstructed pT of the track from a charged pion and the particle’s true pT for two bins in truth particle pT and |η|, determined in dijet MC simulation with similar pile-up to that in the 2012 data. The shaded bands represent the statistical uncertainty. The tails in the residuals are substantially diminished upon the applica- tion of the more stringent silicon detector hit requirements. A simulated dijet sample with 20 < pTlead < 1000 GeV is used, and the statistical uncertainties in the number of MC simulated events are shown as a hatched band tions is related to the calorimeter geometry. Each calorimeter layer has a different cell granularity in both dimensions, and this sets the minimum topo-cluster size. In particular, the granularity is significantly finer in the electromagnetic calorimeter, thus particles that primarily deposit their energy in either the electromagnetic and hadronic calorimeters form distinct populations. High-energy showers typically spread over more cells, broadening the corresponding topo-clusters. If the computed value of ση or σφ is smaller than 0.05, it is set to 0.05. A preliminary selection of topo-clusters to be matched to the tracks is performed by requiring that E clus / p trk > 0.1, where E clus is the energy of the topo-cluster and p trk is the track momentum. The distribution of E clus / p trk for the topocluster with at least 90% of the true energy from the particle matched to the track – the “correct” one to match to – and for the closest other topo-cluster in R  is shown in Fig. 11. For very soft particles, it is common that the closest other topocluster carries E clus / p trk comparable to (although smaller than) the correct topo-cluster. About 10% of incorrect topoclusters are rejected by the E clus / p trk cut for particles with 1 < pT < 2 GeV. The difference in E clus / p trk becomes much more pronounced for particles with pT > 5 GeV, for which there is a very clear separation between the cor- 123 466 Page 12 of 47 Eur. Phys. J. C (2017) 77:466 (a) (b) (c) (d) (e) (f) Fig. 10 The distribution of ση and σφ , for charged pions, in three different regions of the detector for three particle pT ranges. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band rect and incorrect topo-cluster matches, resulting in a 30– 40% rejection rate for the incorrect topo-clusters. This is because at lower pT clusters come from both signal and electronic or pile-up noise. Furthermore, the particle pT spectrum is peaked towards lower values, and thus higher- pT topo-clusters are rarer. The E clus / p trk > 0.1 requirement rejects the correct cluster for far less than 1% of particles. Next, an attempt is made to match the track to one of the preselected topo-clusters using the distance metric R  defined in Eq. 5. The distribution of R  between the track and the topo-cluster with > 90% of the truth particle energy and to the closest other preselected topo-cluster is shown in Fig. 12 for the dijet MC sample. From this figure, it is seen that the correct topo-cluster almost always lies at a small R  relative to other clusters. Hence, the closest preselected topo-cluster in R  is taken to be the matched topocluster. This criterion selects the correct topo-cluster with a high probability, succeeding for virtually all particles with pT > 5 GeV. If no preselected topo-cluster is found in a cone of size R  = 1.64, it is assumed that this particle did not form a topo-cluster in the calorimeter. In such cases the track is retained in the list of tracks and no subtraction is performed. The numerical value corresponds to a one-sided Gaussian confidence interval of 95%, and has not been optimised. However, as seen in Fig. 12, this cone size almost always includes the correct topo-cluster, while rejecting the bulk of incorrect clusters. 123 6.4 Evaluation of the expected deposited particle energy clus / p trk  determination through E ref ref It is necessary to know how much energy a particle with measured momentum p trk deposits on average, given by clus / p trk , in order to correctly subtract E dep  = p trk E ref ref the energy from the calorimeter for a particle whose track clus / p trk  has been reconstructed. The expectation value E ref ref (which is also a measure of the mean response) is determined using single-particle samples without pile-up by summing the energies of topo-clusters in a R cone of size 0.4 around the track position, extrapolated to the second layer of the EM calorimeter. This cone size is large enough to entirely capture the energy of the majority of particle showers. This is also sufficient in dijet events, as demonstrated in Fig. 13, where one might expect the clusters to be broader due to the presence of other particles. The subscript ‘ref’ is used here and in the following to indicate E clus / p trk values determined from single-pion samples. clus / p trk  due to detector geometry and Variations in E ref ref shower development are captured by binning the measurement in the pT and η of the track as well as the layer of Eur. Phys. J. C (2017) 77:466 Page 13 of 47 466 (a) (b) (c) (d) (e) (f) Fig. 11 The distributions of E clus / p trk for the topo-cluster with > 90% of the true energy of the particle and the closest other topo-cluster in R  . The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number highest energy density (LHED), defined in the next section. The LHED is also used to determine the order in which cells are subtracted in subsequent stages of the algorithm. The spread of the expected energy deposition, denoted by σ (E dep ), is determined from the standard deviation of the clus / p trk distribution in single-pion samples. It is used in E ref ref order to quantify the consistency of the measured E clus / p trk clus / p trk  in both the splitwith the expectation from E ref ref shower recovery (Sect. 6.5) and remnant removal (Sect. 6.7). 6.4.1 Layer of highest energy density The dense electromagnetic shower core has a well-defined ellipsoidal shape in η–φ. It is therefore desirable to locate this core, such that the energy subtraction may be performed first in this region before progressing to the less regular shower periphery. The LHED is taken to be the layer which shows the largest rate of increase in energy density, as a function of the number of interaction lengths from the front face of the calorimeter. This is determined as follows: • The energy density is calculated for the jth cell in the ith layer of the calorimeter as of MC simulated events are shown as a hatched band. A track is only used for energy subtraction if a topo-cluster is found inside a cone of R  = 1.64 for which E clus / p trk > 0.1, as indicated by the vertical dashed line ρi j =  Ei j  GeV/ X 03 , Vi j (6) with E i j being the energy in and Vi j the volume of the cell expressed in radiation lengths. The energy measured in the Presampler is added to that of the first layer in the EM calorimeter. In addition, the Tile and HEC calorimeters are treated as single layers. Thus, the procedure takes into account four layers – three in the EM calorimeter and one in the hadronic calorimeter. Only cells in the topo-clusters matched to the track under consideration are used. • Cells are then weighted based on their proximity to the extrapolated track position in the layer, favouring cells that are closer to the track and hence more likely to contain energy from the selected particle. The weight for each cell, wi j , is computed from the integral over the cell area in η–φ of a Gaussian distribution centred on the extrapolated track position with a width in R of 0.035, similar to the Molière radius of the LAr calorimeter. • A weighted average energy density for each layer is calculated as 123 466 Page 14 of 47 Eur. Phys. J. C (2017) 77:466 (a) (b) (c) (d) (e) (f) Fig. 12 The distributions of R  for the topo-cluster with > 90% of the true energy of the particle and the closest other topo-cluster, both satisfying E clus / p trk > 0.1. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncer- (a) (b) (c) Fig. 13 The cone size R around the extrapolated track required to encompass both the leading and sub-leading topo-clusters, for π ± when < 70% of their true deposited energy in topo-clusters is contained in the leading topo-cluster, but > 90% of the energy is contained in the two ρ  i = wi j ρi j . (7) j • Finally, the rate of increase in ρ  i in each layer is determined. Taking di to be the depth of layer i in interaction lengths, the rate of increase is defined as 123 tainties on the number of MC simulated events are shown as a hatched band. A track is only used for energy subtraction if a topo-cluster is found with E clus / p trk > 0.1 inside a cone of R  < 1.64, as indicated by the vertical dashed line leading topo-clusters. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band ρi = ρ  i − ρ  i−1 , di − di−1 (8) where the values ρ  0 = 0 and d0 = 0 are assigned, and the first calorimeter layer has the index i = 1. The layer for which ρ  is maximal is identified as the LHED. Eur. Phys. J. C (2017) 77:466 Page 15 of 47 466 (a) (b) (c) (d) (e) (f) Fig. 14 The significance of the difference between the energy of the matched topo-cluster and the expected deposited energy E dep  and that of the matched topo-cluster, for π ± when < 70% and > 90% of the true deposited energy in topo-clusters is contained in the matched topo-cluster for different pTtrue and |ηtrue | ranges. The vertical line indicates the value below which additional topo-clusters are matched to the track for cell subtraction. Subfigures a–f indicate that a single cluster is clus considered (93, 95, 95, 94, 95, 91) % of the time when εmatched > 90%; while additional topo-clusters are considered (49, 39, 46, 56, 52, 60) % clus of the time when εmatched < 70%. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band 6.5 Recovering split showers and those with εiclus < 70%. A clear difference is observed between the S(E clus ) distributions for the two categories, demonstrating the separation between showers that are and are not contained in a single cluster. More than 90% of clusters with εiclus > 90% have S(E clus ) > −1. Based on this observation a split shower recovery procedure is run if S(E clus ) < −1: topo-clusters within a cone of R = 0.2 around the track position extrapolated to the second EM calorimeter layer are considered to be matched to the track. As can be seen in the figure, the split shower recovery proceclus < 70%. dure is typically run 50% of the time when εmatched The full set of matched clusters is then considered when the energy is subtracted from the calorimeter. Particles do not always deposit all their energy in a single topo-cluster, as seen in Fig. 5. Clearly, handling the multiple topo-cluster case is crucial, particularly the two topo-cluster case, which is very common. The next stages of the algorithm are therefore firstly to determine if the shower is split across several clusters, and then to add further clusters for consideration when this is the case. The discriminant used to distinguish the single and multiple topo-cluster cases is the significance of the difference between the expected energy and that of the matched topocluster (defined using the algorithm in Sect. 6.3), S(E clus ) = E clus − E dep  . σ (E dep ) (9) The distribution of S(E clus ) is shown in Fig. 14 for two categories of matched topo-clusters: those with εiclus > 90% 6.6 Cell-by-cell subtraction Once a set of topo-clusters corresponding to the track has been selected, the subtraction step is executed. If E dep  exceeds the total energy of the set of matched topo-clusters, 123 466 Page 16 of 47 Eur. Phys. J. C (2017) 77:466 π π π π π π π π π π π π (a) (b) (c) (d) π π π π π π π π π (e) (f) (g) Fig. 15 An idealised example of how the cell-by-cell subtraction works. Cells in two adjacent calorimeter layers (EMB2 and EMB3) are shown in grey if they are not in clusters, red if they belong to a π + cluster and in green if contributed by a π 0 meson. Rings are placed around the extrapolated track (represented by a star) and then the cells in these are removed ring by ring starting with the centre of the shower (a), where the expected energy density is highest and moving outwards, and between layers. This sequence of ring subtraction is shown in subfigures (a) through (g). The final ring contains more energy than the expected energy, hence this is only partially subtracted (g), indicated by a lighter shading then the topo-clusters are simply removed. Otherwise, subtraction is performed cell by cell. Starting from the extrapolated track position in the LHED, a parameterised shower shape is used to map out the most likely energy density profile in each layer. This profile is determined from a single π ± MC sample and is dependent on the track momentum and pseudorapidity, as well as on the LHED for the set of considered topo-clusters. Rings are formed in η–φ space around the extrapolated track. The rings are just wide enough to always contain at least one calorimeter cell, independently of the extrapolated position, and are confined to a single calorimeter layer. Rings within a single layer are equally spaced in radius. The average energy density in each ring is then computed, and the rings are ranked in descending order of energy density, irrespective of which layer each ring is in. Subtraction starts from the ring with the highest energy density (the innermost ring of the LHED) and proceeds successively to the lower-density rings. If the energy in the cells in the current ring is less than the remaining energy required to reach E dep , these cells are simply removed and the energy still to be subtracted is reduced by the total energy of the ring. If instead the ring has more energy than is still to be removed, each cell in the ring is scaled down in energy by the fraction needed to reach the expected energy from the particle, then the process halts. Figure 15 shows a cartoon of how this subtraction works, removing cells in different rings from different layers until the expected energy deposit is reached. 123 6.7 Remnant removal If the energy remaining in the set of cells and/or topo-clusters that survive the energy subtraction is consistent with the clus / p trk distribution, specifically if this energy width of the E ref ref is less than 1.5σ (E dep ), it is assumed that the topo-cluster system was produced by a single particle. The remnant energy Eur. Phys. J. C (2017) 77:466 Page 17 of 47 466 (a) (b) (c) (d) (e) (f) Fig. 16 The significance of the difference between the energy of the matched topo-cluster and the expected deposited energy E dep  for π ± with either < 70% or > 90% of the total true energy in the matched topo-cluster originating from the π ± for different pTtrue and |ηtrue | ranges. The vertical line indicates the value below which the remnant topo-cluster is removed, as it is assumed that in this case no other particles contribute to the topo-cluster. Subfigures a–f indi- clus > 90% the remnant is successfully removed cate that when ρmatched clus (91, 89, 94, 89, 91, 88) % of the time; while when ρmatched < 70% the remnant is retained (81, 80, 76, 84, 83, 91) % of the time. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band therefore originates purely from shower fluctuations and so the energy in the remaining cells is removed. Conversely, if the remaining energy is above this threshold, the remnant topo-cluster(s) are retained – it being likely that multiple particles deposited energy in the vicinity. Figure 16 shows how this criterion is able to separate cases where the matched topocluster has true deposited energy only from a single particle from those where there are multiple contributing particles. After this final step, the set of selected tracks and the remaining topo-clusters in the calorimeter together should ideally represent the reconstructed event with no double counting of energy between the subdetectors. level available in Monte Carlo generated events. For these studies a dijet sample with leading truth jet pT between 20 and 500 GeV without pile-up is used. 7 Performance of the subtraction algorithm at truth level The performance of each step of the particle flow algorithm is evaluated exploiting the detailed energy information at truth 7.1 Track–cluster matching performance Initially, the algorithm attempts to match the track to a single topo-cluster containing the full particle energy. Figure 17 shows the fraction of tracks whose matched cluster clus > 90% or ε clus > 50%. When almost all of the has εlead lead deposited energy is contained within a single topo-cluster, the probability to match a track to this topo-cluster (matching probability) is above 90% in all η regions, for particles with pT > 2 GeV. The matching probability falls to between 70 and 90% when up to half the particle’s energy is permitted to fall in other topo-clusters. Due to changes in the calorimeter geometry, the splitting rate and hence the matching probability vary significantly for particles in different pseudorapidity regions. In particular, the larger cell size at higher |η| 123 466 Page 18 of 47 Eur. Phys. J. C (2017) 77:466 (a) (b) Fig. 17 The probability to match the track to the leading topo-cluster clus > 90% and (b) when ε clus > 50%. The data are taken (a) when εlead lead (a) (b) from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band (c) Fig. 18 The fraction of the true energy of a given particle contained within the initially matched topo-cluster for particles where the split shower recovery procedure is run (SSR run) and where it is not (No SSR). For cases where most of the energy is contained in the initially matched topo-cluster the procedure is less likely to be run. The data are taken from a dijet sample without pile-up with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band enhances the likelihood of capturing soft particle showers in a single topo-cluster, as seen in Figs. 4 and 5, which results in the matching efficiency increasing at low pT for |η| > 2. Sect. 6.5. In the cases where the split shower recovery proclus is found to be high, confirming cedure is not run, εmatched clus / p trk  that the comparison of topo-cluster energy and E ref ref is successfully identifying good topo-cluster matches. Conversely, the split shower recovery procedure is activated when clus is low, particularly for higher- pT particles, which are εmatched expected to split their energy between multiple topo-clusters more often. Furthermore, as the particle pT rises, the width of the calorimeter response distribution decreases, making it easier to distinguish the different cases. clus of the true deposited Figure 19 shows the fraction f sub energy of the pions considered for subtraction, in the set of clusters matched to the track, as a function of true pT . For particles with pT > 20 GeV, with split shower recovery clus is greater than 90% on average. The subtraction active, f sub algorithm misses more energy for softer showers, which are 7.2 Split-shower recovery performance Frequently, a particle’s energy is not completely contained within the single best-match topo-cluster, in which case the split shower recovery procedure is applied. The effectiveness of the recovery can be judged based on whether the procedure is correctly triggered, and on the extent to which the energy subtraction is improved by its execution. clus of the true deposited Figure 18 shows the fraction εmatched energy contained within the matched topo-cluster, separately for cases where the split shower recovery procedure is and is not triggered, as determined by the criteria described in 123 f clus sub Eur. Phys. J. C (2017) 77:466 Page 19 of 47 466 1 0 0 ( pT,post−sub ). The corresponding transverse tion as pT,pre−sub 0.95 ± / pT momentum fractions are defined as f ± = pT,pre−sub 0.9 0 ( f 0 = pT,pre−sub / pT ). Three measures are established, to quantify the degree to which the energy is incorrectly subtracted. The incorrectly subtracted fractions for the two classes of particles are: jet,true jet,true 0.85 0.8 0.75 ± 0.7 0.65 0.6 ATLAS Simulation s = 8 TeV 5 10 15 R = 0.0<|ηtrue|<1.0 1.0<|ηtrue|<2.0 2.0<|ηtrue|<2.5 20 25 30 35 ± pT,post−sub (10) jet,true pT and 40 ptrue [GeV] T Fig. 19 The fraction of the true energy of a given particle considered clus after the inclusion of the split shower in the subtraction procedure f sub recovery algorithm. The data are taken from a dijet sample without pileup with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown as a hatched band clus could be increased harder to capture completely. While f sub by simply attempting recovery more frequently, expanding the topo-cluster matching procedure in this fashion increases the risk of incorrectly subtracting neutral energy; hence the split shower recovery procedure cannot be applied indiscriminately. The settings used in the studies presented in this paper are a reasonable compromise between these two cases. 7.3 Accuracy of cell subtraction The cell subtraction procedure removes the expected calorimeter energy contribution based on the track properties. It is instructive to identify the energy that is incorrectly subtracted from the calorimeter, to properly understand and optimise the performance of the algorithm. Truth particles are assigned reconstructed energy in topoclusters as described in Sect. 3.2, and then classified depending on whether or not a track was reconstructed for the particle. The reconstructed energy assigned to each particle is computed both before subtraction and after the subtraction has been performed, using the remaining cells. In the ideal case, the subtraction should remove all the energy in the calorimeter assigned to stable truth particles which have reconstructed tracks, and should not remove any energy assigned to other particles. The total transverse momentum of clusters associated with particles in a truth jet where a track was reconstructed before (after) subtrac± ± ( pT,post−sub ). Similarly, the transtion is defined as pT,pre−sub verse momentum of clusters associated with the other particles in a truth jet, neutral particles and those that did not create selected, reconstructed tracks, before (after) subtrac- R = 0 0 0 − pT,post−sub pT,pre−sub jet,true pT , (11) such that R ± corresponds to the fraction of surviving momentum associated with particles where the track measurement is used, which should have been removed, while R 0 gives the fraction of momentum removed that should have been retained as it is associated with particles where the calorimeter measurement is being used. These two variables are combined into the confusion term C = R± − R0, (12) which is equivalent to the net effect of both mistakes on the final jet transverse momentum, as there is a potential cancellation between the two effects. An ideal subtraction algorithm would give zero for all three quantities. Figure 20 shows the fractions associated with the different classes of particle, before and after the subtraction algorithm has been executed for jets with a true energy in the range 40– 60 GeV. The confusion term is also shown, multiplied by the jet energy scale factor that would be applied to these reconstructed jets, such that its magnitude (C × JES) is directly comparable to the reconstructed jet resolution. Clearly, the subtraction does not perform perfectly, but most of the correct energy is removed – the mean value of the confusion is −1%, with an RMS of 7.6%. The slight bias towards negative values suggests that the subtraction algorithm is more likely to remove additional neutral energy rather than to miss charged energy and the RMS gives an indication of the contribution from this confusion to the overall jet resolution. Figure 21 shows C × JES as a function of pT . The mean value of the JES weighted confusion remains close to zero and always within ±1.5%, showing that on average the algorithm removes the correct amount of energy from the calorimeter. The RMS decreases with increasing pT . This is due to a combination of the particle pT spectrum becoming harder, such that the efficiency of matching to the correct cluster increases; the increasing difficulty 123 Before Sub. After Sub. ATLAS Simulation 0.12 jet,true 40π-0.3 |ηjet |<1.0 1 0.95 0.8 0.9 0.85 0.7 0.8 0.6 Anti-k R=0.4 t Particle Flow Jets -1.5 -1 -0.5 0 0.5 1 1.5 2 Jet η Fig. 24 The response E reco /E true of anti-kt particle flow jets with radius parameter 0.4 from MC dijet samples with no pile-up, as a function of the jet η, measured prior to calibration, and binned in the energy of the matched truth jet 8.4 Global sequential correction The numerical inversion calibration restores the average reconstructed jet energy to the mean value of the truth jet energy, accounting for variations in the jet response due to the jet energy and pseudorapidity. However, other jet characteristics such as the flavour of the originating parton and the composition of the hadrons created in jet fragmentation may cause further differences in the response. A global sequential correction [4] that makes use of additional observables adapts the jet energy calibration to account for such variations, thereby improving the jet resolution without changing the scale. The variables used for particle flow jets are not the same as those used for calorimeter jets, as tracks have already been used in the calculation of the energy of the jet constituents. As the name implies, the corrections corresponding to each variable are applied consecutively. Three variables are used as inputs to the correction: 1. the fraction of the jet energy measured from constituent tracks (charged fraction), i.e. those tracks associated to the jet; 2. the fraction of jet energy measured in the third EM calorimeter layer; 3. the fraction of jet energy measured in the first Tile calorimeter layer. The first of these variables allows the degree of undercalibrated signal, due to the lower energy deposit of hadrons in the hadronic calorimeter, to be determined. The calorimeterlayer energy fractions allow corrections to be made for the energy lost in dead material between the LAr and Tile calorimeters. 1.04 Data/MC -2 0.75 1.02 1 0.98 0.96 50 100 150 200 250 300 350 pZ [GeV] T Fig. 25 The mean value of the ratio of the transverse momentum of a jet to that of the reconstructed Z boson decaying to μμ. The uncertainties shown are statistical 8.5 In situ validation of JES A full in situ calibration and evaluation of the uncertainties on the JES [64] is not performed for these studies. However, to confirm that the ATLAS MC simulation describes the particle flow jet characteristics well enough to reproduce the jet energy scale in data, similar methods are used to validate the jet calibration. A sample of Z → μμ events with a jet balancing the Z boson is used for the validation. A preselection is made using the criteria described in Sect. 4. The particle flow algorithm is run on these events and further requirements, discussed below, are applied. The jet with the highest pT (j1) and the reconstructed Z boson are required to be well separated in azimuthal angle, φ > π − 0.3. Events with j2 any additional jet within |η| < 4.5, with pT > 20 GeV or j2 j1 pT > 0.1 pT , are vetoed, where j2 denotes the jet with the second highest pT . In Fig. 25, the mean value of the ratio of the transverse momentum of the jet to that of the Z boson is shown for data and MC simulation for jets with |η| < 1. The mean value is determined using a Gaussian fit to the distribution in bins of the Z -boson pT . The double-ratio of data to MC simulation is also shown. The simulation reproduces the data to within 2%, and in general is consistent with the data points within statistical uncertainties. At high pT the data/MC ratio is expected to tend towards that of the calorimeter jets [6,7], as a large fraction of the jet’s energy is carried by particles above the cut made on the track momentum. For pT > 200 GeV it is observed that the jet energy scale of calorimeter jets in data is typically 0.5% below that in simulation. 123 Simulation LC+JES Jets (〈 μ〉 ~24) 0.3 Particle Flow Jets (〈 μ〉~24) 0.25 0.2 sgn(σi-σj ) σ2i -σ2j σR/R ATLAS Eur. Phys. J. C (2017) 77:466 ATLAS 0.15 0.1 0.1 0.05 0.05 20 30 40 102 2×102 10 p [GeV] T 20 30 40 102 2×102 LC+JES Jets (〈 μ〉~24) Particle Flow Jets (〈μ〉 ~24) 0.2 |η| < 1.0 0.15 0.15 0.1 0.05 0 -0.05 Simulation 0.3 0.25 3 10 p [GeV] sgn(σi-σj ) σ2i -σ2j σR/R 466 Page 24 of 47 40 < p < 60 GeV T 0.15 0.1 0.05 0 -0.05 0 p [GeV] T 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 |η| T (a) (b) Fig. 26 The jet transverse momentum resolution as determined in dijet MC events for calorimeter jets and particle flow jets. Subfigure (a) shows the resolution as a function of pT for jets with |η| < 1.0 and (b) shows the resolution as a function of |η| for jets with 40 < pT < 60 GeV. Simulated pile-up conditions are similar to the data-taking in 2012. To quantify the difference in resolution between particle flow and calorimeter jets, the lower figure shows the square root of the difference of the squares of the resolution for the two classes of jets 9 Resolution of jets in Monte Carlo simulation the close proximity of the showers within the jet increases the degree of confusion during the cell subtraction stage. To counteract this, the track pT used for particle flow reconstruction is required to be < 40 GeV for the 2012 data. Alternative solutions, such as smoothly disabling the algorithm for individual tracks as the particle environment becomes more dense, are expected to restore the particle flow jet performance to match that of the calorimeter jets at high energies. The benefits of particle flow also diminish toward the more forward regions as the cell granularity decreases, as shown in Fig. 26b. In Fig. 27, the underlying distributions of the ratio of reconstructed to true pT are shown for two different jet pT bins. This demonstrates that the particle flow algorithm does not introduce significant tails in the response at either low or high pT . The low-side tail visible in Fig. 27b is present in both calorimeter and particle flow jets and is caused by dead material and inactive detector regions. The largest expected benefit from using the particle flow reconstruction as input to jet-finding is an improvement of the jet energy and angular resolution for low- pT jets. In this section, the jet resolution achieved with particle flow methods is compared with that attained using standard calorimeter jet reconstruction. 9.1 Transverse momentum resolution In Fig. 26, the relative jet transverse momentum resolution for particle flow and calorimeter jets is shown as a function of jet transverse momentum for jets in the pseudorapidity range |η| < 1.0, and as a function of |η| for jets with 40 < pT < 60 GeV. Particle flow jets are calibrated using the procedures described in Sect. 8, while calorimeter jets use the more detailed procedure described in Refs. [4–7]. The particle flow jets perform better than calorimeter jets at transverse momenta of up to 90 GeV in the central region, benefiting from the improved scale for low- pT hadrons and intrinsic pile-up suppression (elaborated on in Sect. 10). However, at high transverse momenta, the particle flow reconstruction performs slightly worse than the standard reconstruction. This is due to two effects. The dense core of a jet poses a challenge to tracking algorithms, causing the tracking efficiency and accuracy to degrade in high- pT jets. Furthermore, 123 9.2 Angular resolution of jets Besides improving the pT resolution of jets, the particle flow algorithm is expected to improve the angular (η, φ) resolution of jets. This is due to three different effects. Firstly, usage of tracks to measure charged particles results in a much better angular resolution for individual particles than that obtained using topo-clusters, because the tracker’s angular resolution Page 25 of 47 466 1 ATLAS Simulation Fraction of jets Fraction of jets Eur. Phys. J. C (2017) 77:466 Particle Flow Jets (〈 μ〉~24) LC+JES Jets (〈 μ〉~24) -1 10 40 < pT < 50 GeV |η| < 1.0 10-2 0.2 1 10-1 Particle Flow Jets ( 〈μ〉~24) LC+JES Jets (〈 μ〉~24) 120 < pT < 130 GeV |η| < 1.0 10-2 10-3 10-4 ATLAS Simulation 10-3 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 10-4 0.2 0.4 0.6 0.8 1 preco./ptrue T T 1.2 1.4 1.6 1.8 preco./ptrue T T (a) (b) 0.07 -φ true ) 0.06 0.08 reco. σ (η LC+JES Jets Particle Flow Jets <μ>~ 24 |η| < 1.0 ATLAS Simulation σ (φ true 0.07 -η 0.08 reco. ) Fig. 27 The jet transverse momentum response distribution as determined in dijet MC events for calorimeter jets and particle flow jets. Two different pT bins are shown; a 40 < pT < 50 GeV and b 120 < pT < 130 GeV. Simulated pile-up conditions are similar to the data-taking in 2012 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.02 0.01 0.01 102 (a) 3 10 p [GeV] T LC+JES Jets Particle Flow Jets <μ>~ 24 |η| < 1.0 ATLAS Simulation 102 (b) 3 10 p [GeV] T Fig. 28 The angular resolution, a in η and b in φ, as a function of the jet pT , determined in dijet MC simulation by fitting Gaussian functions to the difference between the reconstructed and truth quantities. Conditions are similar to the data-taking in 2012 is far superior to that of the calorimeter. Secondly, the track four-momentum can be determined at the perigee, before the charged particles have been spread out by the magnetic field, thereby improving the φ resolution for the jet. Thirdly, the suppression of charged pile-up particles should also reduce mismeasurements of the jet direction. Figure 28 shows the angular resolution in η and φ as a function of the reconstructed jet transverse momentum for particle flow and calorimeter jets. It is determined from the standard deviation of a Gaussian fit over ±1.5σ to the difference between the η and φ values for the reconstructed and matched truth (R < 0.3) jets in the central region. At low pT , where the three effects described above are expected to be more important, significant improvements are seen in both the η and φ resolutions. It is interesting to note that for par- ticle flow jets the η and φ resolutions are similar, while for calorimeter jets the φ resolution is worse due to the aforementioned effect of the magnetic field on charged particles. 10 Effect of pile-up on the jet resolution and rejection of pile-up jets At the design luminosity of the LHC, and even in 2012 data-taking conditions, in- and out-of-time pile-up contribute significantly to the signals measured in the ATLAS detector, increasing the fluctuations in jet energy measurements. The pile-up suppression inherent in the particle flow reconstruction and the calibration of charged particles through the use of tracks significantly mitigates the degradation 123 10-1 Eur. Phys. J. C (2017) 77:466 Reconstruction Efficiency 〈 Fake Jets / 0.2 / Event 〉 466 Page 26 of 47 LC+JES Jets LC+JES Jets |JVF|>0.25 Particle Flow Jets 〈μ〉 ~ 24 s = 8 TeV 1.03 pT > 20 GeV ATLAS Simulation 10-2 1.02 LC+JES Jets LC+JES Jets |JVF|>0.25 Particle Flow Jets 〈μ〉 ~ 24 s = 8 TeV |η|<1.0 ATLAS Simulation 1.01 1 0.99 0.98 10-3 0.97 -4 -3 -2 -1 0 1 2 3 4 η (a) 30 35 40 45 50 55 60 65 70 75 80 ptrue [GeV] T (b) Fig. 29 In the presence of pile-up, ‘fake jets’ can arise from particles not produced in the hard-scatter interaction. Subfigure a shows the number of fake jets (jets not matched to truth jets with pT > 4 GeV within R < 0.4) and b the efficiency of reconstructing a hard-scatter jet (reconstructed jet found within R < 0.4 with pT > 15 GeV) in dijet MC events. Simulated pile-up conditions are similar to the data-taking in 2012 of jet resolution from pile-up and eliminates jets reconstructed from pile-up deposits, making the particle flow method a powerful tool, especially as the LHC luminosity increases. For |η| > 2.5, the jets are virtually identical, and hence the fake rate shows no differences. This rejection rate is comparable to that achieved using the JVF discriminant, which can likewise only be applied within the tracker coverage. Here, the comparison is made to a |JVF| threshold of 0.25 for calorimeter jets, which is not as powerful as the particle flow fake-jet rate reduction. The inefficiency of the particle flow jet-finding is negligible, as can be seen from Fig. 29b. In contrast, the inefficiency generated by requiring |JVF| > 0.25 is clearly visible (it should be noted that in 2012 JVF cuts were only applied to calorimeter jets up to a pT of 50 GeV). Below 30 GeV, the jet resolution causes some reconstructed jets to fall below the jet reconstruction energy threshold so these values are not shown. A more detailed study of the pile-up jet rates is carried out in a Z → μμ sample, both in data and MC simulation, by isolating several phase-space regions that are enriched in hard-scatter or pile-up jets. A preselection is made using the criteria described in Sect. 4. The particle flow algorithm is run on these events and further requirements are applied: events are selected with two isolated muons, each with pT > 25 GeV, with invariant mass 80 < m μμ < 100 GeV μμ and pT > 32 GeV, ensuring that the boson recoils against hadronic activity. Figure 30 displays two regions of phase space: one opposite the recoiling boson, where large amounts of hard-scatter jet activity are expected, and one off-axis, which is more sensitive to pile-up jet activity. Figure 31 shows the average number of jets with pT > 20 GeV in the hard-scatter-enriched region for different |η| ranges as a function of the number of primary vertices. The 10.1 Pile-up jet rate In the presence of pile-up, jets can arise from particles not produced in the hard-scatter interaction. These jets are here referred to as ‘fake jets’. Figure 29a shows the fake-jet rate as a function of the jet η for particle flow jets compared to calorimeter jets with and without track-based pileup suppression [65]. These rates are evaluated using a dijet MC sample overlaid with simulated minimum-bias events approximating the data-taking conditions in 2012. The jet vertex fraction (JVF) is defined as the ratio of two scalar sums of track momenta: the numerator is the scalar sum of the pT of tracks that originate from the hard-scatter primary vertex and are associated with the jet; the denominator is the scalar sum of the transverse momenta of all tracks associated with that jet.4 Within the tracker coverage of |η| < 2.5, the fake rate for particle flow jets drops by an order of magnitude compared to the standard calorimeter jets. The small increase in the rate of particle flow fake jets around 1.0 < |η| < 1.2 is related to the worse performance of the particle flow algorithm in the transition region between the barrel and extended barrel of the Tile calorimeter, which is significantly affected by pile-up contributions [3]. 4 Jets with no tracks associated with them are assigned JVF = −1. 123 Eur. Phys. J. C (2017) 77:466 Page 27 of 47 466 2.0 < |η| < 2.5 region, where in Fig. 29 a slight increase in the jet fake rate is visible for jet pseudorapidities very close to the tracker boundary. This is due to the jet area collecting charged-particle pile-up contributions that are outside the ID acceptance. If the JVF cut is not applied to the calorimeter jets, the jet multiplicity grows with increasing pile-up. Figure 32 shows that in the pile-up-enriched selection, the particle flow and calorimeter jets with a JVF selection still show no dependence on the number of reconstructed vertices in all |η| regions. The observed difference between data and MC simulation for both jet collections is due to a poor modelling of this region of phase space. These distributions establish the high stability of particle flow jets in varying pile-up conditions. distributions are stable for particle flow jets and for calorimeter jets with |JVF| > 0.25 as a function the number of primary vertices in all |η| regions. The only exception is in the 10.2 Pile-up effects on jet energy resolution ATLAS s = 8 TeV, 20.2 fb-1 LC+JES Jets Data LC+JES Jets MC LC+JES Jets Data |JVF|>0.25 LC+JES Jets MC |JVF|>0.25 Particle Flow Data Particle Flow MC Hard scatter selection |η|<1.0 0.6 0.5 0.48 0.46 In addition to simply suppressing jets from pile-up, the particle flow procedure reduces the fluctuations in the jet energy ATLAS s = 8 TeV, 20.2 fb-1 LC+JES Jets Data LC+JES Jets MC LC+JES Jets Data |JVF|>0.25 LC+JES Jets MC |JVF|>0.25 Particle Flow Data Particle Flow MC Hard scatter selection 1.0<|η|<2.0 0.44 0.42 0.55 〈 No. of Jets 〉 0.65 〈 No. of Jets 〉 〈 No. of Jets 〉 Fig. 30 A diagram displaying the regions of r –φ phase space which are expected to be dominated by hard-scatter jets (opposite in the r –φ plane to the Z → μμ decay) and where there is greater sensitivity to pile-up jet activity (perpendicular to the Z → μμ decay) 0.13 ATLAS s = 8 TeV, 20.2 fb-1 LC+JES Jets Data LC+JES Jets MC LC+JES Jets Data |JVF|>0.25 LC+JES Jets MC |JVF|>0.25 Particle Flow Data Particle Flow MC Hard scatter selection 2.0<|η|<2.5 0.12 0.4 0.11 0.38 0.5 0.14 0.36 0.1 0.34 0.45 0.32 10 12 14 16 18 20 0.09 8 10 12 Number of Primary Vertices ATLAS s = 8 TeV, 20.2 fb-1 LC+JES Jets Data LC+JES Jets MC LC+JES Jets Data |JVF|>0.25 LC+JES Jets MC |JVF|>0.25 Particle Flow Data Particle Flow MC Pile-up selection |η|<1.0 0.3 〈 No. of Jets 〉 〈 No. of Jets 〉 18 20 8 12 0.4 0.35 0.3 14 16 18 20 (c) ATLAS cut on JVF. The jets are selected in a region of φ opposite the Z boson’s direction, φ(Z , jet) > 3π/4, which is enriched in hard-scatter jets. The statistical uncertainties in the number of events are shown as a hatched band s = 8 TeV, 20.2 fb-1 LC+JES Jets Data LC+JES Jets MC LC+JES Jets Data |JVF|>0.25 LC+JES Jets MC |JVF|>0.25 Particle Flow Data Particle Flow MC Pile-up selection 1.0<|η|<2.0 0.25 0.1 0.09 ATLAS s = 8 TeV, 20.2 fb-1 LC+JES Jets Data LC+JES Jets MC LC+JES Jets Data |JVF|>0.25 LC+JES Jets MC |JVF|>0.25 Particle Flow Data Particle Flow MC Pile-up selection 2.0<|η|<2.5 0.08 0.07 0.06 0.2 0.2 10 Number of Primary Vertices (b) Fig. 31 The average number of jets per event, for jets with pT > 20 GeV, as a function of the number of primary vertices in the Z → μμ samples. The distributions are shown in three different |η| regions for particle flow jets, calorimeter jets and calorimeter jets with an additional 0.4 16 Number of Primary Vertices (a) 0.5 14 〈 No. of Jets 〉 8 0.05 0.15 0.04 0.1 0.1 0.03 0.05 8 10 12 14 16 18 20 0.02 8 10 12 Number of Primary Vertices (a) 14 16 18 20 8 10 Number of Primary Vertices (b) Fig. 32 The average number of jets per event, for jets with pT > 20 GeV, as a function of the number of primary vertices in the Z → μμ samples. The distributions are shown in three different |η| regions for particle flow jets, calorimeter jets and calorimeter jets with an additional 12 14 16 18 20 Number of Primary Vertices (c) cut on JVF. The jets are selected in a region of φ perpendicular to the Z boson’s direction, π/4 < φ(Z , jet) < 3π/4, which is enriched in pile-up jets. The statistical uncertainties in the number of events are shown as a hatched band 123 σR/R 466 Page 28 of 47 ATLAS Eur. Phys. J. C (2017) 77:466 Simulation ∼ 8% to the jet resolution in the absence of pile-up. Since the terms are combined in quadrature, confusion contributes significantly to the overall jet resolution, although it does not totally dominate. While additional confusion can be caused by the presence of pile-up particles, the net effect is that pileup affects the resolution of particle flow jets less than that of calorimeter jets. Particle Flow Jets (〈μ〉~24) Particle Flow Jets (μ=0) LC+JES Jets (〈μ〉~24) LC+JES Jets (μ=0) 0.3 0.25 0.2 |η| < 1.0 0.15 0.1 11 Comparison of data and Monte Carlo simulation sgn(σi-σj ) σ2i -σ2j 0.05 0.15 0.1 0.05 0 -0.05 20 30 40 102 2×102 Particle Flow 10 LC+JES pT [GeV] 20 30 40 102 2×102 10 p [GeV] 3 T Fig. 33 The resolutions of calorimeter and particle flow jets determined as a function of pT in MC dijet simulation, compared with no pile-up and conditions similar to those in the 2012 data. The quadratic difference in the resolution with and without pile-up is shown in the lower panel for LC + JES (blue) and particle flow (black) jets. The data are taken from dijet samples, with and without pileup, with 20 < pTlead < 500 GeV and the statistical uncertainties on the number of MC simulated events are shown measurements due to pile-up contributions. This is demonstrated by Fig. 33, which compares the jet energy resolution for particle flow and calorimeter jets with and without pileup. Even in the absence of pile-up, the particle flow jets have a better resolution at pT values below 50 GeV. With pile-up conditions similar to those in the 2012 data, the cross-over point is at pT = 90 GeV, indicating that particle flow reconstruction alleviates a significant contribution from pile-up even for fairly energetic jets. The direct effect of pile-up can be seen in the lower panel, where the difference in quadrature between the resolutions with and without pile-up is shown. The origin of the increase in the resolution with pile-up is discussed in detail in Ref. [6]. It is shown that additional energy deposits are the primary cause of the degradation of the calorimeter jet resolution. This effect is mitigated by the particle flow algorithm in two ways. Firstly, the subtraction of topo-clusters formed by charged particles from pileup vertices prior to jet-finding eliminates a major source of fluctuations. Secondly, the increase in the constituent scale of hard-scatter jets from the use of calibrated tracks, rather than energy clusters in the calorimeter, amplifies the signal, effectively suppressing the contribution from pile-up. This second mechanism is found to be the main contributing factor. For 40 GeV jets, the total jet resolution without pile-up is 10%. Referring back to Fig. 20c, confusion contributes 123 It is crucial that the quantities used by the particle flow reconstruction are accurately described by the ATLAS detector simulation. In this section, particle flow jet properties are compared for Z → μμ and t t¯ events in data and MC simulation. Various observables are validated, from low-level jet characteristics to derived observables relevant to physics analyses. 11.1 Individual jet properties A sample of jets is selected in Z → μμ events, as in Sect. 8, and used for a comparison between data and MC simulation. As the subtraction takes place at the cell level, the energy subtracted from each layer of the calorimeter demonstrates how well the subtraction procedure is modelled. To determine the energy before subtraction the particle flow jets are matched to jets formed solely from topo-clusters at the electromagnetic scale. A similar selection to that used to evaluate the jet energy scale is used. The leading jet is required to be opposite a reconstructed Z boson decaying to two muons with φ > π − 0.4. The pT of the reconstructed boson is required to be above 32 GeV and the reconstructed jets must have 40 < pT < 60 GeV. Figures 34 and 35 show the properties of central jets. The MC simulation describes the data reasonably well for the jet track multiplicity, fraction of the jet pT carried by tracks as well as the amount of subtracted or surviving energy in each layer of the EM barrel. Similar levels of agreement are observed for jets in the endcap regions of the detector. 11.2 Event-level observables Finally, the particle flow performance is examined in a sample of selected t t¯ events; a sample triggered by a single-muon trigger with a single offline reconstructed muon is used. At least four jets with pT > 25 GeV and |η| < 2.0 are required and two of these are required to have been b-tagged using the MV1 algorithm and have pT > 35 and 30 GeV.5 This selects 5 As the b-tagging algorithm has only been calibrated for calorimeter jets, the particle flow jets use the calorimeter jet information from the closest jet in R in order to decide if the jet is b-tagged. Eur. Phys. J. C (2017) 77:466 Page 29 of 47 466 (a) (b) (c) (d) Fig. 34 Comparison of jet track properties, for a selection of jets with 40 < pT < 60 GeV and |η| < 0.6, selected in Z → μμ events from collision data and MC simulation. The simulated samples are normalised to the number of events in data. The following distributions are shown: a the charged fraction, i.e. the fractional jet pT carried by reconstructed tracks; b the number of tracks in the jet that originate from the nominal hard-scatter primary vertex; c the transverse momentum of the leading track in the jet; d the transverse momenta of all tracks in the jet weighted by the track pT and normalised to the number of jets, illustrating the transverse momentum flow from particles of different pT . The distribution is shown both for tracks satisfying the hard-scatter primary vertex association criteria and forming the jet as well as the additional tracks within R = 0.4 of the jet failing to satisfy the hard-scatter primary vertex association criteria. The darker shaded bands represent the statistical uncertainties a 95% pure sample of t t¯ events. The event E Tmiss is reconstructed from the vector sum of the calibrated jets with pT > 20 GeV, the muon and all remaining tracks associated with the hard-scatter primary vertex but not associated with these objects. This is then used to form the transverse mass vari- each of the two b-tagged jets and these two non-b-tagged jets form two hadronic top quark candidates, m jjb . Figure 36 compares the data with MC simulation for these three variables; m T , m jj and m jjb . The MC simulation describes the data very well in all three distributions. Figure 37 shows the m jj distribution for particle flow jets compared to the distribution obtained from the same selection applied to calorimeter jets (with |JVF| > μ able defined by m T = 2 pT E Tmiss (1 − cos(φ(μ, E Tmiss ))). The invariant mass of the two leading non-b-tagged jets, m jj , forms a hadronic W candidate, while the invariant masses of 123 466 Page 30 of 47 Eur. Phys. J. C (2017) 77:466 (a) (b) (c) (d) (e) (f) Fig. 35 Comparison of the fractions of jet energy removed from a single layer of the electromagnetic calorimeter relative to the total energy constit. (left) and of the constituents of the matched calorimeter jet E Calo retained relative to the total energy of the constituents of the particle constit. (right) by the cell subtraction algorithm in different layflow jet E Pflow 123 ers of the EM barrel, for a selection of jets with 40 < pT < 60 GeV and |η| < 0.6, selected in Z → μμ events from collision data and MC simulation. The simulated samples are normalised to the number of events in data. The darker shaded bands represent the statistical uncertainties Page 31 of 47 466 ATLAS Particle Flow Data s = 8 TeV, 20.2 fb-1 Total SM prediction tt→ ql,ll Single Top 2000 60 < mjj < 100 GeV 1500 Events / 4 GeV 2500 2500 500 2 1.5 1 0.5 2 1.5 1 0.5 Data / MC 500 40 60 80 100 120 140 160 180 20 mT [GeV] (a) Data s = 8 TeV, 20.2 fb-1 Total SM prediction tt→ ql,ll Single Top mT > 45 GeV 1500 1000 20 ATLAS Particle Flow 2000 1000 Data / MC Events / 4 GeV Eur. Phys. J. C (2017) 77:466 40 60 80 100 120 140 160 180 mjj [GeV] Events / 4 GeV (b) 3500 ATLAS Particle Flow 3000 Data s = 8 TeV, 20.2 fb-1 Total SM prediction tt→ ql,ll Single Top 2500 60 < mjj < 100 GeV 2000 mT > 45 GeV 1500 1000 Data / MC 500 2 1.5 1 0.5 100 150 200 250 300 350 mjjb [GeV] (c) Fig. 36 Comparison of the distributions of mass variables computed with particle flow jets between collision data and the MC simulation for a t t¯ event selection. The darker shaded bands and the errors on the collision data show the statistical uncertainties 0.25). For the calorimeter jet selection, the E Tmiss is reconstructed from the muon, jets, photons and remaining unassociated clusters [53]. The two selections are applied separately; hence the exact numbers of events in the plots differ. The particle flow reconstruction provides a good measure and narrower width of the peak for both low and jj high pT . Gaussian fits to the data in the range 65 < m jj < 95 GeV give widths of (13.8 ± 0.4) GeV and (16.2 ± 0.6) GeV for particle flow reconstruction and jj that based on calorimeter jets, respectively, for pT < jj 80 GeV. For pT > 80 GeV, the widths were found to be (11.2 ± 0.2) GeV and (11.9 ± 0.3) GeV, respectively. At very high values of pTW , the gains would further diminish (see Fig. 26). 12 Conclusions The particle flow algorithm used by the ATLAS Collaboration for 20.2 fb−1 of pp collisions at 8 TeV at the LHC is presented. This algorithm aims to accurately subtract energy deposited by tracks in the calorimeter, exploiting the good calorimeter granularity and longitudinal segmentation. Use of particle flow leads to improved energy and angular resolution of jets compared to techniques that only use the calorimeter in the central region of the detector. In 2012 data-taking conditions, the transverse momentum resolution of particle flow jets calibrated with a global sequential correction is superior up to pT ∼ 90 GeV for |η| < 1.0. For a representative jet pTtrue of 30 GeV, the reso- 123 2400 ATLAS 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 20 40 Data, s = 8 TeV, 20.2 fb -1 Particle Flow Jets LC+JES Jets pjjT < 80 GeV 60 Events / 4 GeV Eur. Phys. J. C (2017) 77:466 Events / 4 GeV 466 Page 32 of 47 80 100 120 140 160 180 mjj [GeV] (a) 2400 ATLAS 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 20 40 Data, s = 8 TeV, 20.2 fb -1 Particle Flow Jets LC+JES Jets pjjT > 80 GeV 60 80 100 120 140 160 180 mjj [GeV] (b) Fig. 37 Comparison between the m jj distributions measured using particle flow jets and calorimeter jets with a JVF selection in data. The sample jj jj is split into those events where the reconstructed W candidate has pT < 80 GeV and pT > 80 GeV. The errors shown are purely statistical lution is improved from the 17.5% resolution of calorimeter jets with local cluster weighting calibration to 14%. Jet angular resolutions are improved across the entire pT spectrum, with σ (η) and σ (φ) decreasing from 0.03 to 0.02 and 0.05 to 0.02, respectively, for a jet pT of 30 GeV. Rejection of charged particles from pile-up interactions in jet reconstruction leads to substantially better jet resolution and to the suppression of jets due to pile-up interactions by an order of magnitude within the tracker acceptance, with negligible inefficiency for jets from the hard-scatter interaction. This outperforms a purely track-based jet pile-up discriminant typically used in ATLAS analyses, which achieves similar pile-up suppression at the cost of about one percent in hard-scatter jet efficiency. The algorithm therefore achieves a better performance for hadronic observables such as reconstructed resonant particle masses. Studies which compare data with MC simulation demonstrate that jet properties used for energy measurement and calibration are modelled well by the ATLAS simulation, both before and after application of the particle flow algorithm. This translates to good agreement between data and simulation for derived physics observables, such as invariant masses of combinations of jets. The algorithm has been integrated into the ATLAS software framework for Run 2 of the LHC. As demonstrated, it is robust against pile-up and should therefore perform well under the conditions encountered in Run 2. Acknowledgements We thank CERN for the very successful operation of the LHC, as well as the support staff from our institutions without whom ATLAS could not be operated efficiently. We acknowl- 123 edge the support of ANPCyT, Argentina; YerPhI, Armenia; ARC, Australia; BMWFW and FWF, Austria; ANAS, Azerbaijan; SSTC, Belarus; CNPq and FAPESP, Brazil; NSERC, NRC and CFI, Canada; CERN; CONICYT, Chile; CAS, MOST and NSFC, China; COLCIENCIAS, Colombia; MSMT CR, MPO CR and VSC CR, Czech Republic; DNRF and DNSRC, Denmark; IN2P3-CNRS, CEA-DSM/IRFU, France; SRNSF, Georgia; BMBF, HGF, and MPG, Germany; GSRT, Greece; RGC, Hong Kong SAR, China; ISF, I-CORE and Benoziyo Center, Israel; INFN, Italy; MEXT and JSPS, Japan; CNRST, Morocco; NWO, Netherlands; RCN, Norway; MNiSW and NCN, Poland; FCT, Portugal; MNE/IFA, Romania; MES of Russia and NRC KI, Russian Federation; JINR; MESTD, Serbia; MSSR, Slovakia; ARRS and MIZŠ, Slovenia; DST/NRF, South Africa; MINECO, Spain; SRC and Wallenberg Foundation, Sweden; SERI, SNSF and Cantons of Bern and Geneva, Switzerland; MOST, Taiwan; TAEK, Turkey; STFC, UK; DOE and NSF, USA. In addition, individual groups and members have received support from BCKDF, the Canada Council, CANARIE, CRC, Compute Canada, FQRNT, and the Ontario Innovation Trust, Canada; EPLANET, ERC, ERDF, FP7, Horizon 2020 and Marie SkłodowskaCurie Actions, European Union; Investissements d’Avenir Labex and Idex, ANR, Région Auvergne and Fondation Partager le Savoir, France; DFG and AvH Foundation, Germany; Herakleitos, Thales and Aristeia programmes co-financed by EU-ESF and the Greek NSRF; BSF, GIF and Minerva, Israel; BRF, Norway; CERCA Programme Generalitat de Catalunya, Generalitat Valenciana, Spain; the Royal Society and Leverhulme Trust, UK. The crucial computing support from all WLCG partners is acknowledged gratefully, in particular from CERN, the ATLAS Tier-1 facilities at TRIUMF (Canada), NDGF (Denmark, Norway, Sweden), CC-IN2P3 (France), KIT/GridKA (Germany), INFN-CNAF (Italy), NL-T1 (Netherlands), PIC (Spain), ASGC (Taiwan), RAL (UK) and BNL (USA), the Tier-2 facilities worldwide and large non-WLCG resource providers. Major contributors of computing resources are listed in Ref. [66]. Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecomm ons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Eur. Phys. J. C (2017) 77:466 Commons license, and indicate if changes were made. Funded by SCOAP3 . References 1. L. Evans, P. Bryant, LHC machine. JINST 3, S08001 (2008) ed. by L. Evans. doi:10.1088/1748-0221/3/08/S08001 2. ATLAS Collaboration, The ATLAS experiment at the CERN large Hadron collider. JINST 3, S08003 (2008). doi:10.1088/1748-0221/ 3/08/S08003 3. ATLAS Collaboration, Topological cell clustering in the ATLAS calorimeters and its performance in LHC Run 1. Submitted to Eur. Phys. J. C (2016). arXiv: 1603.02934 [hep-ex] 4. ATLAS Collaboration, Jet global sequential corrections √ with the ATLAS detector in proton–proton collisions at s = 8 TeV. ATLAS-CONF-2015-002 (2015). https://cds.cern.ch/ record/2001682. Accessed 11 July 2017 5. ATLAS Collaboration, Data-driven determination of the energy scale and resolution of jets reconstructed √ in the ATLAS calorimeters using dijet and multijet events at s = 8 TeV. ATLAS-CONF2015-017 (2015). https://cds.cern.ch/record/2008678. Accessed 11 July 2017 6. ATLAS Collaboration, Monte Carlo calibration and combination of in-situ measurements of jet energy scale, jet energy resolution and jet mass in ATLAS. ATLAS-CONF-2015-037 (2015). https:// cds.cern.ch/record/2044941. Accessed 11 July 2017 7. ATLAS Collaboration, Determination of the jet energy scale √ and resolution at ATLAS using Z /γ -jet events in data at s = 8 TeV. ATLAS-CONF-2015-057 (2015). https://cds.cern.ch/ record/2059846. Accessed 11 July 2017 8. ATLAS Collaboration, ATLAS: detector and physics performance technical design report. Volume 1 (1999). https://cds.cern.ch/ record/391176. Accessed 11 July 2017 9. ATLAS Collaboration, A measurement of single hadron response √ using data at s = 8 TeV with the ATLAS detector. ATL-PHYS-PUB-2014-002 (2014). https://cds.cern.ch/record/ 1668961. Accessed 11 July 2017 10. ALEPH Collaboration, D. Buskulic et al., Performance of the ALEPH detector at LEP. Nucl. Instrum. Methods A 360, 481 (1994). doi:10.1016/0168-9002(95)00138-7 11. M. Peez, Search for deviations from the standard model in high transverse energy processes at the electron–proton collider HERA. DESY-THESIS-2003-023 (2003). http://www-h1.desy.de/psfiles/ theses/h1th-317.pdf. Accessed 11 July 2017 12. ZEUS Collaboration, J. Breitweg et al., Measurement of the diffracD(4) tive structure function F2 at HERA. Eur. Phys. J. C 1, 81 (1998). doi:10.1007/BF01245799. arXiv:hep-ex/9709021 13. ZEUS.Collaboration, J. Breitweg et al., Measurement of the diffractive cross section in deep inelastic scattering using ZEUS 1994 data. Eur. Phys. J. C 6, 43 (1999). doi:10.1007/PL00021606. arXiv:hep-ex/9807010 14. P. Abreu et al., Performance of the DELPHI detector. Nucl. Instrum. Methods A 378, 57 (1996). doi:10.1016/0168-9002(96)00463-9 15. CDF Collaboration, A. Abulencia et √ al., Measurement of σ ( p p̄ → Z ) · B(Z → τ τ ) in p p̄ collisions at s = 1.96 TeV. Phys. Rev. D 75, 092004 (2007). doi:10.1103/PhysRevD.75.092004 16. DØ Collaboration, V. M. Abazov √ et al., Measurement of σ ( p p̄ → Z + X )Br(Z → τ + τ − ) at s = 1.96 TeV. Phys. Lett. B 670, 292 (2009). doi:10.1016/j.physletb.2008.11.010. arXiv:0808.1306 [hep-ex] 17. ATLAS Collaboration, Reconstruction of hadronic decay products of tau leptons with the ATLAS experiment. Eur. Phys. J. C 76, 295 Page 33 of 47 466 (2016). doi:10.1140/epjc/s10052-016-4110-0. arXiv:1512.05955 [hep-ex] 18. CMS Collaboration, Particle-flow event reconstruction in CMS and performance for jets, taus, and MET. CMS-PAS-PFT-09001 (2009). https://cds.cern.ch/record/1194487?ln=en. Accessed 11 July 2017 19. CMS Collaboration, Commissioning of the particle-flow event reconstruction with the first LHC collisions recorded in the CMS detector. CMS-PAS-PFT-10-001 (2010). https://cds.cern.ch/ record/1247373?ln=en. Accessed 11 July 2017 20. CMS Collaboration, Determination of jet energy calibration and transverse momentum resolution in CMS. JINST 6, P11002 (2011). doi:10.1088/1748-0221/6/11/P11002. arXiv:1107.4277 [hep-ex] 21. M.A. Thomson, Particle flow calorimetry and the PandoraPFA algorithm. Nucl. Instrum. Methods A 611, 25 (2009). doi:10.1016/ j.nima.2009.09.009. arXiv:0907.3577 [physics.ins-det] 22. C. Adloff et al., Tests of a particle flow algorithm with CALICE test beam data. JINST 6, P07005 (2011). doi:10.1088/1748-0221/ 6/07/P07005. arXiv:1105.3417 [physics.ins-det] 23. ATLAS Collaboration, Alignment of the ATLAS inner detector and its performance in 2012. ATLAS-CONF-2014-047 (2014). https:// cds.cern.ch/record/1741021. Accessed 11 July 2017 24. T. Sjöstrand, S. Mrenna, P. Z. Skands, A brief introduction to PYTHIA 8.1. Comput. Phys. Commun. 178, 852 (2008). doi:10. 1016/j.cpc.2008.01.036. arXiv:0710.3820 [hep-ph] 25. R. Corke, T. Sjöstrand, Improved parton showers at large transverse momenta. Eur. Phys. J. C 69, 1 (2010). doi:10.1140/epjc/ s10052-010-1409-0. arXiv:1003.2384 [hep-ph] 26. ATLAS Collaboration, Summary of ATLAS Pythia 8 tunes. ATL-PHYS-PUB-2012-003 (2012). https://cds.cern.ch/record/ 1474107. Accessed 11 July 2017 27. H.-L. Lai et al., New parton distributions for collider physics. Phys. Rev. D 82, 074024 (2010). doi:10.1103/PhysRevD.82.074024. arXiv:1007.2241 [hep-ph] 28. M. Cacciari, G.P. Salam, G. Soyez, The anti-kt jet clustering algorithm. JHEP 04, 063 (2008). doi:10.1088/1126-6708/2008/04/063. arXiv:0802.1189 [hep-ph] 29. M. Cacciari, G. P. Salam, G. Soyez, http://fastjet.fr 30. M. Cacciari, G.P. Salam, Dispelling the N 3 myth for the kt jetfinder. Phys. Lett. B 641, 57 (2006). doi:10.1016/j.physletb.2006. 08.037. arXiv:0802.1189 [hep-ph] 31. P. Nason, A new method for combining NLO QCD with shower Monte Carlo algorithms. JHEP 11, 040 (2004). doi:10.1088/ 1126-6708/2004/11/040. arXiv:hep-ph/0409146 32. S. Frixione, B. Webber, Matching NLO QCD computations and parton shower simulations. JHEP 06, 029 (2002). doi:10.1088/ 1126-6708/2002/06/029. arXiv:hep-ph/0204244 33. S. Frixione, P. Nason, B. Webber, Matching NLO QCD and parton showers in heavy flavour production. JHEP 08, 007 (2003). doi:10. 1088/1126-6708/2003/08/007. arXiv:hep-ph/0305252 34. G. Corcella et al., HERWIG 6: an event generator for hadron emission reactions with interfering gluons (including supersymmetric processes). JHEP 01, 010 (2001). doi:10.1088/1126-6708/2001/ 01/010. arXiv:hep-ph/0011363 35. J.M. Butterworth, J.R. Forshaw, M.H. Seymour, Multiparton interactions in photoproduction at HERA. Z. Phys. C 72, 637 (1996). doi:10.1007/s002880050286. arXiv:hep-ph/9601371 36. M. Aliev, H. Lacker, U. Langenfeld, S. Moch, P. Uwer et al., HATHOR: HAdronic Top and Heavy quarks crOss section calculatoR. Comput. Phys. Commun. 182, 1034 (2011). doi:10.1016/ j.cpc.2010.12.040. arXiv:1007.1327 [hep-ph] 37. M. Beneke, P. Falgari, S. Klein, C. Schwinn, Hadronic topquark pair production with NNLL threshold resummation. Nucl. Phys. B 855, 695 (2012). doi:10.1016/j.nuclphysb.2011.10.021. arXiv:1109.1536 [hep-ph] 123 466 Page 34 of 47 38. M. Czakon, P. Fiedler, A. Mitov, The total top quark pair production cross-section at hadron colliders through O(α S4 ). Phys. Rev. Lett. 110, 252004 (2013). doi:10.1103/PhysRevLett.110.252004. arXiv:1303.6254 [hep-ph] 39. M. Czakon, A. Mitov, NNLO corrections to top pair production at hadron colliders: the quark–gluon reaction. JHEP 01, 080 (2013). doi:10.1007/JHEP01(2013)080. arXiv:1210.6832 [hep-ph] 40. M. Czakon, A. Mitov, NNLO corrections to top-pair production at hadron colliders: the all-fermionic scattering channels. JHEP 12, 054 (2012). doi:10.1007/JHEP12(2012)054. arXiv:1207.0236 [hep-ph] 41. P. Bärnreuther, M. Czakon, A. Mitov, Percent level precision physics at the tevatron: first genuine NNLO QCD corrections to q q̄ → t t¯ + X . Phys. Rev. Lett. 109, 132001 (2012). doi:10.1103/ PhysRevLett.109.132001. arXiv:1204.5201 [hep-ph] 42. M. Cacciari, M. Czakon, M. Mangano, A. Mitov, P. Nason, Toppair production at hadron colliders with next-to-next-to-leading logarithmic soft-gluon resummation. Phys. Lett. B 710, 612 (2012). doi:10.1016/j.physletb.2012.03.013. arXiv:1111.5869 [hep-ph] 43. M. Czakon, A. Mitov, Top++: a program for the calculation of the top-pair cross-section at Hadron colliders. Comput. Phys. Commun. 185, 2930 (2014). doi:10.1016/j.cpc.2014.06.021. arXiv:1112.5675 [hep-ph] 44. S. Agostinelli et al., GEANT4: a simulation toolkit. Nucl. Instrum. Methods A 506, 250 (2003). doi:10.1016/S0168-9002(03)01368-8 45. ATLAS Collaboration, The ATLAS simulation infrastructure. Eur. Phys. J. C 70, 823 (2010). doi:10.1140/epjc/s10052-010-1429-9. arXiv:1005.4568 [hep-ex] 46. ATLAS Collaboration, ATLAS tunes of Pythia 6 and Pythia 8 for MC11. ATL-PHYS-PUB-2011-009 (2011). https://cds.cern.ch/ record/1363300 47. A. Sherstnev, R.S. Thorne, Parton distributions for LO generators. Eur. Phys. J. C 55, 553 (2008). doi:10.1140/epjc/ s10052-008-0610-x. arXiv:0711.2473 [hep-ph] √ 48. ATLAS Collaboration, Charged-particle distributions in s = 13 TeV pp interactions measured with the ATLAS detector at the LHC. Phys. Lett. B 758, 67 (2016). doi:10.1016/j.physletb.2016. 04.050. arXiv:1602.01633 [hep-ex] 49. ATLAS Collaboration, Measurement of the muon reconstruction performance of the ATLAS detector using 2011 and 2012 LHC proton–proton collision data. Eur. Phys. J. C 74, 3130 (2014). doi:10.1140/epjc/s10052-014-3130-x. arXiv:1407.3935 [hep-ex] 50. ATLAS Collaboration, Commissioning of the ATLAS high performance b-tagging algorithms in the 7 TeV collision data. ATLAS-CONF-2011-102 (2011). https://cds.cern.ch/record/ 1369219. Accessed 11 July 2017 51. ATLAS Collaboration, Characterisation and mitigation of beaminduced backgrounds observed in the ATLAS detector during the 2011 proton–proton run. JINST 8, P07004 (2013). doi:10.1088/ 1748-0221/8/07/P07004. arXiv:1303.0223 [hep-ex] 52. ATLAS Collaboration, Selection of jets produced in proton– proton collisions with the ATLAS detector using 2011 data. ATLAS-CONF-2012-020 (2012).https://cds.cern.ch/record/ 1430034. Accessed 11 July 2017 123 Eur. Phys. J. C (2017) 77:466 53. ATLAS Collaboration, Performance √ of algorithms that reconstruct missing transverse momentum in s = 8 TeV proton–proton collisions in the ATLAS detector (2016). arXiv:1609.09324 [hep-ex] 54. I.G. Knowles, G.D. Lafferty, Hadronization in Z 0 decay. J. Phys. G 23, 731 (1997). doi:10.1088/0954-3899/23/7/003. arXiv:hep-ph/9705217 55. M. Green, S. Lloyd, P. Ratoff, D. Ward, Electron–Positron physics at the Z, studies in high energy physics, cosmology, and gravitation. IOP Pub. (1998). ISBN:9780750303835 56. ATLAS Collaboration, d E/d x measurement in the ATLAS Pixel Detector and its use for particle identification. ATLAS-CONF2011-016 (2011). https://cds.cern.ch/record/1336519. Accessed 11 July 2017 57. ATLAS Collaboration, Performance of the ATLAS inner detector track and vertex reconstruction in high pile-up LHC environment. ATLAS-CONF-2012-042 (2012). https://cds.cern.ch/ record/1435196. Accessed 11 July 2017 58. ATLAS Collaboration, Electron efficiency measurements with the ATLAS detector using 2012 LHC proton-proton collision data (2016). arXiv:1612.01456 [hep-ex] 59. ATLAS Collaboration, Charged-particle multiplicities in pp inter√ actions at s = 900 GeV measured with the ATLAS detector at the LHC. Phys. Lett. B 688, 21 (2010). doi:10.1016/j.physletb. 2010.03.064. arXiv: 1003.3124 [hep-ex] 60. M. Cacciari, G.P. Salam, G. Soyez, The catchment area of jets. JHEP 04, 005 (2008). doi:10.1088/1126-6708/2008/04/005. arXiv:0802.1188 [hep-ph] 61. M. Cacciari, G.P. Salam, Pileup subtraction using jet areas. Phys. Lett. B 659, 119 (2008). doi:10.1016/j.physletb.2007.09.077. arXiv:0707.1378 [hep-ph] 62. S.D. Ellis, D.E. Soper, Successive combination jet algorithm for hadron collisions. Phys. Rev. D 48, 3160 (1993). doi:10.1103/ PhysRevD.48.3160. arXiv:hep-ph/9305266 63. S. Catani, Y.L. Dokshitzer, M.H. Seymour, B.R. Webber, Longitudinally invariant K t clustering algorithms for hadron hadron collisions. Nucl. Phys. B 406, 187 (1993). doi:10.1016/ 0550-3213(93)90166-M 64. ATLAS Collaboration, Jet energy measurement √ and its systematic uncertainty in proton–proton collisions at s = 7 TeV with the ATLAS detector. Eur. Phys. J. C 75, 17 (2015). doi:10.1140/epjc/ s10052-014-3190-y. arXiv:1406.0076 [hep-ex] 65. ATLAS Collaboration, Performance of pile-up mitigation techniques for jets in pp collisions with the ATLAS detector. Eur. Phys. J. C 76, 581 (2016). doi:10.1140/epjc/s10052-016-4395-z. arXiv:1510.03823 [hep-ex] 66. ATLAS Collaboration, ATLAS computing acknowledgements 2016–2017. ATL-GEN-PUB-2016-002 https://cds.cern.ch/record/ 2202407. Accessed 11 July 2017 Eur. Phys. J. C (2017) 77:466 Page 35 of 47 466 ATLAS Collaboration M. Aaboud137d , G. Aad88 , B. Abbott115 , J. Abdallah8 , O. Abdinov12,* , B. Abeloos119 , S. H. Abidi161 , O. S. AbouZeid139 , N. L. Abraham151 , H. Abramowicz155 , H. Abreu154 , R. Abreu118 , Y. Abulaiti148a,148b , B. S. Acharya167a,167b,a , S. Adachi157 , L. Adamczyk41a , J. Adelman110 , M. Adersberger102 , T. Adye133 , A. A. Affolder139 , T. Agatonovic-Jovin14 , C. Agheorghiesei28c , J. A. Aguilar-Saavedra128a,128f , S. P. Ahlen24 , F. Ahmadov68,b , G. Aielli135a,135b , S. Akatsuka71 , H. Akerstedt148a,148b , T. P. A. Åkesson84 , A. V. Akimov98 , G. L. Alberghi22a,22b , J. Albert172 , M. J. Alconada Verzini74 , M. Aleksa32 , I. N. Aleksandrov68 , C. Alexa28b , G. Alexander155 , T. Alexopoulos10 , M. Alhroob115 , B. Ali130 , M. Aliev76a,76b , G. Alimonti94a , J. Alison33 , S. P. Alkire38 , B. M. M. Allbrooke151 , B. W. Allen118 , P. P. Allport19 , A. Aloisio106a,106b , A. Alonso39 , F. Alonso74 , C. Alpigiani140 , A. A. Alshehri56 , M. Alstaty88 , B. Alvarez Gonzalez32 , D. Álvarez Piqueras170 , M. G. Alviggi106a,106b , B. T. Amadio16 , Y. Amaral Coutinho26a , C. Amelung25 , D. Amidei92 , S. P. Amor Dos Santos128a,128c , A. Amorim128a,128b , S. Amoroso32 , G. Amundsen25 , C. Anastopoulos141 , L. S. Ancu52 , N. Andari19 , T. Andeen11 , C. F. Anders60b , J. K. Anders77 , K. J. Anderson33 , A. Andreazza94a,94b , V. Andrei60a , S. Angelidakis9 , I. Angelozzi109 , A. Angerami38 , F. Anghinolfi32 , A. V. Anisenkov111,c , N. Anjos13 , A. Annovi126a,126b , C. Antel60a , M. Antonelli50 , A. Antonov100,* , D. J. Antrim166 , F. Anulli134a , M. Aoki69 , L. Aperio Bella32 , G. Arabidze93 , Y. Arai69 , J. P. Araque128a , V. Araujo Ferraz26a , A. T. H. Arce48 , R. E. Ardell80 , F. A. Arduh74 , J.-F. Arguin97 , S. Argyropoulos66 , M. Arik20a , A. J. Armbruster145 , L. J. Armitage79 , O. Arnaez32 , H. Arnold51 , M. Arratia30 , O. Arslan23 , A. Artamonov99 , G. Artoni122 , S. Artz86 , S. Asai157 , N. Asbah45 , A. Ashkenazi155 , L. Asquith151 , K. Assamagan27 , R. Astalos146a , M. Atkinson169 , N. B. Atlay143 , K. Augsten130 , G. Avolio32 , B. Axen16 , M. K. Ayoub119 , G. Azuelos97,d , A. E. Baas60a , M. J. Baca19 , H. Bachacou138 , K. Bachas76a,76b , M. Backes122 , M. Backhaus32 , P. Bagiacchi134a,134b , P. Bagnaia134a,134b , H. Bahrasemani144 , J. T. Baines133 , M. Bajic39 , O. K. Baker179 , E. M. Baldin111,c , P. Balek175 , T. Balestri150 , F. Balli138 , W. K. Balunas124 , E. Banas42 , Sw. Banerjee176,e , A. A. E. Bannoura178 , L. Barak32 , E. L. Barberio91 , D. Barberis53a,53b , M. Barbero88 , T. Barillari103 , M.-S. Barisits32 , T. Barklow145 , N. Barlow30 , S. L. Barnes36c , B. M. Barnett133 , R. M. Barnett16 , Z. Barnovska-Blenessy36a , A. Baroncelli136a , G. Barone25 , A. J. Barr122 , L. Barranco Navarro170 , F. Barreiro85 , J. Barreiro Guimarães da Costa35a , R. Bartoldus145 , A. E. Barton75 , P. Bartos146a , A. Basalaev125 , A. Bassalat119,f , R. L. Bates56 , S. J. Batista161 , J. R. Batley30 , M. Battaglia139 , M. Bauce134a,134b , F. Bauer138 , H. S. Bawa145,g , J. B. Beacham113 , M. D. Beattie75 , T. Beau83 , P. H. Beauchemin165 , P. Bechtle23 , H. P. Beck18,h , K. Becker122 , M. Becker86 , M. Beckingham173 , C. Becot112 , A. J. Beddall20e , A. Beddall20b , V. A. Bednyakov68 , M. Bedognetti109 , C. P. Bee150 , T. A. Beermann32 , M. Begalli26a , M. Begel27 , J. K. Behr45 , A. S. Bell81 , G. Bella155 , L. Bellagamba22a , A. Bellerive31 , M. Bellomo89 , K. Belotskiy100 , O. Beltramello32 , N. L. Belyaev100 , O. Benary155,* , D. Benchekroun137a , M. Bender102 , K. Bendtz148a,148b , N. Benekos10 , Y. Benhammou155 , E. Benhar Noccioli179 , J. Benitez66 , D. P. Benjamin48 , M. Benoit52 , J. R. Bensinger25 , S. Bentvelsen109 , L. Beresford122 , M. Beretta50 , D. Berge109 , E. Bergeaas Kuutmann168 , N. Berger5 , J. Beringer16 , S. Berlendis58 , N. R. Bernard89 , G. Bernardi83 , C. Bernius145 , F. U. Bernlochner23 , T. Berry80 , P. Berta131 , C. Bertella86 , G. Bertoli148a,148b , F. Bertolucci126a,126b , I. A. Bertram75 , C. Bertsche45 , D. Bertsche115 , G. J. Besjes39 , O. Bessidskaia Bylund148a,148b , M. Bessner45 , N. Besson138 , C. Betancourt51 , A. Bethani87 , S. Bethke103 , A. J. Bevan79 , R. M. Bianchi127 , O. Biebel102 , D. Biedermann17 , R. Bielski87 , N. V. Biesuz126a,126b , M. Biglietti136a , J. Bilbao De Mendizabal52 , T. R. V. Billoud97 , H. Bilokon50 , M. Bindi57 , A. Bingul20b , C. Bini134a,134b , S. Biondi22a,22b , T. Bisanz57 , C. Bittrich47 , D. M. Bjergaard48 , C. W. Black152 , J. E. Black145 , K. M. Black24 , D. Blackburn140 , R. E. Blair6 , T. Blazek146a , I. Bloch45 , C. Blocker25 , A. Blue56 , W. Blum86,* , U. Blumenschein79 , S. Blunier34a , G. J. Bobbink109 , V. S. Bobrovnikov111,c , S. S. Bocchetta84 , A. Bocci48 , C. Bock102 , M. Boehler51 , D. Boerner178 , D. Bogavac102 , A. G. Bogdanchikov111 , C. Bohm148a , V. Boisvert80 , P. Bokan168,i , T. Bold41a , A. S. Boldyrev101 , M. Bomben83 , M. Bona79 , M. Boonekamp138 , A. Borisov132 , G. Borissov75 , J. Bortfeldt32 , D. Bortoletto122 , V. Bortolotto62a,62b,62c , K. Bos109 , D. Boscherini22a , M. Bosman13 , J. D. Bossio Sola29 , J. Boudreau127 , J. Bouffard2 , E. V. Bouhova-Thacker75 , D. Boumediene37 , C. Bourdarios119 , S. K. Boutle56 , A. Boveia113 , J. Boyd32 , I. R. Boyko68 , J. Bracinik19 , A. Brandt8 , G. Brandt57 , O. Brandt60a , U. Bratzler158 , B. Brau89 , J. E. Brau118 , W. D. Breaden Madden56 , K. Brendlinger45 , A. J. Brennan91 , L. Brenner109 , R. Brenner168 , S. Bressler175 , D. L. Briglin19 , T. M. Bristow49 , D. Britton56 , D. Britzger45 , F. M. Brochu30 , I. Brock23 , R. Brock93 , G. Brooijmans38 , T. Brooks80 , W. K. Brooks34b , J. Brosamer16 , E. Brost110 , J. H Broughton19 , P. A. Bruckman de Renstrom42 , D. Bruncko146b , A. Bruni22a , G. Bruni22a , L. S. Bruni109 , BH Brunt30 , M. Bruschi22a , N. Bruscino23 , P. Bryant33 , L. Bryngemark84 , T. Buanes15 , Q. Buat144 , P. Buchholz143 , A. G. Buckley56 , I. A. Budagov68 , F. Buehrer51 , M. K. Bugge121 , O. Bulekov100 , D. Bullock8 , H. Burckhart32 , S. Burdin77 , C. D. Burgard51 , A. M. Burger5 , B. Burghgrave110 , K. Burka42 , S. Burke133 , I. Burmeister46 , J. T. P. Burr122 , E. Busato37 , D. Büscher51 , V. Büscher86 , P. Bussey56 , J. M. Butler24 , C. M. Buttar56 , J. M. Butterworth81 , P. Butti32 , W. Buttinger27 , A. Buzatu35c , A. R. Buzykaev111,c , S. Cabrera Urbán170 , 123 466 Page 36 of 47 Eur. Phys. J. C (2017) 77:466 D. Caforio130 , V. M. Cairo40a,40b , O. Cakir4a , N. Calace52 , P. Calafiura16 , A. Calandri88 , G. Calderini83 , P. Calfayan64 , G. Callea40a,40b , L. P. Caloba26a , S. Calvente Lopez85 , D. Calvet37 , S. Calvet37 , T. P. Calvet88 , R. Camacho Toro33 , S. Camarda32 , P. Camarri135a,135b , D. Cameron121 , R. Caminal Armadans169 , C. Camincher58 , S. Campana32 , M. Campanelli81 , A. Camplani94a,94b , A. Campoverde143 , V. Canale106a,106b , M. Cano Bret36c , J. Cantero116 , T. Cao155 , M. D. M. Capeans Garrido32 , I. Caprini28b , M. Caprini28b , M. Capua40a,40b , R. M. Carbone38 , R. Cardarelli135a , F. Cardillo51 , I. Carli131 , T. Carli32 , G. Carlino106a , B. T. Carlson127 , L. Carminati94a,94b , R. M. D. Carney148a,148b , S. Caron108 , E. Carquin34b , G. D. Carrillo-Montoya32 , J. Carvalho128a,128c , D. Casadei19 , M. P. Casado13,j , M. Casolino13 , D. W. Casper166 , R. Castelijn109 , A. Castelli109 , V. Castillo Gimenez170 , N. F. Castro128a,k , A. Catinaccio32 , J. R. Catmore121 , A. Cattai32 , J. Caudron23 , V. Cavaliere169 , E. Cavallaro13 , D. Cavalli94a , M. Cavalli-Sforza13 , V. Cavasinni126a,126b , E. Celebi20a , F. Ceradini136a,136b , L. Cerda Alberich170 , A. S. Cerqueira26b , A. Cerri151 , L. Cerrito135a,135b , F. Cerutti16 , A. Cervelli18 , S. A. Cetin20d , A. Chafaq137a , D. Chakraborty110 , S. K. Chan59 , W. S. Chan109 , Y. L. Chan62a , P. Chang169 , J. D. Chapman30 , D. G. Charlton19 , A. Chatterjee52 , C. C. Chau161 , C. A. Chavez Barajas151 , S. Che113 , S. Cheatham167a,167c , A. Chegwidden93 , S. Chekanov6 , S. V. Chekulaev163a , G. A. Chelkov68,l , M. A. Chelstowska32 , C. Chen67 , H. Chen27 , S. Chen35b , S. Chen157 , X. Chen35c,m , Y. Chen70 , H. C. Cheng92 , H. J. Cheng35a , Y. Cheng33 , A. Cheplakov68 , E. Cheremushkina132 , R. Cherkaoui El Moursli137e , V. Chernyatin27,* , E. Cheu7 , L. Chevalier138 , V. Chiarella50 , G. Chiarelli126a,126b , G. Chiodini76a , A. S. Chisholm32 , A. Chitan28b , Y. H. Chiu172 , M. V. Chizhov68 , K. Choi64 , A. R. Chomont37 , S. Chouridou9 , B. K. B. Chow102 , V. Christodoulou81 , D. Chromek-Burckhart32 , M. C. Chu62a , J. Chudoba129 , A. J. Chuinard90 , J. J. Chwastowski42 , L. Chytka117 , A. K. Ciftci4a , D. Cinca46 , V. Cindro78 , I. A. Cioara23 , C. Ciocca22a,22b , A. Ciocio16 , F. Cirotto106a,106b , M. Citterio94a , M. Ciubancan28b , A. Clark52 , B. L. Clark59 , M. R. Clark38 , P. J. Clark49 , Z. H. Citron175 , 16 148a,148b 88 167a,167c 52 67 , Y. Coadou , M. Cobal , A. Coccaro , J. Cochran , L. Colasurdo108 , R. N. Clarke , C. Clement B. Cole38 , A. P. Colijn109 , J. Collot58 , T. Colombo166 , P. Conde Muiño128a,128b , E. Coniavitis51 , S. H. Connell147b , I. A. Connelly87 , V. Consorti51 , S. Constantinescu28b , G. Conti32 , F. Conventi106a,n , M. Cooke16 , B. D. Cooper81 , A. M. Cooper-Sarkar122 , F. Cormier171 , K. J. R. Cormier161 , T. Cornelissen178 , M. Corradi134a,134b , F. Corriveau90,o , A. Cortes-Gonzalez32 , G. Cortiana103 , G. Costa94a , M. J. Costa170 , D. Costanzo141 , G. Cottin30 , G. Cowan80 , B. E. Cox87 , K. Cranmer112 , S. J. Crawley56 , R. A. Creager124 , G. Cree31 , S. Crépé-Renaudin58 , F. Crescioli83 , W. A. Cribbs148a,148b , M. Crispin Ortuzar122 , M. Cristinziani23 , V. Croft108 , G. Crosetti40a,40b , A. Cueto85 , T. Cuhadar Donszelmann141 , A. R. Cukierman145 , J. Cummings179 , M. Curatolo50 , J. Cúth86 , H. Czirr143 , P. Czodrowski32 , G. D’amen22a,22b , S. D’Auria56 , M. D’Onofrio77 , M. J. Da Cunha Sargedas De Sousa128a,128b , C. Da Via87 , W. Dabrowski41a , T. Dado146a , T. Dai92 , O. Dale15 , F. Dallaire97 , C. Dallapiccola89 , M. Dam39 , J. R. Dandoy124 , N. P. Dang51 , A. C. Daniells19 , N. S. Dann87 , M. Danninger171 , M. Dano Hoffmann138 , V. Dao150 , G. Darbo53a , S. Darmora8 , J. Dassoulas3 , A. Dattagupta118 , T. Daubney45 , W. Davey23 , C. David45 , T. Davidek131 , M. Davies155 , P. Davison81 , E. Dawe91 , I. Dawson141 , K. De8 , R. de Asmundis106a , A. De Benedetti115 , S. De Castro22a,22b , S. De Cecco83 , N. De Groot108 , P. de Jong109 , H. De la Torre93 , F. De Lorenzi67 , A. De Maria57 , D. De Pedis134a , A. De Salvo134a , U. De Sanctis135a,135b , A. De Santo151 , K. De Vasconcelos Corga88 , J. B. De Vivie De Regie119 , W. J. Dearnaley75 , R. Debbe27 , C. Debenedetti139 , D. V. Dedovich68 , N. Dehghanian3 , I. Deigaard109 , M. Del Gaudio40a,40b , J. Del Peso85 , T. Del Prete126a,126b , F. Deliot138 , C. M. Delitzsch52 , A. Dell’Acqua32 , L. Dell’Asta24 , M. Dell’Orso126a,126b , D. Delgove119 , 106a,106b 52 5 119 58 , D. della Volpe , M. Delmastro , C. Delporte , P. A. Delsart , D. A. DeMarco161 , S. Demers179 , M. Della Pietra 68 M. Demichev , A. Demilly83 , S. P. Denisov132 , D. Denysiuk138 , D. Derendarz42 , J. E. Derkaoui137d , F. Derue83 , P. Dervan77 , K. Desch23 , C. Deterre45 , K. Dette46 , P. O. Deviveiros32 , A. Dewhurst133 , S. Dhaliwal25 , A. Di Ciaccio135a,135b , L. Di Ciaccio5 , W. K. Di Clemente124 , C. Di Donato106a,106b , A. Di Girolamo32 , B. Di Girolamo32 , B. Di Micco136a,136b , R. Di Nardo32 , K. F. Di Petrillo59 , A. Di Simone51 , R. Di Sipio161 , D. Di Valentino31 , C. Diaconu88 , M. Diamond161 , F. A. Dias49 , M. A. Diaz34a , E. B. Diehl92 , J. Dietrich17 , S. Díez Cornell45 , A. Dimitrievska14 , J. Dingfelder23 , P. Dita28b , S. Dita28b , F. Dittus32 , F. Djama88 , T. Djobava54b , J. I. Djuvsland60a , M. A. B. do Vale26c , D. Dobos32 , M. Dobre28b , C. Doglioni84 , J. Dolejsi131 , Z. Dolezal131 , M. Donadelli26d , S. Donati126a,126b , P. Dondero123a,123b , J. Donini37 , J. Dopke133 , A. Doria106a , M. T. Dova74 , A. T. Doyle56 , E. Drechsler57 , M. Dris10 , Y. Du36b , J. Duarte-Campderros155 , E. Duchovni175 , G. Duckeck102 , A. Ducourthial83 , O. A. Ducu97,p , D. Duda109 , A. Dudarev32 , A. Chr. Dudder86 , E. M. Duffield16 , L. Duflot119 , M. Dührssen32 , M. Dumancic175 , A. E. Dumitriu28b , A. K. Duncan56 , M. Dunford60a , H. Duran Yildiz4a , M. Düren55 , A. Durglishvili54b , D. Duschinger47 , B. Dutta45 , M. Dyndal45 , C. Eckardt45 , K. M. Ecker103 , R. C. Edgar92 , T. Eifert32 , G. Eigen15 , K. Einsweiler16 , T. Ekelof168 , M. El Kacimi137c , R. El Kosseifi88 , V. Ellajosyula88 , M. Ellert168 , S. Elles5 , F. Ellinghaus178 , A. A. Elliot172 , N. Ellis32 , J. Elmsheuser27 , M. Elsing32 , D. Emeliyanov133 , Y. Enari157 , O. C. Endner86 , J. S. Ennis173 , J. Erdmann46 , A. Ereditato18 , G. Ernis178 , M. Ernst27 , S. Errede169 , E. Ertel86 , M. Escalier119 , H. Esch46 , C. Escobar127 , B. Esposito50 , O. Estrada Pastor170 , A. I. Etienvre138 , E. Etzion155 , 123 Eur. Phys. J. C (2017) 77:466 Page 37 of 47 466 H. Evans64 , A. Ezhilov125 , F. Fabbri22a,22b , L. Fabbri22a,22b , G. Facini33 , R. M. Fakhrutdinov132 , S. Falciano134a , R. J. Falla81 , J. Faltova32 , Y. Fang35a , M. Fanti94a,94b , A. Farbin8 , A. Farilla136a , C. Farina127 , E. M. Farina123a,123b , T. Farooque93 , S. Farrell16 , S. M. Farrington173 , P. Farthouat32 , F. Fassi137e , P. Fassnacht32 , D. Fassouliotis9 , M. Faucci Giannelli80 , A. Favareto53a,53b , W. J. Fawcett122 , L. Fayard119 , O. L. Fedin125,q , W. Fedorko171 , S. Feigl121 , L. Feligioni88 , C. Feng36b , E. J. Feng32 , H. Feng92 , A. B. Fenyuk132 , L. Feremenga8 , P. Fernandez Martinez170 , S. Fernandez Perez13 , J. Ferrando45 , A. Ferrari168 , P. Ferrari109 , R. Ferrari123a , D. E. Ferreira de Lima60b , A. Ferrer170 , D. Ferrere52 , C. Ferretti92 , F. Fiedler86 , A. Filipčič78 , M. Filipuzzi45 , F. Filthaut108 , M. Fincke-Keeler172 , K. D. Finelli152 , M. C. N. Fiolhais128a,128c,r , L. Fiorini170 , A. Fischer2 , C. Fischer13 , J. Fischer178 , W. C. Fisher93 , N. Flaschel45 , I. Fleck143 , P. Fleischmann92 , G. T. Fletcher141 , R. R. M. Fletcher124 , T. Flick178 , B. M. Flierl102 , L. R. Flores Castillo62a , M. J. Flowerdew103 , G. T. Forcolin87 , A. Formica138 , A. Forti87 , A. G. Foster19 , D. Fournier119 , H. Fox75 , S. Fracchia141 , P. Francavilla83 , M. Franchini22a,22b , S. Franchino60a , D. Francis32 , L. Franconi121 , M. Franklin59 , M. Frate166 , M. Fraternali123a,123b , D. Freeborn81 , S. M. Fressard-Batraneanu32 , B. Freund97 , D. Froidevaux32 , J. A. Frost122 , C. Fukunaga158 , E. Fullana Torregrosa86 , T. Fusayasu104 , J. Fuster170 , C. Gabaldon58 , O. Gabizon154 , A. Gabrielli22a,22b , A. Gabrielli16 , G. P. Gach41a , S. Gadatsch32 , S. Gadomski80 , G. Gagliardi53a,53b , L. G. Gagnon97 , P. Gagnon64 , C. Galea108 , B. Galhardo128a,128c , E. J. Gallas122 , B. J. Gallop133 , P. Gallus130 , G. Galster39 , K. K. Gan113 , S. Ganguly37 , J. Gao36a , Y. Gao77 , Y. S. Gao145,g , F. M. Garay Walls49 , C. García170 , J. E. García Navarro170 , M. Garcia-Sciveres16 , R. W. Gardner33 , N. Garelli145 , V. Garonne121 , A. Gascon Bravo45 , K. Gasnikova45 , C. Gatti50 , A. Gaudiello53a,53b , G. Gaudio123a , I. L. Gavrilenko98 , C. Gay171 , G. Gaycken23 , E. N. Gazis10 , C. N. P. Gee133 , M. Geisen86 , M. P. Geisler60a , K. Gellerstedt148a,148b , C. Gemme53a , M. H. Genest58 , C. Geng36a,s , S. Gentile134a,134b , C. Gentsos156 , S. George80 , D. Gerbaudo13 , A. Gershon155 , S. Ghasemi143 , M. Ghneimat23 , B. Giacobbe22a , S. Giagu134a,134b , P. Giannetti126a,126b , S. M. Gibson80 , M. Gignac171 , M. Gilchriese16 , D. Gillberg31 , G. Gilles178 , D. M. Gingrich3,d , N. Giokaris9,* , M. P. Giordani167a,167c , F. M. Giorgi22a , P. F. Giraud138 , P. Giromini59 , D. Giugni94a , F. Giuli122 , C. Giuliani103 , M. Giulini60b , B. K. Gjelsten121 , S. Gkaitatzis156 , I. Gkialas9 , E. L. Gkougkousis139 , L. K. Gladilin101 , C. Glasman85 , J. Glatzer13 , P. C. F. Glaysher45 , A. Glazov45 , M. Goblirsch-Kolb25 , J. Godlewski42 , S. Goldfarb91 , T. Golling52 , D. Golubkov132 , A. Gomes128a,128b,128d , R. Gonçalo128a , R. Goncalves Gama26a , J. Goncalves Pinto Firmino Da Costa138 , G. Gonella51 , L. Gonella19 , A. Gongadze68 , S. González de la Hoz170 , S. Gonzalez-Sevilla52 , L. Goossens32 , P. A. Gorbounov99 , H. A. Gordon27 , I. Gorelov107 , B. Gorini32 , E. Gorini76a,76b , A. Gorišek78 , A. T. Goshaw48 , C. Gössling46 , M. I. Gostkin68 , C. R. Goudet119 , D. Goujdami137c , A. G. Goussiou140 , N. Govender147b,t , E. Gozani154 , L. Graber57 , I. Grabowska-Bold41a , P. O. J. Gradin168 , J. Gramling52 , E. Gramstad121 , S. Grancagnolo17 , V. Gratchev125 , P. M. Gravila28f , C. Gray56 , H. M. Gray32 , Z. D. Greenwood82,u , C. Grefe23 , K. Gregersen81 , I. M. Gregor45 , P. Grenier145 , K. Grevtsov5 , J. Griffiths8 , A. A. Grillo139 , K. Grimm75 , S. Grinstein13,v , Ph. Gris37 , J.-F. Grivaz119 , S. Groh86 , E. Gross175 , J. Grosse-Knetter57 , G. C. Grossi82 , Z. J. Grout81 , A. Grummer107 , L. Guan92 , W. Guan176 , J. Guenther65 , F. Guescini163a , D. Guest166 , O. Gueta155 , B. Gui113 , E. Guido53a,53b , T. Guillemin5 , S. Guindon2 , U. Gul56 , C. Gumpert32 , J. Guo36c , W. Guo92 , Y. Guo36a , R. Gupta43 , S. Gupta122 , G. Gustavino134a,134b , P. Gutierrez115 , N. G. Gutierrez Ortiz81 , C. Gutschow81 , C. Guyot138 , M. P. Guzik41a , C. Gwenlan122 , C. B. Gwilliam77 , A. Haas112 , C. Haber16 , H. K. Hadavand8 , A. Hadef88 , S. Hageböck23 , M. Hagihara164 , H. Hakobyan180,* , M. Haleem45 , J. Haley116 , G. Halladjian93 , G. D. Hallewell88 , K. Hamacher178 , P. Hamal117 , K. Hamano172 , A. Hamilton147a , G. N. Hamity141 , P. G. Hamnett45 , L. Han36a , S. Han35a , K. Hanagaki69,w , K. Hanawa157 , M. Hance139 , B. Haney124 , P. Hanke60a , J. B. Hansen39 , J. D. Hansen39 , M. C. Hansen23 , P. H. Hansen39 , K. Hara164 , A. S. Hard176 , T. Harenberg178 , F. Hariri119 , S. Harkusha95 , R. D. Harrington49 , P. F. Harrison173 , F. Hartjes109 , N. M. Hartmann102 , M. Hasegawa70 , Y. Hasegawa142 , A. Hasib49 , S. Hassani138 , S. Haug18 , R. Hauser93 , L. Hauswald47 , L. B. Havener38 , M. Havranek130 , C. M. Hawkes19 , R. J. Hawkings32 , D. Hayakawa159 , D. Hayden93 , C. P. Hays122 , J. M. Hays79 , H. S. Hayward77 , S. J. Haywood133 , S. J. Head19 , T. Heck86 , V. Hedberg84 , L. Heelan8 , K. K. Heidegger51 , S. Heim45 , T. Heim16 , B. Heinemann45,x , J. J. Heinrich102 , L. Heinrich112 , C. Heinz55 , J. Hejbal129 , L. Helary32 , A. Held171 , S. Hellman148a,148b , C. Helsens32 , J. Henderson122 , R. C. W. Henderson75 , Y. Heng176 , S. Henkelmann171 , A. M. Henriques Correia32 , S. Henrot-Versille119 , G. H. Herbert17 , H. Herde25 , V. Herget177 , Y. Hernández Jiménez147c , G. Herten51 , R. Hertenberger102 , L. Hervas32 , T. C. Herwig124 , G. G. Hesketh81 , N. P. Hessey163a , J. W. Hetherly43 , S. Higashino69 , E. Higón-Rodriguez170 , E. Hill172 , J. C. Hill30 , K. H. Hiller45 , S. J. Hillier19 , I. Hinchliffe16 , M. Hirose51 , D. Hirschbuehl178 , B. Hiti78 , O. Hladik129 , X. Hoad49 , J. Hobbs150 , N. Hod163a , M. C. Hodgkinson141 , P. Hodgson141 , A. Hoecker32 , M. R. Hoeferkamp107 , F. Hoenig102 , D. Hohn23 , T. R. Holmes16 , M. Homann46 , S. Honda164 , T. Honda69 , T. M. Hong127 , B. H. Hooberman169 , W. H. Hopkins118 , Y. Horii105 , A. J. Horton144 , J.-Y. Hostachy58 , S. Hou153 , A. Hoummada137a , J. Howarth45 , J. Hoya74 , M. Hrabovsky117 , I. Hristova17 , J. Hrivnac119 , T. Hryn’ova5 , A. Hrynevich96 , P. J. Hsu63 , S.-C. Hsu140 , Q. Hu36a , S. Hu36c , Y. Huang35a , Z. Hubacek130 , F. Hubaut88 , F. Huegging23 , T. B. Huffman122 , E. W. Hughes38 , G. Hughes75 , 123 466 Page 38 of 47 Eur. Phys. J. C (2017) 77:466 M. Huhtinen32 , P. Huo150 , N. Huseynov68,b , J. Huston93 , J. Huth59 , G. Iacobucci52 , G. Iakovidis27 , I. Ibragimov143 , L. Iconomidou-Fayard119 , P. Iengo32 , O. Igonkina109,y , T. Iizawa174 , Y. Ikegami69 , M. Ikeno69 , Y. Ilchenko11,z , D. Iliadis156 , N. Ilic145 , G. Introzzi123a,123b , P. Ioannou9,* , M. Iodice136a , K. Iordanidou38 , V. Ippolito59 , N. Ishijima120 , M. Ishino157 , M. Ishitsuka159 , C. Issever122 , S. Istin20a , F. Ito164 , J. M. Iturbe Ponce87 , R. Iuppa162a,162b , H. Iwasaki69 , J. M. Izen44 , V. Izzo106a , S. Jabbar3 , P. Jackson1 , V. Jain2 , K. B. Jakobi86 , K. Jakobs51 , S. Jakobsen32 , T. Jakoubek129 , D. O. Jamin116 , D. K. Jana82 , R. Jansky65 , J. Janssen23 , M. Janus57 , P. A. Janus41a , G. Jarlskog84 , N. Javadov68,b , T. Javůrek51 , M. Javurkova51 , F. Jeanneau138 , L. Jeanty16 , J. Jejelava54a,aa , A. Jelinskas173 , P. Jenni51,ab , C. Jeske173 , S. Jézéquel5 , H. Ji176 , J. Jia150 , H. Jiang67 , Y. Jiang36a , Z. Jiang145 , S. Jiggins81 , J. Jimenez Pena170 , S. Jin35a , A. Jinaru28b , O. Jinnouchi159 , H. Jivan147c , P. Johansson141 , K. A. Johns7 , C. A. Johnson64 , W. J. Johnson140 , K. Jon-And148a,148b , R. W. L. Jones75 , S. Jones7 , T. J. Jones77 , J. Jongmanns60a , P. M. Jorge128a,128b , J. Jovicevic163a , X. Ju176 , A. Juste Rozas13,v , M. K. Köhler175 , A. Kaczmarska42 , M. Kado119 , H. Kagan113 , M. Kagan145 , S. J. Kahn88 , T. Kaji174 , E. Kajomovitz48 , C. W. Kalderon84 , A. Kaluza86 , S. Kama43 , A. Kamenshchikov132 , N. Kanaya157 , S. Kaneti30 , L. Kanjir78 , V. A. Kantserov100 , J. Kanzaki69 , B. Kaplan112 , L. S. Kaplan176 , D. Kar147c , K. Karakostas10 , N. Karastathis10 , M. J. Kareem57 , E. Karentzos10 , S. N. Karpov68 , Z. M. Karpova68 , K. Karthik112 , V. Kartvelishvili75 , A. N. Karyukhin132 , K. Kasahara164 , L. Kashif176 , R. D. Kass113 , A. Kastanas149 , Y. Kataoka157 , C. Kato157 , A. Katre52 , J. Katzy45 , K. Kawade105 , K. Kawagoe73 , T. Kawamoto157 , G. Kawamura57 , E. F. Kay77 , V. F. Kazanin111,c , R. Keeler172 , R. Kehoe43 , J. S. Keller45 , J. J. Kempster80 , H. Keoshkerian161 , O. Kepka129 , B. P. Kerševan78 , S. Kersten178 , R. A. Keyes90 , M. Khader169 , F. Khalil-zada12 , A. Khanov116 , A. G. Kharlamov111,c , T. Kharlamova111,c , A. Khodinov160 , T. J. Khoo52 , V. Khovanskiy99,* , E. Khramov68 , J. Khubua54b,ac , S. Kido70 , C. R. Kilby80 , H. Y. Kim8 , S. H. Kim164 , Y. K. Kim33 , N. Kimura156 , O. M. Kind17 , B. T. King77 , D. Kirchmeier47 , J. Kirk133 , A. E. Kiryunin103 , T. Kishimoto157 , D. Kisielewska41a , K. Kiuchi164 , O. Kivernyk5 , E. Kladiva146b , T. Klapdor-Kleingrothaus51 , M. H. Klein38 , M. Klein77 , U. Klein77 , K. Kleinknecht86 , P. Klimek110 , A. Klimentov27 , R. Klingenberg46 , T. Klingl23 , T. Klioutchnikova32 , E.-E. Kluge60a , P. Kluit109 , S. Kluth103 , J. Knapik42 , E. Kneringer65 , E. B. F. G. Knoops88 , A. Knue103 , A. Kobayashi157 , D. Kobayashi159 , T. Kobayashi157 , M. Kobel47 , M. Kocian145 , P. Kodys131 , T. Koffas31 , E. Koffeman109 , N. M. Köhler103 , T. Koi145 , M. Kolb60b , I. Koletsou5 , A. A. Komar98,* , Y. Komori157 , T. Kondo69 , N. Kondrashova36c , K. Köneke51 , A. C. König108 , T. Kono69,ad , R. Konoplich112,ae , N. Konstantinidis81 , R. Kopeliansky64 , S. Koperny41a , A. K. Kopp51 , K. Korcyl42 , K. Kordas156 , A. Korn81 , A. A. Korol111,c , I. Korolkov13 , E. V. Korolkova141 , O. Kortner103 , S. Kortner103 , T. Kosek131 , V. V. Kostyukhin23 , A. Kotwal48 , A. Koulouris10 , A. Kourkoumeli-Charalampidi123a,123b , C. Kourkoumelis9 , E. Kourlitis141 , V. Kouskoura27 , A. B. Kowalewska42 , R. Kowalewski172 , T. Z. Kowalski41a , C. Kozakai157 , W. Kozanecki138 , A. S. Kozhin132 , V. A. Kramarenko101 , G. Kramberger78 , D. Krasnopevtsev100 , M. W. Krasny83 , A. Krasznahorkay32 , D. Krauss103 , A. Kravchenko27 , J. A. Kremer41a , M. Kretz60c , J. Kretzschmar77 , K. Kreutzfeldt55 , P. Krieger161 , K. Krizka33 , K. Kroeninger46 , H. Kroha103 , J. Kroll129 , J. Kroll124 , J. Kroseberg23 , J. Krstic14 , U. Kruchonak68 , H. Krüger23 , N. Krumnack67 , M. C. Kruse48 , M. Kruskal24 , T. Kubota91 , H. Kucuk81 , S. Kuday4b , J. T. Kuechler178 , S. Kuehn32 , A. Kugel60c , F. Kuger177 , T. Kuhl45 , V. Kukhtin68 , R. Kukla88 , Y. Kulchitsky95 , S. Kuleshov34b , Y. P. Kulinich169 , M. Kuna134a,134b , T. Kunigo71 , A. Kupco129 , O. Kuprash155 , H. Kurashige70 , L. L. Kurchaninov163a , Y. A. Kurochkin95 , M. G. Kurth35a , V. Kus129 , E. S. Kuwertz172 , M. Kuze159 , J. Kvita117 , T. Kwan172 , D. Kyriazopoulos141 , A. La Rosa103 , J. L. La Rosa Navarro26d , L. La Rotonda40a,40b , C. Lacasta170 , F. Lacava134a,134b , J. Lacey45 , H. Lacker17 , D. Lacour83 , E. Ladygin68 , R. Lafaye5 , B. Laforge83 , T. Lagouri179 , S. Lai57 , S. Lammers64 , W. Lampl7 , E. Lançon27 , U. Landgraf51 , M. P. J. Landon79 , M. C. Lanfermann52 , V. S. Lang60a , J. C. Lange13 , A. J. Lankford166 , F. Lanni27 , K. Lantzsch23 , A. Lanza123a , A. Lapertosa53a,53b , S. Laplace83 , J. F. Laporte138 , T. Lari94a , F. Lasagni Manghi22a,22b , M. Lassnig32 , P. Laurelli50 , W. Lavrijsen16 , A. T. Law139 , P. Laycock77 , T. Lazovich59 , M. Lazzaroni94a,94b , B. Le91 , O. Le Dortz83 , E. Le Guirriec88 , E. P. Le Quilleuc138 , M. LeBlanc172 , T. LeCompte6 , F. Ledroit-Guillon58 , C. A. Lee27 , G. R. Lee133,af , S. C. Lee153 , L. Lee59 , B. Lefebvre90 , G. Lefebvre83 , M. Lefebvre172 , F. Legger102 , C. Leggett16 , A. Lehan77 , G. Lehmann Miotto32 , X. Lei7 , W. A. Leight45 , M. A. L. Leite26d , R. Leitner131 , D. Lellouch175 , B. Lemmer57 , K. J. C. Leney81 , T. Lenz23 , B. Lenzi32 , R. Leone7 , S. Leone126a,126b , C. Leonidopoulos49 , G. Lerner151 , C. Leroy97 , A. A. J. Lesage138 , C. G. Lester30 , M. Levchenko125 , J. Levêque5 , D. Levin92 , L. J. Levinson175 , M. Levy19 , D. Lewis79 , B. Li36a,s , C. Li36a , H. Li150 , L. Li48 , L. Li36c , Q. Li35a , S. Li48 , X. Li36c , Y. Li143 , Z. Liang35a , B. Liberti135a , A. Liblong161 , K. Lie169 , J. Liebal23 , W. Liebig15 , A. Limosani152 , S. C. Lin153,ag , T. H. Lin86 , B. E. Lindquist150 , A. E. Lionti52 , E. Lipeles124 , A. Lipniacka15 , M. Lisovyi60b , T. M. Liss169 , A. Lister171 , A. M. Litke139 , B. Liu153,ah , H. Liu92 , H. Liu27 , J. K. K. Liu122 , J. Liu36b , J. B. Liu36a , K. Liu88 , L. Liu169 , M. Liu36a , Y. L. Liu36a , Y. Liu36a , M. Livan123a,123b , A. Lleres58 , J. Llorente Merino35a , S. L. Lloyd79 , C. Y. Lo62b , F. Lo Sterzo153 , E. M. Lobodzinska45 , P. Loch7 , F. K. Loebinger87 , K. M. Loew25 , A. Loginov179,* , T. Lohse17 , K. Lohwasser45 , M. Lokajicek129 , B. A. Long24 , J. D. Long169 , R. E. Long75 , L. Longo76a,76b , K. A. Looper113 , J. A. Lopez34b , D. Lopez Mateos59 , I. Lopez Paz13 , A. Lopez Solis83 , J. Lorenz102 , 123 Eur. Phys. J. C (2017) 77:466 Page 39 of 47 466 N. Lorenzo Martinez5 , M. Losada21 , P. J. Lösel102 , X. Lou35a , A. Lounis119 , J. Love6 , P. A. Love75 , H. Lu62a , N. Lu92 , Y. J. Lu63 , H. J. Lubatti140 , C. Luci134a,134b , A. Lucotte58 , C. Luedtke51 , F. Luehring64 , W. Lukas65 , L. Luminari134a , O. Lundberg148a,148b , B. Lund-Jensen149 , P. M. Luzi83 , D. Lynn27 , R. Lysak129 , E. Lytken84 , V. Lyubushkin68 , H. Ma27 , L. L. Ma36b , Y. Ma36b , G. Maccarrone50 , A. Macchiolo103 , C. M. Macdonald141 , B. Maček78 , J. Machado Miguens124,128b , D. Madaffari88 , R. Madar37 , H. J. Maddocks168 , W. F. Mader47 , A. Madsen45 , J. Maeda70 , S. Maeland15 , T. Maeno27 , A. Maevskiy101 , E. Magradze57 , J. Mahlstedt109 , C. Maiani119 , C. Maidantchik26a , A. A. Maier103 , T. Maier102 , A. Maio128a,128b,128d , S. Majewski118 , Y. Makida69 , N. Makovec119 , B. Malaescu83 , Pa. Malecki42 , V. P. Maleev125 , F. Malek58 , U. Mallik66 , D. Malon6 , C. Malone30 , S. Maltezos10 , S. Malyukov32 , J. Mamuzic170 , G. Mancini50 , I. Mandić78 , J. Maneira128a,128b , L. Manhaes de Andrade Filho26b , J. Manjarres Ramos163b , L. Mandelli94a , 102 32 138 35a 90 A. Mann , A. Manousos , B. Mansoulie , J. D. Mansour , R. Mantifel , M. Mantoani57 , S. Manzoni94a,94b , L. Mapelli32 , G. Marceca29 , L. March52 , L. Marchese122 , G. Marchiori83 , M. Marcisovsky129 , M. Marjanovic37 , D. E. Marley92 , F. Marroquim26a , S. P. Marsden87 , Z. Marshall16 , M. U. F Martensson168 , S. Marti-Garcia170 , C. B. Martin113 , T. A. Martin173 , V. J. Martin49 , B. Martin dit Latour15 , M. Martinez13,v , V. I. Martinez Outschoorn169 , S. Martin-Haugh133 , V. S. Martoiu28b , A. C. Martyniuk81 , A. Marzin115 , L. Masetti86 , T. Mashimo157 , R. Mashinistov98 , J. Masik87 , A. L. Maslennikov111,c , L. Massa135a,135b , P. Mastrandrea5 , A. Mastroberardino40a,40b , T. Masubuchi157 , P. Mättig178 , J. Maurer28b , S. J. Maxfield77 , D. A. Maximov111,c , R. Mazini153 , I. Maznas156 , S. M. Mazza94a,94b , N. C. Mc Fadden107 , G. Mc Goldrick161 , S. P. Mc Kee92 , A. McCarn92 , R. L. McCarthy150 , T. G. McCarthy103 , L. I. McClymont81 , E. F. McDonald91 , J. A. Mcfayden81 , G. Mchedlidze57 , S. J. McMahon133 , P. C. McNamara91 , R. A. McPherson172,o , S. Meehan140 , T. J. Megy51 , S. Mehlhase102 , A. Mehta77 , T. Meideck58 , K. Meier60a , C. Meineck102 , B. Meirose44 , D. Melini170,ai , B. R. Mellado Garcia147c , M. Melo146a , F. Meloni18 , S. B. Menary87 , L. Meng77 , X. T. Meng92 , A. Mengarelli22a,22b , S. Menke103 , E. Meoni165 , S. Mergelmeyer17 , P. Mermod52 , L. Merola106a,106b , C. Meroni94a , F. S. Merritt33 , A. Messina134a,134b , J. Metcalfe6 , A. S. Mete166 , C. Meyer124 , J.-P. Meyer138 , J. Meyer109 , H. Meyer Zu Theenhausen60a , F. Miano151 , R. P. Middleton133 , S. Miglioranzi53a,53b , L. Mijović49 , G. Mikenberg175 , M. Mikestikova129 , M. Mikuž78 , M. Milesi91 , A. Milic27 , D. W. Miller33 , C. Mills49 , A. Milov175 , D. A. Milstead148a,148b , A. A. Minaenko132 , Y. Minami157 , I. A. Minashvili68 , A. I. Mincer112 , B. Mindur41a , M. Mineev68 , Y. Minegishi157 , Y. Ming176 , L. M. Mir13 , K. P. Mistry124 , T. Mitani174 , J. Mitrevski102 , V. A. Mitsou170 , A. Miucci18 , P. S. Miyagawa141 , A. Mizukami69 , J. U. Mjörnmark84 , M. Mlynarikova131 , T. Moa148a,148b , K. Mochizuki97 , P. Mogg51 , S. Mohapatra38 , S. Molander148a,148b , R. Moles-Valls23 , R. Monden71 , M. C. Mondragon93 , K. Mönig45 , J. Monk39 , E. Monnier88 , A. Montalbano150 , J. Montejo Berlingen32 , F. Monticelli74 , S. Monzani94a,94b , R. W. Moore3 , N. Morange119 , D. Moreno21 , M. Moreno Llácer57 , P. Morettini53a , S. Morgenstern32 , D. Mori144 , T. Mori157 , M. Morii59 , M. Morinaga157 , V. Morisbak121 , A. K. Morley152 , G. Mornacchi32 , J. D. Morris79 , L. Morvaj150 , P. Moschovakos10 , M. Mosidze54b , H. J. Moss141 , J. Moss145,aj , K. Motohashi159 , R. Mount145 , E. Mountricha27 , E. J. W. Moyse89 , S. Muanza88 , R. D. Mudd19 , F. Mueller103 , J. Mueller127 , R. S. P. Mueller102 , D. Muenstermann75 , P. Mullen56 , G. A. Mullier18 , F. J. Munoz Sanchez87 , W. J. Murray133,173 , H. Musheghyan57 , M. Muškinja78 , A. G. Myagkov132,ak , M. Myska130 , B. P. Nachman16 , O. Nackenhorst52 , K. Nagai122 , R. Nagai69,ad , K. Nagano69 , Y. Nagasaka61 , K. Nagata164 , M. Nagel51 , E. Nagy88 , A. M. Nairz32 , Y. Nakahama105 , K. Nakamura69 , T. Nakamura157 , I. Nakano114 , R. F. Naranjo Garcia45 , R. Narayan11 , D. I. Narrias Villar60a , I. Naryshkin125 , T. Naumann45 , G. Navarro21 , R. Nayyar7 , H. A. Neal92 , P. Yu. Nechaeva98 , T. J. Neep138 , A. Negri123a,123b , M. Negrini22a , S. Nektarijevic108 , C. Nellist119 , A. Nelson166 , M. E. Nelson122 , S. Nemecek129 , P. Nemethy112 , A. A. Nepomuceno26a , M. Nessi32,al , M. S. Neubauer169 , M. Neumann178 , R. M. Neves112 , P. R. Newman19 , T. Y. Ng62c , T. Nguyen Manh97 , R. B. Nickerson122 , R. Nicolaidou138 , J. Nielsen139 , V. Nikolaenko132,ak , I. Nikolic-Audit83 , K. Nikolopoulos19 , J. K. Nilsen121 , P. Nilsson27 , Y. Ninomiya157 , A. Nisati134a , N. Nishu35c , R. Nisius103 , T. Nobe157 , Y. Noguchi71 , M. Nomachi120 , I. Nomidis31 , M. A. Nomura27 , T. Nooney79 , M. Nordberg32 , N. Norjoharuddeen122 , O. Novgorodova47 , S. Nowak103 , M. Nozaki69 , L. Nozka117 , K. Ntekas166 , E. Nurse81 , F. Nuti91 , K. O’connor25 , D. C. O’Neil144 , A. A. O’Rourke45 , V. O’Shea56 , F. G. Oakham31,d , H. Oberlack103 , T. Obermann23 , J. Ocariz83 , A. Ochi70 , I. Ochoa38 , J. P. Ochoa-Ricoux34a , S. Oda73 , S. Odaka69 , H. Ogren64 , A. Oh87 , S. H. Oh48 , C. C. Ohm16 , H. Ohman168 , H. Oide53a,53b , H. Okawa164 , Y. Okumura157 , T. Okuyama69 , A. Olariu28b , L. F. Oleiro Seabra128a , S. A. Olivares Pino49 , D. Oliveira Damazio27 , A. Olszewski42 , J. Olszowska42 , A. Onofre128a,128e , K. Onogi105 , P. U. E. Onyisi11,z , M. J. Oreglia33 , Y. Oren155 , D. Orestano136a,136b , N. Orlando62b , R. S. Orr161 , B. Osculati53a,53b,* , R. Ospanov87 , G. Otero y Garzon29 , H. Otono73 , M. Ouchrif137d , F. Ould-Saada121 , A. Ouraou138 , K. P. Oussoren109 , Q. Ouyang35a , M. Owen56 , R. E. Owen19 , V. E. Ozcan20a , N. Ozturk8 , K. Pachal144 , A. Pacheco Pages13 , L. Pacheco Rodriguez138 , C. Padilla Aranda13 , S. Pagan Griso16 , M. Paganini179 , F. Paige27 , P. Pais89 , G. Palacino64 , S. Palazzo40a,40b , S. Palestini32 , M. Palka41b , D. Pallin37 , E. St. Panagiotopoulou10 , I. Panagoulias10 , C. E. Pandini83 , J. G. Panduro Vazquez80 , P. Pani32 , S. Panitkin27 , D. Pantea28b , 123 466 Page 40 of 47 Eur. Phys. J. C (2017) 77:466 L. Paolozzi52 , Th. D. Papadopoulou10 , K. Papageorgiou9 , A. Paramonov6 , D. Paredes Hernandez179 , A. J. Parker75 , M. A. Parker30 , K. A. Parker45 , F. Parodi53a,53b , J. A. Parsons38 , U. Parzefall51 , V. R. Pascuzzi161 , J. M. Pasner139 , E. Pasqualucci134a , S. Passaggio53a , Fr. Pastore80 , S. Pataraia178 , J. R. Pater87 , T. Pauly32 , J. Pearce172 , B. Pearson103 , S. Pedraza Lopez170 , R. Pedro128a,128b , S. V. Peleganchuk111,c , O. Penc129 , C. Peng35a , H. Peng36a , J. Penwell64 , B. S. Peralva26b , M. M. Perego138 , D. V. Perepelitsa27 , L. Perini94a,94b , H. Pernegger32 , S. Perrella106a,106b , R. Peschke45 , V. D. Peshekhonov68 , K. Peters45 , R. F. Y. Peters87 , B. A. Petersen32 , T. C. Petersen39 , E. Petit58 , A. Petridis1 , C. Petridou156 , P. Petroff119 , E. Petrolo134a , M. Petrov122 , F. Petrucci136a,136b , N. E. Pettersson89 , A. Peyaud138 , R. Pezoa34b , P. W. Phillips133 , G. Piacquadio150 , E. Pianori173 , A. Picazio89 , E. Piccaro79 , M. A. Pickering122 , R. Piegaia29 , J. E. Pilcher33 , A. D. Pilkington87 , A. W. J. Pin87 , M. Pinamonti167a,167c,am , J. L. Pinfold3 , H. Pirumov45 , M. Pitt175 , L. Plazak146a , M.-A. Pleier27 , V. Pleskot86 , E. Plotnikova68 , D. Pluth67 , P. Podberezko111 , R. Poettgen148a,148b , R. Poggi123a,123b , L. Poggioli119 , D. Pohl23 , G. Polesello123a , A. Poley45 , A. Policicchio40a,40b , R. Polifka32 , A. Polini22a , C. S. Pollard56 , V. Polychronakos27 , K. Pommès32 , D. Ponomarenko100 , L. Pontecorvo134a , B. G. Pope93 , G. A. Popeneciu28d , A. Poppleton32 , S. Pospisil130 , K. Potamianos16 , I. N. Potrap68 , C. J. Potter30 , G. Poulard32 , J. Poveda32 , M. E. Pozo Astigarraga32 , P. Pralavorio88 , A. Pranko16 , S. Prell67 , D. Price87 , L. E. Price6 , M. Primavera76a , S. Prince90 , N. Proklova100 , K. Prokofiev62c , F. Prokoshin34b , S. Protopopescu27 , J. Proudfoot6 , M. Przybycien41a , D. Puddu136a,136b , A. Puri169 , P. Puzo119 , J. Qian92 , G. Qin56 , Y. Qin87 , A. Quadt57 , M. Queitsch-Maitland45 , D. Quilty56 , S. Raddum121 , V. Radeka27 , V. Radescu122 , S. K. Radhakrishnan150 , P. Radloff118 , P. Rados91 , F. Ragusa94a,94b , G. Rahal182 , J. A. Raine87 , S. Rajagopalan27 , C. Rangel-Smith168 , M. G. Ratti94a,94b , D. M. Rauch45 , F. Rauscher102 , S. Rave86 , T. Ravenscroft56 , I. Ravinovich175 , J. H. Rawling87 , M. Raymond32 , A. L. Read121 , N. P. Readioff77 , M. Reale76a,76b , D. M. Rebuzzi123a,123b , A. Redelbach177 , G. Redlinger27 , R. Reece139 , R. G. Reed147c , K. Reeves44 , L. Rehnisch17 , J. Reichert124 , A. Reiss86 , C. Rembser32 , H. Ren35a , M. Rescigno134a , S. Resconi94a , E. D. Resseguie124 , S. Rettie171 , E. Reynolds19 , O. L. Rezanova111,c , P. Reznicek131 , R. Rezvani97 , R. Richter103 , S. Richter81 , E. Richter-Was41b , O. Ricken23 , M. Ridel83 , P. Rieck103 , C. J. Riegel178 , J. Rieger57 , O. Rifki115 , M. Rijssenbeek150 , A. Rimoldi123a,123b , M. Rimoldi18 , L. Rinaldi22a , B. Ristić52 , E. Ritsch32 , I. Riu13 , F. Rizatdinova116 , E. Rizvi79 , C. Rizzi13 , R. T. Roberts87 , S. H. Robertson90,o , A. Robichaud-Veronneau90 , D. Robinson30 , J. E. M. Robinson45 , A. Robson56 , C. Roda126a,126b , Y. Rodina88,an , A. Rodriguez Perez13 , D. Rodriguez Rodriguez170 , S. Roe32 , C. S. Rogan59 , O. Røhne121 , J. Roloff59 , A. Romaniouk100 , M. Romano22a,22b , S. M. Romano Saez37 , E. Romero Adam170 , N. Rompotis77 , M. Ronzani51 , L. Roos83 , S. Rosati134a , K. Rosbach51 , P. Rose139 , N.-A. Rosien57 , V. Rossetti148a,148b , E. Rossi106a,106b , L. P. Rossi53a , J. H. N. Rosten30 , R. Rosten140 , M. Rotaru28b , I. Roth175 , J. Rothberg140 , D. Rousseau119 , A. Rozanov88 , Y. Rozen154 , X. Ruan147c , F. Rubbo145 , F. Rühr51 , A. Ruiz-Martinez31 , Z. Rurikova51 , N. A. Rusakovich68 , A. Ruschke102 , H. L. Russell140 , J. P. Rutherfoord7 , N. Ruthmann32 , Y. F. Ryabov125 , M. Rybar169 , G. Rybkin119 , S. Ryu6 , A. Ryzhov132 , G. F. Rzehorz57 , A. F. Saavedra152 , G. Sabato109 , S. Sacerdoti29 , H. F.-W. Sadrozinski139 , R. Sadykov68 , F. Safai Tehrani134a , P. Saha110 , M. Sahinsoy60a , M. Saimpert45 , M. Saito157 , T. Saito157 , H. Sakamoto157 , Y. Sakurai174 , G. Salamanna136a,136b , J. E. Salazar Loyola34b , D. Salek109 , P. H. Sales De Bruin168 , D. Salihagic103 , A. Salnikov145 , J. Salt170 , D. Salvatore40a,40b , F. Salvatore151 , A. Salvucci62a,62b,62c , A. Salzburger32 , D. Sammel51 , D. Sampsonidis156 , J. Sánchez170 , V. Sanchez Martinez170 , A. Sanchez Pineda167a,167c , H. Sandaker121 , R. L. Sandbach79 , C. O. Sander45 , M. Sandhoff178 , C. Sandoval21 , D. P. C. Sankey133 , M. Sannino53a,53b , A. Sansoni50 , C. Santoni37 , R. Santonico135a,135b , H. Santos128a , I. Santoyo Castillo151 , K. Sapp127 , A. Sapronov68 , J. G. Saraiva128a,128d , B. Sarrazin23 , O. Sasaki69 , K. Sato164 , E. Sauvan5 , G. Savage80 , P. Savard161,d , N. Savic103 , C. Sawyer133 , L. Sawyer82,u , J. Saxon33 , C. Sbarra22a , A. Sbrizzi22a,22b , T. Scanlon81 , D. A. Scannicchio166 , M. Scarcella152 , V. Scarfone40a,40b , J. Schaarschmidt140 , P. Schacht103 , B. M. Schachtner102 , D. Schaefer32 , L. Schaefer124 , R. Schaefer45 , J. Schaeffer86 , S. Schaepe23 , S. Schaetzel60b , U. Schäfer86 , A. C. Schaffer119 , D. Schaile102 , R. D. Schamberger150 , V. Scharf60a , V. A. Schegelsky125 , D. Scheirich131 , M. Schernau166 , C. Schiavi53a,53b , S. Schier139 , L. K. Schildgen23 , C. Schillo51 , M. Schioppa40a,40b , S. Schlenker32 , K. R. Schmidt-Sommerfeld103 , K. Schmieden32 , C. Schmitt86 , S. Schmitt45 , S. Schmitz86 , U. Schnoor51 , A. Schoening60b , B. D. Schoenrock93 , E. Schopf23 , M. Schott86 , J. F. P. Schouwenberg108 , L. Schoeffel138 , 181 52 86 86 23 J. Schovancova , S. Schramm , N. Schuh , A. Schulte , M. J. Schultens , H.-C. Schultz-Coulon60a , H. Schulz17 , M. Schumacher51 , B. A. Schumm139 , Ph. Schune138 , A. Schwartzman145 , T. A. Schwarz92 , H. Schweiger87 , Ph. Schwemling138 , R. Schwienhorst93 , J. Schwindling138 , T. Schwindt23 , A. Sciandra23 , G. Sciolla25 , F. Scuri126a,126b , F. Scutti91 , J. Searcy92 , P. Seema23 , S. C. Seidel107 , A. Seiden139 , J. M. Seixas26a , G. Sekhniaidze106a , K. Sekhon92 , S. J. Sekula43 , N. Semprini-Cesari22a,22b , C. Serfon121 , L. Serin119 , L. Serkin167a,167b , M. Sessa136a,136b , R. Seuster172 , H. Severini115 , T. Sfiligoj78 , F. Sforza32 , A. Sfyrla52 , E. Shabalina57 , N. W. Shaikh148a,148b , L. Y. Shan35a , R. Shang169 , J. T. Shank24 , M. Shapiro16 , P. B. Shatalov99 , K. Shaw167a,167b , S. M. Shaw87 , A. Shcherbakova148a,148b , C. Y. Shehu151 , Y. Shen115 , P. Sherwood81 , L. Shi153,ao , S. Shimizu70 , C. O. Shimmin179 , M. Shimojima104 , S. Shirabe73 , 123 Eur. Phys. J. C (2017) 77:466 Page 41 of 47 466 M. Shiyakova68,ap , J. Shlomi175 , A. Shmeleva98 , D. Shoaleh Saadi97 , M. J. Shochet33 , S. Shojaii94a , D. R. Shope115 , S. Shrestha113 , E. Shulga100 , M. A. Shupe7 , P. Sicho129 , A. M. Sickles169 , P. E. Sidebo149 , E. Sideras Haddad147c , O. Sidiropoulou177 , D. Sidorov116 , A. Sidoti22a,22b , F. Siegert47 , Dj. Sijacki14 , J. Silva128a,128d , S. B. Silverstein148a , V. Simak130 , Lj. Simic14 , S. Simion119 , E. Simioni86 , B. Simmons81 , M. Simon86 , P. Sinervo161 , N. B. Sinev118 , M. Sioli22a,22b , G. Siragusa177 , I. Siral92 , S. Yu. Sivoklokov101 , J. Sjölin148a,148b , M. B. Skinner75 , P. Skubic115 , M. Slater19 , T. Slavicek130 , M. Slawinska109 , K. Sliwa165 , R. Slovak131 , V. Smakhtin175 , B. H. Smart5 , J. Smiesko146a , N. Smirnov100 , S. Yu. Smirnov100 , Y. Smirnov100 , L. N. Smirnova101,aq , O. Smirnova84 , J. W. Smith57 , M. N. K. Smith38 , R. W. Smith38 , M. Smizanska75 , K. Smolek130 , A. A. Snesarev98 , I. M. Snyder118 , S. Snyder27 , R. Sobie172,o , F. Socher47 , A. Soffer155 , D. A. Soh153 , G. Sokhrannyi78 , C. A. Solans Sanchez32 , M. Solar130 , E. Yu. Soldatov100 , U. Soldevila170 , A. A. Solodkov132 , A. Soloshenko68 , O. V. Solovyanov132 , V. Solovyev125 , P. Sommer51 , H. Son165 , H. Y. Song36a,ar , A. Sopczak130 , V. Sorin13 , D. Sosa60b , C. L. Sotiropoulou126a,126b , R. Soualah167a,167c , A. M. Soukharev111,c , D. South45 , B. C. Sowden80 , S. Spagnolo76a,76b , M. Spalla126a,126b , M. Spangenberg173 , F. Spanò80 , D. Sperlich17 , F. Spettel103 , T. M. Spieker60a , R. Spighi22a , G. Spigo32 , L. A. Spiller91 , M. Spousta131 , R. D. St. Denis56,* , A. Stabile94a , R. Stamen60a , S. Stamm17 , E. Stanecka42 , R. W. Stanek6 , C. Stanescu136a , M. M. Stanitzki45 , S. Stapnes121 , E. A. Starchenko132 , G. H. Stark33 , J. Stark58 , S. H Stark39 , P. Staroba129 , P. Starovoitov60a , S. Stärz32 , R. Staszewski42 , P. Steinberg27 , B. Stelzer144 , H. J. Stelzer32 , O. Stelzer-Chilton163a , H. Stenzel55 , G. A. Stewart56 , J. A. Stillings23 , M. C. Stockton118 , M. Stoebe90 , G. Stoicea28b , P. Stolte57 , S. Stonjek103 , A. R. Stradling8 , A. Straessner47 , M. E. Stramaglia18 , J. Strandberg149 , S. Strandberg148a,148b , A. Strandlie121 , M. Strauss115 , P. Strizenec146b , R. Ströhmer177 , D. M. Strom118 , R. Stroynowski43 , A. Strubig108 , S. A. Stucci27 , B. Stugu15 , N. A. Styles45 , D. Su145 , J. Su127 , S. Suchek60a , Y. Sugaya120 , M. Suk130 , V. V. Sulin98 , S. Sultansoy4c , T. Sumida71 , S. Sun59 , X. Sun3 , K. Suruliz151 , C. J. E. Suster152 , M. R. Sutton151 , S. Suzuki69 , M. Svatos129 , M. Swiatlowski33 , S. P. Swift2 , I. Sykora146a , T. Sykora131 , D. Ta51 , K. Tackmann45 , J. Taenzer155 , A. Taffard166 , R. Tafirout163a , N. Taiblum155 , H. Takai27 , R. Takashima72 , T. Takeshita142 , Y. Takubo69 , M. Talby88 , A. A. Talyshev111,c , J. Tanaka157 , M. Tanaka159 , R. Tanaka119 , S. Tanaka69 , R. Tanioka70 , B. B. Tannenwald113 , S. Tapia Araya34b , S. Tapprogge86 , S. Tarem154 , G. F. Tartarelli94a , P. Tas131 , M. Tasevsky129 , T. Tashiro71 , E. Tassi40a,40b , A. Tavares Delgado128a,128b , Y. Tayalati137e , A. C. Taylor107 , G. N. Taylor91 , P. T. E. Taylor91 , W. Taylor163b , P. Teixeira-Dias80 , D. Temple144 , H. Ten Kate32 , P. K. Teng153 , J. J. Teoh120 , F. Tepel178 , S. Terada69 , K. Terashi157 , J. Terron85 , S. Terzo13 , M. Testa50 , R. J. Teuscher161,o , T. Theveneaux-Pelzer88 , J. P. Thomas19 , J. Thomas-Wilsker80 , P. D. Thompson19 , A. S. Thompson56 , L. A. Thomsen179 , E. Thomson124 , M. J. Tibbetts16 , R. E. Ticse Torres88 , Yu. A. Tikhonov111,c , S. Timoshenko100 , P. Tipton179 , S. Tisserant88 , K. Todome159 , V. O. Tikhomirov98,as , 5 73 146a 69 59 87 105 , K. Tokushuku , E. Tolley , L. Tomlinson , M. Tomoto , L. Tompkins145,at , S. Todorova-Nova , J. Tojo , S. Tokár K. Toms107 , B. Tong59 , P. Tornambe51 , E. Torrence118 , H. Torres144 , E. Torró Pastor140 , J. Toth88,au , F. Touchard88 , D. R. Tovey141 , C. J. Treado112 , T. Trefzger177 , F. Tresoldi151 , A. Tricoli27 , I. M. Trigger163a , S. Trincaz-Duvoid83 , M. F. Tripiana13 , W. Trischuk161 , B. Trocmé58 , A. Trofymov45 , C. Troncon94a , M. Trottier-McDonald16 , M. Trovatelli172 , L. Truong167a,167c , M. Trzebinski42 , A. Trzupek42 , K. W. Tsang62a , J. C.-L. Tseng122 , P. V. Tsiareshka95 , G. Tsipolitis10 , N. Tsirintanis9 , S. Tsiskaridze13 , V. Tsiskaridze51 , E. G. Tskhadadze54a , K. M. Tsui62a , I. I. Tsukerman99 , V. Tsulaia16 , S. Tsuno69 , D. Tsybychev150 , Y. Tu62b , A. Tudorache28b , V. Tudorache28b , T. T. Tulbure28a , A. N. Tuna59 , S. A. Tupputi22a,22b , S. Turchikhin68 , D. Turgeman175 , I. Turk Cakir4b,av , R. Turra94a,94b , P. M. Tuts38 , G. Ucchielli22a,22b , I. Ueda69 , M. Ughetto148a,148b , F. Ukegawa164 , G. Unal32 , A. Undrus27 , G. Unel166 , F. C. Ungaro91 , Y. Unno69 , C. Unverdorben102 , J. Urban146b , P. Urquijo91 , P. Urrejola86 , G. Usai8 , J. Usui69 , L. Vacavant88 , V. Vacek130 , B. Vachon90 , C. Valderanis102 , E. Valdes Santurio148a,148b , N. Valencic109 , S. Valentinetti22a,22b , A. Valero170 , L. Valéry13 , S. Valkar131 , A. Vallier5 , J. A. Valls Ferrer170 , W. Van Den Wollenberg109 , H. van der Graaf109 , N. van Eldik154 , P. van Gemmeren6 , J. Van Nieuwkoop144 , I. van Vulpen109 , M. C. van Woerden109 , M. Vanadia134a,134b , W. Vandelli32 , R. Vanguri124 , A. Vaniachine160 , P. Vankov109 , G. Vardanyan180 , R. Vari134a , E. W. Varnes7 , C. Varni53a,53b , T. Varol43 , D. Varouchas119 , A. Vartapetian8 , K. E. Varvell152 , J. G. Vasquez179 , G. A. Vasquez34b , F. Vazeille37 , T. Vazquez Schroeder90 , J. Veatch57 , V. Veeraraghavan7 , L. M. Veloce161 , F. Veloso128a,128c , T. Velz23 , S. Veneziano134a , A. Ventura76a,76b , M. Venturi172 , N. Venturi161 , A. Venturini25 , V. Vercesi123a , M. Verducci136a,136b , W. Verkerke109 , J. C. Vermeulen109 , M. C. Vetterli144,d , N. Viaux Maira34b , O. Viazlo84 , I. Vichou169,* , T. Vickey141 , O. E. Vickey Boeriu141 , G. H. A. Viehhauser122 , S. Viel16 , L. Vigani122 , M. Villa22a,22b , M. Villaplana Perez94a,94b , E. Vilucchi50 , M. G. Vincter31 , V. B. Vinogradov68 , A. Vishwakarma45 , C. Vittori22a,22b , I. Vivarelli151 , S. Vlachos10 , M. Vlasak130 , M. Vogel178 , P. Vokac130 , G. Volpi126a,126b , H. von der Schmitt103 , E. von Toerne23 , V. Vorobel131 , K. Vorobev100 , M. Vos170 , R. Voss32 , J. H. Vossebeld77 , N. Vranjes14 , M. Vranjes Milosavljevic14 , V. Vrba130 , M. Vreeswijk109 , R. Vuillermet32 , I. Vukotic33 , P. Wagner23 , W. Wagner178 , J. Wagner-Kuhr102 , H. Wahlberg74 , S. Wahrmund47 , J. Wakabayashi105 , J. Walder75 , R. Walker102 , W. Walkowiak143 , V. Wallangen148a,148b , C. Wang35b , C. Wang36b,aw , F. Wang176 , H. Wang16 , H. Wang3 , J. Wang45 , 123 466 Page 42 of 47 Eur. Phys. J. C (2017) 77:466 J. Wang152 , Q. Wang115 , R. Wang6 , S. M. Wang153 , T. Wang38 , W. Wang153,ax , W. Wang36a , Z. Wang36c , C. Wanotayaroj118 , A. Warburton90 , C. P. Ward30 , D. R. Wardrope81 , A. Washbrook49 , P. M. Watkins19 , A. T. Watson19 , M. F. Watson19 , G. Watts140 , S. Watts87 , B. M. Waugh81 , A. F. Webb11 , S. Webb86 , M. S. Weber18 , S. W. Weber177 , S. A. Weber31 , J. S. Webster6 , A. R. Weidberg122 , B. Weinert64 , J. Weingarten57 , C. Weiser51 , H. Weits109 , P. S. Wells32 , T. Wenaus27 , T. Wengler32 , S. Wenig32 , N. Wermes23 , M. D. Werner67 , P. Werner32 , M. Wessels60a , K. Whalen118 , N. L. Whallon140 , A. M. Wharton75 , A. White8 , M. J. White1 , R. White34b , D. Whiteson166 , F. J. Wickens133 , W. Wiedenmann176 , M. Wielers133 , C. Wiglesworth39 , L. A. M. Wiik-Fuchs23 , A. Wildauer103 , F. Wilk87 , H. G. Wilkens32 , H. H. Williams124 , S. Williams109 , C. Willis93 , S. Willocq89 , J. A. Wilson19 , I. Wingerter-Seez5 , F. Winklmeier118 , O. J. Winston151 , B. T. Winter23 , M. Wittgen145 , M. Wobisch82,u , T. M. H. Wolf109 , R. Wolff88 , M. W. Wolter42 , H. Wolters128a,128c , S. D. Worm19 , B. K. Wosiek42 , J. Wotschack32 , M. J. Woudstra87 , K. W. Wozniak42 , M. Wu33 , S. L. Wu176 , X. Wu52 , Y. Wu92 , T. R. Wyatt87 , B. M. Wynne49 , S. Xella39 , Z. Xi92 , L. Xia35c , D. Xu35a , L. Xu27 , B. Yabsley152 , S. Yacoob147a , D. Yamaguchi159 , Y. Yamaguchi120 , A. Yamamoto69 , S. Yamamoto157 , T. Yamanaka157 , K. Yamauchi105 , Y. Yamazaki70 , Z. Yan24 , H. Yang36c , H. Yang16 , Y. Yang153 , Z. Yang15 , W.-M. Yao16 , Y. C. Yap83 , Y. Yasu69 , E. Yatsenko5 , K. H. Yau Wong23 , J. Ye43 , S. Ye27 , I. Yeletskikh68 , E. Yigitbasi24 , E. Yildirim86 , K. Yorita174 , K. Yoshihara124 , C. Young145 , C. J. S. Young32 , S. Youssef24 , D. R. Yu16 , J. Yu8 , J. Yu67 , L. Yuan70 , S. P. Y. Yuen23 , I. Yusuff30,ay , B. Zabinski42 , G. Zacharis10 , R. Zaidan13 , A. M. Zaitsev132,ak , N. Zakharchuk45 , J. Zalieckas15 , A. Zaman150 , S. Zambito59 , D. Zanzi91 , C. Zeitnitz178 , M. Zeman130 , A. Zemla41a , J. C. Zeng169 , Q. Zeng145 , O. Zenin132 , T. Ženiš146a , D. Zerwas119 , D. Zhang92 , F. Zhang176 , G. Zhang36a,ar , H. Zhang35b , J. Zhang6 , L. Zhang51 , L. Zhang36a , M. Zhang169 , R. Zhang23 , R. Zhang36a,aw , X. Zhang36b , Y. Zhang35a , Z. Zhang119 , X. Zhao43 , Y. Zhao36b,az , Z. Zhao36a , A. Zhemchugov68 , J. Zhong122 , B. Zhou92 , C. Zhou176 , L. Zhou43 , M. Zhou35a , M. Zhou150 , N. Zhou35c , C. G. Zhu36b , H. Zhu35a , J. Zhu92 , Y. Zhu36a , X. Zhuang35a , K. Zhukov98 , A. Zibell177 , D. Zieminska64 , N. I. Zimine68 , C. Zimmermann86 , S. Zimmermann51 , Z. Zinonos103 , M. Zinser86 , M. Ziolkowski143 , L. Živković14 , G. Zobernig176 , A. Zoccoli22a,22b , R. Zou33 , M. zur Nedden17 , L. Zwalinski32 1 Department of Physics, University of Adelaide, Adelaide, Australia 2 Physics Department, SUNY Albany, Albany, NY, USA 3 Department of Physics, University of Alberta, Edmonton, AB, Canada 4 (a) Department of Physics, Ankara University, Ankara, Turkey; (b) Istanbul Aydin University, Istanbul, Turkey; (c) Division of Physics, TOBB University of Economics and Technology, Ankara, Turkey 5 LAPP, CNRS/IN2P3 and Université Savoie Mont Blanc, Annecy-le-Vieux, France 6 High Energy Physics Division, Argonne National Laboratory, Argonne, IL, USA 7 Department of Physics, University of Arizona, Tucson, AZ, USA 8 Department of Physics, The University of Texas at Arlington, Arlington, TX, USA 9 Physics Department, National and Kapodistrian University of Athens, Athens, Greece 10 Physics Department, National Technical University of Athens, Zografou, Greece 11 Department of Physics, The University of Texas at Austin, Austin, TX, USA 12 Institute of Physics, Azerbaijan Academy of Sciences, Baku, Azerbaijan 13 Institut de Física d’Altes Energies (IFAE), The Barcelona Institute of Science and Technology, Barcelona, Spain 14 Institute of Physics, University of Belgrade, Belgrade, Serbia 15 Department for Physics and Technology, University of Bergen, Bergen, Norway 16 Physics Division, Lawrence Berkeley National Laboratory and University of California, Berkeley, CA, USA 17 Department of Physics, Humboldt University, Berlin, Germany 18 Albert Einstein Center for Fundamental Physics and Laboratory for High Energy Physics, University of Bern, Bern, Switzerland 19 School of Physics and Astronomy, University of Birmingham, Birmingham, UK 20 (a) Department of Physics, Bogazici University, Istanbul, Turkey; (b) Department of Physics Engineering, Gaziantep University, Gaziantep, Turkey; (c) Faculty of Engineering and Natural Sciences, Istanbul Bilgi University, Istanbul, Turkey; (d) Faculty of Engineering and Natural Sciences, Bahcesehir University, Istanbul, Turkey 21 Centro de Investigaciones, Universidad Antonio Narino, Bogotá, Colombia 22 (a) INFN Sezione di Bologna, Bologna, Italy; (b) Dipartimento di Fisica e Astronomia, Università di Bologna, Bologna, Italy 23 Physikalisches Institut, University of Bonn, Bonn, Germany 24 Department of Physics, Boston University, Boston, MA, USA 123 Eur. Phys. J. C (2017) 77:466 Page 43 of 47 466 25 Department of Physics, Brandeis University, Waltham, MA, USA 26 (a) Universidade Federal do Rio De Janeiro COPPE/EE/IF, Rio de Janeiro, Brazil; (b) Electrical Circuits Department, Federal University of Juiz de Fora (UFJF), Juiz de Fora, Brazil; (c) Federal University of Sao Joao del Rei (UFSJ), Sao Joao del Rei, Brazil; (d) Instituto de Fisica, Universidade de Sao Paulo, Sao Paulo, Brazil 27 Physics Department, Brookhaven National Laboratory, Upton, NY, USA 28 (a) Transilvania University of Brasov, Brasov, Romania; (b) Horia Hulubei National Institute of Physics and Nuclear Engineering, Bucharest, Romania; (c) Department of Physics, Alexandru Ioan Cuza University of Iasi, Iasi, Romania; (d) Physics Department, National Institute for Research and Development of Isotopic and Molecular Technologies, Cluj Napoca, Romania; (e) University Politehnica Bucharest, Bucharest, Romania; (f) West University in Timisoara, Timisoara, Romania 29 Departamento de Física, Universidad de Buenos Aires, Buenos Aires, Argentina 30 Cavendish Laboratory, University of Cambridge, Cambridge, UK 31 Department of Physics, Carleton University, Ottawa, ON, Canada 32 CERN, Geneva, Switzerland 33 Enrico Fermi Institute, University of Chicago, Chicago, IL, USA 34 (a) Departamento de Física, Pontificia Universidad Católica de Chile, Santiago, Chile; (b) Departamento de Física, Universidad Técnica Federico Santa María, Valparaiso, Chile 35 (a) Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, China; (b) Department of Physics, Nanjing University, Nanjing, Jiangsu, China; (c) Physics Department, Tsinghua University, Beijing 100084, China 36 (a) Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui, China; (b) School of Physics, Shandong University, Jinan, Shandong, China; (c) Department of Physics and Astronomy, Key Laboratory for Particle Physics, Astrophysics and Cosmology, Ministry of Education, Shanghai Key Laboratory for Particle Physics and Cosmology, Shanghai Jiao Tong University, Shanghai (also at PKU-CHEP), Shanghai, China 37 Université Clermont Auvergne, CNRS/IN2P3, LPC, Clermont-Ferrand, France 38 Nevis Laboratory, Columbia University, Irvington, NY, USA 39 Niels Bohr Institute, University of Copenhagen, Copenhagen, Denmark 40 (a) INFN Gruppo Collegato di Cosenza, Laboratori Nazionali di Frascati, Frascati, Italy; (b) Dipartimento di Fisica, Università della Calabria, Rende, Italy 41 (a) Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, Kraków, Poland; (b) Marian Smoluchowski Institute of Physics, Jagiellonian University, Kraków, Poland 42 Institute of Nuclear Physics, Polish Academy of Sciences, Kraków, Poland 43 Physics Department, Southern Methodist University, Dallas, TX, USA 44 Physics Department, University of Texas at Dallas, Richardson, TX, USA 45 DESY, Hamburg, Zeuthen, Germany 46 Lehrstuhl für Experimentelle Physik IV, Technische Universität Dortmund, Dortmund, Germany 47 Institut für Kern- und Teilchenphysik, Technische Universität Dresden, Dresden, Germany 48 Department of Physics, Duke University, Durham, NC, USA 49 SUPA-School of Physics and Astronomy, University of Edinburgh, Edinburgh, UK 50 INFN Laboratori Nazionali di Frascati, Frascati, Italy 51 Fakultät für Mathematik und Physik, Albert-Ludwigs-Universität, Freiburg, Germany 52 Departement de Physique Nucleaire et Corpusculaire, Université de Genève, Geneva, Switzerland 53 (a) INFN Sezione di Genova, Genoa, Italy; (b) Dipartimento di Fisica, Università di Genova, Genoa, Italy 54 (a) E. Andronikashvili Institute of Physics, Iv. Javakhishvili Tbilisi State University, Tbilisi, Georgia; (b) High Energy Physics Institute, Tbilisi State University, Tbilisi, Georgia 55 II Physikalisches Institut, Justus-Liebig-Universität Giessen, Giessen, Germany 56 SUPA-School of Physics and Astronomy, University of Glasgow, Glasgow, UK 57 II Physikalisches Institut, Georg-August-Universität, Göttingen, Germany 58 Laboratoire de Physique Subatomique et de Cosmologie, Université Grenoble-Alpes, CNRS/IN2P3, Grenoble, France 59 Laboratory for Particle Physics and Cosmology, Harvard University, Cambridge, MA, USA 60 (a) Kirchhoff-Institut für Physik, Ruprecht-Karls-Universität Heidelberg, Heidelberg, Germany; (b) Physikalisches Institut, Ruprecht-Karls-Universität Heidelberg, Heidelberg, Germany; (c) ZITI Institut für technische Informatik, Ruprecht-Karls-Universität Heidelberg, Mannheim, Germany 61 Faculty of Applied Information Science, Hiroshima Institute of Technology, Hiroshima, Japan 123 466 Page 44 of 47 Eur. Phys. J. C (2017) 77:466 62 (a) Department of Physics, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong; (b) Department of Physics, The University of Hong Kong, Hong Kong, China; (c) Department of Physics and Institute for Advanced Study, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China 63 Department of Physics, National Tsing Hua University, Hsinchu City, Taiwan 64 Department of Physics, Indiana University, Bloomington, IN, USA 65 Institut für Astro- und Teilchenphysik, Leopold-Franzens-Universität, Innsbruck, Austria 66 University of Iowa, Iowa City, IA, USA 67 Department of Physics and Astronomy, Iowa State University, Ames, IA, USA 68 Joint Institute for Nuclear Research, JINR Dubna, Dubna, Russia 69 KEK, High Energy Accelerator Research Organization, Tsukuba, Japan 70 Graduate School of Science, Kobe University, Kobe, Japan 71 Faculty of Science, Kyoto University, Kyoto, Japan 72 Kyoto University of Education, Kyoto, Japan 73 Research Center for Advanced Particle Physics and Department of Physics, Kyushu University, Fukuoka, Japan 74 Instituto de Física La Plata, Universidad Nacional de La Plata and CONICET, La Plata, Argentina 75 Physics Department, Lancaster University, Lancaster, UK 76 (a) INFN Sezione di Lecce, Lecce, Italy; (b) Dipartimento di Matematica e Fisica, Università del Salento, Lecce, Italy 77 Oliver Lodge Laboratory, University of Liverpool, Liverpool, UK 78 Department of Experimental Particle Physics, Jožef Stefan Institute and Department of Physics, University of Ljubljana, Ljubljana, Slovenia 79 School of Physics and Astronomy, Queen Mary University of London, London, UK 80 Department of Physics, Royal Holloway University of London, Surrey, UK 81 Department of Physics and Astronomy, University College London, London, UK 82 Louisiana Tech University, Ruston, LA, USA 83 Laboratoire de Physique Nucléaire et de Hautes Energies, UPMC and Université Paris-Diderot and CNRS/IN2P3, Paris, France 84 Fysiska institutionen, Lunds universitet, Lund, Sweden 85 Departamento de Fisica Teorica C-15, Universidad Autonoma de Madrid, Madrid, Spain 86 Institut für Physik, Universität Mainz, Mainz, Germany 87 School of Physics and Astronomy, University of Manchester, Manchester, UK 88 CPPM, Aix-Marseille Université and CNRS/IN2P3, Marseille, France 89 Department of Physics, University of Massachusetts, Amherst, MA, USA 90 Department of Physics, McGill University, Montreal, QC, Canada 91 School of Physics, University of Melbourne, Victoria, Australia 92 Department of Physics, The University of Michigan, Ann Arbor, MI, USA 93 Department of Physics and Astronomy, Michigan State University, East Lansing, MI, USA 94 (a) INFN Sezione di Milano, Milan, Italy; (b) Dipartimento di Fisica, Università di Milano, Milan, Italy 95 B.I. Stepanov Institute of Physics, National Academy of Sciences of Belarus, Minsk, Republic of Belarus 96 Research Institute for Nuclear Problems of Byelorussian State University, Minsk, Republic of Belarus 97 Group of Particle Physics, University of Montreal, Montreal, QC, Canada 98 P.N. Lebedev Physical Institute of the Russian Academy of Sciences, Moscow, Russia 99 Institute for Theoretical and Experimental Physics (ITEP), Moscow, Russia 100 National Research Nuclear University MEPhI, Moscow, Russia 101 D.V. Skobeltsyn Institute of Nuclear Physics, M.V. Lomonosov Moscow State University, Moscow, Russia 102 Fakultät für Physik, Ludwig-Maximilians-Universität München, München, Germany 103 Max-Planck-Institut für Physik (Werner-Heisenberg-Institut), Munich, Germany 104 Nagasaki Institute of Applied Science, Nagasaki, Japan 105 Graduate School of Science and Kobayashi-Maskawa Institute, Nagoya University, Nagoya, Japan 106 (a) INFN Sezione di Napoli, Naples, Italy; (b) Dipartimento di Fisica, Università di Napoli, Naples, Italy 107 Department of Physics and Astronomy, University of New Mexico, Albuquerque, NM, USA 108 Institute for Mathematics, Astrophysics and Particle Physics, Radboud University Nijmegen/Nikhef, Nijmegen, The Netherlands 109 Nikhef National Institute for Subatomic Physics and University of Amsterdam, Amsterdam, The Netherlands 123 Eur. Phys. J. C (2017) 77:466 Page 45 of 47 466 110 Department of Physics, Northern Illinois University, DeKalb, IL, USA 111 Budker Institute of Nuclear Physics, SB RAS, Novosibirsk, Russia 112 Department of Physics, New York University, New York, NY, USA 113 Ohio State University, Columbus, OH, USA 114 Faculty of Science, Okayama University, Okayama, Japan 115 Homer L. Dodge Department of Physics and Astronomy, University of Oklahoma, Norman, OK, USA 116 Department of Physics, Oklahoma State University, Stillwater, OK, USA 117 Palacký University, RCPTM, Olomouc, Czech Republic 118 Center for High Energy Physics, University of Oregon, Eugene, OR, USA 119 LAL, Univ. Paris-Sud, CNRS/IN2P3, Université Paris-Saclay, Orsay, France 120 Graduate School of Science, Osaka University, Osaka, Japan 121 Department of Physics, University of Oslo, Oslo, Norway 122 Department of Physics, Oxford University, Oxford, UK 123 (a) INFN Sezione di Pavia, Pavia, Italy; (b) Dipartimento di Fisica, Università di Pavia, Pavia, Italy 124 Department of Physics, University of Pennsylvania, Philadelphia, PA, USA 125 National Research Centre “Kurchatov Institute” B.P. Konstantinov Petersburg Nuclear Physics Institute, St. Petersburg, Russia 126 (a) INFN Sezione di Pisa, Pisa, Italy; (b) Dipartimento di Fisica E. Fermi, Università di Pisa, Pisa, Italy 127 Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA, USA 128 (a) Laboratório de Instrumentação e Física Experimental de Partículas-LIP, Lisbon, Portugal; (b) Faculdade de Ciências, Universidade de Lisboa, Lisbon, Portugal; (c) Department of Physics, University of Coimbra, Coimbra, Portugal; (d) Centro de Física Nuclear da Universidade de Lisboa, Lisbon, Portugal; (e) Departamento de Fisica, Universidade do Minho, Braga, Portugal; (f) Departamento de Fisica Teorica y del Cosmos and CAFPE, Universidad de Granada, Granada, Spain; (g) Dep Fisica and CEFITEC of Faculdade de Ciencias e Tecnologia, Universidade Nova de Lisboa, Caparica, Lisbon, Portugal 129 Institute of Physics, Academy of Sciences of the Czech Republic, Prague, Czech Republic 130 Czech Technical University in Prague, Prague, Czech Republic 131 Faculty of Mathematics and Physics, Charles University, Prague, Czech Republic 132 State Research Center Institute for High Energy Physics (Protvino), NRC KI, Protvino, Russia 133 Particle Physics Department, Rutherford Appleton Laboratory, Didcot, UK 134 (a) INFN Sezione di Roma, Rome, Italy; (b) Dipartimento di Fisica, Sapienza Università di Roma, Rome, Italy 135 (a) INFN Sezione di Roma Tor Vergata, Rome, Italy; (b) Dipartimento di Fisica, Università di Roma Tor Vergata, Rome, Italy 136 (a) INFN Sezione di Roma Tre, Rome, Italy; (b) Dipartimento di Matematica e Fisica, Università Roma Tre, Rome, Italy 137 (a) Faculté des Sciences Ain Chock, Réseau Universitaire de Physique des Hautes Energies-Université Hassan II, Casablanca, Morocco; (b) Centre National de l’Energie des Sciences Techniques Nucleaires, Rabat, Morocco; (c) Faculté des Sciences Semlalia, Université Cadi Ayyad, LPHEA-Marrakech, Marrakech, Morocco; (d) Faculté des Sciences, Université Mohamed Premier and LPTPM, Oujda, Morocco; (e) Faculté des Sciences, Université Mohammed V, Rabat, Morocco 138 DSM/IRFU (Institut de Recherches sur les Lois Fondamentales de l’Univers), CEA Saclay (Commissariat à l’Energie Atomique et aux Energies Alternatives), Gif-sur-Yvette, France 139 Santa Cruz Institute for Particle Physics, University of California Santa Cruz, Santa Cruz, CA, USA 140 Department of Physics, University of Washington, Seattle, WA, USA 141 Department of Physics and Astronomy, University of Sheffield, Sheffield, UK 142 Department of Physics, Shinshu University, Nagano, Japan 143 Department Physik, Universität Siegen, Siegen, Germany 144 Department of Physics, Simon Fraser University, Burnaby, BC, Canada 145 SLAC National Accelerator Laboratory, Stanford, CA, USA 146 (a) Faculty of Mathematics, Physics and Informatics, Comenius University, Bratislava, Slovak Republic; (b) Department of Subnuclear Physics, Institute of Experimental Physics of the Slovak Academy of Sciences, Kosice, Slovak Republic 147 (a) Department of Physics, University of Cape Town, Cape Town, South Africa; (b) Department of Physics, University of Johannesburg, Johannesburg, South Africa; (c) School of Physics, University of the Witwatersrand, Johannesburg, South Africa 123 466 Page 46 of 47 Eur. Phys. J. C (2017) 77:466 148 (a) Department of Physics, Stockholm University, Stockholm, Sweden; (b) The Oskar Klein Centre, Stockholm, Sweden 149 Physics Department, Royal Institute of Technology, Stockholm, Sweden 150 Departments of Physics and Astronomy and Chemistry, Stony Brook University, Stony Brook, NY, USA 151 Department of Physics and Astronomy, University of Sussex, Brighton, UK 152 School of Physics, University of Sydney, Sydney, Australia 153 Institute of Physics, Academia Sinica, Taipei, Taiwan 154 Department of Physics, Technion: Israel Institute of Technology, Haifa, Israel 155 Raymond and Beverly Sackler School of Physics and Astronomy, Tel Aviv University, Tel Aviv, Israel 156 Department of Physics, Aristotle University of Thessaloniki, Thessaloníki, Greece 157 International Center for Elementary Particle Physics and Department of Physics, The University of Tokyo, Tokyo, Japan 158 Graduate School of Science and Technology, Tokyo Metropolitan University, Tokyo, Japan 159 Department of Physics, Tokyo Institute of Technology, Tokyo, Japan 160 Tomsk State University, Tomsk, Russia 161 Department of Physics, University of Toronto, Toronto, ON, Canada 162 (a) INFN-TIFPA, Trento, Italy; (b) University of Trento, Trento, Italy 163 (a) TRIUMF, Vancouver, BC, Canada; (b) Department of Physics and Astronomy, York University, Toronto, ON, Canada 164 Faculty of Pure and Applied Sciences, and Center for Integrated Research in Fundamental Science and Engineering, University of Tsukuba, Tsukuba, Japan 165 Department of Physics and Astronomy, Tufts University, Medford, MA, USA 166 Department of Physics and Astronomy, University of California Irvine, Irvine, CA, USA 167 (a) INFN Gruppo Collegato di Udine, Sezione di Trieste, Udine, Italy; (b) ICTP, Trieste, Italy; (c) Dipartimento di Chimica, Fisica e Ambiente, Università di Udine, Udine, Italy 168 Department of Physics and Astronomy, University of Uppsala, Uppsala, Sweden 169 Department of Physics, University of Illinois, Urbana, IL, USA 170 Instituto de Fisica Corpuscular (IFIC) and Departamento de Fisica Atomica, Molecular y Nuclear and Departamento de Ingeniería Electrónica and Instituto de Microelectrónica de Barcelona (IMB-CNM), University of Valencia and CSIC, Valencia, Spain 171 Department of Physics, University of British Columbia, Vancouver, BC, Canada 172 Department of Physics and Astronomy, University of Victoria, Victoria, BC, Canada 173 Department of Physics, University of Warwick, Coventry, UK 174 Waseda University, Tokyo, Japan 175 Department of Particle Physics, The Weizmann Institute of Science, Rehovot, Israel 176 Department of Physics, University of Wisconsin, Madison, WI, USA 177 Fakultät für Physik und Astronomie, Julius-Maximilians-Universität, Würzburg, Germany 178 Fakultät für Mathematik und Naturwissenschaften, Fachgruppe Physik, Bergische Universität Wuppertal, Wuppertal, Germany 179 Department of Physics, Yale University, New Haven, CT, USA 180 Yerevan Physics Institute, Yerevan, Armenia 181 1211, Geneva 23, Switzerland 182 Centre de Calcul de l’Institut National de Physique Nucléaire et de Physique des Particules (IN2P3), Villeurbanne, France a Also at Department of Physics, King’s College London, London, UK b Also at Institute of Physics, Azerbaijan Academy of Sciences, Baku, Azerbaijan c Also at Novosibirsk State University, Novosibirsk, Russia d Also at TRIUMF, Vancouver, BC, Canada e Also at Department of Physics and Astronomy, University of Louisville, Louisville, KY, USA f Also at Physics Department, An-Najah National University, Nablus, Palestine g Also at Department of Physics, California State University, Fresno CA, USA h Also at Department of Physics, University of Fribourg, Fribourg, Switzerland i Also at II Physikalisches Institut, Georg-August-Universität, Göttingen, Germany j Also at Departament de Fisica de la Universitat Autonoma de Barcelona, Barcelona, Spain k Also at Departamento de Fisica e Astronomia, Faculdade de Ciencias, Universidade do Porto, Portugal l Also at Tomsk State University, Tomsk, Russia 123 Eur. Phys. J. C (2017) 77:466 Page 47 of 47 466 m Also at The Collaborative Innovation Center of Quantum Matter (CICQM), Beijing, China n Also at Universita di Napoli Parthenope, Naples, Italy o Also at Institute of Particle Physics (IPP), Vancouver, Canada p Also at Horia Hulubei National Institute of Physics and Nuclear Engineering, Bucharest, Romania q Also at Department of Physics, St. Petersburg State Polytechnical University, St. Petersburg, Russia r Also at Borough of Manhattan Community College, City University of New York, New York, USA s Also at Department of Physics, The University of Michigan, Ann Arbor MI, USA t Also at Centre for High Performance Computing, CSIR Campus, Rosebank, Cape Town, South Africa u Also at Louisiana Tech University, Ruston, LA, USA v Also at Institucio Catalana de Recerca i Estudis Avancats, ICREA, Barcelona, Spain w Also at Graduate School of Science, Osaka University, Osaka, Japan x Also at Fakultät für Mathematik und Physik, Albert-Ludwigs-Universität, Freiburg, Germany y Also at Institute for Mathematics, Astrophysics and Particle Physics, Radboud University Nijmegen/Nikhef, Nijmegen, The Netherlands z Also at Department of Physics, The University of Texas at Austin, Austin, TX, USA aa Also at Institute of Theoretical Physics, Ilia State University, Tbilisi, Georgia ab Also at CERN, Geneva, Switzerland ac Also at Georgian Technical University (GTU), Tbilisi, Georgia ad Also at Ochadai Academic Production, Ochanomizu University, Tokyo, Japan ae Also at Manhattan College, New York, NY, USA af Also at Departamento de Física, Pontificia Universidad Católica de Chile, Santiago, Chile ag Also at Academia Sinica Grid Computing, Institute of Physics, Academia Sinica, Taipei, Taiwan ah Also at School of Physics, Shandong University, Shandong, China ai Also at Departamento de Fisica Teorica y del Cosmos and CAFPE, Universidad de Granada, Granada (Spain), Portugal aj Also at Department of Physics, California State University, Sacramento, CA, USA ak Also at Moscow Institute of Physics and Technology State University, Dolgoprudny, Russia al Also at Departement de Physique Nucleaire et Corpusculaire, Université de Genève, Geneva, Switzerland am Also at International School for Advanced Studies (SISSA), Trieste, Italy an Also at Institut de Física d’Altes Energies (IFAE), The Barcelona Institute of Science and Technology, Barcelona, Spain ao Also at School of Physics, Sun Yat-sen University, Guangzhou, China ap Also at Institute for Nuclear Research and Nuclear Energy (INRNE) of the Bulgarian Academy of Sciences, Sofia, Bulgaria aq Also at Faculty of Physics, M.V. Lomonosov Moscow State University, Moscow, Russia ar Also at Institute of Physics, Academia Sinica, Taipei, Taiwan as Also at National Research Nuclear University MEPhI, Moscow, Russia at Also at Department of Physics, Stanford University, Stanford, CA, USA au Also at Institute for Particle and Nuclear Physics, Wigner Research Centre for Physics, Budapest, Hungary av Also at Giresun University, Faculty of Engineering, Giresun, Turkey aw Also at CPPM, Aix-Marseille Université and CNRS/IN2P3, Marseille, France ax Also at Department of Physics, Nanjing University, Jiangsu, China ay Also at University of Malaya, Department of Physics, Kuala Lumpur, Malaysia az Also at LAL, Univ. Paris-Sud, CNRS/IN2P3, Université Paris-Saclay, Orsay, France ∗ Deceased 123