Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 2000 Airplanes
Transportation Department; Federal Aviation Administration · 2011
Read Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 2000 Airplanes by Transportation Department; Federal Aviation Administration (2011) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/uslaw-fr-2011-17576.txt.
Description
Rule published in the Federal Register on 2011-07-15 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 41665-41667] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-17576] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-0307; Directorate Identifier 2010-NM-111-AD; Amendment 39-16747; AD 2011-14-12] RIN 2120-AA64 Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 2000 Airplanes AGENCY: Federal.
Catalog record
| CREATOR | Transportation Department; Federal Aviation Administration |
|---|---|
| YEAR | 2011 |
| COLLECTION | LAW |
| FORMAT | TXT |
| FILE SIZE | 16 KB |
| VERSION | 1.0 |
| LICENSE | Public Domain |
| RIGHTS | PUBLIC DOMAIN |
| SOURCE | Federal Register |
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 2000 Airplanes Citation: us:fr:2011-17576 Creator: Transportation Department; Federal Aviation Administration Year: 2011 Source-URL: https://www.federalregister.gov/documents/2011/07/15/2011-17576/airworthiness-directives-saab-ab-saab-aerosystems-model-saab-2000-airplanes Context: Rule published in the Federal Register on 2011-07-15 by Transportation Department; Federal Aviation Administration. Text from federalregister.gov (official edition: govinfo). [Pages 41665-41667] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-17576] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-0307; Directorate Identifier 2010-NM-111-AD; Amendment 39-16747; AD 2011-14-12] RIN 2120-AA64 Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 2000 Airplanes AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: A report has been received of an incident where one of the two bolts attaching the actuator mounting bracket to the MLG [main landing gear] Shock Strut was found loose, leading to failure of the other attachment bolt, subsequently resulting in failure of the bracket. This condition, if not detected and corrected, could prevent the MLG to extend to the full down-and-locked position, possibly resulting in MLG collapse upon landing or during roll-out, with consequent damage to the aeroplane and injury to the occupants. * * * * * We are issuing this AD to require actions to correct the unsafe condition on these products. DATES: This AD becomes effective August 19, 2011. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of August 1, 2011. ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov or in person at the U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC. FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 227-1112; fax (425) 227-1149. SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an AD that would apply to the specified products. That NPRM was published in the Federal Register on April 8, 2011 (76 FR 19719). That NPRM proposed to correct an unsafe condition for the specified products. The MCAI states: A report has been received of an incident where one of the two bolts attaching the actuator mounting bracket to the MLG Shock Strut was found loose, leading to failure of the other attachment bolt, subsequently resulting in failure of the bracket. This condition, if not detected and corrected, could prevent the MLG to extend to the full down-and-locked position, possibly resulting in MLG collapse upon landing or during roll-out, with consequent damage to the aeroplane and injury to the occupants. To correct this potentially unsafe condition, SAAB has published Service Bulletin (SB) 2000-32-073, describing a [detailed] inspection of the attachment bolts [and nuts] to detect any loose bolts [and nuts], follow-up corrective action(s), depending on findings, and the installation of the correct number of washers. For the reasons described above, this EASA AD requires the accomplishment of the actions described in SAAB SB 2000-32-073. Required actions, if any loose parts are found, include replacing the bolt with a new bolt, and then doing a detailed inspection of the bolts for uniform or fretting corrosion; a detailed inspection of the actuator mounting bracket and shock struts for damage, cracks, and signs of corrosion; and doing corrective actions if necessary. Corrective actions include removing corrosion, replacing affected bolts with new bolts, tightening loose nuts, repairing, and installing the correct number of washers. You may obtain further information by examining the MCAI in the AD docket. Comments We gave the public the opportunity to participate in developing this AD. We received no comments on the NPRM or on the determination of the cost to the public. Conclusion We reviewed the available data and determined that air safety and the public interest require adopting the AD as proposed. Differences Between This AD and the MCAI or Service Information We have reviewed the MCAI and related service information and, in general, agree with their substance. But we might have found it necessary to use different words from those in the MCAI to ensure the AD is clear for U.S. operators and is enforceable. In making these changes, we do not intend to differ substantively from the information provided in the MCAI and related service information. We might also have required different actions in this AD from those in the MCAI in order to follow our FAA policies. Any such differences are highlighted in a NOTE within the AD. Costs of Compliance We estimate that this AD will affect about 8 products of U.S. registry. We also estimate that it will take about 1 work-hour per product to comply with the basic requirements of this AD. The average labor rate is $85 per work-hour. Required parts will cost about $1,039 per product. Where the service information lists required parts costs that are covered under warranty, we have assumed that there will be no charge for these parts. As we do not control warranty coverage for affected parties, some parties may incur costs higher than estimated here. Based on these figures, we estimate the cost of this AD to the U.S. operators to be $8,992, or $1,124 per product. In addition, we estimate that any necessary follow-on actions would take about 10 work-hours and require parts costing $1,039, for a cost of $1,889 per [[Page 41666]] product. We have no way of determining the number of products that may need these actions. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ``Subtitle VII: Aviation Programs,'' describes in more detail the scope of the Agency's authority. We are issuing this rulemaking under the authority described in ``Subtitle VII, Part A, Subpart III, Section 44701: General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this AD: 1. Is not a ''significant regulatory action'' under Executive Order 12866; 2. Is not a ''significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic impact,