Airworthiness Directives; Cessna Aircraft Company (Cessna) Models 337, 337A (USAF 02B), 337B, 337C, 337D, 337E, T337E, 337F, T337F, 337G, T337G, M337B, F 337E, FT337E, F 337F, FT337F, F 337G, and FT337GP Airplanes
Transportation Department; Federal Aviation Administration · 2011
Read Airworthiness Directives; Cessna Aircraft Company (Cessna) Models 337, 337A (USAF 02B), 337B, 337C, 337D, 337E, T337E, 337F, T337F, 337G, T337G, M337B, F 337E, FT337E, F 337F, FT337F, F 337G, and FT337GP Airplanes by Transportation Department; Federal Aviation Administration (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-18242.txt.
Description
Rule published in the Federal Register on 2011-08-01 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 45657-45666] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-18242] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-0450; Directorate Identifier 2011-CE-010-AD; Amendment 39-16758; AD 2011-15-11] RIN 2120-AA64 Airworthiness Directives; Cessna Aircraft Company (Cessna) Models 337, 337A (USAF 02B), 337B.
Catalog record
| CREATOR | Transportation Department; Federal Aviation Administration |
|---|---|
| YEAR | 2011 |
| COLLECTION | LAW |
| FORMAT | TXT |
| FILE SIZE | 22 KB |
| VERSION | 1.0 |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | Federal Register |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Airworthiness Directives; Cessna Aircraft Company (Cessna) Models 337, 337A (USAF 02B), 337B, 337C, 337D, 337E, T337E, 337F, T337F, 337G, T337G, M337B, F 337E, FT337E, F 337F, FT337F, F 337G, and FT337GP Airplanes Citation: us:fr:2011-18242 Creator: Transportation Department; Federal Aviation Administration Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/08/01/2011-18242/airworthiness-directives-cessna-aircraft-company-cessna-models-337-337a-usaf-02b-337b-337c-337d-337e Context: Rule published in the Federal Register on 2011-08-01 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 45657-45666] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-18242] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-0450; Directorate Identifier 2011-CE-010-AD; Amendment 39-16758; AD 2011-15-11] RIN 2120-AA64 Airworthiness Directives; Cessna Aircraft Company (Cessna) Models 337, 337A (USAF 02B), 337B, 337C, 337D, 337E, T337E, 337F, T337F, 337G, T337G, M337B, F 337E, FT337E, F 337F, FT337F, F 337G, and FT337GP Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires inspecting the wings for internal and external damage, repairing any damage, reinforcing the wings, installing operational limitation placards in the cockpit, and adding limitations to the airplane flight manual supplement. This AD was prompted by a review of installed Flint Aero, Inc. wing tip auxiliary fuel tanks, Supplemental Type Certificate (STC) SA5090NM. We are issuing this AD to detect and correct damage in the wings and to prevent overload failure of the wing due to the installation of the STC. Damage in the wing or overload failure of the wing could result in structural failure of the wing, which could result in loss of control. DATES: This AD is effective September 6, 2011. [[Page 45658]] The Director of the Federal Register approved the incorporation by reference of certain publications listed in the AD as of September 6, 2011. ADDRESSES: For service information identified in this AD, contact Flint Aero, Inc., 1942 Joe Crosson Drive, El Cajon, CA 92020; phone: (619) 448-1551; fax: (619) 448-1571; Internet: http://www.flintaero.com. You may review copies of the referenced service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (816) 329-4148. Examining the AD Docket You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The address for the Docket Office (phone: 800-647-5527) is Document Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Dara Albouyeh, Aerospace Engineer, FAA, Los Angeles Aircraft Certification Office, 3960 Paramount Blvd., Lakewood, CA 90712; phone: (562) 627-5222; fax: (562) 627-5210; e-mail: [email protected]. SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an AD that would apply to the specified products. That NPRM published in the Federal Register on May 4, 2011 (76 FR 25264). That NPRM proposed to require inspecting the wings for internal and external damage, repairing any damage, reinforcing the wings, installing operational limitation placards in the cockpit, and adding limitations to the Flint Aero, Inc. Airplane Flight Manual Supplement. Comments We gave the public the opportunity to participate in developing this AD. The following presents the comments received on the proposal and the FAA's response to each comment. Request To Remove Certain Steps From Appendix 1 Dennis L. Hamblin from Flint Aero, Inc. stated that steps 11, 13, and 14 should be removed from Appendix 1 of this AD. The inspection procedures in Appendix 1 are focused on damage caused by trimming of the close-out rib to allow passage of the fuel line. The Flint Aero, Inc. STC kit provides a close-out rib that replaces the Cessna close- out rib. This configuration allows for the passage of the fuel line. Additionally, the Flint Aero, Inc. STC kit provides reinforcement doublers for all added inspection openings/cutouts; therefore, there should be no unreinforced cutouts. We do not agree with the commenter. All steps in Appendix 1 are required to check for any damage to the affected close-out rib, spar cap, and cut-outs that may have been caused by an overload condition regardless of the STC installation configuration. We have not changed the final rule AD action based on this comment. Request To Incorporate Revised Service Information Flint Aero, Inc. issued a revision to Service Bulletin FA2 to correct a part number reference. We inferred that Flint Aero, Inc. wanted the FAA to include reference to the revised service bulletin into the final rule AD action. We agree. We have revised the final rule AD action to incorporate the revised service bulletin. Conclusion We reviewed the relevant data, considered the comments received, and determined that air safety and the public interest require adopting the AD with the change described previously and any minor editorial changes. We have determined that these minor changes: [Agr]re consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and Do not add any additional burden upon the public than was already proposed in the NPRM. We also determined that these changes will not increase the economic burden on any operator or increase the scope of the AD. Costs of Compliance We estimate that this AD affects 33 airplanes of U.S. registry. We estimate the following costs to comply with this AD: Estimated Costs ---------------------------------------------------------------------------------------------------------------- Cost on U.S. Action Labor cost Parts cost Cost per product operators ---------------------------------------------------------------------------------------------------------------- Inspection of the wing for 5 work-hours x $85 Not applicable.... $425 per $14,025 per damage. per hour = $425 inspection cycle. inspection cycle. per inspection cycle. Fabricating and installing 1 work-hour x $85 Not applicable.... $85............... $2,805. placards in the cockpit. per hour = $85. Modifying the Limitations .5 work-hour x $85 Not applicable.... $42.50............ $1,402.50. section of the Flint Aero, per hour = $42.50. Inc. Airplane Flight Manual Supplement. Reinforcing the upper wing 25 work-hours x $85 $1,070............ $3,195............ $105,435. skin, stringer, and wing front per hour = $2,125. spar cap. ---------------------------------------------------------------------------------------------------------------- Authority for This Rulemaking Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority. We are issuing this rulemaking under the authority described in subtitle VII, part A, subpart III, section 44701: ``General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on [[Page 45659]] products identified in this rulemaking action. Regulatory Findings This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and