Airworthiness Directives; Rolls-Royce Corporation Turboshaft Engines
Transportation Department; Federal Aviation Administration · 2018
Read Airworthiness Directives; Rolls-Royce Corporation Turboshaft Engines by Transportation Department; Federal Aviation Administration (2018) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2018-14801.txt.
Description
Rule published in the Federal Register on 2018-07-12 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 32203-32206] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2018-14801] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2017-1118; Product Identifier 2017-NE-40-AD; Amendment 39-19313; AD 2018-13-01] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce Corporation Turboshaft Engines AGENCY: Federal Aviation Administration (FAA), DOT.
Catalog record
| CREATOR | Transportation Department; Federal Aviation Administration |
|---|---|
| YEAR | 2018 |
| COLLECTION | LAW |
| FORMAT | TXT |
| FILE SIZE | 18 KB |
| VERSION | 1.0 |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | Federal Register |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Airworthiness Directives; Rolls-Royce Corporation Turboshaft Engines Citation: us:fr:2018-14801 Creator: Transportation Department; Federal Aviation Administration Year: 2018 Source-URL: https://www.federalregister.gov/documents/2018/07/12/2018-14801/airworthiness-directives-rolls-royce-corporation-turboshaft-engines Context: Rule published in the Federal Register on 2018-07-12 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 32203-32206] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2018-14801] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2017-1118; Product Identifier 2017-NE-40-AD; Amendment 39-19313; AD 2018-13-01] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce Corporation Turboshaft Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Corporation (RRC) model 250-C turboshaft engines. This AD was prompted by several reports of engine power loss, one of which resulted in a fatal helicopter accident. This AD requires removal of the power turbine governor (PTG) bearing assembly, part number (P/N) 2544198, and its replacement with a bearing assembly eligible for installation. We are issuing this AD to address the unsafe condition on these products. DATES: This AD is effective August 16, 2018. ADDRESSES: For service information identified in this final rule, contact Rolls-Royce Corporation, 450 South Meridian Street, Mail Code NB-02-05, Indianapolis, IN 46225; phone: 317-230-3774; email: royce.com">[email protected]; internet: www.rolls-royce.com. You may view this service information at the FAA, Engine and Propeller Standards Branch, 1200 District Avenue, Burlington, MA. For information on the availability of this material at the FAA, call 781-238-7759. It is also available on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-1118. Examining the AD Docket You may examine the AD docket on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017- 1118; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the regulatory evaluation, any comments received, and other information. The address for Docket Operations (phone: 800-647- 5527) is Docket Operations, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: John Tallarovic, Aerospace Engineer, Chicago ACO Branch, FAA, 2300 E. Devon Ave., Des Plaines, IL 60018; phone: 847-294-8180; fax: 847-294-7834; email: [email protected]. SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Rolls-Royce Corporation (RRC) model 250-C turboshaft engines. The NPRM published in the Federal Register on February 1, 2018 (83 FR 4609). The NPRM was prompted by several reports of loss of engine power on certain RRC model 250-C turboshaft engines installed on single-engine helicopters. One of these instances of power loss resulted in a fatal helicopter accident on May 4, 2016. The NPRM proposed to require removal of the affected PTG bearing assembly and replace it with a bearing assembly with a new design. We are issuing this AD to address the unsafe condition on these products. Comments We gave the public the opportunity to participate in developing this final rule. The following presents the comments received on the NPRM and the FAA's response to each comment. Request To Specify the New Bearing Assembly The NTSB and Honeywell Aerospace requested that the AD prohibit the installation of bearing assembly, P/N 2544198, and specify the installation of the new bearing assembly, P/N 2526146. The NTSB expressed concern that differences between the proposed AD and the actions described in the Honeywell SB and Rolls-Royce CEBs could lead to the reinstallation of a dual-spool bearing into an affected PTG. We partially agree. We agree with the request to prohibit the installation of another bearing assembly, P/N 2544198, because our intent is to remove them from service. We disagree with the request to specify the installation of the new bearing assembly, P/N 2526146, because of the possibility of a new bearing P/N being introduced or the specified P/N being discontinued in the future. We added an installation prohibition paragraph to this AD to prohibit the installation of bearing assembly, P/N 2544198. Request To Re-Identify the PTG After Changing the Bearing Assembly The NTSB and Honeywell Aerospace requested that the AD require re- identifying the PTG P/N after changing the bearing assembly in accordance with the related service information. Honeywell Aerospace reasoned that maintenance personnel and operators could easily determine if the service bulletin has been accomplished. This increases the efficiency of operations and reduces the potential for misunderstandings about whether the bearing assembly has been replaced. We disagree. While re-identifying the PTG after changing the bearing assembly is helpful for maintenance personnel, we are not requiring this action within this AD. During the replacement of the bearing assembly, P/N 2544198, the related service information instructs personnel to re-identify the PTG. We did not change this AD. Request To Reduce the Compliance Time Honeywell Aerospace requested that we reduce the compliance time to 50 hours or within 90 days for PTGs that have greater than 750 hours. The commenter reasoned that the original compliance schedule was established 10 years ago based on field experience at that time. The fatal accident referenced in the NPRM occurred on a PTG with 1,048.7 hours since new. We disagree. The compliance time for removing the bearing assembly, P/N 2544198, in this AD is based on Rolls- [[Page 32204]] Royce Corporation Commercial Engine Bulletin (CEB) 1402, Revision 2, dated February 4, 2009. The failure history shows that the number of bearing assembly failures fell sharply following the initial publication of RRC CEB 1402 in 2008. The replacement strategy has proven successful. As a result, we believe that the majority of the fleet has replaced the bearing assembly, P/N 2544198, and only a few remain in service. Besides the fatal accident, there have not been any other bearing failures noted between 2012 and 2018. We, therefore, find it unnecessary to reduce the compliance time as noted by the commenter. We did not change this AD. Request To Increase the Number of Affected Engines Honeywell Aerospace noted that only 1,200 engines installed on airplanes of U.S. registry may be affected, compared with the 2,928 mentioned in the NPRM, based on a review of modification records provided to Honeywell by repair stations. We disagree. We are estimating the total number of engines affected by this AD based on the data available to us. We did not change this AD. Request To Clarify the Affected Engines An individual commenter requested that we clarify that only those engine models that have bearing assembly, P/N 2544198, installed are affected. We agree. We have updated paragraph (c) of this AD to clarify that engines with bearing assembly, P/N 2544198, installed are affected. Request To Identify the Model, Brand, and P/N of the PTG Aircraft Maintenance Netherlands requested that this AD identify the model, brand, and P/N of the affected PTG that must be replaced. The commenter reasoned that various PTG models can be installed on the affected engines. We disagree. This AD provides the overall engine model applicability. The related service information provides specific information regarding the PTGs, including the manufacturer, model, and P/Ns. We did not change this AD. Question on Not Issuing the AD Earlier